QUAD DIFFERENTIAL COMPARATORS LM139, LM139A, LM2901,

QUAD DIFFERENTIAL COMPARATORS LM139, LM139A, LM2901,

www.ti.com

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

QUAD DIFFERENTIAL COMPARATORS

Check for Samples: LM139 , LM239 , LM339 , LM139A , LM239A , LM339A , LM2901 , LM2901AV , LM2901V

1

FEATURES

• Wide Supply Ranges

– Single Supply: 2 V to 36 V

(Tested to 30 V for Non-V Devices and 32 V for V-Suffix Devices)

– Dual Supplies: ±1 V to ±18 V

(Tested to ±15 V for Non-V Devices and

±16 V for V-Suffix Devices)

• Low Supply-Current Drain Independent of

Supply Voltage: 0.8 mA (Typ)

• Low Input Bias Current: 25 nA (Typ)

• Low Input Offset Current: 3 nA (Typ) (LM139)

• Low Input Offset Voltage: 2 mV (Typ)

• Common-Mode Input Voltage Range Includes

Ground

• Differential Input Voltage Range Equal to

Maximum-Rated Supply Voltage: ±36 V

• Low Output Saturation Voltage

• Output Compatible With TTL, MOS, and CMOS

LM139, LM139A . . . D, J, OR W PACKAGE

LM239 . . . D, N, OR PW PACKAGE

LM239A . . . D PACKAGE

LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE

LM2901 . . . D, N, NS, OR PW PACKAGE

(TOP VIEW)

LM139, LM139A . . . FK PACKAGE

(TOP VIEW)

1OUT

2OUT

V

CC

2IN-

2IN+

1IN-

1IN+

1

2

3

4

5

6

7

14

13

12

11

10

9

8

OUT3

OUT4

GND

4IN+

4IN-

3IN+

3IN-

V

CC

NC

2IN-

NC

2IN+

4

3 2 1 20 19

18

5

6

17

16

7

15

8

9 10 11 12 13

14

GND

NC

4IN+

NC

4IN-

NC - No inter nal connection

DESCRIPTION/ORDERING INFORMATION

These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and V

CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other opencollector outputs to achieve wired-AND relationships.

The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to

125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and LM339A are characterized for operation from 0°C to 70°C. The LM2901, LM2901AV, and LM2901V are characterized for operation from –40°C to 125°C.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright © 1979–2012, Texas Instruments Incorporated

On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

2

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

Table 1. ORDERING INFORMATION

(1)

T

A

V

IO max

AT 25°C

MAX V

CC

PACKAGE

(2)

0°C to 70°C

–25°C to 85°C

–40°C to 125°C

–55°C to 125°C

5 mV

2 mV

5 mV

2 mV

7 mV

7 mV

2 mV

5 mV

2 mV

30 V

30 V

30 V

30 V

30 V

32 V

32 V

30 V

30 V

PDIP – N

SOIC – D

SOP – NS

SSOP – DB

TSSOP – PW

PDIP – N

SOIC – D

SOP – NS

SSOP – DB

TSSOP – PW

PDIP – N

SOIC – D

TSSOP – PW

SOIC – D

PDIP – N

SOIC – D

SOP – NS

TSSOP – PW

SOIC – D

TSSOP – PW

SOIC – D

TSSOP – PW

CFP – W

CDIP – J

LCCC – FK

SOIC – D

CFP – W

CDIP – J

LCCC – FK

SOIC – D

Tube of 25

Tube of 50

Reel of 2500

Reel of 2000

Tube of 90

Reel of 2000

Reel of 2500

Reel of 2000

Reel of 2500

Reel of 2000

Tube of 25

Tube of 25

Tube of 55

Tube of 50

Reel of 2500

Tube of 25

Tube of 25

Tube of 55

Tube of 50

Reel of 2500

Reel of 2000

Reel of 2000

Tube of 90

Reel of 2000

Tube of 25

Tube of 50

Reel of 2500

Reel of 2000

Reel of 2000

Tube of 90

Reel of 2000

Tube of 25

Tube of 50

Reel of 2500

Tube of 90

Reel of 2000

Tube of 50

Reel of 2500

Tube of 25

Tube of 50

Reel of 2500

LM239AD

LM239ADR

LM2901N

LM2901D

LM2901DR

LM2901DRG3

LM2901NSR

LM2901PW

LM2901PWRG3

LM2901VQDR

LM2901VQPWR

LM2901AVQDR

LM2901AVQPWR

LM139W

LM139J

LM139FK

LM139D

LM139DR

LM139AW

LM139AJ

LM139AFK

LM139AD

LM139ADR

ORDERABLE

PART NUMBER

LM339N

LM339D

LM339DR

LM339DRG3

LM339NSR

LM339DBR

LM339PW

LM339PWRG3

LM339AN

LM339AD

LM339ADR

LM339ANSR

LM339ADBR

LM339APW

LM339APWR

LM239N

LM239D

LM239DR

LM239DRG3

LM239PW

LM239PWR

LM339

LM339

LM339

L339

L339A

LM239

L239

L2901

www.ti.com

TOP-SIDE

MARKING

LM339N

LM339AN

LM339A

LM339A

L339A

LM239N

LM239A

LM2901N

LM2901

LM2901

L2901V

L2901V

L2901AV

L2901AV

LM139W

LM139J

LM139FK

LM139

LM139AW

LM139AJ

LM139AFK

LM139AD

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com

.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .

Submit Documentation Feedback

Copyright © 1979–2012, Texas Instruments Incorporated

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

www.ti.com

IN+

IN−

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

SYMBOL (EACH COMPARATOR)

IN+

OUT

IN−

10

µ

A

SCHEMATIC (EACH COMPARATOR)

80-

µ

A

Current

Regulator

60

µ

A

10

µ

A 80

µ

A

V

CC

OUT

GND

All current values shown are nominal.

Copyright © 1979–2012, Texas Instruments Incorporated

Submit Documentation Feedback

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

3

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

www.ti.com

ABSOLUTE MAXIMUM RATINGS

(1)

over operating free-air temperature range (unless otherwise noted)

V

CC

V

ID

V

I

V

O

I

O

θ

θ

T

JA

JC

J

Supply voltage

Output voltage

Output current

(2)

Differential input voltage

(3)

Input voltage range (either input)

Duration of output short circuit to ground

(4)

Package thermal impedance, junction to free air

Package thermal impedance, junction to case

(5) (6)

(7) (8)

Operating virtual-junction temperature

Case temperature for 60 s

Lead temperature 1,6 mm (1/16 in) from case for 60 s

Storage temperature range

D package

DB package

N package

NS package

PW package

FK package

J package

W package

FK package

J package

MIN

–0.3

MAX UNIT

36 V

±36

36

V

V

36 V

20 mA

Unlimited

86

96

–65

80 °C/W

76

113

5.61

15.05

°C/W

14.65

150

260

300

150

°C

°C

°C

°C T stg

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values, except differential voltages, are with respect to network ground.

(3) Differential voltages are at IN+ with respect to IN–.

(4) Short circuits from outputs to V

CC can cause excessive heating and eventual destruction.

(5) Maximum power dissipation is a function of T

J

(max), θ

JA

, and T

A

. The maximum allowable power dissipation at any allowable ambient temperature is P

D

= (T

J

(max) – T

A

)/ θ

JA

. Operating at the absolute maximum T

(6) The package thermal impedance is calculated in accordance with JESD 51-7.

J of 150°C can affect reliability.

(7) Maximum power dissipation is a function of T

J temperature is P

D

= (T

J

(max) – T

C

)/ θ

JC

(max), θ

JC

, and T

C

. The maximum allowable power dissipation at any allowable case

. Operating at the absolute maximum T

J

(8) The package thermal impedance is calculated in accordance with MIL-STD-883.

of 150°C can affect reliability.

4

Submit Documentation Feedback

Copyright © 1979–2012, Texas Instruments Incorporated

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

www.ti.com

ELECTRICAL CHARACTERISTICS

at specified free-air temperature, V

CC

= 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS

(1)

T

A

(2)

LM139

MIN TYP MAX

2 5

LM139A

MIN TYP MAX

1 2

UNIT

I

I

V

IO

IO

IB

Input offset voltage

Input offset current

Input bias current

V

CC

V

IC

V

V

V

O

O

O

= 5 V to 30 V,

= V

ICR

= 1.4 V

= 1.4 V

= 1.4 V min,

25°C

Full range

25°C

Full range

25°C

Full range

9

3 25

100

–25 –100

–300

4

3 25

100

–25 –100

–300 mV nA nA

V

ICR

Common-mode inputvoltage range

(3)

25°C

Full range

V

CC

0 to

– 1.5

V

CC

0 to

– 2

V

CC

0 to

– 1.5

V

CC

0 to

– 2

V

I

A

V

VD

OH

OL

Large-signal differentialvoltage amplification

High-level output current

Low-level output voltage

V

CC+

V

O

= ±7.5 V,

= –5 V to 5 V

V

OH

= 5 V

V

ID

= 1 V

25°C

25°C

V

OH

= 30 V Full range

V

ID

= –1 V, I

OL

= 4 mA

25°C

Full range

V

ID

= –1 V, V

OL

= 1.5 V 25°C

200

0.1

1

150 400

700

16

50 200

0.1

1

150 400

700

16

V/mV nA

μ A mV

I

I

OL

CC

Low-level output current

Supply current

(four comparators)

V

O

= 2.5 V, No load 25°C

6

0.8

2

6

0.8

2 mA mA

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the commonmode voltage range is V

CC+

– 1.5 V; however, one input can exceed V

CC

, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.

SWITCHING CHARACTERISTICS

V

CC

= 5 V, T

A

= 25°C

PARAMETER

Response time

R

C

L

L connected to 5 V through 5.1 k

= 15 pF

(1) (2)

TEST CONDITIONS

Ω ,

100-mV input step with 5-mV overdrive

TTL-level input step

LM139

LM139A

TYP

1.3

0.3

(1) C

L includes probe and jig capacitance.

(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

UNIT

μ s

Copyright © 1979–2012, Texas Instruments Incorporated

Submit Documentation Feedback

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

5

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

www.ti.com

ELECTRICAL CHARACTERISTICS

at specified free-air temperature, V

CC

= 5 V (unless otherwise noted)

I

I

V

IO

IO

IB

V

ICR

PARAMETER

Input offset voltage

Input offset current

Input bias current

Common-mode inputvoltage range

(3)

V

CC

V

IC

V

V

V

O

O

O

TEST CONDITIONS

= 5 V to 30 V,

= V

ICR

= 1.4 V

= 1.4 V

= 1.4 V min,

(1)

T

A

(2)

25°C

Full range

25°C

Full range

25°C

Full range

25°C

Full range

LM239

LM339

MIN TYP MAX

2 5

9

5 50

150

–25 –250

–400

V

CC

0 to

– 1.5

V

CC

0 to

– 2

LM239A

LM339A

MIN TYP MAX

1 3

4

5 50

150

–25 –250

–400

V

CC

0 to

– 1.5

V

CC

0 to

– 2

UNIT

mV nA nA

V

I

I

I

A

VD

OH

V

OL

OL

CC

Large-signal differentialvoltage amplification

V

CC

V

O

= 15 V,

= 1.4 V to 11.4 V,

R

L

≥ 15 k Ω to V

CC

V

OH

= 5 V

High-level output current V

ID

= 1 V

25°C

25°C

V

OH

= 30 V Full range

Low-level output voltage V

ID

= –1 V, I

OL

= 4 mA

25°C

Full range

V

ID

= –1 V, V

OL

= 1.5 V 25°C Low-level output current

Supply current

(four comparators)

V

O

= 2.5 V, No load 25°C

50

6

200

0.1

0.8

50

1

150 400

700

16

2

50

6

200

0.1

0.8

V/mV

50 nA

1 μ A

150 400

700

16

2 mV mA mA

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the commonmode voltage range is V

CC+

– 1.5 V; however, one input can exceed V

CC

, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.

SWITCHING CHARACTERISTICS

V

CC

= 5 V, T

A

= 25°C

PARAMETER

Response time

R

C

L

L connected to 5 V through 5.1 k

= 15 pF

(1) (2)

TEST CONDITIONS

Ω ,

100-mV input step with 5-mV overdrive

TTL-level input step

LM239

LM239A

LM339

LM339A

TYP

1.3

0.3

(1) C

L includes probe and jig capacitance.

(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

UNIT

μ s

6

Submit Documentation Feedback

Copyright © 1979–2012, Texas Instruments Incorporated

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

www.ti.com

ELECTRICAL CHARACTERISTICS

at specified free-air temperature, V

CC

= 5 V (unless otherwise noted)

I

I

V

IO

IO

IB

V

ICR

PARAMETER

Input offset voltage

Input offset current

Input bias current

Common-mode inputvoltage range

(4)

V

IC

= V

ICR

TEST CONDITIONS

min,

V

O

V

CC

= 1.4 V,

= 5 V to MAX

(3)

V

V

O

O

= 1.4 V

= 1.4 V

(1)

Non-A devices

A-suffix devices

T

A

(2)

25°C

Full range

25°C

Full range

25°C

Full range

25°C

Full range

25°C

Full range

LM2901

MIN TYP MAX

2 7

15

1

5

200

–25 –250

–500

2

4

50

V

CC

0 to

– 1.5

V

CC

0 to

– 2

UNIT

mV nA nA

V

I

I

I

A

V

VD

OH

OL

OL

CC

Large-signal differentialvoltage amplification

High-level output current

Low-level output voltage

Low-level output current

Supply current

(four comparators)

V

CC

R

L

= 15 V, V

O

= 1.4 V to 11.4 V,

≥ 15 k Ω to V

CC

V

ID

= 1 V

V

OH

= 5 V

V

OH

= V

CC

MAX

(3)

Non-V devices

V

ID

I

OL

= –1 V,

= 4 mA

V-suffix devices

All devices

V

ID

= –1 V,

V

O

= 2.5 V,

No load

V

OL

= 1.5 V

V

CC

= 5 V

V

CC

= MAX

(3)

25°C

25°C

Full range

25°C

Full range

25°C

25°C

25

6

100

0.1

150

150

16

0.8

1

50

1

500

400

700

2

2.5

V/mV nA

μ A mV mA mA

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(3) V

CC

MAX = 30 V for non-V devices, and 32 V for V-suffix devices

(4) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the commonmode voltage range is V

CC+

– 1.5 V; however, one input can exceed V

CC

, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to V

CC

MAX without damage.

SWITCHING CHARACTERISTICS

V

CC

= 5 V, T

A

= 25°C

PARAMETER TEST CONDITIONS UNIT

Response time

R

L

C

L connected to 5 V through 5.1 k Ω ,

= 15 pF

(1) (2)

100-mV input step with 5-mV overdrive

TTL-level input step

LM2901

TYP

1.3

0.3

μ s

(1) C

L includes probe and jig capacitance.

(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

Copyright © 1979–2012, Texas Instruments Incorporated

Submit Documentation Feedback

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

7

1.2

1

0.8

0.6

1.8

1.6

1.4

0.4

0.2

0

0

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

SUPPLY CURRENT vs

SUPPLY VOLTAGE

TYPICAL CHARACTERISTICS

INPUT BIAS CURRENT vs

SUPPLY VOLTAGE

5 10 15 20 25

V

CC

– Supply Voltage – V

30 35

80

70

60

50

40

30

20

10

0

0 5 10 15 20 25

V

CC

– Supply Voltage – V

30 www.ti.com

35

OUTPUT SATURATION VOLTAGE

10

1

0.1

0.01

0.001

0.01

0.1

1 10

I

O

– Output Sink Current – mA

100

8

Submit Documentation Feedback

Copyright © 1979–2012, Texas Instruments Incorporated

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

www.ti.com

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

TYPICAL CHARACTERISTICS (continued)

RESPONSE TIME FOR VARIOUS OVERDRIVES

NEGATIVE TRANSITION

RESPONSE TIME FOR VARIOUS OVERDRIVES

POSITIVE TRANSITION

6

6

5

5

Overdrive = 5 mV

4

3

2

Overdrive = 20 mV

Overdrive = 100 mV

4

3

2

Overdrive = 5 mV

Overdrive = 20 mV

Overdrive = 100 mV

1

1

0

-1

-0.3

0 0.25 0.5 0.75

1 1.25 1.5 1.75

2 2.25

t – Time – µs

0

-1

-0.3

0 0.25 0.5 0.75

1 1.25 1.5 1.75

2 2.25

t – Time – µs

Copyright © 1979–2012, Texas Instruments Incorporated

Submit Documentation Feedback

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

9

LM139, LM239, LM339

LM139A, LM239A, LM339A

LM2901, LM2901AV, LM2901V

SLCS006S – OCTOBER 1979 – REVISED AUGUST 2012

www.ti.com

REVISION HISTORY

Changes from Revision R (July 2010) to Revision S Page

• Updated ORDERING INFORMATION table. ........................................................................................................................

2

10

Submit Documentation Feedback

Copyright © 1979–2012, Texas Instruments Incorporated

Product Folder Links:

LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

PACKAGE OPTION ADDENDUM

www.ti.com

16-Feb-2014

PACKAGING INFORMATION

Orderable Device

5962-7700801VCA

5962-87739012A

5962-8773901CA

5962-8773901DA

5962-9673802V9B

5962-9673802VCA

77008012A

7700801CA

7700801DA

JM38510/11201BCA

LM139AD

LM139ADG4

LM139ADR

LM139ADRG4

LM139AFKB

LM139AJ

Status

(1)

ACTIVE

Package Type Package

Drawing

Pins Package

Qty

CDIP J 14 1

Eco Plan

(2)

TBD

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

CDIP

CFP

XCEPT

CDIP

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

LCCC

SOIC

SOIC

SOIC

SOIC

LCCC

CDIP

CFP

CDIP

LCCC

CDIP

FK

J

W

KGD

J

20

14

14

0

14

1

1

100

1

TBD

TBD

TBD

TBD

D

D

D

D

W

J

FK

J

FK

14

14

20

14

1

1

1

1

TBD

TBD

TBD

TBD

14

14

14

14

20

50

50

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

1 TBD

J 14

1

1

TBD

TBD

POST-PLATE

A42

A42

A42

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

POST-PLATE

Lead/Ball Finish

(6)

A42

POST-PLATE

A42

A42

Call TI

A42

A42

MSL Peak Temp

(3)

N / A for Pkg Type

Op Temp (°C)

-55 to 125

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

-55 to 125

-55 to 125

-55 to 125

-55 to 125

-55 to 125

Device Marking

(4/5)

5962-7700801VC

A

LM139JQMLV

5962-

87739012A

LM139AFKB

5962-8773901CA

LM139AJB

5962-8773901DA

LM139AWB

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

Level-1-260C-UNLIM -55 to 125

Level-1-260C-UNLIM -55 to 125

Level-1-260C-UNLIM -55 to 125

Level-1-260C-UNLIM -55 to 125

N / A for Pkg Type

N / A for Pkg Type

-55 to 125

-55 to 125

-55 to 125

-55 to 125

-55 to 125

-55 to 125

5962-9673802VC

A

LM139AJQMLV

77008012A

LM139FKB

7700801CA

LM139JB

7700801DA

LM139WB

JM38510

/11201BCA

LM139A

LM139A

LM139A

LM139A

5962-

87739012A

LM139AFKB

LM139AJ

Addendum-Page 1

Samples

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device

LM139AJB

LM139AN

LM139AW

LM139AWB

LM139D

LM139DG4

LM139DR

LM139DRG4

LM139FK

LM139FKB

LM139J

LM139JB

LM139N

LM139W

LM139WB

LM239AD

LM239ADE4

LM239ADG4

LM239ADR

16-Feb-2014

Status

(1)

ACTIVE

Package Type Package

Drawing

Pins Package

Qty

CDIP J 14 1

Eco Plan

(2)

TBD

OBSOLETE

ACTIVE

ACTIVE

PDIP

CFP

CFP

N

W

W

14

14

14

1

1

TBD

TBD

TBD

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

OBSOLETE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

SOIC

SOIC

SOIC

SOIC

LCCC

LCCC

CDIP

CDIP

PDIP

CFP

CFP

SOIC

SOIC

SOIC

SOIC

D

D

D

D

FK

FK

J

J

N

W

W

D

D

D

D

14

14

14

14

20

20

14

14

14

14

14

14

14

14

14

50

50

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

1

1

1

1

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

TBD

TBD

TBD

TBD

1

1

TBD

TBD

TBD

50

50

50

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

Lead/Ball Finish

(6)

A42

Call TI

A42

A42

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

POST-PLATE

POST-PLATE

A42

A42

Call TI

A42

A42

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

MSL Peak Temp

(3)

N / A for Pkg Type

Op Temp (°C)

-55 to 125

Call TI

N / A for Pkg Type

N / A for Pkg Type

-55 to 125

-55 to 125

-55 to 125

Level-1-260C-UNLIM -55 to 125

Level-1-260C-UNLIM -55 to 125

Level-1-260C-UNLIM -55 to 125

Level-1-260C-UNLIM -55 to 125

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

N / A for Pkg Type

-55 to 125

-55 to 125

-55 to 125

-55 to 125

Call TI

N / A for Pkg Type

N / A for Pkg Type

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

-55 to 125

-55 to 125

-55 to 125

-25 to 85

-25 to 85

-25 to 85

Level-1-260C-UNLIM -25 to 85

Device Marking

(4/5)

5962-8773901CA

LM139AJB

LM139AW

5962-8773901DA

LM139AWB

LM139

LM139

LM139

LM139

LM139FK

77008012A

LM139FKB

LM139J

7700801CA

LM139JB

LM139W

7700801DA

LM139WB

LM239A

LM239A

LM239A

LM239A

Samples

Addendum-Page 2

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device

LM239ADRE4

LM239ADRG4

LM239AN

LM239D

LM239DE4

LM239DG4

LM239DR

LM239DRE4

LM239DRG3

LM239DRG4

LM239N

LM239NE4

LM239PW

LM239PWE4

LM239PWG4

LM239PWR

LM239PWRE4

LM239PWRG4

16-Feb-2014

Status

(1)

ACTIVE

ACTIVE

OBSOLETE

ACTIVE

Package Type Package

Drawing

SOIC

SOIC

PDIP

SOIC

D

D

N

D

Pins Package

14

14

14

14

Qty

Eco Plan

(2)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

TBD

50 Green (RoHS

& no Sb/Br)

ACTIVE SOIC D 14

ACTIVE

ACTIVE

ACTIVE

SOIC

SOIC

SOIC

D

D

D

14

14

14

50

50

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

ACTIVE SOIC D 14

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

SOIC

PDIP

PDIP

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

D

N

N

PW

PW

PW

PW

PW

PW

14

14

14

14

14

14

14

14

14

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

25 Pb-Free

(RoHS)

25 Pb-Free

(RoHS)

90

90

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

90 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

Lead/Ball Finish

(6)

CU NIPDAU

CU NIPDAU

Call TI

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU | CU SN Level-1-260C-UNLIM

CU NIPDAU

CU SN

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

MSL Peak Temp

(3)

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Call TI

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

N / A for Pkg Type

N / A for Pkg Type

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Op Temp (°C)

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

-25 to 85

Device Marking

(4/5)

LM239A

LM239A

L239

L239

L239

L239

LM239

LM239

LM239N

LM239N

L239

L239

LM239

LM239

LM239

LM239

LM239

Samples

Addendum-Page 3

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device

LM2901AVQDR

LM2901AVQDRG4

LM2901AVQPWR

LM2901AVQPWRG4

LM2901D

LM2901DE4

LM2901DG4

LM2901DR

LM2901DRE4

LM2901DRG3

LM2901DRG4

LM2901N

LM2901NE4

LM2901NSR

LM2901NSRE4

LM2901NSRG4

LM2901PW

LM2901PWE4

16-Feb-2014

Status

(1)

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

Package Type Package

Drawing

SOIC

SOIC

D

D

Pins Package

14

14

Qty

Eco Plan

(2)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

TSSOP

TSSOP

PW

PW

14

14

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

SOIC D 14

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

PDIP

D

D

D

D

D

D

N

14

14

14

14

14

14

14

50

50

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

50 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

25 Pb-Free

(RoHS)

PDIP

SO

SO

SO

TSSOP

TSSOP

N

NS

NS

NS

PW

PW

14

14

14

14

14

14

25 Pb-Free

(RoHS)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

90

90

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Lead/Ball Finish

(6)

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

MSL Peak Temp

(3)

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

CU NIPDAU | CU SN Level-1-260C-UNLIM

CU NIPDAU

CU SN

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

N / A for Pkg Type

N / A for Pkg Type

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Op Temp (°C)

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

LM2901

LM2901

LM2901

LM2901N

LM2901N

LM2901

LM2901

LM2901

L2901

L2901

Device Marking

(4/5)

L2901AV

L2901AV

L2901AV

L2901AV

LM2901

LM2901

LM2901

LM2901

Addendum-Page 4

Samples

PACKAGE OPTION ADDENDUM

www.ti.com

16-Feb-2014

Orderable Device

LM2901PWG4

LM2901PWLE

LM2901PWR

LM2901PWRE4

LM2901PWRG3

LM2901PWRG4

LM2901QD

LM2901QN

LM2901VQDR

LM2901VQDRG4

LM2901VQPWR

LM2901VQPWRG4

LM339AD

LM339ADBR

LM339ADBRG4

LM339ADE4

LM339ADG4

LM339ADR

LM339ADRE4

Status

(1)

ACTIVE

OBSOLETE

ACTIVE

ACTIVE

Package Type Package

Drawing

Pins Package

Qty

TSSOP

TSSOP

TSSOP

TSSOP

PW

PW

PW

PW

14

14

14

14

90

Eco Plan

(2)

Green (RoHS

& no Sb/Br)

TBD

2000 Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

ACTIVE TSSOP PW 14

ACTIVE

OBSOLETE

OBSOLETE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

TSSOP

SOIC

PDIP

SOIC

SOIC

TSSOP

TSSOP

PW

D

N

D

D

PW

PW

14

14

14

14

14

14

14

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

TBD

TBD

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

SOIC

SSOP

SSOP

SOIC

SOIC

SOIC

SOIC

D

DB

DB

D

D

D

D

14

14

14

14

14

14

14

50 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

50 Green (RoHS

& no Sb/Br)

50 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

Lead/Ball Finish

(6)

CU NIPDAU

CU NIPDAU

CU SN

CU NIPDAU

Call TI

Call TI

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

MSL Peak Temp

(3)

Level-1-260C-UNLIM

Call TI Call TI

CU NIPDAU | CU SN Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Call TI

Call TI

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

CU NIPDAU | CU SN Level-1-260C-UNLIM

Level-1-260C-UNLIM

Op Temp (°C)

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

-40 to 125

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

L2901

Device Marking

(4/5)

L2901

L2901

L2901

L2901

L2901V

L2901V

L2901V

L2901V

LM339A

L339A

L339A

LM339A

LM339A

LM339A

LM339A

Addendum-Page 5

Samples

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device

LM339ADRG4

LM339AN

LM339ANE4

LM339ANSR

LM339ANSRG4

LM339APW

LM339APWE4

LM339APWG4

LM339APWR

LM339APWRE4

LM339APWRG4

LM339D

LM339DBLE

LM339DBR

LM339DBRE4

LM339DBRG4

LM339DE4

LM339DG4

16-Feb-2014

Status

(1)

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

OBSOLETE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

Package Type Package

Drawing

SOIC

PDIP

D

N

Pins Package

14

14

Qty

Eco Plan

(2)

2500 Green (RoHS

& no Sb/Br)

25 Pb-Free

(RoHS)

PDIP

SO

N

NS

14

14

25 Pb-Free

(RoHS)

2000 Green (RoHS

& no Sb/Br)

SO NS 14

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

SOIC

PW

PW

PW

PW

PW

PW

D

14

14

14

14

14

14

14

2000 Green (RoHS

& no Sb/Br)

90 Green (RoHS

& no Sb/Br)

90

90

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

50 Green (RoHS

& no Sb/Br)

SSOP

SSOP

SSOP

SSOP

SOIC

SOIC

DB

DB

DB

DB

D

D

14

14

14

14

14

14

TBD

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

50

50

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

Call TI

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

Lead/Ball Finish

(6)

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

MSL Peak Temp

(3)

Level-1-260C-UNLIM

Op Temp (°C)

0 to 70

N / A for Pkg Type

N / A for Pkg Type

Level-1-260C-UNLIM

0 to 70

0 to 70

0 to 70

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

0 to 70

0 to 70

0 to 70

0 to 70

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Call TI

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

LM339

LM339

LM339

LM339

LM339

Device Marking

(4/5)

LM339A

LM339AN

LM339AN

LM339A

LM339A

L339A

L339A

L339A

L339A

L339A

L339A

LM339

Samples

Addendum-Page 6

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device

LM339DR

LM339DRE4

LM339DRG3

LM339DRG4

LM339N

LM339NE3

LM339NE4

LM339NSLE

LM339NSR

LM339NSRG4

LM339PW

LM339PWE4

LM339PWG4

LM339PWLE

LM339PWR

LM339PWRE4

LM339PWRG3

LM339PWRG4

LM339Y

16-Feb-2014

Status

(1)

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

OBSOLETE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

Package Type Package

Drawing

SOIC

SOIC

D

D

Pins Package

14

14

Qty

Eco Plan

(2)

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

SOIC

SOIC

D

D

14

14

2500 Green (RoHS

& no Sb/Br)

2500 Green (RoHS

& no Sb/Br)

PDIP N 14

PDIP

PDIP

SO

SO

SO

TSSOP

TSSOP

N

N

NS

NS

NS

PW

PW

14

14

14

14

14

14

14

25

25

25

Green (RoHS

& no Sb/Br)

Pb-Free

(RoHS)

Pb-Free

(RoHS)

TBD

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

90 Green (RoHS

& no Sb/Br)

90 Green (RoHS

& no Sb/Br)

ACTIVE

OBSOLETE

ACTIVE

ACTIVE

ACTIVE

ACTIVE

OBSOLETE

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

PW

PW

PW

PW

PW

PW

14

14

14

14

14

14

0

90 Green (RoHS

& no Sb/Br)

TBD

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

2000 Green (RoHS

& no Sb/Br)

TBD

Lead/Ball Finish

(6)

CU NIPDAU | CU SN Level-1-260C-UNLIM

CU NIPDAU

CU SN

CU NIPDAU

CU NIPDAU | CU SN Level-1-260C-UNLIM

CU SN

CU NIPDAU

Call TI

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

CU NIPDAU

Call TI Call TI

CU NIPDAU | CU SN Level-1-260C-UNLIM

CU NIPDAU

CU SN

CU NIPDAU

Call TI

MSL Peak Temp

(3)

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

N / A for Pkg Type

N / A for Pkg Type

Call TI

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Level-1-260C-UNLIM

Call TI

Op Temp (°C)

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

0 to 70

L339

L339

L339

L339

LM339

LM339

L339

L339

L339

Device Marking

(4/5)

LM339

LM339

LM339

LM339

LM339N

LM339N

LM339N

Addendum-Page 7

Samples

PACKAGE OPTION ADDENDUM

www.ti.com

16-Feb-2014

Orderable Device Status

(1)

Package Type Package

Drawing

Pins Package

Qty

Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

M38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510

/11201BCA

(1)

The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2)

Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)

(3)

MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4)

There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5)

Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device.

(6)

Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF LM139, LM139-SP, LM239A, LM2901, LM2901AV, LM2901V :

Addendum-Page 8

Samples

www.ti.com

Catalog: LM139

Automotive: LM239A-Q1 , LM2901-Q1 , LM2901AV-Q1 , LM2901V-Q1

Enhanced Product: LM239A-EP

Space: LM139-SP

NOTE: Qualified Version Definitions:

Catalog - TI's standard catalog product

Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects

Enhanced Product - Supports Defense, Aerospace and Medical Applications

Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application

PACKAGE OPTION ADDENDUM

16-Feb-2014

Addendum-Page 9

www.ti.com

TAPE AND REEL INFORMATION

PACKAGE MATERIALS INFORMATION

17-Jan-2014

*All dimensions are nominal

Device

LM139ADR

LM139DR

LM239ADR

LM239ADR

LM239DR

LM239DR

LM239DRG3

LM239DRG4

LM239PWR

LM2901AVQPWR

LM2901AVQPWRG4

LM2901DR

LM2901DR

LM2901DR

LM2901DRG3

LM2901DRG4

LM2901NSR

LM2901PWR

Package

Type

Package

Drawing

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

TSSOP

TSSOP

TSSOP

SOIC

SOIC

SOIC

SOIC

SOIC

SO

TSSOP

D

D

D

D

D

D

D

D

PW

PW

PW

D

D

D

D

D

NS

PW

Pins

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

SPQ

2500

2000

2000

2000

2500

2500

2500

2500

2500

2500

2500

2500

2500

2500

2500

2500

2000

2000

330.0

330.0

330.0

330.0

330.0

330.0

330.0

330.0

Reel

Diameter

(mm)

Reel

Width

W1 (mm)

330.0

16.4

330.0

330.0

16.4

16.4

A0

(mm)

6.5

6.5

6.5

330.0

330.0

330.0

330.0

16.4

16.4

16.4

16.8

6.5

6.5

6.5

6.5

330.0

330.0

330.0

16.4

12.4

12.4

12.4

16.4

16.8

16.4

16.8

16.4

16.4

12.4

6.5

6.9

6.9

6.9

6.5

6.5

6.5

6.5

6.5

8.2

7.0

B0

(mm)

9.0

9.0

9.0

9.0

9.0

9.0

9.5

9.0

10.5

5.6

9.0

9.5

9.0

9.5

9.0

5.6

5.6

5.6

K0

(mm)

P1

(mm)

2.1

2.1

2.1

2.1

2.3

2.1

2.3

2.1

1.6

1.6

1.6

2.1

2.1

2.1

2.3

8.0

W

(mm)

Pin1

Quadrant

8.0

16.0

8.0

16.0

8.0

16.0

8.0

16.0

8.0

16.0

8.0

16.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

16.0

16.0

12.0

12.0

12.0

16.0

16.0

16.0

16.0

2.1

8.0

16.0

2.5

12.0

16.0

1.6

8.0

12.0

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION

17-Jan-2014 www.ti.com

Device

LM2901PWR

LM2901PWRG3

LM2901PWRG4

LM2901VQPWR

LM2901VQPWRG4

LM339ADBR

LM339ADR

LM339ADR

LM339ADR

LM339ADRG4

LM339ANSR

LM339APWR

LM339DR

LM339DR

LM339DR

LM339DRG3

LM339DRG4

LM339PWR

LM339PWR

LM339PWRG3

LM339PWRG4

Package

Type

Package

Drawing

SO

TSSOP

SOIC

SOIC

SOIC

SOIC

SOIC

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

TSSOP

SSOP

SOIC

SOIC

SOIC

SOIC

TSSOP

TSSOP

TSSOP

D

D

D

PW

NS

PW

D

D

PW

DB

D

D

D

D

PW

PW

PW

PW

PW

PW

PW

Pins

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

SPQ

2000

2000

2500

2500

2500

2500

2500

2000

2000

2000

2000

2000

2000

2000

2500

2500

2500

2500

2000

2000

2000

Reel

Diameter

(mm)

Reel

Width

W1 (mm)

330.0

12.4

330.0

330.0

330.0

330.0

330.0

330.0

12.4

12.4

12.4

12.4

16.4

16.4

A0

(mm)

6.9

7.0

6.9

6.9

6.9

8.2

6.5

6.5

330.0

330.0

330.0

16.4

16.8

16.4

6.5

6.5

330.0

330.0

330.0

330.0

16.4

12.4

16.8

16.4

8.2

6.9

6.5

6.5

B0

(mm)

10.5

5.6

9.5

9.0

5.6

6.6

9.0

9.0

9.5

9.0

5.6

5.6

5.6

5.6

330.0

330.0

330.0

330.0

330.0

330.0

330.0

16.4

16.8

16.4

12.4

12.4

12.4

12.4

6.5

6.5

6.5

6.9

7.0

7.0

6.9

9.0

9.5

9.0

5.6

5.6

5.6

5.6

K0

(mm)

P1

(mm)

1.6

1.6

1.6

1.6

W

(mm)

Pin1

Quadrant

1.6

8.0

12.0

2.5

12.0

16.0

2.1

2.1

2.3

2.1

2.5

12.0

16.0

1.6

8.0

12.0

2.3

2.1

2.1

2.3

2.1

1.6

1.6

1.6

1.6

8.0

12.0

8.0

12.0

8.0

12.0

8.0

12.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

16.0

16.0

16.0

16.0

16.0

16.0

16.0

16.0

16.0

12.0

8.0

12.0

8.0

12.0

8.0

12.0

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Q1

Pack Materials-Page 2

www.ti.com

PACKAGE MATERIALS INFORMATION

17-Jan-2014

*All dimensions are nominal

Device

LM139ADR

LM139DR

LM239ADR

LM239ADR

LM239DR

LM239DR

LM239DRG3

LM239DRG4

LM239PWR

LM2901AVQPWR

LM2901AVQPWRG4

LM2901DR

LM2901DR

LM2901DR

LM2901DRG3

LM2901DRG4

LM2901NSR

LM2901PWR

LM2901PWR

LM2901PWRG3

Package Type Package Drawing Pins

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

SOIC

TSSOP

TSSOP

TSSOP

SOIC

SOIC

SOIC

SOIC

SOIC

SO

TSSOP

TSSOP

TSSOP

D

D

D

D

PW

D

D

D

D

PW

PW

D

D

D

D

D

NS

PW

PW

PW

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

SPQ

2500

2500

2500

2500

2500

2500

2500

2500

2000

2000

2000

2500

2500

2500

2500

2500

2000

2000

2000

2000

Length (mm) Width (mm) Height (mm)

367.0

367.0

333.2

367.0

333.2

367.0

364.0

333.2

367.0

367.0

367.0

333.2

364.0

367.0

364.0

333.2

367.0

364.0

367.0

364.0

367.0

367.0

345.9

367.0

345.9

367.0

364.0

345.9

367.0

367.0

367.0

345.9

364.0

367.0

364.0

345.9

367.0

364.0

367.0

364.0

38.0

38.0

28.6

38.0

28.6

38.0

27.0

28.6

35.0

35.0

35.0

28.6

27.0

38.0

27.0

28.6

38.0

27.0

35.0

27.0

Pack Materials-Page 3

PACKAGE MATERIALS INFORMATION

17-Jan-2014 www.ti.com

Device

LM2901PWRG4

LM2901VQPWR

LM2901VQPWRG4

LM339ADBR

LM339ADR

LM339ADR

LM339ADR

LM339ADRG4

LM339ANSR

LM339APWR

LM339DR

LM339DR

LM339DR

LM339DRG3

LM339DRG4

LM339PWR

LM339PWR

LM339PWRG3

LM339PWRG4

Package Type Package Drawing Pins

SO

TSSOP

SOIC

SOIC

SOIC

SOIC

SOIC

TSSOP

TSSOP

TSSOP

TSSOP

SSOP

SOIC

SOIC

SOIC

SOIC

TSSOP

TSSOP

TSSOP

D

D

D

PW

NS

PW

D

D

D

D

D

D

PW

PW

PW

DB

PW

PW

PW

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

14

SPQ

2000

2000

2500

2500

2500

2500

2500

2000

2000

2000

2000

2000

2500

2500

2500

2500

2000

2000

2000

Length (mm) Width (mm) Height (mm)

367.0

367.0

364.0

367.0

333.2

364.0

333.2

367.0

367.0

367.0

367.0

367.0

333.2

367.0

364.0

333.2

364.0

364.0

367.0

367.0

367.0

367.0

367.0

345.9

367.0

364.0

345.9

367.0

367.0

364.0

367.0

345.9

364.0

345.9

367.0

364.0

364.0

367.0

38.0

35.0

27.0

38.0

28.6

27.0

28.6

35.0

35.0

35.0

35.0

38.0

28.6

38.0

27.0

28.6

27.0

27.0

35.0

Pack Materials-Page 4

MECHANICAL DATA

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001

PLASTIC SMALL-OUTLINE DB (R-PDSO-G**)

28 PINS SHOWN

0,65

28

0,38

0,22

15

0,15

M

0,25

0,09

5,60

5,00

8,20

7,40

1

A

14

0

°

ā

8

°

Gage Plane

0,25

0,95

0,55

2,00 MAX

Seating Plane

0,10

0,05 MIN

PINS **

DIM

A MAX

14

6,50

16

6,50

20 24 28 30 38

7,50 8,50 10,50 10,50 12,90

A MIN

5,90 5,90 6,90 7,90 9,90 9,90 12,30

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.

C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.

D. Falls within JEDEC MO-150

4040065 /E 12/01

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products Applications

Audio

Amplifiers

Data Converters

DLP® Products

DSP

Clocks and Timers

Interface

Logic

Power Mgmt

Microcontrollers

RFID

OMAP Applications Processors

Wireless Connectivity www.ti.com/audio amplifier.ti.com

dataconverter.ti.com

www.dlp.com

dsp.ti.com

www.ti.com/clocks interface.ti.com

logic.ti.com

power.ti.com

microcontroller.ti.com

www.ti-rfid.com

www.ti.com/omap

Automotive and Transportation www.ti.com/automotive

Communications and Telecom www.ti.com/communications

Computers and Peripherals

Consumer Electronics

Energy and Lighting

Industrial

Medical

Security www.ti.com/computers www.ti.com/consumer-apps www.ti.com/energy www.ti.com/industrial www.ti.com/medical www.ti.com/security

Space, Avionics and Defense www.ti.com/space-avionics-defense

Video and Imaging

TI E2E Community

www.ti.com/wirelessconnectivity www.ti.com/video e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Copyright © 2014, Texas Instruments Incorporated

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement