VAR-IP-w8-1 White Light Network Illuminator Specification Text A&E 65m to 220m (148ft to 492ft) illumination distance 10° to 120° illumination angle GENERAL A. The White Light Network Illuminator shall be a solid state LED device utilizing SMT (Surface Mount Technology) light intensification miniature optics, with current controlled LED’s providing at least 10 years illumination life (44,000hrs night time use). B. The Network Illuminator shall be powered from a 12/24V AC/DC power supply. C. The Network Illuminator shall include an adjustable photocell for automatic on/off operation, and a telemetry control input for remote operation. D. The Network Illuminator shall provide a photocell-following output. E. The LED Network Illuminator shall be vandal resistant and manufactured using high impact polycarbonate lensing and shall incorporate an aluminum extruded heat sink to aid LED life expectancy. F. The Network Illuminator shall have an IP66 rating as a minimum. G. The Network Illuminator shall have an operational temperature range between -50 to 50˚C (58 to 122°F). H. The Network Illuminator shall make use of hot-spot reduction (HRT) technology. I. The Network Illuminator shall make use of interchangeable diffuser-lenses permitting illumination angles of 10°x10°, 35°x10°, 60°x25°, 80°x50°, 120°x80° from a single unit and custom diffuser-lenses as an option. J. The Network Illuminator shall support standard IP protocols. K. The Network Illuminator should have a Discovery Tool available to find and connect to all illuminators on the network. L. The Network Illuminator shall have a built in Web Server Service to allow for peer to peer control of lights within a group on a network without the requirement of a PC or other service running M. The Network Illuminator shall support open architecture best practices with a published API available to third-party network video cameras and management systems. VAR-IP-w8-1 White Light Network Illuminator Specification Text A&E 65m to 220m (148ft to 492ft) illumination distance 10° to 120° illumination angle N. The Network Illuminator shall use a standard Web browser interface permitting remote adjustment of the following parameters and functions: a. Manual Override control with adjustable power (Dim) and Duration, complete with Boost and Deterrent options. b. Photocell trigger on with Power and Duration Select – adjustable from 20-100% power using a slide adjustment complete with soft start. Timer duration up to 12 hours c. Telemetry trigger on with Power and Duration Select – adjustable from 20-100% power using a slide adjustment complete with soft start. Timer duration up to 12 hours d. Photocell Sensitivity Adjust – 0-100% using a slide adjustment e. Photocell Disable f. Restore Factory Defaults g. Full diagnostics including status of LED's and input voltage and current state of the lamp h. Network Illuminator shall be capable of firmware upgrades through a network using a software-based device utility or web browser i. The ability to set up groups of lamps with the same operating parameters j. Change password VAR-IP-w8-1 White Light Network Illuminator Specification Text A&E 65m to 220m (148ft to 492ft) illumination distance 10° to 120° illumination angle TECHNICAL SPECIFICATIONS A. The Network Illuminator shall meet or exceed the following specifications: a. Max. lighting distance: 150m (492ft) b. Angle of Illumination: 10, 35, 60, 80, 120 degrees c. Surface mount technology LED’s Optics: d. Maximum consumption: 48 watts e. Power input : 12/24V AC/DC f. RJ-45 for 100Base-TX, Auto MDI/MDI-X Port g. Weight: 1.65kg (3.6lbs) h. Supported Protocols TCP/IP, UDP/IP (unicast, multicast IGMP), DNS, DHCP, IPv4,v2/v3, i. Security Access Password Protected j. Software Interface Web browser control and set up k. Open IP Integration Raytec LoIP API l. Ingress Protection Rating: IP66 m. Operating Temperature: -50°C à + 50⁰C (-58 to 122°F) n. Wavelength: White Light o. Dimensions: 135mm x 180mm x 68.2mm (5” x 7” x 3.2”) B. The Network Illuminator shall be covered by a manufacturer’s warranty of 5 years from the date of purchase. C. The White Light Network Illuminator shall be the VAR – IP-w8-1 manufactured by Raytec or an approved equivalent.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project