Advertisement
Advertisement
NW-A805/A806/A808/
NWZ-A815/A816/A818
SERVICE MANUAL
US Model
NWZ-A815/A816/A818
Canadian Model
AEP Model
UK Model
Australian Model
New Zealand Model
Hong Kong Model
Singapore Model
NW-A805/A806/A808/NWZ-A815/A816/A818
E Model
Chinese Model
Tourist Model
NW-A805/A806/A808 Photo: NW-A808
• SonicStage and the SonicStage logo are trademarks or registered trademarks of Sony
Corporation.
• OpenMG, ATRAC, ATRAC3, ATRAC3plus, ATRAC Advanced Lossless and their logos are trademarks of Sony Corporation.
• “WALKMAN”and “WALKMAN” logo are registered trademarks of Sony Corporation.
is a trademark of Sony Corporation.
• Microsoft, Windows, Windows Vista and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
• Adobe and Adobe Reader are trademarks or registered trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and
Thomson.
• IBM and PC/AT are registered trademarks of International Business Machines Corporation.
• Macintosh is a trademark of Apple Inc.
• QuickTime is a trademark or registered trademark of Apple Inc. in the U.S. and/or other countries.
• Pentium is a trademark or a registered trademark of Intel Corporation.
• This software is based in part on the work of the Independent JPEG Group.
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR
(i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
(“MPEG-4 VIDEO”) AND/OR
(ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM
FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”)
AND/OR
(ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://MPEGLA.COM
• US and foreign patents licensed from Dolby Laboratories.
• All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, TM and ® marks are not specified.
This product is protected by certain intellectual property rights of Microsoft Corporation.
Use or distribution of such technology outside of this product is prohibited without a license from from Microsoft or an authorized Microsoft subsidiary.
Program ©2007 Sony Corporation
Documentation ©2007 Sony Corporation
SPECIFICATIONS
Supported file format
Music (NW-A805/A806/A808)
Codec MP3
WMA * 2
ATRAC
Bit rate: 32 to 320 kbps, variable bit rate-compliant (VBR)
Sampling frequency * 1 : 32, 44.1, 48 kHz
Bit rate: 32 to 192 kbps, variable bit rate-compliant (VBR)
Sampling frequency * 1 : 44.1 kHz
Bit rate: 48 to 352 kbps (66 * 3 , 105 * 3 , 132 kbps for ATRAC3)
Sampling frequency * 1 : 44.1 kHz
Bit rate: 64 to 352 kbps (132 kbps for ATRAC3 base layer)
Sampling frequency * 1 : 44.1 kHz
ATRAC
Advanced
Lossless * 4
AAC * 2 Bit rate: 16 to 320 kbps, variable bit rate-compliant (VBR) * 5
Sampling frequency * 1 : 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz
The number of songsMax. 65,535
Music (NWZ-A815/A816/A818)
File format
File extension
Codec
MP3(MPEG1 Layer3) file format, ASF file format, MP4 file format, Wave-Riff file format
File extension MP3 (.mp3), WMA (.wma), AAC-LC * 1 (.mp4, .m4a, .3gp), Linear PCM
(.wav)
MP3 Bit rate: 32 to 320 kbps (Supports variable bit rate (VBR))
Sampling frequency * 2 : 32, 44.1, 48 kHz
WMA * 2
AAC-LC * 2
Bit rate: 32 to 192 kbps (Supports variable bit rate (VBR))
Sampling frequency * 2 : 44.1 kHz
Bit rate: 16 to 320 kbps (Supports variable bit rate (VBR)) * 3
Sampling frequency * 2 : 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz
Linear PCM Bit rate: 1,411 kbps
Sampling frequency * 2 : 44.1 kHz
File format
File extension
Codec
MP4 file format, “Memory Stick” video format
.mp4, .m4v
MP3 MPEG-4
(NW-A805/A806/A808)
Profile: Simple Profile
Bit rate: Max. 2,500 kbps
Audio
AVC
(H.264/AVC)
Profile: Baseline Profile
Level: 1.2, 1.3
Bit rate: Max. 768 kbps
Frame rate: Max. 30 fps
Resolution: Max. QVGA (320
× 240)
AAC-LC Channel number: Max. 2 channels
Sampling frequency: 24, 32, 44.1, 48 kHz
Bit rate: Max. 288 kbps per 1 channel
File size Max. 2 GB
The number of files Max. 1,000
– Continued on next page –
DIGITAL MEDIA PLAYER
9-887-631-05
2007L05-1
© 2007.12
Sony Corporation
Audio Business Group
Published by Sony Techno Create Corporation
NW-A805/A806/A808/NWZ-A815/A816/A818
Photo* 6
File format Compatible with DCF 2.0/Exif 2.21file format
File extension
Codec
.jpg
JPEG (Baseline)
Number of pixels: Max. 4,000
× 4,000 pixels (16,000,000 pixels)
The number of files Max. 10,000
* 1 Sampling frequency may not correspond to all encoders.
* 2 Copyright protected WMA/AAC/AAC-LC files cannot be played back.
* 3 You cannot record songs on CDs in the ATRAC3 66/105 kbps format using SonicStage.
* 4 The bit rate description of ATRAC Advanced Lossless shows the bit rate for the contents which enables fast transfer to ATRAC compatible devices or media.
* 5 Non-standard bit rates or non-guaranteed bit rates are included depending on the sampling frequency.
* 6 Some video files cannot be played back, depending on their file formats.
Maximum recordable number of songs and time (Approx.)
The approximate times are based on the case in which you transfer or record only 4 minutes songs (not including videos and photos) in the ATRAC * 1 or the MP3 format.
Other playable audio file format song numbers and times may differ from ATRAC or MP3 format.
* 1 Except ATRAC Advanced Lossless. Compression rate of ATRAC Advanced Lossless varies depending on songs.
For example, one CD (containing 15 4-minute songs) is approximately 200 to 500 MB.
Bit rate
48 kbps
64 kbps
128 kbps
256 kbps
320 kbps
NW-A805
Songs
1,300
980
495
250
200
Time
86 hr. 40 min.
65 hr. 20 min.
33 hr. 00 min.
16 hr. 40 min.
13 hr. 20 min.
NW-A806
Songs
2,700
2,000
1,000
515
410
Time
180 hr. 00 min.
133 hr. 20 min.
66 hr. 40 min.
34 hr. 20 min.
27 hr. 20 min.
Bit rate
48 kbps
64 kbps
128 kbps
256 kbps
320 kbps
Bit rate
48 kbps
64 kbps
128 kbps
256 kbps
320 kbps
NW-A808
Songs
5,500
4,100
2,050
1,050
840
NWZ-A815
Songs
1,150
885
440
220
175
Time
366 hr. 40 min.
273 hr. 20 min.
136 hr. 40 min.
70 hr. 00 min.
56 hr. 00 min.
Time
76 hr. 40 min.
59 hr. 00 min.
29 hr. 20 min.
14 hr. 40 min.
11 hr. 40 min.
NWZ-A816
Songs
2,450
1,850
925
460
370
Time
163 hr. 20 min.
123 hr. 20 min.
61 hr. 40 min.
30 hr. 40 min.
24 hr. 40 min.
Bit rate
48 kbps
64 kbps
128 kbps
256 kbps
320 kbps
NWZ-A818
Songs
5,050
3,750
1,850
945
840
Time
336 hr. 40 min.
250 hr. 00 min.
123 hr. 20 min.
63 hr. 00 min.
56 hr. 00 min.
Maximum recordable time of videos (Approx.)
The approximate recordable times is estimated in the case where only videos are transferred. The time may differ, depending on the conditions under which the player is used.
Bit rate
384 kbps
768 kbps
NW-A805
Time
7 hr. 40 min.
4 hr. 20 min.
NW-A806
Time
15 hr. 40 min.
9 hr. 20 min.
NW-A808
Time
32 hr. 40 min.
19 hr. 00 min.
Bit rate
Video Format: 384 kbps
Audio Format: 128 kbps
Video Format: 768 kbps
Audio Format: 128 kbps
NWZ-A815
Time
7 hr. 10 min.
4 hr. 00 min.
NWZ-A816
Time
15 hr. 00 min.
8 hr. 30 min.
NWZ-A818
Time
30 hr. 40 min.
17 hr. 30 min.
Maximum recordable number of photos that can be transferred (Approx.)
Max. 10,000
Recordable number of photos may be less depending on file sizes.
Capacity (User available capacity) * 1
NW-A805: 2 GB (Approx. 1.81 GB = 1,948,622,848 bytes)
NW-A806: 4 GB (Approx. 3.73 GB = 4,008,198,144 bytes)
NW-A808: 8 GB (Approx. 7.56 GB = 8,127,348,736 bytes)
NWZ-A815: 2 GB (Approx. 1.71 GB = 1,840,775,168 bytes)
NWZ-A816: 4 GB (Approx. 3.57 GB = 3,840,638,976 bytes)
NWZ-A818: 8 GB (Approx. 7.30 GB = 7,840,956,416 bytes)
* 1 Available storage capacity of the player may vary.
A portion of the memory is used for data management functions.
Output (headphones)
• Output
5 mW + 5 mW (16 Ω)
• Frequency response
20 to 20,000 Hz (when playing data file, single signal measurement)
2
Interface
Headphone: Stereo mini-jack
WM-PORT (multiple connecting terminal): 22 pins
Hi-Speed USB (USB 2.0 compliant)
Operating temperature
5
°C to 35°C (41°F to 95°F)
Power source
• Built-in rechargeable lithium-ion battery
• USB power (from a computer via the supplied USB cable)
Charging time
USB-based charging
Approx.3 hours (full charge), Approx.1.5 hours (approx. 80%)
Battery life (continuous playback)
The time below is approximated when “New Song Pop Up”, “Clear Stereo”, “DSEE” and and “Dynamic Normalizer” are set to “Off,” “Display Time” is set to other than “Always
On”, and screensaver, “Equalizer” and “VPT” are set to “None.”
Furthermore, for videos, the time is approximated when the brightness of the screen is set to “3.”
The time below may differ depending on ambient temperature or the status of use.
NW-A805/A806/A808
Music
Playback at ATRAC 132 kbps
Playback at ATRAC 128 kbps
Playback at ATRAC 48 kbps
Playback at ATRAC Advanced
Lossless 64 kbps
Playback at MP3 128 kbps
Playback at WMA 128 kbps
Playback at AAC 128 kbps
Video
Playback at MPEG-4 384 kbps
Playback at MPEG-4 768 kbps
Playback at AVC 384 kbps
Playback at AVC 768 kbps
Approximately 30 hours
Approximately 27 hours
Approximately 28 hours
Approximately 27 hours
Approximately 33 hours
Approximately 33 hours
Approximately 32 hours
Approximately 8 hours
Approximately 7 hours
Approximately 6.5 hours
Approximately 6.5 hours
NWZ-A815/A816/A818
Music
Playback at MP3 128 kbps
Playback at WMA 128 kbps
Playback at AAC-LC 128 kbps
Playback at Linear PCM 1,411 kbps
Video
Playback at MPEG-4 768 kbps
Playback at MPEG-4 384 kbps
Playback at AVC 768 kbps
Playback at AVC 384 kbps
Approximately 33 hours
Approximately 33 hours
Approximately 32 hours
Approximately 35 hours
Approximately 7 hours
Approximately 8 hours
Approximately 6.5 hours
Approximately 6.5 hours
Display
2.0-inch, low-temperature poly-silicon TFT color display with white LED-backlight,
QVGA (240
× 320 dots), 0.1275 mm dot pitch, 262,144 colors
Dimensions (w/h/d, projecting parts not included)
43.8
× 88.0 × 9.1 (Thinnest part 8.3) mm (1 3/4 × 3 1/2 × 3/8 (Thinnest part 11/32) inches)
Dimension (w/h/d)
44.5
× 88.0 × 9.6 mm (1 13/16 × 3 1/2 × 13/32 inches)
Mass
Approx. 53 g (Approx. 1.9 oz)
Supplied Accessories
Headphones (1)
Headphone extension cord (1)
Earbuds (Size S, L) (1)
USB cable * 1 (1)
Attachment (1)
Use when connecting the player to the optional cradle, etc.
CD-ROM * 2 (1) (NW-A805/A806/A808)
− SonicStage software
− Image Converter software
* 3
− Operation Guide (PDF file)
CD-ROM * 4 (1) (NWZ-A815/A816/A818)
− MP3 Coversion Tool
− Windows Media Player 11
− Operation Guide (PDF file)
Quick Start Guide (1)
* 1
Do not use any USB cable other than the supplied USB cable or the specified optional dedicated cables.
* 2
* 3
Do not attempt to play this CD-ROM in an audio CD player.
Use this player together with the supplied Image Converter software (version
* 4
3.0 or later). This software is referred as Image Converter in this manual.
Depending on the country/region in which you have purchased the player, the supplied software may be different.
Design and specifications are subject to change without notice.
TABLE OF CONTENTS
1.
SERVICING NOTES
...............................................
3
2.
GENERAL
...................................................................
6
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 1
SERVICING NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size)
3.
DISASSEMBLY
3-1.
Disassembly Flow ...........................................................
7
3-2.
Rear Cabinet Assy ...........................................................
7
3-3.
MAIN Board ....................................................................
8
3-4.
Holder Connector ............................................................
8
3-5.
NAND Board, SVX Switch Flexible (PWB Assy) ..........
9
3-6.
Note When Installing The SVX Switch Flexible
(PWB Assy) .....................................................................
9
3-7.
Front Button .................................................................... 10
3-8.
SVX LCD Assy (LCD801), Battery Assy ....................... 10
3-9.
Front Cabinet Assy .......................................................... 11
4.
TEST MODE
.............................................................. 12
5.
DIAGRAMS
5-1.
Block Diagram ................................................................ 18
5-2.
Printed Wiring Boards – MAIN Section (1/2) – .............. 20
5-3.
Printed Wiring Boards – MAIN Section (2/2) – .............. 21
5-4.
Schematic Diagram – MAIN Section (1/6) – .................. 22
5-5.
Schematic Diagram – MAIN Section (2/6) – .................. 23
5-6.
Schematic Diagram – MAIN Section (3/6) – .................. 24
5-7.
Schematic Diagram – MAIN Section (4/6) – .................. 25
5-8.
Schematic Diagram – MAIN Section (5/6) – .................. 26
5-9.
Schematic Diagram – MAIN Section (6/6) – .................. 27
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 ˚C higher than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.
NOTE THE IC301, IC302, IC501, IC503, IC505, IC506,
IC509, IC601, IC602, IC701, IC802, IC803, IC901 AND
IC903 ON THE MAIN BOARD REPLACING
When IC301, IC302, IC501, IC503, IC505, IC506, IC509, IC601,
IC602, IC701, IC802, IC803, IC901 and IC903 on the MAIN board is damaged, exchange the new MAIN board for the MAIN board which IC damaged.
6.
EXPLODED VIEWS
6-1.
Rear Cabinet Section (NW-A805/A806/A808) ............... 41
6-2.
Rear Cabinet Section (NWZ-A815/A816/A818) ............ 42
6-3.
MAIN Board, NAND Board Section
(NW-A805/A806/A808) .................................................. 43
6-4.
MAIN Board, NAND Board Section
(NWZ-A815/A816/A818) ............................................... 44
6-5.
Front Cabinet Section ...................................................... 45
7.
ELECTRICAL PARTS LIST
................................ 46
NOTE THE CN601 ON THE MAIN BOARD
REPLACING
When CN601 on the MAIN board is damaged, exchange the new
MAIN board for the MAIN board which connector damaged.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C during repairing.
• Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering or unsoldering.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
MinimumSystem Requirements (for the player)
• Computer
IBM PC/AT or compatible computer preinstalled with the following Windows operating systems:
Windows 2000 Professional (Service Pack 4 or later)/Windows XP Home Edition (Service
Pack 2 or later)/Windows XP Professional (Service Pack 2 or later)/Windows XP Media
Center Edition (Service Pack 2 or later)/Windows XP Media Center Edition 2004 (Service
Pack 2 or later)/Windows XP Media Center Edition 2005 (Service Pack 2 or later)/Windows
Vista Home Basic/Windows Vista Home Premium/Windows Vista Business/Windows Vista
Ultimate
Not supported by 64 bit version OS.
Not supported by OSs other than above.
• CPU: Pentium III 733 MHz or higher (For Windows Vista, Pentium III 800 MHz or higher)
• RAM: 128 MB or more (For Windows XP, 256 MB or more; for Windows Vista, 512 MB or more)
• Hard Disk drive: 240 MB or more of available space (1.5 GB or more is recommended)
More space may be required, depending on the version of the operating system.
Additional space is required for storing music, video and photo data.
• Display:
− Screen Resolution: 800 × 600 pixels (or higher) (recommended 1,024 × 768 or higher)
− Colors: High Color (16 bit) (or higher) (SonicStage and Image Converter may not operate properly at color settings at or below 256 colors.)
• CD-ROM drive (supporting Digital Music CD playback capabilities using WDM)
To create original CDs or to back up audio CDs, a CD-R/RW drive is required.
• Sound board
• USB port (Hi-Speed USB is recommended)
• Internet Explorer 6.0 or later and DirectX version 9.0b or later need to be installed.
• Internet connection is required to use the CD Data Base (CDDB) or Electronic Music
Distribution (EMD) or to restore the backup data with SonicStage.
• When converting Windows Media format videos, it is required to have installed the latest
Windows Media Player.
• When converting QuickTime or M4V format videos, it is required to have installed the latest
QuickTime.
We do not guarantee operation for all computers even if they meet the above System
Requirements.
Not supported by the following environments:
− Personally constructed computers or operating systems
− An environment that is an upgrade of the original manufacturer-installed operating system
− Multi-boot environment
− Multi-monitor environment
− Macintosh
3
NW-A805/A806/A808/NWZ-A815/A816/A818
NOTE THE MAIN BOARD REPLACING
When the MAIN board is replaced, format it according to the following.
Formatting Memory (Format)
You can format the built-in flash memory of the player.
If the memory is formatted, all music, video and photo data, etc., will be erased.
Be sure to verify the data stored in memory prior to formatting and export any important data to SonicStage or the hard disk of your computer.
5-way button
Settings
BACK/HOME button
Note
• This function is only available in the pause mode.
1 Press and hold the BACK/HOME button in the pause mode until the
Home menu appears.
2 Press the f/F/g/G button to select
the 7 button to conrm.
(Settings), and then press
3 Press the f/F/g/G button to select “Common Settings,” and then
press the 7 button to conrm.
The list of Common Settings options appears.
4
Press the f/F/g/G button to select “Format,” and then press the
7 button to conrm.
“All data including songs will be deleted. Proceed?” appears.
5 Press the f/F button to select “Yes,” and then press the 7 button to conrm.
“All data will be deleted. Proceed?” appears.
6 Press the f/F button to select “Yes,” and then press the 7 button to conrm.
While the memory is being formatted, an animated display appears.
When initialization finishes, “Memory formatted.” appears.
To cancel the operation
Select “No” in step 5 or 6 and press the 7 button to confirm.
To return to the previous menu
Press the BACK/HOME button.
Note
• Do not format the built-in flash memory using Windows Explorer.
ABOUT THE BLUE COLOR TYPE OF THE NWZ-A816
US MODEL
Blue color type of NWZ-A816 US model is using parts of violet color type.
4
NW-A805/A806/A808/NWZ-A815/A816/A818
COLOR VARIATION
Model
NW-A805
NW-A806
NW-A808
NWZ-A815
NWZ-A816
NWZ-A818
Destination
CND
AEP, UK
FR
EE
E, AUS, JE
MX
CH
CND
AEP, UK
FR
EE
E, AUS, JE
MX
CH
CND
AEP, UK
FR
EE
E, AUS, JE
MX
CH
US
US (CircuitCity)
CND, AEP, UK, NZ, HK, SP, AUS
FR
EE
US
US (BestBuy)
US (CircuitCity)
CND, AEP, UK, NZ, HK, SP, AUS
FR
EE
US
CND, AEP, UK, NZ, HK, SP, AUS
FR
EE
BLACK z z z z
VIOLET z z z z z z z z z
Note: Blue color type of NWZ-A816 US model is using parts of violet color type.
z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z
•
Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
EE : East European model
FR : French model
HK : Hong kong model
JE : Tourist model
MX : Mexican model
NZ : New Zealand model
SP : Singapore model
COLOR
WHITE PINK z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z
SILVER BLUE z z z z z z z (Note)
5
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 2
GENERAL
Parts and Controls
Front
This section is extracted from instruction manual.
Rear
1
5-way button
* 1
Starts playback and enables navigation of the player’s on-screen menus.
2
BACK/HOME button
* 2
Press to go up one list screen level, or to return to the previous menu.
Press and hold the BACK/HOME button to display the Home menu.
3
WM-PORT jack
Use this jack to connect the supplied
USB cable, or optional peripheral devices, such as supported accessories for the WM-PORT.
4
Headphone jack
For connecting the headphones or the headphone extension cord. Insert the jack pin until it clicks into place. If the headphones are connected improperly, the sound from the headphones may not sound right.
Whenusing the headphone extension cord
5
OPTION/PWR OFF button
* 2
Displays the Option menu.
If you press and hold the OPTION/
PWR OFF button, the screen turns off and the player enters the standby mode. If you press any button while the player is in the standby mode, the Now Playing screen appears and the player is ready for operation.
Furthermore, if you leave the player in the standby mode for about a day, the player turns completely off automatically. If you press any button when the player is turned off, the start up screen appears first, then the
Now Playing screen appears.
Note
• The player consumes the battery very slightly even when it is in the standby mode. Therefore, the player might turn completely off in a short time, depending on the power remaining in the battery.
6
VOL+
1
/-- button
Adjusts the volume.
7
RESET button
Resets the player when you press the
RESET button with a small pin, etc.
8
Strap hole
This is used to attach a strap (sold separately).
9
HOLD switch
You can protect the player against accidental operation by using the
HOLD switch when carrying it. By sliding the HOLD switch in the direction of the arrow, all operation buttons are disabled. If you slide the
HOLD switch to the opposite position, the HOLD function is released.
*
1 There are tactile dots. Use them to help with button operations.
*
2 Functions of marked with on the player are activated if you press and hold the corresponding buttons.
Headphones
Headphone extension cord
6
• This set can be disassembled in the order shown below.
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 3
DISASSEMBLY
3-1. DISASSEMBLY FLOW
SET
3-2. REAR CABINET ASSY
(Page 7)
3-3. MAIN BOARD
(Page 8)
3-4. HOLDER CONNECTOR
(Page 8)
3-5. NAND BOARD,
SVX SWITCH FLEXIBLE (PWB ASSY)
(Page 9)
3-6. NOTE WHEN INSTALLING THE SVX SWITCH FLEXIBLE (PWB ASSY)
(Page 9)
3-7. FRONT BUTTON
(Page 10)
3-8. SVX LCD ASSY (LCD801),
BATTERY ASSY
(Page 10)
3-9. FRONT CABINET ASSY
(Page 11)
Note: Follow the disassembly procedure in the numerical order given.
3-2. REAR CABINET ASSY
Note 1: Adhesive (rear) cannot re-used.
Please replace to brand-new part once adhesive (rear) is removed.
Note 2: On installation of hold button, adjust the position of hold switch (S602) hold button.
3 claw
4 two claws
8 rear cabinet assy
(BLACK, SILVER,
VIOLET, BLUE models only)
7 spacer (belt)
3 claw hold button
5
6 adhesive (rear) hold switch (S602)
2 claw hold button
1 two ornament pins hold switch (S602)
6 adhesive (rear)
Note 3: Blue color type of NWZ-A816 US model is using parts of violet color type.
7
NW-A805/A806/A808/NWZ-A815/A816/A818
3-3. MAIN BOARD
1 cushion (connector)
2 sheet (harness)
4 battery assy connector
(CN901)
3 LCD flexible board
(CN801) qa q; spacer (IC) spacer (PWB) qf spacer (SRAM) qs Remove two solders.
qd shield case (main)
9 insulating sheet (main)
6 screw (M1.4) qg MAIN board
8 connector
(CN601) qs Remove two solders.
– rear view –
5 Unsolder three places of the
HP flexible board, and turn it up without applying an excessive force.
7 Turn up the LCD flexible board.
– rear view –
3-4. HOLDER CONNECTOR
5 connector door assy
NOTE WHEN INSTALLING THE SPRING (DOOR)
Note: Hook the spring (door) on the part A of connector door assy and the part B of holder connector as shown in the figure.
holder connector spring (door)
A
B
4 shaft
2
1 Lift up the holder connector.
3
6 spring (door)
4
7 shaft holder connector connector door assy
– side view –
– rear view –
8
NW-A805/A806/A808/NWZ-A815/A816/A818
3-5. NAND BOARD, SVX SWITCH FLEXIBLE (PWB ASSY)
9 sheet (NAND)
3 two screws (M1.4)
(NW-A805/A806/
NWZ-A815/A816 only) q; spacer (NAND) qa NAND board
6 Remove three solders.
5 Lift up the NAND board.
4 Turn up the LCD flexible board.
2 Lift up the
SVX swtch flexible (PWB assy).
7 insulating sheet
8 SVX swtch flexible (PWB assy)
1 two claws
– rear view –
3-6. NOTE WHEN INSTALLING THE SVX SWITCH FLEXIBLE (PWB ASSY)
Note: Follow the assembly procedure in the numerical order given.
Note: Route the lead wires as shown in the figure, and solder them at the angle shown in the figure.
SVX swtch flexible (PWB assy)
Note: The soldering height should be less than 0.8 mm.
lead wire (red) lead wire (gray)
About 45 ° lead wires front cabinet assy
2 Holding the bent part, rotate the SVX swtch flexible (PWB assy) by 3 or 4 turns in the arrow direction, and twist to bind the lead wires.
1 Bend the switch flexible board.
claw
LCD holder claw
About 45 ° lead wire (black)
NAND board
– rear view –
3 Holding the bent part, push in the
SVX swtch flexible (PWB assy) until it gets stuck by two claws of the front cabinet assy.
4 Push the lead wires completely into a space between front cabinet assy and LCD holder.
9
NW-A805/A806/A808/NWZ-A815/A816/A818
3-7. FRONT BUTTON
1 Turn up the LCD flexible board.
2 front button
– rear view –
3-8. SVX LCD ASSY (LCD801), BATTERY ASSY
1 screw (B1.4) q; spacer (rear) qa battery assy
8 SVX LCD assy
(LCD801)
7 claw
7 two claws
4 adhesive (LCD)
Note: Adhesive (LCD) cannot re-used.
Please replace to brand-new part ones adhesive (LCD) is removed.
1 screw (B1.4)
9 cushion (BATT)
3 Turn down the LCD flexible board.
6 adhesive (LCD)
Note: Adhesive (LCD) cannot re-used.
Please replace to brand-new part ones adhesive (LCD) is removed.
5 Open the LCD flexible board.
7 two claws
2
– rear view –
10
NW-A805/A806/A808/NWZ-A815/A816/A818
3-9. FRONT CABINET ASSY
VOL button
Note: The VOL button should be oriented as shown in the figure when it is installed.
1 VOL button
Note: NAND gasket cannot re-used.
Please replace to brand-new part ones NAND gasket is removed.
3 NAND gasket
4 conductive sheet (jack) front cabinet assy rear cabinet assy
5 front cabinet assy front cabinet assy back view
2 gasket (rear)
Note: Gasket (rear) cannot re-used.
Please replace to brand-new part ones gasket (rear) is removed.
– side view –
11
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 4
TEST MODE
Note: Information on the test mode must correspond in enough security. When the leakage has been revealed by any chance, the source of information is specified.
1. SETTING THE TEST MODE
Note: Perform the test mode in the state of 3.6 V or more in the battery voltage.
Setting method:
1. Turn the power on.
2. Press the [BACK] key for 1.5 seconds or more, the home menu is displayed.
3. Slide the [HOLD] key to set the hold on.
4. While pressing the [OPTION] key, press the key as following order.
v
→
B
→
V
→ b
→ v
→ u
→ v
→ b
→
V
→
B
→ v
→ u
5. The set reboots when the [HOLD] key is slided to set the hold off, and the color bar is displayed in the liquid crystal display.
6. Enter the test mode when the [BACK] key is pressed in the state of step 5.
Note: The destination setting and sound pressure regulation setting cannot be executed by this test mode.
4-1-1. Power supply voltage check
This mode is used in case power supply voltage in the state where all power supply lines are starting is checked.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “POWER”, and press the B key to enter the minor item.
3. Press the v / V key to select the “VCHK”.
4. Press the u
key, all power supply lines are started.
liquid crystal display
POWER VCHK
2. RELEASING THE TEST MODE
1. Display the major item selection screen.
2. Press the v / V key to select the “EXITTEST”, and press the
B
key to select the “SURE ?”.
3. Press the u key, turn the power off and release the test mode.
3. CONFIGURATION OF THE TEST MODE
Major item
Major item switching:
[ ] / [ ] key
[ ] key [ ] key
Minor item
Minor item switching:
[ ] / [ ] key
[ ] key
Start
Automatic
[BACK] key
START
In this state, the power supply voltage of each power supply line can be confirmed by measuring the voltage.
5. Press the [BACK] key, return to minor item selection screen.
4-1-2. Consumption current (audio playback) check
This mode is used in case consumption current (audio playback) is checked in the state where “1 kHz 0 dBs L-ch/R-ch VOLUME: 15” audio signal is outputed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “POWER”, and press the B key to enter the minor item.
3. Press the v
/
V
key to select the “ACHK”.
4. Press the u key, “1 kHz 0 dBs L-ch/R-ch VOLUE: 15” audio signal is outputed.
liquid crystal display
Finish or
Result
POWER ACHK
1kHz 0dBs L/Rch
HPOUT [ VOL: 15 ]
4. OPERATION OF THE TEST MODE
4-1. Power liquid crystal display
MPTAPP MENU
POWER VCHK
AUDIO ACHK
VIDEO DSVCHK
OTHER CHGCHK
SHUTDOWN BATTCHK
EXITTEST
START
5. In this state, each time the [OPTION] key is pressed, LCD back light on/off switch is performed.
6. Press the [BACK] key, return to minor item selection screen.
12
NW-A805/A806/A808/NWZ-A815/A816/A818
4-1-3. Standby current check
This mode is used in case standby current is checked.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “POWER”, and press the B key to enter the minor item.
3. Press the v / V key to select the “DSVCHK”.
4. Press the u key, enter the state of the deep sleep.
5. Press the [BACK] key, release the state of the deep sleep.
liquid crystal display
4-1-5. Battery voltage check
This mode is used in case battery voltage is checked.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “POWER”, and press the B key to enter the minor item.
3. Press the v / V key to select the “BATTCHK”.
4. Press the u key, the battery voltage is displayed.
When the battery voltage cannot be confirmed, “ERROR” is displayed.
liquid crystal display
POWER DSVCHK
POWER BATTCHK
X.XXXV
OK
6. Press the [BACK] key, return to minor item selection screen.
4-1-4. Charge current check
This mode is used in case charge current is checked.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “POWER”, and press the B key to enter the minor item.
3. Press the v / V key to select the “CHGCHK”.
4. Press the u
key, the charge setting is displayed.
liquid crystal display
POWER CHGCHK
AC
X.XXXV: Battery voltage
6. Press the [BACK] key, return to minor item selection screen.
4-2. Audio
While playing the audio track, it's in a repeat state. If [BACK] key is pressed, it’s stopped.
Press the [VOL +] key to switch the HP/LINE.
liquid crystal display
MPTAPP MENU
POWER
AUDIO OUTPUT
VIDEO SN
OTHER F1
SHUTDOWN F2
EXITTEST SEPLR
SEPRL
MAXOUT
NMLZR
SPCHK
AC
5. In this state, each time the [OPTION] key is pressed, the port setting for the charge is changed as shown in the table below.
Port control
Display CHG_XCHGEN CHG_PEN CHG_PEN2
AC L H H
USB500
USB100
L
L
H
H
H
L
6. Press the [BACK] key, return to minor item selection screen.
13
NW-A805/A806/A808/NWZ-A815/A816/A818
4-2-1. Output check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v / V key to select the “OUTPUT”.
4. Press the u key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
liquid crystal display
4-2-3. Frequency characteristic 1 check
“20 Hz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v / V key to select the “F1”.
4. Press the u
key, “20 Hz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
liquid crystal display
AUDIO OUTPUT
1kHz 0dBs L/Rch
HPOUT [ VOL: 25 ]
AUDIO F1
20Hz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-2. S/N check
“Infinity Zero VOLUME: 30” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v / V key to select the “SN”.
4. Press the u
key, “Infinity Zero VOLUME: 30” audio signal is outputted.
liquid crystal display
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-4. Frequency characteristic 2 check
“20 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v
/
V
key to select the “F2”.
4. Press the u key, “20 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
liquid crystal display
AUDIO SN
Infinity Zero
HPOUT [ VOL: 30 ]
AUDIO F2
20kHz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
START
5. Press the [BACK] key, return to minor item selection screen.
14
NW-A805/A806/A808/NWZ-A815/A816/A818
4-2-5. CH separation (L-ch) check
“1 kHz 0 dBs L-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v / V key to select the “SEPLR”.
4. Press the u key, “1 kHz 0 dBs L-ch VOLUME: 25” audio signal is outputted.
liquid crystal display
4-2-7. Maximum output check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” (Headphone output when
AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 13”) audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v
/
V
key to select the “MAXOUT”.
4. Press the u key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”
(Headphone output when AVLS operates: “1 kHz 0 dBs L-ch/
R-ch VOLUME: 13”) audio signal is outputted.
liquid crystal display
AUDIO SEPLR
1kHz 0dBs Lch
HPOUT [ VOL: 25 ]
AUDIO MAXOUT
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
AVLS OFF
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-6. CH separation (R-ch) check
“1 kHz 0 dBs R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v / V key to select the “SEPRL”.
4. Press the u
key, “1 kHz 0 dBs R-ch VOLUME: 25” audio signal is outputted.
liquid crystal display
AUDIO SEPRL
1kHz 0dBs Rch
HPOUT [ VOL: 25 ]
START
5. In this state, each time the [OPTION] key is pressed, AVLS on/ off switch is performed.
6. Press the [BACK] key, return to minor item selection screen.
4-2-8. Normalizer check
“1 kHz –24 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v
/
V
key to select the “NMLZR”.
4. Press the u key, “1 kHz –24 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
liquid crystal display
AUDIO NMLZR
1kHz –24dBs L/Rch
HPOUT [ VOL: 30 ]
START
5. Press the [BACK] key, return to minor item selection screen.
START
5. Press the [BACK] key, return to minor item selection screen.
15
NW-A805/A806/A808/NWZ-A815/A816/A818
4-2-9. Sound pressure regulation level check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “AUDIO”, and press the B key to enter the minor item.
3. Press the v / V key to select the “SPCHK”.
4. Press the u
key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
liquid crystal display
4-4. Other liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
OTHER CLOCK
SHUTDOWN KEY
EXITTEST FORMAT
DEST
SPSET
FWVER
NCAPCHK
AUDIO SPCHK
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
4-4-1. Clock check
The movement of an internal clock is confirmed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “OTHER”, and press the B key to enter the minor item.
3. Press the v
/
V
key to select the “CLOCK”.
4. Press the u key, date and time are displayed.
liquid crystal display
START
5. Press the [BACK] key, return to minor item selection screen.
4-3. Video liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO LCD
OTHER
SHUTDOWN
EXITTEST
OTHER CLOCK
XX, XX XX XXXX
##:##:##.######
START
XX, XX XX XXXX : Date
##:##:##.###### : Time
“START” changes into “OK” if the movement of an internal clock is confirmed.
5. Press the [BACK] key, return to minor item selection screen.
4-3-1. LCD display check
Liquid crystal display is checked.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “VIDEO”, and press the B key to select the “LCD”.
3. Press the u key, all black is displayed on the liquid crystal display.
4. In this state, each time the [OPTION] key is pressed, the screen display changes in the following order.
All black (default)
→ All red → All green → All blue → All white
→ Color bar → Maximum drawing size confirmation
Maximum drawing size confirmation:
All blue (All sides are red) is displayed. Whether red in all sides is seen is confirmed.
4. In this state, each time the [VOL ---] key is pressed, LCD back light brightness min/max/middle switch is performed.
5. Press the [BACK] key, return to minor item selection screen.
16
NW-A805/A806/A808/NWZ-A815/A816/A818
4-4-2. Key check
The operation of the key is confirmed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “OTHER”, and press the B key to enter the minor item.
3. Press the v
/
V
key to select the “KEY”.
4. Press the u key, all keys are displayed.
liquid crystal display
4-4-6. Firmware version check
The firmware version is displayed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “OTHER”, and press the B key to enter the minor item.
3. Press the v / V key to select the “FWVER”.
4. Press the u key, the firmware version is displayed.
liquid crystal display
4-4-8. NAND capacity check
(since firmware version 1.00.20)
Capacity of NAND flash memory, present bud block, maximum bud block, and vender ID are displayed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “OTHER”, and press the B key to enter the minor item.
3. Press the v / V key to select the “NCAPCHK”.
4. Press the u key, capacity of NAND flash memory, present bud block, maximum bud block, and vender ID are displayed.
liquid crystal display
OTHER KEY
UP VOL+
REW PLAY FF VOL–
DOWN OPTION
HOLD BACK
OTHER FWVER
X.XX.XX
OTHER NCAPCHK
X @@@@ #### $$$$
START
5. The character corresponding to the key is selected every time the key is pressed. “START” changes into “OK” if all keys are pressed.
6. Slide the [HOLD] key from ON to OFF, return to minor item selection screen.
4-4-3. Format
The user’s area is formatted, and ICV for the video and ICV for audio are initialized.
Note: Not used for the servicing.
Format the set from “Settings”
→ “Common settings” →
“Format” when it home menu in usually operates when the set should format it.
4-4-4. Destination setting
The destination setting, language information, and sound pressure regulation information are written in the NAND flash memory.
Note: Not used for the servicing.
4-4-5. Sound pressure regulation setting
ON/OFF of sound pressure regulation is confirmed.
Note: Not used for the servicing.
X.XX.XX
: Firmware version
5. Press the [BACK] key, return to minor item selection screen.
4-4-7. NAND capacity check
(firmware version 1.00.19 former)
Capacity of NAND flash memory is displayed.
Checking method:
1. Enter the test mode.
2. Press the v
/
V
key to select the “OTHER”, and press the
B key to enter the minor item.
3. Press the v / V key to select the “NCAPCHK”.
4. Press the u key, capacity of NAND flash memory is displayed.
liquid crystal display
OTHER NCAPCHK
X GB
X : Capacity of NAND flash memory
2/4/8 (2 GB/4 GB/ 8 GB)
@@@@ : Number of present bud block
####
(It makes an error the acquisition of the number of bud blocks at “–1”)
: Number of maximum bud block
$$$$
(It makes an error the acquisition of the vender ID at “–1”)
: Vender ID of NAND flash memory
0x98/0xec (TOSHIBA/SAMSUNG)
(It makes an error the acquisition of the vender ID at “–1”)
5. Press the [BACK] key, return to minor item selection screen.
4-5. Shutdown
Function that power supply of set can be turned off without ending static test mode.
Procedure:
1. Enter the test mode.
2. Press the v / V key to select the “SHUTDOWN”, and press the B key to select the “SURE ?”.
3. Press the u key, turn the power off while having entered the test mode.
X GB : Capacity of NAND flash memory
2 GB/4 GB/8 GB
5. Press the [BACK] key, return to minor item selection screen.
NW-A805/A806/A808/NWZ-A815/A816/A818
17 17
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 5
DIAGRAMS
5-1. BLOCK DIAGRAM
USB
CONTROLLER
IC501 CN851 (1/2)
(WM-PORT)
D+ 3
D– 4
USB DATA0 – USB DATA15
X501
12MHz
USB ADDRESS1 – USB ADDRESS8
IC508
IC507
X603
11.2896MHz
X602
32.768kHz
256Mbit SD-RAM
IC701
SDR_D0O – SDR_D31
SDR_A00 – SDR_A12
SYSTEM CONTROLLER, POWER CONTROL,
LCD DRIVER, NAND FLASH INTERFACE,
MS INTERFACE, SD-RAM INTERFACE
IC601
LCD_G0 – LCD_G5
LCD_B0 – LCD_B5
LCD_R0 – LCD_R5
VCC_DCIN
VCC_VBUS
VCC_VBAT
• SIGNAL PATH
: AUDIO
NAND
BOARD
NAND_D0O – NAND_D07
WAKE UP
SWITCH
Q603
S601
RESET
S602
(HOLD)
OFF
ON
VDD_UNREG
VDD_DDCOUT20
SYS +3.1V
USB +1.8V
USB +3.1V
HP/LINE +1.8V
A/D CONVERTER,
D/A CONVERTER
IC302
LCD_R0 – LCD_R5
LCD_G0 – LCD_G5
LCD_B0 – LCD_B5
VDD_ANA
VDD_ECO
VDD_DDCIO
VDD_GP1
VDD_GP3
VDD_GP4
VDD_HP
VDD_LO
VDD_LOG
VDD_PLL
LIQUID
CRYSTAL
DISPLAY
LCD801
HEADPHONE/LINE
SELECTOR
IC303
5 7
MUTING
CONTROL
Q301, 304
VDD_UNREG
MUTING
Q302
CHARGE
CONTROL
Q903
NW-A805/A806/A808/NWZ-A815/A816/A818
18 18
MUTING
Q303
J301
(HEADPHONE)
VCC_VBUS
LITHIUM ION
STRAGE
BATTERY
3.7V 610mAh
CN851 (2/2)
(WM-PORT)
14
17
AU_L_OUT
AU_R_OUT
13
16
AU_L_IN
AU_R_IN
20
11
12
DCIN
USB_DET
UNREG_OUT
10
8
TXD/SLEEP
RXD/WAKE
9 CRD_AD
•
Note for Printed Wiring Boards and Schematic Diagrams
Note on Printed Wiring Board:
• Y
: parts extracted from the conductor side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side: Parts on the pattern face side seen from
(Side B) the pattern face are indicated.
Parts face side:
(Side A)
Parts on the parts face side seen from the parts face are indicated.
•
MAIN board is multi-layer printed board.
However, the patterns of intermediate-layers have not been included in diagrams.
Note on Schematic Diagram:
•
All capacitors are in
µ
F unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics and tantalums.
•
All resistors are in
Ω
and 1 /
4 specified.
W or less unless otherwise
• C : panel designation.
• A
: B+ Line.
•
Power voltage is dc 3.7 V and fed with regulated dc power supply from CN901 pin 1 and pin 2 on the MAIN board.
•
Voltages are dc with respect to ground under no-signal conditions.
no mark : PLAY BACK
• Voltages are taken with a VOM (Input impedance 10 M Ω ).
Voltage variations may be noted due to normal production tolerances.
•
Signal path.
F : AUDIO
L : VIDEO
•
Abbreviation
FR : French model
NW-A805/A806/A808/NWZ-A815/A816/A818
NW-A805/A806/A808/NWZ-A815/A816/A818
19 19
NW-A805/A806/A808/NWZ-A815/A816/A818
•
Semiconductor
Location
Ref. No. Location
IC501
IC502
IC503
IC504
IC505
IC506
IC507
IC508
IC509
IC601
IC701
IC903
D-2
D-3
C-1
C-2
D-3
D-3
D-2
D-4
D-4
C-3
C-4
B-6
Q603 D-5
NW-A805/A806/A808/NWZ-A815/A816/A818
5-2. PRINTED WIRING BOARDS – MAIN Section (1/2) –
1 2 3
: Uses unleaded solder.
4
A
5
B
C
D
E
MAIN BOARD
(SIDE A)
R635
C695
C613 C697 C650 C660
C615 C698 C651 C661
C643
C672 C675
C671 C674 C677
C680 C684 C687
C640
C655 C701 C713
C629
C654 C702 C714
C703 C704
CL908
CL620
C609
C688
C683 C682
X603
C501
C626
X602
C669
R627
R634
6
C612
4
R814
C511 R521
IC503
R507
C503
1
C512
3
R522
C507
C508
R502
AF26 AF25 AF24 AF23 AF22 AF21 AF20 AF19 AF18 AF17 AF16 AF15 AF14 AF13 AF12 AF11 AF10 AF9
AE26 AE25T AE24 AE23 AE22 AE21 AE20 AE19 AE18 AE17 AE16 AE15 AE14 AE13 AE12 AE11 AE10 AE9
U19 U18 U17 U16 U15 U14 U13 U12 U11 U10 U9
K19 K18 K17 K16 K15 K14 K13 K12 K11 K10
H19 H18 H17 H16 H15 H14 H13 H12 H11 H10 H9
E23 E22 E21 E20 E19 E18 E17 E16 E15 E14 E13 E12 E11 E10 E9 E8 E7 E6
D26 D25 D24 D23 D22 D21 D20 D19 D18 D17 D16 D15 D14 D13 D12 D11 D10 D9
C26 C25 C24 C23 C22 C21 C20 C19 C18 C17 C16 C15 C14 C13 C12 C11 C10 C9
B26 B25 B24 B23 B22 B21 B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 B9
A26 A25 A24 A23 A22 A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9
C509
C657
CL634
C686
4
5
IC507
R516
3
C510
1
IC501
CL633
C505
R506
R505
4 5
IC502
IC506
VDR851
VDR852 2 4
1 3
LF851
C513
IC505
R514
1
4
R520
3
5
IC508
C516
R510
IC509
R857
C853
C518
R603 R649 R648
C633 C634
R618
C645
D
C689
R646
S
G
CL909
CL637 X501
1 22
CL910
C502
23
CN851
(WM-PORT)
24
CL907
1-871-811-
11
(11)
L901
CL621
L801
S601
RESET
Note: When CN601, IC501, IC503, IC505, IC506, IC509, IC601,
IC701 and IC903 cannot exchange with single. When
CN601, IC501, IC503, IC505, IC506, IC509, IC601, IC701 and IC903 are damaged, exchange the entire mounted board.
20 20
6
NAND
BOARD
NW-A805/A806/A808/NWZ-A815/A816/A818
5-3. PRINTED WIRING BOARDS – MAIN Section (2/2) –
A
B
C
D
E
1 2
: Uses unleaded solder.
3 4 5 6
•
Semiconductor
Location
Ref. No. Location
D101
D201
D-3
D-3
IC301
IC302
IC303
IC602
IC802
IC803
IC901
Q301
Q302
Q303
Q304
Q903
D-6
D-5
C-4
C-2
C-2
C-5
E-4
C-3
D-3
C-3
C-3
D-4
CL906
R639
MAIN BOARD
(SIDE B)
CL628 CL624 CL635
CL805 CL802 CL804
TH901
CL627
CL625 CL629 CL622
R910 R905
CL803 CL801
R641
CL636
R804
R645
J301
(HEADPHONE)
R914
R812
R913
CL626
R701
R813
C802 R636
R816
R660 C664
FB819
R637
R626
CL604
C810
R808
R809
C811
G
R
L
R807
C812
IC802
CL614
HP
FLEXIBLE
BOARD
R602
IC602
CL613
R
G
L
C913
CL631
CL610
B
E
(FR)
C209
A
C641
C707 C706
C708
C
C705
B
E
C319
D201
CL202
CL301
CL102
C
C644
C807
R313
2E
2B
1C
C109
R109
C652
C649
2C
1B
1E
R206
R106
C681
K10 J10 H10 G10 F10 E10 D10 C10 B10
R105
C107
2C 1B 1E
A
R908 R921
Q302
C318
2E 2B 1C
C210
(FR)
R111
C108
R911
R923
S
D
G
R107
CL903
D101
R907
C906
A
C110
A
R110
FB101
Q903
R919
R903
C908
C910
C312
C313
CL904
C920
C311
R205
C207
R306
C315
C314
C106
C206
R102
R202
1
C662
FB813
C306
R310
CN901
R625
FB801
C102
C202
2
CL603
FB804
FB803
FB802
FB811
FB810
FB809
FB807
FB818
FB817
CL623
C204
R314
R315
R630
R312
C302
C104
C205
C105
C301
C307
R302
S602
HOLD
ON
OFF
C305
CL901 CL902
C904
R912
CL905
R651
11
1-871-811-
(11)
CL201 CL101
1 2
LITHIUM ION
STRAGE BATTERY
3.7V 610mAh
LCD801
LIQUID
CRYSTAL
DISPLAY
Note: When IC301, IC302, IC602, IC802, IC803 and IC901 cannot exchange with single. When IC301, IC302, IC602, IC802,
IC803 and IC901 are damaged, exchange the entire mounted board.
NW-A805/A806/A808/NWZ-A815/A816/A818
21 21
NW-A805/A806/A808/NWZ-A815/A816/A818
5-4. SCHEMATIC DIAGRAM – MAIN Section (1/6) –
•
See page 28 for IC Block Diagrams.
•
See page 30 for IC Pin Function Description.
1 2 3 4 5 6 7 8 9 10
A
VDD_HP
CRD_LINEOUT
HP_XMUTE
MAIN BOARD (1/6)
R302
0
B
R306
0
R104 22k
R102 22k
R202
22k
Q304
UNR31A600LS0
C
R304
150k
R305
220k
C305
10
IC301
+1.8V REGULATOR
C104
150p
C204
C103
150p
0.001
C203 0.001
C202
1
C102
1
24 23 22 21 20 19 18 17
C106
C206
C105
C205
R204
22k
0.001
0.001
0.001
0.001
Q301
UNR31A600LS0
R307
1k
R313
1k
D
E
ADA_XRST
PCM0_ADDT
CPU_REFCLKO
PCM0_BCK
PCM0_DADT
PCM0_LRCK
SPI0_MOSI
SPI0_CLK
SPI0_XCS2
R314 0 R315 220
R312
0
C313 0.1
C314 1
C315 1
C310 0.1
C312
22
C311
1
C319
4.7
C321
0.022
(FR)
R111
470
R106
470
1 2 3 4 5 6 7 8
F
C308
1
C207
0.068
R205
47
C108
100p
C109
0.0047
11
Q301,304
MUTING CONTROL
C318
0.1
12 13
R108
470
R208
470
R109
470
-1 -2
Q302
EMX18 Q302,303
MUTING
IC303
HEADPHONE/LINE SELECTOR
IC303
MAX4764ETB+TG069
11
-1 -2
Q303
EMX18
R209
470
(FR)
R211
470
R206
470
14
C208
0.0047
C209
100p
∗
R107,207
5.6(EXCEPT FR)
47(FR)
R310
0
G
AGND
DGND
C307
10
C306
0.1
FB301
VDR301
15 16
FB101
FB201
CL101
CL201
CL102
CL202
CL301
LINE_IN_L
LINE_IN_R
G
L
R
LINE_OUT_L
LINE_OUT_R
J301
(HEADPHONE)
L
R
G
HP FLEXIBLE
BOARD
Note: When IC301 and IC302 cannot exchange with single. When
IC301 and IC302 are damaged, exchange the entire mounted board.
NW-A805/A806/A808/NWZ-A815/A816/A818
22 22
NW-A805/A806/A808/NWZ-A815/A816/A818
5-5. SCHEMATIC DIAGRAM – MAIN Section (2/6) –
•
See page 28 for IC Block Diagrams.
1 2 3 4 5 6 7
A
MAIN BOARD
(2/6)
VDD_GP1
USB_INT
AB0_XDRQ
B
I
C
D
E
F
G
AB0_D8
AB0_D9
AB0_D10
AB0_D11
AB0_D12
AB0_D13
AB0_D14
AB0_D15
AB0_XWR
AB0_D0
AB0_D1
AB0_D2
AB0_D3
AB0_D4
AB0_D5
AB0_D6
AB0_D7
RESETZ
FLASHCLK
USB_XRST
USB_PWRCTL
AB0_XRD
AB0_XCS2
AB0_XACK
AB0_A1
AB0_A2
AB0_A3
AB0_A4
AB0_A5
AB0_A6
AB0_A7
AB0_A8
H
J
DGND
8 9 10 11 12 13 14 15
AB0_XRD
AB0_XCS2
AB0_XACK
AB0_A1
AB0_A2
AB0_A3
AB0_A4
AB0_A5
AB0_A6
AB0_A7
AB0_A8
AB0_D8
AB0_D9
AB0_D10
AB0_D11
AB0_D12
AB0_D13
AB0_D14
AB0_D15
AB0_D0
AB0_D1
AB0_D2
AB0_D3
AB0_D4
AB0_D5
AB0_D6
AB0_D7
R517
0
IC506
D FLIP-FLOP
9
IC505
D FLIP-FLOP
9
R514
10
C514
0.1
C513
0.1
R513
100k
C515
0.1
C510
0.1
AB0_D7
AB0_D8
AB0_D9
AB0_D10
AB0_D11
AB0_D12
AB0_D1
AB0_D2
AB0_D3
AB0_D4
AB0_D5
AB0_D6
AB0_D13
AB0_D14
AB0_D15
IC507
INVERTER
IC507
TC7SG04AFS
R516
10
R519
100k
IC502
RESET SWITCH
IC502
TC7SG08AFS
A1
R521
0
IC504
+1.8V REGULATOR
C504
0.1
R510
22
H4 F2 F1 G1 D3 E2 C5 E1 C4 D2 F4 G4 E3 H2 F3
R520
100k
C516
0.1
IC508
TC7SG04AFS
IC508
INVERTER
C517 0.1
R509
0
IC509
LEVEL SHIFT
C518
0.1
AB0_XRD
R502
0
X501
12MHz
R506
6200
R505
100k
R504
100k
R503
100k
C501
18p
C502
15p
C503
1
R507
1K
A5 B3 C2 A2 A7 C7 G2 D7 B2 B4 B5 B6 B7 G7 A1
C511
1
K
16 17
VCC_VBUS
USB_DM
USB_DP
Note: When IC501, IC503, IC505, IC506 and IC509 cannot exchange with single. When IC501, IC503, IC505, IC506 and IC509 are damaged, exchange the entire mounted board.
NW-A805/A806/A808/NWZ-A815/A816/A818
23 23
NW-A805/A806/A808/NWZ-A815/A816/A818
5-6. SCHEMATIC DIAGRAM – MAIN Section (3/6) –
• See page 28 for IC Block Diagrams.
• See page 30 for IC Pin Function Description.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
B
VDD_GP1
CHG_PEN2
CHG_XCHGEN
USB_SUSPEND
CHG_ICTL
CHG_XFLT
XCHG_DET
XUSB_OK
VCC_VBAT
VDD_UNREG
MAIN BOARD (3/6)
VDD_GP1
VDD_DDCOUT20
VCC_VBAT
VDD_UNREG
C
CHG_PEN2
CHG_XCHGEN
USB_SUSPEND
CHG_ICTL
CHG_XFLT
XCHG_DET
XUSB_OK
L601
10 µH
R616
0.22
C641
22
C640
1
R617
0.22
C644
22
C643
1
R618
0
R622
C652 0.1
0
C653
0.001
C646
0.1
C647
0.001
C648
0.1
C649
0.001
R624
0
CL613
R623
0
C654 0.1
C669
5p
C655
0.001
C657
C656
0.1
0.001
C665
C667
C664
0.1
0.001
C666
0.1
0.001
CL614
C668
5p
R628
470k
R629
470k
R626
100k
R625
100k
R633
0
C629
1
R652 100k
D
E
F
G
H
I
J
K
L
M
N o
VDD_ECO
SDR_D31
SDR_D30
SDR_D29
SDR_D28
SDR_D27
SDR_D26
SDR_D25
SDR_D24
SDR_D23
SDR_D22
SDR_D21
SDR_D20
SDR_D19
SDR_D18
SDR_D17
SDR_D16
SDR_D15
SDR_D14
SDR_D13
SDR_D12
SDR_D11
SDR_D10
SDR_D09
SDR_D08
SDR_D07
SDR_D06
SDR_D05
SDR_D04
SDR_D03
SDR_D02
SDR_D01
SDR_D00
SDR_CLK
SDR_DQM3
SDR_DQM2
SDR_DQM1
SDR_DQM0
SDR_XWR
SDR_CKE0
SDR_XCS0
SDR_XRAS
SDR_XCAS
SDR_A12
SDR_A11
SDR_A10
SDR_A09
SDR_A08
SDR_A07
SDR_A06
SDR_A05
SDR_A04
SDR_A03
SDR_A02
SDR_A01
SDR_A00
SDR_BA1
SDR_BA0 p
SDR_D19
SDR_D18
SDR_D17
SDR_D16
SDR_D15
SDR_D14
SDR_D13
SDR_D12
SDR_D11
SDR_D10
SDR_D09
SDR_D08
SDR_D07
SDR_D06
SDR_D05
SDR_D04
SDR_D03
SDR_D02
SDR_D01
SDR_D00
VDD_ECO
SDR_D31
SDR_D30
SDR_D29
SDR_D28
SDR_D27
SDR_D26
SDR_D25
SDR_D24
SDR_D23
SDR_D22
SDR_D21
SDR_D20
SDR_CLK
SDR_DQM3
SDR_DQM2
SDR_DQM1
SDR_DQM0
SDR_XWR
SDR_CKE0
SDR_XCS0
SDR_XRAS
SDR_XCAS
SDR_A12
SDR_A11
SDR_A10
SDR_A09
SDR_A08
SDR_A07
SDR_A06
SDR_A05
SDR_A04
SDR_A03
SDR_A02
SDR_A01
SDR_A00
SDR_BA1
SDR_BA0
VDD_UNREG
VDD_ECO
VCC_DCIN
VCC_VBAT
VCC_VBUS
VDD_ANA
VDD_DDCOUT20
VDD_GP1
VDD_GP3
VDD_GP4
VDD_HP
VDD_L0
VDD_LOG
VDD_PLL
C604
1
C614
1
S601
RESET
C616
0.1
R603
10k
C611
0.001
C625
8p
32.768kHz
C626
8p
KEY_WAKE
XHOLD_KEY
WAKEUP_INT
CRD_LINEOUT
HP_XMUTE
CHG_ICTL
LCD_PCI
LCD_PON
R615 1k
USB_INT
XCHG_DET
CHG_XFLT
CRD_DET
XUSB_OK
R604
0
C634
C633
0.1
0.1
R605
0
R607
470k
X602
R611
0
R608 1K
C632
1
C631
0.01
R601 100k
C619
C623
C628
C638
1
R655
100k
R656
100k
R657
100k
R658
100k
R602
470p
470p
470p
0
AF7
AF4
AD5
AA2
Y3
W2
AD3
AC5
AB4
AB2
F1
W1
E10
E12
D16
B15
B13
D15
C17
A17
AB25
AD25
AA26
V26
AF20
AF22
AF23
AE24
Y26
AC24
U23
N26
V24
G5
AB26
AC13
AD13
E1
F4
G3
G2
E2
T23
D9
E16
B18
A14
A10
A6
A11
A13
A16
A8
A1
A24
A26
AD1
AE1
AE25
AF1
AF24
AF26
B1
B25
C1
L11
AE3
AE4
AD4
AA1
Y2
W3
AD2
AC4
AB3
AA3
G1
Y1
E13
C16
C15
E11
E15
B17
D17
AF21
AD21
R24
AA25
V25
AE20
AE21
AE22
AE23
W26
T25
M26
U25
G4
AD17
AC26
AD16
F2
P24
D1
F3
H1
R26
B10
E17
C18
A18
A15
A9
B12
A12
B16
A7
B11
A2
A25
A3
AE2
AE26
AF2
AF25
AF3
B2
B26
C26
VCC_VBAT
B2
A1
C622
1
AB0_D6 AB0_D7
C660
0.001
SYSTEM CONTROLLER,POWER CONTROL,
LCD DRIVER NAND FLASH INTERFACE,
C651
0.1
15
R648
4700
KEY_AD0
KEY_AD1
NAND_D00
NAND_D01
NAND_D02
NAND_D03
NAND_D04
NAND_D05
NAND_D06
NAND_D07
NAND_RXB2
NAND_RXB3
R649
4700
CL621
CN601
30P
23
25
27
29
15
17
19
21
11
13
7
9
1
3
5
KEY_AD0
KEY_AD1
DGND
VDD_GP3
NC
NAND_D00
NAND_D01
NAND_D02
NAND_D03
NAND_D04
NAND_D05
NAND_D06
NAND_D07
NAND_RXB2
NAND_RXB3
16
NC
T8
E6
E4
C4
E9
B3
M9
E5
C5
V3
V1
J2
T1
T4
U4
V8
V5
W5
U1
U3
A4
K8
H8
J9
E8
U8
AB5
U5
V4
W4
Y4
U2
Y5
P10
U14
V16
AC23
AD20
AB21
AD22
AC21
E3
J8
D2
E7
K9
L9
D4
H12
J10
H9
B4
C3
C2
D3
U11
V11
AC18
AB15
AC16
AC17
T22
P22
N25
P23
N23
M25
M23
K23
L24
L22
M19
AD9
AC25
W25
F5
D5
B5
A5
V2
P26
J3
J1
C19
AE19
AC3
AC1
AD19
AD24
U13
CL620
CL634
CL637
CL623
CL624
CL625
CL626
CL627
CL628
CL629
R641
1k
C677 0.001
R635
0
R642
100k
R640
47k CL622
C662
0.001
C689
0.047
SDR_CKE0
SDR_XCAS
SDR_BA1
SDR_BA0
SDR_A09
SDR_A08
SDR_A07
SDR_A06
SDR_A05
SDR_A04
SDR_A03
SDR_A02
SDR_A12
SDR_A11
SDR_A10
SDR_A01
SDR_A00
RESETZ
LCD_PWM1
ADA_XRST
USB_PWRCTL
PCM0_DADT
PCM0_ADDT
PCM0_LRCK
PCM0_BCK
NAND_XWR
NAND_XRD
NAND_RXB3
NAND_RXB2
NAND_RXB1
NAND_RXB0
NAND_D07
NAND_D06
NAND_D05
NAND_D04
NAND_D03
NAND_D02
NAND_D01
NAND_D00
NAND_CLE
NAND_XCS3
NAND_XCS2
NAND_XCS1
NAND_XCS0
NAND_ALE
VDD_GP1
R644
0
LCD_VSYNC
LCD_R5
LCD_R4
LCD_R3
LCD_R2
LCD_R1
LCD_R0
LCD_PXCLK
LCD_HSYNC
LCD_G5
LCD_G4
LCD_G3
LCD_G2
LCD_G1
LCD_G0
LCD_B5
LCD_B4
LCD_B3
LCD_B2
LCD_B1
LCD_B0
VDD_GP1
R643
0
R651
470k
Q603
3LP01S-K-TL-E
WAKE UP SWITCH
S
S602
HOLD
OFF t ON
R646
470k
R647
470k
WAKEUP_INT
VDD_ECO
R645
0
VDD_PLL
VDD_ANA
XHOLD_KEY
KEY_WAKE
VDD_GP1
USB_PWRCTL
USB_XRST
RESETZ
AB0_XACK
FLASHCLK
AB0_XCS2
AB0_XRD
AB0_XWR
AB0_D0
AB0_D1
AB0_D2
AB0_D3
AB0_D4
AB0_D5
AB0_D6
AB0_D7
AB0_D8
AB0_D9
AB0_A1
AB0_A2
AB0_A3
AB0_A4
AB0_A5
AB0_A6
AB0_A7
AB0_A8
AB0_D10
AB0_D11
AB0_D12
AB0_D13
AB0_D14
AB0_D15
AB0_XDRQ
USB_INT
LCD_G3
LCD_G2
LCD_G1
LCD_G0
LCD_B5
LCD_B4
LCD_B3
LCD_B2
LCD_B1
LCD_B0
LCD_PXCLK
LCD_HSYNC
LCD_VSYNC
LCD_PCI
LCD_PON
LCD_BLTCTL
VDD_LOG
VDD_DDCIO
VDD_GP4
LCD_PWM1
LCD_R5
LCD_R4
LCD_R3
LCD_R2
LCD_R1
LCD_R0
LCD_G5
LCD_G4
VDD_HP
PCM0_LRCK
PCM0_BCK
PCM0_ADDT
SPI0_MOSI
SPI0_CLK
SPI0_XCS2
CPU_REFCLKO
HP_XMUTE
ADA_XRST
CRD_LINEOUT
PCM0_DADT
VDD_ANA
CRD_DET
CRD_AD
UART_RXD
UART_TXD
VCC_DCIN
VCC_VBUS
KEY_GND
KEY_WAKE
DGND
VDD_GP3
NAND_CLE
NAND_ALE
NAND_XRD
NAND_XWR
NC
NAND_XCS0
NAND_XCS1
NAND_XCS2
NAND_XCS3
NAND_RXB0
NAND_RXB1
24
26
28
30
16
18
20
22
8
10
12
14
2
4
6
17 18
R650
1k
19 20
NAND_CLE
NAND_ALE
NAND_XRD
NAND_XWR
NAND_XCS0
NAND_XCS1
NAND_XCS2
NAND_XCS3
NAND_RXB0
NAND_RXB1
21
NW-A805/A806/A808/NWZ-A815/A816/A818
24 24
22
NAND BOARD
Note: When CN601, IC601 and IC602 cannot exchange with single. When CN601, IC601 and
IC602 are damaged, exchange the entire mounted board.
LCD_G3
LCD_G2
LCD_G1
LCD_G0
LCD_B5
LCD_B4
LCD_B3
LCD_B2
LCD_B1
LCD_B0
LCD_PXCLK
LCD_HSYNC
LCD_VSYNC
LCD_PCI
LCD_PON
LCD_BLTCTL
VDD_LOG
VDD_DDCIO
VDD_GP4
LCD_PWM1
LCD_R5
LCD_R4
LCD_R3
LCD_R2
LCD_R1
LCD_R0
LCD_G5
LCD_G4
VDD_HP
PCM0_LRCK
PCM0_BCK
PCM0_ADDT
SPI0_MOSI
SPI0_CLK
SPI0_XCS2
CPU_REFCLKO
HP_XMUTE
ADA_XRST
CRD_LINEOUT
PCM0_DADT
VDD_ANA
CRD_DET
CRD_AD
UART_RXD
UART_TXD
VCC_DCIN
VCC_VBUS
VDD_GP1
USB_PWRCTL
USB_XRST
RESETZ
AB0_XACK
FLASHCLK
AB0_A8
AB0_D0
AB0_D1
AB0_D2
AB0_D3
AB0_D4
AB0_D5
AB0_D6
AB0_XCS2
AB0_XRD
AB0_XWR
AB0_A1
AB0_A2
AB0_A3
AB0_A4
AB0_A5
AB0_A6
AB0_A7
AB0_D7
AB0_D8
AB0_D9
AB0_D10
AB0_D11
AB0_D12
AB0_D13
AB0_D14
AB0_D15
AB0_XDRQ
USB_INT
AGND
DGND
5-7. SCHEMATIC DIAGRAM – MAIN Section (4/6) –
1 2 3 4 5 6 7
A
VDD_ECO
I
B
C
D
E
F
G
H
SDR_A12
SDR_A11
SDR_A10
SDR_A09
SDR_A08
SDR_A07
SDR_A06
SDR_A05
SDR_A04
SDR_A03
SDR_A02
SDR_A01
SDR_A00
SDR_CLK
SDR_DQM0
SDR_DQM1
SDR_DQM2
SDR_DQM3
SDR_XWR
SDR_CKE0
SDR_XCS0
SDR_XRAS
SDR_XCAS
SDR_BA1
SDR_BA0
SDR_D31
SDR_D30
SDR_D29
SDR_D28
SDR_D27
SDR_D26
SDR_D25
SDR_D24
SDR_D23
SDR_D22
SDR_D21
SDR_D20
SDR_D19
SDR_D18
SDR_D17
SDR_D16
SDR_D15
SDR_D14
SDR_D13
SDR_D12
SDR_D11
SDR_D10
SDR_D09
SDR_D08
SDR_D07
SDR_D06
SDR_D05
SDR_D04
SDR_D03
SDR_D02
SDR_D01
SDR_D00
MAIN BOARD
(4/6)
SDR_A12
SDR_A11
SDR_A10
SDR_A09
SDR_A08
SDR_A07
SDR_A06
SDR_A05
SDR_A04
SDR_A03
SDR_A02
SDR_A01
SDR_A00
SDR_DQM0
SDR_DQM1
SDR_DQM2
SDR_DQM3
SDR_XWR
SDR_CKE0
SDR_XCS0
SDR_XRAS
SDR_XCAS
SDR_BA1
SDR_BA0
SDR_CLK
SDR_D31
SDR_D30
SDR_D29
SDR_D28
SDR_D27
SDR_D26
SDR_D25
SDR_D24
SDR_D23
SDR_D22
SDR_D21
SDR_D20
SDR_D19
SDR_D18
SDR_D17
SDR_D16
SDR_D15
SDR_D14
SDR_D13
SDR_D12
SDR_D11
SDR_D10
SDR_D09
SDR_D08
SDR_D07
SDR_D06
SDR_D05
SDR_D04
SDR_D03
SDR_D02
SDR_D01
SDR_D00
C703
0.1
C704 100p
C705 0.1
C706 100p
C707
0.1
C708 100p
C709
0.1
C710 100p
R701
0
C702
100p
R702
100k
B2 R7 L7 F9 A7 K3 K2 H9 H7 H3 E7 E3 J1 J2 K7 J9 K8 J8 F2 F8 K1 K9
G8 G9 F7 F3 G1 G2 G3 H1 H2 J3 G7 J7 H8 R8 N7 R9 N8 P9 M8 M7 L8 L2
8 9
NW-A805/A806/A808/NWZ-A815/A816/A818
10 11 12
SDR_D31
SDR_D30
SDR_D29
SDR_D28
SDR_D27
SDR_D26
SDR_D25
SDR_D24
SDR_D23
SDR_D22
SDR_D21
SDR_D20
SDR_D19
SDR_D18
SDR_D17
SDR_D16
SDR_D15
SDR_D14
SDR_D13
SDR_D12
SDR_D11
SDR_D10
SDR_D09
C853
100p
R857
470k
R858
10k
LF851
R853 1k
R861 0
R851
1k
CN851
22P
(WM-PORT)
1
2
3
GND
RESERVE(OTG)
D+
4
5
D-
GND
6 RESERVE
7 VIN
8 RXD/WAKE
9 CRD_AD
10 TXD/SLEEP
11 USB_DET
12
13
14
15
16
UNREG_OUT
AU_L_IN
AU_L_OUT
AU_COM
AU_R_IN
AU_R_OUT 17
18 VIDEO-GND/GND
19 VIDEO-IN/OUT/OPEN
20
21
DCIN
DIGITAL_OUT/OPEN
22 GND
R855
47k
R859 1k
DGND
VCC_DCIN
AGND
VCC_VBAT
VCC_VBUS
LINE_OUT_R
LINE_IN_R
LINE_OUT_L
LINE_IN_L
VCC_DCIN
VCC_VBUS
UART_TXD
UART_RXD
CRD_DET
CRD_AD
VDD_ANA
USB_DM
USB_DP
Note: When IC701 cannot exchange with single. When IC701 is damaged, exchange the entire mounted board.
NW-A805/A806/A808/NWZ-A815/A816/A818
25 25
NW-A805/A806/A808/NWZ-A815/A816/A818
5-8. SCHEMATIC DIAGRAM – MAIN Section (5/6) –
•
See page 28 for IC Block Diagrams.
•
See page 30 for IC Pin Function Description.
1 2 3 4 5 6 7 8
MAIN BOARD (5/6)
A
R811
470k
B
C
D
E
LCD_PXCLK
LCD_VSYNC
LCD_HSYNC
LCD_R5
LCD_R4
LCD_R3
LCD_R2
LCD_R1
LCD_R0
LCD_G5
LCD_G4
LCD_G3
LCD_G2
LCD_G1
LCD_G0
LCD_B5
LCD_B4
LCD_B3
LCD_B2
LCD_B1
LCD_B0
LCD_PON
LCD_PCI
VDD_DDCIO
VDD_LOG
VDD_GP4
LCD_PWM1
LCD_BLTCTL
LCD_PXCLK
LCD_VSYNC
LCD_HSYNC
LCD_R5
LCD_R4
LCD_R3
LCD_R2
LCD_R1
LCD_R0
LCD_G5
LCD_G4
LCD_G3
LCD_G2
LCD_G1
LCD_G0
LCD_B5
LCD_B4
LCD_B3
LCD_B2
LCD_B1
LCD_B0
LCD_PON
LCD_PCI
LCD_R2
LCD_B0
LCD_R3
LCD_R0
LCD_PXCLK
LCD_B4
LCD_B2
LCD_B1
LCD_R1
LCD_G5
LCD_G4
LCD_G3
LCD_G2
LCD_G1
G1 F10 F3 E10 F1 E8 E3 E1 D10 D8 D1 C10 C8 C5
FB811
FB806
FB816
FB805
FB817
FB818
FB807
FB809
FB812
FB801
FB802
FB803
FB804
G4
G0
G2
G5
R0
R1
R2
R3
R5
B3
R4
B4
B5
K6 K7 K8 G8 H6 C6 D3 C7 F8 H4 J10 A6 K9 K10
F
R807
47k
L801
22 µH
R805
10k
R806
10k
9
G
R803 0
R816 0
R804 0
R801 0
H
A3 B1
R802
0
I
VDD_UNREG
DGND
NW-A805/A806/A808/NWZ-A815/A816/A818
26 26
C808
0.1
R808
33k
10
G4
G5
R0
B5
G0
G1
G2
G3
B0
B1
B2
B3
B4
R1
R2
R3
R4
R5
LCD_PCI
LCD_PON
PXCLK
VSYNC
HSYNC
C811
C812
0.1
0.1
R813 100k
R814
100k
C813 0.1
CN801
33P
R5
PCI
RST
VDD1
VDD1
PVDD1
MCK
VSYNC
HSYNC
GND
R2
R3
R4
G3
G4
G5
R0
R1
G0
G1
G2
B1
B2
B3
B4
B5
GND
GND
LED_-
LED_-
LED_+
LED_+
B0
30
29
28
27
26
25
24
23
33
32
31
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
R812
0
R809
22
C810
1
11 12 13
LCD801
LIQUID
CRYSTAL
DISPLAY
Note: When IC802 and IC803 cannot exchange with single. When IC802 and IC803 are damaged, exchange the entire mounted board.
NW-A805/A806/A808/NWZ-A815/A816/A818
5-9. SCHEMATIC DIAGRAM – MAIN Section (6/6) –
•
See page 28 for IC Block Diagrams.
1 2 3 4 5
MAIN BOARD (6/6)
A
B
C
D
VDD_UNREG
VDD_DDCOUT20
VDD_GP1
XUSB_OK
XCHG_DET
CHG_XFLT
CHG_ICTL
CHG_XCHGEN
CHG_PEN2
USB_SUSPEND
VCC_VBAT
XUSB_OK
XCHG_DET
CHG_XFLT
CHG_ICTL
CHG_XCHGEN
CHG_PEN2
USB_SUSPEND
BATT+
BATT-
1
2
CN901
2P
CL901
CL902
R907
470k
C917
22
C915
22
6 7
R923
470k
C907 22
R911
470k
C911
0.001
C903
0.1
C909
22
C908
0.1
8 9 10
R902
0
IC903
DC/DC CONVERTER
11
C912
22
C920
4.7
C910
0.1
L901
4.7
µH
C921
22
C913
22
R901
0
R913
10k
R914
47k
R915
33k
11
VDD_UNREG
DGND
VDD_DDCOUT20
DGND
AGND
DGND
VDD_UNREG
25 24 23 22 21 20 19
E
LITHIUM ION
STRAGE BATTERY
3.7V 610mAh
F
G
VCC_VBAT
VCC_DCIN
CL904
CL905
CL906
CL907
CL908
CL909
CL910
CHG_ICTL
C901
10
C902 0.1
CHG_XCHGEN
CHG_PEN2
R903
470k
R921
220k
R908 10k
R904 470k
Q903
2SK3541T2L
CHARGE CONTROL
2.9
CL903
2.9
2.9
2.7
2.7
0
0
R919
10k
S
R906
3300
7 8 9 10 11 12
R905
1500
TH901
0
0
3.7
3.7
0
R912
8200
R910
33k
R922
220k
USB_SUSPEND
DGND
VCC_VBUS
AGND
Note: When IC901 and IC903 cannot exchange with single. When IC901 and IC903 are damaged, exchange the entire mounted board.
NW-A805/A806/A808/NWZ-A815/A816/A818
27 27
NW-A805/A806/A808/NWZ-A815/A816/A818
•
IC Block Diagrams
– MAIN Board –
IC301 XC6401FF58DR
EN2 1
ON / OFF
CONTROL
VIN 2
REGULATOR 2 6 VOUT2
VOLTAGE
REFERENCE
EN1 3
ON / OFF
CONTROL
7
REGULATOR 1 5 VOUT1
4 VSS
IC303 MAX4764ETB+TG069
VCC 1
NO1 2
COM1 3
NC1 4
IN1 5
10 NO2
9 COM2
8 NC2
7 IN2
6 GND
11
IC501 S1R72V17B00A20B
A1 G7 B7 B6 B5 B4 B2 D7 G2 C7 A7 A2 C2 B3 A5
XI
XO
B8
C8
OSCILLATOR
TESTEN
ATPGEN
BURNIN
H1
H8
A8
TEST
MUX
R1
DP
DM
VBUSFLG
VBUSEN
VBUS
A6
A3
A4
B1
C1
C3
XRESET
CLKIN
D1
D8
XRD
XWRL
G3
H3
DEVICE SERIAL
INTERFACE
ENGINE
MULTI
TRANSCELVER
MACRO
HOST SERIAL
INTERFACE
ENGINE
F3 H2 E3 G4 F4 D2
USB
FIRST-IN FIRST-OUT
USB
FIRST-IN FIRST-OUT
CONTROLLER
CHANNEL
/ENDPOINT
C4
CPU INTERFACE
CONTROLLER
DMA
CONTROLLER
E1 C5 E2 D3 G1 F1 F2 H4
C6
E8
D6
CD15
CD14
F8
E7
F7
CD13
CD12
CD11
CD10
G8 CD9
H7 CD8
F6
G6
H6
E6
F5
H5
G5
CD7
CD6
CD5
CD4
CD3
CD2
CD1
IC503, 602 TK63731AB1G0B
GND A1
A2
THERMAL &
OVER CURRENT
PROTECTION
ON / OFF
CONTROL
VOLTAGE
REFERENCE
REGULATOR
B2 VIN
B1
NW-A805/A806/A808/NWZ-A815/A816/A818
IC504 TK63718HCL-G
VIN 1
THERMAL &
OVER CURRENT
PROTECTION
GND 2 REGULATOR
VOLTAGE
REFERENCE
ON / OFF
CONTROL
6 VCONT
5 GND
4 NC
VOUT 3
IC505, 506 TC7WG74FC
8 VCC
7 XPR
CK 1
D
XQ
2
3
GND 4
S
C
Q
XQ
D
R 6 XCLR
5 Q
9
IC509 SN74AVC1T45YZPR
VCCA A1
GND B1
A C1
A2 VCCB
B2 DIR
C2 B
28
IC802 BD6069GUT-E2
C3 C2
DRIVER
GNDA A1
EN A2
OSCILLATOR
CURRENT
SENSE
+
CONTROL
OVER VOLTAGE
PROTECT
SHORT
PROTECT
THERMAL
SHUTDOWN
PWM
COMPARATOR
ERROR AMP
A3 B1
C1 VOUT
B3 VFB
28
NW-A805/A806/A808/NWZ-A815/A816/A818
IC901 MAX8677AETG
25 24 23 22
/DONE
DC
DC
1
2
3
21 20
CURRENT-LIMITED
VOLTAGE REGULATOR
INPUT
VOLTAGE
MONITOR
SYSTEM
LOAD SWITCH
LITHIUM BATTERY
CHARGER
19
18 BAT
17 BAT
16 USB
15 USB
14 TSET
/CEN 4
PEN1
PEN2
5
6
CURRENT
SETTING
7 8 9
INPUT LIMITER &
CHARGER THERMAL
REGULATION
10 11 12
13 USUSS
IC903 MAX1557ETB
IN 1
GND 2
SS
OUT
XSHDN
3
4
5
BIAS
REFERENCE
1.25V
CURRENT
SENSE
0.675V
CURRENT-LIMIT
COMPARATOR
SLOPE
COMPARATOR
PWM
COMPARATOR
PWM
AUTO SKIP
CONTROL
OUTPUT
VOLTAGE
SELECTOR
SHORT-CIRCUIT
PROTECTION
DRIVER
ERROR
AMPLIFIER
CLOCK
1MHZ
SKIP-OVER
ENTER SKIP/
SR OFF
ZERO-CROSS
DETECT
11
10 D1
9
8
7
6
INP
LX
PGND
D2
29
NW-A805/A806/A808/NWZ-A815/A816/A818
27
28
29
24
25
26
19
20
21
22
23
30
31
32
33
•
IC Pin Function Description
MAIN BOARD IC302 CS42L51-CNZR (A/D CONVERTER, D/A CONVERTER)
Pin No.
1
2
3
4
12
13
14
9
10
11
15
16
17
5
6
7
8
18
Pin Name
LRCK
SDA/CDIN
SCL/CCLK
AD0/nCS
VA_HP
FLYP
GND_HP
FLYN
VSS_HP
AOUTB
AOUTA
VA
AGND
DAC_FILT+
VQ
ADC_FILT+
MICIN1/AIN3A
MICIN2/AIN3B/
BIAS
AIN2A
AIN2B/BIAS
AFILTA
AFILTB
AIN1A
AIN1B nRESET
VL
VD
DGND
SDOUT
MCLK
SCLK
SDIN
AGND
I/O
I/O
I/O
I2C mode : Serial date input/output with the system controller
SPI mode : Serial date input from the system controller
I Serial data transfer clock signal input from the system controller
I
I2C mode : Address signal input from the system controller
SPI mode : Chip select signal input from the system controller
Power supply terminal (+1.8V)
I Connected to the external charge pump capacitor (positive node)
Ground terminal
I Connected to the external charge pump capacitor (negative node)
Connected to the capacitor for the internal analog headphone section
O R-ch analog audio signal output to the headphone and WM-port
O L-ch analog audio signal output to the headphone and WM-port
Power supply terminal (+1.8V)
Ground terminal
Not used
Not used
Not used
I Analog audio signal input terminal Not used
I
I
I
-
I
I
-
-
-
O
I
Analog audio signal input terminal Not used
Analog audio signal input terminal Not used
Not used
Not used
I L-ch analog audio signal input from the WM-port
R-ch analog audio signal input from the WM-port
Reset signal input from the system controller
Power supply terminal
Power supply terminal (+1.8V)
Ground terminal
Serial audio date output to the system controller
Master clock signal input from the system controller
O Serial clock signal output to the system controller
I Serial audio date input from the system controller
Ground terminal
Description
L/R sampling clock signal input/output with the system controller
Analog audio signal input terminal Not used
30
NW-A805/A806/A808/NWZ-A815/A816/A818
MAIN BOARD IC601 MC-10051F1-FAE-A (SYSTEM CONTROLLER, POWER CONTROL, LCD DRIVER,
NAND FLASH INTERFACE, MS INTERFACE, SD-RAM INTERFACE)
Pin No.
A1 to A3
A4
A5
A6 to A10
A11 to
A13
A14 to
A16
A17
A18
A19
A20
A21
Pin Name
NC
NAND_WEZ
IO_B
NC
GND
NC
VCCVBUS
NC
IO_A
VDD_L0
AB0_A8
C10
C11
C12
C13
C7
C8
C9
C4
C5
C6
A22 to
A26, B1,
B2
NC
B3
B4
B5
NAND_CEZ2
NAND_DA0
IO_B
B6
B7, B8 ADIN6, ADIN8
B9 ADVCC
B10
B11, B12
B13
KEY_AD1
CPEN
GND
SWGND
NC B14
B15
B16
SWADP2
GND
VCCADP B17
B18
B19
B20
NC
IO_A
VDD_L0
B21 to
B26, C1
NC
C2, C3
NAND_CEZ1,
NAND_CEZ3
NAND_DA1
IO_B
KEY_AD0
ADIN5
CRD_AD
ADGND
NC
GND
NC
GND
I/O
Not used
Description
O Write enable signal output to the NAND flash memory
Not used
Not used
-
-
-
-
Not used
Power supply terminal
O
-
O Chip enable signal output to the NAND flash memory
I/O Serial date input/output with the NAND flash memory
Not used
I Key input terminal (A/D input)
Not used
Power supply terminal
Not used
Ground terminal
Ground terminal
Not used
Not used
Ground terminal
Power supply terminal
Not used
Not used
Power supply terminal
-
O
I/O
I
-
-
Ground terminal
Not used
Power supply terminal (USB power supply)
Not used
Address signal output to the USB controller
Not used
Not used
Chip enable signal output to the NAND flash memory
Serial date input/output with the NAND flash memory
Not used
Key input terminal (A/D input)
Not used
I Terminal for peropherals distinction of WM-port
Ground terminal
Not used
Ground terminal
Not used
Ground terminal
31
NW-A805/A806/A808/NWZ-A815/A816/A818
Pin No.
C14
C15
C16
C17
C18
C19
C20
C21 to C24
C25
C26
D1
D2
D3
D4
D5
Pin Name
NC
SWADP
CAPVBDL
VCCVBAT
NC
IO_A
AB0_A5
NC
AB0_D1
NC
IDPULLUP
NAND_RBZ0
NAND_ALE
NAND_DA2
IO_B
VDD_L1
GND
NC
GND
I/O
Not used
Not used
Not used
Description
Power supply terminal (battery power supply)
Not used
Not used
O Address signal output to the USB controller
Not used
I/O Serial date input/output with the USB controller
Not used
Not used
O Read/busy signal output to the NAND flash memory
O Address latch enable signal output to the NAND flash memory
I/O Serial date input/output with the NAND flash memory
Not used
Power supply terminal
Ground terminal
Not used
Ground terminal
D6, D7
D8
D9
D10
D11 to
D14
D15
NC Not used
D16
D17
D18
D19
D20
SWVBUS2
CAPVBSW
VCCVBAT
AB0_A3
IO_A
AB0_A6
Not used
Not used
Power supply terminal (battery power supply)
O Address signal output to the USB controller
Not used
O Address signal output to the USB controller
D21 to
D23
NC Not used
D24, D25 AB0_D0, AB0_D2 I/O Serial date input/output with the USB controller
D26
E1
E2
E3
NC
DISCHGVBUS
NC
NAND_REZ
Not used
Not used
Not used
E4
E5
NAND_DA3
IO_B
O Read enable signal output to the NAND flash memory
I/O Serial date input/output with the NAND flash memory
Not used
E6
E7
E8
NAND_DA5
NC
NAND_DA7
I/O
-
I/O
Serial date input/output with the NAND flash memory
Not used
Serial date input/output with the NAND flash memory
E9
E10
E11
NAND_CLE
BATSEL
SWBAT
CAPBTDL E12
E13
E14
E15
E16, E17
E18
CAPADDL
NC
SWVBUS
NC
AB0_A4
O Command latch enable signal output to the NAND flash memory
Not used
Not used
Not used
Not used
Not used
Not used
Not used
O Address signal output to the USB controller
32
NW-A805/A806/A808/NWZ-A815/A816/A818
Pin No.
E19
E20
E21 to E23
E24
E25
E26
Pin Name
FLASHCLK
AB0_A7
NC
AB0_XDRQ
AB0_D4
NC
DGND
I/O
O Flash clock output to the D flip-flop
Description
O Address signal output to the USB controller
I
Not used
DMA request signal input from the USB controller
I/O Serial date input/output with the USB controller
Not used
Ground terminal F1
F2
F3, F4
CHGVBUS
NC
IO_B
AB0_CSZ2
AB0_XACK
Not used
Not used
Not used F5
F22
F23
F24, F25 AB0_D3, AB0_D5 I/O Serial date input/output with the USB controller
F26
G1
NC
DVDD
Not used
Power supply terminal
G2, G3
G4
G5
G22
NC
EXTRST
NC
ETHER_XINT
O Chip select signal output to the USB controller
O DMA acknowledge signal output to the USB controller
I
Not used
-
Reset signal input from the reset switch
Not used
Not used
G23 to
G25
G26
H1
H2
AB0_D15 to
AB0_D13
NC
USBSUSPD
NC
I/O
-
-
-
Serial date input/output with the USB controller
Not used
Not used
Not used
H3 to H5
SDR_DATA25,
SDR_DATA27,
SDR_DATA31
I/O Serial data input/output with the 256Mbit SD-RAM
H8
H9 to H15
H16
NAND_RBZ1
NC
AB0_WRZ
O
-
O
Read/busy signal outoput to the NAND flash memory
Not used
Write strobe signal output to the USB controller
H17 NC Not used
H18, H19 AB0_A1, AB0_A2 O Address signal output to the USB controller
H22 to
H25
H26
J1 to J3
J4, J5
AB0_D8, AB0_D9,
AB0_D7, AB0_D6
NC
IO_A
SDR_DATA29,
SDR_DATA30
I/O
-
-
I/O
Serial date input/output with the USB controller
Not used
Not used
Serial data input/output with the 256Mbit SD-RAM
J8
J9, J10
J11 to J17
J18
J19
J22 to
J24
J25
J26
K1 to K3
NAND_RBZ2
NC
GND
NC
AB0_RDZ
AB0_D10 to
AB0_D12
CHGGND1
NC
VDD_L1
O
-
-
-
O
I/O
-
-
-
Read/busy signal outoput to the NAND flash memory
Not used
Ground terminal
Not used
Read strobe signal output to the USB controller
Serial date input/output with the USB controller
Ground terminal
Not used
Power supply terminal
33
NW-A805/A806/A808/NWZ-A815/A816/A818
Pin No.
K4, K5
K8
K9
K10 to
K18
K19
K22
K23
K24
K25
K26
Pin Name
SDR_DATA28,
SDR_DATA26
NAND_RBZ3
NAND_DA6
GND
NC
LCD_HSYNC
NC
LCD_VSYNC
CHGGND2
NC
L1 to L5,
L8
SDR_DATA23 to
SDR_DATA20,
SDR_DATA24,
SDR_DATA19
L9
L10
L11
L17, L18
NAND_DA4
GND
NC
GND
L19, L22 to L25
L26
LCD_B1 to
LCD_B5
M9
NC
M1 to M5,
M8
SDR_DATA18 to
SDR_DATA13
NAND_CEZ0
M10,
M17, M18
M19
M22 to
M25
M26
N1 to
N5, N8
GND
LCD_B0
LCD_G0 to
LCD_G3
NC
SDR_DATA12 to
SDR_DATA7
I/O
I/O
O
I/O
-
-
-
-
I/O
I/O
-
-
-
O
-
I/O
O
-
O
O
-
I/O
Serial data input/output with the 256Mbit SD-RAM
Read/busy signal outoput to the NAND flash memory
Serial date input/output with the NAND flash memory
Ground terminal
Not used
O Horizontal sync signal output to the level shift
Not used
O Vertical sync signal output to the level shift
Ground terminal
Not used
Serial data input/output with the 256Mbit SD-RAM
Serial date input/output with the NAND flash memory
Ground terminal
Not used
Ground terminal
Video signal (B) output to the level shift
Not used
Serial data input/output with the 256Mbit SD-RAM
Chip enable signal output to the NAND flash memory
Ground terminal
Video signal (B) output to the level shift
Video signal (G) output to the level shift
Not used
Description
Serial data input/output with the 256Mbit SD-RAM
N9, N10,
N17 to
N19
GND Ground terminal
N22, N23 LCD_G4, LCD_G5 O Video signal (G) output to the level shift
N24, N25 LCD_R0, LCD_R1 O Video signal (R) output to the level shift
N26 VMICIN I Power supply voltage input terminal
P1 to P4
SDR_DATA5 to
SDR_DATA2
I/O Serial data input/output with the 256Mbit SD-RAM
P5
P8
P9
P10
SDR_DQM0
SDR_DATA6
GND
RESETZ
O Write mask signal output to the 256Mbit SD-RAM
I/O Serial data input/output with the 256Mbit SD-RAM
Ground terminal
O Reset signal output to the USB controller
P17 to P19
P22
GND
LCD_R3
Ground terminal
O Video signal (R) output to the level shift
34
NW-A805/A806/A808/NWZ-A815/A816/A818
Pin No.
P23
P24
P25, P26
R1
R2 to R4
U10 to
U12
U13
U14
U15
U16
U17
U18
U19
U22
U23
Pin Name
LCD_PXCLK
NC
IO_A
SDR_DATA0
SDR_DQM3 to
SDR_DQM1
WAKEUP
NC
L1_DET
ERR_RST_REQZ
NC
REFCLKO
NC
C_TDO
VLOGIN
I/O
O Clock signal output to the level shift
Not used
O
-
-
-
-
O
-
Wake up signal output terminal
Not used
Not used
Not used
Not used
Master clock signal output to the D/A converter
Not used
O Data output terminal for JTAG Not used
I Power supply voltage input terminal
Description
Not used
I/O Serial data input/output with the 256Mbit SD-RAM
R5
R8
R9
SDR_WEZ
SDR_DATA1
GND
O Write enable signal output to the 256Mbit SD-RAM
I/O Serial data input/output with the 256Mbit SD-RAM
Ground terminal
Not used R10
R17
R18
NC
U70_CTSZ
U70_RTSZ
Not used
Not used
Ground terminal R19 GND
R22, R23 LCD_R2, LCD_R4 O Video signal (R) output to the level shift
R24 GNDSINK Ground terminal
R25
R26
T1
VDD_L0
NC
SDR_CKE0
Power supply terminal
Not used
O Clock enable signal output to the 256Mbit SD-RAM
NC Not used T2
T3
T4
SDR_CSZ0
SDR_BA1
SDR_RASZ
O
O
Chip select signal output to the 256Mbit SD-RAM
Bank address signal output to the 256Mbit SD-RAM
T5
T8
T9
NC
GND
NC
O Row address strobe signal output to the 256Mbit SD-RAM
Not used
Ground terminal
Not used T10
T17
T18
T19
T22
T23
T24
T25
T26
U70_SOUT
U70_SRIN
GND
LCD_R5
NC
C_TMS
VLOG
CKO
O
I
-
O Video signal (R) output to the level shift
Not used
I MS signal input terminal for JTAG Not used
O
O
Serial data output to the WM-port
Serial data input from the WM-port
Ground terminal
Power supply output terminal
Main system clock output terminal (11.2896MHz)
U1 to U5
SDR_A12 to
SDR_A8
O Address signal output to the 256Mbit SD-RAM
U8
U9
SDR_CASZ
GND
O
-
Column address strobe signal output to the 256Mbit SD-RAM
Ground terminal
NC
O
-
Write mask signal output to the 256Mbit SD-RAM
Not used
35
NW-A805/A806/A808/NWZ-A815/A816/A818
Pin No.
U24
U25
U26
V1 to V3
Pin Name
C_TCK
VPLL
CKI
IO_A
I/O Description
I Clock signal input terminal for JTAG Not used
O Power supply voltage output terminal
I Main system clock input terminal (11.2896MHz)
Not used
V4, V5,
V8
V9
V10
V11
SDR_A6, SDR_A5,
SDR_A7
O Address signal output to the 256Mbit SD-RAM
GND Ground terminal
CHG_XCHGEN O Charge enable signal output to the charge control
NC Not used
V12 to
V15
GND Ground terminal
V16
V17
DSP_DET
LCD_BLTCTL
NC
C_RTCK
C_TRSTZ
Not used
O Control signal output to the LCD back light driver
Not used V18, V19
V22
V23
I Clock signal input terminal for JTAG Not used
I Reset signal input terminal for JTAG Not used
V24
V25
V26
W1
W2
W3
VPLLIN
VDSPIN
VDSP
IOGND
LCD_PCI
LCD_PON
I
I Power supply voltage input terminal
-
-
O
Power supply voltage input terminal
Not used
Ground terminal
PCI signal output to the liquid crystal display
O PON signal output to the liquid crystal display
W4, W5 SDR_A4, SDR_A3 O Address signal output to the 256Mbit SD-RAM
W8
W9
W10
CHG_PEN2
GND
NC
O
-
Charge enable signal output to the charge control
Ground terminal
Not used
W11 to
W18
W19
GND Ground terminal
W22
W23
W24, W25
WR_ERR
NC
C_TDI
IO_B
-
-
Not used
Not used
I Data input terminal for JTAG Not used
Not used
O Power supply voltage output terminal W26
Y1
Y2
VLO
IOVDD
CHG_ICTL
Power supply terminal
O Charge on/off control signal output to the charge control
O Analog muting on/off control signal output terminal Y3 HP_XMUTE
Y4, Y5 SDR_A2, SDR_A1 O Address signal output to the 256Mbit SD-RAM
Y22, Y23 TM1, TM0 Not used
Y24, Y25 VDD_DSP Power supply terminal
Y26 VHP O Power supply voltage output terminal
AA1 CRD_LINEOUT O Selection signal output to the headphone/line selecter
AA2 WAKEUP_INT I Wake up signal input terminal
AA3
AA4
AA5
GPIO9
SDR_A0
SDR_CLK
Not used
O Address signal output to the 256Mbit SD-RAM
O Clock signal output to the 256Mbit SD-RAM
AA22,
AA23
AA24
GND
TM2
-
-
Ground terminal
Not used
36
NW-A805/A806/A808/NWZ-A815/A816/A818
AC9
AC10 to
AC13
AC14
AC15
AC16
AC17
AC18
AC19
AC20
AC21
AC22
AC23
AC24
AB18
AB19
AB20
AB21
AB22
AB23,
AB24
AB25
AB26
AC1 to
AC3
AC4
AC5
AC6
AC7
Pin No.
AA25
AA26
AB1
AB2
AB3
AB4
AB5
AB6, AB7
Pin Name
VANAIN
VANA
VDD_L0
XUSB_OK
CRD_DET
CHG_XFLT
SDR_BA0
NC
I/O
O
I
I Power supply voltage input terminal
-
I
Power supply voltage output terminal
Power supply terminal
USB OK signal input from the charge control
I Wake up signal input from the WM-port
Description
Charge signal showing that the drive is in fault status is input
O Bank address signal output to the 256Mbit SD-RAM
Not used
AB8 USB_SUSPEND O USB suspend signal output to the charge control
AB9 IO_C Not used
AB10 to
AB12
AB13
AB14
NC
USB_XRST
USB_INT2
-
O
I
Not used
Reset signal output to the USB controller
Interrupt request signal input from the USB controller
AB15 to
AB17
MS_DATA3,
MS_DATA2,
MS_DATA0
Not used
MS_INSZ
WR_LEDCTL
PM1_SEN
PM1_CLK
PM0_SEN
Not used
Not used
I/O L/R sampling clock signal input/output terminal Not used
I Serial clock signal input terminal Not used
I/O L/R sampling clock signal input/output with the D/A converter
AC8
GND
GND1
OSCIN
IO_A
XCHG_DET
USB_INT1
NC
SPI0_SK
SPI0_SO
IO_C
I
I
-
-
-
I
-
O
Ground terminal
Ground terminal
Sub system clock input terminal (32.768kHz)
Not used
Charge detection signal input from the charge control
Interrupt request signal input from the USB controller
Not used
Serial data transfer clock signal output to the D/A converter
I/O
I2C mode : Serial date input/output with the D/A converter
SPI mode : Serial date output to the D/A converter
Not used
NC
AVDD_LPLL
AVDD_HPLL
MS_DATA1
MS_BS
MS_SCK0
NC
ADA_XRST
PM0_CLK
PM0_SO
PWM0
VLOIN
-
-
I
O
-
I
Not used
Power supply terminal
Power supply terminal
Not used
Not used
Not used
Not used
O Reset signal output to the D/A converter
Serial clock signal input from the D/A converter
Serial audio date output to the D/A converter
Not used
Power supply voltage input terminal
37
NW-A805/A806/A808/NWZ-A815/A816/A818
AE10,
AE11
AE12
AE13
AE14
AE15
AE16
AE17
AE18
AE19
AE20
AE21
AE22
AE23
Pin No.
AC25
AC26
AD1
AD7
AD8
AD9
Pin Name
IO_C
AD2, AD3 BDID1, BDID0
AD4 XHOLD_KEY
AD5
AD6
OSCOUT
NC
KEY_WAKE
NC
SPI0_CSZ2
VDD_L1
IO_C
I/O
Not used
Description
O Sub system clock output terminal (32.768kHz)
Not used
Not used
I Key hold on/off signal input from the hold switch
I Wake up control signal input terminal
Not used
O
I2C mode : Address signal output to the D/A converter
SPI mode : Chip select signal output to the D/A converter
Power supply terminal
Not used
AD10 to
AD13
NC Not used
AD14
AD15
AD16
AD17
AD18
AD19
AVDD_LPLL
AVDD_HPLL
NC
BKBAT
-
-
-
Power supply terminal
Power supply terminal
Not used
AD23
AD24
AD25
IO_A
NC
LCD_PWM1
NC
GND3
I Battery voltage detection input terminal
-
-
AD20 USB_PWRCTL O USB power control signal output terminal
AD21
AD22
GND2
PM0_SI
Ground terminal
I Serial audio date input from the D/A converter
O
Not used
Not used
PWM signal output to the LCD back light driver
Not used
Ground terminal
AD26,
AE1, AE2
AE3
AE4
NC Not used
AE5
AE6
AE7
AE8
AE9
DD2VFBK
DD2VFBSW
DD2GNDA
DD2INA
VDD_L0
VDD_L1
IO_C
I Power supply voltage feedback terminal
O Power supply voltage output terminal
Ground terminal
I Power supply voltage input terminal
Power supply terminal
Power supply terminal
Not used
NC
DD1INA
IO_B
AVDD_LPLL
AVDD_HPLL
GND
DD1VFBK
VDD_DSP
IO_A
VGP12IN
VGP3IN
VGP4
VGP5
-
I
O
O
Not used
Power supply voltage input terminal
Not used
Power supply terminal
Power supply terminal
Ground terminal
I Power supply voltage feedback terminal
Power supply terminal
Not used
I Power supply voltage input terminal
I Power supply voltage input terminal
Power supply voltage output terminal
Power supply voltage output terminal
38
NW-A805/A806/A808/NWZ-A815/A816/A818
Pin No.
AE24
AE25,
AE26, AF1 to AF3
AF4
AF10,
AF11
AF12,
AF13
AF14,
AF15
AF16,
AF17
AF18
AF19
AF20
AF21
AF22
AF23
AF24 to
AF26
Pin Name
VGP45IN
NC
AF5, AF6
AF7 to
AF9
DD2VFB2
DD2INB1,
DD2INB2
DD2LX3,
DD2LX1,
DD2LX2
DD2GNDB1,
DD2GNDB2
DD1GNDB1,
DD1GNDB2
DD1LX1,
DD1LX2
DD1INB1,
DD1INB2
DD1VFBK2
DD1GNDA
VGP1
COM
NC
VGP3
NC
I/O
I Power supply voltage input terminal
-
I
I
O
-
-
O
I
Not used
Power supply voltage feedback terminal
Power supply voltage input terminal
Power supply voltage output terminal
Ground terminal
Ground terminal
Power supply voltage output terminal
Power supply voltage input terminal
I Power supply voltage feedback terminal
Ground terminal
O Power supply voltage output terminal
Not used
Not used
O Power supply voltage output terminal
Not used
Description
39
NW-A805/A806/A808/NWZ-A815/A816/A818
MAIN BOARD IC803 XC2C64A-7CPG56C-01 (LEVEL SHIFT)
Pin No.
A1 to A4
A5
A6
A7, A8
Pin Name
R3_OUT to
R0_OUT
G5_OUT
TDO
G2_OUT,
G0_OUT
A9, A10
B5_OUT,
B4_OUT
B1
B10
C1
C3
R4_OUT
B3_OUT
R5_OUT
DATA_IN
C4, C5
C6
C7
C8
C10
D1
D3
G4_OUT,
G3_OUT
VCCIO2
GND
G1_OUT
B2_OUT
D8, D10
PXCLK_OUT
VAUX
B1_OUT,
B0_OUT
E1
E3
VSYNC_OUT
ERR_IN
DATA_OUT E8
E10
F1
F3
F8
VSYNC_IN
HSYNC_OUT
R4_IN
GND
F10 HSYNC_IN
G1, G3 R5_IN, R2_IN
G8 VCC
G10 B0_IN
H1, H3 R3_IN, R0_IN
H4
H5
H6
GND
PXCLK_IN
VCCIO1
H7, H8,
H10
J1
B4_IN, B2_IN,
B1_IN
J10
K1 to K6 G5_IN to G0_IN
K7, K8 B5_IN, B3_IN
K9
K10
R1_IN
TDI
TMS
TCK
I/O
O
O
O
O
O
O Video signal (R) output to the liquid crystal display
O Video signal (B) output to the liquid crystal display
O
-
O
-
-
O
O
O
-
O
O
I
-
I
-
I
I
I
I
I
I
I
I
I
Video signal (R) output to the liquid crystal display
Not used
Vertical sync signal output to the liquid crystal display
Not used
Not used
I Vertical sync signal input from the system controller
O Horizontal sync signal output to the liquid crystal display
Video signal (R) input from the system controller
Ground terminal
Horizontal sync signal input from the system controller
Video signal (R) input from the system controller
Power supply terminal
I Video signal (B) input from the system controller
I Video signal (R) input from the system controller
Ground terminal
I Clock signal input from the system controller
Power supply terminal
Description
Video signal (R) output to the liquid crystal display
Video signal (G) output to the liquid crystal display
Data output terminal for JTAG Not used
Video signal (G) output to the liquid crystal display
Video signal (B) output to the liquid crystal display
Video signal (G) output to the liquid crystal display
Power supply terminal
Ground terminal
Video signal (G) output to the liquid crystal display
Video signal (B) output to the liquid crystal display
Clock signal output to the liquid crystal display
Power supply terminal
Video signal (B) output to the liquid crystal display
Video signal (B) input from the system controller
Video signal (R) input from the system controller
Data input terminal for JTAG Not used
Video signal (G) input from the system controller
Video signal (B) input from the system controller
MS signal input terminal for JTAG Not used
Clock signal input terminal for JTAG Not used
40
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 6
EXPLODED VIEWS
NOTE:
•
-XX and -X mean standardized parts, so they may have some difference from the original one.
•
Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑ ↑
Parts Color Cabinet's Color
•
Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
•
The mechanical parts with no reference number in the exploded views are not supplied.
•
Accessories are given in the last of the electrical parts list.
•
Refer to Servicing Notes “COLOR VARIATION”
(page 5) about color variation.
6-1.
REAR CABINET SECTION (NW-A805/A806/A808)
•
Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
EE : East European model
FR : French model
HK : Hong kong model
JE : Tourist model
MX : Mexican model
NZ : New Zealand model
SP : Singapore model
3
1
(BLACK, VIOLET models only) not supplied
3
2
MAIN board, NAND board section
Ref. No.
Part No.
1
1
1
1
1
Description
X-2177-668-1 REAR CABINET ASSY (B) (BLACK)
Remark
(NW-A805: CND)
X-2177-669-1 REAR CABINET ASSY (B) (BLACK)
(NW-A806: CND)
X-2177-670-1 REAR CABINET ASSY (B) (BLACK)
(NW-A808: CND)
X-2177-674-1 REAR CABINET ASSY (W) (WHITE)
(NW-A805: CND)
X-2177-720-1 REAR CABINET ASSY (B) (BLACK)
(NW-A808: E, AUS, JE)
Ref. No.
Part No.
1
1
1
1
Description
X-2177-752-1 REAR CABINET ASSY (B) (BLACK)
Remark
(NW-A808: FR)
X-2177-753-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A805: FR)
X-2177-756-1 REAR CABINET ASSY (W) (WHITE)
(NW-A805: FR)
X-2177-757-1 REAR CABINET ASSY (W) (WHITE)
(NW-A806: FR)
1
1
1
1
1
1
X-2177-721-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A805: E, AUS, JE)
X-2177-722-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A806: E, AUS, JE)
X-2177-724-1 REAR CABINET ASSY (W) (WHITE)
(NW-A805: E, AUS, JE)
X-2177-725-1 REAR CABINET ASSY (W) (WHITE)
(NW-A806: E, AUS, JE)
X-2177-731-1 REAR CABINET ASSY (B) (BLACK)
(NW-A805: AEP, UK, EE)
1
1
1
1
1
X-2177-759-1 REAR CABINET ASSY (P) (PINK)
(NW-A805: FR)
X-2177-918-1 REAR CABINET ASSY (P) (PINK)
(NW-A806: CND)
X-2177-919-1 REAR CABINET ASSY (P) (PINK)
(NW-A806: E, AUS, JE)
X-2177-920-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A805: MX)
X-2177-921-1 REAR CABINET ASSY (B) (BLACK)
(NW-A806: MX)
1
1
1
1
1
X-2177-732-1 REAR CABINET ASSY (B) (BLACK)
(NW-A806: AEP, UK, EE)
X-2177-733-1 REAR CABINET ASSY (B) (BLACK)
(NW-A808: AEP, UK, EE)
X-2177-734-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A805: AEP, UK, EE)
X-2177-735-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A806: AEP, UK)
X-2177-737-1 REAR CABINET ASSY (W) (WHITE)
(NW-A805: AEP, UK, EE)
1
1
1
1
1
X-2177-922-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A806: MX)
X-2177-923-1 REAR CABINET ASSY (B) (BLACK)
(NW-A808: MX)
X-2178-903-1 REAR CABINET ASSY (B) (BLACK)
(NW-A805: CH)
X-2178-904-1 REAR CABINET ASSY (V) (VIOLET)
(NW-A805: CH)
X-2178-905-1 REAR CABINET ASSY (W) (WHITE)
(NW-A805: CH)
1
1
1
1
1
X-2177-738-1 REAR CABINET ASSY (W) (WHITE)
(NW-A806: AEP, UK, EE)
X-2177-739-1 REAR CABINET ASSY (W) (WHITE)
(NW-A808: AEP, UK)
X-2177-740-1 REAR CABINET ASSY (P) (PINK)
(NW-A805: AEP, UK, EE)
X-2177-741-1 REAR CABINET ASSY (P) (PINK)
(NW-A806: AEP, UK)
X-2177-750-1 REAR CABINET ASSY (B) (BLACK)
(NW-A805: FR)
1
1
1
1
2
3
X-2178-906-1 REAR CABINET ASSY (B) (BLACK)
(NW-A806: CH)
X-2178-907-1 REAR CABINET ASSY (W) (WHITE)
(NW-A806: CH)
X-2178-908-1 REAR CABINET ASSY (B) (BLACK)
(NW-A808: CH)
X-2178-912-1 REAR CABINET ASSY (P) (PINK)
(NW-A805: CH)
X-2186-850-1 REAR CABINET ASSY (B) (BLACK)
(NW-A806: E, AUS, JE)
2-889-243-01 PIN, ORNAMENT
3-196-648-01 ADHESIVE (REAR)
1 X-2177-751-1 REAR CABINET ASSY (B) (BLACK)
(NW-A806: FR)
41
NW-A805/A806/A808/NWZ-A815/A816/A818
6-2.
REAR CABINET SECTION (NWZ-A815/A816/A818)
(BLACK, SILVER, VIOLET, BLUE models only) not supplied
53
53
MAIN board, NAND board section
51
52
Note: Blue color type of NWZ-A816 US model is using parts of violet color type.
Ref. No.
Part No.
51
51
51
51
51
Description
X-2179-916-1 REAR CABINET ASSY (B) (BLACK)
Remark
(NWZ-A815: US)
X-2179-917-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A815: FR)
X-2179-918-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A815: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-920-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A815: US)
X-2179-921-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A815: FR)
Ref. No.
51
51
51
51
51
Part No.
Description
X-2179-939-1 REAR CABINET ASSY (S) (SILVER)
Remark
(NWZ-A816: FR)
X-2179-940-1 REAR CABINET ASSY (S) (SILVER)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-941-1 REAR CABINET ASSY (P) (PINK)
(NWZ-A816: US)
X-2179-942-1 REAR CABINET ASSY (P) (PINK)
(NWZ-A816: FR)
51
51
51
51
51
X-2179-922-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A815: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-924-1 REAR CABINET ASSY (S) (SILVER)
(NWZ-A815: US)
X-2179-925-1 REAR CABINET ASSY (P) (PINK)
(NWZ-A815: US)
X-2179-926-1 REAR CABINET ASSY (V) (VIOLET)
(NWZ-A815: US)
X-2179-932-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A816: US)
51
51
51
51
51
X-2179-943-1 REAR CABINET ASSY (P) (PINK)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-944-1 REAR CABINET ASSY (V) (BLUE)
(NWZ-A816: US)
X-2179-945-1 REAR CABINET ASSY (V) (VIOLET)
(NWZ-A816: FR)
X-2179-946-1 REAR CABINET ASSY (V) (VIOLET)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-952-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A818: US)
51
51
51
51
51
X-2179-933-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A816: FR)
X-2179-934-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-935-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A816: US)
X-2179-936-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A816: FR)
X-2179-937-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS)
51
51
51
51
51
X-2179-953-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A818: FR)
X-2179-954-1 REAR CABINET ASSY (B) (BLACK)
(NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-957-1 REAR CABINET ASSY (W) (WHITE)
(NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-958-1 REAR CABINET ASSY (S) (SILVER)
(NWZ-A818: US)
X-2179-961-1 REAR CABINET ASSY (P) (PINK)
(NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS)
51 X-2179-938-1 REAR CABINET ASSY (S) (SILVER)
(NWZ-A816: US)
52
53
X-2179-964-1 REAR CABINET ASSY (V) (VIOLET)
(NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS)
2-889-243-01 PIN, ORNAMENT
3-196-648-01 ADHESIVE (REAR)
42
NW-A805/A806/A808/NWZ-A815/A816/A818
6-3.
MAIN BOARD, NAND BOARD SECTION (NW-A805/A806/A808)
Note: The illustration sees the set from the rear.
not supplied
109
not supplied not supplied
108
112
107
110
106
(NW-A805/A806)
105
104
106
111
113
front cabinet section
102
103
Note: When the MAIN board is replaced, format it according to the “NOTE OF MAIN BOARD
REPLACING” (refer to page 4) of the servicing notes.
101
Ref. No.
101
102
103
104
105
106
107
107
107
107
107
107
107
107
107
Part No.
Description
X-2149-671-1 DOOR ASSY, CONNECTOR
2-889-236-01 SPRING (DOOR)
2-889-239-01 CONNECTOR, HOLDER
2-889-229-01 SHEET (NAND)
2-897-318-01 SPACER (NAND) (NW-A805/A806)
Remark
3-234-449-11 SCREW (M1.4)
X-2177-781-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: CND)
X-2177-782-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: CND)
X-2177-783-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: CND)
X-2177-784-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: AEP, UK, EE)
X-2177-785-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: AEP, UK, EE)
X-2177-786-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: AEP, UK, EE)
X-2177-787-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: FR)
X-2177-788-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: FR)
X-2177-789-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: FR)
Ref. No.
Part No.
107
107
107
107
107
Description Remark
X-2177-790-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: E, MX, AUS, JE)
X-2177-791-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: E, MX, AUS, JE)
X-2177-792-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: E, MX, AUS, JE)
X-2178-909-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: CH)
X-2178-910-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: CH)
107
108
109
110
110
111
112
113
X-2178-911-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
3-208-193-01 SPACER (REAR)
2-889-227-01 SHIELD CASE (MAIN)
2-894-337-01 SHEET (MAIN), INSULATING
2-894-339-01 SHEET (HARNESS)
2-889-228-01 CUSHION (CONNECTOR)
(NW-A808: CH)
X-2177-776-1 MAIN BOARD, COMPLETE (for SERVICE)
(EXCEPT FR)
X-2177-777-1 MAIN BOARD, COMPLETE (for SERVICE) (FR)
43
NW-A805/A806/A808/NWZ-A815/A816/A818
6-4.
MAIN BOARD, NAND BOARD SECTION (NWZ-A815/A816/A818)
Note: The illustration sees the set from the rear.
159
not supplied not supplied not supplied
158
162
157
160
156
(NWZ-A815/A816)
155
154
156
161
163
front cabinet section
152
153
151
Note: When the MAIN board is replaced, format it according to the “NOTE OF MAIN BOARD
REPLACING” (refer to page 4) of the servicing notes.
Ref. No.
151
152
153
154
155
156
157
157
157
157
Part No.
Description
X-2149-671-1 DOOR ASSY, CONNECTOR
2-889-236-01 SPRING (DOOR)
2-889-239-01 CONNECTOR, HOLDER
2-889-229-01 SHEET (NAND)
2-897-318-01 SPACER (NAND) (NWZ-A815/A816)
Remark Ref. No.
Part No.
157
157
157
Description Remark
X-2179-977-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NWZ-A818: US)
X-2179-978-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NWZ-A818: FR)
X-2179-979-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS)
3-234-449-11 SCREW (M1.4)
X-2179-971-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NWZ-A815: US)
X-2179-972-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NWZ-A815: FR)
X-2179-973-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NWZ-A815: CND, AEP, UK, EE, NZ, HK, SP, AUS)
X-2179-974-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: US, US (CircuitCity))
157
158
159
160
160
X-2187-874-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
3-208-193-01 SPACER (REAR)
2-889-227-01 SHIELD CASE (MAIN)
(NWZ-A816: US (BestBuy))
X-2177-776-1 MAIN BOARD, COMPLETE (for SERVICE)
(EXCEPT FR)
X-2177-777-1 MAIN BOARD, COMPLETE (for SERVICE) (FR)
157
157
X-2179-975-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: FR)
X-2179-976-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS)
161
162
163
2-894-337-01 SHEET (MAIN), INSULATING
2-894-339-01 SHEET (HARNESS)
2-889-228-01 CUSHION (CONNECTOR)
44
6-5.
FRONT CABINET SECTION
Note: The illustration sees the set from the rear.
201
203
202
210
204
NW-A805/A806/A808/NWZ-A815/A816/A818
LCD801
209
205 not supplied
206 not supplied
208
207
208 207
Note: Blue color type of NWZ-A816 US model is using parts of violet color type.
Ref. No.
Part No.
201
201
201
201
201
Description
X-2177-802-1 FRONT CABINET ASSY (B) (BLACK)
X-2177-803-1 FRONT CABINET ASSY (V) (VIOLET)
Remark
(for VIOLET, BLUE)
X-2177-804-1 FRONT CABINET ASSY (W) (WHITE)
X-2177-805-1 FRONT CABINET ASSY (P) (PINK)
X-2177-806-1 FRONT CABINET ASSY (S) (SILVER)
Ref. No.
Part No.
206
206
207
Description
2-889-233-31 BUTTON, FRONT
Remark
(v B V b, u, OPTION, BACK) (PINK)
2-889-233-41 BUTTON, FRONT
(v B V b, u, OPTION, BACK) (SILVER)
2-894-335-01 ADHESIVE (LCD)
202
203
204
205
206
3-196-649-01 GASKET (REAR)
2-889-232-01 BUTTON, VOL (
−
VOL +)
X-2177-801-1 FLEXIBLE (PWB ASSY), SVX SWITCH
3-208-376-01 SHEET (JACK), CONDUCTIVE
2-889-233-01 BUTTON, FRONT
(v B V b, u, OPTION, BACK) (BLACK)
208
209
209
209
210
3-252-823-01 SCREW (B1.4)
X-2177-657-1 BATTERY (A) ASSY (for NW-A805/A806/A808)
X-2178-011-1 BATTERY ASSY (for NW-A805/A806/A808)
(CND)
(EXCEPT CND)
X-2189-758-1 BATTERY ASSY (for NWZ-A815/A816/A818)
3-251-410-02 SHEET, INSULATING
206
206
2-889-233-11 BUTTON, FRONT
(v B V b, u, OPTION, BACK) (WHITE)
2-889-233-21 BUTTON, FRONT
(v B V b, u, OPTION, BACK) (VIOLET)
(for VIOLET, BLUE)
LCD801 X-2178-012-1 SVX LCD ASSY
45
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 7
MAIN
ELECTRICAL PARTS LIST
NOTE:
•
Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set.
•
-XX and -X mean standardized parts, so they may have some difference from the original one.
•
RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
•
Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
•
SEMICONDUCTORS
In each case, u:
µ
, for example: uA... :
µ
A...
uPA... :
µ
PA...
uPB... :
µ
PB...
uPC... :
µ
PC...
uPD... :
µ
PD...
•
CAPACITORS uF:
µ
F
•
COILS uH:
µ
H
•
Refer to Servicing Notes “COLOR VARIATION”
(page 5) about color variation.
•
Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
EE : East European model
FR : French model
HK : Hong kong model
JE : Tourist model
MX : Mexican model
NZ : New Zealand model
SP : Singapore model
When indicating parts by reference number, please include the board.
Ref. No.
Part No.
Description
X-2177-776-1 MAIN BOARD, COMPLETE (for SERVICE)
(EXCEPT FR)
*********************
Remark Ref. No.
Part No.
Description
C504 1-112-716-11 CERAMIC CHIP 0.1uF
C505 1-112-716-11 CERAMIC CHIP 0.1uF
X-2177-777-1 MAIN BOARD, COMPLETE (for SERVICE) (FR)
< CAPACITOR >
C506 1-112-716-11 CERAMIC CHIP 0.1uF
C507 1-112-716-11 CERAMIC CHIP 0.1uF
C508 1-112-716-11 CERAMIC CHIP 0.1uF
C509 1-112-716-11 CERAMIC CHIP 0.1uF
C510 1-112-716-11 CERAMIC CHIP 0.1uF
C102 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V
C103 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C104 1-112-322-91 CERAMIC CHIP 150PF 10% 6.3V
C105 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C106 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C511
C512
C513
1-112-717-91 CERAMIC CHIP
1-112-717-91 CERAMIC CHIP
1-112-716-11 CERAMIC CHIP
1uF
1uF
0.1uF
C514 1-112-716-11 CERAMIC CHIP 0.1uF
C515 1-112-716-11 CERAMIC CHIP 0.1uF
C107 1-137-987-81 CERAMIC CHIP 0.068uF
10% 10V
C108 1-128-622-91 CERAMIC CHIP 100PF 10% 16V
C109 1-100-581-81 CERAMIC CHIP 0.0047uF
10% 50V
C110 1-165-887-91 CERAMIC CHIP 0.22uF
10% 6.3V
C202 1-112-717-91 CERAMIC CHIP 1uF 10% 6.3V
C516
C517
C518
1-112-716-11 CERAMIC CHIP
1-112-716-11 CERAMIC CHIP
1-112-716-11 CERAMIC CHIP
0.1uF
0.1uF
0.1uF
C601 1-112-717-91 CERAMIC CHIP 1uF
C602 1-112-717-91 CERAMIC CHIP 1uF C203 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C204 1-112-322-91 CERAMIC CHIP 150PF 10% 6.3V
C205 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C206 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C207 1-137-987-81 CERAMIC CHIP 0.068uF
10% 10V
C603
C604
C605
1-112-717-91 CERAMIC CHIP
1-112-717-91 CERAMIC CHIP
1-112-717-91 CERAMIC CHIP
1uF
1uF
1uF
C606 1-112-717-91 CERAMIC CHIP 1uF
C607 1-112-717-91 CERAMIC CHIP 1uF C208 1-100-581-81 CERAMIC CHIP 0.0047uF
10% 50V
C209 1-128-622-91 CERAMIC CHIP 100PF 10% 16V
C210 1-165-887-91 CERAMIC CHIP 0.22uF
10% 6.3V
C301 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C302 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C303 1-112-716-11 CERAMIC CHIP 0.1uF
C305 1-100-735-91 CERAMIC CHIP 10uF
C306 1-112-716-11 CERAMIC CHIP 0.1uF
C307 1-100-735-91 CERAMIC CHIP 10uF
C308 1-112-717-91 CERAMIC CHIP 1uF
C310 1-112-716-11 CERAMIC CHIP 0.1uF
C311 1-112-717-91 CERAMIC CHIP 1uF
C312 1-100-611-91 CERAMIC CHIP 22uF
C313 1-112-716-11 CERAMIC CHIP 0.1uF
C314 1-112-717-91 CERAMIC CHIP 1uF
10% 6.3V
20% 4V
10% 6.3V
20% 4V
10% 6.3V
10% 6.3V
10% 6.3V
20% 6.3V
10% 6.3V
10% 6.3V
C315 1-112-717-91 CERAMIC CHIP 1uF
C316 1-100-611-91 CERAMIC CHIP 22uF
C318 1-112-716-11 CERAMIC CHIP 0.1uF
C319 1-100-507-91 CERAMIC CHIP 4.7uF
10%
20%
10%
20%
6.3V
6.3V
6.3V
6.3V
C321 1-107-819-11 CERAMIC CHIP 0.022uF
10% 16V
C501 1-164-856-81 CERAMIC CHIP 18PF
C502 1-164-854-11 CERAMIC CHIP 15PF
C503 1-100-352-91 CERAMIC CHIP 1uF
5%
5%
50V
50V
20% 16V
C608
C609
C610 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C611 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C612 1-112-716-11 CERAMIC CHIP 0.1uF
C613
C614
C615
1-112-717-91 CERAMIC CHIP
1-112-717-91 CERAMIC CHIP
1uF
1uF
C616 1-112-716-11 CERAMIC CHIP 0.1uF
C617 1-112-716-11 CERAMIC CHIP 0.1uF
C618
C619
C620
1-112-716-11 CERAMIC CHIP
1-112-717-91 CERAMIC CHIP
1-112-716-11 CERAMIC CHIP
0.1uF
1uF
0.1uF
C622 1-112-717-91 CERAMIC CHIP 1uF
C623 1-164-935-11 CERAMIC CHIP 470PF
C625
C626
C628
1-112-716-11 CERAMIC CHIP
1-164-935-11 CERAMIC CHIP
1-112-716-11 CERAMIC CHIP
0.1uF
470PF
0.1uF
C629 1-112-717-91 CERAMIC CHIP 1uF
C631 1-164-943-81 CERAMIC CHIP 0.01uF
C632
1-117-746-81 CERAMIC CHIP
1-117-746-81 CERAMIC CHIP
1-164-935-11 CERAMIC CHIP
1-100-352-91 CERAMIC CHIP
8PF
8PF
470PF
1uF
10%
10%
10%
10%
10%
10%
10%
Remark
6.3V
6.3V
6.3V
6.3V
6.3V
6.3V
10% 6.3V
10% 6.3V
10% 6.3V
10% 6.3V
10%
10% 6.3V
10% 6.3V
10% 6.3V
10% 6.3V
10%
10% 6.3V
10% 6.3V
10% 6.3V
10% 6.3V
10%
10% 6.3V
10% 6.3V
10% 6.3V
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
0.1PF
0.1PF
10%
10%
10%
20%
6.3V
6.3V
6.3V
6.3V
6.3V
6.3V
6.3V
6.3V
6.3V
6.3V
50V
6.3V
6.3V
50V
16V
16V
50V
6.3V
16V
16V
46
Note: When the MAIN board is replaced, format it according to the “NOTE OF MAIN BOARD
REPLACING” (refer to page 3) of the servicing notes.
NW-A805/A806/A808/NWZ-A815/A816/A818
MAIN
Ref. No.
Part No.
Description
C633 1-112-716-11 CERAMIC CHIP 0.1uF
C634 1-112-716-11 CERAMIC CHIP 0.1uF
C638 1-112-717-91 CERAMIC CHIP 1uF
C640 1-112-717-91 CERAMIC CHIP 1uF
Remark
10% 6.3V
10% 6.3V
10% 6.3V
10% 6.3V
C641 1-100-611-91 CERAMIC CHIP 22uF
C643 1-112-717-91 CERAMIC CHIP 1uF
C644 1-100-611-91 CERAMIC CHIP 22uF
C645 1-112-716-11 CERAMIC CHIP 0.1uF
C646 1-112-716-11 CERAMIC CHIP 0.1uF
20% 6.3V
10% 6.3V
20% 6.3V
10% 6.3V
10% 6.3V
C647 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C648 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C649 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C650 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C651 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C652 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C653 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C654 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C655 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C656 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C657 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C660 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C661 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C662 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C664 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C665 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C666 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C667 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C668 1-117-743-81 CERAMIC CHIP 5PF 0.1PF
16V
C669 1-117-743-81 CERAMIC CHIP 5PF 0.1PF
16V
C670 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C671 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C672 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C673 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C674 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C675 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C676 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C677 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C678 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C679 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C680 1-112-716-11 CERAMIC CHIP 0.1uF
C681 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
10% 6.3V
C682 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C683 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C684 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C685 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C686 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C687 1-112-716-11 CERAMIC CHIP 0.1uF
C688 1-112-716-11 CERAMIC CHIP 0.1uF
10%
10%
6.3V
6.3V
C689 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C690 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C691 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C692 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C694 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C695 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C697 1-128-627-91 CERAMIC CHIP 0.001uF
10% 16V
C698 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C701 1-112-716-11 CERAMIC CHIP 0.1uF
C702 1-128-622-91 CERAMIC CHIP 100PF
10%
10%
6.3V
16V
Ref. No.
Part No.
Description
C703 1-112-716-11 CERAMIC CHIP 0.1uF
C704 1-128-622-91 CERAMIC CHIP 100PF
C705 1-112-716-11 CERAMIC CHIP 0.1uF
C706 1-128-622-91 CERAMIC CHIP 100PF
C707 1-112-716-11 CERAMIC CHIP 0.1uF
C708 1-128-622-91 CERAMIC CHIP 100PF
C709 1-112-716-11 CERAMIC CHIP 0.1uF
C710 1-128-622-91 CERAMIC CHIP 100PF
C711 1-112-716-11 CERAMIC CHIP 0.1uF
C712 1-128-622-91 CERAMIC CHIP 100PF
C713 1-112-716-11 CERAMIC CHIP 0.1uF
Remark
10% 6.3V
10% 16V
10% 6.3V
10% 16V
10% 6.3V
10% 16V
10% 6.3V
10% 16V
10% 6.3V
10% 16V
10% 6.3V
C714 1-128-622-91 CERAMIC CHIP 100PF
C802 1-112-716-11 CERAMIC CHIP 0.1uF
C804 1-112-716-11 CERAMIC CHIP 0.1uF
C806 1-112-716-11 CERAMIC CHIP 0.1uF
C807 1-112-716-11 CERAMIC CHIP 0.1uF
C808 1-112-716-11 CERAMIC CHIP 0.1uF
C810 1-100-591-91 CERAMIC CHIP 1uF
C811 1-100-566-91 CERAMIC CHIP 0.1uF
C812 1-100-566-91 CERAMIC CHIP 0.1uF
C813 1-112-716-11 CERAMIC CHIP 0.1uF
10% 16V
10% 6.3V
10% 6.3V
10% 6.3V
10% 6.3V
10% 6.3V
10% 25V
10% 25V
10% 25V
10% 6.3V
C853 1-164-931-11 CERAMIC CHIP 100PF
C901 1-100-966-91 CERAMIC CHIP 10uF
C902 1-125-777-11 CERAMIC CHIP 0.1uF
C903 1-112-716-11 CERAMIC CHIP 0.1uF
C904 1-112-716-11 CERAMIC CHIP 0.1uF
10% 50V
20% 10V
10% 10V
10% 6.3V
10% 6.3V
C905 1-137-987-81 CERAMIC CHIP 0.068uF
10% 10V
C906 1-112-716-11 CERAMIC CHIP 0.1uF
10% 6.3V
C907 1-100-611-91 CERAMIC CHIP 22uF
C908 1-112-716-11 CERAMIC CHIP 0.1uF
C909 1-100-611-91 CERAMIC CHIP 22uF
20%
10%
20%
6.3V
6.3V
6.3V
C910 1-100-505-11 CERAMIC CHIP 0.1uF
20% 16V
C911 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C912 1-100-611-91 CERAMIC CHIP 22uF
C913 1-100-611-91 CERAMIC CHIP 22uF
C915 1-100-611-91 CERAMIC CHIP 22uF
20%
20%
20%
6.3V
6.3V
6.3V
C917 1-100-611-91 CERAMIC CHIP 22uF
C920 1-100-670-11 CERAMIC CHIP 4.7uF
C921 1-100-611-91 CERAMIC CHIP 22uF
< CONNECTOR >
20%
20%
20%
6.3V
16V
6.3V
CN601 (Not supplied) CONNECTOR, BOARD TO BOARD 30P
CN801 1-819-974-11 CONNECTOR, FPC (ZIF) 33P
CN851 1-820-771-21 CONNECTOR, MULTIPLE (RECEPTACL)
(WM-PORT)
CN901 1-820-726-21 RECEPTACLE, CONNECTOR
< DIODE >
D101 8-719-083-04 DIODE RSB6.8STE61
D201 8-719-083-04 DIODE RSB6.8STE61
< FERRITE BEAD >
FB101 1-400-851-11 EMI, FERRITE (SMD) (1005)
FB201 1-400-851-11 EMI, FERRITE (SMD) (1005)
FB301 1-400-915-21 INDUCTOR (EMI FERRITE) (2012)
FB801 1-481-258-21 SMD EMI FERRITE
FB802 1-481-258-21 SMD EMI FERRITE
Note: When CN601 on the MAIN board is damaged, exchange the new MAIN board for the MAIN board which connector damaged.
47
NW-A805/A806/A808/NWZ-A815/A816/A818
MAIN
Ref. No.
Part No.
Description
FB803 1-481-258-21 SMD EMI FERRITE
FB804 1-481-258-21 SMD EMI FERRITE
FB805 1-481-258-21 SMD EMI FERRITE
FB806 1-481-258-21 SMD EMI FERRITE
FB807 1-481-258-21 SMD EMI FERRITE
FB808 1-481-258-21 SMD EMI FERRITE
FB809 1-481-258-21 SMD EMI FERRITE
FB810 1-481-258-21 SMD EMI FERRITE
FB811 1-481-258-21 SMD EMI FERRITE
FB812 1-481-258-21 SMD EMI FERRITE
FB813 1-481-258-21 SMD EMI FERRITE
FB814 1-481-258-21 SMD EMI FERRITE
FB815 1-481-258-21 SMD EMI FERRITE
FB816 1-481-258-21 SMD EMI FERRITE
FB817 1-481-258-21 SMD EMI FERRITE
FB818 1-481-258-21 SMD EMI FERRITE
FB819 1-400-462-21 FERRITE, EMI (SMD) (1005)
< IC >
IC301 (Not supplied) IC XC6401FF58DR
IC302 (Not supplied) IC CS42L51-CNZR
IC303 6-708-971-01 IC MAX4764ETB+TG069
IC501 (Not supplied) IC S1R72V17B00A20B
IC502 6-708-511-01 IC TC7SG08AFS
IC503 (Not supplied) IC TK63731AB1G0B
IC504 6-711-031-01 IC TK63718HCL-G
IC505 (Not supplied) IC TC7WG74FC
IC506 (Not supplied) IC TC7WG74FC
IC507 6-710-712-01 IC TC7SG04AFS
IC508 6-710-712-01 IC TC7SG04AFS
IC509 (Not supplied) IC SN74AVC1T45YZPR
IC601 (Not supplied) IC MC-10051F1-FAE-A
IC602 (Not supplied) IC TK63731AB1G0B
IC701 (Not supplied) IC K4M56323PG-HG75T
IC802 (Not supplied) IC BD6069GUT-E2
IC803 (Not supplied) IC XC2C64A-7CPG56C-01
IC901 (Not supplied) IC MAX8677AETG
IC903 (Not supplied) IC MAX1557ETB
< COIL >
Remark
L601
L602
L801
L901
1-457-412-11 INDUCTOR
1-457-412-11 INDUCTOR
1-481-213-11 INDUCTOR
1-481-097-11 INDUCTOR
10uH
10uH
22uH
4.7uH
LF851 1-456-984-11 COIL, COMMONMODECHOKE (SMD1210)
< TRANSISTOR >
Q301
Q302
Q303
Q304
Q603
6-550-282-01 TRANSISTOR
6-551-186-01 TRANSISTOR
6-551-186-01 TRANSISTOR
6-550-282-01 TRANSISTOR
6-550-747-01 FET
Q903 6-551-346-01 FET
< RESISTOR >
R102 1-208-715-11 METAL CHIP
R104 1-208-715-11 METAL CHIP
R105 1-218-937-11 RES-CHIP
UNR31A600LS0
EMX18
EMX18
UNR31A600LS0
3LP01S-K-TL-E
2SK3541T2L
22K
22K
47
0.5%
0.5%
5%
1/16W
1/16W
1/16W
Ref. No.
R107
R202
R204
R205
R206
R207
R207
Part No.
Description
R106 1-218-949-11 RES-CHIP
R107 1-208-455-11 RES-CHIP
1-218-937-11 RES-CHIP
R108 1-218-949-11 RES-CHIP
R109 1-218-949-11 RES-CHIP
R110 1-244-161-81 RES-CHIP
R111 1-218-949-11 RES-CHIP
1-208-715-11 METAL CHIP
1-208-715-11 METAL CHIP
1-218-937-11 RES-CHIP
1-218-949-11 RES-CHIP
1-208-455-11 RES-CHIP
1-218-937-11 RES-CHIP
R208 1-218-949-11 RES-CHIP
R209 1-218-949-11 RES-CHIP
R210 1-244-161-81 RES-CHIP
R211 1-218-949-11 RES-CHIP
R302 1-218-990-81 SHORT CHIP
R304 1-218-979-11 RES-CHIP
R305 1-218-981-91 RES-CHIP
R306 1-218-990-81 SHORT CHIP
R307
R315
R506
R512
R519
R602
R603
R604
R605
R607
R608
1-208-683-11 METAL CHIP
R310 1-218-990-81 SHORT CHIP
R312 1-218-990-81 SHORT CHIP
R313 1-208-683-11 METAL CHIP
R314 1-218-990-81 SHORT CHIP
1-218-945-11 RES-CHIP
R502 1-218-990-81 SHORT CHIP
R503 1-218-977-11 RES-CHIP
R504 1-218-977-11 RES-CHIP
R505 1-218-977-11 RES-CHIP
1-208-906-81 METAL CHIP
R507 1-218-953-11 RES-CHIP
R509 1-218-990-81 SHORT CHIP
R510 1-218-933-11 RES-CHIP
R511 1-218-981-91 RES-CHIP
1-218-990-81 SHORT CHIP
R513 1-240-718-91 METAL CHIP
R514 1-218-929-11 RES-CHIP
R516 1-218-929-11 RES-CHIP
R517 1-218-990-81 SHORT CHIP
1-218-977-11 RES-CHIP
R520 1-218-977-11 RES-CHIP
R521 1-218-990-81 SHORT CHIP
R522 1-218-990-81 SHORT CHIP
R601 1-240-718-91 METAL CHIP
1-218-990-81 SHORT CHIP
1-218-965-11 RES-CHIP
1-218-990-81 SHORT CHIP
1-218-990-81 SHORT CHIP
1-218-985-11 RES-CHIP
1-218-953-11 RES-CHIP
470
5.6
22K
22K
47
470
5.6
47
470
470
2.2
470
47
470
470
2.2
470
100K
10
10
0
100K
100K
0
0
100K
0
10K
0
0
470K
1K
0
100K
100K
100K
6.2K
1K
0
22
220K
0
0
0
1K
0
220
0
150K
220K
0
1K
5%
5%
5%
5%
5%
Remark
5%
5%
1/16W
1/16W
(EXCEPT FR)
1/16W
(FR)
1/16W
1/16W
1/16W
1/16W
(FR)
5%
5%
5%
5%
0.5% 1/16W
0.5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
(EXCEPT FR)
5% 1/16W
(FR)
1/16W
1/16W
1/16W
1/16W
(FR)
5%
5%
1/16W
1/16W
0.5% 1/16W
0.5% 1/16W
5% 1/16W
5%
5%
5%
5%
5%
1/16W
1/16W
5% 1/16W
0.5% 1/16W
1/16W
1/16W
1/16W
5%
5%
5%
5%
5%
1/20W
1/16W
1/16W
1/16W
1/16W
5% 1/20W
5% 1/16W
5%
5%
1/16W
1/16W
48
Note: When IC301, IC302, IC501, IC503, IC505, IC506, IC509, IC601, IC602,
IC701, IC802, IC803, IC901 and IC903 on the MAIN board are damaged, exchange the new MAIN board for the MAIN board which IC damaged.
470K
470K
4.7K
4.7K
1K
470K
100K
100K
100K
100K
47K
47K
47K
47K
47K
0
0
1K
100K
0
0
100K
100K
1K
470K
470K
100
0
1M
0
0
0
0
0
0
0
1K
0.22
0.22
0
10K
47K
33K
22
470K
0
100K
100K
0
0
0
0
10K
100K
100K
47K
0
100K
Ref. No.
Part No.
Description
R611 1-218-990-81 SHORT CHIP
R615 1-218-953-11 RES-CHIP
R616 1-245-684-21 RES-CHIP
R617 1-245-684-21 RES-CHIP
R618 1-218-990-81 SHORT CHIP
R619 1-218-990-81 SHORT CHIP
R620 1-218-990-81 SHORT CHIP
R621 1-218-990-81 SHORT CHIP
R622 1-218-990-81 SHORT CHIP
R623 1-218-990-81 SHORT CHIP
R624 1-218-990-81 SHORT CHIP
R625 1-240-718-91 METAL CHIP
R626 1-240-718-91 METAL CHIP
R627 1-240-695-91 METAL CHIP
R628 1-218-985-11 RES-CHIP
R629 1-218-985-11 RES-CHIP
R630 1-218-941-81 RES-CHIP
R633 1-218-990-81 SHORT CHIP
R634 1-218-989-11 RES-CHIP
R635 1-218-990-81 SHORT CHIP
R636 1-240-714-91 METAL CHIP
R637 1-240-714-91 METAL CHIP
R638 1-240-714-91 METAL CHIP
R639 1-240-714-91 METAL CHIP
R640 1-240-714-91 METAL CHIP
R641 1-218-953-11 RES-CHIP
R642 1-208-935-11 METAL CHIP
R643 1-218-990-81 SHORT CHIP
R644 1-218-990-81 SHORT CHIP
R645 1-218-990-81 SHORT CHIP
R646 1-218-985-11 RES-CHIP
R647 1-218-985-11 RES-CHIP
R648 1-208-699-11 METAL CHIP
R649 1-208-699-11 METAL CHIP
R650 1-218-953-11 RES-CHIP
R651 1-218-985-11 RES-CHIP
R652 1-218-977-11 RES-CHIP
R653 1-218-977-11 RES-CHIP
R655 1-240-718-91 METAL CHIP
R656 1-240-718-91 METAL CHIP
R657 1-240-718-91 METAL CHIP
R658 1-240-718-91 METAL CHIP
R660 1-240-714-91 METAL CHIP
R701 1-218-990-81 SHORT CHIP
R702 1-218-977-11 RES-CHIP
R801 1-218-990-81 SHORT CHIP
R802 1-218-990-81 SHORT CHIP
R803 1-218-990-81 SHORT CHIP
R804 1-218-990-81 SHORT CHIP
R805 1-218-965-11 RES-CHIP
R806 1-218-965-11 RES-CHIP
R807 1-208-927-11 METAL CHIP
R808 1-208-923-11 METAL CHIP
R809 1-208-643-11 METAL CHIP
R811 1-218-985-11 RES-CHIP
R812 1-218-990-81 SHORT CHIP
R813 1-218-977-11 RES-CHIP
R814 1-218-977-11 RES-CHIP
5% 1/16W
5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
5% 1/16W
5%
5%
1/16W
1/16W
NW-A805/A806/A808/NWZ-A815/A816/A818
MAIN
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
1/20W
1/20W
1/20W
1/20W
1/20W
5% 1/16W
0.5% 1/16W
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
1/16W
1/16W
0.5% 1/16W
0.5% 1/16W
5% 1/16W
1/16W
1/16W
1/16W
1/20W
1/20W
1/20W
1/20W
1/20W
1/16W
1/20W
1/20W
1/20W
1/16W
1/16W
1/16W
1/16W
Remark
1/16W
1/8W
1/8W
Ref. No.
Part No.
R816
R851
Description
1-218-990-81 SHORT CHIP
1-218-953-11 RES-CHIP
R853 1-218-953-11 RES-CHIP
R855 1-208-927-11 METAL CHIP
R857 1-218-985-11 RES-CHIP
R858 1-218-965-11 RES-CHIP
R859 1-218-953-11 RES-CHIP
R861
R901
R902
R903
R904
R910
R911
R912
R913
R914
1-216-295-91 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-218-985-11 RES-CHIP
1-218-985-11 RES-CHIP
R905 1-208-687-11 METAL CHIP
R906 1-218-959-11 RES-CHIP
R907 1-218-985-11 RES-CHIP
R908 1-218-965-11 RES-CHIP
R909 1-208-715-11 METAL CHIP
1-208-923-11 METAL CHIP
1-218-985-11 RES-CHIP
1-208-909-11 METAL CHIP
1-208-911-11 METAL CHIP
1-208-927-11 METAL CHIP
R915 1-208-923-11 METAL CHIP
R919 1-208-911-11 METAL CHIP
R921 1-218-981-91 RES-CHIP
R922 1-218-981-91 RES-CHIP
R923 1-218-985-11 RES-CHIP
0
1K
1K
47K
470K
10K
1K
0
0
0
470K
470K
1.5K
3.3K
470K
10K
22K
33K
470K
8.2K
10K
47K
33K
10K
220K
220K
470K
< SWITCH >
S601 1-786-227-21 SWITCH, TACTILE (RESET)
S602 1-798-038-11 SWITCH, SLIDE (SMD) (HOLD)
< THERMISTOR >
TH901 1-804-949-11 THERMISTOR, NTC (SMD)
Remark
5% 1/16W
5% 1/16W
0.5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
5%
5%
1/16W
1/16W
0.5% 1/16W
5% 1/16W
5%
5%
1/16W
1/16W
0.5% 1/16W
0.5% 1/16W
5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
< VARISTOR >
VDR301 1-805-774-21 VARISTOR, CHIP
VDR851 1-805-774-21 VARISTOR, CHIP
VDR852 1-805-774-21 VARISTOR, CHIP
< VIBRATOR >
X501 1-813-877-11 VIBRATOR, CRYSTAL 12MHZ (12MHz)
X602 1-813-206-11 VIBRATOR, CRYSTAL (32.768kHz)
X603 1-795-758-21 VIBRATOR, CRYSTAL (11.2896MHz)
************************************************************
49
NW-A805/A806/A808/NWZ-A815/A816/A818
NAND
Ref. No.
Part No.
Description Remark Ref. No.
Part No.
X-2177-781-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: CND)
X-2177-782-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: CND)
X-2177-783-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: CND)
X-2177-784-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: AEP, UK, EE)
X-2177-785-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: AEP, UK, EE)
204
209
Description
MISCELLANEOUS
**************
Remark
X-2177-801-1 FLEXIBLE (PWB ASSY), SVX SWITCH
X-2177-657-1 BATTERY (A) ASSY (for NW-A805/A806/A808)
X-2178-011-1 BATTERY ASSY (for NW-A805/A806/A808)
(CND)
209
209
LCD801 X-2178-012-1 SVX LCD ASSY
(EXCEPT CND)
X-2189-758-1 BATTERY ASSY (for NWZ-A815/A816/A818)
************************************************************
X-2177-786-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: AEP, UK, EE)
X-2177-787-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: FR)
X-2177-788-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: FR)
X-2177-789-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: FR)
X-2177-790-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: E, MX, AUS, JE)
X-2177-791-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: E, MX, AUS, JE)
X-2177-792-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: E, MX, AUS, JE)
X-2178-909-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NW-A805: CH)
X-2178-910-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NW-A806: CH)
X-2178-911-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NW-A808: CH)
X-2179-971-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NWZ-A815: US)
X-2179-972-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NWZ-A815: FR)
X-2179-973-1 NAND BOARD, COMPLETE (2GB) (for SERVICE)
(NWZ-A815: CND, AEP, UK, EE, NZ, HK, SP,
AUS)
X-2179-974-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: US, US (CircuitCity))
X-2179-975-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: FR)
ACCESSORIES
************
1-831-429-21 CORD, CONNECTION
(Headphone extension cord) (BLACK)
(for BLACK, SILVER, VIOLET, BLUE models)
1-831-429-31 CORD, CONNECTION
(Headphone extension cord) (WHITE)
(for WHITE, PINK models)
1-833-490-12 CORD, PC CONNECTION (USB cable)
2-895-532-02 ATTACHMENT (D) (Use when connecting the player to the optional cradle, etc.)
2-896-040-14 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (ENGLISH)
(NW-A805: EXCEPT CH/A806: EXCEPT CH/
A808: EXCEPT CH)
2-896-040-23 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (FRENCH) (NW-A805: CND, AEP, UK, FR/
A806: CND, AEP, UK, FR/
A808: CND, AEP, UK, FR)
2-896-040-34 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (GERMAN) (NW-A805: AEP, UK/
A806: AEP, UK/A808: AEP, UK)
2-896-040-43 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (SPANISH) (NW-A805: AEP, UK, MX/
A806: AEP, UK, MX/A808: AEP, UK, MX)
2-896-040-53 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (ITALIAN) (NW-A805: AEP, UK/
A806: AEP, UK/A808: AEP, UK)
2-896-040-63 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (RUSSIAN)
(NW-A805: EE/A806: EE/A808: EE)
X-2179-976-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP,
AUS)
X-2179-977-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NWZ-A818: US)
X-2179-978-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NWZ-A818: FR)
X-2179-979-1 NAND BOARD, COMPLETE (8GB) (for SERVICE)
(NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP,
AUS)
X-2187-874-1 NAND BOARD, COMPLETE (4GB) (for SERVICE)
(NWZ-A816: US (BestBuy))
*********************
When NAND board is defective, exchange the entire mounted board.
************************************************************
2-896-040-73 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (SIMPLIFIED CHINESE)
(NW-A805: CH/A806: CH/A808: CH)
2-896-040-83 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (TRADITIONAL CHINESE)
(NW-A805: E, AUS, JE/A806: E, AUS, JE/
A808: E, AUS, JE)
2-896-040-93 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (KOREAN) (NW-A805: E, AUS, JE/
A806: E, AUS, JE/A808: E, AUS, JE)
3-219-939-12 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (UKRAINIAN)
(NW-A805: EE/A806: EE/A808: EE)
3-270-643-12 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (ENGLISH) (for EXCEPT NWZ-A816: US
(BestBuy))
3-270-643-22 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (FRENCH) (NWZ-A815: CND,
AEP, UK, FR, NZ, HK, SP, AUS/
A816: CND, AEP, UK, FR, NZ, HK, SP, AUS/
A818: CND, AEP, UK, FR, NZ, HK, SP, AUS)
Note: Blue color type of NWZ-A816 US model is using parts of violet color type.
50
NW-A805/A806/A808/NWZ-A815/A816/A818
Ref. No.
Part No.
Description Remark
3-270-643-32 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (GERMAN)
(NWZ-A815: CND, AEP, UK, NZ, HK, SP, AUS/
A816: CND, AEP, UK, NZ, HK, SP, AUS/
A818: CND, AEP, UK, NZ, HK, SP, AUS)
3-270-643-42 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (SPANISH)
(NWZ-A815: CND, AEP, UK, NZ, HK, SP, AUS/
A816: CND, AEP, UK, NZ, HK, SP, AUS/
A818: CND, AEP, UK, NZ, HK, SP, AUS)
3-270-643-52 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (ITALIAN)
(NWZ-A815: CND, AEP, UK, NZ, HK, SP, AUS/
A816: CND, AEP, UK, NZ, HK, SP, AUS/
A818: CND, AEP, UK, NZ, HK, SP, AUS)
3-270-643-62 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (RUSSIAN)
(NWZ-A815: EE/A816: EE/A818: EE)
Ref. No.
Part No.
Description Remark
X-2179-904-2 SOFT ASSY (BB), APPLICATION
(CD-ROM: MP3 Conversion Tool,
Windows Media Player 11,
Operation Guide (PDF file)) (for BestBuy)
X-2179-905-2 SOFT ASSY (CC), APPLICATION
(NWZ-A816: US)
(CD-ROM: MP3 Conversion Tool,
Windows Media Player 11,
Operation Guide (PDF file)) (for CircuitCity)
(NWZ-A815: US/A816: US)
X-2179-906-2 SOFT ASSY, APPLICATION
(CD-ROM: MP3 Conversion Tool,
Windows Media Player 11,
Operation Guide (PDF file))
(NWZ-A815: CND, AEP, UK, FR, EE, NZ, HK, SP,
AUS/A816: CND, AEP, UK, FR, EE, NZ, HK, SP,
AUS/A818: CND, AEP, UK, FR, EE, NZ, HK, SP,
AUS)
3-270-643-72 MANUAL (QSG), INSTRUCTION
(Quick Start Guide) (UKRAINIAN)
(NWZ-A815: EE/A816: EE/A818: EE)
3-272-845-11 PIECE (S), EAR (Earbud) (Size S) (GRAY)
(for White Headphones)
3-272-845-21 PIECE (S), EAR (Earbud) (Size S)
(CLEAR BLACK) (for Black Headphones)
3-272-846-11 PIECE (M), EAR (Earbud) (Size M) (GRAY)
(for White Headphones)
3-272-846-21 PIECE (M), EAR (Earbud) (Size M)
(CLEAR BLACK) (for Black Headphones)
3-272-847-11 PIECE (L), EAR (Earbud) (Size L) (GRAY)
(for White Headphones)
3-272-847-21 PIECE (L), EAR (Earbud) (Size L)
(CLEAR BLACK) (for Black Headphones)
3-293-628-11 MANUAL (QSG), INSTRUCTION (Quick Start
Guide) (ENGLISH) (for BestBuy)
(NWZ-A816: US)
8-912-759-90 RECEIVER (MDR-EX082/BC9 SET) (BLACK)
(Headphones) (including Earbuds: size S/M/L)
(for BLACK, SILVER, VIOLET, BLUE of Except US model)
8-912-759-92 RECEIVER (MDR-EX082SPW9 SET) (WHITE)
(Headphones) (including Earbuds: size S/M/L)
(for WHITE, PINK of Except US model)
8-912-765-90 RECEIVER (MDR-EX082SBQ9 SET) (BLACK)
(Headphones) (including Earbuds: size S/M/L)
(for BLACK, SILVER, VIOLET, BLUE of US model)
8-912-766-90 RECEIVER (MDR-EX082SWQ9 SET) (WHITE)
(Headphones) (including Earbuds: size S/M/L)
(for WHITE, PINK of US model)
X-2178-385-2 CD-ROM ASSY (RUSSIA HELP)
(for SonicStage, Image Converter of Russsian Help)
(NW-A805: EE/A806: EE/A808: EE)
X-2178-869-5 SOFT ASSY, APPLICATION
(CD-ROM: SonicStage software,
Image Converter software,
Oparation Guide (PDF file))
(NW-A805/A806/A808)
X-2179-903-2 SOFT ASSY, APPLICATION
(CD-ROM: MP3 Conversion Tool,
Windows Media Player 11,
Operation Guide (PDF file))
(NWZ-A815: US/A816: US/A818: US)
Note: Blue color type of NWZ-A816 US model is using parts of violet color type.
51
NW-A805/A806/A808/NWZ-A815/A816/A818
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
1.0
Date
2007.04
2007.06
2007.09
2007.11
2007.12
New
Description of Revision
Addition of black color type to E, Australian and Tourist models
(NW-A806)
Change of Part No. for Ref. No. R507 and R608 on the MAIN board
(ECN-ECC31728/SPM-07050)
Addition of NWZ-A815/A816/A818
Addition of blue color type to US model (NWZ-A816)
(ENG-07007)
Addition of US model for BestBuy (NWZ-A816)
Addition of white color type to US model for BestBuy (NWZ-A816)
Change of Part No. for Ref. No. 209 on EXPLOEDE VIEWS
(NWZ-A815/A816/A818)
Addition of Ref. No. 210 on EXPLODED VIEWS
(NWZ-A815/A816/A818)
Change of Part No. for Application soft assy on ACCESSORIES
(for NWZ-A815/A816/A818) (Canadian, AEP, UK, French,
East European, New Zealand, Hong Kong, Singapore and Australian models)
Change of Instruction manual (QSG) for US model (BestBuy)
(NWZ-A815/A816/A818)
Change of Headphones for US model (NWZ-A815/A816/A818)
(ECN-ECC54296/ECC57375/ECC58297/ECC59055)
2
Advertisement