Randell | CR9080 | Operator`s manual | Randell CR9080 Operator`s manual

OPERATOR’S MANUAL
This manual provides information on
installation, operating, maintenance,
trouble shooting & replacement parts for
CR9000 Series
Countertop Rails
NOTIFY CARIER OF DAMAGE AT ONCE.
It is the responsibility of the consignee to inspect the
container upon receipt of same and to determine the
possibility of any damage, including concealed
damage. Randell suggests that if you are suspicious
of damage to make a notation on the delivery receipt.
It will be the responsibility of the consignee to file a
claim with the carrier. We recommend that you do so
at once.
525 South Coldwater Road • Weidman, MI 48893
888-994-7636 • Fax 888-864-7636 • unifiedbrands.net
2/27/2008
PP MNL0018
Table of Contents
page 2………………………………….…………Congratulations
page 3……………………………………Parts & Service Hotline
page 3………………………………...…Serial Number Location
page 4-7……………………………….Randell Limited Warranty
page 8…………………………………………Unit Specifications
page 9…..………………………………………...Unit Installation
page 10………………………………………..…..Unit Operation
page 11-12………………………..…Preventative Maintenance
page 13………………………………………..Electrical Diagram
page 14……………………………………..……Troubleshooting
page 15-16…………………………….….....Replacement Parts
Congratulations on your recent purchase of Randell food service equipment,
and welcome to the growing family of satisfied Randell customers.
Our reputation for superior products is the result of consistent quality
craftsmanship. From the earliest stages of product design to successive steps
in fabrication and assembly, rigid standards of excellence are maintained by
out staff of designers, engineers, and skilled employees.
Only the finest heavy-duty materials and parts are used in the production of
Randell brand equipment.
This means that each unit, given proper
maintenance will provide years of trouble free service to its owner.
2
800-621-8560
In addition, all Randell food service equipment is backed by
some of the best warranties in the food service industry and by
our professional staff of service technicians.
Retain this manual for future reference.
NOTICE: Due to a continuous program of product improvement, Randell
reserves the right to make changes in design and specifications without prior
notice.
NOTICE: Please read the entire manual carefully before installation. If certain
recommended procedures are not followed, warranty claims will be denied.
MODEL NUMBER _________________________
SERIAL NUMBER _________________________
INSTALLATION DATE _____________________
The serial number is located on the rear of the countertop rail adjacent
to the rear vented panel.
800-621-8560
Randell Service and Parts
Hotline
unifiedbrands.net
3
Warranty Policies
Randell believes strongly in the products it builds and backs them with the best
warranty in the industry. Standard with every unit comes the peace of mind that
this unit has been thoroughly engineered, properly tested and manufactured to
excruciating tolerances, by a manufacturer with over 30 years of industry presence.
On top of that front end commitment, Randell has a dedicated staff of certified
technicians that monitor our own technical service hotline at 1-800-621-8560 to
assist you with any questions or concerns that may arise after delivery of your new
Randell equipment.
PARTS WARRANTY
1. One year parts replacement of any and all parts that are found defective in
material or workmanship.
Randell warrants all component parts of
manufactured new equipment to be free of defects in material or workmanship,
and that the equipment meets or exceeds reasonable industry standards of
performance for a period of one year from the date of shipment from any
Randell factory, assembly plant or warehouse facility.
NOTE: warranties are effective from date of shipment, with a thirty day
window to allow for shipment, installation and set-up. In the event
equipment was shipped to a site other than the final installation site,
Randell will warranty for a period of three months following installation,
with proof of starting date, up to a maximum of fifteen months from the
date of purchase.
2. Free ground freight of customer specified location for all in warranty parts
within continental U.S. Component part warranty does not cover glass
breakage or gasket replacement. Randell covers all shipping cost related to
component part warranty sent at regular ground rates (UPS, USPS). Freight
or postage incurred for any express or specialty methods of shipping are
the responsibility of the customer.
LABOR COVERAGE
In the unlikely event a Randell manufactured unit fails due to defects in
materials or workmanship within the first ninety days, Randell agrees to pay
the contracted labor rate performed by an Authorized Service Agent (ASA).
Any warranty work performed by a non-ASA will not be honored by Randell. A
complete listing of current ASAs can be found on the Randell page of our web
site : www.unifiedbrands.net. Warranties are effective from date of shipment,
with a thirty day window to allow for shipment, installation and setup. Where
equipment is shipped to any site other than final installation, Randell will honor
the labor warranty for a period of ninety days following installation with proof of
starting date, up to a maximum of six months from date of purchase.
4
800-621-8560
Temperature adjustments are not covered under warranty, due to the wide
range of ambient conditions.
For warranty inquiries call our Field Service Department at: 1-800-621-8560.
WHEN OPTIONAL 5 YEAR COMPRESSOR WARRANTY APPLIES
1. Provide reimbursement to an ASA for the cost of locally obtained
replacement compressor in exchange for the return of the defective
compressor sent back freight prepaid. Note: Randell does limit
amount of reimbursement allowed and does require bill from local
supply house where compressor was obtained (customer should not
pay servicing agent up front for compressor).
2. Provide repair at the manufacturing facility by requiring that the
defective unit be sent back to Randell freight prepaid. Perform repair at
the expense of Randell and ship the item back to the customer freight
collect.
3. Furnish complete condensing unit freight collect in exchange for the
return of the defective compressor sent back freight prepaid.
(Decisions on whether or not to send complete condensing units will be
made by Randell’s in-house service technician).
WHEN OPTIONAL LABOR EXTENSION POLICY APPLIES
Randell will provide reimbursement of labor to an ASA for any customer that
has an optional labor extension of our standard warranty. (Contracted rates do
apply) Randell offers both 1 and 2 year extensions. Labor extensions begin at
the end of our standard warranty and extend out 9 months to 1 calendar year
or 21 months to 2 calendar years from date of purchase. Please contact
Randell technical service hotline at 1-800-621-8560 for details and any
question on Authorized Service Agents (ASA).
WHEN EXPORT WARRANTIES APPLY
1. Randell covers all non-electrical components under the same
guidelines as our standard domestic policy.
2. All electrical components operated on 60 cycle power are covered
under our standard domestic policy.
3. All electrical components operated on 50 cycle power are covered for
90 days from shipment only.
4. Extended warranty options are not available from the factory.
ITEMS NOT COVERED UNDER WARRANTY
1. Maintenance type of repairs such as condenser cleaning, temperature
adjustments, clogged drains and unit leveling.
2. Randell does not cover gaskets under warranty. Gaskets are a
maintenance type component that are subject to daily wear and tear
and are the responsibility of the owner of the equipment. Because of
the unlimited number of customer related circumstances that can cause
gasket failure all gasket replacement issues are considered nonwarranty. Randell recommends thorough cleaning of gaskets on a
weekly basis with a mild dish soap and warm water. With proper care
Randell gaskets can last up to two years, at which time we recommend
replacement of all gaskets on the equipment for the best possible
performance.
unifiedbrands.net
5
NOTICE: FOOD LOSS IS NOT COVERED UNDER WARRANTY
3. Repairs caused by abuse such as broken glass, freight damage,
excessive force, or scratches and dents.
4. Electrical component failure due to water damage from cleaning
procedures.
QUOTATIONS
Verbal quotations are provided for customer convenience only and are
considered invalid in the absence of a written quotation. Written quotations
from Randell are valid for 30 days from quote date unless otherwise specified.
Randell assumes no liability for dealer quotations to end-users.
SPECIFICATION & PRODUCT DESIGN
Due to continued product improvement, specification and product design may
change without notice. Such revisions do not entitle the buyer to additions.
Changes or replacements for previously purchased equipment.
SANITATION REQUIREMENTS
Certain areas require specific annotation requirements other than N.S.F. &
U.L. standards. Randell must be advised of these specifications before
fabrication of equipment. In these special circumstances, a revised quotation
may be required to cover additional costs. Failure to notify Randell before
fabrication holds the dealer accountable for all additional charges.
CANCELLATIONS
Orders
canceled
prior
to
production scheduling
entered into
engineering/production and cancelled are subject to a cancellation charge
(contact factory for details).
STORAGE CHARGES
Randell makes every effort to consistently meet our customer’s shipment
expectations. If after the equipment has been fabricated, the customer
requests delay in shipment, and warehousing is required:
1. Equipment held for shipment at purchasers request for a period of 30
days beyond original delivery date specified will be invoiced and
become immediately payable.
2. Equipment held beyond 30 days after the original delivery date
specified will also include storage charges.
SHIPPING & DELIVERY
Randell will attempt to comply with any shipping, routing or carrier request
designated by dealer, but reserves the right to ship merchandise via any
responsible carrier at the time equipment is ready for shipment. Randell will
not be held responsible for any carrier rate differences; rate differences are
entirely between the carrier and purchaser. Point of shipping shall be
determined by Randell (Weidman, MI/Jackson, MS). At dealer’s request,
Randell will endeavor whenever practical to meet dealer’s request. Freight
charges to be collect unless otherwise noted.
6
800-621-8560
DAMAGES
All crating conforms to general motor carrier specifications. To avoid
concealed damage, we recommend inspection of every carton upon receipt.
In the event the item shows rough handling or visible damage to minimize
liability, a full inspection is necessary upon arrival. Appearance of damage will
require removing the crate in the presence of the driver. A notation must be
placed on the freight bill and signed for by the truck driver at the time of
delivery.
Any and all freight damage that occurs to a Randell piece of
equipment as a result of carrier handling is not considered under warranty, and
is not covered under warranty guidelines. Any freight damage incurred during
shipping needs to have a freight claim filed by the receiver with the shipping
carrier. Consignee is responsible for filing of freight claims when a clear
delivery receipt is signed. Claims for damages must be filed immediately
(within 10 days) by the consignee with the freight carrier and all cartons and
merchandise must be retained for inspection.
RETURNED GOODS
Authorization for return must first be obtained from Randell before returning
any merchandise.
Any returned goods shipment lacking the return
authorization number will be refused, all additional freight costs to be borne by
the returning party. Returned equipment must be shipped in original carton,
freight prepaid and received in good conditions. Any returned merchandise is
subject to a minimum handling charge (consult factory for rate).
INSTALLATION
Equipment installation is the responsibility of the dealer and/or their customer.
Randell requires all equipment to be professionally installed to ensure
adequate voltage and amperage requirements are met.
It is imperative that all casters or legs be in contact with the floor for proper
weight distribution. Shimming of casters or legs may be required.
PENALTY CLAUSES
Dealer penalty clauses, on their purchase order or contractually agreed to
between the dealer and their clients are not binding on Randell. Randell does
not accept orders subject to penalty clauses. This agreement supersedes any
such clauses in dealer purchase orders.
EXPORT POLICY
All quotations for export sales will be handled by Dorian Drake International
(www.doriandrake.com), Randell’s export management organization.
*FOOTNOTES IN REFERENCE TO PARAGRAPHS ABOVE
1. Herein called Randell.
2. NET means list price less discount, warranty, labor policy, freight, Randell delivery and other
miscellaneous charges.
CASH DISCOUNTS WILL BE CALCULATED ON NET ONLY.
unifiedbrands.net
7
Unit Specifications
CR9060 shown with optional hood cover
L
D
H*
Pan Capacity
HP
Volt
Amps
NEMA
Shit
Wt.
CR9039
39”
18”
23.5”
(3) 1/3 or (6) 1/6
¼
115/60/1
7.1
5-15P
133
CR9046
46”
18”
23.5”
(4) 1/3 or (8) 1/6
¼
115/60/1
7.1
5-15P
162
CR9053
53”
18”
23.5”
(5) 1/3 or (10) 1/6
¼
115/60/1
7.1
5-15P
191
CR9060
60”
18”
23.5”
(6) 1/3 or (12) 1/6
¼
115/60/1
7.1
5-15P
220
CR9067
67”
18”
23.5”
(7) 1/3 or (14) 1/6
¼
115/60/1
7.1
5-15P
249
CR9074
74”
18”
23.5”
(8) 1/3 or (16) 1/6
¼
115/60/1
7.1
5-15P
278
CR9080
80”
18”
23.5”
(9) 1/3 or (18) 1/6
¼
115/60/1
7.1
5-15P
307
CR9087
87”
18”
23.5”
(10) 1/3 or (20) 1/6
¼
115/60/1
7.1
5-15P
336
CR9099
99”
18”
23.5”
(11) 1/3 or (22) 1/6
¼
115/60/1
7.1
5-15P
365
Model
* Height listed is to the top of open lid assembly. Height to top of the rail at
rear is 12.09”.
8
800-621-8560
Unit Installation
SELECTING A LOCATION FOR YOUR NEW UNIT
The following conditions should be considered when selecting a location for your
unit:
1. Countertop Load: The area on which the unit will rest must be level,
free of vibration, and suitably strong enough to support the combined
weights of the unit plus the maximum product load weight.
2. Clearance: There must be a combined total of at least 4” clearance on
mechanical compartment side of the unit (right side standard).
3. Ventilation: The air cooled self contained unit requires a sufficient
amount of cool clean air. Avoid surrounding your countertop rail
around other heat generating equipment and out of direct sunlight.
Also, avoid locating in an unheated room or where the room
temperature may drop below 55° F or above 86°F.
INSTALLATION CHECKLIST
After the final location has been determined, refer to the following checklist prior to
start-up:
1. Check cord and plug of unit to assure no damage has occurred to
these components.
2. Check all sheet metal surrounding the mechanical compartment to
assure no damage has occurred in these areas.
3. Plug in unit and turn on main on/off power switch.
4. Allow unit time to cool down to temperature. A layer of frost will form
and remain around the inside perimeter of the rail.
5. Refer to the front of this manual for serial number location. Please
record this information in your manual on page 3 now. It will be
necessary when ordering replacement parts or requesting warranty
service.
6. Confirm that the unit is holding temperature. Set control to desired
temperature for your particular ambient and altitude.
NOTE:
FAILURE TO FOLLOW INSTALLATION GUIDELINES AND
RECOMMENDATIONS MAY VOID THE WARRANTY ON YOUR UNIT.
ELECTRICAL SUPPLY: The wiring should be done by a qualified electrician in
accordance with local electrical codes. A properly wired and grounded outlet will
assure proper operation. Please consult the data tag attached to the compressor
to ascertain the correct electrical requirements. Supply voltage and amperage
requirements are located on the serial number tag located inside the mechanical
housing.
NOTE: it is important that your unit has its own dedicated line. Condensing
units are designed to operate with a voltage fluctuation of plus or minus 10%
of the voltage indicated on the unit data tag. Burn out of a condensing unit
due to exceeding voltage limits will void the warranty.
unifiedbrands.net
9
Unit Operation
Randell has preset the cold control to ensure that your unit runs at an optimum
temperature, but due to varying ambient conditions, including elevation, food
product as well as type of operation, you may need to alter this temperature.
Additional adjustments can be made (within limits) by turning the control dial up or
down until the desired temperature is reached. Please allow 24 hours between
adjustments.
Your condiment pans will remain proper temperatures when utilized properly. It is
strongly recommended that the covers be kept in closed position when the unit is
not in use and between rush periods. This is especially important in the summer
months and in kitchens exceeding 86° F. Do not leave covers open for prolonged
periods of time.
Note: All individual condiment pans need to be in the rail at all times during
operation. If no product is available or necessary fill empty pans with 1” to 2”
of water as an insulating barrier.
Your CR9000 series countertop rail is equipped with a temperature adjustment
control for the refrigerated rail (Figure 1). This is found behind the rear vented
panel of the mechanical compressor housing.
Figure 1 illustrates the electrical control box inside the mechanical compartment. The thermostat
adjustment knob for the refrigerated rail is located on the top portion of the control box. Access to this
area can be obtained by removing (4) Phillips head screws located at each corner of the vented panel.
MORNING STARTUP (PREP RAIL)
1. Rail cleaning may be performed at this time.
2. Turn on rail with switch located on the front right corner of the
mechanical compartment.
3. Allow 30 minutes with lids closed for the rail to cool down before
loading product. (If the unit is starting from a full off position, 45 minutes
to 1 hour should be allowed for the unit to cool down).
4. Load the product and proceed with food preparation.
Note: Product entering the preparation table must be at 41°F or less.
EVENING SHUT DOWN (PREP RAIL)
1. Remove product from the rail at the end of the day’s preparation. The
product may be stored in any suitable holding cabinet.
2. Turn off the rail with the switch located on the front right of the
mechanical compartment.
3. Unit cleaning may be performed at this time if the frost has melted off
the surface.
10
800-621-8560
Preventive Maintenance
Randell strongly suggests a preventive maintenance program which would include
the following Monthly procedures:
If a failure of the equipment is a direct result of any of the Preventative
Maintenance guidelines being neglected the repairs will not be covered under
warranty.
1. Cleaning of all condenser coils. Condenser coils are a critical component in the
life of the compressor and must remain clean to assure proper air flow and heat
transfer. Failure to maintain this heat transfer will affect unit performance and
eventually destroy the compressor. Clean the condenser coils with coil cleaner
and/or a vacuum, cleaner and brush.
1A. Use of any filter over the condenser coil may result is poor performance of the
equipment. The factory does not recommend any auxiliary filter be used on the
condenser coil. Any failures of the unit as a result of an auxiliary filter will not be
covered under warranty.
NOTE: Brush coil in direction of fins, normally vertically as to not damage or
restrict air from passing through condenser.
2. Clean fan blade on the condensing unit.
NOTE: DO NOT USE SHARP UTENSILS.
RECOMMENDED CLEANERS FOR YOUR STAINLESS STEEL INCLUDE THE
FOLLOWING:
JOB
CLEANING AGENT
COMMENTS
Routine cleaning
Soap, ammonia, detergent Medallion
Apply with a sponge or cloth
Fingerprints and smears
Arcal 20, Lac-O-Nu, Ecoshine
Provides a barrier film
Stubborn stains and
discoloration
Cameo, Talc, Zud, First Impression
Rub in the direction of the
polish lines
Greasy and fatty acids,
blood, burnt-on foods
Easy-Off, Degrease It, Oven Aid
Excellent removal on all
finishes
Grease and Oil
Any good commercial detergent
Apply with a sponge or cloth
Restoration/Preservation
Benefit, Super Sheen
Good idea monthly
Reference: Nickel Development Institute, Diversey Lever, Savin, Ecolab, NAFEM.
NOTE: Do not use steel pads, wire brushes, scrapers, or chloride cleaners
to clean your stainless steel.
CAUTION: DO NOT USE ABRASIVE CLEANING SOLVENTS, AND NEVER
USE HYDROCHLORIC ACID (MURIATIC ACID) ON STAINLESS STEEL.
unifiedbrands.net
11
Preventive Maintenance (cont.)
Proper maintenance of equipment is the ultimate necessity in preventing costly
repairs. By evaluating each unit on a regular schedule, you can often catch and
repair minor problems before they completely disable the unit and become
burdensome on your entire operation.
For more information on preventive maintenance, consult the local ASA or
CFESA member. Most repair companies offer this service at very reasonable
rates to allow you the time you need to run your business along with the peace of
mind that all your equipment will last throughout its expected life. These services
often offer guarantees as well as the flexibility in scheduling or maintenance for
your convenience.
For a complete listing of current Randell ASA please visit www.unifiedbrands.net
Randell believes strongly in the products it manufactures and backs those products
with one of the best warranties in the industry. We believe with the proper
maintenance and use, you will realize a profitable return on your investment and
years of satisfied service.
12
800-621-8560
Electrical Diagram
unifiedbrands.net
13
Trouble Shooting Guide
SYMPTOM
Unit doesn't run
Unit short cycles
Unit runs constantly
Unit too cold
Unit noisy
14
POSSIBLE CAUSE
PROCEDURE
1. No power to unit
2. Temperature control turned off
3. Temperature control faulty
4. Compressor overheated
5. Condenser fan faulty
6. Overload protector faulty
7. Compressor relay faulty
8. Compressor faulty
1. Condenser coil dirty
2. Condenser fan faulty
3. Compressor faulty
4. Overload repeatedly tripping
1. Condenser coil dirty
2. Condenser fan faulty
3. Covers off unit
1. Temperature control set too
low
2. Temperature control faulty
1. Plug in unit (check power switch)
2. Check temperature control
3. Test temperature control
4. Clean condenser coil
5. Service condenser fan
6. Test overload
7. Test relay
8. Call ASA for service
1. Clean coil
2. Service fan and motor.
3. Call ASA for service
4. Check outlet voltage
1. Clean coil
2. Service condenser motor
3. Re-apply covers
1. Adjust control to raise setting
2. Test control
1. Compressor mountings loose
or hardened.
1. Tighten or replace compressor
mountings
2. Condenser fan damaged or
hitting fan shroud
2. Inspect condenser fan
800-621-8560
Replacement
Parts
CR9000 Series
unifiedbrands.net
15
Replacement
Parts
CR9000 Series
CR 9000 Series
ITEM
2
3
3a
3b
3c
3d
3e
3f
3g
4
4a
5
6
7
8
9
10
11
12
13
14
15
16
17
18
DESCRIPTION
Adapter bar - 13.25" x 7/8"
Hinged Cover 23"
Hinged Cover 30"
Hinged Cover 37"
Hinged Cover 44"
Hinged Cover 51"
Hinged Cover 28"
Hinged Cover 35"
Hinged Cover 42"
Pivot Pin for Pan Cover
Acorn Nut for Pivot Pin
Spacer, Rail Opening
Hinge Assy for Pan Cover
S/S Mechancial Top Cover
Louver / Compressor Side Cover
Rear Louver
Expansion Valve
Power cord w/ molded plug 8’
Condensing Unit (1/3 LT R-134a)
Compressor (AEA2410YXA)
Condenser Fan Motor
Condenser Fan Blade
Filter Drier
Power switch
Rail Thermostat
16
800-621-8560
PART #
RP BAR1325
RP PCR0802
RP PCR0803
RP PCR0804
RP PCR0805
RP PCR0806
RP PCR0807
RP PCR0808
RP PCR0809
HD PIN0101
FA NUT0403
RP SPC0801
RP HNG006
RP CVR0802
RP LVR0802
RP LVR0801
RF VLV350
EL WIR461-90
RF CON495
RF CMP495P
RF MTR0104
RF BLD0101
RF FLT251
EL SWT0502
HD CNT9902
9
0
3
9
X
X
9
0
4
6
X
9
0
5
3
X
9
0
6
0
X
9
0
6
7
X
9
0
7
4
X
9
0
8
0
X
9
0
8
7
X
9
0
9
9
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Download PDF