Miele’s new Little Giants for Small scale laundry operations Washer extractor PW 6055 and PW 6065 Tumble dryer PT 7135 C and PT 7136 Rotary ironer HM 16-80 and HM 16-83 The Miele laundry system: The compact solution The compact solution for hotels and healthcare: practically orientated, economical laundry care for the in-house laundry – fast throughput, optimum results and low costs. Washing MIELE’S LITTLE GIANTS, PW 6055 and PW 6065, are the ideal entry level machines for small, in-house laundries. Featuring a wide range of standard programmes they also offer a good selection of additional functions and programmes to suit a wide range of applications. These machines also benefit from Miele's unique patented Honeycomb drum with a sculptured surface. A thin film of water cushions the garments in the drum which reduces fibre breakage and pilling. After spinning laundry is easier to unload and because there is less stress caused to the load during washing you have the reassurance that your laundry will keep its shape and last longer. Tested and approved by the Water Regulation Advisory Scheme, these machines can be connected to mains water in any application, including category 5 high risk establishments e.g. nursing homes, in accordance with Water Supply (Water Fittings) Regulations 1999. 2 Drying The perfect complement to Miele's PW 6055 and PW 6065 washer-extractors are the 6.5 kg capacity tumble dryers with a range of highly developed drying programmes to ensure your laundry gets the best treatment possible. The reverse action drum ensures energy efficient drying with tangle-free results, and the electronic sensing system means an automatic process which eliminates operator guesswork. Ironing Miele’s compact HM 16-80 and HM 16-83 rotary ironers provide the perfect finishing touch for your in-house laundry. They can cope with up to 15 kg of flatwork per hour and because they take up very little space, can be sited against a wall where they are easy for one operator to use. Miele – Adding value! Miele can look back on decades of experience in developing washer-extractors and cleaning processes. The concepts and features of Miele’s professional up-to-theminute washer-extractors, tumble dryers and high throughput rotary ironers are based on this experience. The advantage to the customer is that every establishment can be given comprehensive advice and a thorough analysis of its operating and economic requirements. Even the installation of the machines can be planned down to the smallest detail, including drawings where required. Better know-how Miele offers technologically advanced products that are made in compliance with DIN EN ISO 9001. Solid construction, high quality materials, sophisticated technology and excellence of finish with electronic components that are designed and made in-house guarantee the legendary longevity of Miele machines. The reliability of all components and patented technologies are further examples of the optimising of Miele quality through technical innovation. “Forever better” – or “Immer besser” has been the cornerstone of Miele’s philosophy for over one hundred years. Miele was awarded the “Best practice” award 2002 for innovation, reliability and quality of product by the Institute for Productivity and Quality (IPQ). From start to finish, Miele is the professional partner for your laundry – perfect laundry care for satisfied customers. Easy access to Miele ensures prompt attention for all enquiries, while Miele’s network of sales and service centres guarantees fast assistance when help is needed. Special maintenance and service contracts ensure down-time is minimised and provides extra peace of mind. Better service Better quality 3 MIELE’S LITTLE GIANTS Washer-extractors The advantages of Miele’s Professional technology PW 6065 PLUS Quality build Miele machines are made with the highest quality materials and expert workmanship. All components, from the shock-absorbers on the drum cradle and the drum bearings to the outer casing and the very last nut and bolt in the machines, are quality tested to ensure many years of good service. Depending on model both the washerextractors and tumble dryers are available with either a high-grade stainless steel housing, or a high-quality vitreous direct enamel housing which is resistant to corrosion, yellowing and chipping. Spaceframe construction Many machines are awkward to service because opening them to access components is a lengthy process. With a MIELE LITTLE GIANT the front, sides and lid are easily removed by undoing a few screws, so all major working parts are easy for a service engineer to access. 4 Patented Honeycomb drum Miele's unique patented Honeycomb drum is made from high grade stainless steel. With a sculptured surface, a thin film of water cushions the garments in the drum to reduce fibre breakage and pilling. The specially designed drum ribs together with optimised drum rhythms help drench the laundry quickly so programme durations are shorter, water consumption levels are kept down and your laundry gets the best possible care. Large capacity drum with drum lighting The new drums have a maximum load capacity of 5.5 kg (PW 6055) or 6.5 kg (PW 6065) dry weight and are ideal for the efficient processing of large quantities of laundry. With a 30 cm wide door aperture, access for loading and unloading has been improved, and because the drum has integrated lighting there is no danger of leaving something behind when unloading it. Efficient professional motor The powerful asynchronous motor with its frequency-controlled drive system enables a gentle run-up to spin and high spin speeds of up to 1400 rpm to be achieved. A patented two-stage imbalance sensing system guarantees optimum laundry distribution during spinning, ensures maximum spinning performance and is a contributing factor to the legendary longevity of Miele machines. With a G-factor of 526, water extraction is very efficient and laundry can be dried quickly and efficiently in the matching tumble dryer afterwards. Individual solutions for individual requirements Up to 4 liquid detergent dispensing pumps can be connected to the machine for simple, precise and economical dispensing. The machines can also be connected to a payment system and are equipped with a serial interface for connection to a pc or printer. PROFITRONIC L controls New PROFITRONIC L electronic controls with multi-function selector and user navigation offer a wide range of standard programmes as well as a number of special ones for dealing with a wide range of fabrics and particular requirements e.g. Kitchen linen, Table linen, Curtains, Pillows, Outerwear and Proofing. With additional features such as programme delay and a time left display these machines enable the user to manage their time efficiently. Healthcare applications Dump valve drain versions feature two sluice and thermal disinfection programmes meeting Department of Health guidelines HSG (95) 18, and conform to the requirements of The Care Standard Act 2000. Installation friendly Where space is at a premium a Miele tumble dryer can be stacked on top of the washer-extractor using a special stacking kit. This option only requires 600 x 700 mm of floor space! Short programme durations Quick wash programmes enable fast processing times and efficient laundry turnaround. With this faster throughput more programmes can be run daily and you can maintain smaller stocks of laundry. 1 2 3 4 5 PROFITRONIC L 1–4 Short cut buttons (PLUS versions only) 5 Display 6 Start 7 Optical interface for PC 8 Multifunction dial for selecting and confirming features 9 Door button 6 7 8 9 5 MIELE’S LITTLE GIANTS Tumble dryers Large filter in the new dryers PT 7136 PLUS Patented Honeycomb drum The hexagonal pattern in the drum on the tumble dryers is convex, creating air pockets to gently catch and cushion the laundry as it tumbles to the bottom of the drum. This allows warm air to surround the laundry enabling more efficient drying. And with less friction between fabric and the drum, laundry comes out smoother and less creased, so finishing is easier too. Large area fluff filter The large surface area of fluff filter on the vented dryer is capable of collecting the fluff from up to 16 drying cycles (depending on the type of fabric being dried). 6 Vented or Condenser? MIELE'S LITTLE GIANT tumble dryers are available in both vented and condenser versions. The condenser tumble dryers also have a pump-away facility to drain the condensate through a waste pipe at the rear which can be connected to a sink, drain outlet, etc. So whatever the site conditions there's a dryer to suit! Winning combination MIELE'S LITTLE GIANT tumble dryers with their extremely short programme durations and large drum capacity enable large quantities of laundry to be processed quickly and efficiently. With short turnaround times you can reduce the amount of time spent processing laundry each day. Spaceframe construction Many machines are awkward to service because opening them to access components is a lengthy process. With a MIELE LITTLE GIANT the front, sides and lid are easily removed by undoing a few screws, so all major working parts are easy for a service engineer to access. Installation friendly Where space is at a premium the tumble dryer can be stacked on top of a Miele washer-extractor using a special stacking kit. (See illustration on page 5). This option only requires 600 x 700 mm of floor space! PROFITRONIC L controls New PROFITRONIC L electronic controls with multi-function selector and user navigation allow easy programme selection of a wide suite of programmes to cater for all your laundry needs. A large clear text display also shows useful information such as how long a programme has left to run, and a 24h delay start features enables the user to choose when they want to run a programme, facilitating efficient time management. 1 2 3 Timed drying or sensor drying An electronic moisture sensor constantly monitors the residual moisture level of the load in the sensor drying programmes ensuring that laundry is gently tumbled to the exact degree of dryness required. Where timed drying is preferred there is the choice of a cool air or hot air timed drying programme. 4 5 PROFITRONIC L 1–4 Short cut buttons (PLUS versions only) 5 Display 6 Start 7 Optical interface for PC 8 Multifunction dial for selecting and confirming features 9 Door button 6 7 8 9 7 MIELE’S NEW LITTLE GIANTS PW 6055 and PW 6065 washer-extractors Miele's compact washer-extractors with honeycomb drum are ideal for the small, professional in-house laundry – or the perfect additional machine for individual departments within a larger establishment. PW 6065 in stainless steel PW 6055 PLUS in white Washer-extractor PW 6055 and PW 6055 PLUS • Load capacity: 5.5 kg • Honeycomb drum, volume: 54 litres • Spin speed: 1400 rpm • g-Factor: 526, initial residual moisture 50% • Available with stainless steel lid and white front and sides Wash system • Flowmeter controlled water intake for optimum water usage • Scoop and ladle technology for rapid saturation of laundry • Gentle drum acceleration and imbalance monitoring for lower noise levels and better garment handling Optional extras • Pumps for liquid dispensing (kit required) • Plinths • Can be fitted with optional external payment system • Optional interface for PC connection • Serial interface RS 232 Dispensing system • Detergent drawer in front of machine • Pre-equipped with connection points for 4 external dispenser pumps Washer-extractor PW 6065 and PW 6065 PLUS • Load capacity: 6.5 kg • Honeycomb drum, volume: 59 litres • Spin speed: 1400 rpm • g-Factor: 526, initial residual moisture 50% • Available with stainless steel lid and white front and sides or with stainless steel lid, front and sides Controls • PROFITRONIC L controls • PLUS versions also benefit from Short cut buttons for simple programme selection • Door release button Features • 2 special heating elements • Hot and cold water connections • Drain pump (LP) or • Dump valve (AV) • Electric heating • Drum lighting Construction • Stainless steel suds container and patented honeycomb drum • All parts are coded for easy recycling at the end of their useful life • Easy to install, can be sited free-standing or in a stack with matching tumble dryer All other features are the same as on the PW 6055 / PW 6055 PLUS For technical data see page 12 & 13 8 MIELE’S NEW LITTLE GIANTS PT 7135 C and PT 7136 tumble dryers Miele's compact dryers with honeycomb drum are the perfect combination for the Little Giant washer-extractors. PT 7135 C in stainless steel PT 7136 PLUS in white PT 7135 C and PT 7135 C PLUS • Condenser dryer • Condenser drying system, condensate drained away via drain hose at rear of machine • Load capacity: 6.5 kg • Honeycomb drum, volume: 130 litres • Available with stainless steel lid and white front and sides or with stainless steel lid, front and sides Controls • PROFITRONIC L controls • PLUS versions also benefit from Short cut buttons for simple programme selection • Electric heating • Drum lighting Drying system • Condenser drying system, condensate drained away via drain hose at rear of machine • Sensitive drying system for precise monitoring of residual moisture levels Construction • Stainless steel patented honeycomb drum • All parts are coded for easy recycling at the end of their useful life • Easy to install, can be sited free-standing or in a stack with matching washerextractor Optional extras • Plinths • Can be fitted with optional external payment system • Optional interface for PC connection • Serial interface for RS 232 Tumble dryer PT 7136 and PT 7136 PLUS • Vented drying system • Load capacity: 6.5 kg • Honeycomb drum, volume: 130 litres • Large capacity filter • Available with stainless steel lid and white front and sides or with stainless steel lid, front and sides All other features are the same as on the PT 7135 C / PT 7135 C PLUS For technical data see page 12 & 13 9 The perfect finish with small, compact rotary ironers Rotary ironers create the perfect finishing touch to the in-house laundry: they are easy to use, and provide a high standard of finish to a wide range of flatwork. The two ironers featured here are both return feed models which require little space for installation and can be operated by one person. HM 16-83 Output figures according to DIN 11 902 Depending on the initial residual moisture and the type of ironer, an output of up to 15 kg/h can be achieved. Miele’s rotary ironers create an absolutely perfect finish for your linen without the use of starch. The output levels achieved in practice are on average 20–40% lower than the maximum output level. The actual output depends on the skill and experience of the operator, the type of laundry being handled, how it is pre-sorted, the condition of the rotary ironer and the standard of finish required. 10 HM 16-80 HM 16-80: HM 16-83: HM 16-80 and HM 16-83: Features • Roller diameter 160 mm • Roller length 830 mm • Electric heating • Water reservoir for steam finishing • Output up to 15 kg/h at 20% residual moisture Features • Roller diameter 160 mm • Roller length 830 mm • Electric heating – Output up to 15 kg/h at 20% residual moisture Safety features • Patented finger guard • Manual separation of heater plate from roller in event of a power cut • Temperature limiter Controls • Freely selectable temperatures • Freely selectable roller speed Construction • Folding frame for easy storage • Feed-in and return of laundry to the front – Can be installed against a wall • Aluminium heater plate • H x W x D: 960 x 985 x 380 mm • Polyester needle felt roller padding with ARAMID needle-felt cloth • Foot operated control bar • Chrome laundry rail Controls • Freely selectable temperatures • Freely selectable roller speed Installation • Simple installation with 13 A moulded plug Construction • Feed-in and return of laundry to the front – Can be installed against a wall • Aluminium heater plate • H x W x D: 960 x 1050 x 380 mm • Polyester needle felt roller padding with ARAMID needle-felt cloth • Foot operated control bar • Chrome laundry rail 11 MIELE’S NEW LITTLE GIANTS Washer-extractors PW 6055 and PW 6065 Model number PW 6055 PW 6065 Capacity (kg) 5.5 6.5 HONEYCOMB DRUM, volume (l) 54 59 Spin speed (max. rpm) 1400 1400 G-factor 526 526 Residual moisture (%) 50 50 PROFITRONIC L • • 24 h Delay Start feature • • Cold water, 1/2” with 3/4” threaded union • • Hot water, 1/2” with 3/4” threaded union • • Drain pump or dump valve DN 22 DN 22/DN 70 • • • • Dispenser for 4 x liquid agents (conversion kit required) • • Payment system • • External dimensions H/W/D (mm) 850/595/720 850/595/720 Weight (kg) 107 109 Suitable for stacking • • Controls Plumbing Electrical connection – see chart below Asynchronous motor with frequency converter Detergent dispenser 3 compartment dispenser drawer Optional extras Dimensions, weight External finish Front and sides white, lid stainless steel • • Front, sides and lid in stainless steel, Zermatt silver control panel – • Cold * Hot * Cold * Hot * 59 49 59 49 59 49 59 49 Programme durations in minutes (AV version) Cottons 60°C Programme durations in minutes (LP version) Cottons 60°C * Cold water 15°C, Hot water 70°C in accordance with EN 60 456 12 Versions available Mat No Model No 6573280 PW 6055 6573250 PW 6055 6573210 PW 6055 Voltage 230 V/1N/50 230 V/1N/50 400 V/2N/50 Amps 1 x 13 1 x 30 2 x 16 Drainage Drain pump Drain pump Drain pump Finish White White White 6785160 6785130 6785150 PW 6055 Plus 230 V/1N/50 PW 6055 Plus 230 V/1N/50 PW 6055 Plus 400 V/2N/50 1 x 13 1 x 30 2 x 16 Drain pump Drain pump Drain pump White White White 6529810 6529800 6573660 6573640 6529840 6529830 6573700 6574110 PW 6065 PW 6065 PW 6065 PW 6065 PW 6065 PW 6065 PW 6065 PW 6065 230 V/1N/50 400 V/2N/50 230 V/1N/50 400 V/2N/50 230 V/1N/50 400 V/2N/50 400 V/2N/50 230 V/1N/50 1 x 30 2 x 16 1 x 30 2 x 16 1 x 30 2 x 16 2 x 16 1 x 30 Drain pump Drain pump Dump valve Dump valve Drain pump Drain pump Dump valve Dump valve White White White White Stainless steel Stainless steel Stainless steel Stainless steel 6787910 6787900 6787880 6787870 PW 6065 Plus PW 6065 Plus PW 6065 Plus PW 6065 Plus 230 V/1N/50 400 V/2N/50 230 V/1N/50 400 V/2N/50 1 x 30 2 x 16 1 x 30 2 x 16 Drain pump Drain pump Dump valve Dump valve White White White White Programme chart Standard programmes PW 6055 PW 6065 PW 6065 Sluice • • • • • • • • • • Sluice High – * Sluice Low – * Cottons Hygiene 95°C • • Cottons Universal 40°C / 60°C • • Minimum Iron 30°C / 40°C / 60°C • • Delicates 30°C • • Denim 40°C • • Woollens 30°C • • Spin • • Drain • • Special programmes (selectable only via the Settings / Supervisor level menu) Kitchen linen 60°C • • • Table linen 40°C • • • Curtains 30°C • • • Pillows 60°C • • • Outerwear 40°C • • • Proofing 30°C • • • * N.B. The sluice programmes are available via the settings / supervisor level menu on this machine, but only if it is equipped with a Dump valve. They must not be used on Drain valve version machines! Programme chart Standard programmes PW 6055 Plus – – • • • • • • • • • • • • PW 6065 Plus * * • • • • • • • • • • • • PW 6065 Plus Sluice • • • • • • • • • • • • • • Sluice High Sluice Low Cottons Hygiene 70°C–95°C Cottons Universal Cold – 60°C Minimum Iron 30°C–60°C Delicates 30°C–60°C Quick wash Cold – 40°C Woollens Cold – 30°C Silks Cold – 30°C Shirts Cold – 60°C Denim Cold – 40°C Towelling 60°C–95°C Spin Drain Special programmes (selectable only via the Settings / Supervisor level menu) Kitchen linen 60°C–95°C • • • Table linen 30°C–60°C • • • Curtains Cold – 40°C • • • Pillows 40°C–95°C • • • Outerwear Cold – 40°C • • • Proofing 30°C–40°C • • • Hygiene • • • Thermal disinfection at 85°C • • • * N.B. The sluice programmes are available via the settings / supervisor level menu on this machine, but only if it is equipped with a Dump valve. They must not be used on Drain valve version machines! 13 MIELE’S NEW LITTLE GIANTS Tumble dryers PT 7135 C and PT 7136 Model number PT 7135 C PT 7136 Capacity (kg) 6.5 6.5 HONEYCOMB DRUM, volume (l) 130 130 Condenser dryer • – Vented dryer with air recycling system – • • • • • External dimensions H/W/D (mm) 850/595/700 850/595/700 Weight (kg) 58 56 Suitable for stacking • • Controls/programmes Programmable PROFITRONIC L controls Electrical connection – see chart below Optional extras Payment system Dimensions, weight External finish Front and sides white, lid stainless steel • • Front, sides and lid in stainless steel, Zermatt silver control panel • • Versions available Mat No Model No 6592600 PT 7135 C 98010293 PT 7135 C Plus 6592610 PT 7135 C 6555230 PT 7136 6555220 PT 7136 6785090 PT 7136 Plus 6785120 PT 7136 Plus 6785080 PT 7136 Plus 6555270 PT 7136 6555240 PT 7136 14 Voltage 230 V/1N/50 230 V/1N/50 230 V/1N/50 230 V/1N/50 400 V/3N/50 230 V/1N/50 230 V/1N/50 400 V/3N/50 230 V/1N/50 400 V/3N/50 Amps 1 x 13 1 x 13 1 x 13 1 x 30 3 x 16 1 x 30 1 x 13 3 x 16 1 x 30 3 x 16 Finish White White Stainless steel White White White White White Stainless steel Stainless steel Rotary ironers Model number HM 16-80 HM 16-83 Roller diameter (mm) 160 160 Roller length (mm) 830 830 Aluminium heater plate • • Cover: polyester-needle felt/Aramid needle felt cloth • • Heating, electric (EL) EL EL AC 220–240 V 50–60 Hz • • Heater rating [kW] 2.6–3.1 2.5–3.0 Total connected load [kW] 2.7–3.2 2.6–3.1 Fuse rating [A] 1x13 1x13 Electrical connection Output Roller speed (m/min) 2–4.5 2–4.5 Roller speed (rpm) 4–9 4–9 20% residual moisture (up to kg/h) 15 15 • • External dimensions H/W/D (mm) 960/985/380 960/1050/380 Height when folded 1052 – Width when folded 500 – Weight (kg) 39 38 Laundry return feed To the front Dimensions, weight Output figures according to DIN 11 902 The output levels achieved in practice are on average 20-40% lower than the maximum output level. The actual output depends on the skill and experience of the operator, the type of laundry being handled, how it is pre-sorted, the condition of the rotary ironer and the standard of finish required. Programme chart PT 7135 C, PT 7135 C Plus, PT 7136 C and PT 7136 C Plus Standard Settings Low temperature programmes option Cottons Extra dry; Normal +; Normal; Hand iron ; Yes Hand iron ; Machine iron Minimum Iron Normal +; Normal; Hand iron , Yes Denim Normal; Hand iron , No Shirts Normal; Hand iron , No Outerwear Normal; Hand iron , No Towelling Normal + No Woollens handcare No Smoothing No Proofing No Cool air Timed drying No Warm air Timed drying Yes 15 Miele Company Limited Fairacres Marcham Road Abingdon Oxon OX14 1TW Telephone: (01235) 554455 Telefax: (01235) 554477 Internet: www.miele-professional.co.uk E-mail: [email protected] Miele worldwide: AUSTRALIA Miele Australia Pty. Ltd. Box 381 Ferntree Gully, Melbourne, VIC 3156 Tel. +61(0)3/97 64 71 00 Telefax +61(0)3/97 64 71 29 AUSTRIA Miele Gesellschaft mbH. Zentrale Salzburg Mielestr. 1 5071 Wals/Salzburg Tel. +43(0)6 62/85 84-4 26 Telefax +43(0)6 62/85 84-419 BELGIUM N.V. Miele S.A. 1730 Mollem Industriezone Asse 5, Nr. 22.1 Hof te Bollebeeklaan 9 Tel. +32(0)2/451.14.11 Telefax +32(0)2/451.14.14 CANADA Miele Limited 55G East Beaver Creek Road Richmond Hill, Ontario L4B 1E5 Tel. +1(0)9 05/7 07-11 71 Telefax +1(0)9 05/7 07-01 77 CZECH REPUBLIC Miele spol. s.r.o. 61700 Brno, Hneˇvkovského 81B Tel. +420(0)5/4 35 53-1 11 Telefax +420(0)5/4 35 53-1 19 DENMARK Miele A/S 2600 Glostrup, Erhvervsvej 2 Tel. +45 43 27 11 00 Tel. Salg/Professional +45 43 27 15 00 Tel. Jylland +45 97 12 70 66 Telefax hovednr. +45 43 27 11 09 Telefax Salg/Professional +45 43 27 15 09 FINLAND Miele Oy 01200 Vantaa, Porttikaari 6 Tel. +358(0)9/87 59 70 Telefax +358(0)9/87 59 72 99 FRANCE Miele S.A.S. 93151-Le Blanc-Mesnil (Paris) 9 avenue Albert Einstein Tel. +33(0)1/49 39 34 35 Telefax +33(0)1/49 39 44 38 GERMANY Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Tel.: 0 180 220 21 21 (6 ct/min)* Fax: 0 180 111 20 30* *Only in Germany www.miele-professional.de [email protected] GREECE Miele Hellas GmbH 154 51 N. Psychiko-Athen Mesogion 257 Tel. national 01/10 6 79 44 44 international 00 30/2/10 6 79 44 44 Telefax 01/10 6 79 42 09 international 00 30/2/10 6 79 42 09 HUNGARY Miele Kft. Hungária krt. 179 - 187 1146 Budapest Tel. national 061/4 22-31 80 international 00361/4 22-31 80 Telefax +3(0)61/3 83 -93 04 HONG KONG Miele Hong Kong Ltd. AIA Plaza, Room 401, 4th Floor, 18 Hysan Avenue, Causeway Bay, Hong Kong Tel. +852/26101331 Fax +852/26101013 IRELAND Miele Ireland Ltd., Dublin 24 Broomhill Road Tallaght Tel. +353(0)1/461 07 10 Telefax +353(0)1/461 07-97 ITALY Miele Italia G. m. b. H. 39057 Eppan Umfahrungsstraße 27 Tel. +39 04 71/66 61 11 Telefax +39 04 71/66 63 34 JAPAN Miele Japan Corp. 150-0044 Tokyo, Shibuya-ku Maruyamacho 3-6, E Space Tower 11F Tel.: +81-3-57 84-0036 Fax: +81-3-57 84-0037 KOREA Miele Korea Limited Miele Haus, 607-10 Yeoksam-dong Gangnam-gu SEOUL 135-080 Tel. +82 2 3451 9343 Telefax +82 2 3451 9399 LUXEMBOURG Miele s.à r.l. 20, Rue Christophe Plantin 2339 Luxembourg Tel. +352/4 97 11-25 Telefax +352/4 97 11-39 MEXICO Miele S.A. de C.V. Av. Santa Fé 170 German Centre 0-4-2 Col. Lomas de Santa Fé 01210, México, D.F. Tel. +52/55/85 03 98 70 und +52/55/85 03 98 73 Telefax +52/55/85 03 98 74 NETHERLANDS Miele Nederland B.V. 4131 NR Vianen, De Limiet 2 Tel. +31(0)3 47/37 88 83 Telefax +31(0)3 47/37 84 29 NORWAY Miele AS Løxaveien 13 1351 Rud Tel. +47/67 17 31 00 Telefax +47/67 17 31 10 POLAND Miele Sp. z. o. o. 02-683 Warszawa Ul. Gotarda 9 Tel. +48/22/5 48 40 00 Telefax +48/22/5 48 40 10 PORTUGAL Miele Portuguesa, Lda. Av. do Forte, 5 2795-504 Carnaxide Tel. +351/21/42 48-100 Telefax +351/21/42 48-109 SWITZERLAND Miele AG 8957 Spreitenbach Limmatstr. 4 Tel. +41(0)56/4 17 20 00 Telefax +41(0)56/4 17-24 69 RUSSIA 000 Miele CIS 129164 Moskau Zubarev per., 15-1 Tel. +7/095/745 89 90 Telefax +7/095/745 86 80 TURKEY Miele Elektrikli Aletler Dıs¸. Tic. ve Paz. Ltd. S¸ti. Güvercin Sokak No. 10 80620 Levent-Istanbul Tel. +90/2 12/3 25 84 40 Telefax +90/2 12/3 25 84 49 SINGAPORE Miele Pte. Ltd. 163 Penang Road #04-02/03 Winsland House II Singapore 238463 Tel. +65/67 35 11 91 oder +65/65 62 88 95 Telefax +65/67 35 11 61 SLOVAKIA Miele spol. s. r. o. Plynàrenskà 1 82109 Bratislava Tel. +421/2/53 63 37 37 Telefax +421/2/53 63 37 46 SLOVENIA Werkkundendienststelle Miele d.o.o. Brodisce 15 1236 Trzin SOUTH AFRICA Miele SA (Pty) Ltd. 63 Peter Place Bryanston 2194 PO Box 69434 Bryanston 2021 Tel. +27(0)11/5 48-19 00 Telefax +27(0)11/5 48-19 35 UKRAINE TOV Miele Podil Plaza 30 A, Spasskaya St. 04070 Kiev UNITED ARAB EMIRATES Miele Appliances Ltd. Mankhool Road 1 Nashwan Building P.O. Box 11 47 82, DUBAI Tel. +971-4-39897-18 Telefax +971-4-39897-19 USA Miele, Inc. 9 Independence Way Princeton, NJ 08540 Tel. 001-800/843 72 31 Telefax 001-609/419 42 41 OTHER COUNTRIES: Sales International Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Tel.: +49(0)52 41-89 15 07 Fax: +49(0)52 41-89 15 00 SPAIN Miele S.A. 28108 Alcobendas (Madrid) Carretera de Fuencarral, 20 Tel. +34/91/6 23 20 00 Telefax +34/91/6 62 02 66 SWEDEN Miele AB Industrivägen 20 171 27 Solna Tel. +46(0)8/5 62 29-000 Telefax +46(0)8/5 62 29-209 Please do not hesitate to contact us if you require further information on these machines, or on any of our other products. The images, logos, names and trading marks used in this brochure to identify Miele, our products and services are our proprietary marks whether registered or unregistered. These may only be used with the express permission of Miele. Caring for the environment: this brochure is printed on paper bleached without the use of chlorine © Miele & Cie. KG, Gütersloh / M.-Nr. 6 621 712/GB M.-Nr. 98 024 500 / All rights reserved (XX-D) / BO 2844 – 08/06
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021