Malish | Floor Machine Equipment | Rotary Brush and Accessories Catalog

TABLE OF CONTENTS & APPLICATION GUIDE
How to Select the Correct Malish Rotary Product
When contacting our customer service department, please provide the
following information to help us assist you in ordering the proper product.
Brush Selection ..........................................2
Pad Driver or Brush
If your preference is to have a dedicated
product, select a brush. If you have a
variety of applications, your choice may be
a pad holder. The surface being cleaned
and the amount of dirt build-up will help
determine the selection. The key to
remember when ordering these items is
the block diameter in relationship to the
machine size. A brush is sized 2 inches
smaller than the machine because of the
flare of the brush fibers. Pad drivers are
specified 1 inch smaller than the machine.
Application Guide ......................................2
Tufted Pad Drivers ......................................3
Polymeric Face Pad Drivers ........................4
Uni-Block™ Showerfeed System..................5
Grit Rotary Brushes ....................................6
Machine Make and
Model Number
When calling customer service,
please have the machine
manufacturer and model number
to help determine the block size,
center hole diameter and clutch
plate necessary to attach the
block to the machine. If the
machine size is not apparent
from the model number, please
provide this specification.
View or download at:
www.malish.com/literature.html
General Purpose Scrubbing Brushes ..........7
Carpet Cleaning Showerfeed Brushes........8
Equipment
Reference List
How to Break in a Nylon or Polypropylene Carpet Brush
Before using a new brush on carpeting, the brush should be broken in according to the
following directions. This will eliminate possible excess drag by “tipping” the strands,
removing any possible burrs caused by the manufacturing process.
Carpet Cleaning ........................................9
Brush/Pad Combination............................10
Break-in Procedure
Sanding Drivers ........................................11
1. Mount the brush on the floor machine. Follow ALL instructions included in your
owner‘s manual.
Stone & Concrete Maintenance ......12 - 13
2. Find a rough textured floor surface, preferably unfinished concrete.
3. Operate the machine on this surface. Run the machine DRY for approximately
15-20 minutes. The brush fibers will take a slight set or lean in the direction of
machine rotation.
Clutch Plates & Pad Centering Devices ....14
Stripping:
Terrazzo
Vinyl Tile
Ceramic/Quarry Tile
Linoleum
Scarifying Concrete
Concrete Scraping
General Scrubbing:
Heavily Soiled Concrete
Moderate to Lightly
Soiled Concrete
Vinyl Tile
Terrazzo
Ceramic/Quarry Tile
Linoleum
Marble
“Raised Disc” Rubber Tile
Non-Slip Epoxy Finish
Carpet Scrubbing
Hard Surface Polishing:
“Raised Disc” Rubber Tile
Marble
Linoleum/Vinyl Tile
●
Uni-Block™ .050 Grit
Uni-Block™ .022 Grit
Uni-Block™ .022 Poly
Mastic Removal
●
●
●
●
●
●
●
SP-17
Butcher (Flat) Wire
White Tampico
Union Mix
Bassine
Wire
SpinSafe™
.020"/.025"
Polypropylene
Combination Fill
.028"
Polypropylene
.025"/.028"
Nylon
.028" Nylon
MAL-GRIT LITE™
MAL-GRIT SCRUB™
MAL-GRIT™
Applications
MAL-GRIT XTRA™
Product
Application
Guide
CLEAN GRIT™
4. Rinse the brush to remove any dirt caught when running machine. The brush is
now ready to be used on carpeting.
TM
Diamabrush By Malish............................15
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
© 2014, The Malish Corporation. All rights reserved.
2
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
TUFTED PAD DRIVERS
A. PAD-LOK™
BSEEST
LL ER
A
Heavy polypropylene strands trimmed irregular at 3/4" are staple set in our TUFF-BLOCK®, making
this the superior tufted pad driver choice. Tufts penetrate into the pad for secure holding power.
Includes our 1-1/4" thick plastic riser. (Can also be ordered without riser.)
B. MAL-LOK™ Style I
1" offset trimmed heavy polypropylene tufts penetrate pad at different depths for maximum
holding power. An excellent choice for use on automatic machines and for bonnets and yarn pads.
A
PAD-LOK™
B
MAL-LOK™
Style I
Block
Type
Block
Diameter
782710
782711
782712
782713
782714
782715
782716
782717
782718
782719
782720
782721
782722
782450
782451
782452
782453
782454
782455
782456
782457
782458
782459
782460
782461
—
Wood
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
10"
11"
12"
13"
14"
15"
16"
17"
18"
19"
20"
21"
22"
B
Risers
C
D
E
F
G
H
Plastic risers are available in thicknesses of either 1-1/4" (standard) or 1-1/2". Marine grade
plywood risers are available for use on wood blocks or when non-standard center hole
dimensions are required.
Part No.
Description
Diameter
Center Hole
Height
Photo Ref.
ZRPLRISER
ZRPLR125
ZRPLR150
ZR12080000
ZR14080000
NPSP
Plastic Riser
Plastic Riser
Plastic Riser
Wood Riser
Wood Riser
Spacer
6-3/4"
6-3/4"
6-3/4"
8"
8"
6-3/4"
5"
4 or 5"
4 or 5"
1/2"
1/2"
5"
1-1/4"
1-1/4"
1-1/2"
1-1/4"
1-1/2"
3/8"
C
D
E
F
G
H
WARNING!
Do not use brush or pad with flammable
materials (fuels, solvents, thinner, etc.) or
serious bodily harm or injury could result
from possible fire or explosion.
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
3
POLYMERIC FACE PAD DRIVERS
A
Patent
Pending
A. TRI-LOK™
MALISH
EXCLUSIVE
Revolutionary, patent pending design combines the NP-9200 TRU-FIT® Universal Clutch Plate,
built-in riser and a triangular showerfeed system for a cost-effective pad driver capable of
handling the toughest jobs. Drives all standard or economy floor pads and bonnets.
B. MIGHTY-LOK® BSEELLSERT
The molded polymer pad face has hundreds of individual hooks that grip into the threads of
a floor pad and hold it securely while operating. The solid block includes a built-in riser and
showerfeed holes allow use with solution dispensing machines.
C. MIGHTY-LOK® 3
B
NEW
This multi-purpose pad driver can be used with diamond discs as well as pads, bonnets, and
abrasive pucks. The molded polymer pad face has hundreds of individual hooks that grip
into the threads of a floor pad, bonnet or diamond disc and hold it securely while the
machine is operating. The pad driver includes a molded riser and universal Malish NP-9200
Tru-Fit® Clutch Plate mounted onto the block.
D. SURE-LOK®
MALISH
EXCLUSIVE
The SURE-LOK® System is an exclusive Malish design for use on dual and high speed
(300 rpm) machines. The SURE-LOK® face combines our MIGHTY-LOK® molded polymer
pad gripping material with a foam cushion to absorb vibration and a stiff plastic backing
to stabilize the unit. SURE-LOK® REQUIRES THE USE OF THE HIGH SPEED RISER (E).
E. HIGH SPEED RISER
C
D
The High Speed Riser further smoothes operation of the SURE-LOK® System. Works with all
Malish standardized 5"center hole Clutch Plates, including the NP-9200 TRU-FIT® Universal
Clutch Plate.
A
TRI-LOK™
Block
Type
Block
Diameter
789215NP92
789216NP92
789217NP92
789218NP92
789219NP92
789220NP92
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
15"
16"
17"
18"
19"
20"
B
C
D
Block
MIGHTY-LOK® MIGHTY-LOK® 3 SURE-LOK® Diameter
786713
786714
786715
786716
786717
786718
786719
786720
786721
786722
Part No.
E
786713XNP
786714XNP
786715XNP
786716XNP
786717XNP
786718XNP
786719XNP
786720XNP
—
—
—
—
786755
786756
786757
786758
786759
786760
—
—
E
Description
780071 High Speed Riser for SURE-LOK®
Remember: Never use a pad driver without a pad and
replace pads on a regular basis. This will protect the pad
driver material and ensure longer effective life.
Replacement facings available.
4
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
13"
14"
15"
16"
17"
18"
19"
20"
21"
22"
UNI-BLOCK™ SHOWERFEED SYSTEM
UNI-BLOCK™ Showerfeed System
MALISH
EXCLUSIVE
All-in-one design for convenience and economy! Uni-Block™ Showerfeed System combines
an injection molded polypropylene block with the patented NP-9200 TRU-FIT® Universal
Clutch Plate and either a pad driver, grit brush or poly brush. The Uni-Block™ line includes
Uni-Block™ Tufted Pad Driver, Uni-Block™ Grit Brush (available in two different grits) or
Uni-Block™ Poly Brush, depending on the application.
Every product in the Uni-Block™ Showerfeed System is manufactured to exacting
performance specifications for durability and peak performance.
• Designed to fit industry-standard 17" and 20" floor machines
• Available with 16" or 19" Pad Drivers
• Choose from 15" or 18" Poly and Grit Brushes
• Fiberglass-reinforced nylon NP-9200 TRU-FIT® Universal Clutch Plate built into the
block for added strength
Part
No.
Block
Dia.
Grit
Size
Machine
Size
UNI-BLOCK™ PAD DRIVER
With molded riser and NP-9200 TRU-FIT® Universal Clutch Plate
862716
16"
Tufted Pad Driver
Red
—
862719
19"
Tufted Pad Driver
Red
—
—
—
17"
20"
UNI-BLOCK™ POLY SCRUB
With NP-9200 TRU-FIT® Universal Clutch Plate
852415
15" General Purpose Scrub Brush Black
852418
18" General Purpose Scrub Brush Black
.022
.022
—
—
17"
20"
UNI-BLOCK™ GRIT SCRUB/STRIP
With NP-9200 TRU-FIT® Universal Clutch Plate
854115
15"
Grit Scrub Brush
Grey
854118
18"
Grit Scrub Brush
Grey
853215
15"
Grit Strip Brush
Black
853218
18"
Grit Strip Brush
Black
.022
.022
.050
.050
120
120
80
80
17"
20"
17"
20"
Description
Filament
Color
Filament
Dia.
A Revolutionary, Cost-Effective Concept in
Rotary Brushes and Pad Drivers
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
5
GRIT ROTARY BRUSHES
A
MAL-GRIT™ brushes offer solutions to a wide range of cleaning situations. Silicone
carbide impregnated nylon bristles are self-replenishing as brush wears, offering
unmatched value that outlasts floor pads over 100 to 1! That translates directly into
time and cost savings. Featuring our water and chemical resistant TUFF-BLOCK® for
maximum life expectancy. All grit brushes must be run in a wet environment. Trim
Length: 1-1/2".
A. MAL-GRIT LITE™
Offers the durability of grit brushes with minimum aggression. For daily scrubbing of a
variety of tiles, marble, terrazzo and non-slip epoxy finishes.
B
B. CLEAN-GRIT™
An excellent general scrubbing brush for frequent maintenance cleaning. Flexible enough
for cleaning narrow grout lines and uneven surfaces.
NEW
C. MAL-GRIT SCRUB™
Ideal for daily scrubbing and maintenance. While the smaller diameter bristles offer flexibility,
the larger grit size offers exceptional scrubbing.
D. MAL-GRIT™
C
BSEEST
LL ER
Our most popular grit brush. An aggressive brush for general scrubbing or stripping finishes
from hard surfaces. Effectively cleans wide grout lines.
E. MAL-GRIT XTRA™
The most aggressive grit available. This heavy gauge nylon with larger grit is used for
stripping heavily soiled floors, such as concrete floors in an industrial setting.
Bristle Color
MAL-GRIT LITE
™
CLEAN-GRIT™
D
Grit Size
Pad Replacement
Red
.018
500
Light Scrubbing - Red
Blue
.035
180
Medium Scrubbing - Blue
MAL-GRIT SCRUB™
Green
.022
120
General Scrubbing - Green
MAL-GRIT™
Black
.050
80
Stripping - Black
Orange
.070
46
High Productivity - Black
MAL-GRIT XTRA
A
MAL-GRIT LITE™
(RED)
E
Bristle Diameter
™
B
CLEAN-GRIT™
(BLUE)
C
MAL-GRIT SCRUB™
(GREEN)
D
MAL-GRIT™
(BLACK)
E
MAL-GRIT XTRA™
(ORANGE)
Block
Type
Block
Diameter
773410
776510
773010
773210
773610
Wood
10"
813411
776511
813011
773211
773611
Plastic
11"
813412
776512
813012
773212
773612
Plastic
12"
813413
816513
813013
813213
813613
Plastic
13"
813414
816514
813014
813214
813614
Plastic
14"
813415
816515
813015
813215
813615
Plastic
15"
813416
816516
813016
813216
813616
Plastic
16"
813417
816517
813017
813217
813617
Plastic
17"
813418
816518
813018
813218
813618
Plastic
18"
813419
816519
813019
813219
813619
Plastic
19"
813420
816520
813020
813220
813620
Plastic
20"
813421
816521
813021
813221
813621
Plastic
21"
Ideal for use on irregular surfaces and grout lines where pads are
ineffective.
6
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
GENERAL PURPOSE & NATURAL FIBER SCRUBBING BRUSHES
All Malish showerfeed brushes feature our water and chemical-resistant
TUFF-BLOCK® Showerfeed System for improved performance and long lasting life.
A
TUFF-BLOCK® Showerfeed
For cleaning hard surfaces. Nylon and polypropylene scrubbing brushes feature .028"
diameter fill material throughout the block. Nylon is more flexible and will last the
longest, while polypropylene is an economical alternative. Steel Wire (.014" diameter)
is the most aggressive of the series, for use on unfinished concrete surfaces.
A
Nylon
(.028" Diameter)
B
Polypropylene
(.028" Diameter)
772910
772410
772911
772411
772912
772412
772913
772413
772914
772414
772915
772415
772916
772416
772917
772417
772918
772418
772919
772419
772920
772420
772921
772421
*Does not include showerfeed hole
C
Steel
Wire
Block
Type
Block
Diameter
773810
773811
773812
773813
773814
773815
773816
773817
773818
773819
773820
773821
Wood
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
10" *
11" *
12" *
13"
14"
15"
16"
17"
18"
19"
20"
21"
B
C
Rinse nylon brushes with hot water for 5 to 10 minutes to help
the nylon recover its form.
A
Natural Fiber Scrubbing Brushes
These brushes are used for a variety of hard surface scrubbing and polishing.
(See Application Chart on Page 2.)
A. Bassine
Bassine is used for general scrubbing purposes. Water absorption properties make this an
excellent, low cost choice for hard surface scrubbing.
B. Union Mix
A combination of
Palmyra and White
Tampico used in
hard surface
polishing
applications.
C. White
Tampico
100% White Tampico
is naturally acid
resistant. That makes
this the ideal choice
for use in the marble
polishing industry.
A
Bassine
B
Union Mix
770110
770210
770111
770211
770112
770212
770113
770213
770114
770214
770115
770215
770116
770216
770117
770217
770118
770218
770119
770219
770120
770220
770121
770221
*Does not include showerfeed
C
White
Tampico
770610
770611
770612
770613
770614
770615
770616
770617
770618
770619
770620
770621
holes
Block
Type
Block
Diameter
Wood
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
10" *
11" *
12" *
13"
14"
15"
16"
17"
18"
19"
20"
21"
B
C
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
7
CARPET CLEANING (SHOWERFEED) BRUSHES
SPINSAFE™ Carpet Brush
The Malish SpinSafe™ carpet brush utilizes a
smooth stainless steel adjustable glide plate to
allow the brush to easily glide over the carpet.
This protects the integrity of the carpet, reduces
drag, and increases efficiency.
Adjustment
screws raise
glide plate as
bristles wear.
• Adjustable stainless steel glide plate
• Reduces operator fatigue
• Increases productivity
• Efficient and cost-effective
• No break-in process required
• Designed to fit 17"or 20" floor machines
Part
No.
Block
Dia.
Description
Filament
Color
Filament
Dia.
Machine
Size
732915*
732918*
15"
18"
Carpet Brush w/ Glide Plate
Carpet Brush w/ Glide Plate
Black
Black
.014
.014
17"
20"
*Includes NP-9200 clutch plate
Carpet Shampoo Brushes
On brushes 14” in diameter and larger,
the two outer rows are heavier to
scrub the carpet and flex the pile while
the softer inner rows “massage“ the
dirt from the carpet for a deeper
cleaning action.
A. Nylon
The best quality brush for this application. Nylon is flexible and supple enough to gently scrub
carpets, yet has more “memory“ than other fibers for a longer lasting brush.
B. Polypropylene
A low cost alternative to nylon for situations that call for less frequent use. Ideal for the rental
trade. Bristles are slightly stiffer than nylon.
A
A
Nylon
B
812910
812911
812912
812913
812914
812915
812916
812917
812918
812919
812920
812921
Nylon
Diameter
.025
.025
.025
.025
.025/.028
.025/.028
.025/.028
.025/.028
.025/.028
.025/.028
.025/.028
.025/.028
B
Polypropylene
812410
812411
812412
812413
812414
812415
812416
812417
812418
812419
812420
—
Polypropylene
Diameter
Block
Type
Block
Diameter
.020
.020
.020
.020
.020/.025
.020/.025
.020/.025
.020/.025
.020/.025
.020/.025
.020/.025
.020/.025
Wood
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
10"
11"
12"
13"
14"
15"
16"
17"
18"
19"
20"
21"
ATTENTION!!
These carpet brushes must be broken in as described on Page 2.
8
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
CARPET CLEANING
A
Carpet Bonnet Systems
A. BONNET-LOK™
The BONNET-LOK™ System is a brush/bonnet combination in a single unit. The exclusive
design allows both the brush and the bonnet to extend to the wall for maximum coverage
and effectiveness.
B. BONNET-LOK II
Part No.
Description
Photo Ref.
A brush/bonnet combination
similar to the BONNET-LOK™ but
with a circular design.
785017**
785019**
785057*
785059*
785117
785119
785157*
785159*
17" BONNET-LOK™ Driver
19" BONNET-LOK™ Driver
17" Carpet Bonnet for #785017
19" Carpet Bonnet for #785019
17" BONNET-LOK™ II Driver
19" BONNET-LOK™ II Driver
14" Carpet Bonnet for #785117
16" Carpet Bonnet for #785119
A
A
A
A
B
B
B
B
™
B
C
* Must be ordered in cases of 6
** Bonnets not included
C. The Malish Solution Tank
The new Malish Solution Tank provides features designed to improve cleaning performance,
reduce labor time, and limit the utilization of chemicals.
Durable Construction
The large-capacity, 4-gallon tank features durable, damage-resistant, rotational-molded
polyethylene, machined brass hardware, and a flow control valve which allows operators to
properly manage the amount of solution used during cleaning.
Numerous Mounting Options
Multiple mounting patterns allow operators to quickly and easily install the Solution Tank on
a wide variety of machines.
• Extra-wide opening makes tank easier to fill and helps prevent chemical spills
• Visual gradation marks on the tank make it simple for operators to monitor
volume levels
Part No.
Description
Photo Ref.
890010
Solution Tank - 4 gal.
C
890014
Solution Tank Hardware Kit
D
890015
Square Handle Hardware Kit*
E
E
D
* For Nilfisk, Nobles or Tennant machines
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
9
BRUSH/PAD COMBINATION
The Malish POWER-PAD® is a unique combination of a brush to handle all the “lows” and a
pad driver to clean all the “highs.” This design creates a multi-level scrubbing action that
produces results superior to standard rotary brushes and pad drivers. Reduces the need for
multiple passes during floor stripping or scrubbing. Ideal for use on unsealed or sealed
concrete, terrazzo, vinyl tile, ceramic/quarry tile and linoleum.
A
A. POWER-PAD® / MAL-GRIT LITE™
MALISH
EXCLUSIVE
A perfect union of durable brush and pad driver with minimum aggression. For daily
scrubbing of a variety of tiles, marble, terrazzo and non-slip epoxy finishes.
B. POWER-PAD® / CLEAN-GRIT ™
B
MALISH
EXCLUSIVE
An excellent general scrubbing brush/pad combination for frequent maintenance cleaning.
Flexible enough for cleaning narrow grout lines and uneven surfaces.
C. POWER-PAD® / MAL-GRIT ™
MALISH
EXCLUSIVE
Combines our most popular grit brush with a pad driver for general scrubbing or stripping
finishes from hard surfaces. Effectively cleans wide grout lines.
C
Part
No.
Block
Dia.
Fill
Name
Grit
Color
Fill Grit
Dia. Size
Pad
Size
Pad
Color
Application
Photo
Ref.
785317
785319
785617
785619
785417
785419
17"
19"
17"
19"
17"
19"
MAL-GRIT LITE™
MAL-GRIT LITE™
CLEAN-GRIT™
CLEAN-GRIT™
MAL-GRIT™
MAL-GRIT™
Grey
Grey
Blue
Blue
Black
Black
.018
.018
.035
.035
.050
.050
13"
15"
13"
15"
13"
15"
Grey
Grey
Blue
Blue
Black
Black
Light Scrubbing
Light Scrubbing
Scrubbing
Scrubbing
Stripping
Stripping
A
A
B
B
C
C
500
500
180
180
80
80
Always remove your brush or pad driver from the machine
after use. Hang up to extend life. Always clean and rinse
brushes thoroughly, especially after stripping jobs. Chemicals
can be harmful to skin and eyes.
WARNING!
Do not use brush or pad with flammable materials (fuels,
solvents, thinner, etc.) or serious bodily harm or injury could
result from possible fire or explosion.
Cutaway view of POWER-PAD® in use.
10
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
SANDING DRIVERS
Replacement
Component
A. Economy Sandpaper Driver
Our Economy Sandpaper Driver is made from a plastic one-piece
block. A 3/8" foam pad and stamped metal centering device
provide the holding power. This lightweight unit is excellent for
the rental trade or for infrequent use situations. Includes our
NP-9200 TRU-FIT® Universal Clutch Plate to fit most machines.
A
Complete Unit Order As: ZASANDCTR
B. Heavy Duty Sandpaper Driver
Our professional-grade Heavy Duty Sandpaper Driver is constructed from marine
grade plywood and features a 3/8" thick foam pad for gripping sandpaper. A durable
aluminum casting centers the sandpaper and will provide years of service. Includes our
NP-9200 TRU-FIT® Universal Clutch Plate to fit most machines. Riser is attached.
B
Replacement Components
Flat Washer Order As:
ZASANDFLAT
Complete Unit Order As:
ZASANDISC
Aluminum
Sandcasting Disc Order As:
ZASANDCAST
Hex Nut (left hand) Order As:
ZASANDHEX
Aluminum
Casting Cup Order As:
ZASANDCUP
1/2” - 13 x 1-5/16”
LH Threaded Stud Order As:
ZASANDSTUD
C. Diamabrush™ By Malish Hardwood Prep Tool*
C
MALISH
EXCLUSIVE
The Diamabrush™ Hardwood Prep Tool is designed to remove polyurethane and carpet
adhesives from hardwood floors, effectively preparing the floor for refinishing. The diamond
cutting surface remains free of melted or gummed up coating and retains its sharp cutting
points throughout the life of the tool. Replacement blade kits available.
NOTE: For Single Disk CCW Only
*See Diamabrush™ By Malish price list.
D. ORBO-LOK™
D
MALISH
EXCLUSIVE
This Malish innovation turns standard floor machines into orbital motion sanders. Use with
a loose weave pad and sandscreen. The orbital motion of the ORBO-LOK™ reduces
backswirl marks while the pad absorbs dust, allowing increased sanding efficiency and
reduced mess! Includes our P-200 Clutch Plate to fit most machines.
A
Sandpaper DriverEconomy
—
—
782014
782015
782016
782017
782018
782019
—
B
C
Sandpaper DriverDiamabrush™
Heavy Duty
Hardwood Prep Tool
—
—
781014
781015
781016
781017
781018
781019
781020
931201212
931301212
931401212
931501212
—
—
—
—
—
D
ORBO-LOK™
Block
Diameter
—
—
782214
782215
782216
782217
782218
782219
—
12"
13"
14"
15"
16"
17"
18"
19"
20"
For sandscreening, use a loose weave pad in between
ORBO-LOK™ and sandscreen to minimize dust and reduce
clogging of the sandscreen.
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
11
STONE & CONCRETE MAINTENANCE
Malish offers an innovative line of superior quality, multi-purpose stone and
concrete products.
A
A. Diamabrush™ By Malish Mastic Removal Tool*
MALISH
EXCLUSIVE
The Diamabrush™ Mastic Removal Tool is designed to remove stubborn coatings from
concrete such as mastic, carpet or tile adhesive, or thin-set and thin mil coatings like
urethane and paint. Diamond-coated blades grind tough coatings away. Mounts to any
standard floor buffer or auto scrubber. Replacement blade kits available.
*See Diamabrush™ By Malish price list.
DIAMABRUSH™
Mastic Tool (25 grit) CCW
DIAMABRUSH™
Mastic Tool (25 grit) CW
Block
Diameter
921201202*
921301202*
921401202*
921501202*
921601202*
921701202
921801202
921901202
922001202
921201201*
921301201*
921401201*
921501201*
921601201*
921701201
921801201
921901201
922001201
12"
13"
14"
15"
16"
17"
18"
19"
20"
*12" – 16" Mastic Tools are only recommended for use on single disc swing machines
B. SP-17 Surface Prep Tool w/Dual Position Blade Holders
B
BSEEST
LL ER
The SP-17 floor surface preparation tool is an environmentally safe and productive tool for
scraping concrete floors. The SP-17 was designed for scraping hard surface deposits
including epoxy, fiberglass, glues, grout, ice, packed soils, paint and a variety of build-up on
concrete surfaces. It is recommended to rotate cutter blades in a synchronized pattern to
optimize cutter life and maximize production.
C / C1. Replacement Carbide Cutters and
Dual Position Blade Holders
MALISH
EXCLUSIVE
Dual position blade holders are designed with a “knockdown” position (see B left) as well as
a rear slot for aggressive scraping.
C
C1
Part No.
Description
Photo Ref.
825017*
17"Surface Prep Tool
B
825003S
“8-way” Carbide
Cutters (set of 3)
C
825011
Carbide Insert Holders
(individual)
C1
* Includes NP-9200 clutch plate
12
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
STONE & CONCRETE MAINTENANCE
A. Aluminum Back Diamond Disc / Pad Driver
MALISH
EXCLUSIVE
Features a special face material which provides excellent holding power for diamond discs
and a variety of floor pads. This heavy duty cast block (11 lbs.) provides ultimate rigidity
when used with diamond discs and extra weight needed when used in polishing, scrubbing
or grinding applications.
B. TUFF-BLOCK® Diamond Disc / Pad Driver
A
MALISH
EXCLUSIVE
These multi-purpose drivers feature our TUFF-BLOCK® plastic showerfeed block with special
driver face material which provides superior holding power on either diamond discs or pads.
C. Flat Butcher Wire
Scarifying brush uses staple set butcher wire to cut through dirt and build-up on concrete
floors and scratch the surface clean.
D. MIGHTY-LOK® 3
B
NEW
This multi-purpose pad driver can be used with diamond discs as well as pads, bonnets,
and abrasive pucks. The molded polymer pad face has hundreds of individual hooks that
grip into the threads of a floor pad, bonnet or diamond disc and hold it securely while
the machine is operating. The pad driver includes a molded riser and universal Malish
NP-9200 Tru-Fit® Clutch Plate mounted onto the block.
Part No.
Description
Block Diameter
Photo Ref.
824017
782716X
782717X
782719X
773712S
773713S
773714S
773715S
773716S
773717S
773718S
773719S
773720S
773721S
786713XNP
786714XNP
786715XNP
786716XNP
786717XNP
786718XNP
786719XNP
786720XNP
Aluminum Diamond Driver with Applix
TUFF-BLOCK® Applix Diamond Driver
TUFF-BLOCK® Applix Diamond Driver
TUFF-BLOCK® Applix Diamond Driver
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
Flat Butcher Wire
MIGHTY-LOK®3
MIGHTY-LOK®3
MIGHTY-LOK®3
MIGHTY-LOK®3
MIGHTY-LOK®3
MIGHTY-LOK®3
MIGHTY-LOK®3
MIGHTY-LOK®3
17"
16"
17"
19"
12"
13"
14"
15"
16"
17"
18"
19"
20"
21"
13"
14"
15"
16"
17"
18"
19"
20"
A
B
B
B
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
C
D
WARNING!
Concrete floor tools must be operated by experienced professional floor machine operators only. Operator must wear protective face shield, ear
protection, footwear, and dust mask. Designed to be used on a standard 175 RPM rotary floor machine with a 1-1/2 HP motor ONLY.
DO NOT USE WITH OR NEAR FLAMMABLE MATERIALS!
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
13
CLUTCH PLATES & PAD CENTERING DEVICES
A
B
Clutch Plates
A. TRU-FIT® Universal Clutch Plate (NP-9200)
MALISH
EXCLUSIVE
Designed to flex vertically and compress horizontally to reduce machine wobble
and operator fatigue.
C
Part No.
Patent #4,391,548 (other patents pending)
D
E
F
G
H
I
J
K
L
Fits Machines
Center Hole Required
NP-9200
Most Std. Speed Machines
5"
NP-47
Advance Std. Speed Machines (pre-1997)
5"
P-200
Most Std. Speed Machines
4"
NP-46
Hild Std. Speed Machines
5"
G-400 X
Tennant 14" and above
5"
G-400 S
Tennant 13" and under
5"
G-200 MM
Minute-Man Autoscrubbers
5"
G-100
Clarke Autoscrubbers
4.84"
ANP-92
Universal Metal Plate
5"
NP-83
For General Machines (pre-1987)
5"
P-900
Alto/Clarke Industries
3.375"
L-801 P
Kent Autoscrubbers
1.875" or 2.875"
L-800 P
Advance/Nobles Autoscrubbers/others
varies**
Photo Ref.
A
B
C
D
E
*
F
G
H
I
J
K
L
*Not shown
**Call customer service with machine make and model number to ensure proper selection.
Don’t See Your Clutch Plate Listed?
Contact Malish customer service. The clutch plates on this
page represent the most popular “plates,” but Malish also
offers other, less requested clutch plates that may be
appropriate for your needs.
B
A
Which Clutch Plate Is Required?
Malish can supply clutch plates for most machines on the market. If you have
an original clutch plate, we will ask you for the center hole diameter of your
existing brush. Measure the inside diameter from your existing brush or pad
holder to obtain this information.
Pad Centering Devices
A. CENTER-LOK® 3
C
Patent #5,806,132
D
E
F
G
H
I
MALISH
EXCLUSIVE
Can be used on left or right rotation machines. Recommended for use on high
speed machines.
Part No.
Thread
Handing**
Description
Color
Photo
Ref.
792460
792465
792405
790002
792710
792410
790004
792455
790054
N/A
N/A
LH
LH
N/A
RH
RH
RH
RH
CENTER-LOK® 3
CENTER-LOK® 4 Large Center Hole
CENTER-LOK® II
CENTER-LOK® II-Top Only
CENTER-LOK®
CENTER-LOK® II
CENTER-LOK® II-Top Only
BIG-MOUTH®
BIG-MOUTH®-Top Only
Tan
Natural
Red
Red
Orange
Black
Black
Blue
A
B
C
*
D
E
*
F
792450
790052
792451
792456
LH
LH
LH
RH
BIG-MOUTH®
BIG-MOUTH®-Top Only
BIG MOUTH® II-Long Thread
BIG MOUTH® II-Long Thread
Blue
Grey
Grey
Natural
Black
*
G
*
H
I
* Not shown
** Viewed from the operator’s position, specify left hand thread on pad drivers spinning
counterclockwise or right hand thread if spinning clockwise.
14
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
FLOOR PREPARATION SYSTEM
By Malish
Floor Preparation System
TM
The Diamabrush By Malish Floor Preparation System is a
comprehensive system of products designed to bring
efficiency and ease of use to the floor preparation
process. The system includes four different types of tools
to accomplish concrete floor polishing, mastic removal
and hardwood prep.
TM
The key to the Diamabrush By Malish System is the
patented diamond grit technology that is used on the
Prep Tool to prepare the surface and is also utilized in
progressively finer grits on the Polishing Tools to polish
the floor. The diamond grit technology and attachments
are ideal for coating removal, surface preparation,
scarifying, honing, leveling, and polishing. The
beauty of the system is that no new
equipment is required. All
Diamabrush By Malish tools
may be used on standard lowpressure commercial floor
cleaning machines including
single discs, walk-behind and rideon auto scrubbers.
TM
The multi-step system allows users to
determine how they want to use the
system. Once the desired gloss is achieved,
it can be maintained while engaging in the
normal everyday floor cleaning regimen.
For specialty applications like Mastic Removal or
Hardward Prep, the Diamabrush By Malish
System features task-specific tools designed to get
the job done effectively and efficiently.
TM
TM
Rejuvenate concrete floors with Diamabrush By Malish!
Splash Guard™ by Malish NEW
The perfect companion to the Diamabrush™ By Malish System,
Splash Guard™ by Malish fits all rotary brush machines and
scrubbers up to 20 inches in diameter. Designed to minimize the
messy splash that results when running machines, Splash Guard™
is made of flexible polypropylene and withstands and contains the
grittiest of debris creating a cleaner working environment.
Part No. SWINGSG
TO ORDER: 800.321.7044 • Fax: 440.951.0293 • E-mail: info@malish.com • www.malish.com
15
A global leader in floor care
products, The Malish Corporation
offers a broad line of rotary/disc
brushes and accessories for
commercial floor machines. From
pad drivers to color-coded grit
brushes to carpet cleaning brushes,
the industry has turned to Malish for
quality and innovation since 1948.
Corporate Headquarters
4260 Hamann Parkway, Willoughby, Ohio 44094 USA
European Sales and
Distribution Center
Oosterout, The Netherlands
Dong Guan Malish Cleaning
Equipment Co., Ltd.
Dong Guan City, Guang Dong,
China 523127
Our reputation has been built on
service, dedication and an
uncompromising commitment to
produce the best quality brushes in
the industry. That commitment does
not end at the point of sale. Our
customer service and application
support are pillars of our business. In
short, when you partner with Malish,
we take that partnership seriously
through the performance of our
products to our on-time delivery.
Malish Means More!
The Malish Corporation
4260HamannParkway
Willoughby,OH44094
440.951.5356
800.321.7044
Request our Sanitary Brush
and Maintenance Products
Catalog or download it from
www.malish.com
Fax:440.951.0293
info@malish.com
www.malish.com
Request our DiamabrushTM By
Malish Floor Restoration System
Catalog or downoad it from
www.diamabrushbymalish.com
FormNo.1013-5M
Download PDF