DOOR GRILLE INSTALLATION INSTRUCTIONS

DOOR GRILLE INSTALLATION INSTRUCTIONS
DOOR GRILLE
INSTALLATION INSTRUCTIONS
Before you begin, read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages and ensure that none of the required pieces are missing. If
you find damages, do not install. Contact Customer Service at 1.866.855.2284. If you need assistance or have questions
while installing your door grille, contact Customer Service.
We recommend consulting a professional if you are unfamiliar with installing hardware fixtures. Signature Hardware
accepts no liability for any damage to the door or door grille, or for personal injury during installation.
TOOLS AND MATERIALS:
Tape Measure
Drill
Pencil
Masking Tape
Level
INSTALLATION
1. Use a tape measure and level to position the door grille.
2. Mark the locations of the four sides of the grille with masking tape.
3. Use a pencil to mark the locations of the mounting holes onto the masking tape.
4. Drill pilot holes in the door in the locations marked in the previous step.
6. Hold the grille cover in place and insert screws one by one in each of the mounting holes. Start from the center and
move outward. Do not fully tighten screws.
7. Verify the grille alignment and finish tightening the mounting screws to secure.
8. To finish your installation, remove the strips of masking tape around the door grille.
Door Grille Installation Instructions
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement