Westermo | MR-270 | User manual | Product Guide
Add to my manuals44 Pages
The Westermo MR-270 is a versatile industrial router designed for demanding applications in harsh environments. It features dual Ethernet ports, a serial port, and a USB port, providing flexible connectivity options for various industrial devices. The MR-270 supports advanced routing protocols, including RIP, OSPF, and BGP, enabling efficient network management and routing. With its robust design and wide operating temperature range, the MR-270 is ideal for use in industrial automation, transportation, and energy distribution systems, where reliability and performance are critical.
advertisement
▼
Scroll to page 2
of 44
Product Guide Industrial Data Communications Industrial Data Communications Heritage Produced by: Westermo Teleindustri AB Photo: IStockphoto, BildN, Västerås, Sweden Illustrations: Visual Information Sweden AB Eskilstuna, Sweden Specifications are subject to change without notice due to continuous product development and improvement. 2 Westermo was established in 1975. The head office is located 150 km (93.2 miles) southwest of Stockholm in Sweden. Over the past three decades Westermo has grown with subsidiaries being established in Sweden, UK, Germany, France, Singapore, North America, Taiwan and sales partners appointed in over 35 countries worldwide. The first Westermo data communications product was an RS-232 line driver called the KM-1 that allowed data to be transmitted over great distances using twisted pair cables. Today we still sell a product, the MD-12, that is plug compatible with this device. In the 1990s Westermo created the world’s first industrial DIN rail mount telephone modem the TD-22 pioneering remote access solutions for industrial devices like PLCs and HMIs. In 2008 Westermo was acquired by The Bejier Electronics Corporation based in Malmo Sweden. Westermo now forms part of the Beijer Industrial Data Communications division. www.westermo.com A product range to meet every requirement Westermo provides a full range of data communications solutions for demanding applications in the transport, water and energy markets among others. For the past 35 years, we have been at the forefront of technological development and often push the limits of what is technically possible. The staff at Westermo offers the highest possible service to help customers to select, configure and install the best solution for their specific needs. Our knowledge goes far beyond our own product range, regardless of whether the installation is in a substation, water treatment plant or alongside a railway. In order to provide the best possible support, we have local presence in more than 35 countries through our authorized distributors and own offices. Quality Westermo strives for the highest quality. To this end, we will endeavour to supply products, goods and services in a courteous fashion that reflects our commitment to the Quality Policy as summarized below, therefore, we will; · Understand our customer’s requirements and needs as well as relevant regulations, so as to develop, manufacture and offer the right products. · Give our customers excellent support throughout the entire business process. · Keep up our never ending commitment for even better quality and effectiveness. This gives and will continue to give us stability, long term growth and profitability. Technical support Westermo has always believed in providing the best technical service possible to help you, our customer, get your systems operational. All our subsidiaries employ significant technical support departments that allow us to give free of charge telephone technical support in a number of languages during normal office hours. We also commit many hours to working with other product vendors to produce product application notes that can be downloaded from the web at anytime. For more information about products and services from Westermo, please visit our website at www.westermo.com. Contents Ethernet Switches 4 – 15 Ethernet Extenders 16 – 19 Routers 20 – 22 Modems 24 – 29 Converters 30 – 33 Accessories 34 – 39 3 Ethernet Switches … … … … Managed Switches Unmanaged Switches Managed PoE Ethernet Switch Unmanaged PoE Ethernet Switch The Westermo range of industrial Ethernet switches are designed for use in harsh environments and allow you to build cost-effective, reliable, secure networks. Whether you require an unmanaged switch for a point to point link, a managed switch for redundancy or a layer 3 switch for network routing, our extensive knowledge of the various standards used in railway, defence, water treatment, substation automation and road applications means we have the ideal solution, regardless of the environment. 4 Switches that can withstand all industrial environments 5 Westermo Delivers Robust Industrial Networks The traditional Westermo values of robustness and reliability in hardware design are now complemented by the WeOS network software solution. Over the last few years, Westermo has worked to develop this market leading software solution that operates on a range of Westermo’s most robust hardware platforms. Robustness Westermo hardware is designed and externally verified to work in the harshest industrial environments over a long service life. Cyber Security With virtually every network today somehow connected to the Internet, WeOS can deliver firewall functionality to every port on the network. Resilience Westermo networks are mission critical and designed to operate even when there are media or power failures on parts of the system. Multimedia Support Fibre, UTP, RS-232, RS-485, VDSL2, ADSL and any twisted pair cable are all supported within the WeOS family of products. Network Application Support Industrial protocols come in many different formats; however, Westermo’s expertise and WeOS legacy serial support allows simple migration to IP technology. Production Quality All WeOS products are manufactured at our own facility in Sweden to the highest quality standards. 6 WeOS Visit our website for more information www.westermo.com Managed Ethernet Switches WeOS Product/Art. no L105-S1 3643-0210 L105-S1-EX 3643-5210 L205-S1 3643-0215 L205-S1-EX 3643-5215 L106-S2 3643-0220 L106-S2-EX 3643-5220 L206-S2 3643-0225 L206-S2-EX 3643-5225 L108-F2G-S2 3643-0200 L108-F2GS2-EX 3643-5200 Ethernet Switches Description 2 Managed Device Server Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Digital I/O. 1 x RS-232, RJ-45. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Device Server Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Digital I/O. 1 x RS-232, RJ-45. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Device Server Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Digital I/O. 1 x RS-232, RJ-45. 1 x RS-232/422/485, RJ-45. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Device Server Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Digital I/O. 1 x RS-232, RJ-45. 1 x RS-232/422/485, RJ-45. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Device Server Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x RS-232, RJ-45. 1 x RS-232/422/485, RJ-45. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). 7 WeOS Product/Art. no L208-F2G-S2 3643-0205 L208-F2GS2-EX 3643-5205 L106-F2G 3643-0230 L106-F2G-EX 3643-5230 L206-F2G 3643-0235 L206-F2G-EX 3643-5235 L110-F2G 3643-0100 L110-F2G-EX 3643-5100 L210-F2G 3643-0105 L210-F2G-EX 3643-5105 8 Description 2 Managed Device Server Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x RS-232, RJ-45. 1 x RS-232/422/485, RJ-45. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Ethernet Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Ethernet Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x USB. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Ethernet Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Managed Ethernet Switch with Routing Functionality 8 x 10/100 Mbit/s, Ethernet TX, RJ-45 2 x 100/1000 Mbit/s, pluggable connections transceivers supported. Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Ethernet Switches WeOS Product/Art. no Description RFI-207F4G-T3G Industrial Routing Switch 3 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-211T3G Industrial Routing Switch 3 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. 8 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F) RFI-211F4G-T7G Industrial Routing Switch 7 x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ-45. 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-219T3G Industrial Routing Switch 3x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. 16 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-215F4G-T3G Industrial Routing Switch 3 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. 8 x 10/100 Mbit/s, Ethernet TX, RJ-45. 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-219F4G-T7G Industrial Routing Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ-45. 7 x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ-45 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). 3641-4210 3641-4110 36414310 3641-4100 3641-4200 3641-4300 Ethernet Switches 9 WeOS Product/Art. no Description RFI-10-F8 Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 8 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-18-F8 Industrial Routing Switch 10 x 10/100 Mbit/s, Ethernet TX, RJ-45. 8 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-18-F16 Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 16 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-14-F4GF8 Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 8 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFI-219F4G-T7G-F8 Industrial Routing Switch 7 x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ-45. 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 8 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x micro USB, console. 1 x USB. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). RFR-212-FB EN50155 Backbone Routing Switch 12 x 10/100 Mbit/s, Ethernet TX, M12. Dual by-pass relays. 1 x M12 USB configuration plug. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). 3641-3410 3641-3400 3641-3420 3641-3220 3641-4320 3641-1640 10 Ethernet Switches Product/Art. no Description Viper-408 EN50155 M12 Switch 8 x 10/100 Mbit/s, Ethernet TX, M12. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-408 with E-mark EN50155 M12 Switch 8 x 10/100 Mbit/s, Ethernet TX, M12. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). 3641-0360 3641-6360 WeOS Product/Art. no Description Viper-112 EN50155 Switch 12 x M12, 10/100 Mbit/s, Ethernet TX. 1 x USB. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-212 EN 50155 Routing Switch 12 x 10/100 Mbit/s, Ethernet TX, M12. 1 x USB. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-112T3G EN 50155 GigE Switch 9 x 10/100 Mbit/s, Ethernet TX, M12. 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x USB. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-212T3G EN 50155 GigE Routing Switch 9 x 10/100 Mbit/s, Ethernet TX, M12. 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x USB. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Product/Art. no. Description MDI-110-F3 Fast Ethernet Switch 7 x 10/100 Mbit/s, Ethernet TX, RJ-45. 3 x 10/100 Mbit/s, Ethernet TX or 100 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 10 to 60 VDC Operating temperature: –25 to 70ºC (–13 to +158°F). 3641-0555 3641-0560 3641-0530 3641-0550 3624-0200 Ethernet Switches 11 Product/Art. no. Description MDI-110F3G Gigabit Ethernet Switch 7 x 10/100 Mbit/s, Ethernet TX, RJ-45. 3 x 10/100/1000 Mbit/s, Ethernet TX or 100/1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 10 to 60 VDC Operating temperature: –25 to 70ºC (–13 to +158°F). MDI-112F4G Gigabit Ethernet Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. 2 x 1000 Mbit/s, Ethernet FX, SFP. Operating voltage: 10 to 60 VDC . Operating temperature: –25 to 70ºC (–13 to +158°F). MDI-118F2G Gigabit Ethernet Switch 16 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 10 to 60 VDC Operating temperature: –25 to 70ºC (–13 to +158°F). MRI-128F4G Gigabit Rack-mount Switch 24 x 10/100 Mbit/s, Ethernet TX, RJ-45. 4 x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 90 – 264 VAC. Operating temperature: –25 to 70ºC (–13 to +158°F). MRI-128F4G/DC Gigabit Rack-mount Switch 24 x 10/100 Mbit/s, Ethernet TX, RJ-45. 4 x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, FP combo ports. Operating voltage: 12 to 48 VDC. Operating temperature: –25 to 70ºC (–13 to +158°F). 3624-0210 3624-0250 3624-0260 3624-0340 3624-0350 Unmanaged Ethernet Switches Product/Art. no Description SDW-500series Industrial Ethernet 5-port Switch SDW-532 3 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100 Mbit/s, Ethernet FX, LC, SC or ST connector. SDW-541 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 100 Mbit/s, Ethernet FX, LC, SC or ST connector. SDW-550 5 x 10/100 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 9.6 to 57.6 VDC. Operating temperature: –25 to +70ºC (–13 to +158°F). 3644-xxxx SDW-500 EX-series 3644-xxxx 12 Ethernet Switches Product/Art. no Description Viper-008 EN50155 M12 Switch 8 x 10/100 Mbit/s, Ethernet TX, M12. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Viper-012 EN50155 Switch 12 x 10/100 Mbit/s, Ethernet TX, M12. 1 x Service ports that must not be used. Operating voltage: 16.8 to 143 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). 3641-0340 3641-0540 Product/Art. no. Description SDI-541MM-SC2 5-port Ethernet Fibre Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 100 Mbit/s, Ethernet FX, Multi-mode 2 km, SC connector. 1 x Power/Relay, 4-pin terminal block. Operating voltage: 18 to 32 VDC or 18 to 27 VAC. Operating temperature: –10 to +60ºC (14 to +140°F). SDI-541SM-SC30 5-port Ethernet Fibre Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 100 Mbit/s, Ethernet FX, Single-mode 30 km, SC connector. 1 x Power/Relay, 4-pin terminal block. Operating voltage: 18 to 32 VDC or 18 to 27 VAC. Operating temperature: –10 to +60ºC (14 to +140°F). SDI-550 5-port Ethernet Switch 5 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Power/Relay, 4-pin terminal block. Operating voltage: 18 to 32 VDC or 18 to 27 VAC. Operating temperature: –20 to +70ºC (–14 to +158°F). SDI-862MM-SC2 8-port Ethernet Fibre Switch 6 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100 Mbit/s, Ethernet FX, Multi-mode 2 km, SC connector. 1 x Alarm relay, Terminal block connector with 1 A @ DC 24 V carry ability. Operating voltage: 10 to 60 VDC. Operating temperature: –10 to +70ºC (–13 to +158°F). SDI-862SM-SC30 8-port Ethernet Fibre Switch 6 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100 Mbit/s, Ethernet FX, Single-mode 30 km, SC connector. 1 x Alarm relay, Terminal block connector with 1 A @ DC 24 V carry ability. Operating voltage: 10 to 60 VDC. Operating temperature: –10 to +70ºC (–13 to +158°F). SDI-880 8-port Ethernet Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x Alarm relay, Terminal block connector with 1 A @ DC 24 V carry ability. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +70ºC (–13 to +158°F). 3625-0001 3625-0010 3625-0050 3625-0110 3625-0120 3625-0100 Ethernet Switches 13 Managed PoE Ethernet Switches WeOS Product/Art. no Description Viper-112-P8 EN 50155 PoE Switch 12 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 1 x USB. 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-212-P8 EN 50155 PoE Routing Switch 12 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 1 x USB. 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-112T3G-P8 EN 50155 PoE GigE Switch 9 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x USB. 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Viper-212T3G-P8 EN 50155 PoE GigE Routing Switch 9 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x USB. 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). Product/Art. no. Description PMI-110F2G Managed PoE Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX or 100/1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 46 to 57 VDC. Operating temperature: –40 to +70°C (–40 to +158°F). MRI-128F4G-PSE24 Rackmount PoE Switch 24 x 10/100 Mbit/s Ethernet TX, PoE. 4 x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s Ethernet FX SFP combo ports Operating voltage: 46 to 57 VDC or 90 to 264 VAC. Operating temperature: –25 to +65°C (–13 to +149°F). 3641-0580 3641-0590 3641-0570 3641-0595 3626-0200 3624-0370 14 Ethernet Switches Unmanaged PoE Ethernet Switches Product/Art. no. Description PSI-660G PoE booster Switch 4 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 12 to 24 VDC. Operating temperature: –25 to +60°C (–13 to +140°F). PSI-1010G24V PoE booster Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 12 to 24 VDC. Operating temperature: –25 to +60°C (–13 to +140°F). PSI-1010G48V PoE Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 46 to 57 VDC. Operating temperature: –25 to +70°C (–13 to +158°F). PSI-1010F2G-48V PoE Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x SFP Gigabit fibre. Operating voltage: 46 to 57 VDC. Operating temperature: –25 to +60°C (–13 to +140°F). 3626-0100 3626-0110 3626-0120 3626-0150 Ethernet Switches 15 Ethernet Extenders … Point-to-point … Managed network The Westermo Wolverine series of industrial Ethernet extenders allow cost-effective Ethernet networks to be created over long distances, at high data rates. The SHDSL technology employed makes it possible to reuse many types of pre-existing cabling which in turn can lead to considerable financial savings. With support for multidrop networks, redundant rings, legacy serial connections and layer 3 routing functions, our range of Ethernet extenders can meet any demand your application requires. 16 Extend your network far beyond the normal limits of Ethernet 17 Point-to-Point Ethernet Extenders Product/Art. no DDW-120 3621-0110 DDW-120 EX 3621-5110 Description Ethernet SHDSL Extender 1 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 192 kbit/s to 15.3 Mbit/s, DSL, 2 position detachable scerw terminal. 1 x 115.2 kbit/s, Diagnostic port, 2.5 mm jack. Operating voltage: 9.6 to 57.6 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Managed Network Ethernet Extenders Product/Art. no DDW-220 3642-0200 DDW-222 3642-0220 18 Description Industrial Ethernet Extender 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 192 kbit/s to 5.7 Mbit/s, DSL, 2-position detachable screw terminal. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Ethernet extender with serial support 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, 9-pin D-sub (male). 2 x 192 kbit/s to 5.7 Mbit/s, DSL, 2-position detachable screw terminal. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Ethernet Extenders WeOS Product/Art. no DDW-142 3642-0300 DDW-142-EX 3642-5300 DDW-142485 3642-0310 DDW-225 3642-0250 DDW-225-EX 3642-5250 DDW-226 3642-0240 DDW-226-EX 3642-5240 Ethernet Extenders Description Industrial Ethernet Extender 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 32 kbit/s to 15.3 Mbit/s (30.4 with bonding), SHDSL, 2-position detachable screw terminal. 1 x 300 bit/s to 115.2 kbit/s, RS-232, RJ-45. 1 x Digital I/O, 4-position detachable screw terminal. 1 x USB. 1 x 2.5 mm jack, Console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Industrial Ethernet Extender 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 32 kbit/s to 15.3 Mbit/s (30.4 with bonding), SHDSL, 2-position detachable screw terminal. 1 x 50 bit/s to 2Mbit/s, 4-position detachable screw terminal 1 x Digital I/O, 4-position detachable screw terminal. 1 x USB. 1 x 2.5 mm jack, Console. Operating voltage: 19 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Redundant Ring Ethernet Extender 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 32 kbit/s to 15.3 Mbit/s, SHDSL, 2-position detachable screw terminal. 1 x Digital I/O, 4-position detachable screw terminal. 1 x 2.5 mm jack, Console. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). Ethernet extender with serial support Ethernet extender with serial support 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, 9-pin D-sub (male). 2 x 32 kbit/s to 15.3 Mbit/s, SHDSL 2-position detachable screw terminal. 1 x Digital I/O, 4-position detachable screw terminal. 1 x USB. 1 x 2.5 mm jack, Console. Operating voltage: 16 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). 19 Routers … Serial/PSTN Routers … Wireless Routers … Broadband DSL Routers Westermo provide a whole range of routers for use in demanding applications such as railways, water treatment, substation automation, roads and tunnels. Offering remote access solutions using ADSL or VDSL broadband and wireless 3G (UMTS, HSDPA, HSUPA) or GPRS technologies, Westermo ensures connections to your remote sites are resilient and reliable. As we know security is of paramount concern, all Westermo industrial routers include a powerful firewall to prevent unauthorised access. 20 Multiple media solutions for accessing your remote networks 21 Serial/PSTN Routers Product/Art. no Description ED-200 Ethernet Router 4 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, 9-pin D-sub (male). 1 x 300 bit/s to 115.2 kbit/s, RS-422/485 4-position detachable screw terminal. Operating voltage: 16 to 60 VDC. Operating temperature: –25 to +65ºC (–13 to +149°F). ED-210 Ethernet Router 4 x 10 Mbit/s, 100 Mbit/s, Ethernet TX, RJ-45. 1 x 600 bit/s to 33.6 kbit/s, 2 position detachable screw terminal, Leased Line. 1 x 600 bit/s to 33.6 kbit/s, PSTN, RJ-11C. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +65ºC (–13 to +149°F). 3609-5010 3609-5001 Wireless Routers Product/Art. no Description MRD-310 Industrial mobile broadband / 3G router GSM / GPRS / EDGE / 3G / HSPA. 2 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 1 x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: –30 to +70ºC (–22 to +158ºF). MRD-330 Industrial mobile broadband / 3G router GSM / GPRS / EDGE / 3G / HSPA. 2 x 10 Mbit/s or 100 Mbit/s., Ethernet TX, RJ-45. 3 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 2 x Digital Input, 2 x Digital Output. 1 x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: –30 to +70ºC (–22 to +158ºF). MRD-350 Industrial mobile broadband / 3G router GSM / GPRS / EDGE / 3G / HSPA. 2 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 2 x SIM slots. Operating voltage: 10 to 60 VDC. Operating temperature: –30 to +70ºC (–22 to +158ºF). MR-210 Mobile broadband router 1 x 10 Mbit/s or 100 Mbit/s., Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 2 x SIM slots. 1 x USB. Operating voltage: 9 to 48 VDC. Operating temperature: –20 to +60ºC (–4 to +140ºF). MR-260 Mobile broadband router 1 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 2 x SIM slots. 1 x USB. Operating voltage: 9 to 48 VDC. Operating temperature: –20 to +55ºC (–4 to +131ºF). 3623-0001 3623-0101 3623-0201 3622-0201 3622-0202 22 Routers Product/Art. no Description MR-270 Mobile broadband router 4 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 2 x SIM slots. 1 x USB. Operating voltage: 11 to 58 VDC. Operating temperature: 0 to +55ºC (32 to +131ºF). 3622-0205 Broadband DSL Routers WeOS Product/Art. no Description FDV-2061D-1S Industrial Broadband Router 4 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 50 bit/s to 115.2 kbit/s, RS-232, RJ-45. 1 x ADSL, ADSL2/ASDL2+/VDSL2, RJ-11. 1 x USB. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Operating temperature: –20 to +70ºC (–4 to +158ºF). Product/Art. no Description ADSL-350 Industrial ADSL Router 2 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, DB-9. 1 x ADSL, ADSL2/ASDL2+, RJ-11. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +70ºC (–13 to +158ºF). Product/Art. no Description DR-270 Multiple media ADSL/VDSL2 router 4 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, DB-9. 1 x ADSL / ADSL2 / ADSL2+ / ADSL2++/VDSL2, RJ-11. 2 x SIM. 1 x USB. Operating voltage: 9 to 36 VDC. Operating temperature: DR-270, DR-270 + 3G, –40 to +75ºC (–40 to +167ºF), DR-270 + WiFi, DR-270 + WiFi + 3G, –20 to +75 ºC (–4 to +131ºF). 3660-0100 3623-0301 3622-xxxx 3622-0310 3622-0315 3622-0320 3622-0325 3622-0340 3622-0345 3622-0350 3622-0355 Multiple media ADSL/VDSL2 router DR-270A Multiple media ADSL/VDSL2 router DR-270A + WiFi Multiple media ADSL/VDSL2 router DR-270A + 3G Multiple media ADSL/VDSL2 router DR-270A + 3G + WiFi Multiple media ADSL/VDSL2 router DR-270B Multiple media ADSL/VDSL2 router DR-270B + WiFi Multiple media ADSL/VDSL2 router DR-270B + 3G Multiple media ADSL/VDSL2 router DR-270B + 3G + WiFi 4200-3006 4200-3010 Optional VPN tunnel extension upgrade; additional 50 Tunnels Optional VPN tunnel extension upgrade; additional 100 Tunnels Routers 23 Modems … … … … … … Fibre Optic Modems GSM/GPRS Modems ISDN Modems Leased Line / PSTN Modems Short Haul Modems Multidrop Modems Whether you need to communicate through a PSTN or ISDN line, across a private wire or leased line, down a fibre optic cable, or even over GSM/GPRS, Westermo have a solution. Our wide range of industrial modems is designed for use in such demanding applications as railways, water treatment, substation automation, roads and tunnels. All Westermo modems exceed industrial standards and ensure rugged, reliable communications. 24 Industrial data modems for the harshest environments 25 Fibre Optic Modems RS-232 / RS-485 Product/Art. no Description ODW-720-F1 Point-to-point fibre converter, RS-232 1 x Pluggable transceivers, SFP. 1 x 300 bit/s to 250 kbit/s, RS-232, D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +70°C (–40 to +158°F). 3651-0721 ODW-720-F1 EX 3651-3721 ODW-720-F2 3651-0722 ODW-720-F2 EX 3651-3722 ODW-730-F1 3651-0731 ODW-730-F1 EX 3651-3731 ODW-730-F2 3651-0732 ODW-730-F2 EX 3651-3732 Ring / multidrop fibre converter, RS-232 2 x Pluggable transceivers, SFP. 1 x 300 bit/s to 250 kbit/s, RS-232, D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +60°C (–40 to +140°F). Point-to-point fibre converter, RS-422/485 1 x Pluggable transceivers, SFP. 1 x 300 bit/s to 1.5 Mbit/s, RS-422/485, D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +70°C (–40 to +158°F). Ring / multidrop fibre converter, RS-422/485 2 x Pluggable transceivers, SFP. 1 x 300 bit/s to 1.5 Mbit/s RS-422/485, D-sub,. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +60°C (–40 to +140°F). PROFIBUS Product/Art. no Description ODW-710-F1 Point-to-point fibre converter, PROFIBUS 1 x Pluggable transceivers, SFP. 1 x 9 600 bit/s to 12 Mbit/s, PROFIBUS DP (RS-485), D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +70°C (–40 to +158°F). 3651-0711 ODW-710-F1 EX 3651-3711 ODW-710-F2 3651-0712 ODW-710-F2 EX 3651-3712 26 Ring / multidrop fibre converter, PROFIBUS 2 x Pluggable transceivers, SFP. 1 x 9 600 bit/s to 12 Mbit/s, PROFIBUS DP (RS-485), D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +60°C (–40 to +140°F). Modems LonWorks® Product/Art. no Description LRW-102 PP Fibre optic LON repeater for TP/FT-10, point-to-point 1 x pluggable transceivers, SFP 1 x 78.5 kbit/s, TP/FT-10, detachable screw terminal. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +60°C (–40 to +140°F). LRW-102 Fibre optic LON repeater for TP/FT-10, multidrop and redundant ring 2 x pluggable transceivers, SFP 1 x 78.5 kbit/s, TP/FT-10, detachable screw terminal. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: –40 to +60°C (–40 to +140°F). 3650-xxxx 3650-xxxx GSM / GPRS Modems Product/Art. no Description GDW-11 GSM modem, GSM/GPRS 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +50°C (–13 to +122°F). 3615-0001 GDW-11 EX 3615-5001 GDW-11 485 3615-0030 GDW-11 485 EX 3615-5030 GSM modem, GSM/GPRS 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 1200 bit/s to 115.2 kbit/s, RS-422/485. 1 x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +50°C (–13 to +122°F). ISDN Modems Product/Art. no Description IDW-90 3620-0001 Industrial ISDN Modem 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 300 bit/s to 115.2 kbit/s, RS-422/485. 1 x 300 bit/s to 128.0 kbit/s, ISDN. 1 x Digital I/O. Operating voltage: 10 to 60 VDC, 10 to 42 VAC. Operating temperature: +5 to +55°C (41 to +131°F). Modems 27 PSTN / Leased Line Modems PSTN Product/Art. no Description TDW-33 Industrial Telephone Modem 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). Operating voltage: 10 to 60 VDC or 10 to 42 VAC. Operating temperature: –25 to +70°C (–13 to +158°F). TD-36 Industrial PSTN and Leased Line Modem 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). Operating voltage: AV: 18 to 300 VDC, 22 to 264 VAC. LV: 12 to 48 VDC, 12 to 27 VAC. Operating temperature: –25 to +70°C (–13 to +158°F). TD-36 485 Industrial backup PSTN and Leased Line Modem 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 300 bit/s to 115.2 kbit/s, RS-422/485 1 x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). Operating voltage: AV: 18 to 300 VDC, 22 to 264 VAC. LV: 12 to 48 VDC, 12 to 27 VAC. Operating temperature: –25 to +70°C (–13 to +158°F). TR-36B Industrial Rack Modem Connected to rack RV-07B, see below. Operating voltage: 10 to 60 VDC. Operating temperature: –40 to +70ºC (–40 to +158°F). RV-07B 19” rack for TR-36B telephone and Leased Line modem 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 300 bit/s to 115.2 kbit/s, RS-422/485. 1 x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). 1 x Alarm output. Up to 16 x TR-36B’s and 2 x PSU. Operating voltage: LV : 10 to 60 VDC 10 to 30 VAC. HV: 48 to 300 VDC, 85.5 to 264 VAC. Operating temperature: –40 to +70°C (–40 to +158°F). 3619-0001 3618-xxxx 3618-xxxx 3614-0510 3130-3010 Leased Line Product/Art. no Description TD-23 Multidrop modem 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x 300 bit/s to 115.2 kbit/s, RS-422/485. 1 x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x Detachable screw terminal, Relay (optional). Operating voltage: LV : 10 to 60 VDC 10 to 30 VAC. HV: 48 to 300 VDC, 85.5 to 264 VAC. Operating temperature: –25 to +70°C (–13 to +158°F). TD-29 Multidrop FSK-modem 1 x 2400 bit/s to 19.2 kbit/s, RS-232. 1 x 2400 bit/s to 19.2 kbit/s, RS-422/485. 1 x 2400 bit/s to 19.2 kbit/s, FSK-Line. Operating voltage: DC: 12 – 36 VDC and 36 – 55 VDC. Operating temperature: +5 to +50°C (+41 to +122°F). 3600-xxxx 3611-xxxx 28 Modems Short Haul Modems RS-232, point-to-point Product/Art. no Description MD-12 Short-haul modem, point-to-point 1 x Up to 38.4 kbit/s, RS-232, D-sub. 1 x Up to 38.4 kbit/s, RS-232, detachable screw terminal. 1 x ±10 mA balanced current loop, Detachable screw terminal, Line connection. Operating voltage: 12 to 36 VDC. Operating temperature: +5 to +50°C (+41 to +122°F). –40 to +70ºC (–40 to +158°F). 3150-xxxx Multidrop Modems RS-232, multidrop Product/Art. no Description LD-02 Line sharing modem 1 x D-sub, up to 38.4 kbit/s, RS-232. 1 x Up to 38.4 kbit/s, RS-232, detachable screw terminal. 1 x Up to 38.4 kbit/s, RS-422/485, detachable screw terminal. 1 x ±10 mA balanced current loop, detachable screw terminal, line connection. Operating voltage: 12 to 36 VDC or 36 to 55 VDC or 207 to 264 VAC or 103 to 132 VAC. Operating temperature: +5 to +50°C (+41 to +122°F). 3156-xxxx Modems 29 Converters … … … … Serial Converters / Repeaters Current Loop Converters Ethernet Media Converters Protocol Converters Westermo can supply a range of converters / repeaters to suit a whole host of industrial protocols and communication methods, including Ethernet, RS-232, RS-422, RS-485, PROFIBUS DP, M-Bus and 20 mA current loop. Whether you need a fibre media converter for an Ethernet link, a serial converter, or a repeater for an RS-485 network, you can rest assure that Westermo have a solution which will operate in the harshest industrial environments and provide robust, reliable communications for peace of mind. 30 Industrial converters for industrial protocols 31 Serial Converters / Repeaters Product/Art. no Description EDW-100 Serial Adapter 1 x 10/100 Mbit/s, Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. 1 x 2400 bit/s to 19.2 kbit/s, RS-422/485, detachable screw terminal. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +70ºC (–13 to +158ºF). 3616-0020 EDW-100 EX 3616-5020 EDW-120 3616-0010 EDW-120 EX 3616-5010 Serial Adapter 1 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 300 bit/s to 115.2 kbit/s, RS-232, D-sub. Operating voltage: 10 to 60 VDC. Operating temperature: –25 to +70ºC (–13 to +158ºF). RD-48 RS-422/485 Repeater 2 x 300 bit/s to 1.5 Mbit/s, RS-422/485 detachable screw terminal. Operating voltage: LV : 9.6 to 57.6 VDC. HV: 85.5 to 264 VAC or 88 to 300 VDC Operating temperature: –40 to +70°C (–40 to 158°F). MDW-45 RS-422/485 Converter 1 x 1200 bit/s to 115.2 kbit/s, RS-232, D-sub. 1 x 300 bit/s to 1.5 Mbit/s, RS-422/485, detachable screw terminal. Operating voltage: LV : 9.6 to 57.6 VDC. HV: 85.5 to 264 VAC or 88 to 300 VDC. Operating temperature: –40 to +70°C (–40 to 158°F). 3153-xxxx 3617-0xxx MDW-45 EX 3617-5xxx Current Loop Converters Product/Art. no Description MD-21 20 mA Current loop converter 1 x Up to 19.2 kbit/s, RS-232, D-sub or detachable screw terminal. 1 x Up to 19.2 kbit/s, 20 mA current loop, detachable screw terminal. Operating voltage: AC: 207 to 264 VAC, 103 to 132 VAC. DC: 12 to 36 VDC, 36 to 55 VDC. Operating temperature: +5 to +50°C (+41 to 122°F). 3151-xxxx 32 Converters Ethernet Media Converters Product/Art. no Description MCW-211 3645-5xxx Industrial Ethernet Media Converter 1 x 10/100 Mbit/s, Ethernet TX. 1 x 100 Mbit/s, Ethernet FX. Operating voltage: 12 to 48 VDC. Operating temperature: –40 to +70ºC (–40 to +158ºF). Product/Art. no Description MCI-211G Gigabit Ethernet Media Converter 1 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. 1 x 1000 Mbit/s, pluggable transceivers, SFP. Operating voltage: 12 to 48 VDC. Operating temperature: –25 to +70ºC (–13 to +158ºF). MCI-422MM-SC2 2-channel Ethernet to Fibre Media Converter 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100 Mbit/s Fibre port, Multi-mode 2 km, SC connector. Operating voltage: 10 to 60 VDC. Operating temperature: –40 to +75ºC (–40 to +167ºF). MCI-422SM-SC30 2-channel Ethernet to Fibre Media Converter 2 x 10/100 Mbit/s, Ethernet TX, RJ-45. 2 x 100 Mbit/s Fibre port, Single-mode 30 km, SC connector. Operating voltage: 10 to 60 VDC. Operating temperature: –40 to +75ºC (–40 to +167ºF). 3645-0xxx MCW-211 EX 3624-0001 3624-0100 3624-0110 Protocol Converters M-Bus Converter AD-01 3612-0001 Converters M-Bus adapter 1 x Up to 9600 bit/s, RS-232, D-sub or detachable screw terminals. 2 x Up to 9600 bit/s, RS-232, detachable screw terminals. 2 x Up to 9600 bit/s, Detachable screw terminals, M-Bus slave. Operating voltage: 207 to 253 VAC. Operating temperature: 0 to +50ºC (32 to +122ºF). 33 Accessories … Optical transceivers … Power supplies … Cables and antennas As well as industrial data communications devices, Westermo can also supply a range of vital accessories to provide a complete a solution. Whether you require an industrial rated power supply, optical transceivers for use with our many fibre optic devices, or cables and antennas for a wireless application, Westermo has your needs covered. 34 Applying the finishing touches to your industrial application 35 Transceivers Westermo offer a wide selection of Small Form Pluggable (SFP) transceivers. The selection of transceivers are available in a variety of models and lengths offering transmission rages from 2 km to 120 km (1.2 mi to 74.5 mi) over fibre. The CX transceiver allows SFP ports to be used to connect an Ethernet RJ-45 cable. Contact Westermo for detailed information. Product Description Single Mode Transceivers Single Mode Transceivers are available in a variety of models. Transmission capacity from 100 Mbit to 1 Gibit and distances from 15 to 120 km (9.3 to 74.5 mi). Multi Mode Transceivers Multi Mode Transceivers are available in a variety of models. Transmission capacity from 100 Mbit to 1 Gibit and distances from 550 m to 60 km (1805 ft to 37.2 mi).. Bi-directional Transceivers Bi-Di Transceivers are available in a variety of models. 100 Mbit transmission capacity and distances from 2 km to 60 km. (1.2 mi to 37.2 mi) CX Transceiver CX transceivers links a SFP port to a copper-based network using a standard RJ-45 connection. 1 Gbit transmission capacity and 100 m (328 ft) distance. 36 Accessories Power Supplies / Adapters Westermo provides a set of industrially approved power supplies complying with many mayor safety approvals. The most common power supplies, PS-30 and PS-100, comes in a DIN-mounted housing and can operate in a extended temperature range. Product/Art. no Description PS-20 HV 3120-3101 Power supply for RV-07B Rated voltage: 100 to 240 VAC. Operating voltage: 90 to 254 VAC. PS-30 3125-0001 Power supply, DIN-rail Output: DC 24 to 28V / 30 W PSU. Input: 85 to 264 VAC, 85 to 375 VDC. PS-100/48 3125-0050 Power supply DIN-rail, PoE Ready PSU Output voltage: 48 to 56 VDC. *preset to: 48 V ± 0.5% @ 2.1 A. Input: AC 100 to 120 / 220 to 240 V (Auto Select), 47 to 63 Hz. (AC 85 to 132 V / AC 184 to 264 V, DC 220 to 375 V). Backup Device The USB-M12 is a configuration backup device designed to meet the full requirements of the rail vehicle market. This device can be used with the Viper 212, Viper 112 and RFR-12-FB, and allows the configuration of the switch to be saved. The device can then be left attached to the switch for easy maintenance exchange of units or alternatively, the device allows configurations to be updated by simply plugging in the unit and repowering. Product/Art. no Description USB M12 plug IP65 3641-0190 Electrical specification: USB v1.1. Data rate: Up to 480Mbit/s. Connection: M12 A-coded male. Memory size: 16 Mbyte. Accessories 37 Cables Special cables for reading diagnostics, antennas, radio, fibre and Ethernet are available in a variety of lengths and jacketing options. Please contact Westermo for further information. Product/Art. no Description Diagnostic cable Cable for diagnostic DDW-100 DDW-100 to RS-232 Diagnostic cable Cable for diagnostic DDW-120 and RedFox Console port to USB M12 cables M12 – M12. In length, 1 m, 5 m and 15 m (3.28 ft, 16.40 ft and 49.21 ft) M12-RJ45 cables M12 – RJ-45 In length, 1 m, 5 m and 15 m (3.28 ft, 16.40 ft and 49.21 ft) Power cables M12 In length, 1.5 m and 5 m (4.92 ft and 16.40 ft) 1211-2026 1211-2027 -6,167 GSM cables TZC SMA/F-SMA/M Cables for antennas. In length, 3 m, 5 m and 10 m (9.84 ft, 16.40 ft and 32.80 ft) Radio cables RG213 Cables for antennas. In length, 3 m, 5 m, 7 m, 10 m and 15 m (9.84 ft, 22.96 ft, 16.40 ft, 32.80 ft and 49.21 ft) 38 Accessories Antennas / Adapters Special antennas for radio and GSM are available in a variety of models. Please contact Westermo for further information. Product/Art. no Description CA-930D DIPOLE, 4 dBi 890 –960 MHz CA-860D CA-930Y-series CA-860Y-series YAGI, 6 dBi, 8 dBi and 10 dBi, 890 –960 MHz YAGI, 6 dBi, 8 dBi and 10 dBi, 830 –890 MHz EX07 Whip antenna with magnetic foot, 900/1800 MHz GS-23/M70EXR Low profile antenna CA-860Q Whip antenna with SMA connector, 830 –890 MHz CA-2400M Corner reflector antenna 2.4 GHz, N-connector Accessories 39 Westermo Quality and Approvals Westermo design and manufacture robust data communication devices for harsh environments. We supply products that provide the communication infrastructure, derived from proven commercial technology, for control and monitoring systems that are used in mission critical solutions where commercial grade products are not sufficiently resilient. To ensure the highest quality products, Westermo has a state of the art industrial electronics manufacturing facility in Sweden. To maximise the reliability of the product testing is carried out at many stages of the manufacturing process. …… …… …… …… …… Manufacturing to IPC-A-610 under ISO9001-2008 QMS Solder Paste Inspection and Automated Optical Inspection X-ray examination and PCB testing Functional testing Burn-in testing to EN-50155 8aVhh&!9^k' EVgi&*$+- EN 61000-6-2 EN 61000-6-3 EN 61000-6-4 EN 50121-4 EN 50155 >cYjhig^Va>bbjc^in 40 GZh^YZci^Va:b^hh^dc >cYjhig^Va:b^hh^dc GV^alVnIgVX`h^YZ Dc7dVgYGV^a EN 55022 >I::b^hh^dc Approvals Visit our website for the latest information on approvals We are constantly working to certify our products for use in various industrial environments. New approvals and certifications are added all the time so we encourage you to visit our website for the latest information, www.westermo.com …… A brief overview on product approvals can be found on each data sheet …… Detailed information about product approvals can be found in the User Guide and in the Technical Data section on the website …… For some industry-specific approvals, you can overview the complete supported product range in the Industries section You’ll find all product certificates in the downloads tab under Certificates. Approvals 41 H ea d O f f i ce Sweden Westermo SE-640 40 Stora Sundby Tel: +46 (0)16 42 80 00 Fax: +46 (0)16 42 80 01 [email protected] www.westermo.com Sales Units Westermo Data Communications China [email protected] www.cn.westermo.com France [email protected] www.westermo.fr Germany [email protected] www.westermo.de North America [email protected] www.westermo.com Singapore [email protected] www.westermo.com Sweden [email protected] www.westermo.se United Kingdom [email protected] www.westermo.co.uk Other Offices For complete contact information, please visit our website at www.westermo.com/contact or scan the QR code with your mobile phone. REV 2014-06 • 100-3870 Westermo Teleindustri AB, Sweden – A Beijer Electronics Group Company
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project