VANITY TOP INSTALLATION

VANITY TOP INSTALLATION
VANITY TOP INSTALLATION
Before installing, read entire Vanity Top Installation Instructions. Observe all local building and safety codes.
For the following installation instructions for your new vanity top it is assumed that any old fixtures have been removed.
Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service
at 1-866-855-2284. If you need assistance or have questions while installing your vanity top, contact Customer Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures. Signature Hardware
accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation
Important: If the vanity top weighs 50 lbs. or more, have someone assist you. Never lift or carry the vanity top flat.
TOOLS AND MATERIALS:
Adhesive Silicone Sealant
Level
Silicone Sealant
Wood Shims
Damp Cloth
1. Lift the vanity top from the front edge, bringing to a vertical position,
while keeping the back edge in the box.
2. Remove the vanity top from the box while maintaining its vertical
position. You can use the sink openings to hold vanity top, but be sure
to also the top from the bottom. Always maintain the top in a vertical
position while
carrying.
3. Carefully lift the vanity top onto the vanity, ensuring that the top does
not hit or bump anything. Have someone assist you if you cannot
easily handle weight of the top.
4. Slowly and carefully place the top on the vanity. Check that the top is
level. If not, insert shims and adjust as
necessary.
5. Raise the vanity top and place a dot of adhesive silicone sealant on
the corners of the vanity.
6. Position the vanity top back onto the vanity and press firmly into place.
Wipe away any excess sealant with a damp cloth.
7. If your vanity top has a separate side and/or back-splash, place a
bead of adhesive silicone sealant on the back and press firmly into
place. Fill the gaps between the wall and splash, and vanity top and
splash with silicone sealant. Wipe away any excess sealant with a
damp cloth. Let the silicone dry for 24 hours before using your vanity.
Vanity Top Installation Instructions
1
SINK INSTALLATION
UNDERMOUNT SINK INSTALLATION
1. Carefully turn the counter top over, resting it on a soft, stable surface to prevent damage.
2. Position the undermount sink over the sink cutout on the counter top. Make sure the sink is centered with the faucet
hole and is evenly spaced between the bolt holes.
3. Draw an outline of the sink on the counter top.
4. Remove the sink from the counter top. Apply a generous bead of silicone sealant around the perimeter of the sink
rim.
5. Carefully place the sink upside down on the counter top, positioning it within the outline.
6. At each of the bolt holes in the counter, attach sink clips by placing the long end of the bracket flat against the sink
lip. Screw the wing bolts through the brackets and bolt holes and tighten snugly.
7. Carefully turn the counter top and sink over. If needed, reposition the sink by slightly loosening the wing bolts and
adjusting.
8. Remove any excess sealant and let dry for 24 hours.
SEMI-RECESSED SINK INSTALLATION
1.
2.
3.
4.
Carefully turn the sink over to rest upside down on the counter top.
Apply a continuous bead of silicone sealant to the outer edge of the sink where it will contact the counter.
Turn the sink back over, placing it inside the 13" cutout and position until centered.
Remove any excess sealant and let dry for 24 hours.
Vanity Top Installation Instructions
2
VESSEL SINK INSTALLATION
1. Carefully place the sink upside down on the counter top. Apply a continuous bead of silicone sealant to the base of
the sink where it will rest on the counter.
2. Turn the sink right-side-up and position over the 2" drain hole.
3. If desired, apply a continuous bead of silicone sealant around the perimeter of the sink base for additional stability.
4. Remove any excess sealant and let dry for 24 hours.
Vanity Top Installation Instructions
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising