Seaside Communications DCT 6208 User manual

Seaside Communications DCT 6208 User manual

Add to My manuals
48 Pages

advertisement

Seaside Communications DCT 6208 User manual | Manualzz
SEASIDE TV
DCT 6208 HD DVR
Wiring Instructions
Additional Information
Digital Cable Box
USER MANUAL
DVR/HDTV Capable
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Graphical Symbols and supplemental warning marking locations on bottom of terminal.
WARNING
TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1
Read instructions
All the safety and operating instructions should be read before the digital cable box is operated.
2
Retain instructions
The safety and operating instructions should be retained for future reference.
3
Heed warnings
All warnings on the digital cable box and in the operating instructions should be adhered to.
4
Follow instructions
All operating and use instructions should be followed.
5
Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or ae rosol
cleaners. Use a damp cloth for cleaning.
6
Attachments
Do not use attachments not recommended as they may cause hazard.
7
Water and moisture
Do not use this equipment near water; for example, near a bathtub, wash bowl, kitchen sink, or
laundry- tub, in a wet basement, or near a swimming pool, and the like.
8
Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall
causing serious injury and serious damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of
the appliance should follow the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
9
Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the equipment and to protect it from overheating. The openings should never be blocked by
placing the product on a bed, sofa, rug, or similar surface. Equipment should never be placed near
or over a radiator or heat register, or in a built- in installation such as a bookcase or rack unless
proper ventilation is provided.
10
Power sources
This product should be operated only from the type of power sources indicated on the mar king
label. If you are not sure of the type of power supplied to your home, consult your local power
company. For equipment intended to operate from battery power, or other sources, refer to the
operating instructions.
11
Ground or polarization
This equipment may be equipped with a polarized alternating - current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12
Alternate warnings
This equipment may be equipped with a 3 - wire grounding - type plug , a plug having a third
(grounding) pin. This pin will only fit into a grounding - type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding - type plug.
13
Power cord protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
IMPORTANT SAFETY INSTRUCTIONS
14
Outdoor Cable Grounding
Ensure the cable system is grounded as to provide some protection against voltage surges and
built-up static charges.
15
Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.
This will prevent damage to the video product due to lightning and power line surges.
16
Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical
shock.
17
Object and liquid entry
Never push objects of any kind into this equipment through openings, as they may touch
dangerous voltage points or short - out parts that could result in a fire or electrical shock. Never spill
liquid of any kind on the product.
18
Servicing
Do not attempt to service this equipment yourself, as opening or removing covers may expose you
to dangerous voltage or other hazards, return to Seaside Communications for replacement.
19
Safety check
Upon completion of any service to this digital cable box, ask the Seaside service technician to
perform safety checks to determine that the product is in proper operational condition.
20
Heat
This digital cable box should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
CANADIAN COMPLIANCE
This Class B digital apparatus meets all requirements of the Canadian Interference - Causing
Equipment Regulations. Cet appareil numérique de la classe B respects toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
www.ic.gc.ca/eic/site/ic1.nsf/eng/home
www.ic.gc.ca/eic/site/ic1.nsf/fra/accueil
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable. However, no
responsibility is assumed for inaccuracies. Furthermore, Seaside Communications reserves the right to make
changes herein to improve readability, function, or design.
Motorola Computer Software Copyrights
The Motorola product described in this manual may include copyrighted Motorola computer programs stored
in semiconductor memories or other media. Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the
exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any
copyrighted Motorola computer programs contained in the Motorola products described in this manual may
not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express
written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant
either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent
applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in
the sale of a product.
Motorola, Inc.
www.motorola.com
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office.
All other product or service names are the property of their respective owners. © Motorola, Inc. 2010
DCT 6208 User Guide
CONTENTS
Introduction ............................................................................................. 3
Basic Operation....................................................................................... 6
Turning Power On and Off............................................................... 6
Changing Channels .......................................................................... 6
Adjusting the Volume....................................................................... 6
Interactive Program Guide............................................................... 6
Audio/Video Connections ...................................................................... 7
RF Bypass................................................................................................ 8
Optimizing Your DCT* Output Settings .............................................. 10
User Options ................................................................................... 12
Connecting Your DCT* ......................................................................... 15
Connecting Your DCT* to a HDTV – Video Only ................................ 16
Connecting Your DCT* to a HDTV – Audio Only................................ 18
Connecting Your DCT* to an A/V Receiver – Audio Only ................. 20
Connecting your DCT* to a Stereo TV ................................................ 22
Connecting your DCT* to a Stereo TV and Stereo VCR .................... 24
Connecting your DCT* to an A/V Receiver, TV, and VCR ................. 26
Connecting your DCT* to a Stereo TV, VCR, and DVD...................... 28
Recording Your Connections .............................................................. 30
Graphics Overlaying the Video............................................................ 32
1
DCT 6208 User Guide
CONTENTS
Data Devices..........................................................................................33
Data Features..................................................................................34
Troubleshooting....................................................................................35
Specifications........................................................................................40
Physical Dimensions......................................................................40
2
DCT 6208 User Guide
INTRODUCTION
Welcome and congratulations on receiving a Motorola DCT* High
Definition Cable Receiver, one of the most advanced interactive digital
cable receivers available today. With the DCT*, Motorola has merged the
extraordinary features of digital cable - the seemingly endless
programming options, interactive program guides, Video on Demand
(VOD), and commercial free, CD quality music – with digital video
recording (DVR) and the incredible picture quality and sound of
High-Definition TV.
The DCT 6208 is the next generation of Motorola’s DCT5100 platform
enhanced with an internal processor. The DCT6208 also includes an
“Entertainment Package” that enables a direct digital connection to
consumer audio and video devices via 1394-DTV and DVI interfaces.
The DCT6208 is fully equipped with an integrated 80 GB hard drive for
hours of DVR functionality, including the capability of recording high
definition programs. The DCT6208 also features a 1394 Firewire digital
interface to enable external hard-drive expansion for increased storage
or connection to future networked video devices.
This User Guide introduces you to the basic features of the DCT*,
outlines important safeguards, and provides several options for
integrating this component into your current entertainment system.
Please take a few moments to read through this User Guide as the
configuration diagrams, on - screen menu description, and troubleshooting
section will help you make the most of your home entertainment
experience.
3
DCT 6208 User Guide
Message Indicator
Lights when a message is waiting
POWER switch
FRONT PANEL
Turns the DCT* on or off
MENU switch
Displays the menu area
INFO switch
Displays current channel and program information
CURSOR
INFO
MSGS.
MENU
ON
MU TE
POWER
USB
VIDEO IN
L AUDIO IN R
CURSOR
POWER
indicator
Moves cursor around program
guide and menu screens
Lights to indicate
DCT* is on
AUDIO IN (L/R)*
Connects to a CD player or stereo tuner
USB*
Connects to
support devices
VIDEO IN*
Connects to baseband video output of a
VCR, camcorder, or other video device
TO TV/VCR
Connects to TV or VCR
CABLE IN
Connects to cable signal
from your service provider
AUDIO IN (R/L)*
Connects to a CD player or stereo tuner
ETHERNET*
DVI*
Supports PC
networking
Connects DCT*
to a high-definition TV
ETHERNET
TO
TV/VCR
R
AUDIO IN
DVI-D OUT
IR
CABLE
IN
AUDIO OUT
USB
TV
Pass Card
IR
Enables DCT* to control a VCR
while recording a selected program.
(Not supported by all program guides).
USB*
Connects to support devices
AUDIO OUT (R/L)
Connects to audio input of a stereo receiver
4
L
DCT6200/DCT6208 User Guide
A/B Indicator
Lights, if optional switch is activated
SELECT switch
Selects menu options
GUIDE switch
Displays the program guide
A/B switch
Manually enables RF bypass function (optional)
CH ANNEL
A/B
P
A/B
GUIDE
SMART C ARD
REMOTE
SELEC T
REMOTE
indicator
SMART
CARD*
Lights to indicate
remote control
is in use
Supports electronic commerce using a
Smart Card.
Display
CHANNEL
Displays channel number
and time of day
Scrolls down or
up through the
channels
SPDIF
Provides Dolby® Digital 5.1 audio or PCM audio
VIDEO IN*
BACK PANEL
Connects to baseband video output from
a VCR, camcorder, or other video device
VIDEO OUT
Delivers video to an external
device, such as a TV or VCR
L
SPDIF
IN
VIDEO
OUT
IEEE 1394
S-VIDEO
Y
AC Switched Outlet
Connect AC power cord from
another device, such as a TV or VCR
Pb
Pr
OPTICAL
SPDIF
IEEE 1394
Connects to audio and video devices
Y Pb Pr
Delivers component video
OPTICAL SPDIF
Provides Dolby® Digital 5.1 audio or PCM audio
S-Video
Connect to S-Video input of TV or VCR
*Your DCT6200/DCT6208 may not support all of the inputs and outputs shown.
5
BASIC OPERATION
Turning Power On and Off
Press POWER on the front panel to turn the DCT* on or off. When using
the remote control, be sure it is in cable mode by pressing CABLE
before pressing POWER.
Changing Channels
You can change channels in two ways:
•
Press CHANNEL or on the front panel of the DCT*, or
press CHANNEL + or - on the remote control to step through the
channel selection.
•
Enter the number of the channel you want to tune using the
number keys on the remote control.
Adjusting the Volume
Press VOLUME + or – on the remote control to adjust the volume. When
you adjust the volume, the volume scale is displayed on the screen.
Press MUTE on the remote control to turn the sound off and on again.
For best audio quality, use the remote control to set the DCT* to
approximately ¾ of the maximum volume level and then adjust the
audio levels on external devices such as your TV or A/V Receiver.
Interactive Program Guide
The interactive program guide displays information about TV programs
and enables you to access features such as Parental Control or
Pay-Per-View. Interactive program guides can vary with each cable
service provider. Refer to the interactive program guide instruction
manual for detailed instructions.
6
DCT6200/DCT6208 User Guide
AUDIO/VIDEO CONNECTIONS
Before you move or change components on your entertainment system,
review the following:
•
For basic cable connections, use 75-ohm coaxial cables equipped
with F-type connectors. A 6-foot coaxial cable is provided to
connect the DCT* to your cable wall outlet. A 6-foot component
video cable and left/right audio cables are also provided to connect
the DCT* to your TV.
•
If your equipment supports it, S-video connections may be used in
place of the standard RCA video connections. In most cases,
S-video offers a higher level of standard definition video quality
than RCA video
•
If your equipment supports it, the optical (OPTICAL SPDIF) or coaxial
digital (SPDIF) audio outputs may be used in place of the stereo
audio outputs (AUDIO R and L). In most cases these outputs offer a
higher level of audio quality, including support for 5.1 Surround
Sound.
•
If you are connecting a coaxial cable from the TO TV/VCR connector
on the DCT* to the coaxial CABLE/ANTENNA IN connector on the TV,
you must tune your TV to channel 3 or 4 to view the DCT* output.
Connecting the DCT* in this manner will remove its high definition
video capability.
•
Disconnect power from the DCT* before connecting or changing
cable connections.
The DCT* offers Component and DVI video outputs. These outputs
provide a high level of video quality. If your High Definition television
(HDTV) or home theater receiver supports either of these connections,
use one or the other instead of the RCA type or S-Video connections.
For more information on connecting High Definition video, see
“Connecting your DCT* to an HDTV – Video Only” on page 16.
CAUTION!
Do not place anything on top of the DCT*, especially other home
entertainment components. Be sure to provide adequate ventilation to
prevent overheating.
7
RF BYPASS
oc=ETR=çÜãF
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
VIDEO
IN
OUT
RPT OUT
DVI-D OUT
IR
RF IN
AUDIO OUT
USB
IEEE 1394
S-VIDEO
RF IN
Y
Pb
Pr
TV
Pass Card
OPTICAL
SPDIF
RF
OUT
CONV
OUT
CONV
IN
CABLE
IN
TO
TV/VCR
CABLE
IN
From cable outlet
To TV
8
DCT6200/DCT6208 User Guide
The DCT* may be equipped with an optional RF Bypass switch.
When the optional RF bypass switch is activated, it routes the cable
signal directly to a cable-ready TV, bypassing the DCT*. This
configuration enables you to view clear (unscrambled) analog
programming on the direct cable signal should the DCT* be powered off.
The RF bypass is not available on all cable systems.
9
OPTIMIZING YOUR DCT* OUTPUT SETTINGS
The Motorola DCT* delivers high-quality video for high definition TVs
using the YPbPr (component) and DVI-D video connectors. This section
describes how to use the on-screen display to set your DCT* to
automatically optimize both standard and high definition video based on
your HDTV and personal preferences.
You can use your on-screen menu to configure your high definition
settings for TV type, DVI and/or YPbPr video output and closed
captioning.
To access your high definition settings, ensure that your DCT* is plugged
into a power outlet and is turned off. Press the MENU key on the front
panel. If your TV is on, the on-screen display menu appears listing the
settings you can configure.
DVI/YPbPr OUTPUT
Use your remote control or the cursor keys on the front panel to navigate
the on-screen display. Press the ▲ and ▼ keys to highlight the setting
you wish to change. Press the ► key to select an option for that setting.
To exit the setting and move to another setting, use the ▲ and ▼ keys.
To exit the menu and save your settings, press the POWER or MENU key.
The high definition settings are described in the table on the following
pages.
10
DCT6200/DCT6208 User Guide
The DVI/YPbPr OUTPUT setting displays as YPbPr OUTPUT if you are
not using the DVI video connection. The user settings will also be
displayed on the front panel LED whether your TV is off or on.
If the on-screen display menu does not appear on your HDTV screen,
your TV may not support the default video output setting. Use the DCT*
front panel LED to view and change your settings.
11
User Options
Setting
Description
TV Type
Selects the type of TV. The LED panel will display the output
type you have selected. Defaults to 16:9.
Options are 16:9 (for wide screen TVs); 4:3 LETTERBOX or
4:3 PAN/SCAN (for normal TVs).
4:3 LETTERBOX allows you to view widescreen programming
in a letterbox format through the S-video, composite video, or
RF video outputs when the DCT* is tuned to a widescreen
program. 4:3 PAN/SCAN allows you to view widescreen
programming in 4:3 full screen format through the S-video,
composite video, or RF video outputs when the DCT* is tuned
to a widescreen program.
Y Pb Pr
Output
Selects the video display for the DVI and YPbPr component
video outputs. The LED panel will display the format you have
selected. Defaults to 1080i.
Options are 1080i, 720p, 480p, or 480i.
Some TVs can only support certain display formats. Check
your TV User Guide for more information. If you are not using
an HDTV, selecting a format other than 480i will cause the
on-screen display to go blank. If this happens you can still
view your settings on the LED panel to change the format back
to 480i.
12
DCT6200/DCT6208 User Guide
Setting
Description
4:3 Override
Selects the DVI or YPbPr (Component video) output format of
the DCT* when it is tuned to 4:3 standard definition programs.
Defaults to 480i.
Options are OFF, 480i or 480p. If the DVI/YPbPr Output is set
to 480i, this setting becomes redundant and defaults to OFF.
This setting provides the ability to specify how 4:3 pictures are
to be displayed on your TV. Most TV programming is 4:3
aspect ratio (square).
Selecting OFF will display regular TV programs that are 4:3
aspect ratio in widescreen format. If you have a widescreen
TV, black bars will be placed on the left and right of the picture
to fit your screen. Selecting OFF when you have a 4:3 TV
Type may result in a small picture with black bars on all four
sides of the screen.
Selecting 480i will transmit TV programs that are not high
definition in their original 480i format. Some TVs cannot
display 480i format on their component video inputs (Y Pb Pr).
Check your TV User Guide for more information.
Selecting 480p will convert TV programs that are not high
definition to a higher quality 480p format. Some TVs cannot
display 480p format on their component video inputs
(Y Pb Pr). Check your TV User Guide for more information.
Closed
Caption
Turns closed captions off or on. The LED panel will display the
status of the closed captions. Defaults to DISABLED.
Options are ENABLED or DISABLED.
Pen Size
Selects the font size for closed captions. Defaults to AUTO.
Options are AUTO, STANDARD, LARGE, or SMALL.
Font Style
Selects the font style for closed captions. Defaults to AUTO.
Options are AUTO, MONO SERIF, PROPORTION SERIF,
MONO NO SERIF, PROPORTION NO SERIF, CASUAL,
CURSIVE, or SMALL.
Foreground
Color
Selects the foreground color for closed captions. Defaults
to AUTO.
Foreground
Opacity
Selects the opacity of the closed captions foreground. Defaults
to AUTO.
Options are AUTO, WHITE, BLACK, RED, GREEN, BLUE,
YELLOW, MAGENTA, or CYAN.
Options are AUTO, TRANSPARENT, TRANSLUCENT,
SOLID, or FLASHING.
13
Setting
Description
Background
Color
Selects the background color for closed captions. Defaults
to AUTO.
Background
Opacity
Selects the background opacity for closed captions. Defaults
to AUTO.
Service
Selection
Selects the service to be used for closed captions. Defaults to
AUTO.
Options are AUTO, WHITE, BLACK, RED, GREEN, BLUE,
YELLOW, MAGENTA, or CYAN.
Options are AUTO, TRANSPARENT, TRANSLUCENT,
SOLID, or FLASHING.
Options are AUTO, PRIMARY LANGUAGE,
SECONDARY LANGUAGE, 3, 4, 5, or 6.
Settings
Selects the default settings for closed captions (AUTO) or the
settings you have configured (USER). Defaults to AUTO.
Options are AUTO or USER.
Restore
Defaults
Resets the on-screen display options to their default settings.
14
DCT6200/DCT6208 User Guide
CONNECTING YOUR DCT*
This section describes how to connect the DCT* to your home
entertainment system.
Instructions and diagrams are included for the following connections to
the DCT*:
•
High Definition Television (HDTV)
•
A/V Receiver – Audio
•
Stereo TV
•
Stereo TV and Stereo VCR
•
A/V Receiver, TV, and VCR
•
Stereo TV, VCR, and DVD
In this User Guide, DCT* refers to both the DCT6200 and DCT6208 High
Definition Cable Receivers.
15
CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY
asf
ÅçååÉÅíáçå
`çãéçåÉåí=îáÇÉç
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
IEEE 1394
S-VIDEO
AUDIO OUT
TV
Pass Card
USB
Y
Pb
Pr
OPTICAL
SPDIF
`~ÄäÉ= áå
báíÜÉê=L=çê
eaqs
Component
Video Input
CABLE/
ANTENNA IN
VIDEO
IN
OUT
DVI-D OUT
IR
CABLE
IN
DVI-HDTV
L SPDIF
Y
Pb
Pr
16
DCT6200/DCT6208 User Guide
Connecting HDTV – Video Only
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the DCT*.
2
Connect the component video cables to the Y, Pb, and Pr
connectors on your HDTV and DCT*.
Or
Connect a DVI cable to the DVI-D OUT connector on the DCT* and
the DVI-HDTV connector on your TV.
These connections support only the high-definition video connection
between the DCT* and the HDTV. To connect the audio connections for
your HDTV, proceed to the following page. To connect your audio
connections for an A/V receiver, go to “Connecting Your DCT* to an A/V
Receiver – Audio Only”.
For information on configuring your DCT* settings, see “Optimizing Your
DCT* Output Settings”.
17
CONNECTING YOUR DCT* TO A HDTV – AUDIO ONLY
^ìÇáç
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
DVI-D OUT
IR
CABLE
IN
IEEE 1394
S-VIDEO
AUDIO OUT
Y
TV
Pass Card
USB
Pb
Pr
OPTICAL
SPDIF
eaqs
INPUT
S-VIDEO
VIDEO
CABLE/
ANTENNA IN
VIDEO
IN
OUT
AUDIO LEFT
AUDIO RIGHT
18
DCT6200/DCT6208 User Guide
Connecting HDTV – Audio Only
•
Connect the stereo audio cable to the AUDIO R and L connectors on
the DCT* and the AUDIO LEFT and AUDIO RIGHT connectors on the
HDTV.
For information on configuring your DCT* settings, see “Optimizing Your
DCT* Output Settings”.
19
CONNECTING YOUR DCT* TO AN A/V RECEIVER – AUDIO ONLY
^ìÇáç
ÅçååÉÅíáçå
aáÖáí~ä=~ìÇáç
ÅçååÉÅíáçå
léíáÅ~ä
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
VIDEO
IN
OUT
DVI-D OUT
IR
CABLE
IN
Y
Pb
Pr
TV
Pass Card
OPTICAL
SPDIF
báíÜÉê=L=çê
R
AUDIO
L
VIDEO
VIDEO
S-VIDEO
DIGITAL INPUT
COAX
DVD
CABLE/TV
OPTICAL
VIDEO 2
TV/MONITOR
OUTPUT
SPEAKER
CONNECTORS
IN
VIDEO S-VIDEO
VCR
IEEE 1394
S-VIDEO
AUDIO OUT
USB
OUT
^Ls=êÉÅÉáîÉê
20
DCT6200/DCT6208 User Guide
Connecting an A/V Receiver – Audio Only
There are three options available for audio connections to your A/V
receiver:
•
Optical (OPTICAL SPDIF)
•
Coaxial (SPDIF)
•
Stereo audio (AUDIO R and L)
If your equipment supports it, the optical (OPTICAL SPDIF) or coaxial
(SPDIF) audio outputs may be used in place of the stereo audio outputs
(AUDIO R and L). In most cases these outputs offer a higher level of audio
quality, including support for 5.1 surround sound.
•
Optical SPDIF: Connect the optical SPDIF cable to the OPTICAL
on the DCT* and the OPTICAL connector on the A/V
receiver.
SPDIF connector
•
SPDIF: Connect the digital audio cable to the SPDIF connector on
the DCT* and the DIGITAL INPUT COAX connector on the A/V
receiver.
•
Stereo audio: Connect the stereo audio cable to the AUDIO R and L
connectors on the DCT* and the AUDIO LEFT and AUDIO RIGHT
connectors on the A/V receiver.
For information on configuring your DCT* settings, see “Optimizing Your
DCT* Output Settings”.
21
CONNECTING YOUR DCT* TO A STEREO TV
oc=ETR=çÜãF
ÅçååÉÅíáçå
pJsáÇÉç
=ÅçååÉÅíáçå
sáÇÉç
ÅçååÉÅíáçå
^ìÇáç
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
VIDEO
IN
OUT
DVI-D OUT
IR
CABLE
IN
USB
IEEE 1394
S-VIDEO
AUDIO OUT
TV
Pass Card
Y
Pb
Pr
OPTICAL
SPDIF
`~ÄäÉ= áå
báíÜÉê=L=çê
píÉêÉç=qs
báíÜÉê=L=çê
INPUT
S-VIDEO
VIDEO
CABLE/
ANTENNA IN
AUDIO LEFT
AUDIO RIGHT
22
DCT6200/DCT6208 User Guide
Connecting a Stereo TV
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the DCT*.
2
Connect a second RF coaxial cable to the TO TV/VCR connector on
the DCT* and the CABLE/ANTENNA IN connector on the TV.
Or
Connect the stereo audio cable to the AUDIO R and L connectors on
the DCT* and the AUDIO LEFT and AUDIO RIGHT connectors on the
stereo TV.
Connect a video cable to the VIDEO OUT connector on the DCT* and
the INPUT VIDEO on the TV or an S-video cable to the S-VIDEO
connectors on the DCT* and the TV.
This video connection method does not support High Definition video.
For more information, see “Connecting your DCT* to an HDTV – Video
Only” on page 16.
23
CONNECTING YOUR DCT* TO A STEREO TV AND STEREO VCR
oc=ETR=çÜãF
ÅçååÉÅíáçå
sáÇÉç
ÅçååÉÅíáçå
^ìÇáç
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L SPDIF
IN
VIDEO
OUT
DVI-D OUT
IR
CABLE
IN
USB
IEEE 1394
S-VIDEO
AUDIO OUT
Y
Pb
Pr
TV
Pass Card
OPTICAL
SPDIF
`~ÄäÉ=áå
píÉêÉç=s`o
píÉêÉç=qs
INPUT
INPUT
CABLE/
ANTENNA IN
To TV
AUDIO
R
VIDEO
L
S-VIDEO
OUTPUT
AUDIO
R
VIDEO
VIDEO
CABLE/
ANTENNA IN
L
AUDIO LEFT
AUDIO RIGHT
24
DCT6200/DCT6208 User Guide
Connecting a Stereo TV and Stereo VCR
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the DCT*.
2
Connect a stereo audio cable to the AUDIO OUT R and L connectors
on the DCT* and the INPUT AUDIO R and L connectors on the stereo
VCR.
3
Connect a video cable to the VIDEO OUT connector on the DCT* and
the INPUT VIDEO connector on the stereo VCR.
4
Connect a stereo audio cable to the OUTPUT AUDIO R and L
connectors on the Stereo VCR and the INPUT AUDIO RIGHT and LEFT
connectors on the stereo TV.
5
Connect a video cable to the OUTPUT VIDEO connector on the stereo
VCR and the INPUT VIDEO connector on the stereo TV.
The video connection method does not support high definition video. For
more information, see “Connecting your DCT* to an HDTV – Video Only”
on page 16.
25
CONNECTING YOUR DCT* TO AN A/V RECEIVER, TV, AND VCR
oc=ETR=çÜãF
ÅçååÉÅíáçå
sáÇÉç
ÅçååÉÅíáçå
^ìÇáç
ÅçååÉÅíáçå
aáÖáí~ä=~ìÇáç
ÅçååÉÅíáçå
léíáÅ~ä
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
VIDEO
IN
OUT
L SPDIF
AUDIO IN
DVI-D OUT
IR
CABLE
IN
IEEE 1394
S-VIDEO
AUDIO OUT
Pb
Y
Pr
TV
Pass Card
USB
OPTICAL
SPDIF
`~ÄäÉ= áå
píÉêÉç=s`o
píÉêÉç=qs
INPUT
INPUT
CABLE/
ANTENNA IN
To TV
AUDIO
R
VIDEO
L
S-VIDEO
OUTPUT
AUDIO
R
VIDEO
VIDEO
AUDIO LEFT
CABLE/
ANTENNA IN
L
AUDIO RIGHT
^Ls=êÉÅÉáîÉê
R
AUDIO
L
VIDEO
VIDEO
S-VIDEO
DIGITAL INPUT
COAX
DVD
OPTICAL
CABLE/TV
VIDEO 2
TV/MONITOR
OUTPUT
IN
VCR
VIDEO S-VIDEO
OUT
26
SPEAKER
CONNECTORS
DCT6200/DCT6208 User Guide
Connecting an A/V Receiver, TV, and VCR
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the DCT*.
2
Connect a stereo audio cable to the AUDIO OUT R and L connectors
on the DCT* and the INPUT R and L connectors on the A/V receiver.
3
Connect a video cable to the VIDEO OUT connector on the DCT* and
the CABLE/TV VIDEO connector on the A/V receiver.
4
Connect a stereo audio cable to the VCR AUDIO OUT R and L
connectors on the A/V receiver and the INPUT AUDIO R and L
connectors on the stereo VCR.
5
Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L
connectors on the stereo VCR and the VCR AUDIO IN R and L
connectors on the A/V receiver.
6
Connect a video cable to the INPUT VIDEO connector on the stereo
VCR and the VIDEO VCR OUT connector on the A/V receiver.
7
Connect a video cable to the OUTPUT VIDEO connector on the stereo
VCR and the VIDEO VCR IN connector on the A/V receiver.
8
Connect a video cable to the INPUT VIDEO connector on the stereo
TV and the TV/MONITOR OUTPUT video connector on the A/V
receiver.
If your equipment supports it, the optical (OPTICAL SPDIF) or coaxial
(SPDIF) audio outputs may be used in place of the stereo audio outputs
(AUDIO R and L). In most cases these outputs offer a higher level of audio
quality, including support for 5.1 surround sound.
If your equipment supports it, S-video connections may be used in place
of the standard RCA video connections. In most cases, S-video offers a
higher level of standard definition video quality than RCA video.
The optional connections marked with an * allow you to use the DCT*
and TV without powering-on the VCR and A/V Receiver:
•
Connect an RF coaxial cable to the TO TV/VCR connector on the
DCT* and the CABLE/ANTENNA IN connector on the stereo VCR.
•
Connect an RF coaxial cable to the TO TV connector on the stereo
VCR and the CABLE/ANTENNA IN connector on the stereo TV.
The video connection method does not support high definition video. For
more information, see “Connecting your DCT* to an HDTV – Video Only”
on page 16.
27
CONNECTING YOUR DCT* TO A STEREO TV, VCR, AND DVD
oc=ETR=çÜãF
ÅçååÉÅíáçå
pJsáÇÉç
=ÅçååÉÅíáçå
sáÇÉç
ÅçååÉÅíáçå
^ìÇáç
ÅçååÉÅíáçå
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
VIDEO
IN
OUT
DVI-D OUT
IR
CABLE
IN
USB
IEEE 1394
S-VIDEO
AUDIO OUT
TV
Pass Card
Y
Pr
Pb
OPTICAL
SPDIF
`~ÄäÉ= áå
s`o
píÉêÉç=qs
INPUT
INPUT
CABLE/
ANTENNA IN
AUDIO
To TV
R
VIDEO
L
S-VIDEO
OUTPUT
AUDIO
R
VIDEO
L
VIDEO
AUDIO LEFT
CABLE/
ANTENNA IN
AUDIO RIGHT
asa
AUDIO OUT
COAX
OPTICAL
DIGITAL
R
VIDEO OUT
L
ANALOG
báíÜÉê=L=çê
28
VIDEO
S-VIDEO
DCT6200/DCT6208 User Guide
Connecting a Stereo TV, VCR, and DVD
This cable configuration may be used for a mono or stereo VCR,
because the VCR audio and video jacks are not used.
If your TV supports multiple sets of video and audio inputs (such as
VID1, VID2, etc.), see the diagram Connecting a Stereo TV and Stereo
VCR to connect your DCT*, VCR and TV. When you have completed
those connections, refer to the diagram illustrated here to connect your
DVD to your TV.
1
Connect an RF coaxial cable to the cable wall outlet and the CABLE
connector on the DCT*.
IN
2
Connect an RF coaxial cable to the TO TV/VCR connector on the
DCT* and the CABLE/ANTENNA IN connector on the VCR.
3
Connect an RF coaxial cable to the TO TV connector on the VCR
and the CABLE/ANTENNA IN connector on the stereo TV.
4
Connect a stereo audio cable to the INPUT AUDIO LEFT and RIGHT
connectors on the stereo TV and the AUDIO OUT ANALOG R and L
connectors on the DVD.
5
Connect a video cable to the INPUT VIDEO connector on the stereo
TV and the VIDEO OUT VIDEO connector on the DVD.
Or
Connect an S-video cable to the INPUT S-VIDEO connector on the
stereo TV and the VIDEO OUT S-VIDEO connector on the DVD.
The video connection method illustrated here does not support high
definition video. For more information, see “Connecting your DCT* to an
HDTV – Video Only” on page 16.
29
RECORDING YOUR CONNECTIONS
Use this diagram to record connections between your home
entertainment components. Later, you can use this diagram to reconnect
your system if you move the equipment or add new equipment.
Disconnect the power from the DCT* before connecting or changing
cable connections. Do not place another component or object on top of
the DCT*.
30
DCT6200/DCT6208 User Guide
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
IN
Y
Pb
VIDEO
OUT
DVI-D OUT
IR
CABLE
IN
USB
IEEE 1394
S-VIDEO
AUDIO OUT
Pr
TV
Pass Card
OPTICAL
SPDIF
s`o
INPUT
CABLE/
ANTENNA IN
AUDIO
qs
R
OUTPUT
VIDEO
AUDIO
L/MONO
L
DVI-HDTV
R
VIDEO
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
S-VIDEO IN
Y
To TV
R
L
CABLE/
ANTENNA IN
L
R
S-VIDEO OUT
Pb
Pr
píÉêÉç=êÉÅÉáîÉê
R
asa
L
CD IN
AUDIO OUT
SPEAKER
CONNECTORS
AUX IN
COAX
IN
OPTICAL
DIGITAL
TAPE 1
R
VIDEO OUT
L
ANALOG
OUT
^Ls=êÉÅÉáîÉê
R
AUDIO
L
VIDEO
VIDEO
S-VIDEO
DIGITAL INPUT
COAX
DVD
OPTICAL
CABLE/TV
VIDEO 2
TV/MONITOR
OUTPUT
IN
VCR
VIDEO S-VIDEO
OUT
31
SPEAKER
CONNECTORS
VIDEO
S-VIDEO
GRAPHICS OVERLAYING THE VIDEO
The DCT* can generate graphics that overlay the video programming or
fill the entire television screen. Common examples include on-screen
menus (such as the User Setting menu), closed captions, and interactive
program guides. The DCT* overlays these graphics whenever you open
a menu, enables closed captions, or scrolls through a program grid.
Overlaying graphics are not available on all DCT* video output and mode
combinations. The following table summarizes the availability of
overlaying graphics for each DCT* video output combination:
DVI or
YPbPr
Output
Mode
DCT6200
Primary Video
Output
(DVI or YPbPr)
DCT6200 Secondary Video Output
1080i
Graphics overlay
supported
Video only
Video only
Video only
720p
Graphics overlay
supported
Video only
Video only
Video only
480p
Graphics overlay
supported
Video only
Video only
Video only
480i
Graphics overlay
supported
Graphics
overlay
supported
Graphics
overlay
supported
Graphics
overlay
supported
S-Video Out
Composite
Out
RF Out
The 4:3 Override feature enables you to specify a different Output Mode
for high-definition (DVI or YPbPr) programming and standard-definition
(4:3) programming. If the 4:3 Override is set to 480i and the subscriber
tunes to a 4:3 standard channel, the DCT* displays graphics overlays on
all outputs even if the DVI or YPbPr Output Mode is 1080i, 720p, or
480p.
32
DCT6200/DCT6208 User Guide
DATA DEVICES
a`qSOMMLa`qSOMU
ETHERNET
TO
TV/VCR
R
AUDIO IN
L
SPDIF
VIDEO
IN
OUT
DVI-D OUT
IR
CABLE
IN
USB
IEEE 1394
S-VIDEO
AUDIO OUT
TV
Pass Card
Y
Pb
Pr
OPTICAL
SPDIF
USB
devices
Audio/Video
devices
Do not attempt to connect data devices without contacting your service
provider. Advanced data features require the proper application and
network infrastructure to operate.
33
Data Features
In addition to high quality audio and video, the DCT* has the capability to
deliver high-speed data services such as Internet access, e-mail, IP
Telephony, E-Commerce and home banking.
Your DCT* may be equipped with the interface connections illustrated,
but their functionality depends on the services offered by your service
provider.
34
DCT6200/DCT6208 User Guide
TROUBLESHOOTING
Before calling your service provider, review this troubleshooting guide.
This information is to help you quickly solve a problem. If your problem
still exists, contact your service provider.
Problem
Possible Solution
The DCT* will not
power on
Verify that the AC power cord is connected to the DCT*
and an AC outlet.
If the DCT* is connected to a switched outlet on another
unit, verify that that unit is powered on.
Press the POWER button on the DCT* front panel instead
of the remote control. The batteries in the remote control
may be depleted.
The DCT* may have received a software update and
may not power on while the new software is being
installed. Try again in a few minutes.
The remote control
does not work
Verify that the remote control is in “Cable” mode.
Verify that there are no obstructions between the remote
control and the DCT*. Aim the remote control directly at
the DCT* front panel, not the TV or VCR.
The angle between the remote control and the DCT*
may be too large. Stand in front of the DCT* and not too
far to either side.
Press and release operation keys one at a time, firmly
and deliberately.
Try changing channels using the buttons on the DCT*
front panel.
Check the batteries in the remote control. Install new
batteries if needed.
35
Problem
Possible Solution
There is no audio
when viewing cable
channels
Verify that the MUTE button on the DCT* or the remote
control has not been pressed. Press MUTE on the remote
control to restore sound.
If the DCT* audio output is connected to the TV, verify
that the MUTE button on the TV has not been pressed.
If the DCT* audio output is connected to a home theater
receiver, verify that the receiver is set to the appropriate
input source and the mute button on the receiver has not
been pressed.
Verify that you have the correct cables for the audio
ports.
Verify that the audio cables are firmly connected
between the DCT* and the audio playback device (TV,
receiver, etc.).
There is no audio
from the center
and/or surround
speakers of a home
theater receiver
connected to the
DCT*
Not all Dolby Digital programs feature full 5.1 surround
sound. In some cases, the programs may only contain
left and right stereo audio.
Verify that the SPDIF cable (coaxial or optical) is firmly
connected to the DCT* and the home theater receiver.
Verify that the home theater receiver is set to a surround
sound audio mode (Dolby Digital, Dolby Pro Logic II,
Dolby Pro Logic).
Verify that the receiver is properly configured to work
with all connected speakers.
36
DCT6200/DCT6208 User Guide
Problem
Possible Solution
There is no video
on the TV screen
Verify that the TV is powered on and set to the
appropriate input source for the DCT*.
Verify that the DCT* is powered on and tuned to an
authorized cable channel.
Verify that the coaxial cable feed is firmly connected to
the DCT* and the wall jack.
The DCT* DVI output may not yet be enabled. Use the
component video (Y Pb Pr) output instead.
If the DCT* video output is connected to a home theater
unit, verify that the home theater unit is powered on and
set to the appropriate input source.
Not all HDTVs can display every output format (1080i,
720p, 480p, or 480i) available on the DCT*. Enter the
User Settings menu and cycle through the available
output formats until a picture displays on the TV.
Verify that all video cables between the DCT* and the TV
are firmly connected.
There are no
graphics, closed
captions, or
program guides
appearing on the
TV screen
The DCT* cannot generate graphics on all video outputs
at all times. If the DCT* is set to 1080i, 720p, or 480p
output format, graphics are only available on the high
definition video outputs (DVI and component video). If
the DCT* is set to 480i, graphics are available on all
video outputs.
If the DCT* is connected to a standard definition (SD)
TV, verify that the DCT* is configured to use the 480i
output mode.
Verify that closed captions on the DCT* have been
enabled in the User Settings menu.
37
Problem
Possible Solution
There are black
bars to the right
and left of the
picture
Wide screen TVs display 4:3 programs in this format
unless set to Stretch. Turn on the 4:3 OVERRIDE feature
in the User Settings menu. This enables most wide
screen TVs to stretch the video to fill the screen (see the
TV manual for information about stretching 4:3 video).
If the DCT* is connected to a wide screen TV, verify that
the TV TYPE is set to 16:9 in the User Settings menu.
Many HD programs are broadcast in pillar-box format
with black bars to the left and right of the picture. These
programs are broadcast in 16:9 HD formats even though
the video is not 16:9.
There are black
bars above and
below the picture
All 4:3 HDTVs display HD programs in letterbox format
(black bars above and below the picture) because of the
shape of the display screen.
Turn on the 4:3 OVERRIDE feature in the User Settings
menu. This enables most standard screen TVs to display
a full screen picture when the DCT* is tuned to a 4:3
program.
Set the TV TYPE to 4:3 Pan-Scan. This enables the
DCT* to remove the black bars above and below the
picture when possible.
Some SD programs are broadcast in the letterbox format
with black bars above and below the picture. Some wide
screens TVs offer a zoom feature that may be able to
remove the black bars (see the TV manual for
information about zooming 4:3 video).
38
DCT6200/DCT6208 User Guide
Problem
Possible Solution
There are black
bars on all four
sides of the picture
This may occur on a 4:3 TV if the 4:3 OVERRIDE setting
is OFF. To cause 4:3 SD programming to fill the screen,
depending on the capabilities of the TV, set
4:3 OVERRIDE to 480i or 480p.
This may occur on a 16:9 TV if the active video for an SD
broadcast is in letterbox format. To confirm, wait for a
commercial or look for a graphic, such as a network logo.
If the commercial fills the screen from top to bottom, or
the graphic appears below the active video, the program
is being letterboxed by the broadcaster. You can
minimize this by activating the zoom feature on the TV.
A broadcaster may include black bars on either side of a
wide screen broadcast. This is called a “hybrid” aspect
ratio and results in a black border surrounding the video
on a 4:3 TV. Because this is part of the broadcast, the
DCT* cannot correct the video. You may be able to
minimize the border using the zoom feature on the TV.
39
SPECIFICATIONS
Physical Dimensions
Size
17.13 in. × 12.75 in. × 2.75 in.
Weight
9.5 pounds
40
www.seaside.ns.ca
539-6250
Office and Studio: 1318 Grand Lake Road
P.O. Box 4558, Reserve Mines, N.S. B1E 1L2

advertisement

Related manuals

Download PDF

advertisement