Cobra PR 900 5-Mile 15-Channel FRS/GMRS Two-Way Radio Two-Way Radio Operating instructions


Add to my manuals
19 Pages

advertisement

Cobra PR 900 5-Mile 15-Channel FRS/GMRS Two-Way Radio Two-Way Radio Operating instructions | Manualzz
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL60707
If You Think You Need Service
For technical assistance,please call our Automated Help Desk which can assist
you by answering the most frequently asked questions about Cobra products.
(773) 889-3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached through this same number
8:00 am - 6:00 pm,Monday through Friday, CST.
Technical assistance is also available on-line in the Frequently Asked Questions (FAQ)
section at www.cobra.com or by e-mail to [email protected]
Operating Instructions for your
2-Way Radio
PR 900 DX
If you think you need service call 1.773.889.3087
“If your product should require factory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair.”
You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following
in order to have the product serviced and returned.
1. For Warranty Repair include some form of pr oof-of-purchase, such as a mechanical reproduction
or carbon or a sales receipt. If you send the original receipt it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the unit.Include a typed or clearly print name
and address of where the unit is to be returned .
4. Pack unit securely to prevent damage in transit. If possible, use the original packing material.
5. Ship prepaid and insured by w ay of a traceable carrier such as United Parcel Service (UPS) or First
Class Mail to a void loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,6500
W. Cortland St., Chicago, IL 60707.
6. If the unit is in war ranty, upon receipt of your unit it will either be repaired or exchanged
depending on the model. Please allow approximately 3 to 4 weeks before contacting us for
status. If the unit is out of war ranty a letter will automatically be sent informing you of the
repair charge or replacement charge. If you have any questions, please call 1.773.889.3087
for assistance.
Cobra Electronics Corp.© 2001
Printed in China
Part No. 480-007-P
Nothing comes close to a Cobra™
Controls and Indicators
1. UHF Antenna
Thank you for purchasing the Cobra microTALK
PR 900 DX. Properly used, this Cobra product
will give you many years of reliable servic e.
2. Speaker/Microphone Jack
2
3. Charger Jack
4. On/Off Power/Volume Knob
Customer Support
3
5. LCD Display Panel
6. Speaker
Cobra Customer Service
Should you encounter any problems with the
product or not understand its many features,
please refer to this owner’s manual. If, after
referring to the manual, you still need help,
call Cobra Customer Service at 773.889.3087.
WITH COVER
OPEN
7. Battery Compartment
8. PTT Talk Button
9. Monitor/LCD Display
Light Button
Live operators are available
M-F 8:00 am - 6:00 pm CST at:
773.889.3087
Automated Technical Assistance
available 24 hours a day, seven
days a week.E-mail questions to:
[email protected]
CAUTION
10. Channel Up or Down Buttons
4
1
Important Safety Information For PR 900 DX
Your wireless handheld portable transceiver contains a radio
frequency transmitter. When the PTT Talk Button is pushed it sends
out RF signals.The device is authorized to operate at a duty fac tor
not to exceed 50% to comply with Federal Communications
Commissions (FCC) RF exposure safety level guidelines for handheld wireless devices.
11. Call Button
12. Lock Key
13. Mode Button
10
5
14. Belt Clip
14
8
9
13
11
12
6
7
A2
3
Cobra on the World Wide Web:
Frequently Asked Questions (FAQ)
can be found on-line at:
www.cobra.com
To maintain compliance with the FCC’s RF exposure guidelines hold
the transmitter at least 2 inches (5 centimeters) from your face and
speak in a normal voice, with the antenna pointed up and away. If
you wear the transceiver on your body while using a headset or
external microphone accessory, use only the supplied belt clip for
this product and ensure that the antenna is at least 2 inches
(5 centimeters) from your body when transmitting. If the distance
between the antenna and the b ody is LESS THAN 2.0 INCHES (5 CM)
DO NOT TRANSMIT WITH THIS DEVICE IN THE BODY WORN
CONFIGURATION. Unauthorized antennas,modifications, or attachments
could damage the transmitter and may violate FCC regulations.
This device complies
with part 15 of the FCC
rules. Operation is
subject to the condition
that this device does
not cause harmful
interference.
Normal Operating Position: Hold the transmitter approximately 2 to
3”from your face and speak in a normal voice, with the antenna
pointed up and away.
A3
General Mobile Radio Service
FCC Licensing Information
The PR 900 DX radio operates on General Mobile
Radio Service (GMRS) frequencies which require a
Federal Communication Commission (FCC) license.
For licensing information and application forms,
please call the FCC Hotline at:
1-800-418-FORM
(You need form #159 and form #605)
If you have any questions regarding the license
application you can contact the FCC direct at
1-888-CALL-FCC.
FCC Warnings
Replacement or substitution of transistors, regular
diodes or other parts of a unique nature, with
parts other than those recommended by Cobra,
may cause a violation of the technical regulations
of part 95 of the FCC Rules, or violation of Type
Acceptance requirements of Part 2 of the Rules.
Included with your microTALK PR 900 DX
1
1 Belt Clip
A1
How to Use Your Cobra
2-Way Radio
Contents
Features .........................................................................................................1
General Mobile Radio Service.............................................................A1
FCC Warnings
Included Accessories
Controls & Indicators...............................................................................A2
Our Thanks to You.....................................................................................A3
Customer Support.................................................................................A3
Operating your microTALK PR 900 DX
Battery Installation................................................................................ 2
Battery Low ..............................................................................................3
Turning On...............................................................................................4
LCD Display ..............................................................................................4
Select Main Channel (1-15)................................................................5
Select CTCSS Privacy Code (00-38)..................................................5
Talking To Another Party.....................................................................8
Calling Another Party...........................................................................10
Auto Squelch...........................................................................................12
Maximum Range Extender.................................................................12
External Microphone/Speaker Jack .................................................13
Advanced Features...................................................................................14
Lock Function..........................................................................................14
Busy Channel Lock Out........................................................................15
VOX..............................................................................................................16
Scan Function..........................................................................................17
Auto Channel Scan List........................................................................19
Priority Scan Channel...........................................................................20
Key Tone Settings..................................................................................21
microTALK PR 900 DX Range...............................................................22
Making Life Easier And Safer ..............................................................23
Frequency Ranges ....................................................................................25
Caring for Your microTALK PR 900 DX ...........................................27
microTALK PR 900 DX Specifications ..............................................28
Limited Two Year Warranty...................................................................29
Optional Accessories ...............................................................................30
Order Form ...................................................................................................31
If You Think You Need Service............................................Back Cover
Features of This Product
• UHF FM Frequencies
• Up to 5 Mile Range
• 15 GMRS Channels
(7 shared FRS Channels)
• 38 CTCSS Privacy Codes
• LCD Function Display
• Auto Squelch
• Lock Key
• Call Feature
(5 tone settings)
• Belt Clip
• VOX
• SuperFlex™ Antenna
• Programmable/Priority
Scan
• Rechargeable Batteries
Included
• Charger Adapter Included
1
Operation
Operation
Battery
Installation
Battery Low
Install Batteries
Battery Low
Note
When battery capacity is at
the 1/3 level it is recommended
that you recharge your
rechargeable batteries or
replace your alkaline batteries.
Note
Rechargeable NiMH
batteries are included with
your PR 900 DX. When not
using your NIMH batteries,
always use high quality
alkaline batteries.
Charge port is located on side
of unit.
When in normal use the (
) BATT LOW icon
may begin flashing. This is a warning tha t
batteries are getting low.
Incorrect positioning can
damage batteries and unit.
Antenna
Antenna
Pull lock tab down
and lift door up
(towards you) to
remove battery
cover.
2
Insert 4 “AAA”
batteries. Position
batteries according
to polarity markings.
The radio is equipped
with a SuperFlex™
antenna,which flexes
without breaking and
withstands the demands
of an active lifestyle.
3
Operation
Operation
Turning On Your microTALK PR 900 DX
Turning On
Your microTALK
TURN KNOB
PR 900 DX
CLOCKWISE
Select
Channels
Select Channels (1-15)
Main Channels 1-7 are shared with FRS radios .
Note
Units must be on same Main
Channel and CTCSS Privacy
Code to communicate.
Note
Whenever the unit is on you
can receive communications,
(except while pushing the
PTT Talk Button, or while
in Mode Function).
Turn the Volume Control clockwise to switch
power on. Set volume to desired level. Turn
the Volume Control counter-clockwise to turn
power off.
Illuminating
the Display
Illuminating the Display
PRESS
UP OR DOWN
Note
Push and hold Channel Up
or Down Buttons for fast
channel/code advance.
Turn on your microTALK PR 900 DX. An audible
“tone” will indicate the unit is on and the LCD
will self-test for 2 seconds and then go to
Operational Mode.
Select channel by pressing and releasing the
Channel Up or Down Buttons.
PRESS AND
RELEASE
Press and release
4
Monitor Button to illuminate
display for ten seconds.
Select CTCSS
Privacy Code
Note
Select CTCSS Privacy Code (00-38)
If you push and hold the
Mode Button,the LCD
display will cycle through
the different functions.
Selecting a CTCSS Privacy Code will enable you
to filter out unwanted conversations and allow
greater privacy. For example, when with a group
of friends, you select channel 7 and privac y
code 1, you will hear your friends and filter out
conversations on channel 7 with privacy c odes
2 through 38.
5
Operation
Operation
Select CTCSS
Privacy Code
Select CTCSS Privacy Code continued
PRESS AND
RELEASE
Note
Press and hold Channel Up or
Down Buttons for fast
channel/code advance.
PRESS AND
RELEASE
When desired CTCSS Privacy Code is displayed
press and release
PTT Talk Button or the
Mode Button to confirm your selection.
After selecting a Main Channel as instructed on
page 5, press and release
Mode Button.
Smaller numbers and the “CTCSS” icon will flash
next to Main Channel display on LCD.
PRESS
UP OR DOWN
Select CTCSS Privacy Code number by pressing
and releasing the Channel Up or Down Buttons.
6
Your PR 900-2 DX can also display the CTCSS
Privacy Code as a frequency number rather than
as a privacy code number.To select the frequency
number display option, make sure your PR 900-2
DX is off. While pressing the
Mode Button,
turn on the unit. Use the Channel Up/Down
Buttons to toggle between TcCode (privacy code
number) and TcFrE9 (privacy code frequency
number). Push the
PTT Talk Button to confirm
your selection.CTCSS Privacy Code numbers and
the corresponding frequency numbers are listed
on page 26.
7
Operation
Operation
Talking to
Another
Party
Standby Mode
Standby Mode
PRESS AND
HOLD
When finished talking, release PTT Talk Button
to receive incoming transmissions.
Your microTALK PR 900 DX is always in the
Standby Mode when the PTT Talk Button is
not pressed and you are not in M ode Function.
See Advanced Features section on page 14.
Note
While PTT Talk Button is
depressed you cannot
receive incoming calls.
Press and hold
PTT Talk Button.
The transmit LED will light up in red.
Hold mic about 2 inches from mouth.
Speak in a normal voice.
RELEASE FOR
RESPONSE
Release PTT Talk Button and listen
for response.
8
9
Operation
Calling
Another
Party
Operation
Calling Another Party
Note
Your microTALK PR 900 DX is
always in the Standby Mode
when thePTT Talk Button is
not depressed.
To alert another par ty you wish to
communicate:
TURN KNOB
CLOCKWISE
PRESS AND
RELEASE
Turn on your microTALK PR 900 DX. An audible
“tone” will indicate the unit is on. The LCD will
self-test for 2 seconds and then go to
Operational Mode.
PRESS
UP OR DOWN
Select desired Main Channel by pressing and
releasing
Channel Up or Down Buttons.
Both the calling and receiving units must
be on same Main Channel and CTCSS Privacy
Code for the Call Function to work.
10
Press and release
Call Button. The unit you
are calling will hear a 2
second ring tone, and the transmit LED will
light up in red
Your PR 900 DX allows you to send call alerts
in any 1 of 5 user tone settings.
To select your desired tone:
A. Make sure your PR 900 DX is off.
B. Press and hold the
Call Button while
at the same time turning on the unit.
C. Press the Channel Up or Down Buttons
to listen to each of the 5 tone settings.
D. When you reach a desired tone, press the
PTT Talk Button to program your selection.
Note
Your incoming “Call”audio ringing
level is dependent on your unit’s
volume setting.
Both the calling and receiving
units must be on same Main
Channel and CTCSS Privacy
Code for the Call Function
to work.
11
Operation
Auto Squelch
Maximum
Range
Extender
Note
To learn more about the range
of your microTALK PR 900 DX,
see page 22.
Range is dependent on
battery condition and
geographic terrain.
External Mic/Headphone Jack
Auto Squelch
External Mic/Headphone Jack
Your microTALK PR 900 DX is equipped with Auto
Squelch, which automatically shuts off weak
transmissions and unwanted noise due to terrain
conditions or if you have reached your range limit.
Your microTALK PR 900 DX can be fitted with a
variety of accessories (not included),freeing your
hands for other tasks.
To attach an external mic/headphone accessory:
Auto Squelch sensitivity can be changed to HI (least
sensitive) or LOW (most sensitive) by pressing the
Mode Button until the “5” (HI or LO) is displayed.
Use the Channel Up or Down Buttons to toggle
between HI or LO sensitivity. Press the
PTT Talk
Button to confirm your selection.
Maximum Range Extender
When the signal you want to hear is consistently
weak, you may place the radio in Maximum
Range Mode. Press and hold the Monitor Button
for 1 second.The “MON”icon will be illuminated on
the LCD. To return to normal operation, press and
hold the
Monitor Button again or change
channels.
External Mic/
Headphone
Jack
Note
To order optional microphone/
speaker accessories,
see page 31.
Insert plug into SPKR/MIC jack on the top of
the unit.
PUSH & HOLD
12
13
Advanced Features
Advanced
Features
Advanced Features
Your microTALK PR 900 DX has many advanced
features not found on other 2-Way Radios.
These include:
• Lock Key
• Busy Channel Lock Out
• VOX
• Main Channel/CTCSS Privacy Code Scan
• Priority Scan Selection Mode
• Tone Indicator Settings:
– Key Stroke Tone
Advanced Features
To “unlock” press and hold the
Lock Button
for one second.There is no lock icon visible. If
the Beep Function is ON you will hear an audible
confirmation. Buttons are “unlocked.”
Busy Channel
Lock Out
(BCLO)
Busy Channel Lock Out (BCLO)
BCLO Mode prevents transmission whenever
the unit detects another conversation on the
same channel.
Press
Mode Button until the (BCLO) icon
flashes on the LCD panel.
Lock Function
Lock Function
Note
The Lock Function locks the
Channel Up and
Down Buttons and
Mode Button to avoid
accidental operation.
Call Button,Monitor Button
and PTT Talk Button do not
lock and are fully operational
while the unit is locked.
To engage the Lock Function:
The unit cannot lock while
selecting a mode.
PRESS AND
HOLD
Press the Channel Up or Down Buttons to
toggle the (BCLO) function “on” or “off”.
Press the PTT Talk Button to confirm your
selection. The BCLO icon will be visible when
BCLO “on” is selected.
PRESS AND
RELEASE
Press and hold the
Lock Button for one
second. Lock icon will be visible. If the
Beep Function is ON you will hear an audible
confirmation. Most buttons are locked.
14
Lock Function
15
Advanced Features
VOX
Note
The VOX sensitivity level
setting is dependent on the
background noise and
will need to be adjusted
accordingly.
Advanced Features
VOX
Scan Function
VOX setting allows you to have hands-free
conversation.Your voice is detected and the
radio transmits without the need to press
the
PTT Talk Bu t to n.
To set radio for VOX operation:
Rotate the Volume Control counterclockwise
to turn power OFF.
Press and hold the PTT Talk Button.
Rotate the Volume Control clockwise to turn
power ON.
To set the VOX sensitivity level,
A. Press the
Mode Button until VOX icon
flashes and VOX appears in LCD Panel.
B. Press the Channel Up or Down Buttons
to select from 01-10 Voice Levels with 01
being the least sensitive and 10 being the
most sensitive.
C. Press the PTT Talk Button to confirm your
selection.
D. To turn off the VOX feature, rotate the Volume
Control counterclockwise to turn power OFF
and then turn power ON again.
Turn on microTALK PR 900 DX. An audible
“tone” will indicate the unit is on and then
the LCD will go through a 3 second self-test
and then go to Operational Mode.
PRESS AND
RELEASE
Press and release
Mode Button until
(
) icon and Main Channel flashes.
PRESS AND
RELEASE
16
17
Advanced Features
Scan Function
Advanced Features
Scan Function continued
Auto Channel
Scan List
Selection
Mode
Auto Channel Scan List Selection Mode
This feature allows you to add or remove Main
Channels from the scan list.The scan list is
pre-programmed to channels 1-15 with no
CTCSS Privacy Codes.
PRESS
Press Channel Up or Down Buttons and the
unit will begin scanning the Main Channels.
Unit will continue to scan all Main Channels
with CTCSS Privacy Codes that are on the scan
list (p.19) and stop if an incoming transmission
is detected.
Press the
Mode Button until the icon SKIP
or SCAN flashes on the LCD panel. The channel
is set to the solid icon.
Pressing either Channel Up or Down
Buttons will toggle between skip and scan.
Press the PTT Talk Button to confirm your
selection(s).
A. Press and hold PTT Talk Button and talk.
Your radio will return to Operational Mode
on that channel as long as a signal is detected
or...
PRESS AND
RELEASE
B. Press Channel Up or Down Buttons to
rescan the Main Channel.
or...
C. To exit scan either press the
Button or turn the unit off.
18
Mode
19
19
Advanced Features
Priority Scan
Channel
Selection
Mode
Advanced Features
Priority Scan Channel Selection Mode
Key Tone Settings
This function allows you to monitor one particular
channel while scanning other channels at the same
time.If you pre-set any Priority Scan Channel other
than the current channel in use,the pre-set channel
will be scanned every 0.5 second and any strong
signals on that channel will be displayed.
To access the Priority Scan menu:
Press the
Mode Button until the PRIO icon
flashes on the LCD panel.
Press the Channel Up or Down Buttons to
select the desired channel number you wish
to monitor. Only channels on the scan list will
be available as a Priority Scan Channel.
Press the
PTT Talk Button to lock in new
Priority Scan Channel.
This function allows the radio to sound a tone
whenever the following keys are pressed: Monitor
Button,Channel Up or Down Buttons, Mode Button
or Scan Button.
To turn the key tones on or off:
Press the
Mode Button until the musical note
Icon flashes on the LCD panel.
Press the Channel Up or Down Buttons to
toggle the key tone feature on or off.
Press the PTT Talk Button to confirm your
selection.
PRESS AND
RELEASE
PRESS AND
RELEASE
20
20
21
Key Tone
Settings
Note
The musical note icon will
display in Standby Mode
whenever the beep tones
are activated.
microTALK PR 900 DX Range
microTALK
PR 900 DX
Range
Note
To achieve maximum range the
Auto Squelch can be overridden.
Refer to Maximum Range
Extender section on page 12.
microTALK PR 900 DX Range
Your microTALK PR 900 DX has a range up
to 5 miles in GMRS. This effective range can
be shortened under some conditions.
Under flat, open
conditions you will
experience the radio’s
maximum range.
Range will be further
reduced by dense
foliage and hilly terrain.
22
Range can be reduced
by buildings and foliage
in the path of the signal.
Making Life Easier and Safer
microTALK PR 900 DX Can Make Your Life
Easier and Safer
As you become familiar with your microTALK
Professional Radio you will find many of your own
uses for the unit. Some suggestions include:
Talking with
fellow hikers.
Keeping track of the
kids in a shopping mall.
Communicating
between basement
and first, second or
third floor.
Talking to a neighbor
or a friend.
23
microTALK
PR 900 DX
2-Way Radios
Can Make
Your Life
Easier and
Safer
Making Life Easier and Safer
microTALK
PR 900 DX
2-Way Radios
Can Make
Your Life
Easier and
Safer
microTALK PR 900 DX Can Make Your Life
Easier and Safer continued
Checking on traveling
companions in another
car.
24
Agree on a meeting
spot after an event.
Frequency Range
Frequency
Ranges
The microTALK PR 900 DX unit represents one of
the most advanced FM 2-Way Radios available.
GMRS
Codes
Channel
Frequency
In MHz
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
462.5625
462.5875
462.6125
462.6375
462.6625
462.6875
462.7125
462.5750
462.6250
462.6750
462.5500
462.6000
462.6500
462.7000
462.7250
(Channels 1-7
shared with FRS)
25
Caring for Your
Frequency Range
26
CTCSS
Privacy
Code
Frequency
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
67.0 Hz
71.9 Hz
74.4 Hz
77.0 Hz
79.7 Hz
82.5 Hz
85.4 Hz
88.5 Hz
91.5 Hz
94.8 Hz
97.4 Hz
100.0 Hz
103.5 Hz
107.2 Hz
110.9 Hz
114.8 Hz
118.8 Hz
123.0 Hz
127.3 Hz
131.8 Hz
26
Caring for Your
microTALK
PR 900 DX
2-Way Radio
Caring for Your microTALK PR 900 DX
CTCSS
Privacy
Code
Frequency
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
136.5 Hz
141.3 Hz
146.2 Hz
151.4 Hz
156.7 Hz
162.2 Hz
167.9 Hz
173.8 Hz
179.9 Hz
186.2 Hz
192.8 Hz
203.5 Hz
210.7 Hz
218.1 Hz
225.7 Hz
233.6 Hz
241.8 Hz
250.3 Hz
The microTALK PR 900 DX will give you years
of service if cared for properly.
Here are some suggestions:
Note
Handle unit gently.
Keep away from dust.
Never place the
unit in water or in
a moist place.
Avoid exposure
to extreme
temperatures.
27
Modifying or tampering
with the radio’s internal
components can cause
malfunction and will
invalidate the warranty.
If your radio is not performing
as it should, please call Cobra
at 773.889.3087. Do not return
the unit to the retailer.
27
Specifications
Limited Two Year Warranty
I.GENERAL SPECIFICATIONS
B. RECEIVER
UNIT
1. SENSITIVITY
FOR 12 DB SINAD
FOR CALL SIG.DETECTION
2. MAX. AUDIO OUTPUT @5% THD
3. MAX.S/N RATIO @ 1mV RF INPUT
4. SQUELCH
a) SENS.
b) ATTACK TIME
c) CLOSING TIME
5. AUDIO FREQUENCY RESP.
@ 300 HZ
@ 2500 HZ
6. SIGNAL DISPLACEMENT BW
7. INTERMODULATION REJECTION
8. SPURIOUS RESPONSE REJECTION
uV
uV
MW
DB
0.25
0.2
300
45
uV
mS
mS
0.2
120
200
DB
DB
+/-KHZ
DB
DB
-2
-6
6
65
65
C.TRANSMITTER
1.
2.
3.
4.
5.
EFFECTIVE RADIATED POWER
CARRIER FREQ.STABILIT Y
MODULATION LIMITING
CARRIER ATTACK TIME
AUDIO FREQUENCY RESPONSE
@ 300 HZ
@ 2500 HZ
6. AUDIO DISTORTION
7. HUM and NOISE
8. TRANSIENT FREQ.BEHAVIOR
a) TX ON
b) TX OFF
D. POWER SUPPLY
1. BATTERY LIFE (1:1:18 RATIO)
2. BATTERY (4 x AAA)
COBRA ELECTRONICS CORPORATION warrants that its
COBRA Radios, and the component parts thereof, will be
free of defects in workmanship and materials for a period
of two (2) years from the date of first consumer purchase.
This warranty may be enforced by the first consumer
purchaser, provided that the product is utilized within
the U.S.A.
COBRA will,without charge, repair or replace, at its option,
defective radios, products or component parts upon delivery
to the COBRA factory Service Departmen t, accompanied
by proof of the date of first consumer purchase, such as a
duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship
the product for warranty service, but the return charges
will be at Cobra's expense, if the product is repaired or
replaced under warranty.
This warranty gives you specific legal rights, and you may
also have other rights which vary from sta te to state.
Cobra Electronics
Corporation
Exclusions: This limited warranty does not apply ; 1) to any
product damaged by accident; 2) in the event of misuse
or abuse of the product or as a result of unauthorized
alterations or repairs; 3) if the serial number has been altered,
defaced or removed;4) if the owner of the product resides
outside the U.S.A.
6500 West Cortland Street
Chicago, Illinois 60707
UNIT
W
ppm
KHZ
mS
2
5
4.0
80
DB
DB
%
DB
-10
+4
3
-40
mS
mS
30
5
All implied warranties, including warranties of
merchantability and fitness for a particular purpose
are limited in duration to the length of this warranty.
HR
18
COBRA shall not be liable for any incidental,consequential
or other damages; including, without limitation,damages
resulting from loss of use or cost of installation.
V
Some states do not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion
or limitation of incidental or consequential damages,
so the above limitations may not apply to you.
28
28
29
29
Optional Accessories
Accessory Order Form
Item #
Description
FA-BC
Replacement Belt Clip
MA-EBM
Ear Bud Microphone
MA-SM
Lapel Speaker/Microphone
MA-VOX
VOX Headset/Mic
Cost Ea.
Qty.
FA-BP
Rechargeable Battery Pack
Ear Bud Microphone
Miniature microphone and
earbud for private listening.
Lapel Speaker/ Microphone
Remote speaker/microphone
combination.
VOX Headset/ Mic
3515-0812-RC
Charger Adapter
VOX (Voice Operated Transmitter)
provides hands- free operation.
Prices subject to change without notice.
Subtotal
(Tax if applicable)
MA-EBM
MA-SM
MA-VOX
Tax Table
Illinois residents add 8.75%
Indiana residents add 5%
Michigan residents add 6 %
Ohio residents add 5%
Wisconsin residents add 5%
For credit card orders fill out order
form and fax to: 773.622.2269
or call 773.889.3087
(Press 1 from the main menu)
8:00 am - 6:00 pm, M-F, CST.
Rechargeable Battery Pack
High performance Nickel Metal
Hydride battery pack for
multiple charging.
Charger Adapter
Replacement Belt Clip
FA-BP
3515-0812-RC
FA-BC
You Can Find These Fine Accessories At Your Local Cobra Dealer
If you wish, you can order directly from Cobra.
Order by phone
Call 773.889.3087
(Press 1 from the main menu) 8 a.m.-6 p.m. M-F CST.
Order by mail or fax
Call 773.889.3087 for pricing. Fill out order form on ne xt page, and mail/fax directly to Cobra.
Order over the Web:www.cobra.com
30
Amount
Shipping & Handling
Amount of
Order
Shipping/
Handling
Shipping/handling
$25.00 and under
$4.75
Total
$25.01–$40.00
$6.95
$40.01–$80.00
$9.25
$80.01–$120.00
$10.25
$120.01–$160.00 $11.75
$160.01 and up
$14.50
For AK,HI and PR please add
an additional $15.00 for UPS
shipments.
Make check or money order (no stamps)
payable to:
Cobra Electronics
Accessories Dept.
6500 West Cortland St. Chicago, IL 60707
Please print clearly
Name
Address (No P.O. Box)
City
State
Zip
Telephone (
)
Credit Card No.
Exp. Date
Customer Signature
Circle One: Visa MasterCard Discover
Allow 2 to 3 weeks for delivery. Offer valid in Continental U.S.only.
31
Notes
The Cobra line of quality products
also includes:
• Citizens Band Radios
• microTALK® Radios
• Radar/Laser Detectors
• GPS
• SafetyAlert®
Traffic Warning Systems
• Accessories
• HighGear™ Accessories
Nothing comes close to a Cobra™

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement