advertisement
Bedienungsanleitung / Manual
ARC X-One
Inhaltsverzeichnis / Table of contents
Deutsch
1.
Sicherheitshinweise.......................................................................................................................... 3
1.1.
Hinweise für den sicheren und einwandfreien Gebrauch ........................................................ 3
2.
Einführung ........................................................................................................................................ 4
2.1.
Packungsinhalt: ....................................................................................................................... 4
3.
Einrichten ......................................................................................................................................... 4
3.1.
Installation ................................................................................................................................ 4
3.2.
Einstellungen ........................................................................................................................... 5
3.3.
Verkabelung............................................................................................................................. 5
3.3.1.
DMX Kabel ....................................................................................................................... 6
4.
Bedienung des Menüs...................................................................................................................... 6
4.1.
Passwort zurück setzen ........................................................................................................... 8
5.
DMX Tabelle ..................................................................................................................................... 8
5.1.
DMX Tabelle 12 Kanäle ........................................................................................................... 8
5.2.
DMX Tabelle 18 Kanäle ......................................................................................................... 10
Englisch
6.
Safety instructions .......................................................................................................................... 13
6.1.
FOR SAFE AND EFFICIENT OPERATION .......................................................................... 13
7.
Start Up .......................................................................................................................................... 14
7.1.
Content of the package: ........................................................................................................ 14
8.
Set Up ............................................................................................................................................ 14
8.1.
Installation .............................................................................................................................. 14
8.2.
Button explanation ................................................................................................................. 15
8.3.
Wiring ..................................................................................................................................... 15
8.3.1.
DMX Cable .................................................................................................................... 16
9.
Using the menu .............................................................................................................................. 16
9.1.
Erase a password: ................................................................................................................. 18
10.
DMX Table ................................................................................................................................. 18
10.1.
DMX Table with 12 Channels ................................................................................................ 18
10.2.
DMX Table with 18 Channels ................................................................................................ 20
11.
Technische Daten / Technical data ........................................................................................... 23
2 / 24
1. Sicherheitshinweise
•
Dieses Gerät ist nur für die Verwendung in geschlossenen Räumen (nicht im
Freien) erlaubt.
•
Es erlischt der Garantieanspruch, bei manuellen Veränderungen des Gerätes.
•
Nur von ausgebildeten Fachkräften reparieren lassen.
•
Benutzen Sie nur Sicherungen desselben Typs und nur Originalteile als
Ersatzteile.
•
Um Feuer und Stromschläge zu verhindern, schützen Sie das Gerät vor
Regen und Feuchtigkeit.
•
Ziehen Sie den Netzstecker, bevor Sie das Gehäuse öffnen.
1.1. Hinweise für den sicheren und einwandfreien Gebrauch
Vorsicht bei Hitze und extremen Temperaturen!
Stellen Sie das Gerät an einem Ort auf, wo es keinen extremen Temperaturen, Feuchtigkeit oder
Staub ausgesetzt ist. Betreiben Sie das Gerät nur in einer Umgebungstemperatur zwischen 0°C
(32°F) - 40°C (104°F). Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder Wärmequellen aus.
Schützen Sie das Gerät vor Feuchtigkeit, Wasser und Staub!
Das Gerät sollte nur an Orten aufgestellt werden, an denen keine hohe Luftfeuchtigkeit herrscht. Stellen Sie keine Flüssigkeiten auf oder in die Nähe des Systems.
Stellen Sie das Gerät immer auf festen Untergrund!
Stellen Sie das Gerät auf einen festen Untergrund, um Vibrationen zu vermeiden.
Benutzen Sie keine chemischen Mittel zur Reinigung!
Metallteile können mit einem feuchten Tuch gereinigt werden. Bevor Sie das Gerät säubern, ziehen
Sie immer den Netzstecker!
Wenn das Gerät nicht richtig funktioniert!
Der Benutzer sollte nicht versuchen, das Gerät eigenständig zu warten. Alle Reparaturen und
Servicearbeiten sollten von einem qualifizierten Techniker durchgeführt werden.
Gehen Sie sorgsam mit dem Netzkabel um!
Ziehen Sie niemals am Netzkabel, um das Gerät vom Strom zu trennen! Wenn Sie das Gerät über einen längeren Zeitraum nicht benutzen, ziehen Sie den Stecker des Netzkabels aus der Dose.
3 / 24
ACHTUNG!
Der Garantieanspruch erlischt, bei Schäden die durch Nichtbeachtung der Anleitung verursacht werden. Der Hersteller und Importeur übernimmt für Folgeschäden die daraus resultieren keinerlei
Haftung. Nur ausgebildete und unterwiesene Fachkräfte dürfen den korrekten elektrischen Anschluss durchführen. Alle elektrischen und mechanischen Anschlüsse müssen entsprechend der europäischen Sicherheitsnormen montiert sein.
2. Einführung
Vielen Dank, dass sie sich für den ARC X-One entschieden haben. Entpacken sie das Gerät vorsichtig und kontrollieren sie, dass alle Komponenten vorhanden sind. Bitte vergewissern sie sich dass ihr Paket in gutem Zustand ist und keine Beschädigungen vorweist. Falls doch informieren sie das Transportunternehmen umgehend und bewahren sie die Verpackung auf. Die Verpackung sollte im Übrigen immer aufbewahrt werden, da bei Reparaturen das Gerät in der Originalverpackung zurück geschickt werden sollte, um Beschädigungen während des Transportes zu vermeiden.
2.1. Packungsinhalt:
1 x ARC X-One
1 x Bedienungsanleitung
1 x Stromanschlusskabel IEC
1 x DMX Signal Kabel XLR
3. Einrichten
3.1. Installation
Das Gerät muss an zwei unabhängigen Flugsystemen an einer Truss aufgehängt werden. Nutzen sie dafür Truss Clamps. Zusätzlich muss ein Safety benutzt werden um das Gerät vor ungewolltem
Herunterfallen zu schützen. Jede Hängevorrichtung muss mindestens das 10-fache Gewicht des
Gerätes halten können! Alternativ können sie das Gerät auf seine Gummifüße stellen. Hierbei achten sie bitte auf eine ausreichende Sicherung gegen das weg kicken mit dem Fuß bzw um keine
Stolperfallen zu erstellen.
4 / 24
3.2. Einstellungen
DMX IN
DMX OUT
POWER IN
Funktionen der Bedienelemente:
MENU
UP
Down
ENTER
3.3. Verkabelung
Wechselt das Funktionsmenü
Wechselt eine Funktionsseite nach oben
Bei Zahlenwerten: erhöht diese
Wechselt eine Funktionsseite nach unten
Bei Zahlenwerten: verringert diese
Bestätigt eine getätigte Änderung im Menü
Hier können sie ein DMX Kabel einstecken. IM
Master Slave Modus kommt das Kabel von ihrem
Mastergerät, im DMX Control Modus kommt das
Kabel von ihrer Konsole.
Verbinden sie von hier per DMX Kabel zum nächsten Gerät. Achten sie auf die DMX Norm!
Hier wird das mitgelieferte Stromkabel eingesteckt. Verbinden sie das Gerät erst mit dem Kabel und dann mit dem
Hauptstromanschluss!
5 / 24
3.3.1. DMX Kabel
Die DMX Kabel müssen einen XLR Stecker männlich und einen XLR Stecker weiblich an den Enden besitzen.
Achten sie darauf, dass am Ende ihrer DMX Kette ein sogenannter Terminator gesetzt wird. Das DMX
Signal könnte sich am Ende ihrer Kette aufschwingen und Störungen verursachen. Durch einen
Terminator wird das verhindert. Um einen Terminator herzustellen löten sie einfach einen 120 Ohm ¼
Watt Resistor zwischen die Pins 2 und 3.
Alternativ können sie sich einen solchen Terminator im gängigen Fachhandel kaufen.
Die DMX Norm schreibt vor niemals mehr als 32 Geräte zu verbinden, bzw nicht mehr als 100m Kabel zu nutzen. Sollten sie mehr benötigen empfehlen wir die Nutzung eines DMX Boosters oder Verteiles.
4. Bedienung des Menüs
Erfahren sie hier welche Menüfunktionen es gibt, und welche Werte sie beeinflussen können:
Menü 1:
DMX 512 Drücken Sie Enter. Das Display zeigt DMX 512 18CH oder DMX512 12CH zeigt
Hier stellen sie folglich ein, mit wie vielen Kanälen sie das Gerät steuern mögen.
Mit den UP/DOWN Tasten können sie zwischen den zwei Werten hin und her schalten. Drücken sie erneut ENTER um die DMX Adresse von 1 – 512 einzustellen.
Drücken sie ENTER um die Einstellung zu speichern!
Mit den UP/DOWN Tasten können sie nun zum nächsten Menü schalten:
Menü 2:
TILT Drücken sie ENTER. Das Display zeigt Tilt No, oder Tilt Yes. Hier stellen sie ein, ob sie Tilt invertieren wollen mit Yes oder ob sie es nicht wollen mit No. Mit den
UP/DOWN Tasten können sie zwischen den zwei Werten hin und her schalten. Drücken sie ENTER um die Einstellung zu speichern!
Mit den UP/DOWN Tasten können sie nun zum nächsten Menü schalten:
Menü 3:
Manual Drücken sie ENTER. Das Display zeigt Ch01 – CH18,mit einer darauf folgenden 3 stelligen Zahl. Hier können sie alle Kanäle, die sie per DMX steuern würden auch manuell einstellen. Wählen sie mit den UP/DWON Tasten den richtigen Kanal aus, dann bestätigen sie mit ENTER. Wählen sie nun mit den UP/DOWN Tasten den
6 / 24
gewünschten Wert aus und bestätigen sie erneut mit ENTER. Machen sie das so lange bis alle gewünschten kanäle so eingestellt sind wie sie es wünschen. Mit Menü wechseln sie erneut das Menü.
Mit den UP/DOWN Tasten können sie nun zum nächsten Menü schalten:
Menü 4:
Test Drücken sie ENTER. Das Display zeigt einen der folgenden Punkte an:
MAuto: x,
Drücken sie ENTER um das Menü einzustellen. Drücken sie nun
UP/DOWN Tasten um den Wert einzustellen. Sie können hier die
Auto Movement Programme 1-9 abspielen. Drücken sie ENTER um zu speichern und MENÜ um in des vorherige Menü zurück zu kehren.
Auto:x
MSound:x
Sound:x
Tilt:xxx
Drücken sie ENTER um das Menü einzustellen. Drücken sie nun
UP/DOWN Tasten um den Wert einzustellen. Sie können hier die
Auto LED Programme 1-9 abspielen. Drücken sie ENTER um zu speichern und MENÜ um in des vorherige Menü zurück zu kehren.
Drücken sie ENTER um das Menü einzustellen. Drücken sie nun
UP/DOWN Tasten um den Wert einzustellen. Sie können hier die
Soundactiven Movement Programme 1-9 abspielen. Drücken sie
ENTER um zu speichern und MENÜ um in des vorherige Menü zurück zu kehren.
Drücken sie ENTER um das Menü einzustellen. Drücken sie nun
UP/DOWN Tasten um den Wert einzustellen. Sie können hier die
Soundactiven LED Programme 1-9 abspielen. Drücken sie
ENTER um zu speichern und MENÜ um in des vorherige Menü zurück zu kehren.
Drücken sie ENTER um das Menü einzustellen. Drücken sie nun
UP/DOWN Tasten um den Wert einzustellen. Sie können hier die
Tilt auf einen bestimmten festen Wert stellen. Funktioniert nur mit
Auto und Sound wenn kein Movement eingestellt ist. Drücken sie
ENTER um zu speichern und MENÜ um in des vorherige Menü zurück zu kehren.
Mit den UP/DOWN Tasten können sie nun zum nächsten Menü schalten
Menü 5
PassWord Drücken sie ENTER. Das Display zeigt PassWord UnLock, oder PassWord Lock.
Wählen sie mit UP/DOWN die gewünschte Option aus.
PassWord UnLock Drücken sie ENTER. Sie können nun mit den
UP/DOWN Tasten und ENTER 3 Zahlen
7 / 24
PassWord Lock eingeben. Das Default Passwort ist 988.
Bestätigen sie mit ENTER. Um die Unlock
Funktion zu ermöglichen schalten sie das Gerät aus und wieder ein!
Gehen sie wie bei Unlock vor nur wählen sie dieses Mal ihre eigenen drei Zahlen oder das
Standard Passwort und schützen sie das Gerät mit einem Passwort vor ungewolltem Zugriff.
Schalten sie das Gerät erneut aus und ein um die Änderung wirksam zu machen.
Mit den UP/DOWN Tasten können sie nun zum nächsten Menü schalten
Menü 6
Re-Def Bestätigen sie mit ENTER um die Funktionen des Gerätes auf Werkseinstellungen zurück zu setzen
Mit den UP/DOWN Tasten können sie nun zum nächsten Menü schalten
Menü 7
Reset Bestätigen sie mit ENTER um die Funktionen des Gerätes zu reseten und neu zu starten.
4.1. Passwort zurück setzen
Um das Passwort zurück zu setzen auf das Werkspasswort gehen sie wie folgt vor:
MENU
→
UP/ DOWN
→
MENU SYS-SET
→
ENTER
→
UP/ DOWN
→
SYS-SET Password
→
ENTER
→
UP/
DOWN
→
NO
→
ENTER
→ password(default 988)
→
ENTER
5. DMX Tabelle
5.1. DMX Tabelle 12 Kanäle
Ch Wert Funktion
8
9
6
7
3
4
1
2
5
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
1 – 7
Tilt
Tilt Fine
Dimmer 0 – 100%
Rot Dimmer 0 – 100%
Grün Dimer 0 – 100%
Blau Dimmer 0 – 100%
Weiss Dimmer 0 – 100%
Strobe langsam bis schnell
Tilt Stand Alone Program 1
8 / 24
120 – 126
127 – 133
134 – 140
141 – 147
148 – 154
155 – 161
162 – 168
169 – 175
176 – 182
183 – 189
190 – 196
197 – 203
204 – 210
211 – 217
218 – 224
225 – 231
232 – 238
239 – 245
246 – 255
10 0 – 255
8 – 14
15 – 21
22 – 28
29 – 35
36 – 42
43 – 49
50 – 56
57 – 63
64 – 70
71 – 77
78 – 84
58 – 91
92 – 98
99 – 105
106 – 112
113 – 119
11 0 – 255
12 0 – 254
255
Tilt Stand Alone Program 2
Tilt Stand Alone Program 3
Tilt Stand Alone Program 4
Tilt Stand Alone Program 5
Tilt Stand Alone Program 6
Tilt Stand Alone Program 7
Tilt Stand Alone Program 8
Tilt Stand Alone Program 9
Kein Tilt nur LED Stand Alone Program 1
Kein Tilt nur LED Stand Alone Program 2
Kein Tilt nur LED Stand Alone Program 3
Kein Tilt nur LED Stand Alone Program 4
Kein Tilt nur LED Stand Alone Program 5
Kein Tilt nur LED Stand Alone Program 6
Kein Tilt nur LED Stand Alone Program 7
Kein Tilt nur LED Stand Alone Program 8
Kein Tilt nur LED Stand Alone Program 9
Tilt Stand Alone Sound Program 1
Tilt Stand Alone Sound Program 2
Tilt Stand Alone Sound Program 3
Tilt Stand Alone Sound Program 4
Tilt Stand Alone Sound Program 5
Tilt Stand Alone Sound Program 6
Tilt Stand Alone Sound Program 7
Tilt Stand Alone Sound Program 8
Tilt Stand Alone Sound Program 9
Kein Tilt nur LED Stand Alone Sound Program 1
Kein Tilt nur LED Stand Alone Sound Program 2
Kein Tilt nur LED Stand Alone Sound Program 3
Kein Tilt nur LED Stand Alone Sound Program 4
Kein Tilt nur LED Stand Alone Sound Program 5
Kein Tilt nur LED Stand Alone Sound Program 6
Kein Tilt nur LED Stand Alone Sound Program 7
Kein Tilt nur LED Stand Alone Sound Program 8
Kein Tilt nur LED Stand Alone Sound Program 9
Geschwindigkeit für Stand Alone von langsam bis schnell
Tilt Laufgeschwindigkeit von langsam bis schnell
Keine Funktion
Reset
9 / 24
5.2. DMX Tabelle 18 Kanäle
Ch Wert Funktion
4
5
6
1
2
3
7
8
9
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
92 – 98
99 – 105
106 – 112
113 – 119
120 – 126
127 – 133
134 – 140
141 – 147
148 – 154
155 – 161
162 – 168
169 – 175
176 – 182
183 – 189
190 – 196
197 – 203
204 – 210
211 – 217
1 – 7
8 – 14
15 – 21
22 – 28
29 – 35
36 – 42
43 – 49
50 – 56
57 – 63
64 – 70
71 – 77
78 – 84
58 – 91
Tilt
Tilt Fine
Dimmer 0 – 100%
Rot Dimmer 0 – 100%
Grün Dimer 0 – 100%
Blau Dimmer 0 – 100%
Weiss Dimmer 0 – 100%
Strobe langsam bis schnell
Tilt Stand Alone Program 1
Tilt Stand Alone Program 2
Tilt Stand Alone Program 3
Tilt Stand Alone Program 4
Tilt Stand Alone Program 5
Tilt Stand Alone Program 6
Tilt Stand Alone Program 7
Tilt Stand Alone Program 8
Tilt Stand Alone Program 9
Kein Tilt nur LED Stand Alone Program 1
Kein Tilt nur LED Stand Alone Program 2
Kein Tilt nur LED Stand Alone Program 3
Kein Tilt nur LED Stand Alone Program 4
Kein Tilt nur LED Stand Alone Program 5
Kein Tilt nur LED Stand Alone Program 6
Kein Tilt nur LED Stand Alone Program 7
Kein Tilt nur LED Stand Alone Program 8
Kein Tilt nur LED Stand Alone Program 9
Tilt Stand Alone Sound Program 1
Tilt Stand Alone Sound Program 2
Tilt Stand Alone Sound Program 3
Tilt Stand Alone Sound Program 4
Tilt Stand Alone Sound Program 5
Tilt Stand Alone Sound Program 6
Tilt Stand Alone Sound Program 7
Tilt Stand Alone Sound Program 8
Tilt Stand Alone Sound Program 9
Kein Tilt nur LED Stand Alone Sound Program 1
Kein Tilt nur LED Stand Alone Sound Program 2
Kein Tilt nur LED Stand Alone Sound Program 3
Kein Tilt nur LED Stand Alone Sound Program 4
10 / 24
218 – 224
225 – 231
232 – 238
239 – 245
246 – 255
10 0 – 255
11 0 – 255
12
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
13
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
14
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
15
242 – 255
Kein Tilt nur LED Stand Alone Sound Program 5
Kein Tilt nur LED Stand Alone Sound Program 6
Kein Tilt nur LED Stand Alone Sound Program 7
Kein Tilt nur LED Stand Alone Sound Program 8
Kein Tilt nur LED Stand Alone Sound Program 9
Geschwindigkeit für Stand Alone von langsam bis schnell
Tilt Laufgeschwindigkeit von langsam bis schnell
LED 1
Keine Funktion
0 – 100% Rot
0 – 100% Grün
0 – 100% Blau
0 – 100% Weiss
0 – 100% Rot + Grün
0 – 100% Rot + Blau
0 – 100% Grün + Blau
0 – 100% Rot + Grün + Blau
0 – 100% Rot + Grün + Blau + Weiss
LED 2
Keine Funktion
0 – 100% Rot
0 – 100% Grün
0 – 100% Blau
0 – 100% Weiss
0 – 100% Rot + Grün
0 – 100% Rot + Blau
0 – 100% Grün + Blau
0 – 100% Rot + Grün + Blau
0 – 100% Rot + Grün + Blau + Weiss
LED 3
Keine Funktion
0 – 100% Rot
0 – 100% Grün
0 – 100% Blau
0 – 100% Weiss
0 – 100% Rot + Grün
0 – 100% Rot + Blau
0 – 100% Grün + Blau
0 – 100% Rot + Grün + Blau
0 – 100% Rot + Grün + Blau + Weiss
LED 4
11 / 24
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
16
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
17
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
18 0 – 254
255
Keine Funktion
0 – 100% Rot
0 – 100% Grün
0 – 100% Blau
0 – 100% Weiss
0 – 100% Rot + Grün
0 – 100% Rot + Blau
0 – 100% Grün + Blau
0 – 100% Rot + Grün + Blau
0 – 100% Rot + Grün + Blau + Weiss
LED 5
Keine Funktion
0 – 100% Rot
0 – 100% Grün
0 – 100% Blau
0 – 100% Weiss
0 – 100% Rot + Grün
0 – 100% Rot + Blau
0 – 100% Grün + Blau
0 – 100% Rot + Grün + Blau
0 – 100% Rot + Grün + Blau + Weiss
LED 6
Keine Funktion
0 – 100% Rot
0 – 100% Grün
0 – 100% Blau
0 – 100% Weiss
0 – 100% Rot + Grün
0 – 100% Rot + Blau
0 – 100% Grün + Blau
0 – 100% Rot + Grün + Blau
0 – 100% Rot + Grün + Blau + Weiss
Keine Funktion
Reset
12 / 24
6. Safety instructions
•
This device is suitable for indoor use only.
•
All modifications to the device will void the warranty.
•
Repairs are to carry out by skilled personnel only.
•
Use only fuses of the same type and original parts as spare parts.
•
Protect the unit from rain and humidity to avoid fire and electric shocks.
•
Make sure to unplug the power supply before opening the housing.
6.1. FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not using the device for an extended period of time, be sure to disconnect the plug from the receptacle
.
13 / 24
Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified personnel. All electrical and mechanical connections have to be carried out according to the European safety standards.
7. Start Up
Thanks for using our ARC X-One. Carefully unpack the box and check the contents to ensure that all parts are present and in good conditions. If anything looks as if it has been damaged in transit, notify the shipper immediately and keep the packing material for inspection. Again, please save the carton and all packing materials. If a fixture must be returned to manufacturer, it is important that the fixture has to be returned in the original manufacturer box and packing.
7.1. Content of the package:
1 x ARC X-One
1 x Manual
1 x Power Plug IEC
1 x DMX signal cable XLR
8. Set Up
8.1. Installation
To mount this item to a truss system it has to be flown by two different flying systems. You should use two truss clamps to do so, and you have to use an additional safety rope to secure the unit against falling down. Each clamp or mounting part has to be able to hold 10 times the weight of the Arc X-
One. Alternating you can stand the item on the ground on its rubber feet. If you do that make sure that the unit is secured against kicking it from the stage.
14 / 24
8.2. Button explanation
DMX IN
DMX OUT
POWER IN
Function of the buttons:
MENU
UP
Down
ENTER
8.3. Wiring
Changes the function main menu
Steps up through the different pages
Or increases the value if you set up numbers.
Steps down through the different pages
Or decreases the value if you set up numbers.
Confirms your changes.
Here you can plug your dmx signal cable coming from your console or master slave mode from your master unit
From here you can connect and daisy chain the next unit, make sure you are working according the DMX512 restrictions!
Here you can plug the included power plug cable.
Make sure first to plug the cable into the item and then into the mains!
15 / 24
8.3.1. DMX Cable
Cables must have a male XLR connector on one end and a female XLR connector on the other end.
A word on termination: DMX is a resilient communication protocol, however errors still occasionally occur. Termination reduces signal errors, and therefore best practices include the usage of a terminator in all circumstances. If you are experiencing problems with erratic fixture behavior, especially over long signal cable runs, a terminator may help to improve the performance.
To build your own DMX Terminator: Obtain a 120-ohm, 1/4-watt resistor, and wire it between pins 2&3 of the last fixture. They are also readily available from specialty retailers.
The DMX Restriction says that you are not allowed to daisy chain more than 32 units and that you are not allowed to use more than 100m cable in between. If you need more cable or more unites to control, we recommend the use of a DMX booster or a multiconnector.
9. Using the menu
Here we explain the menu functions and how you can influence or set up them.
Menu 1
DMX 512 Press ENTER. Now the display shows DMX 512 18CH or DMX512 12CH.
In this menu you can adjust how many channels you want to use to control this unit by DMX. Use the UP/DOWN Buttons to set 12 or 18Ch. Press
ENTER again to enter the address menu. Here you can use the UP/DOWN
Buttons to adjust your dmx start address from 1 – 512. Press again ENTER to confirm your operation and to save your settings.
With the UP/DOWN Buttons you can step to the next menu:
Menu 2
Tilt Press ENTER. Now the display shows Tilt No or Tilt Yes..Here you can set up if you want to invert Tilt or not. No for not. Use the UP/DOWN Buttons to change the desired value and press ENTER to confirm and safe.
With the UP/DOWN Buttons you can step to the next menu:
16 / 24
Menu 3
Manual Press ENTER. Now the display shows CH01 – CH18 with a following number with 3 digits. Here you can adjust manually every Channel which you would control by dmx normal. Choose the right channel by using the UP/DOWN
Buttons, then confirm with ENTER, now use the UP/DOWN Buttons for choosing the desired value, and confirm again with ENTER. Repeat this step until you set all channels to the desired values. With MENU you can step back to the former menu.
With the UP/DOWN Buttons you can step to the next menu:
Menu 4
Test Press Enter and the Display shows one of the following points:
MAuto: x,
Auto:x
Press Enter to enter the menu. Now use the UP/DOWN Buttons to change the value. You can choose from the Auto Movement
Program 1-9. Press again ENTER to confirm and save your settings.
Press Enter to enter the menu. Now use the UP/DOWN Buttons to change the value. You can choose from the Auto LED Program 1-
9. Press again ENTER to confirm and save your settings.
MSound:x
Sound:x
Tilt:xxx
Press Enter to enter the menu. Now use the UP/DOWN Buttons to change the value. You can choose from the Sound Movement
Program 1-9. Press again ENTER to confirm and save your settings.
Press Enter to enter the menu. Now use the UP/DOWN Buttons to change the value. You can choose from the Sound LED Program
1-9. Press again ENTER to confirm and save your settings.
Press Enter. Now you can use the UP/DOWN Buttons tos et a fixed value from 1-512 for the Tilt axis. Works only while there is no other movement set. Press again ENTER to confirm and save.
With the UP/DOWN Buttons you can step to the next menu:
Menu 5
PassWord Press ENTER. The Display shows PassWord UnLock, or PassWord Lock.
Choose with UP/DOWN the desired menu to set up.
PassWord UnLock
Press ENTER. Now you can set up three numbers by using ENTER and UP/DOWN buttons. Set the correct three numbers to unlock the unit. The changes will be valid when the unit
17 / 24
Menu 7
Reset
PassWord Lock was turned off and has been turned on again.
The Default password is 988.
Proceed as with unlock but in this case choose your own three numbers to set a new password to secure the unit from unwanted users.
Power off the fixture and turn it on again to validate the changes.
With the UP/DOWN Buttons you can step to the next menu:
Menu 6
Re-Def- Press Enter to set back the unit to manufactureres settings.
With the UP/DOWN Buttons you can step to the next menu:
Press Enter to reset the units functions
9.1. Erase a password:
To set back the password to default do as described here:
MENU
→
UP/ DOWN
→
MENU SYS-SET
→
ENTER
→
UP/ DOWN
→
SYS-SET Password
→
ENTER
→
UP/
DOWN
→
NO
→
ENTER
→ password(default 988)
→
ENTER
10. DMX Table
10.1.
Ch Value
6
7
4
5
8
9
1
2
3
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
1 – 7
8 – 14
15 – 21
22 – 28
29 – 35
DMX Table with 12 Channels
Function
Tilt
Tilt Fine
Dimmer 0 – 100%
Red Dimmer 0 – 100%
Green Dimer 0 – 100%
Blue Dimmer 0 – 100%
White Dimmer 0 – 100%
Strobe slow to fast
Tilt Stand Alone Program 1
Tilt Stand Alone Program 2
Tilt Stand Alone Program 3
Tilt Stand Alone Program 4
Tilt Stand Alone Program 5
18 / 24
10 0 – 255
11 0 – 255
12 0 – 254
255
148 – 154
155 – 161
162 – 168
169 – 175
176 – 182
183 – 189
190 – 196
197 – 203
204 – 210
211 – 217
218 – 224
225 – 231
232 – 238
239 – 245
246 – 255
36 – 42
43 – 49
50 – 56
57 – 63
64 – 70
71 – 77
78 – 84
58 – 91
92 – 98
99 – 105
106 – 112
113 – 119
120 – 126
127 – 133
134 – 140
141 – 147
Tilt Stand Alone Program 6
Tilt Stand Alone Program 7
Tilt Stand Alone Program 8
Tilt Stand Alone Program 9
LED only no Tilt Stand Alone Program 1
LED only no Tilt Stand Alone Program 2
LED only no Tilt Stand Alone Program 3
LED only no Tilt Stand Alone Program 4
LED only no Tilt Stand Alone Program 5
LED only no Tilt Stand Alone Program 6
LED only no Tilt Stand Alone Program 7
LED only no Tilt Stand Alone Program 8
LED only no Tilt Stand Alone Program 9
Tilt Stand Alone Sound Program 1
Tilt Stand Alone Sound Program 2
Tilt Stand Alone Sound Program 3
Tilt Stand Alone Sound Program 4
Tilt Stand Alone Sound Program 5
Tilt Stand Alone Sound Program 6
Tilt Stand Alone Sound Program 7
Tilt Stand Alone Sound Program 8
Tilt Stand Alone Sound Program 9
LED only no Tilt Stand Alone Sound Program 1
LED only no Tilt Stand Alone Sound Program 2
LED only no Tilt Stand Alone Sound Program 3
LED only no Tilt Stand Alone Sound Program 4
LED only no Tilt Stand Alone Sound Program 5
LED only no Tilt Stand Alone Sound Program 6
LED only no Tilt Stand Alone Sound Program 7
LED only no Tilt Stand Alone Sound Program 8
LED only no Tilt Stand Alone Sound Program 9
Speed for stand alone programs slow to fast
Tilt speed from slow to fast
No function
Reset
19 / 24
10.2.
Ch Value
4
5
6
1
2
3
7
8
9
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
92 – 98
99 – 105
106 – 112
113 – 119
120 – 126
127 – 133
134 – 140
141 – 147
148 – 154
155 – 161
162 – 168
169 – 175
176 – 182
183 – 189
190 – 196
197 – 203
204 – 210
211 – 217
1 – 7
8 – 14
15 – 21
22 – 28
29 – 35
36 – 42
43 – 49
50 – 56
57 – 63
64 – 70
71 – 77
78 – 84
58 – 91
DMX Table with 18 Channels
Function
Tilt
Tilt Fine
Dimmer 0 – 100%
Red Dimmer 0 – 100%
Green Dimer 0 – 100%
Blue Dimmer 0 – 100%
White Dimmer 0 – 100%
Strobe slow to fast
Tilt Stand Alone Program 1
Tilt Stand Alone Program 2
Tilt Stand Alone Program 3
Tilt Stand Alone Program 4
Tilt Stand Alone Program 5
Tilt Stand Alone Program 6
Tilt Stand Alone Program 7
Tilt Stand Alone Program 8
Tilt Stand Alone Program 9
LED only no Tilt Stand Alone Program 1
LED only no Tilt Stand Alone Program 2
LED only no Tilt Stand Alone Program 3
LED only no Tilt Stand Alone Program 4
LED only no Tilt Stand Alone Program 5
LED only no Tilt Stand Alone Program 6
LED only no Tilt Stand Alone Program 7
LED only no Tilt Stand Alone Program 8
LED only no Tilt Stand Alone Program 9
Tilt Stand Alone Sound Program 1
Tilt Stand Alone Sound Program 2
Tilt Stand Alone Sound Program 3
Tilt Stand Alone Sound Program 4
Tilt Stand Alone Sound Program 5
Tilt Stand Alone Sound Program 6
Tilt Stand Alone Sound Program 7
Tilt Stand Alone Sound Program 8
Tilt Stand Alone Sound Program 9
LED only no Tilt Stand Alone Sound Program 1
LED only no Tilt Stand Alone Sound Program 2
LED only no Tilt Stand Alone Sound Program 3
LED only no Tilt Stand Alone Sound Program 4
20 / 24
218 – 224
225 – 231
232 – 238
239 – 245
246 – 255
10 0 – 255
11 0 – 255
12
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
13
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
14
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
15
242 – 255
LED only no Tilt Stand Alone Sound Program 5
LED only no Tilt Stand Alone Sound Program 6
LED only no Tilt Stand Alone Sound Program 7
LED only no Tilt Stand Alone Sound Program 8
LED only no Tilt Stand Alone Sound Program 9
Speed for stand alone programs slow to fast
Tilt speed from slow to fast
LED 1
No Function
0 – 100% Red
0 – 100% Green
0 – 100% Blue
0 – 100% White
0 – 100% Red + Green
0 – 100% Red + Blue
0 – 100% Green + Blue
0 – 100% Red + Green + Blue
0 – 100% Red + Green + Blue + White
LED 2
No Function
0 – 100% Red
0 – 100% Green
0 – 100% Blue
0 – 100% White
0 – 100% Red + Green
0 – 100% Red + Blue
0 – 100% Green + Blue
0 – 100% Red + Green + Blue
0 – 100% Red + Green + Blue + White
LED 3
No Function
0 – 100% Red
0 – 100% Green
0 – 100% Blue
0 – 100% White
0 – 100% Red + Green
0 – 100% Red + Blue
0 – 100% Green + Blue
0 – 100% Red + Green + Blue
0 – 100% Red + Green + Blue + White
LED 4
21 / 24
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
16
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
17
0 – 1
2 – 31
32 – 61
62 – 91
92 – 121
122 – 151
152 – 181
182 – 211
212 – 241
242 – 255
18 0 – 254
255
No Function
0 – 100% Red
0 – 100% Green
0 – 100% Blue
0 – 100% White
0 – 100% Red + Green
0 – 100% Red + Blue
0 – 100% Green + Blue
0 – 100% Red + Green + Blue
0 – 100% Red + Green + Blue + White
LED 5
No Function
0 – 100% Red
0 – 100% Green
0 – 100% Blue
0 – 100% White
0 – 100% Red + Green
0 – 100% Red + Blue
0 – 100% Green + Blue
0 – 100% Red + Green + Blue
0 – 100% Red + Green + Blue + White
LED 6
No Function
0 – 100% Red
0 – 100% Green
0 – 100% Blue
0 – 100% White
0 – 100% Red + Green
0 – 100% Red + Blue
0 – 100% Green + Blue
0 – 100% Red + Green + Blue
0 – 100% Red + Green + Blue + White
No function
Reset
22 / 24
11. Technische Daten / Technical data
Volt Voltage AC 110V – 240V 50/60Hz
Strombedarf Power consumption 120W
Leuchtquelle
Control
Kanäle
Schutzklasse
Arbeitstemperatur
Gewicht
Maße
Light Source
Control
Channels
IP Rate
6x 10W RGBW 4in1
DMX, Stand Alone, Sound To Light, Master Slave
12/18
ÎP20
Working temperature 0°C – 40°C
Weight 7kg
Measurement 580 x 80 x 200mm
23 / 24
Importeur:
B & K Braun GmbH
Industriestraße 2
D-76307 Karlsbad www.bkbraun.com
[email protected]
24 / 24
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Sicherheitshinweise
- 3 Hinweise für den sicheren und einwandfreien Gebrauch
- 4 Einführung
- 4 Packungsinhalt
- 4 Einrichten
- 4 Installation
- 5 Einstellungen
- 5 Verkabelung
- 6 DMX Kabel
- 6 Bedienung des Menüs
- 8 Passwort zurück setzen
- 8 DMX Tabelle
- 8 DMX Tabelle 12 Kanäle
- 10 DMX Tabelle 18 Kanäle
- 13 Safety instructions
- 13 FOR SAFE AND EFFICIENT OPERATION
- 14 Start Up
- 14 Content of the package
- 14 Set Up
- 14 Installation
- 15 Button explanation
- 15 Wiring
- 16 DMX Cable
- 16 Using the menu
- 18 Erase a password
- 18 DMX Table
- 18 DMX Table with 12 Channels
- 20 DMX Table with 18 Channels
- 23 Technische Daten / Technical data