Sony NSC-GC1 User manual
Sony NSC-GC1 is a powerful and versatile camera that allows you to capture stunning images and videos with ease. With its advanced features and user-friendly design, the NSC-GC1 is perfect for both novice and experienced photographers alike.
Some of the key features of the Sony NSC-GC1 include:
- 10.1-megapixel CCD sensor for high-quality images
- 3x optical zoom lens for getting closer to your subjects
- 2.7-inch LCD screen for easy viewing and composition
- Optical SteadyShot image stabilization to reduce blur caused by camera shake
- Face Detection technology for perfect portraits
- Smile Shutter technology to automatically capture smiles
- STAMINA battery for long-lasting shooting
With its compact size and lightweight design, the Sony NSC-GC1 is easy to take with you wherever you go. And with its intuitive controls, you'll be able to capture beautiful photos and videos with just a few simple steps.
Advertisement
Advertisement
Network Sharing Camera
Handbook
NSC-GC1/GC3
VCLICK!
Table of contents
Getting started
Basic Operations
Using functions for shooting
Using functions for viewing
Customizing the settings
Viewing images on a TV
Troubleshooting
Others
Index
© 2007 Sony Corporation 3-272-527-11(1)
GB
Notes on using your camera
2
Types of “Memory Stick” that can be used (not supplied)
The IC recording medium used by this camera is a “Memory Stick Duo”.
“Memory Stick Duo”: you can use a
“Memory Stick Duo” with your camera.
“Memory Stick”: you cannot use a
“Memory Stick” with your camera.
• Do not attach a label or the like on a “Memory
Stick Duo” or a Memory Stick Duo Adaptor.
Other memory cards cannot be used.
• For details on “Memory Stick Duo”, see page 77.
When using a “Memory Stick Duo” with
“Memory Stick” compatible equipment
You can use the “Memory Stick Duo” by inserting it into the Memory Stick Duo
Adaptor (not supplied).
Memory Stick Duo Adaptor
Notes on the battery
• Charge the built-in battery before using the camera for the first time.
• The battery can be charged even if it is not completely discharged. Also, even if the battery is not fully charged, you can use the partially charged capacity of the battery as is.
• If you do not intend to use the camera for a long time, use up the existing charge and store the camera in a cool, dry place. This is to maintain the battery functions.
• For details on the battery, see page 79.
No compensation for contents of the recording
• The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
Internal memory and “Memory Stick
Duo” back up
• Do not turn off the camera or remove “Memory
Stick Duo” while the access lamp is lighted, as the internal memory data or “Memory Stick
Duo” data may be destroyed. Always protect your data by making a back up copy.
About changing the language setting
• The on-screen displays in each local language are used for illustrating the operating procedures. Change the screen language before
using your camera if necessary (page 19).
Notes on recording/playback
• This camera is neither dust-proof, nor splashproof, nor water-proof.
• Before you record one-time events, make a trial recording to make sure that the camera is working correctly.
• Be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable.
• Do not aim the camera at the sun or other bright light. This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera.
• Do not use the camera near a location that generates strong radio waves or emits radiation.
The camera may not be able to record or play back properly.
• Using the camera in sandy or dusty locations may cause malfunctions.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. In addition to malfunctions and an inability to record images, this may render the recording medium unusable, or cause image data breakdown, damage or loss.
Notes on using your camera
• Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
• When connecting your camera to another device with a cable, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of your camera.
• Movies other than those shot, edited or composed on this camera cannot be played back.
Notes on the LCD screen and the lens
• The LCD screen is manufactured using extremely high-precision technology so over
99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen or the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way.
On image data compatibility
• This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and
Information Technology Industries
Association).
• Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
Warning on copyright
• Television programs, films, videotapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
About this Handbook
• The photographs used as examples of pictures in this Handbook are reproduced images, and are not actual images shot using this camera.
• Design and specifications of recording media and other accessories are subject to change without notice.
Black, white, red, blue or green points
• Exposing the LCD screen or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors.
• Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction.
• Images may trail across on the LCD screen in a cold location. This is not a malfunction.
Note on disposal/transfer
• When using software embedded in the camera, personal information such as IDs and mail addresses may be saved on the internal memory of the camera. When transferring the camera to others or on disposal, do so after deleting the information input.
3
4
How to handle the camera
•
When carrying the camera, close the LCD panel as illustrated.
•
Be careful not to block the lens or the flash with your finger when shooting.
•
Do not hold the camera by only holding the LCD panel.
Table of contents
Notes on using your camera .....................................................................2
How to handle the camera ........................................................................4
Getting started
Checking the accessories supplied .........................................................14
1 Charging the built-in battery .................................................................15
2 Inserting a “Memory Stick Duo” (not supplied).....................................17
3 Turning the camera on/setting the clock...............................................18
Basic Operations
Selecting the image size according to use ..............................................20
Select images to upload on a website (Sharemark)................................32
Using the menu items..............................................................................34
Using functions for shooting
Camera: Selecting a camera mode
Color Mode: Changing the vividness of the image or adding special effects
EV: Adjusting the light intensity
White Bal: Adjusting the color tones
ISO: Selecting a luminous sensitivity
P.Quality: Compression rate of still images
REC Mode: Selecting the continuous shooting method
Flash Level: Adjusting the amount of flash light
Saturation: Adjusting the saturation
Sharpness: Adjusting the sharpness
Setup: Selecting the shooting settings
5
6
Table of contents
Using functions for viewing
Viewing menu
..................................................................................... 44
(Folder): Selecting the folder for viewing images
(Protect): Preventing accidental erasure
DPOF: Adding a Print order mark
(Print): Printing images using a printer
(Slide): Playing back a series of images
(Resize): Changing the image size of a recorded image
(Rotate): Rotating a still image
Customizing the settings
Using Setup items
............................................................................... 54
1
Memory Stick Tool ............................................................................ 56
Internal Memory Tool........................................................................ 58
2
Viewing images on a TV
Viewing images on a TV ......................................................................... 64
Table of contents
Troubleshooting
Warning indicators and messages ..........................................................74
Others
To use your camera abroad — Power sources........................................76
On the “Memory Stick” ............................................................................77
Index
7
8
Identifying parts
See the pages in parentheses for details of operation.
5 6 7 8
9
0 qa qs qd qf qg qh qj qk ql w; wa ws wdwf
A Speaker
B Lens
D Microphone wg wh wj wk
F /CHG: Flash charging lamp (26)/
G
(Play mode) lamp (green)
H
(Rec mode) lamp (green)
J Control button
K Multi-selector (v/V/b/B) (18)
L For shooting: Zoom (W/T) button (26)
For viewing: / (Playback zoom) button/
P Jack cover
Identifying parts
Q
• Used when connecting to a computer with a
USB cable or to a printer by PictBridge.
• NSC-GC3: You cannot input signals to your camera through this jack.
• Used when connecting to a TV, etc. with an
A/V connecting cable.
• Used when connecting with the AC adaptor to charge the battery or to operate the camera by AC power.
V
(Screen display switch) button (25)
W RESET button
• Resets power. Date and settings will not be reset to default settings.
X
(Image Size/Delete) button (20,
Y Tripod receptacle (bottom)
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having screws longer than 5.5 mm (7/32 inch), and may damage the camera.
Z “Memory Stick Duo” cover (17)
wj “Memory Stick Duo” slot
9
10
Indicators on the screen
Each time you press (Screen display switch) button, the display changes
See the pages in parentheses for details of operation.
In shooting standby
3
1
2
4
When recording movies
+2.0EV
640 30f
00:00:05
5
A
Display Indication
P
Camera mode (Scene
WB
Camera mode (Program)
ISO400
B&W SEPIA
VIVID
Color mode
E
B
Display
FINE STD
[400]
Indication
Red-eye reduction
Flash charging
Image size
Still image shooting mode
Remaining number of
• Pressing MENU switches the menu/guide menu on/ off.
Indicators on the screen
C
Display Indication
Recording folder
• This does not appear when using internal memory.
Recording Media
Histogram
D
Display
+2.0EV
[00:28:25]
Indication
Image size
Exposure Value
Remaining recordable
Movie recording mode
E
Display
+2.0EV
00:00:05
Indication
Exposure Value
Movie recording
11
12
Indicators on the screen
When playing back movies
1
2
When playing back still images
1
2
3
3
+2.0EV
4
A
Display Indication
/
/ /
Image size
00:00:00
Playback/Stop/Slide Show
Fast forward/ Rewind
Counter
E
PictBridge connecting
Zoom scaling
PictBridge connecting
• Do not disconnect the USB cable while the icon is displayed.
B
Display
101_0012
2007 1 1
9:30 AM
BACK/
NEXT
VOLUME
DPOF
Indication
Playback bar
Recorded date/time of the playback image
Select images
Adjust volume
Indicators on the screen
C
Display Indication
12/12
• This does not appear when using internal memory.
Playback folder
• This does not appear when using internal memory.
Image number/Number of images recorded in selected folder
Playback Media
Recording mode
Print order (DPOF) mark
Protect
Histogram
• appears when histogram display is disabled.
D
Display Indication
Flash
WB
White balance
Shutter speed
2000
F3.5
ISO400
+2.0EV
Aperture value
Exposure Value
13
14
Getting started
Checking the accessories supplied
• AC Adaptor UPA-AC05 (1)/
Power cord (mains lead) (1)
• USB cable (1)
• Hand strap (1)
• A/V connecting cable (1)
Attach the strap and place your hand through the loop to prevent the camera from damage by being dropped, etc.
• CD-ROM “Net-sharing CAM Application
Software” (1)
– Picture Motion Browser (Software)
– Picture Motion Browser Guide
– Network Sharing Camera Handbook (PDF)
• Instruction Manual (1)
Hook
1 Charging the built-in battery
1
Insulation sheet
/CHG lamp
AC Adaptor
3
2
DC IN jack
Power cord (mains lead)
•
The battery is built in within the camera.
1
Remove the insulation sheet.
2
Connect the AC Adaptor to the DC IN jack of the camera, making sure the power is off.
3
Plug the power (mains lead) cord to a wall outlet (wall socket).
• The /CHG lamp lights on, and charging starts.
When the /CHG lamp turns off, charging is finished (Practical charge).
If you continue charging the battery for about one more hour (until it is fully charged), the charge will last slightly longer.
15
16
1 Charging the built-in battery
Charging time
Full charge time
Approx. 120 min.
• Time required to charge a fully depleted battery at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.
• See page 22 for the number of images that can be recorded.
• Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by.
• Even if the /CHG lamp is not lit, the AC Adaptor is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the AC
Adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket).
To check the remaining battery time
Press POWER button to turn on and check the remaining battery on the LCD screen.
Battery remaining indicator
Battery remaining guidelines
Sufficient power remaining
Battery almost fully charged
Battery half full
Battery low, recording/ playback will stop soon.
Charge the battery.
(The warning indicator flashes.)
• It takes about one minute until the correct battery remaining indicator appears.
• The displayed battery remaining indicator may not be correct under certain circumstances.
• The Clock Set screen appears when the camera is turned on for the first time (page 18).
2 Inserting a “Memory Stick Duo” (not supplied)
1 “Memory Stick Duo” cover 2 Insert the “Memory Stick Duo” all the way in as shown in the illustration until it clicks.
1
Open the “Memory Stick Duo” cover.
2
Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks.
3
Close the “Memory Stick Duo” cover.
When there is no “Memory Stick Duo” inserted
The camera records/plays back images using the internal memory (approx. 4 MB).
To remove “Memory Stick Duo”
Open the “Memory Stick Duo” cover.
Make sure that the access lamp is not lit, then push the “Memory
Stick Duo” in once.
• Never remove “Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the
“Memory Stick Duo”.
17
3 Turning the camera on/setting the clock
1 LCD screen
1 POWER button
2
Multi-selector
MENU button
Tilt the Multi-selector side to side and up and down to select, and press the center to set the setting.
/ / :
1
Open the LCD panel to turn the power on.
• Open and lift the LCD panel up to a 90 degrees angle from the camera (1), then rotate it to the desired angle (2).
2
180 degrees (max.)
1
90 degrees (max.)
2
90 degrees (max.)
• You can also turn the power on by pressing POWER button.
2
Set the clock with the Multi-selector.
1 Select the date display format with v/V.
2 Select each item with b/B and set the numeric value with v/V.
3 Select [OK].
18
To turn the power off
Press POWER button.
To change the date and time
Press MENU, and select [Clock Set] in
2
3 Turning the camera on/setting the clock
When you turn on the power
If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery (Auto poweroff function).
Changing the language settings
You can change the on-screen displays to show messages in a specified language. To select the screen language, press MENU, and select [ Language] in
1
19
20
Basic Operations
Selecting the image size according to use
(Rec mode) lamp
MODE button
Multi-selector
(Image Size) button
1
Press MODE to set the camera to recording mode.
• (Rec mode) lamp lights up.
2
Press (Image Size) button.
3
Select (Photo Size) or
(Movie Size) with b/B on the Multi-selector,
then select the desired image size with v/V.
Photo size Movie size
• Recommended use and number of remaining shots are displayed on the upper part of the LCD screen.
4
Press (Image Size) to complete the setting.
Selecting the image size according to use
The default settings are marked with .
Movie image size Frame/Second Usage guidelines
640(30fps) (640×480)
320(30fps) (320×240)
Approx. 30*
Approx. 30*
Shoot high quality movies in sizes suited for display on TV
Shoot high quality movies in sizes suited for display on websites
Shoot at a small size for e-mail attachment 320(15fps) (320×240) Approx. 15*
* The darker the subject, the lower the frame per second.
• The larger the image size, the higher the image quality.
• The more frames per second you played back, the smoother playback can be.
• “fps” indicates the number of frames per second (Frame Per Second). The actual number of image recordable may differ depending on the shooting situations and the subject.
Image size
5M (2592
×1944)
3:2
*
(2592
×1728)
3M (2048
×1536)
2M (1632
×1224)
VGA (640×480)
Guidelines
For prints up to A4 (8
×10")
Shoot in 3:2 aspect ratio
For prints up to 10
×15 cm (4×6") or 13×18 cm (5×7")
For prints up to 10
×15 cm (4×6")
Shoot at a small image size for e-mail attachment
* Images are recorded in 3:2 aspect ratio, same as photograph printing paper or postcards, etc.
Selecting the image quality (compression ratio) in combination (page 41)
You can select the compression ratio when digital images are saved. When you select a high compression ratio, the image lacks the fineness of detail, but has a smaller file size.
21
Selecting the image size according to use
22
Recording time of movies and number of still images
The length of time for movies and the number of still images may vary depending on the shooting conditions.
The approximate recording time of movies
Size
Capacity
640(30fps)
320(30fps)
320(15fps)
(Units: hour : minute : second)
Internal memory
“Memory Stick Duo” formatted with this camera
Approx.
4 MB
128 MB 256 MB 512 MB 1 GB 2 GB 4 GB 8 GB
0:00:10 0:05:50 0:10:00 0:22:00 0:44:00 1:30:00 3:00:00 6:05:00
0:00:35 0:19:00 0:34:00 1:10:00 2:20:00 4:55:00 9:40:00 19:30:00
0:01:50 1:05:00 2:00:00 4:05:00 8:20:00 17:00:00 34:00:00 68:00:00
• The shooting mode will automatically stop in either of the following situations.
– When the file size of the movie being recorded exceeds 2 GB.
– After the maximum shooting duration time* for each file has passed.
* NSC-GC1: 2 hours, NSC-GC3: 29 minutes
The approximate number of still images
Capacity
Size/Quality
5M Fine
Standard
3:2 Fine
Standard
3M Fine
Standard
2M Fine
Standard
VGA Fine
Standard
(Units: Images)
Internal memory
Approx.
4 MB
1
3
3
5
1
3
25
40
5
8
50
95
50
95
80
145
130
245
780
1850
“Memory Stick Duo” formatted with this camera
128 MB 256 MB 512 MB
95
180
95
180
155
280
235
445
1500
3600
190
360
190
360
305
560
480
900
1 GB
390
730
390
730
620
1100
980
1850
2 GB
790
1500
790
1500
1250
2300
2000
3750
4 GB
1550
2900
1550
2900
2500
4400
4000
7500
8 GB
3100
7000
3100
7000
5000
11500
8000
18000
2950 6000 12000 23500 48000
7100 14500 29500 59000 115000
• The number of images listed is for when [REC Mode] is set to [Normal].
• When the number of remaining shootable images is greater than 9,999, the “>9999” indicator appears.
• When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.
• The image quality is [Fine] on the upper row and [Standard] on the lower row (page 41).
Selecting the image size according to use
• All numbers measured when using a “Memory Stick Duo” made by Sony Corporation. The number of still images and the length of time for movies may vary depending on the shooting conditions and the recording mediums.
• When measuring media capacity, 1 GB equals 1 billion bytes, a portion of which is used for data management.
23
Shooting images
Focus range switch
(Rec mode) lamp
MODE button
Self-timer button
Multi-selector
Zoom button
MOVIE button
PHOTO button
POWER button
(Screen display switch) button
MENU button
Flash button
1
Open the LCD panel to turn the power on.
• You can also turn the power on by pressing POWER.
2
Make sure the (Rec mode) lamp lights up.
3
Confirm the composition.
Position the subject in the center of the screen.
24
4
Start shooting.
When shooting movies:
Press MOVIE.
To stop recording, press MOVIE again.
When shooting still images:
Press PHOTO.
Movies Still images
101
5M
[ 400]
+2.0EV
• When shooting movies, the angle of view will change from when shooting still images.
Shooting images
• The shooting mode will automatically stop in either of the following situations.
– When the file size of the movie being recorded exceeds 2 GB.
– After the maximum shooting duration time* for each file has passed.
* NSC-GC1: 2 hours, NSC-GC3: 29 minutes
• When shooting movies, the anti-blur function will be set on.
Changing the screen display
(Screen display switch) button
Each time you press the (Screen display switch) button, the display changes as follows.
Histogram on*
Indicators off
Indicators on
* During playback, the image information is displayed.
• By pressing (Screen display switch) button longer, you can increase the LCD backlight.
• If you view images in bright outside light, adjust the brightness of the LCD backlight up.
However, the battery power may decrease faster under such condition.
• The LCD screen will not display while the camera is connected to a TV.
• The histogram does not appear in the following situations:
While shooting
– When the menu is displayed.
– When recording movies
During playback
– When the menu is displayed.
– In index mode
– When you are using playback zoom.
– When you are rotating still images.
– During playback of movies
• A large difference in the histogram displayed when shooting and during playback may occur when:
– The flash strobes.
– The shutter speed is slow or fast.
• The histogram may not appear for images recorded using other cameras.
25
26
Shooting images
Useful functions for shooting
W/T
Using the zoom
Press T to zoom, press W to undo the zoom.
• This camera is only capable of digital zoom.
Shooting a still image while shooting movies
When you press PHOTO while shooting movies, the same picture as the movie being shot will be recorded as a still image. The size of the still image recorded will be the same as the size of the movie.
Close-up mode
Slide the Focus range switch to (Close-up) when shooting a subject close-up.
: Normal shooting (Approx. 1.0 m or farther (3 feet 3 3/8 inches or farther))
: Close-up shooting (Approx. 60 cm to 1.0 m (1 feet 11 5/8 inches to 3 feet 3 3/8 inches))
• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.
Flash (Selecting a flash mode for still images)
Press button repeatedly until the desired icon is displayed on the LCD screen.
(No indicator): Flash Auto
Strobes when there is insufficient light or backlight (default setting).
:
Flash forced on
:
Slow synchro (Flash forced on)
The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.
: Flash forced off
• The flash strobes twice. The first time is to adjust the light quantity.
• While charging the flash, /CHG lamp lights on and is displayed.
Shooting images
Using the self-timer
Press (Self-timer) button.
(No indicator): Not using the self-timer
: Using the self-timer
If you press PHOTO, countdown timer is displayed, and after rapid beep sounds are heard, the camera will shoot.
To cancel, press again.
27
28
Viewing images
(Play mode) lamp
(Playback zoom)/ (Index) button
POWER button
MODE button
Multi-selector
MENU button
1
Open the LCD panel to turn the power on.
• You can also turn the power on by pressing POWER.
2
Press MODE to set the camera to playback mode.
• (Play mode) lamp lights up.
3
Plays back movies or still images.
Movie:
Press the Multi-selector to playback a movie. (Press it again to stop playback.)
Press
B
to fast forward, b to rewind
. (Press the Multi-selector to return to normal playback.)
Press V to display the volume control screen, then adjust the volume with v/V .
• Movies with the image size [320(30fps)] or [320(15fps)] are displayed a size smaller.
Still image:
• Select an image with b/B on the Multi-selector.
/
To view an enlarged image (playback zoom)
Press while displaying a still image.
To undo the zoom, press .
Adjust the position: v/V/b/B
Cancel playback zoom: Press the Multi-selector.
Viewing images
Viewing an index screen
Press (Index) to display the index screen while a still image is displayed.
Select an image with v/V/b/B on the Multi-selector.
To return to the single image screen, press the Multi-selector.
To display the next (previous) index screen, move the yellow frame up/down/left/right with v/
V/b/B.
V
29
30
Deleting images
(Play mode) lamp
(Index) button
MODE button
Multi-selector
MENU button
(Delete) button
1
Press MODE to set the camera to playback mode.
2
Press (Delete) while display in single-image mode or in index mode.
3
Select [Delete] with v on the Multi-selector.
To cancel the deletion
Select [Exit] with v/V.
Deleting images
To delete images in index mode
1
While an index screen is displayed, press
Multi-selector.
(Delete) and select [Select] with b/B on the
2 Select the images you want to delete with v/V/b/B, then press the Multi-selector to display the
(Delete) indicator on the selected image.
3
Press
4
Select [OK] with B.
• To delete all the images in the folder, select [All In This Folder] with b/B in step 1 instead of [Select].
To cancel a selection
Select an image you have previously selected for deletion, then press the Multi-selector to delete the indicator from the image.
31
Select images to upload on a website
(Sharemark)
(Play mode) lamp
MODE button
Multi-selector
(Sharemark) button
1
Press MODE to set the camera to playback mode.
• (Play mode) lamp lights up.
2
Select images to upload on a website and press (Sharemark) button.
Selecting images in Single Image mode:
Select [ mark] with v/V on the Multi-selector.
• To cancel, select [Exit].
• Move on to the previous image or the next image with b/B.
Selecting images in Index Display mode:
Select how to mark [ mark] either from [All In This Folder] or [Select].
32
When selecting [All In This Folder]:
will be marked on all of the images within the selected file.
When selecting [Select]:
Select images to mark Sharemark. will be marked on the images selected.
Select images to upload on a website (Sharemark)
Removing Sharemarks
To remove the Sharemark from an image, select the image to remove the Sharemark and take the same steps as when marking a Sharemark on an image.
• By using the software “PMB Portable” embedded in the camera, you can easily upload images marked with Sharemarks. For details, see Help in the “PMB Portable”.
• When connecting to the network service, the page will be redirected by the server of Sony to the URL entered in the network service setting.
• When uploading images via Internet, including this product, note that depending on the Internet service provider, the cache may remain within the computer used.
33
34
Using the menu items
Multi-selector
MENU button
1
Press MENU to display the menu.
• The menu will be displayed only during shooting and playback mode.
• Different items will become visible depending on the selected mode.
2
Select the desired menu item with b/B on the Multi-selector.
Auto
• In REC mode, / is indicated. You cannot set an item with / indicator in gray.
• In PLAY mode, press the Multi-selector after setting an item.
3
Select a setting with v/V.
4
Press MENU to turn off the menu.
Menu items
The available menu items vary depending on the camera mode.
The shooting menu is available only in the shooting mode, and the viewing menu is available only in the playback mode.
Only the available items are displayed on the screen.
( : available)
Menu for shooting
Auto
PHOTO
Program
PHOTO/MOVIE
Scene
MOVIE
Camera
Color Mode
EV
White Bal
ISO
P.Quality
REC Mode
Flash Level
Saturation
Sharpness
Setup
—
—
—
—
—
—
—
—
—
—
—
*
*The operation is limited according to the selected Scene Selection mode (page 38).
Menu for viewing
(Folder)
(Slide)
(Rotate)
(Setup)
(Protect)
(Print)
(Resize)
(Divide)
—
—
—
—
—
—
35
36
Using functions for shooting
Shooting menu
The function is shooting mode using MENU button are described below. For details on how to
operate the menu, see page 34.
You cannot select the mode displayed in gray.
PHOTO
MOVIE
Available
Unavailable
The default settings are marked with .
When the mode has been set to PLAY, switch it to REC with MODE.
Shooting menu
For details on the operation 1 page 34
Camera: Selecting a camera mode
PHOTO MOVIE
The following modes are predetermined to match the scene conditions.
Scene Selection
Twilight*
Allows you to shoot night scenes at far distance without losing the darkness atmosphere of the surroundings.
Soft snap
Allows you to shoot images with a softer atmosphere for portraits of people, flower, etc.
High-speed shutter
Shoots moving subjects outdoors or in other bright places.
Snow
When shooting snowy scenes or other places where the whole screen appears white, use this mode to prevent sunken colors and record clear images.
Candle
Shoot candlelit scenes, without spoiling the atmosphere.
Twilight portrait*
Suitable for shooting portraits in dark places.
Allows you to shoot sharp images of people in dark places without losing the dark atmosphere of the surroundings.
Landscape
Focuses only on a distant subject to shoot landscapes, etc.
Beach
When shooting seaside or lakeside scenes, the blue of the water is clearly recorded.
Fireworks*
Allows you to record fireworks in all their splendor.
Program
Adjustments necessary for shooting are made automatically, but you can also make adjustments of EV, etc., as desired. In addition, you can also set the desired shooting functions using menus.
You can shoot images in Auto adjustment mode.
Auto
*The shutter speed becomes slower, so using a tripod is recommended.
37
38
Shooting menu
For details on the operation 1 page 34
Functions you can use in Scene Selection
For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. Some functions are not available, depending on the
Scene Selection mode.
( : you can select the desired setting)
Flash* EV White Balance Burst/Bracket
—
—
Flash Level
—
/
/
/
/
—
—
* When shooting a movie, you cannot use the functions.
Color Mode: Changing the vividness of the image or adding special effects
You can change the brightness of the image, accompanied by effects.
B&W (B & W) Sets the image to monochromatic color.
PHOTO
—
—
MOVIE
SEPIA (Sepia)
Sets the image to sepia color.
Shooting menu
VIVID (Vivid)
For details on the operation 1 page 34
Sets the image to bright and deep color.
Off
No effect.
• When shooting a movie, [Vivid] will be ineffective even if set.
EV: Adjusting the light intensity
Manually adjusts the exposure.
PHOTO MOVIE
Toward –
+2.0EV
0EV
–2.0EV
Toward +
Toward +: Brightens an image.
The exposure is determined automatically by the camera.
Toward –: Darkens an image.
• The compensation value can be set in 1/3EV increments.
• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective.
z Adjusting EV (Exposure Value) by displaying a histogram
A histogram is a graph showing the brightness of an image. Press (Screen display switch)
A
Dark
B
Bright repeatedly to display the histogram inside the screen. The graph display indicates a bright image when skewed to the right side, and a dark image when skewed to the left side. When shooting still images, adjust EV while checking the exposure with the histogram.
A
Number of pixels
B Brightness
• The histogram also appears in the following cases, but you cannot adjust the exposure.
– When [Camera] is set to [Auto]
– When playing back a single image
39
40
Shooting menu
For details on the operation 1 page 34
White Bal: Adjusting the color tones
PHOTO MOVIE
Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of an image look strange.
WB
(Flash)
Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
n
(Incandescent) Adjusts for places under incandescent lamp, or under bright lighting, such as in a photo studio.
(Fluorescent)
Adjust for fluorescent lighting.
(Cloudy) Adjusts for a cloudy sky or a shady location.
(Daylight)
Adjusts for conditions outside under a clear sky, at sundown, night scenes, the presence of neon signs or fireworks.
Shooting menu
For details on the operation 1 page 34
Auto
Adjusts the White Balance automatically.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you select [Fluorescent].
• Except in [Flash] modes, [White Bal] is set to [Auto] when the flash strobes.
• Some options are not available depending on the Scene Selection mode (page 38).
ISO: Selecting a luminous sensitivity
PHOTO MOVIE
Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity.
400
200
100
80
Auto
Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality.
• Note that the image tends to become noisier as the ISO sensitivity number increases.
• [ISO] is set to [Auto] in the Scene Selection mode.
• When shooting under brighter conditions, the camera automatically increases its tone reproduction and helps prevent images to become whitish (excluding when [ISO] is set to [100]).
P.Quality: Compression rate of still images
Selects the still image quality.
FINE (Fine)
STD (Standard)
PHOTO
Records with high quality (low compression).
Records with standard quality (high compression).
MOVIE
41
42
Shooting menu
For details on the operation 1 page 34
REC Mode: Selecting the continuous shooting method
PHOTO MOVIE
Selects whether the camera performs continuous shooting or not when you press PHOTO.
(ExpBrktg) Records a series of three images with the exposure values automatically shifted (Exposure Bracket).
• You can select the image with the appropriate exposure after recording when you are unable to shoot good pictures depending on the brightness of the subject.
(Burst)
Normal
• When [Camera] is set to [Auto], the Exposure Bracket mode is not available.
• The flash is set to (Flash forced off).
Records maximum 3 images in succession when you press and hold down PHOTO.
• When “Recording” disappears, you can shoot the next image.
• The flash is set to (Flash forced off).
Does not shoot continuously.
On the Exposure Bracket
• The focus and white balance are adjusted for the first image, and these settings are also used for the other images.
• When the exposure is manually adjusted (page 39), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approximately 1.2 second.
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step value.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection
On the Burst
• When recording with the self timer, a series of a maximum of 3 images is recorded.
• The recording interval is approximately 1.2 second. The recording interval becomes longer, depending on the setting for the image size.
• When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst stops.
Shooting menu
For details on the operation 1 page 34
Flash Level: Adjusting the amount of flash light
Adjusts the amount of flash light.
+ (+)
(Normal)
– (–)
Toward +: Makes the flash level higher.
Toward –: Makes the flash level lower.
• The flash level can be set in 1/3 EV increments.
• The value is not displayed on the screen. It is indicated as + or –.
• To change flash mode, see page 26.
• If the subject is too bright or dark, this adjustment may have no effect.
• [Flash Level] cannot be set when flash mode is set to (Flash forced off).
Saturation: Adjusting the saturation
Adjusts the saturation of the image.
(+)
Normal
(–)
Toward +: Brightens the color.
Toward –: Darkens the color.
PHOTO MOVIE
PHOTO MOVIE
Sharpness: Adjusting the sharpness
Adjust the sharpness of the image.
(+)
Normal
(–)
Toward +: Sharpens the image.
Toward –: Softens the image.
Setup: Selecting the shooting settings
Select the settings for the shooting function. See page 54.
PHOTO MOVIE
43
Using functions for viewing
Viewing menu
The default settings are marked with .
When the mode has been set to REC, switch it to PLAY with MODE.
(Folder): Selecting the folder for viewing images
Selects the folder containing the image you want to playback when using the camera with
“Memory Stick Duo”.
1
Select the desired folder with b/B on the Multi-selector.
44
2 Select [OK] with v.
To cancel selecting the folder selection
Select [Cancel] in step 2.
z On the folder
The camera stores images in a specified folder of a “Memory Stick Duo”. You can change the folder or create a new one.
• To create a new folder
t [Create REC. Folder] (page 56)
• To change the folder for recording images
t [Change REC. Folder] (page 57)
• When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is displayed, the following indicators appear.
: Moves to the previous folder
: Moves to the next folder
: Moves to either the previous or next folders
(Protect): Preventing accidental erasure
Protects images against accidental erasure.
Exit
(Protect) See the following procedure.
Exits the Protection function.
To protect images in single-image mode
1
Display the image you want to protect.
2
Press MENU to display the menu.
3
Select (Protect) with b/B on the Multi-selector.
Viewing menu
For details on the operation 1 page 34
The image is protected and the indicator appears on the image.
4
To protect other images, select the desired image with b/B.
To protect images in index mode
1
Press (Index) to display the index screen.
2
Press MENU to display the menu.
3
Select (Protect) with b/B on the Multi-selector.
4
Select [Select] with b/B.
5
Select the image you want to protect with v/V/b/B.
A green indicator appears on the selected image.
(green)
6
Repeat step 5 to protect other images.
7
Press MENU.
8
Select [OK] with B.
The indicator turns white. The selected images are protected.
• To protect all images in the folder, select [All In This Folder] in step 4, and press the Multi-selector.
Select [On] with B.
To cancel the protection
In single-image mode
Press the Multi-selector in step 3 or 4 of “To protect images in single-image mode”.
In index mode
1
2
Press the Multi-selector to turn the indicator gray.
3
Repeat the operation above for all images to be unprotected.
4
Press MENU, select [OK] with B.
45
Viewing menu
For details on the operation 1 page 34
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of “To protect images in index mode”, and press the
Multi-selector. Select [Off] with B.
• Note that formatting the “Memory Stick Duo” erases all data stored on the recording media, even if images are protected, and these images cannot be recovered.
• It may take some time to protect an image.
DPOF: Adding a Print order mark
Adds (Print order) mark to images you want to print. By using the “Memory Stick Duo”, images with DPOF marks can be printed at photo shops or with printers which supports the
DPOF standard.
• You cannot mark movies.
Marking in single-image mode
1 Press MODE to set the playback mode.
2 Select the image you want to print.
3 Press MENU to display the menu.
4 Select [DPOF] with v/V on the Multi-selector.
(Print order) mark is attached to the image.
5
To mark other images, display the desired image with b/B, then press the Multi-selector.
Marking in index mode
1
Display the index screen.
2
Press MENU to display the menu.
3
Select [DPOF] with v/V.
4
Select [Select] with v/V.
5
Select the image you want to mark with v/V/b/B, then press the Multi-selector.
A green mark appears on the selected image.
46
6
Repeat step 5 to mark other images.
7
Press MENU.
Viewing menu
For details on the operation 1 page 34
8
Select [OK] with B, then press the Multi-selector.
The mark turns white.
To cancel, select [Cancel] in step 4 or select [Exit] in step 8, then press the Multi-selector.
To remove the mark
To remove the mark from an image, select the image to remove the mark and take the same steps as when marking a mark on an image.
indicator disappears.
To remove all the marks in the folder
Select [All In This Folder] in step 4, then press the Multi-selector. Select [Off], then press the
Multi-selector.
(Print): Printing images using a printer
Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer.
• You cannot print movies.
Stage 1: Preparing the camera
1
Press MENU.
2
Select [USB Connect] in [Setup 2] with v/V/b/B on the Multi-selector.
3
Select [PictBridge] with v/V.
The USB mode is set.
Stage 2: Connecting the camera to the printer
1 Connecting the camera to the printer.
1
To the USB jack
2 To the USB jack
USB cable
47
Viewing menu
For details on the operation 1 page 34
2
Turn on your camera and the printer.
After the connection is made, the indicator appears.
48
Stage 3: Printing
1
Select the desired printing method with v/V on the Multi-selector.
[All In This Folder]
Prints all the images in the folder.
[DPOF image]
Prints all the images with a
(Print order) mark (page 46) regardless of the displayed
image.
[Select]
Selects images and prints all the selected images.
Select the image you want to print with b/B, and then select [Print] with V.
[This image]
Prints a displayed image.
2
Select print settings with v/V/b/B.
[Index]
Select [On] to print as an index image.
[Size]
Select the size of the printing sheet.
[Date]
Select [Day&Time] or [Date] to insert the date and time on images.
[Quantity]
When [Index] is set to [Off]:
Select the number of sheets of an image that you want to print. The image will be printed as a single image.
When [Index] is set to [On]:
Select the number of sets of images that you want to print as an index image. If you selected [This image] in step 1, select the number of the same image you want to print side by side on a sheet as an index image.
3
Select [OK] with V/B, then press the Multi-selector.
The image is printed.
Viewing menu
For details on the operation 1 page 34
• Do not disconnect the USB cable while the appears on the screen.
(Do not disconnect the USB cable) indicator
indicator
Do not disconnect the USB cable while the
Connecting) indicator appears on the screen.
(PictBridge
Stage 4: Completing the printing
Make sure the screen has returned to Stage 2, and disconnect the USB cable from the camera.
To print images on the index screen
1
When the index screen is displayed, press MENU to display the menu items and select
(print).
2
Select how to print.
(Slide): Playing back a series of images
1
Select (Slide Show) with b/B on the Multi-selector.
2 Select [Start] with b /
B, then press the Multi-selector to start playback.
To pause the slide show
Press the Multi-selector.
To restart, select [Continue] with b
/ B
.
To display the previous/next image
Press b/B on the Multi-selector while the slide show is paused.
To end the slide show
Select [Exit] with v/V on the Multi-selector while the slide show is paused.
To change the setup
The default settings are marked with .
49
Viewing menu
For details on the operation 1 page 34
Interval
3 sec
5 sec
10 sec
30 sec
1 min
Repeat
On
Off
Sets the slide show interval.
Plays back images in a continuous loop.
After all the images have been played back, the slide show ends.
Image
When you use a “Memory Stick Duo” (not supplied)
Folder
Plays back all the images in the selected folder.
All
Plays back all the images in a “Memory Stick Duo” in order.
(Resize): Changing the image size of a recorded image
50
Large size Small size
You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing.
5M
3M
The setting size is just a guideline.
2M
VGA
Cancel
Cancels resizing.
1
Display the image you want to resize.
2
Press MENU to display the menu.
Viewing menu
For details on the operation 1 page 34
3
Set [Resize] with b/B on the Multi-selector.
4
Select the desired size with v/V.
The resized image is recorded in the recording folder as the newest file.
• You cannot resize movies.
• When you change from a small size to a large size, the image quality deteriorates.
• You cannot resize to an image size of 3:2.
• When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.
(Rotate): Rotating a still image
Rotates a still image.
1 Display the image to be rotated.
2 Press MENU to display the menu.
3 Select [Rotate] with v/V on the Multi-selector.
4 Select [
], then rotate the image with b/B.
5 Select [OK] with v/V.
• You cannot rotate protected images or movies.
• You may not be able to rotate images shot with other cameras.
• When viewing images on a computer, the image rotation information may not be reflected depending on the software.
(Divide): Cutting movies
Flow of the movie
,
Divide Divide
Cuts movies, or deletes unnecessary scenes of movies. This is a recommended function to use when the internal memory or “Memory Stick Duo” capacity is insufficient, or when you attach movies to your e-mail messages.
• Note that the original movie is deleted and that number is skipped. Also note that you cannot restore files once you cut them.
OK
Cancel
See the following procedure.
Cancels division.
51
Viewing menu
For details on the operation 1 page 34
52
Example: Cutting a movie numbered 101_0002
This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration.
101_0001 101_0003
1
2
1
Cutting scene A.
101_0002
1 A
2
B
3
3
101_0002
Divide
101_0002 is divided into 101_0004 and 101_0005.
2
Cutting scene B.
101_0004
1 3 A 2 B
101_0005
Divide
101_0005 is divided into 101_0006 and 101_0007.
3
Deleting scenes A and B if they are unnecessary.
101_0004 101_0007
1 3 A 2 B
Delete
101_0006
Delete
4
Only the desired scenes remain.
1 3 2
101_0006
Procedure
1
Display the movie to be divided.
2
Press MENU to display the menu.
3
Select [Divide] with b/B on the Multi-selector.
4
Select [OK] with v.
The playback of the movie starts.
Viewing menu
5
Press the Multi-selector.
For details on the operation 1 page 34
• When you want to adjust the cutting point, select c/C with b/B (frame rewind/forward).
• If you want to change the cutting point, press the Multi-selector. The playback of the movie starts again.
6
Select [OK] with v.
The movie is cut.
• The cut movies are assigned new numbers, and then recorded as the newest files in the selected recording folder.
• You cannot cut the following kinds of images.
– Still images
– Movies not long enough to cut (shorter than about two seconds)
(Setup): Changing Setup items
53
Customizing the settings
Using Setup items
You can change the default settings using the Setup screen.
Multi-selector
MENU button
1
Turn on the power and set the mode with MODE.
2
Press MENU to display the menu.
3
Press B on the Multi-selector to select
(Setup).
4
Press v/V/b/B to select the item you want to set.
The frame of the selected item turns yellow.
5
Press the Multi-selector to enter the setting.
54
To turn off the Setup screen, press MENU.
To return to the menu from the Setup screen, press b on the Multi-selector repeatedly.
To cancel the setting change
Select [Cancel] if it appears. If it does not appear, select the previous setting again.
• This setting is maintained even when the power is turned off.
Camera
For details on the operation 1 page 54
The default settings are marked with .
Function Guide
When you operate the camera, the description of functions is displayed.
On
Displays the function guide.
Off
Does not display the function guide.
Red Eye Reduction
The flash strobes two or more times before shooting to reduce the red-eye phenomenon when using the flash.
On ( )
Off
The flash always strobes to reduce the red-eye phenomenon.
Does not use Red Eye Reduction.
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.
Auto Review
Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image.
On
Off
Use the Auto Review.
Does not use Auto Review.
55
56
Memory Stick Tool
For details on the operation 1 page 54
This item appears only when a “Memory Stick Duo” is inserted in the camera.
Format
Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already formatted, and can be used immediately.
• Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images.
1
Select [Format] with v/V/b/B on the Multi-selector.
The message “All data in Memory Stick will be erased” appears.
2
Select [OK] with v.
The format is completed.
To cancel the formatting
Select [Cancel] in step 2.
Create REC. Folder
Creates a folder in a “Memory Stick Duo” for recording images.
1 Select [Create REC. Folder] with v/V/b/B on the Multi-selector.
The folder creation screen appears.
Create REC. Folder
Creating REC. folder
102
Ready?
OK
Cancel
2 Select [OK] with v.
A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder.
To cancel the folder creation
Select [Cancel] in step 2.
• When not creating a new folder, the “101MNV01” folder is selected as the movie folder, and
“101MSDCF” folder is selected as the still image folder.
• You can create folders designated up to “999MSDCF”.
• Images are recorded in the newly created folder until a different folder is created or selected.
• You cannot delete a folder with the camera. To delete a folder, use your computer, etc.
• Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created.
Memory Stick Tool
For details on the operation 1 page 54
Change REC. Folder
Changes the folder currently used for recording images.
1
Select [Change REC. Folder] with v/V/b/B on the Multi-selector.
The folder selection screen appears.
2
Select the desired folder with b/B, and [OK] with v.
To cancel changing the recording folder
Select [Cancel] in step 2.
• You cannot select the “100MSDCF” folder as a recording folder.
• You cannot move recorded images to a different folder.
Copy
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo”.
2
Select [Copy] with v/V/b/B on the Multi-selector.
The message “All data in internal memory will be copied” appears.
3 Select [OK] with v.
Copying starts.
To cancel the copying
Select [Cancel] in step 3.
• Charge the battery sufficiently. Copying image files when the remaining battery amount is low can cause data transfer failure or damage the data due to battery exhaustion.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
[Internal Memory Tool] (page 58).
• When you copy the data in the internal memory to the “Memory Stick Duo”, a new folder is created. You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be copied.
• Even if you copy data, a (Sharemark) or a (Print order) mark is not copied.
57
58
Internal Memory Tool
For details on the operation 1 page 54
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Format
Formats data stored in the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [Format] with v/V/b/B on the Multi-selector.
The message “All data in internal memory will be erased” appears.
2
Select [OK] with v.
The format is completed.
To cancel the formatting
Select [Cancel] in step 2.
1
Setup 1
For details on the operation 1 page 54
The default settings are marked with .
LCD Backlight
Selects the brightness of the LCD backlight when using the camera with battery.
Bright
Brightens.
Normal
• You can change the setting by pressing (Screen display switch) button longer.
• Selecting [Bright] uses up the battery charge faster.
Beep
Selects the sound produced when you operate the camera.
Shutter
On
Off
Turns on the shutter sound when you press PHOTO.
Turns on the beep/shutter sound when you press the Multiselector, PHOTO or MOVIE button.
Turns off the beep/shutter sound.
Language
Selects the language to be used to display the menu items, warnings, and messages.
Initialize
Initializes the setting to the default setting. Even if you execute this function, the images stored in the internal memory are retained.
1
Select [Initialize] with v/V/b/B on the Multi-selector.
The message “Initialize all settings” appears.
2
Select [OK] with v.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 2.
• Make sure that the power is not disconnected during resetting.
59
60
2
Setup 2
For details on the operation 1 page 54
The default settings are marked with .
File Number
Selects the method used to assign file numbers to images.
Series
Assigns numbers to files in sequence even if the recording folder or the “Memory Stick Duo” is changed. (When the replaced “Memory Stick Duo” contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned.)
Reset Starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.)
USB Connect
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the USB cable.
PictBridge
Web camera
Mass Storage
Connects the camera to a PictBridge compliant printer
(page 47). When you connect the camera to a computer, the
copy wizard starts automatically, and the images in the recording folder on the camera are copied to the computer
(with Windows XP/Vista, Mac OS X).
Connect the camera and a computer with a USB cable and use the camera as a webcam (USB streaming).
• Movies output will be 320×240 (30fps) Motion JPEG format.
• Movies streamed will not be displayed on the LCD screen of the camera.
Establishes a Mass Storage connection between the camera and a computer or other USB device.
Connecting the camera and your computer with Mass Storage
“Mass Storage” mode lets a computer recognize the camera with “Memory Stick Duo” inserted as an external memory device and enables you to operate the camera through the computer connected with a USB cable.
Setup 2
For details on the operation 1 page 54
Connecting the camera and your computer
Connect the camera as illustrated below.
1
To a USB jack
2
To the (USB) jack
USB cable
NSC-GC3: You cannot input signals to your camera through the (USB) jack.
To delete the USB connection
Perform the procedures listed below beforehand when:
• Disconnecting the USB cable
• Removing a “Memory Stick Duo”
• Inserting a “Memory Stick Duo” into the camera after copying images from the internal memory
• Turning off the camera
1
Double-click on the tasktray.
Double-click here
2
Click (USB Mass Storage Device) t [Stop].
3
Confirm the device on the confirmation window, then click [OK].
4
Click [OK].
The device is disconnected.
• Step 4 is unnecessary for Windows XP.
61
Setup 2
For details on the operation 1 page 54
Image file storage destinations and file names
Example: viewing folders on Windows XP
A Folder containing image data recorded using this camera
When not creating any folders, there is only the “101MSDCF” folder
B
Folder containing movie data that were recorded using your camera
When not creating any folder, there is only the “101MNV01” folder
• You cannot record/play back any images to the “MISC” folder.
• Image files are named as follows. ssss stands for any number within the range from 0001 to 9999.
– Still image files: DSC0ssss.JPG
– Movie files: M4V0ssss.MP4
• For more information about folders, see page 56.
Video Out
62
Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 65 for the TV color system of the country or region
where the camera is used.
NTSC
PAL
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
Sets the video output signal to PAL mode (e.g., for Europe).
Setup 2
For details on the operation 1 page 54
Clock Set
Sets the date and time.
1
Select [Clock Set] with v/V/b/B on the Multi-selector.
/ / :
2
Select the date display format with v/V.
3
Select each item with b/B and set the numeric value with v/V.
4
Select [OK] with B.
To cancel the clock setting
Select [Cancel] in step 4.
63
Viewing images on a TV
Viewing images on a TV
You can view images on a TV screen by connecting the camera to a TV.
The connection varies according to the type of TV the camera is connected to.
Turn off both your camera and the TV before connecting the camera and the TV.
1
Connect the camera to the TV with the A/V connecting cable.
MODE button
VIDEO AUDIO 1
To audio/video input jacks
Yellow White
64
A/V connecting cable
(supplied)
2
To the A/V OUT jack
• If your TV has stereo input jacks, connect the audio plug (white) of the A/V connecting cable to the left audio jack.
2
Turn on the TV and set the TV/video input switch to “video”.
• For details, see the operating instructions supplied with the TV.
3
Press MODE to set the playback mode.
Images shot with the camera appear on the TV screen.
Press b/B on the Multi-selector to select the desired image.
• When using your camera abroad, it may be necessary to switch the video signal output to match that
• Image will not be displayed on the LCD panel when an image signal is output to TV.
Viewing images on a TV
On TV color systems
If you want to view images on a TV screen, you need a TV with a video input jack and the
A/V connecting cable. The color system of the TV must match that of your camera. Check the following lists for the TV color system of the country or region where the camera is used.
NTSC system
Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica,
Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc.
PAL system
Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland,
Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal,
Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.
65
Troubleshooting
Troubleshooting
If you experience trouble with your camera, try the following solutions.
1
Check the items on pages 67 to 73.
2
Turn the power off, and turn it on again after about one minute.
3
Press the RESET button (page 9) using a fine-tipped object, and turn on the
power.
If you do the operation above, the date and time setting is cleared.
4
Consult your Sony dealer or local authorized Sony service facility.
When repairing the camera, we may check a minimum amount of data stored on the internal memory in order to improve the condition. However, Sony dealer will neither copy nor save your data.
66
Click one of the following items to jump to the page explaining the symptom and cause or the appropriate corrective action.
Battery and power 67
Internal memory 71
Shooting movies/still images 67
Printing
Viewing images
Deleting/Editing images 70
Others
71
69
PictBridge compliant printer 71
73
“Memory Stick Duo” 70
Troubleshooting
Battery and power
Cannot turn on the camera.
•
Remove the insulation sheet.
•
The battery is discharged. Charge the battery (page 15).
• The plug of the AC Adaptor has been disconnected from the wall outlet (wall socket).
Connect it to the wall outlet (wall socket) (page 15).
The power turns off suddenly.
• If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery. Turn on the camera again.
The battery remaining indicator is incorrect.
• This phenomenon occurs when you use the camera in an extremely hot or cold location.
•
The displayed battery remaining differs from the current one. Fully discharge and then charge the battery to correct the display.
•
The battery is discharged. Charge the battery.
Shooting movies/still images
Your camera cannot record images.
• Check the free capacity of the internal memory or “Memory Stick Duo”. If it is full, do one of the following:
–
Delete unnecessary images (page 30).
– Change the “Memory Stick Duo”.
•
The shooting mode will automatically stop in either of the following situations.
– When the file size of the movie being recorded exceeds 2 GB.
– After the maximum shooting duration time* for each file has passed.
* NSC-GC1: 2 hours, NSC-GC3: 29 minutes
•
You are using the “Memory Stick Duo” with a write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 77).
•
You cannot record images while charging the flash.
•
Press MODE and set the camera to recording mode to shoot a movie or a still image.
The LCD screen does not display the movies or still images you are shooting.
• Your camera is set to the playback mode. Press MODE to change to the recording mode
Anti-blur function does not work.
• The anti-blur function does not work when shooting still images.
•
The anti-blur function may not work properly when shooting night scenes.
67
Troubleshooting
Recording takes a long time.
•
The NR slow shutter function is activated. This is not a malfunction.
The image is out of focus.
•
The subject is too close. Shoot in (Close-up) recording mode. Make sure to position the lens farther away from the subject than the shortest shooting distance, approximately 60 cm
(1 feet 11 5/8 inches), when shooting (page 26).
The flash does not work.
•
The flash is set to
• You cannot use the flash when:
–
[REC Mode] is set to [Burst] or [ExpBrktg] (page 42).
– (Twilight mode) or
(Fireworks mode) is selected in the Scene Selection mode
– When shooting movies, or when shooting a still image while shooting movies
•
Set the flash to (Flash forced on) when (Landscape mode), (Beach mode), or
(Snow mode) is selected in the Scene Selection mode (page 38).
Fuzzy white circular spots appear in images shot using the flash.
•
Particles (dust, pollen, etc) in the air reflected the flash light and appeared in the image. This is not a malfunction.
The date and time are not displayed on LCD screen.
•
While shooting, the date and time are not displayed. They are displayed only during playback.
The recording date is not superimposed on an image.
•
This camera does not have a feature for superimposing dates on images.
The screen is too dark or too bright.
•
Adjust the brightness of the LCD backlight (page 59).
The image is too dark.
•
You are shooting a subject with a light source behind the subject. Adjust the exposure
The image is too bright.
•
Adjust the exposure (page 39).
68
The image colors are not correct.
•
Set [Color Mode] to [Off] (page 38).
Troubleshooting
Vertical streaks appear when you are shooting a very bright subject.
•
The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on the image. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
•
The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
•
Set [Red Eye Reduction] to [On] (page 55).
• Shoot the subject at a distance closer than the flash range using the flash.
• Light the room and shoot the subject.
Dots appear and remain on the screen.
•
This is not a malfunction. These dots are not recorded (page 3).
Cannot shoot images in succession.
•
The internal memory or “Memory Stick Duo” is full. Delete unnecessary images (page 30).
• The battery level is low.
Viewing images
Your camera cannot playback images.
•
Press MODE to change to the playback mode (page 28).
• The folder/file name has been changed on your computer.
• When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection.
The date and time are not displayed.
•
(Screen display switch) button is turned off (page 25).
The image appears rough right after playback starts.
•
The image may appear rough right after playback starts due to image processing. This is not a malfunction.
The image does not appear on the TV screen.
•
Check [Video Out] to see if the video output signal of your camera is set to the color system of
•
Check whether the connection is correct (page 64).
•
If the USB cable is connected to the USB terminal, disconnect it.
69
70
Troubleshooting
Deleting/Editing images
Your camera cannot delete an image.
•
Cancel the protection (page 44).
•
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 77).
You have deleted an image by mistake.
• Once you have deleted an image, you cannot restore it. We recommend that you protect
images (page 44), or use the “Memory Stick Duo” with the write-protect switch and set the
switch to the LOCK position (page 77) to prevent accidental erasure.
“Memory Stick Duo”
Cannot insert a “Memory Stick Duo”.
• Insert it in the correct direction.
Cannot format a “Memory Stick Duo”.
•
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 77).
You have formatted a “Memory Stick Duo” by mistake.
• All the data on the “Memory Stick Duo” is deleted by formatting. You cannot restore it. We recommend that you set the write-protect switch on the “Memory Stick Duo” to the LOCK
position to prevent accidental erasure (page 77).
The internal memory cannot be recognized as a removable disk when connected by USB.
•
Depending on the connected USB equipment, the internal memory of the camera cannot be recognized as a removable disk. In [Copy] of [Memory Stick Tool], connect the camera after
copying the images of the internal memory to the “Memory Stick Duo” (page 57).
Troubleshooting
Internal memory
Cannot playback or record images using the internal memory.
•
There is a “Memory Stick Duo” inserted in the camera. Remove it.
Cannot copy the data stored in the internal memory to a “Memory Stick Duo”.
• The “Memory Stick Duo” is full. Check the capacity.
Cannot copy the data on the “Memory Stick Duo” or the computer to the internal memory.
•
Data on a “Memory Stick Duo” or a computer cannot be copied to the internal memory.
Printing
Also see “PictBridge compliant printer” (as follows) in conjunction with the following items.
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the image may be cut off.
•
When printing images using your own printer, cancel the trimming or borderless settings.
Consult the printer manufacturer as to whether the printer provides these functions or not.
•
When having images printed at a digital print shop, ask the shop whether they can print the images without cutting off both edges.
Cannot print images with the date.
•
This camera does not have a feature for superimposing dates on images. However, because the images shot with the camera include information on the recording date, you can print images with the date superimposed if the printer or the software can recognize Exif information. For compatibility with Exif information, consult the manufacturer of the printer or the software.
• When you print images at a shop, images can be printed with the date if you ask them to do so.
PictBridge compliant printer
A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
•
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] (page 60).
• Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.
71
72
Troubleshooting
Cannot print images.
•
Check that the camera and the printer are properly connected using the USB cable.
• Turn on the printer. For further information, refer to the operating instructions supplied with the printer.
• If you select [Exit] during printing, images may not be printed. Disconnect and connect the
USB cable again. If you still cannot print your images, disconnect the USB cable, turn the printer off and then on, then connect the USB cable again.
•
Movies cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may not be printed.
Printing is canceled.
•
Confirm that you have disconnected the USB cable before the mark disappears.
(PictBridge Connecting)
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether the printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
•
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 47).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the USB cable and reconnect it whenever you change the paper size after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 47) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer.
Troubleshooting
Others
The lens gets fogged.
•
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it.
The camera becomes warm when you use it for a long time.
•
This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
•
Set the date and time again (page 63).
You want to change the date or time.
•
Set the date and time again (page 63).
73
Warning indicators and messages
74
Messages
If the following messages appear, follow the instructions.
E
•
The battery level is low. Charge the battery immediately. The indicator may flash even if there are still 5 to 10 minutes of remaining battery time left.
No Memory Stick
•
Insert a “Memory Stick Duo” (page 17).
System error
•
Turn the power off and then on again.
Internal memory error
• Turn the power off and then on again.
Reinsert the Memory Stick
• Insert the “Memory Stick Duo”
• The inserted “Memory Stick Duo” cannot be used in your camera
• The “Memory Stick Duo” is damaged.
• The terminal section of the “Memory
Stick Duo” is dirty.
Memory Stick type error
• The inserted “Memory Stick Duo” cannot be used in your camera
Format error
•
Format the media again (page 56).
Memory Stick locked
•
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position
No memory space
•
Delete unnecessary images or files
Read only memory
•
Your camera cannot record or delete images on this “Memory Stick Duo”.
No file in this folder
• No images have been recorded in this folder.
• You did not operate correctly when copying images from your computer.
Folder error
•
A folder with the same first three digit number already exists on the “Memory
Stick Duo” (for example: 123MSDCF and 123ABCDE). Select other folders,
or create a new folder (pages 56, 57).
Cannot create more folders
• The folder with a name beginning with
“999” exists on the “Memory Stick
Duo”. You cannot create any folders if this is the case.
Cannot record
•
The camera cannot record images in the selected folder. Select a different folder
File error
•
An error occurred while the image was playing back.
Warning indicators and messages
File protect
•
Release the protection (page 44).
Image size over
•
You are playing back an image with size that cannot be played back on your camera.
Invalid operation
•
You are trying to playback a file that is not compatible with the camera.
•
You have selected a function that is not available for movies.
Turn the power off and on again
•
A problem with the lens caused an error.
Enable printer to connect
• [USB Connect] is set to [PictBridge], however the camera is connected to a non-PictBridge compliant device.
Check the device.
•
The connection is not established.
Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.
Connect to PictBridge device
•
You tried to print images before the printer connection was established.
Connect to a PictBridge compliant printer.
No printable image
• You tried to execute [DPOF image] without placing a DPOF (Print order) mark on the image(s).
• You tried to execute [All In This Folder] while a folder that holds only movies was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check the printer.
•
Check if the image you want to print is corrupted.
•
The data transmission to the printer may not be completed yet. Do not disconnect the USB cable.
Processing
• The printer is canceling the current print job. You cannot print until it is finished.
This may take time, depending on the printer.
Unsupported data
• The data is unsupported by the camera and cannot be played back.
75
76
Others
To use your camera abroad — Power sources
You can use your camera and the UPA-AC05 AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz.
•
Do not use an electronic transformer (travel converter), as this may cause a malfunction.
On the “Memory Stick”
A “Memory Stick” is a compact, portable
IC recording medium with a large data capacity.
You can use the following types of
“Memory Stick” listed below on this camera. However, we do not guarantee the operation of all types of “Memory Stick” on your camera. (See the list below for more details.)
Types of “Memory Stick” Recording/
Playback
“Memory Stick Duo”
(without MagicGate)
“Memory Stick Duo”
(with MagicGate)
“MagicGate Memory Stick Duo”
“Memory Stick PRO Duo”
“Memory Stick PRO-HG Duo” a a
*1 a a
*1 a
*1*2
*1
The types of “Memory Stick Duo” that support high speed data transfer. The speed of data transfer varies depending on the device to be used.
*2
Your camera does not support an 8-bit parallel data transfer. A 4-bit parallel data transfer, as same as “Memory Stick PRO Duo”, is supported.
• Your camera cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a copyright protection technology that records and transfers the contents in an encrypted format.
• Your camera is compatible with “Memory Stick
Micro” (“M2”). “M2” is the abbreviation for the
“Memory Stick Micro”.
• Still image format: Your camera compresses and records image data in the JPEG (Joint
Photographic Experts Group) format. The file extension is “.JPG”.
• A “Memory Stick Duo” formatted by a computer (Windows OS/Mac OS) does not have guaranteed compatibility with your camera.
• Data read/write speed may vary depending on the combination of the “Memory Stick Duo” and “Memory Stick Duo” compliant product you use.
• You can prevent accidental erasure of images when you slide the write-protect tab on the
“Memory Stick Duo” with a small tapered object, to the write-protect position.
• Damaged or lost image data will not be compensated for, and may occur in the following cases:
– If you eject the “Memory Stick Duo” or turn the power off on your camera while your camera is reading or writing image files on the
“Memory Stick Duo” (while the access lamp is lit or flashing).
– If you use the “Memory Stick Duo” near magnets or magnetic fields.
• It is recommended you make a back-up of important data on the hard disk of a computer.
• Be careful not to apply excessive force when writing on a memo area on a “Memory Stick
Duo”.
• Do not attach a label or the like on a “Memory
Stick Duo” or a Memory Stick Duo adaptor.
• When you carry or store a “Memory Stick Duo”, put it in its case.
• Do not touch, or allow metallic objects to come into contact with the terminals.
• Do not bend, drop or apply strong force to the
“Memory Stick Duo”.
• Do not disassemble or modify the “Memory
Stick Duo”.
• Do not let the “Memory Stick Duo” get wet.
• Be careful to keep “Memory Stick Duo” media out of the reach of small children. There is danger that a child might swallow it.
• Do not insert anything other than a “Memory
Stick Duo” into the Memory Stick Duo slot.
Doing so may cause a malfunction.
• Do not use or keep the “Memory Stick Duo” in the following locations:
– Places subject to extremely high temperature, such as a car parked outside in the summer.
– Places under direct sunlight.
– Places with extremely high humidity or subject to corrosive gases.
77
78
On the “Memory Stick”
On the Memory Stick Duo adaptor
• When using a “Memory Stick Duo” with a
“Memory Stick” compliant device, be sure to insert the “Memory Stick Duo” into a Memory
Stick Duo adaptor.
• When inserting a “Memory Stick Duo” into a
Memory Stick Duo adaptor, make sure the
“Memory Stick Duo” is inserted facing in the correct direction, then insert it all the way in.
Note that improper use may cause a malfunction. Also, if you force the “Memory
Stick Duo” into the Memory Stick Duo adaptor in the wrong direction, it may be damaged.
• Do not insert a Memory Stick Duo adaptor without a “Memory Stick Duo” attached. Doing so may result in malfunctions of the unit.
On a “Memory Stick PRO Duo”
• The maximum memory capacity of a “Memory
Stick PRO Duo” that can be used on your camera is 8 GB.
Notes on using “Memory Stick Micro”
• To use a “Memory Stick Micro” with this camera, you need a Duo-sized M2 Adaptor.
Insert the “Memory Stick Micro” into the Duosized M2 Adaptor, and then insert the adaptor into the Memory Stick Duo slot. If you insert a
“Memory Stick Micro” into this camera without using a Duo-sized M2 Adaptor, you might not be able to remove it from the camera.
• Do not leave the “Memory Stick Micro” within the reach of small children. They might accidentally swallow it.
On image data compatibility
• Image data files recorded on a “Memory Stick
Duo” by your camera conform to the “Design rule for Camera File system” universal standard established by the JEITA (Japan Electronics and
Information Technology Industries
Association).
• On your camera, you cannot play back still images recorded on other devices that do not conform to the universal standard. (These models are not sold in some regions.)
• If you cannot use a “Memory Stick Duo” that has been used with another device, format it
with your camera (page 56). Note that
formatting erases all information on the
“Memory Stick Duo”.
• You may not be able to play back images with your camera:
– When playing back image data modified on your computer.
– When playing back image data recorded with other devices.
On the built-in battery
On charging the battery
We recommend charging the battery in an ambient temperature of between 10°C to 30°C (50°F to
86°F). You may not be able to efficiently charge the battery outside of this temperature range.
Effective use of the battery
• Battery performance decreases in low temperature surroundings. So, the time that the battery can be used is shorter in cold places. We recommend the following to ensure longer battery use:
– Put the camera in a pocket, etc. to warm it up before using.
• The battery will run out quickly if you use the flash or zoom frequently.
How to store the camera
• If the camera is not to be used for a long time, to maintain its function, fully charge the internal battery and use it up at least once a year, and then store the camera in a dry, cool place.
• To use the battery up, leave your camera in slide
show (page 49) playback mode until the power
goes off.
On battery life
• The battery life is limited. Battery capacity decreases little by little as you use it more and more, and as time passes. If the battery operating time seems shortened considerably, a probable cause is that the battery has reached the end of its life. Contact your Sony dealer or local authorised Sony service facility.
• The battery life varies according to how it is stored and the operating conditions and environment.
79
Index
Index
A
A/V connecting cable ........... 64
A/V OUT jack ......................64
Auto Review ......................... 55
B
B & W .................................. 38
Beach mode ..........................37
Beep......................................59
Built-in battery ..................... 79
Burst ..................................... 42
C
Camera mode........................37
Candle mode......................... 37
Change REC. Folder.............57
Clock Settings....................... 63
Close-up mode......................26
Cloudy .................................. 40
Color Mode........................... 38
Connecting
TV .................................64
Copy ..................................... 57
Create REC. Folder .............. 56
D
Date ......................................63
Daylight ................................ 40
Delete
Format .....................56, 58
Deleting images .................... 30
Divide ................................... 51
DPOF.................................... 46
E
EV......................................... 39
Exposure Bracket.................. 42
80
F
File Number..........................60
Fine ...................................... 41
Fireworks mode ................... 37
Flash (Shooting)................... 26
Flash (White Bal)................. 40
Flash forced off .................... 26
Flash forced on..................... 26
Flash Level........................... 43
Flash mode ........................... 26
Fluorescent........................... 40
Folder ................................... 44
Changing....................... 57
Creating ........................ 56
Selecting ....................... 44
Format ............................ 56, 58
Function Guide .................... 55
H
High-speed shutter mode ..... 37
Histogram....................... 25, 39
Holding the camera.............. 24
How to handle the camera...... 4
I
Identifying parts ..................... 8
Image size ............................ 20
Incandescent......................... 40
Index screen ......................... 29
Indicator ............................... 10
Initialize ............................... 59
Internal Memory Tool .......... 58
ISO ....................................... 41
L
Landscape mode .................. 37
Language.............................. 59
LCD Backlight ..................... 59
M
Mass Storage........................ 60
“Memory Stick Duo” ........... 77
Memory Stick Tool............... 56
Menu
Items.............................. 35
Shooting ........................ 36
Viewing ......................... 44
N
NTSC.................................... 62
P
PAL....................................... 62
PictBridge............................. 60
Playback zoom ..................... 28
Print ...................................... 47
Print order mark ................... 46
Protect................................... 44
R
REC Mode............................ 42
Red Eye Reduction............... 55
Resize ................................... 50
Rotate ................................... 51
S
Saturation ............................. 43
Screen
Indicator ........................ 10
Self-timer.............................. 27
Sepia ..................................... 38
Setup 1.................................. 59
Setup 2.................................. 60
Sharemark............................. 32
Sharpness.............................. 43
Shooting ............................... 36
Movies........................... 24
Still image ..................... 24
Slide...................................... 49
Slow synchro ........................ 26
Snow mode ........................... 37
Index
Soft snap mode .....................37
Standard ................................41
T
Troubleshooting ....................66
TV .........................................64
Twilight mode .......................37
Twilight portrait mode ..........37
U
USB Connect ........................60
USB streaming......................60
Using your camera abroad ....76
V
VGA......................................21
Video Out..............................62
Viewing .................................44
Viewing images.....................28
Vivid......................................39
Volume ..................................28
W
Warning indicators and messages........................74
Web camera ..........................60
White Bal ..............................40
Z
Zoom.....................................26
81
82
Notes on the License
THIS PRODUCT IS LICENSED UNDER THE
MPEG-4 VISUAL PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NON-
COMMERCIAL USE OF A CONSUMER FOR
(i) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD
(“MPEG-4 VIDEO”)
AND/OR
(ii) DECODING MPEG-4 VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING
THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM
MPEG LA, LLC.
SEE HTTP://WWW.MPEGLA.COM
Additional information on this product and answers to frequently asked questions can be found at our
Customer Support Website.
Advertisement
Key features
- 10.1-megapixel CCD sensor for high-quality images
- 3x optical zoom lens for getting closer to your subjects
- 2.7-inch LCD screen for easy viewing and composition
- Optical SteadyShot image stabilization to reduce blur caused by camera shake
- Face Detection technology for perfect portraits
- Smile Shutter technology to automatically capture smiles
- STAMINA battery for long-lasting shooting