Acer | C112 | User`s guide | Acer C112 User`s guide

Acer Projector
C112/LB100/LK-WV20 Series
User's Guide
Copyright © 2010. Acer Incorporated.
All Rights Reserved.
Acer Projector C112/LB100/LK-WV20 Series User's Guide
Original Issue: 12/2010
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector C112/LB100/LK-WV20 Series
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."
iii
Information for Your Safety and
Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright light
may hurt your eyes.
Turn on the projector first and then signal sources.
Do not place the product in the following environments:
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
Locations near fire alarms.
•
•
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
•
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
vi
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to stop
before turning main power off.
Do not touch the air outlet grille and bottom plate which become hot.
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots are clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
"Lamp(s) contain Mercury,
Dispose Properly."
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
viii
First Thing First
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the projector provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
Turn on the projector first and then the signal sources.
When changing the lamp, please allow the projector to cool down, and follow all
changing instructions.
Do not use lens cap when projector is in operation.
First Thing First
iii
viii
Usage Notes
viii
Precautions
viii
Introduction
1
Product Features
1
Package Overview
2
Projector Overview
3
Projector Outlook
3
Control Panel
4
Remote Control Layout
5
Using the projector battery
7
Getting Started
Connecting the Projector
8
8
Connecting a USB disk/stick (to the USB A connector) 8
Connecting a computer (to the USB B connector)
Turning the Projector On/Off
9
11
Turning On the Projector
11
Turning Off the Projector
12
Adjusting the Projected Image
13
Adjusting the Height of the Projected Image
13
How to Optimize Image Size and Distance
14
User Controls
15
Onscreen Display (OSD) Menus
15
Display Mode
16
Projection
16
Aspect Ratio
17
Language
17
Management
18
Audio
18
Appendices
Troubleshooting
19
19
Contents
Information for Your Safety and Comfort
LED & Alarm Definition Listing
20
Specifications
21
Compatibility Modes
22
Regulations and safety notices
23
1
Product Features
This product is a single-chip DLP® projector, including the following
outstanding features:
•
DLP® technology
•
Native 858 x 480 WVGA resolution
Auto/Full aspect ratio supported
•
NTSC/PAL compatible and HDTV (720p, 1080i) supported
•
Compact size projector facilitates business purposes and home
entertainment
•
Multi-language Onscreen Display (OSD) menus
•
Environmental light source and longer life by LED solution
•
Display over USB (mini type)
•
Apple iPhone AV jack supported
•
Enjoy media playback via USB
•
Acer notebook power adapter compatible (except for the CULV models)
•
Microsoft® Windows® 2000, XP, 7, Vista® OS compliant
English
Introduction
English
2
Package Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
Projector
Power adapter
3.5 mm jack A/V cable
User’s guide (CD-ROM)
USB cable
Acer Projector
Quick start guide
XXXXXX
3V
Remote control
Remote control battery
Carrying case
Projector battery (Optional)
Tripod (Optional)
Acer Multi-media user’s
guide (CD-ROM)
3
English
Projector Overview
Projector Outlook
Front / upper side
3
4
2
5
1
#
Description
1
Projection lens
2
Focus ring
3
Control panel
4
Power key and Power indicator LED:
To turn on the projector, press and hold the power key for 3 seconds.
5
Battery release button
Rear side
#
1
2
3
4
5
6
1
2
3
4
USB A
USB B
AUDIO OUT
AUDIO IN
/AV IN
Description
USB connector (Type A)
USB connector (Type mini B)
Audio output connector
Audio input connector/AV input connector
Remote control receiver
DC IN connector
5
6
DC IN
English
4
Control Panel
#
3
4
1
2
Function
Description
1
Power key and Power
indicator LED
Refer to the "Turning the Projector On/
Off" section.
2
SOURCE
Chooses composite video, USB A or USB B
source.
3
MENU
Launches the Onscreen Display (OSD)
menu, returns to the previous step for the
OSD menu operation or exits the OSD
menu.
4
Four directional select keys
Selects items or makes adjustments to your
selection.
5
1
2
#
3
4
6
5
7
8
9
11
10
17
12
13
14
15
16
icon
Function
Description
1
Infrared
transmitter
Sends signals to the projector.
2
FREEZE
To pause the screen image.
3
POWER
Refer to the "Turning the Projector On/Off"
section.
4
HIDE
Press "HIDE" to hide screen image; press again
to display the image.
5
ASPECT RATIO
To choose the desired aspect ratio.
6
RESYNC
Not applicable.
7
SOURCE
Chooses composite video, USB A, or USB B
source.
8
BACK/STOP
Stops playing media file or go back to an
upper data folder.
9
Enter/Play/Pause
Plays/pauses a media file.
10
Pre./Rewind
Not applicable.
English
Remote Control Layout
English
6
#
icon
Function
Description
11
MENU
•
Launches the Onscreen Display (OSD)
menu, returns to the previous step for the
OSD menu operation or exits the OSD
menu.
•
Confirms your selection of items.
12
Next/Fast forward
Not applicable.
13
USB A
To change source to USB A.
14
USB B
To change source to USB B.
15
AV
To change source to AV.
16
VOL +/-
Increases/decreases the volume.
17
Four directional
select keys
Selects items or makes adjustments to your
selection.
7
Attaching the projector battery:
1
Remove the cap underneath the projector.
2
Align the connectors between the projector and the battery and
attach the battery to the projector securely.
1
2
Removing the projector battery:
Press the button on the side of the projector and detach the battery from the
projector.
English
Using the projector battery
Getting Started
Connecting the Projector
USB
Notebook/PC
Speakers
1
3
2
USB
USB A
USB B
AUDIO IN
/AV IN
AUDIO OUT
DC IN
iPod/iPhone
4
5
6
DVD player,
Set-top box,
HDTV receiver
R W Y
English
8
#
Description
#
4
Description
1
USB cable
USB disk/stick
2
Audio cable
5
3.5 mm jack A/V cable
3
Power adapter
6
3.5 mm jack A/V to RCA cable
Connecting a USB disk/stick (to the USB A connector)
For details, please refer to the Multi-media user’s guide CD supplied with your
projector.
9
To connect the projector to your computer, take a type A to type mini B USB
cable, connect the type A plug to the computer, and the type mini B plug to the
projector.
If it is the first time you connect the projector to your computer, to ensure the
projector can project the image from your computer successfully, please
perform the following steps.
1
Turn on both the projector and computer.
2
Connect both the projector and computer with a USB cable. After
connection, the projector automatically sends an application to your
computer by adding a removable disk.
3
Double-click the executable file and follow the on-screen instruction
to install the required file to your computer.
4
Restart your computer after the installation completes.
5
Run the program "EZ Display" from Start > Programs > EZ Display > EZ
Display. When the program is started, the image on your computer
will be projected. The projected image is scaled to 640 x 480.
(NOTE: Switch the projector input source to USB B before running the
"EZ Display"program.)
English
Connecting a computer (to the USB B connector)
English
10
6
You can select the display area of your computer.
•
Full Screen: Displays the full screen of your computer from the projector.
•
Compatible mode: Sets the computer screen to 640 x 480. That is only partial
screen of the computer will be displayed.
•
To stop projecting the computer screen, click Exit.
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
11
Turning On the Projector
1
Ensure that the power adapter and signal cable are securely connected
or that the projector battery is charged and properly attached. The
Power indicator LED will light red.
DC IN
2
Press and hold
(POWER) on the control panel for 3 seconds or press
(POWER) on the remote control, and the Power indicator LED will
flash blue and then turn to a solid blue.
3
Turn on your source (iPod, iPhone, video player, etc.). The projector
will detect your source automatically.
•
If you connect to multiple sources at the same time, use "SOURCE" on
the remote control to switch between inputs.
English
Turning the Projector On/Off
English
12
Turning Off the Projector
1
To turn the projector off, press
remote control.
(POWER) on the projector or
2
The LED power indicator will turn RED.
3
If the projector will not be used for an extended period, unplug the
power cord from the power outlet.
Note: Whenever the projector automatically shuts down,
contact your local reseller or service center.
13
Adjusting the Height of the Projected Image
The projector is equipped with a fixed foot for adjusting the image height.
You can also use a tripod (optional) to lift the projector.
To raise the image:
•
Release the fixed foot from the bottom of the projector. If the
projector battery is attaching to the projector, detach it before doing
so.
•
If you have a tripod (optional), mount the projector to the tripod by
aligning the threaded hole on the bottom of the projector and the head of
the tripod. Spread the legs of the tripod evenly to ensure the projector is in
a steady position.
To lower the image:
•
Retract the fixed foot.
•
If you are using a tripod (optional), remove the projector from the tripod.
Fixed foot
Tripod
English
Adjusting the Projected Image
English
14
How to Optimize Image Size and Distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
If the projector is 2 m from the screen, good image quality is possible for the
image sizes around 50".
Note: Remind as below figure, the space of 76 cm height is
required when the projector is located at 2 m distance.
50"
B
Height:
76 cm
From
base to
top of
image
A
2m
Desired distance
Screen Size
Desired
From base to
Distance Diagonal
top of image
(m)
(inch) W (cm) x H (cm)
(cm)
<A>
<B>
<C>
0.6
15
33 x 19
23
0.8
20
44 x 25
30
1
25
55 x 31
38
1.5
37
83 x 47
56
2
50
110 x 62
76
2.5
62
138 x 78
94
3
75
166 x 93
114
3.5
87
193 x 109
133
4
100
221 x 124
152
Zoom Ratio: 1.0 x
C
15
English
User Controls
Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the control panel or remote
control.
•
When the OSD is displayed, use
to select an item in the main menu.
After selecting the desired main menu item, press
for feature setting.
to enter a submenu
•
Use
•
Press
on the control panel or remote control, the screen will return to
the main menu.
•
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
to select the desired item.
Main menu
Highlight
English
16
Display Mode
There are three factory presets.
Display Mode
•
Bright: For brightness optimization.
•
Standard: For common environment.
•
Video: For playing video in a bright environment.
•
ECO: Lowers the power consumption, reduces noise,
and extends the lamp life.
Projection
Projection
•
Front: The factory default setting.
•
Rear: When you select this function, the projector
reverses the image so that you can project behind a
translucent screen.
17
English
Aspect Ratio
Use this function to choose your desired aspect ratio.
Aspect Ratio
•
Full: Resizes image to fit full screen by width (858 pixels)
and height (480 pixels).
•
Auto: Keeps the image with original width-height ratio
and maximize the image to fit native horizontal or
vertical pixels.
Language
Language
Sets a language for the OSD menus. Use
select your preferred language.
to
English
18
Management
Auto Shutdown
The projector will automatically shut down while there
is no signal input detected after the setting time.
Audio
Volume
Press
to select if you want to mute, decrease, or
increase the projector speaker volume.
19
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
#
1
2
3
Problem
No image appears
onscreen
Solution
•
Make sure all the cables are correctly connected as
described in the "Getting Started" section.
•
Ensure none of the connector pins are bent or
broken.
•
Make sure the projector is switched on.
Image is out of
focus
•
•
Adjusts the focus ring on the projector lens.
Image is too small
or too large
•
Move the projector closer to or further from the
screen.
•
Press "MENU" on the control panel or remote
control. Go to "Aspect Ratio" and try different
settings.
Make sure the projection screen is within the
required distance of 1.92 to 12.8 feet (0.6 to 4
meters). Refer to the "How to Optimize Image Size
and Distance" section for more information.
4
Image has slanted
sides
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
5
Image is reversed
•
Select "Projection" on the OSD and adjust the
projection direction.
6
The projector
stops responding
to all controls
•
If possible, turn off the projector, then unplug the
power cord and wait at least 30 seconds before
reconnecting power.
English
20
LED & Alarm Definition Listing
LED Messages
Message
Power LED
Red
Blue
Standby
(Power cord plugged in)
V
--
Power on process
--
Quick flashing
Power on
--
V
Fan error
Repeatedly flash twice in a
row.
--
Thermal error
Repeatedly flash thrice in a
row.
--
Battery run out
Repeatedly flash four times
in a row.
--
21
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
Projection system
DLP™
Resolution
WVGA (858 x 480)
PC compatibility
Up to 1280 x 800 (640 x 480 in video preferred)
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N)
Multimedia compatibility
480/576P preferred. Please check the Multi-media user’s
guide CD for details.
Aspect ratio
Full (native), Auto
Displayable colors
24 bits
Projection lens
F = 1.7, f = 12 mm, Manual Focus
Projection screen size
(diagonal)
15" (38 cm) - 100" (253 cm)
Projection distance
1.92' (0.6 m) - 12.8' (4 m)
Throw ratio
25" @ 1 m (1.81:1)
Weight
< 250g
Dimensions (W x D x H)
91.5 x 137 x 22.5 mm
Power supply
19V
2.1A
(Adapter 19V/2.15A, Class II)
Power consumption
Max. 50 W
Standby < 1 W
Operating temperature
0ºC to 35ºC / 32ºF to 95ºF
Projector battery type
Detachable battery pack
Projector battery capacity
2800mAhx6, 3S2P
Projector battery life
1.6 hr/Bright, 2 hr/STD
I/O connectors
•
•
•
•
•
Standard package contents •
Accessory (optional)
DC IN x 1
Audio/AV input x 1
Audio output x 1
USB (Type A) x 1: for multimedia
USB (Type mini B) x 1
AC adapter x 1
•
•
•
•
•
•
•
•
USB cable x 1 (Type mini B to type A)
•
•
Battery x 1 (for the projector)
3.5 mm jack A/V cable x 1
Remote control x 1
Battery x 1 (for the remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Carrying case x 1
Acer Multi-media user’s guide (CD-ROM) x 1
Tripod x 1
*Design and specifications are subject to change without notice.
English
Specifications
English
22
*Design and specifications are subject to change without notice.
Compatibility Modes
1
2
PC Signal
Mode
Resolution
VGA_60
640 x 480
SVGA_60
800 x 600
XGA_60
1024 x 768
WXGA_60
1280 x 720
WXGA_60
1280 x 768
WXGA_60
1280 x 800
Remark
Video clips and PowerPoint files
presentation preferred
Video Signal
Video mode
NTSC
V.Frequency [Hz] H.Frequency [KHz]
60
15.73
fsc (MHz)
3.58
PAL
50
15.63
4.43
PAL-M
60
15.73
3.58
PAL-N
50
15.63
3.58
PAL-60
60
15.73
4.43
NTSC4.43
60
15.73
4.43
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
English
Regulations and safety notices
English
23
English
24
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby, declares that this projector series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact a local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
English
List of applicable countries
English
25
English
26
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it
Hereby declare that:
Product:
Projector
Trade Name:
Acer
Model Number:
KWV0015/LB100/LK-WV20 series
Machine Type:
C112 series
Is compliant with the essential requirements and other relevant provisions of the following EC
directives, and that all the necessary steps have been taken and are in force to assure that production
units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B
-. EN55024
-. EN61000-3-2 Class A
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized
standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in
Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous
material are:
0.1%
Polybrominated Biphenyls (PBB’s)
Mercury
Lead
0.1%
Polybrominated Diphenyl Ethers (PBDE’s)
0.1%
0.1%
Hexavalent Chromium
0.1%
Cadmium
0.01%
Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
The standards listed below are applied to the product if built with WLAN module or wireless
keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:
•
Article 3.1(a) Health and Safety
-. EN60950-1
-. EN62311
•
Article 3.1(b) EMC
-. EN301 489-1
-. EN301 489-17
•
Article 3.2 Spectrum Usages
-. EN300 328
-. EN301 893 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2010.
Easy Lai /Manager
Regulation Center, Acer Inc.
Dec. 1, 2010 Date
English
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
English
27
English
28
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
KWV0015/LB100/LK-WV20 series
Machine Type:
C112 series
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
Download PDF