Fujitsu LifeBook T Series BIOS Guide

Fujitsu LifeBook T Series BIOS Guide
Fujitsu LifeBook
T Series
BIOS Guide
LifeBook T Series Model:
T4210
Document Date: 06/08/2006
Document Part Number: FPC58-1516-01
FUJITSU COMPUTER SYSTEMS
1
LifeBook T Series Tablet PC
T Series BIOS
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main,
Advanced, Security, Boot, Info and Exit. This document
explains each menu in turn including all submenus and
setup items.
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your tablet. Your BIOS is set
at the factory for normal operating conditions, therefore
there should be no need to set or change the BIOS
environment to operate your tablet.
The following procedures allow you to navigate the
setup utility menus:
1. To select a menu, use the cursor keys: [
The BIOS Setup Utility configures:
■
■
cursor keys:
1. Turn on or restart your notebook.
2. Press [F2] once the Fujitsu logo appears on the
screen. This will open the main menu of the BIOS
Setup Utility with the current settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the
[Enter] key or click on the left mouse or touchpad
button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the
following menus and information screens:
■
■
■
■
[ ], [ ].
3. To select the different values for each field, press the
[Spacebar] to change to the next higher selection
and [F5] or [-] to go to the next lower selection.
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press the [Esc]
key.
6. To go to the Exit menu from any other menu, press
the [Esc] key.
To enter the BIOS Setup Utility, do the following (or use
the TrustedCore Menu, as detailed in the next section):
■
].
2. To select a field within a menu or a submenu, use the
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such as
passwords.
Entering the BIOS Setup Utility
■
], [
■
Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.
■
Pressing the Enter key with the highlight
on a selection that is not a submenu or
auto selection will cause a list of all
options for that item to be displayed.
Pressing the Enter key again will select
the highlighted choice.
7. Pressing the [F9] key resets all items in the BIOS to
the default values.
8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
BIOS Setup
Diagnostic Screen
Boot Menu
Patent Information
System Information
Continue Booting
Clicking on any of the fields will invoke the screen,
information, or action described.
Entering the Setup Utility After a Configuration
Change or System Failure
The Boot Menu can also be invoked by pressing the
[F12] key when the Fujitsu logo appears on the screen.
If there has been a change in the system configuration
that does not agree with the parameter settings stored in
your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not too
2
Main Menu
severe, it will give you the opportunity to modify the
settings of the setup utility, as described in the following
steps:
1. When you turn on or restart the computer there is
a beep and/or the following message appears on
the screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key.
■
If your tablet emits a series of beeps that
sounds like a code and the display is
blank, please refer to the Troubleshooting section of your system Use’s Guide.
The Troubleshooting Section includes a
list of error messages and their meanings.
■
If your data security settings require it,
you may be asked for a password before
the operating system will be opened.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
LifeBook T Series Tablet PC
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information)
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or type time or date from the MS-DOS
prompt.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
the field’s function and any special information needed
to help understand the field’s use. Note that the actual
drive labels shown may vary.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Boot
Info
Exit
Item Specific Help
▲ ▲
System Time:
System Date:
[02:34:56]
[06/08/2006]
Drive0
Drive1
[FUJITSU MHV2040BH]
[MATSHITADVD-RAM UJ-840S]
Language:
[English (US)]
Select Item
Select Menu
<Tab>, <Shift-Tab>, or
<Enter> selects field.
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Adjust calendar clock.
Figure 1.
F9 Setup Defaults
F10 Save and Exit
Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour
format of hours:minutes:seconds with 2 digits for each.
(HH:MM:SS). Example: 16:45:57. You may change each
segment of the time separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/
year numeric format with 2 digits each for month and day
and 4 digits for year. (MM/DD/YYYY) for example: 03/20/
1998. You may change each segment of the date separately. Move between the segments with the [Tab] key
and/or [Shift] + [Tab] keys.
Drive0
Selects the Drive0
Serial ATA drive submenu
The product
number of the
hard drive.
Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Drive0 submenu allowing additional device
configuration options for this interface.
Drive1:
Selects the Drive1
Serial ATA drive submenu
The product
number of the
CD-ROM drive.
Display the type of device on this ATA/IDE interface, if there is one.
Pressing the Enter key selects the Serial ATA Drive1 submenu allowing additional device configuration options for this interface.
Language:
■
English (US)
Japanese (JP)
[English (US)]
The default setting differs between the US/European and
the Japanese model. Selects the display language for the
BIOS.
■
5
LifeBook T Series Tablet PC
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed.
Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads
and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Drive0 [FUJITSU MHV2040BH]
Type:
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
LBA Format
78140160
40008MB SATA1
Total Sectors:
Maximum Capacity:
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 2. Drive0 Submenu
Menu Field
Options
Default
Description
Type:
■
[Auto]
Selects the hard drive device type. Select Auto to have the type automatically identified
by the BIOS at POST. If None is selected, all of the following Setup items do not appear.
■
Auto
None
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
Maximum Capacity:
---
---
The maximum capacity of your hard disk
■
A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or
DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk
format CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take
drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or
DVD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is
always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your
application software will use the new designations.
■
Be aware of the operating environment when booting from CD-ROM/DVD-ROM or you may mistakenly
overwrite files.
6
Main Menu
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads
and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Primary Master [MATSHITADVD-RAM UJ-840S]
Item Specific Help
Select Serial ATA/IDE
drive installed here.
Type:
[Auto]
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
[Disabled]
[Disabled]
[Standard]
[Disabled]
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 3. Drive1 Submenu
Menu Field
Options
Default
Description
Type:
• Auto
• None
[Auto]
NOTE: The Type field does not appear as a drop-down menu. Tap the
spacebar to toggle the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following
setup items do not appear.
Multi-Sector
Transfers:
•
•
•
•
•
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
LBA Mode
Control:
• Disabled
• Enabled
[Disabled]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Specifies the number of
sectors per block for multiple sector transfer.
[Disabled]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Enables or disables Logical
Block Addressing in place of Cylinder, Head, Sector addressing.
7
LifeBook T Series Tablet PC
Menu Field
Options
Default
Description
Transfer Mode:
•
•
•
•
•
•
•
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Standard]
When Type is set to [Auto], the BIOS automatically selects the optimal
Transfer Mode settings. These settings cannot be changed by the user.
Ultra DMA
Mode:
•
•
•
•
•
•
•
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
When Type is set to [Auto], the BIOS automatically selects the optimal
Transfer Mode settings. These settings cannot be changed by the user.
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu or to move to another menu.
8
Main Menu
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
■
Set the I/O addresses for the infrared ports.
■
Set the features of the keyboard/mouse.
■
Select between the display panel and/or an external
CRT display or video projector.
■
Set internal device configurations
■
Configure USB features.
■
Configure miscellaneous features such as Wake Up On
LAN.
■
Configure DMI Event Logging.
Main
Advanced
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
(See Navigating through the Setup Utility on page 2 for
more information)
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a description of the field’s function, and any special information
needed to help understand the field’s use.
PhoenixBIOS Setup Utility
Security
Boot
Info
Exit
Item Specific Help
▲ ▲ ▲ ▲ ▲ ▲▲
IrDA Port Configurations
Keyboard/Mouse Features
Video Features
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Configures IrDA ports.
▲
Event Logging
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Figure 4. Advanced Menu
9
F9 Setup Defaults
F10 Save and Exit
LifeBook T Series Tablet PC
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
IrDA Port Configurations
When selected, opens the IrDA Port Configurations submenu which allows the user to modify settings for
infrared ports.
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal
keyboard and mouse parameters.
Video Features
When selected, opens the Video Features submenu, which allows setting of the display parameters,
including routing of video signals to different displays or video projectors.
Internal Device
Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the IDE
LAN, and modem controllers.
CPU Features
When selected, opens the CPU Features submenu, which allows the user to enable or disable Core Multi-Processing and modify the Intel(R) SpeedStep(R) features.
USB Features
Configures USB features.
Miscellaneous
Configurations
Configures miscellaneous features, such as Wake Up On LAN and Power Button.
Event Logging
When selected, opens the event logging submenu.
10
Advanced Menu
IrDA Port Configuration Submenu of the Advanced Menu
The IrDA Port Configuration submenu provides the
ability to set the I/O addresses and interrupt levels for
the infrared ports of your system.
■
To prevent IRQ and address conflicts,
avoid changing the default settings. If
you must change the settings, you can
call 1-800-8Fujitsu for technical assistance.
■
The BIOS will warn you of resource conflicts by placing a yellow asterisk next to
each device that is in conflict.
■
I/O addresses, DMA channels, and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices
have the same I/O address assigned your
tablet will not function normally. Please
keep a record of original settings before
making any changes in the event that a
restoration is required. See your hardware
and software documentation as well as the
setup utility to determine settings,
limitations, etc.
All I/O addresses in Table 5 are in hexadecimal.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
IrDA Port Configurations
Infrared Port:
Mode:
I/O Address:
Interrupt:
DMA Channel:
[Enabled]
[FIR]
[2E8-2EF]
[IRQ 6]
[DMA 3]
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Figure 5. IrDA Port Configuration Submenu
11
F9 Setup Defaults
F10 Save and Exit
LifeBook T Series Tablet PC
Table 5: Fields, Options and Defaults for IrDA Port Configuration Submenu of Advanced Menu
Menu Field
Options
Default
Description
Infrared Port:
■
Disabled
Enabled
Auto
[Enabled]
Configures the infrared port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
IrDA
FIR
[FIR]
Select whether to use normal infrared or fast infrared mode.
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[2E8 - 2EF]
Allows user to set the infrared port base I/O address when infrared port is
Enabled.
IRQ 3
IRQ 6
IRQ 10
IRQ 11
[IRQ 6]
Allows user to set the infrared port interrupt when infrared port is Enabled.
DMA 1
DMA 3
[DMA 3]
Allows user to set the infrared port DMA Channel when the infrared port
is Enabled.
■
■
Mode:
■
■
I/O Address:
■
■
■
■
Interrupt:
■
■
■
■
DMA Channel:
■
■
12
Advanced Menu
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of NumLock.
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Keyboard/Mouse Features
Numlock:
[Off]
[On] or [Off]
Numlock is On or Off.
[On/Padlock Off]
Numlock is On, but use
with [Fn] for 10-key
input.
* Windows XP preserves
Numlock state when the
user logs off.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Numlock:
■
[Off]
Sets the NumLock function state when the computer completes
booting. When [On] or [Off], Numlock is on or off. When [On/
Padlock Off] is selected, Numlock is on, but [Fn] key must be
pressed used for 10-key input. When [Auto] is selected, Numlock is
set to On/Padlock Off when a PS/2 keyboard is connected, otherwise it is off.
■
■
On
Off
On/Padlock Off
Windows XP preserves Numlock state when the user logs off.
13
LifeBook T Series Tablet PC
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Video Features
Display:
Compensation:
[Auto]
[Enabled]
Select display terminal.
* This setting is not
effective after
operating system
starts up.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Display:
■
■
■
■
Compensation:
■
■
Default
Description
Internal Flat Panel
External (Analog)
External (Digital)
Auto
[Auto]
Selects where the video signal will be routed. Note that
once the system boots up, the settings for the Windows
video driver take precedence over this setting.
Disabled
Enabled
[Enabled]
Enables or disables display compensation. Display compensation is used to match the native resolution of the
display with the input. For example, if you are using an
application whose resolution causes it to appear smaller
than the screen, enabling Compensation will expand the
image to fill the screen.
14
Advanced Menu
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Internal Device Configurations
Serial ATA Controller:
AHCI Configuration:
IDE Contoller:
Bluetooth(R):
LAN Controller:
Wireless LAN:
Select Item
Select Menu
[Enabled]
Serial ATA port is
enabled.
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
[Disabled]
Serial ATA port is
disabled.
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
F9 Setup Defaults
F10 Save and Exit
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Serial ATA
Controller:
■
Disabled
Enabled
[Enabled]
Enables or disables serial ATA devices.
AHCI Controller:
■
Disabled
Enabled
[Enabled]
Enables or disables the AHCI (Advanced Host Controller Interface).
This selection does not appear when Serial ATA Controller is disabled.
Disabled
Enabled
[Enabled]
Allows you to enable and/or disable any or all IDE devices.
Disabled
Enabled
[Enabled]
Enables or disables the optional Bluetooth device.
Disabled
Enabled
[Enabled]
Enables or disables the LAN controller.
Disabled
Enabled
[Enabled]
Enables or disables the optional wireless LAN device.
■
■
IDE Controller:
■
■
Bluetooth(R):
■
■
LAN Controller:
■
■
Wireless LAN:
■
■
15
LifeBook T Series Tablet PC
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
CPU Features
Core Multi-Processing:
Select Core
Multi-Processing
enabled or disabled.
[Enabled]
SpeedStep(R) Technology:
On Battery:
On AC:
[Enabled]
[Battery Optimized]
[Maximum Performance]
XD Bit functionality:
[Enabled]
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 9. CPU Features Submenu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Core MultiProcessing:
■
Enabled
Disabled
[Enabled]
Enables or disables the Intel Core Multi-Processing features.
SpeedStep(R)
Technology:
■
Disabled
Enabled
[Enabled]
Enables or disables SpeedStep(R) Technology which allows the
user to determine the CPU performance when the tablet is running on AC or battery. This technology decreases power consumption by decreasing CPU speeds.
On Battery:
■
Maximum
Performance
Battery Optimized
Automatic
[Battery
Optimized]
Allows the user to select the CPU performance when the system
is running on battery power.
Maximum
Performance
Battery Optimized
Automatic
[Maximum
Performance]
Allows the user to select the CPU performance when the system
is running on AC power.
■
■
■
■
On AC:
■
■
■
16
Advanced Menu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
XD Bit
functionality:
■
[Enabled]
Allows the user to enable and disable the Execute Disable Bit
functionality. Execute Disable Bit allows the processor to classify
areas in memory where application code can and cannot
execute. In the event an internet worm attempts to insert code
in the buffer, the processor disables code execution to prevent
damage or worm propagation.
■
Disabled
Enabled
17
LifeBook T Series Tablet PC
USB Features Submenu of the Advanced Menu
The USB Features Submenu configures the USB features for your system.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
USB Features
Legacy USB Support:
SCSI SubClass Support:
Item Specific Help
[Enabled]
[Enabled]
[Disabled]
The feature is disabled.
[Enabled]
Legacy Floppy Emulation
is enabled and USB
floppy is available
without USB aware OS.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Legacy USB
Support:
■
SCSI SubClass
Support:
■
■
■
Default
Description
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy USB emulation is disabled. When Enabled is selected, legacy USB emulation is
enabled and USB devices are available without USB-aware
OS.
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the
SCSI subclass in the mass storage class (e.g., USB Memory
Keys) are enabled.
18
Advanced Menu
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures miscellaneous features for your system.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Miscellaneous Configurations
Power Button:
Wake up on LAN:
Force LAN Boot:
Auto Save To Disk:
Volume Setting:
UMA Video Memory Size:
Hardware Power Management:
Select Item
Select Menu
Configures the power
button.
*ACPI OS ignores this
setting.
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
[Disabled]
[Disabled]
[Disabled]
[Off]
[Middle]
[128MB]
[Enabled]
F9 Setup Defaults
F10 Save and Exit
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Power Button:
■
■
Wake up on
LAN:
Force LAN Boot:
■
■
■
■
Auto Save To Disk:
■
■
Default
Description
Disabled
Power Off
[DIsabled]
When Disabled is selected, the power button does not
respond to a press. When Power Off is selected, the button
turns the power off.
Disabled
Enabled
[Disabled]
When Enabled is selected, the system will wake up when the
internal LAN device receives a Magic Packet while the system
is powered off.
Disabled
Enabled
[Disabled]
This feature is active only when “Wake up on LAN” is enabled. When
enabled, in the event of a system wake-up on LAN, the system will try
to first boot from the LAN before attempting to boot from any other
device, regardless of the BIOS boot priority settings or disabling of the
Preboot Execution Environment.
Off
On
[Off]
When turned On, when the battery becomes low and the system is in
Standby mode, the system will automatically save its state and then
power off.
19
LifeBook T Series Tablet PC
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
Volume Setting:
■
Off
Minimum
Middle
Maximum
[Middle]
Selects the initial volume setting for the system.
64MB
128MB
224MB
[128MB]
Allows you to select the maximum shared video memory size. Video
memory is dynamically allocated as needed for running applications by
Dynamic Video Memory Technology (DVMT).
Disabled
Enabled
[Enabled]
When enabled, the Hardware Power Management feature is enabled.
■
■
■
UMA Video
Memory Size:
■
■
■
Hardware Power
Management:
■
■
20
Security Menu
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.
Main
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Advanced
Item Specific Help
Event Logging
Event Log Capacity:
Event Log Validity:
Space Available
Valid
View Event Log:
[Enter]
Event Logging:
System Boot Event:
[Enabled]
[Disabled]
Clear All Event Logs:
[No]
Mark Events as Read:
[Enter]
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Press <Enter> key to
view the contents of
the event log.
F9 Setup Defaults
F10 Save and Exit
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log Capacity:
Space
Available
Display only.
Event Log Validity:
Valid
Display only.
View Event Log:
■
Enter
[Enter]
Allows you to view content of event log.
Event Logging:
■
Disabled
Enabled
[Enabled]
Turns event logging on and off for all DMI events.
Disabled
Enabled
[Disabled]
Turns event logging on and off for DMI system boot events.
No
Yes
[No]
When set to [Yes] all event logs will be cleared at next boot.
Enter
[Enter]
Allows you to make all events currently in the event log as read.
■
System Boot
Event:
Clear All Event Logs:
■
■
■
■
Mark Events as Read:
■
21
LifeBook T Series Tablet PC
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your tablet to fit your operating needs and to
view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating through the Setup
Utility on page 2 for more information)
Entering a password incorrectly three times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled] to be displayed. If
this happens, restart the computer by
turning off and on the power with the
power switch and use the correct
password on reboot. Note: Unless you
have previously enabled the power switch
in the BIOS, it will not be possible to turn
off the unit with the switch. This is
applicable for non-ACPI OS’s.
Main
Advanced
■
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access
to your secured functions and data.
■
If you make an error when re-entering
the password a [Warning] will be displayed on the screen. To try again press
the [Enter] key and then retype the password. Press the [Esc] key to abort the
password setting process.
■
If the Password on Boot is Disabled you
will not have to type your password
upon resuming the system from the
Standby or Hibernate modes.
The following tables show the names of the menu fields
for the Security menu and its submenus, the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
PhoenixBIOS Setup Utility
Security
Boot
Info
Exit
Item Specific Help
Clear
Clear
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
Security Chip Setting
[Enter]
[Enter]
[0]
[Disabled]
[Disabled]
[All]
[Enabled]
Security Panel On Resume:
[Enabled]
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
▲ ▲▲
Supervisor Password Is:
User Password Is:
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Figure 13. Security Menu
22
F9 Setup Defaults
F10 Save and Exit
Security Menu
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general User Password is
set, and Clear when it is not.
Set Supervisor
Password
[Enter]
[Enter]
Sets, changes or cancels Supervisor Password. The Supervisor Password
may be up to eight characters long and include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New
Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility.
Set User Password
[Enter]
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up
to eight characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New
Password field and in the Re-enter New Password field. When a User
Password is set it must be used to access the BIOS setup utility.
Minimum User
Password Length:
[0]
[0]
Sets the minimum length for User Password.
Password on Boot:
■
Disabled
First Boot
Every Boot
[Disabled]
When Enabled, a password (User or Supervisor) is required after the
Power On Self Test (POST) before the operating system will be read
from a disk. When set to Disabled no password is required. If no Supervisor Password is set this feature is not available and no password is
required.
Disabled
Enabled
[Disabled]
This field is active only when Password On Boot is set to First Boot or
Every Boot. When disabled, password entry is not required on automatic wake up on LAN or Real Time Clock. When enabled, the password is still required on automatic wake up.
All
Supervisor
only
[All]
Selecting Supervisor Only allows supervisor access only.
Disabled
Enabled
[Enabled]
When set to disabled, the BIOS Flash Memory will be write-protected.
■
■
On Automatic
Wake up:
■
Boot from
Removable Media:
■
Flash Write:
■
■
■
■
Hard Disk Security
–—
–—
Submenu that allows you to configure hard disk security features.
Owner
Information
–—
–—
Submenu that allows you to set Owner information.
Security Chip
Setting
–—
–—
Submenu that allows you to configure the security chip.
Security Panel On
Resume
■
[Enabled]
Allows the Security Panel Feature to be enabled or disabled upon Suspend from Resume.
■
Disabled
Enabled
23
LifeBook T Series Tablet PC
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Hard Disk Security
Drive0 Password Is:
Drive1 Password Is:
Clear
Not Available
*Set Drive0 Password
Set Drive1 Password
[Enter]
[Enter]
Item Specific Help
Password Entry on Boot: [Enabled]
*HArd Disk Password cannot be set or changed
if the system is rebooted from OS. Choose "Save
Changes and Power Off" in Exit Menu to shut down
the system, then Hard Disk Password can be set
or changed on next boot.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
Drive0
Password Is:
---
---
A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
and Clear when it is not.
Drive1
Password Is:
---
---
A display-only field. Not Available is displayed.
Set Drive0
Password
---
[Enter]
Sets, changes or cancels Drive0 Password. The password may be up to eight characters long and include only letters or numbers (no symbols). Passwords are NOT
case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field.
When a Drive0 Password is set it must be used to access the hard disk. Data on
the hard disk cannot be read on other systems.
Set Drive1
Password
---
[Enter]
Not currently available.
Password
Entry on Boot:
■
[Enabled]
When this is disabled, it is not necessary to enter the password before booting.The hard disk is still password-protected without entering a boot password.
■
Disabled
Enabled
24
Security Menu
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set
without having entered a supervisor’s password.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Owner Information
Owner Information Is:
Clear
Set Owner Information
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
Press <Enter> key to
set owner information.
Up to 80 characters can
be set. Available
characters are ASCII
codes from 32 through
126.
The owner information
is always displayed at
the bottom line of the
screen during POST.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner
Information Is:
–—
Clear
Display only.
Set Owner
Information:
–—
[Enter]
Field to write owner information (e.g., your name).
Foreground
Color:
■
Light Red
Light Magenta
Yellow
Bright White
[Gray]
Set foreground color.
Light Red
Light Magenta
Yellow
Bright White
[Black]
Sets background color.
■
■
■
Background
Color:
■
■
■
■
Black
Blue
Green
Cyan
■
Black
Blue
Green
Cyan
■
■
■
■
■
■
■
Red
Magenta
Brown
White
■
Red
Magenta
Brown
White
■
■
■
■
■
■
■
Gray
Light Blue
Light Green
Light Cyan
■
Gray
Light Blue
Light Green
Light Cyan
■
■
■
■
■
■
■
25
LifeBook T Series Tablet PC
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.
Main
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Advanced
Security Chip Setting
[Disabled]]
[Enter]
Security Chip:
Clear Security Chip:
Security Chip State:
Disabled
Deactivated
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 16. Security Chip Setting Submenu
Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu
Menu Field
Options
Default
Description
Security Chip:
■
[Disabled]
Allows you to enable or disable the security chip. Note that this is only
active if a Supervisor Password has been entered. A reboot is required after
exit to configure the Security Chip correctly. Clear Security Chip option
becomes selectable after reboot.
■
Disabled
Enabled
Clear Security Chip
–—
[Enter]
This field is not selectable until after the security chip is enabled and the system is rebooted.
Security Chip State:
–—
–—
Display only, to indicate the state of the chip if it has been enabled, disabled, activated or deactivated.
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
26
Boot Menu
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information)
Main
Advanced
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
PhoenixBIOS Setup Utility
Security
Boot
Info
Exit
Item Specific Help
▲
Quick Boot:
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment:
Boot Device Priority
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
Select Item -/Space Change Values
Select Sub-Menu
Select Menu Enter
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 17. Boot Menu
Table 17: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
Quick Boot:
■
Disabled
Enabled
[Enabled]
Turns on and off booting with a truncated set of Power On Self Tests. (Fewer
tests mean faster booting.)
Disabled
Enabled
[Disabled]
Turns on and off display of test results instead of Fujitsu logo screen during
Power On Self Test.
Disabled
Enabled
[Enabled]
When disabled, the [F12] key cannot be used to invoke the Boot menu. When
enabled, click the [F12] button to display the Boot menu while booting up.
Disabled
Enabled
[Disabled]
Turns on and off boot from network server options.
__
This menu allows setting up the source for the operating system. See “Boot
Device Priority Submenu” in the following section. Pressing the [F12] key will
also let you choose the boot device.
■
Boot Time
Diagnostic Screen:
■
Boot Menu:
■
■
■
Preboot Execution
Environment:
■
Boot Device
Priority:
Selects Boot
Device Priority
submenu
■
27
LifeBook T Series Tablet PC
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
■
Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.
■
A bootable CD-ROM has either a floppy disk or a hard drive format. When a bootable CD-ROM is used,
drive allocations change automatically without changing the BIOS setup. If floppy disk format is used, the
CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard
drive is not present or is disabled. A bootable CD-ROM cannot use a C: designation if a formatted internal
hard drive is present since the C: designator is always reserved for the internal hard drive.The boot
sequence ignores new drive designations, but your application software will use the new designations.
■
In order for a portable USB memory device (e.g., JumpDrive or memory stick) to be recognized in the Boot
Device Priority list, it must have been installed before booting the system.
■
Note that some older portable USB memory devices may not be recognized as bootable devices.
■
The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12]
key. (See Using the TrustedCore Menu on page 2 for more information)
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
Boot priority order:
1: Floppy Disk Drive
2: Drive0: FUJITSU MHV2040BH
3: Drive1: None
4: CD/DVD Drive
5: NETWORK: B02 D00 Yukon PXE
6:
7:
8:
Excluded from boot order:
: USB MEMORY: None
: USB HDD: None
Select Item
Select Menu
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Keys used to view or
configure devices:
Figure 18. Boot Device Priority Submenu
28
F9 Setup Defaults
F10 Save and Exit
Exit Menu
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: Drive1:
4: CD/DVD Drive
5: NETWORK:
6:
7:
8:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
The boot selections determine the order in which the BIOS searches for the operating system during a
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and
then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is
not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to
save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
29
LifeBook T Series Tablet PC
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the
configuration information for your tablet.
those fields. These fields are for information purposes
only, and are not editable.
The following table shows the names of the menu fields
for the Info menu and the information displayed in
Main
The information, including CPU type and
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.
PhoenixBIOS Setup Utility
Security
Boot
Info
Advanced
BIOS Version:
BIOS Date:
BIOS Area:
1.02
05/10/2006
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Genuine Intel(R) CPU T2300
1.66 GHz
128 KB
2048 KB
Exit
Total Memory:
256 MB
Memory Slot 1: 256 MB DDR2 SDRAM
Memory Slot 2: None
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9
F10
Setup Defaults
Save and Exit
Figure 19. Info Menu
Table 19: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon your system configuration.
Menu Field
Default
Menu Field
Default
BIOS Version:
1.02
L1 Cache:
128 KB
BIOS Date:
05/10/2006
L2 Cache:
2048 KB
BIOS Area:
E000h – FFFFh
Total Memory:
256 MB
CPU Type:
Genuine Intel(R) CPU T2300
Memory Slot 1:
256 MB DDR2 SDRAM
CPU Speed:
1.66 GHz
Memory Slot 2:
None
30
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating through the Setup Utility on page 2 for more information). The following table shows
the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any
special information needed to help understand the field's use.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Exit System Setup and
save your changes to
CMOS.
F9
F10
Setup Defaults
Save and Exit
Figure 20. Exit Menu
Table 20: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory
and then exit the setup utility. A confirmation message Save Configuration changes and exit
now? [Yes] [No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility without writing to the BIOS memory.
When the BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the
message Load default configuration now? [Yes] [No]. When confirmed the setup utility will
return to the Exit Menu. To return to another menu follow the directions in the Navigating Through the
Setup Utility Section.
Discard
Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message
Load previous configuration now? [Yes] [No] will be displayed. When confirmed the utility
will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the
Setup Utility Section.
31
LifeBook T Series Tablet PC
Table 20: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Save Changes
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message
Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup
utility will return to the Exit menu. To go to another menu, follow the directions in the Navigating Through
the Setup Utility section.
Save Changes
and Power Off
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS
memory, then power the system off. The message Save configuration changes now and power
off? [Yes] [No] will be displayed. When confirmed, the setup utility shut down the system.
32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising