- No category
advertisement
product specifications
369225j 02.21.14
RadioRA
®
2 Maestro
®
Local Controls
RadioRA
®
2 Maestro
®
local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. Local fan speed controls are useful in locations where control of a single ceiling paddle fan is needed.
RadioRA
®
2 Maestro
®
dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on.
RadioRA
®
2 Maestro
®
local controls include a
Front Accessible Service Switch (FASS
TM
) for safe lamp replacement. RadioRA
®
2 Maestro
® local controls install in single-pole or multi-location applications. Remote dimmers/switches are available for multi-location control.
Use Lutron
®
Designer (Claro
®
or Satin Colors
®
) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron
®
Claro
®
and Satin Colors
® wallplates snap on with no visible means of attachment. RadioRA
®
2 Maestro
®
local controls support color change kits.
Dimmer Switch
Remote Dimmer Remote Switch
Fan Speed
www.lutron.com
1 Technical Support — 800.523.9466 (USA)
product specifications
369225j
RadioRA
®
2 Maestro
®
Local Controls
Model Numbers
Dimmers
Incandescent/Halogen/MLV (120 V~)
RRD-6CL-XX 600 W/VA (Incandescent/Halogen/MLV) or 150 W (CFL/LED)
Two-Wire Dimmer*
RRD-6D-XX
RRD-10D-XX
600 W Incandescent/Halogen, 600 VA Magnetic Low Voltage
1000 W/1000 VA Dimmer
RRD-10ND-XX 1000 W/1000 VA Neutral Wire Dimmer
Incandescent/Halogen/MLV/ELV (120 V~)
RRD-6NA-XX 600 W/600 VA Neutral Wire Adaptive Dimmer
3-Wire Fluorescent/LED (120-277 V~)
RRD-F6AN-DV-XX 6 A Neutral Wire Dimmer
Switches
Lighting and Motor Loads (120 V~)
RRD-8ANS-XX 8 A Light, 1/4 HP 5.8 A Motor Neutral Wire Electronic Switch
Lighting and Motor Loads (120-277 V~)
RRD-8S-DV-XX 8 A Light, 1/10 HP 3 A Motor Two-Wire Electronic Switch
Fan Speed Control
Single ceiling paddle fan only (120 V~)
RRD-2ANF-XX 2 A Fan Speed Control
Remotes (for multi-location installations)
RD-RD-XX Remote Dimmer (120 V~)
RD-RS-XX
RD-RD-277-XX
RD-RS-277-XX
Remote Switch (120 V~)
Remote Dimmer (277 V~) (for use with -F6AN-DV only)
Remote Switch (277 V~) (for use with -8S-DV only)
Color Change Kits
RK-D-XX
RK-S-XX
RK-AD-XX
RK-AS-XX
RK-F-XX
Dimmer (-6CL, -6D, -10D, -10ND, -6NA, -F6AN-DV)
Switche (-8ANS and -8S-DV)
Remote Dimmer (-RD)
Remote Switche (-RS)
Fan Speed Control (-2ANF)
* Go to www.lutron.com/LEDtool to see all compatible CFL/LED lamps.
Note: “XX” in the model number represents color/finish code. See Colors and Finishes at end of document.
02.21.14
www.lutron.com
2 Technical Support — 800.523.9466 (USA)
product specifications
369225j 02.21.14
RadioRA
®
2 Maestro
®
Local Controls
Specifications
Model Numbers Dimmer: RRD-6CL, RRD-6D, RRD-10D, RRD-10ND, RRD-6NA, RRD-F6AN-DV
Switch: RRD-8ANS, RRD-8S-DV
Fan Speed Control: RRD-2ANF
Remote: RD-RD, RD-RS, RD-RD-277, RD-RS-277
Power 120 V~ 50/60 Hz: -6CL, -6D, -10D, -10ND, -6NA, -2ANF, -8ANS, -RD, -RS
120 – 277 V~ 50 / 60 Hz: -F6AN-DV, -8S-DV
277 V~ 50/60 Hz: -RD-277, -RS-277
Typical Power
Consumption
Regulatory
Approvals
Environment
Dimmer/Switch/Fan Speed Control: 0.6 W
Test conditions: load is off and nightlight mode is enabled.
Remote Dimmer/Switch: 0 W
Test conditions: load is off.
UL, CSA (all except -6CL and -6NA), cUL (-6CL and -6NA only), NOM, FCC, IC,
COFETEL, ANATEL (all except -6NA and Remotes)
Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
Communications Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. Remote dimmers/switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC
Power Circuits.
Power Failure
Mounting
Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
Requires a U.S. wallbox. 3½ in (89 mm) deep recommended, 2¼ in (57 mm) deep minimum.
Wiring
Warranty
Uses conventional 3-way and 4-way wiring.
www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf
www.lutron.com
3 Technical Support — 800.523.9466 (USA)
product specifications
RadioRA
®
2 Maestro
®
Local Controls
Design Features
Dimmer
• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• Neutral and two-wire dimmers available.
Switch
• On a single-tap, lights or motors turn ON or OFF.
• Neutral and two-wire switches available.
Fan Speed Control
• On a single-tap, fan turns ON or OFF.
• Fan speeds can be selected by pressing and holding the speed control rocker until the desired fan speed is reached.
• Controls one paddle-type ceiling fan (Permanent split-capacitor motor) up to 2 A. Not for use with shaded-pole type motors (e.g., bath exhaust fans).
• Provides 4 quiet speeds plus OFF.
• Not for use with fans that have integrated fan speed and/or light control modules.
• Requires a neutral connection.
369225j 02.21.14
www.lutron.com
4 Technical Support — 800.523.9466 (USA)
product specifications
RadioRA
®
2 Maestro
®
Local Controls
Dimensions
All dimensions are shown as: in (mm)
Front View Side View Side View
-2ANF only
369225j 02.21.14
Side View
-RD-277 and
-RS-277 only
4 11 ⁄
16
(119)
2
15
⁄
16
(75)
5/16
(8)
Mounting and Parts Identification
1
1
⁄
8
(30)
5/16
(8)
1
11
⁄
16
(43)
5/16
(8)
1
3
⁄
8
(35)
Control Mounting Screws
Adapter Mounting Screws
Wallbox www.lutron.com
Control
5
Wallplate Adapter Wallplate
Wallplate Adapter / Wallplate purchased separately
Technical Support — 800.523.9466 (USA)
product specifications
369225j 02.21.14
RadioRA
®
2 Maestro
®
Local Controls
Ganging and Derating
When combining controls in the same wallbox, derating is required (see Load Type and Capacity). No derating is required for remote dimmers/switches/fan speed controls. -8ANS, -RD-277, and -RS-277 have fins that need to be removed for multigang installations.
Load Type and Capacity
Do not remove outside fins on ends of ganged controls (shaded areas)
A B B B C B
Load Type Minimum
Load
A
Not Ganged
B
End of Gang
C
Middle of Gang
Neutral
Connection
RRD-6CL
1
Inc./Hal./CFL/LED
MLV
2,3 see Mixing Lamp Types, page 8
50 W/VA 450 W/600 VA 400 W/500 VA 300 W/400 VA
No
RRD-6D
1
Inc./Hal.
MLV
2
RRD-10D
1
Inc./Hal.
MLV 2
50 W
50 W/VA 450 W/600 VA
50 W
600 W
1000 W
500 W
400 W/500 VA 300 W/400 VA
800 W
400 W
650 W
50 W/VA 800 W/1000 VA 600 W/800 VA 500 W/650 VA
No
No
RRD-10ND
1,4
Inc./Hal.
MLV 2
10 W 1000 W 800 W 650 W
10 W/VA 800 W/1000 VA 600 W/800 VA 500 W/650 VA
Yes
RRD-6NA
1,4
Inc./Hal./ELV
MLV 2
5 W 600 W 500 W 400 W
5 W/VA 450 W/600 VA 400 W/500 VA 300 W/400 VA
Yes
1
Dimmer Load Type:
• -6D, -6ND,-10D, -10ND: designed for use with permanently-installed incandescent, magnetic low-voltage, or tungsten halogen only.
• -6CL: designed for use with permanently-installed incandescent, magnetic low-voltage, tungsten halogen, CFL, or LED only.
• -6NA: designed for use with permanently-installed incandescent, electronic low-voltage, magnetic low-voltage, or tungsten halogen only.
Note: Do not install dimmers to control receptacles or motor-operated appliances.
2
Low-Voltage Applications:
• -6CL, -6D, -6ND, -10D -10ND: use with magnetic (core and coil) low-voltage transformers only. Not for use with electronic (solid-state) low-voltage transformers.
• -6NA: use with electronic (solid-state) or magnetic (core and coil) transformers; do not mix ELV and MLV load types on a single control.
Operation of a low-voltage circuit with lamps inoperative or removed may result in transformer overheating and premature failure. Lutron strongly recommends the following:
• Do not operate low-voltage circuits without operative lamps in place.
• Replace burned-out lamps as soon as possible.
• Use transformers that incorporate thermal protection or fused transformer primary windings to prevent transformer failure due to
3 overcurrent.
Do not mix CFL and LED loads with MLV loads.
4
Power Boosters / Load Interfaces: -6ND, -10ND, -6NA can be used to control power boosters / load interfaces. For a list of compatible power boosters / load interfaces see Compatible Power Boosters and Load Interfaces, page 8.
www.lutron.com
6 Technical Support — 800.523.9466 (USA)
product specifications
369225j
RadioRA
®
2 Maestro
®
Local Controls
Load Type and Capacity
(continued)
Do not remove outside fins on ends of ganged controls (shaded areas)
A B B B C B
02.21.14
Load Type Minimum
Load
A
Not Ganged
2 A
B
End of Gang
RRD-F6AN-DV
1,2,3
Fluor./LED 0.05 A 6 A 5 A
1 ballast 60 ballasts 50 ballasts
RRD-2ANF
4
Ceiling Fan 0.083 A 2 A
3.5 A
2 A
C
Middle of Gang
35 ballasts
Neutral
Connection
Yes
Yes
RRD-8ANS
1,5
Lighting
Motor
10 W
0.08 A
8 A 6.5 A
1/4 HP 5.8 A 1/4 HP 5.8 A
5 A
1/6 HP 4.4 A
Yes
RRD-8S-DV
5,6
Lighting
Motor
40 W/VA 8 A
0.4 A 1/10 HP 3 A
8 A (2-gang); 7 A (3-gang) 7 A No
1
Note: Do not install dimmers to control receptacles or motor-operated appliances.
Power Boosters / Load Interfaces: -F6AN-DV, -8ANS can be used to control power boosters / load interfaces. For a list of compatible power
2 boosters / load interfaces see Compatible Power Boosters and Load Interfaces, page 8.
Fluorescent Dimmer Load Type:
• -F6AN-DV: designed for use with permanently installed 3-wire 120 V~ or 277 V~ line voltage control fluorescent ballasts or LED drivers.
Use with only Hi-lume
®
, Hi-lume
®
3D, Compact SE
TM
, Eco-10
®
, or EcoSystem
®
(H3D-, FDB-, ECO-, HL3-, EC5-, L3D). Do NOT use with
3 any other ballasts or drivers. Do not install to control receptacles or motor-operated appliances.
Maximum Load: The maximum load for the -F6AN-DV is either the derated load or the number of ballasts, whichever is LESS.
4
Ceiling Fan Application: -2ANF
• Use to control one paddle-type ceiling fan (permanent split-capacitor).
• Use the ceiling fan’s pull chain to set its speed to the highest setting.
• Do not use to control fans that use shaded-pole motors (e.g., bath exhaust fans).
• Do not use to control fans that have integrated fan speed controls (e.g., fans that have a remote control), unless the integrated control is removed from the ceiling fan.
• Do not connect to any other motor-operated appliance or to any lighting load type.
5
• Do not use to control a fan lighting load (e.g., light kit).
Switch Load Type:
• -8ANS and -8S-DV: designed for use with permanently installed 120 V~ incandescent, magnetic low-voltage, electronic low-voltage, tungsten halogen, fluorescent, CFL, LED, or motor loads.
6
• -8S-DV can also be used with permanently installed 277 V~ magnetic low-voltage or fluorescent loads.
Shunt Capacitor: Some -8S-DV installations may require the use of a shunt capacitor; this is especially necessary for load types sensitive to leakage current (e.g., fluorescent ballasts). If load flickers, install a shunt capacitor. Optional shunt capacitor must be installed inside the load fixture or in a separate J-box. For shunt capacitor installation see Wiring Diagram 4, 9, or 10.
www.lutron.com
7 Technical Support — 800.523.9466 (USA)
product specifications
369225j 02.21.14
RadioRA
®
2 Maestro
®
Local Controls
Mixing Lamp Types
Mixing lamp types (using a combination of CFL/LED, and Incandescent/Halogen bulbs) and ganging with other dimmers or electronic switches may reduce maximum wattage as shown in the chart below.
Example: If fins from one side of dimmer are removed and you have two 24 W bulbs installed (total
CFL Wattage = 48 W), you may add up to 300 W of incandescent or halogen lighting.
Do not remove outside fins on ends of ganged controls (shaded areas)
A B B B C B
Total CFL/LED Wattage Total Incandescent/Halogen Wattage
A
Not Ganged
B
End of Gang
C
Middle of Gang
Neutral
Connection
RRD-6CL
1,2
0 W
1 W – 25 W
26 W – 50 W
51 W – 75 W
76 W – 100 W
101 W – 125 W
126 W – 150 W
+ 50 W – 600 W Or 50 W – 500 W Or 50 W – 400 W
+ 0 W – 500 W Or 0 W – 400 W Or 0 W – 300 W
+ 0 W – 400 W Or 0 W – 300 W Or 0 W – 200 W
+ 0 W – 300 W Or 0 W – 200 W Or 0 W – 100 W
+ 0 W – 200 W Or 0 W – 100 W Or 0 W – 50 W
+ 0 W – 100 W Or 0 W – 50 W
+ 0 W Or 0 W
Or 0 W
Or 0 W
No
1
Dimmer Load Type -6CL is designed for use with permanently-installed incandescent, CFL, LED, or tungsten halogen only. Do not install
2 dimmers to control receptacles or motor-operated appliances.
Do not mix CFL and LED loads with MLV loads.
Compatible Power Boosters and Load Interfaces
Some local controls can be used to control power boosters or load interfaces. Up to three power boosters or load interfaces can be used with one control. See table below for a list of controls and compatible power boosters and load interfaces.
Control Phase Adaptive
Power Modules:
PHPM-PA-120-WH;
PHPM-PA-DV-WH
3-wire Fluorescent
Power Modules:
PHPM-3F-120-WH;
PHPM-3F-DV-WH
Switched Power
Module:
PHPM-SW-DV-WH
0 – 10 V Interface and
Switching Module:
GRX-TVI
RRD-10ND
RRD-6NA
RRD-F6AN-DV
1
RRD-8ANS
preferred
1
Only the GRX-TVI is compatible with the RRD-F6AN-DV at 277 V~. All other power modules are 120 V~ only.
www.lutron.com
8 Technical Support — 800.523.9466 (USA)
product specifications
369225j
RadioRA
®
2 Maestro
®
Local Controls
Operation
Dimmer
Status LEDs
(not on Remote Dimmers)
Indicate light level; glow softly as night light when light is off
Tapswitch
Tap on / off
Dimming Rocker
Press to brighten
Press to dim
FASS
TM
Front Accessible Service Switch
02.21.14
Switch
Status LED
(not on Remote Switches)
Indicates load status; glows softly as night light when light is off
Tapswitch
Tap on/off
Fan Speed Control
www.lutron.com
FASS
TM
Front Accessible Service Switch Or
OFF ON
OFF ON
RD-277 and
RS-277 only
Status LEDs
Indicate speed level; glow softly as night light when fan is off
Tapswitch
Tap on / off
Speed Control Rocker
Press to increase speed
Press to decrease speed
FASS
TM
Front Accessible Service Switch
Important Notice
FASS
TM
: Front Accessible
Service Switch
To replace bulb, remove power by pulling the FASS
TM
switch out fully on all controlling devices.
After replacing bulb(s), push the
FASS
TM
switch(es) back in fully to restore power to the control(s).
9 Technical Support — 800.523.9466 (USA)
product specifications
369225j 02.21.14
RadioRA
®
2 Maestro
®
Local Controls
Wiring Diagrams
Wiring Diagram 1
Single-Location Installation without Neutral
1
-6CL, -6D, -10D
Wiring Diagram 2
Single-Location Installation with Neutral
1
-10ND, -6NA, -2ANF, -8ANS
Dimmer
Brass
Black
Hot/Live
120 V~
50/60 Hz
Blue 1
Green
Load
Dimmer/Switch/Fan Speed Control
Brass
Silver
Black
Hot/Live
Blue 1
Green
120 V~
50/60 Hz
Load
Ground Ground
Neutral Neutral
Wiring Diagram 3
Single-Location Fluorescent Dimmer Installation
1
-F6AN-DV with Lutron
®
Ballast/LED Driver
Dimmer
Brass
Silver
Black
Hot/Live
Blue 1
Orange
Black
Orange
White
Lutron
®
Ballast/LED
Driver
Green
120 –277 V~
50/60 Hz
Ground
Black
Orange
White
Lutron
®
Ballast/LED
Driver
Neutral
Wiring Diagram 4
Single-Location 2-Wire Switch Installation
1
-8S-DV with optional Shunt Capacitor
2
Switch
Brass Blue 1
Black
Hot/Live
Optional
Green
120 –277 V~
50/60 Hz
Load
Shunt
Capacitor
2
Ground
Neutral
Note: Bolded lines in diagrams indicate leads on products.
1
When using controls in single-location installations, tighten the blue terminal. Do not connect the blue terminal to any other wiring or to ground.
2
Optional Shunt Capacitor must be installed inside the load fixture or in a separate J-box. Shunt capacitor is included with 8S-DV.
Continued on next page...
www.lutron.com
10 Technical Support — 800.523.9466 (USA)
product specifications
RadioRA
®
2 Maestro
®
Local Controls
Wiring Diagrams
(continued)
Wiring Diagram 5
Multi-Location Installation without Neutral
1
-6CL, -6D, and -10D with RD-RD
Remote Dimmer or Dimmer
Remote Dimmer or Dimmer
Dimmer or
Remote Dimmer
369225j 02.21.14
Note: Dimmer can be installed in any location in the circuit.
Brass
Black
Blue Brass
Black
Blue Brass
Black
Blue
Hot/Live
Green Green Green
120 V~
50/60 Hz
Load
Ground Ground Ground
Neutral
Wiring Diagram 6
Multi-Location Installation with Neutral
1,2
-10ND, -6NA, and -2ANF with RD-RD; -8ANS with RD-RS
Remote Dimmer or Remote Switch
Remote Dimmer or Remote Switch
Dimmer/Switch/Fan Speed
Control 2
Brass
Black
Blue Brass
Black
Blue Brass
Silver
Black
Blue
Hot/Live
Green Green Green
120 V~
50/60 Hz
Load
Ground Ground Ground
Neutral
Note: Bolded lines in diagrams indicate leads on products.
1
Up to 9 RadioRA
®
2 Remote Dimmers/Remote Switches/Fan Speed Controls may be connected to the RadioRA
®
2 Dimmer/Switch.
2
Total blue terminal wire length may be up to 250 ft (76 m).
Neutral-Wire Dimmers/Switches/Fan Speed Controls must be connected on the Load side of a multi-location installation.
Continued on next page...
www.lutron.com
11 Technical Support — 800.523.9466 (USA)
product specifications
RadioRA
®
2 Maestro
®
Local Controls
Wiring Diagrams
(continued)
Wiring Diagram 7
Multi-Location Fluorescent Dimmer Installation
1,2
(120 V~)
-F6AN with RD-RD and Lutron
®
Ballast/LED Driver
Remote Dimmer Remote Dimmer Dimmer
2
369225j
Brass
Black
Blue Brass
Black
Blue Brass
Silver
Black
Blue
Orange
Hot/Live
Green Green Green
120 V~
50/60 Hz
Ground Ground Ground
Neutral
Wiring Diagram 8
Multi-Location Fluorescent Dimmer Installation
1,2
(277 V~)
-F6AN with RD-RD-277 and Lutron
®
Ballast/LED Driver
Remote Dimmer Remote Dimmer Dimmer
2
02.21.14
Black
Orange
White
Lutron
®
Ballast/LED
Driver
Black
Orange
White
Lutron
®
Ballast/LED
Driver
Hot/Live
277 V~
50/60 Hz
Red
Black
Blue Red
Black
Green
Blue Brass
Silver
Black
Green
Blue
Orange
Green
Black
Orange
White
Lutron
Driver
®
Ballast/LED
Ground Ground Ground
Black
Orange
White
Lutron
Driver
®
Ballast/LED
Neutral
Note: Bolded lines in diagrams indicate leads on products.
1
Up to 9 RadioRA
®
2 Remote Dimmers/Remote Switches/Fan Speed Controls may be connected to the RadioRA
®
2 Dimmer/Switch.
2
Total blue terminal wire length may be up to 250 ft (76 m).
Neutral-Wire Dimmers/Switches/Fan Speed Controls must be connected on the Load side of a multi-location installation.
Continued on next page...
www.lutron.com
12 Technical Support — 800.523.9466 (USA)
product specifications
369225j 02.21.14
RadioRA
®
2 Maestro
®
Local Controls
Wiring Diagrams
(continued)
Wiring Diagram 9
Multi-Location 2-Wire Switch Installation
1
(120 V~)
-8S-DV with RD-RS and optional Shunt Capacitor
Remote Switch or Switch
Remote Switch or Switch
Switch or
Remote Switch
Note: Switch can be installed in any location in the circuit.
Brass
Black
Blue Brass
Black
Blue Brass
Black
Blue
Hot/Live
Optional
Green Green Green
120 V~
50/60 Hz
Load
Shunt
Capacitor
2
Ground Ground
Neutral
Wiring Diagram 10
Multi-Location 2-Wire Switch Installation
1
(277 V~)
-8S-DV with RD-RS-277 and optional Shunt Capacitor
Remote Switch or Switch
Remote Switch or Switch
Ground
Switch or
Remote Switch
Note: Switch can be installed in any location in the circuit.
Hot/Live
Red/Brass
Black
Blue Red/Brass
Black
Blue Brass/Red
Black
Blue
Optional
Green Green Green
277 V~
50/60 Hz
Load
Shunt
Capacitor
Ground Ground Ground
Neutral
Note: Bolded lines in diagrams indicate leads on products.
1
Up to 9 RadioRA
®
2 Remote Dimmers/Remote Switches/Fan Speed Controls may be connected to the RadioRA
®
2 Dimmer/Switch.
2
Total blue terminal wire length may be up to 250 ft (76 m).
Optional Shunt Capacitor must be installed inside the load fixture or in a separate J-box. Shunt capacitor is included with 8S-DV.
2 www.lutron.com
13 Technical Support — 800.523.9466 (USA)
product specifications
RadioRA
®
2 Maestro
®
Local Controls
Colors and Finishes
Gloss Finishes Satin Finishes
369225j 02.21.14
White
WH
Ivory
IV
Hot
HT
Merlot
MR
Plum
PL
Turquoise
TQ
Almond
AL
Light Almond
LA
Taupe
TP
Eggshell
ES
Biscuit
BI
Snow
SW
Gray
GR
Brown
BR
Palladium
PD
Midnight
MN
Sienna
SI
Terracotta
TC
Black
BL
Greenbriar
GB
Bluestone
BG
Mocha Stone
MS
Goldstone
GS
• Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors.
• Color chip keychains are available for more precise color matching:
Gloss Finishes: DG-CK-1
Satin Finishes: SC-CK-1
Desert Stone
DS
Stone
ST
Limestone
LS
Metal Finish
(wallplate only)
When using Stainless Steel wallplates, it is recommended that you order the controls in Midnight (MN).
Stainless Steel
SS www.lutron.com
14 Technical Support — 800.523.9466 (USA)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project