6 Reporting Introduction

6 Reporting Introduction
CH A P T E R
6
Reporting
Revised: July 12, 2011, OL-25219-01
Introduction
This chapter describes how a user can run interactive report, save and share report, schedule recurring
reports, view and customize a dashboard or share results.
This chapter contains the following sections:
•
SCE Reports, page 6-2
•
ASR1K Reports, page 6-24
•
Running Reports, page 6-28
•
My Favorites, page 6-44
•
Report Gallery, page 6-47
•
Scheduled Reports, page 6-50
Cisco Insight Reporter provides a series of actions allowing users to run interactive reports, save and
share report definitions, schedule recurring reports, view and customize a dashboard or share results.
It significantly enhances the application usability because users are gradually driven to their preferred
reporting information. The wizard guides you through a step-by-step procedure where all mandatory and
optional parameters can be populated, then you can run, schedule, or save your report.
This new approach has several benefits:
•
It hides the complexity of the original template, structured as a list of report groups, each based on
specific traffic tables.
•
It reduces the redundancy of similar reports spread across the template.
•
It creates a friendly interface for operators not having a deep knowledge of the SCE or ASR1K
environments.
To access and display the report parameters, click the Report Wizard icon on the module launcher.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-1
Chapter 6 Reporting
SCE Reports
SCE Reports
The SCE report topics are organized in the following report groups:
•
P2P Group, page 6-2
•
Traffic Monitoring Group, page 6-2
•
Traffic Discovery Group, page 6-25
•
Video, page 6-15
•
VoIP, page 6-17
•
Web, page 6-19
•
Malicious Traffic, page 6-22
P2P Group
The P2P group presents some statistics about peer-to-peer traffic.
P2P reports cannot be generated using data collected from the SCE platform running in Asymmetric
Routing Classification mode.
Consumers
The Consumers group includes the following report topics:
Report Metrics
Report Topic Name
Description
Top
Top P2P Consumers
For a given time frame, shows the most popular P2P
consumers for selected domains ordered by traffic volume.
Top
Top P2P Downloader
For a given time frame, shows the most popular P2P
download consumers.
Top
Top P2P Uploaders
For a given time frame, shows the most popular P2P
upload consumers.
Protocols
The Protocols group includes the following report topics:
Report Topic Name
Description
Top P2P Protocols
For a given time frame, shows the most popular
P2P protocols for selected domains ordered by
traffic volume.
Traffic Monitoring Group
CMTS/VLinks
The CMTS/VLinks group of report topics provides statistics of bandwidth or volume of traffic used by
a virtual link. The reports are provided per service usage counter for the total volume used by the virtual
link. The volume consumption can be displayed per service for the virtual link.
Cisco Insight Reporter v3 User Guide
6-2
OL-25219-01
Chapter 6 Reporting
Traffic Monitoring Group
The reports cannot be generated using data collected from an SCE platform running in Asymmetric
Routing Classification mode.
The CMTS/VLinks group includes the following report topics:
Report Metrics
Report Topic Name
Description
Bandwidth
Daily peak BW for VLinks
For a given time frame, shows the value
per day of the maximum one-hour to
two-hour bandwidth for specific VLinks.
Top VLinks by Volume
Top VLinks by Usage Volume
For a given time frame, shows the most
popular VLinks ordered by volume.
Active Subscribers
Total Active Subscribers per
VLink
For a given time frame, shows the daily or
weekly average trend for the total number
of active subscribers for the selected
VLink.
Top Services by Volume VLink Aggregated Usage
Volume per Service
For a given time frame, shows the
aggregated usage volume per service for
the selected VLink.
Bandwidth
VLink Bandwidth per Package
For a given time frame, shows the
distribution of bandwidth between the
different packages for the selected VLink.
Bandwidth
VLink Bandwidth per Service
For a given time frame, shows the
distribution of bandwidth between the
different services for the selected VLink.
Volume
VLink Daily Usage Volume per For a given time frame, shows the daily
Service
volume distribution between the different
services for the selected VLink.
Volume
VLink Hourly Usage Volume
per Service
Bandwidth
VLink BW per Cable-Modems For a given time frame, shows the
group
distribution of bandwidth between the
different cable-modems group for the
selected VLink.
For a given time frame, shows the hourly
volume distribution between the different
services for the selected VLink.
Demographic Data
The Demographic Data group includes the following reports:
Report Metrics
Report Topic Name
Description
Active Subscribers
Total Active Subscribers
Shows the daily or weekly average trend
in total number of active subscribers.
Cumulative
Distributions
Cumulative Distribution of
Subscriber Usage
For a given time frame, show a list of
subscriber consumption.
Cumulative
Distributions
Subscribers Average
Consumption
For a given time frame, shows a list of
subscriber consumption.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-3
Chapter 6 Reporting
Traffic Monitoring Group
Global
The Global group provides statistics about the traffic bandwidth or volume that was consumed. The
bandwidth or volume consumption can be displayed per service for the entire link.
The Global group includes the following reports:
Report Metrics
Report Topic Name
Description
Active Subscribers
Global Active
Subscribers per Service
For a given time frame, shows the distribution of
Active Subscribers between the different services
defined in the system.
Active Subscribers
Global Active
For a given time frame, shows the distribution of
Subscribers per Topology Active Subscribers between the different
topologies defined in the system.
Active Subscribers
Package Active
Subscriber per Service
For a given time frame, shows the distribution of
Active Subscribers between the different services
defined in the system for all subscribers belonging
to a particular package.
Active Subscribers
Package Active
Subscriber per Topology
For a given time frame, shows the distribution of
Active Subscribers between the different
topologies defined in the system for all
subscribers belonging to a particular package.
Active Subscribers
Package Active
Subscriber Comparison
For a given time frame, shows the active
subscriber comparison belonging to a particular
package.
Active Subscribers
Zone Active Subscribers
per Service
For a given time frame, shows the distribution of
Active Subscribers between the different services
defined in the system for all subscribers belonging
to a particular zone.
Active Subscribers
Zone Active Subscribers
per Topology
For a given time frame, shows the distribution of
Active Subscribers between the different
topologies defined in the system for all
subscribers belonging to a particular zone.
Active Subscribers
Zone Active Subscribers
Comparison
For a given time frame, shows the active
subscriber comparison belonging to a particular
zone.
Bandwidth
Daily peak BW for All
Packages
For a given time frame, shows the value per day of
the maximum one-hour or two-hour bandwidth
for all the packages defined in the system.
Bandwidth
Global Bandwidth per
Service vs Total
Bandwidth
For a given time frame, shows the distribution of
bandwidth of a specific service compared to the
total bandwidth.
Bandwidth
Global Bandwidth per
Service Comparison
For a given time frame, shows the global
bandwidth per service comparison.
Bandwidth
Global Bandwidth per
Service
For a given time frame, shows the distribution of
bandwidth between the different services defined
in the system.
Cisco Insight Reporter v3 User Guide
6-4
OL-25219-01
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Bandwidth
Global Bandwidth per
Topology
For a given time frame, shows the distribution of
bandwidth between the different networks defined
in the system.
Bandwidth
Global Bandwidth per
Traffic Direction
For a given time frame, shows the global
bandwidth per traffic direction.
Bandwidth
Link Daily peak BW for
All Packages
For a give time frame, shows value per day of
maximum one hour or tow hour bandwidth for
specific package define in the system.
Bandwidth
Link Bandwidth per
Service VS Total
Bandwidth
For a given time frame, shows the distribution of
bandwidth of a specific service compared to the
total bandwidth for all subscribers belonging to a
particular link
Bandwidth
Link Bandwidth per
Service comparison
For a given time frame, shows the global
bandwidth per service comparison for all the
subscribers belonging to a particular link
Bandwidth
Daily peak BW per
Package
For a given time frame, shows the value per day of
the maximum one-hour or tow-hour bandwidth
for a specific package defined in the system.
Bandwidth
Multi Package
Bandwidth per Service
For a given time frame, shows the distribution of
bandwidth between the different services defined
in the system for all subscribers belonging to the
selected packages.
Bandwidth
Package Bandwidth per
Service
For a given time frame, shows the distribution of
bandwidth between the different services defined
in the system for all subscribers belonging to a
particular package.
Bandwidth
Package Bandwidth per
Topology
For a given time frame, shows the distribution of
bandwidth between the different topologies
defined in the system for all subscribers belonging
to a particular package.
Bandwidth
Package Bandwidth
Comparison
For a given time frame, shows the bandwidth
comparison for the selected list of packages.
Bandwidth
Package Bandwidth per
Service comparison
For a given time frame, shows the global
bandwidth per service comparison for all the
subscribers belonging to a particular package.
Bandwidth
Package Bandwidth per
Traffic Direction
For a given time frame, shows the distribution of
bandwidth between the different traffic directions
defined in the system for all subscribers belonging
to a particular package.
Bandwidth
Package Bandwidth per
Service VS Total
Bandwidth
For a given time frame, shows the distribution of
bandwidth of a specific service compared to the
total bandwidth for all subscribers belonging to a
particular package
Bandwidth
Daily peak BW per Zone For a given time frame, shows the value per day of
the maximum one-hour or tow-hour bandwidth
for a specific zone defined in the system.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-5
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Bandwidth
Multi Zone Bandwidth
per Service
For a given time frame, shows the distribution of
bandwidth between the different services defined
in the system for all subscribers belonging to the
selected zones.
Bandwidth
Zone Bandwidth per
Service
For a given time frame, shows the distribution of
bandwidth between the different services defined
in the system for all subscribers belonging to a
particular zone.
Bandwidth
Zone Bandwidth per
Topology
For a given time frame, shows the distribution of
bandwidth between the different topologies
defined in the system for all subscribers belonging
to a particular zone.
Bandwidth
Zone Bandwidth
Comparison
For a given time frame, shows the bandwidth
comparison for the selected list of zones.
Bandwidth
Zone Bandwidth per
Service comparison
For a given time frame, shows the global
bandwidth per service comparison for all the
subscribers belonging to a particular zone.
Bandwidth
Zone Bandwidth per
Traffic Direction
For a given time frame, shows the distribution of
bandwidth between the different traffic directions
defined in the system for all subscribers belonging
to a particular zone.
Bandwidth
Zone Bandwidth per
Service VS Total
Bandwidth
For a given time frame, shows the distribution of
bandwidth of a specific service compared to the
total bandwidth for the subscribers belonging to a
particular zone.
Concurrent Sessions
Global Concurrent
Sessions per Service
For a given time frame, shows the distribution of
concurrent sessions between the different services
defined in the system.
Concurrent Sessions
Global Concurrent
Sessions per Topology
For a given time frame, shows the distribution of
concurrent sessions between the different
topologies defined in the system.
Concurrent Sessions
Package Concurrent
Sessions per Service
For a given time frame, shows the distribution of
concurrent sessions between the different services
defined in the system for all subscribers belonging
to a particular package.
Concurrent Sessions
Package Concurrent
Sessions per Topology
For a given time frame, shows the distribution of
concurrent sessions between the different
topologies defined in the system for all
subscribers belonging to a particular package.
Concurrent Sessions
Package Concurrent
Sessions Comparison
For a given time frame, shows the concurrent
sessions comparison for the selected list of
packages.
Concurrent Sessions
Zone Concurrent
Sessions per Service
For a given time frame, shows the distribution of
concurrent sessions between the different services
defined in the system for all subscribers belonging
to a particular zone.
Cisco Insight Reporter v3 User Guide
6-6
OL-25219-01
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Concurrent Sessions
Zone Concurrent
Sessions per Topology
For a given time frame, shows the distribution of
concurrent sessions between the different
topologies defined in the system for all
subscribers belonging to a particular zone.
Concurrent Sessions
Zone Concurrent
Sessions Comparison
For a given time frame, shows the concurrent
sessions comparison for the selected list of zones.
Duration
Global Hourly
Aggregated Minutes per
Service
For a given time frame, shows the total number of
minutes spent for services defined in the system.
Duration
Global Hourly
Aggregated Minutes per
Topology
For a given time frame, shows the total number of
minutes spent for topologies defined in the
system.
Duration
Package Hourly
Aggregated Minutes per
Service
For a given time frame, shows the total number of
minutes spent for services defined in the system
for all subscribers belonging to a particular
package.
Duration
Package Hourly
Aggregated Minutes per
Topology
For a given time frame, shows the total number of
minutes spent for topologies defined in the system
for all subscribers belonging to a particular
package.
Duration
Package Hourly
Aggregated Minutes
Comparison
For a given time frame, shows the hourly
aggregated minutes comparison for the selected
list of packages.
Duration
Zone Hourly Aggregated For a given time frame, shows the total number of
Minutes per Service
minutes spent for services defined in the system
for all subscribers belonging to a particular zone.
Duration
Zone Hourly Aggregated For a given time frame, shows the total number of
Minutes per Topology
minutes spent for topologies defined in the system
for all subscribers belonging to a particular zone.
Duration
Zone Hourly Aggregated For a given time frame, shows the hourly
Minutes Comparison
aggregated minutes comparison for the selected
list of zones.
Sessions
Global Daily Usage
Sessions per Service
For a given time frame, shows the distribution of
sessions between the different services defined in
the system.
Sessions
Global Daily Usage
Sessions per Topology
For a given time frame, shows the distribution of
sessions between the different topologies defined
in the system.
Sessions
Global Hourly Usage
Sessions per Service
For a given time frame, shows the distribution of
sessions between the different services defined in
the system.
Sessions
Global Hourly Usage
Sessions per Topology
For a given time frame, shows the distribution of
sessions between the different topologies defined
in the system.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-7
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Sessions
Package Hourly Usage
Sessions per Service
For a given time frame, shows the distribution of
sessions between the different services defined in
the system for all subscribers belonging to a
particular package.
Sessions
Package Hourly Usage
Sessions per Topology
For a given time frame, shows the distribution of
sessions between the different topologies defined
in the system for all subscribers belonging to a
particular package.
Sessions
Package Hourly Usage
Sessions Comparison
For a given time frame, shows the hourly usage
sessions comparison for the selected list of
packages.
Sessions
Zone Daily Usage
Sessions per Service
For a given time frame, shows the daily session
distribution between the different services for the
selected zone
Sessions
Zone Daily Usage
Sessions per Topology
For a given time frame, shows the daily session
distribution between the different topologies for
the selected zone.
Sessions
Zone Daily Usage
Sessions Comparison
For a given time frame, shows the daily usage
sessions comparison for the selected list of zones.
Sessions
Zone Hourly Usage
Sessions per Service
For a given time frame, shows the distribution of
sessions between the different services defined in
the system for all subscribers belonging to a
particular zone.
Sessions
Zone Hourly Usage
Sessions per Topology
For a given time frame, shows the distribution of
sessions between the different topologies defined
in the system for all subscribers belonging to a
particular zone.
Sessions
Zone Hourly Usage
Sessions Comparison
For a given time frame, shows the hourly usage
sessions comparison for the selected list of zones.
Top by Usage Volume Global Aggregated
Usage Volume per
Service
For a given time frame, shows the aggregated
distribution of volume between the different
services defined in the system.
Top by Usage Volume Global Aggregated
Usage Volume per
Topology
For a given time frame, shows the aggregated
distribution of volume between the different
topologies defined in the system.
Top by Usage Volume Package Aggregated
Usage Volume per
Service
For a given time frame, shows the most popular
services for all subscribers belonging to a
particular package.
Top by Usage Volume Package Aggregated
Usage Volume per
Topology
For a given time frame, shows the most popular
topology for all subscribers belonging to a
particular package.
Top by Usage Volume Package Aggregated
Usage Volume
Comparison
For a given time frame, shows the aggregated
usage volume comparison for the selected list of
packages.
Cisco Insight Reporter v3 User Guide
6-8
OL-25219-01
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Top by Usage Volume Zone Aggregated Usage
Volume per Service
For a given time frame, shows the most popular
services for all subscribers belonging to a
particular zone.
Top by Usage Volume Zone Aggregated Usage
Volume per Topology
For a given time frame, shows the most popular
topology for all subscribers belonging to a
particular zone.
Top by Usage Volume Zone Aggregated Usage
Volume Comparison
For a given time frame, shows the aggregated
usage volume comparison for the selected list of
zones.
Volume
Global Daily Usage
Volume per Service
For a given time frame, shows the distribution of
volume between the different services defined in
the system.
Volume
Global Daily Usage
Volume per Topology
For a given time frame, shows the distribution of
volume between the different topologies defined
in the system.
Volume
Global Hourly Usage
Volume per Service
For a given time frame, shows the distribution of
volume between the different services defined in
the system.
Volume
Global Hourly Usage
Volume per Topology
For a given time frame, shows the distribution of
volume between the different topologies defined
in the system.
Volume
Global Busy Hours
Usage Volume per
Service
For a given time frame, shows the distribution of
volume between the different services during the
busy hours.
Volume
Package Daily Usage
Volume per Service
For a given time frame, shows the distribution of
volume between the different services defined in
the system for all subscribers belonging to a
particular package.
Volume
Package Daily Usage
Volume per Topology
For a given time frame, shows the distribution of
volume between the different topologies defined
in the system for all subscribers belonging to a
particular package.
Volume
Package Daily Usage
Volume Comparison
For a given time frame, shows the daily usage
volume comparison for the selected list of
packages.
Volume
Package Hourly Usage
Volume per Service
For a given time frame, shows the distribution of
volume between the different services defined in
the system for all subscribers belonging to a
particular package.
Volume
Package Hourly Usage
Volume per Topology
For a given time frame, shows the distribution of
volume between the different topologies defined
in the system for all subscribers belonging to a
particular package.
Volume
Package Hourly Usage
Volume Comparison
For a given time frame, shows the hourly usage
volume comparison for the selected list of
packages.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-9
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Volume
Zone Daily Usage
Volume per Service
For a given time frame, shows the distribution of
volume between the different services defined in
the system for all subscribers belonging to a
particular zone.
Volume
Zone Daily Usage
Volume per Topology
For a given time frame, shows the distribution of
volume between the different topologies defined
in the system for all subscribers belonging to a
particular zone.
Volume
Zone Daily Usage
Volume Comparison
For a given time frame, shows the daily usage
volume comparison for the selected list of zones.
Volume
Zone Hourly Usage
Volume per Service
For a given time frame, shows the distribution of
volume between the different services defined in
the system for all subscribers belonging to a
particular zone.
Volume
Zone Hourly Usage
Volume per Topology
For a given time frame, shows the distribution of
volume between the different topologies defined
in the system for all subscribers belonging to a
particular zone.
Volume
Zone Hourly Usage
Volume Comparison
For a given time frame, shows the hourly usage
volume comparison for the selected list of zones.
IPv6
The IPv6 group includes the following reports:
Report Metrics
Report Topic Name
Description
IPv6/IPv4 Bandwidth IPv6 vs IPv4 Bandwidth
Comparison
Comparison
For a given time frame, shows the
bandwidth comparison between IPv6 and
IPv4 traffic.
Tunneled Active
Subscribers
For a given time frame, shows the tunneled
IPv6 active subscribers.
Tunneled IPv6 Active
Subscribers
Tunneled Average
Tunneled IPv6 Average
Subscriber Bandwidth Subscriber Bandwidth
For a given time frame, shows the tunneled
IPv6 average subscriber bandwidth.
Tunneled Concurrent
Sessions
For a given time frame, shows the tunneled
IPv6 concurrent sessions.
Tunneled IPv6 Concurrent
Sessions
Cisco Insight Reporter v3 User Guide
6-10
OL-25219-01
Chapter 6 Reporting
Traffic Monitoring Group
Link
The Link monitoring reports provides you the statistics of the links. The Link group includes the
following reports:
Report Metrics
Report Topic Name
Description
Bandwidth
Link Bandwidth per Service
For a given time frame, shows the distribution of
bandwidth between the different services for the
selected Link.
Bandwidth
Link Bandwidth per Topology For a given time frame, shows the distribution of
bandwidth between the different topologies for
the selected link.
Bandwidth
Link Bandwidth per Traffic
Direction
For a given time frame, shows the distribution of
bandwidth between the different traffic directions
for the selected VLink.
Concurrent
Sessions
Link Concurrent Sessions per
Service
For a given time frame, shows the concurrent
session distribution between the different services
for the selected link.
Concurrent
Sessions
Link Concurrent Sessions per
Topology
For a given time frame, shows the concurrent
session distribution between the different
topologies for the selected link.
Duration
Link Hourly Aggregated
Minutes per Service
For a given time frame, shows the hourly
aggregated minutes distribution between the
different services for the selected link.
Duration
Link Hourly Aggregated
Minutes per Topology
For a given time frame, shows the hourly
aggregated minutes distribution between the
different topologies for the selected link.
Sessions
Link Daily Usage Sessions per For a given time frame, shows the daily session
Service
distribution between the different services for the
selected link.
Sessions
Link Daily Usage Sessions per For a given time frame, shows the daily session
Topology
distribution between the different topologies for
the selected link.
Sessions
Link Hourly Usage Sessions
per Service
For a given time frame, shows the hourly sessions
distribution between the different services for the
selected link.
Sessions
Link Hourly Usage Sessions
per Topology
For a given time frame, shows the hourly sessions
distribution between the different topologies for
the selected link.
Top by Usage
Volume
Link Aggregated Usage
Volume per Service
For a given time frame, shows the aggregated
usage volume per service for the selected link.
Top by Usage
Volume
Link Aggregated Usage
Volume per Topology
For a given time frame, shows the aggregated
usage volume per topology for the selected link.
Top by Usage
Volume
Link Aggregated Usage
Volume Comparison
For a given time frame, shows the aggregated
usage volume comparison for the selected list of
links.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-11
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Volume
Link Daily Usage Volume per For a given time frame, shows the daily volume
Service
distribution between the different services for the
selected link.
Volume
Link Daily Usage Volume per For a given time frame, shows the daily volume
Topology
distribution between the different topologies for
the selected link.
Volume
Link Hourly Usage Volume
per Service
For a given time frame, shows the hourly volume
distribution between the different services for the
selected link.
Volume
Link Hourly Usage Volume
per Topology
For a given time frame, shows the hourly volume
distribution between the different topologies for
the selected link.
Volume
Link Busy Hours Usage
Volume per Service
For a given time frame, shows the volume
distribution between the different services for the
selected link during the busy hours.
Mobile
The Mobile group includes the following reports topics:
Report Metrics
Report Topic Name
Description
Active Subscribers
Number of subscribers per
location
For a given time frame, shows the number of
active subscribers per location.
Aggregated Usage
Usage per Device type
For a given time frame, shows the
aggregated usage per device.
Aggregated Usage
Usage per Network Type
For a given time frame, shows the
aggregated usage per network.
Aggregated Usage
Usage per APN
For a given time frame, shows the
aggregated usage per APN.
Aggregated Usage
Usage per Location
For a given time frame, shows the
aggregated usage per location.
Aggregated Usage
Usage per SGSN
For a given time frame, shows the
aggregated usage per SGSN.
Distribution
Device Type distribution
(IMEI)
Usage Volume per
Service
Application usage for specific For a given time frame, shows the
device
application usage for the selected specific
device.
Usage Volume per
Service
Application usage for Specific For a given time frame, shows the
Network Type
application usage for the selected specific
network type.
Usage Volume per
Service
Application usage for Specific For a given time frame, shows the
APN
application usage for the selected specific
APN.
Cisco Insight Reporter v3 User Guide
6-12
OL-25219-01
Chapter 6 Reporting
Traffic Monitoring Group
Service Popularity
The Service Popularity group is designed to present statistics about demographic usage of the network
(distributions, trends, etc.).
The service popularity group includes the following reports:
Report Metrics
Report Topic Name
Description
Average
Service Popularity among
Subscribers (Average)
For a given time frame, shows the distribution
of Active Subscribers between the different
services defined in the system.
Average
Service Popularity among
Subscribers of Specific
Package (Average)
For a given time frame, shows the distribution
of Active Subscribers between the different
services defined in the system for all
subscribers belonging to a particular package.
Average
Service Popularity among
Subscribers of Specific
Zone (Average)
For a given time frame, shows the distribution
of Active Subscribers between the different
services defined in the system for all
subscribers belonging to a particular zone.
Time Analysis
Service Popularity among
Subscribers
For a given time frame, shows the popularity
of a specific service against all services among
subscribers defined in the system.
Time Analysis
Service Popularity among
Subscribers of Specific
Package
For a given time frame, shows the popularity
of a specific service against all services among
subscribers defined in the system for all
subscribers belonging to a particular package.
Time Analysis
Service Popularity among
Subscribers of Specific
Zone
For a given time frame, shows the distribution
of Active Subscribers between the different
services defined in the system for all
subscribers belonging to a particular zone.
Subscribers
The Subscriber Monitoring group is designed to view statistics about the bandwidth or volume of traffic
used by SCE subscribers. The reports are provided per service usage counter for the total volume
consumed by the subscriber. The Subscribers group includes the following reports:
Report Metrics
Report Topic Name
Description
Average Bandwidth
Average Subscriber BW
For a given time frame, shows the
distribution of bandwidth between the
different services defined in the system.
Average Bandwidth
Average Subscriber BW per
Service
For a given time frame, shows the
distribution of bandwidth between the
different services defined in the system.
Average Sessions
Average Subscriber
Concurrent Sessions
For a given time frame, shows the average
subscriber concurrent sessions.
Average Sessions
Average Subscriber
Concurrent Sessions per
Service
For a given time frame, shows the average
subscriber concurrent sessions per service.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-13
Chapter 6 Reporting
Traffic Monitoring Group
Report Metrics
Report Topic Name
Description
Bandwidth
Daily peak BW for Specific
Subscriber
For a given time frame, shows value per
day of the maximum one-hour or two-hour
bandwidth for a specific subscriber.
Bandwidth
Peak Bandwidth per
Subscriber
For a given time frame, shows the peak
bandwidth per subscriber for specific, all,
or by subscriber ID pattern.
Bandwidth
Subscriber Bandwidth per
Service
For a given time frame, shows the
distribution of bandwidth between the
different services defined in the system for
a particular subscriber.
Bandwidth Comparison
Subscriber Bandwidth
Comparison
For a given time frame, shows the
bandwidth comparison for the selected list
of subscribers.
Duration
Subscriber Hourly
Aggregated Minutes per
Service
For a given time frame, shows the hourly
total number of minutes spent for services
defined in the system for a particular
subscriber.
Real-Time Flows
Subscriber Flows Detail
For a given time frame, shows the real-time
flow details for a specific subscriber.
Sessions
Subscriber Daily Usage
Sessions per Service
For a given time frame, shows the daily
sessions distribution between the different
services defined in the system for a
particular subscriber.
Sessions
Subscriber Hourly Usage
Sessions per Service
For a given time frame, shows the hourly
sessions distribution between the different
services defined in the system for a
particular subscriber.
Top Services by Usage
Volume
Subscriber Aggregated
Usage Volume per Service
For a given time frame, shows the most
popular services for the selected monitored
subscribers.
Volume
Subscriber Daily Usage
Volume per Service
For a given time frame, shows the daily
volume distribution between the different
services defined in the system for a
particular subscriber.
Volume
Subscriber Hourly Usage
Volume per Service
For a given time frame, shows the hourly
volume distribution between the different
services defined in the system for a
particular subscriber.
Top Subscribers
A Top Subscribers report identifies the most consuming subscribers in terms of traffic volume (for all or
specific services). Subscriber bandwidth and volume reports can be generated for those subscribers
configured for real-time monitoring.
Cisco Insight Reporter v3 User Guide
6-14
OL-25219-01
Chapter 6 Reporting
Video
The Top Subscribers group includes the following reports:
Report Metrics
Report Topic Name
Description
List
Top Subscribers
For a given time frame, shows a list of
consumption by the subscriber. Note the specified
time will be rounded to the nearest Day or Hour.
The number of available entries depends on the
TA adapter configuration.
Relative
Consumption
Relative Consumption of
Top Subscribers
For a given time frame, shows the relative
consumption of a specific number of subscribers.
Service Distribution
Top Subscribers Usage
Distribution per Service
For a given time frame, shows the usage
distribution per service of specific subscriber or
all subscribers if not specified.
Video
The Video group allows you to view statistics of the video traffic.
Bandwidth Monitoring
The Bandwidth Monitoring group includes the following reports:
Report Metrics
Report Topic Name
Description
Bandwidth Monitoring
Global Bandwidth per
Video Service
For a given time frame, shows the
distribution of bandwidth between the
different Video services defined in the
system.
Bandwidth Monitoring
Package Bandwidth per For a given time frame, shows the
Video Service
distribution of bandwidth between the
different Video services defined in the
system for all subscribers belonging to a
particular package.
Bandwidth Monitoring
Zone Bandwidth per
Video Service
For a given time frame, shows the
distribution of bandwidth between the
different Video services defined in the
system for all subscribers belonging to a
particular zone.
Consumers
The Consumers group includes the following report:
Report Metrics
Report Topic Name
Description
Video Monitoring
Top Video
Consumers
For a given time frame, shows the most popular video
consumers.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-15
Chapter 6 Reporting
Video
Hosts
The Hosts group includes the following reports:
Report Metrics
Report Topic Name
Description
Popularity
Video Hosts
Popularity
For a given time frame, shows the most popular
video hosts ordered by the selected metric.
Time of Day Access
Time of Day Access
pattern per Video
Host
For a given time frame, shows the access pattern for
a video hosts in a certain time of day.
Top
Top Video Hosts
For a given time frame, shows the most popular
video hosts.
Providers
The Providers group includes the following reports:
Report Metrics
Report Topic Name
Description
Activity
Video Providers
Activity
For a given time frame, shows the statistics about
the most popular video providers.
Popularity
Video Providers
Popularity
For a given time frame, shows the most popular
video providers ordered by the selected metric.
Time of Day Access
Time of Day Access
pattern per Video
Provider
For a given time frame, shows the access pattern
for a video provider in a certain time of day.
Top
Top Video Providers
For a given time frame, show the most popular
video providers.
Top
Top Video Providers
Trend
For a given time frame, shows the trend of the
most popular video providers.
Trend
Video Provider Trend
For a given time frame, shows the trend of video
providers.
Services
The Services group includes the following reports:
Report Metrics
Report Topic Name
Description
Distribution
Global Video Service
Distribution
For a given time frame, shows the most popular video
services.
Distribution
Package Video Service
Distribution
For a given time frame, shows the most popular video
services of a particular package.
Distribution
Zone Video Service
Distribution
For a given time frame, shows the most popular video
services of a particular zone.
Cisco Insight Reporter v3 User Guide
6-16
OL-25219-01
Chapter 6 Reporting
VoIP
VoIP
The VoIP group of reports allows you to view statistics of the VoIP traffic.
These reports cannot be generated using data collected from the SCE running in asymmetric routing
classification mode.
Global
The Global group includes the following reports:
Report Metrics
Report Topic Name
Description
Bandwidth
Global Bandwidth per VoIP
Service
For a given time frame, shows the Global
Bandwidth per VoIP Service for selected domains.
Bandwidth
Package Bandwidth per VoIP
Service
For a given time frame, shows the Package
Bandwidth per VoIP Service for selected domains.
Bandwidth
Zone Bandwidth per VoIP
Service
For a given time frame, shows the zone
Bandwidth per VoIP Service for selected domains.
Concurrent Calls Global Concurrent Calls per
VoIP Service
For a given time frame, shows the Global
Concurrent Calls per VoIP Service for selected
domains.
Concurrent Calls Package Concurrent Calls per For a given time frame, shows the Package
VoIP Service
Concurrent Calls per VoIP Service for selected
domains.
Concurrent Calls Zone Concurrent Calls per
VoIP Service
For a given time frame, shows the zone
Concurrent Calls per VoIP Service for selected
domains.
Duration
Global Call Minutes per VoIP For a given time frame, shows the distribution of
Service
concurrent VoIP calls between the different
services defined in the system.
Duration
Global Hourly Call Minutes
per VoIP Service
For a given time frame, shows the Global Hourly
Call Minutes per Service for selected domains.
Duration
Package Hourly Call Minutes
per VoIP Service
For a given time frame, shows the Package Hourly
Call Minutes per Service for selected domains.
Duration
Zone Hourly Call Minutes per For a given time frame, shows the zone Hourly
VoIP Service
Call Minutes per Service for selected domains.
QoS
The QoS group includes the following reports:
Report Metrics
Report Topic Name
Description
Distribution
Global VoIP Codec
Distribution
For a given time frame, shows the Global VoIP
Codec Distribution.
Distribution
Global VoIP MOS
Distribution
For a given time frame, shows the Global VoIP
MOS Distribution for selected domains.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-17
Chapter 6 Reporting
VoIP
Report Metrics
Report Topic Name
Description
Global
Global VoIP Jitter
For a given time frame, shows the Global VoIP
Jitter for selected domains.
Global
Global VoIP MOS
For a given time frame, shows the Global VoIP
MOS for selected domains.
Global
Global VoIP Packets Loss
For a given time frame, shows the Global VoIP
Packets Loss for selected domains.
Hourly Average
Global Hourly Average VoIP For a given time frame, shows the Global Hourly
Jitter
Average VoIP Jitter for selected domains.
Hourly Average
Global Hourly Average VoIP For a given time frame, shows the Global Hourly
MOS
Average VoIP MOS for selected domains.
Hourly Average
Global Hourly Average VoIP For a given time frame, shows the Global Hourly
Packets Loss
Average VoIP Packets Loss for selected domains.
SIP Domains
The SIP Domains group includes the following reports:
Report Metrics
Report Topic Name
Description
Average MOS
Average MOS per SIP
Domain
For a given time frame, shows the Average MOS
per SIP domain.
Calls Duration
Calls Duration per SIP
Domains
For a given time frame, shows the call duration
per SIP domain.
Number of Calls
Number of Calls per SIP
Domain
For a given time frame, shows the most popular
SIP or Vonage domains per number of calls.
Top
Top SIP Domains
For a given time frame, shows the most popular
SIP or Vonage domains.
Top
Top SIP Domains by
Unique Users
For a given time frame, shows the most popular
SIP Domains ordered by Unique Users.
Top User Agents
Top SIP User Agents
For a given time frame, shows the most popular
SIP User Agents.
Subscribers
The Subscribers group includes the following reports:
Report Metrics
Report Topic Name
Description
Top
Top Talkers
For a given time frame, shows the most popular
VoIP subscribers ordered by the selected metric.
Bandwidth
Subscriber Bandwidth
per VoIP Service
For a given time frame, shows the distribution of
bandwidth between the different VoIP services
defined in the system for a particular subscriber.
Duration
Subscriber Hourly Call
Minutes per VoIP
Service
For a given time frame, shows the total number of
call minutes spent for services defined in the
system for a specific subscriber.
Cisco Insight Reporter v3 User Guide
6-18
OL-25219-01
Chapter 6 Reporting
Web
Web
The Web Monitoring Reports provides you the statistics of the web traffic.
Consumers
The Consumers group includes the following report:
Report Metrics
Report Topic Name
Description
Consumers
Top Browsing Consumers
For a given time frame, shows the list of the
most browsing subscribers.
Domains
The Domains group includes the following reports:
Report Metrics
Report Topic Name
Description
Activity
Domains Activity
For a given time frame, shows the web domain
activity.
Popularity
Domains Popularity
For a given time frame, shows the most
popular web domains.
Time of Days
Access
Time of Day Access pattern per For a given time frame, shows the access
Domain
pattern for a web domain in a certain time of
day.
Top
Top Domains
For a given time frame, shows the most
popular web domains.
Top
Top Domains Trend
For a given time frame, shows the trend of the
most popular web domains.
Trend
Domain Trend
For a given time frame, shows the web domain
trend.
Hosts
The Web and Streaming group allows you to compile statistics presenting the most popular servers or
hosts for the various predefined system classes (such as Browsing, Streaming, and Downloading) and
for user-defined classes.
The Hosts group includes the following reports:
Report Metrics
Report Topic Name
Description
Popularity
Hosts Popularity
For a given time frame, shows the most
popular web hosts.
Time of Day Access
Time of Day Access
pattern per Host
For a given time frame, shows the access
pattern for a web host in a certain time of day.
Top
Top Hosts
For a given time frame, shows the most
popular web hosts.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-19
Chapter 6 Reporting
Web
Traffic Discovery Reports
The Traffic Discovery-Statistics group of report templates allows you to view statistics compiled from
the source and destination IP addresses and ports of the system traffic.
The reports cannot be generated using data collected from an SCE platform running in asymmetric
routing classification mode.
Note
The reports in this group are not per subscriber; they supply general port and IP address information.
Clients
The Clients group includes the following reports:
Report Metrics
Report Topic Name
Description
Top
Top Client IP to Server IP For a given time frame, shows the most popular
Client IP to Server IP for specific domains.
Top
Top Client IP to Server IP For a given time frame, shows the most popular
and Server Port
Client IP, Server IP, and Server Port for specific
domains.
Top
Top Client IP to Server
Port
For a given time frame, shows the most popular
Client IP and Server Port for specific domains.
Top
Top Clients
For a given time frame, shows the most popular
clients for specific domains.
Protocol
The Protocol group includes the following reports:
Report Metrics
Report Topic Name
Description
Generic
Top Protocols
For a given time frame, shows the most popular
protocol for specific domains.
IP
Top IP Protocols
For a given time frame, shows the most popular IP
protocol for specific domains.
Top
Top P2P Protocols
For a given time frame, show the most popular
protocol.
Cisco Insight Reporter v3 User Guide
6-20
OL-25219-01
Chapter 6 Reporting
Web
Servers
Please see description on page
The Servers group includes the following reports:
Report Metrics
Report Topic Name
Description
Distribution by
Subscriber Packages
Service Distribution by
Subscriber Packages
For a given time frame, shows the most popular
Service grouped by the package of the requesting
subscriber.
Distribution by
Subscriber Packages
FTP Server Distribution For a given time frame, shows the most popular
by Subscriber Packages FTP server grouped by the package of the
requesting subscriber.
Distribution by
Subscriber Packages
MMS Server
Distribution by
Subscriber Packages
Distribution by
Subscriber Packages
RTSP Host Distribution For a given time frame, shows the most popular
by Subscriber Packages RTSP host grouped by the package of the
requesting subscriber.
Distribution by
Subscriber Packages
Web Hosts Distribution
by Subscriber Packages
For a given time frame, shows the most popular
web host grouped by the package of the
requesting subscriber.
Distribution by
Subscriber Packages
NNTP Server
Distribution by
Subscriber Packages
For a given time frame, shows the distribution by
Subscriber Packages.
Distribution by
Subscriber Packages
POP3 Server
Distribution by
Subscriber Packages
For a given time frame, shows the distribution by
Subscriber Packages.
Distribution by
Subscriber Packages
SMTP Server
Distribution by
Subscriber Packages
For a given time frame, shows the distribution by
Subscriber Packages.
Top
Top Server IP to Server
Port
For a given time frame, show the most popular
Server IP and Server Port for specific domains.
Top
Top Server Ports
For a given time frame, show the most popular
server ports for specific domains.
Top
Top Servers
For a given time frame, show the most popular
servers for specific domains.
Top
Top FTP Servers
For a given time frame, shows Top FTP servers for
selected domains ordered by volume.
Top
Top MMS Servers
For a given time frame, shows Top MMS servers
for selected domains ordered by volume.
Top
Top RTSP Hosts
For a given time frame, shows the most popular
RTSP servers.
Top
Top Service Servers
For a given time frame, shows the most popular
Service servers.
Top
Top Web Hosts
For a given time frame, shows the most popular
web servers.
For a given time frame, shows the most popular
MMS server grouped by the package of the
requesting subscriber.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-21
Chapter 6 Reporting
Malicious Traffic
Report Metrics
Report Topic Name
Description
Top
Top Email Account
Owners
For a given time frame, shows the most popular
Email Account Owners.
Top
Top Email Recipients
For a given time frame, shows the most popular
email recipients ordered by selected metric.
Top
Top Email Senders
For a given time frame, shows the most popular
email senders ordered by selected metric.
Top
Top Newsgroups
For a given time frame, shows the most popular
newsgroups ordered by selected metric.
Top
Top NNTP Consumers
For a given time frame, shows the most popular
NNTP consumers ordered by selected metric.
Top
Top NNTP Servers
For a given time frame, shows the most popular
NNTP servers for selected domains ordered by
traffic volume.
Top
Top POP3 Servers
For a given time frame, shows the most popular
POP3 servers for selected domains ordered by
traffic volume.
Top
Top SMTP Servers
For a given time frame, shows the most popular
SMTP servers for selected domains ordered by
traffic volume.
Top
Top Subscriber to
Newsgroups
For a given time frame, shows the most popular
subscribers to newsgroups.
Services
The Services group includes the following report:
Report Metrics
Report Topic Name
Description
Top
Top Service Ports
For a given time frame, shows distribution Server
Ports of a certain service for specific domains.
Malicious Traffic
The Malicious Traffic group allows you to view statistics of the malicious events accrued in the system.
DoS
The DoS group includes the following reports:
Report Metrics
Report Topic Name
Description
Attacked Subscribers
DoS Attacked
Subscribers
For a given time frame, shows the distribution of
DoS-attacked subscribers over time for the
different IP protocols defined in the system.
Cisco Insight Reporter v3 User Guide
6-22
OL-25219-01
Chapter 6 Reporting
Malicious Traffic
Report Metrics
Report Topic Name
Description
Top
Top DoS Attacked Hosts For a given time frame, shows the most
DoS-attacked hosts.
Top
Top DoS Attacked
Subscribers
For a given time frame, shows the most
DoS-attacked subscribers.
Scans/Attacks
The Scans/Attacks group includes the following reports:
Report Metrics
Report Topic Name
Description
Rate
Global Scan or Attack
Rate
For a given time frame, shows the global scan
or attack rate.
Top
Top Scanned or Attacked
ports
For a given time frame, shows the most
scanned or attacked ports.
Top
Top Scanning or Attacking For a given time frame, shows the most
Hosts
scanning or attacking hosts.
Top
Top Scanning or Attacking For a given time frame, shows the most
Subscribers
scanning or attacking subscribers.
Spam
The Spam group includes the following reports:
Report Metrics
Report Topic Name
Description
Distribution
Cumulative Distribution of For a given time frame, shows the cumulative
Subscriber's SMTP
distribution of subscriber's SMTP sessions.
Sessions
Distribution
Subscriber Average SMTP For a given time frame, shows the average
Sessions
SMTP sessions distribution.
Hourly Sessions
Global Hourly Spam
Sessions
For a given time frame, shows the hourly
spam sessions distribution.
Top
Top Spammers
For a given time frame, shows the top
spammers.
Subscribers
The Subscribers group includes the following reports:
Report Metrics
Report Topic Name
Description
Infected
Infected Subscribers
For a given time frame, shows the list of
infected subscribers.
Infected
Infected Subscribers vs
Active Subscribers
For a given time frame, shows the
distributions of infected and active
subscribers.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-23
Chapter 6 Reporting
ASR1K Reports
ASR1K Reports
The ASR1K report topics are organized in the following report groups:
•
Traffic Monitoring Group, page 6-24
•
Traffic Discovery Group, page 6-25
Traffic Monitoring Group
Global
The Global group includes the following reports:
Report Metrics
Report Topic Name
Description
Bandwidth
Global Bandwidth per
Applications
This report is used to display the bandwidth
consumption for all the selected applications,
across all the selected ASR devices.
Bandwidth
Global Package
Bandwidth per Traffic
Direction
This report displays Bandwidth consumption per
Traffic Direction for the selected applications and
ASR devices.
Bandwidth
Daily peak BW
This report displays the Daily Peak bandwidth,
applicable for All the applications. The selection
in the Application tab is ignored, in case this
report is executed.
Bandwidth
Global Bandwidth per
Application VS Total
Bandwidth
This report displays the bandwidth consumption
of the selected applications against the total
bandwidth consumption for all applications.
Volume
Global Aggregated
Usage Volume per
Application
This report displays the aggregated usage volume
for the selected applications and ASR devices and
their interfaces. The chart for this report is plotted
as Volume Vs Applications (or Category)
Concurrent Sessions
Global Concurrent
Sessions per
Application
This report is used to display the concurrent
sessions per application (granularity), for all
selected applications and ASR devices.
Sessions
Global Usage Sessions
per Application
This report is used to display the number of usage
sessions per application (granularity), for all
selected applications and ASR devices (along
with their interfaces).
Volume
Global Daily Usage
This report is used to display the usage volume
Volume per Application per application (granularity), for all selected
applications and ASR devices (along with their
interfaces).
Minutes
Global Hourly
This report is used to display the hourly
Aggregated Minutes per (aggregation) minutes for all the selected
Applications
applications.
Cisco Insight Reporter v3 User Guide
6-24
OL-25219-01
Chapter 6 Reporting
Traffic Discovery Group
VOIP
The VOIP group includes the following reports:
Report Metrics
Report Topic Name
Description
Bandwidth
Global Bandwidth per
VoIP Applications
This report is used to display the bandwidth
consumption for all the selected VoIP applications
under the voice and video category, across all the
selected ASR devices.
Call Minutes
Global Hourly Call
Minutes per VoIP
Application
This report is used to display the hourly (aggregation)
minutes for all the selected VoIP applications under the
voice and video category.
Concurrent Calls
Global Concurrent
Calls per VoIP
Application
This report is used to display the concurrent sessions
per application (granularity), for all selected
applications and ASR devices (along with their
interfaces).
Video
The Video group includes the following reports:
Report Metrics
Report Topic Name
Description
Bandwidth
Global Bandwidth per
Video Applications
This report is used to display the bandwidth
consumption for all the selected video applications
under the voice and video category, across all the
selected ASR devices.
Volume
Global Video Application
Distribution
This report is used to display volume distribution
across the selected applications.
Traffic Discovery Group
Application
The Application group includes the following reports:
Report Metrics
Report Topic Name
Description
Sessions, Volume
Top Application Ports
This report's data is used to display the volume
or session data for "Top" Application Ports. The
Top Application Ports are decided by the limit
value specified before running the report. Also
the data depends on the selection of the
Applications and interfaces.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-25
Chapter 6 Reporting
Traffic Discovery Group
Clients
The Clients group includes the following reports:
Report Metrics
Report Topic Name
Description
Sessions, Volume
Top Client IP to Server IP
and Server Port
This report's data is represented in a tabular
view, where the client IP, Server IP, Server Port
and the Volume/ Session (depending on the
direction selection) is displayed.
Sessions, Volume
Top Email Clients
This report depicts all the Top Email Clients
(result subjected to the Limit value specified)
based on their Volume/ Session distribution.
The Volume/ Session distribution is also
dependent on the flow direction chosen.
Volume
Top P2P Up loaders
This report depicts all the Top P2P up loaders
(result subjected to the Limit value specified)
based on their Volume distribution. The up
loaders depict volume for data where the flow
direction is 1 (Outgoing).
Sessions, Volume
Top Browsing Clients
This report depicts all the Top Browsing
Clients (result subjected to the Limit value
specified) based on their Volume/ Session
distribution. The Volume/ Session distribution
is also dependent on the flow direction chosen.
Sessions, Volume
Top Clients
This report depicts all the Top Clients (result
subjected to the Limit value specified) based on
their Volume/ Session distribution. The
Volume/ Session distribution is also dependent
on the flow direction chosen.
Sessions, Volume
Top Client IP to Server
Port
This report's data is represented in a tabular
view, where the client IP, Server Port and the
Volume/ Session (depending on the direction
selection) is displayed.
Sessions, Volume
Top Client IP to Server IP
This report's data is represented in a tabular
view, where the client IP, Server IP and the
Volume/ Session (depending on the direction
selection) is displayed.
Volume
Top P2P Down loaders
This report depicts all the Top P2P up loaders
(result subjected to the Limit value specified)
based on their Volume distribution. The up
loaders depict volume for data where the flow
direction is 0 (Incoming).
Cisco Insight Reporter v3 User Guide
6-26
OL-25219-01
Chapter 6 Reporting
Traffic Discovery Group
Protocols
The Protocols group includes the following reports:
Report Metrics
Report Topic Name
Description
Sessions, Volume
Top IP Protocols
This report's data is used to display the
volume or session data for "Top" IP
Protocols. The Top protocols are decided by
the limit value specified before running the
report.
Sessions, Volume
Top P2P Protocols
This report's data is used to display the
volume or session data for "Top" P2P
Protocols. The Top protocols are decided by
the limit value specified before running the
report.
Sessions, Volume
Top Protocols
This report's data is used to display the
volume or session data for "Top" Protocols.
The Top protocols are decided by the limit
value specified before running the report.
Servers
The Serversgroup includes the following reports:
Report Metrics
Report Topic Name
Description
Sessions, Volume
Top Servers
This report's data is used to display the
volume or session data for "Top" Server IPs.
The Top Server IPs are decided by the limit
value specified before running the report.
Also the data depends on the selection of the
Applications and interfaces.
Sessions, Volume
Top FTP Servers
This report's data is used to display the
volume or session data for "Top" FTP
Server IPs. The Top Server IPs are decided
by the limit value specified before running
the report. Also the data depends on the
selection of the Applications and interfaces.
Sessions, Volume
Top Browsing Servers
This report's data is used to display the
volume or session data for "Top" Browsing
Server IPs. The Top Server IPs are decided
by the limit value specified before running
the report. Also the data depends on the
selection of the Applications and interfaces.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-27
Chapter 6 Reporting
Running Reports
Report Metrics
Report Topic Name
Description
Sessions, Volume
Top Server Ports
This report's data is used to display the
volume or session data for "Top" Server
Ports. The Top Server Ports are decided by
the limit value specified before running the
report. Also the data depends on the
selection of the Applications and interfaces.
Sessions, Volume
Top Server IP to Server Port This report's data is used to display the
volume or session data for "Top" Server IPs
and Server Ports. The Top Server IPs are
decided by the limit value specified before
running the report. Also the data depends on
the selection of the Applications and
interfaces.
Running Reports
Report Wizard enables a user to Run Reports for the selected Network. Through series of steps, the user
can select a report (through the Topic Tab) and specify the parameters like date range (through
Date/Time tab) devices (through Topology tab), services (through Service tab) or applications (through
Applications tab) to filter the data for generating reports. Report wizard also lets user to choose some
other parameters like traffic direction, unit of result and chart type etc. to customize the report result.
Once all selections have been made the user runs the report and sees the report result on the final report
wizard tab. He can schedule, add the report to dashboard or gallery, export the report, remember the
report, duplicate the report or simply refresh the report all through report wizard.
•
Network, page 6-28Network, page 6-27
•
Topic, page 6-29
•
Date and Time, page 6-31
•
Topology, page 6-32
•
Services (Applicable only for SCE networks), page 6-33
•
Applications (Applicable only for ASR1K networks), page 6-34
•
View (Applicable only for SCE networks), page 6-35
•
Parameters, page 6-36
•
Protocols (Applicable only for SCE networks), page 6-37
Network
This is the first and the mandatory tab. It shows the list of available networks (both SCE and ASR1K)
that the operator is allowed to see and use for reporting.
If more than one network is available, the last chosen shall become the pre-selected network of the user,
the next time a new report wizard is launched.
Cisco Insight Reporter v3 User Guide
6-28
OL-25219-01
Chapter 6 Reporting
Topic
When you click the Network tab, you see:
Figure 6-1
Selecting Network
Topic
This is the second tab and it is also mandatory. In the Report wizard, the Topic tab allows the operator
to select the desired type of traffic analysis. It shows the available report topics by using multi-step
selection (up to three steps) to let the operator select the needed report by specifying the main topic,
desired metric, and other report features.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-29
Chapter 6 Reporting
Topic
When you click the Topic tab, you see:
Figure 6-2
Selecting Topic (SCE Network)
Figure 6-3
Selecting Topic (ASR1K Network)
Cisco Insight Reporter v3 User Guide
6-30
OL-25219-01
Chapter 6 Reporting
Date and Time
Date and Time
This is the third tab and is optional. It has some default settings (usually a time window of the last 24
hours, days or weeks, but this depends on the selected topic). You need to enter the details in the tab only
if you want to set a different time interval.
To enter the details in the tab with a different time interval, uncheck the Show Last 24 hours check box.
You can enter date and time by:
•
Entering the date and hours manually or using the up and down arrow buttons.
•
Clicking on the calendar dates.
For reports supporting a Start date or End date (based on SCE time stamps), you can select a timezone
option to run the report by:
•
Using the timezone of each SCE device, that is set as default.
When the format type is Start date or End date, the operator can also set the time aggregation from the
Aggregation drop-down list. Not all reports support time aggregation, whereas some reports only allow
a limited set of aggregation options. As a consequence, the aggregation drop-down list can be disabled
or show only limited values.
The effect of time aggregation on reports having a time-based X axis is the distribution of samples on
specific time intervals, as imposed by the selected aggregation value (i.e.: 30 minutes, hourly, daily…).
For these reports, the metric shown on the Y axis is averaged or summed according to the selected report.
As an example: cumulative volumes are summed, whether the instantaneous bandwidth is generally
averaged over the selected aggregation interval.
When you click the Date & Time tab, you see:
Figure 6-4
Setting the Date and Time
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-31
Chapter 6 Reporting
Topology
Topology
This tab is optional and dynamic, because it is not always required. It shows the topology view of the
selected networks. The trees view (custom or devices) allows either selecting devices easily or grouping
of devices to achieve the right view on the chart. You can save the tree configuration in the Report wizard
in the form of collapsed or expanded layers.
Topology can be drilled down up to the Links or Virtual Links level for SCE networks to include details
in the report generated.
In the case ASR1K network topology can be drilldown up to the interface level. This tab will show only
monitored interfaces.
Note
For ASR1K based networks, to make sure that the monitored interfaces are shown in the topology,
synchronize the interfaces from Network Wizard. If there are no monitored interfaces for a device, it
cannot be selected to run the reports.
Please refer to the troubleshooting section of Cisco Insight Reporter v3 Installation Guide.
When you click the Topology tab, you see:
Figure 6-5
Selecting Topology (SCE Network)
Cisco Insight Reporter v3 User Guide
6-32
OL-25219-01
Chapter 6 Reporting
Services (Applicable only for SCE networks)
Figure 6-6
Selecting Topology (ASR1K Network)
Services (Applicable only for SCE networks)
This tab is optional and dynamic, because is not always required. It displays the services enabled in the
SCE's of the selected networks.
The operator can switch to the trees view (service families, custom services, or list of services) allowing
a better understanding of services and family of services and achieving the right view on the chart. The
tree configuration can be saved as personal settings in the form of collapsed or expanded layers.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-33
Chapter 6 Reporting
Applications (Applicable only for ASR1K networks)
When you click the Services tab, you see:
Figure 6-7
Note
Selecting Services
The user will be able to see the Services only if he select an SCE Network.
Applications (Applicable only for ASR1K networks)
This tab is optional and dynamic, because is not always required. It displays the applications enabled in
the ASR1K's of the selected networks.
It shows the application attributes organized in a flat table that can be filtered on each column. Those
attributes are P2P, Encrypted, and Tunneled. Choose Granularity option enables user to view the report
output as per selected granularity. There are various options to select granularity like Category, Sub
Category, Application Group, and Application. The user sees the list of all the applications at first, he
can apply filter to see only the applications that he wishes. Applications are organized under Application
Groups, which are organized under Sub-Category which in turn are grouped under Categories. To select
application of an entire Category, the user can select to filter on Category column and then do a "Select
All".
Users are able to see their current selections in a pop-up window by clicking on "Show Selected
Applications" button. To clear all the filters applied on the table, use the "Clear All Filter" button. The
various attributes are described in Figure 6-8.
Cisco Insight Reporter v3 User Guide
6-34
OL-25219-01
Chapter 6 Reporting
View (Applicable only for SCE networks)
Figure 6-8
Application attributes Description
When you click the Application tab, you see:
Figure 6-9
Note
Selecting Applications
The user will be able to see the Applications only if he select an ASR1K Network.
View (Applicable only for SCE networks)
This tab is optional and dynamic, because it is required only when you need to make a choice between
package and zone. It shows zone and package lists as alternative selection. You can choose package or
zone as the first selection and save this as personal settings for the tab.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-35
Chapter 6 Reporting
Parameters
When you click the View tab, you see:
Figure 6-10
Selecting Views
Parameters
As an optional step, the wizard allows setting more optional parameters such as:
Note
•
Customization of the report name and description—All reports available in Cisco Insight Reporter
v3 have a default name, as taken from the original template. You can provide a customized report
name and description in the respective fields.
•
Metric unit—You can select any available option (Kbps, Mbps, and Gbps) from the Metric unit
drop-down list.
•
Traffic direction—You can generate the chart in upstream, downstream, or both.
•
Chart type—You can get the output chart in the form of a pie, bar, or line diagram.
This tab has an advanced section that contains additional parameters. The advanced section can be made
visible by clicking on the dedicated wheel button.
Cisco Insight Reporter v3 User Guide
6-36
OL-25219-01
Chapter 6 Reporting
Protocols (Applicable only for SCE networks)
When you click the Parameters tab, you see:
Figure 6-11
Setting Parameters
Protocols (Applicable only for SCE networks)
This is an optional tab and appears only for selected set of report topics which are configured to show
data specific to protocols or applications.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-37
Chapter 6 Reporting
Running an Interactive Report
A screen similar to following appears:
Figure 6-12
Protocol Selection
You can go back to some tabs, change some parameters, and then choose to save, run, or schedule a
report. This technique can be used to quickly generate, save, or schedule, a series of similar reports
without repeating all the steps in the wizard.
Running an Interactive Report
You execute at least all the mandatory steps in the wizard, the report can be displayed in the Report tab
by clicking the Refresh Report button. The report is interactive and you can perform a series of real-time
actions using the different available graphical widgets.
The Report tab has four main sections:
Sections
Description
Chart
It contains the chart itself, chart name, time span,
axis, and labels.
Legend for Series displayed in Chart
To the left of the chart, there is a section with two
tabs, one with the legend, detailing the series
colors and labels, and the second with the list of
selected parameters, detailing all the previous
selections for the chart.
Cisco Insight Reporter v3 User Guide
6-38
OL-25219-01
Chapter 6 Reporting
Running an Interactive Report
Sections
Description
Leading Input
It displays the service tree of the services that
appear in the chart and allows you to choose the
level of detail based on the Popularity Tree,
Service Families, and Custom Tree.
Time controller
With time-based reports, under the chart, there is
a time controller allowing the change of
timeframe to display in the chart.
When you execute a report, you see:
Figure 6-13
Note
Running an Interactive Report
The current implementation of reports causes all bandwidth samples below 1024 Kbps to be truncated
to 0 (zero) when the user select a higher measurement unit such as Mbps and Gbps.
When the application plots a stacked-area chart containing several "minor" services or applications,
these series will disappear when switching from Kbps to Mbps, thus the total amount of traffic could be
inaccurate.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-39
Chapter 6 Reporting
Running an Interactive Report
Chart
Cisco Insight Reporter v3 provides the configuration settings for the following chart elements:
Figure 6-14
Chart Elements
Chart Elements
Description
Upstream and downstream details on the same
chart
Reports showing service series and supporting a
filter on traffic direction, can display the
information about the upstream component only,
the downstream, or both directions.
When displaying bidirectional service series
(when the traffic direction filter is set to "Both"),
a flag allows expanding each service contribution
into upstream and downstream components.=
Drill-down reports
The application supports the drill-down feature on
interactive charts. When focusing on a specific
series, the operator can launch a new report based
on the selected series and related to the source
report.
This feature is used to navigate through different
reports when performing some specific analysis.
Note
Data Marker
Not all reports will support the drill-down
option.
It provides an interactive data indicator that can
be positioned on the plot to mark a specific
position in terms of coordinates. The data
indicator follows the series plot when moved on
the chart- so when it is moved in the X-axis
direction, the Y-axis positioning will follow the
plot automatically and vice versa.
The indicator must have a display which provides
information about its current location, for
example, the relevant X and Y axis percentage
value in the cumulative report.
Note
When printing or exporting the chart, you
can choose to display the indicator or not.
Cisco Insight Reporter v3 User Guide
6-40
OL-25219-01
Chapter 6 Reporting
Running an Interactive Report
Chart Elements
Description
Chart zoom in/out
In interactive view you can zoom out interactively
and define the level of zoom into the current
report chart.
Note
Chart types
When printing or exporting a chart after
the zoom operation has been used, the
layout of the output reproduce what the
operator sees on the screen (the
information of the applied zoom level is
not lost).
A list of alternative chart types (bar, pie, and line)
is displayed in the upper-right corner of the
Report tab. You can choose any of the chart types
before exporting or printing the report.
Leading Input
The tree controllers are present on the Report tab of the wizard as well. It displays the service tree of the
services that appear in the chart and allows you to choose the level of detail based on the tree status.
You can perform operations on the chart such as print or export based on the current hierarchy status of
the chart.
You can also define the hierarchy type and the depth of the tree when you define a scheduled report.
Cisco Insight Reporter v3 provides the ability to configure the number of items displayed in the initial
group and the number of items displayed on each expansion of "other".
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-41
Chapter 6 Reporting
Running an Interactive Report
Figure 6-15
Tree Controllers
Time Controller
The Cisco Insight Reporter v3 describes a multi-graph view feature. It provides the ability to create
reports that combine several different series into the same view.
The following time controller, associated with time-based charts and positioned under the time axis, can
be an example:
Figure 6-16
Time Controller
Cisco Insight Reporter v3 has the time interval options (hourly, daily, weekly, total, etc.) for trend
analysis reports.
The time controller introduced by Cisco Insight Reporter v3 that supports manual positioning of the
sliding time window. Using the scroll buttons on the extreme corners of the time controller widget
Cisco Insight Reporter v3 User Guide
6-42
OL-25219-01
Chapter 6 Reporting
Scheduling a Report
When the tab with the report chart is in focus, the toolbar can be used to perform the following operations
(according to the capabilities of the connected operator):
•
Scheduling a Report, page 6-43
•
Saving a Report, page 6-44
•
Exporting Report Output, page 6-44
Scheduling a Report
Reports can be run immediately or scheduled to be executed with a programmable delay or with a
specific frequency. These reports can further be sent via email to a list of recipients (the Cisco Insight
Reporter v3 must be configured to communicate with an SMTP server before using this feature).
To schedule a report, follow perform the following steps:
Step 1
Select the Schedule option from the toolbar. A schedule dialog box will appear allowing the setting of
all required parameters.
When you select the schedule option, you see:
Figure 6-17
Schedule Report
Step 2
Set all desired parameters (time, destination, export format, report name, layout, etc.) for the upcoming
reports.
Step 3
Click Cancel to return to previous page, or click Schedule to schedule the report.
A summary of the scheduled report will be shown under the scheduled reports module. To edit or delete
the scheduled reports, click the Scheduled Reports icon in the module Launcher.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-43
Chapter 6 Reporting
Saving a Report
Saving a Report
When you set all mandatory parameters of a report or have in focus a generated report, you can save it
as a template that can be used during later sessions. A template enables you to run a report quickly,
skipping the wizard steps. You can set a report custom name or use the default.
After a report has been saved, the number on the icon of the launcher gets updated, which shows that a
new saved report is available.
Exporting Report Output
When you work with the Report tab in focus, all possible export formats (PDF, image, CSV) are available
on the toolbar. When you clicks one of these exports, a dialog box appears, allowing you to set what
needs to be exported (chart, table, legends, titles, etc.), the export format type (PDF, image, CSV), and
the template layout.
My Favorites
You can select all mandatory parameters of a report and save it as a template that can be used later. The
report template allows running reports while skipping all the wizard steps. You can set a report custom
name or use the default.
To access and display the saved reports, click the My favorites icon on the module launcher.
It shows a list of report templates, with report custom name, network, modified date, and creator name.
You can search for the report from the list and use filters.
To use the filter, perform the following steps:
Step 1
Click the Additional Filters option on the top-right corner of the My Favorites module. The various
filter options are displayed.
Step 2
Filter and sort reports using any one of the following criteria; Creation date, Network name, Custom
name of the report, Creators name, etc.
Cisco Insight Reporter v3 User Guide
6-44
OL-25219-01
Chapter 6 Reporting
Sharing a Report Definition
When you filter the reports, you see:
Figure 6-18
Filtering Reports
On applying the above mentioned filters, the report list gets updated.
With the saved reports, the following actions can be performed:
•
Sharing a Report Definition, page 6-45
•
Duplicating a Report Definition, page 6-46
Sharing a Report Definition
To share a report definition, perform the following steps:
Step 1
Select the report definitions you want to share.
Click Share Selected. A Share Selected Report Definitions dialog box is displayed.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-45
Chapter 6 Reporting
Duplicating a Report Definition
When you click Share Selected, you see:
Figure 6-19
Sharing Report Definition
Step 2
Select the network groups whose visibility rights are compatible with the selected favorite report.
Step 3
Click Share. Each target account will get a copy of the select report in the respective favorite lists.
Note
Because this operation creates a new element in the favorite report list of the target accounts, a
notification gets displayed on the favorite report module on the module launcher of those accounts.
Similarly, you can unshare a shared report definition as well.
Duplicating a Report Definition
You can quickly create the exact copy of a selected report and conveniently change only a subset of
parameters as needed. This allows you to open and compare several charts on a single screen.
To duplicate a report definition, perform the following steps:
Step 1
Select the report definitions you want to duplicate.
Step 2
Select the Duplicate Selected option.
Cisco Insight Reporter v3 User Guide
6-46
OL-25219-01
Chapter 6 Reporting
Report Gallery
When you select Duplicate Selected, you see:
Figure 6-20
Duplicating a Report Definition
The duplicated report definitions are labeled as Copy of (old report name) and are selected by default
after duplication.
Report Gallery
The report gallery is a tool using which where each user can view all:
•
Report results shared by other accounts (only reports fulfilling the report visibility constraints of the
accounts will be displayed).
•
Personal reports that were published on the gallery (these can be private or shared with other users).
•
Results of personal scheduled reports.
•
Temporary reports saved with the "Remember" action on the workspace. These will be removed
after the current session is over.
To access and display the published reports, click the Report Gallery icon on the module launcher.
Using a report gallery, you can
•
Publish a Report Output, page 6-48
•
Remember a Report, page 6-49
•
Merging a Reports, page 6-50
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-47
Chapter 6 Reporting
Publish a Report Output
Publish a Report Output
To publish a report output, perform the following steps:
Step 1
Click Publish from the toolbar. A publish dialog box appears.
Step 2
Select the type of output to be published to the report gallery.
Step 3
Check the Share with checkbox, if you want to share the published report with a particular account
group.
Note
Step 4
If you want to publish the report as a CSV file, click Next and the file will get published to the report
gallery.
Click Next. A dialog box similar to following appears on the screen:
Figure 6-21
Publishing a Report Output
Step 5
Set all the desired parameters (report title, subtitle, description, chart type, locale, and elements to
include such as logo, legend, summary table).
Step 6
Click Done.
Cisco Insight Reporter v3 User Guide
6-48
OL-25219-01
Chapter 6 Reporting
Remember a Report
Remember a Report
User can choose to remember more than one report output (stored as PDF only), in which case the PDF
files are available to the user until his session is terminated or he logs out. The reports that are
remembered can be combined (merged) to generate an output (generated as PDF) containing various
reports. To remember a report, perform the following steps:
Step 1
Click Remember from the toolbar. A Remember dialog box as shown below, appears
Figure 6-22
Remembering a Report
Step 2
Set all the desired parameters (report title, subtitle, description, chart type, locale, and elements to
include such as logo, legend, summary table).
Step 3
Click Done.
A notification appears on the report gallery icon, which shows that a new report has been published to
the report gallery.
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-49
Chapter 6 Reporting
Merging a Reports
Merging a Reports
To merge multiple report results (only PDF) from the Gallery into a single layout, perform the following
steps:
Step 1
Select multiple reports (only PDF) from the report gallery you want to merge.
Click Merge on the toolbar. A dialog box similar to following appears on the screen:
Figure 6-23
Merging Report Output
In the Merger Reports dialog box, provide the cover title and description to be shown on the cover page
of the merged output.
Select the order of the reports in which you want to see the generated output.
Step 2
Click Merge.
A new browser window opens showing the merged PDF output containing contents from all the selected
reports.
Scheduled Reports
Cisco Insight Reporter v3 supports the ability to automatically run the several predefined reports each
in a preconfigured time and interval. For example, an administrator needs to periodically share a set of
reports with his or her managers or peers. The user (administrator) can define a list of users (managers)
that will receive a notification on report batch completion and will have access to the report results as
well.
Scheduled reports run in background and are designed to produce a static output that can be sent via
email or stored on the file system of the server.
Cisco Insight Reporter v3 User Guide
6-50
OL-25219-01
Chapter 6 Reporting
Deleting a Scheduled Report
To access and display your saved reports, click the Scheduled Reports icon on the module launcher.
Using a scheduled report, you can perform following functions:
•
Deleting a Scheduled Report, page 6-51
•
Editing a Scheduled Report, page 6-51
Deleting a Scheduled Report
To delete a scheduled report, perform the following steps:
Step 1
Select the target report definitions.
Step 2
Choose Delete. A delete dialog box similar to the following appears:
Figure 6-24
Deleting a Scheduled Report
Step 3
Review the name of the reports to be deleted.
Step 4
Click Delete to confirm.
Editing a Scheduled Report
To edit a scheduled report, perform the following steps:
Step 1
Select the target report from the list of scheduled reports.
Step 2
Select the Edit schedule option located at the extreme right of the report name. An Edit Schedule dialog
box as shown below appears:
Cisco Insight Reporter v3 User Guide
OL-25219-01
6-51
Chapter 6 Reporting
Editing a Scheduled Report
Figure 6-25
Editing a Scheduled Report
Step 3
Set the report schedule as needed. Click Next to confirm. A new dialog box appears.
Step 4
Select the report output. Click Next to confirm. A new dialog box appears on the screen.
Step 5
Set all the desired parameters (report title, subtitle, description, chart type, locale, and elements to
include such as logo, legend, summary table). Click Next to confirm.
Step 6
Select report destination and choose to publish the report as private or public.
Step 7
Click Save.
Cisco Insight Reporter v3 User Guide
6-52
OL-25219-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising