SignaMax 16-Bay Rack Mount Media Converter Chassis User`s manual
Advertisement
Advertisement
Signamax FO-065-1200 series 12-Port Media Converter
Signamax
Connectivity Systems
FO-065-1185
Media Converter Chassis System
U
S E R
’
S
G
U I D E
User’s Manual
1
Signamax Connectivity Systems
F0-065-1185
Media Converter Chassis System
User’s Guide
Signamax
FO-065-1185 Media Converter Chassis System
P r e f a c e
This manual describes how to install and use the Signamax
FO-
065-1185 Media Converter Chassis System. The system introduced here is capable of housing up to sixteen media converters, each of which offers one channel media conversion solution:
10/100BaseTX 100BaseFX
100BaseTX
100BaseFX
100BaseFX
100BaseFX
(multi-mode, single-mode single-mode)
1000BaseT
1000BaseSX
1000BaseSX/LX
1000BaseLX
(multi-mode, single-mode single-mode)
In this manual, you will find:
•
Introduction on the Chassis System
•
Product features
•
Illustrative LEDs functions
•
Installation instructions
•
Specifications
User’s Manual 1
Signamax
FO-065-1185 Media Converter Chassis System
T a b l e o f C o n t e n t s
P REFACE
T ABLE OF C ONTENTS
P
RODUCT
O
VERVIEW
S IGNAMAX
FO-065-1185 M EDIA C ONVERTER C HASSIS
S YSTEM
P ACKAGE C ONTENTS
P RODUCT F EATURES
F RONT P ANEL D ISPLAY
Front Panel
Understanding LEDs
I NSTALLATION
S ELECTING A S ITE FOR THE E QUIPMENT
D ECIDING H OW TO I NSTALL THE S YSTEM
Mounted to 19-inch standard rack
Desktop or any flat surface
I NSTALLING M EDIA C ONVERTER
C ONNECTING TO P OWER
Power supply
Connecting to power
C OOLING S YSTEM
S
PECIFICATIONS
Chassis System
Power Supply
C
ONTACT
I
NFORMATION
1
2
3
6
6
7
7
7
8
9
9
9
11
12
12
12
3
3
4
5
5
5
13
2 User’s Manual
Signamax
FO-065-1185 Media Converter Chassis System
P r o d u c t O v e r v i e w
Signamax
FO-065-1185 Media Converter
Chassis System
Figure 1: Chassis equipped with two power supplies
Package Contents
When you unpack the product package, you shall find these items listed below.
P
P
P
P
P
P
Signamax
FO-065-1185 Media Converter
Chassis System
Two power supplies installed on the chassis
AC power cord
User’s Manual
Accessories: rackmount screws, brackets, & bracket screws
Media converter carriers, fitted to each bay
Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller.
User’s Manual 3
Signamax
FO-065-1185 Media Converter Chassis System
Product Features
♦ H OUSE UP TO SIXTEEN MEDIA CONVERTERS
♦ F RONT PANEL LED S FOR POWER STATUS
♦ S TANDARD 19” RACKMOUNTABLE SIZE , 2U
♦ N ON STOP OPERATION & MINIMAL DOWNTIME
♦ H OT SWAPPABLE
The following items are designed to be hot swappable to allow easy and quick replacement:
- Media converters
- Power supplies with fans
♦ A DEQUATE VENTILATION
- Provides one cooling fans on the left and right side
- Ventilation holes on each side
♦ P OWER REDUNDANCY & POWER ISOLATION
Two high quality internal power supplies provided for loadsharing purpose.
- Load sharing mechanism: If one power supply should fail, the redundant power supply is capable of taking over immediately
- Converter bay power isolation ensures each bay is electrically isolated from each other
♦ O VER CURRENT PROTECTION
- Fuses on PCB for each converter bay
- Fuse on each power supply
4 User’s Manual
Signamax
FO-065-1185 Media Converter Chassis System
Front Panel Display
F RONT P ANEL
The front panel of this Signamax
FO-065-1185 Media Converter
Chassis System shows it is capable of housing up to sixteen media converters in bay 1~16.
There is an array of LED indicators, which provides you with instant feedback on the status of each power.
Figure 2: Front Panel of the Signamax
FO-065-1185 Media Converter
Chassis System
U NDERSTANDING LED S
Power
Supply’s
Switch LED
Green
Off
Power switched on
Power switched off
Blown fuse
Power supply failed i
Before you use this table for troubleshooting, make sure the chassis system is properly conne cted to power and switched on.
User’s Manual 5
Signamax
FO-065-1185 Media Converter Chassis System
I n s t a l l a t i o n
Selecting a Site for the Equipment
As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements:
- The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius).
- The relative humidity should be less than 90 percent, non-condensing.
- Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2
(3V/M) field strength.
- Make sure that the equipment receives adequate ventilation.
Do not block the ventilation holes on each side of the switch or the fan exhaust port on the side or rear of the equipment.
- The power outlet should be within 1.8 meters of the switch.
6 User’s Manual
Signamax
FO-065-1185 Media Converter Chassis System
Deciding How to Install the System
We strongly suggest that you install the chassis first, as this is more convenient for you to install media converters into the chassis with ease. The accessories supplied in the product package includes: rackmount screws, rackmount brackets, and bracket screws.
This well-built chassis can be installed in the following ways:
M OUNTED TO 19INCH STANDARD RACK
Use the rackmount brackets and screws to install the chassis into any EIA 19” standard rack.
Step 1: Attach the brackets to each side of the chassis. Apply screws to each side and secure them tightly.
Step 2: Carefully position the chassis into the rack. Align the brackets to the side holes on the rack and use rack screws to secure the chassis with the rack.
Step 3: Proceed to the “Connecting to Power” section.
D ESKTOP OR ANY FLAT SURFACE
The chassis can sit on desktop or any flat surface with adequate space and ventilation. If you want to place it onto a shelf, make sure the shelf can withstand a minimum weight of 10kg.
Step 1: Simply put the chassis on the desired place.
Step 2: Ensure the chassis receives good ventilation.
Step 3: Proceed to the “Connecting to Power” section.
User’s Manual 7
Signamax
FO-065-1185 Media Converter Chassis System
Installing Media Converter
The chassis is equipped with media converter carriers, each of which is fitted into bays of the chassis.
Step 1: To install a media converter onto any of the carriers, you have to unscrew the carrier from the desired bay first.
Step 2: Fit the media converter onto the carrier.
Step 3: When the media converter is completely seated onto the carrier, insert the carrier to the guide rails of the bay slot.
Step 4: Carefully slide in the carrier until it is fully and firmly fitted to the power socket. Fasten the screws on the carrier. i. i
The chassis is designed to house only the proprietary media converters. ii. iii.
Never insert any media converter into the chas sis directly without using the supplied carriers. These carriers allow secure and consistent placement of the media converters into the chassis’ backplane without causing any damage.
For details, please refer to the User’s Manual for media converters.
8 User’s Manual
Signamax
FO-065-1185 Media Converter Chassis System
Connecting to Power
P OWER SUPPLY
The chassis ships with two power supplies. When the chassis is equipped with two power supplies, you can have the following advanced performance.
♦
Hot Swappable –
The design of the power system is based on an idea of providing maximum flexibility and redundancy. In this way, you may remove any of the two power supplies without turning off the system.
♦
Redundancy –
During operation, both power supplies are switched on and share the current load. In case that one of them should fail, the other will instantaneously take 100% of the load without any loss. Similarly, if one power supply is removed from servicing, it can be switched off and removed while the chassis continues functioning.
♦
Protection System –
The power of each converter bay comes from the two shared power supplies. Each bay is isolated from each other under a certain protection mechanism, so that it is free from any problem that might occur to the power supplies or faulty converter bay. This is the best solution to protect your investment in media converters.
C ONNECTING TO POWER
The chassis system is equipped with two power supplies.
Step 1: Connect the supplied AC power cord to the receptacle on the front panel of each power supply.
Step 2: Attach the plug into a standard AC outlet with a voltage range from
100~240Vac.
User’s Manual 9
Signamax
FO-065-1185 Media Converter Chassis System
Step 3: Turn on the chassis system by flipping the ON/OFF switch beside the receptacle to ON position. The LEDs on the front panel of the media converter chassis system will come on then.
Figure 3: The rear of the Signamax
FO-065-1185 Media Converter
Chassis System
10 User’s Manual
Signamax
FO-065-1185 Media Converter Chassis System
Cooling System
The chassis system can hold two power supplies and up to sixteen media converters, and therefore, it is necessary to provide a good cooling system and so to achieve obtain adequate ventilation.
The chassis is equipped with two hot-swappable power supplies with fans at the rear. The chassis is also equipped with one fan on the left and right side of the chassis.
Figure 4: The rear side of the Signamax
FO-065-1185 Media Converter
Chassis System
User’s Manual 11
Signamax
FO-065-1185 Media Converter Chassis System
S p e c i f i c a t i o n s
C HASSIS S YSTEM
Capacity
Power
Cooling
LED Indicators
Dimensions
Net Weight
Sixteen bays for housing up to sixteen media converters
Two power supplies provided, hotswappable
Two power supplies with fans
One fan on the left and right side of the chassis
2 LEDs (1 LED for each power supply’s power status)
W440 mm × D276 mm × H90 mm
Standard 19” size, 2 U
8.5kg approx. (Fully fitted with sixteen media converters)
P OWER S UPPLY
Power Input
Power Output
Load
Operating
Temperature
Storage
Temperature
Emissions
110~240Vac, 50~60Hz
12Vdc, 84W (x2) max.
7A (x2) max.
0°C to 40° C (32°F to 104°F)
-25°C to 70°C (-13°F to 158°F)
CE Class A, FCC part 15 Class A
12 User’s Manual
Signamax
FO-065-1185 Media Converter Chassis System
C o n t a c t I n f o r m a t i o n
SIGNAMAX
CONNECTIVITY SYSTEMS
An AESP Company
999 N.W. 159th Drive
Miami, Florida 33169, U.S.A.
Phone: 305-944-7710 Fax: 305-652-8489
Sales: 800-446-2377 Tech. Support: 800-446-2377, ext. 201
Http://www.signamax.com
E-mail: [email protected]
User’s Manual 13

Public link updated
The public link to your chat has been updated.
Advertisement