ProForm 280 Csx Bike User`s manual

ProForm 280 Csx Bike User`s manual
www.proform.com
Model No. PFEX71608.2
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
1-888-533-1333
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
USER'S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE EXERCISE BIKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.
PROFORM is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise bike before using your exercise bike.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise bike. Always wear
athletic shoes for foot protection.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
10. The exercise bike should not be used by
persons weighing more than 250 lbs.
(113 kg).
2. Use the exercise bike only as described in
this manual.
3. It is the responsibility of the owner to ensure
that all users of the exercise bike are adequately informed of all precautions.
11. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
4. The exercise bike is intended for home use
only. Do not use the exercise bike in a commercial, rental, or institutional setting.
12. The exercise bike does not have a free
wheel; the pedals will continue to move until
the flywheel stops. Reduce your pedaling
speed in a controlled way.
5. Keep the exercise bike indoors, away from
moisture and dust. Do not put the exercise
bike in a garage or covered patio, or near
water.
13. Always keep your back straight while using
the exercise bike; do not arch your back.
6. Place the exercise bike on a level surface
with at least 2 ft. (0.6 m) of clearance around
the exercise bike. To protect the floor or
carpet from damage, place a mat under the
exercise bike.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
8. Keep children under age 12 and pets away
from the exercise bike at all times.
3
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM®
280 CSX exercise bike. Cycling is an effective exercise for increasing cardiovascular fitness, building
endurance, and toning the body. The 280 CSX exercise bike provides an impressive selection of features
designed to make your workouts at home more effective and enjoyable.
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
model number and serial number before contacting
us. The model number and the location of the serial
number decal are shown on the front cover of this
manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
you use the exercise bike. If you have questions
Fan
Handlebar
Console
Pulse Sensor
Water Bottle Holder*
Seat
Seat Knob
Pedal/Strap
Wheel
Leveling Foot
*Water bottle is not included
4
ASSEMBLY
To hire an authorized service technician to assemble the exercise bike, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires an adjustable wrench
screwdriver
.
and a Phillips
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled.
M8 Locknut
(10)–6
M8 x 25mm Patch
Screw (45)–6
M10 Locknut
(33)–4
M8 Curved
Washer (39)–2
M8 Split
Washer (41)–10
M4 x 16mm
Screw (49)–4
M4 x 22mm
Screw (20)–2
M10 x 75mm Carriage Bolt (30)–4
M8 x 47mm Patch
Screw (9)–2
1. Identify the Front Stabilizer (2).
1
See the inset drawing. Attach a Wheel (14) to
one end of the Front Stabilizer (2) with an M8
Locknut (10). Make sure that the Wheel is oriented as shown and that it turns freely.
1
Align the plastic posts on a Wheel Cover (23)
with the plastic posts on the Wheel (14), and
press the Wheel Cover onto the Wheel.
2
Assemble the other Wheel (not shown) in
the same way.
33
30
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (2) to the
Frame with two M10 x 75mm Carriage Bolts
(30) and two M10 Locknuts (33) as shown.
23
5
10
14
2
Post
2. While another person lifts the rear of the Frame
(1), attach the Rear Stabilizer (6) with two M10
x 75mm Carriage Bolts (30) and two M10
Locknuts (33).
2
33
33
3. While a second person holds the Upright (13)
near the Frame (1), connect the Upper Wire
Harness (36) to the Lower Wire Harness (55).
1
6
30
3
Carefully pull the excess Upper Wire Harness
(36) out of the top of the Upright (13), and slide
the Upright onto the Frame (1).
Avoid pinching
the wires
Tip: Avoid pinching the wires. Attach the
Upright (13) with three M8 x 25mm Patch
Screws (45) and three M8 Split Washers (41).
13
41
36
45
55
1
6
41
45
4. Attach the Water Bottle Holder (8) to the Upright
(13) with two M4 x 22mm Screws (20).
4
13
5. Attach the Handlebar (15) to the Upright (13)
with two M8 x 47mm Patch Screws (9) and two
M8 Curved Washers (39).
8
5
20
15
39
13
7
39
9
6. The Console (16) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batteries
together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before inserting batteries. Otherwise, you may damage
the console displays or other electronic
components. Remove the battery cover, insert
the batteries into the battery compartment, and
reattach the battery cover. Make sure to orient
the batteries as shown by the diagram
inside the battery compartment.
6
16
To purchase an optional power adapter, contact the store where you purchased this
product or see the cover of this manual. To
avoid damaging the console, use only a
manufacturer-supplied power adapter. Plug
one end of the power adapter into the jack on
the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
Batteries
7. While a second person holds the Console (16)
near the Upright (13), connect the console wire
to the Upper Wire Harness (36).
7
16
Insert the excess console wire and Upper Wire
Harness (36) downward into the Upright (13).
Tip: Avoid pinching the wires. Attach the
Console (16) to the Upright (13) with four M4 x
16mm Screws (49).
Console
Wire
49
49
8
Battery
Cover
13
36
Avoid pinching
the wires
8. Attach the Seat Frame (28) to the Frame (1)
with three M8 x 25mm Patch Screws (45) and
three M8 Split Washers (41).
8
45
45
45
41
41
28
1
9. Loosen the Seat Knob (11) and pull it outward.
Next, insert the Seat Post (5) into the Seat
Frame (28).
9
Press the Seat Post Cap (54) into the lower end
of the Seat Post (5).
5
Align one of the adjustment holes in the Seat
Post (5) with the indicated hole in the Seat
Frame (28).
Adjustment
Holes
28
Then, release the Seat Knob (11) and tighten it
into the Seat Frame (28) and the Seat Post (5).
Make sure that the Seat Knob is engaged in
an adjustment hole in the Seat Post.
11
54
9
Hole
10. Attach the Seat (12) to the Seat Post (5) with
four M8 Locknuts (10) and four M8 Split
Washers (41).
10
Note: The M8 Locknuts (10) and the M8 Split
Washers (41) may be preattached to the underside of the Seat.
12
5
41
10
11. Identify the Left Pedal (24), which is marked
with an “L.”
Using an adjustable wrench, firmly tighten the
Left Pedal (24) counterclockwise into the left
arm of the Crank (21).
41
10
11
Tighten the Right Pedal (not shown) clockwise
into the right arm of the Crank (21).
21
IMPORTANT: Tighten both pedals as firmly
as possible. After using the exercise bike for
one week, retighten the pedals. For best performance, keep the pedals tightened.
Strap
Adjust the strap on the Left Pedal (24) to the
desired position, and press the end of the strap
onto the tab on the Left Pedal. Adjust the
strap on the Right Pedal (not shown) in the
same way.
24
Tab
12. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
10
HOW TO OPERATE THE EXERCISE BIKE
HOW TO ADJUST THE SEAT POST
HOW TO ADJUST THE PEDAL STRAPS
For effective exercise, the seat should be at the proper height. As you pedal, there should be a slight bend
in your knees when the pedals are in the lowest position.
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired position,
and then press the
ends of the straps
onto the tabs.
To adjust the
height of the seat,
first turn the seat
knob counterclockSeat
wise and pull it
outward. Next,
Hole
slide the seat post
upward or downward, and align
one of the adjustKnob
ment holes in the
seat post with the
indicated hole in
the seat frame.
Then, release the
seat knob into the
seat frame and the seat post, and turn the knob clockwise until it is tight. Make sure that the seat knob is
inserted through one of the adjustment holes in
the seat post.
Strap
Tab
HOW TO LEVEL THE EXERCISE BIKE
If the exercise bike
rocks on your floor
during use, turn
one or both of the
leveling feet
beneath the rear
stabilizer until the
rocking motion is
eliminated.
11
Leveling
Feet
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
To use the manual mode, see page 13. To use a
preset workout, see page 15. To use the sound
system, see page 15.
When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button. As you exercise, the console will provide
continuous exercise feedback. You can even measure
your heart rate using the handgrip pulse sensor.
Note: Before using the console, make sure that batteries are installed (see assembly step 6 on page 8). If
there is a sheet of clear plastic on the display, remove
the plastic.
The console also offers eight preset workouts. Each
workout automatically changes the resistance of the
pedals and prompts you to vary your pedaling speed
as it guides you through an effective workout.
12
HOW TO USE THE MANUAL MODE
The lower right
display can show your
pedaling speed and the
resistance level of the
pedals. The display will
change modes every
few seconds. The display will also show your heart
rate when you use the handgrip pulse sensor (see
step 5 on page 14).
1. Press any button on the console or begin
pedaling to turn on the console.
When you turn on the console, the displays and
the workout target pacer will light. A tone will then
sound and the console will be ready for use.
2. Select the manual mode.
The left display will
show a track representing 1/4 mile (400
meters). As you exercise, indicators will
appear in succession
around the track until
the entire track
appears. The track will then disappear and the indicators will again begin to appear in succession
When you turn on the console, the manual mode
will be selected. If you have selected a workout,
reselect the manual mode by pressing one of the
eight workout buttons on the console repeatedly
until a track appears in the left display.
To change the display mode, press the Display button repeatedly until the desired exercise information
appears in the upper or lower right display. After
several seconds, the displays will change modes
automatically as before.
3. Begin pedaling and change the resistance of
the pedals as desired.
Note: The console can
display speed and distance in either miles or
kilometers. The letters
MPH or Km/H will
appear while your pedaling speed is displayed to show which unit of measurement is
selected.
As you pedal, change
the resistance of the
pedals by pressing the
Magnetic Resistance
increase and
decrease buttons.
Note: After you press the buttons, it may take a
moment for the pedals to reach the selected resistance level.
To change the unit of measurement, first press the
Display button for a few seconds until the display
becomes blank; then, release the Display button.
4. Follow your progress with the displays.
Press the Fan button repeatedly to change the unit
of measurement.
The upper right
display can show the
elapsed time, the
approximate number
of calories you have
burned, and the distance you have pedaled. The display will change
modes every few seconds.
You can also adjust the volume of the console
tones at this time. Press the Magnetic Resistance
increase and decrease buttons to select a volume
level between 1 and 5.
When you have selected the desired unit of measurement and volume level, press the Display button again.
13
5. Measure your heart rate if desired.
6. Turn on the fan if desired.
If there are
Contacts
sheets of clear
plastic on the
metal contacts
on the handgrip
pulse sensor,
remove the plastic. In addition,
make sure that
your hands are
clean. To measure
your heart rate,
hold the handgrip pulse sensor with your palms
resting against the metal contacts. Avoid moving
your hands or gripping the contacts tightly.
The fan has high, low, and auto speed settings;
while the auto mode is selected, the speed of the
fan will automatically increase or decrease as you
increase or decrease your pedaling speed. Press
the Fan button repeatedly to select a fan speed or
to turn off the fan. Note: If the pedals do not move
for about thirty seconds, the fan will turn off automatically.
Pivot the thumb tab
on the right side of
the fan to adjust
the fan angle.
When your pulse is detected, a heart-shaped symbol will flash in the lower right display each time
your heart beats, one or two dashes will appear,
and then your heart rate will be shown. For the
most accurate heart rate reading, hold the contacts for at least 15 seconds.
Thumb
Tab
7. When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for several seconds, a
series of tones will sound and the console will
pause.
If your heart rate is not shown, make sure that
your hands are positioned as described. Be careful not to move your hands excessively or to
squeeze the metal contacts tightly. For optimal
performance, clean the metal contacts using a soft
cloth; never use alcohol, abrasives, or chemicals to clean the contacts.
If the pedals do not move for about five minutes,
the console will turn off and the displays will be
reset.
14
HOW TO USE A PRESET WORKOUT
the center indicator lights, maintain your current
speed. IMPORTANT: The workout target pacer
is intended only to provide a goal. Make sure
to pedal at a speed that is comfortable for you.
1. Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 13.
2. Select a preset workout.
To select one of the eight preset workouts, press
one of the eight buttons on the right or left side of
the console.
If the resistance level for the current segment is
too high or too low, you can manually override the
resistance level by pressing the Magnetic
Resistance increase or decrease button. However,
when the current segment ends, the resistance of
the pedals will automatically adjust to the resistance level programmed for the next segment.
When you select a preset workout, the name of
the workout and the maximum resistance level will
appear in the display for a few seconds. A profile
of the resistance levels of the workout will also
scroll across the left side of the display.
3. Begin pedaling to start the workout.
If you stop pedaling for several seconds, a series
of tones will sound and the workout will pause. To
restart the workout, simply resume pedaling. The
workout will continue until the last segment of the
workout ends.
Each workout is divided into either 20 or 30 oneminute segments. One resistance level and one
target pace setting are programmed for each segment. Note: The same resistance level and/or target pace setting may be programmed for consecutive segments.
4. Follow your progress with the displays.
See step 4 on page 13.
5. Measure your heart rate if desired.
Profile
See step 5 on page 14.
6. Turn on the fan if desired.
See step 6 on page 14.
7. When you are finished exercising, the console
will turn off automatically.
During the workout, the workout profile will show
your progress (see the drawing above). The flashing segment of the profile represents the current
segment of the workout. The height of the flashing
segment indicates the resistance level for the current segment. At the end of each segment of the
workout, a series of tones will sound and the next
segment of the profile will begin to flash. If a different resistance level is programmed for the next
segment, the resistance level will appear in the
display for a few seconds to alert you. The resistance of the pedals will then change.
See step 7 on page 14.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug an audio cable
(not included) into the jack on the console and into a
jack on your MP3 player or CD player; make sure
that the audio cable is fully plugged in.
During the workout, the workout target pacer will
prompt you to keep your pedaling speed near the
target pace setting for the current segment. When
a left indicator lights, increase your speed; when a
right indicator lights, decrease your speed. When
Next, press the play button on your MP3 player or CD
player. Adjust the volume level using the volume control on your MP3 player or CD player.
15
MAINTENANCE AND TROUBLESHOOTING
Locate the Reed Switch (43). Turn the Crank (21) until
the Magnet (38) is aligned with the Reed Switch.
Loosen, but do not remove, the indicated M4 x 16mm
Screw (49). Slide the Reed Switch slightly closer to or
away from the Magnet, and then retighten the Screw.
Turn the Crank for a moment. Repeat until the console
displays correct feedback.
Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild detergent. IMPORTANT: To
avoid damage to the console, keep liquids away
from the console and keep the console out of
direct sunlight.
CONSOLE TROUBLESHOOTING REPLACEMENT
Most console problems are the result of low batteries.
See assembly step 6 on page 8 for replacement
instructions.
If the handgrip pulse sensor does not function properly, see step 5 on page 14.
43
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, the left shield must be removed.
21
Turn the Crank (21) to the position shown. Using an
adjustable wrench, turn the Left Pedal (24) clockwise
and remove it. Next, remove the indicated M4 x 25mm
Screws (42) and the indicated M4 x 16mm Screws
(49). Then, carefully remove the Left Shield (17).
49
42
21
42
24
42
49
38
49
When the reed switch is correctly adjusted, reattach
the left shield and the left pedal.
HOW TO LEVEL THE EXERCISE BIKE
If the exercise bike rocks on your floor during use, see
HOW TO LEVEL THE EXERCISE BIKE on page 11.
49
42
17
16
EXERCISE GUIDELINES
WARNING:
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise—never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of
stretching. Stretching increases the flexibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
17
PART LIST
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1
1
1
2
1
1
2
1
2
7
1
1
1
2
1
1
1
1
1
2
1
1
2
1
4
1
4
1
1
Description
Key No. Qty.
Frame
Front Stabilizer
Spring
Stabilizer Cap
Seat Post
Rear Stabilizer
Handlebar Cap
Water Bottle Holder
M8 x 47mm Patch Screw
M8 Locknut
Seat Knob
Seat
Upright
Wheel
Handlebar
Console
Left Shield
Right Shield
Resistance Motor
M4 x 22mm Screw
Crank/Pulley
Clamp
Wheel Cover
Left Pedal/Strap
M4 x 12mm Screw
Right Pedal/Strap
Motor Screw
Seat Frame
Stop Bolt
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
*
*
4
1
1
4
4
2
1
1
1
2
1
10
4
1
1
6
1
4
1
9
1
2
2
1
1
1
–
–
Model No. PFEX71608.2 R1011A
Description
M10 x 75mm Carriage Bolt
Pillow Block
Idler Block
M10 Locknut
M5 Washer
Leveling Foot
Upper Wire Harness
Flywheel
Magnet
M8 Curved Washer
C-magnet
M8 Split Washer
M4 x 25mm Screw
Reed Switch/Wire
Crank Bearing Set
M8 x 25mm Patch Screw
M4 x 16mm Round Head Screw
Pillow Block Screw
Drive Belt
M4 x 16mm Screw
Idler Block Screw
M6 Nut
Frame Bushing
Resistance Cable
Seat Post Cap
Lower Wire Harness
Userʼs Manual
Assembly Tool
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
18
EXPLODED DRAWING
Model No. PFEX71608.2 R1011A
16
49
8
7
7
23 10
14
23
1
46
39
9
41 45
41
41
43
33
24
44
55
28
22
49
29
52
32
51
10
11
25
21
10
40
27
38
34
3
33
47
4
19
4
35
35
6
30
34
19
47
37
33
41
10
26
25
50
31
53
52
41
5
54
25
2
30
12
17
45
45
10
42
15
41
36
18
49
41 45
45 41
49
42
20
13
48
49
49
42
45
42
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.proformservice.com/registration.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. Parts and labor are warranted for ninety (90) days from
the date of purchase.
This warranty extends only to the original purchaser (customer). ICONʼs obligation under this warranty is
limited to repairing or replacing, at ICONʼs option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is
shipped to a service center, freight charges to and from the service center will be the customerʼs responsibility. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer will be responsible for a minimal
trip charge. This warranty does not extend to freight damage to the product. This warranty will automatically be voided if the product is used as a store display model, if the product is purchased or transported
outside the USA, if all instructions in this manual are not followed, if the product is abused or improperly
or abnormally used, or if the product is used for commercial or rental purposes. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to the customer.
This warranty provides specific legal rights; the customer may have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 323760 R1011A
Printed in USA © 2011 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement