U-Line 3000 SERIES Product manual

U-Line 3000 SERIES Product manual
QUICK START GUIDE
Modular 3000 Series
•
3018 CLR
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Refrigerator Drawers, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Integrated Panel
Instructions, Compliance Documentation and Product Warranty information are all available for reference and download at
u-line.com under Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
2
Safety and Warning
2
Environmental Requirements
3
Water Hookup
4
Drain
6
Door Swing
7
General Installation
8
Control Quick Guide
8
First Use
8
Ice
10
Sabbath Mode
10
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Clear Ice Machines
U-3018CLRS-00A
U-3018CLRS-01A
U-3018CLRS-40A
U-3018CLRS-41A
U-3018CLRINT-00A
U-3018CLRINT-01A
U-3018CLRINT-40A
U-3018CLRINT-41A
Visit http://www.u-line.com/product-literature/userguides or scan this
QR code to view all user guides online.
1
QUICK START GUIDE
u-line.com
Safety and Warning
Environmental Requirements
NOTICE
This unit is designed to operate between 50°F (10°C) and
100°F (38°C). Higher ambient temperatures may reduce
PLEASE READ all instructions before installing,
the unit’s ability to reach low temperatures and/or reduce
operating, or servicing the appliance.
ice production on applicable models.
Use this appliance for its intended purpose only and follow
For best performance, keep the unit out of direct sunlight
these general precautions with those listed throughout this
and away from heat generating equipment.
guide.
In climates where high humidity and dew points are
SAFETY ALERT DEFINITIONS
present, condensation may appear on outside surfaces.
Throughout this guide are safety items labeled with a
This is considered normal. The condensation will
Danger, Warning or Caution based on the risk type:
evaporate when the humidity drops.
! DANGER
! CAUTION
Danger means that failure to follow this safety
Damages caused by ambient temperatures of
statement will result in severe personal injury or
40°F (5°C) or below are not covered by the
death.
warranty.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
2
QUICK START GUIDE
u-line.com
Water Hookup
Do not use Teflon tape or joint compound on the
PREPARE PLUMBING
adequate seal. Other materials could cause
Please use the braided stainless steel water supply line
blockage of the valve.
water fitting. The rubber washer provides an
which comes attached. The water line is fitted with a
standard 1/4" (6.35 mm) compression fitting.
Failure to follow recommendations and
instructions may result in damage and/or harm,
flooding or void the product warranty.
! WARNING
! CAUTION
Prior to installation, determine if this product
contains a gravity style drain or factory installed
drain pump. Products without a drain pump may
Turn off water supply and disconnect electrical
only use a gravity style drain. Failure to connect
supply to unit prior to installation.
water supply or drain line connections properly
may result in water leakage, personal injury,
1. Turn off water supply and disconnect electrical supply
and/or property damage. Disconnect power and
to product prior to attempting installation.
turn off water to the unit before attempting to
alter these connections. These connections are
the responsibility of the owner and must be
2. Locate the desired cold water supply location.
connected per local plumbing code. If you are
uncertain of how to safely and properly install
this product, contact a licensed plumber.
3. Locate braided stainless steel
water supply line and connect
to your cold water supply. The
Water Supply Connection
water line should be looped into
2 coils. This will allow the unit
! CAUTION
to be removed for cleaning and
servicing. However, make
Review, obey, and understand the local
certain that the tubing is not
plumbing codes before you install your unit.
pinched or damaged during installation.
Connect to the cold water supply. The water
pressure should be between 20 and 120 psi. The
4. Turn on water and check for leaks.
water line MUST have a shut-off valve on the
supply line.
! CAUTION
Do not use any plastic water supply line. The line
is under pressure at all times. Plastic may crack
or rupture with age and cause damage to your
home.
3
QUICK START GUIDE
u-line.com
5. Route water supply line in cable clamp and secure with
NOTICE
screw.
Drain can NOT be located directly below the unit.
Unit has a solid base that will not allow the unit
to drain below itself.
There is a possibility that hose connections may
have loosened during shipment.
Verify all connections and fittings are free from
leaks.
GRAVITY DRAIN
Normal
Proper Drain
With Trap
Poor Drainage, Water Will Back Up
Drain
Models ending in (-00A, -01A) will not be equipped with
With Trap and Vent
Proper Drain
factory installed drain pump.
Models ending in (-40A, -41A) will have the factory
A gravity drain may be used if:
installed drain pump.
Drain line has at least a 1" drop per 48" (approximately
2 cm drop per 100 cm) of run.
DRAIN CONNECTION
Drain line does not create traps and is vented per local
! CAUTION
code.
If your U-Line unit did not come with a factory
1. Cut the pre-installed drain tube to length.
installed drain pump you must use a gravity
style drain connection. For assistance in
2. Connect to your local plumbing per the local code.
determining if your unit has a pump please
contact U-Line. The floor drain must be large
enough to accommodate drainage from all
3. If necessary, insulate drain line to prevent
attached drains. Follow these guidelines when
condensation.
installing drain lines to prevent water from
flowing back into the ice maker storage bin and/
or potentially flowing onto the floor, which may
result in personal injury or property damage.
4
QUICK START GUIDE
u-line.com
Y-Branch Tailpiece
P60 Pump Required
! CAUTION
Air Gap
(Optional Hook-Up)
Failure to connect water supply or drain line
connections properly can result in personal
injury and property damage. Gravity drain
connections must be routed downward from the
Waste
rest of the unit at the rate of 1/4" per foot (1 cm
6KXW2ɞ
Valve
per 50 cm).
Hot
Water
Cold
Water
FACTORY INSTALLED DRAIN PUMP
If your drain line will run up to a stand pipe, disposal or
spigot assembly, or does not otherwise meet the
NOTICE
requirements for a gravity drain, you may have ordered a
The maximum lift for the P60 drain pump is
pre-installed U-Line P60 drain pump.
10 feet. This must be done as close to the rear of
the unit as possible.
See below for typical installations requiring a drain pump.
Stand Pipe
P60 Pump Required
Waste
6KXW2ɞ
Valve
Hot
Water
Cold
Water
Waste
Disposal Assembly
P60 Pump Required
Air Gap
(Optional Hook-Up)
Waste
Hot
Water
Cold
Water
6KXW2ɞ
Valve
5
QUICK START GUIDE
u-line.com
Door Swing
Wall
Units have a zero clearance when installed adjacent to
1/4" (6 mm)
cabinets.
For Integrated models that are installed adjacent to a wall,
1/4" (6 mm) clearance is recommended from wall on
hinge side to allow the door to open 90°. Allow for
additional space for any knobs or pulls installed on the
integrated panel/frame.
Stainless Steel models that are installed adjacent to a wall
require 2-1/4" (57 mm) door clearance on hinge side to
90°
Door Swing
allow for door handle.
Space Required
For any Knobs or Pulls
Integrated
2-1/4" MIN
Wall
(57 mm MIN)
90°
Door Swing
Stainless
6
QUICK START GUIDE
u-line.com
General Installation
INSTALLATION TIP
If the room floor is higher than the floor in the cut-out
LEVELING INFORMATION
opening, adjust the rear feet to achieve a total unit rear
1. Use a level to confirm
height of 1/8" (3 mm) less than the opening’s rear height.
the unit is level. Level
Shorten the unit height in the front by adjusting the front
should be placed along
feet. This allows the unit to be gently tipped into the
top edge and side
edge as shown.
opening. Adjust the front feet to level the unit after it is
1
correctly positioned in the opening.
INSTALLATION
1. Plug in the power cord.
2
2. Gently push the unit into position. Be careful to not
entangle the power cord, water line and drain line.
2. If the unit is not level, remove grille and adjust feet as
necessary. Use included tool to adjust the height of the
rear leveler feet. Turn screw clockwise to raise the rear
3. Re-check the leveling, from front to back and side to
foot, counter-clockwise to lower.
side. Make any necessary adjustments. The unit’s top
surface should be approximately 1/8" (3 mm) below
the countertop.
3. Confirm the unit is level after each adjustment and
repeat the previous steps until the unit is level.
4. Install the anti-tip bracket.
5. Remove the tape from the glass shelves and wipe out
the inside of the unit with a clean, water-dampened
cloth.
Rotate Forward Feet to Adjust
Rotate Clockwise to raise rear leg.
Rotate Counter-Clockwise to lower leg.
7
QUICK START GUIDE
u-line.com
Control Quick Guide
Actual Display:
Zone Toggle
Up
Select
ICE PRODUCTION
Power
U-Select Lighting
Down
Control Function Guide:
FUNCTION
COMMAND
DISPLAY/OPTIONS
OFF
Press
and hold
Display will count down from 5 to off.
ON
Press
and release
Unit will come on immediately.
Adjust lighting
Press
to adjust lighting
Press
or
to set low, medium or high.
Customer menu
Press
and hold for 5 seconds
Press
or
to scroll through menu.
Service menu
Press
or
Press
or
to scroll through menu.
and hold for 5 seconds
First Use
Ice
All U-Line controls are preset at the factory. Initial startup
ICE CUBE THICKNESS ADJUSTMENT
requires no adjustments.
NOTICE
NOTICE
Ice thickness adjustment should only be made
U-Line recommends discarding the ice produced
one increment at a time. Allow ice maker
during the first two to three hours of operation
production to stabilize for 24 hours before
to avoid possible dirt or scale that may dislodge
rechecking ice thickness.
from the water line.
Remove all ice from the storage bin.
When plugged in, the unit will begin operating under the
factory default setting. Follow the on screen prompt for
Ice cubes in any given batch will vary, so it is necessary
language selection and temperature units.
To turn the unit off, press
to choose cubes from the sample area for comparison
when making adjustments.
and hold for 5 seconds and
release. The display will show a countdown to switching the
The ice cube thickness is factory set for best overall
unit off.
performance. The factory setting “0” is designed to
To power your unit on, simply press
maintain an ice bridge of approximately 1/16" to 1/8"
. The unit will
(1.6 mm to 3.2 mm) under normal conditions, resulting in
immediately switch on.
a dimple of approximately 1/4" to 1/2" (6.4 mm to
8
QUICK START GUIDE
u-line.com
ICE ADJUST
12.7 mm) in depth. A fuller cube with less of a dimple
results in a thicker ice bridge. As the ice bridge thickens,
Up
the tendency for the cubes to stay together as a slab
Select
increases. A bridge thicker than 1/8" (3.2 mm) may cause
RETURN TO MENU
ICE ADJUST
ICE ADJUST = 0
cubes to overfill the ice bucket.
Down
Adjust ice thickness as follows:
DIMPLES
1. Press
and
and hold for 5 seconds to enter the
Customer Menu.
2. Press
ICE BRIDGE
3. Press
Ice Bridge and Dimples
Your clear ice machine is pre-set to produce ice between
4. Press
the optimal dimensions illustrated below:
to select “Ice Adjust”.
. The selection will begin to flash.
to make the ice thicker or
thinner. Press
to make the ice
to confirm your choice.
Cube Types
1/4" TO 1/2"
(6.4 mm to 12.7 mm)
DIMPLE
1/16" TO 1/8"
(1.6 mm to 3.2 mm)
ICE BRIDGE
The total range of adjustment is -5 (thinest) to +5
(thickest). If further adjustments are desired, repeat
Steps 1 through 4.
THIN BRIDGE
DEEP DIMPLE
THICK BRIDGE
LITTLE OR
NO DIMPLE
9
QUICK START GUIDE
u-line.com
Warranty
U-LINE CORPORATION LIMITED WARRANTY
Sabbath Mode
1. U-Line Corporation (“U-Line”) warrants each U-Line
product to be free from defects in materials and
workmanship for a period of one year (two years on
Up
Modular 3000 Series) from the date of purchase.
U-Line further warrants the sealed system (consisting
RETURN TO MENU
SABBATH MODE
OFF?
of the compressor, condenser, evaporator, hot gas
bypass valve, dryer, and connecting tube) in each
U-Line product to be free from defects in materials and
Power
workmanship for a period of five years from the date of
Down
purchase.
U-Line Clear Ice Machine models are Star-K certified and
can be used during the Sabbath. View a full list of Star-K
certified U-Line units at www.star-k.org.
2. During the initial one year warranty period (two years
on Modular 3000 Series) for all U-Line products U-Line
shall: (1) repair any product or replace any part of a
To prepare the unit for the Sabbath:
product; and (2) for all Marine, RV and Domestic
U-Line products sold and serviced in the United States
1. Press
and hold until the unit turns off.
(including Alaska and Hawaii) and Canada, U-Line
shall be responsible for the labor costs performed by a
U-Line authorized service company, incurred in
2. No new ice will form when the unit is off, but previously
connection with the replacement of any defective part.
made ice will still be accessible/present for over 24
During years two through five of the warranty period
hours. Pump equipped models will continue to remove
for the sealed system, U-Line shall: (1) at U-Line’s
water as needed even if the unit is off.
Sabbath Mode remains active until
option repair or replace any part of the sealed system;
and (2) for all Marine, RV and Domestic U-Line
is pressed again
products sold and serviced in the United States
and the unit turns on.
(including Alaska and Hawaii) and Canada, U-Line shall
be responsible for the labor costs incurred in
connection with the replacement of any defective part
of the sealed system. All other charges, including
transportation charges for replacements under this
warranty and labor costs not specifically covered by
this warranty, shall be the responsibility of the
purchaser. This warranty extends only to the original
purchaser of the U-Line product. The Product
Registration Card included with the product should be
promptly completed by you and mailed back to U-Line
or you can register on-line at www.u-lineservice.com.
3. The warranty listed above does not apply to floor
display models. The warranty for these models shall
be 30 days from the date of retail purchase and only if
U-Line’s Product Registration Card included with the
10
QUICK START GUIDE
u-line.com
unit is completed and mailed back or electronically
of pool water, or directing a spray from a hose or
submitted to U-Line. This 30 day warranty does not
similar device into and around the unit.
apply to cosmetic damages. A proof of purchase may
be required.
7. If a product defect is discovered during the applicable
warranty period, you must promptly notify either
4. The following conditions are excluded from this limited
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin
warranty: use of cleaners other than the recommended
53223 USA or at +1.800.779.2547 or the dealer from
stainless steel cleaners and U-Line Clear Ice Maker
whom you purchased the product. In no event shall
cleaner; installation charges; damages caused by
such notification be received later than 30 days after
disasters or acts of God, such as fire, floods, wind and
the expiration of the applicable warranty period. U-Line
lightning; damages incurred or resulting from shipping,
may require that defective parts be returned, at your
improper installation, unauthorized modification, or
expense, to U-Line’s factory in Milwaukee, Wisconsin,
misuse/abuse of the product; customer education
for inspection. Any action by you for breach of
calls; food loss and spoilage; door and water level
warranty must be commenced within one year after
adjustments (except during the first 30 days from the
the applicable warranty period.
date of installation); defrosting the product; adjusting
the controls; door reversal; and cleaning the
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
condenser.
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR IMPLIED WARRANTY OF
5. U-Line products are designed to operate in ambient
temperatures between 50°F and 100°F unless
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
otherwise noted in the product manual. Exposure to
ARE DISCLAIMED. U-Line’s sole liability and your
temperatures outside this range may cause
exclusive remedy under this warranty are set forth in
degradation of performance and issues such as lower
the paragraphs above. U-Line shall have no liability
ice production or spoiled contents that are not covered
whatsoever for any incidental, consequential or special
under the terms of this warranty as a result of that
damages arising from the sale, use or installation of
exposure. U-Line product may not be subjected to
the product or from any other cause whatsoever,
temperatures below 40°F without following the
whether based on warranty (express or implied) or
winterization and vacation shutdown procedures in the
otherwise based on contract, tort or any other theory
user guide.
of liability.
Some states do not allow limitations on how long an
6. U-Line’s Outdoor Limited Warranty, set forth in this
Paragraph 6, shall apply to U-Line models deemed
implied warranty lasts or the exclusion or limitation of
suitable for outdoor use by Underwriters Laboratory
incidental or consequential damages, so the above
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
limitations may not apply to you. This warranty gives you
website and/or on the serial tag located inside the
specific legal rights, and you may also have other rights
product.
which vary from state to state.
A. Outdoor product may come into contact with rain by
Warranty 6/2014 Rev.G
virtue of outdoor use. Exposure to other sources of
water shall also cause this warranty to be void,
including flooding of the area in proximity of the unit
greater than 1/8" deep in water, hurricanes, splashing
Copyright © 2014 U-Line Corporation. All Rights Reserved.
Publication Number 30426 8/2014 Rev.A
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement