Channel Vision B-201 Specification

Channel Vision B-201 Specification
1 Camera Passive Video Balun
Channel Vision’s 1 Camera CAT5 Passive Video Balun provides the necessary impedance transformation to
transition from 75 ohm coax to twisted pair cabling. It is a great way to deliver video from a video surveillance
camera when you only have a twisted pair run to the camera location and no coax. The low cost, simplicity,
and availability of twisted pair cable makes the B-201 a convenient choice for both new construction and
retro-fit applications.
Sends video over 1,000 ft. of twisted pair
(1,000 ft Max transmission distance)
Compatible with Category 5, 5e, 6 wiring
Small size allows installation in crowded spaces
Video In/Out: BNC Male Connector
Video Format: RS170, NTSC, CCIR or SECAM
Surge Suppression: 6,000V
Transmission Distance: Max 1,000ft.
Operation Frequency Range: 0 to 6MHz
Twisted Pair Connector: Two screw terminals
Common Mode Rejection: 60dB
Wire Type: 1-pair, UTP Category 5, 5e or 6
Dimensions: 1.26” x 0.83” x 0.59”
32mm x 21mm 15mm
*Specifications subject to change
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF