**2005 PRICE A4 singles AG

**2005 PRICE A4 singles AG
JULY 2006
Specialist
Electrical
JULYInstallation
2006
Company
This price list applies to all orders placed for delivery on or after 1st July 2006 and supercedes all previous
Solid State price lists.
Prices shown are our current UK trade prices in pounds (£) Sterling. Trade discounts may apply - contact
our Sales Desk for details.
Standard carriage is free on orders over £300.00 nett goods. Standard carriage on orders less than
£300.00 nett goods will be charged at £8.50 (UK mainland only). Carriage charges for other areas are
available on request.
An on-site delivery service is available at no extra cost. However, the nature of on-site deliveries (lack of
access, etc.), means that goods often have to be signed for by someone other than your selected
representative. Once a signature has been obtained, neither ourselves or our carrier can be held
responsible for the goods. Although we will endeavour to provide proof of delivery wherever possible,
no compensation can be claimed for any consequential loss.
An inspection and restocking charge of 15% will be made on returns (minimum £5.00 per consignment).
Minimum invoice value = £20.00 + VAT. VAT is charged extra at the current rate.
All goods supplied and services provided are subject to our standard Conditions of Sale, as detailed on
our Account Application Form, copies of which are available on request. Copies of our Customer Returns
Policy are also available on request.
Errors and omissions excepted. Every effort has been made to ensure the accuracy of this price list but
no responsibility can be accepted by Solid State for any mistakes.
Prices are subject to change without prior notice.
Our Sales Desk is open 9.00am to 5.00pm Monday to Friday, except for bank holidays, and over our
Christmas shutdown period.
Orders can be placed by telephone, fax or email using the details shown below:-
01257 463018
01257 462038
[email protected]
www.solidstatesecurity.co.uk
solidstatesecurity
Visit our website at
page 2
www.
.co.uk
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONTENTS
CONVENTIONAL FIRE ALARM EQUIPMENT
CFP Economy 2-8 Zone Conventional Fire Panels (to EN54-2/4) .................................................................................... 4
CFP Standard 2-8 Zone Conventional Fire Panels (to EN54-2/4)...................................................................................... 4
CFP LPCB Approved 2-8 Zone Conventional Fire Panels (to EN54-2/4) .......................................................................... 4
EFP Single Zone Conventional Fire Panels (to BS5839-4) ................................................................................................ 5
FP 2-14 Zone Conventional Fire Panels (to BS5839-4) ...................................................................................................... 5
MFP 4-28 Zone Conventional Fire Panels (to BS5839-4) .................................................................................................. 5
FP Automatic Extinguisher Panels .................................................................................................................................... 5
Fire Alarm Ancillaries (remote indicators, relays, device isolators and sounder circuit extenders) .............................. 6
24V Power Supplies ............................................................................................................................................................ 6
Electromagnetic Door Retainers ........................................................................................................................................ 6
Manual Call Points .............................................................................................................................................................. 6
E Range (Aurora) Conventional Smoke & Heat Detectors .............................................................................................. 7
Series 65/60 (Apollo) Conventional Smoke & Heat Detectors ........................................................................................ 7
Series H (Hochiki) Conventional Smoke & Heat Detectors .............................................................................................. 7
Series ECO1000 (System Sensor) Conventional Smoke & Heat Detectors ........................................................................7
Beam Detectors .................................................................................................................................................................. 7
Bells...................................................................................................................................................................................... 8
Sirens.................................................................................................................................................................................... 8
Bedhead Sounders .............................................................................................................................................................. 8
Strobes / Beacons ................................................................................................................................................................ 8
Sounder Strobe Combinations .......................................................................................................................................... 8
Vibrating Pads .................................................................................................................................................................... 8
24V VRLA Battery Packs .................................................................................................................................................... 8
TWO-WIRE CONVENTIONAL FIRE ALARM EQUIPMENT
CFP AlarmSense 2-8 Zone Two-Wire Fire Panels (to EN54-2/4) & Ancillaries.................................................................. 9
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
XFP 1-2 Loop Networkable Analogue Addressable Fire Panels (to EN54-2/4) ............................................................ 10
AFP 1-2 Loop Analogue Addressable Fire Panels (to EN54-2/4) .................................................................................... 10
XP95 Analogue Addressable Peripherals ........................................................................................................................11
Discovery Analogue Addressable Peripherals ................................................................................................................11
Xplorer Analogue Addressable Peripherals .................................................................................................................... 11
C-TEC manufactured Analogue Addressable Peripherals ..............................................................................................12
Hochiki ESP Analogue Addressable Peripherals ............................................................................................................ 12
Nittan Analogue Addressable Peripherals .................................................................................................................... 13
System Sensor Analogue Addressable Peripherals ........................................................................................................ 13
VOICE ALARM SYSTEMS
AVAC Voice Alarm System................................................................................................................................................ 14
PA/VA Systems .................................................................................................................................................................. 14
FIRE TELEPHONE SYSTEMS
SigTEL Fire Telephone System .......................................................................................................................................... 15
DISABLED PERSONS TOILET ALARMS
NC951 & NC951B Disabled Persons Toilet Alarm Kits .................................................................................................... 16
800 SERIES CONVENTIONAL CALL SYSTEM
800 Series Conventional Call System ......................................................................................................................16/17/18
800 Series Stainless Steel Call System .............................................................................................................................. 19
C-Call Waiting Room Call System .................................................................................................................................... 19
ADDRESSABLE CALL SYSTEMS / INFRARED STAFF PROTECTION SYSTEMS
Quantec Addressable Call System .............................................................................................................................. 20/21
INDUCTION LOOP EQUIPMENT
PDA Range Induction Loop Equipment and Ancillaries............................................................................................ 22/23
INFRARED ASSISTIVE LISTENING SYSTEMS
Infrared Assistive Listening System ..................................................................................................................................24
POWER SUPPLIES
12 & 24V Power Supply Units............................................................................................................................................25
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 3
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
CFP 2-8 ZONE EN54 FIRE PANELS
CFP ECONOMY 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include all CFP standard features except coincidence, zone delay and non-latching zone facilities.
CFP Economy panels are not compatible with CFP repeaters or CFP relay boards.
CFP702E-4
CFP Economy 2 zone panel, code entry version (unbranded)
£105.00
CFP702E-4K
CFP Economy 2 zone panel, keyswitch version (unbranded)
£110.00
CFP704E-4
CFP Economy 4 zone panel, code entry version (unbranded)
£130.00
CFP704E-4K
CFP Economy 4 zone panel, keyswitch version (unbranded)
£135.00
CFP708E-4
CFP Economy 8 zone panel, code entry version (unbranded)
£190.00
CFP708E-4K
CFP Economy 8 zone panel, keyswitch version (unbranded)
£195.00
• Fully compliant with EN54-2/4
• Attractive flush or surface mountable
plastic lid and enclosure
• Four conventional sounder circuits
• Class change and alert inputs
• Auxiliary fault, reset, remote and
aux. fire outputs
• Wide range of engineering functions
including zone test, non-latching
zones, programmable delays and
coincidence (dependent on model purchased)
• Access code and keyswitch variants
• Ancillary connections for up to eight
two-wire repeaters per system and
optional CFP relay boards
• Four CFP ranges are available:
CFP standard (4 wire) range
CFP economy (4 wire) range
CFP LPCB approved (4 wire) range
CFP AlarmSense (2 wire) range - see page 9
CFP STANDARD 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
CFP702-4
CFP Standard 2 zone panel, code entry version (C-TEC branded)
CFP702-4U
CFP Standard 2 zone panel, code entry version (unbranded)
£118.45
£118.45
CFP702-4K
CFP Standard 2 zone panel, keyswitch version (C-TEC branded)
£139.05
CFP702-4KU CFP Standard 2 zone panel, keyswitch version (unbranded)
£139.05
CFP704-4
CFP Standard 4 zone panel, code entry version (C-TEC branded)
£149.35
CFP704-4U
CFP Standard 4 zone panel, code entry version (unbranded)
£149.35
CFP704-4K
CFP Standard 4 zone panel, keyswitch version (C-TEC branded)
£169.95
CFP704-4KU CFP Standard 4 zone panel, keyswitch version (unbranded)
£169.95
CFP708-4
CFP Standard 8 zone panel, code entry version (C-TEC branded)
£226.60
CFP708-4U
CFP Standard 8 zone panel, code entry version (unbranded)
£226.60
CFP708-4K
CFP Standard 8 zone panel, keyswitch version (C-TEC branded)
£247.20
CFP708-4KU CFP Standard 8 zone panel, keyswitch version (unbranded)
£247.20
CFP760
CFP 8 zone repeater panel, code entry version (C-TEC branded), max 8 per system
£172.24
CFP760U
CFP 8 zone repeater panel, code entry version (unbranded), max 8 per system
£172.24
CFP760K
CFP 8 zone repeater panel, keyswitch version (C-TEC branded), max 8 per system
£180.88
CFP760KU
CFP 8 zone repeater panel, keyswitch version (unbranded), max 8 per system
£180.88
CFP761
CFP network driver card, one required per repeater system, fit at main
£60.34
CFP762
CFP relay output card, provides reset, fault, aux & remote relay outputs
£40.99
CFP763
CFP relay output per zone card, as CFP762 plus 8 output per zone relays
£63.19
CFP LPCB APPROVED 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include all CFP standard features except coincidence and non-latching zone facilities.
CFP702-4/LPC
CFP LPCB approved 2 zone panel, code entry
LPCB approved to EN54-2/4
£154.06
CFP704-4/LPC
CFP LPCB approved 4 zone panel, code entry
LPCB approved to EN54-2/4
£194.23
CFP708-4/LPC
CFP LPCB approved 8 zone panel, code entry
LPCB approved to EN54-2/4
£294.65
CFP ALARMSENSE 2-8 ZONE TWO WIRE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include all standard CFP features.
Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.
See our separate listing on page 9
ili
ty
ac
ty
ili
ity
ic
ns on
tio si
ec an
l
t
)f
y
nn exp
ci
os
ce ock
ng lit
fa
y
co
gn
hi ci
la
y em
en n
st
ia ies
tc s fa
id le-k
ar yst
te
de
d
l
a
t
c
l
l
t
i
i
c rs
in oub
ne
n- ne
ne
ul cil
Zo
A n fo
Zo
Co (d
Fa fa
No zo
c
fa
Which CFP?
CFP STANDARD PANELS
✔
✔
✔
✔
✔
CFP ECONOMY PANELS
✗
✗
✔
✔
✗
CFP LPCB APPROVED PANELS
✔
✗
✗
✗
✔
✔
✔
✔
This chart illustrates the different engineering functions available on the CFP range of fire panels
page 4
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
FP/MFP 1-28 ZONE BS FIRE PANELS
EFP SINGLE ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)
EFP panels are not compatible with FP repeaters or FP relay modules.
FF380-2
EFP1 single zone panel, does not extend
FF380X
EFPX expansion loom and terminals for EFP1
BF378M
MINIMU miniature EOL module (for head out monitoring on EFP1)
BF378
Electronic Monitoring Unit (for head out monitoring on EFP1)
£85.43
£2.71
£8.44
£16.55
FP 2-14 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)
• Fully compliant with BS5839-4
• Lift-off lid for easy first fix and
straightforward maintenance
• Robust metal enclosure with
heavy duty base connections
• Optional head removal facility
(fitted as standard to MFP panels)
• Non-latching “class change” input
• Latching fire and non-latching fault
outputs (via expansion loom)
• Short circuit = fire facility
(selectable on a zone by zone basis for
retro-installations)
• Ancillary connections for repeater
panels and other system add-ons
including expansion looms, fault
relays, sounder extender kits, etc
FF382-2
FP 2 zone panel, does not extend
FF384-2
FP 4 zone panel, extendable to 6 zones
£130.93
£200.43
FF386-2
FP 6 zone panel, does not extend
£234.96
FF388-2
FP 8 zone panel, extendable to 14 zones
£366.33
FF390-2
FP 10 zone panel,extendable to 14 zones
£400.88
FF392-2
FP 12 zone panel, extendable to 14 zones
£435.41
FF394-2
FP 14 zone panel, does not extend
£469.94
FF387Z-2
FP 2 zone extender pcb kit, use to extend FP panels
BF378M
MINIMU miniature EOL module (for head out monitoring on EFP/FP)
BF378
Electronic Monitoring Unit (for head out monitoring on EFP/FP)
£16.55
FF374FR
FP fault relay module
£33.07
£34.54
£8.44
FF374DFR
FP fire relay module
£33.07
FF374DT
FP sounder delay module
£33.07
FF374X
FPX expansion loom and terminals for use with FP 2-14 zone panels
FF396-2
FP 10 zone repeater panel
£125.06
FF398-2
FP 20 zone repeater panel
£187.62
FF379
Bezel for FP2
£25.11
FF385
Bezel for FP4 / FP6 / FP Repeaters
£27.61
FF387
Bezel for FP8 / FP10 / FP12 / FP14
£33.12
£10.99
MFP 4-28 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)
FF504
MFP 4 zone microprocessor panel, extendable to 12 zones
FF508
MFP 8 zone microprocessor panel, extendable to 12 zones
£231.18
£333.52
FF512
MFP 12 zone microprocessor panel, does not extend
£435.84
FF516
MFP 16 zone microprocessor panel, extendable to 28 zones
£633.46
FF520
MFP 20 zone microprocessor panel, extendable to 28 zones
£735.80
FF524
MFP 24 zone microprocessor panel, extendable to 28 zones
£838.13
FF528
MFP 28 zone microprocessor panel, does not extend
£940.47
FF501Z
MFP 4 zone extender pcb kit, use to extend MFP panels
£102.32
FF574X
MFPX expansion loom and terminals
FF596
MFP 8 zone repeater panel, extendable to 28 zones
FF596R
MFP 8 zone repeater extender kit, use to extend MFP repeaters
£41.55
FF596T
Repeater transmitter pcb kit, one required per repeater system
£166.46
FF385
Bezel for MFP4 / MFP8 / MFP12 / MFP Repeaters
£27.61
FF387
Bezel for MFP16 / MFP20 / MFP24 / MFP28
£33.12
£10.99
£185.19
FP AUTOMATIC EXTINGUISHER PANELS
• Now with optional environmental
sensing capabilities (requires one or
more add-on boards - see right for
details)
FP AUTOMATIC EXTINGUISHER PANELS
NEW
NEW
NEW
NEW
FF383H-2
FF384H
FF372/E
FF372/W
FF372/M
FP auto extinguisher panel (contact our Sales Desk for a list of features)
£358.97
FP auto extinguisher panel c/w FF372/E Multi-Purpose Environmental Board £418.25
Multi-Purpose Environmental Board ONLY
£62.16
Water sensing board ONLY (for use with FF372/E)
£33.35
Mains current sensing board ONLY (for use with FF372/E)
£56.50
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 5
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
FIRE ALARM ANCILLARIES
REMOTE INDICATORS, RELAYS, DEVICE ISOLATORS, SOUNDER EXTENDERS & SOUNDER ISOLATORS
BF318
Remote LED indicator, supplied on a single gang plate
£5.68
Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit
BF376
24V 5A relay on a plate, supplied on a single gang plate
£17.18
Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices
BF367
Auxiliary device isolator, supplied on a single gang plate
£23.74
Allows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventing
autodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance
BF366
24V 5A isolatable relay on a plate, supplied on a single gang plate
£35.00
Combines the functions of the BF376 5A relay and BF367 device isolator in one unit
FF502P
Four zone monitored sounder extender, supplied on a double gang plate
£41.55
Provides four extra sounder circuits with open and closed circuit fault monitoring,
two trigger inputs and one fault output
BF365SC
Sounder isolator controller, supplied on a double gang plate
£105.00
Can be interfaced to a conventional fire alarm sounder circuit - call our Sales Desk for details
BF365IM
Sounder isolator module (Max. 35 per BF365SC)
£20.34
24V POWER SUPPLIES
• A range of durable, reliable and
BF375P
BF375PK
cost-effective fire alarm ancillaries,
suitable for use with virtually all makes
of fire alarm panel. The range includes:-
24V 250mA unregulated door release PSU, supplied on a double gang plate
24V 250mA unregulated door release PSU kit
£41.33
£82.00
Includes one BF375P and one BF345/1H electromagnetic door retainer
BF375M
BF377
BF368EN
BF375PE
BF375PEK
• The BF318 remote LED indicator
• The BF376 24V 5A relay on a plate
• The BF367 auxiliary device isolator
24V 1A regulated general purpose boxed PSU
24V 2A unregulated door release boxed PSU
24 3A regulated boxed PSU to EN54/4
24V 250mA unregulated double gang door release psu c/w detector circuit
24V 250mA double gang automatic door release system
£77.96
£66.21
£175.00
£46.35
£186.15
Includes 1 x BF375PE double gang door release psu c/w detector circuit,
2 x Apollo optical detectors /bases; 1 x door retainer; 1 x NCP-10 flush back box
• The BF366 isolatable 24V 5A relay on a plate
• The FF502P four zone sounder extender
PLASTIC BACK BOXES
• Four 24V d.c. power supplies including a
NCP-8
NCP-9
NCP-10
NCP-11
250mA door release PSU, a 1A general
purpose PSU, a 2A door release PSU and
an EN54 compliant 3A switch mode PSU.
White
White
White
White
35mm
25mm
35mm
25mm
flush mount UK single gang back box
surface mount UK single gang back box
flush mount UK double gang back box
surface mount UK double gang back box
£1.72
£1.40
£2.44
£2.52
ELECTRO-MAGNETIC DOOR RETAINERS
NEW
NEW
NEW
NEW
NEW
NEW
BF345/1H
BF345/2H
BF345HB
BF345C/24/200
BF345C/230/200
BF345C/24/500
BF345CB
BF345C/FM24/200
BF345C/FM24/500
‘H’ Range 24V electromagnetic door retainer
‘H’ Range 240V a.c. electromagnetic door retainer
Floor mounting bracket for ‘H’ range door retainers
‘C’ Range 24V low profile door retainer, 200N, c/w keeper plate
‘C’ Range 230V a.c. low profile door retainer, 200N, c/w keeper plate
‘C’ Range 24V low profile door retainer, 500N, c/w keeper plate
Floor mounting bracket for’C’ range door retainers
24V floor mounting door retainer, 200N, c/w keeper plate
24V floor mounting door retainer, 500N, c/w keeper plate
£31.00
£32.35
£11.85
£30.42
£31.00
£84.14
£7.14
£63.22
£89.08
FIRE ALARM ACCESSORIES
MANUAL CALL POINTS
page 6
BF370R
BF370RF
BF370/R
BF370/W
BF371
BF370KRK
BF370FR
BF370FFR
BF371F/CX
BF370FRK/CX
BF370FC
BF370MR
BF370MFR
BF370KRK
BF370MC
BF372
‘KAC’ surface mounting crack glass fire call point, 470Ω
‘KAC’ flush mounting crack glass fire call point, 470Ω
‘KAC’ IP55 Rainproof crack glass fire call point
‘KAC’ IP67 Waterproof crack glass fire call point
Spare glass for ‘KAC’ crack glass fire call points
Test key for ‘KAC’ crack glass fire call points
‘FUL’ surface mounting crack glass fire call point, 470Ω
‘FUL’ flush mounting crack glass fire call point, 470Ω
Spare glass for ‘FUL’ crack glass fire call point
Test key for ‘FUL’ fire call points, pack of 10
Protective cover for ‘FUL’ fire call point
‘KAC’ No Break surface mounting fire call point, 470Ω
‘KAC’ No Break flush mounting fire call point, 470Ω
Test key for ‘KAC’ No Break fire call points
Protective cover for ‘KAC’ No Break fire call point
Yellow extinguishant release surface call point
£6.46
£6.01
£37.77
£74.97
£0.54
£0.55
£6.56
£6.01
£0.42
£5.55
£3.05
£8.21
£7.50
£0.55
£3.01
£17.37
CONVENTIONAL FIRE ALARM EQUIPMENT
SERIES E (AURORA) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302EH
BF303EH
BF316EH
BF308E
BF308EU
BF308ER
BF308ERD
S300 E Range fixed temperature heat detector, no base
S400 E Range rate of rise heat detector, no base
S100 E Range optical smoke detector, no base
ASB100 E Range standard base
AUBDR100 E Range universal base with 1K resistor and diode
ABLR100 E Range relay base with resistor
ABLRD100 E Range relay base with resistor and diode
£13.00
£13.00
£22.00
£5.00
£5.70
£17.00
£17.50
SERIES 65/60 (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302Z1H
BF302Z2H
BF302Z1HIS
BF302Z2HIS
BF303Z1H
BF303Z2H
BF315ZH
BF316ZH
BF317ZH
BF317ZH1
BF317ZHIS
BF308Z
BF308ZD
BF308ZR
BF308ZIS
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
65
65
60
60
65
65
60
65
65
65
60
65
65
65
60
55000-122 AIR (57oC) heat detector, no base
55000-127 BR (75oC) heat detector, no base
grade 1 intrinsically safe heat detector, no base
grade 2 intrinsically safe heat detector, no base
55000-132 CR (90oC) heat detector, no base
55000-137 CS (90oC) heat detector, no base
combined optical and heat detector, no base
55000-317 optical smoke detector, no base
55000-217 ionisation smoke detector, no base
55000-220 integrating ionisation smoke detector, no base
intrinsically safe ionisation smoke detector, no base
45681-200 base
45681-201 base with diode
45681-245 base with relay
intrinsically safe base
£13.50
£13.50
£60.00
£60.00
£13.50
£13.50
£56.75
£28.00
£28.00
£30.00
£68.57
£5.47
£6.42
£27.00
£10.00
SERIES H (HOCHIKI) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302HH1
BF302HH2
BF303HH1
BF303HH2
BF316HH
BF308H
BF308HD
BF308HR
AFP757
Series
Series
Series
Series
Series
Series
Series
Series
Series
H 60º fixed temperature heat detector, no base
H 90º fixed temperature heat detector, no base
H 60º combined heat and rate of rise detector, no base
H 90º combined heat and rate of rise detector, no base
H optical smoke detector, no base
H standard detector base
H detector base with diode
H detector base with relay
H outer cover removal tool
£20.20
£20.20
£20.20
£20.20
£25.00
£4.00
£5.66
£17.50
£ 97.75
SERIES ECO1000 (SYSTEM SENSOR) CONVENTIONAL SMOKE & HEAT DETECTORS
BF303WEH
BF316WEH
BF319WE
BF308WE
BF308WED
BF308WERB
BF309RTU
ECO1005 thermal detector, no base
ECO1003 optical smoke detector, no base
ECO1002 photo-thermal detector, no base
ECO1000B standard detector base ONLY
ECO1000BSD detector base c/w diode ONLY
ECO1000BREL 12/24V relay base
ECO1000RTU remote test unit
£15.50
£16.90
£24.23
£4.73
£5.86
£12.26
£26.46
BEAM DETECTORS
BF369BD
Fireray 2000 12-24V optical beam detector, 10-100m range
£441.54
NEW
BF369FB
Firebeam detector, 24V, 5-40m range, c/w 100 x 100mm reflector plate
£421.25
NEW
BF369FBA
Unistrut adapter plate for BF369FB
£37.17
NEW
BF369FBK1
Firebeam 40-80m extension kit for BF369FB c/w 250 x 250mm reflector plate
£59.52
NEW
BF369FBK2
Firebeam 80-100m extension kit for BF369FB c/w 350 x 350mm reflector plate
£158.58
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 7
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
BELLS
BF336
NEW
24V polarised fire bell, internal
£13.72
BF336C
24V polarised 6” fire bell
£13.00
BF336/W
24V polarised fire bell, weatherproof
£25.32
SIRENS
NEW
NEW
BF330CSR
24V red Vantage fire siren c/w shallow base
£17.40
BF330CSR/LPCB
24V red Vantage fire siren c/w shallow base (LPCB approved)
£18.57
BF330CSR/4
24V red Vantage fire siren c/w shallow base, 4 tones
£16.50
BF330CDR
24V red Vantage fire siren c/w deep base
£17.40
BF330CDR/LPCB 24V red Vantage fire siren c/w deep base (LPCB approved)
£18.85
BF330CDR/4
24V red Vantage fire siren c/w deep base, 4 tones
£16.50
BF330SR
24V red polarised fire siren, internal (shallow)
£17.91
BF330DR
24V red polarised fire siren, weatherproof (deep)
£19.46
BEDHEAD SOUNDERS
NEW
NEW
BF331CR
24V red Vara conventional bedhead sounder
BF331CR/L
24V red Vara conventional bedhead sounder, with LED
£13.50
£37.50
BF331CW
24V white Vara conventional bedhead sounder
£13.50
BF331CW/L
24V white Vara conventional bedhead sounder, with LED
£37.50
BF331R
24V red polarised bedhead sounder
£13.61
BF331W
24V white polarised bedhead sounder
£13.61
BASE SOUNDERS
BF332C
24V white Vector conventional base sounder
BF332C/LIDW
White lid for Vector sounder
BF332
24V Squashni base ceiling sounder
£17.40
£2.14
£17.91
STROBES / BEACONS
BF340/1
24V polarised red 1W fire strobe
£21.75
BF340/3
24V polarised red 3W fire strobe
£21.75
BF340CLS
24V red LED beacon, shallow base
£19.57
BF340CLD
24V red LED beacon, deep base
£19.85
SOUNDER BEACON COMBINATIONS
BF333CSR
24V red Vantage-Combi fire siren/beacon c/w shallow base
£41.34
BF333CDR
24V red Vantage-Combi fire siren/beacon c/w deep base
£41.34
BF333F
24V Flashni sounder/beacon combined
£41.33
VIBRATING PADS
BF363
24V vibrating pad c/w locking jack plug (requires 1 x BF364)
£45.00
Designed for use under pillows, etc, to warn the hard of hearing of a fire condition
BF364
£32.00
Single gang locking jack socket for use with BF363
Can be connected to a standard 24V (max. 27V) fire alarm sounder circuit
24V BATTERY PACKS
page 8
BC283/2
24V 1.2 AHr VRLA battery pack (2 x 12V including link wire)
BC284/2
24V 2.1 AHr VRLA battery pack (2 x 12V including link wire)
£25.72
£28.82
BC285/2
24V 2.8 AHr VRLA battery pack (2 x 12V including link wire)
£29.45
BC287/2
24V 3.3 AHr VRLA battery pack (2 x 12V including link wire)
£39.54
BC286/2
24V 7.0 AHr VRLA battery pack (2 x 12V including link wire)
£40.30
BC288/4
24V 10.0 AHr VRLA battery pack (4 x 6V including link wires)
£59.61
BC289/2
24V 24.0 AHr VRLA battery pack (2 x 12V including link wire)
£111.40
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
TWO-WIRE FIRE ALARM EQUIPMENT
CFP/ALARMSENSE TWO-WIRE FIRE PANELS & ANCILLARIES
CFP ALARMSENSE 2-8 ZONE TWO-WIRE FIRE PANELS (TO EN54-2/4)
Include all standard CFP features (see page 4).
Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.
CFP702-2
CFP AlarmSense 2 zone two-wire panel, code entry only
includes 2 AlarmSense zone circuits, does not extend
£153.98
CFP704-2
CFP AlarmSense 4 zone two-wire panel, code entry only
includes 4 AlarmSense zone circuits, does not extend
£194.16
CFP708-2
CFP AlarmSense 8 zone two-wire panel, code entry only
includes 8 AlarmSense zone circuits, does not extend
£294.58
CFP760
CFP 8 zone repeater panel, up to 8 per system, code entry
£172.24
CFP761
CFP network driver card, one required per repeater system, fit at main
£60.34
CFP762
CFP relay output card, provides reset, fault, aux & remote relay outputs
£40.99
CFP763
CFP relay output per zone card, as CFP762 plus 8 output per zone relays
£63.19
ALARMSENSE DETECTORS, CALL POINTS & SOUNDERS for use with CFP two-wire fire panels only
BF302ASH
AlarmSense standard heat detector
£20.86
BF302ASHH
AlarmSense high temperature heat detector
£22.41
BF316ASH
AlarmSense optical smoke detector
£32.51
BF316ASHI
AlarmSense integrating optical smoke detector
£31.38
BF308AS
AlarmSense base
£15.68
BF330ASBS
AlarmSense base sounder (requires cap for stand-alone use)
£35.81
BF330XRLIDR Red cap for base sounder
£3.35
BF330XRLIDW
White cap for base sounder
£3.35
BF370ASS
AlarmSense surface mounting manual call point
BF316ASHC
AlarmSense optical smoke detector / base / sounder combination
£65.51
BF316ASHIC
AlarmSense integrating optical smoke detector / base / sounder combination
£66.20
£62.41
£32.68
BF302ASHC
AlarmSense standard heat detector / base / sounder combination
BF302ASHHC
AlarmSense high temperature heat detector / base / sounder combination
£63.79
BF318AS
AlarmSense remote indicator
£10.61
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 9
solidstatesecurity.co.uk
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
XFP 1-2 LOOP EN54 NETWORKABLE FIRE PANELS
XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
XFP501E/X
XFP Networkable single loop 16 zone panel (XP95/Discovery version)
Code entry, c/w 1.4A psu, plastic lid, plastic back box
XFP501EK/X XFP Networkable single loop 16 zone panel (XP95/Discovery version)
Keyswitch entry, c/w 1.4A psu, plastic lid, plastic back box
XFP501/X
XFP Networkable one loop 32 zone panel (XP95/Discovery version)
Code entry, c/w 3A psu, metal lid, metal back box
XFP501K/X XFP Networkable one loop 32 zone panel (XP95/Discovery version)
Keyswitch entry, c/w 3A psu, metal lid, metal back box
XFP502/X
XFP Networkable two loop 32 zone panel (XP95/Discovery version)
Code entry, c/w 3A psu, metal lid, metal back box
XFP502K/X XFP Networkable two loop 32 zone panel (XP95/Discovery version)
Keyswitch entry, c/w 3A psu, metal lid, metal back box
£360.00
£370.00
£526.50
£536.50
£661.50
£671.50
• Designed to comply with EN54 parts 2 & 4
• Compatible with Hochiki’s ESP & Apollo’s
XP95, Discovery & Xplorer protocols
• Can be configured to sit on a network of
multiple interconnected XFP fire panels.
(A network can comprise up to eight
XFP main panels (any variant) plus an
additional four repeaters per main panel)
• Two independently programmable
conventional sounder circuits
• Two programmable inputs, a fault output
relay and three programmable relay
outputs with volt free changeover contacts
• Zone dependency (coincidence), day/night
(building occupied/unoccupied) and
investigation delay period functions
• Individual device sensitivity settings
XFP 1-2 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
XFP501E/H
XFP Networkable single loop 16 zone panel (Hochiki ESP)
Code entry, c/w 1.4A psu, plastic lid, plastic back box
XFP501EK/H XFP Networkable single loop 16 zone panel (Hochiki ESP)
Keyswitch entry, c/w 1.4A psu, plastic lid, plastic back box
XFP501/H
XFP Networkable one loop 32 zone panel (Hochiki ESP)
Code entry, c/w 3A psu, metal lid, metal back box
XFP501K/H XFP Networkable one loop 32 zone panel (Hochiki ESP)
Keyswitch entry, c/w 3A psu, metal lid, metal back box
XFP502/H
XFP Networkable two loop 32 zone panel (Hochiki ESP)
Code entry, c/w 3A psu, metal lid, metal back box
XFP502K/H XFP Networkable two loop 32 zone panel (Hochiki ESP)
Keyswitch entry, c/w 3A psu, metal lid, metal back box
• Code or keyswitch entry to Access Levels
2 & 3 (dependent on model purchased)
XFP510K
• 40 characters of custom text per device
CFP761
• Comprehensive test, maintenance &
commissioning functions (including
auto-learn loops, monitor a point, test
outputs, OMT and loop continuity test)
• An intuitive Windows based uploaddownload PC program
£370.00
£526.50
£536.50
£661.50
£671.50
XFP ANCILLARIES (REPEATERS, NETWORK CARDS, PRINTERS AND SOFTWARE)
XFP510
• Phased evacuation facility
• 500 event monitoring
£360.00
AFP711
AFP385
AFP709
XFP507
SAF7070000
XFP Networkable repeater panel, 32 zones (all protocols)
Code entry, c/w psu, metal lid, metal back box
XFP Networkable repeater panel, 32 zones (all protocols)
Keyswitch entry, c/w psu, metal lid, metal back box
XFP network communications card for XFP 16 zone panels
(all protocols, one required per master for network/repeater function)
XFP network communications card for XFP 32 zone panels
(all protocols, one required per master for network/repeater function)
Flush mounting bezel (for XFP 32 zone masters & repeaters)
XFP printer kit, incl. lead & socket (not compatible with XFP 16 zone panels)
XFP Upload/download software (Windows 2000/XP) c/w SAF7070000 lead
2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female)
£360.00
£370.00
£60.34
£91.00
£27.61
£342.15
£80.00
£15.50
AFP 1-2 LOOP EN54 FIRE PANELS
AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
AFP701E/W
AFP701/W
AFP701/WM
AFP702/W
AFP
AFP
AFP
AFP
economy 1 loop panel, does not extend (System Sensor) plastic lid
1 loop panel, extends to 2 loop, (System Sensor) plastic lid
1 loop panel, extends to 2 loop, (System Sensor) metal lid
loop driver card (System Sensor)
£378.00
£526.50
£616.50
£135.00
AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
•
•
•
•
•
•
Designed to comply with EN54 parts 2 & 4
System Sensor or Nittan protocols
16 zonal alarm LEDs, expandable to 32
Four conventional sounder circuits
Alert, reset, ‘class change’ & silence inputs
Auxiliary fire, fault, remote, pre-alarm,
reset and 24V outputs
• Programmable delay / phased evac. facilities
• Intuitive PC programming software
Items marked * not compatible with AFP Economy panels
page 10
AFP701E/N
AFP701/N
AFP701/NM
AFP702/N
AFP
AFP
AFP
AFP
economy 1 loop panel, does not extend (Nittan) plastic lid
1 loop panel, extends to 2 loop, (Nittan) plastic lid
1 loop panel, extends to 2 loop, (Nittan) metal lid
loop driver card (Nittan)
£378.00
£526.50
£616.50
£135.00
AFP ANCILLARIES (REPEATERS, NETWORK CARDS, PRINTERS AND SOFTWARE)
AFP703
AFP710*
AFP711*
AFP709
AFP385
AFP707
SAF7070000
AFP 16 zone extension LED kit (all protocols)
AFP 16 zone fully functional repeater (all protocols), plastic lid
AFP network driver card, 1 per repeater system, fit at master (all protocols)
AFP printer kit including printer, lead and socket
AFP flush mounting bezel, fits all AFP variants
AFP Upload/download software (Windows 2000/XP) c/w SAF7070000 lead
2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female)
£180.00
£490.00
£91.00
£342.15
£27.61
£80.00
£15.50
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS
NEW
NEW
NEW
NEW
NEW
NEW
BF302XPH
BF303XPH
BF314XPH
BF316XPH
BF317XPH
BF308XP
BF308XPC
BF308XPR
BF369XBD
BF369XBD/R
BF369XFD
BF308XP/20
AFP735
BF308XPI
AFP735DD
AFP730I
AFP730D
AFP730MS
AFP732I
AFP732D
AFP733I
AFP733D
AFP734I
AFP736I
AFP736D
AFP737I
AFP737D
AFP738
BF370XP
BF370XP/W
BF370XPG/5
BF330XAB
BF330XR
BF330XR/I
BF330XRLIDR
BF330XRLIDW
BF330XASR
BF330XASW
BF340X
55000-400 standard temperature (55ºC) heat detector, no base
£42.00
55000-401 high temperature (90ºC) heat detector, no base
£42.00
55000-885 multisensor, no base
£58.33
55000-600 optical smoke detector, no base
£43.00
55000-500 ionisation smoke detector, no base
£43.00
45681-210 standard base c/w XPERT card
£5.00
38531-771 blank XPERT Card
£0.53
45681-242 standard base with relay c/w XPERT card
£27.00
55000-265 loop powered beam detector
£839.00
29600-201 reflector for loop powered beam detector, 100 x 100mm
£85.70
55000-295 loop powered flame detector in flameproof housing
£2187.50
45681-321 isolating base (isolates up to 20 devices)
£32.00
55000-720 isolator, needs BF308XPI base
£35.00
45681-211 isolator base (for use with AFP735)
£6.50
55000-802 dual isolator, DIN style
£77.14
55000-847 input output unit, with isolator (includes back box)
£91.67
55000-803 input output unit, DIN style
£87.14
55000-875 input output unit, mains switching
£127.78
55000-852 sounder control unit with isolator (includes back box)
£111.42
55000-826 sounder control unit, DIN style
£114.29
55000-849 output unit with isolator (includes back box)
£84.72
55000-804 output unit, DIN style
£78.57
55000-845 zone monitor with isolator (includes back box)
£90.27
55000-843 switch monitor with isolator (includes back box)
£79.17
55000-822 switch monitor, DIN style
£80.56
55000-841 switch monitor plus with isolator (includes back box)
£90.69
55000-821 switch monitor plus, DIN style
£87.50
55000-832 mini switch monitor with interrupt (no back box required)
£50.51
55000-905 manual addressable call point
£43.75
55000-950 waterproof IP67 manual addressable call point
£156.70
39117-217 spare glass for manual addressable call point, pack of 5
£3.58
45681-276 ancillary base sounder
£37.14
45681-265 loop powered base sounder for use with BF308XP or BF308XPI
£58.89
45681-266 loop powered base sounder for use with BF308XP/20 isolating bases
£61.11
29600-257 Red cap for use with stand-alone BF330XR or BF330XR/I
£3.35
29600-256 White cap for use with stand-alone BF330XR or BF330XR/I
£3.35
£74.28
55000-278 Red stand alone loop powered sounder 100/92dB
55000-279 White stand alone loop powered sounder 100/92dB
£74.28
55000-877 Loop powered beacon
£44.11
APOLLO DISCOVERY ANALOGUE ADDRESSABLE PERIPHERALS
NEW
NEW
NEW
NEW
NEW
NEW
NEW
In addition to the Discovery protocol specific items below, all XP95 protocol bases, isolators,
interfaces, sounders and beacons are compatible with the Discovery range.
£52.00
58000-400 heat detector, no base
BF302DH
BF314DH
58000-700 multisensor, no base
£71.50
BF316DH
58000-600 optical smoke detector, no base
£53.00
£53.00
58000-500 ionisation smoke detector, no base
BF317DH
£71.50
58000-300 carbon monoxide fire detector, no base
BF313DH
BF370DP/S
58000-910 surface mounting manual call point c/w back box
£53.00
58000-920 flush mounting manual call point c/w terminal tray
£63.00
BF370DP/F
APOLLO XPLORER ANALOGUE ADDRESSABLE PERIPHERALS
BF302XHB
BF302XHBL
BF303XHB
BF303XHBL
BF316XHB
BF316XHBL
AFP733X
AFP735X
AFP736X
BF370X
59000-405
59000-406
59000-415
59000-416
59000-605
59000-606
59000-810
59000-700
59000-820
59000-910
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
standard heat detector c/w base
standard heat detector c/w LED driver base
high temperature heat detector c/w base
high temperature heat detector c/w LED driver base
optical detector c/w standard base
optical detector c/w LED driver base
output unit (includes back box)
isolator unit (includes back box)
switch monitor unit (includes back box)
manual call point c/w back box
£ 35.97
£ 41.11
£ 35.97
£ 41.11
£ 40.69
£ 42.36
£ 32.53
£ 15.26
£ 33.78
£ 39.73
page 11
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
C-TEC MANUFACTURED ANALOGUE ADDRESSABLE LOOP POWERED SOUNDERS & BEACONS
DESIGNED FOR USE WITH APOLLO XP95, DISCOVERY & XPLORER FIRE PANELS
BF330CASR
BF330CASW
BF330CASR2
BF330CADR
BF330CADW
BF330CADR2
BF340CASR
BF340CADR
BF333CASR
BF333CASW
BF333CADR
BF333CADW
BF330CR
BF330CRLIDW
BF330CRLIDR
24V red Vantage loop powered sounder c/w shallow base
24V white Vantage loop powered sounder c/w shallow base
24V red Vantage loop powered sounder (slow whoop version) c/w shallow base
24V red Vantage loop powered sounder c/w deep base
24V white Vantage loop powered sounder c/w deep base
24V red Vantage loop powered sounder (slow whoop version) c/w deep base
24V red Vantage loop powered beacon c/w shallow base
24V red Vantage loop powered beacon c/w deep base
24V red Vantage-Combi loop powered sounder/beacon c/w shallow base
24V white Vantage-Combi loop powered sounder/beacon c/w shallow base
24V red Vantage-Combi loop powered sounder/beacon c/w deep base
24V white Vantage-Combi loop powered sounder/beacon c/w deep base
24V white Vector loop powered base sounder
Optional white lid for BF330CR (required for stand alone use)
Optional red lid for BF330CR (required for stand alone use)
£48.50
£48.50
£49.00
£49.50
£49.50
£50.00
£42.94
£43.58
£71.30
£71.30
£72.30
£72.30
£36.55
£4.13
£4.13
HOCHIKI ESP ANALOGUE ADDRESSABLE PERIPHERALS
BF302HEH
Hochiki ESP heat sensor, no base
£ 47.00
BF314HEH
Hochiki ESP multi sensor, no base
£ 70.00
BF316HEH
Hochiki ESP photo-electric smoke sensor, no base
£ 43.70
BF317HEH
Hochiki ESP ionisation smoke sensor, no base
£ 52.00
BF308HE
Hochiki ESP sensor base
BF308HEI
Hochiki ESP short circuit isolator base, requires AFP755C for stand alone use
£ 5.00
AFP755C
Hochiki ESP isolator cover for wall mounting BF308HEI
AFP755D
Hochiki ESP DIN rail mounting short circuit isolator
£ 2.15
AFP756
Hochiki ESP Dual switch monitor, loop powered, unboxed
£72.15
AFP756D
Hochiki ESP DIN rail mounting dual switch monitor
£84.15
AFP754
Hochiki ESP dual zone monitor, requires 24VDC supply, unboxed
£ 43.55
£136.42
AFP754M
Hochiki ESP mini zone monitor, loop powered, unboxed
£79.20
AFP754DM
Hochiki ESP DIN rail mounting mini zone monitor
£89.20
AFP752
Hochiki ESP dual sounder controller, requires 24VDC supply, unboxed
£128.57
AFP753
Hochiki ESP dual relay controller, loop powered, unboxed
£100.20
AFP753/240
Hochiki ESP 240V relay controller, loop powered, unboxed
£84.25
AFP753D
Hochiki ESP DIN Rail mounting Dual relay controller
AFP750LB
Hochiki ESP I/O unit large box for AFP754, AFP752
£17.85
AFP750SB
Hochiki ESP I/O unit small box for AFP754M, AFP753, AFP753/240, AFP756
£13.57
£101.40
BF370H
Hochiki ESP addressable call point, red (no back box)
£ 47.15
BF370HD
Hochiki ESP addressable call point, red, double pole (no back box)
£ 99.71
£ 71.40
BF370HY
Hochiki ESP addressable call point, yellow, (no back box)
BF370HW
Hochiki ESP addressable call point, red, weatherproof
£ 157.76
BF370HB2
Hochiki ESP red 2 terminal back box for ESP call point
£ 3.57
BF370HB3
Hochiki ESP red 3 terminal back box for ESP call point
BF370HBY
Hochiki ESP yellow 3 terminal back box for BF370HY
BF370HSG
Hochiki ESP spare call point glass, Hochiki branded
BF330HE
Hochiki ESP loop powered base sounder (with integral sounder base)
BF330HES
Hochiki ESP loop powered 100dB wall mounting sounder
£ 1.50
BF330HES/PL Hochiki ESP sounder programming lead for BF330HES and BF330HES/66
(one required per installation)
AFP755C
Hochiki ESP cover for wall mounting sounder
BF340HE
Hochiki ESP loop powered beacon
AFP757
O/CALG/SLR outer cover removal tool
AFP758
TCH-B100 handheld address programmer
£ 4.28
£ 16.85
BF330HES/66 Hochiki ESP IP66 loop powered 100dB wall mounting sounder
page 12
£ 27.14
£ 46.25
£ 57.37
£ 130.00
FREE
£ 2.15
£ 46.05
£ 97.75
£ 121.87
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
NITTAN ANALOGUE ADDRESSABLE PERIPHERALS
BF302NPH
ST-H-AS heat detector, no base
£39.90
BF316NPH
ST-P-AS optical smoke detector, no base
£43.00
BF317NPH
ST-I-AS ionisation smoke detector, no base
£43.00
BF308NP
STB-4 addressable base
AFP741
SCI-4 short circuit isolator (boxed)
£4.75
£44.00
BF308NP/20 SCI-3 short circuit isolator base, will accept heat, optical & ion detectors
£32.00
BF370NP
£43.00
ST-NCP-AS manual call point, back box not included
BF370NPBB
Back box for ST-NCP-AS
BF371
Spare glass for ST-NCP-AS, one only
£4.47
AFP742
MCM-AS3 zone monitor module, c/w back box
£88.00
AFP743
NAM-AS2 input module, c/w back box
£53.20
AFP744
OCM-AS3 output module, c/w back box
£74.57
AFP745
SCM-AS3 sounder output module, c/w back box
£94.00
BF330NC
ST-WMS-AS wall mounted loop sounder, white c/w cap
£59.55
BF330NB
ST-BMS-AS base mounted loop sounder, white c/w STB-4 base
£60.60
BF330NBH
ST-VMS-AS bedhead loop sounder, fits standard single gang back boxes
£60.60
£0.54
SYSTEM SENSOR ANALOGUE ADDRESSABLE PERIPHERALS
BF302WPH
5251HTEM 78o fixed temperature heat detector, no base
BF303WPH
5251REM rate of rise heat detector, no base
£44.00
BF316WPH
2251EM optical smoke detector, no base
£42.50
BF317WPH
1251E ionisation smoke detector, no base
£43.00
BF308WP
B501 standard base
BF308WPR
B524RTE mounting base with relay
BF309W
M02-04-00 test magnet
BF316WFH
FTX-P1 ‘Filtrex’ optical smoke detector, no base
BF316WFF
RF-FTX spare filters for ‘Filtrex’ optical smoke detector, pack of 6
£80.00
BF308WF
B524FT-XE base for ‘Filtrex’ optical smoke detector
£45.00
£5.00
£35.00
£3.00
£315.00
BF308WPI
B5241EFT isolating base (isolates up to 25 detectors)
£18.50
AFP726
M200XE isolator module, back box not included
£32.00
AFP720
M210E monitoring module, back box not included
£51.50
AFP721
M503ME micro monitor unit
£38.00
AFP722
M201E control module, back box not included
£66.00
AFP724
M512ME conventional zone module, back box not included
£90.00
AFP725
M200E-SMB enclosure, surface mount
AFP727
M501ME mini monitor module
£42.00
BF370WP
M500KAC manual call point
£43.00
£6.20
BF370WPBB
SR3T manual call point, back box
BF370WPW
M500KACW weatherproof call point, back box included
£4.50
BF370WPG/10
E-G/10 glass for BF370WP, pack of 10
BF370WPTT
ETT-P terminal tray for flush call point
BF330WR
EMA24ALR loop powered sounder, red, base not included
£55.00
BF330WW
EMA24ALW loop powered sounder, white, base not included
£55.00
£177.98
£7.97
£5.25
BF330WBASED ESBR deep base for loop powered sounder, red
£2.51
BF330WBASEW DBS24ALW low profile loop powered sounder, white
£58.00
BF330WBASEWL DBS24ALWLW low profile loop powered sounder, lid included
£58.50
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
£44.00
01257 462038
[email protected]
page 13
solidstatesecurity.co.uk
VOICE ALARM SYSTEMS
AVAC VOICE ALARM SYSTEM
AVAC MODULES, AMPLIFIERS & ANCILLARIES
VA403
Master AVAC dual 60W amplifier, charger & PSU
£1,100.75
includes fire alarm interface, fire microphone, paging and BGM connections
VA403H
Master AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £1,275.00
includes fire alarm interface, fire microphone, paging and BGM connections
VA402
Slave AVAC dual 60W amplifier, charger & PSU
£795.00
includes local paging and BGM connections
VA402H
Slave AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp.
£930.00
includes local paging and BGM connections
A low-cost, high quality modular voice
alarm system purposely designed to
simplify the provision of a fully BS5839-8
compliant voice alarm system. In one
compact wall-mounting enclosure, the
AVAC comprises:-
VA405
Fireman's microphone (max. 1 per system)
£450.00
VA406
Line level paging microphone (max. 1 per system)
£250.00
LOUDSPEAKERS (TO BS 5839-8)
VA421A
6” 6W ceiling speaker
c/w steel fire dome & ceramic terminal block
£32.07
VA422A
8W wall mounting metal cabinet speaker
c/w ceramic terminal block
£47.89
VA423
8W wall mounting bi-directional metal speaker
c/w ceramic terminal block
£61.90
• A high-quality digital message store
VA428
30W pendant loudspeaker
c/w 8m cable and internal stress wire (requires VA490 or VA492)
£86.50
containing programmable Evacuate,
Alert and Test messages
VA430
6W round wall/ceiling speaker in metal cabinet
c/w ceramic terminal block
£37.05
VA490
Ceramic terminal block and thermal fuse assembly
(use to convert wire-end sealers to BS5839-8, needs adaptable back box)
VA492
VA loudspeaker metal termination box
c/w 2 x ceramic terminal blocks and thermal fuses
• Conventional and analogue (Apollo
XP95/Discovery) fire alarm interfaces
• A prioritised mixer
• Two x 60-Watt max. peak Class D
amplifiers (plus an optional standby amp)
• An EN54-4 compliant switch mode
power supply and battery charger
• Three balanced line level inputs for the
(optional) connection of a fire mic,
paging/public address equipment and a
background music source
• Space for 2 x 7Ahr VRLA batteries
typically providing at least 24 hours
standby and 30 mins alarm running time
£3.45
£14.85
Speakers for special applications - column, horn, sound projection, spherical suspension, etc are available to order. Please contact our technical department for details.
AVAC TESTING EQUIPMENT
LOADMASTER
Loudspeaker line tester
PNGN
Pink noise generator
£137.85
£61.90
• A slave line level output allowing the
connection of up to 10 slave AVACs
TOTAL CAPABILITY VA/PA SYSTEMS
From a simple single zone alarm system in a shop unit to a school, theatre or hotel with multiple zones and many hundreds
of speakers, we have the equipment and expertise to provide a compliant and cost-effective VA/PA solution.
Our AVAC, Integrity, LinX and SigNET LS voice alarm systems are installed in buildings all over the world including theatres,
multi-screen cinemas, international airports, shopping centres, high rise buildings, offices, hotels, leisure centres, football
stadia, exhibition centres, railway stations and theme parks.
Should you require any further information, please contact our Specialist Support Division which specialises in project supply
chain management, sales training (system design and application), engineer training (installation and commissioning) and
product application guidance. Call 07775 953174 for details.
page 14
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
FIRE TELEPHONE SYSTEM
SIGTEL FIRE TELEPHONE SYSTEM
SIGTEL FIRE TELEPHONE SYSTEM
Red telephone handset with key (fire telephone text on window)
£233.00
Red telephone handset with handle & T bar (fire telephone text on window)
£233.00
NEW
THS1-ED/MK4 Red telephone handset with key (disabled refuge text on window)
£236.26
NEW
THS1-ETD/MK4 Red telephone handset with handle & T bar (disabled refuge text on window)
£236.26
• A hard-wired emergency telephone
system designed to help firefighters and
emergency personnel communicate fast
and effectively in large and complex sites
• Required in all phased evacuation sites
and sports stadia
• Meets and exceeds the requirements
of BS5839-9 (Emergency Voice
Communication Systems)
• Modular control system can be easily
distributed to save wiring costs
• Small footprint dial unit and compact
wall-mounting exchanges save valuable
space in crowded control rooms
THS1-E/MK4
THS1-ET/MK4
NEW
T-BEZ
Red flush bezel for THS1-E/ET/ED/ETD telephone handsets
THS/MK4
Red desk mount telephone handset
£15.71
CCU-16
16 line master control unit c/w fault display, needs LC2 line cards & batteries
£1,047.20
SCU-16
16 line slave control unit c/w fault display, needs LC2 line cards & batteries
£654.50
AFP385
Grey flush bezel for CCU-16 or SCU-16
LC2
Line Card, 2 Way (2 lines per card - up to 8 cards per CCU-16/SCU-16)
£60.74
BC286/2
24V 7AHr VRLA battery pack
£40.30
SVMM
Message card for CCU (optional)
SVMM/C
Custom message card for CCU (optional)
ECU-32
Desk control unit c/w handset & display, 32 line
£1,570.80
ECU-64
Desk control unit c/w handset & display, 64 line
£2,356.20
ECU-128
Desk control unit c/w handset & display, 128 line
£3,141.60
ECUWMB
Wall mount bracket for ECU-32, ECU-64, ECU-128
FITT
Fire telephone tester
CatCON
Adaptor box (for conversion of FP200 to CAT5)
£24.41
XSB
Xenon strobe, blue, 12V
£40.00
XSA
Xenon strobe, amber 12V
£40.00
SDM
Xenon strobe driver module, 12V
£20.52
£128.28
£27.61
£261.80
£658.90
£15.95
£132.00
• Fully monitored hardware & software
• Optional FITT line tester allows cable
faults to be checked and cleared
prior to equipment connection
• Suitable for use in many other
emergency voice communication
applications, including disabled refuge
systems & stadium marshalling systems
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 15
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
DISABLED PERSONS TOILET ALARMS
800 SERIES DISABLED PERSONS TOILET ALARMS / SINGLE ZONE CALL SYSTEMS
NC951
Standard disabled persons toilet alarm kit
£102.50
Includes NC942 call controller, NC807C ceiling pull, NC806CS overdoor light c/w
sounder, NC809DBB reset point c/w sounder & NC949 Disabled WC sticker
NC951B
• NC951 Standard and NC951B Elite kits
include everything required for a
BS8300 clause compliant emergency
assistance alarm, except cables & fixings
Elite disabled persons toilet alarm kit c/w battery backup facility
£110.00
Includes NC942B call controller c/w onboard battery backup facility, NC807C
ceiling pull, NC806CS overdoor light c/w sounder & NC809DBB reset point
c/w sounder & NC949 Disabled WC sticker
NC951/SS
Stainless steel single zone call system kit
£154.00
Includes NC941/SS s/steel call controller, NC807C plastic ceiling pull, NC806CS/SS
s/steel overdoor light c/w sounder, NC809DB/SS s/steelreset point & NC949
Disabled WC sticker
• New-look NC942 call controller now
features a volt-free relay output, rotary
volume control and braille text label
• NC951/SS Stainless steel single zone call
systems also available
All of the parts contained in the kits listed above can also be purchased separately if desired.
In addition, systems can be expanded to include multi-zone indicator panels and/or additional
calling devices, sounders, overdoor lights, etc. Refer to our full 800 Series Call System listing
below for further details.
800 SERIES CALL SYSTEM
800 SERIES SINGLE ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency calls
• Tried, trusted and respected
NC942
Single zone call controller c/w 12V 140mA PSU, reset button & relay
NC942B
Single zone call controller c/w 12V 140mA PSU, reset button, relay &
on-board rechargeable battery backup supply
£70.00
£78.00
NC941
Single zone call controller c/w 12V 250mA PSU & reset button
£70.00
NC941/SS
Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button
£126.00
NC941B
0.3AHr battery backup kit, for use with NC941 & NC941/SS controllers
£48.50
• Ideal for use in all types of private,
commercial, residential and public sector
buildings
800 SERIES 4-12 ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency calls
• Hundreds of applications - suitable for
use in hotels, leisure centres, nursing
homes, shops, offices, GP surgeries, etc
NC944
Four zone call controller c/w mute/reset button, requires 12V PSU
NC944/SS
Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU
• 12V d.c. system - simple to install, easy to
NC930
12V 250mA PSU, powers up to 2 x four zone call controllers
NC930/SS
12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers
use and highly reliable - standard six core
security cable ideal for most installations
• Wide range of indicator panels covering
1 to 90 zones
£55.00
£151.33
£50.00
£124.40
NC941B
0.3AHr battery backup kit, for use with NC930 and NC930/SS 12V PSUs
£48.50
NC925B1
12V 1A white boxed PSU, powers up to 3 x four zone call controllers
£55.24
AC284
2.1AHr backup battery, for use with NC925B1 12V PSU
£9.57
• Extensive range of ancillaries including
ceiling pulls, wall-mounting call points,
monitoring points, water resistant alert
points, overdoor lights, infrared ceiling
receivers, remote sounders and relays
800 SERIES 10-60 ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency calls
£198.72
• Attractive compact design
NC812KE
10 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
• Most wall-mounting components fit 25mm
NC811KE
10 Zone Emergency repeater panel
£149.01
NC822KE
20 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£270.50
NC821KE
20 Zone Emergency repeater panel
£220.78
NC832KE
30 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£342.26
NC831KE
30 Zone Emergency repeater panel
£292.54
NC842KE
40 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£414.04
NC841KE
40 Zone Emergency repeater panel
£364.32
NC852KE
50 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£485.82
NC851KE
50 Zone Emergency repeater panel
£436.10
NC862KE
60 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£557.57
NC861KE
60 Zone Emergency repeater panel
£507.88
UK single or double gang back boxes.
Ceiling pulls and water resistant alert
points are surface mountable.
• Two levels of call - standard (constant tone)
and emergency (intermittent tone)
(dependent on items purchased)
• No limit to system size - components
can be mixed to meet the layout and
call communication requirements of
virtually any building
• Stainless steel versions of many
components now available
page 16
Larger Emergency master and repeater panels available to order, add per 10 zones
£71.76
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS
Capable of indicating standard calls ONLY
NC810K
10 Zone Standard master panel c/w 12V PSU & reset button
NC811K
10 Zone Standard repeater panel
NC820K
20 Zone Standard master panel c/w 12V PSU & reset button
NC821K
20 Zone Standard repeater panel
NC830K
30 Zone Standard master panel c/w 12V PSU & reset button
NC831K
30 Zone Standard repeater panel
NC840K
40 Zone Standard master panel c/w 12V PSU & reset button
NC841K
40 Zone Standard repeater panel
NC850K
50 Zone Standard master panel c/w 12V PSU & reset button
NC851K
50 Zone Standard repeater panel
NC860K
60 Zone Standard master panel c/w 12V PSU & reset button
NC861K
60 Zone Standard repeater panel
Larger Standard master and repeater panels available to order, add per 10 zones
£160.31
£135.46
£225.56
£200.71
£290.82
£265.95
£356.07
£331.21
£421.30
£396.46
£486.55
£461.70
£65.25
800 SERIES OVERDOOR LIGHTS AND SOUNDERS
Can be used to increase call indication levels
NC806C
NC806CS
NC806C/SS
NC806CS/SS
NC887D
NC888D
Overdoor light
Overdoor light & sounder
Overdoor light, s/steel
Overdoor light & sounder, s/steel
Switchable sounder
Remote sounder
£15.52
£24.39
£43.23
£49.30
£19.93
£8.86
800 SERIES STANDARD CALL POINTS
Generate standard calls only
NC807C
NC802DB
NC802DM
NC917L
NC802DEWM
NC802DEWS
NC802DESS
NC802DEM/SS
Ceiling pull unit, no on-board reset, no remote socket
Standard call point, button reset, with remote socket
Standard call point, magnetic reset, with remote socket
Standard call push with protruding button, no on-board reset, no remote socket
Master IP65 water resistant alert point, mag. reset, no remote socket
Slave IP65 water resistant alert point, up to 10 per master
IP69K sauna alert point (must be used as a slave to an NC802DEWM)
Stainless steel call point, magnetic reset, no remote socket
£15.52
£19.93
£19.93
£15.22
£83.11
£69.30
£141.00
£95.80
800 SERIES STANDARD MONITORING POINTS (door contacts included)
Generate standard calls only
NC894DKB
NC894DKM
Isolatable monitoring point, button reset, no remote socket
Isolatable monitoring point, magnetic reset, no remote socket
£28.52
£28.52
800 SERIES EMERGENCY CALL POINTS
Generate standard and/or emergency calls (as shown)
NC802DEB-1/2
Emergency call point, button reset, with remote socket
can generate standard and emergency calls
NC802DEM
Emergency call point, magnetic reset, with remote socket
can generate standard and emergency calls
NC802DEWM Master water resistant alert point, IP65, mag. reset, no remote socket
can generate standard or emergency calls (not both)
NC802DEWS Slave water resistant alert point, IP65, max. 10 per master
NC802DESS
IP69K sauna alert point (must be used as a slave to an NC802DEWM)
NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket
can generate standard or emergency calls (not both)
Emergency call / reset point, button reset, no remote socket
NC804DE
can generate emergency calls only
Emergency call / reset point, magnetic reset, no remote socket
NC809DEM
can generate emergency calls only
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£29.09
£29.09
£83.11
£69.30
£141.00
£95.80
£26.57
£26.57
page 17
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
800 SERIES INFRARED CALL POINTS & CEILING RECEIVERS
Generate standard and/or emergency calls when triggered by a compatible infrared transmitter
NC302RXC
Infrared master ceiling receiver, no on-board reset, no remote socket
£37.00
NC302RXCS Infrared slave ceiling receiver, up to 3 per master
£25.00
NC802DERB Infrared call point, button reset, with remote socket
£40.80
NC802DERM Infrared call point, magnetic reset, with remote socket
£40.80
NC302RT
Test infrared receiver
£50.00
800 SERIES RECHARGEABLE INFRARED TRANSMITTERS
For use with infrared call points & ceiling receivers
QT412RXA
Infrared transmitter, push/pull for emergency call
QT412RXCA Infrared transmitter, push for standard call/pull for emergency call
QT424/1
Single-way charging unit for QT412 range transmitters
QT424/10
Ten-way charging unit for QT412 range transmitters
£80.00
£80.00
£15.00
£185.00
800 SERIES RESET POINTS
Can be used to reset devices which do not have an onboard reset facility
NC809DB
Button reset point
NC809DBB
Button reset point c/w sounder and braille label
NC809DB/SS Button reset point, s/steel
NC809DM
Magnetic reset point
NC899IRR
Keyswitch reset point
£8.86
£12.50
£43.60
£8.86
£22.50
800 SERIES MAGNETIC RESET KEYS
For use with all magnetic call points, monitoring points and reset points
NC803M/10
10 x magnetic reset keys
NC803M/50
50 x magnetic reset keys
£28.50
£135.00
800 SERIES ANCILLARY CALLING DEVICES
Generate standard calls via a call point’s remote socket
NC805C/6
1.8m (6ft) tail call lead
NC805C/14
4.2m (14ft) tail call lead
NC805D
1.2-3.6m (4-12ft) tail call lead
NC805P
Hand/foot pneumatic pad, requires 1 x NC805AS
NC805AS
Remote air switch for NC805P
NC805MD
Portable movement detector
NC805DSP
Double remote jack socket, allows two ancillary calling devices to be connected
£10.14
£11.40
£15.52
£14.80
£35.36
£304.34
£7.90
MISCELLANEOUS 800 SERIES DEVICES
NC899KD
NC884DE
NC885
NC889
NC889ERM
Area isolator, can be used to isolate areas/zones
Emergency 5:1 input expander, can be used to provide area/zonal indication
Standard 5:1 input expander, can be used to provide area/zonal indication
Call latch module, can trigger a standard call from a n/o or n/c switch
Multi-purpose call latch module, can trigger a standard and/or an emergency
£29.09
£16.74
£10.22
£10.22
£16.12
call from a normally open switch (includes confidence LED & on-board magnetic reset)
NC883D
NC848/50
NC947
12V relay unit, can be used to switch sirens, strobes, etc.
50 x anti-tamper screws, can be used to secure s/steel devices in high risk environments
Anti-tamper Allen key, for use with anti-tamper screws
£31.04
£80.00
£6.70
800 SERIES TONE-ONLY PAGING EQUIPMENT
DP874B/4
DP875/4
Tone only UHF paging transmitter, supplied with one tone-only pager
Extra tone-only pager
£485.43
£195.00
PLASTIC BACK BOXES
NCP-8
NCP-9
NCP-10
NCP-11
White 35mm flush mount UK single gang back box
White 25mm surface mount UK single gang back box
White 35mm flush mount UK double gang back box
White 25mm surface mount UK double gang back box
£1.72
£1.40
£2.44
£2.52
page 18
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
800 SERIES STAINLESS STEEL DEVICES
800 SERIES STAINLESS STEEL DEVICES
NC941/SS
Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button
£126.00
NC944/SS
Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU
£151.33
NC930/SS
12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers
£124.40
NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket
• New stainless steel versions of some of
our most popular 800 Series devices
• High quality brushed stainless steel
finish - ideal for use in hospitals, clinics
and many other prestigious private or
public sector applications
• Optional anti-tamper screws available
for use in high-risk environments
£95.80
NC809DB/SS Stainless steel button reset point
£43.60
NC806C/SS
£43.23
Overdoor light, s/steel
NC806CS/SS Overdoor light & sounder, s/steel
£49.30
NC848/10
10 x anti-tamper screws
£16.00
NC848/50
50 x anti-tamper screws
£80.00
NC947
Anti-tamper Allen key, for use with anti-tamper screws
NC951/SS
Standard disabled persons toilet alarm kit (stainless steel version)
£6.70
£154.00
Includes NC941/SS call controller, NC807C plastic ceiling pull, NC806CS/SS overdoor
light & sounder, NC809DB/SS button reset point & NC949 disabled WC sticker
NC950/SS
Economy single zone call system (stainless steel version)
£130.00
Includes NC941/SS call controller and NC807C plastic ceiling pull
• Compatible with our full range of 800
Series Call System devices
C-CALL WAITING ROOM CALL SYSTEM
C-CALL SELF-RESETTING DISPLAY PANELS
• Attractive slimline indicator panels with
NC905KT
2 zone self-resetting display panel incl. labels (state names when ordering)
£93.21
NC906KT
4 zone self-resetting display panel incl. labels (state names when ordering)
£186.42
NC907KT
6 zone self-resetting display panel incl. labels (state names when ordering)
£279.63
NC925C
Double insulated PSU, one required per system
NC903
2 x spare display panel labels (state names when ordering)
£24.85
£3.68
C-CALL RECEPTION PANELS
personalised self-adhesive labels
NC911K
10 zone reception panel
£135.46
• Available in self-resetting or manual
NC921K
20 zone reception panel
£200.71
reception reset formats
• Durable desk and wall mounting call
pushes with call confirmation LEDs
• Simple to install - four core security
cable is ideal for most installations
C-CALL MANUAL RECEPTION RESET PANELS
NC912K-5
5 zone resettable reception panel c/w psu
£160.31
NC912K-10
10 zone resettable reception panel c/w psu
£225.56
NC912K-15
15 zone resettable reception panel c/w psu
£290.82
• Easily expandable with no limit to
system size
C-CALL CALL PUSHES, OVERDOOR LIGHTS & REMOTE SOUNDERS
• Optional overdoor lights and remote
sounders available for increased call
indication levels
• Low voltage, low current systems with
optional back-up battery
• Logical operation
NC917L
C-Call call push (latching or non-latching)
£15.22
NC915L
C-Call desk push/4ft lead (latching or non-latching), requires NC920
£19.54
NC920
C-Call wall socket, for use with NC915L desk push
NC806C
Overdoor light
NC888D
Remote sounder
£4.97
£15.52
£8.86
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 19
solidstatesecurity.co.uk
ADDRESSABLE CALL SYSTEMS
QUANTEC ADDRESSABLE CALL SYSTEM
QUANTEC NETWORK CONTROLLERS, DISPLAYS, INSTALLATION AIDS
NEW
QT601-2
AFP385
QT707
SAF7070000
QT707S
Quantec controller
Flush bezel for Quantec controller
Quantec upload/download software c/w SAF7070000 lead (Windows 2000/XP)
2m Programming lead ONLY (4 way molex to 9-way RS232 ‘D’ female)
Quantec Surveyor Data Management Software c/w wall socket & lead
£325.00
£27.61
£80.00
£15.50
£620.00
Allows detailed data analysis reports to be sent direct to a PC’s desktop on criteria
such as longest calls, busiest shifts, average call response times, etc.
QT608C
QT608CD
QT603
£149.00
£149.00
£20.45
QUANTEC OVERDOOR LIGHTS & SOUNDERS
• Multiple call levels - standard call,
help required (assist), emergency
and optional infrared staff attack
• Up to 256 network devices per
system
Quantec corridor display, with controls
Quantec corridor display, no controls
Quantec network splitter
NEW
QT606
QT606A
QT688
QT688/2
overdoor light
addressable overdoor light c/w sounder
addressable sounder
high-output 85dB addressable sounder
£18.45
£42.00
£41.00
£46.15
(with optional HTM2015 tone capability - requires QT423 configurator)
• New-look Quantec Controller is now
programmable via a sophisticated
upload/download PC program or by
its front panel controls
Quantec
Quantec
Quantec
Quantec
QUANTEC QT602 RANGE CALL POINTS (WITH REMOTE SOCKETS)
QT602
QT602S
QT602R
QT602RS
QT602M
QT602SM
QT602RM
QT602RSM
QT602D
• Up to 45 custom place names per
system
• Flexible call routing - allows the
system to be tailored to suit a
building’s exact operational needs
• Full monitoring of all network
devices
Quantec call point,
Quantec call point,
Quantec call point,
Quantec call point,
Quantec call point,
Quantec call point,
Quantec call point,
Quantec call point,
Slave call point
button reset
button reset with sounder
button reset with infrared receiver
button reset with sounder & infrared receiver
magnetic reset
magnetic reset with sounder
magnetic reset with infrared receiver
magnetic reset with sounder & infrared receiver
£36.50
£41.50
£59.50
£64.50
£36.50
£41.50
£59.50
£64.50
£22.00
• Free built-in 500 event datalogger
QUANTEC UNIVERSAL DEVICES
• Wide range of system components
including call points, ceiling pulls,
monitoring points, infrared ceiling
receivers, radio receivers, dual-action
infrared/radio transmitters, displays,
overdoor lights and pagers
QT611
QT612
• Now with HTM2015 capability
(requires specially designed thirdparty switch assemblies and
indicators used in conjunction with
our new range of Quantec universal
devices - contact our technical
department for advice).
£195.00
Quantec relay output device (unplated)
£205.00
A zone-specific relay output to trigger third-party strobes, sounders, auto-diallers, etc.
QT613
• Staff presence, call accept, manual
and automatic call divert facilities
Quantec multi-purpose programmable device (unplated)
Allows third-party switch assemblies & indicators to be interfaced to Quantec and to
be engineer programmed to operate in a multitude of ways using a QT423 configurator
Quantec zonal indicator driver device (unplated)
£195.00
Can be used to drive third-party LED indicating devices
NEW
QT614
Quantec bedhead light dimmer interface (unplated)
QT423
Quantec configurator (required to program QT611/612/613/614 devices)
£30.00
£115.40
QUANTEC QT609 RANGE CALL POINTS (NO REMOTE SOCKETS)
QT609
QT609S
QT609R
QT609RS
QT609M
QT609SM
QT609RM
QT609RSM
Quantec
Quantec
Quantec
Quantec
Quantec
Quantec
Quantec
Quantec
call
call
call
call
call
call
call
call
point,
point,
point,
point,
point,
point,
point,
point,
button reset
button reset with sounder
button reset with infrared receiver
button reset with sounder & infrared receiver
magnetic reset
magnetic reset with sounder
magnetic reset with infrared receiver
magnetic reset with sounder & infrared receiver
£36.00
£41.00
£59.00
£64.00
£36.00
£41.00
£59.00
£64.00
QUANTEC CEILING PULLS
QT607
Quantec ceiling pull unit
£16.00
QUANTEC MONITORING POINTS
QT604
Quantec monitoring point, button reset
£36.90
QT604M
Quantec monitoring point, magnetic reset
£36.90
QUANTEC MAGNETIC RESET KEYS
page 20
NC803M/10
Pack of 10 magnetic reset keys
£28.50
NC803M/50
Pack of 50 magnetic reset keys
£135.00
ADDRESSABLE CALL SYSTEMS
QUANTEC INFRARED CEILING RECEIVERS
QT302RX
Quantec master infrared ceiling receiver
£60.00
QT302RXS
Quantec slave infrared ceiling receiver
£45.00
QT302RT
Quantec test infrared ceiling receiver
£50.00
QUANTEC Mk2 (868MHz) RADIO RECEIVERS
QT422RX
Quantec Mk2 radio receiver (compatible with QT412 range transmitters only)
QT422RXEX External extension aerial for QT422RX radio receiver
QT421
£212.10
£150.00
RF integrity ‘monitored heartbeat’ transmitter (use at least 1 per QT442RX)
£84.60
If ordering radio receivers for an existing Quantec system, please see IMPORTANT NOTES below
QUANTEC RECHARGEABLE DUAL-ACTION INFRARED/RADIO (868MHz) TRANSMITTERS
For use with Quantec infrared call points, infrared ceiling recievers and Mk2 radio receivers
QT412RXA
Quantec Mk2 Infrared/radio transmitter (push for attack/pull for attack)
£80.00
QT412RXCA
QT424/1
QT424/10
QT423
Quantec Mk2 Infrared transmitter (push for call/pull for attack)
Single-way charging unit for QT412 range transmitters
Ten-way charging unit for QT412 range transmitters
Quantec configurator (required to program QT412 range transmitters)
£80.00
£15.00
£185.00
£115.40
If ordering transmitters for an existing Quantec system, please see IMPORTANT NOTES below
QUANTEC ANCILLARY CALLING DEVICES
Generate standard calls via a call point’s remote socket
NC805C/6
1.8m (6ft) tail call lead
£10.14
NC805C/14
4.2m (14ft) tail call lead
£11.40
NC805D
1.2-3.6m (4-12ft) tail call lead
£15.52
NC805P
Hand/foot pneumatic pad, requires 1 x NC805AS
£14.80
NC805AS
Remote air switch for NC805P
£35.36
NC805MD
Portable movement detector
£304.34
NC805DSP
Double remote jack socket, allows two ancillary calling devices to be connected
£7.90
QUANTEC PRINTERS
QT600P
Quantec printer kit incl. printer, lead & wall socket
QT600S
Quantec printer/paging wall socket
£342.15
£17.22
QUANTEC PAGING EQUIPMENT
DP874QA
Display pager transmitter for alphanumeric pagers, 400m range
incl. display pager transmitter, lead and wall socket
£841.71
DP876D
Display pager aerial, up to 1500m range
£95.00
DP876B
Mounting bracket for DP876D
£25.00
DP876F
15 metre low loss cable for DP876D
£70.00
DP877QA
32 character alphanumeric display pager, group A
£290.00
PLASTIC BACK BOXES
NCP-8
NCP-9
NCP-10
NCP-11
IMPORTANT NOTES
White 35mm flush mount UK single gang back box
White 25mm surface mount UK single gang back box
White 35mm flush mount UK double gang back box
White 25mm surface mount UK double gang back box
£1.72
£1.40
£2.44
£2.52
All of the items listed in the above Quantec trade price list are fully compatible with each other. However, if purchasing items for an existing Quantec
system, please take note of the following compatibility issues.
• Our new QT422RX radio receiver operates at a different frequency to our old QT322RX (SPE0441/000) radio receiver. If you need an old-style
radio receiver for an existing Quantec site, please contact our sales desk/technical dept. for advice.
• Our new QT412RXA and QT412RXCA transmitters are not compatible with old-style QT322RX (SPE0441/000) radio receivers as they operate at a
different frequency. If you wish to order an old-style transmitter for an existing Quantec site, please contact our sales desk/technical dept. for advice.
• Our new QT412RXA and QT412RXCA transmitters will not work with Quantec infrared call points and ceiling receivers manufactured before 1/10/99
unless they are reconfigured using a QT423 configurator. They WILL however work with all infrared call points and ceiling receivers manufactured
after this date (i.e. the vast majority of systems).
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 21
solidstatesecurity.co.uk
INDUCTION LOOP EQUIPMENT
PDA RANGE INDUCTION LOOP EQUIPMENT
PORTABLE INDUCTION LOOP KITS (approx. 1.2m2 coverage)
PL1/K1
Portable induction loop kit (supplied in a cardboard storage/carry case)
£120.00
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.
PL1/K2
Portable induction loop kit with AFILS tester (supplied in a cardboard storage/carry case)
£207.65
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker,
AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.
PL1/K3
Portable induction loop kit (supplied in a robust plastic storage/carry case)
£170.30
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.
PL1/K4
Portable induction loop kit with AFILS tester (supplied in a robust plastic storage/carry case)
£248.65
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker,
AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.
PL1/BATT
TEAR-P
Replacement battery for PL1 amplifier
Spare ‘AFILS available’ sticker
£12.35
£1.00
1.5m2 COUNTER INDUCTION LOOP AMPLIFIER KITS
ML1/K
ML1 counter induction loop kit
£60.61
c/w ML1 wall-mounting double gang loop amplifier, AMT mic. and TX2 counter loop
PDA102C
PDA102 counter induction loop kit
£140.73
c/w PDA102 free-standing loop amplifier, AMT microphone and TX121 counter loop
20m2 MINI INDUCTION LOOP AMPLIFIER
ML1
• The widest range of audio-frequency
induction loop equipment in the UK
• Designed to meet or exceed the
requirements of BS7594 and
BS-EN60118-4 when correctly installed
• Available in a variety of cost-effective
kit formats suitable for use in ticket
offices, meeting rooms, lecture
theatres, nursing homes, GP surgeries,
churches and shops
• Allows hearing aid users to participate
fully in general conversation and
other social/work related activities
• No audio experience required C-TEC’s loop systems can be fitted by
any competent electrician
DL50
DL50/K
50m2 Domestic induction loop amplifier
DL50 50m2 Domestic induction loop amplifier kit
£85.00
£98.00
c/w DL50 free-standing loop amplifier, AMT tie/desk mic., APS scart lead & loop cable
PDA102L
PDA102 50m2 Small room loop kit (tie/desk mic version)
£120.10
c/w PDA102 free-standing loop amplifier, AMT tie/desk microphone and loop cable
PDA102R
PDA102 50m2 Small room loop kit (omni-directional plated mic. version) £135.10
c/w PDA102 free-standing loop amplifier, APM plated microphone and loop cable
PDA102S
PDA102 50m2 TV lounge loop kit
£120.10
c/w PDA102 free-standing loop amplifier, Scart lead and APL connection plate and loop cable
120m2 INDUCTION LOOP AMPLIFIERS & KITS
PDA200E
AKM1
PDA200E 120m2 wall-mounting induction loop amplifier
PDA200E 120m2 Meeting/seminar room loop kit
AKL1
PDA200E 120m2 Lecture room loop kit
£177.00
£213.45
c/w PDA200E amplifier, APM omni-directional mic plate
£278.38
c/w PDA200E amplifier, AMT tie/desk mic, AML lectern mic, 2 x APJ plate
PDA200E 120m2 TV / music lounge loop kit
£267.47
c/w PDA200E amplifier, AMH handheld mic, APS scart lead, APJ plate, APL plate
AKR1
PDA200E 120m2 Waiting room loop kit
£213.45
c/w PDA200E amplifier, APL plate
AKU1
PDA200E 120m2 Retail unit loop kit
£238.45
c/w PDA200E amplifier, AML lectern mic, APJ plate
AKW1
• Can be used to help building managers
and service providers comply with
BS8300, the Disability Discrimination
Act, the Care Standards Act and the
English Tourism Council’s National
Accessibility Scheme
£53.00
50m2 INDUCTION LOOP AMPLIFIERS & KITS
AKT1
• Extensive range of induction loop
testing equipment now available
including pink noise generators,
magnetic field strength meters and
loop listening devices
Mini 20m2 wall-mounting double gang induction loop amplifier
PDA200E 120m2 Place of worship loop kit 1
£274.90
c/w PDA200E amplifier, AML lectern mic, APJ plate, APL plate
AKW2/L
PDA200E 120m2 Place of worship loop kit 2 (lavalier mic. version)
£500.60
c/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, 2 x APXM plate
AKW2/H
PDA200E 120m2 Place of worship loop kit 2 (handheld mic. version)
£500.60
c/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, 2 x APXM plate
AKH1/L
PDA200E 120m2 Health and fitness club loop kit (lavalier mic. version)
£464.15
c/w PDA200E amplifier, AMR/LA lavalier radio mic, APQM plate, APL plate
AKH1/H
PDA200E 120m2 Health and fitness club loop kit (handheld mic. version) £464.15
c/w PDA200E amplifier, AMR/HA handheld radio mic, APQM plate, APL plate
Please note: Loop cable is not included in the above ‘AK’ range kits. We recommend you use 1mm2 single core cable such
as C-TEC’s LOOP2/W cable which is available in 100m reels (see overleaf for pricing details).
PRO-RANGE (200m2 to 900m2) INDUCTION LOOP AMPLIFIERS
page 22
PDA200/2
200m2 free standing induction loop amplifier
£288.69
PDA500/2
500m2 free standing induction loop amplifier
£392.16
PDA1000/2
900m2 free standing induction loop amplifier
£448.73
PDA/RM
19” rack mount kit for PDA Pro-Range amplifier
£25.00
PDA/WM
Wall mount kit for PDA Pro-Range amplifier
£20.05
INDUCTION LOOP EQUIPMENT
PDA RANGE OUTREACH PLATE AUDIO INPUT EXTENSION SYSTEM
CAN BE USED TO INCREASE THE NUMBER OF AUDIO INPUTS ON AN INDUCTION LOOP SYSTEM*
* C-TEC’s ML1, PDA102, PDA200E and PDA Pro-Range amplifiers all have Outreach connection sockets. A separate 12V PSU
may be required when connecting outreach plates to other amplifiers. Plates should be wired using Belden 8723 audio cable.
APJ
3.5mm mono jack plate, for connection of AMT, AMH, AML or AMD microphones
£36.45
APL
Line level audio plate, for connection of APS SCART lead/other line level audio feeds
£36.45
APQM
6.35mm stereo jack plate, for connection of AMR/L & AMR/H radio microphone kit
£36.45
APQL
6.35mm stereo jack plate, for connection of line level feeds from mixing desks, etc
£36.45
APXM
XLR mic level plate, for connection of AMP microphone
£36.45
APXL
XLR line level plate, for connection of line level feeds from mixing desks, etc
£36.45
APM
Omni-directional plated microphone, for wall/ceiling/desk mounting
£36.45
API
AFILS active indicator light
£36.45
APS
SCART to double phono lead (for use with APL plate)
£3.57
PDA RANGE MICROPHONES
APM
Omni-directional plated microphone, for wall/ceiling/desk mounting
£36.45
For direct connection to ML1, PDA102, PDA200E, PDA Pro-Range or an outreach chain
NEW
NEW
NEW
NEW
NEW
NEW
AMT
AMH
AML
AMLS
AMD
AMDS
AMP
AMR/LA
AMR/LB
AMR/LC
AMR/HA
AMR/HB
AMR/HC
PRO45
Tie/desk microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate
Handheld microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate
Lectern microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate
Lectern microphone (short stemmed version of AML)
Desktop microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate
Desktop microphone (short stemmed version of AMD)
Professional handheld mic. for PDA200E or APXM outreach plate, requires AXLR lead
Lavalier radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate
Lavalier radio mic. (174.6 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate
Lavalier radio mic. (175.0 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate
Handheld radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate
Handheld radio mic. (174.6 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate
Handheld radio mic. (175.0 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate
Hanging ambient microphone for PDA Pro-Range or APXM plate
£3.48
£14.00
£30.95
£30.95
£43.33
£43.33
£138.25
£214.25
£214.25
£214.25
£214.25
£214.25
£214.25
£188.80
INDUCTION LOOP TEST EQUIPMENT
RXTI2
PNGN
AHHM
AMPN
Induction loop test receiver requires 2 x AAA batteries & walkman type headphones
Pink noise generator requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead
FoSmeter magnetic field strength meter - requires 1 x PP3 battery
FoSmeter+ combined pink noise generator & magnetic field strength meter
£58.79
£61.90
£92.86
£123.81
requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead
AHHM/H FoSmeter H combined magnetic field strength meter & loop listener
£70.00
requires 1 x PP3 battery & 32Ω headphones such as C-TEC’s HEAD1 headphones
HEAD1
AL1
AL2
AL3
32Ω headphones for use with AHHM/H
3.5mm jack to 3.5mm jack lead (connects PNGN to APJ outreach plate)
3.5mm jack to double phono lead (connects PNGN to APL outreach plate or DL50)
3.5mm jack to pre-cut bare ended lead
£22.20
£7.50
£7.50
£7.50
INDUCTION LOOP CABLE & MISCELLANEOUS OTHER AFILS ANCILLARIES
Loop cable is included in all ML1/K, DL50/K and PDA102 range induction loop kits. For PDA200E/AK Range
kits we recommend LOOP2/W cable. For other PDA range loop amplifiers, call our technical dept. for advice.
NEW
LOOP1/W
LOOP2/W
LOOP3/W
LOOP4/W
FLAT1005
FLAT2005
FLAT3005
TAPE
BELDEN/10
BELDEN/25
APT
AXLR
LEST
APPS
TEAR10
100m x 0.5mm2 single core white loop cable (for black cable order LOOP1/B)
100m x 1.0mm2 single core white loop cable (for black cable order LOOP2/B)
100m x 1.5mm2 single core white loop cable (for black cable order LOOP3/B)
100m x 2.5mm2 single core white loop cable (for black cable order LOOP4/B)
100m x 0.5mm2 insulated copper tape (flat loop cable for under carpets)
100m x 1.0 mm2 insulated copper tape (flat loop cable for under carpets)
100m x 1.5mm2 insulated copper tape (flat loop cable for under carpets)
50m white synthetic fibre tape (used to protect flat loop cable)
10m Belden 8723 four core screened cable for use with outreach plates
25m Belden 8723 four core screened cable for use with outreach plates
Loop connector plate (for the termination of induction loop cable)
XLR to XLR lead (used to connect AMP mic to APXM outreach plate)
100V line (i.e PA system output) to 0db (775mV line level) convertor
Overspill reduction phase shifter
Pack of 10 self-adhesive ‘induction loop fitted’ stickers
£21.67
£35.40
£50.55
£83.77
£71.81
£88.81
£105.81
£9.48
£17.33
£43.33
£36.45
£12.15
£25.49
£84.19
£9.11
page 23
INFRARED ASSISTIVE LISTENING SYSTEMS
INFRARED ASSISTIVE LISTENING SYSTEMS
MODULATORS / RADIATORS
SI30
0.5W modulator/radiator, 2.3/2.8MHz
£251.50
Mono/stereo operation, coverage 80m2 mono, 40m2 stereo
Requires NT20-1-UK or NT20-4-UK PSU
SZI30
Slave 0.5W radiator
£181.14
Coverage 80m2 mono, 40m2 stereo; daisychain to SI30 to increase coverage
Requires NT20-1-UK or NT20-4-UK PSU
NT20-1-UK 24VDC/200mA Plug in mains PSU for one SI30 or SZI30
• Ideal for use in areas where the
installation of an audio-frequency
induction loop system is impractical
£84.76
NT20-4-UK 24VDC/500mA Plug in mains PSU for up to four SI30/SZI30s (needs KKY20-015)
KKY20-015 4 way ‘octupus’ cable for use with NT20-4-UK
SZI1015-T
£169.50
£29.47
2W radiator/modulator, 2.3MHz
£1006.00
Mono only, coverage 400m2, requires NT1015 PSU.
• Modulators/radiators transmit sound
via invisible light beams to one or
more infrared receivers
SZI1015
• ‘Line of sight’ operation means no
‘spillover’ of the sound signal into
neighbouring rooms
NT1015
• Ideal for persons with mild or
moderate hearing loss
GZG1029
Swivel joint for mounting SI30 or SZI1015-T
£95.97
GZP10
Mounting plate for wall or ceiling mounting SI30, SZI30, SZI1015-T or SZI1015
£47.92
• Special RI150/L ‘neck loop’ receiver
converts the infrared signal into a
mini-induction loop field that can be
picked up by any hearing aid with a
telecoil / ‘T’ position
IZM20
Cluster mounting kit for up to 4 rotatable SI30/SZI30s
Each SI30/SZI30 will require a IZK20 mounting clamp
£30.31
IZK20
Mounting clip for SI30 / SZI30
£16.60
KR20-015
0.15m IR extension cable for SI30 / SZI30 when used with IZM20
£12.90
• Receivers also available for use by
the non-hearing impaired
KR20-7
2W slave radiator
£915.10
Mono only, coverage 400m2, daisychain to SZI1015-T to increase coverage
Requires NT1015 PSU
Mains PSU for one SZI1015-T or SZI1015
£184.26
ATTACHMENTS / CABLES FOR MODULATORS & RADIATORS
3.5mm mono jack to 3.5mm mono jack
7m IR extension cable for SI30/SZI30
£23.95
3.5mm mono jack to 3.5mm mono jack
RECEIVERS
RI150/L
Infrared receiver with neck induction loop for hard of hearing, mono
£147.40
c/w BA151 rechargeable accupack
RI150
Stethoset infrared receiver for able hearing, mono
£110.54
c/w BA151 rechargeable accupack
HDI302
Professional Stethoset receiver for able hearing, mono or stereo
£174.21
c/w BA151 rechargeable accupack
BA151
L151-10
NT92-UK
Spare Rechargable accupack for RI150/L, RI150, HDI302
Charger for up to 10 receivers (RI150/L, RI150, HDI302), needs NT92-UK PSU
200mA plug-in mains PSU for L151-10 charger
£17.16
£303.73
£53.45
MIXERS & MICROPHONES
page 24
MM1002
Six input mixing console
AL4
1
PRO45
Hanging ambient microphone
£122.47
/4” jack to XLR lead
£37.14
£188.80
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
POWER SUPPLIES
12V & 24V POWER SUPPLIES
12V POWER SUPPLIES
NC930
12V 250mA double gang PSU (requires back box)
£50.00
NC925B1
12V 1A boxed PSU with fault indication
£55.24
NC925B1E
12V 1A boxed PSU with no fault indication
NC925B3
12V 3A boxed PSU
£51.37
£127.66
24V POWER SUPPLIES
BF375P
24V 250mA unregulated door release PSU, supplied on a double gang plate
£41.33
BF375M
24V 1A regulated general purpose boxed PSU
£77.96
BF377
24V 2A unregulated door release boxed PSU
BF368EN
24 3A regulated boxed PSU to EN54/4
£66.21
£175.00
PLASTIC BACK BOXES
NCP-10
NCP-11
White 35mm flush mount UK double gang back box
White 25mm surface mount UK double gang back box
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£2.44
£2.52
page 25
solidstatesecurity.co.uk
NOTES
page 26
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
NOTES
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 27
solidstatesecurity.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement