ProForm 520x User`s manual

ProForm 520x User`s manual
Model No. 831.293050
USER'S MANUAL
Serial No.
Serial
Number
Decal
FIXERCISE_
EOU
I
PM
ENT
HELPLINE!
1-800-736-6879
SEARS, ROEBUCK AND CO.
HOFFMAN ESTATES, IL 60179
Patent Pending
www.proform.com
520x
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS .................................................................
BEFORE YOU BEGIN ...............................................
ASSEMBLY ...............................................................................
OPERATION AND ADJUSTMENT
.............................................................
HOW TO FOLD AND MOVE THE TREADMILL ..................................................
TROUBLESHOOTING ......................................................................
CONDITIONING GUIDELINES ...............................................................
ORDERING REPLACEMENT PARTS ..................................................
FULL 90 DAY WARRANTY ...........................................................
. .......................
Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.
2
3
5
6
8
21
23
25
Back Cover
Back Cover
IMPORTANT PRECAUTIONS
3
The decals shown have been placed on your treadmill. If a decal is missing, or if
it is not legible, please call our toll-free HELPLINE to order a free replacement
decal (see the front cover of this manual). Apply the decal in the location shown.
KEEPHANDSANDFEETAWAY
FROMTHISAREAWHILETHE
TREADMILLIS IN OPERATION.
Note The decal at the right is
shown at 50% of actual size.
Ih me/re
ep_l_ fl_dmK
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORIvP
520x treadmill. The 520x treadmill combines advanced
technology with innovative design to help you get the
most from your exercise program in the convenience
and pdvacy of your home. And when you're not exercising, the unique 520x can be folded up, requiring less
than haft the floor space of other treadmills.
Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and sedal number before calling. The model number of the treadmill
is 831.293050. The serial number can be found on a
decal attached to the treadmill (see the front cover of
this manual for the location).
For your benefit, read this manual carefully before
using the treadmill, If you have additional questions,
please call our toll-free HELPLINE at 1-800-736-6879,
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Book Holder
Water Bottle
Holder (Bottle
not included)
Console
Handgrip Pulse Sensor
Handrail
Lock Knob
Key/Clip
LEFT SIDE
RIGHT SIDE
Circuit Breaker
Foot Rail
Power Cord
Walking Belt
Front Wheel
Cushioned Walking Platform
Rear Roller
Adjustment Bolts
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing matedals. Do not
dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screwdriver (IMP3======- and rubber mallet c:::_.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
treadmill to the upright position as shown. If there are
plastic ties on the pulse sensors, remove them.
Insert one of the Extension Legs (55) into the treadmill as
shown. Make sure that the Extension Leg is turned so
the Base Pad (44) is on the bottom. If necessary, tip the
Uprights (64) forward as you insert the Extension Leg.
Insert the other Extension Leg (not shown) in the same
way.
44
2. With the help of a second person, carefully lower the
Uprights (64) as shown. Note: It may be helpful to place
your foot on one of the Wheels (58) as you tip the
Uprights. Make sure that the Extension Legs (55) _main in the Uprights.
Attach each Extension Leg (55) with an Extension Screw
(35), a 1" Screw (13), and a Base Pad (44) as shown.
Note: One replacement Base Pad (44) may be included.
If a Base Pad becomes worn and needs to be replaced,
use the replacement Base Pad.
o
55
55 --_4.4_""_
13
\\\t\\\\\\\l
6
3. With the help of a second person, carefully tip the
Uprights (64) back to the vertical position.
3
35
32
Attach the Latch Assembly (32) to the left Updght (64)
with two Extension Screws (35).
4. Orient one of the Handgrip Extensions (34) as shown and
insert it as far as possible into the post on the left Updght
(64). If necessary, tap the Handgdp Extension with a rubber mallet to fully insert it. Attach the Handgdp Extension
with two Extension Screws (35), one towards the front of
the post, and the other towards the back.
4
34
Attach the other Handgrip Extension to the post on the
right Upright (not shown) in the same way.
35
5. See the inset drawing. Identify the Left Top Handgdp
(31); there are identifying marks inside the Handgdps. Set
the Left Top Handgdp on the left Handgrip Extension
(34). Insert two 112"Screws (33) into the two holes In
the Handgrip Extension indicated by the arrows.
Tighten the Screws into the Left Top Handgrlp.
Important: Do not insert the two 1/2" Screws (33) into
the wrong holes in the Handgrip Extension (34), or
tighten the Screws into the plastic bosses on the bottom of the Left Top Handgrip (31).
6. Attach the matching Left Bottom Handgdp (104) with
three 112" Screws (33).
6
Attach the Right Top Handgrip and the Right Bottom
Handgdp (not shown) as described above.
7. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen
wrench in a secure place; the allen wrench is used to adjust the walking belt (see page 24). To protect the
floor or carpet from damage, place a mat under the treadmill.
7
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE TM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking platform. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
an equipment-grounding conductor and a grounding
plug. Plug the power cord into • surge suppressor,
and plug the surge suppressor into an appropdate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCl-equipped outlets.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illustrated in drawing I below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a pmpedy
grounded outlet is not available.
_Jr---Grounded
_'-1
[I
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your treadmill being damaged, always
use a surge suppressor with your treadmill (see
drawing I at the right). To purchase a surge suppressor, see your local SEARS dealer or cell 1-800366-7278 and order part number 146148.
Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 volts or less
and a minimum surge disslpaUon of 450 joules.
The surge suppressor must be electdeally rated
for 120 volts AC and 18 amps. There must be a
monitoring light on the surge suppressor to indlrate whether it is functioning properly. Failure to
use a properly functioning surge suppressor could
result in damage to the control system of the
treadmill. If the control system is damaged, the
walking belt may change speed or stop unexpectedly, which may result In a tall and serious Injury.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shook. This product is equipped with a cord having
_Surge
_._ F_
:'liP.
Outlet Box
Suppressor
Grounding Pin
i
- O?2o2:P,n
oun0e°O.°t
Loun,
2
Grounded Outlet Box
f_'/l_,,,v.-_
c'apter
Surge Suppressor
Metal Screw
The temporary adapter should be used only until a
propedy grounded outlet (drawing 1) can be installed
by a qualified electrician.
The graen-colorad dgid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a propedy grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers ere not grounded. Contact a qualified electrician to determine If the outlet box cover Is
grounded before using an adapter.
CONSOLE DIAGRAM
Manual/Program Indicators
Display
Program Display
_,L
Display
Program Profiles
veer
Note: If there is a thin sheet of plastic
on the face of the console, remove it,
The console also features new iFIT.com interactive
technology. IFIT.com technology is like having a personal trainer dght in your home. Using the included
audio cable, you can connect the treadmill to your
home stereo, portable stereo, or computer and play
special iFIT.com CD programs ( iFIT.com CDs are
available separateiy). IFIT.com CD programs automatically control the speed and incline of the treadmill as a
personal trainer guides you through every step of your
workout. High-energy music provides added motivation.
Each CD features two programs designed by certified
personal trainers.
In addition, you can connect the treadmill to your VCR
and TV and play iFIT.com video programs (videocassettes are available separately). Video programs offer
the same benefits as iFIT.com CD programs, but add
the excitement of working out with a class and an
instructor---the hottest new trend at health clubs.
FEATURES OF THE CONSOLE
With the treadmill connected to your computer, you
can also go to our Web site at www.iFIT.com and access programs directly from the intemet. Additional options are soon to be available. See www.iFIT.nom for
details.
The advanced console offers an impressive army of
features to help you get the most from your exercise.
When the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
a touch of a button. As you exercise, the console will
display continuous exercise feedback. You can even
measure your heart rate using the built-in handgrip
pulse sensor or the optional chest pulse sensor (see
page 20).
To purchase iFIT.com CDs or videocassettes, see
your local SEARS or call toU-free 1-800-735-0768.
To use the manual mode of the console, follow the
steps beginning on page 10. To use a personal trainer
program, see page 12. To use a heart rate program,
see page 13. To use an IFIT.com CD or video program, see page 17. To use an iFrr.com program directly from our Web site, see page 19.
Four certified personal trainer programs are also
offered. Each program automatically controls the
speed and incline of the treadmill to give you an effective workout. Two heart rate programs are also featured. Each program controls the speed and incline of
the treadmill to keep your heart rate near a target level
dudng your workouts.
9
HOW TO TURN ON THE POWER
B
I_
display speed and distance in either miles or
kilometers. For simplicity, all Instructions in
this section refer to miles.
Plug in the power cord (see page 8).
To stop the walking belt, press the Stop button.
The Time/Incline/Segment Time display will begin
to flash. To restart the walking belt, press the Start
button or the Speed A button.
Stancl on the foot rails of the treadmill. Find the clip
attached to the key (see the drawing on page 9)
and slide the clip onto the waistband of your
clothes. Next, insert the key into the console. After
a moment, the displays and vadous indicators will
light. Test the clip by carefully taking e few
steps backward until the key is pulled from the
console. If the key is not pulled from the console, adjust the position of the clip.
Note: Dudng the first few minutes that the treadmill
is used, inspect the alignment of the walking belt,
and align it if necessary (see page 24).
B
Change the incline of the treadmill as desired.
To change the incline of
the treadmill, press the
Incline buttons. Each time
ol INCLINEIi1. I
a button is pressed, the
t...SEGUENrr_E r_
incline will change by
0.5%. Note: After the buttons are pressed, if may take a moment for the
treadmill to reach the selected incline setting.
£
B
Insert the key fully into the console.
See HOW TO TURN ON THE POWER above.
B
1_"_Follow your progress with the displays.
Select the manual mode.
The program display-When the manual mode
or the iFIT.com mode is
selected, the program
display will show a track
representing 1/4 mile. As
you exercise, the indicators around the track will light in sequence until you
have completed 1/4 mile. A new lap will then
begin.
When the key is inserted, the manual
mode will be selected
and the Manual Control
indicator will light. If a
program has been
selected, press the Program button repeatedly to
reselect the manual mode.
B
I
Press the Start button or the Speed A button to
start the walking belL
Calories/Fat Calories/
Heart Rate display-E
HEART RATE •
This display shows the
approximate numbers of
calories and fat calories
you have burned (see
FAT BURNING on page 25). The display will
change from one number to the other every few
seconds, as shown by the indicators beside the
display. The display will also show your heart rate
when you use the handgdp pulse sensor (see
step 6 on page 11) or the optional chest pulse
sensor (see page 20).
A moment after the button is pressed, the
walking belt will begin to
move at 1 mph. Hold the
_PE£D
MIN/M#.E_)_"
handrails and begin
walking. As you exercise, change the speed of the walking belt as desired by pressing the Speed V and A buttons.
Each time a button is pressed, the speed setting
will change by 0.1 mph; if a button is held down,
the speed setting will change in increments of 0.5
mph. To change the speed setting quickly, press
the Quick Speed buttons. Note: The console can
10
I
Time/Incline/Segment
Timedisplay--When
themanualmodeorthe
iFIT.commode is se-
To reset the displays, press the Stop button, remove the key, and then reinsert the key.
I__ SEGMENT TIME
TIME
r_
lected, this display will
show the elapsed time
and the incline level of the treadmill. The display
will change from one number to the other every
few seconds, as shown by the indicators beside
the display. When a personal trainer program or a
heart rate program is selected, the display will
show the time remaining in the program, the time
remaining in the currant segment of the program,
and the incline level. Note: Each time the incline
changes, the display will show the current incline
setting for several seconds.
Measure your heart rate, If desired.
Note: Before using the handgdp pulse sensor,
make sure that your hands are clean.
To measure your
heart rate, stand
on the foot rails
and place your
hands on the
metal contacts on
the handrail. Your
palms must be
resting on the contactHvoId
moving your hands. When your
pulse is detected, the Heart Rate indicator beside
the Calories/Fat Calories/Heart Rate display will
light, two dashes (--) will appear, and then your
heart rate will be shown. For the most accurate
heart rate reading, continue to hold the contacts for about 15 seconds.
Distance/Laps
display--This display
shows the distance that
you have walked or run
and the number of 1/4mile laps you have completed. The display will change from one number
to the other every few seconds, as shown by the
indicator beside the display.
B
Speed/Min-Mile
display--This display
shows the speed of the
KmlH
walking belt and your
SPEED
MINIMILE(_n)"
current pace (pace is
measured in minutes per
mile). The display will change from one number to
the other every few seconds, as shown by the indicators beside the display. Note: Each time the
speed changes, the display will show the current
speed setting for several seconds.
When you are finished exercising, remove the
key.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
when the treadmill Is folded to the storage position or the treadmln will be damaged. Next, remove the key from the console and put it in a secure place. Note: If the displays and various Indicators on the console ramain lit after the key Is
removed, the console is in the "demo" mode.
See page 20 and turn off the demo mode.
I
Note: When the Km/H indicator is lit, the console
will display speed and
distance In kilometers;
SPEED
when the Km/H indicator
is not lit, the console will
display speed and distance in miles To change
the unit of measurement, first hold down the Stop
button while inserting the key into the console. An
"E" for English miles or an =M"for metdc kilometers
will appear In the display. Press the Speed L_button to change the unit of measurement. When the
desired unit of measurement is selected, remove
the key and then rainsert it.
When you are finished using the treadmill, unplug
the power cord.
-I
11
i_iriiiii
B
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page
t0.
B
Select one of the personal trainer programs.
When the key
C_qRflEO p£_lOtL4L W
_
is inserted, the
manual mode
will be selected. To se_
COf4TROL
lect a personal
/
trainer program, press the Program button repeatedly until
one of the tour personal trainer program indicators
lights. When a personal trainer program is selected, the Time/Incline/Segment Time display will
flash the maximum incline setting for the program
for six seconds, and the Speed/Min-mile display
will flash the maximum speed setting.
The four profiles on the right side of the console
show how the speed and incline of the treadmill
will change during the programs. The numbers
beside the profiles show the maximum speed and
incline settings for the programs.
The program display
will show the first four
speed settings for the
program. The Time]
Incline/Segment Time
display will show how
long the program will
last.
_
be programmed for conCurrent Segment
secutive segments.) The
speed setting for the
first segment will be
shown in the flashing
Current Segment column of the program display. (The incline settings are not shown in the program display.) The
speed settings for the next four segments will be
shown in the four columns to the right.
When only three seconds remain in the first segment of the program, both the Current Segment
column and the column to the right will flash and a
tone will sound. In addition, if the speed and/or
incline of the treadmill is about to change, the
Speed/Min-mile display and/or the Time/Incline/
Segment Time display will flash to alert you, and
three tones will sound. When the first segment is
completed, all speed settings will move one column to the left. The speed setting for the second
segment will then be shown in the flashing
Current Segment column and the treadmill will automatically adjust to the speed and incline settings
for the second segment. Note: If all of the indicators in the Current Segment column are lit after the
speed settings have moved to the left, the speed
settings will move downward so that only the highest indicators appear in the LED matrix. If some of
the indicators in the Current Segment column are
not lit when the speed settings move to the left
again, the speed settings will move back up.
The program will continue in this way until the
speed setting for the last segment is shown in the
Current Segment column and no time remains in
the Time/Incline/Segment Time display. The walking belt wil! then slow to a stop.
If the speed or incline setting for the current
segment is too high or too low, you can manually
override the setting by pressing the Speed or
Incline buttons. Every few times one of the Speed
buttons is pressed, an additional indicatorwill light
or darken in the Current Segment column. If any of
the columns to the right of the Current Segment
column have the same number of lit indicators as
the Current Segment column, an additional indicator may light or darken in those columns as well.
Important: When the current segment of the
program ends, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
Press the Start button or the Speed a button to
start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Each program is divided into several time segments of different lengths. (The Time/Incline/
Segment Time display will show both the time remaining in the program and the time remaining in
the current segment.) One speed setting and one
incline setting are programmed for each segment.
(The same speed settingand/or incline setting may
12
To stop the program temporarily, press the Stop
button. The Time/Incline/Segment Time display
will begin to flash. To restart the program, press
the Start button or the Speed/_ button. To end the
program, press the Stop button, remove the key,
and then reinsert the key.
L_l Follow your progress with the displays.
See step 5 on page 10.
I_
Measure your heart rate, if desired.
Follow the steps below to use a heart rate program.
Note: You must wear the optional chest pulse sensor (sea page 20) to use a heart rate program.
See step 6 on page 11.
r_When
the the
program
is completed, remove the
key from
console.
B
When the program has ended, make sure that
the Incline of the treadmill Is at the lowest setting. Next, remove the key from the console and
put it in a safe place. Note: If the displays and
various indicators on the console remain lit
after the key is removed, the console is in the
"demo" mode. See page 20 and turn off the
demo mode.
Put on the chest pulse sensor.
See the instructions included with the optional
chest pulse sensor.
B
Insert the key fully Into the console.
See HOW TO TURN ON THE POWER on page
10.
When you are finished using the treadmill, unplug
the power cord.
!_1 Select a heart rate program.
When the key is
inserted, the
manual mode
will be selected.
e weqw _ _w_d
m 1_wpdw _
m _
_
To select a
heart rate proa*,.l*ee,eler
•
le_
gram, press the
Program button repeatedly until one of the two
heart rate program indicators lights.
The two profiles on the left side of the console
show how the target heart rate will change during
the programs. The numbers above the profiles
represent percentages of your estimated maximum heart rate. Note: Your estimated maximum
heart rate is determined by subtracting your age
from 220. For example, if you are 30 years old,
your estimated maximum heart rate is 190 beats
per minute (220 - 30 = 190). If you are 30 years
old, a target heart rate setting of 50% is equal to
95 beats per minute (50% of 190 is 95).
,
13
Dudng heart rate programs, the program
display will show a
graphic that represents
your heart rate. Each
time a heartbeat is detected, an additional
peak will appear.
B
Dudng the program, the console will regulady
compare your heart rate to the current target heart
rate setting. If your heart rate is too far below or
above the target heart rate setting, the speed of
the treadmill will automatically increase or decrease to bring your heart rate closer to the target
heart rate setting. If the speed reaches the maximum speed limit for the program (see step 6 at
the left) and your heart rate is still too far below
the current target heart rate setting, the incline of
the treadmill will also increase to bring your heart
rate closer to the target heart rate setting.
[email protected]
DO00000
[email protected]@[email protected]@
Enter your age.
When a head rate program is selected, the let-
HEART RATE
•
,_-_
The program will continue until no time remains in
the program. The walking belt will then slow to a
stop.
ters AGE and the current
_1 _L_ L L-- J
J__
age setting will begin to
_'ArCALS.
CALS.
flash in the Calories/
Fat Calories/Heart Rate
display. You must enter your age to use a heart
rate program. If you have already entered your
age, go to step 5. If you have not entered your
age, press the Incline (Age Set) buttons until your
age is shown. Your age will then be saved in memo_.
If the speed or incline setting is too high or too
low, you can adjust the setting with the speed or
incline buttons. However, each time the console
compares your heart rate to the current target
heart rate setting, the speed and/or incline of the
treadmill may automat'realLy change to bdng your
heart rate closer to the target heart rate setting.
_'_ Adjust the maximum speed limit for the
program.
If your pulse is not detected dudng the program,
the letters PLS will flash in the Calories/Fat
Calories/Heart Rate display and the speed and incline of the treadmill may automatically decrease
until your pulse is detected. If this occurs, see the
instructions included with the chest pulse sensor.
When a heart rate proKrnlH
gram is selected, the letters SPd (speed) and the
maximum speed limit for
SPEED
MIN/MILE{Io_)."
the program will flash in
the Speed/Min-MUe display. If desired, change the maximum speed limit
by pressing the Quick Speed buttons.
[
r_
-g
To stop the program at any time, press the Stop
button. Heart rate programs should not be stopped
temporarily and then restarted. To use a heart rate
program again, reselect the program and start it at
the beginning.
Press the Start button or the Speed A button to
start the program.
B
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails
and begin walking.
Follow your progress with the displays.
See step 5 on page 10.
r_
Each heart rate program is divided into one-minute
segments. (The Time/Incline/Segment Time display wilt show both the time remaining in the program and the time remaining in the current segment of the program.) One target heart rate setting is programmed for each segment. (The same
target heart rate setting may be programmed for
consecutive segments.)
When the program is completed, remove the
key from the console.
See step 6 on page 13.
14
HOW TO CONNECT YOUR PORTABLE STEREO
To use iFIT.com CDs, the treadmill must be connected
to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 15 and
16 for connecting instructions.To use iFIT.com videocassettes, the treadmill must be connected to your
VCR. See page 17 for connecting instructions.To use
iFrr.com programs directly from our internet site,
the treadmill must be connected to your home computer. See page 16 for connecting instructions.
Note: If your stereo has an RCA-type AUDIO OUT
jack, see Instruction A below. If your stereo has a
3.5mm LINE OUT jack, see Instruction B. If your
stereo has only a PHONES jack, see Instruction C.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES jacks, see Instruction A below. If your CD
player has only one jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable intothe LINE OUT jack on
your stereo.
A
B
II
.
[email protected],
i @_
i
Aud o
Cable
_
/
phones
.; J
i
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter (available at electronics stores). Plug the Y-adapter into
the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.
]
Cab,e ,
C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
B
C
11
.
0.................
i_] ('_i
i
'_-Ji
3.Smm__
Audio
Cable
Y-adapter
/
II
Headphones
.
................;
r_ _--)i
Audio
_-[_]
] Cable
=,, L_____j
",""":'-":!==_f_Ii_=..c:_
3.5mm __
Y-adapter
y
l
Headphones ---_-c::_. J
15
t
1
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT Jack is
being used, see instruction B.
Note: If your computer has e 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
A
=
!_
• ........
*°..°.
_.°°°.....o.._I.°Z
II
_
i
Cable
=
--
W
v
i'_'_]
i"-" v
i
Audio
Cable
"--:.":_':
Adapter--_
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
Y-adapter. Plug the Y-adapter into the LINE OUT
jack on your stereo.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B
II
a
_
:O...1--i
i....°°°°o°_
b, .
Headphones/S
'
RCA
f J_']'_i
i_'F_
Audio
i
CabLe
w
._=
Y-adapteT
Adapter
Wire removed from
LINE OUT jack
16
HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. if you have a TV
with a built-in VCR, see Instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
To use iFIT.com CDs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on page
15 and 16. Note: To purchase IFIT.coro CDs or
videocassettes, call toll-free 1-800-735-0768.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
Follow the steps below to use an iFIT.com CD or video
program.
A
B
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
B
When the key is inserted, the manual
mode will be selected.
To use iFIT.com CDs or
videocassettes, press
the Program button repeatedly until the iFIT.com indicator lights.
S. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
Y-adapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.
1_1 Insert the iFrr.coro CD or vldeocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
B
B
I
.
,.........._--:
RCA Y-adapter-_
i_(0)
i
Audio
i ,'_ I-_
[
Cable
|
Adapter
Press the PLAY button on your CD player or
VCR.
A moment after the button is pressed, your personal trainer will begin guiding you through your
workout. Simply follow your personal trainer's
instructions. Note: If the Time/Incline/Segment
Time display is flashing, press the Start button or
the Speed z_button on the console. The treadmill
will not respond to a CD or video program when
the Time/Incline/Segment Time display is flashing.
{_:-_::-:...,
y_..........- ,
h
Select the IFIT.com mode.
/
Wire removed from--->.c_=J
AUDIO OUT jack
During the CD or video program, an electronic
"chirping" sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the "chirp" and be
prepared for speed and/or incline changes. In
some Instances, the speed end/or Incline may
change before the personal trainer deecrlbes
the change.
17
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
• Make sure that the audio cable Is properly
connected, that it is fully plugged in, and that
It is not wrapped around a power cord.
heard, the speed and/or incline will change to
the next settings of the CD or video program.
• If you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console,
To stop the walking belt at any time, press the
Stop button on the console. The Time/Incline/
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed Z_button. After a moment, the walking belt
will begin to move. When the next "chirp" is
heard, the speed and incline will change to the
next settings of the CD or video program.
When the CD or video program is completed, the
walking belt will stop and the TimellnclinelSegment
Time display will begin to flash. Note: To use another CD or video program, press the Stop button
or remove the key and go to step 1 on page 17.
• See the instructions near the bottom of page
24.
[]Follow
your progress with the LED track and
the displays.
See step 5 on page 10.
r_
Measure your heart rate, if desired.
See step 6 on page 11.
B
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard:
When the program is completed, remove the
key.
See step 6 on page 13.
• Make sure that the IFIT.com indicator Is lit and
that the Time/incline/Segment
Time display is
not flashing. If the Time/Incline/Segment Time
display is flashing, press the Start button or
the Speed Z_button on the console.
CAUTION: Always remove iFIT.com CDs and
videocassettes from your CD player or VCR
when you are finished using them.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the console may not detect the program signals.
18
B
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking. Dudng the program, an electronic
"chirping"sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the "chirp" and be
prepared for speed and/or incline changes.
OurWeb
site at www.iFIT.com allows you to access
basic programs, audio programs, and video programs
directly from the internet. Additional options are soon to
be available. See www.iFIT.com for details.
To use programs from our Web site, the treadmill must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 16. In
addition, you must have an intemet connection and
an intemet service provider. A list of specific system requirements will be found on our Web site.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
heard, the speed and/or Incline will change to
the next settings for the program.
Follow the steps below to use a program from our
Web site.
U
Insert the key into the console.
To stop the walking belt at any time, press the
Stop button on the console. The Time/Incline/
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed L_button. After a moment, the walking belt
will begin to move. When the next "chirp" is
heard, the speed and incline will change to the
next settings of the program.
See HOW TO TURN ON THE POWER on page 10.
B
Select the iFIT.com mode.
When the key is ino
serted, the manual
mode will be selected.
To use a program from
our Web site, press the
Program button repeatedly until the iFIT.com indicator lights.
g
When the program is completed, the walking belt
will stop and the Time/Incline/Segment Time display will begin to flash. Note: To use another program, press the Stop button and go to step 5.
Go to your computer and start an internet
connection.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make
sure that the IFIT.com indicator is lit and that
the Time/incline/Sogment Time display is not
flashing. In addition, make sure that the audio
cable Is properly connected, that it is fully
plugged In, and that it is not wrapped around a
power cord.
Lq Start your web browser, if necessary, and go to
our Web site at www.iFIT.com.
g
Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the clip onto the waistbend of your clothes,
Follow the desired links on our Web site to select e program.
Read and follow the on-line instructionsfor using a
progmm.
1_1 the
Follow
your progress with the LED track and
displays.
See step 5 on page 10.
r,_ Follow the on-line Instructions to start the
program.
L_When
When you start the program, an on-screen countdown will begin.
the program has ended, remove the key.
See step 6 on page 13.
19
THE INFORMATION MODE/DEMO MODE
THE OPTIONAL CHEST PULSE SENSOR
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
An optional chest pulse sensor adds even more features to the console. The chest pulse sensor offers
hands-free operation, and enables you to use the consows two heart rate programs. To purchase the
chest pulse sensor, call toll-free 1-800-734-2377.
To select the informationmode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following information will be shown:
The "rime/Incline/Seg ment
Time display will show the
total number of hours the
treadmill has been used.
E
?I
_"
i
INCLINE
SEGMENT
J
TIME
5
[
TIME
The Distance/Laps display
will show the total number of
miles (or kilometers) that the
walking belt has moved.
An =E"for english miles or an
"M" for metric kilometers will
appear in the Speed/Min-Mile
display. Press the Speed Z_
button to change the unit of
measurement.
[
SPEED
MINIMILE(km)"
play should be blank. If a =d"
Fat
Calories/Heart Calories/
Rate dis(___-_
_.__
IMPORTANT:
or Ue_r
appears in the The
display, the
farces,_T%
c,u.s. I
console is in the =demo"
mode. This mode is intended
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a "d" appears in the Calorles/Fat Calories/Heart Rate display
when the information mode is selected, press the
Speed _7button so the display is blank.
To exit the information mode, remove the key from the
console.
20
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. CAUTION: To decrease the possibility of
injury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. Raise the treadmill about halfway
to the vedical position.
2. Move your dght hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob
to the left and hold it. Raise the treadmill until the catch is
past the latch pin. Slowly release the latch knob. Make
sure that the catch is securely held by the latch pin.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direot sunlight. Do not leave the treadmill In the storage position in temperatures above 85 ° Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the catch
is securely held by the latch pin.
1. Hold the handrails as shown and place one foot against a
wheel.
2. Tilt the treadmill back until it rollsfreely on the wheels.
Carefully move the treadmill to the desired location.
Never move the treadmill without tlpp/ng It back. To
reduce the risk of Injury, use extreme caution while
moving the treadmill. Do not attempt to move the
treadmill over an uneven surface.
3. Place one foot on a wheel, and carefully lower the treadmill until it is resting in the storage position.
21
[
HOW TO LOWER THE TREADMILL
FOR USE
1. Hold the upper end of the treadmill with your right hand
as shown. Using your left hand, pull the latch knob to the
left and hold it. Pivot the treadmill down until the frame is
past the pin. Slowly release the latch knob.
Open
LG
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. Do not drop the treadmill frame
to the floor. CAUTION: To decrease the possibility of
injury, bend your legs and keep your back straight,
22
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Rnd the symptom that
applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).
PROBLEM:
The power does not turn on
SOLUTION:
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 8). Use only a single-outletsurge suppressor
that meets all of the specifications descdbed on page 8. Important: The treadmill is not compatible
with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
near the power cord. If the switch protrudes as
shown, the circuit breaker has tdpped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
PROBLEM:
C
Tdpped[_
Reset_
The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the
circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for
five minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key fully into the console.
d. If the treadmill still will not run, please call our toll-free HELPLINE.
PROBLEM:
The speed display on the console does not function properly
SOLUTION: a. Remove the key and UNPLUG THE POWER CORD.
Carefully lower the Updghts (64) to the floor, Remove
the three indicated Small Screws (37).
Raise the Updghts (64) to the vertical position. Pivot
the Hood (1) off.
23
37
Locate the Reed Switch (18) and the Magnet (101 ) on
the left side of the Pulley (78). Tum the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8". If necessary, loosen the 3/4"
Screw (24) and move the Reed Switch Slightly.
Retighten the Screw. Re-attach the hood, and run the
treadmill for a few minutes to check for a correct
speed reading.
PROBLEM:
1/8"-_
.-.-78__
18>
II
--
Top
View
oil
The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.
b. If the walking belt is overUghtened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts countemlockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches oft the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, inserf the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.
PROBLEM:
The walking belt Is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the key
and UNPLUG THE POWER CORD. If the walking
belt has shifted to the left, use the allen wrench to
tum the left rear relier bolt clockwise 112 of a turn; if
the walking belt has shifted to the right, turn the
bolt countemlockwise 112 of a turn. Be careful not to
overtighten the walking belt. Plug In the power cord,
insert the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
a
b. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, tum both rear roller bolts clockwise,
1/4 of a tum. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be
careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the
treadmill for a few minutes. Repeat until the walking
belt is properly tightened.
PROBLEM:
The Incline of the treadmill does not change correctly or does not change when IFIT.com
CDs and videos are played
SOLUTION:a. With the key inserted in the console, press one of the Incline buttons. While the incline Is
changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically dse to the maximum incline level and then return to the minimum level. This will recalibrate
the incline.
24
CONDITIONING
GUIDELINES
ergy. Only after the first few minutes does
begin to use stored fat calories for energy.
is to burn fat, adjust the speed and incline
mill until your heart rate is near the lowest
your training zone.
your body
If your goal
of the treadnumber in
For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise
The following guidelines will help you to plan your exercise program. For more detailed exercise information, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to bum fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.
HEART RATE TRAINING ZONES
Age 20
30
50
60
" 70
80
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The throe numbers define your "training zone." The lower two numbers are recommended
heart rates for fat buming; the higher number is the
recommended heart rate for aerobic exercise.
If your goal is to strengthen your cardiovascular system, your exercise must be "aerobic." Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For eembic exemise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.
WORKOUT GUIDELINES
Each workout should include the following three pads:
A Warm-up---Start each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.
Training Zone Exercise--After warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exercise--never
hold your breath.
A Cool-down--Finish
To measure your heart rate during exercise, use the
pulse sensor.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
25
J
each workout with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-exercise problems.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch--never
bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees
and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times for each leg. Stretches: Hamstrings,
lower back and groin.
I
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wail. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance,
one foot with your other hand. Bring your
buttocks as possible. Hold for 15 counts,
times for each leg. Stretches: Quaddeeps
reach back and grasp
heel as close to your
then relax. Repeat 3
and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps
and hip muscles.
26
3
2
NOTES
27
REMOVE THIS EXPLODED DRAWING AND PART
LIST FROM THE MANUAL
Save this EXPLODED DRAWING and PART LIST for future reference.
Note: Specifications are subject to change without notice. For information about
ordering replacement parts, see the back cover of the User's Manual.
EXPLODED DRAWING--Model
No. 831.293050
Rogo2A
37
37
33
41
24
36
18
50
42
0
0
21
33
90
35
J
31
•"
54
37
33
46
77
33
35
100"
I
56
86
86
96
12
8O
57
91
92
33
87
i
.-"
100"
95
57
92
51
55
33
PART LISTmModel NO. 831.293050
Key
No.
Qty.
Description
Key
No.
Qty.
1
1
Motor Hood
42
1
Console
2
3
4
2
8
1
Large Isolator
Pivot Nut
Motor Belt
43
44
45
1
6
2
Right Foam Grip
Base Pad
Platform Screw (Rear)
5*
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1
1
1
2
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
18
1
1
1
4
1
Motor Assembly
Flywheel
Motor
Frame Spacer
Hole Plug
Front Roller Adj. Bolt
Motor Pivot Bolt
Lift Frame Pivot Bolt
1" Screw
Motor Tension Nut
Motor Washer
Motor Pivot Nut
Motor Tension Bolt
Reed Switch
2" Incline Motor Bolt
Reed Switch Clip
Lift Frame
Motor Star Washer
Controller Bracket
3/4" Screw
Controller
Choke
Power Board
Plastic Stand-Oft
Power Board Bracket
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
1
1
1
1
1
1
1
2
4
2
2
2
2
1
1
1
1
2
1
1
1
2
1
1
2
Crossbar
Ground Screw
Ground Washer
Upright Wire
Right Cup Holder
Frame
Incline Motor Bolt
Caution Decal
Pulse Sensor
Extension Leg
Wheel Bolt
Roller Star Washer
Wheel
Incline Motor
Stop Bracket
Power Cord
Grommet
Static Decal
Upright
Circuit Breaker
Audio Wire Nut
Isolator Bracket Cover
Belly Pan
Audio Wire
Frame Pivot Bolt
30
31
32
33
34
35
1
1
1
23
2
16
36
37
38
39
40
41
1
29
1
1
1
1
Key/Clip
Left Foam Grip
Latch Assembly
1/2" Screw
Handrail Extension
Extension Screw/
Handlebar Screw
iFIT.com Wire
Small Screw
Console Base
Left Cup Holder
Console Back
Book Holder
71
72
73
74*
75
76
77
78
79
80
81
82
83
2
4
2
1
4
2
t
1
1
1
9
1
3
Base Endcap
Isolator
Belt Guide
Isolator Assembly
Platform Screw
Foot Rail
Walking Belt
Front Roller/Pulley
Console Ground Wire
Walking Platform
8" Cable Tie
Left Bottom Handgrip
Tie Holder Clamp
Description
Rogo2A
Key
No.
Qty.
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
2
1
2
1
1
1
1
2
2
1
1
1
1
1
2
1
Releasable Tie
Pulse Wire
Staple Cover
Rear Roller
Rear Foot (Right)
Motor Controller Wire
iFIT.com Jack
Rear Roller Adj. Bolt
Roller Adj. Washer
Rear Endcap (Right)
Allen Wrench
Rear Foot (Left)
Rear Endcap (Left)
Warning Decal
Latch Plate Screw
Latch Plate
100"
2
101
102
103
104
105
106
107
108
109
110
#
#
#
#
#
#
#
1
1
1
1
2
1
4
1
2
2
1
1
1
1
1
1
1
Extension Leg
Assembly
Magnet
Belly Pan Clip
Front Endcap (Right)
Right Bottom Handgdp
isolator Bolt
GroundWire
Endcap Screw
Front Endcap (Left)
IsolatorTop Cap
IsolatorBottom Cap
8" White Wire, 2F
8" White Wire, M/F
14" Blue Wire, 2F
4" Blue Wire, 2F
14" Green Wire, F/R
4" Red Wire, M/F
User's Manual
Description
#These parts are not illustrated
* Includes all parts shown in the
box
SEARS
The model number and serial number of your PROFORM • 520x
treadmill are listed on a decal attached to the frame. See the front
cover of this manual to find the location of the decal.
Model No. 831.293050
QUESTIONS?
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.
If you find that:
• you need help assembling or
operating the PROFORM 520x
treadmill
When requesting help or service, or ordering parts, please be
prepared to provide the following information:
• a part Is missing
• The NAME OF THE PRODUCT (PROFORM ®520x treadmill)
• or you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
Monday-Saturday, 7 am-7 pm
Central Time (excluding holidays)
• The MODEL NUMBER OF THE PRODUCT (831.293050)
• The KEY NUMBER AND DESCRIPTION OF THE PART (see the
EXPLODED DRAWING and PART LIST in the center of this
manual)
REPLACEMENT
PARTS
If parts become worn and need
to be replaced, call the following
toll-free number
1-800-FON-PART
(1-800-366-7278)
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in matedal or workmanship in this
SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge.
This warranty does not apply when the TREADMILL EXERCISER is used commerciallyor for rental purposes.
This warranty gives you specific legal rights, and you may also have other dghts which vary from state
to state.
SEARS, ROEBUCK AND CO, DEPT 817WA, HOFFMAN ESTATES, IL 60179
Part No. 187138 RO902A
Pdnted in USA © 2002 Sears, Roebuck and Co.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement