Viking | VESO5302TSS | Specifications | Viking VESO5302TSS Specifications

Viking VESO5302TSS Specifications
Viking Use & Care Manual
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information
call 1-888-VIKING1 (845-4641)
or visit the Viking Web Site at
vikingrange.com
Professional Custom Built-In Electric
Touch Control Single and Double Ovens
F20813A EN
(072911)
Congratulations
Your purchase of this product attests to the importance you
place upon the quality and performance of the major
appliances you use. With minimal care, as outlined in this
guide, this product is designed to provide you with years of
dependable service. Please take the few minutes necessary to
learn the proper and efficient use and care of this quality
product.
Some key features of this appliance include:
• 14 different cooking modes to make even your most
challenging baking projects a success.
• Split baking and broiling elements, reducing your
preheating time and heating your food more evenly.
• An extra-large reversing fan, allowing you to cook even
large quantities of food more quickly and evenly.
• Four convection modes, offering greater air circulation to
shorten cooking times and cook foods more evenly.
• Dual broiling elements, producing intense radiant heat for
faster broiling and a larger coverage area.
• Three broiling modes, including a special low-broil mode for
delicate broiling and top-browning.
• A profiled, hidden bake element for easier cleaning.
Warnings
WARNING
If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury
or death.
WARNING
NEVER use this appliance as a space heater to heat or warm
the room. Doing so may result in carbon monoxide poisoning
and overheating of the oven.
WARNING
Do not use commercial oven cleaners inside the oven. Use of
these cleaners can produce hazardous fumes or can damage
the porcelain finishes.
WARNING
NEVER cover any slots, holes or passages in the oven bottom
or cover an entire rack with materials such as aluminum foil.
Doing so blocks air flow through the oven and may cause
carbon monoxide poisoning. Aluminum foil linings may also
trap heat, causing a fire hazard.
WARNING
• Six adjustable rack positions with the largest usable baking
space available in this class.
To avoid sickness and food waste when using automatic time
baking:
Your complete satisfaction is our ultimate goal. If you have
any questions or comments about this product, please
contact the dealer from whom you purchased this product, or
contact our consumer support center at 1-888-VIKING1.
• Do not use foods that will spoil while waiting for cooking to
start, such as dishes with milk or eggs, cream soups, custards,
fish, pork, poultry, or foods with stuffing.
We appreciate your choosing a Viking Range Corporation
product and hope that you will again select our products for
your other major appliance needs. For more information
about the complete selection of Viking products, contact your
dealer or go to vikingrange.com.
• Any food that has to wait for cooking to start should be very
cold or frozen before it is placed in the oven.
• Do not use foods containing baking powder or yeast when
automatic time baking. They will not rise properly.
• Do not allow food to remain in the oven for more than two
hours after the end of the cooking cycle.
WARNING
To avoid sickness and food waste, do not allow defrosted food
to remain in the oven for more than two hours.
2
3
Table of Contents
Table of Contents
Getting Started
Cooking Tips
Important Safety Instrutions ________________________ 6
Rack Positions ______________________________________ 39
Preheat ____________________________________________ 40
Product Controls
Oven Control Panel________________________________ 8
Built-In Electric Oven Features ______________________ 10
Touch Pad Functions _______________________________ 11
Programming Modes
Pan Placement Tips _________________________________ 42
Baking Tips ________________________________________ 42
Multiple Rack Baking _______________________________ 43
Conventional Baking Chart __________________________ 44
Convection Baking Chart ____________________________ 45
Clocks and Timers
Solving Baking Problems ____________________________ 46
Setting the Clock _____________________________ 16
Broiling Tips ________________________________________ 47
Setting the Timer _____________________________ 17
Broiling Chart ______________________________________ 48
Cook Time and Stop Time ____________________ 18
Roasting Tips _______________________________________ 49
Conventional Roasting Chart ________________________ 50
Oven Settings
Brightness ____________________________________ 20
Degree Format (Fahrenheit or Celsius) _________ 20
Tones ________________________________________ 21
Tone Volume _________________________________ 23
Convection Roasting Chart __________________________ 51
Product Care
Cleaning and Maintenance __________________________ 52
Self-Clean Cycle _______________________________ 54
Replacing Light _____________________________________ 56
Timeouts ____________________________________ 23
Trouble Shooting ___________________________________ 57
Clock Format (12-hour or 24-hour) _____________ 24
Error Handling ______________________________________ 57
Sabbath Mode _______________________________ 25
Service Information _________________________________ 58
Showroom Mode __________________________________ 25
Warranty ___________________________________________ 59
Lock and Unlock ______________________________ 26
Interior Oven Lights ___________________________ 26
Recipe Function ___________________________________ 27
Warming Modes __________________________________ 29
Bake Modes ______________________________________ 30
Broil Modes ______________________________________ 33
Roast Modes ______________________________________ 35
Meat Probe _______________________________________ 37
4
5
Getting Started
Important Safety Instructions
• Use this appliance only for its intended use as described in
this manual. Never use your appliance for warming or
heating the room. This is based on safety considerations.
• Do not heat unopened food containers; build-up of pressure
may cause the container to explode and result in injury.
• Your unit should be installed by a qualified technician. The
appliance must be installed and electrically grounded
according to local codes.
• Do not attempt to repair or replace any part of this
appliance unless specifically recommended in this manual.
All servicing should be referred to a qualified technician.
Warranty service must be performed by an authorized
service agency.
• Children should not be left alone in the kitchen while the
oven is in use. They should never be allowed to sit or stand
on any part of the appliance.
CAUTION: Do not store items of interest to children over
the unit. Children climbing to reach items could be seriously
injured. They should never be allowed to sit or stand on any
part of the appliance.
• GREASE - Grease is flammable and should be handled
carefully. Do not use water on grease fires. Flaming grease
can be extinguished with baking soda or, if available, a
multipurpose dry chemical or foam-type extinguisher. Let fat
cool before attempting to handle it. Do not allow grease to
collect around the oven or in vents. Wipe up spillovers
immediately.
• Loose-fitting or hanging garments should never be worn
while using the appliance. Do not drape towels or materials
on oven door handles. These items could ignite and cause
burns.
• Use only dry potholders. Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot surface areas. Do not use a towel or
other bulky cloth.
• Always position oven racks in desired location while oven is
cool. If rack must be moved while oven is hot, do not let
potholder contact hot heating element in oven.
• Use care when opening oven door. Let hot air or steam
escape before removing or replacing food. Hot air or steam
can cause burns to hands, face and/or eyes.
• Keep oven vents unobstructed. The oven vent is located at
the front of the oven and vents into the room.
• Do not clean door gasket. It is essential for a good tight
seal. Care should be taken not to rub, damage, or move
the gasket.
• No commercial oven cleaner or oven liner protective
coating such as aluminum foil should be used in or around
any part of the oven. Improper oven liners may result in a
risk of electric shock or fire. Keep oven free from grease
buildup.
• Before self-cleaning the oven, remove broiler pan, broiler
grid, oven racks, and other utensils. Do not use your oven
to clean other parts. A fan noise should be heard during
the cleaning cycle. If not, call service before self-cleaning
again.
• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN. Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
oven may become hot enough to cause burns, such as the
oven vent opening, the surface near the vent opening, and
the oven door window.
• Keep area clean and free from combustible materials,
gasoline, and other flammable liquids. Never use your oven
as a storage space. Combustible items (paper, plastic, etc.)
may ignite, and metallic items may become hot and cause
burns.
6
7
Getting Started
Important Safety Instructions
Oven Control Panel
Oven Control Panel
Oven Function and
Temperature Controls
The Electronic Timing Center is
used to program and control all
timing functions.
IMPORTANT–The time-of-day
must be set before any other
program can be used.
Oven Selector
Controls
Electronic Keypad
Entry
The Oven Selector Controls
are used to turn the upper or
lower oven on and off.
The Electronic Keypad
Entry is used to program
and control all oven
functions.
Product Controls
Product Controls
Each oven function has a separate setting.
(See descriptions)
The SET control up and down arrows can be
used to set any temperature from
150°F (65.6°C) to 550°F (287.8°C).
Electronic Timing Center
Oven Selector Options
Bake
Broil
TruConvecTM
Conventional, single-rack baking
(breads, cakes, cookies, pastry, pies,
entrees, vegetables)
Three conventional broil settings for cuts of
flat pieces of meat or meat 1-2 inches thick
Multi-rack baking for breads, cakes,
cookies (up to 6 racks of cookies at once)
Convection Broil
Convection Roast
Convection Bake
Faster than regular broiling with less smoke
generation for thicker meats
Roasting whole turkeys, whole chickens,
hams, etc.
Multi-rack baking for heavier or frozen
foods (e.g., frozen pies, pizzas, entrees,
vegetables)
Dehydrate
Self-Clean
A self-cleaning cycle using high heat to
burn off soils and deposits
Defrost
Using the convection fan over a
period of time, water is removed
from food by evaporation
Natural defrosting of food using fan
without heat
Meat Probe*
Creates an optimal environment for the
rising of yeast in many kinds of dough
Automatically turns the oven off when the
internal temperature of the meat being
roasted is reached
Auto Roast*
Automatic searing of the outside of
meats; simplifies roasting
Recipes*
Accesses, programs, and saves cooking
cycles from favorite recipes
Oven Light Controls
Controls the interior lights in the upper
and lower ovens
Oven Lock
Childproofing feature preventing the
controls from being activated when the
oven is not in use
Proof*
Settings
Accesses custom features such as display
brightness, Sabbath/Showroom modes,
and tones
*Note: Professional Series Premiere model control panel and features are shown.
8
9
Built-In Electric Oven Features
Oven Control Panel
Oven Function
and Temperature
Controls
Broil Element
Interior
Oven Light
Meat Probe Jack
Oven Racks
(3/upper oven;
3/lower oven)
TruConvec™
Element
(behind baffle)
Both ovens share the temperature control. To use this feature, select the
upper or lower oven, and then set the desired temperature. The controls
can be set at any temperature from 150° F (65.6° C) to 550° F (287.8° C).
Electronic Keypad Entry
Both ovens share the electronic keypad entry. The alphanumeric keys can
be used to program and control all oven functions.
Oven Function Selector Control
Both ovens offer 14 separate cooking modes from which you can choose
the one that best meets your cooking needs.
Bake
Bake Element
Interior Oven Light
Lower Oven
When using this function, fullpower heat is radiated from
the bake element in the
bottom of the oven cavity,
while supplemental heat is
radiated from the broil
element. This function is
recommended for single-rack
baking. Use this setting for
baking,
roasting,
and
casseroles.
Bake
Broil
Professional Series Premiere double oven is shown above.
Meat Probe (available on Premiere models)
Cable
Probe
Handles
This function is a dry-heat
cooking method, using direct
or radiant heat on three
different
settings:
low,
medium and high. The
distance between the foods
and the broil elements
determines broiling speed.
This function is recommended
for small, individualized cuts,
such as steaks, chops and
patties.
Broil
Plug
10
11
Product Controls
Product Controls
Temperature Control
Electronic Key
Pad Entry
Model/Serial
Number Plate
(under control
panel)
Touch Pad Functions
Touch Pad Functions
With this function, only the rear
element operates at full power.
There is no direct heat from the
bottom or top elements, and
the motorized fan in the rear of
the oven circulates for even
heating. Use this setting for
foods that require gentle
cooking, such as pastries,
soufflés, yeast breads, quick
breads, and cakes. This setting
produces breads, cookies, and
TruConvecTM
other baked goods with an
even texture and golden crusts. No special bakeware is required. Use this
function for single-rack baking, multiple-rack baking, roasting, and preparation
of complete meals. This setting is also recommended when preparing large
quantities of baked goods at one time.
Convection Bake
With this function, the bottom
element operates at full power,
and the top broil element
operates at supplemental
power. The motorized fan in the
rear of the oven circulates
heated air, providing a more
even heat distribution. This
even circulation of air equalizes
the temperature throughout
the oven cavity and eliminates
convection bake
the hot and cold spots found in
conventional ovens. A major benefit of convection baking is the ability to
prepare food in larger quantities using multiple racks. When roasting using this
setting, cool air is quickly replaced, searing meats on the outside and retaining
more juices and natural flavor on the inside with less shrinkage. With this
heating method, foods can be baked and roasted at the same time with
minimal taste transfer, even when different dishes are involved, such as cakes,
fish, or meat. The hot air system is especially economical when thawing frozen
food. Use this setting for baking and roasting.
12
Convection Broil
Using this function, the top
element operates at full
power. This function is exactly
the same as regular broiling
with the additional benefit of
air circulation by the
motorized fan in the rear of
the oven. Smoke is reduced
since the airflow also reduces
peak temperatures on the
food. Use this setting for
broiling thick cuts of meat.
convection broil
Convection Roast
With this function, the
convection element runs in
conjunction with the inner
and outer broil elements.
The reversible convection
fan runs at a higher speed
in each direction, allowing
the moisture to be sealed
inside large cuts of meat,
such as roasts. This saves
time when compared with
single fan convection roast
modes. Use this setting for
whole turkeys, whole
chickens, and roasts.
convection roast
NOTE: Because this function uses a high-speed convection fan for
optimum cooking performance, some noise may be noticed from this
high fan speed. This is normal.
Defrost
With the temperature control off, a motorized fan in the
rear of the oven circulates air. This fan accelerates natural
defrosting of the food without heat.
NOTE: To avoid sickness and food waste, do not allow
defrosted food to remain in the oven for more than
two hours.
13
Product Controls
Product Controls
TruConvec™
Touch Pad Functions
Touch Pad Functions
Touch Pad Functions
Dehydrate
With this function, a motorized fan in the rear of the oven
circulates warm air. Over a period of time, the water is
removed from the food by evaporation. Removal of water
inhibits growth of microorganisms and retards the activity
of enzymes. It is important to remember that dehydration
does not improve quality; only fresh, top-quality foods
should be dehydrated in your oven.
Proof*
This function uses a low temperature to create an optimal
environment for the yeast to rise in many types of dough.
Recipes*
Self-Clean
The self-cleaning cycle is designed to eliminate the need
for scrubbing and scouring food baked onto the oven
interior. During this cycle, the oven uses high temperatures
to burn off soils and deposits. An integral smoke eliminator
reduces odors associated with the soil burn-off. A powder
ash residue is left in the bottom of the oven after
completion of the self-clean cycle. When the oven has
cooled, remove any ash from oven surfaces with a damp
sponge or cloth.
Interior Oven Light Controls
The upper and lower ovens have interior oven lights
controlled by the right touch pad. Push the light button to
turn the interior oven lights on and off.
Oven Lock
Auto Roast*
This child protection function prevents the oven controls
from being activated when the oven is not in use.
This function further simplifies roasting by automatically
searing the outside of meats, raising the pre-set
temperature by 100° F for a short time to sear the outside
of the meat. The temperature then returns to the pre-set
temperature in the standard convection roast mode.
Settings
Use this function to access, program, and customize special
features of your oven. Special features include tones,
timeouts, display brightness, and the Sabbath mode.
Meat Probe*
The probe temperature function is used to automatically
turn the oven off when the internal temperature of meat
being cooked is reached.
*Note: The AUTO-ROAST, PROOF, RECIPE and PROBE functions are
included on the Premiere models.
14
15
Product Controls
Product Controls
This setting accesses, programs, and saves
cooking cycles from favorite recipes.
Clocks and Timers
Electronic
Timing Center
3. Use the up and down arrows to change the current time.
The Electronic Timing
Center is used to
program and control
all timing functions on
your Viking appliance.
It has four display and programming modes that are activated by
the four push buttons. Both the Timer and the Cook Time/Stop
Time Modes can be used to time cooking periods. These
features can even be used at the same time when both ovens are
in use. For example, you can time-bake a casserole in the upper
oven using the Cook Time/Stop Time Mode, while broiling in the
lower oven using the Timer. One oven can also be cleaned while
timing foods in the other oven using the timer.
Timer Alarm
• At the end of a program, the alarm will consist of three beeps,
followed by two beeps every 10 seconds until the “CLEAR”
button is pressed.
• Whenever a valid function key is pressed or when a control
function starts automatically, one beep will sound.
• When an invalid function key is pressed, two beeps will sound.
Setting the Clock
The time-of-day must be set before any other program can be
used. When your oven is first connected to the power in your
home, the timer display will show 12:00.
To Program the Time-Of-Day:
1. Press either the “UPPER OVEN” or “LOWER OVEN” button.
2. Press the “CLOCK SET” button. The clock will begin to flash.
The word “CLOCK” will be lit on the display.
3. Type in the correct time on the electronic number keypad.
4. Press the “CLOCK SET” button again. The clock is now set.
Alternate Method:
1. Press either the “UPPER OVEN” or “LOWER OVEN” button.
2. Press the “CLOCK SET” button. The clock will begin to flash.
The word “CLOCK” will be lit on the display.
16
Press and Release
Press and Hold
▲
Time increases by
one minute
Time increases by
10 minutes
▼
Time decreases by
one minute
Time decreases by
10 minutes
4. Press the “SET” button on the temperature control or the
“CLOCK SET” button on the electronic timing center. The
clock is now set.
Note: The time-of-day cannot be changed while there is a
Bake Hours or Start Time cycle programmed into the timer.
Setting the Timer
The timer is designed for accurate timing and is ideal for baking
delicate items such as biscuits, cookies, and popovers, and for
precise broiling. The timer can be used for timing up to 12 hours.
When setting the timer, the time displayed will decrease in 1
minute increments. When the timer counts down to 1 minute, the
timer alarm will give one short beep and the display will change
to seconds. When the timer reaches 0:00, the alarm will give one
long beep.
To Set the Timer:
1. Press the “TIMER” button. The timer will display “0:00” and
the word “TIMER.”
2. Type in the desired duration time on the electronic number
keypad.
3. The timer will start automatically. (To cancel the entry, press the
“CLEAR” button on the left side of the control panel before
the count down begins and the time is still flashing.)
4. The timer is now set.
Alternate Method:
1. Press the “TIMER” button. The timer will display “0:00” and
the word “TIMER” will be lit on the display.
17
Programming Modes
Programming Modes
Clocks and Timers
Clocks and Timers
Clocks and Timers
2. Use the up and down arrows to set the timer.
6. Press “SET” or “ENTER” if the cook time is correct. Cook time
is set.
Press and Release
Press and Hold
▲
Time increases by
one minute
Time increases by
10 minutes
▼
Time decreases by
one minute
Time decreases by
10 minutes
Cook Time and Stop Time
With the Viking oven, you can choose what times you need to
start and stop cooking your food. The Cook Time and Stop Time
functions allow you to program your preferences.
Here’s how it works:
It is 2:00 PM and you would like to have your dinner ready at 6:00
PM. By programming your oven with a two-hour cook time and a
6:00 PM stop time, your oven will delay cooking until 3:50 PM. At
3:50, the oven will begin preheating. At 4:00 PM, the oven will
begin its two-hour cook time.
Cook Time and Stop Time Facts:
Both ovens can be set individually for Cook Time and Stop Time
functions.
To Set Cook Time:
1. Select UPPER OVEN or LOWER OVEN.
2. Select an oven function and temperature before setting Cook
Time and Stop Time functions.
3. Press “COOK TIME” and the display will flash “0:00” and
“COOK TIME” will be lit below.
4. Use numeric keyboard to enter the amount of time needed for
cooking.
5. After the time is entered, the display will show “COOK TIME”
under the timer field. (To cancel the entry, press the “CLEAR”
button on the left side of the control panel.)
18
To Set Stop Time:
1. Set Cook Time, following the steps provided in the previous
section.
2. Press “STOP TIME” and “STOP TIME” will be lit on the display.
3. Use numeric keyboard to enter the time you want to stop for
cooking.
4. After the time is entered, the display will flash the time. (To
cancel stop time, press the “CLEAR” button on the left side of
the control panel.)
5. Press “SET” or “STOP TIME” if the stop time is correct. Stop
time is set and will begin when the oven is preheated.
NOTE: Display will show Cook Time and Stop Time. If you
have entered a time incorrectly, you will hear a long beep
and the display will not change.
NOTE: To cancel stop time during its cycle, press “STOP TIME”
and then press the “CLEAR” button on the left side of the oven
control. Cooking will continue if the oven is on.
When Stop Time has been reached:
1. Your oven will sound three beeps, and “HOLD” will appear on
the display.
• The oven will stay at 150º F in hold mode for two hours.
• After two hours, the oven will sound four long beeps and
shut off.
2. Press “OFF” to turn off the oven manually.
19
Programming Modes
Programming Modes
3. Press “SET” or “TIMER” to program the timer. (To cancel the
entry, press the “CLEAR” button on the left side of the control
panel.)
4. The timer is now set.
NOTE: To cancel cook time during its cycle, press “COOK TIME”
and then press the “CLEAR” button on the left side of the oven
control. Cooking will continue if the oven is on.
Oven Settings
Oven Settings
These functions allow you to customize controls to suit your
specific tastes.
Tones
Brightness
This mode offers users the ability to decrease or increase the
intensity of the brightness of the electronic display panel. Users
may choose between four levels of brightness: 25%, 50%, 75%,
and 100%.
This function allows you to define the duration of tones and the
number of tones for different events. Your oven is programmed
with different audible tones as demonstrated by the following
chart:
Used in…
Number
of Tones
Duration
(measured
in seconds)
1 Minute Left
Min/Sec or Cook
Timer
1
1
Autostart
Cooking mode or
timer starts without
pressing Set or
Enter
2
0.1
End of Hold
Cook Time/Stop
Time
4
1
Timer Expired
Min/Sec or Cook
Timer
3
1
Failure
RTD error/Latch
error
5
1
Invalid Entry
Error in
programming
3
0.1
Periodic
Reminder
After cooking mode
finishes or during
programming to
prompt action by
user
1
0.1
Key Press
Information Entry
1
0.1
Invalid Key
Information Entry
3
0.1
Repeat Key
Information Entry
0
0
Oven Light
Off
Turning light off
2
0.1
Oven Light
On
Turning light on
1
0.1
Programming Modes
To customize brightness level:
1. Press “SETTINGS.” Settings menu will appear in display.
2. Press the up or down arrows until “BRIGHTNESS: 100%”
appears in the display. (The % shown is the current
brightness level.)
3. Press “ENTER” to change brightness level. Current value
will flash.
4. Move up and down arrows to select desired brightness
level.
5. Press “ENTER” to confirm brightness level.
6. To exit the Settings menu, press “SETTINGS.”
Degree Format
The oven has been preset to the Fahrenheit temperature scale.
With this feature, users can switch to the Celsius temperature
scale.
To change degree format to Celsius:
1. Press “SETTINGS.” Settings menu will appear in display.
2. Press the up or down arrows until “DEGREES:
FAHRENHEIT” appears in the display.
3. Press “ENTER” to change degree format. Current value
will flash.
4. Use arrow keys to select “CELSIUS.”
5. Press “ENTER” again to set degree format.
6. To exit the Settings menu, press “SETTINGS.”
20
21
Programming Modes
Description
of Tone
Oven Settings
Number
of Tones
Duration
(measured
in seconds)
Information Entry
3
0.1
Cooking Modes
1
1
Meat Probe
Roasting Modes
3
1
Meat Probe
within 10
degrees
Roasting Modes
2
1
Roasting Modes
3
1
Various Cooking
Modes
1
1
Information Entry
2
0.1
Panel is
Locked
Setpoint
Reached
Searing Time
Reached
Start Time
Reached
Panel is
Unlocked
To change the frequency and/or duration of any of the above
tone signals:
1. Press “SETTINGS.” Settings menu will appear in display.
2. Press the up or down arrows until “TONES…” appears in the
display.
3. Press “ENTER,” and “RESTORE FACTORY DEFAULTS: NO”
appears on the display.
4. Scroll up or down using the arrow keys to find the Tone you
would like to change and press “ENTER.” Display will flash
and appear as follows:
Tone Volume
To change the TONE volume setting,
1. Press "SETTINGS." Settings menu will appear on display.
2. Press the up or down arrows until "TONES ..." appears on
the display.
3. Press "ENTER," and "RESTORE FACTORY DEFAULTS:
NO" appears on the display.
4. Press the down arrow until "VOLUME: HIGH" appears on
the display.
5. Press "ENTER" to change volume level. The current value
will flash.
6. Use up and down arrows to select the desired volume
level. Setting options are “HIGH”, “LOW” and “OFF.”
7. Press "ENTER" to confirm volume level setting.
8. To exit the Settings menu, press "SETTINGS.”
Timeouts
Your oven is programmed with 4 preset timeouts that allow the
user varying amounts of time to key in entries to the oven control
display. The amount of time allowed the user to respond to a
programming prompt is called a timeout. If the user fails to make
an entry during the timeout period, the oven will default to its
previous mode.
If you find that the amount of time allowed for programming does
not meet your needs, you can redefine the limits of any of the
four timeouts. The chart below defines the 4 timeouts, their
duration, and when they’re used:
Description
of Timeout
“Short Key Entry: 5 sec”
Duration of
Timeout
Timeout
Name
5. Press “ENTER,” and the “1 x 1 SEC” value will flash.
6. Using the numeric keyboard, enter the number and the
duration of tones desired. The number of tones can be a
value from 0 to 9. The duration of tones is measured in tenths
of a second. You can enter a number from 0.0 to 9.0.
7. Press “ENTER” when finished. The tone is customized to your
preference. At this point the oven plays the new tone. If you
do not like it, return to Step 10 to adjust the tone.
8. To exit the Settings menu, press “SETTINGS.”
22
1
Short Entry
2 Medium Entry
Used in…
Duration
of
Timeout
Cycle setpoint, meat probe
setpoint, and setting the
5 seconds
minute/second timer
Entering cook/stop times,
setting time, selecting
functions and settings
10 seconds
3
Long Entry
Selecting, editing, and
entering Recipes
30 seconds
4
Lock Key
Hold Time
Locking the Oven
3 seconds
23
Programming Modes
Used in…
Description
of Tone
Programming Modes
Oven Settings
Oven Settings
Oven Settings
Sabbath Mode
To change the duration of a Timeout:
1. Press “SETTINGS”. Settings menu will appear in display.
2. Press the up or down arrows until “TIMEOUTS…” appears
in the display.
3. Press “ENTER” and “RESTORE FACTORY DEFAULTS”:
NO” will appear on the display.
4. Scroll up or down using the arrow keys to find the timeout
you would like to change and press “ENTER.” Display will
flash and appear as follows:
Tone Name
Number of
Tones
Duration of Tones
(in seconds)
5. Using the numeric keyboard, enter the number of seconds
desired.
6. Press “ENTER” when finished. Timeout is customized to
your preference.
7. To exit the Settings menu, press “SETTINGS.”
Clock Format
This feature allows users to choose a 12-hour or 24-hour
format for the clock display.
To program the clock format:
1. Press “SETTINGS.” Settings menu will appear in
display.
2. Press up and down arrows until “12 or 24 HOURS: 12”
appears in the display.
3. Press “ENTER” and the current setting will flash in the
display.
4. Use arrow keys to choose “12” or “24.”
5. Press “ENTER” again to accept desired clock format.
6. To exit the Settings menu, press “SETTINGS.”
5. Push “SET” button.
6. Use the up arrow to toggle between “YES” and “NO”.
7. Select “YES” and push “SET” button.
8. To exit the “SETTINGS” menu, press “SETTINGS”.
24
To program the Sabbath mode:
1. Press “SETTINGS”. Settings menu will appear in display.
2. Press up or down arrows until “SABBATH: NO” appears
in the display.
3. Press “ENTER,” and “NO” will flash on display.
4. Use arrow keys to choose “YES” or “NO.”
5. Press “ENTER” again to accept Sabbath mode.
6. To exit the Settings menu, press “SETTINGS.”
Showroom Mode
This mode allows the oven to be hooked up to a 120 volt
electrical supply for display or showroom mode purposes. In this
mode, the electronic display/controls and oven lights will function
but the heating elements and convection fan will NOT function.
To program the Showroom mode:
1.
2
3.
4.
5.
6.
7.
8.
Press “SETTINGS”. Settings menu will appear in display.
Use the down arrow to scroll to “TIMEOUTS”.
At “TIMEOUTS” mode, hold the down arrow for 5 seconds.
Use the down arrow to scroll to “SHOWROOM”.
Push “SET” button.
Use the up arrow to toggle between “YES” and “NO”.
Select “YES” and push “SET” button.
To exit the “SETTINGS” menu, press “SETTINGS”.
25
Programming Modes
Programming Modes
“1 Minute Left: 1 X 1 sec”
This mode offers users belonging to religions with “no work”
restrictions to program their ovens to comply with the Sabbath
requirement. When the oven door is opened in Sabbath mode,
the oven light stays off while the convection fan and heating
elements remain on.
Recipe Function (Premiere Model Only)
Lock and Unlock
Entering Recipe Name
This feature prevents the control pads from being activated while
the ovens are not being used.
This function programs and
saves up to 100 cooking
“Amy’s Oatmeal Cookies”
cycles from favorite recipes.
Recipe names are entered on
the numeric keypad on the
right side of the keyboard.
When a key with several letters is pressed for the first time, the
first letter is entered. If the same key is pressed a second time,
the second letter is entered, and so on. For example, if the key
“2 ABC” is pressed once, the letter ‘A’ is entered. If the key is
pressed 2 times, the letter ‘B’ is entered. If the key is pressed 3
times, the letter ‘C’ is entered. If the key is pressed 4 times, the
digit ‘2’ is entered. Then lower case ‘a’, then ‘b’, then ‘c’, then
‘A’ again, and so on.
Programming Modes
To lock the ovens:
1. Press
on the right side of your oven control
panel. Display shows “HOLD FOR LOCK.”
2. When locked, three short beeps will sound and the display
will show “PANEL IS LOCKED.”
3. To unlock a double oven, press and hold “UPPER OVEN” or
“LOWER OVEN” for 3 seconds. When unlocked, two short
beeps will sound and the display will show “PANEL IS
UNLOCKED.”
4. To unlock a single oven, press and hold the
and simultaneously press and hold the “OVEN ON” button
for 3 seconds. When unlocked, two short beeps will sound
and the display will show “PANEL IS UNLOCKED”.
Interior Oven Lights (Two Pads)
Each oven has an interior light that can be turned off and on
using the designated buttons on the oven control panel.
Press
or
to turn on the light in the upper or lower
oven. (You will hear a beep to signal that the light is on.)
If nothing is pressed within 2 seconds, the cursor moves to the
next position. To return to the previous position use the right
“CLEAR” key. Pressing the ‘1’ key will also move the cursor to
the next position as well as entering a space.
When subsequent characters are entered, the case and type of
the character matches the previous character. For example, if
the previous character is a digit, then pressing the “2 ABC” key
once would result in the digit ‘2’. If the previous character is a
lower case letter, then pressing the “2 ABC” key once would
result in the letter ‘a’.
Press
or
again to turn off the light in the upper or
lower oven. (You will hear two beeps to signal that the light is off.)
26
27
Programming Modes
Oven Settings
Recipe Function (Premiere Model Only)
Warming Modes
Entering a new recipe
Dehydrate
1. Hit “RECIPES” twice.
2. “NAME” should be flashing.
3. Enter a recipe name using numeric keypad.
4. Hit a Bake function key.
5. Use arrow or numeric keypad to set the temperature.
6. If needed, hit “COOK TIME” key to enter cook time.
7. Hit “SET” or “ENTER” to save the recipe.
This oven is designed not only to cook, but also to dehydrate
fruits and vegetables. Here are some tips for using your Viking
oven’s dehydrate feature:
1. In the recipe list mode, hit “RECIPES.”
2. Recipe name should be flashing.
3. Use the following instructions to make changes:
• To change recipe name, use numeric keypad.
• To change cycle, press a Cycle key.
• To change temperature, press an arrow key.
• To change cook time, press the “COOK TIME” key.
4. Hit “SET” or “ENTER” to save the recipe.
Using a recipe
1. To use a programmed recipe, scroll through the list and press
“ENTER” or “SET” to select and start the program.
Deleting a recipe
1. In the recipe list mode, hit “RECIPES.”
2. Recipe name should be flashing.
3. Use right “CLEAR” key to erase the name.
4. Hit “SET” or “ENTER.”
Defrost
This oven can defrost frozen food. To use the defrost function,
take the following steps:
1. Place the frozen food on a baking sheet.
2. Choose and press “UPPER OVEN” or “LOWER OVEN.”
3. Select “DEFROST” from the oven function control panel.
4. Press “SET” or “ENTER” to begin defrosting. The defrost
mode will begin and the defrost temperature will be displayed.
WARNING
To avoid sickness and food waste, do not allow defrosted food
to remain in the oven for more than two hours.
Proof
This function uses a low temperature between 90º and 110º F to
create an optimal environment for the yeast to rise in many types
of dough. To use the proof function, take the following steps:
1. Place the dough on a baking sheet.
2. Choose and press “UPPER OVEN” or “LOWER OVEN.”
3. Select “PROOF” from the oven function control panel.
4. Press “SET” or “ENTER” to begin proofing.
Oven Off
The oven will continue operating until you press the “OFF”
button for the oven you are using. For example, if you are
cooking in the “UPPER OVEN,” press the “OFF” button nearest
this button on the control panel.
28
29
Programming Modes
Programming Modes
Editing a recipe
1. Prepare the food as recommended.
2. Choose and press “UPPER OVEN” or “LOWER OVEN.”
3. Arrange the food on drying racks (not included with the oven,
but available from specialty cooking dealers).
4. Select “DEHYDRATE” from the oven function control panel.
5. Press “SET” or “ENTER.” Dehydrate mode will begin
immediately.
Bake Modes
Bake Modes
Bake
Convection Bake
This function is recommended for single-rack baking. Use this
setting for baking, roasting, and casseroles. To bake, follow these
steps:
This function is recommended for multi-rack baking. Foods can be
baked and roasted at the same time with minimal taste transfer,
even when different dishes are involved, such as cakes, fish, or
meat. To use convection bake, take the following steps:
a. Confirm preset temperature and press “SET” or “ENTER.”
The oven will begin Bake Preheat immediately.
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “CONV. BAKE.”
Temperature display flashes a preset temperature of 325º F.
4. Set the temperature using one of the following two methods:
a. Confirm preset temperature and press “SET” or “ENTER.”
The oven will begin Conv. Bake Preheat immediately.
OR
OR
b. Change the temperature by typing the desired temperature
on the numeric keypad or using the up and down arrow
keys. Press “SET” or “ENTER” when finished. The oven will
begin Bake Preheat immediately.
b. Change the temperature by typing the desired temperature
on the numeric keypad or using the up and down arrow
keys. Press “SET” or “ENTER” when finished. The oven will
begin Conv. Bake Preheat immediately.
During Bake Preheat
The display will alternate between showing the set baking
temperature and the actual preheat temperature every 5 seconds.
When the set baking temperature is reached, one long beep will
sound and the display will show “BAKE.” Open oven door and
put food in oven.
During Convection Bake Preheat
The display will alternate between showing the set baking
temperature and the actual preheat temperature every 5 seconds.
When the set baking temperature is reached, one long beep will
sound and the display will show “CONV. BAKE.” Open oven
door and put food in oven.
To change set temperature during preheat stage:
Press and Release
To change set temperature during preheat stage:
Press and Release
▲
▼
Temperature increases by 5º F (or 2º C)
Temperature decreases by 5º F (or 2º C)
30
▲
Temperature increases by 5º F (or 2º C)
▼
Temperature decreases by 5º F (or 2º C)
31
Programming Modes
Programming Modes
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “BAKE.” Temperature
display flashes a preset temperature of 350º F.
4. Set the temperature using one of the following two methods:
Bake Modes
Broil Modes
TruConvec™
Conventional broiling is most successful for cuts of meat one to
two inches thick, and is also suitable for flat pieces of meat.
This function is ideal for foods that require gentle cooking, singlerack baking, multiple-rack baking, roasting, and preparation of
complete meals. This setting is also recommended when
preparing large quantities of baked goods at one time. To use
TruConvec™, take the following steps:
a. Confirm preset temperature and press “SET” or “ENTER.”
The oven will begin TruConvec™ Preheat immediately.
OR
b. Change the temperature by typing the desired temperature
on the numeric keypad or using the up and down arrow
keys. Press “SET” or “ENTER” when finished. The oven will
begin TruConvec™ Preheat immediately.
With this setting, heat radiates at full power from both broil
elements, located in the top of the oven cavity. The distance
between the foods and the broil elements determines broiling
speed. For fast broiling, place food as close as two inches from
the broil element, or on the top rack. Fast broiling is best for
meats where "rare to medium" doneness is desired. Use this
setting for broiling small and average cuts of meat.
Medium Broil
With this setting, inner and outer broil elements pulse on and off
to produce less heat for slow broiling. For slow broiling, allow
about four inches between the top surface of your food and the
broil element. Slow broiling is best for chicken and ham. Use this
setting for broiling small and average cuts of meat.
Low Broil
This mode uses only a fraction of the oven’s available power to
the inner broil element to produce delicate top-browning in only
three to four minutes on items such as meringue.
To Use Broil:
During TruConvec™ Preheat
The display will alternate between showing the set baking
temperature and the actual preheat temperature every 5 seconds.
When the set baking temperature is reached, one long beep will
sound and the display will show “TRUCONVEC.” Open oven
door and put food in oven.
To change set temperature during preheat stage:
Press and Release
▲
Temperature increases by 5º F (or 2º C)
▼
Temperature decreases by 5º F (or 2º C)
32
1. Arrange the oven rack in the desired position before
turning the broiler on.
2. Place the food in the center of the cold broiler pan and grid
supplied with your oven, and then place the broiler pan in the
oven.
3. Select “UPPER OVEN” or “LOWER OVEN.”
4. Set the Oven Function Selector to “BROIL.” Display will show
“BROIL HIGH” and “ON” will flash. Medium and low displays
will show “CONV BROIL M” and “CONV BROIL L.”
5. Choose power level for BROIL:
a. For “HIGH BROIL,” press “SET.”
b. For “MEDIUM BROIL,” press down arrow key once. Display
will change to MED, then press “SET.”
c. For “LOW BROIL,” press down arrow key twice. Display will
change to LO, then press “SET.”
6. Close the door to the oven. With closed-door broiling, the broil
element might cycle on and off if an extended broiling time is
required. A built-in smoke "eliminator" in the top of the oven
will help reduce smoke and odors.
7. When cooking is complete, press the “OFF” button for the
selected oven.
33
Programming Modes
Programming Modes
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “TRUCONVEC.”
Temperature display flashes a preset temperature of 325º F.
4. Set the temperature using one of the following two methods:
High Broil
Broil Modes (cont.)
Roast Modes
Convection Broil
Convection Roast
Convection broiling has the advantage of broiling food slightly
more quickly than conventional. Convection broiling of meats also
produces better results, especially for thick cuts. This is because
meat sears on the outside and retains more juices and natural
flavor inside with less shrinkage.
Use this function when roasting tender cuts of meat or poultry of
any size. To use Convection Roast, follow these steps:
1. Arrange the oven rack in the desired position before turning
the broiler on.
2. Place the food in the center of the cold broiler pan and grid
supplied with your oven, and then place the broiler pan in the
oven.
3. Select “UPPER OVEN” or “LOWER OVEN.”
4. Set the Oven Function Selector to “CONV. BROIL.” Display will
show “CONV BROIL H” and “ON” will flash. Medium and low
displays will show “CONV BROIL M” and “CONV BROIL L.”
5. Choose power level for CONVECTION BROIL:
a. For “HIGH CONVECTION BROIL,” press “SET.”
b. For “MEDIUM CONVECTION BROIL,” press down arrow
key once. Display will change to MED, then press “SET.”
c. For “LOW CONVECTION BROIL,” press down arrow key
twice.
d. Display will change to LO, then press “SET.”
6. Close the door to the oven. With closed-door broiling, the broil
element might cycle on and off if an extended broiling time is
required. A built-in smoke "eliminator" in the top of the oven
will help reduce smoke and odors.
7. When cooking is complete, press the “OFF” button for the
selected oven.
a. Confirm preset temperature and press “SET” or “ENTER.”
The oven will begin Convection Roast Preheat immediately.
OR
b. Change the temperature by typing the desired temperature
on the numeric keypad or using the up and down arrow
keys. Press “SET” or “ENTER” when finished. The oven will
begin Convection Roast Preheat immediately.
During Convection Roast Preheat
The display will alternate between showing the set temperature
and the actual preheat temperature every 5 seconds. When the
set temperature is reached, one long beep will sound and the
display will show “CONV. ROAST.” Open oven door and put
food in oven.
To change set temperature during preheat stage:
Press and Release
Oven Off
The oven will continue operating until you press the “OFF”
button for the oven you are using. For example, if you are
cooking in the “UPPER OVEN,” press the “OFF” button
nearest this button on the control panel.
34
▲
Temperature increases by 5º F (or 2º C)
▼
Temperature decreases by 5º F (or 2º C)
35
Programming Modes
Programming Modes
To Use Convection Broil:
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “CONV. ROAST.”
Temperature display flashes a preset temperature of 325º F.
4. Set the temperature using one of the following two methods:
Roast Modes
Meat Probe (Available on Premiere Models)
Auto Roast
The meat probe takes the guesswork out
of roasting by cooking foods to the ideal
internal temperature. The probe setting is
used to automatically turn the oven off
when meat reaches its optimal internal
temperature. Your Viking oven’s built-in
probe will help you prepare meats exactly
as you want them.
Use this function to simplify roasting by automatically searing the
outside of roasts. To use Auto Roast:
a. Confirm preset temperature, press “SET” or
“ENTER.” The oven will begin TruConvec™ Preheat
immediately.
OR
b. Change the temperature by typing the desired
temperature on the numeric keypad or using the up
and down arrow keys. Press “SET” or “ENTER” when
finished. The oven will begin TruConvec™ Preheat
immediately.
During Auto Roast Preheat
Probe
Handles
Plug
Meat Probe Use and Care
• Use of probes other than the one provided with your oven
may result in damage to the probe.
• Use the handles of the probe and plug when inserting and
removing them from the meat and outlet.
• To avoid damaging your probe, never use tongs to pull on the
cable when removing.
• To avoid breaking the probe, make sure food is completely
defrosted before inserting.
• To prevent possible burns, do not unplug the probe from the
outlet until the oven has cooled.
• Never leave the probe inside the oven during a self-cleaning
cycle.
• Never store the probe inside the oven.
The display will alternate between showing the set roasting
temperature and the actual preheat temperature every 5 seconds.
To Insert the Meat Probe:
When Set Auto Roast Temperature Is Reached
After preparing the meat and placing it on the broiler pan, follow
these steps for proper probe placement:
One long beep will sound and the display will show “SEARING.”
The oven will remain at searing temperature (set temperature plus
100º F) for 30 minutes. If set, the Cook Time timer will begin.
To Turn Off Oven:
Press the “OFF” button on the control panel display for the oven
you are using. One beep will sound and the oven will turn off.
1. Lay the probe on the outside of the meat along the top or
side and use your finger to mark where the edge of the meat
meets the probe. The point where they meet should rest in
the center of the thickest, meatiest part of the roast.
2. Insert the probe completely into the meat. It should not touch
the bone, fat, or gristle.
• For roasts with no bone, insert the probe into the meatiest
part of the roast.
• For bone-in ham or lamb, insert the probe into the center
of the lowest large muscle or joint.
• With a whole turkey, insert the probe into the meatiest part
of the inner thigh from below and parallel to the leg.
36
37
Programming Modes
Programming Modes
1. Arrange the oven racks in the desired positions before heating
the oven.
2. Select “UPPER OVEN” or “LOWER OVEN.”
3. Set the Oven Function Selector to “AUTO ROAST.”
Temperature display flashes a preset temperature of 325º F.
4. Set the temperature using one of the following two methods:
Cable
Programming Modes
Meat Probe (Available on Premiere Models)
Cooking Tips
To Set the Meat Probe Function:
Rack Positions
• A cooking mode must be selected before setting meat probe.
• Bake, Convection Bake, Convection Roast, TruConvec™, and
Convection Broil are the cooking modes that can be used with
the meat probe function.
• Set the internal temperature about 10° F lower than the
actual desired internal temperature. The meat will continue to
cook when removed from the oven and will reach desired
internal temperature while “standing.”
Each oven is equipped with tilt-proof racks and at least one
TruGlide rack. (See chart below for number of TruGlide racks
found in each oven.) With the TruGlide rack, the bottom section
remains in the oven and the top section smoothly glides outward
when pulled. This reduces the chances of spills and makes
removing heavy items from the oven much easier. Below is a list
of how many TruGlide racks are found in each oven. Please note
that the TruGlide rack can be used in any of the six rack positions.
• Select Single and Double Ovens – One TruGlide rack (upper
oven only in double ovens)
• Premiere Single Ovens – Two TruGlide racks
• Premiere Double Ovens – Three TruGlide racks (two in upper
oven and one in lower oven)
Position 6
Position 5
Position 4
Position 3
Position 2
Position 1
All ovens have six rack positions. Position 6 is the farthest from the
oven bottom. Position 1 is the closest to the oven bottom. The
racks can be easily removed and arranged at various levels. For
best results with conventional baking, do not use more than one
rack at a time. It is also recommended, when using two racks, to
bake with the racks in positions 2 and 4 or positions 3 and 5.
1. Arrange the oven racks in the desired positions BEFORE
heating the oven. If cooking on two racks at the same time,
use rack positions 2 and 4 or positions 3 and 5.
2. Turn the Oven Function selector to desired function. Cooking
starts immediately and stops when the Oven Function selector
is turned to OFF.
3. Set the Temperature Control to the desired temperature.
4. Place food in the oven after the Oven indicator light goes out.
38
39
Cooking Tips
1. Insert probe into the meat and slide into oven after the oven
has reached the set preheat temperature. Double oven
models have a meat probe in the upper oven only.
2. Plug the probe into the outlet located on the left interior wall of
the oven and close the oven door.
3. Press the “MEAT PROBE” button on the control panel. The
display will show “SET PROBE” and flashing preset
temperature.
4. The preset temperature of 160º F or a stored temperature will
be displayed on the electronic timing center. If you desire this
temperature, the probe mode will begin after 10 seconds.
5. To set another temperature, use the keypad to enter the
desired temperature and press “SET” or “ENTER.”
• The temperature must be within the range of 120º to 190º F.
• Display alternates between cook mode and probe
temperature.
• Probe temperature displays LO until 100º F is reached, then
displays actual temperature.
6. When the probe is within 10º F of setpoint, two long beeps will
sound. When the setpoint is reached, three long beeps will
sound and the oven will turn off. The display will alternate
between cook mode and “DONE.” One short beep will sound
every minute until the probe function is closed.
7. Press any key to close the probe function.
Preheat
Preheat
Preheat
For best results, it is extremely important that you preheat
your oven to the desired cooking temperature before placing
food items in the oven to begin cooking. In many cooking
modes, partial power from the broiler is used to bring the
oven to the preheat temperature. Therefore, placing food
items in the oven during preheat mode is not recommended.
The Viking Rapid Ready™ Preheat System is engineered so
that the oven is brought to the desired set temperature in a
manner which will provide the optimum cooking environment
based on the selected cooking mode in the shortest possible
time.
Note: While preheating, display will alternate between
PREHEAT and FUNCTION and TEMPERATURE selected.
Note: PREHEAT is the only cycle where actual temperature is
displayed, otherwise the display shows set temperature.
Note: Certain functions include a PREHEAT cycle. Once set
temperature has been reached, the oven will automatically
exit PREHEAT and follow NORMAL OPERATION mode.
Cooking Tips
Cooking Tips
For instance, the preheat mode for TruConvec™ is designed
to be brought up to the set point temperature in a different
manner than the preheat mode for CONVENTIONAL BAKE.
This is because TRUCONVEC is designed for multi-rack
baking. So it is extremely critical that all rack positions have
reached the desired cooking temperature. As a result, it is
normal for oven to take slightly longer for the oven to preheat
to 350°F (180ºC) in TRUCONVEC mode when compared to
the amount of time it takes to preheat to 350°F (180ºC) in
CONVENTIONAL BAKE mode.
Also, preheat time can vary based on some external factors
such as room temperature and power supply. A significantly
colder room temperature or a power supply less than 240
VAC can lengthen the time it takes for the oven to reach the
desired set temperature.
40
41
Cooking Tips
Pan Placement Tips
• Some recipes may require adjustment and testing when
converting from standard to convection modes. If unsure how to
convert a recipe, begin by preparing the recipe in Conventional
Bake. After achieving acceptable results, follow the convection
guidelines listed for the similar food type. If the food is not
prepared to your satisfaction during this first convection trial,
adjust only one recipe variable at a time (cooking time, rack
position, or temperature) and repeat the convection test.
Continue adjusting one recipe variable at a time until you
achieve the results you are looking for.
• Make sure the oven racks are in the desired position before you
turn on the oven.
• Do not open the door frequently during baking. Look through
the door window to check doneness whenever possible. If you
must open the door, the best time is during the last quarter of
the baking time.
• Bake to the shortest time suggested and check for doneness
before adding more time. For baked goods, a stainless steel
knife placed in the center of the product should come out clean
when the baked item is done.
• Use the pan size and type recommended by the recipe to
ensure best results. Cakes, quick breads, muffins, and cookies
should be baked in shiny, reflective pans for light, golden crusts.
Avoid the use of old, darkened pans. Warped, dented, stainless
steel and tin-coated pans heat unevenly and will not give
uniform baking results.
• When using large (15" x 13") flat pans or trays that cover
most of the rack, rack positions 2 or 3 produce the best
results.
• When baking on more than one rack, we recommend using
one of the convection modes and the 2nd and 4th position
or the 3rd and 5th position for more even baking. When
baking on three racks, use any combination of positions 2, 3,
4, and 5 for more consistent results.
• Stagger pans in opposite directions when two racks and
several pans are used in Conventional Bake Mode. If possible,
no pan should be directly above another.
• Allow 1 to 2 inches of air space around all sides of each pan
for even air circulation.
Cooking Tips
Single Rack Pan Placement
Multiple Rack Pan Placement
Multiple Rack Baking
Baking Tips
Because of variations in food density, surface texture, and
consistency, some foods may be prepared more successfully using
the Conventional Bake setting. For this reason, conventional
baking is recommended when preparing baked goods, such as
custard. You may find that other foods also turn out best when
cooked in Conventional Bake Mode.
• As a general rule, to convert conventional recipes to convection
recipes, reduce the temperature by 25° F (-3.9° C) and the
cooking time by approximately 10 to 15%.
42
One major benefit of convection cooking is the ability to prepare
foods in larger quantities. The uniform air circulation makes this
possible. Foods that can be prepared on two or three racks at the
same time include: pizza, cakes, cookies, biscuits, muffins, rolls,
and frozen convenience foods.
For three-rack baking, use any combination of rack positions two,
three, four, and five. For two-rack baking, use rack positions two
and four or positions three and five. Remember that the racks are
numbered from bottom to top.
43
Cooking Tips
Cooking Tips
Conventional Baking Chart
Biscuits
Yeast Loaf
Yeast Rolls
Nut Bread
Cornbread
Gingerbread
Muffins
Corn Muffins
CAKES
Angel food
Bundt
Cupcakes
Layer, Sheet
Layer, Two
Pound
COOKIES
Brownies
Choc. Chip
Sugar
PASTRY
Cream Puffs
PIES
Crust, Unfilled
Crust, Filled
Lemon Meringue
Pumpkin
Custard
ENTREES
Egg Rolls
Fish Sticks
Lasagna, frz
Pot Pie
Gr. Peppers Stuffed
Quiche
Pizza, 12"
Mac. & Cheese, frz
VEGETABLES
Baked Potatoes
Spinach Souffle
Squash
French Fries
Time
Single Rack
Position
Temp
(minutes)
Food
BREADS
Pan Size
Cookie Sheet
Loaf Pan
Cookie Sheet
Loaf Pan
8" x 8"
8" x 8"
Muffin Tin
Muffin Tin
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
400° F (204.4° C)
375° F (190.6° C)
400° F (204.4° C)
375° F (190.6° C)
400° F (204.4° C)
350° F (176.7° C)
375° F (190.6° C)
375° F (190.6° C)
8 - 10
30 - 35
12 - 15
30 - 35
20 - 25
35 - 40
15 - 20
15 - 20
Cookie Sheet
Loaf Pan
Cookie Sheet
Loaf Pan
8" x 8"
8" x 8"
Muffin Tin
Muffin Tin
2&4
2&4
2&4
2&4
2&4
2&4
2&4
2&4
375° F (190.6 C)
350° F (176.7° C)
375° F (190.6° C)
350° F (176.7° C)
375° F (190.6° C)
325° F (162.8° C)
350° F (176.7° C)
350° F (176.7° C)
7-9
20 - 25
11 - 13
20 - 25
15 - 20
30 - 35
12 - 15
0 - 12
Tube pan
Tube pan
Muffin pan
13" x 9"
9" round
Loaf pan
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
375° F (190.6° C)
350° F (176.7° C)
350° F (176.7° C)
350° F (176.7° C)
350° F (176.7° C)
350° F (176.7° C)
35 - 45
45 - 55
16 - 20
40 - 50
30 - 35
60 - 65
Tube pan
Tube pan
Muffin pan
13" x 9"
9" round
Loaf pan
3 or 4
3 or 4
2&4
2&4
2&4
2&4
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
30 - 35
35 - 40
15 - 17
30 - 32
25 - 30
5 - 50
13" x 9"
Cookie Sheet
Cookie Sheet
3 or 4
3 or 4
3 or 4
350° F (176.7° C) 25 - 30
375° F (190.6° C) 12 - 15
350° F (176.7° C) 10 - 12
13" x 9"
Cookie Sheet
Cookie Sheet
2&4
2,3,& 4
2,3,& 4
325° F (162.8° C) 20 -25
350° F (176.7° C) 7 -10
325° F (162.8° C) 9-10
Cookie Sheet
3 or 4
400° F (204.4° C) 30 - 35
Cookie Sheet
2&4
375° F (190.6° C)
9" Round
9" Round
9" Round
9" Round
6 - 4 oz cups
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
425° F (218.3° C)
375° F (190.6° C)
350° F (176.7° C)
350° F (176.7° C)
350° F (176.7° C)
10 - 12
55 - 60
12 - 15
40 - 45
35 - 40
9" Round
9" Round
9" Round
9" Round
6 - 4oz cups
2&4
2&4
2&4
2&4
2&4
400° F (204.4° C) 7 - 9
350° F (176.7° C) 50 - 55
325° F (162.8° C) 4 - 5
325° F (162.8° C) 35 - 45
325° F (162.8° C) 30 - 35
Cookie Sheet
Cookie Sheet
Cookie Sheet
Cookie Sheet
13" x 9"
9" Round
Cookie Sheet
Cookie Sheet
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
400° F (204.4° C)
425° F (218.3° C)
375° F (190.6° C)
400° F (204.4° C)
375° F (190.6° C)
400° F (204.4° C)
400° F (204.4° C)
375° F (190.6° C)
12 - 15
18 - 21
65 - 70
35 - 40
65 - 70
25 - 30
15 - 20
60 - 65
Biscuits
Yeast Loaf
Yeast Rolls
Nut Bread
Cornbread
Gingerbread
Muffins
Corn Muffins
CAKES
Angel food
Bundt
Cupcakes
Layer, Sheet
Layer, Two
Pound
COOKIES
Brownies
Choc. Chip
Sugar
PASTRY
Cream Puffs
PIES
Crust, Unfilled
Crust, Filled
Lemon Meringue
Pumpkin
Custard
ENTREES
Egg Rolls
Fish Sticks
Lasagna, frz
Pot Pie
Gr. Peppers Stuffed
Quiche
Pizza, 12"
Cookie Sheet
Cookie Sheet
Cookie Sheet
Cookie Sheet
13" x 9"
9" Round
Cookie Sheet
2&4
2&4
2&4
2&4
2&4
2&4
2&4
375° F (190.6° C)
400° F (204.4° C)
350° F (176.7° C)
375° F (190.6° C)
350° F (176.7° C)
375° F (190.6° C)
375° F (190.6° C)
Cookie Sheet
3 or 4
350° F (176.7° C) 45 - 50
On Rack
1 qt. Casserole
Cookie Sheet
Cookie Sheet
3 or 4
3 or 4
3 or 4
3 or 4
375° F (190.6° C)
350° F (176.7° C)
375° F (190.6° C)
425° F (218.3° C)
60 - 65
45 - 50
50 - 55
15 - 20
On Rack
1 qt.Casserole
Cookie Sheet
Cookie Sheet
3 or 4
3 or 4
3 or 4
3 or 4
350° F (176.7° C)
325° F (162.8° C)
350° F (176.7° C)
400° F (204.4° C)
44
Time
Single Rack
Position
Pan Size
Mac. & Cheese, frz
VEGETABLES
Baked Potatoes
Spinach Souffle
Squash
French Fries
45
Temp
(minutes)
4 - 27
8 - 10
13 -16
60 - 65
10 - 12
45 - 50
20 - 25
10 - 12
45 - 50
35 - 40
40 - 45
10 - 15
Cooking Tips
Cooking Tips
Food
BREADS
Convection Baking Chart
Broiling Tips
Baking problems can occur for many reasons. It is important to remember
that the temperature setting and cooking times you are accustomed to
using with your previous oven may vary slightly from those required with
your new Viking oven. You may find that you need to make some
adjustments.
• Always use a broiler pan and grid for broiling. They are
designed to provide drainage of excess liquid and fat away
from the cooking surface to help prevent splatter, smoke, and
fire.
• To keep meat from curling, slit fatty edges.
• Brush chicken and fish with butter several times as they broil to
prevent drying out.
• To prevent sticking, lightly grease broiler tray.
• Broil on first side for slightly more than half the recommended
time, season, and then turn. Season the second side just before
removing from the oven.
• Always pull the rack out to “STOP” position before turning or
removing food.
• Use tongs or a spatula to turn meats. Never pierce meat with a
fork, as this allows the juices to escape.
• Remove the broiler pan from the oven when you remove the
food. Otherwise, drippings will bake onto the pan.
• While the pan is hot, place a damp paper towel over the
grid. Drizzle with liquid dishwashing detergent and pour
water over the grid. This will make cleaning easier.
• You can also line the broiler pan with aluminum foil to
make cleaning easier. Be sure the foil extends up the
side of the pan.
• Although it isn’t recommended, the grid can also be covered
with foil. Be sure to slit openings to conform with the openings
in the grid so that melted fat can drain through. This will prevent
spattering, smoking, or the possibility of grease fire.
Cooking Tips
COMMON BAKING PROBLEMS AND REMEDIES
PROBLEM
CAUSE
REMEDY
Cakes burned on the
sides or not done
in center
1. Oven was too hot
2. Wrong pan size
3. Too many pans
1. Reduce temperature
2. Use recommended pan size
3. Reduce number of pans
Cakes crack on top
1. Batter too thick
2. Oven too hot
3. Wrong pan size
1. Follow recipe; Add liquid
2. Reduce temperature
3. Use recom. pan size
Cakes are not level
1. Batter uneven
1. Distribute batter evenly
2. Oven or rack not level 2. Level oven or rack
3. Pan was warped
3. Use proper pan
Food too brown on
bottom
1. Oven door opened
too often
2. Dark pans being used
3. Incorrect rack position
4. Wrong bake setting
Food too brown on
top
Cookies too flat
5. Pan too large
1. Use door window to
check food
2. Use shiny pans
3. Use recom. rack position
4. Adjust to conventional
or convection setting
as needed
5. Use proper pan
1.
2.
3.
1.
1.
2.
3.
1.
Rack position too high
Oven not preheated
Sides of pan too high
Hot cookie sheet
Use recom. rack position
Allow oven to preheat
Use proper pans
Allow sheet to cool
between batches
Pies burned around
edges
1. Oven too hot
2. Too many pans used
3. Oven not preheated
1. Reduce temperature
2. Reduce no. of pans
3. Allow oven to preheat
Pies too light on top
1. Oven not hot enough
2. Too many pans used
3. Oven not preheated
1. Increase temperature
2. Reduce no. of pans
3. Allow oven to preheat
46
47
Cooking Tips
Solving Baking Problems
Broiling Chart
Weight
Sirloin, 1"
Rare
12 oz
Medium
12 oz
Well done
12 oz
T-Bone, 3/4"
Rare
10 oz
Medium
10 oz
Well done
10 oz
Hamburger, 1/2"
Rare
1/4 lb.
Medium
1/4 lb.
Well done
1/4 lb.
CHICKEN
Bnls Breast
1 lb.
Bone-in Breast
2 - 2 1/2 lb.
Chicken pieces
2 -2 1/2 lb.
HAM
Ham slice, 1"
1 lb.
LAMB
Rib Chops, 1"
12 oz.
Shoulder
1 lb.
PORK
Loin Chops, 3/4"
1 lb.
Bacon
FISH
Salmon Steak
1 lb.
Fillets
1 lb.
Setting
Rack
Time
(minutes)
Conventional Broil
Conventional Broil
Conventional Broil
5
5
5
7
9
11
Conventional Broil
Conventional Broil
Conventional Broil
5
5
5
5
7
9
Convection Broil
Convection Broil
Convection Broil
5
5
5
4
7
9
Convection Broil
Conventional Broil
Convection Broil
4
4
4
18
20
18 (min/lb)
Conventional Broil
4
22
Convection Broil
Convection Broil
5
5
7
6
Convection Broil
Conventional Broil
4
4
14
6
Convection Broil
Convection Broil
5
5
7
6
48
• Always use the broiler pan and grid supplied with each oven,
because the hot air must be allowed to circulate around the
item being roasted.
• Do not cover what is being roasted; convection roasting seals in
juices quickly for a moist, tender product. Poultry will have a
light, crispy skin and meats will be browned, not dry or burned.
• Cook meats and poultry directly from the refrigerator. There is
no need for meat or poultry to stand at room temperature.
• As a general rule, to convert conventional recipes to convection
recipes, reduce the temperature by 25° F (-3.9° C) and the
cooking time by approximately 10 to 15%.
• Always roast meats fat side up in a shallow pan, using a roasting
rack. No basting is required when the fat side is up.
• Do not add water to the pan, as this will cause a steamed
effect. Roasting is a dry-heat process.
• Poultry should be placed breast side up on a rack in a shallow
pan. Brush poultry with melted butter, margarine, or oil before
and during roasting.
• For convection roasting, do not use pans with tall sides, as this
will interfere with the circulation of heated air over the food.
• When using a meat thermometer, insert the probe halfway into
the center of the thickest portion of the meat. (For poultry,
insert the thermometer probe between the body and leg into
the thickest part of the inner thigh.) To ensure an accurate
reading, the tip of the probe should not touch bone, fat, or
gristle.
• Check the meat temperature halfway through the recommended
roasting time.
• After reading the thermometer once, insert it 1¼ to 2 inches
(1.3 cm) further into the meat, then take a second reading. If
the second temperature registers below the first, continue
cooking the meat.
• Roasting times always vary according to the size, shape, and
quality of meats and poultry. Less tender cuts of meat are best
prepared in the conventional bake setting and may require
moist cooking techniques.
• Remove roasted meats from the oven when the thermometer
registers 5° F (-15° C) to 10° F (-12.2°C) lower than the desired
doneness. This is because the meat will continue to cook after
removal from the oven.
• Allow roasts to stand 15 to 20 minutes after taking them out of
the oven to make carving easier.
• If using a cooking bag, foil tent, or other cover, use the
conventional bake setting rather than either convection setting.
49
Cooking Tips
Cooking Tips
Type and
Cut of Meat
TeBEEF
Roasting Tips
Conventional Roasting Chart
BEEF
Rib Roast
Rare
Medium
Well done
Rump Roast
Medium
Well done
Tip Roast
Medium
Well done
LAMB
Lamb Leg
PORK
Pork Loin
Pork Chops
1" thick
Ham, fully
Cooked
POULTRY
Chicken, Whole
Turkey,
Unstuffed
Turkey
Turkey, Stuffed
Turkey, Stuffed
Turkey Breast
Weight
Temp
Time
(min/lb)
Internal
Temp
4 - 6 lbs
4 - 6 lbs
4 - 6 lbs
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
25
30
40
140° F (60.0° C)
155° F (68.3° C)
170° F (76.7° C)
4 - 6 lbs
4 - 6 lbs
325° F (162.8° C)
325° F (162.8° C)
25
30
155° F (68.3° C)
170° F (76.7° C)
3 - 4 lbs
3 - 4 lbs
325° F (162.8° C)
325° F (162.8° C)
35
40
155° F (68.3° C)
170° F (76.7° C)
3 - 5 lbs
325° F (162.8° C)
30
180° F (82.2° C)
3 - 5 lbs 325° F (162.8° C)
1 -1 1/4 lbs 350° F (176.7° C)
5 lbs
325° F (162.8° C)
35
180° F (82.2° C)
55 - 60
N/A
total time
18
130° F (54.4° C)
3 - 4 lbs 375° F (190.6° C)
12 - 16 lbs 325° F (162.8° C)
30
16 - 20
180° F (82.2° C)
180° F (82.2° C)
20 - 24 lbs
12 - 16 lbs
20 - 24 lbs
4 - 6 lbs
16 - 20
17 - 21
17 - 21
20
180° F (82.2° C)
180° F (82.2° C)
180° F (82.2° C)
180° F (82.2° C)
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
325° F (162.8° C)
50
Food
Weight
Temp
BEEF
Rib Roast
Rare
4 - 6 lbs 325° F (162.8° C)
Medium
4 - 6 lbs 325° F (162.8° C)
Well done
4 - 6 lbs 325° F (162.8° C)
Rump Roast
Medium
4 - 6 lbs 325° F (162.8° C)
Well done
4 - 6 lbs 325° F (162.8° C)
Tip Roast
Medium
3 - 4 lbs 325° F (162.8° C)
Well done
3 - 4 lbs 325° F (162.8° C)
LAMB
Lamb Leg
3 - 5 lbs 325° F (162.8° C)
PORK
Pork Loin
3 - 5 lbs 325° F (162.8° C)
Pork Chops
1 -1 1/4 lbs 325° F (162.8° C)
1" thick
Ham, fully
5 lbs
325° F (162.8° C)
Cooked
POULTRY
Chicken, Whole 3-4 lbs
350° F (176.7° C)
Turkey,
12 - 16 lbs 325° F (162.8° C)
Unstuffed
Turkey
20 - 24 lbs 325° F (162.8° C)
Turkey, Stuffed
12 - 16 lbs 325° F (162.8° C)
Turkey, Stuffed
20 - 24 lbs 325° F (162.8° C)
Turkey Breast
4 - 6 lbs
325° F (162.8° C)
51
Time
(min/lb)
Internal
Temp
25
24
30
140° F (60.0° C)
155° F (68.3° C)
170° F (76.7° C)
20
24
155° F (68.3° C)
170° F (76.7° C)
30
35
155° F (68.3° C)
170° F (76.7° C)
30
180° F (82.2° C)
30
180° F (82.2° C)
45 - 50
N/A
total time
15
130° F (54.4° C)
25
11
180° F (82.2° C)
180° F (82.2° C)
11
9 - 10
9 - 10
20
180° F (82.2° C)
180° F (82.2° C)
180° F (82.2° C)
180° F (82.2° C)
Cooking Tips
Cooking Tips
Food
Convection Roasting Chart
Cleaning and Maintenance
Any piece of equipment works better and lasts longer when
maintained properly and kept clean. Cooking equipment is no
exception. Your new Viking oven must be kept clean and
maintained properly in order to give you the years of cooking
enjoyment for which it is designed.
Cleaning and Maintenance
Surface or
Feature
Cleaning Recommendation
Meat Probe • Cool the probe before cleaning.
• The meat probe may be cleaned with soap
and water or with a soap-filled scouring pad.
• Scour stubborn spots with the soap-filled
scouring pad. Rinse and dry.
• Do not immerse the meat probe in water.
• Do not store the probe inside the oven.
Several different finishes have been used in your electric oven.
Cleaning instructions for each surface are given below. (Your oven
features a Self-Clean cycle for the oven interior. See page 54 for
complete interior cleaning instructions.)
General Cleaning
NOTE: NEVER USE AMMONIA, STEEL WOOL PADS OR
ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR
ABRASIVE POWDERS ON ANY PART OF YOUR VIKING OVEN.
THEY CAN CAUSE PERMANENT DAMAGE.
Surface or
Feature
Brass Parts
Cleaning Recommendation
• Clean the broiler pan and grid with detergent
and hot water. For stubborn spots, use a
soap-filled, steel wool pad.
• Clean the oven racks with detergent and hot
water. Stubborn spots can be scoured with a
soap-filled, steel wool pad.
Broiler Pan • Clean the broiler pan and grid with detergent
and hot water.
and Grid
• Scour stubborn spots with a soap-filled, steel
wool pad.
Oven Control • The panel and its individual TouchSensor™
panels should be cleaned regularly.
Panel
• Wipe clean with a soft cloth and any glass
cleaner or mild detergent.
Stainless
Steel Parts
• All stainless steel body parts should be wiped
regularly with hot, soapy water at the end of
each cooling period, and with a liquid cleaner
designed for steel when soapy water will not
do the job.
• Do not use steel wool, abrasive cloths,
cleansers, or powders.
• If necessary, soak the area with hot towels to
loosen encrusted material, then use a wooden
or nylon spatula or scraper. Do not use a
metal knife, spatula, or any other metal tool to
scrape stainless steel.
• Do not permit citrus or tomato juice to remain
on any stainless steel surface, because citric
acid will permanently discolor stainless steel.
Wipe up any spills.
CAUTION
Product Care
52
53
Product Care
All special ordered brass parts are coated with an epoxy coating.
DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON
ANY BRASS PARTS. All brass body parts should be wiped
regularly with hot soapy water. When hot soapy water will not
do the job, use every day household cleaners that are not
abrasive.
Cleaning and Maintenance
Cleaning and Maintenance
Cleaning the Interior Oven
Using the Self-Clean Cycle
Your Viking oven features an automatic, self-cleaning cycle.
During this cycle, the oven reaches elevated temperatures in
order to burn off soil and deposits. An integral smoke eliminator
helps reduce odors associated with the soil burn-off. A powder
ash residue is left in the bottom of the oven after completion of
the Self-Clean Cycle.
The door latch is automatically activated after selecting the SelfClean setting. The latch ensures that the door cannot be opened
while the oven interior is at clean temperatures.
Before Using the Self-Clean Cycle:
• Remove the oven racks and any other items/utensils from
the oven. The high heat generated during the cleaning cycle
can discolor, warp, and damage these items.
• Do not use foil or liners in the oven during the Self-Clean
Cycle.
• Wipe off any large spills from the oven bottom and sides.
• Never use oven cleaners inside a self-cleaning oven or on
raised portions of the oven door.
• Some areas of the oven must be cleaned by hand before the
cycle begins. Soils in these areas will be baked on and very
difficult to clean if not removed first.
• Clean the door up to the gasket, the door frame, and up to
two inches inside the frame with detergent and hot water.
Rinse thoroughly and dry.
• Clean only the parts listed in this manual.
WARNING
CAUTION
Do not touch the exterior portions of the oven after self-cleaning
cycle has begun, since some parts become extremely hot to the
touch! During the first few times the self-cleaning feature is used,
there may be some odor and smoking from the curing of the
binder in the high-density insulation used in the oven. When the
insulation is thoroughly cured, this odor will disappear. During
subsequent self-cleaning cycles, you may sense an odor
characteristic of high temperatures. Keep the kitchen wellvented during the self-cleaning cycle.
Product Care
Product Care
Burn or Electrical Shock Hazard
Make sure all controls are OFF and oven is COOL before
cleaning. Failure to do so can result in burns or electrical shock.
1. Close the door completely.
2. Select “UPPER OVEN” or “LOWER OVEN.” “SELECT
MODE” will appear in the display for the selected oven.
3. Press “SELF CLEAN” from the oven function control panel.
4. Press “SET” or “ENTER.” At this time, “SELF CLEAN” will
appear in the display. The door lock indicator light will
remain on until the Self-Clean is completed or interrupted
and the oven temperature drops to a safe temperature.
A complete cycle takes approximately 3 1/2 hours, with an
additional 30 minutes needed for the oven to cool down
enough for the door latch to disengage.
NOTE: A whirring fan noise will be heard during the SelfClean Cycle and will continue to run for the 3 1/2 hour
duration of the Self-Clean Cycle.
5. The timer will count down from 4 hours. When the cycle is
completed, press the “OFF” button for the selected oven.
6. When the oven has completely cooled, open the door and
remove any ash from the oven surfaces with a damp cloth.
7. To cancel or interrupt the self-cleaning cycle, press the
“OFF” button for the selected oven.
54
55
Replacing Light
Trouble Shooting
Replacing Interior Halogen Oven Lights
CAUTION
DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BEFORE REPLACING BULB.
Do not touch bulb with bare hands. Clean off any signs of oil
from the bulb and handle with a soft cloth.
glass light
cover
1. Unsnap glass light cover
using a screwdriver in the
access groove.
POSSIBLE CAUSE AND/OR REMEDY
1. Oven will not function.
Oven is not connected to electrical power.
Have electrician check power circuit breaker,
wiring and fuses.
2. Oven does not
operate in self-clean mode.
Door is not shut tight enough for
automatic door latch to lock.
3. Door will not open.
Oven is still in Self-Clean Mode. If oven is
hot, door latch will release when a safe
temperature is reached.
4. Oven light will not work.
Light bulb is burned out.
Oven is not connected to power.
Error Handling
access
groove
In the event that you make an error while programming your Viking oven,
you will hear a long beep followed by the appearance of an error message
on the display. Use the following key to help you correct these common
programming errors:
2. Firmly grasp light bulb and
pull out.
3. Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
PROBLEM
light
bulb
4. Replace the light cover by
snapping glass cover onto
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
Error Message
Problem
Correction
MODEL ERROR
An incorrect
model number has
been installed.
Call your Viking dealer or
authorized service agency.
RTD ERROR
PROBE ERROR
RTD is open or
shorted.
The meat
probe is open
or shorted.
Power Failure
If the meat probe is plugged
in and the Error message is still
displayed, call your Viking dealer
or authorized service agency.
LATCH ERROR
The control is
unable to lock
or unlock the
door latch.
Call your Viking dealer or
authorized service agency.
KEYBOARD
ERROR
No connection
exists between
the keyboard
and control.
Call your Viking dealer or
authorized service agency.
57
Product Care
Product Care
Do not attempt to use during a power failure. Unit will not
function.
56
Call your Viking dealer or
authorized service agency.
The meat probe may not be
plugged in. If it isn't, plug it in to
the oven. Press the OFF key to
exit and clear the error message.
Service Information
If your oven should fail to operate, check to see whether the
circuit breaker is open or the fuse is blown.
If service is required, call your Viking dealer or authorized service
agency. The name of the authorized service agency can be
obtained from the Viking dealer or distributor in your area.
When you call for service, have the following information readily
available:
• Model number
• Serial number
• Date of purchase
• Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are
unable to obtain the name of an authorized service agency, or
if you continue to have service problems, contact Viking
Range Corporation at 1-888-VIKING1 (845-4641), or write to:
VIKING RANGE CORPORATION
PREFERRED SERVICE
1803 Hwy 82W
Greenwood, Mississippi 38930 USA
Record the following information indicated below. You will need it
if service is ever required. The serial number and model number
for your oven are located on the identification plate mounted on
the bottom left side of the oven door opening.
Model Number _______________ Serial Number____________
Date of Purchase ______________ Date Installed ____________
Dealer's Name _________________________________________
Product Care
Address _______________________________________________
Warranty
PROFESSIONAL SERIES
BUILT-IN ELECTRIC OVENS WARRANTY
THREE YEAR FULL WARRANTY
Built-in electric ovens and all of their component parts, except as detailed below*†, are warranted to be
free from defective materials or workmanship in normal residential use for a period of three (3) years from
the date of original retail purchase or closing date for new construction, whichever period is longer. Viking
Range Corporation, warrantor, agrees to repair or replace, at its option, any part which fails or is found to
be defective during the warranty period.
*FULL NINETY (90) DAY COSMETIC WARRANTY: Product is warranted to be free from
cosmetic defects in materials or workmanship (such as scratches on stainless steel,
paint/porcelain blemishes, etc.) for a period of ninety (90) days from the date of original retail
purchase or closing date for new construction, whichever period is longer. Any defects must be
reported to the selling dealer within ninety (90) days from date of original retail purchase.
Viking Range Corporation uses high quality processes and materials available to produce all
color finishes. However, slight color variation may be noticed because of the inherent
differences in painted parts and porcelain parts as well as differences in kitchen lighting,
product locations, and other factors. Therefore, this warranty does not apply to color variation
attributable to such factors.
†FULL NINETY (90) DAY WARRANTY IN "RESIDENTIAL PLUS" APPLICATIONS: This full
warranty applies to applications where use of the product extends beyond normal residential
use, but the warranty period for products used in such applications is ninety (90) days.
Examples of applications covered by this warranty are bed and breakfasts, fire stations, private
clubs, churches, yachts, etc. Under this "Residential Plus" warranty, the product, its components
and accessories are warranted to be free from defective material or workmanship for a period
of ninety (90) days from the date of original retail purchase. This warranty excludes use of the
product in all commercial locations such as restaurants, food service locations and institutional
food service locations.
FIVE YEAR LIMITED WARRANTY ON BURNERS
Any surface bake element, broil element or convection cook element which fails due to defective materials
or workmanship (excluding cosmetic failures) in normal household use during the fourth through fifth year
from the date of original retail purchase will be repaired or replaced, free of charge for the part itself, with
the owner paying all other costs, including labor. This does not include ignition systems, burner bases, etc.
TEN YEAR LIMITED WARRANTY ON PORCELAIN
Any porcelain oven or porcelain inner door panel which rusts through due to defective materials or
workmanship in normal household use during the fourth through the tenth year from the date of original
retail purchase will be repaired or replaced, free of charge for the part itself, with the owner paying all
other costs, including labor.
TERMS AND CONDITIONS
This warranty extends to the original purchaser of the product warranted hereunder and to each transferee
owner of the product during the term of the warranty and applies to products purchased and located in
the United States and Canada. Products must be purchased in the country where service is requested. If
the product or one of its component parts contains a defect or malfunction during the full warranty period
after a reasonable number of attempts by the warrantor to remedy the defect or malfunction, the owner is
entitled to either a refund or replacement of the product or its component part or parts. Replacement of a
component part includes its free installation, except as specified under the limited warranty. Under the
terms of this warranty, service must be performed by a factory authorized Viking Range Corporation
service agent or representative. Service will be provided during normal business hours, and labor
performed at overtime or premium rates shall not be covered by this warranty.
Owner shall be responsible for proper installation, providing reasonable and necessary maintenance,
providing proof of purchase upon request, and making the appliance reasonably accessible for service.
The return of the Owner Registration Card is not a condition of warranty coverage. You should, however,
return the Owner Registration Card so that Viking Range Corporation can contact you should any question
of safety arise which could affect you.
_______________________________________________________
This warranty gives you specific legal rights, and you may also have other rights which may vary from
jurisdiction to jurisdiction.
If service requires installation of parts, use only authorized parts to
ensure protection under the warranty.
WHAT IS NOT COVERED BY THIS WARRANTY: This warranty shall not apply to damage resulting from
abuse, failure to provide reasonable and necessary maintenance, accident, delivery, negligence, natural
disaster, loss of electrical power to the product for any reason, alteration, outdoor use, improper installation,
improper operation, or repair or service of the product by anyone other than an authorized Viking Range
Corporation service agency or representative. This warranty does not apply to commercial usage.
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This manual should remain with the oven for future reference.
58
59
Warranty (cont.)
LIMITATION OF REMEDIES AND DURATION OF IMPLIED WARRANTY
OWNER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS
PRODUCT SHALL BE THE REMEDIES SET FORTH ABOVE.VIKING IS NOT RESPONSIBLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGE, INCLUDING BUT NOT LIMITED TO FOOD OR
MEDICINE LOSS, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF
WARRANTY, BREACH OF CONTRACT OR OTHERWISE. Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusions may not apply to
you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE OF
THE APPLICABLE EXPRESS WRITTEN LIMITED WARRANTIES SET FORTH ABOVE. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
WARRANTY SERVICE
To obtain warranty service, contact an authorized Viking Range Corporation service agent, or Viking Range
Corporation, 111 Front Street, Greenwood, Mississippi 38930, (888) 845-4641. Provide model and serial
number and date of original purchase or closing date for a new construction. For the name of your nearest
authorized Viking Range Corporation service agency, call Viking Range Corporation.
IMPORTANT: Retain proof of original purchase to establish warranty period.
Specifications subject to change without notice.
60
61
62
63
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising