The SST PROFIBUS connectivity for Rockwell Automation Logix controllers; Rockwell

The SST PROFIBUS connectivity for Rockwell Automation Logix controllers; Rockwell
The SST™ PB3 Remote Module is a unique and powerful solution to provide
PROFIBUS connectivity for Rockwell Automation Logix controllers; Rockwell
users in factory-automation and process-control applications can benefit from
flexible installation designs, reduced commissioning time and lower cabling costs
The SST™ PB3 Remote Module for PROFIBUS is a linking device with on-board
PROFIBUS and Ethernet communication ports that provides a fast and easy solution for
adding PROFIBUS Master and Slave connectivity to any Rockwell Logix controllers. This
unique remote module concept offers the same features of an in-chassis module but can
reduce expensive PROFIBUS cabling costs when used in environments where controller
and field devices are away from each other, sometimes needing to be long distances apart.
SST™ PB3 Remote
Module For PROFIBUS
112016 Remote PLC
Communication Modules
The PB3 module fits both factory-automation and process-control applications. Fully
integrated into Rockwell architecture through user-friendly features such as Add-onInstructions, integrated Ethernet switch and direct access from RSLogix 5000 to I/O data
without the need to write any ladder logic, the module also has complete access to
PROFIBUS DP-V1 services and device diagnostics.
The PB3 Remote Module software for PC includes an engineering console with Rockwell
look-and-feel. The console can configure PROFIBUS Master and Slaves, export
PROFIBUS process variables in RSLogix 5000 (L5X) format, perform automatic DP
Slaves detection and display on-line diagnostics. A CommDTM driver is included in the
software package to enable FrameDTM applications, including AssetCentre, PACTware
and Fieldcare for asset management.
PB3 Remote Module hardware and software are 100% designed, developed and produced
in Molex facilities. For additional information visit:
www.molex.com/link/sstpb3remote.html
Rockwell Logix Controller
FEATURES AND BENEFITS
• Save Money
- Reduce expensive Profibus cabling; the PB3
Remote Module can be installed close to
Profibus field devices
• Save Time
- No ladder logic to write for configuration
and data transfer between PB3 Remote
Module and Logix processor
• Unique Remote Concept
- No Rack limitation of Rockwell
CompactLogix controller backplane
- Flexible installation design; the PB3 module
can be installed at the most convenient place
(cabinet, on-machine, etc)
- Up to 2kbyte Input + 2kbyte Output
PROFIBUS process data
- Fits in with wireless architecture by
connecting a wireless access point to the
Ethernet port
• Fully integrated into Rockwell Architecture
- Add-On-Instructions (.L5X); Import
Profibus I/O process data into RSLogix
5000 tags; allow the user to use process
variable names instead of arrays of Bit,
Byte, Word
- EDS file for RSLinx
• Implement redundancy scenario
- Two Logix controllers connected to a single
PB3 Remote Module; for implementing PLC
redundancy
- 1 Logix controller connected to 2x PB3
Remote Modules; for implementing
PROFIBUS master redundancy
EtherNet/IP
• Conformal coated version improves and
extends the working life and ensures
security and reliability of performance in
extreme or humid conditions
MARKETS AND APPLICATIONS
PROFIBUS
PROFIBUS Devices
• Factory automation
- Automotive
- Material handling
• Process control
- Wastewater treatment
- Agro food industry
- Oil & Gas
- Pharmaceutical
• Complex machine builder
Oil Rig
Food Factory Production Line
SPECIFICATIONS
Product Information
Product Package
Engineering Tools
• Profibus Configuration console
- Remote DP slave configuration and
diagnostics
- Automatic DP slave detection
- Automatic naming of I/O process
variable based on GSD file
- Export of I/O process variables in
RSLogix L5X format
• CommDTM driver for FDT Frame tools
- PROFIBUS Master DP-V1
configuration
- Device diagnostics
- Device detection
Supported OS:
• Windows (32-bit & 64-bit): 7, Vista, 2008
Server, 2003 Server, XP
• VMware 7.0, VMware player 3.1
Technical Data
Memory
• 4 Mb of onboard memory
• 1 Mb of flash memory (user configuration
and firmware upgrade)
Diagnostic LEDs
• 4x Module status
- System Fault
- Profibus State
- Bus Fault
- PLC RUN/PROG
• 3x Ethernet: IP Status, Link
(port 1, port 2)
SST™ PB3 Remote
Module For PROFIBUS
Shielded housing
DIN Rail mounted
Compact Dimensions:
18 x 7 x 16 cm / (7 x 2.75 x 6.30 inches)
112016 Remote PLC
Communication Modules
Protocols
PROFIBUS
• Master
- PROFIBUS DP-V0 Class-1 & Class-2
- PROFIBUS DP-V1 Class-1 & Class-2
• Slave
- PROFIBUS DP-V0
• Supports Master, simultaneous
Master&Slave, and Slave only modes
Conformal coated version
Operating Temperature:
0°C to +65°C
-25°C to +70°C (Coated version)
Storage Temperature: -40°C to +85°C
Power Supply: 24V
Current Consumption:
850 mA @ 5V or 1.75 mA @ 24V
EtherNet/IP
• Explicit Messaging: I/O, DP diagnostic,
DP Slave parameters, DP slave
enable/disable, DP SetSlaveAddress, DPV1 Read/Write, etc
Communication Ports
1x PROFIBUS port
• Sub-D, 9-pin, female
• PROFIBUS RS485 with galvanic
insulation (500 V)
• 9.6 Kbps to 12 Mbps
Conformances
• CE, RoHS, UL Listed, IEC 61131-2
• Class 1 / Div 2 - Groups A,B,C & D for
hazardous (Classified) locations
• RINA Marine Certificate
• Rockwell Encompass Global programme
2x RJ45 Ethernet port switch
• 10/100 Mbps, auto negotiation
• IP Addressing (via 2 rotary switches):
DCHP (default), DHCP with name
(“SST_PB3_xxx”), Factory Fixed,
Factory Selectable, Flash Saved (via
0xF5/0xF6 EIP objects)
• Manages duplicate IP addressing
I/O Size (using 4x CIP Modules)
• Maximum of 1984 input bytes
• Maximum of 1968 output bytes
• 250 words status
PROFIBUS Engineering Console
Add-On-Instructions
Direct Access in RSLogix
to PROFIBUS Tags
ORDERING INFORMATION
Conformal Coated?
Operating
Temperature Range
(*)
Order No.
Engineering No.
112016-5000
SST-PB3-REM
No
0 to +65°C
112016-5001
SST-PB3-REM-CC
Yes
-25 to +70°C
Protocol
Description
MOQ
PROFIBUS
Remote Module with
DTM driver,
DIN Rail, 24V
1pc
(*): Conformal coating material is applied to electronic circuitry to act as protect against moisture, dust, chemicals, and temperature extremes
www.molex.com/link/sstpb3remote.html
Order No. 987650-5731
Printed in EUR/GF/2011.04
©2011, Molex
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement