31 Troubleshooting Phone View in Cisco Unity Connection 9.x

31 Troubleshooting Phone View in Cisco Unity Connection 9.x
CH A P T E R
31
Troubleshooting Phone View in Cisco Unity
Connection 9.x
The Phone View feature is supported only with Cisco Unified Communications Manager phone system
integrations.
The Phone View feature may not function correctly outside a firewall or through a VPN router.
Requirements for Phone View are available in the “Requirements for Cisco Unity Connection Phone
View” section of System Requirements for Cisco Unity Connection Release 9.x, available at
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/requirements/9xcucsysreqs.html.
See the following sections:
•
Problems with Phone View in Cisco Unity Connection 9.x, page 31-1
•
Using Traces to Troubleshoot Phone View Issues in Cisco Unity Connection 9.x, page 31-3
Problems with Phone View in Cisco Unity Connection 9.x
Use the troubleshooting information in this section if an error message appears when the user attempts
to use Phone View. Consider the following possible causes:
•
The application user is configured incorrectly. See the “Application User Is Configured Incorrectly”
section on page 31-1.
•
The user phone configuration is not correct. See the “User Phone Configuration Is Not Correct”
section on page 31-2.
•
The phone system integration is configured incorrectly. See the “Phone System Integration Is
Configured Incorrectly” section on page 31-2.
Application User Is Configured Incorrectly
The problem may be caused by the incorrect configuration of the application user on the Cisco Unified
Communications Manager server.
Do the following procedure to verify the configuration of the application user.
Troubleshooting Guide for Cisco Unity Connection Release 9.x
31-1
Chapter 31
Troubleshooting Phone View in Cisco Unity Connection 9.x
Problems with Phone View in Cisco Unity Connection 9.x
To Verify the Configuration of the Application User
Step 1
In Cisco Unified Communications Manager Administration, on the User Management menu, select
Application User.
Step 2
On the Find and List Application Users page, select Find.
Step 3
Select the user ID of the application user that is used by Phone View.
Step 4
On the Application User Configuration page, under Application User Information, select Edit
Credential.
Step 5
On the Credential Configuration page, confirm that the following check boxes are checked:
•
User Must Change at Next Login
•
Does Not Expire
Step 6
Select Save.
Step 7
In the Related Links box, select Back to User and select Go.
Step 8
On the Application User Configuration page, under Application User Information, in the Password field,
reenter the password.
Step 9
In the Confirm Password field, reenter the password.
Step 10
Under Device Information, in the Controlled Devices field, confirm that the devices that are associated
with the application user account are correct.
Step 11
Select Save.
Step 12
On the System menu, select Enterprise Parameters.
Step 13
On the Enterprise Parameters Configuration page, under Phone URL Parameters, in the URL
Authentication field, confirm that the URL is correct.
Step 14
If you made any changes, select Save.
User Phone Configuration Is Not Correct
One possible cause may be that the configuration on the user phone is not current. You can reboot the
phone so that it reloads the configuration from the Cisco Unified CM server.
Another possible cause is that the user phone is not supported. See the “Requirements for Cisco Unity
Connection Phone View” section of System Requirements for Cisco Unity Connection Release 9.x,
available at
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/requirements/9xcucsysreqs.html.
Phone System Integration Is Configured Incorrectly
The problem may be caused by the incorrect configuration of the Cisco Unified CM phone system
integration in Cisco Unity Connection Administration.
Do the following procedures.
Troubleshooting Guide for Cisco Unity Connection Release 9.x
31-2
Chapter 31
Troubleshooting Phone View in Cisco Unity Connection 9.x
Using Traces to Troubleshoot Phone View Issues in Cisco Unity Connection 9.x
To Verify the Configuration of the Cisco Unified Communications Manager Phone System Integration
Step 1
In Cisco Unity Connection Administration, expand Telephony Integrations, then select Phone System.
Step 2
On the Search Phone Systems page, select the name of the phone system.
Step 3
On the Phone System Basics page, under Phone View Settings, confirm that the Enable Phone View
check box is checked.
Step 4
In the CTI Phone Access Username field, confirm that the name of the application user in Cisco
Unified CM Administration is correct.
Note that the name of the application user is case-sensitive.
Step 5
In the CTI Phone Access Password field, reenter the password of the application user in Cisco
Unified CM Administration.
Step 6
Select Save.
To Verify the Configuration of the User
Step 1
In Cisco Unity Connection Administration, expand Users, then select Users.
Step 2
On the Search Users page, select the name of the user.
Note
If the user does not appear in the search results table, set the applicable parameters in the search
fields at the top of the page, and select Find.
Step 3
On the Edit User Basics page, on the Edit menu, select Phone Menu.
Step 4
On the Phone Menu page, under Finding Messages with Message Locator, confirm that the Enable check
box is checked.
Step 5
Confirm that the Enable Phone View check box is checked.
Step 6
Select Save.
Using Traces to Troubleshoot Phone View Issues in Cisco Unity
Connection 9.x
You can use traces to troubleshoot Phone View issues. For detailed instructions on enabling the
applicable traces and viewing the trace logs, see the “Diagnostic Traces in Cisco Unity Connection 9.x”
chapter.
Troubleshooting Guide for Cisco Unity Connection Release 9.x
31-3
Chapter 31
Using Traces to Troubleshoot Phone View Issues in Cisco Unity Connection 9.x
Troubleshooting Guide for Cisco Unity Connection Release 9.x
31-4
Troubleshooting Phone View in Cisco Unity Connection 9.x
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising