Mitsubishi Electric PLA-RP100 Specifications

Mitsubishi Electric PLA-RP100 Specifications
13
4-way Ceiling Cassette
PLA
SERIES
Advancements in PLA series improve
style and performance for ensured
indoor comfort
Conventional model
Wide Airflow
Wide-angle outlets distribute airflow to all
corners of the room, ensuring the room is
sufficiently cooled/heated. Horizontal airflow
and a fan speed reduced by 20% compared to
conventional models also contribute to
increased comfort for occupants.
PLA-RP ✽ ✽ BA
Less Cold Draught
The horizontal airflow function prevents
cold draughts from striking the body
directly, thereby keeping the body from
becoming over-chilled.
Horizontal airflow
prevents draughty feeling
Independent Vane Direction
Setting
(i-see Sensor: optional)
Using wired remote controller,
set airflow direction for each vane
(manual setting also possible)
✽ Wired remote controller
(PAR-21MAA/PAR-30MAA) has
Independent Vane Direction Setting.
This function is only available
when indoor unit connects
with PUHZ series.
Use the wired remote controller to set
the airflow pattern of each vane
independently. Easily adjust airflow to
the interior layout and seasonal
conditions, and ensure an even
temperature distribution all the time.
Horizontal
flow
Fixed
PLA-RP60/71
100/125/140BA
Set by remote Vertical
flow
controller
Settings can be changed anytime
using a wired remote controller.
Wave Airflow Mode for Heating
optional
The airflow direction at
each outlet changes
intermittently, providing
a consistent temperature
through-out the room.
● “Wave Airflow” operation image
Vertical
Vertical Vertical Vertical
flow
flow
flow
flow
Simultaneous horizontal and vertical operation ensure
a comfortable room from corner to corner.
● Wave control effect thermograph
Vertical flow
Swing mode
Temperature gap with uneven
temperature distribution
Temperature gap is decreased,
and room is warmed uniformly
Specifications: 4-way ceiling-cassette (PLA)
Indoor unit
PLA-RP60BA
PLA-RP71BA
Outdoor unit
SUZ-KA60VA3
SUZ-KA71VA3
Function
Capacity (min.-max.)
(kW)
Input
(kW)
Cooling
Heating
Cooling
Heating
6.1 (1.1-6.3)
6.9 (0.9-8.0)
7.1 (0.9-8.1)
8.0 (0.9-10.2)
1.78
1.97
2.07
2.19
Rated EER/COP
3.43
3.50
3.43
3.65
Rated AEER/ACOP
3.36
3.44
3.38
3.60
AEER/ACOP (part-load %) ✽
PLA-RP60BA
Indoor unit
PLA-RP71BA
Power supply
Airflow (Lo-Mi2-Mid-Hi)
Sound pressure level
Dimensions
CMM
12-14-16-18
14-16-18-21
L/S
200-233-267-300
233-267-300-350
(dB)
28-29-31-32
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
✽ MEPS compliant at part load
(kg)
28-30-32-34
Unit: 258, Panel: 35
Unit: 23, Panel: 6
14
4-way Ceiling Cassette
Auto Fan Speed Mode
The fan speed is adjusted automatically, thereby maintaining a
comfortable room environment at all times. At the start of operation, a
high fan speed realises quick heating/cooling of the room. Once the
desired temperature is reached, the fan speed is reduced for stable
heating/cooling and greater comfort.
Mi1
Mi2
Hi
360°
i-see Sensor works to
ensure even temperature
distribution and save
energy (requires optional
corner panel)
Fan speed setting by remote controller (four levels)
Lo
4-way cassettes can be equipped with the i-see Sensor,
a radiation-based sensor that monitors floor-level
temperatures throughout the room to
ensure room comfort.
Auto
✽Special setting is required for wireless remote controller.
Floor-level temperature
measured throughout the room.
Quiet Operation
An improved airflow path and powerful highcapacity flow fan contribute to the realisation of
quieter operation.
Power flow fan
i-see Sensor improves energy efficiency and enhances room comfort
The i-see Sensor is an innovative Mitsubishi Electric technology that uses a
radiation-based sensor to monitor temperature throughout the entire room.
When connected to the air conditioner control panel, i-see Sensor works to
maximise room comfort through 360° sensing that covers the whole floor space.
“Pure White” Colour
Stylish, pure white-coloured panels and wired remote controller
express a clean, streamlined image that is a suitable match for any
interior.
■ i-see Sensor Operation
The i-see Sensor rotates 90° and takes 5-second
measurements to accurately determine floor-level
temperatures on all sides of the room.
Other Features
90°
rotation
• Stylish indoor-unit vane covers (when unit is turned off)
• Maximum upward draining of 850mm
• Wireless remote controller available
• Duct flange for Fresh-air Intake
• Branch duct
Automatic
elevation to
four metres
Automatic Grille Lowering
Function (Option)
1.2m
1.6m
Easy to use/Simple maintenance
An automatic grille lowering function capable
of stopping at eight different heights is
available to simplify filter maintenance.
5sec
measurement
90°
rotation
5sec
measurement
5sec
measurement
● The i-see Sensor calculates the temperature by measuring the infrared rays emanating
from the walls and floors, and measuring the floor-level temperature.
● The sensor rotates 360-degrees once every two minutes when there is significant
temperature disparity and once every five minutes when a stable, even temperature has
been reached.
“I Feel” Temperature Control
The sensory temperature is calculated by measuring the air-intake temperature
and the floor temperature. This technology makes it possible to avoid
overcooling or overheating.
2.4m
Elevating (up-down)
controller
Without i-see Sensor
Only intake-air temperature at the
ceiling is measured, resulting in
uneven temperature distribution.
3.2m
Wired remote controller
(PAR-21MAA/PAR-30MAA) has
automatic grille lowering function.
This function is only available
when indoor unit connects with
PUHZ series.
3.6m
With i-see Sensor
Both floor-level and intake-air temperatures are measured, providing operation that creates a comfortable
room environment from ceiling to floor.
Indoor temperature
Indoor temperature
detecting
sensor
detecting sensor
Indoor temperature
Indoor temperature
detecting
sensor
detecting sensor
4.0m
360°
sensing
Area which the
sensor checks
PLA-RP71BA
PUHZ-RP71VHA5
Cooling
7.1 (3.3-8.1)
Heating
PLA-RP100BA
PUHZ-RP100V/YKA2
Cooling
Heating
PLA-RP125BA
PUHZ-RP125V/YKA2
Cooling
Heating
2.95
3.80
3.71
PUHZ-RP140V/YKA2
Cooling
Heating
2.09
2.17
3.40
3.69
4.00
3.80
3.29
3.77
3.27
3.61
3.22
3.49
3.67/3.63
3.54/3.50
3.10/3.08
3.56/3.54
3.10/3.08
3.44/3.42
4.13/4.05
PLA-RP71BA
PLA-RP100BA
3.97
11.5m
4.43
3.95/3.89
PLA-RP125BA
PLA-RP140BA
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
14-16-18-21
20-23-26-30
22-25-28-31
24-26-29-32
233-267-300-350
334-384-434-501
367-417-467-517
400-434-484-534
28-30-32-34
32-34-37-40
34-36-39-41
36-39-42-44
Unit: 298, Panel: 35
Unit: 840, Panel: 950
Unit: 840, Panel: 950
Unit: 25, Panel: 6
Area
Areawhich
whichthe
the
“i-see
i-see Sensor”
Sensor
checks
checks
2.7m
PLA-RP140BA
8.0 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 12.5 (5.5-14.0) 14.0 (5.0-16.0) 13.0 (6.2-15.3) 16.0 (5.7-18.0)
2.50
5sec
measurement
2.0m
2.8m
Packaged elevating (up-down)
controller in the grille (PLP-6BAJ)
can be used when outdoor unit is
both PUHZ series and SUZ series.
90°
rotation
Unit: 27, Panel: 6
Heating
Heating
Set temperature: 23°C
without i-see Sensor
Set temperature: 20°C
with i-see Sensor + Auto Fan Speed
37°C
37°C
25°C
25°C
13°C
13°C
Warm, even heat in winter and cool
comfort in summer is only a phone
call or click away.
Simply contact your nearest Mitsubishi Electric Specialist today and you can find out all there is to
know about how to enhance your living environment. Our specialists are fully qualified to give you
all the right advice on which Mitsubishi Electric Air Conditioning System is right for you.
To locate your nearest Mitsubishi Electric Specialist go to our website
http://www.MitsubishiElectric.com.au
They will determine whether a Compact Inverter System or a Power Inverter System best suits
your needs, both in comfort and efficiency. You can either visit one of our Specialist’s Showrooms,
or they will happily arrange for one of their Consultants to come to your home.
All Mitsubishi Electric Compact and Power Inverter Systems are MEPS (Minimum Efficiency
Performance Standard) Compliant, so you can be sure that they will give you the performance and
efficiency that they were designed to deliver.
these products.
EC97J1132
http://www.mitsubishielectric.com.au/
L-179-7-C7654-H 1204 Printed in Japan (NLP)
Revised publication, effective Apr. 2012.
Superseding publication L-179-7-C7654-G Apr. 2011.
Specifications subject to change without notice.
26
NOTICE
■ Air conditioners in this brochure contain and operate with refrigerant R410A and synthetic oils.
Before attempting any installation work you must read the installation instructions.
New tools, materials and procedures are required to install these products.
Under Australian Law, only persons suitably licensed are permitted to install and service air conditioning units.
Refer to Country, Commonwealth, State or Territory legislation, regulations and industry codes of practice, before installation
of these products.
Recovery and disposal of waste material must comply with Country, Commonwealth, State or Territory guidelines.
■ Do not install indoor units in areas (e.g., mobile phone base stations) where the emission of VOCs such as phthalate
compounds and formaldehyde is known to be high as this may result in a chemical reaction.
■ When installing or relocating or servicing the air conditioners, use only the specified refrigerant (R410A) to charge the
refrigerant lines.
Do not mix it with any other refrigerant and do not allow air to remain in the lines.
If air is mixed with the refrigerant, then it can be the cause of abnormal high pressure in the refrigerant lines, and may
result in an explosion and other hazards.
The use of any refrigerant other than that specified for the system will cause mechanical failure or system malfunction or
unit breakdown. In the worst case, this could lead to a serious impediment to securing product safety.
25
Amount of Necessary Refrigerant
Amount of Necessary Refrigerant ( R410A: kg )
Factory charged
Additional charged
Calculation
Piping length
7m
10m
15m
20m
25m
30m
SUZ-KA25
0.8
0.15
0.3
0.45
—
—
SUZ-KA35
1.05
0.15
0.3
0.45
—
—
SUZ-KA50
1.6
0.06
0.16
0.26
0.36
0.46
SUZ-KA60
1.8
0.06
0.16
0.26
0.36
0.46
SUZ-KA71
1.8
0.165
0.44
0.715
0.99
1.265
Xg = 30g/m × (length-5) m
Xg = 20g/m × (length-7) m
Factory charged
Xg = 55g/m × (length-7) m
Additional charged
Piping length
10 - 30m
31 - 40m
41 - 50m
51 - 60m
61 - 75m
PUHZ-RP71
3.5
0.6
1.2
—
—
PUHZ-RP100/125/140
5.5
0.6
1.2
1.8
2.4
Factory charged
Additional charged
Piping length
PUHZ-RP170/200
10 - 30m
31 - 40m
41 - 50m
51 - 60m
61 - 70m
7.7
0.9
1.8
2.7
3.6
Optional Parts
24
Optional Parts
Part name
Air discharge guide
Air outlet shutter plate
Air protection guide
Control/service tool
Centralized drain pan
Model name
PAC-SG59SG-E
PUHZ-RP71
PAC-SH96SG-E
PUHZ-RP100/125/140/170/200
PAC-SH51SP-E
PLA-RP
PAC-SH63AG-E
PUHZ-RP71
PAC-SH95AG-E
PUHZ-RP100/125/140/170/200
PAC-SK52ST
Flange for fresh-air intake
Liquid refrigerant dryer
for pipe ø9.52
PEAD-RP71
PAC-KE94TB-E
PEAD-RP100/125
PAC-KE95TB-E
PEAD-RP140
i-see sensor corner panel
PAC-SA1ME-E
PLA-RP
PUHZ-RP71/100/125/140/170/200
Shutter plate
PAC-SH51SP-E
PLA-RP
PAC-SG64DP-E
PUHZ-RP71
PAC-SH97DP-E
PUHZ-RP100/125/140/170/200
Joint pipe 9.52 12.7
15.88 19.05
PAC-SG73RJ-E
PAC-SG75RJ-E
PUHZ-RP71/100/125/140/170/200
PUHZ-RP71/100/125/140
PAC-SH94DM-E
PKA-RP
M-NET converter
PAC-SF81MA-E
PUHZ-RP71/100/125/140/170/200
Multi-function casement
PAC-SH53TM-E
PLA-RP
PAC-SG94HR-E
PKA-RP
PAC-SG96HR-E
PCA-RP50/60/71/100/125/140KAQ
PAC-SG97HR-E
PEAD-RP
Filter box
PCA-RP50KAQ
PCA-RP71/100/125/140KAQ
PCA-RP60KAQ
Power supply terminal kit
PAC-KE07DM-E
SEZ-KD
PAC-SG61DS-E
PUHZ-RP71/100/125/140/170/200
PAC-SH65OF-E
PLA-RP
PUHZ-RP
MA & Contact terminal interface
MAC-397IF-E
SLZ-KA, SEZ-KD, PLA-RP60/71*1
PEAD-RP71*1, PCA-RP50/60/71*1
M-NET interface
MAC-399IF-E
SLZ-KA, SEZ-KD, PLA-RP60/71*1
PEAD-RP71*1, PCA-RP50/60/71*1
M-NET &Terminal interface
MAC-333IF-E
SLZ-KA, SEZ-KD, PLA-RP60/71*1
PEAD-RP71*1, PCA-RP50/60/71*1
Wireless remote controller
PAR-FL32MA-E
PEAD-RP
Wireless remote controller
signal receiver
High efficiency filter
Application name
PLA-RP
PAC-SH84DM-E
High efficiency filter element
PAC-SG82DR-E
Wireless remote controller
signal sender
Model name
PAC-KE93TB-E
PAC-SH85DM-E
Drain socket
Part name
PAC-SH59KF-E
PAC-SH83DM-E
Drain pump
Application name
PAC-SH52HR-E
PLA-RP
Remote On/Off adaptor
PAC-SE55RA-E
All indoor units
Remote operation adaptor
PAC-SF40RM-E
All indoor units*2 (excluding PKA-RP)
Remote sensor
PAC-SE41TS-E
All indoor units
Space panel
PAC-SH48AS-E
PLA-RP
Terminal block
PAC-SH29TC-E
PKA-RP for wired remote controller
Connector cable
for remote display
PAC-SA88HA-E
All indoor units
PAR-30MAA
All indoor units
(excluding SLZ-VAL and SEZ-VAL)
PAR-21MAA
All indoor units
(excluding SLZ-VAL and SEZ-VAL)
Wired remote controller
PAR-SL97A-E
SEZ-KD, PLA-RP
PAR-SA9CA-E
SEZ-KD, PEAD-RP
Wireless remote controller kit
(Sender & Receiver)
PAR-SL94B-E
PCA-RP
PAR-SA9FA-E
PLA-RP
Power supply unit
PAC-SC50KUA
All outdoor units
PAC-SH88KF-E
PCA-RP50KAQ
PAC-725AD
All indoor units
PAC-SH89KF-E
PCA-RP60/71KAQ
Multiple remote controller
adaptor
PAC-SH90KF-E
PCA-RP100/125/140KAQ
*1 P series indoor units can be used in combination with SUZ outdoor units.
*2 Unable to use with wireless remote controller
Refrigerant Piping
Capacity
SUZ-KA25
SUZ-KA35
SUZ-KA50
SUZ-KA60
SUZ-KA71
PUHZ-RP71
PUHZ-RP100/125/140
PUHZ-RP170/200
Between indoor & outdoor units
Max. height difference (m)
Max. piping length (m)
12
20
12
30
30
30
30
30
30
20
30
30
30
50
75
75
Pipe size OD (mm)
Thickness (mm)
Liquid: ø6.35
t 0.8
Gas:
ø9.52
t 0.8
Liquid: ø6.35
t 0.8
Gas:
ø9.52
t 0.8
Liquid: ø6.35
t 0.8
Gas:
ø12.7
t 0.8
Liquid: ø6.35
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø25.4
t 1.0
23
Specifications
Specifications: Outdoor Unit
Outdoor unit
PUHZ-RP170V/YKA2
PUHZ-RP200YKA2
External finish
Munsell 3.0Y 7.8/1.1
Power supply
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
(kW)
Compressor output
140 (2,330)
Cooling mode
58
Silent mode
56
Heating mode
59
(dB)
76
Height
(mm)
1,338
Width
(mm)
1,050
Depth
(mm)
330
Sound level
Dimensions
3.6
CMM (L /S)
Airflow (cooling/heating)
Sound pressure level (dB)
3.0
Weight
(kg)
Chargeless piping length
(m)
30
Max. piping length
(m)
75
V: 127 Y: 131
136
Discharge thermo, HP switch
Protection device
Rated running current (cooling/heating)
(A)
V: 19.4/23.9 Y: 6.8/8.3
8.2/9.7
Breaker size
(A)
V: 40 Y: 32
32
*Above specifications are for outdoor units only.
Notes for All Specifications
Rating conditions (AS/NZS 3823)
Cooling - Indoor: 27°C (80°F) DB, 19°C (66°F) WB
Outdoor: 35°C (95°F) DB
Heating - Indoor: 20°C (68°F) DB
Outdoor: 7°C (45°F) DB, 6°C (43°F) WB
Refrigerant piping length (one-way): 5m (16ft.)
Total input based on the indicated voltage (indoor/outdoor)
50Hz
Indoor
Outdoor
Single-phase, 230V
Single-phase, 230V/ Three-phase, 400V
Guaranteed Operating Range
SUZ-KA
PUHZ
25/35
50/60/71
71/100/125/140/170/200
Upper limit (DB)
46°C
43°C
46°C
Lower limit (DB)
–10°C
–15°C
–5°C (–15°C )
Upper limit (DB)
24°C
24°C
21°C
Lower limit (DB)
–15°C
–15°C
–20°C
Cooling
Heating
With the optional air protection guide, the operation at –15°C outdoor temperature is possible.
Sound Pressure Level
• Sound pressure measurements were conducted in an anechoic chamber.
• The actual noise level depends on the distance from the unit and the acoustic environment.
22
Specifications
Specification: Outdoor Unit
Outdoor unit
SUZ-KA25VA3
SUZ-KA35VA2
SUZ-KA50VA3
External finish
Munsell 3.0Y 7.8/1.1
Power supply
Single-phase, 50Hz, 230V
(kW)
0.65
0.85
0.9
1.2
34 (568)/32 (534)
33 (551)
49 (818)
51 (850)/49 (816)
50 (835)/48 (800)
Cooling mode
46
47
53
55
Heating mode
46
48
55
55
59
61
68
69
Airflow (cooling/heating)
CMM (L /S)
(dB)
Sound level
Dimensions
SUZ-KA71VA3
0.55
Compressor output
Sound pressure
level (dB)
SUZ-KA60VA3
Height
(mm)
550
850
880
Width
(mm)
800
840
840
Depth
(mm)
285
330
330
Weight
(kg)
Chargeless piping length
(m)
Max. piping length
(m)
20
30
Breaker size
(A)
10
20
30
33
50
53
53
7
*Above specifications are for outdoor units only.
Outdoor unit
PUHZ-RP71VHA5
PUHZ-RP100V/YKA2
PUHZ-RP125V/YKA2
External finish
Munsell 3.0Y 7.8/1.1
Power supply
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
(kW)
Compressor output
1.6
1.9
60 (1,000)
110 (1,830)
Cooling mode
47
49
50
50
Silent mode
44
46
47
47
Heating mode
48
51
52
52
(dB)
66
69
70
70
Height
(mm)
943
1,338
Width
(mm)
950
1,050
Depth
(mm)
330
330
Airflow (cooling/heating)
Sound pressure
level (dB)
Sound level
Dimensions
PUHZ-RP140V/YKA2
CMM (L /S)
2.4
120 (2,000)
Weight
(kg)
67
Chargeless piping length
(m)
30
30
Max. piping length
(m)
50
75
Protection device
2.9
V: 118 Y: 119
V: 120 Y: 121
Discharge thermo, HP switch
Rated running current
(cooling/heating)
(A)
9.05/9.64
Breaker size
(A)
25
V: 12.64/13.58 Y: 4.42/4.75
V: 16.36/16.90 Y: 5.73/5.91
V: 32 Y: 16
V: 17.17/19.23 Y: 6.01/6.73
V: 40 Y: 16
*Above specifications are for outdoor units only.
21
System Controls
System Controls ( SUZ and Mr. Slim Power Inverter only )
Versatile system controls can be realised by using optional parts, relay circuits, control panels, etc.
MAJOR SYSTEM CONTROL
System Examples
Indoor Unit
S Series & P Series Indoor Unit
P Series Indoor Unit
S Series Outdoor
P Series Outdoor
Outdoor Unit
A
Details
PAR-30MAA Control
PAR-21MAA Control
Major Optional Parts Required
Standard equipment (for indoor units
compatible with wired remote controllers)
• PAR-30MAA (Wired remote controller)
• PAR-21MAA (Wired remote controller)
• One remote controller can control multiple
air conditioners with the same settings
simultaneously.
• One remote controller can control up to 16
refrigerant systems.
• Up to two remote controller can be
connected.
<S Series Outdoor Unit>
• MAC-397IF-E/MAC-333IF-E (Interface)
• PAR-30MAA (Wired remote controller)
• PAR-21MAA (Wired remote controller)
• Group of air conditioners can be controlled
by MELANS system controller (M-NET).
<S Series Outdoor Unit>
• MAC-399IF-E/MAC-333IF-E
• MELANS System controller
• PAC-SC50KUA (power supply unit)
PAR-30MAA
PAR-21MAA
B
System Group Control
MAC-397IF-E
MAC-333IF-E
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
C
M-NET Connections
Outdoor
unit
Outdoor
unit
Indoor unit
Indoor unit
PACSC50KUA
Power
supply kit
Indoor
unit
City Multi
indoor unit
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
MAC-399IF-E
MAC-333IF-E
MELANS
system controller
(AG-150A etc)
PAC-SC50KA
Power supply
unit
Indoor
unit
MELANS
system controller
(AG-150A etc)
PAR-30MAA
PAR-21MAA
<P Series Outdoor Unit>
• PAR-30MAA (Wired remote controller)
• PAR-21MAA (Wired remote controller)
<P Series Outdoor Unit>
• PAC-SF81MA-E (M-NET converter)
• MELANS System controller
• PAC-SC50KUA (power supply unit)
M-NET adapter
PAC-SF81MA-E
FOR P SERIES AND S SERIES INDOOR UNITS
System Examples
Wired remote controller
A
Wireless remote controller
2-remote Controller
Control
• Up to two remote controllers can be
connected to one group.
With two remote controllers, control
can be performed locally and
remotely from two locations.
PAR-SL97A-E
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
* Set "Main" and "Sub"
remote controllers.
(Example of 1 : 1 system)
B
Operation Control by
Level Signal
Air conditioner can be started/
stopped remotely. In addition,
On/Off operation by local remote
controller can be prohibited/permitted.
Relay box (to be purchased locally)
Adapter for
remote
On/Off
Wired remote
controller
Wired remote
controller
Remote Display of
Operating Status
Remote operation adapter/
Connector cable for remote display +
Relay box
PAR-30/
21MAA
(Example of 1 : 1 system)
E
Timer Operation
Allows On/Off operation with
timer
*For control by an external
timer, refer to B Operation
Control by Level Signal.
PAR-30MAA
(Example of 1 : 1 system)
• Operation other than On/Off (e.g., adjustment of temperature, fan speed, and airflow)
can be performed even when remote
controller operation is prohibited.
• Timer control is possible with an external
timer.
• Adapter for remote On/Off
PAC-SE55RA-E
• Relay box (to be purchased locally)
• Remote control panel (to be purchased
locally)
• The pulse signal can be turned On/Off.
• Operation/emergency signal can be
received at a remote location.
• Connector cable for remote display
PAC-SA88HA-E / PAC-725AD
(10 pcs. x PAC-SA88HA-E)
• Relay box (to be purchased locally)
• Remote control panel (to be purchased
locally)
• Operation/emergency signal can be
received at a remote location (when
channeled through the PAC-SF40RM
no-voltage signal, when channeled through
the PAC-SA88HA-E DC 12V signal).
• Remote display panel (to be purchased
locally)
• Connector cable for remote display
PAC-SA88HA-E / PAC-725AD
(10 pcs. x PAC-SA88HA-E)
• Relay box (to be purchased locally)
• Remote operation adapter
PAC-SF40RM
PAR-SL97A-E
Relay box (to be purchased locally)
Connector
cable for
remote
display
Remote
control
panel
PAR-SL97A-E
(Example of 1 : 1 system x 2)
Remote operation adapter/
Connector cable for remote display +
Relay box
Operating status can be
displayed at a remote location.
Remote
display
panel
• Wired Remote Controller
PAR-30MAA
PAR-21MAA
(for PKA, PAC-SH29TC-E is required)
• Wireless Remote Controller
PAR-SL97A-E (for SEZ and PEAD)
• Wireless Remote Controller Kit for PCA
PAR-SL94B-E
(Example of 1 : 1 system x 2)
Connector
cable for
remote
display
(Example of 1 : 1 system x 2)
D
Remote
control
panel
Relay box (to be purchased) locally)
Remote
control
panel
• Both wired and wireless remote controllers
can be used in combination.
Major Optional Parts Required
(Example of Simultaneous Twin)
Adapter for
remote
On/Off
Remote
control
panel
Operation Control by
Pulse Signal
* When using wired and
wireless remote controllers
Relay box (to be purchased) locally)
(Example of 1 : 1 system x 2)
C
Details
Remote
display
panel
*Unable to use with wireless remote controller
PAR-SL97A-E
(Example of Simultaneous Twin)
• Weekly Timer:
On/Off and up to 8 pattern temperatures can
be set for each calendar day. (Initial setting)
• On/Off Timer:
On/Off can be set once each within 72 hr in
intervals of 5-minute units.
• Auto-off Timer:
Operation will be switched off after a certain
time elapse. Set time can be changed from
30 min. to 4 hr. at 10 min. intervals.
*Simple Timer and Auto-off Timer
cannot be used at the same time.
Standard functions of PAR-30MAA
20
Main Features
Main features of Mr. Slim Inverter Units
Indoor unit
SLZ-VA
SLZ-VAL
SEZ-VA
SEZ-VAL
SUZ
SUZ
SUZ
SUZ
PEAD
PLA
PEA
PKA
PUHZ
PUHZ
PCA-KA
Combination
Outdoor unit
Energy Saving
Felt Temperature Control
(i-see Sensor)
PUHZ
SUZ
Opt
Opt
Opt
Opt
PUHZ
SUZ
PUHZ
SUZ
Opt
Opt
Opt
Opt
Pure White
Attractive
Auto Vane
Fresh-air Intake
High-efficiency Filter
Air Quality
Oil Mist Filter
Long-life filter
Filter Check Signal
Opt
Horizontal Vane (Auto Swing)
Air Distribution
High Ceiling Mode
Auto Fan Speed Mode
On/Off Operation Timer
Auto Change Over *1
Auto Restart
Convenience
Low-temperature Cooling
Low-noise Operation (Outdoor Unit)
Rotation, Back-up and 2nd Stage
Cut-in Function
Opt
Opt
PAR-21MAA Control *2
Opt
Centralised On/Off Control *2
Opt
Opt
Opt
Opt
System Group Control *2
Opt
Opt
Opt
Opt
M-NET Connection *2
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
System Control
Reuse of Existing Wiring
Drain Pump
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Installation
Pump Down Switch
Flare Connection
Self-Diagnosis Function
(Check Code Display)
Maintenance
Failure Recall Function
*1 When multiple indoor units connected to an MXZ outdoor unit are running at the same time, simultaneous cooling and heating is not possible.
*2 Please refer “System Control” on page 21 for details.
*3 Not available with PEA-RP140/170/200WJA models.
*3
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement