Series 90 -30 PLCs ™

Series 90 -30 PLCs ™
Series 90 -30 PLCs
™
The Series 90™-30 PLC is a family of controllers, I/O systems and specialty modules designed to meet the demand for
versatile industrial solutions. With its single overall control architecture, the Series 90-30 has been the PLC of record
in over 200,000 applications, such as high-speed packaging, material handling, complex motion control, water treatment,
continuous emissions monitoring, mining, food processing, elevator control, injection molding and many more.
Thanks to its modular design, the
Series 90-30 offers unmatched
versatility. Configure just the system
you need, saving critical space and
reducing cost.
With over 100 I/O modules, the Series
90-30 PLC can be adapted to a wide
range of applications.
• Digital interfaces for push buttons, switches, proximity
sensors, relays, contactors and many other devices
• Analog modules with varying degrees of resolution for
flow, temperature or pressure applications
• Direct connect wiring or remote termination
• Local or remote I/O systems
Series 90-30 Ethernet communications provide a realtime link between the plant floor and the boardroom. You
can begin with an Ethernet-enabled CPU, or at a later date,
choose from our selection of rack-mounted Ethernet modules. The Series 90-30 Ethernet module supports both
SRTP and Modbus TCP/IP application protocols.
The scaleable processing power in the Series 90-30
CPU creates a clear upgrade path. Create the system that’s
ideal today, while leaving open the option of creating a
more powerful system tomorrow — without having to
change your application software.
Motion control integrated into the Series 90-30
fosters high performance point-to-point applications.
A variety of Series 90-30 field bus interfaces enables
distributed control and/or I/O. Choose from Ethernet EGD,
Profibus-DP™, Genius®, DeviceNet™ and Interbus-S™ modules.
Field Bus interface modules are easy to install and quick to
configure. Plug them into an existing system or design a
new system around them.
Programming your Series 90-30 PLC is easy with
CIMPLICITY Machine Edition Logic Developer-PLC.
With the most advanced PLC programming tools on the
market today, Logic Developer-PLC is an integrated solution
for PLC and remote I/O hardware configuration, PLC programming languages, application development, and on-line
diagnostics. Supported programming languages include
Ladder Diagram (LD), Instruction List (IL), Structural Text
(ST), and C Block.
The Series 90-30 stands out among small controls for
offering redundancy options. The Series 90-30 is the
low-cost solution for high availability applications, with
redundant CPUs and power supplies.
Easy trouble shooting and machine setup using a
handheld PDA. CIMPLICITY® Machine Edition Logic
Developer PDA software allows you to interface a Palm®
handheld device to your Series 90-30 controller. With Logic
Developer PDA, you can monitor/change data, view diagnostics, force ON/OFF, and configure machine setup —
saving you time and increasing productivity.
Ordering Information
Catalog Number
IC693MDL230
IC693MDL231
IC693MDL240
IC693MDL241
IC693MDL632
IC693MDL634
IC693MDL645
IC693MDL310
IC693MDL330
IC693MDL340
IC693MDL390
IC693MDL730
IC693MDL731
IC693MDL732
IC693MDL733
IC693MDL734
IC693MDL930
IC693MDL931
IC693MDR390
Description
Catalog Number
Description
120 VAC Isolated Input (8 Points)
240 VAC Isolated Input (8 Points)
120 VAC Input (16 Points)
24 VAC/VDC Input (16 Points)
125 VDC Input (8 Points)
24 VDC Input, Neg/Pos Logic (8 Points)
24 VDC Input, Neg/Pos Logic (16 Points)
120 VAC Output, 0.5 Amp (12 Points)
120/240 VAC Output, 2 Amp (8 Points)
120 VAC Output, 0.5 Amp (16 Points)
120/240 VAC Isolated Output, 2 Amp (5 Points)
12/24 VDC Output, 2 Amp, Positive Logic (8 Points)
12/24 VDC Output, 2 Amp, Negative Logic (8 Points)
12/24 VDC Output, 0.5 Amp, Positive Logic (8 Points)
12/24 VDC Output, 0.5 Amp, Negative Logic (8 Points)
125 VDC Output, (6 Points)
Relay Output, Isolated, 4 Amp (8 Points)
Relay Output, 8 Amp Form B/C contacts, Isolated in 2 Groups of 4 (8 Points)
Mixed I/O, 24 VDC Input (8 points), Relay Output (8 points)
IC693MDL646
IC693MDL648
IC693MDL653
IC693MDL654
IC693MDL655
IC693ACC300
24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points)
48 VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 Points)
24 VDC Input, Neg/Pos Logic, 2msec Filter (32 Points)
5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points)
24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points)
Input Simulator Module (8 Points)
IC693MDL740
IC693MDL741
IC693MDL742
IC693MDL748
IC693MDL750
IC693MDL751
IC693MDL752
IC693MDL753
12/24 VDC Output, 0.5 Amp, Positive Logic (16 Points)
12/24 VDC Output, 0.5 Amp, Negative Logic (16 Points)
12/24 VDC Output, 1 Amp, Positive Logic (16 Points), Fused
48 VDC Output, 0.5 Amps, Positive Logic (8 Points)
12/24 VDC Output, Negative Logic (32 Points)
12/24 VDC Output, Positive Logic (32 Points)
5/12/24 VDC (TTL) Output, Negative Logic, (32 Points)
12/24 VDC Output, Positive Logic (32 Points)
IC693MDL940
Relay Output, 2 Amp (16 Points)
IC693MAR590
Mixed I/O, 120 VAC Input (8 Points), Relay Output (8 Points)
IC693ALG220
IC693ALG221
IC693ALG390
IC693ALG391
IC693ALG442
Analog Input, Voltage/Current, 4 Channels
Analog Input, Current, 4 Channels
Analog Output, Voltage, 2 Channels
Analog Output, Current, 2 Channels
Analog Combo Module 4IN/2OUT
IC693ALG222
IC693ALG223
IC693ALG392
Analog Input, Voltage 16 Single/8 Differential Channels
Analog Input, Current, 16 Single Channels
High Density Analog Output (8 Channels)
High Speed Counter (HSC)
Axis Positioning Module (APM), 1 Axis
Axis Positioning Module (APM), 2 Axis
Solenoid Valve Output (11 Points)/24 VDC Output, 0.5 Amp, Positive Logic (5 Points)
Programmable Coprocessor Module, 192 KB (47 KB Basic or C Program), 2 Serial Ports
Programmable Coprocessor Module, 640 KB (640 KB Basic or C Program), 2 Serial Ports
Power Transducer Module, CT and PT Interface 120/240 VAC (0.5m Cable)
Genius Bus Controller (Supports I/O and Datagrams)
Communication Module, Genius (1 Kbyte) GCM+ (No Datagram Support)
Communications Module, CCM, RTU, SNP, and SNPx Protocols
Ethernet Interface TCP/IP Module, 10Mbs (Supports SRTP and Modbus TCP/IP, No EGD)
Ethernet Network Interface Unit. Two Ethernet ports, one connection (one IP) with
built in switch. Requires IC693CHS397 (5 slot rack) or IC693CHS391 (10 slot rack)
and a Series 90-30 high capacity power supply.
IC693APU305
IC693DSM302
IC693DSM314
IC693PTM101
IC693TCM302
IC693TCM303
High Speed Counter with Gray Code Encoder or an A QUAD B Encoder Input
Digital Servo Motion Controller, 2 Axis
Digital Servo Motion Controller, 1-2 Axis of Digital Servo or 1-4 Axis Analog Servo
Power Transducer Module, CT and PT Interface 120/240 VAC (1m cable)
Temperature Control Module, (8) TC In and (8) 24 VDC Solid State Outputs
Temperature Control Module Extended Temperature Range, (8) TC In and
(8) 24 VDC Solid State Outputs
Profibus DP Master Module
Profibus DP Slave Module
DeviceNet Master Module
DeviceNet Slave Module
Remote I/O
IC693APU300
IC693APU301
IC693APU302
IC693MDL760
IC693PCM301
IC693PCM311
IC693PTM100
IC693BEM331
IC693CMM302
IC693CMM311
IC693CMM321
IC693NIU004
Controllers
IC693CPU311
5-Slot Base with CPU in Base (6KBytes User Program), Not Expandable
IC693CPU360
IC693CPU313
5-Slot Base with Turbo CPU in Base (Logic Execution is .6 msec), 1K Registers,
(12KBytes User Program), Not Expandable
10-Slot Base with Turbo CPU in Base (Logic Execution is .6 msec) 12Kbytes
IC693CPU363
Discrete Input Modules
Discrete Output Modules
Relay Output Modules
Mixed Discrete Modules
Analog Input Modules
Analog Output Modules
Mixed Analog Modules
Motion Modules
Specialty Modules
Communications Modules
IC693CPU323
Backplanes
Power Supplies
Accessories
Programming and
Trouble Shooting Tools
IC693PBM200
IC693PBM201
IC693DNM200
IC693DNS201
IC693CPU364
IC693CPU350
User Program, Not Expandable
CPU 350 Module (32KBytes User Memory, 4K I/O, 8 Racks), No Built-In Serial Ports, IC693CPU374
Logic Execution is .22msec/K
IC693CHS391
IC693CHS392
IC693CHS393
IC693PWR321
IC693PWR322
IC693PWR328
IC693PWR330
IC693PWR331
IC693ACC301
IC693ACC302
IC200ACC003
IC693ACC310
IC693CBL300
IC646MPP001
IC646MPS001
Base, CPU, 10 Slots, Use with CPU331/CSE331 and above
Base, Expansion, 10 Slots
Base, Remote Expansion, 10 Slots (700 ft.)
Power Supply, 120/240 VAC, 125 VDC, Standard, 30 Watts
Power Supply, 24/48 VDC, Standard, 30 Watts
Power Supply, 48 VDC, Standard, 30 Watts
Power Supply, 120/240 VAC, 125 VDC, High Capacity, 30 Watts
Power Supply, 24 VDC, High Capacity, 30 Watts
Replacement Battery, CPU & PCM (Qty. 2)
High Capacity Battery Pack
EZ Program Store Flash Device (for CPU374 only)
Filler Module, Blank Slot
Rack to Rack Expansion Cable, 1 Meter
Logic Developer - PLC Professional
Logic Developer - PLC Standard
IC693CHS397
IC693CHS398
IC693CHS399
IC693PWR332
IC693ACC340
IC693ACC341
IC693ACC350
IC693CBL301
IC693CBL302
IC693CBL312
IC693CBL313
IC693CBL314
IC646MPH101
CPU 360 Module (240KBytes Configurable User Memory, 4K I/O, 8 Racks),
No Built-In Serial Ports, Logic Execution is .22msec/K
CPU 363 Module (240KBytes Configurable User Memory 4K I/O, 8 Racks),
2 Built-In Serial Ports, Logic Execution is .22msec/K
CPU 364 Module (240KBytes Configurable User Memory 4K I/O, 8 Racks), No Built-In Serial Ports,
Built-In 10Mbs Ethernet, Supports SRTP, Channels and EGD, Logic Execution is .22msec/K
CPU 374 Module (240KBytes Configurable User Memory), No Built-In Serial Ports,
Built-In 10/100Mbs with Built-In Switch, Ethernet Supports SRTP, EGD and No Channel
Support; Logic Execution is .22msec/K.
Base, CPU, 5 Slots (use with CPU331/CSE331 and above)
Base, Expansion, 5 Slots
Base, Remote Expansion, 5 Slots (700 ft.)
Power Supply, 12 VDC, High Capacity, 30 Watts
Redundant Power Supply Base (RPSB) with 0.1 meter cable to connect to Power Supply Adapter Module
Redundant Power Supply Base with 0.5 meter cable to connect to Power Supply Adapter Module
Redundant Power Supply Adapter (RPSA) Module. The RPSA replaces the power supply
on a CPU base or expansion base and connects to a Redundant Power Supply Base.
Rack to Rack Expansion Cable, 2 Meters
Rack to Rack Expansion Cable, 15 Meters
Rack to Rack Expansion Cable, 0.15 Meters, Shielded
Rack to Rack Expansion Cable, 8 Meters
Rack to Rack Expansion Cable, 15 Meters, Shielded
Logic Developer PDA Software Tool with Cable Adapter
GE Fanuc Automation Information Centers
Additional Resources
USA and the Americas: 1-800-GE FANUC
or (434) 978-5100
For detailed technical specifications and product
ordering information, please visit the GE Fanuc
e-catalog at:
Europe, Middle East and Africa: (352) 727979-1
Asia Pacific: 86-21-3222-4555
www.gefanuc.com
© 2004 GE Fanuc Automation, Inc. All Rights Reserved. Series 90, VersaPro and LogicMaster are trademarks and Genius is a registered trademark
of GE Fanuc Automation, Inc. Profibus-DP is a trademark of Profibus International. DeviceNet is a trademark of the Open DeviceNet Vendor
Association, Inc. Interbus-S is a trademark of Phoenix Contact. Windows is a registered trademark of Microsoft Corporation. State Logic is a
registered trademark of Adatek, Inc. Palm is a trademark of Palm, Inc.
GFA-148K
01/04 10M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement