SHOWER BASKET INSTALLATION INSTRUCTIONS

SHOWER BASKET INSTALLATION INSTRUCTIONS
SHOWER BASKET
INSTALLATION INSTRUCTIONS
Before installing, read entire Shower Basket Installation Instructions. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service
at 1-866-855-2284. If you need assistance or have questions while installing your shower basket, contact Customer
Service.
We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures. Signature Hardware
accepts no liability for any damage to the floor or walls, or for personal injury during installation.
TOOLS AND MATERIALS:
Pencil
Screwdriver
Level
Masking Tape
Drill
INSTALLATION
A
B
C
1. Determine the installation location and mark the location of the pilot holes using the mounting holes in the shower
basket. Use a level to verify that your basket is properly aligned.
Tip: Place a piece of masking tape in the installation location when marking the location of the mounting holes. This
will enable you to clearly see the outlines you are creating and help to keep your drill from damaging the mounting
surface.
2. Drill the pilot holes with the appropriate drill bit for the wall surface or material.
3. Insert the screws (B) into the screw jackets (C), and place in the mounting bracket.
4. Attach the shower basket to the wall by inserting the screws (B) into the pilot holes and securing with your drill or
screwdriver.
5. Once your shower basket is installed, screw the button covers (A) onto the screw jackets (C).
Shower Basket Installation Instructions
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement