HP Compaq dc5750 MT Specifications

HP Compaq dc5750 MT Specifications
Illustrated Parts & Service Map
HP Compaq dc5750 Microtower
Business PC
© 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Document Number 439134-002
2nd Edition November 2006.
Cables
1
SATA HDD cable, 18-in. lg (1 straight, 1 angle end) 393958-001
2
SATA HDD cable, 19.5-in. lg (2 straight ends)
391739-001
*
Diskette drive cable
439216-001
3
Front I/O with USB, audio cables, power/LED
cable, switch and switch holder
432862-001
*Not shown
Keyboards (not illustrated)
382925-xxx
396215-xxx
382926-xxx
382927-xxx
393670-xxx
396219-xxx
369217-xxx
PS/2, Basic
PS/2, Basic, 105 key
USB, Basic
USB, Basic, BG1650
USB SmartCard
USB, SmartCard, 105 key
USB, Basic, 105 key
Key Specifications
-171
Arabic[]
Processor Type:
AMD Athlon 64 Dual Core, AMD Athlon 64, and
AMD Sempron 64 with HyperTransport
RAM Type:
DDR PC2-5300 non-ECC
Maximum RAM Supported:
4 GB
Expansion Bus:
PCI 2.3 (2), PCI-E x1 (1), PCI-E x16 (1)
Graphics Adapter
Integrated controller. PCI-E support.
Hard drive interface:
SATA 3.0 Gb/s
I/O Interfaces:
Serial (1 std + 1 optional), parallel (1), USB 2.0 (8), RJ45 (1), front and rear audio jacks (2 each), P/S2 (2), and
VGA (1)
-181
Korean (Hangul)
BHCSY[1]
-B41
LA Spanish[4]
-161
Brazilian Portuguese[1]
-201
Netherlands[8]
-331
Belgian
[4]
-AD1
-221
Norwegian
-081
PRC
[1]
Estonian[8]
-CA1
Portuguese[1]
Finnish[1]
-351
Romanian[7]
[2]
-051
Russian
-DE1
Slovakian[1]
-231
French Canadian[1]
-121
Spanish[1]
-071
German[2]
-041
Swedish[2]
-101
Greek[3]
-151
Swiss[2]
-111
Hebrew[1]
-BB1
Taiwanese[1]
-AB1
Hungarian[1]
-211
Thai[1]
-281
Czech
[1]
Danish
[2]
French
Spare Parts
-DF1
Kazakh[8]
[2]
French Arabic
[1]
[1]
-091
-AA1
[3]
-131
-271
-251
-DD1
Turkish
-141
International[1]
-B31
U.S.[1]
-001
Italian[2]
-061
Ukrainian[9]
-BD1
-291
[1]
-031
Icelandic
Japanese
[8]
[1]
[1]
U.K.
[1]
not for 382927-xxx, 396215-xxx, 396217-xxx, or 396219-xxx
not for 396215-xxx, 396217-xxx, or 396219-xxx
[3] not for 382926-xxx, 382927-xxx, 396217-xxx, or 396219-xxx
[4]
not for 382927-xxx, 396217-xxx, or 396219-xxx
[5]
only for 396215-xxx and 296219-xxx
[6]
only for 396215-xxx, 396217-xxx, and 382925-xxx
[7] only for 382925-xxx and 382926-xxx
[8] only for 393670-xxx
[9]
only for 382925-xxx, 382926-xxx and 396217
[2]
System Unit
1
Chassis
not spared
2
Front bezel assembly with 3.5-in. bezel blank (not
shown) and 5.25 in. bezel blank (item 5)
432864-001
3
Access panel
433124-001
4
Power supply, 300W
404795-001
5
5.25-in bezel blank
335937-005
* Not shown
dc5750 Illustrated Parts & Service Map, MT Chassis
439134-002
page 1
Standard and Optional Boards
Memory modules, non-ECC, DDR2
1
256 MB, PC2-5300, CL5
396519-001
*
512 MB, PC2-5300, CL5
396520-001
*
1 GB, PC2-5300, CL5
398038-001
System Boards with thermal grease, alcohol pad, and CPU socket cover
Miscellaneous Parts
2
Standard board
Miscellaneous screw kit, includes:
*
Board for vPro applications without embedded secu- 434370-001
rity (Russia only)
432861-001
*
#6-32 x .250 hitop screw with serrations
(192308-001)(14 ea)
AMD Sempron64 processor with 800 MHz HyperTransport
*
(192308-002) (4 ea)
*
3400+, 1.8 GHz, 256K cache, 1.6 GHz FSB
433506-001
*
(192308-003) (6 ea)
*
3600+, 2.0 GHz, 256K cache, 1.6 GHz FSB
435919-001
*
(106902-001) (2 ea)
*
(334248-001) (4 ea)
AMD Athlon64 processor with 1.0 GHz HyperTransport,
*
3500+, 2.2 GHz, 512 KB cache, 2.0 GHz FSB
435911-001
*
(247481-001) (8 ea)
*
3800+, 2.4 GHz, 512 KB cache, 2.0 GHz FSB
435912-001
*
(247348-001) (8 ea)
*
(368224-002) (2 ea)
AMD Athlon 64 Dual Core processor with 1.0 GHz HyperTransport
414180-001
3800+, 2.0 GHz, 1.0 MB cache, 2.0 GHz FSB
435913-001
*
(101517-067) (12 ea)
*
4200+, 2.2 GHz, 1.0 MB cache, 2.0 GHz FSB
435914-001
1
Chassis fan
432863-001
*
4600+, 2.4 GHz, 1.0 MB cache, 2.0 GHz FSB
435915-001
2
432865-001
*
5000+, 2.6 GHz, 1.0 MB cache, 2.0 GHz FSB
435917-001
Heatsink with alcohol pad, factory-applied thermal
grease, and heatsink shroud
*
1 GB, PC2-5300, CL5
398038-001
3
Fan duct
433123-001
4
Rear I/O panel
435529-001
*
Mouse, PS2, scroll type
390937-001
*
Mouse, USB, scroll type
390939-001
*
Mouse, PS2, optical
417966-001
*
Mouse, USB, optical
390938-001
*
Battery, real-time clock
153099-001
5
Internal speaker
430129-001
*
Second serial port, FH
392414-001
Other boards
*
ATI Radeon X1300Pro, 256 MB, PCIe, with DVI-I
and S-Video output
413023-001
*
ATI Radeon X1300Pro, 256 MB, PCIe, with
DMS59 output and S-Video input
432947-001
*
ATI Radeon X1600XT, 256 MB, PCIe, with DVI-I
and S-Video output
419543-001
*
Standard 1394 PCI card with 2 external and 1
internal ports
393308-001
*
Broadcom 5751 Gigabit NIC, PCIe, FH
393626-001
*
Agere International 56K Modem, FH
398661-001
*
DVI-I to VGA graphics adapter
202997-005
*Not shown
LP = Low profile
FH = Full height
* Not shown
LP = Low profile
FH = Full height
Mass Storage Devices (not illustrated)
Diskette drive with bezel
431452-001
Media card reader, 3.5-in
407187-001
Media card reader, 5.25-in
412838-001
52X SATA CD-ROM drive (APJ only)
419469-001
16X SATA DVD-ROM drive
419496-001
48X SATA CD-ROM drive
419635-001
16X SATA DVDRW L drive with LightScribe
419498-001
16x/48x Combo drive
419497-001
80-GB\7200 RPM SATA hard drive, 8MB cache
432392-001
160-GB\7200 RPM SATA hard drive, 8MB cache
432393-001
250-GB\7200 RPM SATA hard drive, 8MB cache
432394-001
dc5750 Illustrated Parts & Service Map, MT Chassis
439134-002
page 2
System Board
Heading
Option / Description
Storage
(Continued)
Boot Order - Allows you to specify boot order.
Security
Smart Card Options (some models) - Allows you to enable/disable the
Smart Card.
Setup Password - Allows you to set and enable the setup (Administrator)
password.
Power-On Password - Allows you to set and enable power-on password.
Password Options - When any password exists allows you to lock legacy
resources, enable/disable network server mode, specify password
requirement for warm boot, and allows you to enable/disable Setup
Browse Mode.
Embedded Security (some models) - Allows you to enable/disable
Embedded Security and power-on authentication support, reset device to
factory settings, and reset authentication credentials.
Device Security (some models) - Enables/disables all I/O ports, audio,
network controllers, SMBus controller, and embedded security devices.
Network Service Boot - Enables/disables boot from OS on a server.
System IDs - Allows you to set Asset tag, ownership tag, Chassis serial
number, UUID, and keyboard locale setting.
DriveLock Security - Allows you to assign/modify a hard drive password for added security.
OS Security - Allows you to enable/disable Data Execution Prevention
and OS management of mbedded Security Device.
System Board Connectors and Jumpers (position of some untitled components may
vary in location)
CR1
5VAUX LED
P60
E20
Ambient Temperature
P61
SATA1
E49
Password
P62
SATA2
J20
PCI slot 1
P63
SATA3
Setup Security Level - Allows for limited changes to setup options without password.
Power
OS Power Management - Allows you to enable/disable Runtime Power
Management, ACPI S3 Hard Disk Reset, and ACPI S3 PS2 Mouse
Wakeup. Also Allows you to improve Idle Power Savings and to permit
system to awaken when USB device is inserted.
SATA0
Thermal - Allows you to control minimum permitted fan idle speed.
Advanced Features
J21
PCI slot 2
P70
CPU fan (fansink)
J31
PCIE X1
P8
Primary chassis fan (front)
J41
PCIE X16
P9
Chassis fan (rear)
P1
Main power
P150
Card reader
P10
Diskette drive
SW50
Clear CMOS
Power-On Options - Allows you to set:
• POST mode - QuickBoot, FullBoot, or FullBoot every 1-30 days.
• POST messages - Enable/disable
• F9 prompt - Enable/disable
• F10 prompt - Enable/disable
• F12 prompt - Enable/disable
• Option ROM prompt - Enable/disable
• Remote wakeup boot source - Remote server/local hard drive
• After Power Loss - Off/on/previous state
• POST delay - None, 5, 10, 15, or 20 seconds
P11
Aux audio
XBT1
Real-time-clock battery
Onboard Devices - Allows you to set resources or disable onboard system devices.
P23
Front audio
XMM1
DIMM 1
P24
Front USB
XMM2
DIMM 2
P3
CPU power
XMM3
DIMM 3
P5
Power button/LED
XMM4
DIMM 4
P52
Flying serial port
XU1
Processor
P6
Internal speaker
PCI Devices - Lists installed PCI devices with their IRQ settings and
allows you to reconfigure IRQ or disable devices.
PCI VGA Configuration - Allows you to specify which VGA controller
will be used when multiple video adapters are available.
Bus Options (some models) - Allows you to enable/disable PCI SERR#
Generation and PCI VGA palette snooping.
Device Options - Allows you to set:
• Printer Mode - Bi-Directional, EPP & ECP, Output Only
• Num Lock state at power-on - off/on
• S5 Wake on LAN - enable/disable
• Processor cache - enable/disable
• Unique Sleep State Blink Patterns
• Integrated video - enable/disable
• Integrate graphics memory size
• Internal speakers (some models) - enable/disable
• Monitor tracking - enable/disable
• NIC PXE Option ROM Download - enable/disable
System Setup and Boot
Basic system information regarding system information, setup, power management, hardware,
and passwords is maintained in the Setup Utility held in the system ROM. The Setup Utility is
accessed by pressing the F10 key when prompted (on screen) to do so during the boot sequence.
If the screen prompt opportunity is missed, a restart will be necessary.
Computer Setup Menu
Heading
Option/Description
File
System Information - Lists the following main system specifications:
•
•
•
•
Product name
SKU number (some
models)
Processor type/speed/stepping
Cache Size (L1/L2)
System Hardware Interrupts
•
•
•
•
•
Memory size/speed/ no. channels
Integrated MAC Address
System BIOS
Chassis serial number
Asset tracking number
About - Displays copyright notice.
Set Time and Date - Allows you to set system time and date.
Flash System ROM (some models) - Allows you to select a drive containing a new BIOS.
Replicated Setup - Save to Removable Media and Restore from Removable Media
IRQ
System Function
IRQ
System Function
0
Timer Interrupt
8
Real-Time Clock
1
Keyboard
9
Unused
2
Interrupt Controller Cascade
10
Unused, available for PCI
3
Serial Port (COM B)
11
Unused, available for PCI
4
Serial Port (COM A)
12
Mouse
5
Unused, available for PCI
13
Coprocessor
6
Diskette Drive
14
Primary ATA (IDE) Controller
7
Parallel Port (LPT 1)
15
Secondary ATA (IDE) Controller
Default Setup
• Save Current Settings as Default
• Restore Factory Settings as Default
Apply Defaults and Exit - Applies the selected default settings and
clears any established passwords.
Ignore Changes and Exit - Exits Computer setup without applying or
saving any changes.
Save Changes and Exit - Saves changes to system configuration or
default settings and exits Computer Setup.
Storage
Device Configuration - Lists all installed BIOS-controlled storage
devices. The following options are available:
• Diskette Type (Legacy Diskette only) - 3.5” 1.44 MB and 5.25” 1.2
MB
• Drive Emulation of ATAPI Zip drive, hard disk, and ATAPI LS-120
drive
• Multisector Transfers
• Translation Mode
• Translation Parameters
• Default Values IDE/SATA
Storage Options • Removable Media Boot
• Legacy Diskette Write
• BIOS DMA Data Transfers
• SATA Emulation - SATA 0 and 2, SATA 1 and 3, SATA 4 (some
models) SATA 5 (some models)
DPS Self-Test - Allows you to execute self-tests on ATA hard drives.
Computer Setup Menu (Continued)
dc5750 Illustrated Parts & Service Map, MT Chassis
439134-002
page 3
Error Messages
Failsafe Boot Block ROM
The computer comes with a reprogrammable flash system ROM (read only memory). To
upgrade the ROM, download the latest ROM BIOS image from the HP Web site (www.hp.com)
and follow the online GUI/instructions.
Diagnostic LEDs
LED
Color
LED Activity
State/Message
Power
Green
On
Computer on
Power
Green
1 blink every 2 seconds
Normal Suspend Mode
Power
Red
1 blink every second followed
by a 2 second pause
CPU thermal shutdown
Power
Red
3 blinks, 1 blink every second
followed by a 2 second pause
Processor not installed
Power
Red
4 blinks, 1 blink every second
followed by a 2 second pause
Power failure (power supply overload)
3. Turn on power to the system.
Power
Red
5 blinks, 1 blink every second
followed by a 2 second pause
Pre-video memory error
4. The system will automatically flash the ROM. After a successful flash, the system will either
automatically restart or prompt the user to unplug the unit, wait 5 seconds, reattach the power
cord, and then press the power button.
Power
Red
6 blinks, 1 blink every second
followed by a 2 second pause
Pre-video graphics error
Power
Red
7 blinks, 1 blink every second
followed by a 2 second pause
System board failure (ROM
Power
Red
8 blinks, 1 blink every second
followed by a 2 second pause
Invalid ROM based on Checksum
Power
Red
9 blinks, 1 blink every second
followed by a 2 second pause
System powers on but is unable to boot
Power
Red
10 blinks, 1 blink every second Bad option card
followed by a 2 second pause
none
none
System does not power on and
LEDs are not flashing
Your system ROM includes a Failsafe Boot Block that is protected during the flash process and
allows the computer to be restarted in the unlikely event of an unsuccessful ROM flash.
If the system detects an invalid system ROM during the boot sequence, the Failsafe Boot Block
attempts to locate a valid BIOS image on removable media. To recover from the Boot Block
recovery mode complete the following steps:
Boot Block Recovery
1. Remove any bootable media from the computer and turn off power.
2. Insert a flash drive or CD containing the ROM BIOS.
Password Security
Establishing a Setup password:
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down >
Restart.
2. As soon as the computer is turned on, press F10 when the monitor light turns green to enter
Computer Setup. Press Enter to bypass the title screen, if necessary. If you do not press F10
when prompted, a restart will be necessary.
3. Select Security > Setup Password and follow the instructions on the screen.
System unable to power on
4. Before exiting, click File > Save Changes and Exit.
Establishing a Setup password:
Common POST Error Messages
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down >
Restart.
Screen
Message
Beeps
Probable Cause
Recommended Action
1L, 1S
1. System ROM checksum
error.
1. Verify ROM, reflash if required
3. Select Security > Power-On Password and follow the instructions on the screen.
2. Expansion card.
3. Clean CMOS memory, reboot
Before exiting, click File > Save Changes and Exit.
3. CMOS corruption.
4. Replace system board
2. As soon as the computer is turned on, press F10 when the monitor light turns green to enter
Computer Setup. Press Enter to bypass the title screen, if necessary. If you do not press F10
when prompted, a restart will be necessary.
101-Option
ROM Error
2. Remove suspected card, reboot
4. System board.
Changing a password:
103-System
Board
Failure
none
164Memory Size
Error
and
201
Memory Error
2S
214-DIMM
Configuration
Warning
none
Populated DIMM configura- Rearrange the DIMMs so that
tion is not optimized
each channel has the same amount
of memory.
301-, 304-Keyboard error
none
Keyboard failure.
Check keyboard connection or
keys. Replace keyboard. If 304,
possible system board problem.
501-Display
1L, 2S
Adapter Failure
Graphics controller.
1. Reseat graphics card.
1720-SMART
Hard Drive
Detects Imminent Failure
none
Hard drive is about to fail.
Run drive protection system test if
available. Check for firmware
patch for erroneous error message.
1796-SATA
Cabling Error
none
One or more SATA devices
are improperly attached.
Ensure SATA0 and SATA1 are
used before any other SATA connectors.
1801-Microcode Patch
Error
none
4. Press Enter.
Processor not supported by
ROM BIOS.
1. Upgrade BIOS to proper
version.
Security Features
NOTES: L = long, S = short
1. Turn on or restart the computer. If you are in Windows, click Start> Shut Down > Restart.
To change the Setup password, go to step 2.
To change the Power-on password, go to step 3.
DMA, timers
1. Clear CMOS memory.
2. Remove expansion board.
3. Replace system board.
2. To change the Setup password, as soon as the computer is turned on, press F10 when the
monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if
necessary.
3. When the key icon appears, type your current password, a slash (/) or alternate de-limiter
character, your new password, another slash (/) or alternate delimiter character, and your new
password again as shown:
current password/new password/new password.
NOTE: Type the new password carefully since the actual characters do not appear on the
screen.
4. Press ENTER.
The new password will take effect the next time the computer is restarted.
Deleting a password
Incorrect memory configuration
2. To change the Setup password, as soon as the computer is turned on, press F10 when the
monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if
necessary.
3. When the key icon appears, type your current password followed by a slash (/) or alternate
delimiter character as shown. Example: currentpassword/
NOTE:
For more information about Setup Utilities refer to the Computer Setup Menu on the previous
page or in the Service Reference Guide.
2. Check DIMMs for proper
seating, type, and HP
compatibility.
3. Remove DIMMs singularly and
reboot to isolate faulty DIMM.
2. Check monitor connection.
3. Replace graphics card.
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
To delete the Setup password, go to step 2.
To delete the Power-On password, go to step 3.
1. Run Setup (F10).
2. Change the processor.
Clearing CMOS
1. Shut down the system and disconnect the power cord from the power outlet.
2. Remove the chassis access panel.
Diagnostic Functions
3. Unplug the diskette drive cable from the system board if installed.
Diagnostic functions are provided by the Setup Utility (in system ROM) and by Insight Diagnostics. Insight Diagnostics provides detailed system information including:
4. On the system board, slide the CMOS switch SW50 and hold it for 5 seconds.
5. Replace the diskette drive cable if required.
•
•
•
•
•
Processor type and speed
Memory amount, mapping, and integrity
Hardware peripheral availability/settings
Hard drive type, space used/available
System identification, asset tracking
6. Replace the chassis access panel and reconnect the power cord.
7. Turn on the computer and allow it to start.
Insight Diagnostics may be found on the Documentation and Diagnostics CD that shipped with
the computer. The tool may also be downloaded from the hp Web site using the following procedure:
1. Go to www.hp.com
2. Click the Software and Download driver link.
3. Enter the product number (for example, dc7700) in the text box and press the Enter key.
4. Select the specific product.
5. Select the OS.
6. Click the Diagnostics link.
7. Select HP Insight Diagnostics Offline Edition.
8. Select the proper language and click Download.
NOTE: The download includes instructions on how to create a bootable CD. The SoftPaq
number is SP33665 or later.
dc5750 Illustrated Parts & Service Map, MT Chassis
439134-002
page 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement