DeWalt DC727-XE User manual

DeWalt DC727-XE User manual
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Tools & Tool Storage
Power Tools & Accessories - contents
73 Hand Tools
1706
74 Handlamps & Torches
1841
76 Tool Kits & Tool Storage
1877
Cordless
1853
1853
Corded
1860
77 Cutting & Machine Tools,
Vices & Clamps
1894
Mini Power Tools
1865
78 Workshop Equipment
1902
Power Tool Accessories
1868
Air Tools
1872
79 Soldering, Desoldering &
SMT Equipment
1904
75
Visit our website for additional price information and exciting promotions
1851
www.nguyenxuong.com
3.0 Ah BATTERY
3 YEAR WARRANTY
**
3 SPEED TRANSMISSION
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Stock no.
a710-8713
Bosch Drills
No Load Speed: 0-585 rpm
Spindle lock & motor brake
Max Torque 5 Nm (13 Nm hard joint)
Weight of tool: 1.1 kg
Comes with bag, 2 x 1.3Ah Lithium-ion batteries, 30 minute charger, 2 screw bits and holster
Supplied with: 2 x 1.3Ah Li-Ion Batteries, Quick Charger and toolbag.
10.8 V(dc)
in.
Yes
Product Description
Stock no.
GWI 10.8 (Aus/NZ)
163-946
Price per
unit
0 → 585 rpm
1.1 kg
Speed
Weight
OM
S$
1+
345·00
Description
S$
S$
Plug Type
Australian/New Zealand 3 pin
1⁄4 in.
0-3000ipm
M12 (M4-M12)
<1 kg
Chuck Capacity
Impact Rate
Maximum Screw Size
Weight
Stock no.
163-956
Price per
unit
OM
S$
1+
400·00
S$
S$
539-387
Stock no.
British 3 pin BS 1363
539-397
Price per
unit
Chuck Capacity
Free Speed
Weight
OM
S$
1+
760·00
13 mm
1450 rpm
1.7 kg
S$
10.8V Li-Ion Screwdriver (GSR 10.8V-LI)
Short and powerful screwdriver with great
performance to size ratio. Short head length
(143mm) for better balance and control. Ideal
for working in tight areas.
LED light for work-piece illumination
20+ 1 clutch settings
Universal bit holder - E6 + C6 bits
Variable speed trigger
Electronic Cell Protection
Battery protection against deep discharge, overheating &
overloading
Softgrip for secure handling
Second generation battery cells
475 screws per battery charge into particle-board (3.5 x 35mm)
160 screws per battery charge into soft wood (6 x 60mm)
Supplied with: 60 min charger, 2 x 1.3Ah Li-Ion batteries.
Chuck Capacity
Drilling Capacity
Speed
Voltage
Battery Type
1⁄4
in.
19 mm
1300 rpm
10.8 V
Li-Ion
Chuck Type
Free Speed
Plug Type
Type
606-0755
OM
S$
S$
S$
1+
340·00
unit
13 mm
40 mm
14 mm
10 mm
Price per
Chuck Type
Chuck Size
Weight
OM
S$
1+
810·00
unit
75
Auto Lock
1.5 → 13 mm
2.6 kg
S$
S$
S$
S$
S$
S$
36V Li-Ion SDS Hammer Drill
Supplied with: 4 piece drill bit set, 2 x Li-Ion batteries, 30 min Li-Ion charger, carry case
Plug Type
Price per
Drilling Capacity -Steel
Drilling Capacity -Wood
Drilling Capacity -Masonry
Maximum Screw Size
Stock no.
2 speed gear box with solid metal gears
Dura-shield housing - will protect even after a 2m drop onto
concrete
Softgrip pads for comfort
Metal clutch ring with 20 settings plus drill mode
No Load Speed: 450/1450rpm
Maximum drilling diameter of 13mm Steel; 32mm wood
13mm auto lock chuck
LED light
No Load Speed: 450/1450rpm
Maximum drilling diameter of 13mm Steel; 32mm wood
2 x 2.6Ah Lithium Ion batteries with electronic cell protection
13 mm
32 mm
7 mm
Auto Lock
335·00
S$
14.4V Li-Ion Combi Drill (GSB 14.4 VE-2
LI)
14.4V Li-Ion Drill Driver (GSR 14.4 V-LI)
Drilling Capacity -Steel
Drilling Capacity -Wood
Maximum Screw Size
Chuck Type
1+
S$
High efficiency motor draws less energy resulting in longer
runtime
Electronic Motor Protection for outstanding protection against
motor burn out
80% charge in 15 minutes, 100% charge in 30 minutes with
charger supplied
Unique progressive clutch allows fine torque adjustment for
small screw diameters plus coarse adjustment for larger screws
World first fan cooled gear train for long tool life
Dura-shield housing will protect even after a 2m drop onto
concrete
Double wound Bosch built motor for excellent overload
capacity
Built in LED light for work in badly illuminated, hard to reach areas
1.5-13mm Auto Lock chuck
25+ drilling torque settings
75 Nm max torque
380/ 1700 rpm no load speed
25,500 bpm impact rate
2 x 2.6Ah Lithium Ion batteries with electronic cell protection
Supplied with: 30 min charger, 2 x 2.6Ah Li-Ion batteries, carry case
Electronic Cell Protection regulates voltage and temperature for
longer battery life
3 spot LED for working in dark or compact areas
Rubber gear cover and nose cone for gear box and material
protection
Rubber side stopper prevents material dalmage or slipping
Double layer gear box for maximum performance at smallest
size
Optimised ventilation for effective heat management
Durable housing protects even after 2m drop
Maximum Torque 100Nm
Charge time of 30mins
Weighs less than 1 kg
Supplied with: Carry case, 2 x 1.3 Ah Li-Ion battery, magnetic bit holder and charger
10.8 V
Li-Ion
Hex
0-1800 rpm
Stock no.
GSR10.8V (Aus/Nz)
10.8V Li-Ion Impact Driver (GDR 10.8VLI)
Voltage
Battery Type
Chuck Type
Speed
S$
Lithium-ion technology allows fast charging and fade-free battery life
for the GSR10.8V cordless screwdriver.
Lithium-ion battery has no memory effect and negligible selfdischarge
Electronic cell protection for battery - no overheating or overloading
30 min. charge time (70% charge in 15 min. with "Turbocharge")
Clutch ring with 10 torque settings and one drill mode
Max torque: 7 Nm, Max torque (hard joint) 18 Nm
No load speed: 0-400
Sturdy gearing with spindle lock
Electronic switch and LED light
Strong magnetic bit holder
Compact and light weight (800g) with softgrip handle
Supplied with: Handy bag with holster
Compact and lightweight screwdriver with a 5-position
pivoting head. It also features a motor brake - perfect for
serial screwdriving and precison work, an electronic clutch
with 7+1 settings, 1⁄4" clic-change bit holder, and a hanging
hook for easy storage while you work. Plus the lithium-ion
batteries give extra long life and fast charging times.
1⁄4
unit
OM
10.8V Lithium Ion Screwdriver
10.8V Li-ion Adjustable Drill/Driver
Battery Voltage
Chuck Size
Reversible Action
Price per
Hex Bit Holder
1300 rpm
European 2 pin CEE 7⁄16
Screwdriver
S$
The GBH 36V LI professional SDS hammer drill uses lithiumion battery technology to provide the same power as that of
corded tools.
Lithium-ion battery has no memory effect and negligible
self-discharge
Electronic cell protection for battery - no overheating or
overloading
45 minute charging time
High impact rate - up to 4260bpm, with impact force of 3
joules
Integrated high-perfomance chiselling action
Toolholder can be changed without disassembling the tool
Softgrip handle
No load speed: 0-960 rpm, weight 4.3kg
Available with either BS1363 type or Aus/Nz mains plug fitted
Supplied with: 2 x 2 Ah Lithium-Ion battery pack
Plug Type
Stock no.
British 3 pin BS 1363
Australian/New Zealand 3 pin
534-8896
629-0619
Price per
unit
unit
OM
S$
1+
1+
1330·00
1530·00
OM
S$
1+
475·00
Accessories
Description
Stock no.
Li-Ion Battery
534-8919
Price per
unit
24V Drill Driver (GSR 24VE-2)
Max torque 65Nm
15 torque settings
Variable speed
Reversible
Keyless Auto lock chuck (1.5-13mm)
Drilling dia. in steel : 15mm, wood: 38mm
Soft grip for comfortable and optimum handling
Spare batteries are available separately
Supplied with: 1 hr charger,2 x 2Ah NiCd batteries
Voltage (V)
24
Battery Type
Charge Time Reversible No Of Torque
(hours)
Action
Settings
2 x 2 Ah NiCd 1
Yes
15
Description
GSR24 VE-2 (Aus/NZ)
Stock no.
488-5417
Price per
unit
OM
S$
1+
770·00
Visit our website for additional price information and exciting promotions
Speed (rpm)
Bosch Part No.
0 - 1300 (No
Load)
GSR24-VE2
S$
S$
1853
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Percussion Drill 24V (GSB 24VE-2)
14.4 V Drill Driver (GSB 14-4VE-2)
This heavy duty cordless combi-drill is a versatile multifunction
tool for impact drilling, drilling and screw-driving. Optimised
impact mechanism with high impact rate for rapid drilling in
masonry.
15 torque settings
Variable speed
Two speed gearbox
Reversible
Keyless Auto lock chuck (1.5-13mm)
Drilling dia concrete 12mm
Ergonomic soft grip
Bosch 3-year warranty available on-line
Supplied with: Quick charger, 2 x 2.6Ah HiMH batteries
Voltage Battery
Reversible
Impact Rate
No Of Torque
(V)
Type
Action
(bpm)
Settings
14.4
NiMH
Yes
0 - 21000
15
Chuck Capacity
1.5 → 13 mm
Drilling Capacity
Wood: 40 mm; Masonry: 14 mm; Steel: 13 mm
Plug Type
Stock no.
British 3 pin BS 1363
383-904
Price per
unit
The new 24V combi, a powerful machine for impact
drilling, rotary drilling and screw driving
New impact mechanism for fast drilling in brickwork
Max torque 55Nm with 15 torque settings
Drilling dia. in steel/wood/masonry, 14/36/17mm
respectively
Auto lock for easy bit changing with only one hand
Auxilliary handle can be fitted on both left and right
Spare batteries available separately
Speed
Manufacturers Part
(rpm)
No.
0-1950
GSB 14-4 VE-2
Speed 0-470; 0-1950 rpm
OM
S$
1+
630·00
S$
S$
14.4V Drill Driver (GSR 14.4-2)
A lightweight but powerful compact 14.4V Drill Driver for overhead work
and for working in tight spaces.
14.4V
2-Speed variable and reverse
20 torque settings + drilling
10mm keyless chuck
3 x 1.5Ah NiCad batteries
Supplied with: 3 x 1.5 Ah NiCad batteries, carry case and charger.
75
Chuck Capacity 1.5 → 10 mm
Free Speed 1920 rpm
Drilling Capacity Steel 13mm/ Wood 40mm/ Masonary 14 mm Chuck Type Keyless
Speed
0 → 470; 0 → 1920 rpm
Product Description
Stock no.
GSR14.4-2 (BS1363)
383-897
Price per
unit
OM
S$
1+
395·00
Product Description
Stock no.
GSB24VE-2 (Aus/NZ)
462-9734
S$
unit
OM
S$
1+
990·00
S$
S$
18 Volt Cordless Combi Drill (GSB
18VE2)
Flexible Dura-Shield
housing to protect
against kicks
Variable speed
Reversible
Keyless chuck (1.513mm)
Advanced metal
planetary gears
guarantee optimum
power and long service life
Supplied with: Quick charger, 2 x 2.6Ah NiMH batteries
Voltage No-load speed Drilling Capacity,
Drilling Capacity,
Wood
Steel
18V
0-500 & 0-18000 35 mm
13 mm
rpm
Plug Type
S$
Price per
Stock no.
British 3 pin BS 1363
Australian/New Zealand 3 pin
383-910
541-182
Price per
unit
unit
Reversible
Action
Yes
OM
S$
1+
1+
750·00
640·00
Impact
Max
Rate
Torque
070Nm
21000ipm
S$
S$
Cordless Rotary Hammer (GBH24VFR)
14.4V Drill Driver (GSR 14.4VE2)
24V SDS Rotary Hammer
Max drilling capacity; wood: 20mm, steel: 10mm,
concrete: 20mm
Includes quick change chuck for normal bits
Comes complete with 15 accessories
Overload clutch
Electric motor brake
Batteries available separately
Supplied with: Quick charger, 1 x 3Ah & 1 x 1.7Ah NiMH
batteries
Bosch cordless heavy duty Drill Driver complete with 2 batteries.
High torques of up to 60 Nm
2-speed planetary gears with solid metal planetary gears
"Dura-Shield" housing means driver is fully functional even after a
2m drop onto concrete
25 torque settings + drill setting
Carbon brushes that can be changed externally
Keyless chuck with Auto-Lock and click acoustics
Ergonomic centre grip and switch with softgrip
Forward/reverse rotation
Switch-on lock
Run-out brake
Supplied with: Quick charger, 2 x 2.6Ah NiMH batteries.
1.5 → 13 mm
Steel 13mm/ Wood 40 mm
0 → 470; 0 → 1920 rpm
Chuck Capacity
Drilling Capacity
Speed
Product Description
Stock no.
GSR 14.4VE2 (BS1363)
383-908
Price per
unit
Free Speed
Chuck Type
OM
S$
1+
630·00
S$
14.4V Drill Driver
Soft rubber grip for maximum comfort
13mm keyless chuck (with spindle lock)
Power
Maximum Torque settings
torque
14V 2.0 Ah battery
47 Nm
15 (1 drill setting)
Stock no.
GBH24VFR (BS1363)
386-9521
Price per
OM
S$
1+
1370·00
unit
S$
S$
IXO 2
1920 rpm
Keyless
S$
Product Description
1⁄4 Hex keyless drive
3.6V lithium-ion battery
Soft grip
Forward and reverse LED indicator
Max screw size 6mm
Supplied with: Metal storage box, Philips and Pozidriv bits
nos 1, 2 and 3, Slotted bit sizes 4, 5, and 6mm, 1 x Robertson
square drive, charger / toolholder
Gears
2
Description
IXO 2, 3.6V (BS1363)
IXO 2, 3.6V (Aus/NZ)
Stock no.
Price
per
OM
S$
506-3668
517-5531
unit
unit
1+
1+
88·00
92·00
S$
S$
Hitachi Drills
Description
GSR14.4VE2 (Aus/NZ)
Stock no.
484-1091
Price per
OM
unit
1+
S$
590·00
OM
S$
S$
18V Li-Ion Drill Driver (DS18DL)
Long life - unique protection circuit gives up to 1300 battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting, compatible with existing Hitachi cordless
tools
’Save power’ mode reduces power to 55% - ideal for drilling
smaller holes
High maximum torque
Handy belt hook incorporating LED spotlight
Single sleeve metal chuck with ratcheting lock
Spindle lock for greater control with screwdriving
Fan cooled charger extends battery life
Supplied with: Two 3.0Ah Li-Ion batteries, UC18YRL fan cooled
charger, side handle, driver bit, carrying case
Speed
Drilling Capacity -Wood
1854
OM = Order Multiple
0 → 1600 rpm
50 mm
Drilling Capacity -Steel
Maximum Torque (Nm)
13 mm
64 Nm
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Description
Description
18V Drill Driver, UK model
18V Drill Driver, Aus/NZ
Stock no.
476-983
542-983
Price per
OM
S$
1+
1+
830·00
760·00
unit
unit
S$
S$
Stock no.
18V Hammer Drill, BS1363
18V Hammer Drill, Aus/NZ
Price per
476-993
543-009
unit
unit
OM
S$
1+
1+
990·00
890·00
S$
S$
18V Li-Ion Combi Drill (DV18DL)
14.4V Li-Ion Drill/Driver HD (DS14DL)
Hi spec combi drill with all new Lithium Ion batteries
’Save power’ mode reduces to 55% - ideal for drilling smaller
holes
High maximum torque
Handy belt hook incorporating LED spotlight
Single sleeve metal chuck with ratcheting lock
Spindal lock for greater control with screwdriver
Fan cooled charger extends battery life
Long life - unique protection circuit gives up to 1300 battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting compatible with existing Hitachi cordless
tools
Long life - unique protection circuit gives up to 1300
battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting, compatible with existing Hitachi
cordless tools
’Save power’ mode reduces power to 55% - ideal for
drilling smaller holes
High maximum torque
Handy belt hook incorporating LED spotlight
Single sleeve metal chuck with ratcheting lock
Spindle lock for greater control with screwdriving
Fan cooled charger extends battery life
Supplied with: Two 3.0Ah Li-Ion batteries, driver bit,
carrying case
Chuck Capacity
Drilling Capacity
Free Speed
Description
14.4V HD Drill/Driver UK
model
14.4V HD Drill/Driver Aus/NZ
Supplied with: 2 x 3.0Ah Lithium Ion batteries, side handle, driver bit & carry case.
For BS1363 plug version 476-987 see RS website
13 mm
Wood: 45 mm, Steel: 13 mm
1500 rpm
Stock no.
Price
per
Chuck Type
Voltage
OM
S$
477-019
unit
1+
750·00
542-973
unit
1+
690·00
Free Speed
Chuck Type
Chuck Capacity
Drilling Capacity -Masonry
Keyless
14.4 V
S$
S$
1600 rpm
Keyless
13 mm
16 mm
Description
Stock no.
18V Combi Drill, UK model
18V Combi Drill, Aus/NZ
476-987
542-995
Price per
unit
unit
Drilling Capacity -Wood
Drilling Capacity -Steel
Maximum Torque (Nm)
OM
S$
1+
1+
850·00
770·00
50 mm
13 mm
52 Nm
S$
S$
14.4V Li-Ion Combi Drill (DV14DL)
14.4V Li-Ion Drill/Driver (DS14DFL)
Hi spec combi drill with all new Lithium Ion batteries
’Save power’ mode reduces to 55% - ideal for drilling smaller
holes
High maximum torque
Handy belt hook incorporating LED spotlight
Single sleeve metal chuck with ratcheting lock
Spindal lock for greater control with screwdriver
Fan cooled charger extends battery life
Long life - unique protection circuit gives up to 1300 battery
cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting compatible with existing Hitachi cordless
tools
Supplied with: 2 x 3.0Ah Li-Ion batteries, side handle, driver bit & carry case.
For BS1363 plug version 477-025 see RS website
Long life - unique protection circuit gives up to 1300 battery
cycles
Light weight - 40% lighter than NiCad batteries
Standard battery fitting, compatible with existing Hitachi
cordless tools
31Nm maximum torque
Handy belt hook with bit holder
13mm keyless chuck
Two speed gearbox
Variable speed and reverse
Soft grip handle
0-400/ 12000min
Fan cooled charger with 20 minute charge time
For BS1363 plug version 476-977 see RS website
Chuck Capacity
Drilling Capacity
Description
14.4V Drill/Driver Aus/NZ
13 mm
Wood: 30 mm, Steel: 12 mm
Stock no.
542-977
Price per
Free Speed
Chuck Type
OM
S$
1+
380·00
unit
1200 rpm
Keyless
S$
S$
Long life - unique protection circuit gives up to
1300 battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting, compatible with existing
Hitachi cordless tools
High maximum torque of 140Nm
’Save power’ mode reduces power to 55%
Torque level maintained even in reverse
Handy belt hook incorporating LED spotlight
Fan cooled charger extends battery life
Supplied with: Two 3.0Ah Li-Ion batteries, UC18YRL fan cooled
charger,carrying case
For BS1363 plug version 477-015 see RS website
Description
14.4V Impact Drill, UK model
14.4V Impact Drill, Aus/NZ
3.0 Ah
in.
477-015
542-989
Chuck Type
Price per
OM
S$
1+
1+
830·00
750·00
unit
unit
Stock no.
477-025
542-999
Price per
unit
unit
OM
S$
1+
1+
790·00
660·00
45 mm
13 mm
S$
S$
S$
S$
S$
S$
All new ultra compact driver drill, ideal for working in confined
spaces
Light weight 10.8V 1.5Ah Li-Ion batteries
Automatic trigger operated LED spotlight
Variable speed motor
21 stage torque setting
6.35mm quick lock hex bit holder
Spindle lock for accurate tightening of screws
Soft grip handle
40 minute charger
Supplied with: 2 x BCL1015 batteries, UC10SFL charger, driver
bit, carrying case
Hex
S$
6.35mm (1⁄4 in.)
Chuck Capacity
S$
Stock no.
477-009
Price per
unit
OM
S$
1+
290·00
DS12DVF3 Drill Driver
18V SDS Li-Ion Hammer Drill
(DH18DL)
Long battery life - unique protection circuit gives up to
1300 battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting, compatible with existing Hitachi
cordless tools
Fastest drilling speed in its class
Two mode action - rotary drilling and hammer drilling
Compact & lightweight design
Variable speed & reverse
’Save power’ mode reduces damage to smaller bits
Electric brake
Belt hook with built-in LED light
Replaceable carbon brushes for longer motor life
Supplied with: 2 x 3.0Ah Li-Ion batteries, UC18YRL fan cooled charger, side handle, depth gauge and
carrying case
For BS1363 plug version 476-993 see RS website
Drilling Capacity -Steel
Drilling Capacity -Wood
Description
Drilling Capacity -Wood
Drilling Capacity -Steel
10.8V Li-Ion Screwdriver (DB10DL)
1⁄4
Stock no.
13 mm
1800 rpm
Keyless
14.4V Combi Drill, UK model
14.4V Combi Drill, Aus/NZ
14.4V Li-Ion Impact Drill (WH14DL)
Battery Capacity
Chuck Size
Chuck Capacity
Free Speed
Chuck Type
75
12V Drill/Screwdriver
10mm Keyless Chuck
2-Speed, Variable, forward & Reverse
Speed 0-400 & 0-1200rpm
22 Torque Settings - Maximum 34Nm
Capacity - 12mm Mild Steel, 30mm Soft Wood
Supplied with: 30 min Charger, 3 x1.4Ah Ni Cad Batteries,7-Piece Bit Set
& Carry Case
Manu. Part No.
DS12DVF3
Stock no.
621-0499
Price per
unit
OM
S$
1+
295·00
13 mm
18 mm
New products available online every week
1855
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Plug Type
Hitachi Saws
Stock no.
Australian/New Zealand 3 pin
Price per
541-239
OM
S$
1+
800·00
unit
S$
S$
S$
S$
14.4V Li-Ion Jigsaw (CJ14DL)
18V 13mm XRP Li-ion Hammer Drill
Long battery life - unique protection circuit gives up to 1300
battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting, compatible with existing Hitachi
cordless tools
Adjustable base tilts up to 45° right & left
Compact & lightweight design
Tool free blade release
Soft grip handle
LED spotlight
3 mode orbital action
Supplied with: 2 x 3.0Ah Li-Ion batteries, UC18YRL fan cooled
charger, blade, splinter guard, chip cover and carry case.
For BS1363 plug version 476-971 see RS website
Description
Stock no.
14.4V Jigsaw UK model
14.4V Jigsaw Aus/NZ
Price per
476-971
543-005
unit
unit
18 Volt XRP combination tool for heavy
duty applications
Frameless motor reduces size and
increases efficiency
3 speed selector for optimum performance
22 position adjustable torque control
13mm self tightening keyless chuck with automatic spindle
lock
Extra sensitive trigger and electronic brake
Supplied with: 40 minute charger, 2 x 2.0Ah Li-ion batteries,
multi position side handle & heavy duty carry case.
OM
S$
1+
1+
740·00
620·00
S$
S$
18V Li-Ion Jigsaw (CJ18DL)
75
Long battery life - unique protection circuit gives up to 1300
battery cycles
Light weight - 40% lighter than Ni-MH batteries
Standard battery fitting, compatible with existing Hitachi cordless
tools
Adjustable base tilts up to 45° right & left
Compact & lightweight design
Tool free blade release
Soft grip handle
LED spotlight
3 mode orbital action
Stock no.
a706-8599
Stock no.
18V Jigsaw UK model
18V Jigsaw Aus/NZ
Price per
477-003
543-015
unit
unit
OM
S$
1+
1+
900·00
800·00
S$
S$
DeWalt Drills
18V 13 mm Compact Cordless Drill
Driver
Plug Type
1.5 → 13 mm
38 mm
Stock no.
Australian/New Zealand 3 pin
541-233
Price per
unit
S$
1+
570·00
13 mm
S$
S$
17 position adjustable torque control for consistent screwdriving
into a variety of materials with different screw sizes
Compact, lightweight design
Powerful 18 Volt combination tool for hammerdrilling and
screwdriving applications
13 mm single sleeve keyless chuck with automatic spindle loc
Two speed settings, variable speed and reverse switch for
controllable use
High performance fan cooled motor for maximum power and
durability
All metal gearing for efficient power transmission and longer tool
life
LED light for improved visibilty
Exclusive Nano Phosphate Li-Ion battery pack provides 2000 charge cycles more than double that
of NiCd/NiMH pack
Compatible with all DEWALT 18 Volt battery packs
Supplied with: 40 minute charger, 2 x 2.0Ah Li-ion, 1 x 2.6Ah NiMH battery, heavy duty carrying case.
For BS1363 plug version 471-023 see RS website
Cross-reference to manufacturer’s part no.
1856
Description
UK model
Aus/NZ model
2.0 Ah
Drilling Capacity -Wood
13 mm
S$
1+
1070·00
22-position adjustable torque control with hammer action
3-speed gearbox
Single sleeve keyless chuck (1.5-13mm capacity) with
automatic spindle lock
High performance fan cooled motor
Soft grip surface on handle and switch
Supplied with: 30 minute charger, 2 x2.6Ah NiMH Battery pack,
2 x Screwdriver bit, Heavy duty carrying case
Plug Type
Stock no. Price
per
Australian/New Zealand 3 pin
Australian/New Zealand 3 pin
288-229
288-241
Plug Type
18V 13 mm Compact Cordless Hammer
Drill/Driver (DC727 KLVR)
DeWALT part no.
DC727 KLVR-GB
DC727 KLVR-XE
Battery Capacity
Drilling Capacity -Steel
unit
OM
unit
unit
OM
S$
1+
1+
820·00
930·00
S$
S$
17 position adjustable torque control
2 speed gearbox (0 - 425, 1450)
High performance fan cooled motor
10mm keyless chuck with electronic brake
Capacity: steel; 10mm, wood; 32mm
Torque 35Nm
Supplied with: 1 hr Charger, 2 x 1.3Ah Ni-Cd batteries, heavy duty
carrying case.
Drilling Capacity -Steel
OM
Price per
14.4V Heavy Duty Drill/Driver 13mm
Drill Kit (DC728KA)
Compact, lightweight design
17 position adjustable torque control for consistent screwdriving
into a variety of materials with different screw sizes
Two speed settings, variable speed and reverse switch for
controllable use
13mm single sleeve keyless chuck with automatic spindle lock
Electronic motor brake for added control
High performance fan cooled motor
All metal gearing for efficient power transmission and longer tool
life
LED light for improved visibilty
Exclusive Nano Phosphate Li-Ion battery pack provides 2000 charge
cycles, more than double that of NiCd/NiMH packs
Compatible with all DEWALT 18 Volt battery packs
Supplied with: 40 minute charger, 2 x 2.0Ah Li-ion, carrying case.
For BS1363 plug version 471-095 see RS website
Chuck Capacity
Drilling Capacity -Wood
1.5 → 13 mm
Keyless
0 → 500/ 0 → 1250/ 0 → 2000 rpm
0 → 8500/ 0 → 21250/ 0 → 34000bpm
13 mm
16 mm
50 mm
2.5 kg
Heavy Duty Hammer / Drill /Driver 13mm
Drill Kit
Supplied with: 2 x 3.0Ah Li-Ion batteries, UC18YRL fan cooled charger, blade, splinter guard, chip
cover and carry case.
For BS1363 plug version 477-003 see RS website
Description
Chuck Capacity
Chuck Type
Speed
Impact Rate
Drilling Capacity -Metal
Drilling Capacity -Masonry
Drilling Capacity -Wood
Weight
Stock no.
471-023
541-239
OM = Order Multiple a New product to range
38 mm
British 3 pin BS 1363
Australian/New Zealand 3 pin
Stock no.
Price
per
OM
S$
437-2488
288-235
unit
unit
1+
1+
540·00
550·00
S$
S$
14.4V 13mm Heavy Duty Drill/Driver
Compact, lightweight design
17 position adjustable torque control for consistent screwdriving
into a variety of materials with different screw sizes
Ergonomically designed trigger and rubber grip
13mm single sleeve keyless chuck with automatic spindle lock for
quick and easy bit change with one hand
Two speed settings,variable speed and reverse switch for
controllable use
Electronic motor brake for added control
High performance fan cooled motor for maximum power and
durability
All metal gearing for efficient power transmission and longer tool
life
LED light for improved visibilty
Supplied with: 1 hour charger, 3 x 2.6Ah NiMH batteries, heavy duty carrying case.
Drilling Capacity
Speed
Plug Type
British 3 pin BS 1363
Wood: 35mm, Steel: 13 mm
0 → 400; 0 → 1450 rpm
Stock no.
471-067
Price per
unit
OM
S$
1+
660·00
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
12V Drill Driver
12V Impact Wrench - DC840KBR
10 mm single sleeve chuck and spindle lock
Variable speed and reverse switch
Compact and lightweight design for working in confined
areas
Ergonomically designed trigger and rubber grip
Electric motor brake
Removable belt clip
Supplied with: 1 hour charger, 2x 1.3h batteries & carry case
Durable frameless high speed motor delivers up to 160 Nm of max
torque
All metal gearing for efficient power transmission and long tool life
Aluminium front housing provides greater heat dispersion increasing
motor life
Improved variable speed switch and electronic motor brake for
complete control for both setting and removing fasteners
1/2in. square drive allows for quick and easy bit changes
Compact body enables use in tight spaces
Rubber coated grip and rear of the tool to reduce surface vibration and
user fatigue
LED light for improved visibility of fastener
Supplied with: 30 minute charger, 2 x 2.6Ah NiMH batteries, heavy duty
carrying case.
Chuck Capacity
Chuck Type
Speed
Voltage
1 → 10 mm
Keyless
0 → 1200 rpm
12 V
Plug Type
Battery Type
Drilling Capacity -Metal
Drilling Capacity -Wood
Stock no.
British 3 pin BS 1363
684-3033
Price per
unit
NiCd
10 mm
25 mm
OM
S$
1+
240·00
S$
S$
12V Heavy Duty Drill Driver 10mm Drill
Kit (DC727KA)
17 position adjustable torque control
2 speed gearbox (0-425/1450)
High performance fan cooled motor
10mm Keyless chuck with electronic brake
Capacity: steel; 10mm, wood; 25mm
Torque 32Nm
Supplied with: 1 hour charger, 2 x 1.3Ah Ni-Cd batteries, heavy duty
carrying case.
Plug Type
Stock no.
British 3 pin BS 1363
437-2472
Price per
unit
OM
S$
1+
415·00
S$
S$
18V XRP Combi tool for heavy duty drilling and screwdriving
applications
3 speed selector
22 position adjustable torque control
13mm self tightening keyless chuck with automatic spindle lock
Extra sensitive trigger
Improved ergonomic design and rubber grip
White LED for improved visibility
Supplied with: 2 x 2.6Ah Ni-MH batteries & 40min fast charger
Plug Type
Stock no.
British 3 pin BS 1363
684-3049
Chuck Type
Drilling Capacity -Metal
Drilling Capacity -Wood
Keyless
13 mm
50 mm
Price per
OM
S$
1+
890·00
unit
British 3 pin BS 1363
340-9135
Price per
unit
OM
S$
1+
760·00
S$
S$
S$
S$
DW056K2-KE (Aus/NZ)
Stock no.
288-279
Price per
unit
OM
S$
1+
1000·00
S$
1+
1+
600·00
750·00
S$
S$
75
Manu. Part No.
Stock no.
DC845KBR-GB
DC845KBR-XE
471-055
541-217
Price per
unit
unit
OM
S$
1+
1+
670·00
620·00
S$
S$
S$
S$
14.4V XRP Combi tool
Frameless motor
Ultra smooth 3 speed selector
22 position adjustable torque control
13mm Self Tightening keyless chuck with automatic spindle
lock
Extra sensitive trigger
Improved ergonomic design and rubber grip
White LED for improved visibility
Dual Collar design for quick and easy changing between
hammer, drill and screw modes
Supplied with: 40 minute multi chemistry charger, 2x 2.6Ah
batteries, multi-position side handle & carrying case.
Battery Capacity
Battery Type
Charge Time
Chuck Size
2.6 Ah
NiMH
40 min
1.5 → 13 mm
Chuck Type
Drilling Capacity -Steel
Drilling Capacity -Wood
Stock no.
684-3036
Price per
unit
Keyless
13 mm
45 mm
OM
S$
1+
700·00
14.4V Compact Hammer Drill
(DC735KBVR)
Battery Capacity: fits Max Torque 135 Nm Impacts per Minute
2.0, 2.4, 2.6, 3.0 Ah
0-3000 ipm
No Load Speed 0- 1/2in (13mm) square Weight 2.2 kg
2400 rpm
drive
Description
OM
0 → 2400 rpm
British 3 pin BS 1363
Durable fan-cooled motor
Efficient all metal transmission
Aluminium front housing
Forward, reverse, variable speed & electronic motor brake
Modular component design
13mm (1/2in) square drive
Supplied with: 1 Hour charger, 2 x 2.4Ah XRP Ni-cd Batteries and
carry case
Power Output 220
Watts
Price per
unit
unit
Durable frameless high speed motor delivers up to 130 Nm of max
torque
All metal gearing for efficient power transmission and long tool life
Aluminium front housing provides greater heat dispersion increasing
motor life
Improved variable speed switch and electronic motor brake for
complete control for both setting and removing fasteners
6.35 mm keyless hex-drive allows for quick and easy bit changes
Compact body enable use in tight spaces
Rubber coated grip and rear of the tool to reduce surface vibration and
user fatigue
LED light for improved visibility
Supplied with: 30 minute charger,2 x 2.6Ah NiMH batteries, heavy duty
carrying case
Plug Type
18V Impact Wrench
Voltage 18 V
471-051
541-211
14.4V Heavy Duty Hammer Drill/Driver
(DCD935B2R)
2 speed gearbox (0-425 / 0-1200)
Reversable
Multiple grip soft touch switch
High performance fan cooled motor
10mm keyless chuck with electronic brake
Capacity: steel; 10mm, wood; 25mm
Torque 20Nm
Supplied with: 1 hour charger,2.0Ah Ni-Cd battery, Heavy duty carrying case.
Stock no.
Stock no.
DC840 KBR-GB
DC840KBR-XE
Speed
12V Heavy Duty Right Angled Drill
10mm
Plug Type
Manu. Part No.
12V Impact Driver - DC845KB
18 Volt Heavy Duty Drill/Driver
Chuck Capacity 1 → 13 mm
Speed
0-500 /0-1250 /0-2000 rpm
Battery Type
Ni-MH
0 → 2400 rpm
Sq drive
Speed
Chuck Type
S$
S$
Compact, lightweight design
17 position adjustable torque control for consistent
screwdriving into a variety of materials with different screw
sizes
Two speed settings, variable speed and reverse switch for
controllable use
Ergonomically designed trigger and rubber grip
13 mm single sleeve keyless chuck with automatic spindle lock
Electronic motor brake for added control
High performance fan cooled motor for maximum power and
durability
All metal gearing for efficient power transmission and longer
tool life
LED light for improved visibility
Supplied with: 1 hour charger, 3 x 2.6Ah NiMH batteries, heavy duty carrying case
For BS1363 plug version 471-083 see RS website
Battery Capacity
Drilling Capacity -Masonry
Description
DC735KBVR-XE (Aus/NZ)
2.6 Ah
13 mm
Stock no.
541-223
Price per
unit
Drilling Capacity -Steel
Drilling Capacity -Wood
OM
S$
1+
435·00
13 mm
35 mm
S$
S$
www.rssingapore.com
Many more leading brands from over 2,500 suppliers available online
1857
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
12V Compact Hammer Drill DC745KBVR
NiMH/NiCd Dewalt Batteries
DeWalt NiCd or NiMH batteries
Supplied with: 1 hour charger, 3 x 2.6Ah NiMH batteries, heavy
duty carrying case.
Compact, lightweight design
17 position adjustable torque control for consistent screwdriving
into a variety of materials with different screw sizes
Two speed settings, variable speed and reverse switch for
controllable use
Ergonomically designed trigger and rubber grip
13 mm single sleeve keyless chuck with automatic spindle lock
Electronic motor brake for added control
High performance fan cooled motor for maximum power and
durability
All metal gearing for efficient power transmission and longer tool life
LED light for improved visibility
Battery Capacity
Battery Type
2.6 Ah
NiMH
Description
Stock no.
DC745KBVR-GB (UK)
471-073
Price per
Charge Time
Chuck Size
OM
S$
1+
610·00
unit
1h
13 mm
S$
18V Heavy Duty Hammer Drill/Driver
(DCD925B2R)
75
18V XRP Combi tool
Frameless motor
Ultra smooth 3 speed selector
22 position adjustable torque control
13mm Self Tightening keyless chuck with automatic spindle
lock
Extra sensitive trigger
Improved ergonomic design and rubber grip
White LED for improved visibility
Dual Collar design for quick and easy changing between
hammer, drill and screw modes
Supplied with: 40 min multi chemistry charger, 2x 2.6Ah
batteries, multi-position side handle & carrying case.
Battery Capacity
Battery Type
Charge Time
Chuck Size
2.6 Ah
NiMH
40 min
1.5 → 13 mm
Plug Type
Chuck Type
Drilling Capacity -Steel
Drilling Capacity -Wood
Stock no.
British 3 pin BS 1363
684-3030
unit
Stock no.
British 3 pin BS 1363
Australian/New Zealand 3 pin
346-7232
288-184
unit
unit
OM
S$
1+
810·00
S$
S$
DC600 KAR-GB (BS1363)
DC600KAR-XE (Aus/NZ)
471-061
541-205
Price per
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
1+
385·00
250·00
116·50
255·00
134·50
330·00
142·00
300-026
388-6380
14.4
18
300-032
388-6396
18
7.2 to 18
300-048
288-207
S$
S$
Stock no.
OM
S$
288-207
unit
1+
S$
S$
155·50
Charges all DEWALT 7.2V - 18V NiCd/NiMH/Li-Ion batteries so
users only need one charger for multiple cordless products
Charges the 2.0Ah battery pack in 40 mins minimising downtime
The DEWALT 3-stage charging system provides maximum
runtime and extends overall life of the battery
Diagnostics with LED indicator communicates battery charge
status: charged, charging, power line problem, replace pack, and
battery too hot or too cold
Price per
OM
unit
S$
S$
S$
1+ 250·00
S$
1+
1+
1200·00
1320·00
S$
S$
S$
S$
1+ 230·00
1+ 73·00
S$
Operates from mains or 12 to 18V DeWALT NiCd/NIMH
batteries
Charges two DEWALT 7.2V to 18V NiCd/NIMH batteries
2 power outlets offers more versatility for jobsite power
Compact , lightweight design provides quick and easy
fold-up, transport and storage
Spring-loaded battery hold-down keeps batteries in place
during transportation
Lamp Type: Fluorescent
Light output: 2700 Lumens
Height: 174mm
Battery Capacity
Battery Type
Stock no.
410-719
Charge Time
Plug Type
Price per
unit
1h
British 3 pin BS 1363
OM
S$
1+
580·00
S$
S$
Most cordless power tools in this range are supplied in a storage/carry case with a one hour battery
charger.
18V Heavy Duty Jigsaw Kit
400W
0-3000 Strokes/m
26mm stroke
10mm depth of cut in metal at 90°
Trigger controlled variable speed
Keyless blade change, accepts t-shank blades
Adjustable tool free shoe
3-position pendulum
Anti-vibration counter balance mechanism
Dustblower keeps line of cut clear
Rubber coated grip
Supplied with: 1 hr charger, 2 x 18V 2.6Ah NiMH
batteries, 1 x blade, carry case.
DC330KB-GB (BS1363)
DC330K-XE (Aus/NZ)
OM = Order Multiple a New product to range
7.2 - 18V
NiCd; NiMH
DeWalt Saws & Grinders
Description
1858
346-7276
388-6374
300-026
388-6380
300-032
388-6396
300-048
Price per
12
14.4
346-7276
388-6374
Work Light/ Charger
OM
OM
Stock no.
471-077
200 → 600 rpm
Stock no.
2.4 Ah
*
Stock no.
A 3 position locking pivot operated from left or right and a
gearbox diameter of only 40 mm for easy access to the tightest
of working spaces with maximum user control
Two speed control and 8 torque settings ideal for screwdriving
applications and pilot drilling
Pistol grip, soft grip handle and a rapid actuation switch for
superior ergonomics and maximum user control in any working
position
Quick release 6.35 mm magnetic collet for ease of use and
convenience
All metal gearbox, metal gearcase and robust xenoy tool
housing tough enough for the professional workplace
Optimised working range in lower power applications upto 6
Nm for when it is a priority not to damage the screwhead or
workpiece or where it is critical not to overtighten fixings
LED light operated by an independent switch for visiblity in tight working spaces
Supplied with: 1 hour charger, 2 x 1.2Ah NiCd batteries, screwdriver bit, heavy duty carrying case.
Description
DC9096-XE
DE9116-XE
Stock no.
Multi Chemistry Fast Charger
3.6V 3 Position Screwdriver
Speed
2.4 Ah
2.6 Ah
Universal Charger, Aus/NZ Plug
Stock no.
346-7232
288-184
Price per
DC9091-XE
DE9503-XJ
Description
Cross-reference to manufacturer’s part no.
Plug Type
2.4 Ah
2.4 Ah
Any DeWALT or Elu 24Volt Tool
DeWALT or Elu 12Volt Tool that Features Modern
Battery Design
DC945KC-XE
DeWALT or Elu 14.4Volt Tool that Features Modern
Battery Design
DC728KA-XE; DC935KC-XE
DeWALT or Elu 18Volt Tool that Features Modern
Battery Design
DC330K-XE, DC925KC-XE, DC500
DC9096-XE
Voltage
Rating (V)
24
12
Accessories
Speed 0-1000
Ideal for drilling anchors and fixing holes into concrete, brick
and masonry
Switchable hammer action
Compact design
Capacity: steel; 13mm, wood; 30mm, concrete; 22mm
Air cooled batteries to improve runtime
Supplied with: 1 hr charger & 2 x 2.0Ah Ni-Cd 24V batteries,
grease, heavy duty carry case
Description
UK BS1363 plug
Aus/NZ plug
DC9071-XE
DE9502-XJ
Suitable for Use With
24V NiCd battery
12V NiMH battery
12V NiCd battery
14.4V NiMH battery
14.4V NiCd battery
18V NiMH battery
18V 2.4Ah NiCd battery
24V SDS Hammer Drill
DeWALT part no.
DC222KA-GB
DC222KA-XE
Battery
Capacity
2.0 Ah
2.6 Ah
Description
Keyless
13 mm
50 mm
Price per
Manu. Part
No.
DE0243-XJ
DE9501-XJ
Stock no.
340-9129
288-178
Price per
unit
unit
OM
S$
1+
1+
1160·00
760·00
* manufacturers information unavailable at time of printing
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
18V 125mm Grinder
Panasonic Drills
Keyless guard
Trigger switch with lock-off button
Two position side handle
Low profile jam pot gear case improves gear durability
and ergonomics
Quick change wheel release
Steel cut spiral bevel gears
Maximum disc diameter of 125mm
M14 spindle thread
Supplied with: 1 hour charger, 2 x 2.6Ah NiMH batteries,
Keyless protective guard, 2 position side handle and heavy
duty carrying case.
Voltage
Speed
Weight
18 V
6500 rpm
3.2 kg
Stock no.
a678-3013
14.4V Lithium Ion Drill/Driver
Spindle Size
Power Output
Blade Size
Price per
unit
Part of Panasonic’s Lithium Ion range of cordless power tools
benefiting from longer runtime, extra power and reduced weight
when compare to conventional batteries.
High Capacity 3Ah Li-ion battery
Compact light weight design: 1.6kg
Variable speed control with reverse and brake trigger
18-stage clutch plus drill position
13mm heavy duty keyless chuck
High torque: 44.1 Nm
50min charge time
LED light for support when working
Supplied with: 2 x 3Ah Li-ion batteries, universal charger(NiCd,
NiMH, Li-Ion) and carry case.
M14
405 W
125 mm
OM
S$
1+
928·00
S$
S$
138-354
Price
per
OM
S$
506-9509
unit
1+
620·00
Speed
20 Nm
7.2 V
Stock no.
541-261
S$
1+
750·00
S$
S$
Stock no.
384-068
Price per
Price per
unit
OM
S$
1+
710·00
S$
S$
S$
S$
S$
S$
3.6V Lithium Ion Screwdriver
Battery Type
unit
75
0 → 2300 rpm
Mobile Pen Impact Driver
Compact impact screwdriver with 20Nm of fastening torque
ideal for hard to reach driver applications
Li-ion battery technology - no memory effect
Built in LED illuminates work
Enhanced hinge mechanism: 2 position - can be used as a
hand screwdriver
Lock button prevents accidental start-ups and locks spindle
for manual tightening
Impact mechanism - ensures easy operation with reduced
reaction
No load speed 2300rpm
1⁄4" hex drive
Power source: 7.2V 1.0Ah Li-ion battery
Supplied with: Supplied with 2 x battery pack, charger, holster,
5 piece bit set and soft case
TD020DSE (Aus/NZ)
OM
14.4V Lithium Ion Impact Driver
Stock no.
Description
Price per
unit
Part of Panasonic’s Lithium Ion range of cordless power tools benefiting
from longer runtime, extra power and reduced weight when compare to
conventional batteries.
Brush-less motor
3 speed (high/medium/low)
High Capacity 3Ah Li-ion battery
Compact light weight design: 1.45kg
High torque: 150 Nm
Variable speed control with reverse
50min charge time
LED light for support when working
Supplied with: 2 x 3Ah Li-ion batteries, universal charger(NiCd, NiMH,
Li-Ion) and carry case.
A cordless angle drill suitable for drilling and screw-driving in
confined spaces, powered by a 9.6V NiMH battery.
10 mm keyless chuck
Variable speed (0-800)
Reversible
Side handle
Supplied with: 1 hr Charger, 2 x 2.6Ah Ni-MH batteries, Carry
Case
Drilling Capacity
Voltage
60 → 1350 rpm
Speed
Stock no.
EY7440-LN2S (Aus/NZ)
Angle Drill - 9.6V NiMH
DA392DWDE
(BS1363)
13 mm
35 mm
Description
Makita Drills
Manu. Part No.
Chuck Capacity
Drilling Capacity
OM
S$
1+
270·00
Li-ion
S$
S$
Panasonic’s latest two speed in-line driver with Lithium-Ion batteries,
extra power, longer runtime but less weight than conventional
batteries. Easily converts from straight to pistol form and "Auto Shutoff Clutch" extends battery & clutch life by immediately stopping
rotation once selected torque setting is reached.
Powerful and lightweight 3.6V 1.5Ah Li-ion batteries
Reversible action
New ergonomic body design
Sturdy polyethylene carrying case with storage compartments
Universal charger suitable for use with previous model (EY6225)
Built-in LED joblight
Supplied with: 2 x Li-ion batteries, charger and polypropylene
storage/carry case
For BS1363 plug version 137-575 see RS website
Description
EY7410-LA2S (Aus/NZ)
Rechargeable Batteries
Stock no.
Price per
138-360
unit
Stock no.
Price per
OM
S$
1+
385·00
Accessories
Description
3.6V 1.5Ah Li-ion battery
Replacement Batteries for discontinued power tools.
Voltage
Battery Type
9.6 V
NiCd
Stock no.
535-792
Price per
unit
OM
S$
1+ 180·00
12V 2Ah battery only for Makita Keyless Drill driver
269-1579
Price per
unit
OM
S$
S$
S$
1+ 184·50
Battery Charger
Universal charger for Makita NiCd & NiMH power tool
batteries.
Voltage
458-1806
Price per
unit
OM
S$
1+
86·00
18 torque settings
2 speed gearbox
Variable speed (0-400 / 0-1300)
Reverse
Electric brake
13mm keyless chuck
12V NiMH battery x2
Electric brake
Capacity: wood; 27mm, steel; 13mm
Supplied with: 45min Charger, 2 x 3.5Ah NiMH Batteries, Storage/Carry Case
Volts Battery Type Charge Time
Chuck Size
Chuck
Speed (rpm)
(V)
(mins)
(mm)
Type
12
2 x 3.5Ah Ni- 45
13
Keyless 400 (Low, No Load); 1300 (High, No
MH
Load)
Description
7.2 - 14.4 V
Stock no.
unit
12V Drill Driver Set
S$
Spares for 12V 2Ah Keyless Drill/Driver
Stock no.
137-581
EY6409NQKW - UK model
EY6409NQKW - Aus/NZ
OM
S$
S$
Stock no.
361-9916
138-326
Price per
unit
unit
OM
S$
1+
1+
650·00
540·00
S$
S$
S$
1+ 185·50
My Account
www.rssingapore.com
Visit our website for additional price information and exciting promotions
1859
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
15.6V Combi Drill Kit
Note: Ni-Cd battery chargers will not charge NiMH batteries
Supplied with: 2 batteries and charger in a strong carrying
case
EY6931NQKW
2 x 3Ah NiMH batteries
Power output 25.5Nm
45 min charging time
Variable speed 80-2,000rpm
13mm keyless chuck
Powerful hammer action
2 speed reversible
Manu. Part No.
Stock no.
EY6932NQKW
462-9649
Price per
in. hexagon
0·3 to 2·94 Nm
L. 239 mm Dia. 40 mm
400 g
Description
Stock no. Price per
EY503B (Aus/NZ)
462-9611
Battery
Charge time
Charge input
unit
2·4 V nickel cadmium
1 hour
240 V 50 Hz
OM
S$
1+
305·00
S$
S$
S$
S$
S$
S$
Panasonic Batteries
A rechargeable battery pack for Panasonic cordless power
tools.
OM
S$
1+
810·00
unit
1⁄4
Drive
Torque range
Size
Weight
S$
S$
15.6V Drill/Driver
Description
2 x 3 Ah Ni-MH batteries
Weight - 2kg
Max Power - 31.9Nm
45 min charge time
Speed variable and reversable
18 stage clutch plus direct drive
13mm keyless chuck
Electric brake
Max drilling:- wood 36mm/steel 13mm
Note: Ni-Cd battery chargers will not charge Ni-MH batteries
Supplied with: 2 battery packs and charger in a strong
carrying case. Spare batteries are available separately
75
Description
Stock no.
EY6432-NQKW31 (UK)
361-9900
Price per
unit
12V NiMH battery
Stock no.
629-0603
Price per
unit
OM
S$
1+
790·00
OM
S$
1+
700·00
S$
1+
169·50
S$
S$
S$
Input Power 1000VA
2 Speed/Reversing/Variable 0-1000/0-3000rpm
Impact rate 0-16000/0-48000 per min
13mm Keyless chuck
Weight 2.5kg
Drilling capacity: Wood 40mm, Steel 16mm, Concrete
20mm, supplied in practical carrying case
Description
GSB20-2RCE (Aus/NZ)
Stock no.
484-1013
Price per
unit
OM
S$
1+
500·00
Two Speed Impact Drill
Two speed gearbox plus electronic speed control for precise
start-up speed and impact rate, perfectly matched for
optimum drilling performance in wood, brick, concrete,
masonry and steel.
Supplied with: side handle, depth stop and carrying case.
S$
Chuck type/capacity
Drilling diameter
13mm, keyless
Steel 13mm
Concrete 18mm
Wood 40mm
750 W
0 - 1000/0 - 3000rpm
0 - 16000/0 - 48000 bpm
2.2 kg
230Vac
13 mm
Drilling Capacity -Metal
Keyless
Drilling Capacity -Wood
20 mm
3.6V Screwdriver
2 speed, forward & reverse
15 min Charger
21 torque settings and direct drive
Can be used in straight or pistol grip position
¼ inch hex drive
Volts Battery Charge Time Chuck Size Chuck Type
(V)
Type
(mins)
(mm)
3.6
Li-Ion
15
6.5
Hex Quick
Connect
Battery Type
Li-Ion
unit
OM
1000VA Impact Drill
This drill is suitable for drilling, impact drilling, screwdriving
and assembly/disasembly in industrial applications.
Max torque drilling/screwdriving 22.6Nm,in impact
127.5Nm. Speed 0-650 and 0-2200rpm. Imapct rate 03300ipm.
Torque settings 1.0 to 5.4Nm, 18 stages of 26NM per
stage
Charging time 45 minutes from flat
Max hole in wood 27mm, steel 13mm
Available with either BS1363 type or Aus/Nz mains plug
fitted
Contents
Comes with 2 x 15.6 volt Ni-MH 3.0Ah batteries giving 50%
more work between charges. No memory effect 7.2-15.6 volt battery charger, Panasonic 13mm keyless
chuck, Panasonic 1/4 inch hex drive chuck. Keyless chuck is not to be used on impact. 13mm square
drive for use with impact sockets. Supplied in a strong storage/carry case.
EY6535GQKW (Aus/NZ)
251-1681
Price per
Bosch Drills
Multi Function Drill 15.6 Volt
Panasonicᓽ
Description
Stock no.
Power input
Speed rotation
Impact rate
Weight
Voltage
Chuck Capacity
Chuck Type
Drilling Capacity -Masonry
Speed
(rpm)
200; 600
Description
GSB18-2RE (Aus/NZ)
Stock no.
462-9661
Price per
unit
OM
S$
1+
380·00
13 mm
40 mm
S$
S$
S$
S$
Variable Speed Impact Drill
Description
Stock no.
EY7410- LA2S (UK)
137-575
Price per
OM
S$
1+
340·00
unit
S$
S$
Impact drill with variable reversing action for drilling/
screwdriving.
Cordless Screwdriver 2-Cell
A cordless screwdriver for effortless, repetitive screwdriving.
Knuckle joint allows straight or angled use. Supplied
complete with battery charger.
Forward and reverse motor drive
2 speed operation 200 rpm and 400 r.p.m.
Adjustable torque control in 6 steps from 0·3 to 2·94 Nm
Lockable drive with motor off allows removal of very
tight screws by use as a conventional screwdriver*
1 hour battery charge
BS1363 version (663-516) includes three screwdriver bits:
two crosspoint and one flat blade
Note: *Maximum allowable torque 15Nm
screwdriver performance
With a fully charged battery approximate performance is as follows :
either:
450 M5 machine screws
or:
300 M6 machine screws
or:
120 Ø3mm x 17mm length woodscrews into
softwood
1860
OM = Order Multiple
Max. drill size
Steel 10mm
Concrete 16mm
Wood 25mm
550VA
0-1600 rpm
0 - 25600 bpm
1.7kg
230Vac
Input power
Speed, variable
Impact rate, variable
Weight
Voltage
Description
GSB16RE (Aus/NZ)
Stock no.
462-9677
Price per
unit
OM
S$
1+
315·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Compact Impact Drill (GSB 16 RE)
Plug Type
1 speed impact drill
Auto-Lock for simple and fast tool changes
Soft grip for low-vibration work
Slim and secure grip for fatigue-free and safe work
Control Electronic - exact pilot drilling, speed / impact rate
perfectly geared for optimum drilling rate
Speed preselection with setting wheel
Forward/reverse operation
Spindle collar diameter of 43 mm (European standard)
Supplied with: Slide handle, depth stop and carry case
British 3 pin BS 1363
Input Power
Chuck Type
Chuck Capacity
Maximum Torque (Nm)
Drilling Capacity -Masonry
Drilling Capacity -Metal
701 W
Keyless
1.5-13 mm
13.5 Nm
18 mm
13 mm
Plug Type
Stock no.
British 3 pin BS 1363
497-4315
Price per
Description
OM
S$
Power Input
Speed
Disc Size
30 mm
41600bpm
2600 rpm
1.9 kg
240 V
S$
S$
1+ 195·00
GSB13RE, BS1363
GSB13RE, Aus/NZ
Price per
534-8925
541-188
S$
25 mm
15 mm
10 mm
1.6 kg
S$
S$
1100W motor
Drilling with core cutters – upto 82mm in masonry
Screwdriving and drilling with holesaws upto 90mm in
wood
High torque 40/14.5Nm
High durability due to metal gear housing and stacked
construction
Rotatable brush plate for equal power when in reverse
Variable speed trigger with adjustable dial
Single-sleeve metal chuck with a higher clamping tension
due to carbon tipped jaws
Ball grommet
Overload clutch
Softgrip
Supplied with: Auxilliary handle with push-button depth stop.
Plug Type
Stock no.
British 3 pin BS 1363
695-7129
1+
Power (W)
Speed (rpm)
Chuck Type/
Capacity
900
0-760
SDS Plus
Plug Type
British 3 pin BS 1363
560-921
Price per
unit
S$
S$
S$
440·00
OM
unit
unit
S$
S$
S$
S$
S$
S$
S$
S$
S$
1+ 225·00
1+ 230·00
OM
S$
1+
1030·00
Drilling Capacity -Metal
Core Drilling
Impact Rate
Weight
Stock no.
484-1041
13 mm
68 mm
0 - 4400
2.3 kg
Price per
OM
unit
S$
1+ 143·00
75
Jigsaw GST 75BE
S$
240
720
500 - 3000
Pendulum
135/10
26
2.7
Stock no.
137-755
137-733
110
720
500 - 3000
Pendulum
135/10
26
2.7
Price per
unit
unit
OM
S$
1+
1+
320·00
305·00
Delta Sander
Variable speed - 9000 to 19000/min
Plate size - 94mm corner to corner
Weight - 1.1kg
Supplied with various sanding discs and 3 sanding pads
in a handy carrying case
Double insulated
UK BS1363 Model
Aus/NZ Model
Drilling and hammer-drilling modes
Torque limiting clutch
Storage/Carry Case
Extended warranty available online from Bosch
620 W
0-1000 rpm
SDS Plus
22 mm
Price per
Australian/New Zealand 3 pin
Australian/New Zealand 3 pin
Description
SDS - plus Hammer Drill - 620W
Input Power
Speed
Chuck Type
Drilling Capacity -Masonry
444-2133
444-2155
14
1.45
Bosch Sanders and Planers
Capacity Wood/
30/13/30
Steel/Masonry (mm)
Core Drilling (mm) 90
Impact Rate (ipm) 0-3600
Weight (kg)
4.7
Stock no.
Stock no.
Plug Type
240V Jigsaw BS1363
110V Jigsaw (BS1363)
15300 / 51000bpm
40 Nm
900 / 3000rpm
2.9 kg
240 V
Drilling, hammer-drilling and chiselling modes
Torque limiting clutch
Keyless chuck adaptor
42 accessories for wood, steel and concrete work
Storage/Carry
Extended warranty available online from Bosch
240
Plug Type
Description
SDS Hammer Drill Kit (750W - 900W)
Voltage
Description
Voltage (V)
Power (W)
Speed (s/min)
Action
Depth of cut: Wood/Steel (mm)
Stroke (mm)
Weight (kg)
Impact Rate
Maximum Torque (Nm)
Speed
Weight
Voltage Rating (V)
Price per OM
unit
Spindle Size
Weight
Precision control, the adjustment of the jigsaw blade is
made by the push of a button
Low vibration
Comfort
Tool free adjustment
0-45° angular cuts
4 pendulum action stages
Extended warranty available online from Bosch
1+ 210·00
1+ 168·00
13 mm
Single Sleeve
24 mm
16 mm
40 mm
350·00
S$
100mm disc Mini Angle Grinder
Quick adjust protective guard
110V, 230V or 240V (670W input power)
11,000 rpm (no load speed)
Side handle can be left or right hand mounted
M10 spindle
Weight 1.4kg
Impact Drill (1100W)
Chuck Capacity
Chuck Type
Drilling Capacity -Masonry
Drilling Capacity -Metal
Drilling Capacity -Wood
1+
S$
Mini Grinder GWS 6-100
OM
unit
unit
750 W
11000
115 mm
230V Mini Grinder (BS1363)
115V Mini Grinder (BS1363)
Drilling Capacity -Wood
Drilling Capacity -Masonry
Drilling Capacity -Metal
Weight
Stock no.
unit
S$
115mm Low Vibration Mini Angle
Grinder
Compact and powerful impact drill which can be used in
tight spaces where larger drills are difficult to use
Rotatable brush plate
Variable speed, with reversible mode for screwdriving
Adjustable speed dial
Trigger-lock for continuous working
Softgrip handle
Extended warranty available online from Bosch
Supplied with: Side handle and depth stop
230 V
600 W
0-2800 rpm
Keyless
13 mm
472-9301
OM
All the grinders have a spindle lock and lock nut blade change system
600W Compact Impact Drill
Voltage
Input Power
Speed
Chuck Type
Chuck Capacity
Price per
Bosch Grinders, Saws & Routers
Drilling Capacity -Wood
Impact Rate
Speed
Weight
Voltage Rating (V)
unit
Stock no.
S$
Stock no.
362-0534
484-1079
Price per
unit
unit
OM
S$
1+
1+
280·00
410·00
RotoZip
RotoZipᓼ RZ5 Spiral Saw System
The RotoZip Spiral Saw
system offers maximum
cutting efficiency to save
time, effort and money
by allowing the user to
cut any possible
direction or shape.
Whether cutting straight
lines, perfect circles or
free-hand the RotoZip
allows fast, easy and effective cutting in a range of materials.
3 jaw chuck (3.2-6.4mm) for quick bit change without collet
Quick release means easy adjustment of cutting depth
Detachable handle with integrated bit and wrench storage
New products available online every week
1861
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Die Grinder
Soft grip body
Dust sealed switch
No load speed: 30,000 rpm
Weight:1.5kg
Supplied with: Jig Saw handle attachment, vacuum attachment, 5 x multipurpose XBITᓽ (XB-MP5) 1
x wall tile XBITᓽ (XB-TC1), 1 x diamond tile XBITᓽ (XB-FT1), and RotoZip tool bag.
High speed die grinder supplied with instructions and 2
spanners for tool changing
Power Input
Collet Size
Max. Wheel/Cutter Diameter
520 VA Weight 1.75 kg
6 mm Speed 25000 rpm
26 mm Voltage 240 V
Accessories
Description
Stock no.
Circle Cutter (∅ 90 - 300mm)
Straight Edge Guide
494-284
494-294
Price per
unit
unit
OM
S$
1+
1+
32·10
32·10
S$
S$
Description
75
ZIP Bit Sabrecut SC5
ZIP Bit Drywall GP5
XBIT Tile Cutter XB-TC1
XBIT Floor Tile XBFT1
XBIT Metal XB-MC1
Diameter (mm)
3.2
3.2
4
4
4
Application
Multipurpose
Drywall
Tiles
Floor Tiles
Metal (1.2 mm)
Stock no.
Price per
OM
S$
494-323
494-329
494-272
494-290
494-288
box of 5
box of 5
unit
unit
unit
1+
1+
1+
1+
1+
22·60
19·20
29·50
56·50
37·80
S$
Stock no.
494-323
494-329
494-272
494-290
494-288
S$
Stock no.
Keyless 13mm
13/40
2.1
457-8333
543-229
Price per
unit
unit
OM
S$
1+
1+
430·00
395·00
S$
S$
S$
S$
S$
1+
485·00
unit
230 V
5000 rpm
Cutting Depth
Weight
Plug Type
Stock no.
541-194
S$
S$
S$
S$
86 mm
7.1 kg
Price per
unit
OM
S$
1+
450·00
Drilling Capacity -Wood
Drilling Capacity -Metal
Weight
No load speed 10000rpm
Spindle Lock
Supplied with: Side handle, protective guard, inner and
outer disc flanges, spanner.
9 mm
6.5 mm
0.9 kg
Power Input
Disc Size
311-3301
543-239
Price per
unit
unit
OM
S$
S$
S$
1+ 163·00
1+ 196·00
Stock no.
488-5782
488-5798
541-198
Price per
unit
unit
unit
OM
S$
1+
1+
1+
435·00
410·00
395·00
1400 W
125 mm
Spindle Thread
Weight
M14
3.1 kg
Description
Manu. Part
No.
Stock no. Price
per
240V, UK PLug
240V, AUS Plug
DW831R-GB
DW830-XE
297-6224
288-257
unit
unit
OM
S$
1+
1+
400·00
335·00
125mm Angle Grinder with dead man
switch
Rear handle design with ’dead man’ switch
Non-slip anti-vibrational handle
Tool-free guard fitment, adjustment or removal
Pop-off brushes protect the armature from damage
Low profile gear case
Fitted with Aus/NZ plug
2 speed gearbox
Variable Speed
Reversible
Length 350mm
Supplied with: Side handle, depth stop and carrying case.
Voltage (V)
230
110
Power (W)
750
730
Speed (rpm)
0-2600
0-2600
Chuck Type/Capacity
13mm Keyless 13mm Keyless
Impact Rate (bpm)
0-36000
0-36000
Capacity: Concrete/Steel/Wood (mm) 20/13/40
20/13/40
Weight (kg)
2.65
2.65
Disc Size
Power Input
Arbor Size
Voltage
Plug Type
Australian/New Zealand 3 pin
S$
S$
Hitachi Grinders, Saws & Routers
All angle grinders in this range have integral spindle locks for disk changing, and are supplied with
lock-nut wrenches. They are also fitted with reversible (LH-RH) side handles. All tools are double
insulated
1862
OM
125mm Angle Grinder
Impact Drill
115V Impact Drill
230V Impact Drill, UK model
230V Impact Drill, Aus/NZ
560·00
430·00
390·00
S$
DeWalt Grinders, Saws & Routers
Stock no.
Description
Price per
451-5348
Australian/New Zealand 3 pin
Drill (240W)
240V Compact Drill, BS1363
240V Compact Drill, Aus/NZ
1+
1+
1+
unit
unit
unit
S$
High power to weight ratio
Heavy duty aluminium base
Soft grip handle and all new design
Blower ensures cut line is always visible
Adjustable metal cut line guide
External brush caps for ease of maintenance
Unique angle setting system ensures accuracy of 90
degree cuts
Spindle lock for easy blade replacement
Supplied with: 20 tooth TCT blade, dust extraction adapter,
guide, wrench, carrying case
Voltage
Speed
Description
S$
Circular Saw
Voltage (V) 230 Chuck Type/Capacity
Power (W) 710 Capacity: Steel/Wood (mm)
Speed (rpm) 0-850 Weight (kg)
240 W
4500
Keyed
6.5 mm
Stock no.
BS1363
Supplied with: Side Handle & Storage/Carry Case
Input Power
Speed
Chuck Type
Chuck Capacity
OM
Supplied with: 3 assorted blades
T-type blade shank
25mm minimum cutting radius
Reciprocating Action
Voltage (V)
230
110
Power (W)
740
740
Speed (rpm)
850-3000
850-3000
Cut Depth: Wood/Steel
120/10
120/10
(mm)
Cutting Radius:
25mm
25mm
(minimum)
(minimum)
Weight (kg)
2.3
2.3
Voltage
230 V
Stroke 26 mm
Speed
850 → 3000 rpm
Weight2.3 kg
Cutting Depth 120mm Wood; 10mm Mild Steel Plate mm
Description
Drill (710W)
230V Drill, BS1363 plug
230V Drill, Aus/NZ plug
685-409
543-011
685-415
Price per
Jigsaw
Hitachi Drills
Description
Stock no.
British 3 pin BS 1363
Australian/New Zealand 3 pin
British 3 pin BS 1363
RotoZip Spiral Saw Bits
Bits for use with the Bosch RotoZip.
Description
ZIP Bit Sabrecut SC5
ZIP Bit Drywall GP5
XBIT Tile Cutter XB-TC1
XBIT Floor Tile XBFT1
XBIT Metal XB-MC1
Plug Type
OM = Order Multiple a New product to range
125 mm
1250 W
M14
240 V ac
Stock no.
410-725
Free Speed
Length
Model
Price per
unit
9000 rpm
385 mm
D28065-XE
OM
S$
1+
380·00
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Jigsaw
Reciprocating Saw
On/Off trigger
Pre-settable electronic speed control
Pendulum (3 setting), and normal cutting action
Left and right cutting action
Supplied with: Anti-scratch shoe cover, Dust extractor
adaptor, 1 Blade & Storage/Carry Case
Trigger controlled variable speed
Adjustable shoe maximising blade life
Spare blades available separately
Supplied with: 3 Blades & Storage/Carrying Case
Power Input
Action
Depth Of Cut - Wood
Depth Of Cut -Steel
550 W
Linear/Pendulum
85 mm
10 mm
Plug Type
Stroke
Bevel Plate Angle
Weight
Speed
Stock no.
British 3 pin BS 1363
20 mm
0-45 °
2.0 kg
0-3100spm
Price per
297-6195
Power Input
Speed
Action
unit
540 W
0 to 2800spm
Linear
Depth Of Cut - Wood
Stroke
Weight
Description
OM
S$
1+
455·00
S$
S$
Stock no.
230V Recip saw, BS1363
230V Recip saw, Aus/NZ
90 mm
30 mm
2.9 kg
Price per
535-679
543-027
OM
S$
1+
1+
470·00
590·00
unit
unit
S$
S$
S$
S$
Electric Planer
Makita Drills
Length: 290mm Weight: 2.5kg
A 580W centre line balanced electric planer with double
edged tungsten carbide blades. Supplied with socket
wrench, edge fence and blades the planer is fitted with a
standard Australian/New Zealand mains plug.
Power Drills 10mm Variable
Length: 261mm Weight 1.4kgs
A 530W reversible drill with a keyless chuck and trigger speed
control between 0-2500rpm. The drill is fitted with an
Australian/New Zealand mains plug.
Description
Stock no.
82MM 580W Planer
269-1888
Price per
OM
S$
1+
365·00
unit
160W Finishing Sander
Manu. Part No.
Stock no.
6408
269-4528
Price per
OM
S$
1+
270·00
unit
S$
S$
A 160W palm grip styled sander operating at 14000rpm
using a sandpaper size of 114mm×140mm. The sander is
fitted with an Australian/New Zealand mains plug.
75
Drill (510W)
Keyless chuck
Variable Speed
Input Power
Chuck Capacity
Drilling Capacity -Wood
510 W Drilling Capacity -Metal
13 mm Weight
36 mm
13 mm
2 kg
Length: 120mm
Weight: 0·95kg
Manu. Part No.
Stock no.
BO4553
Price per
269-1901
OM
unit
S$
S$
S$
1+ 205·00
125mm Angle Grinder
Plug Type
Stock no.
British 3 pin BS 1363
Price per
535-578
unit
OM
S$
1+
500·00
S$
S$
13mm Percussion Drill
13mm Keyless Chuck Percussion Drill
2-speed gearbox, forward/reverse and variable speed
16mm drilling capacity in masonry, 13mm in steel
650W motor
Complete with carry case
Available with either BS1363 type or Aus/Nz mains plug
fitted
Heavy duty rear handle angle
grinder
Soft start
Current limiter
LED power light
Double insulated
Supplied with: Protective wheel guard, side handle &
spindle lock.
Voltage
Power Input
240 V
1050 W
Manu. Part No.
Stock no.
Price per
a667-4054
GA5021
Free Speed
Weight
unit
11000 rpm
2.5 kg
OM
S$
1+
372·00
S$
S$
Magnetic Drilling & Cutting System
Electro-Magnetic Drilling System
Plug Type
Stock no.
British 3 pin BS 1363
Australian/New Zealand 3 pin
506-9543
629-0748
Price per
unit
unit
OM
S$
1+
1+
199·50
225·00
S$
S$
Supplied with: Safety Strap, Safety Guard, Cutting Fluid, 1⁄2" Chuck, Set of
Hex Keys and Robust Plastic Carry Case
Makita Saws, Sanders, Grinders & Planers
Jigsaw
Makita 4340
Built in shock-proof high output LED illuminates cutting
edge
’Tool Less’ push in lock system for fast blade installation
and removal
Electronic speed control dial and soft start feature
4-position pendulum action
Accepts tang shank blades
Available with either BS1363 type or Aus/Nz mains plug
fitted
Plug Type
458-1799
629-0653
Price per
unit
unit
110 V
550 rpm
13 mm
32 mm
1000 kg
10.5 kg
Stock no.
BS 4343
506-7424
Price per
OM
S$
1+
1100·00
unit
S$
S$
S$
S$
HSS Annular Cutter Kit
5-piece with MT2 annular cutter set suitable for use with
Magnetic base drill 506-7424
25mm
135mm
9.5mm
800-2800
Stock no.
British 3 pin BS 1363
AUS, NZL
Voltage
Speed
Drilling Capacity
Milling Capacity
Magnetic Adhesion
Weight
Plug Type
Supplied with: 2 ac. Blade Set (B10, B13, B22), Anti Splintering Device, Cover Plate, Plastic Case.
Stroke Length
Max cut capacity wood @ 90°
Max cut capacity steel @ 90°
No Load Speed (RPM)
Size: H310 x W115 x D225mm
Travel: 155mm
Power input
Length
Weight
OM
S$
1+
1+
485·00
590·00
720VA
235mm
2.4kg
S$
S$
Contents
Dia mm
14
16
18
20
22
Pilot Pin
Length mm
25
25
25
25
25
Stock no.
506-7430
Price per
1 set
OM
S$
1+ 195·50
Many more leading brands from over 2,500 suppliers available online
1863
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Heat Guns - Heavy Duty
Heat Guns
Continuously adjustable temperature and airflow
Electronically monitored temperature range and airflow
Temperature display with actual and set temperature
Supplied with one reduction, surface and reflector nozzle
Replacement nozzles available separately
Standard Heat Gun
Ideal for lighter duty intricate work
Hot, off, cold selector switch
Max Temp 360°C
510 cu.ft/hr
Supplied with: 13dia x 10mm wide reflector, 13dia x 83mm
wide reflector, precision reflector & reducing baffle
Voltage Plug Type
(V)
230
110
Stock no.
British 3 pin BS 1363
British 3 pin BS 1363
545-137
546-994
Price
per
OM
unit
unit
1+
1+
Maximum Temperature
650 °C
Wattage
Airflow
150 → 500 l/min
Weight
Plug Type
Voltage (V)
British 3 pin BS 1363
230
Australian/New Zealand 3 pin
230
British 3 pin BS 1363
110
S$
S$
S$
Description
Stock no.
240V Hot Air Gun, BS1363
240V Hot Air Gun, Aus/NZ
110V Hot Air Gun
490·00
375·00
Price per
520-2914
543-033
520-2920
unit
unit
unit
2300 W
940 g
Stock no.
520-2914
543-033
520-2920
OM
S$
1+
1+
1+
330·00
225·00
340·00
S$
S$
S$
S$
Accessories
RS 3 Stage Digital Heat Gun
Description
3 Stage Digital Heat Gun, provides variable temperature setting with
choice of airflow
Digital display indicates set and actual temperatures
Power switch provides selection of 3 heat/airflow positions
Heat output variable between 50 and 600 degrees C
Airflow selection 300 or 550 litres/min.
Supplied with 4 nozzles (flat, narrow, curved, standard) and
triangular scraper
Stock no.
Digital Heat Gun, 110V UK plug
Digital Heat Gun, 230V UK plug
137-193
137-165
Price per
unit
unit
OM
S$
Price per
684-614
684-636
684-620
OM
S$
1+
1+
1+
29·50
14·90
24·60
unit
unit
unit
Variable Temperature
75
Description
Stock no.
9mm Welding Nozzle
Reflector Nozzle
100g ABS Welding Rods
S$
S$
1+ 164·00
1+ 193·00
RS 3 Stage Heat Gun
3 Stage Heat Gun, provides variable temperature setting with
choice of airflow
Power switch provides selection of 3 heat/airflow positions
Rotating bezel adjusts heat output
Heat output variable between 60 and 600°C
Airflow selection 300 or 550 litres/min.
Supplied with 4 nozzles
A continuously adjustable, electronically and optically
monitored Schuko hot air gun. This high quality professional
hot air gun features a built-in temperature sensor which
regulates and monitors the set temperature, LEDs to indicate
temperature range selected and an adjustable air-flow regulator
for precision working. It also has a selectable cool air stage
which can be used for drying etc. Supplied complete with 1
reflector nozzle, 1 fishtail nozzle, 1x9mm reduction nozzle and
instruction leaflet.
Continuously variable temperature
Digital display of temperature in 10°C increments
4 factory set temperature settings
50°C Stage for drying, cleaning etc
Power Supply
230/240V ac
Output
240V ac
2,000W
Temperature
Stage 1
50°C
Stage 2
50 to 650°C
Air Flow
Minimum
200l/min.
Maximum
500l/min.
Weight
885g
type
Stock no.
230V ac (Schuko plug)
522-2198
Price per
unit
OM
S$
1+
450·00
S$
S$
Heat Guns
Description
Stock no.
Heat Gun, 110V, EN 60309-3 plug
Heat Gun, 230V UK plug
137-216
137-200
Price per
unit
unit
OM
S$
S$
S$
1+ 110·00
1+ 110·00
LED temperature display shows actual and set
temperature
Intelligent motor and temperature monitoring
Stepless temperature and airflow adjustment
Temperature range: 25-600°C
Brushless motor for long operating life
Easy heating element replacement
3-Stage Hot Air Guns
Multi-purpose heatgun with three heating and airflow stages.
Temperature setting via a 3-stage switch
Long life ceramic heating element
Double overheating protection: thermostat and thermal fuse
Ergonomic soft grip handle
Note: Stock Nos. 684-614 & 684-636 are not suitable for use with
520-2936 or 520-2942
Supplied with: 1 reflector nozzle and 1 fishtail nozzle.
Airflow (l/ Power Weight
Stock No
Voltage Temp
m)
(W)
(g)
(°C)
520-2942
110V
50, 150, 200, 300, 1300
780
50Hz
550
500
520-2936
230V
50, 400, 200, 300, 1800
780
50Hz
600
500
543-037
230V
50, 400, 200, 300, 1800
780
50Hz
600
500
Plug Type
British 3 pin BS 1363
British 3 pin BS 1363
Australian/New Zealand 3 pin
Plug Type
Description
230V 1750W UK plug
230V 1750W Aus/NZ plug
230V 3400W UK plug
230V 3400W Aus/NZ plug
520-2942
520-2936
543-037
Price per
unit
unit
unit
OM
Description
S$
Stock no.
520-2942
520-2936
543-037
S$
S$
S$
S$
1+ 181·50
1+ 181·50
1+ 105·00
Accessories
Description
Stock no.
9mm Welding Nozzle
Reflector Nozzle
100g ABS Welding Rods
684-614
684-636
684-620
Price per
unit
unit
unit
OM
S$
1+
1+
1+
29·50
14·90
24·60
Flat Nozzle 1750W
10mm Nozzle 1750W
Stock no.
325-3178
543-043
325-3190
543-049
Weight (g)
1115
1115
1190
1190
Voltage (V)
230
230
230
230
OM
S$
S$
S$
unit
unit
unit
unit
1+
1+
1+
1+
930·00
780·00
1320·00
810·00
Price per
OM
S$
S$
S$
1+
1+
47·20
76·00
S$
S$
Price per
Stock no.
325-3178
543-043
325-3190
543-049
325-3263
325-3279
unit
unit
Continuously adjustable temperature and airflow
Electronically and optically monitored
Long life ceramic heating element
Note: The Nozzles for use with these guns can also be used with
the discontinued Bosch Hot Air Guns , stock nos. 347-7021 & 3477071.
Supplied with: 1 reflector nozzle and 1 fishtail nozzle.
Temperature Range
Airflow
240V Heat Gun, UK Plug
OM = Order Multiple a New product to range
Stock no.
Electronic Hot Air Guns
Description
1864
Wattage (W) Airflow (l/min)
1750
600
1750
600
3400
800
3400
800
Accessories
Voltage (V)
110
230 → 240
230 to 240
Stock no.
British 3 pin BS 1363
British 3 pin BS 1363
Australian/New Zealand 3 pin
Description
230V 1750W UK plug
230V 1750W Aus/NZ plug
230V 3400W UK plug
230V 3400W Aus/NZ plug
50 - 660 °C
250 → 500 l/min ft3/h
Stock no.
472-9323
Power 2300 W
Weight 1000 g
Price per
unit
OM
S$
1+
430·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Heavy Duty Hot Air Gun
Plug Type
Durable hot air gun for professional
continuous operation
2000 Watt power with optimised
cooling
Compact and lightweight
Stable stationary positions and rubber insert
Variable temperature control and regulation
Supplied with: Glass protection, spoon reflector, cone,
fish tail & surface nozzles. Steel paint scraper for all
applications.
Australian/New Zealand 3 pin
Wattage
Voltage
Maximum Temperature
Stock no.
a706-8595
2000 W
240 V
600 °C
Airflow
Weight
OM
unit
S$
S$
S$
1+ 146·00
A range of mains powered Dremel mini power tool kits and accessories.
Stock no.
534-8931
629-0631
Price per
unit
unit
OM
Australian/New Zealand 3 pin
629-0647
Price per
unit
S$
S$
OM
S$
1+
250·00
Dremel 800 kit (BS1363)
F0138000JE Aus/NZ Plug
386-9739
S$
1+ 170·50
1+ 179·00
506-3466
546-2942
unit
unit
S$
S$
S$
Price per
OM
S$
1+
27·30
unit
S$
S$
S$
S$
S$
S$
To suit Dremel mulit tools (corded)
0.8 to 3.2mm capacity
Keyless
Max Speed 33000 rpm
Stock no.
Price
per
OM
S$
386-9543
unit
1+
30·10
S$
S$
Flexible Drive Shaft
S$
S$
Ideal attachment for precise, detailed work or hard-toreach places
127mm (5 inch) bend radius and comfort grip handpiece
allows great flexibility and fingertip control
Integrated shaft lock for quick and easy accessory
changes
Suits Dremel 534-8931 and 534-8947 tools, and quickconnect facility attaches in seconds
Length 1070mm
Stock no.
OM
265·00
Dremel Multichuck
Battery features include no memory loss, very little self discharge
and ability to re-charge at all times
Cordless freedom
10.8V lithium-Ion battery
Variable speed 5000-35000 rpm
60 Accessories covering, cutting, sanding, cleaning, polishing,
grinding, sharpening and drilling
Price per
S$
1+
75
Cordless Dremel
Stock no.
OM
unit
Collet kit to suit Dremel tools
Contains 3.2, 2.4, 1.6, 0.8 mm dia collets
Collet nut
Variable speed: 5,000 - 33,000 rpm (in 1000 rpm increments)
Digital LCD display shows exact speed
Electronic feedback control enhances low and mid-speed torque and
performance
Separate on/off and speed setting controls
Powerful 140W motor for maximum performance
Soft-start improves working life of motor
Pistol-grip design allows maximum control and excellent grip
Integrated hanging hook and on-board wrench storage
Stock no.
S$
Dremel Collet set
Dremel 400 Multi-tool
Plug Type
S$
1+ 177·00
Price per
707-3487
Stock no.
Description
unit
S$
230 V
5000 → 35000 rpm
British 3 pin BS 1363
Variable speed: 10,000 - 33,000 rpm
125W motor for optimal performance
Integrated hanging hook and on-board wrench storage
Soft grip body for reduced vibration and a better grip
Comfort switches for better handling and control
Second attachment interface to attach DREMELiteᓽ and
other (future) attachments
Available with either BS1363 type or Aus/Nz mains plug
fitted
Stock no.
OM
High performance 4000 multitool supplied in a carrying case.
Includes two new attachments: the Detailer’s Grip & the Shaping
Platform allowing you to sand or grind perfectly at 90° and 45°.
Contents:
Dremel 4000
Pencil grip nose cap
High quality flex shaft
Line & circle cutter
Shaping platform
Detailers grip
65 accessories in mini cccessory case (including SpeedClic
starter set)
Inspiring welcome poster
Instruction manual
Sturdy and spacious storage space
Plug Type
Dremel 300 Multi-tool
Dremel 300 BS1363
Aus/Nz
389-621
Operating Voltage
Speed
Dremel
Description
Price per
Dremel 4000 Rotary Tool (65
Accessories)
650 l/min
0.85 kg
Price per
Stock no.
545-9716
Price per
OM
S$
1+
63·00
unit
Workstation Drill Stand
S$
S$
1+ 255·00
1+ 200·00
Vertical and horizontal tool holding capability
Integrated telescoping tool stand holds tools with flexible shaft
On-board accessory storage
Depth markings for consistent depth adjustment, and base markings
(imperial and metric)
Base table size 155 x 155mm
Throat depth 70mm
Stock no.
545-9700
Price per
OM
S$
1+
99·00
unit
S$
S$
Accessories
Description
Lithium Ion Battery
Stock no.
482-4513
Price per
unit
OM
S$
1+
78·00
Cordless Dremel Stylus
The unique size and design of the Dremel Stylus Li-ion makes this tool
very convenient and easy to use resulting in maximum precision and
control
Li-Ion battery technology: no memory effect, no self discharge
Ergonomic design means maximum comfort and control
Variable speed 5,000 - 25,000rpm
Separate on/off switch allows speed setting to be kept
Soft grip for reduced vibration
Unique charger base also holds accessories
Weight: 350g
Battery: 7.2V 10Ah Li-ion, charge time 3 hours
Supplied with: Stylus cordless power tool, charger base, 25 Dremel
accessory bits
S$
S$
RS Mini-Tools
High Speed Drill
A high speed mini drill for increased versatility. This drill
incorporates a high efficiency fan-cooled motor for
improved torque and longer usage, and a pencil grip for
comfortable handling.
Supplied with: keyless chuck.
Operating Voltage
Cable Length
Plug Type
British 3 pin BS 1363
12 V dc Chuck Capacity
1.8 m Speed
Stock no.
472-2798
0.4 to 3.2 mm
16000 rpm
Price per
unit
OM
S$
1+
82·50
Visit our website for additional price information and exciting promotions
1865
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Precision PCB Drill
9.6V Cordless Rotary Tool Kit
A high quality, precision PCB drill with independent shaft
bearings for low shaft eccentricity and hence low vibration
and noise. For a suitable 12V power supply see stock no 4723123.
Lock button for easy bit changing
Metal body and 1m power lead
9-18Vdc
16000 rpm
Supplied with: 5 steel collets.
Variable speed 9.6V Cordless Rotary Tool Kit with 100
accessories.
10000 - 25000rpm
Up to 60 minutes use between charges
LED spot light feature
4 collet chucks (1mm, 2.35mm, 3mm and 3.2mm)
100 various accessories for sanding, drilling, engraving,
polishing, cleaning, cutting and grinding
Spare 9.6V battery ordered separately
Attractive aluminium carry and storage case
Plug Type
Stock no.
546-1494
Price per
OM
unit
S$
S$
S$
1+ 124·50
Compact PCB Drill
Plug Type
A low vibration, high torque high speed PCB drill with an
ergonomic shape to fit comfortably in the hand.
British 3 pin BS 1363
Stock no.
Price per
613-1223
unit
OM
S$
1+
99·00
S$
12 Volt Rotary Tool Kit
Supplied with: 850mm power lead, 3 jaw precision chuck.
Operating Voltage
Cable Length
6 → 18 V Chuck Capacity
0.85 m
Speed
Plug Type
Stock no.
British 3 pin BS 1363
547-616
0.6 - 3 mm
14500 rpm
Price per
unit
Ideal for precision work including polishing, grinding, modelmaking, engraving, finishing and cleaning etc.
Supplied with: 60 assorted accessories for polishing, grinding,
model-making, engraving etc
OM
S$
1+
36·50
S$
S$
Mini-Tool Power Stands & Vice
75
Drill Vice
Includes horizontal and vertical ’V’ grooves for tasks
involving shafts and tubes
Width 75mm
Jaw opening 48mm
Jaw depth 18mm
Voltage 12 - 18 V dc
Speed 8000-18000 rpm
Chuck Capacity
1 - 3.2 mm (Collet)
Plug Type
Stock no.
Price
per
OM
S$
British 3 pin
BS 1363
469-4356
unit
1+
90·00
S$
230 Volt Rotary Tool Kit
Supplied with: 100 accessories for cutting, grinding,
polishing, sanding etc, Aluminium Storage/Carry Case
Stock no.
472-2906
Price per
unit
OM
S$
1+
41·10
S$
S$
Voltage
Power
230 V ac
87 W
Speed
Chuck Capacity
Plug Type
British 3 pin BS
1363
Mini-Tool Kits - Drills
8000 - 25000 rpm
1 - 3.2 mm (Collet)
Stock no.
Price
per
487-1389
unit
OM
S$
1+ 115·50
High Speed Drill Kit
A drill kit which includes high speed mini-drill, a plug in 230240Vac mains transformer and 20 accessories for drilling,
grinding, routing and shaping.
Mini-Tool Accessories Kits - Cutting &
Drilling
Voltage
Speed
Mandrels
12 Vdc
16000 rpm
Chuck Capacity
0.4 - 3.2 mm
A set of 3 mandrels for use with grinding wheels, polishers
and cutting discs.
2.4mm shank
Plug Type
Stock no.
British 3 pin BS 1363
472-3145
Price per
unit
OM
S$
S$
S$
1+ 145·00
Stock no.
Price per
OM
S$
472-3022
bag of 3
1+
8·70
S$
Cutting Wheels
Variable Speed Drill Kit
A versatile kit for precise and accurate work. The kit contains
a high speed 25W drill with keyless chuck, a variable speed
transformer(0-12V) and 11 accessories for drilling, grinding,
routing and shaping.
Voltage
Power
12 Vdc
25 W
Speed
Chuck Capacity
7000-30000 rpm
0.4 - 3.2 mm
Carborundum, 22mm diameter, cutting discs.
Plug Type
Stock no.
British 3 pin BS 1363
472-2776
Price per
unit
OM
S$
S$
S$
1+ 250·00
Stock no.
Price per
OM
S$
472-3173
bag of 36
1+
12·20
S$
Diamond Cutting Wheel
Cordless Rotary Tool Kit
Rechargeable (1 hour charging time)
2-position handle, straight or pistol grip, for easy access
4 collet chucks - 1.0, 2.35, 3.0 & 3.2mm dia.
Spindle locking button for fast, easy tool changing
Supplied with: Charger, 75 accessories for drilling, carving,
cutting, engraving, etc., Aluminium carry/storage case
Voltage 7.2 Vdc
Speed 10000, 20000 rpm
Plug Type
British 3 pin BS 1363
1866
Chuck Capacity
A 22mm diameter diamond cutting wheel complete with
mandrel for cutting hard materials.
3.2mm shaft diameter
1 - 3.2 mm (Collet)
Stock no.
472-3038
Stock no.
487-1373
Price per
unit
OM = Order Multiple
OM
S$
1+
69·00
S$
S$
Price per
unit
OM
S$
1+
39·10
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Diamond Disc Cutter
60 Piece Cutting & Grinding Set
A one-piece 5mm diamond disc and mandrel for precise
cutting of PCB tracks etc.
60 Piece Cutting and Grinding Set to fit all makes of mini
rotary tools.
Shafts: 2.35mm and 3.2mm diameter
Includes grinding stones and wheels, reinforced cutting
discs, carborundum slitting discs, mini steel circular saw
blades and diamond cutting blades
For various cutting and preparatory tasks on smaller
workpieces
Stock no.
472-3016
Price per
unit
OM
S$
1+
22·20
S$
S$
Diamond Bit Set
Shank diameter 2.3mm for use with all mini power tools
Suitable for grinding, shaping, engraving etc.
Contents
Contents
8 parallel side bits
3 taper side bits
3 ball end tips
3 taper tips
Stock no.
487-1395
4 x diamond cutting blades (2 x 22mm and 2 x 15mm)
4 x mini steel circular saw blades (2 x 22mm and 2 x 15mm)
30 x carborundum slitting discs (5 x 30mm and 25 x 22mm)
11 x grinding stones (6 x 3.2mm shaft and 5 x 2.35mmm shaft)
8 x grinding wheels (4 x fine grinding wheels)
3 x mandrels
1 cone tip
1 thistle tip
1 oval tip
Price per
unit
OM
S$
1+
29·90
S$
S$
Stock no.
612-9595
Price per
unit
30 Piece Diamond Engraving Bit Set
Dremel General Purpose Set
30 Piece Diamond Engraving Bit Set to fit all makes of mini
rotary tools.
Shafts: 3.2mm
Includes various shapes - round, cone, taper, flame and
cylinder
Ideal for craft engraving on glass, metals, stone and
plastics. Also for security marking tools, equipment and
other valuables
A general purpose accessories set.
Stock no.
612-9589
Price per
unit
OM
S$
1+
17·90
S$
S$
Contents
OM
S$
1+
37·40
S$
S$
Cutting Kit
37 Cut off wheels
1 Bristle Brush
4 Polishing wheels
1 Polishing Compound
1 Alum/Oxide Grinding wheel
1 Silicon Carbide Grinding Stone
4 Drum sanders
1 High Speed cutter
1 Screw Mandrel
1 Set Screw Mandrel
A 12-piece fine and medium cutting set for cutting into
plastics and woods etc.
Stock no.
508-2473
75
Price per
unit
OM
S$
1+
36·30
S$
S$
S$
S$
400 Piece General Purpose Set
Stock no.
472-2928
Price per
1 set
OM
S$
1+
38·90
S$
S$
24 Piece HSS Carving & Milling Set
Contents
24 Piece HSS Carving & Milling Set to fit all makes of mini
rotary tools.
High Speed Steel mini carving and milling burrs
Shafts: up to 3.2mm
Includes various shapes: round, cone, taper and cylinder
Suitable for use on wood, plastic, stone, glass and
metals
Stock no.
612-9573
Price per
unit
OM
S$
1+
22·80
A comprehensive set of mini rotary tool accessories for drilling, cutting,
grinding, sanding, shaping, engraving, polishing, cleaning and de-rusting.
Fits a wide variety of rotary tool brands such as Dremel, Rotacraft,
Performance Power, Proxxon, Minitool, Boehler, Minicraft and Black &
Decker Wizard.
S$
S$
4 x Collets (1.5, 2.35, 2 x 3.2mm dia.)
4 Drill Bits (2x1.5, 2x2.35mm)
1 Polishing Wheel Shank
4 Big Polishing Wheels
1 Cotton Wheel
6 Small Polishers
2 Rubber Wheels
5 Diamond Points
10 Grinding Stones
12 Grinding Wheels
3 Mandrels
Stock no.
499-9134
30 Piece HSS Mini Drill Bit Set
30 Piece HSS Mini Drill Bit Set to fit all makes of rotary tools.
High Speed Steel
Sizes: 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.35 and 3.0mm
diameter
For precision drilling in smaller workpieces, including
wood, plastics, perspex, circuit board and soft metals
Stock no.
612-9567
Price per
unit
OM
S$
1+
22·20
S$
S$
1+
57·50
2.4mm shaft diameter
Maximum speed of rotation - 1200rpm
Description
Steel Brushes - Pencil
Steel Brushes – Wheel
Steel Brushes - Cup
Brass Brushes - Pencil
Brass Brushes – Wheel
Brass Brushes - Cup
7 cutting wheels
6 PCB drills
1 grinding wheel
6 routing tools
2 mandrels
3 radial brushes
Burr
Yes Number of Pieces 25
Buffs
No Product Category Drilling and Cutting Set
Cutting Wheel Yes
472-2912
OM
S$
Contents
Stock no.
unit
Polishing/Cleaning Brushes
A 25-piece drilling and cutting kit.
Drill/Cutting Kit
Price per
RS Mini-tool Accessories - Polishing &
Finishing
Drilling/Cutting Kit
Description
167 Cutting Discs
5 Reinforced Cutting Discs
2 Sander Drum Mandrels
12 Sanding Drums
1 Flap Sander
150 Sanding Discs
4 Wire Brushes
3 Nylon Brushes
2 Milling Cutters
1 Sharpening Stone
1 Spanner/Screwdriver
Price per
1 set
OM
S$
1+
61·50
S$
Stock no.
Price per
OM
S$
472-2934
472-2940
472-2956
472-2962
472-2984
472-2990
bag of 3
bag of 3
bag of 3
bag of 3
bag of 3
bag of 3
1+
1+
1+
1+
1+
1+
14·10
15·70
15·70
15·70
15·70
15·70
S$
New products available online every week
1867
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
30 Piece Cleaning & Polishing Set
Diamond Bit
30 Piece Cleaning and Polishing Set to fit all makes of mini
rotary tools.
Includes wire and nylon brushes, felt and cotton buffs, as
well as sander bands
Shaft diameters 2.35mm and 3.2mm
Ideal for precision work, hobby, craft, electronics and
smaller DIY tasks
A Diamond bit with a 2.35mm dia shank which will fit most mini power tools
1.8mm Dia Head
Stock no.
472-2877
Stock no.
612-9551
Price per
OM
S$
1+
11·70
unit
S$
S$
Price per
Set of polishing wheels on mandrels with buffing paste
2.4mm shaft diameter
1 x 22mm felt wheel
1 x 22mm wool wheel
Pot buffing/polishing paste.
472-2883
472-3000
75
OM
S$
1+
13·00
1 set
19·50
S$
S$
Engraving Bit Set
Stock no.
Price per
S$
1+
Comprises of 3 different engraving bits. All have 2.35mm dia
shanks which will fit most mini power tools
Round head, 1mm diameter
Round head, 1.4mm diameter
Oval head, 1.5mm
Buffing Kit
Stock no.
OM
unit
S$
Price per
OM
S$
1+
39·10
unit
S$
S$
Chucks, Stands & Drives
25 Piece Sanding & Shaping Set
Power Drill Chucks
25 Piece Sanding and Shaping Set to fit all makes of mini
rotary tools.
Includes flap wheels, sander bands and sanding discs
Shaft diameters 2.35mm and 3.2mm
For sanding and shaping various materials
Ideal for use on smaller workpieces and precise tasks
High quality chucks of different grades
Suitable for a wide variety of applications
Multi-craft Chuck: Light duty chucks with hardened jaws & gear teeth, & knurled
pressed steel outer sleeves
Super-craft Chuck: A medium duty chuck with hardened jaws & gear teeth with
machined steel sleeves
Chuck keys available separately
Description
Capacity
Mounting Key Type Stock no.
Multi-craft Chuck K10ACG
1.5 → 10 mm 3/8x24
KG
535-310
Multi-craft Chuck K13AC30
1.5 → 13 mm 1/2x20F
K30S
535-332
Super-craft Chuck 13SC
1.5 → 13 mm 1/2x20F
S2
535-354
S2 Chuck Key
–
–
S2
535-360
KG Chuck Key
–
–
KG
535-382
Stock no.
612-9539
Price per
unit
OM
S$
1+
12·50
S$
S$
Cutting & Finishing Set - 7-Piece
Description
Contents
Multi-craft Chuck K10ACG
Multi-craft Chuck K13AC30
Super-craft Chuck 13SC
S2 Chuck Key
KG Chuck Key
Description
16mm saw & Mandrel
Felt Wheel (Hard) & Mandrel
Felt Wheel (Soft) & Mandrel
Burrs
Cup Brush (Brass)
Wheel Brush (Brass)
Stock no.
543-967
Quantity
1
1
1
2
1
1
Price per
1 kit
Stock no.
535-310
535-332
535-354
535-360
535-382
Price per
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
22·30
32·10
38·80
5·50
3·69
Plain Bearing Chucks
OM
S$
1+
33·50
S$
S$
S$
Mini-Tool Kits - Engraving
An engraving kit which is comprised of:
Engraver with plug-in 230-240Vac transformer
Diamond engraving bit and 2 grinding stones
Stencil for letter marking plastics and metals
S$
Danaher Tool Group
Jaws centre ground for absolute straightness and alignment
Through hardened sleeve teeth, hardened nose and keyholes ensure
outstanding wear resistance
One piece sleeve eliminates crack between driving teeth often found in
other designs
Each chuck 100% inspected for performance and precision
Description
Chuck
Arbor 2 Morse
Chuck
Chuck Key
Chuck Key
Engraving Kit
S$
Capacity
0.7 → 13 mm
–
5 → 20.3 mm
–
–
Description
Capacity
Stock no.
Chuck
Arbor 2 Morse
Chuck
Chuck Key
Chuck Key
0.7 to 13 mm
–
5 to 20.3 mm
–
–
401-245
401-251
406-802
406-818
406-824
Price per
unit
unit
unit
unit
unit
Mounting
6JT
6JT
3JT
–
–
OM
Key Type
K3
–
K4
K3
K4
S$
Stock no.
401-245
401-251
406-802
406-818
406-824
S$
S$
S$
S$
1+ 75·00
1+ 14·20
1+ 124·00
1+
6·30
1+
9·50
Three-Jaw Pin Chuck
Stock no.
472-3117
Price per
OM
unit
S$
S$
S$
1+ 110·00
Engraving Pen
An engraving pen which is fitted with a 2 pin plug for a
separate 12Vdc power supply, see stock no 472-2899 or
"(’472-3123.’)""">472-3123.
Supplied with: diamond bit.
A 3-jaw automatic pin chuck, which enables twist drills with
shank diameters between 0.5mm and 3.5mm to be held in a
drilling machine or power drill. All steel construction with
blackened finish. The chuck body includes a cross-hole to
accommodate a tommy bar (included).
Mounting is 6.5mm diameter
Stock no.
600-745
Price per
unit
OM
S$
1+
34·40
Keyless Chucks Hammer Capable
Plug Type
Stock no.
472-2861
1868
Price per
unit
OM = Order Multiple
OM
S$
1+
66·00
S$
S$
Danaher Tool Group
Hammerlockᓽ mechanism - maintains full gripping pressure during
hammer drilling to prevent drill slippage
Hard nose - protects chuck from damage & work surface abrasion
Nose dust shield - forms a seal around the drill bit to protect the internal
mechanism
Rugged construction - provides extended service over the most
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Electricians Masonry Drill Set
demanding concrete hole drilling operations
Reversing - will fit reversing as well as non-reversible drills
Mounting
Capacity (mm)
3/8x24F
1/2x20F
10
13
Stock no.
401-201
401-239
Price per
unit
unit
OM
S$
1+
1+
42·40
53·00
S$
S$
Contents
Drill Size mm
4, 5 & 5.5
6 & 6.5
7, 8, 10, 12 & 13
7, 8, 10, 13, 16 & 22
Drive Shaft, Flexible
Flexible Drive Shaft for use with power tools
3-Jaw keyless chuck
Overall Length
Input shaft dia.
1.4 m
6mm
Chuck capacity
Max. speed
Most commonly used masonry drills for electrical
installation & maintenance work
Easy access plastic wallet roll
6mm
6000r.p.m.
Stock no.
512-2420
Length mm
85
100
150
400
Price per
1 set
OM
S$
S$
S$
S$
S$
1+ 113·50
Special Application Drill Sets
Stock no.
463-3036
Price per
OM
unit
S$
S$
S$
1+ 115·50
Masonry Drills - SDS & SDS Max.
5 Piece Glass Drill Set
For ceramic, tile & glass
Fluteless straight shank masonry drill bit
4, 5, 6 & 8mm dia
Purpose designed spear-point carbide tip
All drill bits are SDS shank for use in drills with a suitable SDS chuck.
SDS Drills
Blackened Shank
Tungsten Carbide Tip
Description
Stock no.
511-9682
Stock no.
5diax110Lx50mm flute
5diax160Lx100mm flute
5.5diax160Lx100mm flute
6diax110Lx50mm flute
6diax160Lx100mm flute
6.5diax160Lx100mm flute
7diax110Lx50mm flute
8diax110Lx50mm flute
8diax160Lx100mm flute
8diax210Lx150mm flute
10diax160Lx100mm flute
10diax210Lx150mm flute
10diax310Lx248mm flute
10diax450Lx388mm flute
10diax600Lx540mm flute
12diax160Lx100mm flute
12diax200Lx150mm flute
12diax450Lx410mm flute
13diax310Lx250mm flute
14diax160Lx100mm flute
14diax210Lx150mm flute
16diax210Lx150mm flute
16diax450Lx400mm flute
16diax600Lx540mm flute
18diax450Lx410mm flute
20diax210Lx150mm flute
20diax310Lx250mm flute
20diax450Lx410mm flute
25diax450Lx390mm flute
Price per
562-472
562-375
562-476
562-494
562-365
562-404
562-426
562-498
562-448
562-466
562-460
562-450
562-454
562-444
562-381
562-371
562-488
562-523
562-527
562-438
562-432
562-511
562-501
562-410
562-393
562-397
562-387
562-482
562-400
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
4·97
7·90
7·15
6·95
7·90
7·35
7·70
6·10
8·25
11·00
9·50
8·55
15·50
22·50
32·80
11·00
12·50
22·80
17·40
14·40
16·00
18·10
34·90
55·50
31·60
24·40
36·80
38·90
72·00
S$
Masonry Drill Sets
Standard Length Plain Shank Set
Tungsten Carbide tipped masonry drill
Rolled flute for rigidity
For use with hammer drills
8 piece set
3 - 10mm dia in 1mm increments
Stock no.
349-9150
Price per
unit
OM
S$
1+
34·80
1 set
OM
S$
1+
52·50
S$
TiN Coated Saw Drill
75
TiN Coated Saw Drill
A unique 6mm diameter drill with 90 cutting edges along
the flute edge and titanium nitride coating for resistance
to abrasive materials
130° split point eliminates the need for pilot drill
Use on ferrous/non-ferrous metals , wood plastics
Stock no.
445-2770
Price per
unit
OM
S$
1+
16·80
S$
S$
S$
S$
S$
S$
S$
S$
Power Tool Driver Bits
9 Piece Max Grip Brute Pozidriv Bit
Microrough surface, resulting in a very firm grip
Titanium Nitride coating
Supplied in a handy, tough, pocket sized flip box
25mm bits
Supplied with: QC UH quick change holder
Sizes in Set Pz1 (2x); Pz2 (4x); Pz3 (2x), (+QC UH quick change holder)
Stock no.
559-600
All Masonry Drill Sets can be used with Hammer Action Drills.
Price per
Price per
1 set
OM
S$
1+
65·00
89mm Phillips Driver Set
Highly resistant to fracture and wear
¼in. hexagon Drive
Supplied in sets of three sizes No 1, 2 & 3
89mm Long
Stock no.
491-5467
Price per
1 set
OM
S$
1+
50·00
OM
S$
1+
35·20
S$
152mm Phillips Driver Set
Highly resistant to fracture and wear
¼in. hexagon Drive
Supplied in sets of three sizes No 1, 2 & 3
152mm Long
Masonry Drill Set
Stock no.
491-5489
Price per
1 set
9 high quality masonry drills
Tungsten carbide tipped
Drill sizes; 4-12mm dia in 1mm increments
Plain shank
Stock no.
694-425
Price per
1 set
OM
S$
1+
50·50
S$
Many more leading brands from over 2,500 suppliers available online
1869
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Supplied with: UH54 Bit Holder
89mm Pozidriv Bit Set
Type
Torx Drive Size
Bit Length 25 mm Sizes in Set
Highly resistant to fracture and wear
¼in. hexagon Drive
Supplied in sets of three sizes No 1, 2 & 3
89mm Long
Stock no.
558-928
1/4in. Hex
T10; T15 (x2); T20 (x2); T25 (x2); T27; T30(x2); T40 (+UH54 bit holder)
Price per
OM
S$
unit
12+
1·57
S$
S$
12 Piece Extra Hard Mixed Set
Stock no.
Price per
491-5473
1 set
OM
S$
1+
45·00
S$
S$
152mm Pozidriv Bit Set
Highly resistant to fracture and wear
¼in. hexagon Drive
Supplied in sets of three sizes No 1, 2 & 3
152mm Long
Stock no.
Type
Mixed Drive Size 1/4in. Hex
Bit Length 25 mm Sizes in Set PH1, PH2 (x2), PH3; Pz1, Pz2 (x2), Pz3; Slotted: 0.6x4.5, 0.8x5.5, 1.2x8.0 (+UH54 bit holder)
Stock no.
Price per
491-5495
1 set
OM
S$
1+
41·30
S$
S$
Stock no.
PH No 1
PH No 2
PH No 3
PZ No 1
PZ No 2
PZ No 3
Price per
491-5394
491-5401
491-5423
558-849
558-843
558-861
1 set
1 set
1 set
unit
unit
unit
OM
S$
1+
1+
1+
3+
3+
3+
13·20
7·15
6·05
2·19
2·19
2·32
S$
Drive Size
Sizes in Set
Stock no.
Price
per
558-887
unit
OM
Stock no.
S$
unit
OM
S$
1+
73·00
S$
S$
Bosch HSS-G twist drill set with 1/4in hex drive shank allowing direct
coupling to pwer tool without the use of an adaptor.
Direct tool connection without adaptor guarantees a secure hold.
Set contains five sizes: 2, 3, 4, 5 & 6mm
Supplied in handy plastic storage cassette
S$
5+ 2·10
Price per
1 set
Bosch 1/4in hex HSS drill set
Stock no.
Price
per
OM
S$
678-0904
unit
1+
215·00
S$
S$
Bosch 19 Piece HSS-R Drill Bit Set
Contains drill sizes from 1.0 to 10mm (0.5mm steps)
19 Pieces
Supplied in sturdy cassette organiser
Torx
25 mm
1/4in. Hex
T10; T15; T20; T25; T30; T40 (+UH54 bit holder)
558-833
S$
Metalworking drills.
7 Piece hardened Torx bit set
T10 to T40
Designed to be highly resistant to fracture and breakage
25mm in length
1/4in. Hex drive
Manufactured to DIN 3126 standards
Supplied with: UH54 Bit Holder
Stock no.
S$
Drill Bits & HSS/Masonry Sets
7 Piece Extra Hard Torx Set
Type
Bit Length
Drive Size
Sizes in Set
2·65
Price per
559-587
1/4in. Hex
T10; T15; T20; T25; T30
S$
S$
12+
S$
5 Piece hardened Torx bit set
Designed to be highly resistant to fracture and breakage
25mm in length
1/4in. Hex drive
Manufactured to DIN 3126 standards
Torx
25 mm
OM
unit
Sizes PH1, PH2, PH3; Pz1, Pz2, Pz3; T15, T20, T25; Slotted: 0.6x4.5,
in Set 0.8x5.5, 1.2x8.0mm (+Quick change bit holder)
5 Piece Extra Hard Torx Set
Type
Bit Length
Price per
Robust and practical pocket-size design
Contents can be seen at a glance
Phillips, Slotted, Pozidriv and Torx bits
Quick and easy removal and storage
25mm
1/4in. Hex Drive
Supplied in sets of three
Suitable for high torque peaks during work
Resistant to slippage and jumping out of the screw head
Excellent for removing rusted screws
Excellent wear resistant
In Philips and Pozidriv styles
Description
558-837
13 Piece Extra Hard Mixed Set
TiN Coated Power Tool Screwdriver
Bits
75
12 Piece hardened bit set
Contains Phillips, Slotted, and Pozidriv bits
Designed to be highly resistant to fracture and breakage
25mm in length
1/4in. Hex drive
Manufactured to DIN 3126 standards
Supplied with: UH54 Bit Holder
OM
S$
1+
31·70
S$
Stock no.
Price
per
OM
S$
444-2262
unit
1+
32·80
S$
S$
S$
18 Piece Masonry/HSS/Wood Dial a Drill Set
9 Piece Max Grip Torx Set
Robust and practical pocket-size design
Contents can be seen at a glance
Quick and easy removal and storage
T10 to T40
25mm
1/4in. Hex Drive
Sizes in
Set
T10, T15, T30,T40 (x1); T20, T25 (x2) (+Quick change bit holder)
Masonry 3, 4, 5, 6, 8 & 10mm dia
Steel 3, 4, 5, 6, 8 & 10mm dia
Dowelling Drills (Wood) 3, 4, 5, 6, 8 & 10mm dia
Stock no.
511-9676
Stock no.
559-593
Price per
1 set
OM
S$
1+
65·00
12 Piece Extra Hard Torx Set
12 Piece hardened Torx bit set
T10 to T40
Designed to be highly resistant to fracture and breakage
25mm in length
1/4in. Hex drive
Manufactured to DIN 3126 standards
1870
OM = Order Multiple
S$
S$
Price per
1 set
OM
S$
1+
70·50
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Drill Accessory Sets
Woodworking Bits
61 Piece Driver Bit Set
Supplied in a fold-out carry case
Woodwork Flat Drill Bit
General purpose flat wood drills for use in power tools
Contents 61 Pcs
Set Contents
Stock No
184-7478
484-8474
Contents
10, 13, 16, 20, 22 & 25mm
10, 13, 16, 20, 22 & 25mm
Description
Stock no.
6 Piece Flat Bit Wallet Set
6 Piece Flat Bit Tube Set
Stock no
420-3837
Package
Telescopic Tube
Plastic Wallet
184-7478
484-8474
Price per
1 set
1 set
Philipsᓼ Bits
Pozidrivᓼ Bits
1 x No 1; 3 x No 2; 2 x 5 x No 1; 10 x No 2; 5 x No 3
No 3
Hexagon Bits (mm) Torxᓼ Bits
Slotted Bits
(mm)
4, 4.5, 5, 6, 7, 8 2, 2.5, 3, 4, 5, 5.5, 6, 7, T10, 2 x T15, 2 x T20, 2 x T25,
8
T27, T30, T40
Other pieces
Tamperproof Torxᓼ Bits T8H, T10H, T15H, T20H, T25H; ¼ in Socket
Adapter; ¼ in Magnetic Bit Holder
OM
S$
1+
1+
81·00
34·00
S$
S$
Description
Stock no.
61 Pcs set
420-3837
Price per
unit
OM
S$
1+
38·60
S$
S$
216 Piece Complete Drill & Bit Set
Drill And Driver Sets
X-Line
A choice of four combination drilling/screwdriving/tool sets with
30 - 100 pieces in attractively designed, stable and robust "X"
styled carrying cases. All sets contain drill bits for wood, metal,
plastic and an exhaustive selection of screwdriver bits. All sets
(except the 30 piece) include a selection of commonly used
tools.
X-Line design cases for easy drill and bit selection
A built-in viewing window allows visibility of the entire
contents
Case contains swivel-mounted and removable bit holders
The contents are listed on the back of each case
Contents 216 Pcs
Stock no
458-1913
Flat Wood Bits (mm)
5 Standard + 2 Long Flat Bits
Hex Sockets (mm)
20 x Hex Sockets
Contents 100 Pcs
Stock no
613-8735
Wood Bits (mm)
3,4,5,6,7,8,10
Pozidrivᓼ Bits
0,0,1,1,2,2,2,3,3,3 (25mm)
Torxᓼ Bits
T10,T10,T15,T15,T20
T20,T25,T25,T30,T40
(25mm )
Manu. Part No.
HSS Drill Bits (mm)
1,1.5,2x2,2.5,2x3,3.5,2x4,
4.5,5,5.5,6,6.5,7,8,10
Flat Wood Bits (mm)
16,22,32 (25mm)
Slotted Bits
4,4,6,6,7,7(25mm)
Hex Sockets (mm)
4,5,6,7,8,9,10,11,13
Masonry Bits (mm)
3,4,5,5.5,6,7,8
Contents 70 Pcs
Stock no
613-8757
HSS Drill Bits (mm)
1.5, 2, 2.5, 3, 3.5, 4
4.5, 5, 5.5, 6, 6.5
Flat Wood Bits (mm)
16, 22, 32
Wood Bits (mm)
4, 5, 6, 8, 10
Pozidrivᓼ Bits
1, 2, 3 (50mm)
1, 2, 2, 3 (25mm)
Torxᓼ Bits
T20, T25 (50mm)
T10, T15, T20, T25, T40 (25mm)
Masonry Bits (mm)
4, 5, 6, 7, 8, 10
Philipsᓼ Bits
1, 2, 3 (50mm)
0, 1, 1, 2, 2, 3 (25mm)
Hexagon Bits (mm)
3, 4, 5, 6 (25mm)
Slotted Bits
4, 6 (50mm)
4, 6, 7 (25mm)
Hex Sockets (mm)
4, 5, 6, 7, 8, 9, 10
Wood Bits (mm)
4, 5, 6, 8, 10
Pozidrivᓼ Bits
1, 2, 2, 3 (25mm)
Torxᓼ Bits
T15, T20, T25 (25mm)
Masonry Bits (mm)
4, 5, 6, 7, 8, 10
Philipsᓼ Bits
1, 2, 2, 3 (25mm)
Hexagon Bits (mm)
3, 4, 5, 6 (25mm)
Other pieces
diameter gauge,stanley knife
magnetic universal bit holder
countersink,socket adapter
Wood Bits (mm)
4, 5, 6, 8
Slotted Bits
4, 6 (25mm)
HSS Drill Bits (mm)
1.5, 2, 2.5, 3, 3.5, 4
4.5, 5, 5.5, 6, 6.5
Philipsᓼ Bits
1, 2, 3 (25mm)
Torxᓼ Bits
T20,T25
Description
Stock no.
100 Pcs Set
70 Pcs Set
50 Pcs Set
30 Pcs Set
613-8735
613-8757
613-8741
613-8729
Price per
1 set
1 set
1 set
1 set
TC-Masonry Drill Bits (mm)
4, 5, 6, 7
S$
1+
1+
1+
1+
73·00
60·00
41·40
21·90
S$
S$
S$
1+ 174·00
Jigsaw - T Type Shank
Bosch single lug shank blades
Individual types sold in packs of 3 blades
Suitable for Bosch, AEG, Dewalt, Elu, Hitachi, Holz-Her,
Makita, Metabo, Haffner and Maffel jigsaws
Blade set:
Carded set, suitable for quick, coarse and curved cuts in
wood, plastic, metal, non-ferrous metal and aluminium
Contains 10 blades, 2 each of: T101B, T111C, T119BO,
T118A, T127D
S$
Applications
Hardwood; Softwood; Plywood; Chipboard
Perspex; Plastics; Insulation Material (2-30mm)
Curved Cuts in Wood. Also Suitable For Plunge
Cutting (6-60mm)
Straight and Fine Cuts:Hardwood; Softwood
Plywood; Block Board;Laminated Fibre Wood Board (4-30mm)
Tight Curves:Hardwood; Softwood; Plywood
Chipboard; Perspex; Plastics (2-30mm)
Straight Parallel Cuts in Metal:Hardwood,Softwood
Chipboard. Plunge Cutting (6-60mm) Non-ferrous Metals
Aluminium; Perspex (1.5-3mm)
Non-ferrous and Ferrous Metals (4-6mm);Glass Fibre Reinforced Plastic
Lead;Pewter (4-20mm) Plastic (4-30mm)
Thick Material Straight Cuts: Ferrous and Non-ferrous Metal
Aluminium (3-6mm)
Special Straight Cuts: Steel; Non-ferrous Metal (2-5mm); Stainless Steel (1-2mm)
Description
Stock no.
10 Pcs Set
349-9504
Price per
1 set
OM
S$
1+
40·80
S$
S$
Universal Shank Blades
Pozidrivᓼ Bits
1, 2, 3 (25mm)
Other pieces
magnetic universal bit holder
OM
OM
T127D
75mm Cut x 3mm Pitch
T118B
50mm Cut x 2mm Pitch
T118AHM
50mm Cut x 1.1mm Pitch
10 Pcs Set (2 off each) T101B; T111C; T119BO; T118A; T127D
Contents 30 Pcs
Stock no
613-8729
Price per
unit
Jigsaw Blades And Sets
Blade Type
T111C
75mm Cut x 3mm Pitch
T244D
75mm Cut x 4mm Pitch
T101B
75mm Cut x 2.5mm Pitch
T119BO
50mm Cut x 2mm Pitch
T118A
50mm Cut x 1.2mm Pitch
Other pieces
Diameter gauge, 3 m measuring tape
magnetic universal bit holder,
countersink, socket adapter
HSS Drill Bits (mm)
1.5, 2, 2.5, 3, 3.5
4, 4.5, 5, 5.5, 6, 6.5
Flat Wood Bits (mm)
16, 22
Slotted Bits
4, 6, 7 (25mm)
Hex Sockets (mm)
7.8.10
458-1913
75
Application Table
Contents 50 pcs
Stock no
613-8741
Stock no.
P-44046
Philipsᓼ Bits
0,0,1,1,2,2,2,3,3,3 (25mm)
Hexagon Bits (mm)
3,4,5,6 (25mm)
Other pieces
4 Depth stops 3,5,8,10 mm dia 4 HCS Hole saws
32,38,45,54 mm dia
diameter gauge, torch,spirit level,ratchet
screwdriver,countersink, allen key,magnetic universal
bit holder,socket adapter
HSS Drill Bits (mm)
TC-Masonry Drill Bits (mm)
42 x HSS Drill Bits
11 Standard + 2 Long Masonry Bits
Philipsᓼ Bits
Pozidrivᓼ Bits
52 x 50mm Screw-driver Bits
52 x 25mm Screw-driver Bits
Other pieces
8 x 3-point Brad Bits; 3 x Hex Shank Brad Bits
4 Hole Saws + Arbor; 3 x Depth Stops
Allen Key; 2 x Nail Punches; Countersink
Spirit Level; 2 x Screwdriver Handles
Measuring Tape; Flexi Drive; 2 x Pencils
Universal shank jigsaw blades
Suitable for use in Black & Decker, Ryobi, Skil, Stayer,
Kress and Wolf machines using clamp screw fixing
S$
Blade Type
A5035/A2201
A5039/A2224
Cutting Tooth Pitch
Applications
Length (mm)
(mm)
75
2.5
Softwood; Hardwood; Plywood; Chipboard; Plastic
(max. 30mm)
55
1.2
Mild Steel; Aluminium; Non Ferrous Metal; 1-3 mm
Stainless steel.
Visit our website for additional price information and exciting promotions
Stock no.
325-7681
325-7653
1871
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Blade Type
A5034/A2226
A2222
Cutting Tooth Pitch
Length (mm)
(mm)
55
2
75
3
Blade Type
Stock no.
A5035/A2201
A5039/A2224
A5034/A2226
A2222
325-7681
325-7653
325-7669
325-7675
Applications
Stock no.
Mild Steel; Aluminium; Non Ferrous Metal;
Laminated Plastics (3-10mm)
Non Ferrous Metal; Aluminium
325-7669
Price per
unit
unit
unit
unit
OM
S$
5+
5+
5+
5+
4·55
3·79
3·05
4·47
S$
325-7675
Scroll
HSS jigsaw blades suitable for use in "old style" Makita
machines using clamp screw fixing.
55 mm
Tooth Pitch (mm)
1.2
2
Blade Type
Stock no.
No. 1
No. 8
325-7827
325-7710
Price per
unit
unit
OM
S$
5+
5+
2·73
2·61
Stock no.
325-7827
325-7710
S$
S$
T Shank Jigsaw Blades
T-type shank jigsaw blades suitable for use in AEG, Bosch,
ELU, Festo, Hitachi, Mafell, Makta and Metabo machines.
75
Blade
Type
T118A
T127D
T101D
Cutting Length Tooth
Applications
(mm)
Pitch
55
0.9 mm Mild Steel; Aluminium; Non Ferrous Metal (max. 3mm)
75
2.5 mm
Non Ferrous Metal; Aluminium; Plastic
75
4 mm
Softwood; Hardwood; Plywood; Chipboard; Plastic
(max. 60mm)
T101B
75
2.5 mm
Softwood; Hardwood; Plywood; Chipboard; Plastic
(max. 30mm)
T144D
75
4 mm
Softwood; Hardwood (max. 60mm)
T111C
75
3 mm
Softwood; Hardwood; Plastic (max. 60mm)
T101A
75
2.5 mm
Non Ferrous Metal; Aluminium; Pressed Metals;
Laminated Plastics
T118G
55
0.9 mm
Soft Steel; Aluminium; Non Ferrous Metal
Variable
110
1.8 → 2.5 Softwood; Hardwood; Wood with Nails; Steel; Stainless
Pitch
mm
Steel; Worktops
T118AF
55
1.2 mm
Mild Steel; Aluminium; Non Ferrous Metal; Steel
(1-3mm); Stainless Steel
T19BO
55
2 mm
Curve Cutting; Wood; Plastic
T150
55
*
Tiles; Stones; Ceramic Plastic; Fine Cut
Blade Type
Stock no.
T118A
T127D
T101D
T101B
T144D
T111C
T101A
T118G
Variable Pitch
T118AF
T19BO
T150
325-7833
325-7726
325-7849
325-7855
325-7861
325-7732
325-7776
424-4579
386-9565
325-7782
424-4529
325-7760
Price per
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
S$
5+
5+
5+
5+
5+
5+
5+
5+
5+
5+
5+
5+
4·87
4·47
3·34
4·77
3·30
2·68
5·40
3·61
7·75
5·90
2·50
9·45
Jigsaw - T-Shank Blade Sets
Universal Shank (Recip Saw)
S$
STET Shank Blades
Cutting Length
Blade Type
No. 1
No. 8
Recip Blades, Sabre Blades & Floorboard
Holesaw
S$
Stock no.
325-7833
325-7726
325-7849
325-7855
325-7861
325-7732
325-7776
424-4579
386-9565
Standard
Constant tooth pitch blades, similar to hacksaw blades
Fits the following manufacturers’ machines: AEG; Bosch;
Slope
B&D; Holz-Her; Flex; Fein; Hitachi; Makita; Metabo;
Milford; Milwaukee; Rockwell; Skil
Type
T P I Cutting Length
Application
(mm)
Scroll
18
100
Metal, Plastic
Standard
14
150
Metal, Plastic
Standard
8/12
150
Metal, Plastic
Standard
8/12
228
Metal, Plastic
Standard
8/12
300
Metal, Plastic
Slope
5/8
150
Metal, Plastic, Laminates, Wood
Type
TPI
Stock no.
Scroll
Standard
Standard
Standard
Standard
Slope
18
14
8/12
8/12
8/12
5/8
229-4156
229-4083
229-4099
229-4061
229-4077
229-4128
Price per
OM
S$
5+
5+
5+
5+
5+
5+
4·59
7·75
6·10
8·40
9·70
6·10
unit
unit
unit
unit
unit
unit
Stock no.
229-4156
229-4083
229-4099
229-4061
229-4077
229-4128
S$
S$
S$
S$
S$
S$
S$
S$
Impact Wrenches
Composite Impact Wrench
Composite housing
Multi-position power management
Ergonomic textured handle for improved grip control
Drive Size (Ins)
Air Inlet
Maximum Torque (Nm)
No Load Speed
Impact Rate
½
¼ BSP
814 Nm
9500 rpm
1200bpm
Average Air Cons
Vibration Level
Length
Weight
125 l/min
4.6 m/s2
184 mm
1.90 kg
325-7782
424-4529
325-7760
Stock no.
522-6263
Price per
unit
OM
S$
1+
325·00
S$
¾ in. Impact Wrench
Best power-to-weight ratio and size in its class
Composite technology, unbeatable performance
Twin hammer Plus TM mechanisum provides maximum
durability
Four position power regulator and forward/reverse control
In handle exhaust and 360 degree swivel inlet
Drive Size (Ins)
Air Inlet
Maximum Torque (Nm)
No Load Speed
Impact Rate
Pott & Honscheid
Stock no.
522-6279
Contains the most commonly used blades
¾
3⁄8
BSP
1500 Nm
7250 rpm
1175bpm
Average Air Cons
Vibration Level
Length
Weight
Price per
unit
270 l/min
5.9 m/s2
208 mm
3.1 kg
OM
S$
1+
1000·00
Drills
10mm Straight Air Drill
This lightweight and versatile straight drill is the ideal
tool for use with mild steel and general workshop
materials
Supplied with chuck key and full instructions
Air Inlet (BSP)
Chuck Size
Free Speed
Description
10 Pcs General
Purpose
6 Pcs Metal
Blade Type
T11C (3); T118A (2); T119B
(3); T119BO (2)
2 each of T118A; T118B;
T118G
Description
Stock no.
10 Pcs General Purpose
6 Pcs Metal
1872
386-9593
386-9616
Applications
Softwood; Hardwood; Plywood; Chipboard;
Insulation Board; Plastic; Mild Steel;
Aluminium; Non-Ferrous Metal
Mild Steel; Aluminium; Non-Ferrous Metal;
Laminated Plastics
Price per
1 set
1 set
OM = Order Multiple
OM
S$
1+
1+
32·00
21·90
S$
1⁄4
in.
10 mm
4500 rpm
Length
Reversible Action
Vibration Level
216 mm
No
1.6 m/s2
Stock no.
386-9593
Stock no.
386-9616
684-507
S$
* manufacturers information unavailable at time of printing
Price per
unit
OM
S$
1+ 225·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Mini Angle Grinder
10mm Angle Air Drill
Powerful 1⁄3 HP motor
Safety release throttle
Multi-positional head
All ball bearing construction giving a longer life and
advanced durability
Ergonomic and durable composite housing
An extremely lightweight and versatile angle dril
1/4in BSP Female connection
Reversible action and 90° head
Ideal for close quarters working
Supplied with chuck key and full instructions
1⁄4
in.
10 mm
1800 rpm
Air Inlet (BSP)
Chuck Size
Free Speed
Length
Reversible Action
Vibration Level
206 mm
Yes
0.9 m/s2
Air Inlet
Collet Size
Free Speed
¼ in BSP
6 mm
20000 rpm
Stock no.
Stock no.
684-513
Price per
unit
OM
S$
1+
270·00
S$
S$
in.
10 mm
2000 rpm
Length
Reversible Action
Vibration Level
163 mm
Yes
0.4 m/s2
Air Inlet
Collet Size
Free Speed
¼ in BSP
6 mm
25000 rpm
Stock no.
522-6421
Stock no.
522-6285
Price per
OM
unit
S$
S$
S$
Length
Vibration Level
Price per
OM
unit
S$
171 mm
3.4 m/s2
S$
S$
S$
1+ 210·00
75
Heavy duty, high quality angle grinders with side handle for
complete control. Supplied with operating leaflet and 2
grinding wheel replacement wrenches. Collet 3/8-24 UNF
¼ in BSP
Length
229 mm
12000 rpm
Vibration Level (m/s2) Manu. Part No. Stock no.
1.8
LA421-EU
535-506
2.7
LA422-EU
329-6901
Description
Stock no.
4in Angle Grinder
5in Angle Grinder
Reversible air drill with 13mm composite keyless chuck
Extra power for frame drilling, cylinder honing, hole
sawing and reaming
Dead handle included
1⁄4
in.
13 mm
500 rpm
522-6291
285·00
4in. & 5in. Angle Grinder
1+ 255·00
Air Inlet
Free Speed
Description
4in Angle Grinder
5in Angle Grinder
Stock no.
S$
1+
S$
13mm Pistol Drill
Air Inlet (BSP)
Chuck Size
Free Speed
OM
Powerful 1⁄3 HP motor
Safety release throttle
All ball bearing construction gives a longer life and
advanced durability
Ergonomic and durable composite housing
Applications include weld braking, deburring, grinding
and polishing
Reversible air drill with 10mm composite keyless chuck
Compact, lightweight and powerful
Tease throttle for precision speed control
1⁄4
Price per
unit
171 mm
2.5 m/s2
Straight Die Grinder
10mm Pistol Drill
Air Inlet (BSP)
Chuck Size
Free Speed
522-6308
Length
Vibration Level
unit
unit
unit
OM
S$
1+
1+
455·00
495·00
S$
S$
Screwdrivers, Cutters & Riveter
Length
Reversible Action
Vibration Level
Price per
535-506
329-6901
Price per
A wide range of high quality professional tools and accessories designed for use in a variety of heavy
duty applications. All tools and accessories are designed for use with a 1⁄4 in BSP connection system.
221 mm
Yes
0.3 m/s2
OM
S$
1+
380·00
S$
Reversible Pistol Screwdriver
S$
A general purpose pistol grip screwdriver with a reversible
positive action which offers full torque throughout rundown
Drive Size (In Hex)
Free Speed
Length
Ratchet Wrenches
¼ in.
1800 rpm
184 mm
Weight
Vibration Level
1.47 kg
0.8 m/s2
Heavy Duty Drive Ratchets
Compact ratchet driver with anti-slip forward/reverse
lever
Ball needle bearing construction and durable ratchet head
¼” BSP inlet size
Suitable for workshop, maintenance and general
engineering applications
Maximum Torque (Nm)
No Load Speed
Length
68
160 rpm
254 mm
Description
Stock no.
3/8in Sq Drive
1/2in Sq Drive
535-405
535-411
Price per
unit
unit
Stock no.
684-529
Weight
Average Air Cons
Vibration Level
OM
S$
1+
1+
200·00
280·00
OM
S$
1+
290·00
S$
S$
S$
S$
Reversible Straight
Screwdriver
1.1 kg
110 l/min
4.4 m/s2
S$
Price per
unit
S$
A lightweight screwdriver that has an adjustable clutch which
provides sensitive control
Drive Size (In Hex)
Free Speed
Length
¼ in.
1800 rpm
260 mm
Weight
Vibration Level
1.13 kg
1.1 m/s2
Grinders
Straight Grinder Kit
Stock no.
Set comprises straight die grinder, 10 wheels on spindle,
3mm adapter, 1⁄4 " supply connector and flat spanner
Supplied in a plastic case
Air Inlet
Collet Size
Free Speed
¼ in BSP
6 mm
22000 rpm
Length
Vibration Level
684-535
Price per
unit
OM
S$
1+
375·00
Riveter
168 mm
1.8 m/s2
This riveter will make light work of all riveting operations
Supplied with nipples for various shank sizes
Length
Weight
Stock no.
329-6917
Price per
unit
OM
S$
1+ 179·00
S$
S$
197 mm
1.98 kg
1.6 m/s2
Vibration Level
Stock no.
684-541
New products available online every week
Price per
unit
OM
S$
1+
210·00
1873
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Power Tools & Accessories
Stock no.
Spray Guns
829-003
A wide range of high quality professional tools and accessories designed for use in a variety of heavy
duty applications. All tools and accessories are designed for use with a 1⁄4 in BSP connection system.
Spray Guns
Stock no.
Small Spray Gun
Standard Spray Gun
672-071
672-087
Price per
OM
unit
unit
OM
unit
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
1+ 184·00
Air Guns And Vacuum Kits
Blow/Vacuum Gun
High quality spray guns for general spraying of all paints,
lacquers, preservatives, varnishes etc.
Manufactured to industrial standard
All metal construction with quick release container. Both
spray guns are quick and easy to strip for cleaning
Description
Tip Size Container Weight Stock no.
(mm)
Size (L)
(kg)
Small Spray
1.2
0.25
0.55
672-071
Gun
Standard
2
1
0.97
672-087
Spray Gun
Description
Price per
Air powered clean up guns that can be converted into a
vacuum or blow gun by unscrewing the rear of the gun,
reversing the venturi unit and screwing the gun back
together
The venturi/vortex action multiplies input and prevents
risk of stalling
Constructed from hard wearing maintenance nylon 6
that is also oil resistant and chemically inert
1⁄4 in BSP Inlet
Max working pressure 6 bar
Accessories available separately
S$
S$
S$
1+ 129·00
1+ 170·50
Stock no.
Air Brush Kit
806-763
A well balanced pistol grip air brush with gravity feed
cup, ideal where a large gun is impractical
The kit includes: pistol airbrush, gravity paint cup,
propellant adaptor, 5 feet of small bore hose & ¼ inch
reduction nipple
Price per
unit
OM
S$
1+
91·00
Accessories
Description
Stock no.
Flared Nozzle
Extension Tube
Crevice Tool
Dust Bag Kit
2m Conveyor Hose
75
806-791
806-808
806-814
806-785
806-820
Price per
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
14·00
14·00
7·75
32·90
9·60
Blow/Vacuum Gun Kit
Stock no.
Price per
250-1779
unit
OM
S$
1+
79·00
S$
S$
Sanders
A wide range of high quality professional tools and accessories designed for use in a variety of heavy
duty applications. All tools and accessories are designed for use with a 1⁄4 in BSP connection system.
Adjustable Speed Sander
Blow gun that converts to a suction gun at the flick of a wsitch by
moving the direction knob 90° clockwise (viewed from the rear).
To revert to vacuum mode, move the switch 90° anticlockwise
Constructed from moulded nylon
1⁄8 in G Inlet
Max Working Pressure 8 bar
Output Pressure 2.0 psi
Supplied in kit form, it incorporates a bayonet fitting for a range
of attachments
Fitted with a speed regulator
Ideal for paint stripping and rust removal
Pad Size
Speed
127 mm
18000 rpm
Vibration Level
Weight
1.2 m/s2
1 kg
Kit Contents
Gun
Dust bag
Flared Nozzle
Safety Nozzle
Suction Nozzles; 4mm, 8mm and 12mm
Stock no.
Stock no.
329-6923
Price per
OM
unit
S$
S$
S$
682-292
Price per
OM
1 kit
S$
1+ 250·00
1+ 155·50
Blow/Vacuum Gun Kit
Dual Action Quiet Sander
Ergonomically designed lightweight blow gun with
fluted handle for comfort
Sensitive trigger enabling easy control
Long angled nozzle enables user to reach awkward areas
1⁄4 in BSP Inlet
Max Working Pressure 10 bar
Dual action pad motion produces swirl free finishes
Adjustable built-in regulator for positive speed control
Built-in silencer
Balanced ball bearing construction
Low vibration, dependable performance
Applications: feather edging, metal preparation and finish work on
body filler
Dust Extraction
Pad Size
Speed
No
150 mm
10000 rpm
Stock no.
522-6320
6.3 m/s2
1.91 kg
Vibration Level
Weight
Price per
OM
unit
S$
S$
S$
1+ 182·00
Stock no.
198-1146
Chisels, Hammers And Saws
All the air hammers in this range have pistol grip handles, trigger control of speed and power, built in
power regulators and have alloyed steel barrels and heated treated pistons for longer life.
Air Operated Chisel Kit
Hexagonal shank short stroke hammer kit
6 different chisels to suit a variety of cutting, edging and
punching applications
Kit Contents
Hexagonal shank short stroke hammer
Wrench
Edging tool
Tailpipe cutter
Air Inlet
Impact Rate
Chisel Size
1874
¼ in. BSP
3500 bpm
10.2 mm
Straight chisel
Cutting chisel
Punch Chisel
Spotweld cutting chisel
Length
Vibration Level
Weight
OM = Order Multiple
172 mm
28.9 m/s2
1.81 kg
Price per
unit
OM
S$
1+
26·30
Safety Blow Gun
Ergonomic lightweight safety blowgun with lower
connection.
Robust threaded design
Metal thread securing pin allowing repeated secure
connections and disconnections
Integrated pressure regulator
Fixed non removable nozzle
Complies with OSHA STD 1-13 and 1910.95(b) standards,
as well as the 2003/10/CE directive
Standards: OSHA STD 1-13, 1910.95(b) standards and
2003/10/CE directive
Air Inlet
G1/4 Temperature Rating -15°C → +50 °C
Working Pressure (bar) 10
Stock no.
666-6772
Price per
1 kit
OM
S$
1+
355·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Power Tools & Accessories
Tyre Inflator
General Purpose Blow Guns
A one piece, die cast constructed blow gun with a durable
chrome finish, comfortable grip and precise air control
Tamper-proof vent holes increase total air flow
Max Working Pressure 7 bar
Output Pressure 2 bar
1⁄4 in BSP Inlet
Stock no.
535-499
Price per
unit
Industrial standard type inflator
Built-in quick air release button
Easy to read gauge and universal end piece
Reads up to 9 bar/130 psi
1⁄4 in BSP Inlet
OM
S$
1+
27·90
S$
831-157
Venturi action nozzle multiplies air volume output, and makes
gun completely safe, because - unlike conventional units - output
air flows around the unit and not through it
Manufactured from aluminium for longevity
1⁄4 in BSP Inlet
Max Working Pressure 12 bar
488-5568
Price per
OM
unit
S$
S$
S$
S$
S$
1+ 185·50
Air hoses
Venturi Air Gun
Stock no.
Stock no.
S$
Price per
unit
OM
S$
1+
70·50
Auto-Return Air Hoses
Two auto-return, polyurethane hose reels with spring operated
rewind action and ratchet stop device. Suitable for use with air
and cool water. Inlet is 1⁄4 in BSP and the hose is 8mm bore with
a max working pressure of 12 bar.
9m hose:
An open style unit with plastic outer casing and swivel
mounting bracket for both wall and ceiling mounting
10m hose
An enclosed unit with die-cast aluminium casing and pivot
mounting bracket
S$
S$
Blow Gun Kit
Kit contains a standard blow gun (stock no. 722-205) and a
safety blow gun (stock no. 726-342) along with an
additional standard blowgun that has 11 interchangeable
nozzles
Instructions for the standard blow gun apply to the
interchangeable gun
Supplied in a lightweight polypropylene case
1⁄4 in BSP Inlet
Max Working Pressure 10 bar
Output pressure 0.5 bar
Description
Stock no.
9m x 1m tail
10m x 2m tail
183-6131
183-6147
Price per
unit
unit
OM
S$
1+
1+
465·00
790·00
75
15m Air Hose
Plastic outer case complete with pivot bracket mounting
Hose ratchet stop device
1/4in connection
8mm Bore
Max Working Pressure 15 bar
2m tail
Operating temperature –5 to +40°C
Kit Contents
Guns
Standard blow gun RS Stock No 722-205
Safety blow gun RS Stock No.726-342
Blow gun for interchangeable nozzles
Stock no.
666-6779
Price per
unit
Nozzles
Standard Jet
Safety nozzle
Straight tube (long or short)
Angled tube (long or short)
Coanda nozzle
Booster nozzle
Air screen nozzle
Booster nozzle with air screen
Tube fitting nozzle
OM
S$
1+
220·00
S$
Stock no.
508-1824
Price per
unit
OM
S$
1+
530·00
S$
S$
S$
S$
Tool Balancers
Tool Balancers
S$
Light duty tool balancers for the easy stowage and
positioning of hand tools. etc. at their work stations
Designed for minimal maintenance and incorporating a smooth
progressive tension mechanism operated by turning a hand wheel
Features include: spring-loaded safety hook, a cushioning ball for cable
retraction and a clamp to set cable travel
Max Travel 1600mm
Weight – 0.7kg
Grease, Underseal & Caulking Guns
Air Operated Grease Gun
Accepts standard 400cc cartridges or can be bulk filled
Allows wide angle operation in a narrow space
Supplied complete with one rigid and one flexible nozzle
Working Pressure 30-150 psi
1⁄4 in BSP Inlet
Weight 1.5 kg
Note: It is advisable to decide to use this grease gun with
one method only (cartridge or bulk) to obtain the best
possible performance.
Stock no.
809-015
Price per
unit
OM
Description
0.4 - 1 kg capacity
1 - 2 kg capacity
2 - 3 kg capacity
S$
S$
S$
S$
S$
Stock no.
535-865
535-871
535-887
Price per
unit
unit
unit
OM
S$
1+ 76·00
1+ 82·50
1+ 121·00
1+ 112·00
Air Operated Caulking Gun
Accepts standard cartridges size 50×215mm (2×8 1⁄2 in),
volume 310ml
Suitable for the application of all sealants mastics etc.
Manufactured in metal for long life and robustness
Upon release of the applicating trigger, instant release of
pressure means that no over application of material is
possible
Working Pressure <70 psi
1⁄4 in BSP Inlet
Weight 1.3 kg
Stock no.
684-563
Price per
unit
OM
S$
1+
76·00
www.rssingapore.com
Many more leading brands from over 2,500 suppliers available online
1875
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement