Upgrade

Upgrade
Upgrade
• Upgrade Cisco Jabber for Windows, page 1
• Upgrade Cisco UC Integration™ for Microsoft Lync, page 1
• Upgrade the Citrix Receiver or the VMware Client, page 2
• Change the Hosted Virtual Desktop Connection Type, page 2
• Uninstall Cisco VXME Client, page 3
Upgrade Cisco Jabber for Windows
Use this procedure to upgrade to a supported maintenance release of Cisco Jabber for Windows. For supported
Cisco Jabber versions, see the "System Requirements" section in the Release Notes for Cisco Virtualization
Experience Media Engine for Windows for your release.
Procedure
Step 1
Step 2
Close Cisco Jabber and ensure that it is not running on the HVD.
Important
If Cisco Jabber is running during the installation, exit and restart Cisco Jabber to enable
virtualization.
Install Cisco Jabber.
Upgrade Cisco UC Integration™ for Microsoft Lync
Use this procedure to upgrade to a supported maintenance release of Cisco UC Integration™ for Microsoft
Lync. For supported Cisco UC Integration™ for Microsoft Lync versions, see the "System Requirements"
section in the Release Notes for Cisco Virtualization Experience Media Engine for Windows for your release.
Procedure
Step 1
Close Cisco UC Integration™ for Microsoft Lync and ensure that it is not running on the HVD.
Deployment and Installation Guide for Cisco Virtualization Experience Media Engine for Windows Release 10.6
1
Upgrade
Upgrade the Citrix Receiver or the VMware Client
If Cisco UC Integration™ for Microsoft Lync is running during the installation, exit and restart
Cisco UC Integration™ for Microsoft Lync to enable virtualization.
Install Cisco UC Integration™ for Microsoft Lync.
Important
Step 2
Upgrade the Citrix Receiver or the VMware Client
If you upgrade the Citrix Receiver or the VMware Horizon Client, and Cisco VXME Client is already installed,
perform this procedure to repair Cisco VXME Client.
Before You Begin
Upgrade the Citrix Receiver or the VMware Horizon Client. See the documentation for your Citrix or VMware
product.
Procedure
Step 1
Step 2
Step 3
Step 4
Double click the file.
To open the executable file, select OK.
If the Open File - Security Warning appears, select Run.
In the Welcome window, select Next.
Step 5
In the Program Maintenance window, select Repair and then Next.
Step 6
Step 7
To proceed with repairing the installation, select Install.
To complete the installation, select Finish.
Change the Hosted Virtual Desktop Connection Type
Use this procedure if Cisco VXME Client is already installed and you change the connection type as follows:
• Citrix Receiver to VMware Horizon Client
• VMware Horizon Client to Citrix Receiver
Before You Begin
Install the software for the new connection type, either Citrix Receiver or VMware Horizon Client.
Deployment and Installation Guide for Cisco Virtualization Experience Media Engine for Windows Release
10.6
2
Upgrade
Uninstall Cisco VXME Client
Procedure
Step 1
Step 2
Step 3
Double click the CiscoVXMEClientSetup.msi file.
To open the executable file, select OK.
Step 4
If the Open File–Security Warning appears, select Run.
In the Welcome window, select Next.
Step 5
In the Program Maintenance window, select Modify and then Next.
Step 6
In the Custom setup window, select Citrix Client Support or VMware Client Support depending on which
you installed and select Next.
Step 7
Step 8
Step 9
To proceed with modifying the installation, select Install.
Note
During the modification of Cisco VXME Client, only components that were installed with the previous
version are reinstalled.
To complete the installation, select Finish.
Uninstall Cisco VXME Client
You can use the command line to uninstall Cisco VXME Client for Windows.
Tip
Alternately, you can use the Windows Control Panel to remove Cisco VXME Client for Windows.
Before You Begin
The Cisco VXME Client for Windows Microsoft Installer (MSI) file must be present in the file system.
Procedure
Step 1
Step 2
Open a command window.
Enter the following command: msiexec.exe /x <path to MSI>\CiscoVXMEClientSetup.msi /quiet.
The /quiet switch specifies a silent installation.
Deployment and Installation Guide for Cisco Virtualization Experience Media Engine for Windows Release 10.6
3
Upgrade
Uninstall Cisco VXME Client
Deployment and Installation Guide for Cisco Virtualization Experience Media Engine for Windows Release
10.6
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising