ADC HiGain HMS-318 Specifications

ADC HiGain HMS-318 Specifications
www.greenlee.com
COMMUNICATIONS
Greenlee Communications offers industry-leading tools
for datacom, telecom, and fiber optic applications. Choose
from a large lineup of premium installation tools, tone
generators, fiber optic equipment, and more – all field
tested to perform.
Contents
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
Hand Tools
HDMI Tools
Wire & Cable Indentification
Structured Wiring Testers
Cable Service Testing
CATV Test Sets
Buried Facility Location & Marking
Communications Kits
Termination & Testing
Fiber Optic Tools
Fiber Optic Testing
Fiber Optic Kits
276
306
308
320
325
333
336
341
352
353
356
369
COMMUNICATIONs
Hand
TOOLS
Telecom Splice Crimpers
• Side cutter for AWG 19-26 copper.
• Non-slip grips for precision control.
• Crimp capacity
– UR: AWG 19-26
– UY: AWG 22-26
– UG: AWG 19-26
PA1180 only
• Stripping cavity for AWG 22 wire.
• Needle-nose with knurled surface for gripping, wrapping and looping.
PA1180
Cat. No.
PA1180
PA1178
Description
4-in-1 Telecom Splice Crimper
Telecom Splice Crimper
PA1178
Round Cable Cutters
• Cuts solid or stranded cable up to AWG 6.
• Precise and effortless cuts.
• Round cutting form won't deform cables.
• Ideal for UTP and Coax, RG58, RG59 and RG6/6Q;
RG7 and RG11 with PA1175.
PA1175
Cat. No.
Description
PA1175
PA1179
Contour Round Cable Cutter
Dual-Contour Round Cable Cutter
PA1179
Cable Cutter, 8 AWG
• Designed to cut solid, stranded wire up to 8 AWG (10 mm²)
and multi-­conductor cable up to 1/2" (12.7 mm) in diameter.
• Curved cutting blades ensure an easy cut.
• Economically priced.
• Cushioned-grip handle for comfortable use.
• Heat-treated for long life.
• Stamped and precision ground from high-carbon tool steel.
• Return spring.
• Locking latch.
• Rust-resistant black oxide finish.
Cat. No.
45482
TRUSTED
276
SINCE
1862
USA
UPC No.
45482
PHONE 800.435.0786
FAX 800.451.2632
Description
Cable Cutter
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Cable Splicer’s Knife and Splicer's Snips
• Cuts cable, telephone wire and strips insulation.
• Tough, tempered steel knife blade holds its edge longer.
• Full-sized knife handle provides greater comfort.
• Knife has a short, coping-type blade made of the finest cutlery steel.
• Scissors have an upper blade with two stripping notches to strip
most ­insulations from 19-24 AWG.
PT-K01A
Cat. No.
UPC No.
Description
PT-K01A
PT-T01
PT-T02
PT-C01
PA1931
12997
08707
08708
08702
Scissors and Knife Kit in Pouch
Cable Splicer’s Knife
Electrician’s Snips
Two-Pocket Leather Pouch
Datacomm Snips
PT-T01
PT-T02
PA1931
DataComm Snips, Electrician's Snips
• Cuts, strips and trims data and phone cables.
• Ergonomic design nests in hand for comfort and added cutting power.
• One fully serrated blade for clean cuts.
• “V” stripping notches for 19 and 23 AWG wire.
• Manufactured from high-carbon steel, chrome over nickel plate.
Cat. No.
PT-T03
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC no.
89195
Description
Snips only
www.greenlee.com
277
COMMUNICATIONs
Pro Wire Strippers
• Strips both solid and stranded wires.
• Precision ground blades ensure consistent stripping and cutting.
• Ergonomically designed, extra long handles for superior comfort
and assured grip.
• Heat treated for strength with black oxide finish for rust resistance.
• Serrated nose pliers for bending, pulling, and shaping wire.
• Lock tab protects cutting edges during storage.
• Cleanly cuts #6-32 and #8-32 screws.
• Note: this is not an insulated tool.
• Lifetime limited warranty. 1950A
1955A
CAP (AWG)
Cat. No.
1950A
1955A
1956A
UPC No.
06852
06857
10300
Description
solid
stranded
Pro Stripper 10-18 AWG
Pro Plus Wire Stripper, 10-18 AWG
Pro Plus Stripper 8-16 AWG
10-18
10-18
6-14
12-20
12-20
8-16
1956A
Wire Stripper/Cutters
• Strips both solid and stranded wires.
• Precision ground blades ensure consistent stripping and cutting.
• Double dipped grips for superior comfort and assured grip.
• Heat treated for strength with black oxide finish for rust resistance.
• Serrated nose pliers for bending, pulling, and shaping wire.
• Lock tab protects cutting edges during storage.
• Cleanly cuts #6-32 and #8-32 screws.
• Note: this is not an insulated tool.
• Lifetime limited warranty.
1916A
CAP (AWG)
Cat. No.
1916A
1917A
1917A
UPC No.
31891
31890
Description
solid
stranded
Wire Stripper
Wire Stripper
10-20
16-26
12-22
18-28
GripP-Strippers 10 & 20
• Head of tool and handles designed at optimum 22º angle to prevent
awkward wrist bends.
• Precision grould blades ensure consistent stripping and cutting.
• Features screw cutter and wire loops embedded in frames.
• Built-in safety lock.
• Gripping jaws on front of tool for pulling wire.
• PA1117 will work on Romex household cable.
• Note: This is not an insulated tool.
CAP (AWG)
Cat. No.
Description
solid
stranded
PA1117
PA1118
PA1123
GripP 10 cutter/stripper
GripP 20 cutter/stripper
Wire Stipper Bundle, includes both PA1117 and
PA1118
10-22
20-30
12-24
22-32
*Do not use on live circuits.
TRUSTED
278
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
stripax® Pro 6 & Pro 16
• Strips heavy-duty and industrial insulations including
THHN & THHW.
• Strips standard insulations including PVC, rubber and silicone.
• Provides nick-free stripping of insulation with no damage to conductors.
• Built-in cutter provides a smooth, straight cut without distorting
the conductor.
• Fine adjustment slider on top of tool lets you adjust to the
insulation thickness.
• Handles designed for comfort and require low hand force.
• Not for Teflon or Kapton hard insulations (use part number PA1115P
mini-stripax Plus with a Teflon blade for these insulations).
• Perfect companion for any of our wire ferrule crimpers.
• Strippers carry a lifetime warranty; blade warranty is one year
for defects only.
68 spring- compression
blades on Pro 6†
Adjustable wire stop to set
strip lengths
Cat. No.
Description
Weight
PA1113
PA2113
stripax® Pro 6 (28-10 AWG) (.08-6.0 mm2)
stripax® Pro 6 replacement stripping blade set
5.5 oz
*Do not use on live circuits
† 68 spring- compression blades precisely adjust to the insulation.
Teflon® is a registered trademark of Dupont
Cutter on bottom means less
hand force required
Round stripping blades on
Pro 16 cut insulation cleanly
mini-stripax® plus
• Strips flexible and solid conductors with PVC, Teflon, silicone and other
special insulations.
• Strips multiple conductors and thin ribbon-cable conductors
simultaneously.
• Adjustable wire stop and built-in wire cutter.
• 28-18 AWG (0.80-1.0 mm2) PVC blade included.
• See replacement blades in next section.
*Strips PVC only. Do not use on live circuits.
For Teflon, order blades separately see below in mini-stripax plus Replacement Blades Section.
Cat. No.
Description
Weight
PA1115P
mini-stripax plus (28-18 AWG)
4 oz
®
Teflon® is a registered trademark of Dupont
Adjustable Wire Stripper & Cutter
• Economical wire stripping tool for multiple cables.
• Made of high carbon steel and heat treated for long life.
• Adjustable settings for wire sizes from 30-10 AWG.
*Do not use on live circuits.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
weight
PA1161
Adjustable wire stripper & cutter (30-10 AWG)
3 oz
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
279
COMMUNICATIONs
Combo UTP/Coax SureStrip™
• Professional all-in-one cutter/stripper for coaxial and twisted pair cables.
• Cuts and strips multiple cable types:
– Coax: RG6, RG6 Quad and RG59.
– Twisted Pair (UTP/STP): Cat6, Cat5e and Cat5.
• Easy-to-use combination cutter/stripper.
• Adjustable stripping blade for UTP/STP;
accommodates different insulation thicknesses
without damaging conductors.
• Self-regulating cassette blade prevents nicks.
• Coax blade cassette is removable to adjust stripping depth of both blades with hex key included. (Note: Hex key stores securely in bottom of tool)
• Contoured finger grips for cutting power.
Cat. No.
Description
weight
PA1119
PA2119
PA2120
Combo UTP/Coax SureStrip™
Coax Blade Cassette
UTP Cut/Strip Blade
2.5 oz
—
—
Data SureStrip™
• Small, compact tool that cuts and strips multiple cable types:
– 4-, 6- and 8-conductor flat satin cables.
– 4-, 6- and 8-conductor UTP/STP data cables.
– 25-pair UTP/STP data and telephone cables.
• Multi-conductor round bundled cables with a
maximum diameter of .5” (12.7 mm).
• 14-8 AWG (2.5-75mm2) wire.
• Nylon reinforced ABS plastic with stainless steel blade.
• Fully adjustable with simple thumb screw.
• Self-regulating to prevent nicking.
• Contoured finger grips for power cutting.
TRUSTED
280
SINCE
1862
Cat. No.
Description
weight
PA1116
Data SureStrip™
2.5 oz
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
CST vario Stripper
• Most flexible coax stripping tool on the market.
• Easy to set up and adjust.
• Two- and three-level stripping.
• Minimum center-to-center strip length is 0.13” (3.2 mm).
• Maximum total strip length is 0.67” (17 mm).
• Adjustable blade positioning in 0.04” (1 mm) increments.
• Lifetime warranty on frame only.
PA3242
*Not recommended for use on LMR or Teflon cables.
Cat. No.
Description
PA3240
PA3242
CST vario stripper
Replacement blade holder, blades & allen hex key
Teflon® is a registered trademark of Dupont
PA3240
CST Strippers
• Fixed blade system that accommodates 0.1"-0.315" (2.5-8.0mm) cable
diameters including RG58/59/62AU, RG6, RG6 Quad, RG174,
Belden 1505A, 1855A and 8281.
• Cam adjustment ensures precise and repeatable hold on cable.
• Memory blocks reduce set-up time and are easy to interchange and mark
for various applications.
• Blades are two-sided for longer use.
• No cable jacket distortion during stripping process.
• Blade cassettes easy to change.
• Lifetime warranty on frame only.
Cat. No.
Description
COMMon uses
PA1240
PA2240
PA1243
PA2243
PA1247
PA2247
PA1248
PA2248
PA1250
PA2245
CST Green - 3 Level (A=.279, B=.201)
Green Blade Cassette only
CST Brown - 3 Level (A=.295, B=.137)
Brown Blade Cassette only
CST Orange - 3 Level (A=.327, B=.146)
Orange Blade Cassette only
CST Black - 3 Level (A=.344, B=.094)
Black Blade Cassette only
CST Frame only
CST Memory Cartridge only
Common 2- & 3-piece
Kings, Amphenol 3-piece
ADC, Amphenol HDTV
Y-block –
inserts into tool to tighten up
rollers for smaller cable sizes
PA2245
PA2240
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
PA2247
PA2248
www.greenlee.com
281
COMMUNICATIONs
CST Pro Coax Stripper
• New patent-pending coax stripping system for precision & accuracy
• Works with a wide range of cable diameters from .1”-.315” (2.5-8.0mm)
including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281
and mini-coax.
• Pre-set for standard 2- and 3-level strip lengths
• Coax stripper designed for pros requiring precision, versatility & ease of use.
• Reversible-rollers easily adjust for various cable sizes including mini-coax.
• Dual roller mechanism perfectly centers cable & applies equal pressure to
eliminate cable distortion.
• Quick-change pre-set blade cassettes.
• Cam adjustment ensures precise hold on cable.
• Fixed blade cassettes pre-set for standard 2- and 3-level strip lengths
• Interchangeable blades reduce set-up time.
• Lifetime warranty on frame only.
PA2284
Reversible Rollers
PA2282 3 Level
Blade Adjustment Screws
Cat. No.
Description
COMMon uses
PA1280
PA2280
PA1281
PA2281
PA1282
PA2282
PA1283
CST Pro Green 3-level (A=.279, B=.201)
Green Blade Cassette only
CST Pro Orange 3-level (A=.327, B=.146)
Orange Blade Cassette only
CST Pro Black 3-level (A=.344, B=.094)
Black Blade Cassette only
CST Pro Blue 2-level (A=.250)
Common 2- & 3-piece
PA2283
PA1285
PA2284
Blue Blade Cassette only
CST Pro Frame only
CST Pro Rollers only
Kings, Amphenol RFX 3-piece
ADC, Kings, Amphenol HDTV, Mini's
Standard RG6/6QS & RG59,
CATV "F", Mini's
LC CST Strippers
• Self-regulating tension.
• Adjust cutting depth on each blade for varying cable thicknesses with the
included hex key.
• Pre-set for common strip lengths.
• Blades adjust for strip dimensions other than our standard pre-set units*.
SPECIFICATIONS
PRESET STRIP LENGTHS* CABLE USAGE
LC CST-58/59
0.315” outer jacket
0.157” inner dielectric
0.315” outer jacket
0.157” inner dielectric
RG58, RG59, RG62 AU & RG6
LC CST CATV “F”
0.236” outer jacket
LC CST-Mini
0.344” outer jacket
0.094” inner dielectric
RG59, RG6 & RG6 QUAD CATV”F”
(preset for RG6 CATV “F”)
RG178, RG179, RG188, AT&T
735(A), NT735, Belden 1855A,
Belden 8218, RG180, RG187,
RG188A, RG405 and more
LC CST-11
Cat. No.
Description
PA1255
PA1256
PA1257
PA1258
PA2263
LC CST-58/59 – 2- & 3-Level, Adjustable
LC CST-11 – 2- & 3--Level, Adjustable
LC CST CATV "F" – 2-Level
LC CST-Mini
Replacement Blade
RG8, RG11 & RG213
*To adjust strip lengths simply change blade locations in the lower jaw to attain the following:
.157” (4 mm), .236” (6 mm), .315” (8 mm), .394” (10 mm) and .472” (12 mm)
Not recommended for use on LMR or Teflon cables.
Teflon® is a registered trademark of Dupont
TRUSTED
282
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Kwik Stripper Twisted Pair Stripper
• No tool is better for trimming the jacket from twisted pair cable
without damaging the individual conductors.
• Blade depth adjustment ensures precise cutting depth.
• Blade penetration controlled by tension loop.
• Strip length gauge.
Cat. No.
45579
UPC No.
45579
Description
Kwik Stripper Twisted Pair Stripper
45579
Typically used for Modular Plug Connectors (See pages 297)
Pro Kwik Stripper CATV
• Designed for the professional CATV cable installer. Uses reversible
stripping cartridges for RG6, RG59, RG11 and RG7 CATV cables that
are replaceable.
• No adjustments needed.
• Included with the tool, the RG6/RG59 cartridge strips
cable jacket and ­dielectric to 1/4" (6.4 mm).
• Included with the tool, the RG11/RG7 cartridge strips
cable jacket and ­dielectric to 1/4" (6.4 mm).
• Extra-large finger hole.
Cat. No.
45591
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC No.
01174
Description
Pro Kwik Stripper CATV
www.greenlee.com
283
COMMUNICATIONs
AM 25 Slitter
• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables.
• Adjustable cutting depth.
• Swivel blade for circular, longitudinal and spiral cuts.
• Spare blade in handle.
• Cable holding clip with integrated edge for removing slit insulation.
• Laser-trimmed, stainless-steel blade for long use.
• Slits PVC, Teflon and THHN.
• Perfect for armored cable.
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
Cat. No.
Description
PA1820
PA2109
AM 25
Replacement blade
Teflon® is a registered trademark of Dupont
AM 35 Slitter
• Strips and slits 1.0" to 1.4" (25-35mm) diameter Round Cables.
• Adjustable cutting depth for insulation up to 0.18” (4.5 mm) thick.
• Swivel blade for circular, longitudinal and spiral cuts.
• Spare blade in handle.
• Cable holding clip with integrated edge for removing slit insulation.
• Laser-trimmed, stainless-steel blade for long use.
• Slits PVC, Teflon and THHN.
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
Cat. No.
Description
PA1821
PA2109
AM 35
Replacement blade
Teflon® is a registered trademark of Dupont
Universal Slitter
• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables.
• Precision stripping and slitting of rubber, PVC, nylon and
most insulation materials.
• Adjustable depth of cut.
• Swivel blade for circular, longitudinal and spiral cuts.
• Cable is supported during use.
• Cable support arm edge is used to pry off thick insulation.
• Laser-trimmed, stainless-steel blade for long use.
• A perfect tool for mid-point taps.
• Spare blade included.
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
TRUSTED
284
SINCE
1862
Cat. No.
Description
PA1822
PA2109
Universal splitter
Replacement blade
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Pocket Cable Stripper
• Specifically designed for stripping power and telecommunications
cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm).
• Strips solid conductor, stranded conductor and multiple conductor
cables.
• Easy blade depth adjustment.
• Blade rotates for circular, longitudinal and spiral cuts.
cat. no.
1903
13544
13545
13546
upc no.
12679
13544
13545
13546
Description
Cable Stripping Tool
Replacement Blade (2 per package)
Replacement Small Hook
Replacement Large Hook
Cable TV “F” Flaring & Attachment Tool
• Flares RG59, RG6 and RG6 Quad Cable types.
• Works with CATV "F" connectors.
• Save time on cable TV and satellite installations.
• Flare the shield braid back from the dielectric without nicking your finger.
• Make connections faster and easier with properly prepped cable.
• Attachment tool enables you to hold the connector comfortably to insert
onto cable.
Cat. No.
Description
PA1927
Cable TV "F" Flaring & Attachment Tool
Coax 3-Way Tool
• Flares RG6 and RG6 Quad Cable types.
• Flares shield braid back from the dielectric without nicking your fingers.
• Attachment tool enables you to hold the connector comfortably to insert
connector onto cable.
• Extraction tool to assist in coupling connector to port or to assist in
uncoupling from port.
• Works with CATV "F" connectors.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
PA1928
Coax 3-Way Tool
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
285
COMMUNICATIONs
RG59/RG6/RG6 Quad Flaring Tool
• Works on RG59 and RG6/6 Quad cable.
• Flares shield away from center dielectric.
• Saves time on CATV and satellite installation
Cat. No.
Description
PA1917
RG59/6/6QS flaring tool
BNC and CATV “F” Extraction Tools
• Chrome finish.
• Comfortable driver-style plastic handle.
• 1908 CATV “F” is a combination tool. Use the hex socket to easily
remove and insert the connectors. Use the threaded end to hold the
connector while you insert cable for connectors. Helps to prevent finger
injuries.
PA1907
PA1908
PA1916
Cat. No.
Description
PA1908
PA1907
PA1916
CATV 8" (203 mm)
BNC 8" (203 mm)
BNC 12" (305 mm)
SealTite® ProM Coax Crimper
• Crimps weatherproof linear CATV “F”, BNC, RCA & right- angle
compression-type connectors from all manufacturers.
• Works with RG6, RG6 Quad, RG59 & RG62AU coax cables.
• Versatile tool - accommodates multiple connectors.
• The only tool with a single, reversible head eliminating need for adapters.
• No additional parts, attachments or other tools required to change from
one crimp style to another.
• Quickly & easily adjust crimp height.
• Once properly set, lock with adjustment lock.
• Rated life cycle 30,000 (unloaded).
TRUSTED
286
SINCE
1862
Cat. No.
Description
PA1559
SealTite® ProM Coax Crimper
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
RG59/6Q-7/11 Pro Coax Compression Tool
• Versatile tool crimps RG59, RG6, RG6 Quad , RG 7/11, BNC and RCA
Compression Connectors
• Cable holder rotates to accommodate different connector sizes
• Adjustable Crimp length accommodates most manufacturers' connectors
• Once adjusted, no additional parts or adapters are needed to change from
one crimp style to another.
Cat. No.
Description
PA70020
RG59/6Q-7/11 Pro Coax Compression Tool
SealTite® 59/6 CATV “F” Compression Crimper
• Performs compression crimping of waterproof CATV “F” connectors for
RG59 and RG6/RG6 Quad 75 ohm coaxial cables.
• Works on Augat/T&B Snap-N-Seal™ connectors, AIM CATV “F” waterproof
connectors and Paladin SealTite™ connectors.
• Fully ratcheting one-cycle crimp function.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
PA901024
SealTite® Crimper
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
287
COMMUNICATIONs
SealTite® Cable TV “F” Compression Connectors
• Large hex nut for easy installations.
• Patented design with 360º cable gripping sleeve.
• Solid brass construction with nickel plating to prevent UV degradation.
RG59
Description
SealTite® RCA Compression Connectors
Cat. No.
RG6 &
RG6 Quad RG6 Quad
Cat. No.
10 Pack Clamshell
PA9642
PA9643
20 Pack Clamshell
PA9610
PA9611
50 Pack Jar
PA9645
PA9646
100 Pack Bulk
N/A
PA9614*
*Also available in retail jar pack, PA9687.
Cat. No.
PA9644
PA9612
PA9647
PA9615
• Patented design with 360º cable gripping sleeve.
• Full gold contacts for low signal loss.
• Includes slip-on color bands for easy cable identification.
• A set of bands includes 4 red, 2 green, 2 blue, 2 yellow
and 2 white per ten connectors.
• Constructed from solid brass with nickel plating.
RG59
RG6 &
RG6 Quad
Description
Cat. No.
Cat. No.
10 Pack Clamshell
50 Pack Jar
PA9720
PA9721
PA9714
PA9716
SealTite® BNC Compression Connectors
• Patented design with 360º cable gripping sleeve.
• Full gold contacts for low signal loss.
• Includes slip-on color bands for easy cable identification.
• A set of bands includes 4 red, 2 green, 2 blue, 2 yellow
and 2 white per ten connectors.
• Constructed from solid brass with nickel plating.
RG59
RG6 &
RG6 Quad
Description
Cat. No.
Cat. No.
10 Pack Clamshell
PA9730
PA9715
50 Pack Jar
PA9731
PA9740
Hex Crimp Cable TV “F” Connectors
• Crimp-on style cable TV “F” connectors.
• All-brass with nickel plating for durability.
• Designed for indoor use.
RG59
RG6
Description
Cat. No.
Cat. No.
Cat. No.
10 Pack Clamshell
PA9676
PA9677
PA9678
RG6 Quad
Twist-On Cable TV “F” Connectors
• Connectors twist onto cable for quick installation.
• Sharp threads firmly grip cable for good connections.
• EZ-SPIN™ hex nut for easy installation.
TRUSTED
288
SINCE
1862
USA
RG59
RG6
Description
Cat. No.
Cat. No.
10 Pack Clamshell
PA9694
PA9695
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Push-On Cable TV “F” Connectors
• No crimp tool required. Simply strip cable and push connector onto it.
• Special knurled nut offers superior grip for strong connection.
• All brass, nickel-plated for durability and low signal loss.
• For indoor usage only.
RG6
RG59
Description
Cat. No.
Cat. No.
10 Pack Clamshell
PA9682
PA9683
Other Coaxial Connectors
Connect CATV “F” cables to RCA plugs.
• Eliminate the need for new cabling
• Solid brass with nickel plate
• 75 ohm rating
PA9719
PA901074
Cat. No.
Description
PA9719
A901074
Adapter, CATV “F” (female) to RCA (male) (Qty. 10)
Adapter, CATV “F” (female) to BNC (male) (Qty.1)
Dual Port Ground Block
• Provides a positive ground connection between two coaxial shields
and the ground wire.
• Creates a connection for the dissipation of any unwanted electrical
charges.
• Solid nickel plated zinc alloy.
• High-performance, 360º contact, for up to 3.0 GHz.
• Suitable for satellite or cable TV.
• UL/CSA approved.
Cable TV “F” Terminators
Cat. No.
Description
PA9675
Dual Port Grounding Block
• Solid brass body with nickel plating.
• ½ watt resistor (5% tolerance); 75 ohm.
Cat. No.
Description
PA9686
CATV "F" Terminators (10)
Female Splice Adapter
• Cable TV “F” female-to-female barrel adapter.
• Designed for performance up to 3.0 GHz.
• Gold-plated contacts.
• 2 pack.
Cat. No.
Description
PA9675
Female Splice Adapter
BNC Coaxial Adapter
• Precision manufactured from machined brass and nickel plated
for ­corrosion resistance.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
45728
BNC Straight Jack to Jack (1)
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
289
COMMUNICATIONs
Cable TV Splitters
• Split analog and digital cable TV signals to 2 to 4 outlets.
• HDTV compatible and works with cable modems.
• 75 ohm impedence.
• 5-1000 MHz bandwith.
• “F”-style female ports.
PA9688
PA9689
Cat. No.
Description
PA9688
PA9689
PA9690
2-Way Cable TV Splitter
3-Way Cable TV Splitter
4-Way Cable TV Splitter
PA9690
Satellite TV Splitters
• Split satellite and digital signals to multiple outlets.
• Compatible with most digital satellite brands, digital cable TV and HDTV.
• 75 ohm impedence.
• 5-2400 MHz bandwith.
• “F”-style female ports.
PA9669
PA9670
Cat. No.
Description
PA9669
PA9670
PA9671
2-Way Satellite TV Splitter
3-Way Satellite TV Splitter
4-Way Satellite TV Splitter
PA9671
Satellite Diplexer
• Combines signal from satellite dish and UHF/VHF antenna into single coax
cable output.
• 5-860 MHz antenna and 950-2450 satellite power pass.
• For RG6 or RG6 Quad.
• An additional diplexer can be used to split signals again for connection to
satellite and antenna ports on receivers.
• Diplexed signals can be distributed through an amplifier to send signal to
multiple outlets.
Cat. No.
Description
PA9673
Satellite Diplexer
In-Line Amplifier
• Boost signals to multiple outlets or on long cable runs.
• Works with satellite dish or terrestrial antenna installations with over 50’ of
cable.
• Digital TV ready.
• 20 dB gain.
• DC 12-18V.
• 950-2400 MHz maximum bandwidth.
TRUSTED
290
SINCE
1862
Cat. No.
Description
PA9672
In-Line Amplifier
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
SurePunch® Pro Punchdown Tool
• Terminate cable in single punch - including 23 AWG Cat6.
• Detachable light with long-life LED specially designed to focus the
light on the panel work area.
• Luminous intesity of the LED is 2200 mcd.
• Finger grips and non-slip rubber-embedded cushioned handle
for comfort.
• Multi-use spudger that can be used as a screwdriver or an IDC
contact insertion tool.
• Hook to feed wires through holes.
• Pick to separate bonded twisted-pair cables or to strip insulation and
cut wire.
• Adjustable HI/LO spring compression for all cable types.
LO= 27.5 lbs (122 N), HI= 37.5 lbs (167 N)
• Uses twist-and-lock style blades.
• Blade storage area in end of handle with comfortable latch cover.
Cat. No.
PA3590
PA3584
PA3587
PA3588
PA3596
PA3597
PA3598
PA3599
PA3589
PA3585
PA3586
PA3591
PA3592
PA3593
PA3594
PA3595
PA4599
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
Description
Tools with lights
SurePunch Pro PDT handle (no blade) and light
SurePunch Pro PDT with Double 110 blade and light
SurePunch Pro PDT with 110 & 66 reversible cut & punch/punch-only
blades and light
SurePunch Pro PDT with 1110/66 combination cut-only
blade and light
SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade
and light
SurePunch Pro PDT with 66 reversible cut & punch/punch-only blade
and light
SurePunch Pro PDT with BIX™ cut-only (scissors type)
blade and light
SurePunch Pro PDT with Krone® LSA cut-only (scissors type) blade and
light
Tools without lights
SurePunch Pro PDT handle (no blade)
SurePunch Pro PDT with Double 110 blade
SurePunch Pro PDT with 110 & 66 reversible cut & punch/punch-only
blades
SurePunch Pro PDT with 1110/66 combination cut-only blade
SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade
SurePunch Pro PDT with 66 reversible cut & punch/
punch-only blade
SurePunch Pro PDT with BIX™ cut-only (scissors type) blade
SurePunch Pro PDT with Krone® LSA cut-only
(scissors type) blade
SurePunch Pro PDT detachable light and batteries
www.greenlee.com
291
COMMUNICATIONs
SurePunch® Punchdown Tools
• Cushion grip, molded to the shape of your hand, for comfort and a
sure, non-slip hold.
• Increased HI/LO impact force to meet demands of new cable types
and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N).
• For 28-22 AWG (0.08 - 0.34 mm2), solid or stranded wire.
• Uses twist-and-lock style blades.
• Cushioned heel for comfort in the palm of your hand.
• New latch cover blade storage area in end of handle.
• Lanyard holes in end.
PA4591 PA4573 PA6514 PA4571 PA4574 PA4572
PA4575
Cat. No.
Description
PA3570
PA3571
PA3572
PA3573
PA3574
PA3575
PA3576
PA3579
SurePunch PDT handle (no blade)
SurePunch PDT with 110/66 combination cut-only blade
SurePunch PDT with 110 reversible cut & punch/punch-only blade
SurePunch PDT with 66 reversible cut & punch/punch-only blade
SurePunch PDT with BIX™ cut-only (scissors type) blade
SurePunch PDT with Krone® :SA (scissors type) blade
SurePunch PDT with Double - 110 blade
SurePunch PDT with both 110 and 66 reversible cut & punch/punch-only
blades
SurePunch 110/66 combination cut-only blade
SurePunch 110 reversible blade
SurePunch 66 reversible blade
SurePunch BIX™ cut-only blade
SurePunch Krone® LSA cut-only blade
SurePunch Double - 110 blade
Telephone Unwrap Bit
Telephone Wrap Bit
PA4571
PA4572
PA4573
PA4574
PA4575
PA4591
PA6514
PA6515
PA6515
Impact Punchdown Tools
• For 28-24 AWG Solid or Stranded conductor.
• Standard impact compression design.
• Adjustable HI/LO settings for compression force.
• Impact force: HI= 35 lbs. (110 N), LO= 25 lbs. (155 N).
• Reversible clip-in blades (except BIX & Krone).
• Punches down with or without cut function
(except BIX & Krone).
• Spare blade stores in handle of tool (except BIX & Krone).
• Impact handle and blades available separately.
• Leather holster available to attach to belt.
PA3528
PA4527
PA4528
PA4529
PA4530
TRUSTED
292
SINCE
1862
PA4531
USA
Cat. No.
Description
PA3526
PA3527
PA3528
PA4527
PA4528
PA4531
Impact punchdown (tool handle only)
Impact punchdown w/66 blade
Impact punchdown w/110 blade
Replacement 66 blade
Replacement 110 blade
Replacement Krone®-type blade
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Punchdown Tool
• Inserts wire for a corrosion-resistant termination and trims off excess
wire.
• Terminates 66, 110, BIX and Krone cross-connect and wall jacks.
• Spring-loaded for fast, low-effort wire seating and termination.
• Internal impact mechanism eliminates jamming for longer, trouble-free
service life.
• Adjustable low- and high-impact force settings.
• Bayonet-style blade locking mechanism.
• Neoprene pad for shock absorption.
• Spare blade storage in the handle.
• Color-coded yellow on the cut side of tool.
Cat. No.
46020
46021
46023
46022
46024
46025
46023
UPC No.
46020
46021
46023
46022
46024
46025
Description
Punchdown Tool Only
Punchdown Tool w/66 Blade
Punchdown Tool w/110 Blade
66 Style Blade
110 Style Blade
BIX Style Blade
ProPunch™ 110 Multi-pair Punchdown
Terminates and cuts up to five pairs of data/voice cable at the same time!
We designed it to perform over 30,000 cycle punches and to terminate most
23 AWG cable pairs in one punch! This tool delivers more than one and a
half times the force of other multi-punchdown tools on the market today. The
rugged “no-slip” handle fits comfortably in your hand with the handle end
contoured to the heel of your hand.
• Fewer punches saves time.
• Smooth operation and rugged, comfortable handle absorbs punch recoil.
• Terminates 28-22 AWG (.08 - .34 mm2) solid or stranded wires with single
insulation.
• Cut and punch blade cassette or switch blades for punch only.
• Designed to work with 23 AWG CAT 6 cable.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
PA3560
PA3561
PA4560
PA4561
PA4562
PA4563
ProPunch 110 with 5-pair head
ProPunch 110 with 4-pair head
Replacement 5-pair head
Replacement 4-pair head
Replacement 5-pair blade cassette
Replacement 4-pair blade cassette
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
293
COMMUNICATIONs
Non-Impact Punchdown Tools with Fixed Blades
• Non-impact, low-cost punchdown tools for 110, 66 & BIX.
• Works with 28-22 AWG (.08 - .5 mm2).
• Solid or stranded, single insulation wire.
• Comfortable rubber handle grip.
• Performs both cut and punch functions.
• Perfect for small jobs and the do-it-yourself installer.
• Fits in the palm of your hand.
• Typically lower in cost than replacement blades for punchdown tools.
PA3580
PA3581
PA3582
Cat. No.
Description
weight
PA3580
PA3581
PA3582
110 Punchdown Tool
66 Punchdown Tool
BIX™ Punchdown Tool
3 oz
3 oz
3 oz
Punchdown Stripper
• Self-regulating strip depth.
• Fast and easy to use.
• Great for CAT-5, CAT-5e, and CAT-6 data cable.
• Built-in 110 punchdown (punch only).
Cat. No.
Description
weight
PA1913
Punchdown stripper
2 oz
Pocket Probe Pick
Probe pick for pulling wire, slicing, stripping cable and cleaning debris off terminal
panels. Small and lightweight—pen-sized with clip for carrying in pocket.
• Spudger tip.
• Wire hook.
• Wire stripper and slitting tooth.
• Non-conductive scraping tip.
open
Cat. No.
Description
weight
PA1915
Pocket probe pick
3 oz
closed
Can Wrench
• Strips PVC insulation.
• Strips outer jacket of AWG 22/4 and 24/4 telephone cable.
• Strips insulation of AWG 22 (.34 mm2) and AWG 24 (.20 mm2) wire.
• 3/8” (9.5 mm) and 7/16” (11 mm) hex sockets for accessing panels.
• Durable shock-resistant design.
TRUSTED
294
SINCE
1862
Cat. No.
Description: Heavy Duty Keystone Tip-
weight
PA1900
Can Wrench
5 oz
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Jack Terminator
• High-grade, hardened steel frame offers superior performance and
durability.
• Ratcheted action to ensure proper, consistent termination.
• Adjustment feature for extra leverage applications.
• Quick-change punch sets require no tools.
• Removable jack cradle allows for alternate lacing option.
• Punch heads can be purchased separately.
• Rubber-embedded handles provide extra comfort.
• For use with Modular Jacks listed below including CommScope®
(Systimax®, Uniprise®), Leviton®, OCC®, HellermannTyton®,
Hubbell®Premise Wiring and Legrand® (Ortronics®).
• Lifetime Warranty (crimper frame only).
Specifications
Specifications
Pa8100
General Jack Terminator™ With
Punch Down Head-Set
General Punchdown
Head-Set
General Punch Head Only
Length
Height
Width
Weight
9.6” (245 mm)
3.25” (80 mm)
1.25” (32 mm)
1.25 lbs (575 g)
9.75” (248 mm)
4” (102 mm)
1.25” (32 mm)
1.4 lbs (652 g)
1.6” (40 mm )
4” (102 mm)
1.25” (32 mm)
2 oz (54 g)
1” (26 mm)
2.1” (55 mm)
1.25” (32 mm)
0.8 oz (23 g)
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
Cat. No.
DESCRIPTION
Jack compability
PA8100
PA8105
PA3711
PA3811
PA8106
PA3712
PA3812
PA8107
PA3713
PA3813
PA8108
PA3714
PA3814
PA8109
PA3715
PA3815
PA8110
PA3716
PA3816
PA8111
PA3717
PA3817
PA8112
PA3718
PA3818
Jack Terminator™ Crimper Frame
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Punchdown Head Set not Included
Systimax® - MPS100E, Uniprise® UNJ600/500
Systimax® - MPS100E, Uniprise® UNJ600/500
Systimax® - MPS100E, Uniprise® UNJ600/500
Systimax® - MGS400, MGS500, MGS600
Systimax® - MGS400, MGS500, MGS600
Systimax® - MGS400, MGS500, MGS600
Leviton® - 41106, 41108, 5G108
Leviton® - 41106, 41108, 5G108
Leviton® - 41106, 41108, 5G108
Leviton® - 61110, 5G110, 6110G
Leviton® - 61110, 5G110, 6110G
Leviton® - 61110, 5G110, 6110G
OCC® - KMJA5E, KMJA6, K6A
OCC® - KMJA5E, KMJA6, K6A
OCC® - KMJA5E, KMJA6, K6A
HellermannTyton® - RJ45FC5E, RJ45FC6
HellermannTyton® - RJ45FC5E, RJ45FC6
HellermannTyton® - RJ45FC5E, RJ45FC6
Hubbell® - HXJ Series
Hubbell® - HXJ Series
Hubbell® - HXJ Series
Ortronics® - TJ5E00, TJ600, TJ610
Ortronics® - TJ5E00, TJ600, TJ610
Ortronics® - TJ5E00, TJ600, TJ610
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
295
COMMUNICATIONs
All-in-One UTP Snagless Crimper
• Cuts and strips round or flat cable.
• All metal construction.
• Cushion grips for improved comfort and control.
• For standard and "snagless" RJ45 connectors.
• Also crimps RJ11/22 and RJ22 WE/SS style plugs.
Cat. No.
Description
PA1561
All-in-One UTP Snagless Crimper
All-in-One Ultra Telephone Tools
• 4 crimp functions with a single tool without changing dies.
• Crimps 4-position RJ22 handset.
• Crimps 4- and 6-position RJ11/RJ12 connectors.
• Crimps 8-position RJ45 (non-keyed).
• Embedded cable cutter and stripper.
• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables
• Advanced ratchet system.
• Precision die-cast aluminum head.
• Crimps 6-position RJ11-DEC offset type connectors (P/N 901014).
PA901014
Cat. No.
Description
PA901014
PA901016
PA2530
All-in-One Ultra Telephone Tool AMP (Tyco)
All-in-One Ultra Telephone Tool (WE/SS)
Replacement blade kit
All-in-One Pro Telephone Tools
• Crimps 4-position RJ22 connectors.
• Crimps 4- and 6-position RJ11/RJ12 connectors.
• Crimps 8-position RJ45 (non-keyed) connectors.
• Embedded cable cutter and stripper.
• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables.
• Comfortable rubber-embedded handles.
• Built-in safety ratchet release.
PA1530R
TRUSTED
296
SINCE
1862
Cat. No.
Description
PA1540
PA1530R
PA2530
All-in-One Pro Telephone Tool AMP (Tyco)
All-in-One Pro Telephone Tool (WE/SS)
Replacement blade kit
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Telephone Ratchet Crimper
• Combination tool terminates 8-position, 6-position and 4-position (45575
only) modular style plugs.
•  No need to change crimping dies.
•  Full-cycle ratchet mechanism provides consistent,
quality terminations every cycle.
•  Straight action ensures uniform crimp.
•  Small, compact design.
•  Built-in wire cutter and stripper for flat cable.
•  All-steel frame has rust-resistant, black oxide finish.
45553
Cat. No.
Typically used for Modular Plug Connectors
(See page 297).
45553
45575
UPC No.
Description
45553
45575
Telephone Ratchet Crimper
Telephone Ratchet Crimper
45575
Typically used for Modular Plug Connectors
(See page 297). Our Telephone Ratchet
Crimper was designed with a compact head to
fit into tight spaces and ergonomic ­handles for
operator comfort.
Modular Plug Connectors
RJ45
• RJ45 8-conductor modular plugs.
• 50 micron gold plating.
• Meets or exceeds EIA/TIA
specifications.
RJ45
RJ11
• RJ11 6-conductor modular plugs.
• For use with stranded wire.
• 50 micron gold plating.
WE/SS-style 8P8C Connectors
SNAGLESS
connector type
cable type
quantity
Cat. No.
RJ45
Cat5e, Solid or Stranded
Round, Flat or Oval
10/Pack
50/Pack
100/Pack
PA9546
PA9655
PA9549
RJ45
Cat3, Stranded, Round
10/Pack
PA9521
SNAGLESS Connectors
connector type
cable type
RJ45
Solid or Stranded
Round, Flat or Oval
quantity
10/Pack
40/Pack
Cat. No.
PA9588
PA9589
RJ11
WE/SS-style 6P6C Connectors
description
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
connector type
cable type
RJ11
Solid or Stranded
Round, Flat or Oval
PHONE +1.815.397.7070
FAX +1.815.397.9247
quantity
10/Pack
Cat. No.
PA9520
www.greenlee.com
297
COMMUNICATIONs
CrimpALL® 8000 Series Crimpers
• Ultra-smooth, fully ratcheting crimp cycle with built-in safety release.
• Interchangeable die sets of heat-treated steel for long life.
• Soft, rubber-embedded handles.
• Long-lasting tool that delivers over 50,000 crimp cycles.
• Rugged, double-plated jaw design to increase life span.
• Lifetime warranty on tool; one-year on die sets.
• Angled head to prevent awkward wrist bending during operation.
• Reduced handle grip distance makes it easy for both small and large hands.
• Higher crimp force produced with less hand force so hand doesn’t
tire as quickly.
• No breakover hand force – the effort required by most crimpers to make the
last click at the end of the cycle to complete the crimp – the CrimpALL
does the work.
• Manufactured using the newest fine blanking technologies.
• EZI-Change™ die screws make changing dies quick and easy – no
screwdriver required.
Cat. No.
Description
PA8000
PA2303
PA2306
CrimpALL® tool frame
Replacement EZI-Change™ die screws (2)
Replacement fixed die screws (2)
1300 Series Crimpers
• Fully-ratcheting cycle with built-in safety release.
• Interchangeable die sets of heat-treated steel for long life.
• Easy to use and maintain.
• Available as complete tool with die set inserted or separate tool frame and
individual die sets.
• Foam-lined case available to hold frame and 6 die sets together.
• Lifetime warranty on tool; one-year on die sets.
• EZI-Change™ die screws make changing dies quick and easy –
no screwdriver required.
• Most precise and tightest tolerances on die sets in the industry.
• Six ratchet gear settings for optimum crimp performance.
TRUSTED
298
SINCE
1862
Cat. No.
Description
PA1302
PA2303
PA2306
PA901013
PA2346
Crimp tool frame
Replacement EZI-Change™ die screws (2)
Replacement fixed die screws (2)
1300 crimp case
Replacement Spring
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
CrimpALL® Interchangeable Die Sets for Coaxial Connectors
description
Cat. No.
Cat. No.
cable type
connection
CRIMP SIZES
Tool with die die only
remarks
RG58, RG59,
RG62AU
BNC/TNC and 3 Piece
0.256" (6.5mm, 0.213" (5.4mm),
0.068" (1.7mm) HEX
PA8001
PA1317
PA2034
Common 2-piece and 3-piece BNC/
TNC
RG174, RG59/62,
mini-coaxial 75-ohm
HDTV SMA, True 75-ohm
BNC/TNC, Mini-UHF
0.255" (6.5mm), 0.197"
(5.0mm), 0.178" (4.5mm),
0.068" (1.7mm) HEX & 0.042"
(1.0mm) SQ
PA8002
PA1366
PA2648
Common 2-piece and 3-piece BNC/
TNC (Kings, ADC, Amphenol, etc.)
RG59, RG6, Belden
8281, Belden 1694A
HDTV BNC/TNC/CATV "f"
True 75-ohm
0.324" (8.2mm), 0.255"
(6.5mm), 0.068" (1.7mm) HEX
& 0.052" (1.3mm), 0.042"
(1.0mm) SQ
PA8003
PA1367
PA2649
Common 2-piece and 3-piece BNC/
TNC (Kings, ADC, Amphenol, etc.)
RG6, Belden 1694,
Bleden 1694A
HDTV BNC/TNC True 75ohm
0.278" (7.0mm), 0.275"
(6.9mm), 0.068" (1.7mm) HEX &
0.042" (1.0mm) SQ
PA8004
PA1368
PA2657
Common 3-piece BNC/TNC (Kings &
ADC HDTV)
RG58, Mini-59, RG174, small coaxial
SMA, SMB, Mini-59 BNC/
TNC,
Mini-UHF
0.128" (3.2mm), 0.213"
(5.4mm), 0.197" (5.0mm), 0.178"
(4.5mm), 0.068" (1.7mm) HEX &
0.042"(1.0mm) SQ
PA8005
PA1363
PA2653
Common 2-piece and 3-piece SMA/
SMB/BNC/TNC & Mini-UHF
RG58, RG174, AT&T
735, 50 and 75-ohm
Thinnet, BNC/TNC, MiniUHF
0.213" (5.4mm), 0.178" (4.5mm)
0.068" (1.7mm) HEX & 0.042"
(1.0mm) SQ
PA8006
PA1335
PA2046
50/75 ohm small 2-piece & 3-piece
BNC/TNC (Kings, ADC, etc.)
RG59, RG62, Belden
8281, 50 and 75ohm
BNC/TNC and Mini-UHF
0.315" (8.0mm), 0.252"
(6.4mm), 0.068" (1.7mm), HEX
0.042" (1.0mm) SQ
PA8007
PA1336
PA2047
75 ohm 2-piece & 3-piece BNC/TNC
(Kings, ADC, Amphenol, etc.)
RG174, RG179 and
Small Cable
Connection
BNC/TNC
0.178" (4.5mm), 0.128" (3.2mm),
0.068" (1.7mm) HEX
PA8008
PA1338
PA2051
Common 2-piece and 3-piece BNC/
TNC/SMA/SMB
RG58, RG59,
RG62AU,
RG6 Teflon/Plenum
BNC/TNC
0.325" (8.2mm), 0.215"
(5.46mm), 0.065" (1.7mm) HEX
PA8009
PA1347
PA2075
2-piece and 3-piece BNC/TNC AIM/
Cambridge
RG6, RG58
BNC/TNC
0.320" (8.13mm), 0.210"
(5.33mm), 0.185" (4.7mm) HEX
PA8010
PA1348
PA2076
2-piece BNC/TNC AIM/Cambridge,
Kings, Amphenol
Belden 1694A, Belen
1695A
BNC/TNC
0.315" (8.0mm), 0.68" (1.7mm)
HEX
PA8011
PA1349
PA2082
Common 2-piece and 3-piece BNC/
TNC
RG6 and RG6 Quad,
Belden 1694A
BNC and CATV "F" Type
& HDTV
0.360" (9.1mm), 0.324"
(8.2mm), 0.068" (1.7mm) HEX
PA8012
PA1356
PA2045
Common 2-piece and 3-piece BNC/
TNC and CATV "F" 2-piece
RG59, RG6 Video
Cable
CATV "F" Type
0.346" (8.8mm)m 0.319"
(8.2mm), 0.256" (6.5mm) HEX
PA8013
PA1328
PA2042
Crimps Ferrules or Sleeves Only
RG8, RG11, RG213
N-Type
0.429" (10.9mm), 0.100"
(2.54mm), 0.080" (2.03mm) HEX
PA8014
PA1365
PA2656
Common 2-piece and 3-piece "N"Type (Kings, ADC, Amphenol, etc.)
RG8, RG11, RG213,
RG216
N-Type, MS39012 Type
0.415" (10.5mm), 0.095"
(2.4mm) HEX
PA8015
PA1319
PA2039
Crimps Pins and Ferrules
RG8, RG213
BNC/TNC
0.402" (10.2mm), 0.094"
(2.4mm), 0.079" (2.0mm) HEX
PA8016
PA1337
PA2050
Common 2-piece and 3-piece BNC/
TNC
Belden 1855A,
1865A, 1505A,
1505F, 1694A,
1694F, 179DT
HDYV BNC/TNC True 75ohm
0.178" (4.5mm), 0.255"
(6.5mm), 0.278" (7.0mm),
0.068" (1.7mm), 0.041" (1.0)
HEX
PA8049
PA1389
PA2699
Kings, ADC, B&L, Trompeter,
Amphenol, Switchcraft
Teflon® is a registered trademark of Dupont
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
299
COMMUNICATIONs
CrimpALL® Interchangeable Die Sets for Modular Plugs
description
Cat. No.
Cat. No.
cable type
connection
CRIMP SIZES
RJ45 - 8P8C (8 Pin)
Flat/Round, Solid/Stranded
RJ45 Unkeyed WE and SS
Tool with die die only
PA8030
PA1307
PA2061
Western Electric (WE)/Stewart
Connector (SS)
RJ11 & RJ12 - 6P6C,
6P4C, 6P2C
Flat/Round, Solid/Stranded
RJ11 & RJ12 Unkeyed WE
and SS
PA8031
PA1340
PA2062
Western Electric (WE)/Stewart
Connector (SS)
RJ22 Handset - 4P4C
(4 Pin)
Flat/Round, Solid/Stranded
4 Pin Handset WE and SS
PA8032
PA2063
Western Electric (WE)/Stewart
Connector (SS)
RJ45 - 8P8C (8 Pin)
Flat/Round, Solid/Stranded
RJ45 Unkeyed AMP
PA8033
PA1342
PA2064
AMP (Tyco) Inc. Connectors Only
RJ11 & RJ12 (6P6C,
6P4C, 6P2C
Flat/Round, Solid/Stranded
RJ11 & RJ12 Unkeyed AMP
PA8034
PA2065
AMP (Tyco) Inc. Connectors Only
RJ11 DEC-MMJ
OFFSET-6P6C
Flat/Round, Solid/Stranded
RJ11 DEC/MMJ OFFSET
PA8035
PA1344
PA2067
AMP (Tyco) Inc. Connectors Only
RJ50 - 10P10C (10 Pin)
Flat/Round, Solid/Stranded
RJ50 Unkeyed WE and SS
PA8036
PA1345
PA2068
Virginia Plastics (VP)
British Telecom 6 Pole
Plug
Flat/Round, Solid/Stranded
BT 6 Pole
PA2032
British Telecom Plugs Only
RJ45, Hirose
Connectors, Short Body
Rounded, Shielded (STP)
RJ45 STP Hirose Connectors,
Short Body
PA2672
Hirose
RJ45, Molex Connectors
for 5.0 dia. Cable
5.0mm Dia. Round,
Shielded (STP)
RJ45 STP Molex Connectors,
5.0mm dia. cable
PA2673
Molex
RJ45, AMP/Molex
Connectors for dia.
Cable
6.0mm Dia. Round,
Shielded (STP)
RJ45 STP AMP & Molex,
6.0mm dia. cable
PA2674
AMP (Tyco) Inc. & Molex
PA1373
remarks
CrimpALL® Interchangeable Die Sets for Specialty Crimpers
description
Cat. No.
cable type
connection
CRIMP SIZES
Tool with die die only
remarks
RJ45 WE/SS &
RG6/RG6 Quad CATV
"F"
UTP 4-Pair & RG6/
RG6 Quad
RJ45 WE/SS 8-pin &
0.360" (9.1mm) HEX/0.324"
(8.2mm) HEX
PA8045
PA1387
For standard RJ45 WE/SS Modular
Plugs & 1-piece RG6/RG6 Quad
CATV "F" conns.
TRUSTED
300
Cat. No.
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PA2687
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
CrimpALL® Interchangeable Die Sets for Insulated Terminal Crimpers
description
Cat. No.
CRIMP SIZES
Cat. No.
cable type
Insulated Terminals
and Lugs
connection
Solid or Stranded Wire,
22-10 AWG (.34 - 6
mm2)
12-10 (Yellow), 16-14 (Blue),
22-18 (Red), (6-4 / 2.5 - 1.5 /
.34 - .75 mm2)
Tool with die die only
PA8021
PA2035
PA1305
remarks
For Large Professional Terminals
(Panduit, T & B, etc.)
Insulated Terminals
and Lugs
Solid or Stranded Wire,
22-12 AWG (.34 - 4
mm2)
12-10 (Yellow), 16-14 (Blue),
22-18 (Red), (4/1.5 - 2.5 / .34
- .75 mm2)
PA8022
PA1308
PA2040
For Standard Commercial Terminals
(Hardware Store Brands)
Insulated Terminals
and Lugs
Solid or Stranded Wire,
26-14 AWG (.10 - 2.5
mm2)
16-14 (Blue), 22-18 (Red),
22-26 (Yellow) (1.5 - 2.5 / .34 .75 / .34 - .10 mm2)
PA8023
PA1334
PA2029
For Smaller Wire Barrel Terminals
CrimpALL® Interchangeable Die Sets for Non-Insulated Terminal Crimpers
description
Cat. No.
Cat. No.
cable type
connection
CRIMP SIZES
Tool with die die only
remarks
Non-Insulated
Terminals and
Lugs
Solid or Stranded Wire,
22-8 AWG (.34 - .10
mm2)
10-8 / 14-12 / 18-16 / 22-20
(6 - 10 / 2.5 - 4 / .75 - 1.5 /
.34 - .50 mm2)
PA8024
PA1322
For Standard Commercial Terminals
PA2031
CrimpALL® Interchangeable Die Sets for Open Barrel, Box and Terminal Systems
description
cable type
Open Barrel NonInsulated Terminals,
Narrow Lugs and
Power Contacts
Open Barrel NonInsulated Terminals,
Wide Lugs and Power
Contacts
Open Barrel D-Sub
Contact Pins RS-232
Cat. No.
connection
Solid or Stranded Wire,
22-10 AWG (.34 - 6
mm2), F Type*
CRIMP SIZES
22-18 / 16-14 / 12-10
(.34 - .75 / 1.5 - 2.5 /
4-6 mm2)
Cat. No.
Tool with die die only
PA8026
PA2033
PA1306
remarks
For Standard Commercial Terminals
Solid or Stranded Wire,
22-14 AWG (.34 - 2.5
mm2), F Type*
16-14 / 22-18
(1.5 - 2.5 / .34 - .75 mm2)
PA8027
PA2096
For Standard Commercial Terminals
Solid or Stranded Wire,
28-20 AWG (.08 - .50
mm2), F Type*
28-24 / 22-20
(.08 - .2 / .34 - .5 mm2)
PA8029
PA1359
PA2097
For Standard D-sub Pins Only; not for
HD D-subs
CrimpALL® Interchangeable Die Sets for Wire Ferrules
description
USA
Cat. No.
Cat. No.
cable type
connection
CRIMP SIZES
Tool with die die only
remarks
Insulated & NonInsulated Wire
Ferruls
Solid or Stranded Wire,
22-10 AWG (.34 - 6
mm2)
22-20 / 18-16 / 14-12 / 10
(.34 - .55 / .75 - 1.5 / 2.5 4 / 6 mm2)
PA8025
PA1360
For DIN or US Type
Wire Ferrules
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
PA2095
www.greenlee.com
301
COMMUNICATIONs
D-sub Indent Crimpers
• Adjustable Pin Height Locator
• Cushion Grips for comfort.
Cat. No.
Description
PA1460
PA1461
PA1462
D-sub 4 Indent Crimper 26-20 AWG
D-sub 4 Indent Crimper 20-12 AWG
D-sub 8 Indent Crimper 26-20 AWG
Electrical Terminal Crimper
• D-sub Pins & Sockets 26-28 AWG.
• Butt-Insulated Connectors 22-26 AWG.
• Telephone Piercing Spade Lugs 22-26 AWG.
• Open Barrel Connectors 14-18, 20-22 AWG.
Cat. No.
Description
PA1176
Multi-Purpose Electrical Terminal Crimper
EDAC/ELCO Crimper
Crimp tool for broadcast professionals terminating loose 28-18 AWG
(.08-75 mm2) EDAC and ELCO rack and panel open barrel contacts.
• Crimps EDAC pins 516-290-590 & 516-290-591 along with ELCO pins
000-60-8017-03-13
• Embedded pin locators properly align pins to ensure accurate, reliable
crimping
• Fully-ratcheted to prevent under crimping
• Requires low hand force and provides superior crimp force
• True ergonomic design for extreme comfort and performance
• Non-slip, soft rubber handles
• Double-plated for extended long-life and crimping accuracy
• Factory-calibrated and set for precision
Pin locators
SPECIFICATIONS
Weight
TRUSTED
302
SINCE
1862
19 oz. (538 g)
Cat. No.
Description
PA1670
EDAC/ELCO Crimper
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Open Barrel Contact Pin Crimper
Professional crimping tool for open-barrel box and round connector contacts
with a wire range of 30-18AWG (0.05-.75 mm2)
• Precision fixed dual-plate dies for crimp accuracy
• Crimps non-insulated terminal lugs, cable lugs and parallel and serial
splices or “F-Type”
• Works with Molex, Waldom & Leoco-type connectors
• Durable steel construction for long life
• Rubber-embedded ergonomic handles for low-effort operation
SPECIFICATIONS
Weight
Range
14 oz. (400 g)
Small: 30-24 AWG (0.05-.20 mm2)
Medium: 22-18 AWG (.34-.75 mm2)
Cat. No.
Description
PA1645
Open Barrel Contact Pin Crimper
Open Barrel Contact Pin Crimper
Professional crimping tool for open-barrel box and round connector
contacts with a wire range of 24-14 AWG (0.2-2.5 mm2)
• Precision fixed dual-plate dies for crimp accuracy
• Built-in locator
• Crimps non-insulated terminal lugs, cable lugs and parallel and
serial splices or “F-Type”
• Works with Molex, Waldom & Leoco-type connectors
• Durable steel construction for long life
• Rubber-embedded ergonomic handles for low-effort operation
SPECIFICATIONS
Weight
Range
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
14 oz. (400 g)
Small: 24-22 AWG (0.05-.20 mm2)
Medium: 18-14 AWG (.34-.75 mm2)
Cat. No.
Description
PA1631
Open Barrel Contact Pin Crimper
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
303
COMMUNICATIONs
Kwik Cycle® 9" Crimp Frame
• Used to manually crimp a wide variety of connectors
and terminals to factory specifications.
• Frame features a precision full-cycle ratchet for accurate,
repeatable crimps every cycle.
• Crimp release lever improves throughput by eliminating rejected
­terminations due to improper connector positioning.
• Frame features a tension adjustment preset at the factory
for optimum performance.
• High-leverage force and ergonomically-designed handle provides
­comfortable use.
• Frame and dies are manufactured from heat-treated, hardened tool steel
for superior function and long life.
• All die sets are easily interchangeable with a simple screwdriver.
Cat. No.
45504
UPC No.
45504
Description
Kwik Cycle 9" Crimp Frame
45504
See our comprehensive line of connectors on pages 288-297.
Kwik Cycle® 9" Interchangeable Die Sets for Insulated & Non-Insulated Terminals
description
Connection
22-10 AWG
UPC NO.
Cat. No.
UPC no.
Features
Tool with die
die only
Color Coded nests for easy identification
Standard insulated terminals, ring tongue,
spade lug, slide on and but splices
45500
45500
45509
45509
22-10 AWG
Color Coded nests for easy identification
for fully insulated slide-on style connectors
AMP UltrafastTM style
45501
45501
45570
45570
26-16 AWG
For mini insulated terminals with smaller wire
barrels. RIng tongue, spade, slide on and butt
splices
45565
45565
45507
45507
For non-insulated terminals and splices
22-8 AWG
TRUSTED
304
Cat. No.
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
45505
PHONE 866.384.8813
FAX 800.524.2853
45505
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Heat Gun
• Electronic variable heat control ranging from 250-1100º F (120-590º C).
• Two speeds: high & low.
• Double insulation safeguards injury from possible electrical failure inside
gun.
• Comfortable, lightweight design reduces operator fatigue.
• Three nozzles included: window nozzle, deflection nozzle and .47” (12 mm)
focusing nozzle.
• UL listed.
SPECIFICATIONS
Power reqs.
Current draw
Power cons.
120VAC 60 Hz
7.5 amps max.
1200 watts max.
Cat. No.
Description
PA1873
Heat gun
Desoldering Tools
• Removes solder with simple push-button operation.
• Standard (regular & anti-static) replacement tips available.
• Repair kits come complete with replacement spring and suction rods.
• Durable metal frame.
Cat. No.
Description: Desoldering Tools
PA1700
PA2712
Desoldering tool (standard)
Standard replacement tip
Cable Tie Gun
• For use with plastic cable ties up to 0.25” (6.35 mm) in width.
• Neatly fastens and cuts in one action.
• Adjustable tension for changing cable bundle pressure.
• Automatic cable tie cut off.
Cat. No.
Description
PA1828-1
Cable tie gun
Note: Leaves 1 mm tab of lock after cut is made.
Kwik Cycle® Cable Tie Guns
• Tension adjustment allows the user to adapt the tool to the size of the tie.
• Automatic cut-off eliminates sharp edges on ties.
Cat. No.
45306
45300
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC No.
45306
45300
Description
Standard Cable Tie Gun
Heavy-Duty Cable Tie Gun
www.greenlee.com
305
COMMUNICATIONs
HDMI TOOLS
A product video is
available, scan this QR
code or visit:
HDMI®* HDFT™ Termination Tool
www.youtube.com/GreenleeDEMO
• Use with Greenlee 24 AWG HDFT Cable & Connectors.
• Terminates cable using HDFT™ connectors and trims excess wire in one
step.
• Ratcheted handles for uniform, complete crimping cycle.
• Interchangeable crimping die sets.
• Includes 8000 Series Frame, HDFT™ Die Set and HDFT™ Assembly Fixture.
®
™
Cat No.
UPC NO.
PA8700
PA4002
00097
00096
Description
Termination Tool with metal loading fixtures
Metal Loading Fixture (for use in PA8700 Termination Tool)
HDMI®* HDFT™ Cable Prep Tool
• Use with Greenlee® 24 AWG HDFT™ cable & connectors.
• Cuts 24 AWG HDFT™ cables, strips outer jacket and twisted pair shielding.
• Curved blade for cutting HDMI®* and HDFT™ cables.
• Precision stripping cavity for removing outer jacket on 24 AWG HDFT™ cables.
• Exclusive cavity for removing twisted pair shielding on 24 AWG HDFT™ cables.
Cat No.
UPC NO.
Description
PA1192
00072
Cable Prep Tool
24 AWG HDMI®* Field Terminating Cable
• Use with Greenlee® HDFT™ Connectors.
• Make premium HDMI®* High Speed with Ethernet cables.
• Supports HDMI®* 1.4 features: 3D, Ethernet and Audio Return.
• 100’ 24 AWG HDFT™ cable.
• Solid-core long grain copper.
• Fifth twisted pair for Ethernet and audio return.
• Other HDMI®* 1.4** features supported: 10.2 Gbps Data Rate, 3D Video
Formats, Deep Color and 4k x 2k Resolution.
Cat No.
FTHD24-100
UPC NO.
00079
Description
100' 24 AWG Field Terminating Cable
HDMI®* Field Terminating Connectors
• Make custom length, premium HDMI®* cables.
• Eliminates cable clutter.
• Costs less than pre-terminated cables.
• 10 or 50 pack – 24 AWG HDFT™ Connector Components.
• Use With Greenlee® 24 AWG HDMI®* Field Terminating Cable only.
• Includes main connector terminal block and wire guides.
• Guides are mated and colorcoded for 24 AWG HDMI®* Field Terminating cable.
• Make custom length, premium HDMI®* High Speed with Ethernet cables.
Cat No.
HDCN24-10
HDCN24-50
UPC NO.
00073
00074
Description
Field Terminating Connectors (10 Pack)
Field Terminating Connectors (50 Pack)
*HDMI Equivalent
HDMI®* Registered trademark of HDMI Licensing, LLC
™
HDFT Trademark owned by the Quest Group
TRUSTED
306
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
HDFT™ Pro Deluxe Kit
• Make custom length, premium HDMI®* cables.
• Eliminates cable clutter.
• Costs less than pre-terminated cables.
14 Piece Kit Includes:
1) PA1192 HDMI®* HDFT™ Cable Prep Tool
(1) PA8700 HDMI®* HDFT™ Termination Tool
(10) HDCN24-10 HDMI®* Field Terminating Connectors
(1) PA1175 Media Cable Cutter
(1) TC-30 Deluxe Carrying Case
Cat No.
UPC NO.
PA4017
00099
Description
Pro Deluxe Kit
HDFT™ Pro Kit
12 Piece Kit Includes:
(1) PA1192 HDMI®* HDFT™ Cable Prep Tool
(1) PA8700 HDMI®* HDFT™ Termination Tool
(10) HDCN24-10 HDMI®* Field Terminating Connectors
Cat No.
UPC NO.
PA4019
00101
Description
Pro Kit
Pro HDMI® Cable Tester
• 14 LED readout for easy checking.
• Sweep function checks for crossed wires.
• 9V battery included.
Cat No.
UPC NO.
Description
PA1599
00075
Pro Cable Tester
HDFT™ Die Set
• Precision cast 4140 steel for durability.
• High tensile steel cutting blades for long life.
• Error-proof design avoids misalignment.
Cat No.
UPC NO.
PA4003
00098
Description
Die Set
*HDMI Equivalent
HDMI®* Registered trademark of HDMI Licensing, LLC
HDFT™ Trademark owned by the Quest Group
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
307
COMMUNICATIONs
WIRE & CABLE IDENTIFICATION
Classic 77 Series Tone Generators
Features / SPECIFICATIONS
77HP-G
77HP-G/6A
77M-G
Selectable Warble Tone
Continuity Testing
Polarity Testing
Talk Battery Supply
Two-line Modular Test Lead (RJ-11)
Three-color LED (identifies AC ring voltage)
Weather-Resistant Design
Bent Nose Clips with Bed-of-Nails Penetrator
RJ11 & RJ45 socket
Lanyard
Battery Operated (9V not included)
✔
LED & Beeper
✔
✔
✔
✔
✔
✔
LED & Beeper
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
LED
✔
✔
✔
✔
✔
✔
✔
✔
77HP-G
77M-G
77HP-G/6A
Classic 77 Series Tone Generators
Permits technicians to identify the conductor within a bundle, at a crossconnect point or at the remote end. Can be used on twisted pair wiring
(telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC
wiring and most other wiring.
Cat. No.
UPC No.
Description
77HP-G
77HP-G/6A
77M-G
49991
49992
49993
77H-GP Tone Generator
77HP-G/6A Tone Generator (ABN clips)
77M-G Tone Generator (basic)
Note: Not for use on energized AC wiring
Cat. No.
UPC No.
Description
77CS
08686
Leather Belt Holster for Classic 77 Series
Tone Generators
77HP-G
77CS
Replacement Piercing Clips
• These traditional telco-style clips can be used with almost any style
cordsets.
• Clips feature bent nose design for use on 66 style punchdown blocks and
bed-of-nails penetrator for use on insulated wires.
• Package of two clips with red and black boots.
Cat. No.
RPC
TRUSTED
308
SINCE
1862
USA
UPC No.
08710
PHONE 800.435.0786
FAX 800.451.2632
Description
Piercing Clips
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Station Master Pro
• Troubleshoot irrigation systems.
• Activate and cycle solenoids.
• Test solenoids for continuity.
• Send tone to identify wires.
• Measure clock voltage.
• Low battery indication.
• Easy-to-understand LEDs.
• Test leads with Bed-of-Nails and piercing Pin Clips.
• 1-year limited warranty.
SPECIFICATIONS
Minimum Voltage for Clock LED
(LED intensity increases as voltage increases)
Minimum B attery while Testing
Maximum Input Voltage between Test Leads
Solenoid Circuit Recharge Time
Maximum Distance Range to Activate one Solenoid
Power Source
Battery Life
Operating/Storage Temp.
Cat. No.
24B
UPC No.
86786
15 VAC
10.5 VDC
28 VAC
2.5 seconds
12 AWG Loop 3000-13000 feet
14 AWG Loop 2000-8500 feet
18 AWG Loop 500-3000 feet
9V alkaline batteries
3 hours continuous
32°F - 122°F (0° - 50°C)
Description
Station Master Pro
Station Master Pro Kit
• Troubleshoot irrigation systems.
• Chatter mode for audible locating of valves.
• Activate any 24V AC valve solenoid.
• Test solenoids for continuity.
• Send tone to identify wires.
• Check clock AC voltage.
• Low battery indication.
• Easy-to-understand LEDs.
• Test leads with 'bed-of-nails' and piercing pin plips.
• Tracing valve wiring.
• Locates underground solenoids.
SPECIFICATIONS
Minimum voltage for clock LED
Minimum battery while testing
Maximum input voltage between test leads:
Solenoid activate output voltage:
Battery:
Operating/storage temperature:
Relative humidity (max):
Cat. No.
24BK
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC No.
86787
15 V AC
10.5 V DC
28 V AC
27 to 18 V AC
2 - 9V Alkaline batteries
32°F to 122°F (0°C to 50°C)
80%
Description
Station Master Pro Kit
www.greenlee.com
309
COMMUNICATIONs
Professional GX Series Tone Generators
77GX
• Microprocessor controlled circuitry for increased reliability.
• Two-line polarity indication for fast outlet identification.
• Automatic shutoff to prevent battery drain.
• Snag-proof boot prevents broken plug tabs.
• Convenient wrist/hanging lanyard.
• Three distinct, selectable tone signal outputs for multiple
line identification.
• Two selectable tone power outputs for use on open and shorted pairs.
• Independent continuity test function.
• Independent talk battery supply with higher output voltage.
• Fixed alligator clips and removable modular plug for multiple
connection options.
• 77GX2 includes premium telco-style bent nose clips with piercing pin and
bed-of-nails connectors.
Cat. No.
77GX
77GX2
UPC No.
60556
60560
Description
77GX Tone Generator
77GX2 Tone Generator
Note: Not for use on energized AC wiring
AdapToner Modular Breakout Tone Generator
• The AT8 Tone Generator makes it simple to test continuity, polarity,
send tone and even supply talk battery to any configuration of pairs in
8-position ­modular jacks and plugs.
• Combines the features of our tone generators and a modular breakout
adapter.
• In-line testing is made simple with both a modular plug and jack on each
unit.
• 8-position “snag-proof” modular plug.
• 8-position jack with protective cover.
• Quick reference guide with common wiring configurations.
• Selectable solid/warble tone signal.
• Tone, continuity and talk battery supply using alligator clips.
• Weather-resistant design.
• Battery operated (9V not included).
Cat. No.
AT8
UPC No.
08693
Description
AdapToner Modular Breakout Tone Generator
Note: Not for use on energized AC wiring
TRUSTED
310
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
LAN Toner with HUB Blink and Detect
• The LAN Toner is designed for the network installation and maintenance
professional and can be used on any wiring system including datacom,
telecom, security/alarm, audio and CATV.
• Blinks HUB, Switch Port, and PC activity lights for fast identification.
• Detect LAN hubs & switches.
• Provides tone signaling, continuity testing and telephone line polarity
­indication combined with a modular breakout adapter.
• Selectable tone outputs for identifying multiple cable runs.
• Includes multiple connection options.
Cat. No.
AT8L
UPC No.
60583
Description
LAN Toner
Note: Not for use on energized AC wiring
Tone Test Set
• Our most comprehensive tone test set.
• Traditional alternating tone signal for wire identification.
• Audible line condition testing (level) indicates dead,
working and off-hook lines.
• Line 1 and 2 polarity testing using 4-conductor modular plug.
• Improved talk battery supply for communication over inactive pairs.
• Tone and test functions using either modular plug or 24" alligator clip
leads.
• Audible resistance level measurement.
• Audible capacitance level measurement.
• Battery operated (9V not included).
Cat. No.
600LS
UPC No.
08680
Description
Tone Test Set
Note: Not for use on energized AC wiring
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
311
COMMUNICATIONs
Alarm Loop Verifier/Tone Generator
• Designed specifically for the security and alarm industry, the PE620 can
be connected to a Normally Open or Normally Closed loop pair
and provides a distinct audible tone when the alarm condition occurs.
• Latching feature provides a simple method for identifying intermittent
­failures (“swingers”) and confirming operation of switches at
remote ­locations.
• In the latching mode, the unit will catch the alarm condition
and continue sounding until the tester is reset.
• As a tone generator, the unit provides a traditional variable tone that
can be applied using the 24" red and black test leads or a convenient
6-position modular plug.
• Convenient magnetic back plate allows the PE620 to be mounted directly
to the control panel cabinet or door.
• Battery operated (9V not included).
Cat. No.
PE620
UPC No.
08665
Description
Alarm Loop Verifier/Tone Generator
Note: Not for use on energized AC wiring
Data Mate® Precision Tracing Tone Generator
• Trace wire or cable without interfering with digital two-way cable
or ADSL services.
• The model 7780 Data Mate Precision Tone Generator is intended to
provide tone for tracing and troubleshooting communication circuits
without
disrupting digital traffic on the line or adjacent lines.
• The high purity of the tracing tones combined with internal isolating filters
allows safe tracing on circuits that carry digital services above the
baseband
(two-way cable and ADSL).
• The high-power differential output of the 7780 makes tones easy to find,
even over long distances. Also useful for continuity testing and polarity
­testing, the 7780 provides the standard warble tone and talk battery
supply.
• Two-way Broadband Compatible.
• High Power Tone Output.
• Modular and Telco Pro Alligator
• Line Voltage and Polarity
Leads.
Indication.
• ADSL Service Compatible.
• High Purity Tone Signal.
• Long Range.
• Low Crosstalk.
• Popular, Standard Warble Tone
• Low Battery Indicator.
Frequencies Continuity Testing
• Filter-isolated Circuitry.
• Compatible with existing tone.
SPECIFICATIONS
Electrical
Output Power Output Signal Frequency
Output Impedence
Mechanical
Length 5.5" (140 mm)
Width 2.25" (57 mm)
Cat. No.
UPC No.
PE7780
60777
+9dBm
577/982 Hz alternating
3,500 ohms minimum, 25kHz to 1.1 MHz
Depth 1.0" (25 mm)
Weight 0.38 lbs. (0.17 kg)
Description
Data Mate Tone Generator
Note: Not for use on energized AC wiring
TRUSTED
312
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Tone Probes Selection Guide
model no.
Powerful 2" Rear-fire Speaker
One-button Operation
Adjustable Volume Control
LED for Visual Signal Strength Indication
Recessed Tabs for Telephone Test or Headset Connection
Headset Jack (audio shock protected)
LED Flashlight
Noise Filtration
Replaceable Tip
Five-Minute Auto Shutoff
Low-battery Indicator
Battery Operated (9V not included)
Water Resistant
"Mains Power" Warning (acAlert™)
Patented
200B-G
200EP-G
200GX
200FP
200XP
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
500XP
✔
Two-Button
✔
✔
✔
✔
✔
✔
✔
200B-G
✔
200EP-G
Tough & Water Resistant Multi-Filter Tone Probe
200GX
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
200FP
✔
✔
✔
✔
✔
✔
✔
✔
200XP
500XP
• Water resistant (floats) and tough, combined with all the very best digital signal
processing filtering 500XP will help identify signals buried in the worst of noise.
• Cancels all 50 and 60 Hz "mains" harmonics and homes in on key 577 Hz and
983 Hz frequencies if needed.
• Simple two-button operation with dual signal strength indicating LEDs can work
with any tone generator.
• Headset allows discrete use in quiet environments and can help in acoustiacally
noisy areas.
• acAlert™ helps warn users if brought near hazardous ac power voltages which
may be inaudible if using the advanced filtering.
Tone Probe Amplifiers
200C
200EP-G
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
UPC No.
500XP
500XPB
HS001
01125
01085
01126
Description
500XP Pair Tracing Probe (POS)
500XP Pair Tracing Probe (Boxed)
Replacement Headset
• Used in conjunction with any tone generator, Tone Probe Amplifiers permit wire
and cable identification without having to make direct metallic contact with the
conductor.
• All models feature a powerful speaker for noisy environments,
recessed on/off button control and high gain for accurate wire identification in
congested cable bundles and equipment rooms.
• The 200B-G also includes adjustable volume control for precise identification.
• The 200GX also includes an LED for visual signal strength indication and
recessed telephone test set connectors.
• The 200EP-G also includes a headset jack (audio shock protected) and an LED
Flashlight for working safely behind furniture, inside racks or in dim lighting
conditions.
Cat. No.
UPC No.
200B-G
200GX
200EP-G
200C
49986
60557
49987
08670
PHONE +1.815.397.7070
FAX +1.815.397.9247
Description
Tone Probe, Basic
Tone Probe, Standard
Tone Probe, Standard, with Headset Jack & Flashlight
Leather Belt Holster for 200 Series Tone Probe Amplifiers
www.greenlee.com
313
COMMUNICATIONs
Filter Tone Probe
• By selectively filtering out 60Hz (or 50Hz) and its harmonics, the 200FP
can be used with any tone generator for faster, more accurate,
cable and wire ­identification.
• Slim, comfortable design for use in limited-space areas.
• Recessed on/off push-button control to conserve battery life.
• Adjustable sensitivity/volume control to increase accuracy.
• Blended carbon/plastic tip to reduce the risk of shorting terminals.
• Patented.
Cat. No.
UPC No.
200FP
200FP/50
08672
60467
Description
Filter Tone Probe (60Hz mains)
Filter Tone Probe (50Hz mains)
Multi-Filter Tone Probe
• Single button selects between default mode and two kinds of
powerful noise filters.
• Filtering means faster, more accurate pair tracing.
• Digital signal processor for accuracy and sensitivity.
• Durable, light weight.
• Audible and visible signal detection.
• Continuous, wide-range volume control.
• Butt set terminals.
• Field replaceable tip, spare tip included.
• Uses a single 9 V battery.
• One probe for many applications.
• Works with any tone generator.
• The narrowband filter mode is especially well suited for 577Hz Telco tone
sources and a version is available for 1kHz systems (983Hz).
Cat. No.
UPC No.
200XP
200XP/50
60887
60888
Description
Multi-Filter Tone Probe (60Hz mains, 577Hz narrowband)
Multi-Filter Tone Probe (50Hz mains, 983Hz narrowband)
Replacement Plastic Tips for 200 Series Probes
• Plastic tips perform much the same as traditional metal tips while
reducing the risk of shorting terminals.
• Specially formulated with a carbon powder and carbon fiber
blended plastic.
• Tips fit 200B, 200EP, 200GX, 200FP and 200XP probes.
• RPT-1 comes with two pencil-style tips and two spade-style tips.
RPT-2
Cat. No.
RPT-1
RPT-2
UPC No.
08711
60561
Description
Plastic Tips for 200B, 200EP, 200FP and 200XP
Plastic Tips for 200GX
RPT-1
Replacement Metal Tips for 200B and 200EP Probes
• Metal tips provide maximum performance when probing insulated wires
or making direct metallic contact.
• Made of nickel-plated brass.
• Tips fit 200B and 200EP probes.
• Package contains two pencil-style tips.
Cat. No.
RMT-1
TRUSTED
314
SINCE
1862
USA
UPC No.
08709
PHONE 800.435.0786
FAX 800.451.2632
Description
Metal Tips for 200B and 200EP Probes
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
Precision Tone Generator
• Used in the telecommunications industry for pair identification and fault
locating.
• Supplies a precise 577.5Hz crystal controlled signal frequency.
• Variable output allows technicians to adjust signal strength to suit field
conditions and improve accuracy.
• Designed to work with any common amplifier and exploring coil for
aerial fault locating.
• For communications over inactive pairs, the unit supplies talk battery to
power two telephone test sets (buttsets).
• Each of the three test leads is equipped with traditional bent nose ­piercing
clips with “bed-of-nails” insulation piercing pins.
• The tone generator and test leads fit neatly in a durable, protective woven
polyester carrying case with shoulder strap.
• Battery-operated (1 – 6V lantern included).
Cat. No.
UPC No.
177
08657
Description
Precision Tone Generator
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter Frequency
Output Voltage
Output Signal Level
Construction
Dimensions
Weight
Load Coil Detector
One 6V lantern battery
40 hours nominal
577.5Hz pulsed at 1Hz, crystal controlled
0.1 to 80Vp-p
0 to +30dBm
High impact ABS plastic in woven polyester case
7.25" x 5.5" x 4.5" in case
3 lbs. with battery
• Designed for the telecommunications market, the 88 Load Coil Detector will
identify the presence and count the number of load coils on an active or
­inactive circuit.
• No complicated screens or test instructions to decipher.
• Designed to withstand the rigors of daily use, the tester speeds trouble­shooting
dedicated data circuits. Simply connect the test leads and turn the switch.
• While gradually turning the control, the display will “kick” to signify each coil
detected on the pair.
• Accurately identifies and counts up to four load coils on the circuit under test.
SPECIFICATIONS
Cat. No.
88
UPC No.
08656
Power Requirements
Battery Life
Construction
Dimensions
Weight
Description
Load Coil Detector
One 9V battery
100 hours nominal
High impact ABS plastic
4 x 2.25 x 1.5"
5.8 oz. with battery
T-Bug® Digital Signal Identifier
Cat. No.
0134-0500
USA
UPC No.
60764
PHONE 800.435.0786
FAX 800.451.2632
• Used to detect digital signals on twisted pair cables, identify and isolate ­digital
pairs for special handling and help technicians avoid accidentally putting pairs
out of service.
• Operation is non-invasive and does not involve metallic contact so there’s
no risk of service interruption.
• Simple to use – just place the probe between the pairs in question.
• Differential amplifier saves time by allowing the technician to determine
whether the signal is truly present or is an induced signal from adjacent pairs.
• False readings due to noise are virtually eliminated.
• Continuous self test ensures that the unit is functioning properly.
•  Emits both visible and audible indication when digital signals are present.
• Patented.
Description
T-Bug® Digital Signal Identifier
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
315
COMMUNICATIONs
Classic Tone and Probe Kits
• 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP
Tone Probe Amplifier in a rugged, woven nylon carrying case (700C).
• 601K-G Kit is a more basic version of the 701K-G kit, and includes the
77M-G Tone Generator and the 200B-G Tone Probe amplifier in a zippered
nylon pouch.
Cat. No.
701K-G
UPC No.
601K-G
701K-G
701K-G/6A
Description
49989
49990
35775
Classic Tone and Probe Kit, Basic
Classic Tone and Probe Kit, Standard
Classic Tone and Probe Kit, Standard with ABN clips
Premium Tone and Probe Kit
• Designed for more accurate wire identification, the 801K virtually
eliminates power-related noise from the tone and probe operation.
• Kit includes the 77HP/6A High Power Tone Generator and 200 FP Filter
Probe in a convenient Cordura® case (700C).
Cat. No.
UPC No.
801K
801K/50
08690
60466
Description
Premium Tone and Probe Kit
Premium Tone and Probe Kit (50Hz)
Xpert Tone and Probe Kit
• The Xpert Tone and Pobe Kit includes the 77GX (or 77GX2) Tone Generator
and 200XP Multi-Filter Tone Probe Amplifier in a rugged, woven nylong
carrying case.
• Especially suited for tracing in noisy environments.
Cat. No.
UPC No.
811K
811K/6A-BOX
36001
26375
Description
Tone and Probe Kit, Xpert
Tone and Probe Kit, Xpert with ABN clips
AdapToner Kit
• Designed for fast, accurate wire identification by combining the features
of our tone generators and modular breakout adapter.
•  Kit includes the AT8 Modular Breakout Tone Generator and 200EP
Inductive Amplifier in a convenient carrying case (700C).
Cat. No.
AT8K
TRUSTED
316
SINCE
1862
USA
UPC No.
08694
PHONE 800.435.0786
FAX 800.451.2632
Description
AdapToner Kit
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
802K Digital LAN Tracing Kit
• The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting
and tracing solution for LANs and other types of VDV wiring. The industry
standard 200FP filter probe (60Hz) is designed to eliminate hum from
fluorescent lights and AC power wiring that can obscure tracing tones.
• The AT8L LAN Toner not only generates multiple tracing tones
and provides basic wiring tests, but indicates the presence of
10/100Base-T network service.
Cat. No.
802K
UPC No.
36000
Description
Digital LAN Tracing Kit
LAN Toner Kit
• Designed for the network installation and maintenance professional,
the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity
lights for fast identification. This kit can be used on any wiring system
including Datacom, Telecom, security/alarm, audio and CATV.
• Kit includes the AT8L LAN Toner and the 200GX Inductive Amplifier
in a rugged, woven nylon carrying case (700C).
Cat. No.
AT8LK
UPC No.
60584
Description
LAN Toner Kit
CATV Cable Tone Test Kit
• Designed specifically for the CATV industry, this kit allows you to tone through
splitters, directional couplers and traps.
• Simple to use, the 402K provides accurate results and will eliminate long
delays trying to figure out non-tagged or mis-tagged cable drops.
• Kit includes one transmitter, one receiver, one male F-to-F connector adapter
cable, one male F-to-alligator clip adapter cable and a carrying case (700C).
• Transmitter and receiver are equipped with female F-connectors.
• Three methods of signal reception: electrostatic pickup for non-terminated
cables, electromagnetic pickup for terminated or shorted cables and direct
connection when identifying in the presence of passive devices.
• In continuity mode, provides both audible tone and LED display.
• Identifies the presence of AC or DC voltage on the cable under test.
• Four selectable tone outputs for multiple line identification.
Cat. No.
402K
402T
402R
CS9
CS19
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC No.
08677
60376
60377
60374
60378
Description
CATV Cable Tone Test Set
Transmitter
Receiver
Male to male F-connector adapter cable
F-connector to alligator clip
www.greenlee.com
317
COMMUNICATIONs
Security and Alarm Kit
• Designed specifically for the security and alarm industry, the 620K
provides a simple method for identifying intermittent failures (swingers)
and ­confirming operation of switches at remote locations.
• To better satisfy industry requirements, we’ve combined the Model PE620
Tone Generator with the popular Model 200EP Inductive Amplifier
in a durable woven nylon pouch (700C).
Cat. No.
620K
UPC No.
08682
Description
Security and Alarm Kit
Tone and Probe Plus Cable-Check™
RJ45 LAN Tester
• True cable mapping function identifies:
–
Good connection, opens, shorts and crosses.
–
Connector and cable pin-out.
–
Clear LED display for each pin and shield.
–
Shielded RJ45 modular plug socket.
• Automatic display of mapping with dual speeds: slow or fast.
• Tests RJ11 and RJ45 cables with runs up to 600’.
• Check polarity of telephone line.
• View telephone line status: dial tone, ringing or busy line.
• Provides talk power for telephone lines and butt set use.
• Selectable dual/single tone application for balanced and
unbalanced circuits.
• Four tone generator patterns.
• Test continuity of wires, cables and loads.
• Tone generator features auto-off function.
• Jack for headset.
• Audible speaker with adjustable volume control.
TRUSTED
318
SINCE
1862
Cat. No.
Description
PA1573
Tone & Probe Plus Cable-Check Kit
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
Cabling Pouch
• Designed to hold a complete set of wiring tools including: any (one)
77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a
punchdown tool, a cabling knife and scissors.
• Convenient loop to hold most telephone test sets.
• Removable “parts pouch” allows you to keep small components
in reach.
• Made of a durable woven nylon.
• Fits belts up to 5" wide.
Cat. No.
750C
UPC No.
08685
Description
Cabling Pouch
Tone and Probe Carrying Case
• Allows you to build your own kit using any tone generator
and 200 Series probe.
•  Durable woven nylon.
•  Fits belts up to 3" wide.
Cat. No.
700C
711CS
UPC No.
08683
60559
Description
Tone and Probe Carrying Case
Tone and Probe Carrying Case with belt hook
700C
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
319
COMMUNICATIONs
STRUCTURED WIRING TESTERS
NETcat® Pro 2 NC-500
• Test and troubleshoot telephone, data and coax wiring.
• NETcat Pro 2 Additional Features:
– Gigabit device capability detection (still detects 10baseT and 100baseT too).
– Cable type, velocity of propagation library, user editable.
– Power over Ethernet (PoE) detection.
– Memo pad.
• Detect split pairs, short circuits, broken and crossed wires.
• Step TDR technology shows length to open or short of all pairs.
• Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.
• Test patch cords and remote jacks.
• Touch-screen control, included stylus slots into main unit.
• Large icons ensure easy use with your finger too.
• Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is
highly visible in dark or brightly lit areas.
• Remote test and ID unit stores in base of main unit.
• Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory
kit along with carrying case).
• Tone generator with four selectable precision frequency tones, compatible with
Greenlee advanced digital signal processing probes.
• Operates on single 9V battery with low battery indication.
NC-500
SPECIFICATIONS
NC-510
(NC-500 not included)
NC-500 Contents:
• NETcat Pro 2 main unit with stylus
• Removable remote jack and patch lead test and ID unit
• Twisted-pair (modular RJ45), coax (F) and alligator clip
test cords
• 9V alkaline battery
NC-510 NETcat Pro 2 Accessory Kit Contents:
• Seven additional remote jack test and ID units,
RJ45 and F (male)
• Carrying case to hold additional remote test ID units
and content of NC-500 main kit
TRUSTED
320
SINCE
1862
Dimensions
Weight
Power
Requirements
User Interface
3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm)
0.45 lb. (200 g)
9V Alkaline battery (PP3)
Environmental
Operating
Temperature
Storage
-20°C to 70°C
Temperature
RJ45 shielded jacks
F-type threaded female coaxial connectors
User selectable based on a known cable length.
40% to 100% in steps of 1%
0 to 2000 ft. 1 ft. (0.3 m)
±4% or 2 ft. (0.6 m) whichever is greater
Interface
Connections
TDR
Calibration
TDR Range
Resolution
Accuracy to
Open/Short
Remote
Identifier
Wiremap
Display LCD
Viewing Area
Backlight
Buttons
2000 ft. (609.6 meters) maximum distance
358 ft (100 meters) maximum distance
Cat. No.
UPC No.
NC-500
NC-510
23639
23640
USA
Dot Pixels: 128 x 128 dots
60.0 x 58.4
White LED
LCD touch-screen, Single
momentary contact push button
0°C to 50°C
Description
NETcat Pro 2 Digital VDV Wiring Troubleshooter
NETcat Pro 2 Accessory Kit w/carry case
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
NETcat® Micro NC-100
• Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial
cables.
• TIA/EIA standard wiring pair verification.
• Detects shorts, opens, reversed polarity, crossed and split pairs.
• Generates three distinct, selectable digital tone patterns for cable tracing
and troubleshooting.
• Tracing modes can be adjusted for high performance LAN cables.
• Complete set of connector types standard (telephone, LAN and coax).
• Nested remote allows end-to-end testing of all wiring types.
• Simple testing of LAN wiring and phone lines.
• Detection of common wiring and connector errors.
• Warning of hazardous voltages.
• Checks for reversed telephone wires.
SPECIFICATIONS
Dimensions
Weight
Power Source
User Interface
150 x 70 x 33mm
220g including remote unit and battery
9V Alkaline battery (PP3)
Icon and seven segment type
Display LCD
Green LED
Backlight
Four momentary contact push button
Buttons
Environmental
Operating
Temperature
0°C to 50°C
Storage
Temperature
-10°C to 60°C
Interface
Connections
Network Split
Pair Detection
Pair Tracing
Tones
Cat. No.
NC-100
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
up to 95% non-condensing
Humidity
RJ45 shielded socket
RJ12 6-way socket
F-type threaded female coaxial connectors
Minimum cable
2 to 3 meters (5 to 10 ft.) depending on cable type
length
Alternating frequencies of 577Hz and 983Hz are produced at three user selectable rates. Designed for standard tone probes, but
compatible with precision digital Greenlee tone probes.
UPC No.
23636
Description
NETcat® Micro Digital Voice Data and Video Wiring Tester
www.greenlee.com
321
COMMUNICATIONs
LAN ProNavigator™ Tester & Remote
• Simple PASS/FAIL test results in one second allows technicians to quickly
move on to the next test site.
• Generates oscillating audio tone for use with tone probes to locate cables.
• Tests data and telephone cables up to 320 feet (100 meters) for proper
pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and
common Category 5 configurations.
• Tests unshielded UTP and shielded STP data cable.
• Detects good connections, open connections, crossed wires and split pairs.
• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320
feet (100 meters) for continuity.
• Tests coaxial cable types RG58, RG59, RG6, RG6 Quad, Belden 8281, RG8,
RG11 and more.
• Belt clips provided and lanyard holes embedded in case to attach
to belt or wrist.
• Features low battery test and auto-off function to preserve battery life.
• Includes standard 9V battery.
Main
Remote
Cat. No.
Description
PA1543
LAN ProNavigator™ test set (main & remote),
2 RJ45 patch cords, 2 belt clips, 12 oz.(342 g)
LAN ProNavigator™ test set (main & remote),
2 RJ45 patch cords, 2 BNC coaxial cables,
2 CATV “F”-to-BNC adapters, 1 BNC/BNC adapter,
1 shielded RJ45 coupler, 2 belt clips in durable case
Adapter, CATV “F” (female) to BNC (male)
PA901066
PA901074
NOTE: May not be compatible with CAT-6 flat or oval cable, or bonded cable.
PA901066
SPECIFICATIONS
MAIN
REMOTE
KIT
Weight
Dimensions
8 oz. (228 g)
5.25" x 6.75" x 2.25"
133 mm x 171 mm x 57 mm
2 oz. (57 g)
3.45" x 1.6" x 0.9"
87 mm x 41 mm x 24 mm
2 oz. (1140 g)
8.5" x 7.6" x 3"
216 mm x 193 mm x 76 mm
TRUSTED
322
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
Wiremap Tester
• Quickly identifies opens, shorts, reversals and transposed pairs.
• Economical tester includes all the basic functions.
• Connecting the receiver unit automatically activates the test process.
• Sequencing red and green LEDs provide fast, accurate
and simple-to-­understand results.
• Alerts the technician if connected to an active circuit without harming the unit.
• Connect any eight-position modular plug to the appropriate jack on the
transmitter and a sweeping tone signal is applied to all pairs.
• At the far end of the cable, use any Tempo inductive amplifier (probe)
to locate the corresponding plug or jack.
• Battery operated (9V not included).
468
Cat. No.
468
468C
468T
468R
CSI0
UPC No.
08661
60382
60379
60380
60381
Description
Wiremap Tester
Carrying Case for the Wiremap Tester
Transmitter
Receiver
Modular Adapter Cable
Data/Link ID and Cable-Check™
• Cable mapping function tests data & phone connection schemes including
patch cords and installed cables.
• Identifies cross-over telephone connections.
• Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP
link pulse.
• Identify data & link transmission speeds with real time detection: 100/10 MB.
• Automatically scans with choice of slow or fast speeds.
• Low battery detection on LAN ID tester.
• Includes 9V battery, 2 RJ45 patch cords and durable nylon carrying case
with belt loop.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
PA1576
Data/Link ID and Cable-Check™
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
323
COMMUNICATIONs
LAN Cable-Check™
• Identifies cross-over telephone connections.
• Automatically scans when cables connected and unit turned on.
• Two scan speeds: fast or slow.
• Maps connector and cable pin-out.
• Tests cables up to 1,650’ or 500 m.
• Also tests RJ11 connections using an RJ11 adapter (not included).
• 2, RJ45 patch cords and 9V battery included.
• Contained in a durable nylon carrying case with belt loop.
Cat. No.
Description
PA1574
LAN Cable-Check™ Tester
LAN and A/V Cable-Check™
Network
• Tests RJ45 patch cords and network installations to identify good
connections, opens, shorts or cross-connections.
• Identifies data and telephone connection schemes.
• Maps cable pin-out.
Coax
• Tests continuity of cords and installed cable runs.
• Identifies good connections, opens and shorts.
Features and Benefits:
• Automatic scanning.
• User selectable slow or fast speeds.
• Quickly check cable installations and patch cords.
• Easy-to-use with clear LED read-outs.
Includes:
• 2 RJ45 patch cords
• 9V battery
• 75-ohm male terminator
• Durable, nylon carrying case
• Cable TV “F” female adapter •RCA to CATV "F" adapter.
PC Cable-Check® PRO
Cat. No.
Description
PA1594
LAN and A/V Cable-Check™
• Quickly & easily troubleshoot cables to eliminate the cable as the source
of a problem.
• True cable mapping for over 20 different cable types: BNC coax & S-Video,
VGA, Firewire, USB & Mini-USB, PS/2, parallel printer, RS-232 serial and
Cat5e or Cat6 LAN.
• Supports these connectors: male and female DB9, DB15, DB25 and
HDB15; 36-pin Centronics printer; RJ11, RJ12, RJ45 shielded &
unshielded; BNC coax female; male and female mini-DIN6; female miniDIN4; USB-A and USB-B; mini-USB 5-pin; IEEE 1394 FireWire 4- and 6-pin
• Tests 50 ohm cables up to 1000’ (305 m) & 75 ohm cables up to
600’ (183 m).
• Easy to read and understand LED indicator lights.
• New rugged case with built-in handle for easy transport.
• Auto scan or manual scan modes.
• Rubber feet grip to desk or bench to prevent slipping.
• Auto-off after 30 seconds of non-use to extend battery life.
• 9V battery included.
TRUSTED
324
SINCE
1862
Cat. No.
Description
PA1577
PC Cable-Check® Pro
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
CABLE & SERVICE TESTING
TM-700 Tele-Mate® Telephone Test Set TM-700
• Complete telephone set with ringer
• Phone-to-phone intercom, compatible with other SmartIntercom™ devices
• Modular or alligator clip connection
• Amplified loudspeaker line monitor
• Headset or handset operation
• Tone and pulse dialing
• Large 10-location speed dialing memory
• Multi-memory redial
• DTMF digit detection and measurement
• Tone output mode
• Caller ID with name display
• Call waiting Caller ID
• Missed call indication
• DSL compatible, high impedance monitor and filters
• Glow-in-the-dark keypad
• Line voltage and current display
• High voltage detect and lockout
• High current detect and lockout
• Uses 2 AA/LR6 batteries (included)
• Quick release belt-clip
A product video is
available, scan this QR
code or visit:
www.youtube.com/GreenleeDEMO
Specifications
Technical Specifications
Length:
Width:
Height:
CAT NO.
UPC NO.
TM-700
00984
DESCRIPTION
QTY.
TM-700 Tele-Mate® TELEPHONE TEST SET
1
9.25" (235 mm)
2.5" (64 mm)
3.25" (83 mm)
Tele-Mate® Telephone Test Set
• Luminescent (glow-in-the-dark) keypad
• Can be used safely on a DSL enabled line
• High Impedance Monitor for monitoring line without disrupting existing
traffic
• Over voltage and over current protection
• Tone and Pulse dialing for versatility on old and new phone lines
• Polarity test with LED indicator
• 32 digit last number redial and pause
• 10 number speed dial
• Adjustable volume control plus mute
• Pause
• Flash to generate a timed break recall
• Line powered, no battery needed
• Headset (included) for hands free operation
• RJ11 socket
• Quick release belt-clip
Specifications
Technical Specifications
Length:
Width:
Height:
USA
PHONE 800.435.0786
FAX 800.451.2632
9.25" (235 mm)
2.5" (64 mm)
3.25" (83 mm)
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
CAT NO.
UPC NO.
TM-500
00486
TM-500T
00494
TM-500i
00643
PHONE +1.815.397.7070
FAX +1.815.397.9247
DESCRIPTION
QTY.
Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips
(POP)
Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips
(Boxed)
Telephone Test Set W/ Small Croc Clips (Boxed)
1
1
1
www.greenlee.com
325
COMMUNICATIONs
Nautilus Range Telephone Test Sets
• Waterproof tested to an IEC IP67 rating, these test sets are so impervious to
water they can actually withstand submersion, though they actually float.
• The PE961 features our DigAlert™ over-voltage alarm and ­lock-out
function to reduce the risk of damaging or knocking out digital ­service lines.
• Built-in DSL Filter.
• Ten-number speed dial memory (32 digits each).
• Last number redial.
• Precise hook flash.
• Microphone mute.
• Audible and visual mode indicators.
• Polarity test in any mode.
• Unique quick-release belt clip.
• Premium cord set with bed-of-nails and piercing pin clips.
• Luminescent Keymat.
PE961
Cat. No.
PE930
PE945
PE961
PE901
PE902
TRUSTED
326
SINCE
1862
UPC No.
60487
60489
60511
60492
60493
Description
Telephone Test Set
Test Set with Two-Way Hands Free
Test Set with Two-Way Hands Free and DigAlert
Ground Start Cord Set
Cord Set
Feature
PE930
PE945
PE961
Monitor safe for data
Adjustable Ringer
Waterproof Design
Loud Speaker Listening
Two-Way Hands Free
DigAlert™ Data Lock-out
ADSL Compatible
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Sidekick® Plus Advanced Cable Maintenance Test Set
• 1 Gigaohm Insulation Resistance
• Advanced Pulse TDR for improved accuracy (Step TDR option available)
• Improved speed of test and menu selection
• Long lasting, Li-Ion Rechargeable Batteries
Optional Features
• Available at Launch: Enable Wideband testing (Software Update)
- Noise Spectrum Analysis to 30 MHz
- Loss measurements to 4.4MHz
- Reference Tone to 4.4MHz
• Coming Soon: Sidekick Plus® with Wideband and VDSL / ADSL Sync
- All standard features of Sidekick Plus with Wideband plus:
- Display of DSL Showtime information
- Error and Alarm detection
- Graphical display of bits-per-tone, signal-to-noise
Cat. No.
1155-5001
1155-5003
1155-5005
1155-5009
UPC No.
01316
01324
01463
01317
Description
Sidekick Plus Kit
Sidekick Plus CE Kit
Sidekick Plus Kit with Impulse Noise, Step TDR
Sidekick Plus with Wideband
SPECIFICATIONS
Stress Test
AC Volts
DC Volts
Resistance
Leakage
Open Meter
Count Load Coils
Loop Current
Circuit Loss
Circuit Noise
Tracing Tone Generator
Reference Tone Output Level
Custom Auto Test with Pass/Fail
Display Resolution
Battery
Battery Life (Typical)
Weight (Including Battery)
Operating Conditions
IP Rating/Environmental Protection
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
0 to 82 dBrnC
250V
300V
100 MΩ
999 MΩ
Up to 18.6 miles (30 km)
0 to 5
110 mA
-70 to 3 dBm
0 to 90 dBrnC
200 Hz to 20 kHz
3 to -20 dBm
400 Autotest Results
320 x 240 sunlight readable
Li-Ion
8 hours
3 lbs (1.4 kg)
-0.4 to 122 °F (-18 to 50 °C),
0 to 95% Humidity
BS EN 60529 level IP20C
www.greenlee.com
327
COMMUNICATIONs
Sidekick® SYNC
• ADSL, ADSL2, ADSL2+ and VDSL2 Modem emulation
• CPE and Comodem emulation
• Isolates problems anywhere along the network
• Simple one-button testing for quick deployment
• Performs multiple diagnostic tests with only one instrument
• Auto Test makes testing customizable and consistent
• Easy-to-read digital display reduces meter interpretation errors
• Easily determines if the fault is inside or outside the premise
• Finds faults other test sets miss
• Simplifies troubleshooting
• Increase technician productivity
• Reduces repeat trouble calls
CAT NO.
DESCRIPTION
QTY.
00720
SIDEKICK SYNC (1160-5000)
1
1160-0100
00721
MANUAL, SIDEKICK SYNC ENGLISH
1
1160-0101
00722
SOFTCASE, SIDEKICK SYNC
1
1160-0102
00723
CORD, RJ11 TO RING TIP POPPER CLIP
1
1160-5000
UPC NO.
1160-0103
00724
ADAPTER USB 2.0 A TO MICRO B FEMALE
1
1160-0104
00725
BATTERY, LI-ION, 3 CELL SMBUS
1
1160-0105
00726
ADAPTER VEHICLE 6FT 5.5 OD, 2.5MM
1
1160-0106
00728
PWR 100-250VAC 2.5MM 15V 1.2A
1
1160-0107
00729
ADAPTER, COAX FEMALE TO FEMALE
1
1160-0108
00733
ASSY, DOOR, SIDEKICK SYNC
1
1160-1000
00734
TOP ASSY, SIDEKICK SYNC
1
SPECIFICATIONS
Display
Size:
Type:
128 x 64 pixels (3.07”)
Monochrome (Sunlight Readable) transreflective w/LED backlight.
Batteries
Type:
Capacity:
Charge Time:
Size:
Weight:
Shock/vibration:
Operating Temp.:
Storage Temp.:
Humidity:
Lithium Ion
18 hours of use per charge(typical)
4 hours
8.85” x 4.8” x 1.92” (224.9mm x 121.9mm x 48.77mm)
2.25 lbs (1.02kg) w/cords and softcase
Per Mil-std-810F
-14° F to 122° F (-10° C to 50° C)
-4° F to 140° F (-20° C to 60° C )
95% non-condensing
Test Leads
Length:
Plug Type:
Clip Type:
Other
Connections:
Certifications:
TRUSTED
328
SINCE
1862
USA
4'
RJ11
Popper Type
RJ11
RJ45
F type Male Connector
USB Micro B
CE (Pending)
RoHS/WEEE (Pending)
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Sidekick® T&ND
• Easy-to-read digital LCD display.
• Internal Dialer for making Transmission Test connections.
• Autotest – performs 22 individual tests at the touch of a button.
• Determines the stressed noise susceptibility of dry and working pairs.
• Measures AC/DC Volts, Leakage, resistance, and loop current.
• Performs circuit loss, circuit noise (metallic noise), and power influence tests.
• Built-in open meter.
• Locates up to 4 load coils.
• Single set up for Tip-Ring, Tip-Ground, and Ring-Ground tests.
• Field replaceable test leads.
• On-screen display of “LOW BATTERY” when batteries are near failure.
1144-5000
SPECIFICATIONS
Weight
Dimensions
AC Volts
DC Volts
Resistance
Leakage
Stress
Cat. No.
1144-5000
1134-1002S
2 lbs.
10.75" X 4.25" X 2.5"
300 Vrms max.
± 300 Volts max.
1 Megohm max.
100 Megohm max.
0 to 82 dBrnC
UPC No.
60853
60752
Opens
Loop Current
Load Coil
Circuit Loss
Power Influence
Circuit Noise
Power
0 to 60 kft.
0 to 100 mA
up to 4
+1 to -15 dB
40 to 100 dBrnC
0 to 75 dBrnC
Four AA Batteries
Description
Sidekick T&ND Test Set
Case
Sidekick® T&N
• Five transmission and noise tests.
• Determines the stressed noise susceptibility of dry and working pairs.
• Measures resistance, AC/DC volts, and capacitive kick.
• Provides tone for twisted pair or crossed conductor identification.
• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground.
• Minimal drying effect in all ranges.
• Field replaceable leads.
• Softcase with adjustable strand hook.
• Low battery indicator light.
1137-5002
Specifications
Dimensions
Weight
Resistance
Leakage
DC Voltage
AC Voltage
Cat. No.
1137-5002
1134-1002S
1131-0202
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
10.75" x 4.25" x 2.5"
2 lbs.
Rx1: Reads 0 to 2000 Ω
Rx1K: Reads 0 to 2 MΩ
Rx10K: Reads 0 to 20 MΩ
0 to 300 volts DC
0 to 300 Vrms
UPC No.
60526
60752
60751
Stress Test
Loop Current
Circuit Noise
Circuit Loss
Power Influence
Operating Temp.
Power
0 to 82 dBrnC
0 to 100 mA
0 to 75 dBrnC
-15 to +1 dB
50 to 100 dBrnC
-4°F to +140°F
Four AA batteries
Description
Sidekick T&N
Case
Test Leads
www.greenlee.com
329
COMMUNICATIONs
Sidekick® 7B
1134-5029
• Determines the stressed noise susceptibility of dry and working pairs.
• Measures resistance, AC/DC volts, and capacitive kick.
• Provides tone for twisted pair or crossed conductor identification.
• Single setup for testing Tip-Ring, Tip-Ground,  and Ring-Ground.
• Minimal drying effect in all ranges.
• Field replaceable leads.
• Softcase with adjustable strand hook.
• Low battery indicator light.
SPECIFICATIONS
Dimensions
Weight
Resistance
Leakage
DC Voltage
AC Voltage
Stress Test
Cat. No.
10.75" x 4.25" x 2.5"
2 lbs.
Rx1: Reads 0 to 2000 Ω; Rx1K: Reads 0 to 2 MΩ
Rx10K: Reads 0 to 20 MΩ
0 to 100 Volts DC
0 to 200 Vrms
0 to 82 dBrnC
UPC No.
1134-5029
1134-1002S
1131-0202
60525
60752
60751
Description
Sidekick 7B
Case
Test Leads
ToneRanger
• Direct buried fault location, it gives an exact location to the fault.
• Locates open shield and open bond faults.
• Locates twisted-pair resistance faults in aerial, underground, and direct
buried cable.
• Locates splits, opens and bridge taps.
• Uses low voltage and does not damage cable, circuit cards, C.O. or
subscriber equipment.
• Sends Pair ID tone through wet pulp and saves service outage time on
small count section throws.
• Locates open shields and shield to earth faults.
• Does not interfere with DSL, IPTV or digital services on adjacent lines.
• NEW easy user interface.
Cat. No.
10101-50000
10101-51000
10101-51100
10101-51200
10101-51300
10101-51400
52042471
TRUSTED
330
SINCE
1862
USA
UPC NO.
27345
02066
02028
27338
27321
20191
–
PHONE 800.435.0786
FAX 800.451.2632
Description
TF1A Kit, ToneRanger Aerial
TF1ABL Kit, ToneRanger Aerial and Buried
TF1AP Kit, ToneRanger Aerial with Pair ID
TF1AB Kit, ToneRanger Aerial with Buried Wand
TF1AL Kit, ToneRanger Aerial with Layup Stick
TF1ABLP Kit, ToneRanger with Aerial, Buried & Pair ID
Transmitter Test Cable
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Throwmaster® Paragon
• Used by construction cable splicers all around the world.
• Transfer telephone/broadband services during normal working hours.
• Does not interrupt important customers.
• Simple to follow interface and process for successful transfer of circuits.
• LED's on the cords aid in telling the user in the cut, transfer and splice.
• Compatible with T-1, HDSL, HDSL-2, HDSL-4, ADSL and other services
less than 10Mb/s.
• Each step is automatically tested and verifies the circuit is complete at the
end of the transfer.
Cat. No.
0529-0001
UPC NO.
29019
Description
Throwmaster® Paragon 519 Kit
1155 Fault Loop Simulator
• Simulates 8 fualts that can be used individually, or in a combination:
– Cross battery.
– Resistive 5 kohm load to ground.
– Resistive 500 ohm short.
– Two balanced bridge taps.
– 60 ohm series resistance fault.
– 60 Hz Power Influence.
– High frequency noise.
• 1910 foot cable length.
• Battery operated.
• Rugedized case.
• Convenient Test Lead connections.
• Three access locations in the span for custom faults.
• Train users on real twisted-pair faults.
• Test multiple test set functions such as RFL, TDR, Power Influence, Stress,
Leakage, Resistance, impulse noise and others.
• Verify results from the field in a controlled environment.
• Demonstrates how noise increases with pair imbalances.
• Show differences between shorts, bridge taps, series faults and opens
with a TDR.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
UPC NO.
1155-7001
57691
PHONE +1.815.397.7070
FAX +1.815.397.9247
Description
Test Set
www.greenlee.com
331
COMMUNICATIONs
4-6-8 Modular Adapters
• Nylon-reinforced ABS plastic body.
• Easy-to-read wire layout.
• Removable/replaceable patch cord.
• Inline adapters.
• Snagless plugs.
• Belt clip.
• Notched copper contacts keep alligator clips attached during testing.
Cat. No.
Description
PA1902
PA1903
RJ45 Modular Adapter (8-way)
RJ11 Modular Adapter (6-way)
TurTEL Modular Adapters/Polarity Tester
• Use with tone generators, test sets and other test devices to troubleshoot
and isolate problems with telephone circuits.
• Two jacks allow in-line testing without service interruption.
• The TurTEL 6 has two six-position, six-wire jacks.
• The TurTEL 8 has two eight-position, eight-wire jacks.
• Simple, push button operation to check polarity and power.
• Reduced chance of shorting adjacent alligator clips due to unique shape.
• Test contacts are perforated to provide sure grip for alligator clips or use
of probes.
• The TurTEL 6 has an internal circuit to allow testing of polarity for either
of two lines (pairs 4 to 5 or 3 to 6) – circuit allows verification of power
and phone number assignments.
• Patch cord included.
• Heavy-duty stainless steel belt clip.
46040
46050
Cat. No.
46040
46050
TRUSTED
332
SINCE
1862
USA
UPC No.
46040
46050
PHONE 800.435.0786
FAX 800.451.2632
Description
TurTEL 6 Modular Adapter/Polarity Tester
TurTEL 8 Modular Adapter
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
B
= Accessory
= Bare tool
TelScout® TS90
• Two Pair Test Capability.
• One-Step Setup.
• Automatic Instrument Control Mode.
• 45,000' (15 km) Fault Location Capability.
• Splash and Drip Proof.
• Single-Button Zoom Function.
• Pair Comparison Mode.
• Splits/Crosstalk Mode.
• Intermittent Fault Location.
• Measures Distance to Fault in Feet, Meters, or Time.
• Configurable for Any Cable Type and Vp (0.300 to 1.000).
• Accurate (±3 ft. at 10,000 ft.).
• On-line Tutorials.
• Large Backlit Display.
SPECIFICATIONS
SPECIFICATIONS
Environmental
Physical
Temperature –
Operating: 32° F to 77°F (0° C to +45° C).
Non-operating: 12° F to 92°F (-20° C to +60°
C).Humidity – 95% RH, non-condensing.
EMI Emissions –
EN55011 class A.
EN60555-2.
Power
Battery Operation –
Battery Type: Six AA Alkaline.
Operating Time: >4.5 hrs. with backlight off.
Battery Saver:
Selectable for 5 to 30 minutes or disabled.
Cat. No.
Dimensions
Height
Width
Depth
in.
5.6
8.3
1.8
mm
141
211
43
Weight
Net
.lb
2.2
kg.
1
UPC No.
012154500
THM5BAT
60740
60756
Description
Leads
Rechargeable Battery Pack
CATV
Test Sets
Sidekick V.O.C.
®
• Identifies defective inside wire and jacks.
• Measures resistance, AC/DC volts, quasi square wave, and pair balance.
• Identifies shorts, opens, crosses and grounds.
• Replaces the need for other meters.
• Provides tone for twisted pair or crossed conductor identification.
• Single set-up for testing Tip-Ring, Tip-Ground, and Ring-Ground with
ground connection.
• Field replaceable leads.
• Softcase with adjustable hook.
• Low battery indicator light.
SPECIFICATIONS
Dimensions
Weight
Resistance
1143-5000
Leakage
DC Voltage
AC Voltage
Stress Test
Operating Temp.
Power
Cat. No.
1143-5000
1134-1002S
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
10.75 x 4.25 x 2.5 inches
2 lbs.
Rx1: Reads 0 to 2000 Ω
Rx1K: Reads 0 to 2 Megohms
Rx10K: Reads 0 to 20 Megohms
0 to 100 Volts DC
0 to 200 Vrms
0 to 82 dBrnC
-4°F to +140°F
Four AA batteries
UPC No.
Description
60527
60752
Sidekick V.O.C.
Case
www.greenlee.com
333
COMMUNICATIONs
CableScout™ TV220 - TDR Cable Tester for CATV
• Easier-to-use GUI interface requires little or no training
• PC application is compatible with all the current operating systems
• Improved clarity and trace functionality makes it even easier to identify faults
on-screen and determine noise versus the fault
• Even higher SNR and Resolution makes it easier to identify events that were
previously difficult or impossible to find
• Zero dead zone at the launch allows the user to see faults immediately
• Improved trace update rate allows you to see changes to the fault faster (5
times/sec. versus 2 times/sec.)
• Higher capacity to hold traces
• USB interface for trace download
• Lighter weight and longer charge life with the new lithium-ion battery
• TestWizard™ one-button testing
• Automatic Return Loss Measurements
• Automatic Multiple Event Marking
• High-Resolution, Short Pulse Width (1 ns)
• Rugged enough to withstand a 2 meter drop
CAT NO.
UPC NO.
TV220
TV220-0350
1155-1010
174173401
174326900
Return Loss
Distance Accuracy
Display
Power
AC Operation –
Test Signal Output – 1/2 Sine
Amplitude – 4V into 75 Ω
Pulse Width – 1 ns, 5 ns, 25 ns
Output Impedance – 75 Ω
Acquisition System Bandwidth – 400 MHz
Automatic at cursor location
Resolution: ±1 dB
Input Protection – ±400 VDC + peak AC up to 440 Hz,
30-second duration
Maximum Distance Range – 12,000 ft. (3,658 m),
depending on cable type and condition
Gain – 0 to 72 dB
Waveform Storage – Minimum of 20 waveforms with notes
Feet:
0 to 2,000 ft.: ±2 ft. ± uncertainty in Vp 2,001 to 6,000
ft.: ±3 ft. ± uncertainty in Vp 6,001 to 12,000 ft.: ±4 ft. ±
uncertainty in Vp Meters:
0 to 610 m: ±0.6 m ± uncertainty in Vp
611 to 1830 m: ±0.9 m ± uncertainty in Vp 1831 to 3658
m: ±1.2 m ± uncertainty in Vp
Resolution: 640 x 440 (281,600 pixels)
Size: 7.2 inch
Type: High contrast LCD
Backlight: Operator switchable
Waveform Display Resolution – 0.33% of selected range,
4.5 cm (0.15 ft.) minimum
Display Ranges – Twelve display ranges from 6 ft. (1.8
m) to
12,000 ft. (3,658 m), plus single-button zoom window
Output Port – Serial 9-pin D type connector
Distance Measurements – Meters, feet, nanoseconds
TRUSTED
334
TDR for CATV Broadband
Soft Carrying Case
Power Supply, AC-DC
Vehicle DC Adapter/Charger
Replacement Power Cord
Specifications
Specifications
Output
DESCRIPTION
00676
17404
25877
16407
16414
SINCE
1862
Battery Operation –
General Characteristics
Temperature –
EMI Emissions –
Safety –
Voltage Ranges: 110 V, 220 V, or 240 V with appropriate
AC to DC adapter
Line Frequency: 50 Hz to 60 Hz
DC Operation –
Voltage Range: 9 to 16 VDC @ 1A (charging and operating)
Type: Internal Li-Ion rechargeable battery
Operating Time: Typically 12 hours continuous operation
(backlight off)
Battery Savers (user selectable) –
Shutoff: 5 to 30 minutes or disabled
Backlight: Shutoff 5 to 30 minutes, disabled, or always on
Operating: –10° C to +40° C (+11° F to +104° F) Nonoperating: –20° C to +60° C (–4° F to +140° F) Humidity
– 10% to 95% (non-condensing)
Field Usage – Shock, water, and dust resistant
Durability – Survives drop of 2 meters (6 ft.) to concrete in
standard soft case. Drip proof, dust resistant
EN55011, Class A
EN60555-2
CE (Low Voltage Directive)
Physical
Dimensions
Height
Width
Depth
Weight
Net
USA
PHONE 800.435.0786
FAX 800.451.2632
Centimeters
Inches
24
30
9
9.5
11.5
3.5
Kilograms
Pounds
3
6.4
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
CableScout™ TV90
• High performance easy to use, Time Domain Reflectometer for Coaxial
testing applications.
• Employs optimized pulsing and sampling, coupled with advanced
filtering and signal-processing techniques to ensure clean waveform
and easy identification.
• Context-sensitive help screens for all functions.
• Small, portable and lightweight 2.2 lbs. (1kg).
• Includes rechargeable battery pack.
• Includes twisted pair adapter and test probe.
Cat. No.
TV90
THM5BAT
THM5AC
TS90-0350
UPC No.
12600
60756
17299
17398
Description
TV90 CableScout™ TDR
Rechargeable Battery Pack
AC Adapter 110V
Soft Carrying Case
SPECIFICATIONS
• Easy to operate (help screens available for all functions)
• Fast fault finding with automatic gain and vertical waveform positioning
• One-button Expand/Full View Function and zoom control.
• Precision accuracy 0-200 ft +- 2 ft. 1% beyond.
• Range up to 4000 ft.
• High-resolution with optimizing pulse and sampling and advanced filtering
• Input Protection: 200 VDC + Peak AC.
• Rugged - designed for harsh environments
• Large 7.2-in. high-resolution backlit display.
• International power supply options
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Environmental
Temperature:
Operating: 32° F to 77°F (0° C to +45° C).
Non-Operating: 12° F to 92°F (-20° C to +60° C).
Durability: Survives Drop test of 6 foot (2m) to concrete in soft case
Power: 110 V, 220 V, 240 V with appropriate power adapter
Battery type: 6 AA Alkaline and NiCad rechargeable pack. 4.5 hours continuous operation with adjustable battery saver modes
Standards
PHONE +1.815.397.7070
FAX +1.815.397.9247
UL, FCC EMI, CAN/CSA, EN, and CE
www.greenlee.com
335
COMMUNICATIONs
BURIED FACILITY LOCATION AND MARKING
Tracker II
• Traces the path and determines the depth of wires and metallic pipes on active or
dead systems without having to deactivate the system.
• Lightweight receiver provides audible and visual indications of signal strength.
• Transmitter output and receiver sensitivity are fully adjustable for maximum
accuracy.
• Transmitter offers three methods of connection: direct, inductive coupler and
inductive antenna.
• Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in
inductive antenna, two 8' (2.4 m) test leads with heavy-duty alligator clips and
durable polyethylene case.
• High frequency transmitter provides range up to 4,000' (1,219 m) and depths up to
7' (2 m).
• Receiver is 32" long (813 mm).
• Battery operated (eight AA and one 9V battery is included).
• Molded carrying case included.
HS-1 (08695)
Optional headset is available
for use in high-traffic areas or
other noisy environments.
CAT. No.
501
501T
501R
IC1
CS16
500CA
UPC No.
08662
60353
60352
60354
60355
60351
Description
SPECIFICATIONS
Tracker II
Transmitter
Receiver
Inductive Clamp
Transmitter Cord Set
Case with Antenna
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Automatic Shut Off
Construction
Dimensions
Weight
Transmitter – (8) AA batteries; Receiver – (1) 9V battery
Transmitter – 30 hours nominal; Receiver – 10 hours nominal
447.5kHz
40Vp-p (140mW) maximum
240VAC/500VDC
90 Min. Transmitter and Receiver
Transmitter/Receiver – powder coated aluminum
Case – vacuum formed polyethylene
Transmitter – 4.25" x 3" x 3.25" (108 x 76.2 x 82.6 mm)
Receiver – 32" x 2.75" x 4" (812.8 x 69.9 x 101.6 mm)
Case – 33.5" x 8.25" x 3.75" (850.9 x 209.6 x 95.3 mm)
6.7 lbs. complete kit (3.04 kg)
Buried Line Locator
• LED and LCD signal strength indicators make it quick and easy to find exact line
location.
• Lightweight and ergonomically balanced.
• Automatic signal boost makes it easy to trace lines, even those with very weak
signals.
• Receiver may be used in active or passive mode.
• Receiver locates multiple passive frequencies with a single setting.
• Receiver automatically locks out passive range when it detects a transmitter signal,
reducing the chance of tracing other lines carrying weaker signals.
• Microprocessor-based circuitry delivers increased accuracy and features auto-gain
control in all environments.
• Traces 20' (6 m) underground and provides depth readings up to 15' (4.57 m).
• Transmitter can be connected to live lines up to 600V.
• Molded carrying case included.
Cat. No.
UPC No.
Description
SPECIFICATIONS
BLL-200
07796
Buried Line Locator
Transmitter
Operating Voltage
Current
Frequency
Operating Temperature
Size
Power
Weight
TRUSTED
336
SINCE
1862
0-600VAC,
0-300 VDC
13mA (open line)
150mA (live or shorted line)
33.3kHz
0°F to 120°F
(-17°C to 50°C)
7.5" x 4" x 2.1"
(190.5 mm x 101.6 mm x 53 mm)
6 VDC (4 AA batteries)
15 oz. (425 g)
(with batteries and clamp)
USA
PHONE 800.435.0786
FAX 800.451.2632
Receiver
Depth Range
Depth Resolution
Passive Trace Frequency
Operating Temperature
Size
Power
Weight
CANADA
Measures: 0-15 ft
Traces: 0-20 ft.
0.1 ft. increments
‑ 12Hz-24kHz
0°F to 120°F
(-17°C to 50°C)
4.1" x 8.5" x 38"
(104.1 mm x 215.9 mm x 965.2 mm)
6 VDC (4 AA batteries)
1 lb. 12 oz. (794 g)
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= Replacement Part
= new product
= Accessory
B
= Bare tool
Pulser Fault Locator
PE2003
Great complement to any
buried line cable locator.
• Identifies the exact location of even the smallest breaks in insulation
by “pulsing” a high-voltage signal that radiates into the earth at the location
of the faults. With the A-frame mounted receiver, a visual analog meter
points the way to the source of the voltage.
• Multiple faults on a single wire can be identified indicating the need
to ­replace instead of repair.
• Extra-long test leads feature heavy-duty alligator clips for use on multiple
cable types.
• Includes a rechargeable transmitter, receiver, A-frame, ground stake,
120V charger and a 12V DC (cigarette lighter) adapter.
• Battery operated (one 12V and one 9V battery are included).
• Molded carrying case included.
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter Power
Voltage Protection
Construction
CAT. No.
UPC No.
PE2003
2000H
2000R
AF2
CH1
CH2
59F0002
08666
60357
60358
60482
60360
60361
66216
Description
Dimensions
Pulser
Transmitter (Includes CH1 & CH2)
Receiver
A-Frame
AC Charger
DC Charger
Battery, Replacement (12V 2.5 Ah)
Weight
Transmitter: (1) 12V rechargeable battery
Receiver: (1) 9V battery
Transmitter: 23 hours per charge; Receiver: 200 hours
2400VDC peak
240VAC/400VDC
Transmitter – aluminum housing in polyethylene case
Receiver – powder coated aluminum
Transmitter – 17" x 8.5" x 6.5" (421 mm x 215 mm x 160 mm) in
case
Receiver – 33.5" x 21.75" x 3.25" (840 mm x 550 mm x 8 mm) on
A-Frame
12.5 lbs. (5.7 kg) complete
Wire Finder/Mini Locator
• Traces energized or non-energized wires in walls and drop ceilings.
• Provides reliable results on buried cables to depths of 3' (1 m)
and lengths up to 1000' (308 m).
• Determines the approximate depth of the wire before digging.
• Compact design and easy-to-understand operations.
• Fully adjustable transmitter and receiver for accurate locating.
• Quick change test leads for use in any industry, even international power
outlets.
• Voltage protection to allow use on live AC circuits.
• Automatic shut-off to prevent accidental battery discharge.
• Housed in a durable, molded carrying case with a quick reference ­operation
guide on the inside of the lid.
• Battery-operated: (2) 9V batteries included.
SPECIFICATIONS
CAT. No.
508S
508ST
508SR
CS14
CS15
USA
UPC. No
08678
60363
60364
60366
60367
PHONE 800.435.0786
FAX 800.451.2632
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Description
Wire Finder/Mini Locator
Transmitter
Receiver
Alligator Clip Cord set
AC Outlet Cord set
CANADA
PHONE 866.384.8813
FAX 800.524.2853
Dimensions
Weight
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
(1) 9V each (transmitter and receiver, included)
Transmitter 35 hours nominal; Receiver 20 hours nominal
447.5kHz
9Vp-p (11mW)
240VAC/500VDC
Transmitter/Receiver – high-impact ABS plastic,
Case – vacuum-formed polyethylene
Transmitter – 4" x 2.3" x 1" (101.6 x 58.4 x 25.4 mm), Receiver –
6" x 2.35" x 1" (152.4 x 59.7 x 25.4 mm), Case – 9.5" x 8" x 3"(241.3 x 203.2 x 76.2 mm)
2.6 lbs. (1.2 kg)
www.greenlee.com
337
COMMUNICATIONs
Wire and Valve Locator
• Adjustable transmit power allows you to select the best signal for maximum
performance.
• Transmitter’s high power output offers extended range and use on higher
resistance wire paths that other locators can’t touch.
• Receiver provides both audible and visual indications of signal strength.
• Lightweight receiver wand makes it easy for you to move along quickly
to locate even the longest wire path.
• Rugged headphones block ambient noise and improve “feel” for the ­signal.
• Includes transmitter, receiver, headset, ground stake, and complete ­instructions.
• Battery-operated: (8) “D” Cells and (1) 9V.
SPECIFICATIONS
Power Requirements
Transmitter: (8) “D” Cell;
Receiver: (1) 9V battery
Transmitter: 50 hours nominal
Receiver: 100 hours nominal
1748Hz
750Vp-p 285Vrms
120VAC/250VDC
Powder-coated aluminum housing in polyethylene case
33.5" x 8.25" x 3.75"
12 lbs. complete
Battery Life
CAT. No.
521A
521A-R
HS1
GS1
UPC No.
86788
12623
08695
60362
Description
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Case Dimensions
Weight
Wire and Valve Locator
Receiver
Headset
Ground Stake
Locators Application Guide
FEATURE
BLL-200
Trace concealed wiring in walls and floors
501
PE2003
Locate junction box relays and transformers
•
Locate switch gear
•
521A
•
•2
Find shorts to ground
Trace wires in PVC (nonmetallic conduit)
508S
•
•
•1
•
•
Find opens in a circuit
•
Localize power and lighting panels
•
•
•
Operate on energized circuits
•
•
•
Operate on telecom circuits
•
•
•
•
Operate on power circuits (600VAC)
•
Operate on unenergized circuits
•
•
•
•
•
•
•3
•3
•3
Trace coax cable
•
•5
•5
•4
Auto gain circuitry for improved accuracy
•
AC voltage range
0-600V
0-240V
0-240V
0-240V
0-120V
DC voltage range
0-300V
0-500V
0-400V
0-500V
0-250V
Distance–receiver from transmitter
5,000 ft.
•7
5000 ft.
1000 ft.
•6
Transmitter battery
(4) AA
(8) AA
(1) 9V
(8) D
Receiver battery
(4) AA
(1) 9V
12V
rechargeable
(1) 9V
(1) 9V
(1) 9V
Trace shielded cable
Trace buried metal conduit
1.
2.
3.
4.
5.
6.
10,000 ohms and less–both ends isolated from grounds.
Does not locate the path–has to be predetermined and only in direct burial applications. 5,000,000 and less.
Transmitter connected to metallic shield.
Will trace coax providing the bOnd is in place at the remote end–will disrupt service.
No sorting (high RF bleeds) can trace coax if transmitter connected to braid.
Low frequency locators need a “path to earth” (dirt), 5000 ft. on an open conductor and 2500 ft. on a metallic pipe at 3 ft. deep
TRUSTED
338
SINCE
1862
USA
7. Direct Connection 4,000 ft at 7 ft deep
Inductive Coupler 1,000 ft at 3 ft deep
Inductive Antenna 700 ft at 3 ft deep
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Marker-Mate®
• Designed to locate buried electronic markers, including Omni Marker®, and
Uni Marker™
• Five+ foot depth range
• Detects up to seven different marker types
• Scan mode provides simultaneous detection of all marker types
• User-adjustable Detection Threshold
• Digital signal processor accuracy
• Large-character display is easy to read
• Bar graph, numeric & audible signal strength indicators
• Speaker volume adjust
• Headphone jack
• Battery level indicator
• Low battery warning
• Adjustable time out feature prolongs battery life (and can be turned off)
• Weather resistant
• Rugged construction
SPECIFICATIONS
Electrical:
Twelve AA batteries
Battery Life: 20 hours typical
Environment:
Operating Temperature:
Storage Temperature:
Weather Resistant
Physical:
Length:
Width:
Height:
Weight:
Cat. No.
UPC No.
EML100
60798
-4°F to 122°F (-20°C to 50°C)
-40°F to 158°F (-40°C to 70°C)
30.7 in. (780 mm)
7.8 in. (198 mm)
12.8 in. (325 mm)
4.5 lbs. with batteries (2 kg)
Description
Marker-Mate Electronic Marker Locator
Omni Marker®
• Electronically marks and relocates buried facilities.
• Unique design produces a uniform, spherical RF field in every direction.
• Easily located up to 5' away with any modern marker locator.
• Wider field with a signal peak directly above the marker provides
precise location.
• Requires no particular orientation when buried.
• Greater range than standard 4" ball markers.
• High-reliability design lasts as long as your buried plant.
• Color coded by utility application.
• Patented.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Application
Color
Frequency
Cat no.
Power
Water
Sanitary
Telephone
Gas
Cable TV
Non-Potable/Gen I
Red
Blue
Green
Orange
Yellow
Orange/Black
Purple
169.8kHz
145.7kHz
121.6kHz
101.4kHz
83.0kHz
77.0kHz
66.35kHz
0160-0001-1
0161-0001-1
0162-0001-1
0163-0001-1
0164-0001-1
0165-0001-1
0168-0001-1
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC No.
60765
60766
60767
60768
60769
60770
11050
www.greenlee.com
339
COMMUNICATIONs
Uni Marker™
• Electronically marks buried facilities for later relocation.
• Rugged polyethylene case ensures years of useful life.
• Small size and flat design attach easily to non-metallic utility box lids,
hand holes and other buried enclosures.
• Location is simple with any modern marker locator.
• Range is 25% more than other similar-style markers.
• Signal peak ensures location within inches of the marker.
• Color coded by utility application.
TRUSTED
340
SINCE
1862
Application
Color
Frequency
Cat no.
Power
Water
Red
Blue
169.8kHz
145.7kHz
0170-0001-1
0171-0001-1
60771
60772
Sanitary
Telephone
Gas
Cable TV
Non-Potable/Gen I
Green
Orange
Yellow
Orange/Black
Purple
121.6kHz
101.4kHz
83.0kHz
77.0kHz
66.35kHz
0172-0001-1
0173-0001-1
0174-0001-1
0175-0001-1
0178-0001-1
60773
60774
60775
60776
11059
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
UPC No.
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
COMMUNICATIONS KITS
GripPack Quick-Release Tool Holster
• Easy-on, easy off with new quick-release belt clip.
• Belt clip swivels so the holster moves with you and the
tools stay out of your way.
• Form fitted PVC material ensures that tools don’t fall out even if you drop your kit or they are upside down.
• Molded specifically to hold the following Paladin Tools: Data SureStrip® UTP/
STP & flat satin phone cutter/stripper, Datacomm scissors with serrated
blades & ergonomic handles, Punchdown tool - either the ergonomic
SurePunch® Pro or the original SurePunch® PDT, Mini-MagLite® or
SurePunch® Pro detachable LED, and a Sharpie® marker.
Cat. No.
Description
PA4940
PA4941
PA4942
PA4943
PA4946
PA4940-31
GripPack Quick-Release Tool Holster
GripPack SurePunch® Pro Technician's Kit
GripPack SurePunch® Pro Installer's Kit
GripPack SurePunch® Technician's Kit
GripPack UTP Essentials
Replacement Belt Clip
Grip Pack Kits
PA4945
Description
Model
PA4941
PA4942
PA4943
GripPack Tool Holster
PA4940
✓
✓
✓
PA4946
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1116
✓
✓
✓
Datacomm scissors
PA1931
✓
✓
✓
✓
Reversible 110/66 blade
PA4571
✓
✓
✓
✓
SurePunch® Pro PDT punchdown tool handle
PA3589
✓
✓
SurePunch® PDT punchdown tool handle
PA3570
✓
✓
SurePunch® Pro detachable LED light & batteries
PA4599
✓
MagLite® with 2 AA batteries
N/A
✓
✓
Black Sharpie® pen
N/A
✓
✓
✓
✓
Pro COAX Tool Kit
Designed for the professional CATV cable installer. Offers the convenience
in having six essential tools needed for coaxial repair and installation with
a unique Grip Pack Pouch.
Cat. No.
46601
ups no.
01292
Description
Pro COAX Tool Kit
46601 PRO COAX TOOL Kit Includes
0251-08D
8" Diagonal Cutting Pliers, Dipped Grip
45591
RG59/6/6Q, RG7/11 Coaxial Cable Stripper
PA70020
RG59/6/6Q, RG7/11 Coaxial Cable Crimper
0153-42C
6-in-1 Multi-Tool (Screwdriver/Nut Driver Tool)
0354-14
Combo Ratcheting Closed and Open Ended 7/16" Wrench
FL2AAP
LED Water Resistant Penlight
PA5000
Custom Grip Pack Pouch with Belt Clip
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
341
COMMUNICATIONs
Ultimate Technician Kit
Cat. No.
Description
weight
PA4932
Ultimate Technician Kit
7.2 lbs
PA4932 Ultimate Technician Kit Includes
PA1179
KT8 round cable cutter
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1257
LC-CST CATV “F” coax stripper
PA1923
Untwist tool
PA1927
CATV “F” flaring & attachment tool - RG6/RG6 QS
PA1559
SealTite® Pro compression crimper
PA1556
All-in-One Phone/Data tool
PA3589
SurePunch® Pro punchdown tool
PA4599
SurePunch® Pro detachable LED light
PA4572
110 blade
PA4591
Double 110 blade
PA4573
66 blade
PA4574
BIX blade
PA4575
Krone LSA blade
PA1543
LAN ProNavigator® tester & remote
PA1573
Telephone Test Set & LAN Cable-Check™
PA1902
RJ45 adapter
PA1900
Can wrench
N/A
(10) RJ22 handset plugs
PA9520
(10) RJ11/12 plugs, stranded, flat cable
PA9546
(10) RJ45 plugs, Cat5e, solid, round cable
PA9644
(10) CATV “F” RG6/RG6 QS connectors
PA901074
(2) BNC-to-CATV “F” adapters
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Ultimate Premise Service Kit
This kit is designed for today’s on-the-go LAN professional. It provides
all the tools and testers you need to maintain your data, voice and video
networks all in our Ultimate Tool Bag that’s always ready.
Cat. No.
Description
weight
PA4933
Ultimate Premise Service Kit
6.1 lbs
PA4932 Ultimate Premise Service Kit Includes
PA1179
KT8 round cable cutter
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1257
LC-CST CATV “F” coax stripper
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
PA3589
SurePunch® Pro punchdown tool
PA4572
110 blade
PA4573
66 blade
PA1543
LAN ProNavigator® tester & remote
PA1573
Telephone Test Set & LAN Cable-Check™
PA1902
RJ45 adapter
PA901074
(2) BNC-to-CATV “F” adapters
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Die Sets:
PA2062
Die Sets: RJ11/12 WE/SS-style
PA2687
Die Sets: RJ45 WE/SS-style & RG6/RG6 QS CATV “F”
TRUSTED
342
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Ultimate Coax Compression Tool Kit
This kit is for installing home theaters, HDTV, satellite and digital
cable TV systems. It contains everything needed for new home
construction or retrofitting sophisticated A/V solutions.
Cat. No.
Description
weight
PA4939
Ultimate Coax Compression Tool Kit
8.25 lbs
PA4939 Ultimate COAX compression tool pro Kit Includes
PA1821
AM 35 Slitter
PA1179
KT8 Cutter
PA1119
UTP/Coax Cutter/Stripper
PA1280
CST Pro Coax tool
PA2280
CST Pro GRN Cassette
PA2281
CST Pro OG – Kings & Amphenol BNC
PA2282
CST Pro BK – ADC, Amphenol HDTV BNC
PA2283
CST Pro BL – CATV “F”
PA2284
CST Pro Rollers
PA1927
CATV “F” Flaring & Insertion Tool
PA1557
SealTite® Pro Compression Crimper
PA1907
BNC Extraction Tool
PA1908
CATV “F” Extraction Tool
PA1594
LAN & A/V Cable-Check™ Tester
N/A
Plano® Tackle Box
PA4923
Ultimate Tool Bag
PA9645
(50) SealTite™ CATV “F” – RG59
PA9720
(10) SealTite™ RCA – RGX
PA9730
(10) SealTite™ BNC – RGX
PA906002
(30) Connector & Adapter Assortment Pack
Ultimate DataReady® Pro Kit
If you’re an installer or technician needing a data cable tool kit solution,
this is it. It includes all the tools you need for Cat5, Cat5e and Cat6
installation or maintenance in our rugged Ultimate Tool Bag.
Cat. No.
Description
weight
PA4934
Ultimate DataReady® Pro Kit
5.15 lbs
PA4932 Ultimate Dataready® pro Kit Includes
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1923
Untwist tool
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
PA3589
SurePunch® Pro punchdown tool
PA4599
SurePunch® Pro detachable LED light
PA4571
110/ 66 blade
PA4591
Double 110 blade
PA1543
LAN ProNavigator® tester & remote
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Die Sets:
PA2061
RJ45 WE/SS-style
PA2062
RJ11/12 WE/SS-style
PA2063
RJ22 handset
PA2064
RJ45 AMP-style
PA2067
RJ11 DEC-MMJ
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
343
COMMUNICATIONs
Ultimate Data/Voice Pro Kit
This complete kit is for data and voice installation and maintenance
stored in the new versatile Ultimate Tool Bag.
Cat. No.
Description
weight
PA4935
Ultimate Data/Voice Pro Kit
4.5 lbs
PA4935 Ultimate Data/Voice Pro Kit Includes
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1923
Untwist tool
PA1561
All-in-One Phone/Data tool
PA3589
SurePunch® Pro punchdown tool
PA4572
110 blade
PA4573
66 blade
PA4591
Double 110 blade
PA1573
Telephone Test Set & LAN Cable-Check™
PA1900
Can wrench
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Ultimate Tool Bag
• Main compartment features removable inner tote and 3 additional pockets.
• Removable inner tote with 8 adjustable storage slots keeps
smaller tools handy.
• Detachable shoulder strap with 3 anchor points to carry bag horizontally or
vertically.
• Deep Velcro pockets holds large tools or test equipment.
• Plano® divided tackle box neatly stores dies, blades & connectors.
Fits into all outer pockets.
• Sturdy bottom prevents bag from flopping over when sitting upright.
Cat. No.
Description
weight
PA4923
Ultimate Tool Bag with Plano® tackle box
2.2 lbs
Tools and bits not included
TRUSTED
344
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
SealTite® Pro A/V Kit
The new SealTite® Pro A/V kit is all you need to make custom
length digital and analog audio and component video cables using
compression RCA, BNC and cable TV "F" connectors.
Cat. No.
Description
weight
PA4915
SealTite® Pro A/V Kit
46 oz
Sealtite® PRO A/V Kit IncludeS
Combination UTP/Coax Data SureStrip
PA1119
SealTite Pro Compression Crimper
PA1559
2 sets of color bands for RCA & BNC Connectors
N/A
6 BONUS RG6/RG6 QS Compression Connectors
PA9714
(2) RCA
PA9715
(2) BNC
PA9643
(2) Cable TV “F”
SealTite® Pro Cable TV "F" Kit
Tackle all of your compression crimping jobs with the complete
SealTite® Pro Kit. Includes all the tools you need to prepare the cable
and terminate any compression connector using RG59, RG6 or RG6 Quad
shield cables.
Cat. No.
Description
weight
PA4910
SealTite® Pro Kit
46 oz
Sealtite® Pro Kit Includes
PA1179
KT8 round cable cutter
PA1257
LC CST CATV “F” coax stripper
PA1917
RG6/RG6 Quad shield flaring tool
PA1559
SealTite® Pro compression crimper
N/A
RG6/RG6 Quad SealTite® connectors (10)
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
345
COMMUNICATIONs
CoaxReady™ Compression Tool Kit
Adding to our CoaxReady solutions, this kit has everything you will
need to terminate any manufacturers' cable TV "F", RCA or BNC
compression connectors using RG6, RG6 Quad or RG59 cable sizes.
• 12 piece kit
• Includes zippered cordura portfolio case
Cat. No.
Description
weight
PA906003
CoaxReady™ Compression Tool Kit
3.5 lbs
Coaxready™ COMPRESSION TOOL Kit Includes
PA1821
AM 35 Slitter
PA1179
KT8 Cutter
PA1119
Data & A/V UTP & Coax Cutter/Stripper
PA1280
CST Pro Coax tool
PA2280
CST Pro GRN 3-Level Strip Blade Cartridge
PA2283
CST Pro OG 3-Level Strip Blade Cartridge
PA2282
CST Pro BK 3-Level Strip Blade Cartridge
PA2284
CST Pro Rollers
PA1927
CATV “F” Flaring & Insertion Tool
PA1555
SealTite® Pro Compression Crimper
N/A
Zippered Cordura® Portfolio Case
CoaxReady™ Deluxe Kit
Perfect for LAN/Ethernet or video & CATV installation. For a wide variety
of coaxial connectors including mini-coax and HDTV applications,
CoaxReady™ Deluxe combines our most popular tools for a complete
coax solution in a handy zipper case.
• Kit also includes terminators and adapters
Cat. No.
Description
weight
PA901081
CoaxReady™ Deluxe Kit
3 lbs
Coaxready™ DELUXE Kit Includes
PA1179
KT8 round cable cutter
PA1255
LC CST-58/59 coax stripper
PA1578
SoHo Cable Check™
PA1302
1300 crimp tool frame with EZI-CHANGE™ thumb screws
Die sets:
PA2034
BNC/TNC - RG58/59/62AU
PA2649
BNC/TNC - CATV “F” RG59/6/Belden 8281/1694A and 1505A
PA2653
SMA/SMB/Mini 59 BNC & TNC/Mini-UHF
CoaxReady™ Kit
With this kit a technician is set to tackle most coaxial cabling challenges.
Perfect for the LAN/Ethernet or video installation installer. For a wide
variety of coaxial connectors including mini-coax applications,
CoaxReady™ combines our most popular tools with the new LC CST
coax stripper in a handy zippered case.
Cat. No.
Description
weight
PA901054
CoaxReady™ Kit
2.5 lbs
Coaxready™ Kit Includes
PA1179
PA1255
PA1302
Die sets:
PA2034
PA2075
PA2653
KT8 round cable cutter
LC CST-58/59 coax stripper
1300 crimp tool frame with EZI-CHANGE™ thumb screws
BNC/TNC - RG58/59/62AU
BNC/TNC - RG58/59/62AU RG6 Teflon/Plenum
SMA/SMB/Mini 59 BNC & TNC/Mini-UHF
Teflon® is a registered trademark of Dupont
TRUSTED
346
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Telco Technician Tool Kit
Cat. No.
PA4938
Description
Telco Technician Kit
Weight
7.6 lbs
Broadcastready® pro Kit Includes
PA1116
Data SureStrip® UTP/STP Cutter/Stripper
PA1933
Datacomm Scissors
PA3570
SurePunch® Pro Punchdown Tool
PA4571
110/66 blade
PA4599
SurePunch® Pro Detachable LED Light
N/A
Mini-MagLite®
N/A
Sharpie® Black Marker
PA4940
GripPack Quick Release PDT Holster
PA1561
All-in-One Phone/Data Crimp Tool
PA9655
(50) RJ45 Cat5e Modular Plugs
PA9654
(50) RJ11 Modular Plugs
PA1902
RJ45 Adapter
PA1903
RJ11 Adapter
PA1573
Tone Probe Plus Cable-Check™
TM500
Butt Set
N/A
Plano® Tackle Box
PA4923
Ultimate Tool Bag
BroadcastReady® Kit
The BroadcastReady™ Kit includes professional tools for cutting, stripping,
crimping and testing coaxial cable connections for HDTV, video and RF
communications. Protected by a padded, zipper case. Also includes a
screwdriver to change out die sets.
Cat. No.
Description
weight
PA901083
BroadcastReady® Kit
3 lbs
Broadcastready® pro Kit Includes
PA1179
KT8 round cable cutter
PA1280
CST Pro Coax tool
PA2280
CST Pro GRN – common connectors
PA2281
CST Pro OG – Kings & Amphenol 3-piece
PA2282
CST Pro BK – ADC, Amphenol HDTV
N/A
Screwdriver to change dies
PA1543
LAN ProNavigator® tester & remote
PA1600
1600 Series crimp frame
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
347
COMMUNICATIONs
DataComm Pro Starter Kit Max
This kit is also a starter kit for datacomm professionals.
• 66 piece kit
• Includes the complete solution for cutting, crimping, and terminating
• All the tools included come in a compact zipper case
Cat. No.
Description
weight
PA4908
DataComm Pro Starter Kit
1.8 lbs
Datacomm pro starter Kit Includes
PA1116
Data SureStrip® UTP/STP Cutter/Stripper
PA1931
Datacomm Scissors
PA3570
SurePunch® Pro Punchdown Tool
PA4528
110 Reversible blade
PA1561
All-in-One Phone/Data Crimp Tool
PA9520
(10) RJ45 Cat5e Modular Plugs
PA9654
(50) RJ11 Modular Plugs
N/A
Compact Zipper Case
DataReady™ Pro Kit
A complete data cable installation kit providing everything to support the
installer using commonly-available connectors, and punchdown termination
blocks. All tools contained in a professional-quality, soft-sided zipper case with
heavy-duty wrist strap.
Cat. No.
Description
weight
PA901378
PA9013781
DataReady™ PRO Kit
DataReady™ PRO Kit - Krone*
4 lbs
4 lbs
DataReady™ Pro Kits Include
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1923
Untwist Tool
PA3589
SurePunch® Pro punchdown tool
PA4599
SurePunch® Pro detachable LED light
PA4591
Double 110 blade
PA4571
110/ 66 blade**
PA1543
LAN ProNavigator® UTP/STP continuity tester & remote
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
Die Sets:
PA2061
RJ45 WE/SS-style
PA2062
RJ11/12 WE/SS-style
PA2063
RJ22 handset
PA2064
DRJ45 AMP-style
PA2067
RJ11 DEC-MMJ
* Additional 110 blade included in PA9013781 Kit
** Replaced with Krone blade PA4575 (only with PA9013781 Kit)
TRUSTED
348
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
DataReady™ Kit
The complete Category 5 datacomm tool set in a handy zipper case.
Everything needed for a CAT-5 installation except the cable.
Cat. No.
Description
weight
PA901053
PA9010531
DataReady™ Kit
DataReady™ Kit - AMP/Krone*†
3 lbs
3 lbs
DateReady™ Kits Include
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1561
All-in-One Phone/Data tool*
PA3570
SurePunch® Impact Punchdown Tool
PA4571
110/ 66 blade**
PA1576
Data Link/ID and Cable-Check™ Tester
N/A
(20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable
N/A
Zipper Case with Carrying Strap
* WE/SS - style replaced with AMP - style #1557
* * Contains 110 & Krone blades PA4575 (only with PA9010531 Kit)
Premise Service Kit
Our biggest data, voice, and coaxial LAN installation kit provides everything
for twisted pair and coaxial cable installation. All tools contained in a
professional blow-mold case complete with form-fitting foam.
Cat. No.
Description
weight
PA901039
PA9010391
Premise Service Kit
Premise Service Kit - AMP/Krone*
7.6 lbs
7.6 lbs
Premise Service KitS Include
PA1179
KT8 round cable cutter
PA1257
LC-CST CATV “F” coax stripper*
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
PA3589
SurePunch® Pro punchdown tool
PA4599
SurePunch® Pro detachable LED light
PA4578
110 blade
PA4573
66 blade***
PA1543
LAN ProNavigator® UTP/STP continuity tester & remote
PA1573
Telephone Test Set & LAN Cable-Check™
PA1902
RJ45 8-way adapter
Die Sets:
PA2062
RJ11/12 WE/SS-style**
PA2687
RJ45 WE/SS-style & RG6/RG6 QS CATV “F”**
* Replaced with LC CST-58/59 coax stripper PA1255
** Replaced with RJ45 AMP-style & RG58/59 BNC/TNC dies PA2034, PA2064, PA2065
*** Replaced with BIX or Krone blade #PA4575 (only with PA9010391 Kit)
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
349
COMMUNICATIONs
Network Tool Bundle
This new bundle provides the perfect solution for DIYers that want
to use professional tools or for small contractors just starting out
installing networks. It includes everything you need but the cable to
get the job done.
Cat. No.
Description
weight
PA4909
Network Tool Bundle
18.4 oz
PA4909 Network Tool Bundle Includes
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1561
All-in-One Phone & Data Tool
PA3580
Non-impact 110 punchdown
PA9546
10, RJ45 Cat5e plugs
PA9520
10, RJ11 plugs
TRUSTED
350
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Computer Service Kit
• 3.6V cordless screwdriver, battery & charger.
• ESD wrist strap.
• 30-watt soldering iron.
• Desolderer & soldering aid with pick & scraper/cutter tip.
• Needle nose pliers (2).
• Angled-head lead cutter.
• Insulated tweezers.
• Component gripper & IC extractor.
• 10-piece driver socket set.
• 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted, and SquareHead.
• Socket adapter/extender & socket bit holder/extender.
Cat. No.
Description
weight
PA4370
Computer service kit
4.5 lbs
Cordless Screwdriver & Socket Set
• Adjustable torque up to 21.7in-lbs (2.4 N-m).
• Includes 3.6V rechargeable battery.
• AC adapter/battery charger & bit holder included.
• Forward/reverse direction.
• One-hand operation.
• Handle swings easily from pistol to rod form.
• Includes 14-piece socket set: 6-12 mm; 3/16”-1/2”.
• Includes 26-piece driver bits: 3 slotted, 5 Torx,
3 Phillips, 3 Robertson, 12 hex.
• Accepts 1/4” bits.
SPECIFICATIONS
Weight
1.38 lbs. (.63 kg)
Length
9.52" (242 mm)
Power Requirements 3.6V NiCd battery
Battery Life
Approx. 600 cycles
Charging Time
3-6 hours
AC adapter input
120VAC 50-60Hz
No-load Speed
170 rpm
Motor
3.6VDC
Max. torque
21.7 in-lbs. (2.4 N-m)
* Not for use on precision torque screw requirements.
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
Description
PA4336
PA6000
PA6001
Cordless screwdriver & socket set
Replacement battery)
Battery Charger
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
351
COMMUNICATIONs
TERMINATION
&
TESTING
Voice and Category 5 Data Termination Kit
• Includes the tools and connectors necessary for installing a voice
and data network.
• Durable Cordura® Plus zipper case protects and organizes tools
and ­includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
Cat. No.
45469
UPC No.
45469
Description
Voice and Category 5 Data Termination Kit
45482
45579
46023
46022
45575
45482
45579
46023
46022
45575
45760
45479
45760
45479
Cable Cutter
Kwik Stripper® Twisted Pair Stripper
Punchdown Tool with 110 Blade
66 Style Punchdown Blade
Telephone Ratchet Crimper for 4-, 6- and 8-Position
Modular Plugs
Category 5 Connectors RJ45, 8-Position (Qty. 50)
Zipper Case
Kit Includes:
Category 5 Data Termination and Test Kit
• Includes the tools, connectors and testers necessary for installing
a Cat 5 data network.
• Durable Cordura® Plus zipper case protects and organizes tools
and includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or ­worksite documents.
Cat. No.
45470
UPC No.
45470
Description
Category 5 Data Termination and Test Kit
45482
45579
46023
45575
45482
45579
46023
45575
45760
468T
468R
45485
45760
60379
60380
45485
Cable Cutter
Kwik Stripper® Twisted Pair Stripper
Punchdown Tool with 110 Blade
Telephone Ratchet Crimper for 4-, 6- and 8-Position
Modular Plugs
Category 5 Connectors RJ45, 8-Position (Qty. 50)
Modular Cable Tester Transmitter with Tone Generator
Modular Cable Tester Receiver
Zipper Case
Kit Includes:
TRUSTED
352
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
FIBER
OPTIC
hand
TOOLS
ProGrip 5-in-1 Fiber Optic Stripper
• Precision ground stripping cavities for:
– 2.0 - 2.4 mm outer jacket
– 2.0 - 3.0 mm loose tube
– 2.8 - 3.0 mm outer jacket
– 900 µm buffer insulation
– 900/125 µm and 250/125 µm buffer/acrylate
• Factory calibrated.
Cat. No.
Description
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
ProGrip 3-in-1 Fiber Optic Stripper
• Precision ground stripping cavities for:
– 2.0 mm outer jacket
– 900 µm buffer insulation
– 250 µm buffer/acrylate
• Factory calibrated.
Cat. No.
Description
PA1177
ProGrip 3-in-1 Fiber Optic Stripper
Economy Kevlar® Cutter
• Cut protective Kevlar strands in fiber optic cable.
• Hard-chromed serrated edges to easily cut through Kevlar.
• Comfortable handles with large finger openings.
• 7.75" (197 mm) long
Cat. No.
Description
weight
PA1511
Economy Kevlar Cutter
2 oz
Kevlar is a registered trademark of E.I. Dupont, Inc.
Economy Fiber Optic Stripper
• Pre-calibrated and factory set to ensure precision.
• Bright orange rubber dipped handles.
• Lock closure for safety and transport.
• Tool is for stripping 2.0-3.0 mm Fiber Optic cable, micron-cladded core.
• 5" (127 mm) long
SPECIFICATIONS
Weight
Length
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
3 oz. (86 g)
5" (127 mm)
Cat. No.
Description
weight
PA1162
Economy Fiber Optic Stripper
3 oz
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
353
COMMUNICATIONs
Fiber Products
Pocket Cable Stripper
• Specifically designed for stripping power and telecommunications
cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm).
• Strips solid conductor, stranded conductor and multiple conductor
cables.
• Easy blade depth adjustment.
• Blade rotates for circular, longitudinal and spiral cuts.
cat. no.
1903
13544
13545
13546
upc no.
12679
13544
13545
13546
Description
Cable Stripping Tool
Replacement Blade (2 per package)
Replacement Small Hook
Replacement Large Hook
Fiber Optic Scribe
• Pen-type scribe with screw-in non-reversible carbide tip.
• Wedge shaped tip.
• Pocket-clip.
• Stainless steel barrel.
• 5.25" (197 mm)
Cat. No.
Description
weight
PA1922-1
Fiber Optic Scribe
2 oz
Fiber Optic Polishing Pucks
• Manufactured from aluminum with tungsten coating.
• Cleaner than conventional plastic pucks because less debris left behind.
• Double the lifetime of conventional plastic pucks.
• Length: 7.75" (197 mm)
TRUSTED
354
SINCE
1862
Cat. No.
Description
weight
PA1920-1
PA1926-1
SC, ST, FC Polishing Puck
LC Polishing Puck
2 oz
2 oz
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Fiber Optic Inspection Microscope
• High-powered microscope is used to check a connector’s endface for
excess epoxy, core or cladding chips or other irregularities that degrade
optical ­performance of the connector.
• Laser safety filter protects eyesight.
• Rubber eyecup for comfortable use.
• Rugged aluminum housing.
• 200X magnification.
• Universal adapter works with ST, SC or FC connectors.
• Includes padded nylon carrying case.
Cat. No.
45651
UPC No.
45651
Description
Fiber Optic Inspection Microscope
Connector Cleaning Systems
• Special lint-free fabric-on-a-reel quickly cleans ferrule endfaces of dust,
oil and other contaminants.
• Cleaning system is completely self-contained.
• No need for alcohol.
• A single cleaning reel can be used for over 400 ferrule cleanings.
• ReelCleaner™ can be used on all connector types including MTP and MTRJ.
Cat. No.
948
948/2
945/ESD/1
UPC No.
60692
10792
24053
Description
ReelCleaner™ Connector Cleaning System
Reel Set, 2/Package
Reel Set, 1/Package
Adapter Cleaning Wands
• Specially-created, lint-free materials clean hard-to-reach fiber optic
interfaces, bulkhead adapters and ferrule alignment sleeves.
Cat. No.
946
946K
947
947K
UPC No.
60571
60689
60690
60691
Description
2.5 mm Cleaning Wands, 10/Package
2.5 mm Cleaning Wands, 200/Box
1.25 mm Cleaning Wands, 10/Package
1.25 mm Cleaning Wands, 200/Box
Fiber Optic Consumables Kit
• Contains the most commonly used consumables for epoxy and polish fiber
optic terminations.
Cat. No.
45656
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
UPC No.
45656
Description
Fiber Optic Consumables Kit
www.greenlee.com
355
COMMUNICATIONs
Fiber Products
FIBER OPTIC testing
525-90 PON Optical Loss Test Set
• 1310/1490/1550nm.
• Automated Insertion/Return Loss measurements.
• One button AUTOTEST.
• Stores 1000 measurement results.
• Cable acceptance software for report generation and
fiber optic cable management.
• Optical power meter.
• Optical return loss meter.
• Rechargeable batteries.
• Rugged package for outside plant environment.
Cat. No.
UPC No.
525-90-FC
525-90-SC
SPECIFICATIONS
SPECIFICATIONS
POWER METER
AUTOTEST INSERTION LOSS
Detector Type
Display Range
Calibrated Wavelengths
Absolute Accuracy
Resolution
Measurement Units
SOURCE
InGaAs
+10 dBm to -70 dBm
850, 980, 1300, 1310, 1490, 1550, 1625
<±0.25 dB
0.01 dB
dBm, dB
Center Wavelength
1310 nm ±
30 nm
1490 nm ±
30 nm
1550 nm ±
30 nm
Spectral Width
Output Power
Output Stability
Bulkhead Type
<5
>-10 dBm
<5
>-10 dBm
<5
>-10 dBm
<±0.15 dB/8 hrs
<±0.15 dB/8 hrs
<±0.15 dB/8 hrs
UCI-APC polish adapter 9-125 SM Soc Adapter
See page 368 for available adapters.
TRUSTED
356
Description
00899
00900
SINCE
1862
Test Port
40 dB
Measurement Range
Calibrated Wavelengths
RETURN LOSS
Measurement Range
Accuracy
GENERAL SPECIFICATIONS
Display Type
Fiber Type
Standard Adapter Type
Laser Classification
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
USA
PHONE 800.435.0786
FAX 800.451.2632
PON Optical Loss Test Set (1310/1490/1550 nm)
PON Optical Loss Test Set (1310/1490/1550 nm)
1310, 1490, 1550 nm
10 to 45 dB
.5 dB
Graphics Liquid Crystal with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter options available
Class 1 CFR 1040
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
7.6 x 4.3 x 2.3 in. (19.3 x 10.9 x 5.8 cm)
2.2 lbs. (1.0 kg)
Internal rechargeable NiMH
> 8 hours
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
525-60 Smart Optical Loss Test Set
• Automated bi-directional testing.
• Optical return loss measurements.
• Dual wavelength insertion loss measurements.
• Multi-mode and Single-mode models feature user settable
PASS/FAIL thresholds.
• Communications between units via messaging.
• Wide dynamic range optical power meter.
• Test record storage and data management software.
• Rugged outside plant instrument package.
• Universal connector interface.
Cat. No.
UPC No.
525-60-FC
525-60-SC
525-60-ST
525-60RLAPC-FC
525-60RLAPC-SC
00894
00895
00896
00897
00898
Description
1310/1550 nm Smart Optical Loss Test Set - PC Connectors
1310/1550 nm Smart Optical Loss Test Set - APC Connectors
1310/1550 nm Smart Optical Loss Test Set - APC Connectors
1310/1550 nm Smart Optical Loss Test Set - APC Connectors
1310/1550 nm Smart Optical Loss Test Set - APC Connectors
525-60-XX
525-60RLAPC-XX
Instrument Type
Singlemode Smart Loss Test Set
Singlemode Smart Loss Test Set
Interface
Connector
AUTOTEST
measurements
PC Connector Interface AUTOTEST
performs
Insertion Loss Test and Manual Return
Loss
APC Connector Interface AUTOTEST performs
Insertion and Return
Loss in one Test
Detector Type
Display Range
Calibrated Wavelengths
Absolute Accuracy
Resolution
InGaAs
+10 dBm to -70 dBm
850, 980, 1300, 1310, 1550, 1480, 1625
±0.25 dB
0.01 dB
InGaAs
+10 dBm to -70 dBm
850, 980, 1300, 1310,1550, 1480, 1625
±0.25 dB
0.01 dB
Measurement Units
Adapter Type
dBm, dB, W
UCI-UPC flat polish adapter 9/125SM
dBm, dB, W
UCI-UPC flat polish adapter 9/125SM
1310 nm ±30 nm
<5
>-10 dBm
±0.15 dB
8 hours
1310 nm ±30 nm
<5
>-10 dBm
±0.15 dB
8 hours
SPECIFICATIONS
Power Meter Specifications
Source Specifications
Center Wavelength
Spectral Width
Output Power
Output Stability
1550 nm ±30 nm
<5
>-10 dBm
±0.15 dB
8 hours
1550 nm ±30 nm
<5
>-10 dBm
±0.15 dB
8 hours
Autotest Insertion Loss Specifications
Test Port Measurement Range
Calibrated Wavelengths
40 dB
1310, 1550 nm
40 dB
1310, 1550 nm
10 to 45 dB
.5 dB
10 to 45 dB
.5 dB
Graphics Liquid Crystal with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter
options available
Class 1 CFR 1040
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm
(7.6 x 4.3 x 2.3 in)
1.0 kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
Graphics Liquid Crystal with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter
options available
Class 1 CFR 1040
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm
(7.6 x 4.3 x 2.3 in)
1.0 kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
Return Loss Specifications
Measurement Range
Accuracy
General Descriptions
Display Type
Fiber Type
Standard Adapter Type
Laser Classification
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
357
COMMUNICATIONs
Fiber Products
525-30 Smart Optical Loss Test Set
• Automated dual cable testing.
• Optical return loss measurements.
• Dual wavelength insertion loss measurements.
• Multi-mode and Single-mode models feature user settable
PASS/FAIL thresholds.
• Communications between units via messaging.
• Wide dynamic range optical power meter.
• Test record storage and data management software.
• Rugged outside plant instrument package.
• Universal connector interface.
Cat. No.
525-30-FC
SPECIFICATIONS
Center Wavelength
Spectral Width
Output Power
Output Stability
HOMP
Adapter Type
00891
850/1300nm Smart Optical Loss Test Set - PC Connectors
AUTOTEST INSERTION LOSS
POWER METER
Detector Type
Display Range
Calibrated Wavelengths
Absolute Accuracy
Resolution
Measurement Units
SOURCE
UPC No. Description
InGaAs
+10 dBm to -70 dBm
850, 980, 1300, 1310, 1550, 1480, 1625 nm
<±0.25 dB
0.01 dB
dBm, dB
850 nm ±30 nm
1300 nm ±30 nm
<170
>-21 dBm
<170
>-21 dBm
<±0.10 dB/8 hrs
<±0.10 dB/8 hrs
0.03 dB to 0.80 dB
UCI-APC flat polish adapter 62.5/125 SM
See page 368 for available adapters.
Test Port
Measurement Range
Calibrated Wavelengths
GENERAL SPECIFICATIONS
25 dB
850, 1300 nm
Display Type
Fiber Type
Standard Adapter Type
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
Graphics Liquid Crystal with Backlight
Multimode 62.5/125 um
FC, SC, ST other adapter options available
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
7.6 x 4.3 x 2.3 in. (19.3 x 10.9 x 5.8 cm)
2.2 lbs. (1.0 kg)
Internal rechargeable NiMH
> 8 hours
Fiber Optic Power Meter
• Easy to use - three buttons control all functions.
• Loss measurements in (dB); power measurements in (dBm).
• 0.01 dB measurement resolution.
• Multi-wavelength storage - store and recall reference power levels
for faster, more efficient measurements.
• Snap-On connector interface adapts to FC, SC and ST connectors.
• Long battery life.
• User selectable auto shut-off.
• Rugged and splash-proof.
• Economically priced.
Cat. No.
UPC No.
560XL
1062
T1020
T1030
84485
60575
60576
60577
Description
Fiber Optic Power Meter
SC/PC UCI Adapter
FC/PC SOC Adapter
ST/PC SOC Adapter
SPECIFICATIONS
Optical
Calibration Wavelengths
SPECIFICATIONS
Environmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Power Range
Accuracy
Linearity
+3dBm to -3dBm
-3dBm to -50dBm
-50dBm to -60dBm
Resolution
Power Requirements
Connector interface
TRUSTED
358
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
850 nm, 1300 nm,
1310 nm and 1550 nm
+3 dBm to -60 dBm
± 0.25 dB
±0.5 dB
±0.5 dB
±0.5 dB
0.01 dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
FC, SC or ST Soc Adapter
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Silicon Fiber Optic Power Meter
• Easy to use - three buttons control all functions
• Loss measurements in (dB); power measurements in (dBm)
• 0.01 dB measurement resolution
• Snap on connector interface adapts to FC, SC and ST connectors. Contact
Greenlee for other available adapters.
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Cat. No.
UPC No.
567XL
00025
Description
XL fiberTOOLS - Silicon Fiber Optic Power Meter
SPECIFICATIONS
SPECIFICATIONS
Environmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Optical
Detector Type
Calibration Wavelengths
Power Range
Accuracy
Linearity at:
Resolution
Power Requirements
Connector Interface
3 x 3.5 mm Silicon
635 nm, 780 nm, and 850 nm
+3 dBm to -60 dBm
±0.25 dB
+3 dBm to -3 dBm
±0.5 db
-3 dBm to -50 dBm
±0.05 db
-50 dBm to -60 dBm
±0.5 db
0.01 dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
SOC
High Intensity Fiber Optic Power Meter
• Easy to use - three buttons control all functions
• Multi-Wavelength Storage: Store and recall reference power levels for
faster, more efficient measurements!
• 0.01dB measurement resolution
• Loss measurements in (dB); power measurements in (dBm)
• Snap on connector interface adapts to FC, SC and ST connectors. Contact
Greenlee for other available adapters.
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Cat. No.
UPC No.
568XL
00026
Description
XL fiberTOOLS - High Intensity Optic Power Meter
SPECIFICATIONS
Optical
Detector Type
Calibration Wavelengths
Power Range
SPECIFICATIONS
Environmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Linearity at:
(1310nm and 1550nm)
Absolute Accuracy
Wavelength Dependence
Polarization Dependence
Resolution
Power Requirements
Connector Interface
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
2 mm indium-arsenide (InGaAs)
980 nm, 1310 nm, and 1550 nm
+25 to -30 dBm (1310 nm and 1550 nm);
+25 to -27 dBm measurement range at 980 nm.
To avoid thermal damage, limit exsposure high power
(greater than +23 dBm) to less than
30 minutes.; +25 to -27 dBm (980 nm only)
+25 dBm to +22 dBm
±1.0 dB
+22 dBm to +18 dBm
±0.5 dB
+18 dBm to +10 dBm
±0.2 dB
+10 dBm to -30 dBm
±0.05 dB
±0.25dB at calibration conditions
975 to 985 nm
0.025 dB/nm
1270 to 1330 nm
0.0033 dB/nm
1500 to 1625 nm
0.0016 dB/nm
<0.1 dB
±0.01 dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
SOC
www.greenlee.com
359
COMMUNICATIONs
Fiber Products
850/1300 nm LED Source
• 850/1300 nm wavelengths.
• Stable calibrated output.
• Easy to use.
• Continuous wave and modulated output.
• Fixed connector interface FC, SC or ST.
• Long battery life - approx. 80 hours.
• User selectable auto shut-off.
• Rugged and splash-proof.
• Economically priced.
Cat. No.
UPC No.
570XL-FC
570XL-SC
570XL-ST
84486
84487
84488
Description
850/1300 nm LED source w/FC interface
850/1300 nm LED source w/SC interface
850/1300 nm LED source w/ST interface
SPECIFICATIONS
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Optical
Center Wavelengths
Range (typical)
Max. spectral width
Stability (1 hour)
Typical power output
100/140um
62.5/125um
50/125um
Modulation frequency
Power Requirements
850 nm
840 nm to 880 nm
55 nm
±0.05 dB
1300 nm
1270 nm to 1345 nm
150 nm
±0.05 dB
-13 dBm
-13 dBm
-14 dBm
-20 dBm
-20 dBm
-21 dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
Connector interface
FC, SC or ST
1310/1550 nm Laser Source
FC, SC or ST
• 1310/1550nm wavelengths.
• Stable calibrated output.
• Easy to use.
• Continuous wave and modulated output.
• Fixed connect interface FC, SC or ST.
• Long battery life - approx. 80 hours.
• User selectable auto shut-off.
• Rugged and splash-proof.
• Economically priced.
Cat. No.
UPC No.
580XL-FC
580XL-SC
580XL-ST
84489
84490
84491
Description
1310/1550nm Laser source w/FC interface
1310/1550nm Laser source w/SC interface
1310/1550nm Laser source w/ST interface
SPECIFICATIONS
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
CDRH Laser Class
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Class 1
TRUSTED
360
SINCE
1862
Optical
Center Wavelengths
Range (typical)
Max. spectral width
Stability (1 hour)
Typical power output (9/125)
Minimum
Typical
Modulation frequency
Power Requirements
1310 nm
1280 nm to 1340 nm
<5 nm
±0.05 dB
1550 nm
1520 nm to 1580 nm
<5 nm
±0.05 dB
-8 dBm
-7 dBm
-8 dBm
-7 dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
Connector interface
FC, SC or ST
USA
PHONE 800.435.0786
FAX 800.451.2632
FC, SC or ST
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
650 nm LED Source for Large Core Plastic and Glass Fiber
• 650 nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• ST connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Cat. No.
573XL-ST
573XL-UNIV
UPC No.
00023
00598
Description
650NM LED source w/ST interface
650NM LED source w/UCI interface
SPECIFICATIONS
Optical
Center Wavelength
Range (Typical)
SPECIFICATIONS
ENVIRONMENTAL
Max. Spectral Width (FWHM)
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Stability (1 hour)
Power Output into
MM 200/300 SI Fiber
Modular Frequencies
Power Requirements
Connector Interface
650 nm
630 nm to 670 nm
40 nm
±0.05 dB
-15 dBm ±0.5 dB
270 kHz, 1 kHz and 2 kHz ±0.5 dB
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
ST
1300 nm LED Source with M90 Launch Condition using 62.5/1.25 Fiber
• 850 nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Universal connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Cat. No.
578XL-M90
ACP-108
AST-108
ASC-108
UPC No.
00753
60572
60573
60574
Description
LED Source 1300 NM, 62.5/1.25 Fiber
FC/PC UCI Adapter
ST/PC UCI Adapter
SC/PC UCI Adapter
SPECIFICATIONS
Optical
Center Wavelength
Range (Typical)
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
USA
PHONE 800.435.0786
FAX 800.451.2632
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
1300 nm
150 nm
Max. Spectral Width (FWHM)
<55 nm
Stability (1 hour)
±0.05 dB
Launch Profile
M90
Power Output into MM 62.5/125 -20 dBm
GI fiber
Modular Frequencies
270 kHz, 1 kHz and 2 kHz ±5%
Power Requirements
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
Connector Interface
Universal connector interface, physical
contact (UCI-PC)
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
361
COMMUNICATIONs
Fiber Products
850 nm LED Source with AS-100 Launch Condition using 100/140 Fiber
• 850 nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Universal connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Cat. No.
UPC No.
577XL AS100
ACP-108
AST-108
ASC-108
00029
60572
60573
60574
Description
850 nm LED source w/AS100 Launch
FC/PC UCI Adapter
ST/PC UCI Adapter
SC/PC UCI Adapter
SPECIFICATIONS
Optical
Center Wavelength
Range (Typical)
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Max. Spectral Width (FWHM)
Stability (1 hour)
Launch Profile
Power Output into MM 100/140
GI fiber
Modular Frequencies
Power Requirements
Connector Interface
850 nm
840 nm to 880 nm
<55 nm
±0.05 dB
AS100
-13 dBm ±0.5 dB
270 kHz, 1 kHz and 2 kHz ±5%
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
Universal connector interface, physical contact (UCI-PC)
Multimode Fiber Optic Test Set
• Insertion loss test set for multimode fiber.
• 850/1300 nm loss measurements.
• Connector for FC, SC or ST.
• Rugged package design.
• Easy to use portable package.
• Economically priced.
SPECIFICATIONS
5670-FC Includes:
560xl Optical Power Meter
570xl-fc 850/1300 nm Led Source w/fc Connector
T1020 Fc/pc Soc Adapter
914B Carrying Case
5670-SC Includes:
560xl Optical Power Meter
570xl-sc 850/1300 nm Led Source w/sc Connector
Sc/pc Soc Adapter
914b Carrying Case
5670-ST Includes:
560XL Optical Power Meter
570XL-ST 850/1300 nm LED Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case
TRUSTED
362
SINCE
1862
Cat. No.
UPC No.
5670-FC
5670-SC
5670-ST
84492
84493
84494
USA
PHONE 800.435.0786
FAX 800.451.2632
Description
Multimode Fiber Optic Test Set w/FC interface
Multimode Fiber Optic Test Set w/SC interface
Multimode Fiber Optic Test Set w/ST interface
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
B
= Accessory
= Bare tool
Singlemode Fiber Optic Test Set
• Insertion loss test set for singlemode fiber.
• 1310/1550 nm loss measurements.
• Connector for FC, SC or ST.
• Rugged package design.
• Easy to use portable package.
• Economically priced.
kit SPECIFICATIONS
Cat. No.
UPC No.
5680-FC
5680-SC
5680-ST
84495
84496
84497
Description
Singlemode Fiber Optic Test Set w/FC interface
Singlemode Fiber Optic Test Set w/SC interface
Singlemode Fiber Optic Test Set w/ST interface
5680-FC Includes:
560XL Optical Power Meter
580XL-FC 1310/1550 nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
914B Carrying Case
5680-SC Includes:
560XL Optical Power Meter
580XL-SC 1310/1550 nm Laser Source w/SC Connector
1062 SC/PC SOC Adapter
914B Carrying Case
5680-ST Includes:
560XL Optical Power Meter
580XL-ST 1310/1550 nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case
Multimode and Singlemode Fiber Optic Test Set
• Insertion loss test set for multimode and singlemode fiber.
• 850/1300 nm Loss measurements.
• 1310/1550 nm Loss measurements.
• Connector for FC, SC or ST.
• Rugged package design.
• Easy to use portable package.
• Economically priced.
kit SPECIFICATIONS
5890-FC Includes:
560XL Optical Power Meter
570XL-FC 850/1300 nm LED Source w/FC Connector
580XL-FC 1310/1550 nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
915B Carrying Case
5890-SC Includes:
560XL Optical Power Meter
570XL-SC 850/1300 nm LED Source w/SC Connector
580XL-SC 1310/1550 nm Laser Source w/SC Connector
1062 SC/PC SOC Adapter
915B Carrying Case
5890-ST Includes:
560XL Optical Power Meter
570XL-ST 850/1300 nm LED Source w/ST Connector
580XL-ST 1310/1550 nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
915B Carrying Case
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
Cat. No.
UPC No.
5890-FC
5890-SC
5890-ST
84498
84499
84500
PHONE +1.815.397.7070
FAX +1.815.397.9247
Description
Multimode and Singlemode Fiber Optic Test Set w/FC interface
Multimode and Singlemode Fiber Optic Test Set w/SC interface
Multimode and Singlemode Fiber Optic Test Set w/ST interface
www.greenlee.com
363
COMMUNICATIONs
Fiber Products
Visual Fault Finder
• Continuous wave output mode for steady fault location.
• Find breaks to 5km.
• Blinking output mode increases viewing contrast.
• Easy to use quick interface fits all 2.5mm connector interfaces (FC, SC, ST).
• 1.0mW output power.
• Ergonomic rotary switch permits easy one-handed operation.
• Rugged, compact and splash-proof aluminum design.
• Two AA batteries provide 48 hours continuous operation.
• Nylon belt holster included.
SPECIFICATIONS
Optical
Light source type
Center wavelength
Nominal
Range (typical)
Spectral width (FWHM)
Typical output power
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CDRH Laser Class:
CE
635 nm red laser diode
-10° C to +50° C
-40° C to +60° C
0 to 95% non-condensing
Length: 22 cm (9.0 in.);
Diameter: 2.54 cm (1 in.)
200 g (7 oz.)
Class IIIa
IEC 60-1-2 portion of the EN50082-1 ESD
immunity requirement EN50082-1:
1992 IEC 801-2, -3, -4
635 nm
630 nm to 640 nm
<2 nm
1.0 mW (0dBm) into Single Mode (SMF-28) fiber
Blink frequency in
MOD mode
<3hz approximate)
Power Requirements
Two AA size 1.5V batteries
(Battery life Approx. 48 hours continuous operation)
Connector interface
Standard “Quick Connect” universal
2.5 mm receptacle
Cat. No.
170XL
UPC No.
84501
Description
Visual Fault Finder
SensoLITE™ Light Detector
• Detects visible and invisible light wavelengths (630 nm to 1600 nm)
• Saves time and eliminates guesswork
• Simple, durable, and easy to use
• Works with bare and connectorized fibers
• Accepts all fiber and most connector types
• Wide sensitivity range: from -55 dBm to +25 dBm
• Presence of light indicated by an audible signal and an illuminated front
panel LED
• Unique design permits testing in bright ambient light conditions
• Long battery life—up to one year of normal use
• Low battery indicator
• Replaceable light blocking curtain
SPECIFICATIONS
Promotes workplace safety – can help prevent accidental eye exposure
to hazardous laser radiation when used as directed
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
-15° C to +55° C
-25° C to +70° C
0 to 90% RH, non-condensing
14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.)
120 g (4.2 oz.) with batteries
Optical
Center Wavelength
Detector
Optical Interface
Sensitivity
630nm
850nm
1300nm
1550nm
Power Requirements
510XL
TRUSTED
364
SINCE
1862
< -40 dBm
< -55 dBm
< -55 dBm
< -55 dBm
Output Indicators
Light > -40dBm
Battery test
Cat. No.
USA
630 nm to 1600 nm
PIN-type germanium
Direct connection to bare or connectorized fibers; No specialized adapters required
UPC No.
00024
PHONE 800.435.0786
FAX 800.451.2632
Amber LED/audible signal
Green LED
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
Description
Visual Fault Finder
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
920xc Handheld Multimode OTDR
• Economical.
• Compact handheld design.
• Easy to use.
• Fast automated testing.
• Up to 22 db dynamic range.
• Large backlight LCD display.
• Measure length and defects of coiled fiber.
• Fiber analysis software for data management and report generation.
• RS-232/USB interface.
• NiMH batteries for 8 hours continuous use.
MULTIMODE specifications
Fiber Type
920XC-20M
Wavelength (± 20nm)
Dynamic Range (dB)
Event deadzone (m)
Attenuation Deadzone (m)
Emitter Type
Pulsewidth (ns)
Selectable Ranges (km)
Average Time
850
18
7
20
LED
12/30/100/275/1us
0.1/0.3/0.5/1.3/2.5/5/10
15s/30s/1 min/2 min/3 min
Distance measurement accuracy
Connector Type
Fiber Analysis Software
Reflection detect accuracy
Attenuation detect accuracy
Measurement data storage
±(1m + 5 X 105 x distance + sampling space)
PC (interchangeable FC, SC, ST)
Data transmission
General
Power Supply
Battery Life
Operating Temperature
Storage Temperature
Relative Humidity
Weight
Dimensions
RS-232/USB port
Cat. No.
PHONE 866.384.8813
FAX 800.524.2853
INT’L
NiMH chargeable battery/AC adapter
Support over 8 hours operating on one charge or over 20 hours standby
-10° to 50° C
-20° to 60° C
0 to 95% (non-condensing)
1.9 lbs. (0.87 kg)
7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm)
UPC No.
Description
Handheld OTDR, 850/1300 nm, FC/PC
Handheld OTDR, 850/1300 nm, SC/PC
Handheld OTDR, 850/1300 nm, ST/PC
946
948
60571
60692
Cleaning Wand 10/PK
REEL Cleener CONN Cleaner (948)
20988
20989
20988
Soft Carrying Case
20989
20990
USB Cable for OTDR
RS-232 Cable
1155-0526
20996
20997
20998
25691
25692
20999
10582
Power Supply Universal
Quick Reference Guide - UN NiMH Battery (9.6V)
Car Adapter
920XC-SM-MM
26307
OTDR Kit - Single and Multimode OTDR Kit.
20999
CANADA
±4 dB
±0.05 dB/dB
1,000 test curves
25688
25689
25690
20990
PHONE 800.435.0786
FAX 800.451.2632
30/100/275/1us/2us
0.1/0.3/0.5/1.3/2.5/5/10/20/40/80
920XC-20M PC FC
920XC-20M PC SC
920XC-20M PC ST
AC-CONN-FC-L2
AC-CONN-ST-L2
AC-CONN-SC-L2
AC-ADPT-20-UNIV
920XC-QR
USA
1300
22
PHONE +1.815.397.7070
FAX +1.815.397.9247
FC Connector (for UPC & APC)
ST Connector (for UPC only) SC Connector (for UPC & APC)
www.greenlee.com
365
COMMUNICATIONs
Fiber Products
920xc Handheld Singlemode OTDR
Cat. No.
UPC No.
920XC-20C UPC SC
Handheld OTDR, 1310/1550 nm, SC/UPC
920XC-20C UPC FC
920XC-20C UPC ST
920XC-20C APC SC
920XC-20C APC FC
920XC-30P UPC SC
920XC-30P UPC FC
920XC-30P UPC ST
920XC-30P APC SC
920XC-30P APC FC
920XC-30F UPC SC
920XC-30F UPC FC
89872
920XC-30F UPC ST
19251
920XC-30F APC SC
920XC-30F APC FC
19249
19250
Handheld OTDR, 1310/1550 nm, FC/UPC
Handheld OTDR, 1310/1550 nm, ST/UPC
Handheld OTDR, 1310/1550 nm, SC/APC
Handheld OTDR, 1310/1550 nm, FC/APC
Handheld OTDR, 1310/1490/1550 nm, SC/UPC
Handheld OTDR, 1310/1490/1550 nm, FC/UPC
Handheld OTDR, 1310/1490/1550 nm, ST/UPC
Handheld OTDR, 1310/1490/1550 nm, SC/APC
Handheld OTDR, 1310/1490/1550 nm, FC/APC
Handheld OTDR, 1310/1550/1625 nm, SC/UPC
Handheld OTDR, 1310/1550/1625 nm, FC/UPC
Handheld OTDR, 1310/1550/1625 nm, ST/UPC
Handheld OTDR, 1310/1550/1625 nm, SC/APC
Handheld OTDR, 1310/1550/1625 nm, FC/APC
946
948
60571
60692
Cleaning Wand 10/PK
REEL Cleener CONN Cleaner (948)
20988
20989
20988
Soft Carrying Case
20989
20990
RS-232 Cable
89877
89892
89887
19237
19238
19239
19240
19252
19247
19248
20990
• Up to 38 db dynamic range.
• Large backlight LCD display.
• Measure length and defects of coiled fiber.
• Fiber analysis software for data
management and report generation.
• 1625 nm operation for live fiver testing.
• RS-232/USB interface.
Description
89882
AC-CONN-FC-L2
AC-CONN-ST-L2
AC-CONN-SC-L2
AC-ADPT-20-UNIV
920XC-QR
1155-0526
20996
20997
20998
25691
25692
20999
10582
920XC-SM-MM
26307
20999
USB Cable for OTDR
FC Connector (for UPC & APC)
ST Connector (for UPC only) SC Connector (for UPC & APC)
Power Supply Universal
Quick Reference Guide - UN NiMH Battery (9.6V)
Car Adapter
OTDR Kit - Single and Multimode OTDR Kit.
SINGLEMODE specifications
Fiber Type
Wavelength (± 20nm)
Dynamic Range (dB)
Event deadzone (m)
Attenuation Deadzone (m)
Emitter Type
Pulsewidth (ns)
Selectable Ranges (km)
Average Time
Distance measurement accuracy
Connector Type
920XC-20C
920XC-30F
1310/1550
35
2.5
14
920XC-30P
1310/1550/1625
38
1.5
10
1310/1490/1550
38
2.5
14
Laser
5, 10, 30, 100, 300, 1 us, 2.5 us, 10 us, 20 us
0.3/1.3/2.5/5/10/20/40/80/120/160/240
15s/30s/1 min/2 min/3 min
±(1m + 5 X 105 x distance + sampling space)
PC or APC (interchangeable FC, SC, ST)
Visual Fault Locator
Wavelength
Peak power output
Connector interface
650 nm
3 mw
(interchangeable FC, SC, ST)
n/a
n/a
n/a
Fiber Analysis Software
Reflection detect accuracy
Attenuation detect accuracy
Measurement data storage
Data transmission
±4 dB
±0.05 dB/dB
1,000 test curves
RS-232/USB port
General
Power Supply
Battery Life
Operating Temperature
Storage Temperature
Relative Humidity
Weight
Dimensions
NiMH chargeable battery/AC adapter
Support over 8 hours operating on one charge or over 20 hours standby
-10° to 50° C
-20° to 60° C
0 to 95% (non-condensing)
1.9 lbs. (0.87 kg)
7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm)
TRUSTED
366
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
Optical Fiber Monitors
OFM1020
• mm Resolution.
• Zero Deadzone.
• 90dB Return loss dynamic range.
• 850/1300 nm operation.
• Measure optical components, cables and sensors.
• Monitor bend loss and fiber stress.
• Universal optical interface.
• Ruggedized for field deployment.
• AC/DC operation.
• Custom configurations available (fiber, outputs, wavelengths).
OFM1020
OFM130
• mm Resolution.
• Zero Deadzone.
• 85dB Return loss dynamic range.
• 1310/1490/1550/1625 nm operation.
• Measure optical components, cables and sensors.
• Analyze optical amplifiers.
• Monitor bend loss and fiber stress.
• Custom configurations available (fiber, outputs, wavelengths).
Cat. No.
UPC No.
Description
Please consult with a customer service representative
for ordering details.
OFM130
specifications
Fiber Type
Distance
OFM1020
Range
Accuracy
Single Point Resolution
Two Point Resolution
OFM130
0-20 km (65,000 ft.)
0.02% + 2.5cm (1")
5 mm (0.2")
10 cm (4")
Deadzone
Event
Attenuation
12 cm typical (5")
38 cm typical (15")
Return Loss
Dynamic Range
Accuracy
90dB
±1.0dB
Insertion loss, fresnel
Dynamic Range
Accuracy
40dB
±0.3dB
Insertion loss, rayleigh
Dynamic Range
Accuracy
20dB
±0.02 dB
Wavelength
Accuracy
40 nm
Spectral Width
20 nm
Mechanical
Size
Weight
36 cm x 48 cm x 20 cm
(14.2"x18.9"x7.9")
11 kg (24 lb.)
35 cm x 39 cm x 20 cm
(13.8"x15.3"x7.9")
9.5 kg (21 lb.)
Power
AC
DC
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
24V
110/220V, 60/400Hz
n/a
www.greenlee.com
367
COMMUNICATIONs
Fiber Products
Fiber Optic Instrument Adapters – SOC and UCI
• Our SOC and UCI adapters provide direct connectivity for
Tempo fiberTOOLS® to a wide range of industry-standard fiber
optic ­connectors.
• Adapter design ensures maximum accuracy and repeatability
when performing critical measurements on fiber optic systems.
• Easy to clean and use.
• Single-mode and multimode compatible.
• SOC adapters are compatible with both PC and Angled APC
physical contact interfaces.
• UCI adapters feature durable phosphor bronze alignment sleeve.
• SOC (Snap-On Connector) adapter is used on all power meters
and 250 “B” series LED Sources.
• UCI (Universal Connector Interface) adapter is used on all 250/260
“A” Series Sources and 330 Series Variable Optical Attenuators.
Fiber Optic Instrument Adapters – SOC and UCI
Connector Type
SOC Adapter
Description
x
UCI Adapter
Cat. no.
upc no.
Cat. no.
1.25 mm Quick-Connect Universal Adapter
(LC, MU, etc.)
T1026
60588
2.5 mm SOC Quick-Connect Adapter
(E2000, FC, SC, ST, etc.)
T1025
60587
AU-250
60703
E-2000
T10E2
60599
AE2-10
60698
FC
T1020
60576
APC-108
60572
HMS-10/HP
T1040
60590
AHP-10
60699
LC
T10LC
60600
Use Hybrid Cable * or FoPro®_x
MIL-T-29504/4 & /5 Termini
T1038
60589
Use Hybrid Cable * or FoPro®_x
MT-RJ
T13A2
60605Æ
SC
1062
60575
ASC-108
60574
SMA 905/906
T1087
60596
ASM-90
60702
ST
T1030
60577
ATS-108
60573
TOSLINK – Simplex
T10TB
60602
Use Hybrid Cable Only *
TOSLINK – Duplex (Set of 2)
T10TD
60603
Use Hybrid Cable Only *
Versatile Link – V/Z PIN
T10ZP
60604
Use Hybrid Cable Only*
Use Hybrid Cable Only *
Use Hybrid Cable Only *
FoPro ferrule options include 2.5 mm, 1.57 mm (MIL-style 16AWG optical contacts) and 1.25 mm.
When using a Hybrid Adapter Cable, the instrument UCI adapter and one end of the Hybrid
Adapter Cable should be a commonly available connector type. (i.e. FC, SC or ST)
90SOC (60687)
*
TRUSTED
368
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
upc no.
SOC adapter tool for
easy installation and
removal of SOC adapters
from instrument interfaces.
(Product shown may vary)
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
= new product
= Replacement Part
= Accessory
B
= Bare tool
FIBER OPTIC kits
Fiber Optic Termination Kit
• Contains all of the tools and consumable materials necessary for epoxy and
polish connector terminations.
• Durable Cordura® Plus carrying case protects and organizes tools
and ­includes see-through pouches for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
Cat. No.
UPC No.
Description
45658
45658
Fiber Optic Termination Kit
Kit contents may be purchased separately:
45586
45586
Fiber Optic Kevlar® Shears
1955A
06857
Pro-Plus Wire Stripper, 10-18 AWG
45637
45637
Kwik Cycle® 8" Crimp Frame with 0.151", 0.178", 0.213"
Hex Cavities
45651
45651
Fiber Optic Inspection Microscope
45639
45639
Carrying Case
Kit includes the following consumable items which are not sold separately:
50 Sheets Polishing Paper, 0.3 micron
100 Lint-free Wipes
50 Sheets Polishing Paper, 1 micron
10 Alcohol Wipes
50 Sheets Polishing Paper, 5 micron
1 Alcohol Bottle
10 ml (0.34 oz.) Opticure Adhesive
1 Water Bottle
26 ml (0.9 oz.) Opticure Primer
1 Fiber Debris Disposal Container
1 Pair Safety Glasses
10 Syringes
1 Plastic Utility Box
10 Needle Tips
1 Felt-tipped Marker
Ultimate Fiber Tool Kit
This Ultimate Kit contains all the slitters, strippers, and Kevlar® cutters you
will need to start your fiber optic terminations. Also included is the premium
1600 Series Crimper with 3 interchangeable dies. The Ultimate Tool Bag has
plenty of room for you to add your consumables.
Cat. No.
Description
weight
PA4924
Ultimate Fiber Tool Kit
5.65 lbs
Ultimate fiber tool Kit Includes
PA1511
Kevlar® Cutter
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
PA1162
Economy Fiber Optic Stripper
PA1161
Adjustable Jacket Stripper
PA1820
AM 25 Slitter
PA1821
AM 35 Slitter
PA1258
LC CST-mini Stripper
PA1600
1600 Series Crimp Frame
PA2044
STII Type Die Set
PA2664
SMA/SMB/FC/BICONIC Die Set
PA2668
SC & ST Die Set
PA1922-1
Fiber Optic Scribe
PA1920-1
SC/ST/FC Polishing Puck
PA1926-1
LC Polishing Puck
N/A
Plano® Tackle Box
PA4923
Ultimate Tool Bag
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
www.greenlee.com
369
COMMUNICATIONs
Fiber Products
FiberReady Tool Kit
This kit contains an assortment of cable sliters, strippers and Kevlar®
cutters to prep fiber optic cable along with our 1600 Series premium
crimper with interchangeable dies.
Cat. No.
Description
weight
PA906001
FiberReady Tool Kit
3.1 lbs
FIBERREADY Tool Kit Includes
PA1511
Kevlar® Cutter
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
PA1822
Universal Cable Stripper
PA1600
1600 Series Crimp Frame
PA2044
STII Type Die Set
PA2664
SMA/SMB/FC/BICONIC Die Set
PA2668
SC & ST Die Set
N/A
Zippered Portfolio Case with Handles
Kevlar is a registered trademark of E.I. Dupont, Inc.
TRUSTED
370
SINCE
1862
USA
PHONE 800.435.0786
FAX 800.451.2632
CANADA
PHONE 866.384.8813
FAX 800.524.2853
INT’L
PHONE +1.815.397.7070
FAX +1.815.397.9247
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement