Crestron | CLSI-C6M | CLSI-C6M

iLux™ Integrated Lighting System w/Motion Detector - International Version
The iLux CLSI-C6M is a complete, integrated lighting system designed
for wall mount installation in boardrooms, auditoriums, home theaters,
or anywhere versatile and cost-effective control of lighting and
shades is required. Crestron's reputation for innovation and
reliability, combined with high-quality integrated dimming, native
shade control, configurable rocker buttons, extensive integration
ability and many other advanced features make iLux the ideal choice
for all types of room lighting and shade control applications.
6 Channel Dimming
The CLSI-C6M features six channels of dimming for LED*, incandescent,
magnetic low-voltage, neon/cold cathode, and 2-wire dimmable
fluorescent loads. On/off switching of many non-dimmable lighting
loads is also possible. Each channel will handle up to 800 watts
individually, with a total rating of up to 2400 watts for the complete
unit. Larger loads and additional load types can also be supported
using Crestron CLS-EXP Series expansion modules.
6 Group Shade Control
Using Crestron's networked Shade and Drape Controllers, the CLSI-C6M
enables versatile control of a roomful of motorized window treatments,
screens and lifts in up to 6 shade groups.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount
of control and customization to suit each unique room application.
Large ON and OFF buttons provide instant access to the "On" and "All
Off" scenes, while the six main buttons can be set up to recall
additional scene presets, adjust shades, or perform a host of other
functions. The buttons' "rocker" action enables intuitive, tactile
control for adjusting lighting levels and shade
positions. An additional "Up/Down" button is configurable for a
variety of functions, including use as a master lighting or shade
control, or as a "shift" button to expand the capabilities of the six
main buttons.
With each new scene selection, window shades reposition and lights
fade elegantly to their new settings. The selected scene is indicated
by a white LED beside each button, and the customizable label strip
allows each button to be clearly labeled using Crestron Engraver
software or standard 3/8" tape labels. Dimming levels and shade
positions are displayed graphically on 6 green LED bargraphs
accessible behind the flip-up front cover. Additional controls and a
numeric display hidden beneath the cover enable setup without
requiring a PC. Enhanced customization is provided via the PC
programming port using iLux Designer software.
Built-in Motion Detector
The CLSI-C6M features a built-in infrared motion detector, enabling
automated control based on room occupancy. Lights can be programmed to
turn on and shades open automatically when someone enters the room,
or turn off and close when the room is left empty.
Multipoint Keypad Control
Up to 16 Crestron keypads may be connected to a single CLSI-C6M,
providing versatile multipoint control for rooms with multiple
entrances or work areas.
Multi-Unit Expansion
One CLSI-C6M master will support up to 8 additional CLSI-C6 or
CLSI-C6M units, enabling systems of up to 54 lighting zones and 54
shade groups. Commands for typical functions like scene recall, scene
off, master dimming, and occupancy status are shared between the
CLSI-C6(M) units. Each individual unit can still support a complete
assortment of local devices including keypads and shade controllers.
Control System Integration
The CLSI-C6M features two separate Cresnet® control networks, one for
local devices and one for connection to a 2-Series control system.
Connecting the CLSI-C6M to a control system allows its functions to be
controlled from touchpanels, RF wireless remotes, and even computers.
The control system interface also enables extensive flexibility for
integration with other systems such as security, HVAC and energy
management, plus remote monitoring via SNMP and Crestron RoomView®
For a solution using Crestron's infiNET wireless technology instead of
Cresnet, see the CLSI-C6MRF.
* For a list of compatible ballasts, visit www.crestron.
com/lightingcompatibility (PDF)
> Wall mount integrated lighting and shade control
> 6 channels of dimming or switching
> 6 groups of shade and drape control
> Linkable for up to 54 lighting channels and 54 shade
> Up to 16 user-settable scenes
> 7 configurable "rocker" buttons with customizable label
> Large ON and OFF buttons
> Flip-up front cover reveals setup controls and
> 6 bargraphs show lighting levels and shade positions
> Easy setup from front panel or iLux Designer software
> Built-in motion detector
> Supports multipoint control using up to 16 keypads
> Optional IR remote
> Master air-gap relay
> Integrates with 2-Series Control Systems via Cresnet
> Energy saving ASHRAE 90.1/LEEDS compliant
> Available in almond, black, or white
Load Ratings
Dimmer Channels: 6
Maximum Per Channel: 800 Watts/VA (3.5 Amps @ 230 Volts AC)
Minimum Per Channel : 25 Watts/VA (0.108 Amps @ 230 Volts AC)
Module Total: 2200 Watts/VA (10 Amps @ 220 Volts AC);
2300 Watts/VA (10 Amps @ 230 Volts AC);
2400 Watts/VA (10 Amps @ 240 Volts AC)
Load Types: LED*, Incandescent, Magnetic Low-voltage, Neon/Cold Cathode,
2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic Lowvoltage, 3 and 4-Wire Fluorescent, High-Inrush Switching, & 277V via CLSEXP Series expansion modules)
Power Requirements
220 to 240 Volts AC, 50/60Hz line power
LOCAL DEVICES: (1) 4-pin 5mm detachable terminal block;
Cresnet Master port for local devices including:
• C2N-DB and CNX-B Series keypads, 16 maximum;
• C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum;
• Additional CLSI-C6M or CLSI-C6 units, 8 maximum;
Additional CNPWSI-75 or other Cresnet power supply required beyond 4
devices; C2N-SDC-DC always requires an additional power supply
CONTROL SYSTEM: (1) 4-pin 5mm detachable terminal block;
Cresnet Slave port for connection to a 2-Series control system
HOT: (1) Captive screw terminal†, line power input
LOAD1 - LOAD6: (6) Captive screw terminals†, dimmer channel outputs 1 - 6
NEUTRAL: (1) Captive screw terminal†
GROUND: (1) Captive screw terminal†
PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port
Buttons 1 - 6: (6) 3-position rocker pushbuttons; configurable to recall (or
toggle recall/off) individual scenes, control shades, or for master lighting or
shade control; “scene mastering” option enables manual dimming utilizing
rocker button action; also used to adjust lighting levels when in “Lighting”
mode and shade positions when in “Shades” mode; additional functionality
configurable via software
Up/Down Button: (1) 3-position rocker pushbutton; configurable for master
lighting or shade control, or as a “shift” for Buttons 1-6; additional
functionality configurable via software
ON: (1) pushbutton, recalls “On” scene
OFF: (1) pushbutton, turns all lights off
LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes
SAVE, CANCEL, UP, DOWN: (4) Pushbuttons, navigate and execute setup
Reset: Recessed miniature pushbutton for hardware reset
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
Dimming Ramp Rate: 5 seconds (default), software adjustable 1 to 10
Scene Fade Time: 2 seconds (default), software adjustable 0 seconds to 99
LED Indicators
Scenes: (6-white) Correspond with each “Scene” Button
High/Low: (2-white) Indicate “Shift” status
ON: (1-white) Indicates “On” Scene is selected
LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active
SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons
MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”
1 - 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade
Numeric Display: (2-green) 8-Segment digits, indicates modes and setup
IR Receiver
Reception Frequency: 36 kHz
Requires CLS-IRHT8 IR remote, sold separately
Motion Detector
Type: Infrared
Range: 20 to 30 feet at 4 foot elevation
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Mounts in a 4-gang electrical box, 3-1/2" deep minimum
Height: 4.48 in (11.38 cm)
Width: 8.89 in (22.58 cm)
Depth: 2.60 in (6.61 cm)
1.43 lb (0.65 kg)
* For a list of compatible ballasts, visit
lightingcompatibility (PDF)
† Captive screw terminals accept up to two 22 to 12 AWG (0.34 to 4.0 mm²)
wires per terminal.
Available Models
CLSI-C6MA: iLux Integrated Lighting System with motion detector International Version, 230V, almond
CLSI-C6MB: iLux Integrated Lighting System with motion detector International Version, 230V, black
CLSI-C6MW: iLux Integrated Lighting System with motion detector International Version, 230V, white
Available Accessories
CLS-EXP-DIM: iLux™ Dimmer Expansion Module
CLS-EXP-DIMFDB: iLux™ 3-Wire Fluorescent Dimmer Expansion Module
CLS-EXP-DIMFLV: iLux™ 0-10V Fluorescent Dimmer Expansion Module
CLS-EXP-DIMU: iLux™ Universal Dimmer Expansion Module
C2N-DB6-W-S: Decorator Keypad, 6-Buttons, White, Gloss
C2N-DB6-A-S: Decorator Keypad, 6-Buttons, Almond, Gloss
C2N-DB8-W-S: Decorator Keypad, 8-Buttons, White, Gloss
C2N-DB8-A-S: Decorator Keypad, 8-Buttons, Almond, Gloss
C2N-DB12-W-S: Decorator Keypad, 12-Buttons, White, Gloss
C2N-DB12-A-S: Decorator Keypad, 12-Buttons, Almond, Gloss
C2N-SDC-DC: Shade and Drape Controller, 24V DC
C2N-SSC-2: Somfy® Shade Controller
CLS-IRHT8: iLux IR Handheld Remote
CNPWSI-75: Cresnet Power Supply, 75 Watts - International Version, 230V
CNX-B2-W-T: Designer Keypad, 2-Buttons, White, Matte
CNX-B2-A-T: Designer Keypad, 2-Buttons, Almond, Matte
CNX-B2-LAT-T: Designer Keypad, 2-Buttons, Latte, Matte
CNX-B2-DSK-T: Designer Keypad, 2-Buttons, Dusk, Matte
CNX-B4-W-T: Designer Keypad, 4-Buttons, White, Matte
CNX-B4-A-T: Designer Keypad, 4-Buttons, Almond, Matte
CNX-B4-LAT-T: Designer Keypad, 4-Buttons, Latte, Matte
CNX-B4-DSK-T: Designer Keypad, 4-Buttons, Dusk, Matte
CNX-B6-W-T: Designer Keypad, 6-Buttons, White, Matte
CNX-B6-A-T: Designer Keypad, 6-Buttons, Almond, Matte
CNX-B6-LAT-T: Designer Keypad, 6-Buttons, Latte, Matte
CNX-B6-DSK-T: Designer Keypad, 6-Buttons, Dusk, Matte
CNX-B8-W-T: Designer Keypad, 8-Buttons, White, Matte
CNX-B8-A-T: Designer Keypad, 8-Buttons, Almond, Matte
CNX-B8-LAT-T: Designer Keypad, 8-Buttons, Latte, Matte
CNX-B8-DSK-T: Designer Keypad, 8-Buttons, Dusk, Matte
CNX-B12-W-T: Designer Keypad, 12-Buttons, White, Matte
CNX-B12-A-T: Designer Keypad, 12-Buttons, Almond, Matte
CNX-B12-LAT-T: Designer Keypad, 12-Buttons, Latte, Matte
CNX-B12-DSK-T: Designer Keypad, 12-Buttons, Dusk, Matte
CRESNET-HP-NP-TL-SP1000: Cresnet® "High-Power" Control Cable, nonplenum, teal, 1000 ft spool
CRESNET-HP-NP-TL-SP500: Cresnet® "High-Power" Control Cable, nonplenum, teal, 500 ft spool
CRESNET-NP-BK-B500: Cresnet® Control Cable, non-plenum, black, 500 ft
CRESNET-NP-OR-B500: Cresnet® Control Cable, non-plenum, orange, 500
ft box
CRESNET-NP-TL-B250: Cresnet® Control Cable, non-plenum, teal, 250 ft
CRESNET-NP-TL-B500: Cresnet® Control Cable, non-plenum, teal, 500 ft
CRESNET-NP-TL-SP1000: Cresnet® Control Cable, non-plenum, teal, 1000
ft spool
CRESNET-NP-TL-SP500: Cresnet® Control Cable, non-plenum, teal, 500 ft
CRESNET-NP-YL-B500: Cresnet® Control Cable, non-plenum, yellow, 500 ft
CRESNET-P-BK-SP500: Cresnet® Control Cable, plenum, black, 500 ft spool
CRESNET-P-OR-SP500: Cresnet® Control Cable, plenum, orange, 500 ft
CRESNET-P-TL-SP1000: Cresnet® Control Cable, plenum, teal, 1000 ft
CRESNET-P-TL-SP500: Cresnet® Control Cable, plenum, teal, 500 ft spool
CRESNET-P-YL-SP500: Cresnet® Control Cable, plenum, yellow, 500 ft
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
All brand names, product names and trademarks are the property of their respective owners.
©2011 Crestron Electronics, Inc.
Specifications subject to change without notice. 11/3/2011
Download PDF