Magnadyne | S-DV424 | Operating instructions | Magnadyne S-DV424 Operating instructions

XV-DV323.book 1 ページ 2004年1月13日 火曜日 午後7時57分
DVD/CD Receiver
XV-DV323
XV-DV424
Speaker System
S-DV323
S-DV424
Operating Instructions
XV-DV323.book 2 ページ 2004年1月13日 火曜日 午後7時57分
Location: underside of the unit
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead, within
an equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
D3-4-2-1-1_En
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
The wires in this mains lead are coloured in
accordance with the following code:
Blue
: Neutral
Brown : Live
If the plug provided is unsuitable for your socket
outlets, the plug must be cut off and a suitable plug
fitted.
The cut-off plug should be disposed of and must
not be inserted into any 13 amp socket as this can
result in electric shock. The plug or adaptor or the
distribution panel should be provided with 5 A fuse.
As the colours of the wires in the mains lead of this
appliance may not correspond with coloured
markings identifying the terminals in your plug,
proceed as follows ;
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
WARNING: The apparatus is not waterproofs, to
prevent fire or shocks hazard, do not expose this
apparatus to rain or moisture and do not put any
water source near this apparatus, such as vase,
flower pot, cosmetics container and medicine
D3-4-2-1-3_En
bottle etc.
Do not connect either wire to the earth terminal of a
three pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in
the plug must be replaced with a fuse cover which
corresponds to the colour of the insert in the base
of the plug or the word that is embossed on the
base of the plug, and the appliance must not be
used without a fuse cover. If lost replacement fuse
covers can be obtained from your dealer.
Only 5 A fuses approved by B.S.I or A.S.T.A to
B.S.1362 should be used.
D3-4-2-1-2-2_En
VENTILATION:
European, UK, Australian, New Zealand, Hong
Kong and Taiwanese models:
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 10 cm at top, 10 cm at rear, and
10 cm at each side).
All other models:
WARNING:
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230V
or 120V) written on the rear panel.
D3-4-2-1-4_En
WARNING: No naked flame sources, such as
lighted candle, should be placed on the apparatus.
If naked flame sources accidentally fall down, fire
spread over the apparatus then may cause fire.
D3-4-2-1-7a_En
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 20 cm at top, 15 cm at rear, and
15 cm at each side).
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, to prevent fire hazard, the openings
should never be blocked and covered with items,
such as newspapers, table-cloths, curtains, etc. Also
do not put the apparatus on the thick carpet, bed,
D3-4-2-1-7b_En
sofa, or fabric having a thick pile.
XV-DV323.book 3 ページ 2004年1月13日 火曜日 午後7時57分
CAUTION
This product contains a laser diode of higher class
than 1. To ensure continued safety, do not remove any
covers or attempt to gain access to the inside of the
product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
CLASS 1
LASER PRODUCT
D3-4-2-1-8_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
D3-4-2-1-9a_En
93/68/EEC).
For U.S. and Australia Model
Operating Environment
Operating environment temperature and humidity:
+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install in the following locations
• Location exposed to direct sunlight or strong artificial
light
• Location exposed to high humidity, or poorly
D3-4-2-1-7c_En
ventilated location
The STANDBY/ON switch is secondary connected
and therefore, does not separate the unit from mains
power in STANDBY position. Therefore install the
unit suitable places easy to disconnect the MAINS
plug in case of the accident. The MAINS plug of unit
should be unplugged from the wall socket when left
D3-4-2-2-2a_En
unused for a long period of time.
CAUTION
These speaker terminals can be under HAZARDOUS
VOLTAGE. When you connect or disconnect the
speaker cables, to prevent the risk of electric shock, do
not touch uninsulated parts before disconnecting the
D3-4-2-2-3_En
power cord.
C67-7-3_En
D6-8-2-1_En
XV-DV323.book 4 ページ 2004年1月13日 火曜日 午後7時57分
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model
properly. After you have finished reading the instructions, put them in a safe place for future
reference.
Contents
01 Before you start
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Disc / content format playback
compatibility . . . . . . . . . . . . . . . . . . . . . . . .6
CD-R/RW compatibility . . . . . . . . . . . . . . .7
DVD-R/RW compatibility . . . . . . . . . . . . . .7
PC-created disc compatibility . . . . . . . . . .7
Compressed audio compatibility . . . . . . . .7
About WMA. . . . . . . . . . . . . . . . . . . . . . . .7
JPEG file compatibility . . . . . . . . . . . . . . . .7
02 Controls and displays
Front panel . . . . . . . . . . . . . . . . . . . . . . . . .8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote control . . . . . . . . . . . . . . . . . . . . .10
03 Getting started
Switching on and setting up . . . . . . . . . . .13
Setting the clock . . . . . . . . . . . . . . . . . . .14
Home theater sound setup . . . . . . . . . . . .15
Using the Room Setup . . . . . . . . . . . . . . . .15
Setting up the remote to control your TV . .16
Using the on-screen displays . . . . . . . . . . .16
Playing discs . . . . . . . . . . . . . . . . . . . . . . .17
Basic playback controls. . . . . . . . . . . . . .17
Resume and Last Memory . . . . . . . . . . . .18
DVD-Video disc menus . . . . . . . . . . . . . .19
Video CD/Super VCD PBC menus . . . . . .20
Listening to the radio . . . . . . . . . . . . . . . . .20
Improving poor FM reception . . . . . . . . .21
Memorizing stations . . . . . . . . . . . . . . . .21
Listening to station presets . . . . . . . . . . .22
Listening to other sources . . . . . . . . . . . . .22
04 Listening to your system
About the listening modes . . . . . . . . . . . . .23
Auto listening mode . . . . . . . . . . . . . . . . .23
4
En
Listening in surround sound . . . . . . . . . . . 24
Dolby Pro Logic II Music settings . . . . . . 24
Using the Advanced Surround effects . . . . 25
Using Front Surround . . . . . . . . . . . . . . . . 25
Adjusting the Advanced and Front
Surround effect level . . . . . . . . . . . . . . . . 26
Listening in stereo . . . . . . . . . . . . . . . . . . . 26
Listening with headphones . . . . . . . . . . . . 26
Enhancing dialogue . . . . . . . . . . . . . . . . . 27
Listening with a virtual surround back
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using Quiet and Midnight listening
modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adjusting the bass and treble . . . . . . . . . . 28
Boosting the bass level . . . . . . . . . . . . . . . 28
05 Playing discs
Scanning discs . . . . . . . . . . . . . . . . . . . . . 29
Playing in slow motion . . . . . . . . . . . . . . . 29
Frame advance/frame reverse . . . . . . . . . . 29
Using the Disc Navigator to browse the
contents of a disc . . . . . . . . . . . . . . . . . . . 30
Looping a section of a disc . . . . . . . . . . . . 31
Using repeat play . . . . . . . . . . . . . . . . . . . 31
Using random play . . . . . . . . . . . . . . . . . . 32
Creating a program list . . . . . . . . . . . . . . . 33
Using the OSD . . . . . . . . . . . . . . . . . . . . 33
Other functions available from the
program menu . . . . . . . . . . . . . . . . . . . . 33
Using the front panel display . . . . . . . . . 34
Clearing the program list . . . . . . . . . . . . 34
Searching a disc . . . . . . . . . . . . . . . . . . . . 34
Switching subtitles . . . . . . . . . . . . . . . . . . 35
Switching the DVD audio language. . . . . . 35
Switching VR format DVD-RW audio
channel . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Switching the Video CD/Super VCD
audio channel . . . . . . . . . . . . . . . . . . . . . . 36
XV-DV323.book 5 ページ 2004年1月13日 火曜日 午後7時57分
Zooming the screen . . . . . . . . . . . . . . . . .
Switching camera angles . . . . . . . . . . . . .
Displaying disc information . . . . . . . . . . .
OSD disc information . . . . . . . . . . . . . .
Front panel display information . . . . . . .
36
36
36
36
37
Deutsch
Playing a JPEG slideshow . . . . . . . . . . . . 38
Using the JPEG Disc Navigator and Photo
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Zooming the screen . . . . . . . . . . . . . . . . . 39
English
06 Viewing JPEG discs
Connecting using the component video
output . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
About progressive scan video . . . . . . . . .55
Using the SCART AV output. . . . . . . . . . . .56
Switching the TV audio input from
SCART to RCA . . . . . . . . . . . . . . . . . . . . .57
Using this unit with a Pioneer plasma
display . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Using the SR+ mode with a Pioneer
plasma display . . . . . . . . . . . . . . . . . . . .58
13 Additional information
07 More tuner features: RDS
08 Using the timer
Setting the wake-up timer . . . . . . . . . . . . 42
Turning the wake-up timer on/off . . . . . . 42
Setting the sleep timer . . . . . . . . . . . . . . . 43
44
44
45
46
10 Video Adjust menu
11 Initial Settings menu
Using the Initial Settings menu . . . . . . . .
Video Output settings . . . . . . . . . . . . . . . .
Language settings . . . . . . . . . . . . . . . . . .
Display settings . . . . . . . . . . . . . . . . . . . .
Options . . . . . . . . . . . . . . . . . . . . . . . . . .
Parental Lock . . . . . . . . . . . . . . . . . . . . .
49
49
50
51
51
51
12 Other connections
Connecting external antennas . . . . . . . . .
Connecting auxiliary components . . . . . .
Recording mode . . . . . . . . . . . . . . . . . .
Connecting using the S-video output . . . .
53
53
54
55
Español
Video Adjust . . . . . . . . . . . . . . . . . . . . . . . 48
Creating your own presets . . . . . . . . . . . 48
Nederlands
Using the System Setup menu . . . . . . . . .
Surround and sound setup options . . . .
SR+ control options for Pioneer
plasma displays . . . . . . . . . . . . . . . . . . .
Setting the channel levels . . . . . . . . . . . .
Italiano
09 Surround sound and other settings
Français
An introduction to RDS . . . . . . . . . . . . . . 40
Displaying RDS information . . . . . . . . . 41
Searching for RDS programs . . . . . . . . . 41
Optional system settings . . . . . . . . . . . . . .59
System Setup menu options in
standby . . . . . . . . . . . . . . . . . . . . . . . . . .59
Watching NTSC on a PAL TV
(MOD. PAL) . . . . . . . . . . . . . . . . . . . . . . . .60
Resetting the system . . . . . . . . . . . . . . . . .60
Using and taking care of discs . . . . . . . . . .61
Titles, chapters and tracks. . . . . . . . . . . .61
DVD Video regions . . . . . . . . . . . . . . . . .61
Handling discs . . . . . . . . . . . . . . . . . . . .61
Storing discs . . . . . . . . . . . . . . . . . . . . . .62
Discs to avoid . . . . . . . . . . . . . . . . . . . . .62
Proper installation and maintenance of
this system . . . . . . . . . . . . . . . . . . . . . . . .62
Hints on installation . . . . . . . . . . . . . . . .62
Cleaning the pickup lens . . . . . . . . . . . . .63
Problems with condensation . . . . . . . . . .63
Moving the system unit . . . . . . . . . . . . . .63
Power cord caution . . . . . . . . . . . . . . . . .63
Troubleshooting. . . . . . . . . . . . . . . . . . . . .64
General . . . . . . . . . . . . . . . . . . . . . . . . . .64
DVD/CD/Video CD player. . . . . . . . . . . . .65
WMA/MP3/JPEG discs . . . . . . . . . . . . . .66
Tuner. . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Error Messages . . . . . . . . . . . . . . . . . . . .67
Screen sizes and disc formats . . . . . . . . . .68
Widescreen TV users. . . . . . . . . . . . . . . .68
Standard TV users . . . . . . . . . . . . . . . . . .68
Selecting languages using the language
code list . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Language code list . . . . . . . . . . . . . . . . . .69
Country code list . . . . . . . . . . . . . . . . . . . .69
Preset code list . . . . . . . . . . . . . . . . . . . . .70
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . .71
Specifications . . . . . . . . . . . . . . . . . . . . . .72
5
En
XV-DV323.book 6 ページ 2004年1月13日 火曜日 午後7時57分
01
Before you start
Chapter 1
Before you start
Features
• 24-bit/96kHz compatible DAC
This system is fully compatible with high
sampling-rate discs, capable of delivering
exceptional sound quality in terms of dynamic
range, low-level resolution and high-frequency
detail.
• Surround sound entertainment with
Dolby Digital and DTS software
The built-in Dolby Digital and DTS decoders let
you enjoy great surround sound with Dolby
Digital and DTS discs.
Disc / content format playback
compatibility
This player is compatible with a wide range of
disc types (media) and formats. Playable discs
will generally feature one of the following logos
on the disc and/or disc packaging. Note
however that some disc types, such as
recordable CD and DVD, may be in an
unplayable format—see below for further
compatibility information.
DVD-Video
• Pure Cinema progressive scan video
Not applicable to the European model
When connected to a progressive scancompatible TV or monitor using the
component video outputs, you can enjoy
extremely stable, flicker free images, with the
same frame refresh rate as the original movie.
Audio CD
• Picture zoom
See Zooming the screen on page 36.
• MP3 and WMA compatibility
See Compressed audio compatibility on page 7.
• JPEG compatibility
See JPEG file compatibility on page 7.
• Graphical on-screen displays
Setting up and using your DVD home theater
system is made very easy using the graphical
on-screen displays.
• Energy saving design
This system is designed to use 0.5 W of power
when in standby.
6
En
DVD-R
Video CD
DVD-RW
CD-R
CD-RW
Fujicolor CD
•
is a trademark of Fuji Photo Film Co. Ltd.
• Also compatible with KODAK Picture CD
This player supports the IEC’s Super VCD standard for superior picture quality, dual
soundtracks, and widescreen support.
VIDEO
CD
Super Video CD (Super VCD)
Before_you_start.fm 7 ページ 2004年1月13日 火曜日 午後9時19分
Before you start
• VBR WMA playback: No
• WMA lossless encoding compatible: No
• DRM (Digital Rights Management)
compatible: Yes (DRM-protected audio
files will not play in this player). See also
DRM in the Glossary on page 71.
• Multi-session playback: No
• File extensions: .mp3, .wma (these must be
used for the player to recognize MP3 and
WMA files – do not use for other file types)
• Unfinalized disc playback: Yes
• File structure: Up to 999 files per folder
Français
DVD-R/RW compatibility
Deutsch
• Compatible formats: CD-Audio, Video CD/
Super VCD, ISO 9660 CD-ROM* containing
MP3, WMA or JPEG files
* ISO 9660 Level 1 or 2 compliant. CD
physical format: Mode1, Mode2 XA Form1.
Romeo and Joliet file systems are both
compatible with this player.
English
CD-R/RW compatibility
01
About WMA
• Unfinalized playback: No
• WMA/MP3/JPEG file playback on DVD-R/
RW: No
Discs recorded in packet write mode (UDF
format) are not compatible with this player.
Check the DVD-R/RW or CD-R/RW software
disc boxes for additional compatibility
information.
Compressed audio compatibility
• Compatible formats: MPEG-1 Audio Layer 3
(MP3), Windows Media Audio (WMA)
• Sampling rates: 32, 44.1 or 48kHz
WMA is an acronym for Windows Media Audio
and refers to an audio compression technology
developed by Microsoft Corporation. WMA
content can be encoded by using Windows
Media® Player version 7, 7.1, Windows Media®
Player for Windows® XP, or Windows Media®
Player 9 Series.
Español
Discs recorded using a personal computer
may not be playable in this unit due to the
setting of the application software used to
create the disc. In these particular instances,
check with the software publisher for more
detailed information.
The Windows Media® logo printed on the box
indicates that this player can playback
Windows Media Audio content.
Nederlands
PC-created disc compatibility
Italiano
• Compatible formats: DVD-Video, Video
Recording (VR)*
* Edit points may not play exactly as edited;
screen may go momentarily blank at edited
points.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
JPEG file compatibility
• Compatible formats: Baseline JPEG and
EXIF 2.1* still image files up to 8 megapixels are supported (maximum vertical
and horizontal resolution is 5120 pixels).
*File format used by digital still cameras
• Bit-rates: Any (128Kbps or higher
recommended)
• File extensions: .jpg (must be used for the
player to recognize JPEG files – do not use
for other file types)
• VBR (variable bit rate) MP3 playback: Yes
• File structure: Up to 999 files per folder
7
En
XV-DV323.book 8 ページ 2004年1月13日 火曜日 午後7時57分
02
Controls and displays
Chapter 2
Controls and displays
Front panel
2
3
4
5
0 OPEN/CLOSE
6 DVD/CD
7
FM/AM
1
6
7
– DOWN VOL. UP +
STANDBY/ON
PHONES
12
1
Operation indicator
2 OPEN/CLOSE
Press to open/close the disc tray.
3 DVD/CD
Press to switch to the DVD/CD function. Also
press to start/pause/resume playback.
4 Press to stop playback.
5 FM/AM
Press to switch to the tuner function, then to
toggle between the FM and AM bands.
6 VOLUME buttons
Use to adjust the volume.
7 STANDBY/ON
Press to switch the system on or into standby.
8 PHONES jack
Headphone jack.
9 Timer indicator
Lights when the wake-up timer is set (page 42).
8
En
11
10
9
8
10 Display
See Display on page 9 for detailed information.
11 Remote sensor
12 Disc tray
XV-DV323.book 9 ページ 2004年1月13日 火曜日 午後7時57分
Controls and displays
02
1 2
3
6
7
8
MIDNIGHT QUIET
PGM
RPT -1
RDM
ATT
9 10
REC MODE
kHz
MHz
19
Tuner indicators
European model only
Lights when a broadcast is being received.
2 Lights when a disc is playing.
3 MIDNIGHT
Lights when the Midnight mode is selected
(page 27).
4 QUIET
Lights when the Quiet mode is selected
(page 27).
5 PGM
Lights when a program list has been
programmed (page 33).
ADV.SURR.
PRGSVE
17 16 15 14
6 RPT and RPT-1
RPT lights during repeat play. RPT-1 lights
during repeat one-track play (page 31).
7 RDM
Lights during random play (page 32).
8 ATT
Lights when the input attenuator is active for
the currently selected analog input (page 59).
9 REC MODE
Lights when the Rec Mode is on (page 54).
10 Timer indicators
Lights when the wake-up timer is set
(page 42).
Español
Lights when FM mono reception is
selected.
PRO LOGIC
DIGITAL
Nederlands
Lights when a stereo FM broadcast is being
received in auto stereo mode.
13
Italiano
Lights when in one of the RDS display or
search modes.
12
Français
1
18
11
Deutsch
5
4
English
Display
Lights when the sleep timer is active
(page 43).
11 2 PRO LOGIC II
Lights during Dolby Pro Logic II decoding
(page 24).
12 2 DIGITAL
Lights during playback of a Dolby Digital
source (page 24).
9
En
XV-DV323.book 10 ページ 2004年1月13日 火曜日 午後7時57分
02
Controls and displays
13 Speaker indicators
These show which speakers are being used to
output the current source (they are not
placement diagrams). The illustrations below
show some example displays.
5.1 channel surround sound
Remote control
STANDBY/ON
1
2
FM/AM
TUNER
5
5.1 channel surround sound with
Virtual Surround Back mode active
14 PRGSVE
Not applicable to the European model
Lights when progressive scan video output is
selected (page 50).
15 ADV.SURR.
Lights when one of the Advanced or Front
Surround listening modes is selected
(page 25).
16
Lights during playback of a DTS source
(page 24).
17 kHz / MHz
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM).
18 Character display
19
Lights during multi-angle scenes on a DVD
disc (page 36).
10
En
LINE
0
8
1
4
3
4
12
RETURN
DVD MENU
13
TUNE+
ST–
7
11
¡
7
6
3.1 channel sound with Dialogue
enhancement on the center
channel
L1/L2
TV
OPEN/CLOSE
3
4
Stereo (2.1 channel) sound
CD
DVD
FRONT
SURROUND
ST+
ENTER
MUTE
TUNE–
SOUND
8
14
9
MASTER
VOLUME
TV CONTROL
10
15
16
17
18
19
20
21
CH
INPUT
BASS MODE DIALOGUE
SURROUND ADVANCED
VOL
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
MAIN
SUB
22
ENTER
ROOM SETUP
Important
• Functions printed in green on the remote
control are accessed by switching the
MAIN/SUB switch to SUB.
1 STANDBY/ON
Press to switch the system on or into standby.
2 Function select buttons
Press to select the source you want to listen to
(DVD (CD). TUNER, TV, LINE)
XV-DV323.book 11 ページ 2004年1月13日 火曜日 午後7時57分
Controls and displays
02
4
Disc playback controls
and /
Use for reverse slow motion playback,
frame reverse and reverse scanning.
Press to stop playback.
9 MASTER VOLUME
Use to adjust the volume.
10 TV CONTROL (page 16)
Press to switch the TV on or into standby.
INPUT
Press to switch the TV input.
CH +/–
Use to select channels on the TV.
VOL +/–
Use to adjust the volume on the TV.
11 OPEN/CLOSE
Press to open/close the disc tray.
6 DVD MENU
Press to display a DVD disc menu, or the Disc
Navigator if a VR format DVD-RW, CD, Video
CD/Super VCD, MP3, WMA or JPEG disc is
loaded.
13 RETURN
Press to return to a previous menu screen.
ENTER
Press to select an option or execute a
command.
TUNE +/–
Use to tune the radio.
12 Press to jump to the next chapter/track.
Español
Cursor buttons
Use the cursor buttons (///) to
navigate on-screen displays and menus.
Nederlands
5 Press to jump to the beginning of the current
chapter/track, then to previous chapters/
tracks.
7 Cursor buttons, ENTER and tuning
buttons
Italiano
Press to pause playback; press again to
restart.
MUTE
Press to mute all sound from the speakers
and headphones (press again to cancel).
Français
and /
Use for forward slow motion playback,
frame advance and forward scanning.
8
Deutsch
Press to start or resume playback.
ST +/–
Use to select station presets when
listening to the radio.
English
3 FRONT SURROUND
Use to select a Front Surround listening mode
(page 25).
14 SOUND
Press to access the sound menu, from which
you can adjust the DSP effect level, bass and
treble, etc.
15 Surround sound mode/sound
enhancement buttons
SURROUND
Use to select a Surround mode (page 24).
ADVANCED
Use to select an Advanced Surround mode
(page 25).
VIRTUAL SB
Press to switch the Virtual Surround Back
speaker effect on/off (page 27).
11
En
XV-DV323.book 12 ページ 2004年1月13日 火曜日 午後7時57分
02
Controls and displays
BASS MODE
Use to select a Bass Mode (page 28).
DIALOGUE
Use to select a Dialogue mode (page 27).
CH LEVEL
Use to adjust the speaker level (page 46).
16 DVD/CD buttons
AUDIO
Press to select an audio channel or
language (page 35).
SUBTITLE
Press to display/change the DVD subtitle
display (page 35).
ANGLE
Press to change camera angle during DVD
multi-angle scene playback (page 36).
PROGRAM
Use to program/play a program list
(page 33–34).
REPEAT
Use to select a repeat play mode (page 31).
RANDOM
Use to select a random play mode
(page 32).
17 ZOOM
Press to change the screen zoom level
(page 36).
TOP MENU
Use to display the top menu of a DVD disc
in the play position (this may be the same
as pressing DVD MENU).
HOME MENU
Press to display (or exit) the on-screen
menu for Initial Settings, Play Mode
functions, etc.
18 SYSTEM SETUP
Use to make various system and surround
sound settings (page 44).
12
En
TEST TONE
Use to output the test tone (for speaker
setup) (page 46).
QUIET/MIDNIGHT
Use to select the Quiet and Midnight
modes (page 27).
19 DIMMER
Press to switch between normal and
dimmed front panel display.
DISPLAY
Press to display/change disc information
shown on-screen (page 36).
TIMER/CLOCK
Press to display the clock and to access the
timer menu (page 14 and page 42).
20 SR+
Press to switch the SR+ mode on/off
(page 58).
FOLDER –
Press to jump to previous folders.
FOLDER +
Press to jump to the next folder.
CLR
Press to clear an entry.
ENTER
Selects menu options, etc. (works exactly
the same as the ENTER button in 7 above).
21 MAIN/SUB
Change from MAIN to SUB to access the
functions/commands printed in green on the
remote.
ROOM SETUP
Press to start Room Setup (page 15).
22 Number buttons
Use the number buttons for selecting
chapters/tracks from a disc directly.
XV-DV323.book 13 ページ 2004年1月13日 火曜日 午後7時57分
Getting started
03
English
Chapter 3
Getting started
After making sure everything is connected up
properly, you’re ready to switch on. The first
thing to do is to tell the system what kind of TV
you’re using, standard or widescreen.
• Use the / (cursor up/down) buttons to
choose a language, then press ENTER.
Let's Get Started Menu
Select the display language
using the cursor keys on the remote
FM/AM
DVD
TUNER
L1/L2
TV
LINE
FRONT
SURROUND
OPEN CLOSE
0
8
1
4
3
Choose one then press Enter
¡
4
7
Nederlands
All other models:
RETURN
DVD MENU
TUNE+
ST–
ST+
ENTER
MUTE
Italiano
English
français
Deutsch
Italiano
Español
STANDBY/ON
CD
Français
After that you can set up the surround sound
for your room, and set the clock so that you can
use the timer features.
2 Follow the directions that appear on
the on-screen display.
European model:
Deutsch
Switching on and setting up
TUNE–
• After you’re finished reading the welcome
screen, press ENTER to move on.
SOUND
Welcome to Pioneer DVD!
Español
MASTER
VOLUME
Thank you for purchasing this Pioneer DVD player.
TV CONTROL
CH
INPUT
VOL
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
1 Press STANDBY/ON (on the remote or
the front panel) to switch the system on.
Also make sure that your TV is switched on and
that the video input is set to this system (for
example, if you connected this system to the
VIDEO 1 input on your TV, switch your TV to
VIDEO 1).
Next
13
En
Getting_started.fm 14 ページ 2004年1月14日 水曜日 午後4時43分
03
Getting started
3 Use the / (cursor left/right) buttons
to select either ‘Wide screen (16:9)’ or
‘Standard size screen (4:3)’ according to the
kind of TV you have, then press ENTER.
See also Screen sizes and disc formats on
page 68 if you’re not sure which one to choose.
Setting the clock
Setting the clock allows you to use the timer
features.
RETURN
DVD MENU
TUNE+
ST–
ST+
SB
BASS MODE DIALOGUE VIRTUAL
CH LEVEL
ADVANCED
SURROUND SURROUND
ADVANCED VIRTUAL
SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
ENTER
/
SOUND
MASTER
VOLUME
What kind of TV do you have?
Use the
TUNE–
MUTE
Let's Get Started Menu
cursor buttons
TV CONTROL
to choose, then press [ENTER]
CH
Wide screen (16:9)
4
Standard size screen (4:3)
1
Press ENTER again to finish setting up.
INPUT
VOL
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
Press TIMER/CLOCK.
• If you are adjusting the clock, rather then
setting it for the first time, press TIMER/
CLOCK again.
2 If ‘Clock ADJ?’ isn’t already showing in
the display, press or (cursor left or
right) until you see it.
Let's Get Started Menu
Setup complete
If you're finished setting up,
3
choose [Complete],
Press ENTER.
to start again choose [Back]
4 Use the / (cursor up/down) buttons
to set the hour.
Complete
Back
5
• Use the (cursor right) button to select
Back then press ENTER if you want to go
back and change the setting you just
made.
Tip
• You can also use the function buttons
(DVD/CD, TUNER, etc.) or the OPEN/
CLOSE button to switch the system on
from standby.
Press ENTER.
6 Use the / (cursor up/down) buttons
to set the minute.
7 Press ENTER to confirm.
The display flashes to indicate the clock is set.
Tip
• Press TIMER/CLOCK anytime to display
the clock.
Note
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
14
En
XV-DV323.book 15 ページ 2004年1月13日 火曜日 午後7時57分
Getting started
03
Depending on the size and characteristics of
your room, you can choose to place your
speakers in one of two ways using this system:
Front left
Center
Front right
Surround
right
Press ENTER.
Front
right
Subwoofer
5 Use the / (cursor up/down) buttons
to select a seating position setting, then
press ENTER.
Choose one of the following depending on
where your main listening position is:
• Fwd – If you are nearer to the front
speakers than the surround speakers
• Mid – If you are equal distance from the
front and surround speakers
Español
Surround
right
• M – Average room
• L – Larger than average room
Nederlands
Center
• S – Smaller than average room
Italiano
• Front surround 3-spot setup – This setup
is ideal when rear surround speaker
placement isn't possible or you want to
avoid running long speaker cables in your
listening area. Use this setup together with
the Front Surround modes to take
advantage of wall and ceiling reflections
for a very realistic surround effect.
Surround
left
3
Press ROOM SETUP.
• If you have previously set up the room type
and seating position, the display will show
the current room settings.
Français
Listening position
Front
left
2
4 Use the / (cursor up/down) buttons
to select a room type then press ENTER.
Choose one of the following depending on your
room size:
Subwoofer
Surround
left
1 If the system isn’t already on, press
STANDBY/ON to switch it on.
Deutsch
• Standard surround 5-spot setup – This is
a standard multichannel surround sound
speaker setup for optimal 5.1 channel
home theatre sound.
For a more detailed surround sound setup, see
Using the System Setup menu on page 44.
English
Home theater sound setup
• Back – If you are nearer to the surround
speakers than the front speakers
Listening position
See About the listening modes on page 23 for
more on using the different listening modes
with each speaker setup.
Using the Room Setup
After you have set up your speakers to your
liking (see Home theater sound setup above),
make sure you calibrate your system for
surround sound. This is a quick and easy way
to get good surround sound for your room.
Note
• The Room Setup automatically sets up
both channel level and channel delay. If
you have already set the channel levels
manually (see Setting the channel levels on
page 46), you will see Room Set? in the
display when you first press the ROOM
SETUP button.
15
En
XV-DV323.book 16 ページ 2004年1月13日 火曜日 午後7時57分
03
Getting started
Setting up the remote to
control your TV
You can set up the supplied remote to control
your TV using the TV CONTROL buttons.
1
Switch on your TV.
2 Find the name of the manufacturer of
your TV in the Preset code list on page 70.
Next to each manufacturer is one or more
three digit codes. These tell the remote what
kind of TV you have.
If the name of the manufacturer of your TV
does not appear in the table, you won’t be able
to set up this remote to control your TV.
3 Point the remote at your TV, hold down
the CLR button, then enter the three digit
code for your TV.
The remote transmits an on/off signal to the TV.
If you’ve entered the correct code, your TV
should switch off.
If your TV doesn’t turn off, repeat the procedure
using the next code in the list until your TV
switches off successfully. Once set, you can
use the individual TV controls shown below.
Note
• The default setting is for a Pioneer TV.
Using the on-screen displays
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
system, using some of the playback features,
such as program play, and when making more
advanced settings for audio and video.
All the screens are navigated in basically the
same way, using the cursor buttons (, , ,
) to change the highlighted item and
pressing ENTER to select it.
Important
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
1
4
MASTER
VOLUME
3
7
¡
4
RETURN
DVD MENU
TV CONTROL
ENTER
CH
INPUT
VOL
MUTE
BASS MODE DIALOGUE
SURROUND ADVANCED
PROGRAM
16
En
REPEAT
CH LEVEL
VIRTUAL SB
SOUND
BASS MODE DIALOGUE
SURROUND ADVANCED
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
MASTER
VOLUME
RANDOM
Button
What it does
Switches your TV on or into
standby.
Button
What it does
CH +/–
Changes the TV channel.
HOME
MENU
Displays/exits the on-screen
display
VOL +/–
Adjusts the volume.
INPUT
Switches the TV’s input
between the built in TV tuner
and an external video source.
Changes the highlighted menu
item
XV-DV323.book 17 ページ 2004年1月13日 火曜日 午後7時57分
Getting started
ENTER
Selects the highlighted menu
item (both ENTER buttons work
in exactly the same way)
RETURN
Returns to the main menu
without saving changes
Tip
Playing discs
2 Press OPEN/CLOSE to open the disc
tray.
5 Use the MASTER VOLUME – / + button
(or the front panel VOLUME buttons) to
adjust the volume.
Basic playback controls
The following table shows the basic controls on
the remote for playing discs. You can find other
playback features in the chapter 5.
FRONT
SURROUND
OPEN CLOSE
0
8
1
4
3
4
RETURN
TUNE+
ST–
ST+
ENTER
MUTE
TUNE–
PROGRAM
AUDIO
REPEAT
SUBTITLE
ZOOM
TOP MENU
¡
7
DVD MENU
BASS MODE DIALOGUE
SURROUND ADVANCED
SOUND
CH LEVEL
VIRTUAL SB
RANDOM
ANGLE
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
Español
3 Load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you’re
loading a double-sided DVD disc, load it with
the side you want to play face down).
• See also Options on page 51 if the disc
contains both WMA/MP3 audio files and
JPEG picture files.
Nederlands
1 If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD/Super VCD,
also turn on your TV and make sure that it is set
to the correct video input.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing JPEG
discs on page 38 for more on playing these
discs.
Italiano
The basic playback controls for playing DVD,
CD, Video CD/Super VCD and WMA/MP3 discs
are covered here. Further functions are
detailed in chapter 5.
If you’re playing an WMA/MP3 disc, it may take
a few seconds before playback starts,
depending on the complexity of the file
structure on the disc.
Français
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
4 Press (play) to start playback.
If you’re playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus on page 19 and Video CD/Super VCD
PBC menus on page 20 for how to navigate
these.
Deutsch
What it does
English
Button
03
ROOM SETUP
17
En
XV-DV323.book 18 ページ 2004年1月13日 火曜日 午後7時57分
03
Getting started
Button
What it does
Button
What it does
Starts playback.
DVD and Video CD: If the display
shows Resume or Last Mem
playback starts from the resume
or last memory point (see also
Resume and Last Memory
below.)
Numbers
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
DVD and Video CD: The display
shows Resume. Press again if
you want to cancel the resume
function. (See also Resume and
Last Memory below.)
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/Super VCD/WMA/
MP3) after a few seconds (or
after pressing ENTER).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track after a few
seconds (or after pressing
ENTER).
En
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CDR/RW discs.
Press to start fast reverse
scanning. Press (play) to
resume normal playback.
Press to start fast forward
scanning. Press (play) to
resume normal playback.
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
The OPEN/CLOSE, DVD/CD, FM/AM
and (stop) buttons work the same way as the
remote control equivalents.
Skips to the next track or
chapter.
Resume and Last Memory
FOLDER +/– Skips to the next/previous folder
when playing an WMA/MP3 disc.
18
Note
Using the front panel controls
When you stop playback of a DVD or Video CD
disc, Resume shows in the display indicating
that you can resume playback from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time, the
display shows Last Mem and you can resume
playback (this works for up to five discs).
If you want to clear the resume/last memory
point, press (stop) while Resume or Last
Mem is displayed.
Getting_started.fm 19 ページ 2004年1月15日 木曜日 午後3時19分
Getting started
• When a Video CD is loaded, the Resume
point is lost if the system is switched off, or
switched to a function other than DVD
(CD).
• The Last Memory function doesn’t work
with VR format DVD-RW discs.
• After I load a DVD disc, it ejects
automatically after a few seconds!
• Why won’t the disc I loaded play?
Sometimes DVD-Video menus are displayed
automatically when you start playback; others
only appear when you press DVD MENU or
TOP MENU.
1
4
3
7
4
RETURN
DVD MENU
ENTER
MUTE
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM. See
Disc / content format playback compatibility
on page 6 for more on disc compatibility.
¡
SOUND
CH LEVEL
BASS MODE DIALOGUE
SURROUND ADVANCED VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
ZOOM
TOP MENU
RANDOM
ANGLE
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
Español
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See Using and
taking care of discs on page 61 for
information on cleaning discs.
Many DVD-Video discs contain menus from
which you can select what you want to watch.
They may give access to additional features,
such as subtitle and audio language selection,
or special features such as slideshows. See the
disc packaging for details.
Nederlands
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the disc
and look for signs of damage. See also
Using and taking care of discs on page 61.
DVD-Video disc menus
Italiano
Most likely, the disc is the wrong region for
your system. The region number should be
printed on the disc; check it against the
region number of the system (which you
can find on the rear panel). See also DVD
Video regions on page 61.
Some discs override the display
preferences of the system, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letterbox format.
This is not a malfunction.
Français
FAQ
• I have a standard (4:3) TV and set the system
to show widescreen DVDs in pan & scan
format, so why do I still get black bars top
and bottom with some discs?
Deutsch
• For the Last Memory function to work, you
must press (stop) to stop playback
before opening the disc tray.
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom of
the screen. This is not a malfunction.
English
Note
03
ROOM SETUP
MASTER
VOLUME
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
19
En
Getting_started.fm 20 ページ 2004年1月15日 木曜日 午後3時19分
03
Getting started
Button
What it does
TOP MENU Displays the ‘top menu’ of a DVD
disc—this varies with the disc.
Displays the PBC menu.
Numbers
Displays a DVD disc menu—this
varies with the disc and may be
the same as the ‘top menu’.
Selects a numbered menu
option.
Displays the previous menu page
(if there is one).
Moves the cursor around the
screen.
Displays the next menu page (if
there is one).
ENTER
Selects the current menu option.
ENTER
RETURN
Returns to the previously
displayed menu screen.
Press to select highlighted menu
option.
Numbers
Highlights a numbered menu
option (some discs only). Press
ENTER to select.
Some Video CD/Super VCDs have menus from
which you can choose what you want to watch.
These are called PBC (Playback control)
menus.
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
pressing (stop) then starting playback using
a number button to select a track, rather than
(play) (or on the front panel).
FRONT
SURROUND
OPEN CLOSE
0
8
1
4
3
¡
4
7
RETURN
DVD MENU
BASS MODE DIALOGUE
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
SUBTITLE
CH LEVEL
VIRTUAL SB
ST–
ST+
MUTE
TOP MENU
1
2
3
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
0
SUB
MASTER
VOLUME
STANDBY/ON
TV CONTROL
CD
FM/AM
DVD
TUNER
L1/L2
TV
LINE
CH
FRONT
SURROUND
1
4
3
VOL
0
¡
4
7
RETURN
DVD MENU
TUNE+
ST+
ENTER
MUTE
INPUT
OPEN CLOSE
8
HOME
MENU
SYSTEM
SETUP
MAIN
SOUND
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen. For more
on using the radio, see More tuner features:
RDS on page 40.
ST–
ZOOM
CLR
ENTER
TUNE–
Listening to the radio
RANDOM
ANGLE
TUNE+
20
What it does
RETURN
DVD
MENU
Video CD/Super VCD PBC menus
En
Button
TUNE–
SOUND
BASS MODE DIALOGUE
SURROUND ADVANCED
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
MASTER
VOLUME
FOLDER+
ENTER
ROOM SETUP
1 If the system isn’t already on, press
STANDBY/ON to switch on.
XV-DV323.book 21 ページ 2004年1月13日 火曜日 午後7時57分
Getting started
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
TV CONTROL
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
Tune to an FM radio station.
2
Press SYSTEM SETUP.
3 Use the / (cursor left/right) buttons
to choose ‘FM Mode?’ then press ENTER.
4 Use the / (cursor up/down) buttons
to select ‘FM Mono’ then press ENTER.
The mono indicator ( ) lights when the tuner
is in mono reception mode.
L1/L2
TV
LINE
4
3
¡
4
7
RETURN
DVD MENU
TUNE+
ST–
ST+
ENTER
MUTE
INPUT
VOL
0
8
1
CH
OPEN CLOSE
TUNE–
SOUND
BASS MODE DIALOGUE
SURROUND ADVANCED
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
MASTER
VOLUME
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2
Español
1
TUNER
Nederlands
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
FM/AM
Italiano
Improving poor FM reception
CD
DVD
FRONT
SURROUND
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to search for other
stations.
• High-speed tuning: Press and hold TUNE
+/– until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
MASTER
VOLUME
STANDBY/ON
Français
3 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
Deutsch
• If you’re using the front panel controls, the
TUNER button switches between FM, AM
and station presets (see Memorizing
stations below).
Select Auto above to switch back to autostereo mode (the stereo indicator ( ) lights
when receiving a stereo broadcast).
English
2 Press TUNER to switch to the tuner,
then press repeatedly to select the AM or
FM band.
The display shows the tuner band and
frequency.
03
Press SYSTEM SETUP.
3 Use the / (cursor left/right) buttons
to choose ‘St. Memory?’ then press ENTER.
4 Use the / (cursor up/down) buttons
to select the station preset you want.
There are 30 preset locations; each can store
one station preset.
5
Press ENTER to save the station preset.
21
En
XV-DV323.book 22 ページ 2004年1月13日 火曜日 午後7時57分
03
Getting started
Note
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Listening to station presets
1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a
station preset.
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components on page 53.
STANDBY/ON
CD
FM/AM
DVD
TUNER
FRONT
SURROUND
1
LINE
OPEN CLOSE
8
4
L1/L2
TV
3
7
0
¡
4
1 If the system isn’t already on, press STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• If you’re using the remote control, press TV
to select the TV IN input, or use the LINE
(L1/L2) button to select the LINE 1 or LINE
2 input.
3 If necessary, start playback of the
external source.
22
En
XV-DV323.book 23 ページ 2004年1月13日 火曜日 午後7時57分
Listening to your system
04
English
Chapter 4
Listening to your system
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
BASS MODE DIALOGUE
SURROUND ADVANCED
Make sure you have completed Using the
Room Setup on page 15. For a more detailed
surround sound setup, see Using the System
Setup menu on page 44.
• Certain features explained in this section
may not be possible depending on the
source (for example, 88.2 / 96 kHz sources),
or a conflicting system setting. See Error
Messages on page 67 for more on this.
RANDOM
ANGLE
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
• Press SURROUND to select the ‘Auto’
listening mode.
If the source is Dolby Digital or DTS, the
2 DIGITAL or DTS indicator on the front panel
lights.
Note
Español
Note
TOP MENU
Nederlands
• Front surround 3-spot setup – See Using
Front Surround on page 25 for the options
available with this speaker setup.
REPEAT
SUBTITLE
ZOOM
CH LEVEL
VIRTUAL SB
Italiano
• Standard surround 5-spot setup – Use
the Standard (Listening in surround sound
on page 24) and Advanced (Using the
Advanced Surround effects on page 25)
surround listening modes with this setup.
PROGRAM
AUDIO
Français
Auto listening mode
As explained in Home theater sound setup on
page 15, there are two basic surround speaker
setup options available. Of course you can
select any of the listening modes regardless of
how you place your speakers, but you will
achieve the best surround effect by using the
listening modes in conjunction with your
speaker setup:
Deutsch
About the listening modes
• Any previously active Dolby Pro Logic or
Advanced Surround mode is canceled
when Auto listening mode is selected.
23
En
XV-DV323.book 24 ページ 2004年1月13日 火曜日 午後7時57分
04
Listening to your system
Listening in surround sound
Note
You can listen to any source—stereo or
multichannel, analog or digital—in surround
sound. Surround sound is generated from
stereo sources using one of the Dolby Pro
Logic decoding modes.
BASS MODE DIALOGUE
SURROUND ADVANCED
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
CLR
0
SUB
• Dolby Digital / DTS sources that use only
the center channel cannot be played back
in surround sound.
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
MAIN
• When listening in Dolby Digital / DTS
mode, two-channel material will
automatically be played in surround sound
using Dolby Pro Logic II decoding.
FOLDER+
ENTER
ROOM SETUP
• Press SURROUND repeatedly to select a
listening mode (or press SURROUND then
use the / (cursor up/down) buttons).
The listening mode choices that appear in the
display will vary according to the type of source
that’s playing.
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three further parameters you
can adjust: Center Width, Dimension, and
Panorama.
1 With Dolby Pro Logic II Music mode
active, press SOUND.
2 Use the / (cursor left/right) buttons
to select ‘C Width’, ‘Dimen.’ or ‘Pnrm.’
• C Width (Center Width): Makes the center
channel wider (higher settings) or
narrower (lower settings)
• Auto – Auto listening mode (see above)
• Dimen. (Dimension): Makes the sound
more distant (minus settings), or more
forward (positive settings)
• Dolby Digital / DTS – Dolby Digital or DTS
decoding (depending on the source). For a
multichannel source, this will be the same
as Auto.
• Pro Logic – 4.1 channel surround sound
for use with any two-channel source
• PL II Movie – Pro Logic II 5.1 channel
surround sound, especially suited to movie
sources, for use with any two-channel
source
• PL II Music – Pro Logic II 5.1 channel
surround sound, especially suited to music
sources, for use with any two-channel
source (see also Dolby Pro Logic II Music
settings below)
• Stereo – See Listening in stereo below
24
En
• Pnrm. (Panorama): Creates more spacious
surround sound
3 Use the / (cursor up/down) buttons
to adjust the setting.
Center Width is adjustable between 0 and 7;
Dimension between –3 and +3. Panorama is
On or Off.
4
Press ENTER to confirm.
XV-DV323.book 25 ページ 2004年1月13日 火曜日 午後7時57分
Listening to your system
For more options, see Adjusting the Advanced
and Front Surround effect level below.
CH LEVEL
VIRTUAL SB
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
SUB
STANDBY/ON
CD
FM/AM
DVD
TUNER
FRONT
SURROUND
LINE
OPEN CLOSE
8
1
L1/L2
TV
3
Italiano
PROGRAM
AUDIO
MAIN
For more options, see Adjusting the Advanced
and Front Surround effect level below.
Français
BASS MODE
SURROUND ADVANCED
The Front Surround modes are effective when
you are using the Front surround 3-spot
speaker setup as described in Home theater
sound setup on page 15. The surround
speakers should be placed on top of the front
speakers and oriented either towards the walls,
or straight ahead, depending on which mode
you are using (see below).
Deutsch
The Advanced Surround effects can be used
with any multichannel or stereo source for a
variety of additional surround sound
effects.The 5-spot setup described in Home
theater sound setup on page 15 should be used
with these effects.
Using Front Surround
English
Using the Advanced Surround
effects
04
0
¡
ROOM SETUP
4
• Adv. Movie – Gives a movie theater-type
sound
• Expanded – Creates an extra wide
surround field
• TV Surr. – Designed for mono or stereo TV
broadcasts and other sources
• Sports – Designed for sports and other
programs based on commentary
• Game – Creates surround sound from
video game sources
• Press FRONT SURROUND to select an
Front Surround mode (or press FRONT
SURROUND then use the / buttons).
Press repeatedly to select from:
• Frt. Movie – The Front Surround Movie
mode emphasizes directionality, giving you
a realistic movie theater-type sound.
Español
• Adv. Music – Gives a concert hall-type
sound
4
Nederlands
• Press ADVANCED to select an Advanced
Surround mode (or press ADVANCED then
use the / buttons).
Press repeatedly to select from:
7
• Frt. Music – The Front Surround Music
mode provides greater breadth and depth
to music sources, enveloping you with a
concert hall-type sound.
• ExtraPower – The Extra Power mode gives
additional energy and depth to a stereo
source by using the surround speakers in
addition to the front speakers.
• 5ch Stereo – Designed to give powerful
surround sound to stereo music sources
25
En
Home_theater.fm 26 ページ 2004年1月20日 火曜日 午後4時24分
04
Listening to your system
If you have selected Frt. Movie or Frt. Music,
you will achieve best results by turning each
surround speaker about 50º towards the
closest wall. With ExtraPower, orient the
surround speakers in the same direction as the
front speakers (towards the listening position).
Listening in stereo
You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwoofer.
BASS MODE DIALOGUE
SURROUND ADVANCED
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
50º
Frt. Movie / Frt. Music
Extra Power
• When turning, you will feel the surround
speaker snap correctly into place. Do not
force the speaker to turn past this point.
Adjusting the Advanced and Front
Surround effect level
You can emphasize or reduce the effect of the
Advanced and Front Surround modes as you
like. You can set the effect level for all modes
independently.
En
MAIN
SUB
ROOM SETUP
• Press SURROUND repeatedly until
‘Stereo’ shows in the display.
Any active Advanced or Front Surround mode
is canceled.
Listening with headphones
1 With one of the Advanced or Front
Surround modes active, press SOUND.
When headphones are connected, only the
Stereo (default) and Phones Surround (virtual
surround sound for headphones) modes are
available.
2 Use the / (cursor left/right) buttons
to select ‘Effect’.
When you disconnect them it reverts to the
previous mode.
3 Use the / (cursor up/down) buttons
to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
• With headphones connected, press
ADVANCED or FRONT SURROUND to select
‘Phones Surround’ or SURROUND to select
‘Stereo’.
4
26
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
Press ENTER to confirm.
Home_theater.fm 27 ページ 2004年1月15日 木曜日 午後3時21分
Listening to your system
• Default setting: Dialog Off (European
model) / Dialog Mid (All other models)
BASS MODE DIALOGUE VIRTUAL SB
ADVANCED
SURROUND ADVANCED VIRTUAL
SB
BASS MODE DIALOGUE
CH LEVEL
SURROUND SURROUND VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
TOP MENU
HOME
MENU
SR+
FOLDER–
FOLDER+
1
2
3
CLR
0
ENTER
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
MAIN
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
• Dialog Mid – Moderate dialog
enhancement
• Dialog Max – Strong dialog enhancement
• Default setting: Vir. SB Off
The Virtual Surround Back feature can be used
when listening in surround sound (using the 5spot setup described in Home theater sound
setup on page 15) to simulate an added
Note
• You can’t use Virtual Surround Back when
using the Stereo listening mode (or Auto
with stereo sources).
• If you are using the The Front surround 3spot setup (see Home theater sound setup
on page 15), switch the Virtual Surround
Back feature off.
• If there is no surround channel, Virtual
Surround Back has no effect.
Español
Listening with a virtual
surround back speaker
• Press VIRTUAL SB repeatedly to switch
between ‘Vir. SB On’ and ‘Vir. SB Off’.
Nederlands
• Dialog Off – No dialog enhancement
ROOM SETUP
Italiano
• Press DIALOGUE to select the amount
dialog enhancement.
Press repeatedly to select from:
SUB
Français
ZOOM
Deutsch
The Dialogue Enhancement feature is
designed to make the dialog stand out from
other background sounds in a TV or movie
soundtrack.
surround back channel. In a real theater the
surround back speaker would be directly
behind you, creating more cohesive and
realistic surround sound.
English
Enhancing dialogue
04
Using Quiet and Midnight
listening modes
• Default setting: Off
The Quiet listening feature reduces excessive
bass or treble in a sound source. You can use
this feature if the music is a little bit harsh and
you would like a smoother sound.
27
En
XV-DV323.book 28 ページ 2004年1月13日 火曜日 午後7時57分
04
Listening to your system
The Midnight listening feature allows you to
hear effective surround sound of movies at low
volume levels. The effect automatically adjusts
according to the volume at which you’re
listening.
BASS MODE DIALOGUE
SURROUND ADVANCED
4
Press ENTER to confirm.
Boosting the bass level
There are three bass modes you can use to
enhance the bass in a source.
CH LEVEL
VIRTUAL SB
BASS MODE DIALOGUE
AUTO
ADVANCED
PROGRAM
AUDIO
ZOOM
REPEAT
SUBTITLE
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
TIMER/
CLOCK
7
8
9
DIMMER
DISPLAY
SR+
FOLDER–
FOLDER+
7
8
9
CLR
0
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ENTER
ROOM SETUP
MAIN
• Press QUIET/MIDNIGHT repeatedly to
switch between ‘Quiet’, ‘Midnight’ and
‘Off’.
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone. Bass and treble adjustment is not
possible when the Quiet or Midnight modes
are active.
RETURN
DVD MENU
TUNE+
ST–
ST+
ENTER
MUTE
TUNE–
SOUND
MASTER
VOLUME
1
Press SOUND.
2 Use the / (cursor left/right) buttons
to select ‘Bass’ or ‘Treble’.
3 Use the / (cursor up/down) buttons
to adjust the sound.
The bass and treble can be adjusted from –3 to
+3.
28
En
CH LEVEL
VIRTUAL SB
RANDOM
ANGLE
SUB
ROOM SETUP
• Press BASS MODE repeatedly to choose
an option that fits the source you’re
listening to.
• Music – Can be used with music to give a
deeper bass sound
• Cinema – Good for action movies or
movies with lots of sound effects
• P. Bass – Can be used with music sources
to bring the beat of the music (or
soundtrack) to the forefront
• Off – Switch off the bass boost if it causes
excessive bass (i.e. it sounds ‘boomy) in
the source
XV-DV323.book 29 ページ 2004年1月13日 火曜日 午後7時57分
Playing discs
05
English
Chapter 5
Playing discs
• Some DVDs restrict the use of some
functions (random or repeat, for example)
in some or all parts of the disc. This is not a
malfunction.
Remember
Scanning discs
1 During playback, press or to
start scanning.
• There is no sound while scanning DVDs
and Video CD/Super VCDs, and no
subtitles while scanning DVDs.
2 Press repeatedly to increase the
scanning speed.
• The scanning speed is shown on-screen.
3
During playback, press (pause).
2 Press and hold / or / until
slow motion playback starts.
• The slow motion speed is shown onscreen.
• There is no sound during slow motion
playback.
3 Press repeatedly to change the slow
motion speed.
4 To resume normal playback, press (play).
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
Español
You can fast-scan discs forward or backward at
various different speeds.
1
Nederlands
• To access functions printed in green on the
remote, move the slider switch from MAIN
to SUB.
You can play DVDs and Video CD/Super VCDs
at four different forward slow motion speeds.
DVD discs can also be played at two reverse
speeds.
Italiano
• Many features are not available when
using unfinalized CD-R/RW discs.
Playing in slow motion
Français
• When playing Video CD/Super VCDs, some
of the functions are not available during
PBC playback. If you want to use them,
start the disc playing using a number
button to select a track.
Deutsch
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD disc.
Note
Frame advance/frame reverse
You can advance or back up DVD discs frameby-frame. With Video CD/Super VCDs you can
only use frame advance.
To resume playback, press (play).
• When scanning a Video CD/Super VCD or
a WMA/MP3 track, playback automatically
resumes at the end or beginning of the
track.
29
En
XV-DV323.book 30 ページ 2004年1月13日 火曜日 午後7時57分
05
Playing discs
1
During playback, press (pause).
2 Press / or / to reverse or
advance a frame at a time.
3 To resume normal playback, press (play).
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
Using the Disc Navigator to
browse the contents of a disc
Use the Disc Navigator to browse through the
contents of a disc to find the part you want to
play. You can use the Disc Navigator when a
disc is playing or stopped (a disc must be
loaded).
• It’s not possible to switch between Original and Playlist during playback.
• Not all VR format DVD-RW discs have a
Playlist.
Disc Navigator
DVD-RW
Original
Play List
Title(1-03)
01. 3/31 FIRST LEAGUE
02. 4/28 SECOND LEAGUE
03. 4/29 FINAL ROUND
The screen for CDs and Video CD/Super VCDs
shows a list of tracks.
Disc Navigator
Track 1-10
CD
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
1 Press HOME MENU and select ‘Disc
Navigator’ from the on-screen display.
Disc Navigator
• With most discs, you can also press DVD
MENU to go directly to the Disc Navigator.
2 Select what you want to play.
Depending on the type of disc you have loaded,
the Disc Navigator looks slightly different.
The screen for DVD discs shows the titles on
the left and the chapters on the right. Select a
title, or a chapter within a title.
The screen for an WMA/MP3 disc shows the
folder names on the left and the track names
on the right (note that if there are more than 16
folders or names that contain accented or nonroman characters, tracks and folders may
show up with generic names – F_033, T_035,
etc.).
Select a folder, or a track within a folder.
Disc Navigator
Disc Navigator
DVD
Title 1-10
Chapter 1-3
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
WMA/MP3
Folder 1-17
Track 1-10
001. ACP
002. Nth Degree
003. Pfeuti
004. Live
005. Glitch music
006. CodHead
007. Thermo
008. Missing Man
001. Gravity deluxe
002. Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
007. Outernational
008. Vacuum tube
Playback starts after you press ENTER.
For a VR (Video Recording) mode DVD-RW disc
select between the Playlist and Original areas
of the disc, or a title. Press (cursor right) to
preview the title.
30
En
XV-DV323.book 31 ページ 2004年1月13日 火曜日 午後7時57分
Playing discs
05
• Another way to find a particular place on a
disc is to use one of the search modes. See
Searching a disc on page 34.
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD) that form a loop which
is played over and over.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘Repeat’ from the list of functions
on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Title Repeat
Chapter Repeat
Repeat Off
Italiano
2 Select ‘A-B Repeat’ from the list of
functions on the left.
1 During playback, press HOME MENU
and select ‘Play Mode’.
Français
• You can’t use A-B Repeat with Super VCD
or WMA/MP3 discs.
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list on
page 33). However, note that you can’t use
repeat and random play at the same time.
Deutsch
Looping a section of a disc
English
Using repeat play
Tip
Play Mode
A(Start Point)
B(End Point)
Off
4 Press ENTER on ‘B(End Point)’ to set the
loop end point.
After pressing ENTER, playback jumps back to
the start point and plays the loop.
• For DVD discs, select Title Repeat or
Chapter Repeat (or Repeat Off).
Español
3 Press ENTER on ‘A(Start Point)’ to set
the loop start point.
3 Select a repeat play option.
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
Nederlands
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Title Repeat
Chapter Repeat
Repeat Off
• The minimum loop time is 2 seconds.
5 To resume normal playback, select ‘Off’
from the menu.
• For CDs and Video CD/Super VCDs, select
Disc Repeat or Track Repeat (or Repeat
Off).
• For WMA/MP3 discs, select Disc Repeat,
Folder Repeat or Track Repeat (or
Repeat Off).
31
En
XV-DV323.book 32 ページ 2004年1月13日 火曜日 午後7時57分
05
Playing discs
3
Tip
• You can also use the REPEAT button on the
remote to select a repeat play option. The
repeat mode is indicated in the front panel
display and on-screen. The repeat modes
available are the same as when choosing
from the Play Mode menu.
Select a random play option.
• For DVD discs, select Random Title or
Random Chapter, (or Random Off).
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
• If you’ve created a program list, Program
Repeat is also available.
• During playback, you can cancel repeat
play by pressing CLR.
Using random play
Use this function to play titles or chapters
(DVD-Video) or tracks (CD, Video CD/Super
VCD and WMA/MP3 discs) in a random order.
You can set the random play option when a
disc is playing or stopped. However, you can't
use random play together with program or
repeat play.
• You can’t use random play with VR format
DVD-RW discs, or while a DVD disc menu
is being displayed.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘Random’ from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Random Title
Random Chapter
Random Off
Random Title
Random Chapter
Random Off
• For CDs and Video CD/Super VCDs, select
On or Off to switch random play on or off.
• For WMA/MP3 discs, select Random All
(all folders) or Random Track (current
folder only), (or Random Off).
Tip
• Use the following controls during random
play:
Button
What it does
Stop and cancel random play.
Selects another track/chapter at
random from those remaining.
Returns to the beginning of the
current track/chapter. You can't
go back further than this.
• You can also use the RANDOM button on
the remote to select a random play mode.
The random mode is indicated in the front
panel display and on-screen. The random
modes available are the same as when
choosing from the Play Mode menu.
Press ENTER to start random play.
• To cancel random playback without stopping playback, press CLR. The disc will play
to the end, then stop.
32
En
XV-DV323.book 33 ページ 2004年1月13日 火曜日 午後7時57分
Playing discs
05
This feature lets you program the play order of
titles/chapters/folders/tracks on a disc.
Using the OSD
1 During playback, press HOME MENU
and select ‘Play Mode’.
Play Mode
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
• To delete a step, highlight it and press CLR.
6 To play the program list, press (play).
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off the
player.
Italiano
A-B Repeat
Repeat
Random
Program
Search Mode
• You can insert steps into the middle of a
program list by just highlighting the
position where you want the new step to
appear and entering a title/chapter/folder/
track number.
Français
2 Select ‘Program’ from the list of
functions on the left.
5 Repeat step 4 to build up a program list.
A program list can contain up to 24 titles/chapters/folders/tracks.
Deutsch
• You can’t use Program play with VR format
DVD-RW discs, or while a DVD disc menu
is being displayed.
After pressing ENTER to select the title/
chapter/folder/track, the step number
automatically moves down one.
English
Creating a program list
Off
Tip
Button
What it does
HOME
MENU
Save the program list and exit
the program edit screen without
starting playback.
Skip to the next step in the
program list.
CLR
Switch off program play. Press
while stopped to erase the
program list.
RETURN
Exit the program edit screen
without saving any changes.
Español
4 Use the cursor buttons and ENTER to
select a title, chapter, folder or track for the
current step in the program list.
For a DVD disc, you can add a title or a chapter
to the program list.
• Use the following controls during program
play:
Nederlands
3 Select ‘Create/Edit’ from the list of
program options.
Program
Program Step
Title 1~38
Chapter 1~4
01. 01
02.
03.
04.
05.
06.
07.
08.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
• For a CD or Video CD/Super VCD, select a
track to add to the program list.
Other functions available from the
program menu
• For an WMA/MP3 disc, you can add a
whole folder, or a track within a folder to
the program list.
There are a number of other options in the
program menu in addition to Create/Edit.
33
En
XV-DV323.book 34 ページ 2004年1月13日 火曜日 午後7時57分
05
Playing discs
• Playback Stop – Turns off program play,
but does not erase the program list
4 To play the program list, press (play).
Program play remains active until you press (stop), clear the playlist (see below), eject the
disc or switch off the player.
• Program Delete – Erases the program list
and turns off program play
Clearing the program list
• Playback Start – Starts playback of a
saved program list
• Program Memory (DVD only) – Select On
to save the program list for the disc loaded.
(Select Off to cancel the program memory
for the disc loaded)
You must clear the program list to program a
new one.
1
If a disc is playing, press (stop).
2
Press CLR.
Using the front panel display
• Program lists are saved for the DVD disc
loaded. When you load a disc with a saved
program list, program play is automatically
turned on.
1 Press PROGRAM.
You’re prompted to enter a track or folder for
the first step in the program list.
• You can save program lists for up to 24
discs. After that, the oldest one is replaced
with the new one saved.
P -00
0 00
2 Use / (cursor up/down) to select a
track or a folder, then press ENTER.
• For WMA/MP3 discs only: To select an
individual track within a folder, use the /
(cursor up/down) buttons to select the
folder, then press , then use /
(cursor up/down) to select a track. Press
ENTER.
P -01
5 37
Wait for the display to prompt you after
completing each selection. If you make a
mistake, press CLR to delete the last (most
recently) programmed track.
3 Repeat step 2 to build up a program list.
A program list can contain up to 24 steps.
34
En
Note
Even though the OSD is available for CDs and
WMA/MP3 discs, the front panel display
provides enough information to make a
program list easily. If a disc is playing, stop it
first.
Searching a disc
You can search DVD discs by title or chapter
number, or by time. CD/Super VCDs can be
searched by track number, and Video CDs by
track number or time. WMA/MP3 discs can be
searched by folder or track number.
XV-DV323.book 35 ページ 2004年1月13日 火曜日 午後7時57分
Playing discs
05
Play Mode
3
Current / Total
Subtitle
1/ 2
Note
Title Search
Chapter Search
Time Search
Input Chapter
0 0 1
Press ENTER to start playback.
Switching the DVD audio
language
When playing a DVD disc recorded with dialog
in two or more languages, you can switch
audio language during playback.
• Press AUDIO repeatedly to select an
audio language option.
Audio
Current /Total
1/ 2
French
Español
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD) or track (Video CD) you
want playback to resume from. For
example, press 4, 5, 0, 0 to have playback
start from 45 minutes into the disc. For 1
hour, 20 minutes and 30 seconds, press 8,
0, 3, 0.
• To set subtitle preferences, see Language
settings on page 50.
Nederlands
Play Mode
• Some discs only allow you to change
subtitle language from the disc menu.
Press TOP MENU to access.
Italiano
4 Use the number buttons to enter a title,
chapter, folder or track number, or a time.
5
English
Title Search
Chapter Search
Time Search
Select a search mode.
• The disc must be playing in order to use
time search.
A-B Repeat
Repeat
Random
Program
Search Mode
• Press SUBTITLE repeatedly to select a
subtitle option.
Français
A-B Repeat
Repeat
Random
Program
Search Mode
Some DVD discs have subtitles in one or more
languages; the disc box will usually tell you
which subtitle languages are available. You
can switch subtitle language during playback.
Deutsch
2 Select ‘Search Mode’ from the list of
functions on the left.
The search options that appear depend on the
kind of disc loaded. The screen below shows
the DVD search options.
Switching subtitles
English
1 Press HOME MENU and select ‘Play
Mode’.
Dolby Digital 3/2.1CH
Note
• Some discs only allow you to change audio
language from the disc menu. Press TOP
MENU to access.
• To set audio language preferences, see
Language settings on page 50.
35
En
XV-DV323.book 36 ページ 2004年1月13日 火曜日 午後7時57分
05
Playing discs
Switching VR format DVD-RW
audio channel
When playing a VR format DVD-RW disc
recorded with dual-mono audio, you can
switch between the main, sub, and mixed
channels during playback.
1 Press AUDIO repeatedly to select an
audio channel option.
Audio
1L
Dolby Digital 1+1CH
Switching the Video CD/Super
VCD audio channel
When playing a Video CD/Super VCD, you can
switch between stereo, just the left channel or
just the right channel.
Some Super VCDs have two soundtracks. With
these discs you can switch between the two
soundtracks as well as individual channels in
each.
• Press AUDIO repeatedly to select an
audio channel option.
Audio
2 Use the cursor buttons to change the
zoomed area.
You can change the zoom factor and the
zoomed area freely during playback.
• If the navigation square at the top of the
screen disappears, press ZOOM again to
display it.
Note
• If you are displaying subtitles, these will
disappear when the screen is zoomed.
They will reappear when you return the
screen to normal.
Switching camera angles
Some DVD discs feature scenes shot from two
or more angles—check the disc box for details.
When a multi-angle scene is playing, a
icon appears on screen to let you know that
other angles are available (this can be
switched off if you prefer—see Display settings
on page 51).
• During playback (or when paused),
press ANGLE to switch angle.
Stereo
Displaying disc information
Zooming the screen
36
En
Using the zoom feature you can magnify a part
of the screen by a factor of 2 or 4, while
watching a DVD or Video CD/Super VCD or
playing a JPEG disc.
OSD disc information
1 During playback, use the ZOOM button
to select the zoom factor (Normal, 2x or
4x).
• Since DVD, Video CD/Super VCD and JPEG
pictures have a fixed resolution, picture
quality will deteriorate, especially at 4x
zoom. This is not a malfunction.
• To show/switch/hide the information
displayed, press DISPLAY repeatedly.
• When a disc is playing, the information
appears at the top of the screen.
Various track, chapter and title information
can be displayed on-screen while a disc is
playing.
XV-DV323.book 37 ページ 2004年1月13日 火曜日 午後7時57分
Playing discs
05
English
Front panel display information
Limited disc information also appears in the
front panel display. Press DISPLAY to change
the displayed information.
• DVD / DVD-RW displays
2
8 49
Title no.
Chapter no.
Elapsed title time
Title no.
Remaining title time
2
Title no.
Chapter no.
Remaining chapter
time
0 42
Français
2 TTL 1 0 7 0 0
2
Deutsch
2
Italiano
• CD and Video CD/Super VCD displays
1 16
Track no.
Elapsed track time
4
3 20
Track no.
Remaining track time
(CD / Video CD only)
53 15
Remaining disc time
(CD / Video CD only)
Disc
Nederlands
4
Español
• WMA / MP3 disc displays
2
0 35
Track no.
Elapsed track time
E V E R Y B OD
Track name
B E S T _O F _
Folder name
• JPEG disc displays
T I G E R_ 0 1
File name
Z OO _ T R I P
Folder name
37
En
XV-DV323.book 38 ページ 2004年1月13日 火曜日 午後7時57分
06
Viewing JPEG discs
Chapter 6
Viewing JPEG discs
Playing a JPEG slideshow
After loading a CD/CD-R/RW containing JPEG
pictures, press to start a slideshow from the
first folder/picture on the disc. The player
displays the pictures in each folder in alphabetical order.
Pictures are automatically adjusted so that
they fill as much of the screen as possible (if
the aspect ratio of the picture is different to
your TV screen you may notice black bars at the
sides, or at the top and bottom of the screen).
While the slideshow is running:
Button
What it does
Pauses the slideshow; press
again to restart.
Displays the previous picture.
Displays the next picture.
ANGLE
Pauses the slideshow and
rotates the currently displayed
picture 90º clockwise. Press (play) to restart slideshow.
ZOOM
Pauses the slideshow and zooms
the screen (see below). Press (play) to restart slideshow.
Note
• The , ANGLE and ZOOM buttons do not
work while the display shows LOADING.
• The time it takes for the player to load a file
increases with large file sizes.
• Up to 999 files are viewable on a disc. If
there are more files than this on a disc, only
the first 999 files are viewable.
• If you want to play the WMA/MP3 tracks on
a disc that also contains JPEG picture files,
you should first set the Photoviewer
option to Off. See Options on page 51.
Using the JPEG Disc Navigator
and Photo Browser
Use the JPEG Disc Navigator to find a
particular folder or picture by filename on the
disc in the play position; use the Photo
Browser to find a picture within a folder by
thumbnail image.
1 Press DVD MENU to display the Disc
Navigator screen.
Disc Navigator
Folder 1-2
JPEG
DVD
MENU
Displays the Disc Navigator
screen (see below).
FOLDER +/ Skips to the next/previous folder
FOLDER – when playing a JPEG disc.
001. F_001
002. F_002
File 1-40
001. FL000001
002. FL000002
003. FL000003
004. FL000004
005. FL000005
006. FL000006
007. FL000007
008. FL000008
The left column shows the folders on the disc,
the right column shows the files in a folder.
38
En
XV-DV323.book 39 ページ 2004年1月13日 火曜日 午後7時57分
Viewing JPEG discs
3 To resume the slideshow from the
highlighted file, press ENTER.
1 During slideshow playback, use the
ZOOM button to select the zoom factor.
• Normal
• 2x
• 4x
Normal
Français
Using the Photo Browser
Using the zoom feature you can magnify a part
of the screen by a factor of 2 or 4, while viewing
pictures from a JPEG disc.
Deutsch
• When a folder is highlighted you can press
ENTER to open the Photo Browser screen
for that folder. See below for more on using
the Photo Browser.
Zooming the screen
English
2 Use the cursor buttons (///) to
navigate.
When a file is highlighted, a thumbnail image
is displayed.
06
The Photo Browser displays nine thumbnail
images at a time from the current folder.
Photo Browser
2 / 40
Zoom 2x
Italiano
1 From the Disc Navigator screen,
highlight a folder to display then press
ENTER.
The Photo Browser screen opens with the first
nine pictures displayed as thumbnails.
Live at Soft
• To return to the Disc Navigator screen,
press RETURN.
3 Press ENTER to display the selected
thumbnail full size on screen.
The slideshow resumes from the selected
picture.
• The slideshow is paused when the screen
is zoomed.
Español
2 Use the cursor buttons (///) to
highlight a thumbnail picture.
• Use the track skip buttons ( and ) to
see the previous / next page of thumbnails.
Keep the button pressed if you want to skip
several pages; release when you reach the
page you want.
Nederlands
Zoom 4x
• Since JPEG pictures have a fixed
resolution, picture quality may deteriorate,
especially at 4x zoom. This is not a
malfunction.
2 Use the cursor buttons (///) to
change the zoomed area.
You can change the zoom factor and the
zoomed area freely.
3 To resume the slideshow, press (play).
39
En
XV-DV323.book 40 ページ 2004年1月13日 火曜日 午後7時57分
07
More tuner features: RDS
Chapter 7:
More tuner features: RDS
European model only
An introduction to RDS
Educate – Educational material
Radio Data System, or RDS as it’s usually
known, is a system used by FM radio stations
to provide listeners with various kinds of
information—the name of the station and the
kind of show they’re broadcasting, for example.
This information shows up as text on the
display, and you can switch between the kind
of information shown. Although you don’t get
RDS information from all FM radio stations,
you do with most.
Drama – Radio plays or serials
Varied – Usually talk-based material, such
as quiz shows or interviews.
Pop M – Pop music
Rock M – Rock music
Easy M – Easy listening music
Other M – Other music not fitting any of
the above categories
The receiver lets you display three different
kinds of RDS information: Radio Text, Program
Service Name, and Program Type.
Children – Programs for children
Program Service Name (PS) is the name of the
radio station.
Program Type (PTY) indicates the kind of
program currently being broadcast.
The receiver can search for and display the
following program types:
News – News
Affairs – Current affairs
Info – General information
Sport – Sport
En
Science – Science and technology
Probably the best feature of RDS is that you
can search automatically by type of program.
So, if you felt like listening to jazz, you could
search for a station that’s broadcasting a show
with the program type, Jazz. There are around
30 such program types, including various
genres of music, news, sport, talk shows,
financial information, and so on.
Radio Text (RT) is messages sent by the radio
station. These can be anything the broadcaster
chooses—a talk radio station might give out it
telephone number as RT, for example.
40
Culture – National or regional culture,
theater, etc.
Light M – ‘Light’ classical music
Classics – ‘Serious’ classical music
Weather – Weather reports
Finance – Stock market reports,
commerce, trading, etc.
Social – Social affairs
Religion – Programs concerning religion
Phone In – Public expressing their views
by phone
Travel – Holiday-type travel rather than
traffic announcements
Leisure – Leisure interests and hobbies
Jazz – Jazz
Country – Country music
Nation M – Popular music in a language
other than English
Oldies – Popular music from the ’50s and
’60s
Folk M – Folk music
Document – Documentaries
XV-DV323.book 41 ページ 2004年1月13日 火曜日 午後7時57分
More tuner features: RDS
• Press DISPLAY to select the RDS
information display.
Each press changes the display as follows:
• RT – Radio Text display
• PTY – Program Type display
• PTY SEARCH – see Searching for RDS
programs below
3 Use / (cursor left/right) to select
the program type you want to hear.
4 Press ENTER to search for the program
type.
The system starts searching through the
station presets for a match. When it finds one,
the search stops and the station plays for five
seconds.
5 If you want to keep listening to the
station, press ENTER within the 5 seconds.
If you don’t press ENTER, searching resumes.
Nederlands
• Current tuner frequency
2 Press DISPLAY repeatedly until PTY
SEARCH appears in the display.
Italiano
• PS – Program Service display
1 Press the TUNER button to select the FM
band.
RDS is only possible in the FM band.
Français
Use the DISPLAY button to display the
different types of RDS information available
(RT, PS and PTY).
One of the most useful features of RDS is the
ability to search for a particular kind of radio
program. You can search for any of the
program types listed on the previous page.
Deutsch
Displaying RDS information
Searching for RDS programs
English
In addition, there are three other program
types, TEST, Alarm!, and None. Alarm! and
TEST are used for emergency announcements.
You can’t search for these, but the tuner will
switch automatically to this RDS broadcast
signal. None appears when a program type
cannot be found.
07
Note
Español
• If any noise is picked up while displaying
the RT scroll, some characters may be
displayed incorrectly.
• If you see No Data in the RT display, it
means no RT data is transmitted from the
broadcast station. If you have entered a
name for the station, it is broadcast instead
of RT data. If you haven’t, the display will
automatically switch to the PS data
display. If no PS data is transmitted from
the station, the frequency will be displayed.
• In the PTY display, there are cases where
No Data or None is shown. If this
happens, the PS display is shown after a
few seconds.
41
En
XV-DV323.book 42 ページ 2004年1月13日 火曜日 午後7時57分
08
Using the timer
Chapter 8
Using the timer
Setting the wake-up timer
3
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
4 Press TIMER/CLOCK twice to reach the
timer menu.
Important
• The clock must be set to the correct time
for the wake-up timer to work properly (see
Setting the clock on page 14).
STANDBY/ON
CD
FM/AM
DVD
TUNER
LINE
FRONT
SURROUND
OPEN CLOSE
1
3
¡
4
7
RETURN
DVD MENU
TUNE+
ST–
CH
ST+
ENTER
BASS MODE DIALOGUE
SURROUND ADVANCED
VOL
TUNE–
MASTER
VOLUME
SOUND
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DISPLAY
TIMER/
CLOCK
DIMMER
MUTE
INPUT
0
8
4
TV CONTROL
L1/L2
TV
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
Set the volume.
5 Use the / (cursor left/right) buttons
to select ‘Wake-Up?’ then press ENTER.
6 Use the / (cursor left/right) buttons
to select ‘TimerEdit’ then press ENTER.
7 Set the switch-on time.
Use the / (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
8 Set the switch-off time.
Use the / (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
After pressing ENTER this last time, the wakeup indicator lights, and the switch-on, switchoff times, the function (DVD/CD, etc.) and
volume are confirmed in the display.
ROOM SETUP
TV CONTROL
1 Select the source you want played.
For example, press TUNER (FM/AM on the
front panel) to select the radio as your source.
2 Prepare the source.
For example, tune in the radio station you want
to wake up to.
9 Switch the system into standby mode.
The wake-up timer will not work if the system is
left on!
Tip
• You can check the timer settings in
standby by pressing TIMER/CLOCK twice.
(Press TIMER/CLOCK once to display the
current time.)
Turning the wake-up timer on/off
If the wake-up timer is on, it will switch on the
system everyday at the time you have set.
42
En
XV-DV323.book 43 ページ 2004年1月13日 火曜日 午後7時57分
Using the timer
08
2 Use the / (cursor left/right) buttons
to select ‘Wake-Up?’ then press ENTER.
2 Use the / (cursor left/right) buttons
to select ‘Sleep?’ then press ENTER.
3 Use the / (cursor left/right) buttons
to select ‘Timer On?’ or ‘Timer Off?’.
• You must have the timer set (see above) to
select ON. The wake-up timer switches on
and off according to your previous settings.
3 Use the / (cursor up/down) buttons
to select a switch-off time then press
ENTER.
Choose between the following options:
4
Press ENTER.
• The wake-up timer will automatically be
canceled if the clock is reset.
The sleep timer switches off the system after a
specified time so you can fall asleep without
worrying about it.
• If you set the sleep timer while either the
wake-up timer is active, the earlier switch
off time takes priority.
OPEN CLOSE
0
8
1
4
3
4
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
SOUND
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
¡
7
DVD MENU
MUTE
BASS MODE DIALOGUE
SURROUND ADVANCED
MAIN
SUB
• Sleep 30 – System switches off after 30
minutes
• Sleep Off – cancels the sleep timer
4 To check how much time is left, repeat
steps 1 and 2.
The remaining time is displayed momentarily.
Note
• Sleep Auto will not work with Video CDs
during PBC playback or CDs in repeat play.
Español
FRONT
SURROUND
• Sleep 60 – System switches off after an
hour
Nederlands
Important
• Sleep 90 – System switches off after 90
minutes
Italiano
Setting the sleep timer
• Sleep Auto – System switches off
automatically after the currently playing
CD, Video CD or WMA/MP3 disc has
finished.
Français
Note
Deutsch
1 Press TIMER/CLOCK twice to reach the
timer menu.
English
1 Press TIMER/CLOCK twice to reach the
timer menu.
ROOM SETUP
43
En
XV-DV323.book 44 ページ 2004年1月13日 火曜日 午後7時57分
09
Surround sound and other settings
Chapter 9
Surround sound and other settings
Using the System Setup menu
All the available settings in the setup menu are
listed in Surround and sound setup options and
SR+ control options for Pioneer plasma displays
below. See the notes in each section for
additional information about the settings.
Follow the steps below to customize the
settings in the System Setup menu.
FRONT
SURROUND
OPEN CLOSE
0
8
1
3
4
¡
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
7
DVD MENU
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
SOUND
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
MASTER
VOLUME
1
Press SYSTEM SETUP.
2 Use the / (cursor left/right) buttons
to choose the setting you want to adjust.
The current setting is shown for each option as
you cycle through the display. See below for a
full list and description of each.
3 Use the / (cursor up/down) buttons
to adjust the setting.
4 Repeat steps 2 and 3 to make other
settings.
5 When you’re done, press ENTER to
leave the System Setup menu.
• You can't change the Surround and sound
setup options with the Recording Mode
(page 54) switched on.
Surround and sound setup options
The Room Setup feature (page 15) is designed
to give you a basic surround sound setup,
however you can make more detailed settings
that may improve the surround sound in your
listening room. Note that the first setting in
each section is the default.
Front speakers distance setting
Specifies the distance from your listening
position to the front speakers:
• Front 0.3 m ~ Front 9 m – Distance can
be set in increments of 0.3 m. The default is
3 m.
Center speaker distance setting
Specifies the distance from your listening
position to the center speaker:
• Center 0.3 m ~ Center 9 m – Distance
can be set in increments of 0.3 m. The
default is 3 m.
Surround speakers distance setting
Specifies the distance from your listening
position to the surround speakers:
• Surr. 0.3 m ~ Surr. 9 m – Distance can be
set in increments of 0.3 m. The default is 3
m.
Dynamic Range Control
Note
• The System Setup menu is exited
automatically after 5 minutes of inactivity.
44
En
Specifies the amount of dynamic range
adjustment to Dolby Digital or DTS
soundtracks:
XV-DV323.book 45 ページ 2004年1月13日 火曜日 午後7時57分
Surround sound and other settings
• LFE ATT 0 – The LFE channel is played with
no attenuation
• DRC Mid – Mid setting
• LFE ATT 10 – LFE channel is attenuated by
10dB
• DRC High – Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased)
Dual mono setting
• Ch1 Mono – Only channel 1 is played
• Ch2 Mono – Only channel 2 is played
• On the Ch1 Mono and Ch2 Mono settings
the sound comes only from the center
speaker (or from the front speakers if
listening in STEREO mode).
• This setting works only with dual mono
encoded Dolby Digital or DTS soundtracks.
See the disc packaging for channel
information.
LFE attenuator setting
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator as
needed to prevent the ultra-low bass from
distorting the sound.
Control mode setting
• SR+ Off – Switches SR+ off (this unit and
the plasma display work independently)
• SR+ On – Switches SR+ on (this unit
sends control signals to the plasma
display)
The following settings are only available if the
Control mode setting (above) is switched on.
Volume control setting
• Vol C.Off – This unit does not control the
volume of the plasma display
Español
Note
Note that in the function settings below, the
number of video inputs may change depending
on your display. See also Using this unit with a
Pioneer plasma display on page 57.
Nederlands
• L-Ch1 R-Ch2 – Both channels are played
through the front speakers
You only need to make the following settings if
you have connected a Pioneer plasma display
to this unit using an SR+ cable (not supplied).
Italiano
Specifies how dual mono encoded Dolby
Digital or DTS soundtracks should be played.
You can also use this setting to switch the
audio channel on DVD-RW discs recorded with
two separate soundtracks.
SR+ control options for Pioneer
plasma displays
Français
• This setting works only with Dolby Digital
and some DTS soundtracks. For other
sources, you can create a similar effect
using the Midnight mode (see Using Quiet
and Midnight listening modes on page 27).
• LFE OFF – LFE channel is not played
Deutsch
Note
English
• DRC Off – No dynamic range adjustment
(use when listening at higher volume)
09
• Vol C.On – When this unit is switched to
an input that used the plasma display
(DVD, for example), the volume on the
plasma display is muted so only sound
from this unit is heard.
Function setting for DVD input
• DVD -> OFF/PDP1–5/PDPTV – Matches
the DVD function of this unit with a
numbered video input on the plasma
display. For example, DVD -> PDP2
matches the DVD input with video input 2
on the plasma display.
45
En
XV-DV323.book 46 ページ 2004年1月13日 火曜日 午後7時57分
09
Surround sound and other settings
Function setting for TV input
• TV -> OFF/PDP1–5/PDPTV – Matches the
TV function of this unit with a numbered
video input on the plasma display. For
example, TV -> PDP1 matches the TV
input with video input 1 on the plasma
display.
Function setting for L1 input
• LINE1 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L1) function of this unit with a
numbered video input on the plasma
display. For example, LINE1 -> PDP3
matches the LINE1 input with video input 3
on the plasma display.
Setting the channel levels
You can set the relative channel levels from
your main listening position for all of the
listening modes independently. However, the
SURROUND modes are divided into two
independent groups: multichannel listening
modes and stereo listening modes only.
If you used the Room Setup feature (page 15),
the channel levels for each listening mode will
already be set. However, you can still fine-tune
the levels here if you need to.
CD
FM/AM
DVD
TUNER
• LINE2 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L2) function of this unit with a
numbered video input on the plasma
display. For example, LINE2 -> PDP3
matches the LINE2 input with video input 3
on the plasma display.
LINE
OPEN CLOSE
0
8
1
Function setting for L2 input
L1/L2
TV
FRONT
SURROUND
4
3
¡
7
4
RETURN
DVD MENU
ENTER
MUTE
SOUND
MASTER
VOLUME
SURROUND
ADVANCED
CH LEVEL
VIRTUAL SB
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
TV CONTROL
1 Select a listening mode.
Press SURROUND, ADVANCED or FRONT
SURROUND repeatedly to select the listening
mode you want.
2 Switch the remote control to SUB, then
press TEST TONE to hear the test tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• RS – Right surround speaker
• LS – Left surround speaker
• SW – Subwoofer
46
En
Setting_up_for_surround.fm 47 ページ 2004年1月15日 木曜日 午後5時11分
Surround sound and other settings
09
English
3 Use the MASTER VOLUME +/– button to
adjust the volume to an appropriate level.
Turn down the volume to 40 or less to ensure
you have adequate headroom.
Deutsch
4 Use the / (cursor up/down) buttons
to adjust the speaker levels in turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ± 10 dB.
Français
5 When you’re done, press ENTER to exit
test tone setup.
Tip
Italiano
• The speaker volume can be adjusted while
listening to any sound source you want by
pressing CH LEVEL and then using the /
(cursor up/down) buttons to adjust the
channel levels. After you’re finished with
one channel, use the / (cursor left/
right) buttons to move to the next.
Nederlands
Note
Español
• When the Auto listening mode is selected,
using the test tone method will adjust
levels for multichannel sources only. Use
CH LEVEL and the / (cursor up/down)
buttons (see tip above) to set levels for the
Auto listening mode with two channel
sources.
• Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.
47
En
XV-DV323.book 48 ページ 2004年1月13日 火曜日 午後7時57分
10
Video Adjust menu
Chapter 10
Video Adjust menu
Video Adjust
• Default setting: Standard
2 Press (cursor down) to select
‘Detailed Settings’ then press ENTER.
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
1 Press HOME MENU and select ‘Video
Adjust’ from the on-screen display.
Video Adjust
2 Use the / (cursor left/right) buttons
to select a preset.
Video Adjust
Memory1
Detailed Settings
3
Adjust the picture quality settings.
Memory1
Recall Settings
Memory1
Contrast
min
max
Brightness
min
min
max
max
Chroma Level
Video Adjust
Standard
• Use the / (cursor up/down) buttons to
select a setting.
• Standard – Normal
• Memory1–2 – Use for saving your own
presets (see below)
3 Press ENTER to make the setting and
exit the Video Adjust screen.
Note
• Depending on the disc and the TV/monitor,
you may not see the effect clearly.
Creating your own presets
You can create up to three presets of your own.
1 Select one of the Memory presets (see
above).
48
En
• Use the / (cursor left/right) buttons to
adjust the current setting.
• Press DISPLAY to switch between full and
single view.
• You can change the preset number from
the Recall Settings menu item.
You can adjust any or all of the following
picture quality settings:
• Contrast – Adjusts the contrast between
light and dark.
• Brightness – Adjusts the overall brightness.
• Chroma Level – Adjusts how saturated
colors appear.
4 Press ENTER to save the preset and exit
the Video Adjust screen.
XV-DV323.book 49 ページ 2004年1月13日 火曜日 午後7時57分
Initial Settings menu
11
English
Chapter 11
Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
Note
• European model only – The AV Connector
Out setting only needs to be set if you have
connected this player to your TV using a
SCART cable (See Using the SCART AV
output on page 56).
Nederlands
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
Italiano
Initial Settings
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
Français
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’.
Deutsch
Using the Initial Settings menu
Video Output settings
Option
What it means
TV Screen
4:3 (Letter Box)
(See also Screen sizes
and disc formats on
page 68.)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
Video
Standard video, compatible with all TVs.
S-Video
Higher quality, but check your TV for compatibility.
RGB
Best quality, but check your TV for compatibility.
AV Connector Out
European model only
(See also Using the
SCART AV output on
page 56.)
Español
Setting
49
En
Initial settings menu.fm 50 ページ 2004年1月13日 火曜日 午後9時24分
11
Initial Settings menu
Setting
Option
What it means
Component Out
Interlace
Set if your TV is not compatible with progressive scan video.
Progressive
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). Press ENTER once
more to confirm (or RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks and that there is no output from the
composite and S-video jacks when this setting is selected.
S2
Standard setting.
Not applicable to the
European model
(See also Connecting
using the component
video output on
page 55.)
S-Video Out
Not applicable to the
S1
European model
(See also Connecting
using the S-video output
on page 55.)
If you find that the picture is stretched or distorted on the
default S2 setting, try changing it to this setting.
Language settings
Setting
Option
What it means
Audio Language
English
If there is an English soundtrack on the disc then it will be
played.
Languages as displayed If there is the language selected on the disc, then it will be
played.
Subtitle Language
Other Language
Select to choose a language other than the ones displayed (see
Selecting languages using the language code list on page 68).
English
If there is are English subtitles on the disc then they will be
displayed.
Languages as displayed If there is the subtitle language selected on the disc, then it will
be displayed.
DVD Menu Language
Other Language
Select to choose a language other than the ones displayed (see
Selecting languages using the language code list on page 68).
w/Subtitle Lang.
DVD disc menus will be displayed in the same language as
your selected subtitle language, if possible.
Languages as displayed DVD disc menus will be displayed in the selected language, if
possible.
Subtitle Display
50
En
Other Language
Select to choose a language other than the ones displayed
(Selecting languages using the language code list on page 68).
On
Subtitles are displayed according to your selected subtitle
language (see above).
Off
Subtitles are always off by default when you play a DVD disc
(note that some discs override this setting).
XV-DV323.book 51 ページ 2004年1月13日 火曜日 午後7時57分
Initial Settings menu
11
Setting
Option
What it means
OSD Language
English
On-screen displays of the player are in English.
English
Display settings
Languages as displayed On-screen displays are shown in the language selected.
Operation displays (Play, Resume, Scan, and so on) are
shown on-screen.
Off
Operation displays are not shown.
On
A camera icon is displayed on-screen during multi-angle
scenes on a DVD disc.
Off
No multi-angle indication is shown.
Setting
Option
What it means
Parental Lock
See below
See Parental Lock below.
Photo Viewer
On
Only the JPEG files are shown on discs that contains both
WMA/MP3 audio files and JPEG picture files.
Angle Indicator
Français
On
Deutsch
On Screen Display
Options
To give you some control over what your
children watch on your DVD player, some DVDVideo discs feature a Parental Lock level. If
your player is set to a lower level than the disc,
the disc won’t play.
Español
• If you forget your password, you’ll need to
reset the player to register a new password.
(see Resetting the system on page 60)
• Default level: Off; Default password: none;
Default Country code: us (2119)
Note
Nederlands
WMA/MP3 audio file playback is possible.
Parental Lock
Some discs also support the Country Code
feature. The player does not play certain
scenes on these discs, depending on the
Country Code you set.
Italiano
Setting does not take
effect until the next disc
is loaded (or the current Off
disc is reloaded).
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country code.
1
Select ‘Password’.
Initial Settings
Video Output
Language
Display
Options
Parental Lock
PhotoViewer
Password
Level Change
Country Code
• Not all discs use Parental Lock, and will
play without requiring the password first.
51
En
XV-DV323.book 52 ページ 2004年1月13日 火曜日 午後7時57分
11
Initial Settings menu
2 Use the number buttons to enter a 4digit password.
The numbers you enter show up as asterisks
(*) on-screen.
3 Press ENTER to register the password.
You will return to the Options menu screen.
Changing your password
To change your password, confirm your
existing password then enter a new one.
1
Select ‘Password Change’.
2 Use the number buttons to enter your
existing password, then press ENTER.
3 Enter a new password and press ENTER.
This registers the new password and you will
return to the Options menu screen.
Setting/changing the Parental Lock
1
Select ‘Level Change’.
2 Use number buttons to enter your
password, then press ENTER.
3
Select a new level and press ENTER.
• Press (cursor left) repeatedly to lock
more levels (more discs will require the
password); press (cursor right) to
unlock levels. You can’t lock level 1.
This sets the new level and you will return to the
Options menu screen.
Setting/changing the Country code
You can find the Country code list on page 69.
1
Select ‘Country Code’.
2 Use number buttons to enter your
password, then press ENTER.
3 Select a Country code and press ENTER.
There are two ways you can do this:
• Select by code letter: Use / (cursor up/
down) to change the Country code.
52
En
• Select by code number: Press (cursor
right) then use the number buttons to enter
the 4-digit Country code.
The new Country code is set and you will return
to the Options menu screen. Note that the new
Country code doesn’t take effect until the next
disc is loaded (or the current disc is reloaded).
XV-DV323.book 53 ページ 2004年1月13日 火曜日 午後7時57分
Other connections
12
English
Chapter 12
Other connections
External AM antenna
This system has both stereo analog inputs and
outputs, as well as a optical digital input. Use
these to connect external components, such
as your VCR, MD or CD-R recorder.
Use 5–6 meters of vinyl-insulated wire and set
up either indoors or outdoors. Leave the AM
loop antenna connected.
Français
Connecting auxiliary
components
Deutsch
Connecting external antennas
Outdoor antenna
AUDIO
OUTPUT
Italiano
Indoor
antenna
(vinyl-coated
wire)
TV
5–6m
AM
LOOP ANTENNA
XV–DV323/424
IN
Use a PAL connector to hook up an external
FM antenna.
FRONT
PEAKERS
6
CENTER
6
IN
OUT
Nederlands
External FM antenna
SURROUND
6
L
L
TV AUDIO LINE 1
R
R
6
6
6
SUB
WOOFER
ANTENNA
Español
• Connect the TV (IN) jacks to the audio
outs of your TV (or VCR).
This will enable you to hear the TV (or VCR)
through this system. Connect using RCA pinplug stereo cables.
PAL connector
53
En
XV-DV323.book 54 ページ 2004年1月13日 火曜日 午後7時57分
12
Other connections
Tape deck, etc.
Tip
AUDIO
OUTPUT
AUDIO
INPUT
XV-DV323/424
IN
FRONT
EAKERS
6
CENTER
6
IN
Recording mode
OUT
SURROUND
6
L
L
TV AUDIO LINE 1
R
R
6
6
6
SUB
WOOFER
• Connect the LINE 1 (IN) jacks to the
analog outputs of an external playback
component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables.
• Connect the LINE 1 (OUT) jacks to the
analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD, or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
• Connect the LINE 2 (OPTICAL IN) jack on
the rear panel to the optical digital output
of an external playback component.
OPTIC
AL IN
LINE
2
These include digital components such as an
MD player, digital satellite, or a game system.
Connect using a optical digital cable (not
supplied).
54
En
• If you’re playing a high signal level source
which is producing unpleasant distortion
from the speakers, you can reduce the
signal level of the auxiliary source
(connected to the TV or LINE 1 analog
inputs) by switching on the attenuator. See
Optional system settings on page 59 to do
this.
The Recording mode allows you to make
surround-compatible analog recordings from
the LINE 1 (OUT) jacks. Dolby multichannel
sources will be downmixed to stereo for
improved playback with systems that can
provide matrix-decoding (like Dolby Pro Logic).
1
Press SOUND.
2 Use the / (cursor left/right) buttons
to select ‘Rec Mode?’.
3
Press ENTER.
4 Use the / (cursor up/down) buttons
to select ‘R.Mode On’ or ‘R.Mode Off’.
• R.Mode On – A surround-compatible
downmix (left-total/right-total, or Lt/Rt) of
Dolby multichannel sources is output,
(suitable for Dolby Surround Pro Logic or
other matrix decoding).
• R.Mode Off – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
Note
• When Recording mode is on, most
surround sound-related functions cannot
be used. The display will briefly blink
RecMode On if you try and use a
prohibited function while Recording mode
is on.
XV-DV323.book 55 ページ 2004年1月13日 火曜日 午後7時57分
Other connections
12
Connecting using the S-video
output
If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV. This should
give you the best quality picture from the three
types of video output available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
Italiano
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
Français
Not applicable to the European model
Not applicable to the European model
Deutsch
• The Recording mode automatically
switches off if you change the input
function (DVD/CD, TUNER, etc.) or switch
the power off.
Connecting using the
component video output
English
• When Recording mode is off, the audio
from the analog output may be interrupted,
depending on the operation.
COMPONENT
INPUT
TV
Nederlands
XV–DV323/424
IN
S-VIDEO
INPUT
CONTROL
FM
ANTENNA UNBAL 75Ω
Y
PB
PR
Español
TV
AM
LOOP ANTENNA
COMPONENT VIDEO OUT
XV–DV323/424
OPTICAL IN
AUDIO
LINE 2
S-VIDEO VIDEO
OUT
OUT
VIDEO
IN
CONTROL
FM
ANTENNA UNBAL 75Ω
Y
PB
AM
LOOP ANTENNA
PR
COMPONENT VIDEO OUT
Note
• The component video output is switchable
between interlaced and progressive
formats. See Video Output settings on
page 49 for more on this.
About progressive scan video
Note
• The S-video output is switchable between
S1 and S2 formats for compatibility with all
TVs. See Video Output settings on page 49
to change this setting.
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flickerfree image. Progressive scan video is available
only from the component video output.
55
En
Other connections.fm 56 ページ 2004年1月13日 火曜日 午後9時29分
12
Other connections
Important
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the system to progressive, you will not be
able to see any picture at all. In this case,
press STANDBY/ON to put the system
in standby, then press and hold the front
panel (stop) button for about 8 seconds
until the display shows Mem.Clr.?. Press
the front panel VOLUME – (DOWN) or +
(UP) button so that the display shows
Interlace?. Press the front panel button to set to interlace and switch the
system back on.
When TV format is set to AUTO or NTSC:
• When set to Progressive, PAL and NTSC
discs are both output as progressive NTSC
video. See also TV format setting on
page 60
connection to the ‘standard definition’ output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.
This system is compatible with the following
Pioneer displays and monitors: PDP-503HDG,
PDP-504HDG, PDP-433HDG, PDP-434HDG.
Using the SCART AV output
European model only
There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
• Use a commercially available SCART
cable to connect the AV CONNECTOR to
your TV.
• When Component Out (above) is set to
Progressive, there is no video output from
the VIDEO and S-VIDEO jacks. If you want
to display video on more than one monitor
simultaneously, make sure that it is set to
Interlace. See also TV format setting on
page 60.
TV
When TV format is set to PAL:
• Progressive cannot be selected. See also
TV format setting on page 60.
IN
FRONT
6
CENTER
6
IN
OPTICAL IN
OUT
6
LINE 2
L
Consumers should note that not all highdefinition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525
progressive scan picture problems, it is
recommended that the user switch the
56
En
AM
LOOP ANTENNA
TV AUDIO LINE 1
6
6
SUB
WOOFER
This player is compatible with progressive
video Macro Vision System Copy Guard.
IN
CONTROL
FM
ANTENNA UNBAL 75Ω
AV CONNECTOR
R
R
6
Compatibility of this player with
progressive-scan and high-definition TVs.
AUDIO
L
SURROUND
AC IN
VIDEO
OUT
VIDEO
XV-DV323/424
Note
• SCART cables are available in several
configurations. Make sure that the one you
get will work with this system and your TV/
monitor. You can find the pin assignments
below.
XV-DV323.book 57 ページ 2004年1月13日 火曜日 午後7時57分
Other connections
12
Pin
No.
Assignment
Pin
No.
You can set the TV audio input to RCA or
SCART.
8
Status
19
Video or Y
OUT
9
GND (video)
20
No
connection
3 Use the / (cursor left/right) buttons
to select ‘TV Audio?’.
10
No
connection
21
GND (video)
4
11
G OUT
Press TV.
2
Press SYSTEM SETUP.
Press ENTER.
6
Press ENTER
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG or (European
model only) PDP-504HDE and PDP-434 HDE),
you can use an SR+ cable (see note below) to
connect it to this unit and take advantage of
various convenient features, such as
automatic video input switching of the plasma
display when the input is changed.
Nederlands
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV or
monitor.
Using this unit with a Pioneer
plasma display
Italiano
SCART pin assignment
Français
5 Use the / (cursor up/down) buttons
to select SCART or RCA.
Assignment
Deutsch
1
English
Switching the TV audio input from
SCART to RCA
Media receiver
CONTROL
Assignment
Pin
No.
1
Audio R OUT
12
Assignment
Español
Pin
No.
OUT
Pioneer plasma display
No
connection
2
Audio R IN
13
GND (video)
3
Audio L OUT
14
GND (video)
4
GND (audio)
15
R or C OUT
5
GND (video)
16
BLANK OUT
6
Audio L IN
17
GND (video)
7
B OUT
18
GND (video)
XV-DV323/424
IN
CONTROL
FM
AV CONNECTOR ANTENNA UNBAL 75Ω
AM
LOOP ANTENNA
The illustration above shows the European
model.
57
En
Other connections.fm 58 ページ 2004年1月14日 水曜日 午後6時55分
12
Other connections
• Use a 3-ringed miniplug SR+ cable to
connect the CONTROL IN jack of this unit
through a media receiver to the CONTROL
OUT jack of your plasma display.
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ control options for Pioneer plasma displays
on page 45 for detailed instructions.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features (such as automatic video
input switching and volume muting on the
plasma display) become available to make
using this unit with your Pioneer plasma
display even easier.
See also SR+ control options for Pioneer
plasma displays on page 45 for information on
setting up the unit.
1 Make sure that the plasma display and
this unit are switched on and that they are
connected with an SR+ cable.
See Using this unit with a Pioneer plasma
display above for more on connecting these
components.
2 To switch SR+ mode on/off, press SR+
(SHIFT + 7).
The front panel display shows the new setting;
SR+ ON or SR+ OFF.
• If SR+ Error shows in the display, it means
there is a communication problem
between the unit and the plasma display.
Check all connections and retry.
Note
• The 3-ringed SR+ cable from Pioneer is
commercially available under the part
number ADE7095. Contact the Pioneer
Customer Support division for more
information on obtaining an SR+ cable.
58
En
• You won’t be able to use the remote sensor
of this unit with the CONTROL IN jack of
this unit connected to the CONTROL OUT
jack of your plasma display. You can use
the remote sensor of the plasma display
(even in standby) as long as the power isn’t
switched off.
• The automatic volume muting feature is
enabled separately; see SR+ control
options for Pioneer plasma displays on
page 45. (You can also use the System
Setup menu to switch the SR+ mode of
this unit.)
• If you disconnect the SR+ cable or switch
the plasma display off while SR+ is on, the
setting automatically reverts to SR+ OFF.
This displays an error if you switch the
input of the unit with the plasma display
switched off. Likewise, if this unit is
switched off, the link with the plasma
display will be terminated.
XV-DV323.book 59 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
13
English
Chapter 13
Additional information
Child lock setting
These settings are accessed by using the
System Setup menu while in standby.
The Child Lock feature is useful when you’ve
set the wake-up timer and don’t want the
system switched on before it activates.
FRONT
SURROUND
OPEN CLOSE
0
8
3
¡
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
QUIET/
MIDNIGHT
4
5
6
DIMMER
DISPLAY
TIMER/
CLOCK
7
8
9
SOUND
SR+
FOLDER–
FOLDER+
CLR
0
ENTER
MAIN
SUB
ROOM SETUP
MASTER
VOLUME
Switch the system into standby.
2
Press SYSTEM SETUP.
4 Use the / (cursor up/down) buttons
to adjust the setting.
5 Repeat steps 2 and 3 to make other
settings.
6
Press ENTER to confirm.
System Setup menu options in standby
Below are all the available settings in the setup
menu. The first setting in each section is the
default. See also the notes in each section for
additional information about the settings.
Clock format setting
Specifies how the clock is displayed:
• 12-Hour – Sets the clock to show in 12hour format in the display.
• 24-Hour – Sets the clock to show in 24hour format in the display.
TV attenuator setting
If the source connected to the TV analog input
is producing distortion through the speakers,
the attenuator will reduce the signal level.
• ATT 6dB – Reduces the signal level by 6dB.
Español
3 Use the / (cursor left/right) buttons
to choose the setting you want to adjust
then press ENTER.
The current setting is shown for each option as
you cycle through the display. See below for a
full list and description of each.
• Lock Off – Restores regular use of the
front panel buttons and controls.
Nederlands
1
• Lock On – Makes the front panel buttons
and controls inoperative.
Italiano
MUTE
REPEAT
SUBTITLE
4
7
DVD MENU
PROGRAM
AUDIO
Français
1
4
BASS MODE DIALOGUE
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
Deutsch
Optional system settings
• ATT 10dB – Reduces the signal level by
10dB.
• ATT Off – No attenuation
Line attenuator setting
If the source connected to the LINE analog
input is distorting, the attenuator can reduce
the signal level.
• ATT 6dB – Reduces the signal level by 6dB.
• ATT 10dB – Reduces the signal level by
10dB.
• ATT Off – No attenuation
59
En
XV-DV323.book 60 ページ 2004年1月13日 火曜日 午後7時57分
13
Additional information
Frequency step setting
Note
Not applicable to the European model
• After setting the clock, the demo mode
switches off automatically. However, if you
unplug the system from the wall outlet, the
demo mode will revert to Demo On (and
the clock will be reset).
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
• FM50. AM9
• FM100. AM10
TV format setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you experience picture
distortion with some discs, set the TV system to
match your country or region’s system. Doing
this, however, may restrict the kinds of disc you
can watch. The table below shows what kinds
of disc are compatible with each setting
(AUTO, PAL and NTSC).
Disc
Player setting
On some TVs, the picture may shrink vertically,
leaving black bands at the top and bottom of
the screen. This is not a malfunction; it is
caused by the NTSC to PAL conversion.
PAL
DVD
NTSC
NTSC
MOD.PAL NTSC
/Super VCD PAL
NTSC
PAL
Video CD NTSC
NTSC
MOD.PAL NTSC
Resetting the system
PAL
NTSC
PAL
PAL
—
NTSC
PAL
NTSC or
PAL
Use this procedure to reset all system settings
to the factory default.
PAL
Switches the automatic demo feature on or off
(this starts when the system is plugged in for
the first time):
• Demo On – Switches the demo feature on.
• Demo Off – Switches the demo feature off.
En
If your PAL TV does not have a V-Hold control,
you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold
control, adjust it until the picture stops rolling.
Format NTSC
System demo setting
60
Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz
(NTSC) and automatically switch vertical
amplitude, resulting in a display without
vertical shrinkage. However, in some cases,
the image may appear without color.
Type
CD/no disc
AUTO
Watching NTSC on a PAL TV
(MOD. PAL)
1
Switch the system into standby.
2 Press and hold the front panel (stop)
button for about 8 seconds until the
display shows ‘Mem.Clr.?’.
3 Press the front panel button.
All the system’s settings are now reset, and
you should see the ‘Let’s Get Started’ screen.
XV-DV323.book 61 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
13
The diagram below shows the various DVD
regions of the world.
English
Using and taking care of discs
Titles, chapters and tracks
Title 1
Title 2
Title 3
CDs and Video CD/Super VCDs are divided into
tracks.
Track 3 Track 4
Track 5
Track 6
Track 1
Track 2
Track 3
Folder B
Folder C
Track 1
File 1
.jpg
.jpg
.mp3
.mp3
.mp3
.mp3
Folder A
Damaged or dirty discs can affect playback
performance. Take care also not to scratch the
label side of the disc. Although not as fragile as
the recorded side, scratches can still result in
a disc becoming unusable.
Should a disc become marked with
fingerprints, dust, etc., clean using a soft, dry
cloth, wiping the disc lightly from the center to
the outside edge as shown in the diagram
below.
Nederlands
CD-ROMs contain folders and files. MP3 and
WMA files are referred to as tracks. Folders
may contain further folders.
When holding discs of any type, take care not
to leave fingerprints, dirt or scratches on the
disc surface. Hold the disc by its edge or by the
center hole and edge.
Italiano
Track 2
Handling discs
Français
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
Track 1
Deutsch
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
File 2
Español
DVD Video regions
All DVD Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD system also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. Discs marked ALL will play in any
player.
Wipe lightly from the center of the disc using
straight strokes.
Don’t wipe the disc surface using circular
strokes.
61
En
XV-DV323.book 62 ページ 2004年1月13日 火曜日 午後7時57分
13
Additional information
If necessary, use a cloth soaked in alcohol, or a
commercially available CD/DVD cleaning kit to
clean a disc more thoroughly. Never use
benzine, thinner or other cleaning agents,
including products designed for cleaning vinyl
records.
Storing discs
Although CDs and DVD discs are more durable
than vinyl records, you should still take care to
handle and store discs correctly. When you're
not using a disc, return it to its case and store
upright. Avoid leaving discs in excessively cold,
humid, or hot environments (including under
direct sunlight).
Don't glue paper or put stickers onto the disc,
or use a pencil, ball-point pen or other sharptipped writing instrument. These could all
damage the disc.
For more detailed care information see the
instructions that come with discs.
This unit is designed for use with conventional,
fully circular discs only. Use of shaped discs is
not recommended for this product. Pioneer
disclaims all liability arising in connection with
the use of shaped discs.
Proper installation and
maintenance of this system
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as
a table, shelf or stereo rack.
Don’t...
Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
Do not load more than one disc into the player
at a time.
Place on a window sill or other place where
the system will be exposed to direct
sunlight.
Discs to avoid
Use in an excessively dusty or damp
environment.
Discs spin at high speed inside the player. If
you can see that a disc is cracked, chipped,
warped, or otherwise damaged, don't risk
using it in your player—you could end up
damaging the unit.
Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Use near a television or monitor as you may
experience interference—especially if the
television uses an indoor antenna.
Use in a kitchen or other room where the
system may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the system.
62
En
XV-DV323.book 63 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
Cleaning the pickup lens
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
Italiano
Nederlands
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
player, it may temporarily impair its
performance. For this reason you should leave
it to adjust to the warmer temperature for
about an hour before switching on and using.
Français
Problems with condensation
Handle the power cord by the plug. Do not pull
out the plug by tugging the cord and never
touch the power cord when your hands are wet
as this could cause a short circuit or an electric
shock. Do not place this unit, a piece of
furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it
with other cords. The power cords should be
routed such that they are not likely to be
stepped on. A damaged power cord can cause
a fire or give you an electrical shock.
Deutsch
The DVD player’s lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners are commercially
available, we do not recommend using them
since some may damage the lens.
Power cord caution
English
Place on an unstable surface, or one that is
not large enough to support all four of the
unit’s feet.
13
Moving the system unit
Español
If you need to move the main unit, first remove
a disc if there’s one in the player, then press STANDBY/ON on the front panel to turn the
system off. Wait for Good Bye to disappear
from the display, then unplug the power cord.
Never lift or move the unit during playback—
discs rotate at a high speed and may be
damaged.
Note
• Unplugging the unit before Good Bye
disappears from the display may cause the
system to return to the factory settings.
63
En
XV-DV323.book 64 ページ 2004年1月13日 火曜日 午後7時57分
13
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Investigate the other components and electrical appliances being used. If the
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Important
• If the system does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
General
64
En
Problem
Remedy
The power does not
turn on.
• Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching the rear
panel. This could cause the system to shut off automatically.
No sound is output
when a function is
selected.
• If you’re using the line input, make sure the component is connected
correctly (see Connecting auxiliary components on page 53).
• Press MUTE on the remote control to turn muting off.
• Adjust the VOLUME.
• If you’re using the TV input, make sure you’ve selected the RCA audio input
(see Switching the TV audio input from SCART to RCA on page 57).
No image is output
when playing discs.
• Make sure the TV is connected correctly (refer to the Setup Guide).
• Not applicable to the European model – Reset the video output to interlace
(see Video Output settings on page 49).
No sound from
surround or center
speakers.
• Refer to Setting the channel levels on page 46 to check the speaker levels.
• Check that you haven’t selected the STEREO sound mode (see Listening in
surround sound on page 24).
• Connect the speakers properly (refer to the Setup Guide).
Can’t operate the
remote control.
• Replace the batteries (refer to the Setup Guide).
• Operate within 7 m, 30° of the remote sensor on the front panel (refer to the
Setup Guide).
• Remove any obstacles or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
• You won’t be able to use the remote sensor of this unit with the CONTROL
IN jack of this unit connected to the CONTROL OUT jack of your plasma
display. You can use the remote sensor of the plasma display (even in
standby) as long as the power isn’t switched off.
XV-DV323.book 65 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
Remedy
English
Problem
13
Sound Demo shows in • Press and hold (stop) on the front panel for about five seconds. The disc
the display and the unit tray ejects automatically to indicate the Sound Demo mode is disabled.
can’t be controlled.
• Unplug the unit, then plug back in. Wait for one minute then switch on.
• Make sure the fan at the rear of the unit is not being blocked.
• Check that the speakers are connected correctly.
• Make sure the voltage of the mains power source is correct for the model.
• If the problem persists, take it to your nearest Pioneer
authorized service center or your dealer for servicing.
Deutsch
Timer indicator is
blinking and the
system will not switch
on.
Français
DVD/CD/Video CD player
Playback is not
possible.
• If the disc is loaded upside down, reload the disc with the label side face
up.
Nederlands
Remedy
• Clean the disc.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see DVD Video regions on page 61).
• Allow time for any condensation inside the player to evaporate. Avoid using
the player near an air-conditioning unit.
Italiano
Problem
The disc is ejected
automatically after
loading.
Picture playback stops
• Press (stop), then (play) to start playback again.
and the operation
• Switch the power off once, then on again using the front panel
buttons cannot be
STANDBY/ON button.
used.
Español
Settings are canceled. • When the power is cut due to power failure or by unplugging the power
cable, settings will be canceled.
No picture/No color.
Screen is stretched or
aspect does not
change.
• Check that connections are correct and that plugs are inserted fully.
• Check the instruction manual of the TV/monitor to make sure the TV/
monitor settings are incorrect.
• The TV Screen setting is incorrect. Set the TV Screen option to match the
TV/monitor you're using (see Video Output settings on page 49).
When recorded on a
• This system uses copy-protection technology which may prevent recording
VCR or passed through or cause picture problems when connected through a VCR or AV selector.
an AV selector, there is This is not a malfunction.
disturbance in the
playback picture.
65
En
XV-DV323.book 66 ページ 2004年1月13日 火曜日 午後7時57分
13
Additional information
Problem
Remedy
CD won’t play
• Set the PhotoViewer menu option in the Initial Settings menu to Off to be
able to play some copy-protected CDs. See Options on page 51.
Picture disturbance
during playback or
dark.
• This player is compatible with Macro-Vision System copy guard. Some
discs include a copy prevention signal, and when this type of disc is played
back, stripes etc., may appear on some sections of the picture depending on
the TV. This is not a malfunction.
• Discs respond differently to particular player functions. This may result in
the screen becoming black for a brief instant or shaking slightly when the
function is executed. These problems are largely due to differences between
discs and disc content and are not malfunctions of this player.
Noticeable difference
in DVD and CD
volume.
• DVDs and CDs use different recording methods. This is not a malfunction.
WMA/MP3/JPEG discs
Problem
Remedy
CD-ROM disc is not
recognized by the
system.
• Make sure that the CD-ROM was recorded using the ISO 9660 disc format.
See Disc / content format playback compatibility on page 6 for other disc
compatibility information.
Files don’t show up in
the Disc Navigator/
Photo Browser.
• The files on the disc must be named with the correct file extension: .mp3
for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case is
OK). See Disc / content format playback compatibility on page 6 for other disc
compatibility information.
Can play JPEG files,
but not WMA/MP3
files on the same disc
(or vice versa).
• Set the PhotoViewer menu option in the Initial Settings menu to Off to be
able to access the WMA/MP3 files. Set to On to be able to play the JPEG files.
See Options on page 51.
Can’t play WMA files.
• The files were recorded using DRM (digital rights management). This is not
a malfunction. See DRM in the Glossary on page 71.
Tuner
66
En
Problem
Remedy
Considerable noise in
radio broadcasts.
• Connect the antenna (refer to the Setup Guide) and adjust the direction and
position for best reception.
• Fully extend the FM wire antenna, position for best reception, and secure to
a wall.
XV-DV323.book 67 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
• Connect an outdoor FM antenna (see Connecting external antennas on
page 53).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and Connecting external antennas on page 53).
• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
• Not applicable to the European model – The tuning interval is incorrect for
your country or region. Try switching the tuning interval (frequency step) (see
Frequency step setting on page 60).
Deutsch
Remedy
Considerable noise in
radio broadcasts
(continued).
English
Problem
13
Sound is mono only.
Français
Auto tuning does not • The radio signal is weak. Auto tuning will only detect radio stations with a
pick up some stations. good signal. For more sensitive tuning, connect an outdoor antenna.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 21).
Italiano
Error Messages
Child Lock
• This message appears when the front panel buttons are pressed when the
child lock feature is active. See Child lock setting on page 59 for more on
switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see Recording mode on page 54).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
96k Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited because there
is no surround speaker output.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (press the MUTE button to turn the sound on).
Exit
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
SR+ Error
• Appears when there is a communication problem between the unit and the
plasma display. Check all connections and retry.
Español
Description
Nederlands
Message
67
En
XV-DV323.book 68 ページ 2004年1月13日 火曜日 午後7時57分
13
Additional information
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspects, ranging from TV programs,
which are generally 4:3, to CinemaScope
widescreen movies, with an aspect ratio of up
to about 7:3.
Set to 4:3 (Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Televisions also come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen
setting (see Video Output settings on page 49)
of this system should be set to 16:9 (Wide).
Please note that many widescreen discs
override the system’s settings so that the disc
is shown in letterbox format regardless of the
setting.
When you watch discs recorded in 4:3 format,
you can use the TV controls to select how the
picture is presented. Your TV may offer various
zoom and stretch options; see the instructions
that came with your TV for details.
Please note that some movie aspect ratios are
wider than 16:9, so even though you have a
widescreen TV, these discs will still play in a
‘letterbox’ style with black bars at the top and
bottom of the screen.
Standard TV users
If you have a standard TV, the TV Screen
setting (see Video Output settings on page 49)
of this system should be set to 4:3 (Letter Box)
or 4:3 (Pan&Scan), depending on which you
prefer.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
Tip
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3 settings
with a widescreen TV, will result in a
distorted picture.
Selecting languages using the
language code list
Some of the language options (see Language
settings on page 50) allow you to set your
preferred language from any of the 136
languages listed in the Language code list on
page 69.
1
Select ‘Other Language’.
2 Use the / (cursor left/right) buttons
to select either a code letter or a code
number.
3 Use the / (cursor up/down) buttons
to select a code letter or a code number.
See the Language code list (next page) for a
complete list of languages and codes.
68
En
XV-DV323.book 69 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
13
English
Language code list
Language (Language code letter), Language code
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swedish (sv), 1922
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Italiano
Nederlands
Español
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Portuguese (pt), 1620
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Français
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Deutsch
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Dutch (nl), 1412
Russian (ru), 1821
Chinese (zh), 2608
Korean (ko), 1115
Greek (el), 0512
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Country code list
Country, Country code, Country code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Korea, Republic of, 1118, kr
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821, ru
Singapore, 1907, sg
Spain, 0519, es
Switzerland, 0308, ch
Sweden, 1905, se
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America, 2119, us
69
En
XV-DV323.book 70 ページ 2004年1月13日 火曜日 午後7時57分
13
Additional information
Preset code list
Please note that there are cases where only certain functions may be controllable after assigning
the proper preset code, or the codes for the manufacturer in the list will not work for the model
that you are using.
ACURA 644
ADMIRAL 631
AIWA 660
AKAI 632, 635, 642
AKURA 641
ALBA 607, 639, 641, 644
AMSTRAD 642, 644, 647
ANITECH 644
ASA 645
ASUKA 641
AUDIOGONIC 607, 636
BASIC LINE 641, 644
BAUR 631, 607, 642
BEKO 638
BEON 607
BLAUPUNKT 631
BLUE SKY 641
BLUE STAR 618
BPL 618
BRANDT 636
BTC 641
BUSH 607, 641, 642, 644, 647,
656
CASCADE 644
CATHAY 607
CENTURION 607
CGB 642
CIMLINE 644
CLARIVOX 607
CLATRONIC 638
CONDOR 638
CONTEC 644
CROSLEY 632
CROWN 638, 644
CRYSTAL 642
CYBERTRON 641
DAEWOO 607, 644, 656
DAINICHI 641
DANSAI 607
DAYTON 644
DECCA 607, 648
DIXI 607, 644
DUMONT 653
ELIN 607
ELITE 641
ELTA 644
EMERSON 642
ERRES 607
FERGUSON 607, 636, 651
FINLANDIA 635, 643, 655
FINLUX 632, 607, 645, 648,
653, 654, 655
FIRSTLINE 640, 644
FISHER 632, 635, 638, 645
FORMENTI 632, 607, 642
FRONTECH 631, 642, 646
70
En
FRONTECH/PROTECH 632
FUJITSU 648, 629
FUNAI 640, 646, 658
GBC 632, 642
GE 601, 608, 607, 610, 617, 602,
628, 618
GEC 607, 634, 648
GELOSO 632, 644
GENEXXA 631, 641
GOLDSTAR 610, 623, 621, 602,
607, 650
GOODMANS 607, 639, 647, 648,
656
GORENJE 638
GPM 641
GRAETZ 631, 642
GRANADA 607, 635, 642, 643,
648
GRADIENTE 630, 657
GRANDIN 618
GRUNDIG 631, 653
HANSEATIC 607, 642
HCM 618, 644
HINARI 607, 641, 644
HISAWA 618
HITACHI 631, 633, 634, 636, 642,
643, 654, 606, 610, 624, 625, 618
HUANYU 656
HYPSON 607, 618, 646
ICE 646, 647
IMPERIAL 638, 642
INDIANA 607
INGELEN 631
INTERFUNK 631, 632, 607, 642
INTERVISION 646, 649
ISUKAI 641
ITC 642
ITT 631, 632, 642
JEC 605
JVC 613, 623
KAISUI 618, 641, 644
KAPSCH 631
KENDO 642
KENNEDY 632, 642
KORPEL 607
KOYODA 644
LEYCO 607, 640, 646, 648
LIESENK&TTER 607
LOEWE 607
LUXOR 632, 642, 643
M-ELECTRONIC 631, 644, 645,
654, 655, 656, 607, 636, 651
MAGNADYNE 632, 649
MAGNAFON 649
MAGNAVOX 607, 610, 603, 612,
629
MANESTH 639, 646
MARANTZ 607
MARK 607
MATSUI 607, 639, 640, 642, 644,
647, 648
MEDIATOR 607
MEMOREX 644
METZ 631
MINERVA 631, 653
MITSUBISHI 609, 610, 602, 621,
631
MULTITECH 644, 649
NEC 659
NECKERMANN 631, 607
NEI 607, 642
NIKKAI 605, 607, 641, 646, 648
NOBLIKO 649
NOKIA 632, 642, 652
NORDMENDE 632, 636, 651,
652
OCEANIC 631, 632, 642
ORION 632, 607, 639, 640
OSAKI 641, 646, 648
OSO 641
OSUME 648
OTTO VERSAND 631, 632, 607,
642
PALLADIUM 638
PANAMA 646
PANASONIC 631, 607, 608,642,
622
PATHO CINEMA 642
PAUSA 644
PHILCO 632, 642
PHILIPS 631, 607, 634, 656
PHOENIX 632
PHONOLA 607
PROFEX 642, 644
PROTECH 607, 642, 644, 646,
649
QUELLE 631, 632, 607, 642, 645,
653
R-LINE 607
RADIOLA 607
RADIOSHACK 610, 623, 621,
602
RBM 653
RCA 601, 610, 615, 616, 617, 618,
661, 662, 609
REDIFFUSION 632, 642
REX 631, 646
ROADSTAR 641, 644, 646
SABA 631, 636, 642, 651
SAISHO 639, 644, 646
SALORA 631, 632, 642, 643
SAMBERS 649
SAMSUNG 607, 638, 644, 646
SANYO 635, 645, 648, 621, 614
SBR 607, 634
SCHAUB LORENZ 642
SCHNEIDER 607, 641, 647
SEG 642, 646
MCMICHAEL 634
SEI 632, 640, 649
SELECO 631, 642
SHARP 602, 619, 627
SIAREM 632, 649
SIEMENS 631
SINUDYNE 632, 639, 640, 649
SKANTIC 643
SOLAVOX 631
SONOKO 607, 644
SONOLOR 631, 635
SONTEC 607
SONY 604
SOUNDWAVE 607
STANDARD 641, 644
STERN 631
SUSUMU 641
SYSLINE 607
TANDY 631, 641, 648
TASHIKO 634
TATUNG 607, 648
TEC 642
TELEAVIA 636
TELEFUNKEN 636, 637, 652
TELETECH 644
TENSAI 640, 641
THOMSON 636, 651, 652, 663
THORN 631, 607, 642, 645, 648
TOMASHI 618
TOSHIBA 605, 602, 626, 621, 653
TOWADA 642
ULTRAVOX 632, 642, 649
UNIVERSUM 631, 607, 638, 642,
645, 646, 654, 655
VESTEL 607
VICTOR 613
VOXSON 631
WALTHAM 643
WATSON 607
WATT RADIO 632, 642, 649
WHITE
WESTINGHOUSE 607
YOKO 607, 642, 646
ZENITH 603, 620
PIONEER 600, 631, 632, 607,
636, 642, 651
Additional_information.fm 71 ページ 2004年1月13日 火曜日 午後9時33分
Additional information
Analog
audio
Direct representation of sound by an
electrical signal. See also Digital audio.
A standard file format used for still
images. JPEG files are identified by the
file extension “.jpg”.
MP3
MP3 (MPEG1 audio layer 3) is a
compressed stereo audio file format.
Files are recognized by their file
extension “.mp3”.
Aspect ratio The width of a TV screen relative to its
height. Conventional TVs are 4:3;
widescreen models are 16:9.
A multi-channel audio encoding system
developed by Dolby Laboratories that
enables far more audio to be stored on a
disc than PCM encoding. See also PCM
(Pulse Code Modulation).
DRM copy
protection
DRM (digital rights management) copy
protection is a technology designed to
prevent unauthorized copying by
restricting playback, etc. of material on
devices other than the PC (or other
WMA recording equipment) used to
record it. For detailed information,
please see the instruction manuals or
help files that came with your PC (or
other WMA recording equipment) and/
or software.
DTS
PBC
(PlayBack
Control)
PCM
Digital audio encoding system found on
(Pulse Code CDs. Good quality, but requires a lot of
Modulation) data compared to Dolby Digital, DTS
and MPEG encoded audio. See also
Digital audio.
Progressive
scan video
All the lines that make up a video picture
are updated in one pass (compared to
interlace which takes two passes to
update the whole picture).
Regions
These associate DVD-Video discs and
players with particular areas of the
world. See DVD Video regions on page 61
for more information.
Sampling
frequency
The rate at which sound is measured to
be turned into digital audio data. The
higher the rate, the better the sound
quality. CD is 44.1 kHz; DVD can be up
to 96 kHz. See also Digital audio.
WMA
WMA is short for Windows Media Audio
and refers to an audio compression
technology developed by Microsoft
Corporation. Files are recognized by
their file extension “.wma”.
The difference between the quietest and
loudest sounds possible in an audio
signal.
A file format developed by Fuji Photo
EXIF
(Exchangeabl Film for digital still cameras. Digital
e Image File) cameras from various manufacturers
use this compressed file format which
carries date, time and thumbnail
information, as well as the picture data.
File
extension
A tag added to the end of a filename to
indicate the type of file. For example,
“.mp3” indicates an MP3 file.
ISO 9660
format
International standard for the volume
and file structure of CD-ROM discs.
A system of navigating a Video CD/
Super VCD through on-screen menus
recorded onto the disc.
Español
Dynamic
range
A multi-channel audio encoding system
developed by Digital Theater Systems
that enables far more audio to be stored
on a disc than PCM encoding. See also
PCM (Pulse Code Modulation).
MPEG video A video format used on Video CD/Super
VCDs and DVD discs.
Nederlands
Dolby
Digital
MPEG audio An audio format used on Video CD/
Super VCDs and some DVD discs.
Italiano
Indirect representation of sound using
numbers. See also Sampling frequency
and Analog audio.
Français
Digital
audio
Deutsch
JPEG
English
Glossary
13
Manufactured under license from Dolby
Laboratories.“Dolby”, “Pro Logic” and the doubleD symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
71
En
Additional_information.fm 72 ページ 2004年1月13日 火曜日 午後9時33分
13
Additional information
Specifications
Amplifier section
Continuous Power Output (RMS):
Argentina and Brazil models:
Front, Center, Surround . . . 90 W per channel
(1 kHz, 10 % T.H.D., 6 Ω)
Subwoofer . . .90 W (100 Hz, 10 % T.H.D., 6 Ω)
All other models:
Front, Center, Surround . . 100 W per channel
(1 kHz, 10 % T.H.D., 6 Ω)
Subwoofer . .100 W (100 Hz, 10 % T.H.D., 6 Ω)
Continuous Power Output:
Argentina and Brazil models:
Front, Center, Surround . . . 68 W per channel
(1 kHz, 1 % T.H.D., 6 Ω)
Subwoofer . . . .68 W (100 Hz, 1 % T.H.D., 6 Ω)
All other models:
Front, Center, Surround . . . 75 W per channel
(1 kHz, 1 % T.H.D., 6 Ω)
Subwoofer . . . .75 W (100 Hz, 1 % T.H.D., 6 Ω)
Disc section
Digital audio
characteristics . . . . . . . . . DVD fs: 96 kHz, 24-bit
Type . . . . . . . DVD system, video CD system and
compact disc digital audio system
Total harmonic distortion. . . . . . . . . . . . . 0.004%
Frequency
response . . . . 4 Hz to 44 kHz (96kHz sampling) /
4 Hz to 22 kHz (48kHz sampling)
Wow and Flutter . . . . . . . .Limit of measurement
(±0.001 % W.PEAK) or less (JEITA)
FM tuner section
Frequency range . . . . . . . . . . . . . 87.5 – 108 MHz
Antenna . . . . . . . . . . . . . . . . . . 75 Ω, unbalanced
AM tuner section
Frequency range
With 9kHz step . . . . . . . . 531 kHz to 1,602 kHz
With 10kHz step (Not applicable to
the European model) . . . 530 kHz to 1,700 kHz
Antenna . . . . . . . . . . . . . . . . . . . . . .Loop antenna
72
En
Miscellaneous
Power requirements
European/Singapore/South African
models . . . . . . . . . . . . AC 220-230 V, 50/60 Hz
U.K. model . . . . . . . . . . . . . AC 230 V, 50/60 Hz
Australian/New Zealand/Malaysian
models . . . . . . . . . . . . . . . . AC 240 V, 50/60 Hz
Argentina/Brazil models . . AC 220 V, 50/60 Hz
Hong Kong model . . . . . . AC 220-230 V, 50 Hz
Taiwan model. . . . . . . . . . AC 110-120 V, 60 Hz
Mexican model . . . . . . . . . AC 127 V, 50/60 Hz
Power consumption . . . . . . . . . . . . . . . . . . 175W
Power consumption in standby . . . . . . . . . 0.5 W
Dimensions . . . . 420 (W) x 70 (H) x 396 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0 kg
Accessories (DVD/CD receiver)
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6 dry cell batteries. . . . . . . . . . . . . . . . . . . . 2
Video cable (yellow plugs). . . . . . . . . . . . . . . . . . 1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . 1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setup Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
These operating instructions . . . . . . . . . . . . . . . 1
Warranty Card (European, Australian and New
Zealand models only) . . . . . . . . . . . . . . . . . . . . . 1
Speaker System (S-DV323/424)
(Front speakers x2, surround speakers x2, center
speaker x1, subwoofer x1)
Front speakers (S-DV323)
Enclosure . . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . 10x7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . 10x7 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . . 105 (W) x 158 (H) x 83 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 kg
XV-DV323.book 73 ページ 2004年1月13日 火曜日 午後7時57分
Additional information
13
Speaker cables . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Speaker setup guide. . . . . . . . . . . . . . . . . . . . . . 1
Non-slip pads (small) . . . . . . . . . . . . . . . . . . . . 20
Non-slip pads (large) . . . . . . . . . . . . . . . . . . . . . 9
Subwoofer stands. . . . . . . . . . . . . . . . . . . . . . . . 3
Front speaker covers . . . . . . . . . . . . . . . . . . . . . 2
Surround speaker bases . . . . . . . . . . . . . . . . . . 2
S-DV323 only:
Wall mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Subwoofer
Enclosure . . . . . . . . . . . . . . Bass-reflex floor type
(magnetically shielded)
System . . . . . . . . . . . . . . . . . 16 cm 1-way system
Speaker. . . . . . . . . . . . . . . . . . . . 16 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 35 Hz to 2.8 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . 108 (W) x 420 (H) x 390 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 kg
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
intended for home and other limited uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Español
Enclosure . . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . . . 7cm 1-way system
Speakers. . . . . . . . . . . . . . . . . . . . 7cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . . 105 (W) x 139 (H) x 83 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.55 kg
This product includes FontAvenue®
fonts licenced by NEC corporation.
FontAvenue is a registered trademark
of NEC Corporation.
Nederlands
Surround speakers
• Specifications and design subject to
possible modification without notice, due
to improvements.
Italiano
Enclosure . . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . 10x7 cm 1-way system
Speakers. . . . . . . . . . . . . . . . . 10x7 cm cone type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 78 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . . . 240 (W) x 87 (H) x 79 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.85 kg
Note
Français
Center speaker
Deutsch
Accessories (Speaker system)
Enclosure . . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . . . . . . . .2-way system
Woofer . . . . . . . . . . . . . . . . . . .10x7cm cone-type
Tweeter . . . . . . . . . . . . . . . . . . . 2.6cm dome-type
Nominal impedance . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum Input Power . . . . . . . . . . . . . . . .100 W
Dimensions . . . 240 (W) x 240 (H) x 962 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 kg
English
Front speakers (S-DV424)
This product is intended for household
purposes. Any failure due to use for other
than household purposes (such as longterm use for business purposes in a
restaurant or use in a car or ship) and
which requires repair will be charged for
even in the warranty period.
KO41_En
73
En
XV-DV323.book 76 ページ 2004年1月13日 火曜日 午後7時57分
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
<04A000001>
Printed in
<XRB3036-A>
Download PDF