Vaillant | climaVAIR V 7-035NW | Specifications | Vaillant climaVAIR V 7-035NW Specifications

Vaillant climaVAIR V 7-035NW Specifications
Heat pump range
Why Vaillant?
Because we are a great source of heat pump solutions.
geoTHERM
geoTHERM air
climaVAIR
Your future energy supply
starts at home
Renewable energy
When it comes to creating the perfect living environment, Vaillant has it all
under control. For more than 135 years, we have been setting the standards
in the heating market, developing products that have revolutionised the
industry. Today we are one of the world’s leading heating and renewable
technology manufacturers with an enviable reputation for performance,
efficiency, quality and reliability.
Heat pumps
Our range of heat pumps is suitable for a wide range of applications in new
build properties and refurbishments. The pumps have high energy efficiency
ratings and utilise minimal ozone depleting potential (ODP) refrigerants.
Due to their high energy efficiency, they are more environmentally friendly
than most conventional heating systems.
Why a heat pump?
Heating emissions account for almost 30% of all carbon emissions. Heat
pumps are proven to reduce these emissions by an average of 50% compared
to fossil fuel boilers or traditional electrical heating. Installing a Vaillant heat
pump can therefore help to save the environment by reducing your carbon
footprint, and at the same time will give you savings on your fuel bills.
Contents
The cost of heating your home
How the Vaillant heat pumps work
Choosing your system
geoTHERM - ground source heat pumps
geoTHERM air - air to water heat pumps
climaVAIR - air to air heat pumps
Customer service support and contact details
Customer training
4
5
6
8 - 17
18 - 23
24 - 37
38
40
2/3
Heat pumps
How the Vaillant
The cost of
heating your home
Amazingly, domestic heating generates almost a third
of all the carbon emissions for the UK. Whether you’re
concerned for the environment or just the cost of your
fuel bills as energy prices soar, a sustainable heating
solution such as a heat pump offers benefits for all.
£
1800
heat pumps work
Heat pumps can help reduce your carbon footprint by
lowering your home’s fuel consumption for heating
and hot water. This largely depends on the fuel you’re
replacing but energy efficient solutions, such as Vaillant’s
heat pump range, provide a great way of reducing energy
consumption while still fulfilling the heating and hot water
requirements for a modern home.
The monetary cost
1600
1400
1200
1000
Ground source heat pump
800
600
400
200
0
Ground Source Heat
Pumps (GSHP)
Air to Air
Heat Pumps
(A2AHP)
Air to Water Heat
Pumps (AWHP)
Bio-mass
Oil
LPG
Electricity
Calculations based on a 120m2 house built between 1990-2000 with an annual usage of 14900kW
Air to water heat pump
Air to air heat pump
Heat pumps use energy stored in the air or ground and
convert this to heat for space heating and hot water
Benefits of heat pump technology
Efficient use of energy – for every 1kW of electricity
production*. Low temperature energy from the air or
ground is passed through a CFC-free refrigerant cycle,
which converts this energy to higher temperatures for
use inside the home.
used to operate the heat pump provides up to 4kW
of heat to the property
Provides space heating and hot water*
Proven, reliable technology, from experienced
heating manufacturer
Tonnes
9
The heat pump cycle:
1. Heat withdrawn from the air or ground is transferred
to the refrigerant. The refrigerant absorbs the heat
and changes from a liquid to a gas.
Estimated annual C02 emissions
8
7
2. The gaseous refrigerant is then passed through a
compressor. As the gaseous refrigerant is compressed,
its temperature increases further.
6
5
4
3
2
1
0
2
3. The heat from the refrigerant is now directly
transferred to the heating circuit. The refrigerant
is cooled down and returns to a liquid form.
Ground Source Heat
Pumps (GSHP)
Air to Air
Heat Pumps
(A2AHP)
Air to Water Heat
Pumps (AWHP)
Bio-mass
Oil
Calculations based on a 120m2 house built between 1990-2000 with an annual usage of 14900kW
LPG
Electricity
4. In the expansion valve, the refrigerant is then
decompressed and cools down further so that
it will be able to re-absorb heat from either the
air or the ground.
*Air to air provides space heating only
Compressor
Evaporator
1
Fan
3
Condensor
Heating
system
Expansion
valve
4
The heat pump cycle
4/5
Heat pumps
Choosing your system
geoTHERM
geoTHERM air
Air to air
When selecting a sustainable heating solution like a heat
pump, every effort should be made to improve the energy
Ground Source Heat Pumps (GSHP)
An excellent choice for most properties, especially off the
Air to Water Heat Pumps (AWHP)
A good choice for those on the gas network. This type of
Air to Air Heat Pumps (A2AHP)
Cost-effective system for a wide range of applications.
efficiency of the property. This will decrease the heat loss
and greatly increase the efficiency of the building; saving
gas network. This type of heat pump provides exceptional
all year round performance. However, a survey is required
This range of heat pumps can provide all year round space
heating solution controlled on a room to room basis.
you money in the long term.
before installation to ensure the ground in the area is
suitable for the heat pump.
heat pump collects its energy from the air outside and
converts it to useable heat, providing your home with
heating and hot water.
Before installing your heat pump, you must complete a full
and robust heat loss calculation on the property to get a
full understanding of the heating requirements. Once the
heat loss calculation has been completed you will be able
to select the correct size and type of heat pump required.
Vaillant recommends that you select your heat pump
based on heat loss calculations to ensure you get
maximum comfort and efficiency from your system.
Your Vaillant installer will be able to help you to fully
understand your heating requirements.
Very high efficiency as the energy is coming from
a stable temperature source
Home owners may be eligible for future Government
funding providing the heat pump is installed by an
MCS accredited installer
Free from increasing gas, oil and LPG costs
Perfect for use with under floor heating and suitable
for use with correctly sized radiators
Extra bullet point
Extra bullet point
Excellent for multi-dwelling builds such as apartments
No large land space required for a wide range
of applications
Space saving - no radiators or under floor plumbing
required
Low capital cost (compared to GSHP)
Can be a stand alone system or integrated with
existing heating system
Free from increasing gas, oil and LPG costs
when heating your home*
No extra space required to store fuel
Perfect for use with under floor heating and
suitable for use with correctly sized radiators
Easy to use room control
F-Gas qualifications required to install
Space heating only
*When using heat pump only
6/7
Ground source heat pumps
Ground source heat pump technology
Taking energy from the ground
The Vaillant geoTHERM heat pump extracts energy
from the ground by using a vertical or horizontal
ground loop collector.
Ground collector
A series of plastic pipes are laid horizontally in the
ground to form a horizontal ground loop collector.
The pipes will be buried to a depth of 1.2m and the
amount of pipework required depends on the heat
requirement from the property and the type of ground.
Bore hole collector
The space saving ground loop collector is inserted
vertically in the ground. Vaillant have developed links
with a number of drilling partners and will assist in
the search for the right partner for the installation.
The depth and quantity of bore holes required will be
determined by the geological survey. A bore hole may
be as deep as 100m and multiple bore holes may be
A detailed geological survey will be required to ascertain
the size of the ground loop collector for either vertical
or horizontal systems.
required.
Bore hole collector
Heat pump type
Heat output
Electrical supply
geoTHERM exclusive
geoTHERM
Ground collector
1-family house
2-family house
Multi-dwelling
6-8-10kW
14-17kW
22-46kW
230V
415V
415V
•
•
•
•
Cylinder
Cooling
•
•
•
*
*Optional external accessory required
Left to right: geoTHERM exclusive, geoTHERM and geoTHERM for larger properties
10
*When commissioned by a Vaillant service engineer or approved agent
8/9
Ground source heat pumps
The perfect climate all year round
geoTHERM
Innovation in detail
The geoTHERM range of ground source heat pumps
provides maximum comfort and efficiency, combined
with simple installation, smooth operation and advanced
diagnostics which have become synonymous with the
Vaillant brand.
A high-efficiency evaporator with an injection system
significantly boosts the heat transfer process within the
ground source heat pump, increasing the efficiency of
the system.
Sensor-controlled refrigerant circuit
Throughout the geoTHERM range the process of heat
generation is controlled and monitored by advanced
sensors. Continuous pressure measurement in the
refrigerant circuit, the heating system and the ground
loop collector in combination with an anti-freeze function
provides optimal comfort. Using the sensor control the
refrigerant circuit can be monitored as required without
any special measuring equipment.
geoTHERM exclusive
Vaillant geoTHERM heat pumps at a glance:
6.0/8.1/10.5kW* (230V) output models available
13.8/17.3kW* (415V) output models available
Maximum flow temperature 62°C
Weather-compensated energy-balance control
with graphic display of the environmental yield
Multi-stage Sound Insulation (MSI) offers ‘whisper
quiet’ operation
Modern and durable heat pump scroll compressor
with 10 year guarantee
4kW auxiliary back-up heater for 230V models
6kW auxiliary back-up heater for 415V models
Intelligent Service communication system provides
remote monitoring for added peace of mind
Free commissioning
3 year guarantee when commissioned by a Vaillant
service engineer**
*B0W35 UT 5K according to EN 14511
**2 year guarantee as standard
geoTHERM exclusive offers a complete solution to your
home comfort providing heat in the winter, cooling in
the summer and domestic hot water throughout the
year, all from a single unit.
geoTHERM exclusive is equipped with a weather
compensation and energy balancing control unit which
incorporates an additional passive cooling function,
a 175 litre stainless steel domestic hot water cylinder
and a 4kW auxiliary back-up heater.
Cooling via the under floor heating system
geoTHERM exclusive includes an integrated passive
cooling function when used with an under floor heating
system. During the summer months the heat recovery
process can be reversed. The excess heat in the living
space is withdrawn via the under floor heating system
and then transferred to the ground, by-passing the
compressor. So, instead of withdrawing thermal energy
from the ground, as in the case with heating operation,
the heat is withdrawn from the living space and
transferred to the ground via the ground loop collector.
Vaillant geoTHERM exclusive:
6.0/8.1/10.5kW* (230V) output models available
Maximum flow temperature 62°C
Integrated 175L stainless steel unvented DHW cylinder
4kW auxiliary back-up heater
Weather-compensated energy-balance control
with graphic display of the environmental yield
Multi-stage Sound Insulation (MSI) offers ‘whisper
quiet’ operation
Modern and durable heat pump scroll compressor
with 10 year guarantee
Intelligent Service communication system provides
remote monitoring for added peace of mind
Passive cooling function
Free commissioning
3 year guarantee when commissioned by a Vaillant
service engineer**
*B0W35 UT 5K according to EN 14511
**2 year guarantee as standard
Environmentally friendly refrigerant
Vaillant heat pumps use CFC-free refrigerant R407C
which enhances the individual applications of the ground
source heat pump. R407C is environment friendly. The
use of refrigerant R407C also allows the ground source
heat pump to generate at temperatures of up to 62°C
maximising efficiency and operational performance.
Multi-stage Sound Insulation (MSI)
The unique MSI system ensures the ground source heat
pump operates extremely quietly. The low noise level of
the ground source heat pump is achieved thanks to two
elements: the sound-insulated framing module and the
vibration-absorbing base plate. In addition, the flexible
pipework connection guarantees high performance and
quiet operation.
geoTHERM comfort
geoTHERM is the perfect solution for heating your
home. geoTHERM can be connected to a suitable high
performance hot water cylinder for domestic hot water
and to an under floor heating or radiator system for
space heating.
Vaillant geoTHERM
geoTHERM exclusive with underfloor heating
geoTHERM exclusive with passive underfloor cooling
10 / 11
Ground source heat pumps
A geoTHERM heat pump
for every application
High output applications
Heat pump technology can be used in domestic and
light commercial applications. The geoTHERM and
geoTHERM exclusive products are complemented by a
range of large output heat pumps designed for larger
homes or commercial buildings.
geoTHERM flexibility
Incorporating many of the features found on the Vaillant
geoTHERM heat pumps, the larger output products are
supplied without a heating circulation pump allowing the
installer the flexibility to design the system to suit a
larger output or cascade application.
Larger output geoTHERM heat pumps
The geoTHERM range includes a range of larger heat
pumps for larger domestic properties and light
commercial requirements.
21.6/29.9/38.3/45.9kW* (415V) output models available
Ability to cascade units for larger system requirements
Maximum flow temperature 62°C
Weather-compensated energy-balance control unit
with graphic display of the environmental yield
Multi-stage Sound Insulation (MSI) offers ‘whisper
quiet’ operation
Modern and durable heat pump scroll compressor
with 10 year guarantee
Intelligent Service communication system provides
remote monitoring for added peace of mind
Free commissioning
3 year guarantee when commissioned by a Vaillant
service engineer**
*B0W35 UT 5K according to EN 14511
**2 year guarantee as standard
geoTHERM 22kW and 30kW
10
*When commissioned by a Vaillant service engineer or approved agent
geoTHERM 22-46kW
12 / 13
Ground source heat pumps
Installation, commissioning,
geoTHERM
control and service
Technical specification
SplitMounting (geoTHERM exclusive)
The SplitMounting concept for the geoTHERM exclusive
has been designed to assist with installations in difficult
situations (e.g. steep staircases). The hot water cylinder
is designed to be easily separated from the heat pump
unit. The heat pump and the cylinder can then be
transported to the final location as two separate units.
Commissioning
Vaillant engineers will undertake a full commissioning
service on all products throughout the geoTHERM range.
Any product commissioned by a Vaillant engineer will
automatically qualify for an additional year of guarantee.
Details of how to arrange your commissioning visit are
provided with each appliance.
Ground source heat pumps
Unit
geoTHERM 10kW
geoTHERM 14kW
geoTHERM 17kW
VWS 61/2 230V
VWS 81/2 230V
VWS 101/2 230V
VWS 141/2
VWS 171/2
Height without connections
mm 1200
1200
1200
1200
1200
Width
mm 600
600
600
600
600
Depth without/with column
mm 650/840
650/840
650/840
650/840
650/840
161/146
164/149
182/174
189/174
1/N/PE
1/N/PE
1/N/PE
3/N/PE
3/N/PE
230V 50Hz
230V 50Hz
230V 50Hz
400V 50Hz
400V 50Hz
1/N/PE
1/N/PE
1/N/PE
1/N/PE
1/N/PE
230V 50Hz
230V 50Hz
230V 50Hz
230V 50Hz
230V 50Hz
Weight with/without packaging
kg 154/139
Electric connection
Compressor and auxiliary back-up heater
Control
geoTHERM exclusive with Split Mounting concept
Slow-blow fuse
A 16/20
25/25
25/25
3x25
3x25
Inrush current without limiter
A -
-
-
64
74
Inrush current with limiter
A <45
<45
<45
<25
<25
- max. at B20W60
kW 2.8
4.0
4.9
6.8
7.7
Auxiliary back-up heater
kW 2/4
2/4
2/4
2/4/6
2/4/6
IP 20
IP 20
IP 20
IP 20
ethylene
glycol 30%
3
ethylene
glycol 30%
3
ethylene
glycol 30%
3
ethylene
glycol 30%
3
-10
Electric power consumption
System of protection EN 60529
IP 20
Ground loop collector
Brine type
Max. operating pressure
ethylene
glycol 30%
bar 3
Min. inlet temperature
°C -10
-10
-10
-10
Max. inlet temperature
°C 20
20
20
20
20
Rated volume flow UT 3K
l/h 1453
1936
2530
3334
3939
mbar 381
332
263
252
277
W 132
132
132
205
210
Residual pump head UT 3K
Electric power consumption of the pump
Heating circuit
Max. operating pressure bar
Intelligent Service communication system
3
3
3
3
Min. flow temperature
°C 25
25
25
25
25
Max. flow temperature
°C 62
62
62
62
62
Rated volume flow UT 10K
l/h 517
697
848
1187
1538
468
450
551
603
93
93
132
205
Residual pump head UT 10K
Electric power consumption of the pump
bar 3
mbar 486
W 93
Refrigerant circuit
the home owner to make arrangements for engineers to
visit, if the problem cannot be resolved remotely.
Refrigerant type
Quantity
Admissible operating over pressure
The Intelligent Service communication system also allows
Compressor type/oil
the heat pump to be monitored remotely and the user
advised of changes to the system which could further
Inside acoustic power
improve the efficiency.
*GSM module offered as standard. Vaillant reserves the right to offer
an alternative when GSM signal is weak.
geoTHERM 8kW
Dimensions
Weather-compensated energy-balance control
A unique energy-balance control is incorporated within
the geoTHERM heat pump. The energy-balance control
constantly measures outside temperature, temperature
required inside the building and the system temperature
to ensure the heat pump operates in the most efficient
way possible.
Intelligent Service*
All geoTHERM heat pumps benefit from Vaillant’s unique
Intelligent Service package. Through Vaillant’s
Intelligent Service communication system, data is
transmitted between the ground source heat pump and
a dedicated service team allowing remote monitoring of
the system. In the unlikely event of a fault occurring the
communications system sends the Vaillant service team
a message via email providing details of the fault. Should
this occur the service team will automatically contact
geoTHERM 6kW
WWW
vrnetDIALOG
Performance data
Heating output
(B0W35 UT 5K acc. to EN 14511)
Electrical power consumption
CoP (Coefficient of Performance)
Heating output
(B0W55 UT 5K acc. to EN14511 )
Electrical power consumption
CoP (Coefficient of Performance)
R407C
R407C
R407C
R407C
kg 1.9
R407C
2.2
2.05
2.9
3.05
bar 29
29
29
29
29
Scroll/Ester
Scroll/Ester
Scroll/Ester
Scroll/Ester
dBA 49
51
53
52
53
kW 6.0
8.1
10.5
13.8
17.3
kW 1.4
1.9
2.5
3.2
4.1
4.2
4.2
4.2
4.3
4.3
kW 5.5
7.5
9.4
13.6
16.1
kW 2.1
2.8
3.4
4.6
5.6
2.7
2.8
2.9
2.9
Scroll/Ester
2.6
14 / 15
Ground source heat pumps
Ground source heat pumps
Ground source heat pumps
Unit
geoTHERM exclusive 6kW
geoTHERM exclusive 8kW geoTHERM exclusive 10kW
VWS 63/2 230V
VWS 83/2 230V
Unit
VWS 103/2 230V
geoTHERM 22kW
geoTHERM 30kW
geoTHERM 38kW
geoTHERM 46kW
VWS 220/2
VWS 300/2
VWS 380/2
VWS 460/2
Dimensions
Dimensions
Height without connections
mm 1800
1800
1800
Height without connections
mm 1200
1200
1200
1200
Width
mm 600
600
600
Width
mm 760
760
760
760
Depth without/with column
mm 650/840
650/840
650/840
Depth without/with column
mm 900/1100
900/1100
900/1100
900/1100
242/227
Weight with/without packaging
kg 356/326
370/340
394/364
417/387
Electric connection
3/N/PE
3/N/PE
3/N/PE
3/N/PE
400V 50Hz
400V 50Hz
400V 50Hz
400V 50Hz
1/N/PE
1/N/PE
1/N/PE
1/N/PE
230V 50Hz
230V 50Hz
230V 50Hz
230V 50Hz
Weight with/without packaging
Electric connection
Compressor and auxiliary back-up heater
Control circuit
kg 231/216
239/224
1/N/PE 230V 50Hz
1/N/PE 230V 50Hz
1/N/PE 230V 50Hz
3/N/PE
400V 50Hz
3/N/PE
400V 50Hz
3/N/PE
400V 50Hz
1/N/PE
230V 50Hz
1/N/PE
230V 50Hz
1/N/PE
230V 50Hz
Control circuit
Compressor and auxiliary back-up heater
Slow-blow fuse
A 16/20
25/25
25/25
Slow-blow fuse
A 3x20
3x25
3x32
3x40
Inrush current without limiter
A <45
<45
<45
Inrush current with limiter
A 44
65
85
110
kW 10.0 1
12.0
16.0
18.0
IP 20
IP 20
IP 20
Electric power consumption
Electric power consumption
- max. at B20W60
kW 2.8
4.0
4.9
- max. at B20W60
- Auxiliary back-up heater
kW 2/4
2/4
2/4
System of protection EN 60529
IP 20
IP 20
Ground loop collector
175
175
Max. operating pressure
3
3
3
10
Min. inlet temperature
°C -10
-10
-10
-10
55
Max. inlet temperature
°C 20
20
20
20
Rated volume flow UT 3K
l/h 4858
6660
8640
9840
mbar 324
275
431
379
W 390
390
585
585
System of protection EN 60529
IP 20
Brine type
Integrated hot water cylinder
Capacity
Max. operating pressure
Max. temperature with heat pump
Max. temperature with heat pump
and auxiliary back-up heater
Ground loop collector
Brine type
Max. operating pressure
I 175
bar 10
°C 55
°C 75
ethylene glycol 30%
55
75
ethylene glycol 30%
75
Residual pump head UT 3K
Electric power consumption of the pump
ethylene glycol 30%
Heating circuit
ethylene glycol 30% ethylene glycol 30% ethylene glycol 30% ethylene glycol 30%
bar 3
3
3
Max. operating pressure
3
3
3
Min. inlet temperature
°C -10
-10
-10
Min. flow temperature
°C 25
25
25
25
Max. inlet temperature
°C 20
20
20
Max. flow temperature
°C 62
62
62
62
Rated volume flow UT 3K
l/h 1453
1936
2530
Rated volume flow UT 10K
l/h 1902
2580
3336
3900
Residual pump head UT 10K
Electric power consumption of the pump
25
40
53
-
-
-
R407C
5.99
29
R407C
6.7
29
R407C
8.6
29
Scroll/Ester
Scroll/Ester
Scroll/Ester
63
63
65
kW 21.6
29.9
38.3
45.9
kW 5.1
6.8
8.8
10.6
4.3
4.4
4.4
4.4
Residual pump head UT 3K
Electric power consumption of the pump
bar 3
10
IP 20
mbar 335
277
216
W 132
132
132
Heating circuit
Max. operating pressure
bar 3
mbar 23
W -
Refrigerant circuit
3
3
°C 25
25
25
Max. flow temperature
°C 62
62
62
Refrigerant type
Quantity
Admissible operating over pressure
Rated volume flow UT 10K
l/h 517
697
848
Compressor type/oil
460
580
Inside acoustic power
93
132
Performance data
R407C
R407C
Heating output (B0W35 UT 5K acc. to EN 14511)
Electrical power consumption
kg 1.9
2.2
2.05
CoP (Coefficient of Performance)
bar 29
29
29
kW 20.3
27.3
36.2
42.5
kW 6.9
9.3
11.8
14.1
kW 3.0
2.9
3.1
3.0
Min. flow temperature
Residual pump head UT 10K
Electric power consumption of the pump
bar 3
mbar 490
W 93
Refrigerant circuit
Refrigerant type
Quantity
Admissible operating over pressure
Compressor type/oil
Output passive cooling
Inside acoustic power
R407C
Scroll/Ester
Scroll/Ester
Heating output (B0W55 UT 5K acc. to EN 14511)
Electrical power consumption
kW 3.8
5.0
6.2
CoP (Coefficient of Performance)
dBA 48
49
50
Scroll/Ester
R407C
kg 4.1
bar 29
Scroll/Ester
dBA 63
Performance data
Heating output (B0W35 UT 5K acc. to EN 14511)
Electrical power consumption
CoP (Coefficient of Performance)
Heating output (B0W55 UT 5K acc. to EN 14511)
Electrical power consumption
CoP (Coefficient of Performance)
kW 6.0
8.1
10.5
kW 1.4
1.9
2.5
4.2
4.2
4.2
kW 5.5
7.5
9.4
kW 2.1
2.8
3.4
2.7
2.8
2.6
16 / 17
Air to water heat pumps
Air to water heat pump technology
Innovation in detail
The geoTHERM air range of heat pumps provides
maximum comfort and efficiency, combined with simple
installation, smooth operation and advanced diagnostics.
Advanced evaporation technology
A high-efficiency evaporator with an injection system
significantly boosts the heat transfer process within
the geoTHERM air, increasing the efficiency of the system.
Sensor-controlled refrigerant circuit
Throughout the geoTHERM air range, the process of
heat generation is controlled and monitored by advanced
sensors. Continuous pressure measurement in the
refrigerant circuit, heating system and collector,
in combination with an anti-freeze function, provides
optimal comfort. Using the sensor control, the refrigerant
circuit can be monitored as required without any special
measuring equipment.
Vaillant geoTHERM air at a glance:
Monobloc unit – sealed refrigerant circuit, which means
no F-Gas refrigerant handling qualification is required
for installation
High efficiency R410a zero ozone depletion
potential refrigerant
DC inverter – extra power at peak times and highly
efficient for standard operation
Intelligent compressor management – maximises total
system efficency
In-built weather compensation – permanent monitoring
of the outside temperature to adapt the heating
system output to maintain the desired temperature
Maximum flow temperature of 600C acheivable for DHW
Single phase 230v electrical connection
Vaillant Piharmonic function
Innovative fan design – to maximise air flow and
minimise noise
Environmentally friendly refrigerant
Vaillant air source heat pumps use a CFC-free refrigerant,
which enhances the individual applications of the heat
pump. The use of environment friendly refrigerant,
R410a, also allows the air source heat pump to generate
at temperatures of up to 60°C for domestic hot water,
ensuring maximum comfort.
PiharmonicTM function
The unique Piharmonic system ensures the air source
heat pump operates extremely quietly. The low noise
level of the heat pump is achieved thanks to two
elements – the sound-insulated framing module and the
vibration-absorbing base plate.
geoTHERM air comfort
geoTHERM air is the perfect solution for heating your
home. It can be connected to a suitable high performance
hot water cylinder for domestic hot water and to an
underfloor heating or radiator system for space heating.
geoTHERM air 7kW
2
5
Vaillant geoTHERM air 12 and 15kW
18 / 19
Air to water heat pumps
System sizing
Vaillant geoTHERM air control
The geoTHERM air comes complete with its own intelligent
control*. For ease of use this control can be used in two
ways for a geoTHERM air heating and hot water system:
The heat pump interface, set up, service and
diagnostic control
Or both the interface and a fully programmable
Example features of control systems:
Outside weather compensator
Programmable flow set point temperatures
Inverter driven compressor
Able to interface with W plan central heating system
room thermostat for single zone heating systems
The geoTHERM air controller is specifically designed to
ensure that space heating operates at optimum efficiency.
The controller is also designed to readily interface with W
plan valve (priority system) configurations for central
heating and hot water systems. This enables the geoTHERM
air to be used with correctly sized radiator and under floor
heating systems and our range of unvented cylinders.
In order to meet your comfort needs, you must select
the heat pump that can meet your heating requirements
when the outside air temperature drops to -5ºC. Vaillant
always recommends a full and robust heating calculation
be carried out before installing a heat pump. The
geoTHERM air gets its heating energy from the outside
air. As the temperature drops, so does the amount of
energy. This must be taken into consideration when
selecting the right heat pump for you.
Outdoor temp
-5
350 Flow
Sizing your heat pump
To ensure you get the most out of your sustainable
heating solution, such as geoTHERM air, every effort has to
be taken to make sure your property is energy efficient
to minimise your heating requirement. By investing in
this you will reduce the peak heat loss of your home
making your heating system far more efficient, saving
you money and reducing your carbon emissions.
Available power – geoTHERM air range
-3
0
2
7
-5
-3
0
2
7
*The geoTHERM air control is not compatible with any other Vaillant products or Vaillant’s range of eBus controls.
12kW
15kW
4.55
7.40
8.31
CoP
2.71
2.75
2.62
kW
4.85
7.90
9.06
CoP
2.79
2.85
2.85
kW
5.14
8.47
9.81
CoP
2.94
3.00
3.08
kW
5.41
8.72
10.20
CoP
2.99
3.11
3.20
kW
7.20
11.82
14.50
CoP
3.90
3.90
4.06
7kW
12kW
15kW
kW
4.45
6.96
7.90
CoP
2.28
2.24
2.10
kW
4.72
7.38
9.06
CoP
2.35
2.33
2.36
kW
5.11
8.03
9.80
CoP
2.42
2.42
2.48
kW
5.38
8.45
10.20
CoP
2.55
2.61
2.60
kW
7.40
11.38
14.00
CoP
3.16
3.03
3.21
Outdoor temp
-5
-3
0
2
To combat the ineffective ‘On/Off’ approach of heating
systems, our inverter driven technology means we
can offer Flow Temperature Control. Simply put, this
enables the system to vary the flow temperature of water
depending on the demand for heat so the heat pump only
works as hard as it needs to, to maintain excellent levels
of comfort whilst quickly reacting to outdoor weather
temperatures and making it hugely energy efficient.
7kW
kW
Outdoor temp
450 Flow
Getting the most from your heat pump
Vaillant’s air to water heat pumps work on a similar
principle to a refrigerator. The geoTHERM air will
self-manage the temperature of your home ensuring
your comfort. In order to gain maximum efficiencies
from your heat pump system, simply set the required
temperature and let the intelligent controls do the rest.
550 Flow
Controls
7
7kW
12kW
15kW
kW
4.24
7.06
7.60
CoP
2.02
1.92
1.80
kW
4.50
7.57
8.52
CoP
2.10
1.99
2.00
kW
4.88
8.04
9.23
CoP
2.20
2.08
2.08
kW
5.14
8.47
10.20
CoP
2.34
2.20
2.60
kW
6.71
11.04
13.90
CoP
2.68
2.50
2.82
20 / 21
Air to water heat pumps
geoTHERM air
Technical specification
VWL 75/1
VWL 125/1
VWL 155/1
Description
C
-20
-20
-20
Electrical
C
30
30
30
Supply voltage/frequency
Description
Unit
Min. operating outside temperature (in heating)
0
Max. operating outside temperature (in heating)
0
Specifications, with radiators
Fuse
(flow: 450C, return: 400C, outside dry temperature (wet) 7(6)0C
Maximum absorbed power (p max)
Unit
VWL 75/1
V/Hz
VWL 125/1
VWL 155/1
1/N/PE 230V 50Hz
15 typo D
25 typo D
25 typo D
kW
2.7
5.1
5.1
A
Heating output
kW
7.4
12.9
14
Maximum absorbed current (l max)
14
23
20
Power input
kW
2.32
4.2
4.4
Index of electrical protection
IPX4
IPX4
IPX4
Rated electrical current
A
10
18
19
Electrical classification
1
1
1
3.18
3.03
3.21
Dimensions
CoP* A7(6) W45-40
Specifications, with underfloor heating
(flow: 35 C, return: 30 C, outside dry temperature (wet) 7(6) C
0
0
0
Height
mm
821
1363
1363
Width
mm
908
908
908
Heating output
kW
7.2
11.9
14.5
Depth
mm
326
326
326
Power input
kW
1.82
3.01
3.6
Ø Water circuit connections
in
1
1
1
Rated electrical current
A
8
13
15.6
Nett total weight
kg
71
105
130
3.96
3.94
4.06
Sound power level: overall exterior noise
(according to EN 12102 and EN ISO 9614-1)
dBA
64
67
68
1.81
2.485
3.385
CoP* A7(6) W35
Refrigerant circuit
Type of refrigerant
Quantity of refrigerant
kg
Type of compressor
Rotary
Type of oil
Polyolester
Type of regulator
Electronic
Fan speed
rpm
1000
805
1050
bar
45
45
45
Pa
45 x 105
45 x 105
45 x 105
bar
3
3
3
Pa
3 x 105
3 x 105
3 x 105
bar
0.4
0.45
0.3
Pa
40 x 103
45 x 103
30 x 103
Nominal water flow rate in heating mode
l/h
1200
2100
2500
Minimum water flow rate
l/h
500
500
500
Maximum operating pressure (PS)
* Coefficient of Performance (according to EN 14511)
** Energy Efficiency Ratio (according to EN 14511)
Heat pump circuit
Maximum supply pressure
Nominal static pressure
Minimum flow temperature setting (in heating)
0
C
20
20
20
Maximum flow temperature setting (in heating)
0
C
60
60
60
Heat pump water volume
l
1.2
2.3
2.3
22 / 23
Air to air heat pump technology
Innovation in detail
The climaVAIR range of air to air heat pumps provides
maximum comfort and efficiency, combined with
simple installation, smooth operation and advanced
diagnostics which have become synonymous with the
Vaillant brand.
Vaillant climaVAIR heat pumps at a glance:
Temperature and operating mode
Fan speed
Louvre position
Timer and sleep function
Air quality settings
Plus and exclusive models available
Our heat pump systems can efficiently heat the room
during the winter and as an added benefit also provide
cooling during the summer. This means you can enjoy a
climate controlled environment all year round.
Advanced filter solutions also bring good news for allergy
sufferers with the air to air heat pump system cleaning
the air as it circulates in the room. Plus, due to its high
efficiency in heating mode, it’s more environmentally
friendly than many conventional heating systems.
All Vaillant climaVAIR air to air heat pumps are supplied
in a predefined set, which includes the indoor and
outdoor units, infra red remote control and pipe work
and fittings to allow installation of the indoor unit up
to 10m from the outdoor unit. For greater distances
additional pipework will be required.
All climaVAIR air to air heat pumps have high efficiency
ratings and utilise zero ozone depleting potential
(ODP) refrigerants.
Vaillant climaVAIR
24 / 25
V-Multi system
climaVAIR plus
V-Multi system
V-Multi system
Vaillant’s versatile climaVAIR V-Multi air to air heat
pump range is a perfect solution when there is a need
to heat or cool a number of rooms. Each outdoor unit
can connect to up to four indoor wall mount units,
providing a total heating output of 10kW.
Functions include remote setting of:
Temperature and operating mode
Fan speed
Louvres
Timer and sleep function
Air quality settings
climaVAIR plus V-Multi system
Multi inverter air to air heat pumps:
– Outdoor unit at 10kW
– 4 wall mount units from 2.38 to 2.96kW
Outdoor unit
Indoor unit
Indoor unit dimensions: climaVAIR plus V-Multi
All climaVAIR plus V-Multi air to air heat pumps have the following features:
Model (wall mount)
H (mm) L (mm)
D (mm) Kg
VAI 2-025 WNI
265
790
200
8.5
VAI 2-035 WNI
265
790
200
8.5
DC inverter technology
Technology which significantly reduces
energy and CO2 output by matching
compressor speed to heating/cooling
requirements.
Outdoor unit dimensions: climaVAIR plus V-Multi
Model
H (mm) L (mm)
D (mm) Kg
VAF 2-085 W4NO
860
330
895
Remote control
DIgital display
Colourful LCD Digital Display.
78
Sleep function
Function which adapts the ambient
temperature during sleep.
H
D
L
D
Auto operation
Automatic activation in the appropriate
mode (HEAT - COOL - DRY), by
adjusting its operation to the ambient
temperature. The user can also select
the desired airflow.
Ionizer
Negative ion generator which as well
as being beneficial for well-being and
the environment, also neutralises
odours, provides freshness and reduces
contamination.
Energy class ‘A++’
Excellent energy efficiency is achieved
thanks to an energy saving technology.
Infra-red remote control
All functions controlled by infra-red
remote control.
Freeze protection
Prevents the outdoor unit from freezing
in the winter months.
R410a
Energy efficient zero ozone depleting
potential (ODP) refrigerant.
24hr programmer
Programms the units so that they start
or stop at user defined times. Clock
and repeat function.
Sleep function
Function which adapts the ambient
temperature during sleep.
Anti-dust filter
Removes small particles of dust and
debris from the circulated air.
Auto restart function
After power cut this function ensures
the system restarts with the same
settings (as those in force prior to
power supply interruption).
Anti-germ filter
Filter with special coating to neutralise
bacteria and germs.
Low noise
Lowers the internal fan speed to provide
reduced noise levels.
Activated carbon filter
Filter with special coating to provide antiodour and sterilisation of the circulated
air to remove harmful smells and odours.
26 / 27
Wall mount multi-twin system
climaVAIR plus
Multi-twin system
Multi-twin systems
Vaillant’s climaVAIR plus multi heat pump range is perfect
when more than one area requires heating and there is
limited room for the outdoor units. The range consists
of a single energy efficient inverter model of 6.4kW.
The system consists of one outdoor unit which is
connected to two individual indoor wall mounted units.
The multi-twin system has all the features of the
climaVAIR plus wall mount mono range such as inverter
speed control compressors, high efficiency non-ozone
depleting R410a refrigerant, three stage filtration, remote
setting of horizontal and vertical louvres. Simple to use
multi-function infra red remote control provides remote
setting of:
Temperature and operating mode
Fan speed
Louvre position
Timer and sleep function
Air quality settings
climaVAIR plus multi-twin split system
Mono inverter air to air heat pumps:
One outdoor unit with a heat output of 6.25kW
Two indoor units with heat outputs of 2.8kW and 3.4kW
Outdoor unit
Indoor units
Remote controls
All climaVAIR plus multi-twin air to air heat pumps have the following features:
Indoor unit dimensions: climaVAIR plus multi-twin
Model
H (mm) L (mm)
D (mm) Kg
VAI 2-025 WNI
265
790
200
8.5
VAI 2-035 WNI
265
790
200
8.5
DC inverter technology
Technology which significantly reduces
energy and CO2 output by matching
compressor speed to heating/cooling
requirements.
DIgital display
Colourful LCD Digital Display.
Outdoor unit dimensions: climaVAIR plus multi-twin
Model
H (mm) L (mm)
D (mm) Kg
VAM 2-060 W2NO
695
315
845
Sleep function
Function which adapts the ambient
temperature during sleep.
60.0
H
D
L
D
Auto operation
Automatic activation in the appropriate
mode (HEAT - COOL - DRY), by
adjusting its operation to the ambient
temperature. The user can also select
the desired airflow.
Ionizer
Negative ion generator which as well
as being beneficial for well-being and
the environment, also neutralises
odours, provides freshness and reduces
contamination.
Energy class ‘A++’
Excellent energy efficiency is achieved
thanks to an energy saving technology.
Infra-red remote control
All functions controlled by infra-red
remote control.
Freeze protection
Prevents the outdoor unit from freezing
in the winter months.
R410a
Energy efficient zero ozone depleting
potential (ODP) refrigerant.
24hr programmer
Programms the units so that they start
or stop at user defined times. Clock
and repeat function.
Sleep function
Function which adapts the ambient
temperature during sleep.
Anti-dust filter
Removes small particles of dust and
debris from the circulated air.
Auto restart function
After power cut this function ensures
the system restarts with the same
settings (as those in force prior to
power supply interruption).
Anti-germ filter
Filter with special coating to neutralise
bacteria and germs.
Low noise
Lowers the internal fan speed to provide
reduced noise levels.
Activated carbon filter
Filter with special coating to provide antiodour and sterilisation of the circulated
air to remove harmful smells and odours.
28 / 29
Wall mount mono split system
climaVAIR plus
Wall mount mono split system
High wall mono split systems
Vaillant’s climaVAIR plus heat pump range is designed
to complement any indoor décor. The range consists of
4 energy efficient inverter models ranging from 2.9kW
to 7.35kW. These feature packed units provide three stage
filtration, de-ioniser and remotely controlled air louvres
to afford the user a constant stream of filtered air.
Simple to use multi-function infra red remote control
is standard across the range. Features include remote
setting of:
Temperature and operating mode
Fan speed
Louvre position
Timer and sleep function
Air quality settings
climaVAIR plus high wall mono split system models
Mono inverter air to air heat pumps:
A range of four models with heat outputs from
2.9kW to 7.35kW
Outdoor unit
Indoor unit
Indoor unit dimensions: climaVAIR plus
Remote control
All climaVAIR plus air to air heat pumps have the following features:
Model
H (mm) L (mm)
D (mm) Kg
VAI 2 – 025 WNI
265
790
200
8.5
VAI 2 – 035 WNI
265
790
200
8.5
VAI 2 – 050 WNI
295
920
225
11.5
VAI 2 – 065 WNI
325
1,000
235
16.5
DC inverter technology
Technology which significantly reduces
energy and CO2 output by matching
compressor speed to heating/cooling
requirements.
DIgital display
Colourful LCD Digital Display.
Energy class ‘A++’
Excellent energy efficiency is achieved
thanks to an energy saving technology.
Infra-red remote control
All functions controlled by infra-red
remote control.
Freeze protection
Prevents the outdoor unit from freezing
in the winter months.
R410a
Energy efficient zero ozone depleting
potential (ODP) refrigerant.
Outdoor unit dimensions: climaVAIR plus
Model
H (mm) L (mm)
D (mm) Kg
VAI 2 – 025 WNO
600
760
285
38.0
VAI 2 – 035 WNO
600
760
285
38.0
VAI 2 – 050 WNO
600
760
285
39.5
VAI 2 – 065 WNO
695
845
315
52.0
Sleep function
Function which adapts the ambient
temperature during sleep.
H
D
L
D
Auto operation
Automatic activation in the appropriate
mode (HEAT - COOL - DRY), by
adjusting its operation to the ambient
temperature. The user can also select
the desired airflow.
Ionizer
Negative ion generator which as well
as being beneficial for well-being and
the environment, also neutralises
odours, provides freshness and reduces
contamination.
24hr programmer
Programms the units so that they start
or stop at user defined times. Clock
and repeat function.
Sleep function
Function which adapts the ambient
temperature during sleep.
Anti-dust filter
Removes small particles of dust and
debris from the circulated air.
Auto restart function
After power cut this function ensures
the system restarts with the same
settings (as those in force prior to
power supply interruption).
Anti-germ filter
Filter with special coating to neutralise
bacteria and germs.
Low noise
Lowers the internal fan speed to provide
reduced noise levels.
Activated carbon filter
Filter with special coating to provide antiodour and sterilisation of the circulated
air to remove harmful smells and odours.
30 / 31
climaVAIR exclusive high wall mount mono split system
climaVAIR exclusive
High wall mount mono split system
High wall mount mono split system
Vaillant’s climaVAIR exclusive air conditioning units are a
feature packed range for the ultimate in domestic cooling
or heating comfort.
The range consists of 2 energy efficient inverter models
with cooling outputs of 2.64kW and 3.52kW.
As well as the three stage filtration and de-ionisation as
standard, the exclusive range further enhances the air
quality with an ultra violet bacteria reducing module.
climaVAIR exclusive’s modern thin 165mm flat-fronted
design with its unique concealed vent operation offers
the perfect solution for homes, offices and shops.
Simple to use multi-function infra red remote control is
standard across the range and offers remote setting of:
Temperature and operating mode
Fan speed
Louvre position
Timer and sleep function
Air quality settings
Outdoor unit
Indoor unit
climaVAIR exclusive has a bright white digital display
which provides useful information for the user such
as timer, operation mode, set temperature, turbo, sleep
and ionizer functions. The display can also be turned
off if desired.
Indoor unit dimensions: climaVAIR exclusive
All climaVAIR exclusive air conditioning systems have the following features:
4 modes
Heating, cooling, fan and dry mode.
Auto operation
Automatic activation in the appropriate
mode (HEAT - COOL - DRY), by
adjusting its operation to the ambient
temperature. The user can also select
the desired airflow.
H
Model
H (mm) L (mm)
D (mm) Kg
VAI 1-025 WNI
290
905
165
10
VAI 1-035 WNI
290
905
165
10
H
L
D
L
D
Ionizer
Negative ion generator which as well
as being beneficial for well-being and
the environment, also neutralises
odours, provides freshness and reduces
contamination.
Infra-red remote control
All functions controlled by infra-red
remote control. Includes “Follow Me”
function.
Outdoor unit dimensions: climaVAIR exclusive
Model
H (mm) L (mm)
D (mm) Kg
VAI 1-025 WNO
590
760
285
38
VAI 1-035 WNO
590
760
285
39
Remote control
Hot start function
Only starts the internal fan when the
heating coil is hot to prevent cool air
discharge.
H
H
D
L
D
L
D
D
Fresh air option
Fresh air introduction feature. Transfers
the fresh air from the outside to inside
via an in-built heat exchanger for
maximum efficiency.
Auto restart function
After power cut this function ensures
the system restarts with the same
settings (as those in force prior to
power supply interruption).
Silent operation
Lowers the internal fan speed to provide
reduced noise levels.
Turbo
Increases the heat pump speed when
faster room heating/cooling is required.
Horizontal air swing
Enables the air direction to be adjusted
horizontally for improved distribution.
Vertical air swing
Enables the air direction to be adjusted
vertically for improved distribution.
Sleep function
Function which adapts the ambient
temperature during sleep.
24hr programmer
Programms the units so that they start
or stop at user defined times. Includes
repeat function.
Outdoor valve protector
Protects the valves on the outdoor unit
from exposure to the elements.
Anti-rust outdoor
Outdoor unit made of galvanised steel
and anti-rust materials. Even resistant in
environments with high saline content.
DC inverter technology
Technology which significantly reduces
energy and CO2 output by matching
compressor speed to heating/cooling
requirements
R410a
Energy efficient zero ozone depleting
potential (ODP) refrigerant.
Twin rotary
Twin rotating cylinders provide improved
efficiency and reduced vibration in
comparison with single types.
Anti-dust filter
Removes small particles of dust and
debris from the circulated air.
Anti-germ filter
Filter with special coating to neutralise
bacteria and germs.
Energy class ‘A’
Many unit combinations achieve ‘A’ rated
energy efficiency.
Activated carbon filter
Filter with special coating to provide antiodour and sterilisation of the circulated
air to remove harmful smells and odours.
Defrost
Prevents the outdoor unit from freezing
in the winter months.
Ultra-violet
Lamp emitting UV-C rays which kill
micro-organisms and mould spores.
32 / 33
Technical specification
climaVAIR plus V-Multi system
climaVAIR plus Multi-twin system
Technical specification
Technical specification
climaVAIR plus V-Multi system
System reference
Indoor units
Outdoor unit
VAM 2-060 W2N (2 Indoor)
VAM 2-110 W4N (4 Indoor)
2 off VAI 2-025WNI
3 off VAI 2-025WNI
1 off VAI 2-035WNI
1 off VAI 2-035WNI
VAF 2-110 W4NO
VAF 2-110 W4NO
Outdoor unit
1 off VAI 2-035 WNI
VAF 2-060 W2NO
kW 9.05
10.10
Heating capacity
kW
6.25
(Min-max)
kW 3.8 - 10.95
4.13 - 12.30
(Min-max)
kW
2.64 - 7.60
Cooling capacity
kW 8.10
9.10
Cooling capacity
kW
5.40
(Min-max)
kW 3.40 - 9.80
3.73 - 11.09
(Min-max)
kW
2.27 - 6.53
Power input (heating/cooling)
kW 2.17/2.48
2.42/2.78
Power input heating/cooling
kw
1.73/1.66
10.80/10.80
12.10/12.10
Operating current heating/cooling
EER/CoP
3.27/3.63
3.27/3.63
EER/CoP
Energy level class
A
A
Energy level class
1.39
Annual consumption1
VAI 2-025 WNI
VAI 2-035 WNI
Indoor unit
250/300/500
310/450/580
Air flow volume
Infra-red
Infra-red
Remote control type
26/38
28/40
Sound pressure level (min-max)2
265 x 790 x 200
265 x 790 x 200
Dimensions HxLxD
8.5
8.5
Net weight
Annual consumption 1
A
kW 1.24
Indoor Unit
Air flow volume
m /h
3
Remote control type
Sound pressure level (min-max)2
Dimensions HxLxD
Net weight
dB(A)
mm
Kg
VAF 2-110 W4NO
VAF 2-110 W4NO
Outdoor unit
2800/3500
2800/3500
Air flow volume
55/57
55/57
Sound pressure level (min-max)3
R410a
R410a
Refrigerant
2,400
2400
Refrigerant charge heat pump
Inverter DC/AC
Inverter DC
Inverter DC
Inverter DC/AC
Expansion System
EXV + Capillary
EXV + Capillary
Expansion system
860 x 895 x 330
860 x 895 x 330
Dimensions HxLxD
78
78
Net weight
230/1/50
230/1/50
Power supply
Outdoor
Outdoor
Supply to:
Outdoor Unit
Air flow volume
Sound pressure level (min-max)3
m3/h
dB(A)
Refrigerant
Refrigerant charge heat pump
Dimensions HxLxD
Net weight
gr
mm
Kg
Installation
Power supply
A 7.50/7.20
3.25/3.61
A
kWh
830
VAI 2-025 WNI
m /h 250/300/500
3
dB(A)
mm
VAI 2-035 WNI
310/450/580
Infra-red
Infra-red
26/38
28/40
265x790x200
Kg 8.5
265x790x200
8.5
VAM 2-060 W2N
m3/h 1800/2500
dB(A)
52
R410a
gr
1,450
Inverter DC
EXV + Capiliary
mm
695x845x315
Kg 60
Installation
V/Ph/Hz
Supply to:
V/Ph/Hz 230/1/50
Outdoor
Pipe connection liquid/gas
in
1/4" - 3/8"
1/4" - 3/8"
Pipe connection liquid/gas
in 1/4 - 3/8
Max. piping length
m
60
60
Max. piping length
m 30
Max. height differential indoor to outdoor
m
10
10
Max. height differential indoor to outdoor
m 10
Chargeless length
m
7.5
7.5
Chargeless length
m 7.5
Additional charge per metre
gr
15
15
Additional charge per metre
gr
Based on 500 hours operating at maximum load.
Sound pressure level IU: directivity 3 dB(A), 0.8m in height and 1.0m in distance.
3
Sound pressure level OU: directivity 3 dB(A), distance 1.0m, height is at centre of outdoor fan.
2
1 off VAI 2-025 WNI
Indoor units
Heating capacity
Operating current (heating/cooling)
1
climaVAIR plus multi twin system
System reference
VAM 2-085 W3N (3 Indoor)
1
2
3
15
Based on 500 hours operating at maximum load
Sound pressure level IU: directivity 3 dB(A), 0.8m in height and 1.0m in distance.
Sound pressure level OU: directivity 3 dB(A), distance 1.0m, height is at centre of outdoor fan.
34 / 35
Technical specification
climaVAIR plus high wall mount mono split system
climaVAIR exclusive high wall mount mono split system
Technical specification
Technical specification
climaVAIR plus high wall mono split system
System reference
climaVAIR exclusive high wall mono split system
VAI 2-025 WN
VAI 2-035 WN
VAI 2-050 WN
VAI 2-065 WN
System reference
VAI 1-025 WN
VAI 1-035 WN
Heating capacity
kW
2.90
3.80
5.10
7.30
Heating capacity
kW 2.93
3.81
(Min-max)
kW
1.0 - 3.6
1.2 - 4.4
1.6 - 6.7
3.2 - 7.9
(Min-max)
kW
0.97-3.66
1.17-4.54
Cooling capacity
kW
2.60
3.50
5.00
6.70
Cooling capacity
kW
2.64
3.52
(Min-max)
kW
0.9 - 3.3
1.1 - 3.4
1.5 - 6.4
3.5 - 7.3
(Min-max)
kW
0.91-3.37
1.13-4.37
Power input heating/cooling
kW
0.65
0.97
1.55
2.09
Power input (heating/cooling)
kW
0.69/0.63
0.95/0.88
2.90/3.00
4.30/4.20
6.90/6.40
9.40/9.10
Operating current (heating/cooling)
3.50 / 3.20
4.30/4.00
EER/CoP
4.00/4.26
3.61/3.84
3.23/3.62
3.21/3.26
Energy level class
A
A
A
A
EER / CoP
4.20/4.25
4.00/4.00
485
775
1045
Energy level class
A/A
A/A
VAI 2-025 WNI
VAI 2-035 WNI
VAI 2-050 WNI
VAI 2-065 WNI
314
440
250/300/500
310/450/580
570/800/850
820/980/1080
Operating current heating/cooling
Annual consumption1
A
kWh 325
Indoor unit
Air flow volume high/med/low
m3/h
Remote control
Sound pressure level (min-max)2
Dimensions HxLxD
dB(A)
mm
Weight
Kg
Outdoor unit
m /h
Air flow volume
3
Sound pressure level
3
dB(A)
Refrigerant
Refrigerant charge heat pump
Weight
mm
Kg
Air flow volume
Infra-red
Infra-red
Infra-red
Infra-red
29/35/40
37/40/44
41/45/48
265/790/200
265/790/200
295/920/225
325/1,000/235
8.5
8.5
11.5
16.5
VAI 2-025 WN
VAI 2-035 WNO
VAI 2-050 WNO
VAI 2-065 WNO
1060/1800
1060/1800
1360/2200
2000/2700
Outdoor unit
Sound pressure level (min-max)2
Dimensions HxLxD
Net weight
60
62
64
66
R410a
R410a
R410a
R410a
Sound pressure level (min-max)3
1950
Refrigerant
1180
DC inverter twin rotary DC inverter twin rotary DC inverter twin rotary DC inverter twin rotary
Refrigerant charge heat pump
600/760/285
600/760/285
600/760/285
695/845/315
Inverter DC/AC
38
38
39.5
52
Dimensions HxLxD
Installation
Power supply
Net weight
V/Ph/Hz
m3/h
Remote control type
Air flow volume
1100
kWh
Indoor unit
28/33/39
gr 1100
Compressor type
Dimensions HxLxD
Annual consumption
1
A
240/1/50
240/1/50
240/1/50
240/1/50
Installation
VAI 1-025 WNI
VAI 1-035 WNI
350/450/600
350/450/600
Infra-red
dB(A) 22/38
mm
Kg
m3/h
Infra-red
22/38
290x905x165
290x905x165
10.0
10.0
VAI 1-025 WNO
VAI 1-035 WNO
1060/1800
1060/1800
dB(A) 52/57
52/57
R410A
R410A
1,100
1,260
Inverter DC rotary
Inverter DC rotary
590x760x285
590x760x285
38
39
gr
mm
Kg
Max. operating current
A
7
9
12
15
Power supply
230/1/50
230/1/50
Recommended fuse size (Type D)
A
10
10
16
20
Max operating current
A
8.50
9.00
Interconnecting cores (indoor to outdoor)
3 core + earth
3 core + earth
3 core + earth
4 core + earth
Recommended Fuse size (Type D)
A
10
10
Supply to:
Indoor
Indoor
Indoor
Indoor
Interconnecting cores (indoor to outdoor)
3 core + Earth
3 core + Earth
Supply to:
Outdoor
Outdoor
1/4 - 3/8
1/4 - 3/8
Pipe connection liquid/gas
in
1/4 - 3/8
1/4 - 3/8
1/4 - 1/2
1/4 - 1/2
Max. piping length
m
20
20
25
25
Max. height differential indoor to outdoor
m
10
10
10
10
Chargeless length
m
7.5
7.5
7.5
7.5
Additional charge per metre
gr
20
20
20
20
Actual ratings dependent on system components.
Sound pressure level indoor unit: directivity 3 dB(A) distance 2.2m.
3
Sound pressure level external unit: directivity 3 dB(A) distance 1.8m.
Nominal cooling capacities based on indoor temperatures of 27ºCDB/19ºCWB -- outdoor temperatures 35ºCDB/24ºCWB.
1
V/Ph/Hz
Pipe connection liquid/gas
in
Max. piping length
m 20
20
Max. height differential indoor to outdoor
m 10
10
Chargeless length
m 7.5
7.5
Additional charge per meter
gr
20
20
2
Based on 500 hours operating at maximum load.
Sound pressure level IU: directivity 3 dB(A), 0.8m in height and 1.0m in distance.
3
Sound pressure level OU: directivity 3 dB(A), distance 1.0m, height is at centre of outdoor fan.
1
2
36 / 37
Customer service support
contact details
Working in partnership
The after sales service and support behind every Vaillant product has
helped us build a reputation for quality and reliability within the industry.
It is an approach that is reflected in our support for our heat pump systems.
We are committed to working in partnership with our installers, offering the
very best industry support and training to develop the heat pump market.
Vaillant support team
Our dedicated team is on-hand to offer technical support. We are here to
help with product familiarisation and to tackle any other issues that arise
in relation to our heat pump range.
High quality training
Please contact our training team to register your interest in attending
a Vaillant heat pump training course.
Contact details
Head Office
Vaillant Ltd, Vaillant House, Trident Close, Rochester,
Kent ME2 4EZ
Telephone
E-mail
Sales
Telephone
Fax
E-mail
Contracts, Partnering & Leasing
Telephone
01634 292300
info@vaillant.co.uk
01634 292310
01634 712804
sales@vaillant.co.uk
01634 292322
Fax
E-mail
Technical
01634 292379
contracts@vaillant.co.uk
Telephone
E-mail
01634 292392
technical@vaillant.co.uk
Training
Telephone
Fax
E-mail
After Sales Service
Telephone
Fax
E-mail
Mon - Fri
Website
01634 292370
01634 292354
training@vaillant.co.uk
0870 850 3073
01634 294506
service@vaillant.co.uk
8.30am - 5.30pm
www.vaillant.co.uk
38 / 39
Current training courses
Setting the standard for
customer training
ecoTEC high efficiency domestic boiler range
A one-day course covering our latest range of
Air to water heat pump product course
A one-day product course looking at the geoTHERM
condensing boilers, including installation, operation,
servicing and repair.
air range of air to water heat pumps. The day will cover
installation, operation, service and repair.
Commercial boiler range
Air to air heat pump product course
A one-day course covering commercial installation,
operation, servicing and repair.
A one-day course designed for installers who wish to
expand their knowledge of air to air heat pumps.
BPEC unvented domestic hot water
Ground source heat pump product course
Three courses are available to suit all candidates
wanting to take this assessment.
A one-day product course looking at the geoTHERM
range of ground source heat pumps. The day will cover
installation, operation, service and repair.
Unvented domestic hot water initial assessment
State of the art Vaillant Training Centre in Bristol
As the industry’s leading training provider, Vaillant
offers comprehensive training courses which can add
Who are Vaillant training courses designed for?
value to your business.
Gas Safe Registered Installers
IPHE Registered Installers
Every year we train thousands of professionals.
We are continually developing and improving our training
programmes and facilities to provide a service that
matches your requirements.
SNIPEF Registered Installers
Local Authorities and Housing Associations
Service Organisations
Architects and Specifiers
Merchants and Spare Part Stockists
Solar DHW installers
Commercial boiler heating installers
Every one of Vaillant’s training courses is based on
practical and detailed hands-on experience, backed
up by expert tuition.
The aim of each Vaillant Training Course is to help
improve your skills, which in turn can help you to
improve your profit. That’s why so many choose
Vaillant as their training provider.
A one-day BPEC certificated course comprising a
theory training session in the morning followed by
BPEC heat pump course
A two-day BPEC certificated course for professionals
assessment in the afternoon.
seeking a GSHP qualification.
Unvented domestic hot water re-assessment
A half-day course comprising a brief update
tutorial followed by the BPEC re-assessment
examination paper. Please note to be eligible for this
assessment all candidates must already hold a
certificate of competence for unvented domestic hot
water (expired or current), and will be required to present
it prior to the assessment.
Mechanical ventilation heat recovery product course
A one-day product course looking at the recoVAIR range
of mechanical ventilation heat recovery units. The day
will cover installation, operation, service and repair.
Unvented domestic hot water defined scope assessment
A one-day defined scope BPEC certificated course for
those wanting a better understanding of unvented
domestic hot water systems, but not intending to install
them. Please note this course does not qualify you to
install unvented domestic hot water systems in
accordance with part G3 of the Building Regulations.
Domestic controls training
A one-day course designed to give you the best knowledge
and expertise with our range of controls and accessories.
MCS Installer Scheme
A one-day course designed to provide installers with a
thorough understanding of what is involved in getting
MCS accreditations and giving them all of the tools to be
able to do this.
Solar product course
A one-day course for heating professionals wanting
to get a basic understanding of solar domestic
heating systems.
BPEC CPA 1 Combustion Analyser Assessment
From 1st February 2010, CPA1 will be a pre-requisite for
anyone wishing to take ACS elements CEN1 and HTR1.
We offer a one-day BPEC certificated course for those
proficient in the use of a combustion analyser. The day
comprises an update tutorial in the morning followed by
assessment in the afternoon. If you would like to receive
additional training on flue gas analysis or would just like
the opportunity to practice with your own analyser, please
contact us for further details.
BPEC solar DHW course
A two-day course for heating professionals looking to
gain solar heating BPEC certification.
Tailor-made courses
The Vaillant training department creates custom made
programmes to suit your company’s individual training needs.
BPEC solar DHW course
A two-day defined scope BPEC certificated course for
those wanting a better understanding of solar domestic
hot water systems, but not intending to install them.
For more information on any Vaillant training course
please contact our Training Department on:
Telephone: 01634 292370 Fax: 01634 292354
E-mail: training@vaillant.co.uk
www.vaillant.co.uk/installers/training
FGas regulations course
Three-day training course leading to the Construction
Skills assessment on the FGas Regulations.
Certificate in Energy Efficiency for Domestic Heating
A one-day course to help you promote the benefits of
high efficiency boilers to your customers.
40 / 41
Notes
Notes
42 / 43
Medway City Estate
Telephone 01634 292300
Trident Close
Fax 01634 290166
Rochester
www.vaillant.co.uk
Kent ME2 4EZ
info@vaillant.co.uk
0020052432 • 06 2011 • Heat pump range brochure.
Vaillant Ltd.
Vaillant House
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising