EC-TYPE EXAMINATION CERTIFICATE 1

EC-TYPE EXAMINATION CERTIFICATE  1
1
2
EC-TYPE EXAMINATION CERTIFICATE
Equipment or Protective systems intended for use in Potentially
Explosive Atmospheres - Directive 94/9/EC
3
EC-Type Examination Certificate No:
FM09ATEX0057X
4
Equipment or protective system:
(Type Reference and Name)
MODEL 5900 RADAR LEVEL GAUGE
5
Name of Applicant:
Rosemount Tank Radar AB
6
Address of Applicant:
Gamlestadsvägen 18B
GÖTEBORG SE-40251
Sweden
This equipment or protective system and any acceptable variation thereto is specified in the schedule to this
certificate and documents therein referred to.
7
8
FM Approvals Ltd, notified body number 1725 in accordance with Article 9 of Directive 94/9/EC of 23 March
1994, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements
relating to the design and construction of equipment intended for use in potentially explosive atmospheres given
in Annex II to the Directive.
The examination and test results are recorded in confidential report number:
3035466EC dated 15 Feb 2010.
9
Compliance with the Essential Health and Safety Requirements, with the exception of those identified in item 15
of the schedule to this certificate, has been assessed by compliance with the following documents:
EN 60079-0:2012, EN 60079-11:2012 and EN 60079-26:2007, EN 60529:2013
10
If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to special
conditions for safe use specified in the schedule to this certificate.
11
This EC-Type Examination certificate relates only to the design, examination and tests of the specified
equipment or protective system in accordance to the directive 94/9/EC. Further requirements of the Directive
apply to the manufacturing process and supply of this equipment or protective system. These are not covered by
this certificate.
12
The marking of the equipment or protective system shall include:
II 1/2 G Ex ia IIC T4 Ta = -50˚C to 80˚C; IP66, IP67*
II 1/2 G Ex ia IIC T4 Ta = -50˚C to 80˚C; FISCO; IP66, IP67*
Mick Gower
cn=Mick Gower, o=FM Approvals, ou,
[email protected],
c=GB
2014.04.15 12:15:34 +01'00'
Mick Gower
Certification Manager, FM Approvals Ltd.
Issue date: 15th April 2014
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 1 of 4
SCHEDULE
to EC-Type Examination Certificate No. FM09ATEX0057X
13
Description of Equipment or Protective System:
The Model 5900 Radar Level Gauge is a continuous level transmitter that uses a microwave signal to measure
the level of a process liquid or solid.
The circuitry of the Model 5900 Radar Level Gauge circuitry is contained on four printed circuit boards and
housed within a Type 4X; IP66; IP67 housing.
The Model 5900 Radar Level Gauges uses an antenna for transmission of the signal. The maximum process
pressure rating (MWPR) is specified to be 40Bar (581psi) and 55Bar (798psi), respectively, for LPG-LNG
antenna and Cone Quartz antenna. The maximum process pressure rating (MWPR) is specified to be 20Bar
(290psi) or less for other antennas.
The Model 5900 Radar Level Gauge housing is constructed of aluminum alloy 360 or stainless steel 316. The
housing is a two compartment housing separated with a dividing wall with a feed-through employed for power
and signal routing. A thread on cover encloses the terminal while a flat cover is bolted to the electronics
compartment. The terminal compartment, has two, ½-14 NPT, conduit entries for field wiring purposes. Exiting
the electronics compartment is the connection for radar probe assemblies.
The Model 5900 Radar Level Gauges have an ambient operating temperature range of -50°C to +80°C.
5900abcdefghijklmno. Radar Level Gauge.
Energy Limitation Parameters:
Ui = 30V, Ii = 300mA, Pi = 1.3W, Ci = 1.1nF, Li = 1.5µH.
FISCO Limitation Parameters:
Ui = 17.5V, Ii = 380mA, Pi = 5.32W, Ci = 1.1nF, Li = 1.5µH.
a = Performance: Any two characters.
b = Safety Certification: Any single character.
c = Redundancy: 2, F, 1 or Z.
d = Communication: F or Z.
e = Certification: I1, KA, KB, KC, or ZZ.
f = Custody Transfer Type Approval: Any single character.
g = Level Measurement: Any single character.
h = Housing: A, S or Z.
i = Cable/Conduit Connections: 1, 2, G, E, M or Z.
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 2 of 4
SCHEDULE
to EC-Type Examination Certificate No. FM09ATEX0057X
j = Antenna:
1A
1P
5, 6, 8, A F or X
or B
l = Antenna Material: S
S
8 or X
S
G1 or
G2
A, B, D
or X
S
m = Tank Seal:
PF
PV
QA
WE or
CL
8A, 8Z, 4A, 4B, 3A, 3B,
LA, LZ 4C, 6A, 4A, 4B,
or XX
6B, 6C, 6A, 6B,
8A, 8B 8A, 8B,
or XX
AA, BA,
IA, IB,
JA, JB,
KA, KB,
LA, LB,
00 or XX
0 or X 0, V or 0, 1, 2, 3
X
or X
k = Antenna Size:
FF or
HH
n = Tank Connection: 5A, 6A,
8A, AA,
BA, KA,
LA, MB
or XX
o = Special:
14
0, C or X 0 or X
1H
1C
1F
11
12
ZZ
3, 4, 6,
8, A or X
S, H, T,
M or Y
PV, PK,
QV or
QK
4, 6, 8, A 2, 0, 3, 4 3, 4, 6, 8 Z
or X
or X
or X
S
S
S
Z
PV, PK,
QV or
QK
PV, PK,
QV or
QK
PV, PK,
QV or
QK
ZZ
4A, 6A,
8A, AA,
4X, 6X,
8X, AX,
JA, KA,
LB, MB,
JX, KX,
LX, MX,
00 or XX
2A, 2B,
3A, 3B,
4A, 4B,
HB, IA,
IB, JA,
JB, 00 or
XX
3A, 3B, ZZ
4A, 4B,
6A, 6B,
8A, 8B,
IA, IB,
JA, JB,
KA, KB,
LA, LB,
00 or XX
0 or X
1 or X
0, 1, 2,
3, 4 or X
Z
Special Conditions for Safe Use:
1. The enclosure contains aluminum and is considered to present a potential risk of ignition by impact or
2.
3.
15
friction. Care must be taken during installation and use to prevent impact or friction.
Parabolic and Array antennas with plastic surfaces may, under certain extreme conditions, generate an
ignition-capable level of electrostatic charge for IIC applications. Therefore, when these antennas are
used in Category 1G, Group IIC, appropriate measures must be taken to prevent electrostatic discharge.
*Category 1/2 notation: The Rosemount 5900 Radar Level Gauge was evaluated so that an [ib]
associated apparatus can connect to it restricting the installation of the electronics to a Zone 1 location
while still allowing the antenna to enter a Zone 0 location.
Essential Health and Safety Requirements:
The relevant EHSRs that have not been addressed by the standards listed in this certificate have been identified
and assessed in the confidential report identified in item 8.
16
Test and Assessment Procedure and Conditions:
This EC-Type Examination Certificate is the result of testing of a sample of the product submitted, in
accordance with the provisions of the relevant specific standard(s), and assessment of supporting
documentation. It does not imply an assessment of the whole production.
Whilst this certificate may be used in support of a manufacturer’s claim for CE Marking, FM Approvals Ltd
accepts no responsibility for the compliance of the equipment against all applicable Directives in all
applications.
This Certificate has been issued in accordance with FM Approvals Ltd’s ATEX Certification Scheme.
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 3 of 4
SCHEDULE
to EC-Type Examination Certificate No. FM09ATEX0057X
17
Schedule Drawings
A list of the significant parts of the technical documentation is annexed to this certificate and a copy has
been kept by the Notified Body.
18
Certificate History
Details of the supplements to this certificate are described below:
Date
Description
1st March 2010
Original Issue.
3rd September, 2010
28th November 2013
25th March 2014
Supplement 1:
Report Reference: 3035466rev102805 dated 23rd August, 2010
Description of the Change:
1. Update to reference manual.
2. Modifications to terminal blocks related to EMC performance.
3. Addition of coating/encapsulation specification.
Supplement 2:
Report Reference: 3049398 dated 15th November 2013
Description of the Change:
1. Reassessment to the latest editions of EN standards noted in item 9 of the
schedule to this certificate.
2. Removal of “S” from the model code “5900Sabcdefghijklmno” to allow for
greater Ex code flexibility.
3. Documentation updates and minor changes to the product not affecting
compliance.
Supplement 3:
Report Reference: – 3035492rev140317 dated 25th March 2014.
Description of the Change: Added an option for additional printed circuit board
conformal coating type, HumiSeal 1B73 and HumiSeal 1B31.
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: [email protected] www.fmapprovals.com
F ATEX 020 (May/12)
Page 4 of 4
Blueprint Report
Rosemount Tank Radar AB (1000003453)
Class No
3610
Rosemount Tank Radar AB (1000003453)
Class No
3610
Original Project I.D.
Certificate I.D.
3035466
FM09ATEX0057X
Drawing No.
Revision Level
Drawing Title
Last Report
Electronic Drawing
300520EN
CA
Reference Manual Rosemount 5900 Series
3049398
Yes (pdf)
9240040-909
1
APPV. DWG. 1/2" NPT PLUG
3035466
Yes (pdf)
9240040-913
2
APPR. DWG. FM
3049398
Yes (pdf)
9240040-914
1
APPR. DWG. FM PCB PM
3035466
Yes (pdf)
9240040-915
2
APPR. DWG. FM PCB CM
3049398
Yes (pdf)
9240040-916
1
APPR. DWG. FM PCB RM
3035466
Yes (pdf)
9240040-917
2
SYSTEM CONTROL DRAWING FM
3049398
Yes (pdf)
9240040-919
1
APPR. DWG. FM PARABOLIC ANTENNA
3035466
Yes (pdf)
9240040-922
1
APPR. DWG. FM ARRAY ANTENNA
3035466
Yes (pdf)
9240040-923
1
APPR. DWG. FM HORN ANTENNA
3035466
Yes (pdf)
9240040-924
2
APPR. DWG. FM LPG ANTENNA
3049398
Yes (pdf)
9240040-925
2
APPR. DWG. FM PCB TB STANDARD
05/28/10
Yes (pdf)
9240040-926
2
APPR. DWG. FM PCB TB TWO-IN-ONE
05/28/10
Yes (pdf)
9240040-928
2
APPR. DWG. FM PCB TB SIL
05/28/10
Yes (pdf)
9240040-930
2
APPR. DWG. FM SIMPL. CAP. MODEL
3049398
Yes (pdf)
9240040-931
1
APPR. DWG. FM BLOCK DIAGRAM
3035466
Yes (pdf)
9240040-932
1
APPR. DWG. FM CONE/PIPE ANTENNA
3035466
Yes (pdf)
9240040-933
1
APPR. DWG. FM RM MECH ASSY
3035466
Yes (pdf)
9240040-934
1
APPR. DWG. FM CONE/PURGING ANTENNA
3035466
Yes (pdf)
9240040-939
2
APPR. DWG. FM MAIN LABEL
3049398
Yes (pdf)
9240040-946
2
APPR. DWG. FM CONF. COAT./ENCAPSUL.
05/28/10
Yes (pdf)
9240040-947
03
APPR. DWG. FM CONFORMAL
140317
Yes (pdf)
9240040-970
2
5900S Model Code Description
3049398
Yes (pdf)
D7000001-674
1
APPR. DWG. FM 5900 SERIES, 2930 ANTENNA
3049398
Yes (pdf)
D7000001-675
1
APPR. DWG. FM 5900 SERIES, TCC/6 ANTENNA
3049398
Yes (pdf)
4/7/2014
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement