Pura QCRO4V-50 Specifications

Pura QCRO4V-50 Specifications
PRODUCT CATALOG
Water Conditioning Products
For the Plumbing Professional
Water Conditioning is a big opportunity
to improve your bottom line!
Turn opportunity into
Profit with a dealer
Program
offering REAL
Value!
Professional
Plumbers
Wanted!
TABLE OF CONTENTS
4 -11
About NOVO
12 - 19
Water Conditioning Basics
20 - 41
Water Softeners & Filters
sell to your existing customers who are installing new
plumbing, water heaters or water-using appliances.
Adding more revenue per call with little additional
cost means a better bottom line!
42- 53
Aqua Flo and Aqua Flo Platinum
Drinking Water Systems
The NOVO ProAdvantage™ Certified Dealer
Program makes Water Conditioning easier
than ever before:
54 - 70
PURA Ultraviolet Disinfection
Systems
71 - 85
Aqua Flo & Aqua Flo Platinum
Point-of-Use Filtration Products
86 - 104
Accessories
105
Marketing Materials
106 - 110
Glossary
O
H
H
H2O
Water Conditioning is a natural fit and an easy
0 1-800 Dealer Help Line
0 1-800 Consumer Help Line
0 Certified Dealer Training
0 Co-op Advertising Program
0 Advertising Materials
0 Showroom Displays
0 Sales Literature & Tools
0 Vehicle & Window Decals
0 Product Recommendation
0 Consumer Website
0 Dealer Website
0 Dealer Promotions
0 Dealer Apparel
0 Water Testing
0 Monthly NovoPro E-News
0 Dealer Advisory Council
Chemical Feed Pumps
Pro Chemicals
Test Kits
Mazzei Injectors
John Guest Fittings
0 Novo Field Sales Managers
Dedicated To Your Success!
Interested?
For more information visit:
www.novoproadvantage.com/
plumber-login.asp
26
Fe
iron
2
55.85
3
Welcome To NOVO
I first started in the water conditioning industry in 1968 with a focus
on growing and supporting the sale of water conditioning products
through the Plumbing Trade.
Today our mission is the same – to provide plumbers and our
wholesale partners with more value, features and support –
constantly raising the bar and surpassing expectations!
When it comes to residential & commercial water treatment no one
knows the industry better. Our Sales & Customer Service Team has
more direct experience than any in the industry allowing them to
offer you ‘best in class’ support.
We are committed to leading change bringing you modern designs,
new features, great performance and unparalleled quality.
Let us show you the difference Novo can make!
“We believe that investment in products,
a detailed focus on quality and
recognizing the value of our people is the
right foundation for the future”
Don Fettes, President
Don’t Let Your Customers
Spend Good Money For Bad Results…
Money Leaking Down The Drain?
Supporting Plumbing
Professionals
We understand that the plumbing trade is not always focused on
the changes occurring in the water treatment industry. That is why
we make sure that we provide all the important information the
trade requires to make profiting from water treatment easy:
0 Product & Application Training
0Commercial Expertise
0 Field Representation
0E-Newsletters
0 Sales Support Material
0Knowledgeable Customer
Service
0 Water Testing
Effective Sales & Product Training Program
Novo ‘hands on’ training programs provide you and your staff with
the knowledge needed to properly sell, apply,
size, install and service Novo equipment.
Industry Leaders in Customer
Service
Novo Field Representatives work with your local
plumbing wholesaler to provide you with the
best products and support in the industry!
Our Customer Service Team & Commercial Engineering Group has
over 250 Years combined Industry Experience.
The Industries Water Conditioning Experts are only ever a 1-800 call
away.
0 Order Placement
0 Troubleshooting
0 Specialized Commercial Engineering
A NovoClear 485 Whole-House Carbon Filter protects plumbing and your
customers from unwanted chlorine & chloramines.
A NovoSoft 485 High-Efficiency
Water Softener is an affordable solution!
0 Water Testing
0 Product Selection & Sizing
Chlorine is a strong oxidant that quickly destroys rubber seals & gaskets in
appliances and plumbing fixtures causing leaks. Chloramines attack pipes causing
pinhole leaks in plumbing.
Hard Water Damage
Hard water scale and curd will damage pipes, fixtures, water using
appliances, water heaters, clothing, dishes, hair & skin.
0 Expert Technical Support
Free Professional Marketing Tools
0 9”x 4” Quad-fold Novo Solutions Brochures
0 Protect Your Biggest Investment” In-Home -Sales Tools (Pipe Hangers & Brochure)
Dave Pitman
Commercial Engineering Manager
0 Counter Water Sample Test Kit Display
0 Laminated Softener Sizing Guides
0 Posters / Banners
…Fix The Water That Broke It!
Dean Dalrymple
Customer Service Manager
4
About Novo
About Novo
5
Water Testing Services
Operations & Product Development
Recommending a proper solution starts with a water
analysis. Novo labs in Regina, SK, Cambridge, ON, & Carmel, IN can
test your water samples for:
1) Hardness
2) Iron
3) Manganese
Toby Hughes has managed some of the industries largest water
conditioning manufacturing operations as well as toured the
facilities of most industry manufacturers across the globe.
Toby brings almost 20 years of extensive industry experience to
Novo. Toby has managed product development as well as implemented Lean manufacturing, Continuous Improvement and Quality
Assurance programs, MRP (Material Requirement Planning) systems
to create an efficient, low cost and quality driven manufacturing
environment.
4) pH
5) Tannins
6) TDS
Water
Analysis Report
Report
Water
Analysis
NOTE: Please answer ALL appropriate questions to ensure accurate equipment recommendations
FOR LABORATORY USE ONLY
Date Received ______________________
Report No. _________________________
Date Completed _____________________
CUSTOMER
DEALER
DISTRIBUTOR
_______________________________________
Name
_______________________________________
Name
_______________________________________
Name
_______________________________________
Street
_______________________________________
Street
_______________________________________
Street
_______________________________________
Town
State/Province
_______________________________________
Town
State/Province
_______________________________________
Town
State/Province
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Phone
Fax
_______________________________________
Phone
Fax
_______________________________________
Phone
Fax
Toby Hughes P. Eng.
Chief Operations Officer
Bacterial analysis must be performed by your local health department.
HOW TO DRAW WATER SAMPLE
Use outlet nearest pump (not from bottom of pressure tank).
Run water for five minutes or two pump cycles, then fill clean
bottle to neck and cap immediately. Never use hot water.
Return bottle with this completed form.
HOW TO MEASURE PUMPING RATE OF PUMP
1. Make certain no water is being drawn. Open spigot nearest
pressure tank. When pump starts, close tap and measure
time (in seconds) to refill pressure tank. This is cycle time.
2. Using a container of known volume, draw water and
measure volume in gallons until pump starts again. This is
drawdown.
3. Divide drawdown by cycle time and multiply the result by 60
to arrive at the pumping rate in gallons per minute. Insert
this figure in #3 Water System.
1. Water Source
o City or area-wide authority
o Community water system (small water system usually
supplying 12 homes or fewer)
Water comes from:
o Well o Lake o Reservoir o River o Unknown
o New private well - Approx age
months
o Old private well - Approx age
months
o Private lake o Private spring o Private dugout
o Private cistern o Other - describe
2. Household Information
Do you now have water conditioning equipment?
o No o Yes
Type
Size
o Single family o Multi-family No. of units ______________
No. persons
No. baths
o Lawn irrigation on water system?
o Indoor pool o Outdoor pool - Capacity
gallons
Water line size from source inches
3. Water System
Type of Pump
o Constant Pressure o Jet o Submersible o Unknown
Pumping rate of pump
gpm
Pressure Tank
o Air to water o Bladder Capacity
gallons
Operating pressure (low/high)
/
psi
4. Water Problems
When this sample was drawn, it was:
o Clear o Colored o Cloudy
This water sample is o Untreated o Treated
How is it treated?
PROBLEMS
o Hardness (e.g. high soap usage, bathtub ring, lime deposits,
etc.)
o Iron Deposits - if so, is iron build-up in flush tank?
o Greasy o Gritty o Stringy (iron bacteria?)
Color of Water - o Red o Orange o Black
o Greenish or blue stains on sinks, tubs, etc.
o Pitting of fixtures and/or pipes
o Sand (visible particles) o Sediment or silt (cloudy)
Bad Taste o Iron o Bitter o Salty
Other - describe
Bad Odor o Rotten Egg o Musty o Iron
Odor is in o Cold Water o Hot Water o Both
Other Problems - describe
8
Water Testing Kits & Sample Bottles
Novo sells a complete line of easy to use test
kits so you can accurately test water in the field.
Not sure of the proper product application?
Give us a call with the results and we’ll provide
you with a product recommendation.
Water Sample Collection Kits are available at
Stocking Wholesalers & include a sample bottle,
mailing tube and sample collection instructions.
“The Novo Product Development Center and manufacturing operations are beyond comparison in our industry. The investment in technology and commitment
to leading manufacturing practices & innovation has
resulted in higher quality and lower cost products with
meaningful ‘Installer / Service Driven’ features. This all
adds up to better value for our customers.
My staff of 17 Professional Engineers, including 3 PhD’s and 2 Masters,
are some of the brightest minds in the industry. I am excited to lead
Novo’s Global Engineering and Operations and raise the bar beyond
industry standards and our customers expectations.”
Toby Hughes, P.Eng., Chief Operations Officer
If you have concerns about the safety (potability) of
the water supply we recommend a complete water
analysis be conducted. These are usually conducted for
a small fee at a State or Provincial Lab.
6
About Novo
About Novo
7
Control Valves
NSF Certified chloramine
resistant rubber seals
Novo NSF/ANSI 44 Certified control valves meet or exceed the
most vigorous industry performance and reliability standards.
Familiar piston, seal and spacer design has been enhanced to
improve performance and product life.
The addition of a piston stabilizer reduces the side load force
between the piston rod and end plug seal as it firmly guides the
piston while it travels up and down. An added rib on the seal
improves the sealing pressure so that the valve can withstand
over 700psi! These are just a few of the design features that
make Novo valves more reliable and and better performing.
Learn more about the ‘Dealer-driven’ control valve design
features on page 13.
Novo NSF/ANSI 44 Certified control valves meet or exceed
competitive equivalents in all four key measures:
1) Service Flow Rate, 2) Back Wash Flow Rate, 3) Burst
Pressure and 4) Cycle Testing.
8
About Novo
Fiberglass Tanks
Novo NSF/ANSI 44 Certified filament wound tanks
are not only strong and reliable but the finish is unparalleled in the industry. No need for a tank jacket
(although we offer those too) with the neatly wound,
high gloss finish. Strict tank height control measures
mean no surprises when installing a duplex system.
Added Rib Improves Seal
The tanks are made in the World’s first and only fully
automated, robotic manufacturing process.
Watch the video >>
www.canaturena.com/tanks-video.asp
Piston Stabilizer
About Novo
9
Assembly, Testing & Distribution
All water softeners and whole-house filters are engineered,
assembled, tested and and distributed from our North
American Regional facilities. All control valves are 100% wet
tested and air tested before leaving the factory. Control valves
are then set up to engineering specifications for the particular
unit, air tested a second time and then assembled into the
finished product. All assembled products are packaged in
durable, double walled high impact cardboard to ensure
products arrive undamaged.
Quality Assurance Department
Novo employs a strict and formalized quality control program. The 925,000 sq. ft. Shanghai Manufacturing facility
is ISO9001:2008 Quality Assurance and ISO 14001:2004
Environmental Management Systems standards certified.
Quality Control systems:
0 Document Management
0 Receiving Inspection
0 In-process Quality Control
0 Final Inspection
Denton Gaiser, VP of Business Development setting up
valve on test rack in Cambridge. ON
0 Engineering Change Orders
0 First Piece & Production Part Approval
0 Test Equipment Calibration
0 Statistical Process Control
0 Vendor Quality Management
0 Customer Feedback System
Kyle Stange shrink wrapping shipment in Golden
Valley, MN
World Class Testing Laboratory
0 Burst Testing: High pressure testing of tanks and valves to determine the maximum burst strength.
0 Cycle Pressure Testing: High pressure cycling testing to simulate the fatigue
strength of the tanks and valves over their life.
0 Flow Bench: Precisely measure flow rates and pressure drops.
0 Reliability Testing: Continuously cycling the valve through regeneration while
taking flow measurements and counting the number of cycles.
0 Computer Aided Optical Comparator: Used for precise measurement of very small details such as fillets or radius’s.
Mike Cummings assembling a softener
in Regina, SK facility
0 Coordinate Measuring Machine (Cmm): Used for precise geometrical x, y, and z measurement coordinates.
0 3d Prototype Printer: Makes 3D models for rapid prototyping.
0 Chemical Analysis Laboratory:
Complete chemical analysis of raw
materials including metals, plastics and media to ensure quality and integrity.
10
About Novo
About Novo
11
The Hydrologic Cycle
Characteristics of Various Water Sources
Rain Water
After the water picks up impurities in the atmosphere
and percolates through the ground, it comes into
contact with carbon dioxide and then forms carbonic
acid. This dissolves some of the mineral content of the
soil or rock it contacts, thus adding these minerals to
the water.
Surface Water
Water from streams may be turbid due to the presence
of silt, clay, etc. However, in larger surface water, a
greater amount of self-purification takes place through
aerobic digestion, plant life, fish, etc. and the quality of
the water could change to a great degree.
Ground Water
Water
Conditioning
Basics
The Hydrologic Cycle
Guidelines for Solving
Water Problems,Terminology,
Water Analysis,
Sizing Parameters
12
The total area of the earth is composed of 2/3 water,
making it one of the most plentiful and most important
materials available. Without potable water, mankind
cannot survive.
Pure water consists of two parts hydrogen and one
part oxygen, chemically combined to form pure water.
The only pure source of water is the earth’s atmosphere (sometimes called the hydrological cycle).
Impure water from the earth’s oceans, lakes, rivers
and surface evaporates into the atmosphere, then
condenses to form rain droplets which are totally pure.
The above process operates basically the same as a
man-made still, which evaporates all the impurities
from the water, then returns the condensates into pure
water. If this process did not exist, there would likely
not be enough potable water to support the earth’s
population.
“The only pure
source of water
is the earth’s
atmosphere.”
The pure water vapor, which forms in the earth’s
atmosphere (clouds), begins to pick up impurities. As
it begins to fall to earth in the form of rain, snow, etc.,
impurities are immediately absorbed. These impurities
may be dust, micro-organisms, gases, etc. - at least a
little of everything found in the atmosphere on the way
to the surface.
The rain or snowfall finds its way to various sources of
water supplies on the earth’s lakes, rivers, oceans or
it may soak into the ground and become a part of an
underground stream or lake.
Normally picks up the minerals it flows through. As a
general rule, water from deep wells contains a higher
mineral content and is less likely to contain organics or
turbidity. Water from shallow wells is usually lower in
mineral content and may be subjected to pollution or
other bacteria which is available from various sources
nearby (e.g. spring run-off through forests and hills,
plants, industrial wastes, etc. which will all pass various
bacteria into the water).
Impurities
Impurities in water are divided into two classifications:
1. Dissolved Solids
Those which naturally dissolve into water. NOTE:
Gases may also dissolve into water unless they
combine chemically with other impurities. They will
be released into the atmosphere upon boiling and
are not truly classified as dissolved solids. Upon
evaporation, only the dissolved solids would remain
in the actual mineral form and then can be analyzed
by actual weight of the various elements.
2. Suspended Solids
Consist of clay, mud, silt, etc. and will not dissolve
into water naturally but remain as such in their
present state.
Water treatment and pollution control is one of the
largest and most important industries in the modern
day world. As can be seen from the preceding information, water treatment is a very broad and varied
field and chemical analysis of certain water supplies
is virtually impossible to completely break down. In
time, modern man may discover additional information
regarding the field of water treatment and the entire
cycle of the earth’s largest and most important single
resource.
The following sections will attempt to clarify some of
the more common problems and solutions presently
available.
13
CAUSE
CORRECTIVE EQUIPMENT
Hard Water
Spotting on dishes and glassware; scale
on inside of water heater, pipes and
water-using appliances; soap curd and
bathtub ring; clothes look gray and dingy.
Calcium and magnesium in
water, measuring 1.0 gpg
or more.
Water Softener
(Max. Hardness 100 gpg)
(Max. Clear Water Iron 1.5 ppm)
Yellow, brown or rusty stains on plumbing fixtures, water-using appliances and
fabrics; metallic taste in foods and beverages; water is clear when drawn from the
faucet but oxidizes when exposed to air,
then changes color ranging from yellow
to brown.
Iron in the water measuring
0.3 ppm or more.
0.3-1.5 ppm Water Softener.
1.5-7.5 ppm SIM Specialty System
Softener. 1.5-30 ppm Chemical Free
Iron Filter (Note 1).
Same symptoms as Clear Water Iron
but iron has already oxidized and has a
yellow to rust color when drawn from the
faucet.
Iron in the water measuring
0.3 ppm or more.
Same symptoms as Clear & Red Water
Iron but can have clumps or balls that
may foul plumbing lines and other
water-using appliances; particularly
noticeable as a yellow to reddish slime in
toilet flush tanks.
Clear Water Iron
(Ferrous)
Red Water Iron
(Ferric)
Bacterial Iron
Manganese
Acid Water
Aggressive/Corrosive
Water
Hydrogen Sulfide
pH
1/7000 of a pound - normally used in relation to
hardness.
pH is a measure of the intensity of the acidity or
alkalinity of water on a scale from 0 to 14, with 7 being
neutral. When acidity is increased, the hydrogen ion
concentration increases, resulting in a lower pH value.
Similarly, when alkalinity is increased, the hydrogen ion
concentration decreases, resulting in higher pH.
Parts per Million - ppm
One part dissolved material in one million parts of water. Used as a measurement for iron, manganese, TDS,
hydrogen sulfide, chlorides, sulfates and tannins.
Milligrams per Liter - mg/l
The pH value is an exponential function so that pH
10 is 10 times more alkaline than pH 9 and 100 times
more alkaline than pH 8. Similarly, a pH 4 is 100 times
more acid than pH 7.
0.3-30 ppm Chemical Free Iron
Filter ( Note 1).
0.3-10 ppm Iron & Sulfur Filter.
For our purpose, same as ppm. Normally used for a
more accurate measurement or where small quantities
of certain elements cause big problems in relation to
iron, manganese, sulfur, nitrates and silica.
Iron bacteria are a group of
bacteria which thrive in
ironbearing water, utilizing
iron as an energy source.
This bacteria is not a health
hazard.
Chemical Free Iron Filter
(Note 1). Chemical feed pump
feeding chlorine followed by a
Multimedia Filter (Note 3).
Converting gpg to ppm or mg/l
Extremely Alkaline
1 gpg = 17.1 ppm (mg/l)
Extremely Alkaline
Blackish stain on fixtures and laundry;
manganese content above 0.05 ppm
causes stains.
Interaction of carbon dioxide
or organic matter with manganesebearing soils. Usually
found in combination with
iron.
0.05-1.0 ppm Chemical Free M Iron
Filter (Note 1). 1.0-2.0 ppm Neutralizing Filter followed by Iron & Sulfur
Filter (Note 2).
Blue/green or rusty stains and corrosion
of plumbing fixtures and other water-using appliances; pitting of porcelain and
enamel fixtures and dishes. Pin holes in
copper plumbing lines.
Generally associated with
water with a pH value of less
than the neutral 7.0.
pH 6.0-6.9 Neutralizing Filter.
pH 4.0-6.9 Chemical Feed Pump
feeding soda ash. Consult our Customer Service Dept.
Same symptoms as Acid Water but pH is
7.0 or higher.
Alkalinity and carbon dioxide
or high dissolved oxygen in
water. Electrolysis - two dissimilar metals in plumbing
lines.
Consult our Customer Service Dept.
Hydrogen sulfide is a
dissolved gas found in some
water supplies.
0.1-3.0 ppm Chemical Free Iron
Filter or Iron & Sulfur Filter.
3.0-15 ppm Chemical Feed Pump
feeding chlorine followed by a
Multimedia Filter (Note 3).
Rotten egg taste and/or odor. Turns copper plumbing lines black. Very corrosive.
Marshy, metallic or
chlorine taste and/or
odors
Objectionable tastes and/or odors other
than hydrogen sulfide.
Dissolved minerals or gases;
organic contamination or
chlorination.
Activated Carbon Filter for whole
house water supply or Taste &
Odor Cartridge Filter for individual
faucets.
Turbidity (Sand/
Sediment)
Foreign particles, dirty or cloudy water.
Tiny suspended particles
that are the result of water
main scale or silt. Private
wells often contain sand or
clay.
Multimedia Filter for whole house
water supply or a Sediment Cartridge Filter for individual faucets.
Result of decaying vegetative matter.
Organic Color Removal Filter.
Consult our Customer Service Dept.
Tannins
Grains per Gallon - gpg
Yellow or brown tint or cast in water supply; tannins measuring 0.5 ppm or higher
may cause staining and/or interference
with various water treatment processes.
Total Dissolved Solids - TDS
The weight of solids, per unit volume of water, which
are in true solution. Can be determined by the evaporation of a measured volume of filtered water and
determination of the residue weight. A common
alternative method to determine TDS is to measure the
conductivity of water.
Hardness
A characteristic of natural water due to the
presence of dissolved calcium and magnesium.
Water hardness is responsible for most scale
formation in pipes and water heaters and forms
insoluble “curd” when it reacts with soaps.
Hardness is usually expressed in grains per gallon
(gpg), parts per million (ppm) or milligrams per
liter (mg/l), all as calcium carbonate equivalent.
pH Scale
Extremely Alkaline
Strongly Alkaline
Moderately Alkaline
Slightly Alkaline
Neutral
Slightly Acid
Moderately Acid
Strongly Acid
Extremely Acid
Extremely Acid
Excessively Acid
Very Extremely Acid
14.0
13.0
12.0
11.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Household Lye
Bleach
Ammonia
Milk of Magnesia
Borax
Baking Soda
Sea Water
Blood
Dislled Water
Milk
Corn
Boric Acid
Orange Juice
Vinegar
Lemon Juice
Baery Acid
INCREASING ALKALINITY
SYMPTOM
NEUTRAL
PROBLEM
Terminology
INCREASING ACIDITY
Guidelines for Solving Water
Problems
Note: A complete glossary can be found in the
Water Conditioning Glossary section.
Ferric Iron
Iron that is oxidized in water and is visible. Also called
red water iron.
Ferrous Iron
Iron that is dissolved in water. Also called clear water
iron.
Note 1 - Water must have a minimum pressure of 20 psi, pumping rate of 5 gpm and a pH of 6.5 or higher for proper operation. Most water
supplies contain calcium and magnesium which are not removed by an iron filter. We recommend following an iron filter with a water softener.
Note 2 - Oxidation of manganese is more pH dependent than iron. Therefore a pH of 8.2 or higher must be maintained. If the manganese level is
>2.0 ppm or bacterial iron is present, consult our Customer Service Department.
Note 3 - This system also requires a retention tank to allow adequate contact time (minimum 20 minutes). An optional activated carbon filter for
the whole house water supply or a taste & odor cartridge filter for individual faucets may be installed to remove any objectionable taste or odor.
14
15
Water Analysis
For correct sizing and application of water conditioning
equipment, a water analysis is required. A basic water
analysis includes tests for the following:
• Hardness
• Iron
• Manganese
• pH
• TDS (Total Dissolved Solids)
Water samples should be taken as near the source as
possible and represent the average water condition.
Clean containers must be used. When performing the
analysis, the test equipment must be clean and rinsed
with the test water and the test water should be
between 68°F and 77°F (20°C and 25°C). Use rubber
stops as supplied. Do not use your fingers as contaminants and acids could affect test results.
Additional tests can be performed for tannins and
hydrogen sulfide (H2S). The test for H2S must be performed on-site for accurate results. Special tests can be
performed for chlorides,
sulfates and alkalinity by specified laboratories. If it
is suspected the water supply is contaminated with
coliform bacteria or nitrates, a sample must be collected in an approved sterilized container and submitted to
a government approved laboratory. Iron bacteria will
not be detected with the standard iron test and can be
tested for by a government approved laboratory.
Hard Water
Water with a total hardness of 1.0 gpg or more as calcium carbonate equivalent.
Less than 1.0 gpg ............ Soft
1.0 - 3.5 gpg .................... Slightly hard
3.5 - 7.0 gpg .................... Moderately hard
7.0 - 10.5 gpg .................. Hard
More than 10.5 gpg ......... Very hard
NOTE: Please answer ALL appropriate questions to ensure accurate equipment recommendations
Report No. _________________________
Date Completed _____________________
DEALER
DISTRIBUTOR
_______________________________________
Name
_______________________________________
Name
_______________________________________
Name
A characteristic of natural water due to the presence of
dissolved calcium and magnesium. Water hardness is
responsible for most scale formation in pipes and water heaters and forms insoluble “curd” when it reacts
with soaps. Hardness is usually expressed in grains per
gallon (gpg), parts per million (ppm) or milligrams per
liter (mg/l) all as calcium carbonate equivalent.
_______________________________________
Street
_______________________________________
Street
_______________________________________
Street
_______________________________________
Town
State/Province
_______________________________________
Town
State/Province
_______________________________________
Town
State/Province
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Zip Code/P.C.
Email
_______________________________________
Zip Code/P.C.
Email
Soft Water
_______________________________________
Phone
Fax
_______________________________________
Phone
Fax
_______________________________________
Phone
Fax
Hardness
Any water which contains less than 1.0 gpg (17.1 mg/l)
of hardness minerals, expressed as calcium carbonate
equivalent.
Softened Water
Any water that is treated to reduce hardness minerals,
expressed as calcium carbonate equivalent.
If a contaminant exceeds the limits detectable by any
test method, the raw water sample can be diluted with
distilled water until a reading can be taken. A calculation must then be performed to determine the actual
degree of contamination. All test chemicals are subject
to age and extreme temperatures. Proper storage techniques and expiry dates should be observed.
O
H
26
Fe
iron
55.85
16
Date Received ______________________
CUSTOMER
If the TDS is over 1000 ppm and hardness is less than
30% of the TDS, a complete water analysis should be
performed to discover what other contaminants exist
in the water.
The Water Analysis Report shown on the next two
pages must be completed accurately to determine the
correct equipment to recommend for the water problem(s) being experienced.
Water
Analysis
Water
AnalysisReport
Report
FOR LABORATORY USE ONLY
H
H2O
Bacterial analysis must be performed by your local health department.
HOW TO DRAW WATER SAMPLE
Use outlet nearest pump (not from bottom of pressure tank).
Run water for five minutes or two pump cycles, then fill clean
bottle to neck and cap immediately. Never use hot water.
Return bottle with this completed form.
HOW TO MEASURE PUMPING RATE OF PUMP
1. Make certain no water is being drawn. Open spigot nearest
pressure tank. When pump starts, close tap and measure
time (in seconds) to refill pressure tank. This is cycle time.
2. Using a container of known volume, draw water and
measure volume in gallons until pump starts again. This is
drawdown.
3. Divide drawdown by cycle time and multiply the result by 60
to arrive at the pumping rate in gallons per minute. Insert
this figure in #3 Water System.
1. Water Source
o City or area-wide authority
o Community water system (small water system usually
supplying 12 homes or fewer)
Water comes from:
o Well o Lake o Reservoir o River o Unknown
o New private well - Approx age
months
o Old private well - Approx age
months
o Private lake o Private spring o Private dugout
o Private cistern o Other - describe
2. Household Information
Do you now have water conditioning equipment?
o No o Yes
Type
Size
o Single family o Multi-family No. of units ______________
No. persons
No. baths
o Lawn irrigation on water system?
o Indoor pool o Outdoor pool - Capacity
gallons
Water line size from source inches
8
3. Water System
Type of Pump
o Constant Pressure o Jet o Submersible o Unknown
Pumping rate of pump
gpm
Pressure Tank
o Air to water o Bladder Capacity
gallons
Operating pressure (low/high)
/
psi
4. Water Problems
When this sample was drawn, it was:
o Clear o Colored o Cloudy
This water sample is o Untreated o Treated
How is it treated?
PROBLEMS
o Hardness (e.g. high soap usage, bathtub ring, lime deposits,
etc.)
o Iron Deposits - if so, is iron build-up in flush tank?
o Greasy o Gritty o Stringy (iron bacteria?)
Color of Water - o Red o Orange o Black
o Greenish or blue stains on sinks, tubs, etc.
o Pitting of fixtures and/or pipes
o Sand (visible particles) o Sediment or silt (cloudy)
Bad Taste o Iron o Bitter o Salty
Other - describe
Bad Odor o Rotten Egg o Musty o Iron
Odor is in o Cold Water o Hot Water o Both
Other Problems - describe
17
5. Standard Laboratory Tests
Total Hardness
____________
Iron
____________
Manganese
____________
pH
____________
Total Dissolved Solids
____________
gpg
mg/l
mg/l
mg/l
6. Other Tests
Hydrogen Sulfide
____________ mg/l
(test must be performed on-site)
Tannins
____________ mg/l
7. Special Laboratory Tests
Chlorides
Sulfates
Alkalinity
____________ mg/l
____________ mg/l
____________ mg/l
If TDS is over 1000 ppm and hardness is less than
30% of the TDS, a total water analysis is required.
8. Explanation of Water Analysis
A. Total Hardness
This indicates the efficiency or workability of the water
for everyday household use. Water in excess of 3 gpg
is generally considered hard and should be softened.
B. Iron
Over 0.3 ppm of iron will cause discoloration of water
and staining. Fully automatic water conditioners will
correct this problem. Some extreme water situations
may require filtration.
C. Manganese
Manganese is frequently encountered in iron-bearing
water but to a lesser degree. Manganese is similar
to iron in that it stains and clogs pipes and valves.
Concentrations as low as 0.05 mg/l of manganese can
cause problems.
D. pH
A scale used to measure the acidity or alkalinity of
water. A pH reading below 6.5 normally indicates
highly corrosive water and neutralizing equipment
should be used. A pH reading in excess of 8.5 could
indicate contaminated water and generally requires
bacteriological and chemical analysis.
E. Hydrogen Sulfide (H S)
Testing for hydrogen sulfide should occur on-site.
Hydrogen sulfide imparts a rotten egg odor and taste
that makes water all but undrinkable and also promotes
corrosion. In addition, it can foul the resin bed of a
water conditioner. The use of a water conditioner is not
recommended unless the water is first treated for the
removal of hydrogen sulfide.
2
F. Total Dissolved Solids (TDS)
A measure of the soluble solids present in the water.
G. Tannins
Tannic acid is formed by decaying organic matter.
Tannins alone are not harmful, although they can
affect the proper operation of a chemical free iron filter.
H. Chlorides
Over 500 ppm may impart a salty taste to water.
I. Sulfates
Over 500 ppm may impart a bitter taste to water and
have a slight laxative effect.
J. Alkalinity
Caused by the presence of bicarbonates, carbonates
and hydroxides. Over 500 ppm creates a “soda” taste
and makes skin dry.
Sizing Parameters
Water Softener Sizing is Based On
0 60 gallons per person per day - total
household use
1. To determine the size of the water conditioner to be used
0 Capacity between regenerations at factory
salt settings or K label capacity
2. To allow for reserve capacity between regenerations so the customer does not run out of soft water
0 Number of people x 60 gallons per person x
gpg of hardness x 3 days = capacity required
between regenerations
3. To provide the most economical operation cost
0 Consult your factory representative for water
that is 75 gpg or harder
Water Softener/Iron Removal
Combination Units
0 This unit should be recommended only when
dictated by special circumstances or the needs
of the customer.
0 The customer should be made aware that a
separate iron filter and softener is preferred
because it is a more efficient way to deal with
the water.
0 When recommending a combination unit, follow
the guidelines provided in the specifications.
The volume of water used during the regeneration
process of a water softener will vary depending on:
0 Amount and type of resin
Recommendations are based entirely on the information supplied and the water sample chemistry results at the time
of analysis.
0 Cycle time settings
0 Flow controllers
0 Salt settings
0 Tank diameter
Recommended by ____________________________________
Generally, water usage for regeneration is based on the
cubic feet of resin per water softener from a low of 30
gallons of water per cubic foot, up to a normal of 75
gallons of water per cubic foot, to a maximum of 100
gallons of water per cubic foot. Manufacturing specs
and settings for each model size should be checked to
verify exact amounts.
Return completed form to:
The three day sizing method is used for the
following reasons:
0 Three day minimum between regenerations
Water Consumption for Regeneration
Recommendations
Three Day Sizing Method
Conversion Factors & Compensated Iron
& Manganese
Total Hardness converted from ppm or mg/l to
Grains/US Gallon (gpg)
ppm (mg/l) ÷ 17.1 = gpg
If there is a small amount of Iron or Manganese
in the water, add the following compensated values:
Iron - ppm x 4
Manganese - ppm x 8
To arrive at the additional compensated load on the
softener
The Total Equivalent Iron for the softener to remove
should not be greater than 1.5 ppm. Total Equivalent
Iron is calculated as follows:
Iron ppm + 2 x Manganese ppm < 1.5 ppm
If the Total Equivalent Iron is less than 0.5 ppm, a ResUp Feeder and Pro ResCare can be added as an optional safeguard against fouling or the bed can be cleaned
occasionally by adding a small amount to the brine
tank manually.
If the Total Equivalent Iron is 0.5 - 1.5 ppm, the
softener can be sized accordingly but a Res-Up Feeder
and Pro ResCare is required in addition to the softener
to prevent iron fouling of the resin.
If the Total Equivalent Iron is greater than 1.5 ppm,
an Iron Filter is required as pretreatment prior to the
softener.
Date _______________________________________________
9
18
19
Unique Features Designed with the
Plumber in Mind
Soft,
Clean
& Clear
Quick Connect Features for
Ultimate Convenience
The quick connect bypass comes installed on every unit with
both 90° 3/4 “ elbows and straight 1“ NPT connectors. Optional quick connect adaptors include 3/4 “ straight shark bite and
3/4” straight NPT connectors.
All units include pre-installed bypass
Softeners, Filters
& Specialty Systems
20
Standard QC Fittings
Optional Fittings
¾” FiP x ¾” Jg Flex Connector 18” (item # 80127757)
Simply push to connect on to any 3/4” copper, CPVC or PEX piping
with no tools!! Brought to you by a collaboration between Falcon
Stainless and John Guest USA. Eliminates the need for expensive
brass compression fittings or copper male adaptors.
Water Softeners & Filters
21
Space Saving Improved Design
Heavy Duty Packaging
Eliminate 4” and unnecessary connections for neat, quick installations. Bypass with integrated meter avoids ‘meter jamming’ which
is caused from weight of pipes creating torque on turbines causing
them to bind and stop metering.
Novo uses only durable double-walled high impact cardboard
with carrying straps to ensure you do not have to deal with the
headache of receiving damaged products.
“Our focus is to build the
highest quality water
conditioning products in the
industry… so when it comes
to protecting them from
damage during shipping &
handling we don’t ‘cheap
out’!”
Toby Hughes, P.Eng
Chief operations officer
5 inches
integrated meter in bypass
1 Connection Comes pre-installed
Competitive Valve
Water Softener Sizing Guide
QC Power Cable
0 Simplifies installation or removal
of the valve from the tank
0 No tangled or wrapped up
power cords!
High Quality Brine
Components
0 Closed bottom brine well reduced intrusion of unwanted impurities
0 Injection molded brine grids reduce bridging
0 Solvent free distributor tube with
spun weld collector avoids glue and solvents
0 Injection molded reliable brine valve
22
Water Softeners & Filters
9 inches
3 Connections
Choosing the Right Size Softener
# of
People
Total Hardness (Grains per Gallon)
10
15
20
25
30
40
50
60
70
75
1
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-100
NVO165-100
NVO485-100
NVO165-100
2
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-100
NVO485-100
NVO165-100
NVO485-100
NVO165-150
NVO485-150
NVO165-150
3
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-100
NVO165-100
NVO485-150
NVO165-150
NVO485-150
NVO165-150
NVO485-150
NVO165-200
NVO485-200
NVO165-200
4
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-100
NVO485-100
NVO165-100
NVO485-150
NVO165-150
NVO485-150
NVO165-200
NVO485-200
NVO165-200
NVO485-200
NVO165-300
NVO485-300
NVO165-300
5
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-100
NVO165-150
NVO485-150
NVO165-150
NVO485-150
NVO165-200
NVO485-200
NVO165-300
NVO485-300
NVO165-300
NVO485-300
NVO165-300
NVO485-300
NVO165-N/A
6
NVO485-75
NVO165-75
NVO485-75
NVO165-75
NVO485-100
NVO165-100
NVO485-150
NVO165-150
NVO485-150
NVO165-150
NVO485-200
NVO165-200
NVO485-300
NVO165-300
NVO485-300
NVO165-300
NVOHEDP-100
NVOHEDP-100
7
NVO485-75
NVO165-75
NVO485-75
NVO165-100
NVO485-100
NVO165-150
NVO485-150
NVO165-150
NVO485-150
NVO165-200
NVO485-200
NVO165-300
NVO485-300
NVO165-300
NVOHEDP-100
NVOHEDP-100
NVOHEDP-150
8
NVO485-75
NVO165-75
NVO485-100
NVO165-100
NVO485-150
NVO165-150
NVO485-150
NVO165-200
NVO485-200
NVO165-200
NVO485-300
NVO165-300
NVO485-300
NVO165-N/A
NVOHEDP-100
NVOHEDP-150
NVOHEDP-150
9
NVO485-75
NVO165-75
NVO485-100
NVO165-150
NVO485-150
NVO165-150
NVO485-200
NVO165-200
NVO485-200
NVO165-300
NVO485-300
NVO165-300
NVOHEDP-100
NVOHEDP-150
NVOHEDP-150
NVOHEDP-150
10
NVO485-75
NVO165-100
NVO485-150
NVO165-150
NVO485-150
NVO165-200
NVO485-200
NVO165-300
NVO485-300
NVO165-300
NVOHEDP-100
NVOHEDP-100
NVOHEDP-150
NVOHEDP-150
NVOHEDP-150
Notes:
We recommend contacting Novo Water Customer Service for any hardness levels above 75 gpg for proper recommendations
Cabinet models are available for all 75 and 100 models
Water Softeners & Filters
23
Water Softeners
High Performance Features:
Novosoft 485HE Series Water Softener
Reverse Flow Regeneration
with Precision Brining
0 Reverse Flow regeneration preserves unused portion of softening bed from unnecessary
exchange saving salt
Traditional ‘downflow’ softeners deplete the
unused portion of the resin bed with every
regeneration. It is like draining the gas tank in
your car every time before filling it up!
0 Precision Brining calculates the exact amount of brine required to regenerate saving up to 30% more salt
0 Automatic Backwash Frequency Preset for clean
municipal water saves water by matching back
wash to water quality need
E
0 Soft Water Brine Tank Refill keeps tank &
injectors clean
F
‘Reverse Flow Regen’ - drives
the hardness minerals up
through the already depleted
resin and out to drain - saving
both salt and the unused
portion of the resin for future
use.
0 Automatic System Refresh flushes stagnant
water after 7 days of non-use preventing
bacteria growth
0 Soft Water Recharge Mode ensures soft water during unusually heavy water usage
0 Compact two-piece cabinet or traditional
twin tank
uses up to
75% less salt
& 64% less
Water!!!
Soft Water Brine Tank Refill
- Conserve capacity and keep
brine tank cleaner by adding only
treated soft water to brine tank
rather than raw untreated hard
water.
Automatic System Refresh – If no water is used for
seven days, the system will perform an automatic
refresh preventing bacteria growth.
Automatic Backwash
Override - On clean
municipal water supply there is no need to
backwash and clean
the bed every regeneration. Save water
each regeneration
by skipping up to 10
backwash cycles.
Soft Water Recharge - If total
capacity goes below 3%, a short
15 minute ‘recharge’ will
restore additional capacity so
the softener can soften until the
regular 2:00 a.m. regeneration
time.
0 Condensation tank jacket (8”, 9” & 10” twin tank
models)
0 NSF Certified fibreglass pressure tank
0 WQA Gold Seal Certified cation resin
Estimated Annual Back Wash
Water Usage
3,000
2,500
2,000
Gallons
Features:
Novo’s premier high-efficiency softener sets
the new standard for high performance while
offering more features designed to make
installations faster & easier than ever!
Precision Brining - saves
additional salt by pre-making
only 70% of the brine. Just
before regeneration, the
computer calculates the precise
amount of brine top-up needed
to regenerate only the depleted
resin saving up to 30% more salt!
SAVES UP TO
2000 GALLONS
1,500
1,000
500
0
1 CF Mechanical Softener
WG185HE
0 WQA Tested & Certified against CSA B483.1
Twin tank model
0 User-friendly backlit LCD display
0 “No Touch” information display rotates key info like last regeneration date and volume remaining
0 Unique bypass with integrated turbine meter saves space, eliminates connections and is more durable
Ultimate Salt & Water Savings!
Use 75% Less Salt & 64% Less Water! It’s good for you & good for the environment!
0 Plastic salt grid prevents bridging (twin
tank only)
0 48 hour self charging battery back-up
7
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
LIFETIME
0 Includes hose clamp and 10’ of drain tubing
8,000
1400
7,000
1200
6,000
1000
Lbs
0 Brine safety valve for added overflow protection
1600
800
600
4,000
3,000
200
1,000
WARRANTY
Salt Usage
0
1 CF
Mech.
Meter
(15 lbs)
1 CF
Mech.
Meter
(10 lbs)
1 CF
Mech.
Meter
(6 lbs)
485 HE 100
1369
973
701
553
347
$250.00
$200.00
$150.00
$100.00
2,000
1CF
Mech.
Time
Clock
(15 lbs)
$300.00
5,000
400
0
Estimated Annual Operating
Cost (Salt + Water)
6 8 % S avin gs
WQA Tested & Certified to
NSF/ANSI 44 for effective
reduction of hardness as
verified and substantiated
by test data.
Estimated Regeneration Water
Used Per Year
7 5 % S avin gs
0 Drain line o-ring eliminates the need for Teflon
Salt Used Per Year
6 4 % S avin gs
0 Time saving quick connect fittings on bypass, drain & brine line. Power cord even has quick connect for easier installations.
Gallons
Cabinet model
Water Usage
$50.00
$
1 CF
Mech.
Time
Clock
(15 lbs)
1 CF
Mech.
Meter
(15 lbs)
1 CF
Mech.
Meter
(10 lbs)
1 CF
Mech.
Meter
(6 lbs)
485 HE 100
6,844
4,867
5,256
6,916
2,469
Operating Cost
1 CF
Mech.
Time
Clock
(15 lbs)
1 CF
Mech.
Meter
(15 lbs)
1 CF
Mech.
Meter
(10 lbs)
1 CF
Mech.
Meter
(6 lbs)
485 HE 100
$280.14
$199.21
$169.92
6,916
$91.06
Lifetime Warranty
Pressure tank
Two piece cabinet design
24
Water Softeners & Filters
Water Softeners & Filters
25
485 Water Softener Specifications
EconoFlo Series Water Softener
The economical and reliable EconoFlo Series Water
Softener offers simple electronics for the same price
as mechanical metered units. Offer your customers
more for less. Manually index cycle position for easier,
faster installation and service.
All Systems Include:
g NSF Certified pressure tank
g NSF Certified control valve
Uses 50% Less Salt
28% Less Water*
g WQA Gold Seal Certified cation resin
g 48 hour self charging battery back-up
g Pre-installed bypass
g Injection molded brine grids (twin tanks only)
Aquafine
¾” and 1” connections
Simpler than
setting your
alarm clock!
5
5 YEAR
WARRANTY
10
10 YEAR
WARRANTY
5 Year Warranty 10 Year Warranty
Control Valve
Pressure tank
*Compared to conventional calendar clock models
Model
Number
Item
Number
EFC20
2117
EFC30
2118
EFT20
2119
EFT30
2120
EFT40
2121
EFT60
2122
EFT90
2123
Regeneration Type
Plumbing Connections
Resin Type
Electrical Requirements
Water Temperature
Water Pressure
26
Water Softeners & Filters
Capacity - Grains
Flow Rate
@ 10 lbs/ @ 6 lbs/cu ft @ 3 lbs/
cu ft
Factory Setting
cu ft
Service
USGPM
16,500
22,000
16,500
22,000
27,500
44,000
66,000
8
10
8
10
12
13
15
19,875
26,500
19,875
26,500
33,125
53,000
79,500
10,500
14,000
10,500
14,000
17,500
28,000
42,000
Mineral
Total
Cabinet or Brine
Backwash Tank Size Resin (cu. Tank Size Inches
ft.)
(WXDXH)
USGPM (Inches)
2
9X35
0.75
13.8 X 23.6 X 34.5
2.4
10X35
1
13.8 X 23.6 X 34.5
2
9X35
0.75
16.6X 16.7 X 61
2.4
10X35
1
16.6X 16.7 X 61
2.4
10X47
1.25
16.6X 16.7 X 61
3.5
12X52
2
18.9 X 18.9 X65.6
5
14X65
3
24.6 X 24.6 X 84
Co current / Down Flow
Includes 3/4” 90°Elbows & 1” Straight NPT
Aquafine 8% High Capacity Ion Exchange Resin
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
Salt
Shipping
Capacity Weight
(lbs)
(lbs)
225
225
230
230
230
270
700
Water Softeners & Filters
93
110
93
110
141
158
244
27
Water Softeners
Eco-Friendly Efficiency
Compact Design
Traditional
Softeners
Traditional
Softeners
60 - 100 Gallon
6 - 15 Lbs
Super compact design is perfect
for main floor laundry or where
space is at a premium!
EcoSmart Series Water Softener
43”
35”
26”
1.5 Lbs
1.69$
9.6
Gallon
13”
18”
ECS-20
Water Usage
Per Regeneration
Annual Cost
of Electricity
Salt Usage
Per Regeneration
Quality & Warranty
EcoSmart™ Water Softeners are built to last! All
softeners are third party certified to meet the
industry’s most exacting standards and backed by
one of the industries strongest warranties:
ECS-20
#15010410
ECS-24
#15010411
ECS-34/39
#15010412 (ECS-34)
#15010414 (ECS-39)
• Seven Year System Warranty
• Lifetime Pressure Tank & Cabinet
Warranty
7
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
0 Compact design for small spaces
0 Uses over 75% less salt & water than
conventional water softeners
0 EcoSmart™ Intelligent electronic control:
• Simple intuitive electronics. No confusing
codes or symbols!
• Rotating performance information display!
• Adjustable cycles for peak efficiency!
28
Water Softeners & Filters
ECS-24
13”
18”
ECS-34/39
Easy Installation
Complete installation kit including bypass,
plumbing fittings & drain tubing. Quick connect
fittings for simple installation. Includes easy to
follow installation guide.
0 3/4” 90 degree elbows & 1” straight NPT quick
connect adapators
LIFETIME
WARRANTY
Lifetime Warranty
Pressure tank
EcoSmart™ control valve &
pressure tanks are NSF
Certified
Features:
0 Engineered for ultimate efficiency on clean
municipal water applications
18”
13”
0 High-efficiency fine mesh cation resin
0 Quality injection & blow molded cabinet
0 Push release hinged salt lid for easy salt refill
0 Brine safety valve provides additional overflow
protection
0 ECS-34 model not only softens but also filters
out bad tastes & odors caused by chlorine &
organics
0 Removes up to 10 ppm ferrous iron
WQA Tested & Certified to
NSF/ANSI 44 for effective
reduction of hardness as
verified and substantiated
by test data.
Water Softeners & Filters
29
Shower Softener
Whole-House Automatic
Water Filters
Just want soft water for your shower? This compact waterproof shower unit requires no electricity. The one-step
manual regeneration is easy to operate. Small portable
design makes it perfect for non-winterized cottages.
Protect Your Plumbing From Bad Taste and Odor
Caused by Chlorine and Other Chemicals.
Remove Disinfectants From Your Water
Once water arrives safely at your home there is no further
need for disinfectants. In fact they are undesirable!
0 Taste and bad odor
0 Dry skin
0 Damage plumbing
0 Can produce potentially harmful by-products
Leaky Faucet or Toilet?
Chlorine is a strong oxidant that quickly destroys plastic
& rubber seals & gaskets in appliances & plumbing
causing leaks.
Pin Hole Leaks in Pipes!
Chloramines are corrosive by nature and will eventually cause
costly damage to plumbing – causing pitting & pin hole leaks.
Features:
0 Easy installation
0 No electricity required
0 Waterproof slide cover
0 One step regeneration process
30
Water Softeners & Filters
Water Softeners & Filters
31
NovoClear 485HE Series Water
Filters
Filter Specifications
Problem water is no problem with our full line of NovoClear 485 Water Filters. Eliminate iron, sediment,
bad tastes, stains and odors, as well as, color caused by
organics. The high-efficiency control valve
monitors water usage and flushes the system automatically, readying it for operation again.
0 Taste & Odor Filters: Chlorine and organic matter can
make your water smell and taste terrible. The Novo
Clear 485 Taste & Odor filter uses high-quality
granular activated carbon to absorb the problem causing substances.
0 Chloramine removal Filters: Chloramines are now commonly used to disinfect municipal water supplies causing taste & odor problems. To remove
chloramines a special catalytically enhanced carbon is required.
0 Multi Media Filters: Cloudy water means you likely have suspended silt: or sediment. Restore your water
to crystal clear as the NovoClear 485 Multi-Media filter traps particulate matter as small as 20 microns.
0 Nexsand Turbidity Filters: Remove suspended solids,
Ferric Hydroxide (Red Water Iron) or Sediment from your well or water system down to 5 Microns.
Nexsand has proven extremely effective and will
double the service flow of Multi Media or Sand Filters.
0 Neutralizing Filters: The NovoClear 485 Neutralizing
filters raise the pH of acidic water to neutralize
corrosiveness protecting fixtures, pipes and
appliances.
0 Iron & Sulfur Filters: Water comes in contact with manganese greensand causing oxidization into solids which can be trapped in the filter bed
Chloramine (CLA) Units
use Two Tank System for
effective reduction of
chloramines
7
LIFETIME
WARRANTY
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
Lifetime Warranty
Pressure tank
Features:
0 Exclusive NSF Certified control valve with reliable
electronic sensors, adjustable cycle time and
proven piston, seal & spacer design
0 NSF Certified fibreglass pressure tank
0 Tank jackets reduce condensation. Standard on 8”, 9” & 10” tanks
0Unique, compact one piece bypass with integrated turbine meter
0 Time saving quick connect fittings on bypass, drain & brine line. Even the power cord has quick
connects
0 Drain line o-ring. No need for Teflon
0 User-friendly backlit LCD display
0 Audible Cycle Advance Alarm
0 Simple set up and programming with no confusing codes or symbols to remember
0 48 hour self charging battery back-up
0 Automatic Vacation Mode prevents media
cementing
0 “No Touch” LCD information display rotates key info like last regeneration date, current flow rate & peak flow rate
32
Water Softeners & Filters
0 Meter Immediate, Meter Delayed, and Meter with Day Over ride
0 Includes hose clamp and 10’ of drain tubing
Water Softeners & Filters
33
NovoClear 465HE BIF Chemical Free
iron Filter
Features:
0 Natural oxidation removes iron, manganese and sulphur
without chemicals, air pumps or a venturi
0 Low maintenance two tank system
0 Regenerates less frequently than traditional iron filters using up to 50% less water than manganese greensand filters
0 NSF Certified electronic control valve
0 NSF Certified fibreglass pressure tanks
0 Meter Immediate, Meter Delayed, Meter with Day Override, Vacation and Calendar Clock mode
0 Adjustable cycle times
0 Unique bypass with an integrated space saving turbine
meter and sample port on the inlet. One-piece design avoids meter jamming
Novo NRV (Non-Regenerating
Valve) Whole House Carbon Filter
Economical Reduction of Chlorine, Chloramines and
other Bad Taste & Odors.
Features:
0 Economical whole-house carbon filtration solution for reducing chlorine
(TO models), HS2 reduction in warm climates (TOK models) and other bad tastes and odors
0 Factory installed one-piece bypass with incorporated meter
0 Time saving quick connect fittings (90° ¾” NPT Elbows and 1” Straight NPT) included for faster, easier installation. Optional quick connect SharkBite® fittings also available.
0 Five year warranty on Distribution Head
0 Ten Year Warranty on NSF Certified tank
5
10
5 YEAR
WARRANTY
10 YEAR
WARRANTY
5 Year Warranty
Distribution Head
10 year Warranty
NSF Certified Tank
0 Time saving quick connect fittings on bypass
Uses up to
50% less
water!
0 Quick connect drain line o-ring eliminates need for Teflon
0 Power cord even has quick connect for easy valve
spin on
0 Hose clamp and 10’ of drain tubing included
7
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
Economical non-backwashing distribution
head with convenient
quick connect fittings
LIFETIME
WARRANTY
Lifetime Warranty
Pressure tank
*MN Models for low pH and/or high manganese applications
¾” and 1” connections
34
Water Softeners & Filters
Water Softeners & Filters
35
Specialty Systems
SIM Series
Specifications
Soften & Filter Problems From Your Water
Many ground water supplies often have multiple problems that are
not only an issue from an aesthetic standpoint but in terms of cost
when pipes become clogged, fixtures stained and laundry discolored.
SIM /ST
Series
Combination units provide one solution for multiple problems saving you space and money
NovoClear 485 HE Series Specialty
Combination Systems
Aquafine
Novo offers a variety of specialty systems to fix a variety of
water problems commonly found in combination in one water
supply.
SIMTAN Series
Specifications
24.0 lbs
Types of Specialty Systems:
SIM Series
Softener, Iron and Manganese Combination Removal
ST Series
Softener, Tannin and Color Combination Removal
SIMTAN Series
Softener, Iron, Manganese & Tannin Removal
7
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
LIFETIME
WARRANTY
Lifetime Warranty
Pressure tank
SIMTAN
Series
Aquafine
ST Series
Specifications
All systems include
Easy Feeder plus 64 oz
bottle of Res Care.
Aquafine
¾” and 1” connections
36
Water Softeners & Filters
Water Softeners & Filters
37
novo tan series tannin removal
Novoclear 485 hto hardness,
taste & odor removal
This system uses Anion exchange resin to remove color
caused by organic decay - greatly improving aesthetics
and preventing costly staining.
Rid your water of hardness & bad tastes and odor
caused by chlorine, chloramines or organic matter.
Features:
The unique two tank system keeps the two media beds
separate and allows for more carbon contact improving
chlorine, chloramines and organic removal.
Because the carbon may need to be replaced before the
softening resin, the two tank system allows for replacement without having to change the resin bed unlike
many traditional mixed bed systems. Same benefit as
separate systems but with cost of only one control valve.
0 Dedicated softening & carbon filtration tanks provide truly refined water
0 NSF Certified control valve with electronic sensors,
adjustable cycles & proven piston, seal & spacer design
0 Reverse Flow regeneration preserves unused portion
of softening bed from unnecessary exchange saving salt
0 Precision brining calculates the exact amount of brine required to regenerate saving up to 30% more salt
0 Backwash Frequency Preset for clean municipal water saves water by matching backwash to water quality need
0 Soft Water brine tank refill keeps tank & injectors clean
WQA Tested & Certified to
NSF/ANSI 44 for effective
reduction of hardness as
verified and substantiated
by test data.
0 Automatic system refresh flushes stagnant water
0 NSF Certified fibreglass pressure tank
0 WQA Gold Seal Certified cation resin
0 User-friendly backlit LCD display
0 “No Touch” rotating information display
7
7 YEAR
WARRANTY
7 Year Warranty
Control Valve
LIFETIME
WARRANTY
Lifetime Warranty
Pressure tank
0 Unique bypass with integrated turbine meter saves space, eliminates connections
0 Time saving quick connect fittings on bypass, drain line, brine line & power cord
0 Drain line o-ring. No need for Teflon
0 Brine safety valve provides added overflow protection
0 Plastic salt grid prevents bridging
0 48 hour self charging battery back-up
0 Includes hose clamp & 10’ of drain tubing
¾” and 1” connections
* CALL CUSTOMER SERVICE TO DETERMINE CORRECT MODEL. WATER TEST RESULTS REQUIRED
¾” or 1”
Aquafine
38
Water Softeners & Filters
Water Softeners & Filters
39
Novo 485 HEDP Dual Pass
Softening System
Novo 485 NeutraSoft Two Tank
Water Conditioning System
On very hard water supplies (> 75 gpg), a common problem
with single tank water softeners is the occurrence of hardness
leakage or ‘slippage’ as the extreme hardness will find a channel through the resin bed.
Neutralize Corrosiveness & Remove
Hardness to Protect Fixtures, Pipes &
Appliances
The Novo High-Efficiency Dual Pass (HEDP) Water Softener
uses a two tank system to prevent this problem. The first tank
acts as the workhorse by significantly reducing the water hardness. The second tank acts as a ‘polisher’ and prevents slippage as the overpowering high hardness condition has been
significantly reduced. This also increases the contact time with
the softening resin meaning more consistent, softer water.
Acidic waters on contact slowly dissolve the Calcite media
contained in the first tank to raise the pH which reduces the
potential leaching of copper, lead and other metals typically
found in plumbing systems.
As the Calcite neutralizes the water, it will increase the hardness of the water. The second tank contains cation exchange
resin to remove the hardness leaving you with pH balanced,
luxuriously soft water.
Salt efficiency is even more important on high hardness situations. The Novo HEDP offers salt-efficient reverse flow regeneration with precision brining for ultimate salt savings.
Features:
0 Economical two tank system is operated using one control valve. Simplifies installation and lowers cost.
Features:
0 Two tank system provides softer, more
consistent water quality and prevents hardness slippage which can occur in single tank systems
0 Perfect for high hardness (typically > 75 gpg)
residential and light commercial applications such as boiler feed systems
0 More cost effective than larger single tank systems
0 Reverse Flow Regeneration preserves
unused portion of softening bed from
unnecessary exchange saving salt
0 Precision Brining calculates the exact amount of brine required to regenerate
saving up to 30% more salt
0 Backwash Frequency Preset for clean municipal water saves water by matching backwash to water quality need
0 Soft Water Brine Tank Refill keeps tank & injectors clean
0 Automatic Vacation Mode flushes stagnant water
0 Dome hole neutralizing tank allows for easy replenishment of consumable calcite media
0 Exclusive Novo 485 Series control valve with reliable
electronic sensors, piston, seals and spacer technology
0 High-efficiency upflow regeneration for ultimate salt
savings and softer water
0 Time saving quick connect fittings for faster, easier
installation
0 48 hour self charging battery back-up keeps time-of-day stored while program settings are kept in permanent memory
0 Large user friendly color display shows time of day, total remaining capacity, and flow
indication
0 Factory installed one-piece bypass with incorporated
meter
0 Simple electronics and programming.
0 Fully adjustable cycle times
0 Seven year warranty on NSF Certified control valve
0 Meter Immediate, Meter Delayed, Meter with Day
Override
0 Lifetime Warranty on NSF Certified tank
0 Integrated turbine meter
Dome hole port on
tank allows for easy
replenishment of
Calcite neutralizing
media
Reverse flow regeneration
saves salt by pushing the
hardness minerals up & out
to drain instead of down
through the sodium-charged
portion of the softener bed
needlessly depleting it.
40
Water Softeners & Filters
Aquafine
¾” or 1”
Aquafine
Water Softeners & Filters
41
Aqua Flo Platinum QCRO & QCUF
Drinking Water Systems
Customized Drinking Water
Water conditions can vary even in the same community.
The Aqua Flo Platinum QCRO System can be configured
to meet your specific requirements. There are ten interchangeable filters with a variety of treatment options
that can be tailored to local water conditions, so your
water is the best it can be.
Better,
Safer
Drinking
Water
PLATINUM
If you’re concerned about RO reject water or RO
drain line makes installation difficult, we offer
UltraFiltration (UF).* The UF does not have a drain
line to run, your cost is lesser than RO and there is
no waste.
The innovative QC twist and lock design makes service
simple. Twist off the old cartridge and twist on the new.
No messy sump removal. Aqua Flo Platinum HP systems
make drinking water better and life easier.
* Check with water treatment specialist to recommend you an RO or UF
system depending on your untreated water quality.
“The innovative
QC twist and lock
design makes
service simple.
PLATINUM
”
Reverse Osmosis
Ultra Filtration
Under Sink Filtration
Designer Faucets
& Accessories
42
Drinking Water
43
Filter Cartridge and Single Stage Standalone System Specifications
A
B
C
D
* May vary depending on water quality
Quick glance on how Aqua Flo Platinum QCRO and QCUF works on water
A Sediment Filters. Screens out sediments and particles.
B Carbon Filters. Improve water’s taste and odor, including chlorine odor reduction.
C Reverse Osmosis or Ultra filtration. Reverse Osmosis Membrane reduce dissolved substances.
Several membranes capacities are available. Ultra Filtration membrane reduce undissolved solids down
to 0.1 Micron
D Several filter options are available depending on your local conditions and requirements.
** Single Stage Standalone System Port Connection Size - 1/4” Quick Connect
RO Membrane
Standard System Specifications*
Easy maintenance of service
components including line
check valve and autoshut off
PART #
DESCRIPTION
Aqua Flo Platinum QCRO (Quick Change) Reverse Osmosis
*Customized systems available upon request.
1340302-60
QCRO4V-50 4 STAGE, 50GPD, METAL TANK, STD CHROME AG FAUCET
1340302-60-A
QCRO4V-50 4 STAGE, 50GPD, METAL TANK, 50 MICRON CARBON, STD CHROME AG FAUCET
1340302-60-D
QCRO4V-50 4 STAGE, 50GPD, METAL TANK, DELUXE CHROME AG VS888 FAUCET
1340303-60
QCRO4V-75 4 STAGE, 75GPD, METAL TANK, STD CHROME AG FAUCET
1340303-60-A
QCRO4V-75 4 STAGE, 75GPD, METAL TANK, 50 MICRON CARBON, STD CHROME AG FAUCET
1340303-60-D
QCRO4V-75 4 STAGE, 75GPD, METAL TANK, DELUXE CHROME AG VS888 FAUCET
Aqua Flo Platinum QCUF (Quick Change) Ultra Filtration
Conditions for Use
** Nephelometric Turbidity Unit
*** Silt Density Index: Value
stated in SDI units
† Manufacturer’s output specification only with inlet conditions
of 345 kPa (50 psig), 25°C (77°F),
going to atmosphere.
QCUF 4 STAGE, ULTRAFILTRATION, STD FAUCET
1340201-60-D
QCUF 4 STAGE, ULTRAFILTRATION, DELUXE CHROME AG VS888 FAUCET
1340201-60-A
QCUF 4 STAGE, ULTRAFILTRATION, STD FAUCET, 50 MICRON CARBON
1340201-60-A-D
QCUF 4 STAGE, ULTRAFILTRATION,DELUXE CHROME AG VS888 FAUCET, 50 MICRON CARBON
1340201-60-A-D-S QCUF 4 STAGE, ULTRAFILTRATION,DELUXE BRIGHT NICKEL AG VS888 FAUCET, 50 MICRON CARBON
Aqua Flo Platinum QC Single Filters (c/w Mounting Bracket)
15.8”
14.5”
4.7”
41407001-14
SEDQC1/4 SEDIMENT FILTER
41407002-14
CBQC1/4 CARBON BLOCK FILTER
41407006-14
CB50QC1/4 CARBON BLOCK FILTER - 50 MICRON
41407004-14
GACQC1/4 GAC CARBON FILTER
41407007-14
PHQC1/4 pH BOOSTER FILTER
41407005-14
UFQC1/4 ULTRA FILTRATION (HOLLOW FIBRE) MEMBRANE
41407009-14
CB1QC1/4 CARBON BLOCK FILTER - 1 MICRON
41407010-14
SCALEQC1/4 SCALELESS FILTER
Aqua Flo Platinum Quick Change Replacement Filters
13.1”
Notes:
* Pressure Regulator is recommended for feed water
pressures exceeding 552 kPa
(80 psig). The performance of
a reverse osmosis membrane
is highly dependent upon
pressure,
temperature and TDS. The actual volume of product water and
rejection percentage will vary
with differences from the test
conditions that membrane
ratings are based upon. These
drinking water systems are
not intended to be used for
the treatment of water that is
microbiologically unsafe or of
unknown quality.
Storage tank capacity is dependent on pressure. Example:
witha 7 psi precharge, the
drawdown volume is 2.16 gal
at 60 psi,
1.79 gal at 40 psi for the storage
tank shown
1340201-60
2.5”
41407001
SEDIMENT FILTER
41407002
CARBON BLOCK FILTER
41407006
CARBON BLOCK FILTER -50 MICRON
41407004
GAC CARBON FILTER
41407007
pH BOOSTER FILTER
41407005
UF (HOLLOW FIBER) MEMBRANE
41407009
CARBON BLOCK - 1 MICRON
41407010
SCALELESS
41407003
RO MEMBRANE 50 GPD
41407008
RO MEMBRANE 75 GPD
41407011
ANNUAL REPLACEMENT FILTER KIT FOR QCRO (2 SEDIMENT / 3 CARBON BLOCK)
*Note: Two Carbon filters required on most standard RO and UF system configurations
44
Drinking Water
Drinking Water
45
Aqua Flo Platinum 1240 Series
Aqua Flo Platinum 1240 Series
Aqua Flo Platinum 1240’s advanced reverse osmosis drinking water systems are a natural and economical solution for providing your family with high quality drinking water. With a space-saving ultra slim profile, the system
tucks neatly under your kitchen sink providing bottled water quality right from your very own tap.
Conditions for Use
All systems are backed by a two year limited warranty. The Smartap® water quality monitor found on the Push
Button designated models is backed by a five year limited warranty.
All models feature:
0 Simple snap fit cover for ease of service
0 High quality reverse osmosis membrane
0 New slim profile with integrated mounting bracket for easy, space saving installation
0 75 gallons per day
0 Quick connect fittings
0 Sediment pre-filtration
0 Color coded tubing for ease of installation
0 Pre & Post Carbon block filtration
0 Plastic 3.0 gal Storage Tank
0 3/8” tubing from RO to tank and faucet for higher flow
Notes:
• 1 Pressure Regulator is recommended for feed water pressures exceeding 552 kPa (80 psig).
• The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejection percentage will vary with differences from the test conditions that membrane ratings are based upon.
• These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.
• Storage tank capacity is dependent on pressure. Example: with a 7 psi precharge, the drawdown volume is 2.16 gal at 60 psi, 1.79 gal at 40 psi for the storage
tank shown.
• This product is manufactured under one or more of the following U.S. patents: 5,045,197; 5,057,212; 5,221,473
0 Chrome faucet
Booster Pump ( R/O feed water line booster pump )
Raises the water pressure and maintains it at the ideal
level for the system to operate at maximum efficiency.
Recommended for use on supplies with low pressure
or high concentrations of total dissolved solids (TDS).
The pump is self-priming and whisper-quiet. It runs on a
24VAC transformer (included) from a standard 120VAC
electrical outlet.
System includes: Flexible mounting plate, quick connect
fittings and a pressure shut-off switch.
4VTFC75GPB
Item #: Model: 4VTFC75G
NOTE: All units ship with Plastic storage tank.
70030001
RO Booster with Pressure Switch and
Transformer for 25 to 75 Gallon per
day Systems
PLATINUM
PART #
DESCRIPTION
Aqua Flo Platinum 1240 Series Reverse Osmosis Drinking Water Systems
1240203-60
4VTFC75G
1240303-60
4VTFC75G - PB
1240202-60A 4VTFC50G, 50 MICRON CARBON BLOCK
Aqua Flo Platinum 1240 Series Replacement Cartridges & Membranes
41400076
SEDIMENT/CARBON ‘DUAL PURPOSE’ FILTER FOR 3 VESSEL MODELS ONLY, BLUE
CAP
41400008
STRING WOUND SEDIMENT FILTER FOR 4 VESSEL MODELS ONLY, BLACK CAP
41400009
PRE-CARBON FOR 4 VESSEL & POST CARBON FOR 3 & 4 VESSEL MODELS, BLUE
CAP
33001068
25 GPD TFC MEMBRANE, YELLOW CASE, BLACK TAPE, FOR 1230/1240 SERIES
33001033
50 GPD TFC MEMBRANE, YELLOW CASE, BLACK TAPE, FOR 1230/1240 SERIES
33001056
75 GPD TFC MEMBRANE, YELLOW CASE, BLACK TAPE, FOR 1230/1240 SERIES
46
Drinking Water
Raises the water
“
pressure and maintains
it at the ideal level ...
”
Drinking Water
47
Aqua Flo 475 Series Reverse Osmosis
Systems
Features:
0Four stage filtration: 5 micron sediment pre-filter, 10
micron coconut carbon pre & post filters, quick
connect 75 GPD NSF Certified TFC membrane
0 Bayonet-style 1/4 turn quick connect disposable
cartridges with auto water shut-off
0 Includes faucet and 3.0 gallon NSF Certified storage tank. (Designer faucets available)
Fast, Simple & Sanitary
Maintenance!
Quick connect disposable cartridges and
membrane make for easy ‘Do-It-Yourself’
maintenance. With built in auto water shut-offs
there is no need to turn off the water supply
prior to maintenance.
Because traditional systems require the
disinfection of the permanent housing canisters
and involve more direct human contact,
maintenance can take as much as an hour
and if not done properly can result in a
contaminated system.
475QC Filters
The 475 Quick Change Filter Series offers 3, 2
& Single Stage options to provide solutions
for a variety of water problems including
sediment, rust, bad taste & odor.
0 3/8” tubing for high product flow rate from tank to faucet
Features & Benefits:
0 Quick connect fittings, inlet saddle and drain saddle, labelled tubing for easy installation
0 No reject water (100% water used)
0 Booster pump model with inlet solenoid raises water pressure to ideal level for maximum efficiency.
Recommended on rural supplies with low pressure
or high TDS
0 Two year warranty (excluding consumable filter
cartridges and RO membrane)
0 Dimensions:
13”w x 141/2”h x 41/2 d No Pump
141/4”w x 161/2”h x 61/4”d Pump Model
0 Low cost alternative to RO
0 Leaves nutrients in water
0 Ultra Filtration on system removes lead,
VOC (pesticides, herbicides, chemicals),
THM, chlorine, taste and odor and
sediment down to 0.2 microns.
0 Installation is quick and easy
0 Quick change bayonet-style disposable
cartridges are more sterile and can be
changed in seconds
Change filters in seconds
without turning off water!
No tools required!
0 Includes standard chrome faucet, inlet
saddle valve, and 5ft ¼” tubing
Change filters in
seconds without
turning off water!
No tools required!
Disposable cartridges changes in seconds and
reduce contamination risk!
PART #
Aqua Flo Under Sink
Filtration Systems
0 No storage tank required
0 Dimensions:
• 3 stage - 11.8”w x 14.3”h x 4.5”d
• 2 stage - 6.3”w x 13.4”h x 3.9”d
• 1 stage - 2.8”w x 12.4”h x 3.2”d
DESCRIPTION
Aqua Flo 475 Series Drinking Water Systems
475 QC Series Filter Systems
20010023 475 PRO Series RO system
20010024 475 PRO Series RO system w/BP
20010025 475 PRO Series RO system (Air gap faucet)
20010026 475 PRO Series RO system w/BP (Air gap faucet)
Replacement Filters & RO Membrane
65010086 SED-10 (Sediment Filter - 5 Micron)
65010088 COC-10 Coconut Carbon (Pre & Post 10 Micron)
70010014 RO Membrane 75 GPD TFC
Booster
Pump
Model
65010087 CB-10 Carbon Block (Optional Filter - 10 Micron)
65010089 GAC-10 Granular Carbon (Optional Filter)
48
Drinking Water
PART #
DESCRIPTION
Filter 1
Filter 2
Filter 3
20010201
475QC-3 TRIPLE STAGE ULTRA FILTER
SED
UF
COC
COC
20010202
475QC-2 DOUBLE STAGE DUAL FILTER
SED
20010203
475QC-1C SINGLE STAGE COCONUT CARBON FILTER
COC
20010204
475QC-1S SINGLE STAGE SEDIMENT FILTER
SED
20010205
475QC-1G SINGLE STAGE GAC FILTER
GAC
475 QC Series Replacement Filters
Feed Water Guidelines
MICRON
FLOW
RATE
CAPACITY
(GALLONS)
SEDIMENT FILTER SED-10 BLUE (475 Q SERIES)
5
1 GPM
900
PART #
DESCRIPTION
65010086
Maximum TDS
2000 ppm
65010088
CARBON FILTER COC-10 PURPLE (475 Q SERIES)
10
1 GPM
1,500
Hardness
<7gpg
65010089
CARBON FILTER GAC-10 YELLOW (475 Q SERIES)
-
0.7 GPM
1,500
Iron (Fe)
<0.2ppm
65010093
ULTRA FILTER UF-10 BLACK (475 Q SERIES)
0.2
0.7 GPM
1,500
Manganese (Mn)
<0.05ppm
Hydrogen Sulfide
0.0ppm
Turbidity
<1.0NTU
Feed Water Pressure
40-100psi
Temperature
40-100°F
pH Range
3.0-11.0
Drinking Water
49
Aqua Flo Economy Reverse
Osmosis System
Features:
0 Heavy duty glass filled polypropylene
construction provides double the strength, toughness & durability compared to most other RO’s which are typically constructed with ABS.
0 TFC 75 GPD reverse osmosis membrane provides up to 99% Total Dissolved Solids (TDS) rejection
Reverse Osmosis Storage Tanks
Flexwave is a line of RO accumulators and storage tanks
for residential and light commercial applications.
Flexwave tanks are made in the USA and built to comply
wiith NSF/ANSI Std 61. All Flexwave tanks have a 5 year
warranty.
0 Pre-filters 10’’ five (5) micron Spun Polypropylene
Sediment Cartridge and 10’’ Activated Carbon Cartridge
0 Post filter: 10’’ Activated Carbon Cartridge
0 Choose from air gap or non-air gap chrome
plated faucets
0 3.0 Gallon NSF Certified plastic storage tank
PART #
DESCRIPTION
Aqua Flo Economy Drinking Water System
20010030
4 stage 75 GPD RO system
20010031
4 stage 75 GDP RO system w Booster Pump
20010034
4 stage 75 GPD RO system (Air Gap)
20010035
4 stage 75 GDP RO system w Booster (AirGap)
Replacement Filters & RO Membrane
Item #
Description
26081
5 Micron Pre-Filter - 10” Sediment
26273
Pre & Post Filter - 10” Carbon
92022
75 GPD TFC Membrane
0 3/8’’ outlet tubing for higher flows
0 Automatic shut-off valve
0 Exclusive serviceable check valve eliminates spring ‘chatter’ noise common in other RO’s
0 Quick connect fittings for ease of installation
0 Powder coated bracket
0 Dual purpose wrench for use on membrane cap and filter housing
0 Dimensions:
15.0”w x 14.5”h x 6.1”d No Pump
15.0”w x 17.7”h x 6.9”d Pump Model
Booster Pump Model also includes:
# 70031000 Quick Connect Ball Valve Assembly
reduces 1’’ tank connection to John Guest Quick
Connect RO ball valve 1/4’’ to 3/8’’ tubing.
Larger sizes available. Please contact Customer Service for details.
Tank precharge 20 PSI
0 Pump mounted on RO to maintain constant water
pressure to membrane
Maximum Pressure 125 PSI
0 Raises water pressure to ideal level for maximum
efficiency
Maximum working temperature, internal & external 120F
0 Use on rural supplies with low pressure or highTDS
Materials of Construction
0 Exclusive Auto Flush feature extends membrane life
Tank top and bottom domes injection molded copolymer polypropylene. Shell extruded Polypropylene.
Outer shell composite construction with fiberglass coated with epoxy resin. Base is injection molded
high-impact ABS. 100% butyl diaphragm connected to a copolymer polypropylene bottom water
chamber which allows for complete evacuation of the water chamber.
0 Self-priming and whisper quiet
0 24VAC transformer (included) from a standard 120VAC electrical outlet
Dimensions & Capacities
0 Flexible mounting plate, quick connect fittings and
pressure shut-off switch
Model
FWRO15
FWRO22
Item #
Total Tank Volume
92372
92374
Gallons
15 Gal
22 Gal
Litres
56.8
83.3
Height
In
25.6
34.1
Cm
65
87
Diameter
In
16.5
16.5
Cm
42
42
Connection
In
1” NPT
1” NPT
Total Weight
Lbs
19
25
Kilos
8.6
11.3
Quick Sizing Chart
#80010058 JG Undersink 3/8” connection angle stop / shut off
#80010059 JG Undersink 1/4” connection angle stop / shut off
Model
FWRO15
FWRO22
50
Drinking Water
Item #
Total Tank Volume
92372
92374
Gallons
15 Gal
22 Gal
Litres
56.8
83.3
Total Drawdown
10/50
10/60
Gallons Litres Gallons Litres
9.3
35.2
10
37.9
13.6
51.5
14.7
55.6
Drinking Water
51
Designer Faucets
RO Booster Pumps
Designer RO faucets are a stylish addition to any
kitchen. The NSF Certified lead-free ceramic disk
faucets are available in many attractive finishes
to coordinate with any decor. The faucets feature
lead-free plastic water passages and lead-free
brass gooseneck spouts that swivel 360 degrees
for ease of use.
PART #
DESCRIPTION
87588
Faucet, VS888, Antique Brass
87589
Faucet, VS888, Antique Wine
87581
Faucet, VS888, Brushed Nickel
70040052
Faucet, VS888, Oil Rubbed Bronze
87580
Faucet, VS888, Polished Chrome
87585
Faucet, VS888, Satin Nickel
87584
FAUCET, VS888, BLACK
0 Boosts pressure 40 to 120 psi (adjustable)
70040045
Faucet, VS905, Antique Brass
70040054
Faucet, VS905, Antique Wine
0 Used with membranes 50 to 120 GDP
87583
Faucet, VS905, Brushed Nickel
0 15,000+ operating hours (estimated)
87587
Faucet, VS905, Oil Rubbed Bronze
87582
Faucet, VS905, Polished Chrome
0 Quiet – less than 52 DBA
87586
Faucet, VS905, Satin Nickel
87591
Stand, Display
92710
Faucet Colour Sample Display
Specifications
Height
Spout Reach
Mounting Hole Diameter
Base Diameter
VS888
VS905
Color Sample Display
#70040059
VS888
PAB8800 Series High Flow Booster Pump
Key Operational Benefits:
0 Can run dry without damage
Features:
VS905
11.5” (292mm)
11.075” (281.32mm)
5.7” (146mm)
4.75” (120mm)
1/2” (12.5mm)
1/2” (12.5mm)
1.73” (44mm)
1.76” (44.8mm)
Connection
1/4” compression nut
fitting
1/4” compression nut
fitting
Operating Pressure
125 PSI/8.3BAR
125 PSI/8.3BAR
Flow Rate
1.0 gpm/3.785lpm @35
PSI/2.32BAR
1.0 gpm/3.785lpm @35
PSI/2.32BAR
Temp Rating
Warranty
4°C/40°F to 70°C/158°F
4°C/40°F to 70°C/158°F
2 Years
2 Years
* All mounting hardware included. A 3/8” quick connect faucet adapter fitting
(#80010017) can be purchased seperately.
0 Toughest, most durable pump on the market
0 More flow at extremely low inlet pressures
0 Adjustable max. outlet psi (regardless of feed
pressure)
0 New motor venting system to remove moisture
0 Expels trapped air (no more air locks)
0 Can be mounted with pump head up or
horizontal
0 EMI/RFI electronic noise suppression
0 100% final performance tested
0 Available in 12VDC and 24VDC
Aquatec 5800 Demand Pump
OPERATION: The 5800 pump can draw water from a holding
tank and pressurize it, or boost the pressure from a low pressure
source. They are designed to operate intermittently, but most
versions can run continuously for several hour intervals. The
pumps can be operated in demand mode controlled by an
integral pressure switch, or in delivery mode controlled by an
external power switching device. An integral bypass may be used
to limit pressure.
POWER: 115V PSI: 60 GPM: 0.9
MOUNTING: A steel mounting base with four hollow rubber
grommets is standard and included at no extra cost. The pump
may be mounted in any position.
FITTINGS: The 5800 pump is offered with integral John Guest
style quick connect fitting for 3/8” OD semi rigid tubing.
KemFlo MD1050 Booster Pump
DESCRIPTION: 110/230 VAC, 75 GPD Booster pump 1.0 L.min,
suitable for applications with 24VDC transformer
SPECIFICATIONS: Kemflo MD Series booster pump with 3/8”
FNPT, made from NSF grade material high power flow rate and
quality.
Meet ROHS standard.
Item #
92325
92317-1
92341
70030035
52
Drinking Water
Model
KF - BOOSTER PUMP - MD1050
AQUATEC MODEL PAB8800 BOOSTER PUMP
AQUATEC MODEL PD5800 DEMAND PUMP
RO-75 BOOSTER PUMP
Drinking Water
53
PURA™ Ultraviolet Disinfection
Systems
PURA Ultraviolet Disinfection Systems offer a broad range of solutions with features and flow rates to satisfy
most applications.
The PURA UVB, UV20 and UVBB models offer a combination of UV disinfection and filtration in convenient, bracket mounted, all-in-one packages.
The PURA Gen 5 & 6 Series offer more advanced, axial-flow stainless steel systems with advanced monitoring.
The AB UV offers an entry level stainless steel UV system for lower price points.
The UV1-EPCB and UV ADDON Series offer smaller solutions for lower flow rate applications.
Customized
Drinking
Water
These systems are for the supplemental treatment of disinfected drinking
water which has been treated or other drinking water which has been tested
and deemed acceptable for human consumption by the state or local health
agency having jurisdiction. These systems are designed to reduce normally
occurring nonpathogenic nuisance organisms and is not intended for the
treatment of contaminated water.
PURA
Ultraviolet
Disinfection
Systems
Conditions For Use - All Lines
The contaminants and other substances reduced by this water treatment device are
not necessarily in your water. In addition, the presence of certain contaminants in your
drinking water does not necessarily pose a health risk.
U.S. Patent #4,971,687
54
Ultraviolet Disinfection Systems
55
PURA™ Gen 5 Residential Systems:
Sample
Screens
Genesis H2O: Ultraviolet Disinfection System
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen 5 Residential Systems
Features:
0 Five models available (Gen5-3, 6 , 10, 15 & 20)
0 Colour user interface with full diagnostics and
warnings including QR codes
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
0 “Future-proof” expandability port for future
upgrades and options
0 Designed & manufactured to ASME pressure vessel
standards
0 Axial flow, 316L stainless steel reactor, polished
reactors with integral sensor port to allow for
sensor upgradeability in the future (comes standard
with visual glow plug)
* See price list for specific item numbers
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
Options
0 Reliable, industry proven low pressure (LP) coated
UV lamps with ceramic bases for durability and a
9000 hour life (1 year)
0 Constant current electronic controller (one
controller for all systems) in a splash-proof case
0 Warranty (refer to Owner’s Manual for complete
details including conditions & exclusions):
• Reactor Chamber – Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
PURA GEN 5
Item #
Model
40030001 UV STERILIZER PURA GEN 5-3 (3 gpm)
40030002 UV STERILIZER PURA GEN 5-6 (6 gpm)
40030003 UV STERILIZER PURA GEN 5-10 (10 gpm)
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all GenH6 units.
REPLACEMENT PARTS
Solenoid Module
System
Lamps
Sleeves
Used to power a
RL-470
RQ-470
remote normally
Pura Gen 6-6
#40040014 #40040043
closed solenoid
RL-820
RQ-820
Pura Gen 6-10
#40040015 #40040045
valve (not includRL-999
RQ-999
ed). Solenoid valve Pura Gen 6-15 #40040017
#40040048
will close on lamp
RL-850
RQ-850
Pura Gen 6-20
#40040016 #40040046
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
Controller
RC-B56.01
#40040066
RC-B56.01
#40040066
RC-B56.01
#40040066
RC-B56.01
#40040066
40030004 UV STERILIZER PURA GEN 5-15 (15 gpm)
40030005 UV STERILIZER PURA GEN 5-20 (20 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
56
Ultraviolet Disinfection Systems
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
57
Gen 6 Residential Systems
Sample
Screens
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen 6 Residential Systems
Features:
0 Four models available (Gen 6-6 , 10, 15 & 20)
0 True 254nm Teflon® based UV sensor continuously
measures UV output and visually displays output via
controller
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Axial flow, 304 stainless reactors
0 Designed & manufactured to ASME pressure vessel
standards
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
* See price list for specific item numbers
0 True gland seal retaining nut with positive stop
0 Reliable, industry proven low pressure (LP) coated
UV lamps with ceramic bases for durability and a
9000 hour life (1 year)
Options
0 Constant current electronic controller (one
controller for all systems) in a splash-proof case
0 Warranty (refer to Owner’s Manual for complete details including conditions & exclusions):
• Reactor Chamber - Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
• UV Sensors – One (1) Year Limited
PURA GEN 6
Item #
Model
40030006 UV STERILIZER PURA GEN 6-6 (6 gpm)
40030007 UV STERILIZER PURA GEN 6-10 (10 gpm)
40030008 UV STERILIZER PURA GEN 6-15 (15 gpm)
40030009 UV STERILIZER PURA GEN 6-20 (20 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
58
Ultraviolet Disinfection Systems
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all GenH6 units.
Solenoid Module
REPLACEMENT PARTS
Used to power a
System
Lamps
Sleeves
RL-470
RQ-470
remote normally
Pura Gen 6-6
#40040014 #40040043
closed solenoid
RL-820
RQ-820
Pura Gen 6-10
#40040015 #40040045
valve (not includRL-999
RQ-999
ed). Solenoid valve Pura Gen 6-15 #40040017
#40040048
will close on lamp
RL-850
RQ-850
Pura Gen 6-20
#40040016 #40040046
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
Controller
RC-B56.01
#40040066
RC-B56.01
#40040066
RC-B56.01
#40040066
RC-B56.01
#40040066
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
59
Gen H5 Residential Crossover
High Flow Systems
Sample
Screens
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen H5 Residential Crossover
High Flow Systems
Features:
0 Five models available (Gen H5-5, 10, 15, 25 & 40)
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Axial flow, 316L stainless steel reactor, polished
reactors with integral sensor port to allow for sensor upgradeability in the future (comes standard with visual glow plug)
* See price list for specific item numbers
0 Designed & manufactured to ASME pressure vessel
standards
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
0 True gland seal retaining nut with positive stop
0 Reliable, industry proven low pressure, high-output
(LP-HO) coated UV lamps with ceramic bases for
durability and a 10,000 hour life
Options
0 Universal input, constant current electronic
controller (one controller for all systems) in a
splash-proof case
0 Warranty (refer to Owner’s Manual for complete details including conditions & exclusions):
• Reactor Chamber – Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
PURA GEN H5
Item #
Model
40030010 UV STERILIZER PURA GEN H5-5 (5 gpm)
40030011 UV STERILIZER PURA GEN H5-10 (10 gpm)
40030012 UV STERILIZER PURA GEN H5-15 (15 gpm)
40030013 UV STERILIZER PURA GEN H5-25 (25 gpm)
40030014 UV STERILIZER PURA GEN H5-40 (40 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
60
Ultraviolet Disinfection Systems
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all GenH6 units.
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
REPLACEMENT PARTS
System
Pura Gen H5-5
Pura Gen H5-10
Pura Gen H5-15
Pura Gen H5-25
Pura Gen H5-40
Lamps
RL-210HO
#40040018
RL-330HO
#40040019
RL-420HO
#40040020
RL-600HO
#40040021
RL-950HO
#40040022
Sleeves
Controller
RQ-210
RCHO-B56.12
RQ-330
RCHO-B56.12
RQ-420
RCHO-B56.12
RQ-600
RCHO-B56.12
RQ-950
RCHO-B56.12
#40040039
#40040041
#40040042
#40040044
#40040047
#40040074
#40040074
#40040074
#40040074
#40040074
Ultraviolet Disinfection Systems
61
Gen H6 Residential Crossover
High Flow Systems
Sample
Screens
A Security System For Your Water
UV technology provides additional security for your
water supply. It is proven to control microbiological
(bacteria & virus) issues in water including E.coli,
Cryptosporidium, and Giardia Lamblia without the use
of chemicals.
Gen H6 Residential Crossover
High Flow Systems
Features:
0 Five models available (Gen H6-5, 10, 15, 25 & 40)
0 True 254nm Teflon® based UV sensor continuously
measures UV output via the controller
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Axial flow, 316L stainless steel reactor
0 Designed & manufactured to ASME pressure vessel
standards
* See price list for specific item numbers
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
0 True gland seal retaining nut with positive stop
0 Reliable, industry proven low pressure, high-output
(LP-HO) coated UV lamps with ceramic bases for
durability and a 10,000 hour life
Options
0 Universal input, constant current electronic
controller (one controller for all systems) in a
splash-proof case
0 Warranty (refer to Owner’s Manual for complete details including conditions & exclusions):
• Reactor Chamber – Ten (10) Year Limited
• Electronics – Three (3) Year Limited
• UV Lamps – One (1) Year Limited
• Quartz Sleeves – One (1) Year Limited
• UV Sensors – One (1) Year Limited
PURA GEN H6
Item #
Model
40030015 UV STERILIZER PURA GEN H6-5 (5 gpm)
40030016 UV STERILIZER PURA GEN H6-10 (10 gpm)
40030017 UV STERILIZER PURA GEN H6-15 (15 gpm)
40030018 UV STERILIZER PURA GEN H6-25 (25 gpm)
40030019 UV STERILIZER PURA GEN H6-40 (40 gpm)
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
62
Ultraviolet Disinfection Systems
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H5 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all GenH6 units.
Solenoid Module REPLACEMENT PARTS
System
Lamps
Sleeves
Used to power a
RL-210HO
RQ-210
remote normally
Pura Gen H6-5
#40040018 #40040039
closed solenoid
RL-330HO
RQ-330
valve (not includ- Pura Gen H6-10 #40040019 #40040041
RL-420HO
RQ-420
ed). Solenoid valve Pura Gen H6-15 #40040020
#40040042
will close on lamp
RL-600HO
RQ-600
Pura Gen H6-25
#40040021 #40040044
failure or when low
RL-950HO
RQ-950
UV conditions are Pura Gen H6-40 #40040022
#40040047
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
Controller
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
RCHO-B56.12
#40040074
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
Ultraviolet Disinfection Systems
63
Gen 5 UV/Filter Rack System
Sample
Screens
A Combination Water System
For Your Entire Home or Cottage
Combining ultraviolet disinfection (UV) with whole-house
filtration provides your home or cottage with clean,
great-tasting water that you can rely on. UV is proven to
control microbiological (bacteria & virus) issues in water
including E.coli, Cryptosporidium, and Giardia Lamblia
without the use of chemicals. Combining UV disinfection
with whole-house sediment and/or carbon pre-treatment
filters improves UV performance and the taste, smell and
clarity of your water.
Features:
0 Four models provide a range of flow rate and filter
combination options suitable for your specific needs
NSF Certified
Models
Available.
Contact
Customer
Service For
Details.
0 Models for 8 & 13 gpm flow rates
0 All systems include 5 micron sediment removal
pretreatment required for proper UV performance
0 Optional ‘high-flow’ carbon filters to treat bad
tastes and odors
0 Pressure relief, high-flow polypropylene filter
housings
0 Colour user interface with full diagnostics and
warnings including QR codes
0 “Future-proof” expandability port for future
upgrades and options
0 Designed & manufactured to ASME pressure vessel
standards
0 Axial flow, 316L stainless steel polished reactors
designed & manufactured to ASME pressure vessel
standards
Options
0 Flow rates stated at 95% UVT at a dose of 30mJ/cm2
0 User friendly bayonet style lamp connector (Quick ¼
turn removal. No extra tools required.)
0 Reliable, industry proven low pressure (LP) coated
UV lamps with ceramic bases for durability and a
9000 hour life (1 year)
0 Constant current electronic controller in a
splash-proof case
GEN 5 UV / FILTER RACK SYSTEM
Item #
Model
40030050
UV STERILIZER / FILTER RACK SYSTEM PURA GEN 5 - 8R1
40030051
UV STERILIZER / FILTER RACK SYSTEM PURA GEN 5 - 8R12
40030052
UV STERILIZER / FILTER RACK SYSTEM PURA GEN H5 - 13R2
40030053
UV STERILIZER / FILTER RACK SYSTEM PURA GEN H5 - 13R22
Parameter
Hardness
Iron (Fe)
Manganese (Mn)
Tannins
Turbidity
Transmittance (UVT)
64
Ultraviolet Disinfection Systems
Level
< 7 gpg (120 mg/L)
< 0.3ppm (mg/L)
< 0.05ppm (mg/L)
< 0.1ppm (mg/L)
< 1 NTU
> 75%
UV Sensor Module
Allows the 254nm
UV wavelength to
be measured and
displayed via the
GEN-H6 controller.
The sensor plugs
directly into the
controller and is
mounted in the
sensor port located
on all GenH6 units.
Solenoid Module
Used to power a
remote normally
closed solenoid
valve (not included). Solenoid valve
will close on lamp
failure or when low
UV conditions are
detected by the
sensor. Available in
110V MODSOL1
(Item # 40040006)
4-20mA Module Used for signal
transfer to a remote device such
as a data logger or computer)
Remote Alarm (Dry Contact) Module Used
for signal transfer to a remote alarm or dry
contacts.
Ultraviolet Disinfection Systems
65
PURA™ ABUV Series Ultraviolet
Disinfection Systems
PURA™ Ultraviolet Disinfection
Systems
PURA ABUV Series™
UVB Series™
The PURA® ABUV Series is an entry level. Ultraviolet
Water Disinfection System. The system will provide
you with disinfected drinking water for years to
come. These systems have been designed with high
quality construction and innovative features.
PURA Product’s patented UVB Series is designed to provide
disinfected water at a flow rate of 2 gallons per minute. In
addition to disinfection, water is filtered through our 0.5
micron Extended Pass Carbon Block (EPCB) filter.
Our double and triple models provide you with additional
filtration with sediment and activated carbon filters.
Disinfection of water using ultraviolet light at a wavelength at 254nm is a chemical free way of destroying
the DNA of microorganisms rendering them unable
to replicate or cause infection. Installation of the
system is straight forward and simple. Maintenance
includes changing the lamp once a year and cleaning
the quartz sleeve periodically.
This compact All-in-One system installs with ease and can be
used anywhere that clean, clear, good tasting disinfected
water is needed. It is ideal for point-of-use applications like
under the kitchen sink, office water coolers, water
vending machines, boats, recreational vehicles, etc.
Features:
The PURA® ABUV models are tested and certified by
NSF against Standard 55 for Class B disinfection.
0 Electronic lamp indicator (LED)
Features:
0 Standard voltage 115V
0 Lamp Failure Visual and Audible Alarm
Options:
0 Lamp Change Reminder
0 220V/50Hz (2-Prong Euro plug)
0 Countdown Lamp Timer
0 12V DC
0 115V / 60Hz North American 3-Prong Grounded
0 Lamp Out Circuit (LOC) - (normally open) Safety
monitor for alarm
Plug
0 Lamp Out Circuit (LOC) - (normally closed) Safety
monitor for solenoid shut off
Conditions for Use
infected by a PURA® Ultraviolet Water Disinfection
System, additional pretreatment may be necessary.
The following table outlines the basic parameters
that need to be tested and treated should your
water fall outside these parameters. An additional
5 micron sediment and housing is recommended as
a minimum pretreatment to guard against any large
particles that may mask the ultraviolet light and also
assist with startup procedures.
A inches (cm)
17.32 (44)
23 (58.5)
31.5 (80)
B inches (cm)
2.5 (6.35)
2.5 (6.35)
2.5 (6.35)
C inches (cm)
4.33 (11)
4.33 (11)
4.45 (11.3)
D inches (cm)
21.65 (55)
27.56 (70)
36.61 (93)
Specifications & Performance UVB Series
Specifications
Item #
8880
8881
8882
Model #
Buv-6
Buv-8
Buv-12
NSF Rated Flow Rate @ 16mJ/
5.5 (20.79) 7.8 (29.48) 12 (45.36)
cm2 @ 70% UVT - usgpm (l/min)
Flow Rate @ 16 mJ/cm2 @
96% UVT - usgpm (l/min)
12 (45.36)
18.8 (71)
Flow Rate @ 30 mJ/cm2 @
96% UVT - usgpm (L/min)
6.4 (24.2)
10 (37.8) 13.9 (52.5)
Flow Rate @ 40 mJ/cm2 @
96% UVT - usgpm (l/min)
4.8 (18.14) 7.5 (28.35) 10.4 (39.31)
Lamp Power (Watt)
29
40
0.5
0.4
0.4
Inlet and Outlet Size NPT
1/2”
3/4”
1”
6 (2.67)
8 (3.57)
12 (5.36)
Operating Pressure psi (kpa)
10-100 psi (69-689 kPa)
Operating Temperature Range
36 to 104° F (2 to 40° C)
Electrical
Electrical Plug
Ultraviolet Disinfection Systems
21
26 (98.28)
Max. Current (Amp)
Weight lbs (kg)
66
0 Three year warranty except on electrical components which are covered for a period of one year.
Dimensions
Depending on the chemistry of the water to be dis-
Note: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
100-240V - 50/60Hz
North American
Ultraviolet Disinfection Systems
67
PURA™ Ultraviolet Disinfection
Systems
PURA™ Ultraviolet Disinfection
Systems
UV20 Series™
UV BigBoy™ Series
The PURA Product’s UV20 Series is designed to provide
disinfected water at a flow rate of 8 - 10 gallons per minute.
This system is ideal for whole house water treatment.
In addition to disinfection, the double and triple models
provide filtration for the removal of sediment and chemical
contaminants.
The UV BigBoy Series is the most versatile
commercial ultraviolet disinfection system
on the market today. This 15 to 60 GPM
series is manufactured with versatility
in mind, and is virtually unlimited in the
possible filter configurations and manifold
sequences. The series is designed with
the same traditional style that PURA has
made an industry standard - worldwide.
This ultraviolet water treatment system makes a perfect
companion to water softeners, distillers, reverse osmosis
and ozone systems. The UV20 Series has proven to be
PURA Product’s most popular product line and has created
an industry standard in whole house disinfection.
Features:
0 Electronic lamp indicator (LED)
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
0 12V DC
0 Lamp Out Circuit (LOC) - (normally open) Safety
monitor for alarm
0 Lamp Out Circuit (LOC) - (normally closed) Safety
monitor for solenoid shut off
One advantage of the UV BigBoy Series is
the convenient manifold mounting rack.
The rack can be used to configure up to
four UV chambers in parallel or in series.
This allows the user to achieve either a
higher UV dosage or higher flow rate (up
to 60 GPM).
This mounting rack configuration provides
easy access for cleaning and maintenance
to the individual units without the need
to shut down the entire water distribution
line. The standard LED lamp monitor
provides a visual verification the lamp is in
operation.
Features:
0 Electronic lamp indicator (LED)
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
0 12V DC
0 Lamp Out Circuit (LOC) - (normally open) Safety
monitor for alarm
0 Lamp Out Circuit (LOC) - (normally closed) Safety
monitor for solenoid shut off
0 Three year warranty except on electrical components which are covered for a period of one year.
The UV BigBoy Series, with its capacity,
versatility and cost, to be the world’s most
flexible, complete water disinfection
system in its class.
Specifications & Performance UV20 Series
Specifications & Performance UV BigBoy Series
0 Three year warranty except on electrical components which are covered for a period of one year.
Specifications & Performance UV BigBoy Series
Note: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
Notes: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
(2) Empty sumps on UVBB-Rack systems can be filled with a wide variety of optional cartridges.
68
Ultraviolet Disinfection Systems
Ultraviolet Disinfection Systems
69
PURA™ Ultraviolet Disinfection
Systems
UV1-EPCB Series™
PURA Product’s UV1-EPCB Series is a great example of
PURA Product’s patented All-In-One concept. This product
combines both ultraviolet disinfection with carbon
filtration all in a very attractive and compact system.
Improved
Water
Quality in
the Home
The UV-1 Series is rated for 1 gallon per minute and uses
either a 0.5 micron (EPCB) carbon block filter or a 10 micron
(EPCB 10) carbon block filter. This easy to install system can
be used as a stand alone or in conjunction with other water
treatment products.
Features:
0 Compact Size
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
0 12V DC
Specifications & Performance UV1-EPCB Series
Notes: EPCB refers to Extended Pass Carbon Block filter
(1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
UV ADDON Series™
PURA Product’s UV ADDON Series is designed to be an easy addition
to water treatment systems that require ultraviolet disinfection (RO
systems, holding tanks, water dispensers, recirculating systems and
more). The ADDON systems are available with a 1 GPM or 3 GPM flow
rate. They are constructed using a 304 grade stainless steel body
with a molded head that includes 3/8” quick connect fittings on the
inlet/outlet. This versatile system also includes a heavy duty mounting bracket, but will also fit standard 2” RO mounting clips. The UV
ADDON Series can be used almost anywhere and is equipped with a
unique power supply that makes installation simple, space requirements minimal and lamp changes easy.
Features:
Aqua Flo
Point-of-Use
Filtration Products
0 3/8” quick connect fittings
0 Standard voltage 115V
Options:
0 220V/50Hz (2-Prong Euro plug)
0 12V DC
Specifications & Performance UV ADDON Series
Note: (1) All flow rates shown will provide a UV dose of no less than 16,000 mW-s/cm2 or greater.
70
Ultraviolet Disinfection Systems
71
Aqua Flo Point-of -Use Water Filters
Aqua Flo Filters
Novo offers a wide range of point-of-use filtration solutions.
The Aqua Flo range of
filters and replacement
cartridges improves water quality in the home,
Aqua Flo Economy - A full line of quality POU products at a great price point.
*Carbon Block
(CB) Cartridge
Filter
There are two considerations when
making a choice of filtration systems:
1) Type of Housing
2) Type of Filter Cartridge
Housings:
Housings come in different sizes, colors, materials of construction and offer different features. Here is a quick breakdown:
0 Size – You need to consider the constraints of your install space first but in general the larger the diameter and longer the housing the more flow rate it can handle and higher removal capacity of the cartridge meaning less frequent cartridge changes.
The CB cartridge filter is
suitable for high capacity
chlorine and bad taste
and odor reduction from
drinking water. These filters are also used
for sediment filtration, making them a
great choice for pre-filtering water for
reverse osmosis applications. They make
an ideal choice for a wide range of residential, food service, commercial and industrial applications.
Features:
0High Dirt-Holding Tolerance Maximizes Utilization of the Carbon Block
0High porosity maximizes utilization of the carbon block
*Dual Gradient (DG) Density Cartridge Filters
0 Color – Housings are usually transparent or opaque. Transparent housing allow for visual inspection when determining to change the cartridges. They are not suitable for outdoor applictions however.
DG cartridge filters are made from 100% polypropylene. The progressively loose structure
from inside to outside enhance cartridge performance in reduction of dirt, dust and other
particles. The two separate gradient layers of the filter enhances the performance such that
it achieves a much higher dirt-loading capacity compared to similar size sediment cartridge
filters including spun and string-wound. They make an ideal sediment reduction choice for a
wide range of residential, food service, commercial and industrial applications.
0 Materials of Construction – Plastic housing are standard for
residential applications and temperatures up to 100°F (38°C).
Stainless Steel housings, while more expensive, are more durable and can filter higher temperature liquids.
0 Features – Some models of plastic housings come with a shut-off valve built into the head of the housing allowing for easier service and installation.
Cartridges:
There is an overwhelming selection of cartridges to choose
from. We have selected a range of cartridges to cover most water quality needs. The two most common applications are for
sediment removal and for taste & odor removal (various types
of carbon filtration).
A micron rating is also common for most cartridges. One
micron is equivalent to 0.000039 inches (the diameter of a
human hair is 50 to 70 microns). Choosing the right micron
rating is a balance between performance and cartridge life. If
you chose a smaller micron rating and the cartridge is loading
up too fast then a higher micron rated cartridge may provide a
better balance.
Features:
0No Fiber release and media migration
0Designed for purity, bacteria and chemical resistance
0Two Separate Gradient density layers enhance
cartridge performance
0Three times the dirt-holding capacity than other traditional sediment filters
Impregnated Carbon Cellulose (ICC) Dual Purpose Filter
The ICC cartridge filter has a dual benefit for sediment filtration and reduction of chlorine and bad
taste and odor from drinking water. These carbon wrap sediment cartridges consists of polypropylene melt blown core with carbon impregnated outer layer wrap. It is an economical solution for
general water filtration requirements. This filter has high dirt-loading capacity and is recommended for chlorinated water supplies. These dual-purpose cartridges are well suited for residential
applications, and are great polishing filters for closedloop water stream systems. The netting and
reinforced support provide strength to the filter.
Features:
0 Provides sediment filtration as well as taste/odor /chlorine reduction
0High dirt loading capacity
0External netting for additional strength
72
Filtration Products
Filtration Products
73
Aqua Flo Filters
Pleated Polyester
Reusable (PR)
Cartridge Filter
PR cartridge filters are made
from reusable polyester fibers
which are pleated to maximize
dirt holding capacity. These cartridge filters are multipurpose.
Features:
0 Pleated design maximizes dirt-holding capacity
0 Durable, versatile and reusable
Aqua Flo Filters
Polypropylene Melt
Blown (PPMB) Filter
Cartridges
The PPMB cartridge filters are made by
thermally bonding polypropylene
microfibers for higher filtration efficiency performance. The polypropylene material is chemical resistant and
not prone to bacterial attack. They will
also not add any taste, color and odor
to the water. They are available in wide variety of
sizes and micron ratings.
0 Polyester media is bacteria and chemical resistant
Features:
0 Nominal 30-micron rating and nominal 50-micron rating
0 Constructed from high quality polypropylene filter media for higher filtration efficiency
*Radial Flow (RF) Granular Activated Carbon Cartridge Filters
The RF cartridge filters are the solution for effective reduction of chlorine
and bad taste and odor. These filters provide low pressure drop and carbon fines released from
the filter are much less compared to the same size GAC style cartridge filter.
0 Thermally bonded micro-fiber construction for high strength
0 Available in micron ratings from 1 to 50 and lengths from 10”- 40
Features:
0 Ideal for POE (whole house) and other high
flow rate applications
0 Unique design reduces carbon fines in
filtered water
0 Very low pressure drop
*String Wound (SW) Polypropylene Cartridge Filters
SW cartridge filters are manufactured from polypropylene cord which is wound around the polypropylene core. These cartridge filters are economical solution for reduction of sediment, sand,
rust and scale particles from the drinking water.
Features:
*Spun Poly Bonded (SPB) Cartridge Filters
The SPB filters are manufactured from 100% polypropylene which is resistant to chemical and less
prone to bacterial attack. Also they do not impart any taste and odor to the water.
0 String wound filters reduces
sediment from a variety of liquids
Features:
0 Withstand high temperatures
0 Low pressure drop
0 Use on chlorinated or non chlorinated supplies.
0 Designed for purity, bacteria and chemical resistance
0 Spun fibers form a true gradient
0 Density from outer to inner surfaces
*Granular Activated (CGAC) Carbon Cartridge Filter
Pleated Polyester Cartridge (PPC) Filter
The PCP cartridge filters are madefrom resin impregnated cellulose andpolyester fibers. They are
constructed with thermally bonded media with end caps and inner core heat sealed
together.
The CGAC cartridge filters are effective in reduction of chlorine and other bad taste and odor
from drinking water. CGACC cartridge filter contain coconut shell based activated carbon which is
an environment friendly but also effective in reducing certain compounds* better than the coal
based granular activated carbon filter cartridges.
Features:
Features:
0 Provides higher wet strength than regular cellulose cartridges
0 Effective taste/odor/
chlorine reduction
0 Designed for maximum
adsorption
0 Post filter to reduce carbon fines
74
0 Wide chemical compatibility
Filtration Products
0 Special formulation of resin
impregnated cellulose and
polyester fibers
0 High flow rate and high
dirtholding capacity
0 Wide Variety on sizes and micron ranges available
Filtration Products
75
Aqua Flo Filter Housings
Aqua Flo Filter Cartridges
Model#s P-H-PR-10-34, P-H-PR-10-34-C/B, P-HPR-10BV-1, P-H-PR-10BV-34, P-H-PR-B-10-34,
P-H-PR-B-10-34-C/BL, P-H-VIH-10-34-C/BL
NOTE: This filter housing does NOT include a filter cartridge.
Choose the appropriate filter cartridge for your needs and
install in housing according to the Cartridge Replacement
instructions before proceeding with installation. See
cartridge selection chart.
Specification
Tools Required
• 2 adjustable wrenches • file • pipe threader
• 2 pipe wrenches • pencil • pipe cutter or hacksaw
Parts Included:
0 Filter housing
0 Housing wrench
Materials Required (not included)
Depends on type, size, and location of pipe on which filter will
be installed. Measure the pipe to determine what size nipples,
union, and valve you will need. Depending on the pipe size, you
will also need to purchase the appropriate size fittings. Consult
your local hardware store to learn more about your particular
installation needs.
0 Bracket with mounting hardware
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of approximately 70 microns.
Particles smaller than 40 microns are not visible with the human eye.
NOTE: Galvanized fittings must be used with galvanized pipe.
Optional Materials
• jumper wire
Filter Housing Specifications
Category
Part #
Model #
Housing Material
Housing O-Ring
Material
Size
In/Out
Temperature
Range (Deg F)
Operating
Pressure
Range
(psi)
City
Water/
Well
Water
Housing (w/PR)
26051
P-H-PR-10-34
Polypropylene (blue)
& AS (clear)
EPDM
2.5"X10"
3/4”
40 to 140
30-100
Both
Housing (w/PR)
26052
P-H-PR-10-34-C/BL
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10”
3/4”
40 to 140
30-100
Both
Housing (w/PR)
26053
P-H-PR-10BV-1
Polypropylene (blue)
& AS (clear)
EPDM
4.5”X10”
1”
40 to 140
30-100
Both
Housing (w/PR)
26055
P-H-PR-10BV-34
Polypropylene (blue)
& AS (clear)
EPDM
4.5” X 10”
3/4”
40 to 140
30-100
Both
Housing (w/PR)-3G
26056
P-H-PR-B-10-34
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10” (3G)
3/4”
40 to 140
30-100
Both
Housing (w/PR)-3G
26058
P-H-PR-B-10-34-C/BL
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10” (3G)
3/4”
40 to 140
30-100
Both
Housing - VIH/PR
26060
P-H-VIH-10-34-C/BL
Polypropylene (blue)
& AS (clear)
EPDM
2.5”X10”
3/4”
40 to 140
30-100
Both
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of approximately 70 microns.
Particles smaller than 40 microns are not visible with the human eye.
*SS = stainless steel threads
76
Filtration Products
Filtration Products
77
Aqua Flo Filter Cartridges
Aqua Flo Filter Accessories
26007 Sump Wrench (new style)
Wrench with six notches. Fits AquaFlo sumps manufactured since January
1993.
92289 Sump Wrench (old style)
Wrench with four notches. Fits Aqua
Flo sumps manufactured prior to 1993.
26023 Mounting Bracket
Convenient bracket with eight screws for mounting the WC34 filter.
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of approximately 70 microns.
Particles smaller than 40 microns are not visible with the human eye.
26049 Aqua Flo Sump and O-Ring
Convenient bracket with eight screws for mounting the WC34 filter.
26022 O-Ring
Buna O-ring seals filter sump and head.
*NOTE: Filter cartridge life varies depending on usage and water conditions
**NOTE: Flow rates measured at 60 psi (4.1 bar)
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair has a diameter of
approximately 70 microns. Particles smaller than 40 microns are not visible with the human eye.
78
Filtration Products
Filtration Products
79
Stainless Steel Housings
Features:
0 Low cost alternative to ROHeavy-duty units for smaller filtration systems and point-of-use applications
0 Brushed 304 stainless steel sump with a cast brass / nickel plated head
0 Ideal for high-pressure / hot water applications
0 Utilizes double open-end cartridges
Accessories
#65020053 Side Stream Filter Assembly
Pre-Assembled SS-1 Housing with stainless steel
shutoffs and stainless steel flow indicator.
‘Side stream filters are primarily used for filtering a
portion of the water in a closed loop boiler system
to protect the boiler, controls and circulating pumps
Dimensions: 14 1/8” (h) x 20 3/4” (w) x 4 1/8” (d)
80
Filtration Products
Chemical Feed Pumps
Pro Chemicals
Test Kits
Mazzei Injectors
John Guest Fittings
81
Chemical Feed Pumps
Chemical Feed Pumps
45 Pump Series Single Head Adjustable Rate
45MHP2
45MHP10
100 psi (6.9 bar)
max 3 gpd (11 lpd)
How it Works
Stenner’s adjustable metering pump is built with three
detachable components: the motor, feed rate control and
pump head. Outputs are dependent upon three factors:
the rpm of the motor gears, the percentage setting on the
feed rate control and the size of the peristaltic pump tube.
All Stenner metering pumps have a 3-point roller design
in the pump head, which acts as a check valve to prevent
back flow, siphoning, overdosing and loss of prime.
100 psi (6.9 bar)
10 max gpd (38 lpd)
Outputs @ 60Hz
Gallons per day:0.2 to 3.0
Gallons per hour: 0.01 to 0.13
Liters per day: 0.8 to 11.4
Liters per hour: 0.03 to 0.48
Ounces per minute: 0.02 to 0.27
Milliliter per minute: 0.56 to 7.92
Outputs @ 50Hz
The motor shaft rotates at a fixed rpm which drives the
adjustable feed rate control to intermittently engage the
roller assembly within the pump head. The chemical solution in the pump tube is captured between the rollers as
they rotate and compress the tube. As the rollers advance,
the squeezed tube section regains its original form and
generates a vacuum, creating the self-priming feature that
delivers a constant flow unaffected by the outlet pressure.
Outputs @ 50Hz
Liters per day: 0.6 to 9.1
Liters per hour: 0.03 to 0.38
Milliliters per minute: 0.31 to
6.32
Liters per day: 1.5 to 30.3
Liters per hour: 0.06 to 1.26
Milliliters per minute: 1.04 to
21.04
Maximum Operating Temperature
Discharge Pressure
26-100 psi (1.7-6.9 bar)
12° F (52° C)
Amp Draw
1.7 120V; 0.9 220V, 230V, 250V
Dimensions (l x w x h)
Advantages:
10.6 x 5.3 x 6.0 in
(26.9 x 13.4 x 15.2 cm)
0 Self-priming up to 25 feet does not lose prime
0 Solutions contained in tube, not exposed to pump components
or air
Voltage
120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International
Motor
shaded pole; 26 rpm; 1/30 HP
Shipping Weight
0 Can pump off-gassing solutions
Outputs @ 60Hz
Gallons per day:0.5 to 10.0
Gallons per hour: 0.02 to 0.42
Liters per day: 1.9 to 37.9
Liters per hour: 0.08 to 1.58
Ounces per minute: 0.04 to 0.89
Milliliter per minute: 1.32 to
26.32
Suction Lift
25’ (7.6 m))
9 lbs (4 kg)
0 Sub-assemblies fit together without tools, easy service or conversion to another model
0 Pump head universal to all Stenner pumps
0 Can run dry without damage
0 Will not clog from dirt or debris
0 Reproducible outputs within 2%
0 Adjustable feed rate control from 5% - 100% in
2.5% increments
0 Pump tubes accept a variety of chemical
0 1 Year Guarantee from date of manufacture
82
Accessories
The patented mechanical feed
rate control allows the pump’s
output to be scaled from 5%
to 100% with the simple turn
of the dial.
Item #
Model
Tube
CDN #
US #
11873
11874
11876
11879
11873
11810
11809
11808
Item #
11873
11874
11876
11879
Description
45MHP2-110v, ¼” tubing
45MHP2-220v, ¼” tubing
45MHP10-110v, ¼” tubing
45MHP10-220v, ¼” tubing
Feed Rate Setting: Outputs per day in US Gallons @ 60Hz
L
1
2
3
4
5
6
7
8
9
10
45MHP2
#1
0.2
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3
45MHP10
#2
0.5
1
2
3
4
5
6
7
8
9
10
Accessories
83
Chemical Feed Pumps
Chemical Feed Pumps
85 Pump Series Single Head Adjustable Rate
Materials of Construction
All Housings: Lexan® polycarbonate plastic
Pump tube & check valve duckbill: Santoprene® FDA
approved
Pump tube: Tygothane® FDA approved
Checkvalve duckbill (w/Tygothane tube): Pellathane®
Suction/discharge tubing & ferrules (1/4” & 6 mm):
LDPE polyethylene,
NSF/FDA approved
Tube fittings, connecting nuts, check valve fitting,
weighted strainer: Type 1 Rigid PVC-NSF listed
All fasteners: Stainless Steel
Lexan® is a registered trademark of General Electric.
Santoprene® is a registered trademark of Advanced
Elastomer system
Tygothane® is a registered trademark of Saint-Gobain
Performance Plastics
Pellathane® is a registered trademark of The Dow
Company
How it Works
Stenner’s fixed output metering pump is built with two detachable components: the motor and pump head. Outputs
are dependent upon the rpm of the motor gears and the
size of the peristaltic pump tube.
The fixed rate pump has no output adjustment. All Stenner
metering pumps have a 3-point roller design in the pump
head, which acts as a check valve to prevent back flow,
siphoning, overdosing and loss of prime.
The motor’s output shaft rotates at a fixed rpm which
drives the roller assembly within the pump head. The
chemical solution in the pump tube is captured between
the rollers as they rotate and compress the tube. As the
rollers advance, the squeezed tube section regains its original form and generates a vacuum, creating the self-priming
feature that delivers a constant flow unaffected by the
outlet pressure.
Advantages:
0 Solutions contained in tube, not
exposed to pump components or air
0 Subassemblies fit together without
tools; easy service or conversion to another model
0 Reproducible outputs within 2%
Amp Draw
1.7 120V; 0.9 220V, 230V,
250V
0 Pump tubes accept a variety of
chemicals
Tube
Accessories shipped with each pump
3 connecting nuts ¼” or 3/8”
3 ferrules ¼” & 6 mm or 2 ferrules 3/8”
1 injection check valve
1 weighted strainer
1 20’ roll of suction/discharge tubing ¼” or 3/8” white or UV
black or 6 mm (Europe) white
1 spare pump tube
1 mounting bracket
1 installation manual
Dimensions (l x w x h)
10.6 x 5.3 x 6.0 in
(26.9 x 13.4 x 15.2 cm)
Voltage
Voltage 120V 60Hz; 220V
60Hz230V
50Hz; 250V 50Hz International
0 Adjustable feed rate control from 5%-
100% in 2.5% increments
Shipping Weight
9 lbs (4 kg)
Feed Rate Setting: Outputs per day in US Gallons @ 60Hz
L
1
2
3
4
5
6
7
8
9
10
0.3
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
CDN #
US #
11880
11872
11852
11853
Item #
11880
11872
Description
STENNER-PUMP-85MHP5-110
STENNER-PUMP-85MHP5-220
Accessories
125° F (52° C)
Discharge Pressure
26-100 psi (1.7-6.9 bar)
0 Will not clog from dirt or debris
84
Maximum Operating
Temperature
Outputs @ 50Hz
0 Can run dry without damage
#1
Suction Lift
25’ (7.6 m)
Liters per day: 2.4 to 51.5
Liters per hour: 0.10 to 2.15
Milliliters per minute: 1.67 to
35.76
0 Pump head universal to all Stenner pumps
85MHP5
Motor
shaded pole; 44 rpm;
1/30 HP
Gallons per day: 0.8 to 17.0
Gallons per hour: 0.03 to 0.71
Liters per day: 3.0 to 64.4
Liters per hour: 0.13 to 2.68
Ounces per minute: 0.07 to 1.51
Milliliter per minute: 2.08 to 44.65
0 Can pump off-gassing solutions
Model
Santoprene®: UL, CSA , CE, NSF-50, NSF-61
Tygothane®: UL, CSA, CE
Outputs @ 60Hz
0 Self-priming up to 25 feet and does not lose prime
Item #
Agency listings
Accessories
85
Flow Switch (Low Flow Rate – SPDT)
Stenner Pump Control Module
Description:
How It Works:
For use on liquid lines using water, ethylene glycol
solutions, or other liquids not corrosive to the brass
or phosphor bronze parts. The SPDT contact switch is
activated by a low flow rate; however, it has a large flow
capacity with a minimum pressure drop.
The Pump Control Module (PCM) is a component
of the proportional feed system, which delivers
repeatable doses regardless of the system’s flow
rate. The system is used in applications requiring
proportional chemical injection.
Applications:
F61KD-4
0 Water purification and treatment systems
0 Booster pumps
The proportional feed system, Stenner refers to as
the PCM system consists of three components:
0 Fast shutdown on high input boilers to
guard against circulation failure
0 PCM – pump control module
0 Cooling systems for electronic tubes,
bearings, and compressors
0 Dry contact water meter
Item #
99000070
Description
F61KD-4C Flow Switch
(Low Flow Rate - SPDT)
Inlet and Outlet Size Female
NPT
3/4” x 3/4” (19mm x 19mm)
0 Single head fixed output pump (45 or 85 model)
Enclosure
NEMA
Type
1
Adjustment Range - GPM (L/Min)
Maximum
Liquid Temp
Minimum
Liquid Temp
Maximum
Liquid Pressure
250°F (121°C)
32°F (0°C)
150 psig (1034 kPa)
R to Y Closes Flow R to Y Opens Flow
Increase
Decrease
Min 0.6 (2.27)
Max 1.1 (4.17)
Min 0.3 (1.14)
Max 0.9 (3.4)
The water meter sends a pulse signal to the PCM
which activates the pump to deliver the desired
dose based on water volume. The PCM turns on
the pump for the set duration determined to
inject the solution into the water line.
Dimensions
5 1/32” h x 4” w x 2 13/16” d
127mm x 102mm x 71mm)
Electrical
Horsepower
AC Full Load A
AC Locked Rotor A
Non-Inductive or Resistance Load A
Pilot Duty
120 VAC
1
16
96
16
125 VA, 24/277 VAC
Pulsafeeder Kopkit
Water Meters
Features:
0 Reed switch
0 Dry contact
0 Power not required
Material:
0 Body: Cast bronze
0 Internal: Engineered thermoplastic
0 Magnet: Alnico
Kopkit®
Available for every model, the KOPkit provides an
economically priced package of parts required for
routine maintenance. The kit typically contains
new valve cartridges with o-rings, head,
diaphragm, secondary o-ring seal, head screws and
washers.
86
Accessories
Water Meters
Item #
Size
B Body w Couplings C IPS Thread
3/4”
7 1/2” (19.1 cm)
1”
10 1/4” (26.0 cm)
1 1/2” 11 3/4” (29.9 cm)
2”
11 3/4” (29.9 cm)
Min Flow
Description
Meter, Contacting Stenner WM0751G 3/4” 1Gallon/Pulse
Meter, Contacting Stenner WM1001G 1” 1Gallon/Pulse
80060052 Meter, Contacting, 1.5” 1.0 GPC, 404(Gal/Contact)
80060053 Meter, Contacting, 2.0” 1.0 GPC, 504(Gal/Contact)
80060050
80060051
27399
A Body
12 5/8” (32.1 cm)
1” (2.5 cm)
3/4” (1.9 cm)
15 5/8” (36.7 cm) 1 1/4” (3.2 cm) 1” (2.5 cm)
17 5/8” (44.8 cm)
2” (5.1 cm) 1 1/2” (3.8 cm)
17 5/8” (44.8 cm) 2 1/2” (6.4 cm) 2” (5.1 cm)
Max Flow
(Gallons Per Minute)
0.22
0.44
0.88
1.98
D NPT Thread
22
52
88
132
Max Operating
Temp
Max Operating
Pressure
105 F (40 C)
105 F (40 C)
105 F (40 C)
105 F (40 C)
150 psi
150 psi
150 psi
150 psi
Timer, Stenner, Pump Control Module 5, 0.5 to 5.0 seconds
Accessories
87
Retention Tanks
Chemicals
Made from a unique 3 piece internal construction that allows for consistent engineered dome profiles and integrally bonded connections
that lead to longer tank life. Its heavy duty base is molded out of ABS
for maximum strength and durability. And, It has a removable
schedule 80 PVC bottom connection that can be “accessorized” for
increased installation flexibility.
0 Durable PVC water connection.
0 Flexwave tanks are made in the USA and built to comply with
NSF/ANSI Std 61
0 5 year warranty
FWC Contact Retention Tanks - Dimensions & Capacities
Model
FWC 30
FWC 40
FWC 40 SQ
FWC 80
FWC 120
Item #
33201-1
33202-1
33203-1
33204-1
33205-1
Total Tank Volume
Gallons
30
40
40
80
120
Litres
114
151
151
303
454
Height
In
42.5
53.4
36.9
64.1
71.5
Cm
108
135.6
93.8
162.8
181.6
Diameter
In
16.5
16.5
21.4
21.4
24.2
Cm
41.8
41.8
54.2
54.2
61.4
Socket Glue Connection
1 1/4”schd-80
1 1/4”schd-80
1 1/4”schd-80
1 1/4”schd-80
1 1/4”schd-80
FPT
1
1
1
1
1
1/4”
1/4”
1/4”
1/4”
1/4”
Total Weight
Lbs
23.0
31.0
33.1
60.0
83.5
Kilos
10.4
14.1
15.0
27.0
38.0
Maximum working temperature, internal & external 120F. Materials of Construction: Tank top and bottom domes injection molded copolymer polypropylene. Shell
extruded polypropylene. Outer shell composite construction with fiberglass coated with epoxy resin. Base is injection molded ABS. Top and side ports are stainless
steel reinforced.
BAF Mixing Tank - Dimensions & Capacities
Model
BAF 80
BAF 120
Item #
33217
33211
Total Tank Volume
Gallons
Litres
80
303
119
450
Height
In
Cm
64.1
163
71.5
182
Diameter
In
Cm
21.4
54.4
21.4
54.4
Outlet Connection
Thread Connec- at top of tank
tion
1 1/4”NPT
1 1/4” FPT
1 1/4”NPT
1 1/4” FPT
Total Weight
Lbs
Kilos
23.0
10.4
31.0
14.1
Maximum working pressure 100 PSI. Maximum working temperature, internal & external 120F. Materials of Construction: Copolymer polypropylene wrapped with
fiberglass coated with epoxy resin. Base is rigid ABS. Inner baffle is a copolymer polypropylene with a PVC sch 40 standpipe and diffuser cap. Top port is stainless steel
reinforced and bottome connections are a 1 1/4” NPT schedule 80- connection
Mixing Tanks
Sani-System Liquid Sanitizer Concentrate
Sani-System is the only EPA & NSF approved sanitizer for use in water softeners and reverse osmosis units. It’s
proven to kill 99.99% of harmful bacteria without the use of chlorine, oxidizers or acids that can harm system
equipment parts and resin. The exact pre-measured doses of concentrated formula are contained in Ready-ToUse packets and sanitize equipment in 60 seconds!
Simple to Use:
For water softeners it is as simple as pouring into the brine well or brine tank and manually regenerating the unit.
For reverse osmosis units, simply remove the cartridges and place the packet contents in the first housing and
flush. Sani-System is the only sanitizer on the market proven by the WQA to safely sanitize an RO unit membrane.
User Benefits:
Technical Information:
0 Faster, easier and safer than other alternative
sanitizers
0 Sani-System is a clear liquid and will react to
oxidizers
0 Easy & reliable single dose packages
0 Routine storage. Rubber gloves are suggested
when handling. Read all relevant MSDS before
handling.
0 99.99% effective kill rate against harmful bacteria
The Mixmaster(BAF) Series tanks are a retention tank with an
internal baffle and diffuser which improves mixing and
increases the retention time improving the effectiveness of
chemi- cal treatment of water for disinfection or mineral
removal. Great for killing bacteria or for agricultural applications.
0 Polypropylene tank reinforced with fiberglass sealed with epoxy resin.
0 Only sanitizer on market proven by WQA to sanitize membrane
Item #
50035
50032
0 Do not mix with other chemicals
0 Certified to NSF/ANSI 60 Standards
Description
Sani-System RO Sanitizer 0.25 fl.oz (24 Packets)
Sani-System Water Softener Sanitizer 0.5 fl.oz (24 Packets)
0 Cross- link polyethylene upper and lower water chamber. Standpipe and diffuser 1-1/4”pvc sch 40
88
Accessories
Accessories
89
Chemicals
Chemicals
Pro Chemicals
Pro Chemicals provides a diverse portfolio of water softener
cleaners designed to clean, restore and maintain the life of water
softeners. These products are formulated to treat water softeners
with iron or for daily preventative maintenance.
Easy Feeder
The Pro Easy Feeder automatically dispenses the right amount of
Pro Res Care Cleaning Solution to maintain water softener efficiency.
The Pro Easy Feeder is non-electric and easy to install and use. For
use with 64 oz bottles of Res Care.
Rust Out® Water softener Cleaner/iron remover
Rust Out® chemically removes iron and rust build-up that coats the
resin bead and fouls the water softener. Rust Out changes rust and
iron into a clear solution that easily rinses away and does not
contain harsh or abrasive chemicals that damage fiberglass, porcelain or acrylic finishes. The advanced formula contains more than
five chemicals that are formulated to clean, restore and maintain
the life of water softeners. Rust Out can also be used to clean tough
rust stains from toilets, sinks, tubs, white clothes and exterior surfaces.
Item #
45126
45127
45128
Description
Rust Out - 1.5 lb. Bottle
Rust Out - 5 lb. Bottle
Rust Out - 50 lb Pail
Item #
Description
55030005 Easy Feeder - 0.5 oz/day Feeder
55030006 Easy Feeder - 1.0 oz/day Feeder
Pot® Perm Greensand Iron Filter Regenerant
The Pro Easy Feeder automatically dispenses the right amount of
Pro Res Care Cleaning Solution to maintain water softener efficiency.
The Pro Easy Feeder is non-electric and easy to install and use. For
use with 64 oz bottles of Res Care.
Res Care® liquid Resin Cleaning Solution
Res Care® is a specially formulated liquid cleaner designed to
remove limited iron, manganese, silt, metal particles and organic
compounds that cause softener inefficiencies. Regular use of Res
Care will restore the softener back to peak efficiency and
maintain the life of the unit. For best results use a Res Care
Automatic Feeder or manually add during regeneration to
prevent mineral build-up.
Item #
45143
45145-1
50010
Description
Pot Perm - 5 Lb. Bottle
Pot Perm - 10 Lb. Bottle
Pot Perm - 55 Lb. Bottle
Item #
Description
45147
Res Care - 1 gal. (128 oz) Bottle
80030022 Res Care - 64 oz Bottle (Easy Feeder Refill)
45148
Res Care - 1 qt. (32 oz) Bottle
90
Accessories
Accessories
91
Chemicals
Media-properties
Ban T® Alkaline Water Neutralizer
Ban T® (formerly called Pro-Citric Acid) is specifically
formulated to effectively lower pH and remove iron and
other contaminants from fouled water softeners. Ban T
should be used as preventative maintenance on all water
softeners in areas with moderate iron content to clean,
restore and maintain the life of the softener. Ban T is an
environmentally-friendly cleaning agent that removes hard
water deposits and moderate iron staining from
household fixtures.
Item #
45138
Anthracite
The coal is cleaned (reduction in ash content),
screened and classified to the proper sizes for
water filtration purposes. Advantages: Versus
silica and quarts sands and gravels are longer runs
between backwashes, higher flow rates without
headloss, lower backwash water pressures and/or
quantities, a greater utilization of the bed mass for
filtration, and a volumetric higher surface area.
Description
Ban T - 1.5 lb. Bottle
Neutra 7® Acid Water Neutralizer®
Neutra 7® (formerly called Pro Soda Ash) is a proprietary alkaline
blend which neutralizes acid water and keeps the injection point
clean. This helps to eliminate corrosion of piping, pressure tanks,
water heaters and fixtures without the hassle of constant
cleaning of calcium build-up.
Item #
45157
45158
92
Accessories
Activated Carbon
Activated carbon, also called activated charcoal or
activated coal, is a form of carbon that has been
processed to make it extremely porous and thus
to have a very large surface area available for
adsorption or chemical reactions. Due to its high
degree of microporosity, just one gram of activated
carbon has a surface area of approximately 500 m2
(or about 217 tennis courts). Carbon absorbs
organic compounds which produce taste, odor,
color or toxicity and reduces free chlorine.
Description
Neutra 7 - 7 Lb. Bottle
Neutra 7 - 40 Lb. Pail
Garnet
A naturally hard, durable, high specific gravity
mineral. Resistance to attrition means less loss of
media and shutdown time. High specific gravity
means more control during backwash and lower
losses to drain. The angular shape provides more
ability to filter and longer production runs.
Manganese Greensand
Black nodular granules of manganese-coated
natural greensands – used for removing soluble
iron and/or manganese as well as hydrogen
sulfide. It must be either continuously or
periodically regenerated with potassium
permanganate.
Gravel
Gravel is used as a support to keep smaller media
out of the distribution system and to stop
channelling of water. Minimum layers of 3” per
size is suggested.
Birm®
Birm® is an efficient and economical media for the
reduction of dissolved iron and manganese
compounds from raw water supplies. It may be
used in either gravity fed or pressurized water
treatment systems. Birm acts as an insoluble
catalyst to enhance the reaction between
dissolved oxygen and the iron compounds. In
ground waters, the dissolved iron is usually in the
ferrous bicarbonate state due to the excess of free
carbon dioxide and is not filterable. Birm, acting as
a catalyst between the oxygen and the soluble iron
compounds, enhances the oxidation reaction of
Fe++ to Fe+++ and produces ferric hydroxide which
precipitates and may be easily filtered.
The physical characteristics of Birm provide an
excellent filter media which is easily cleaned by
backwashing to remove the precipitant. Birm is not
consumed in the iron removal operation and
therefore offers a tremendous economic
advantage over many other iron removal methods.
Calcium Carbonate (also known as Calcite)
Acidic waters on contact slowly dissolve the
calcium carbonate media to raise the pH which
reduces the potential leaching of copper, lead and
other metals found in typical plumbing systems.
Periodic backwashing will prevent packing and
maintain high service rates.
Depending on pH and service flow the bed will
have to be periodically added to as the dissolved
calcium carbonate depletes. As the calcium
carbonate neutralizes the water, it will increase
hardness and a softener may become necessary
after the neutralizing filter.
Filter Ag®
Advantages: Less pressure loss than through most
other media. Light weight requires lower backwash
rates. High service rates. High dirt removal
capacity. Reduced shipping cost due to light
weight/cu.ft.
Accessories
93
Hach Test Kits
Media
#202300
Item Number
31501
33016
32376
22018
30404-2
25006
22022C
30401C
22018C
22023C
32380
22502
22503
22003
22002
22001
22006
52000
22510
21494
21491
21486
21502
21501
21499
21510
21512
22004
94
Accessories
Description
Anthrafilt #1
Birm, 1 CF
Calcite, 50 pound bag, 90#/CF
Carbon Centaur, 12 x 40, 1 CF Bag
Carbon, Coconut Shell 12X40, 1CF Bag
Carbon, Hydrodarco 3000, 1240, 1.66 CF Bag
Carbon, Jacobi Aquasorb CS LF, 12 X 40, 1 cu ft
Carbon, Jacobi Aquasorb CS LF, 20 X 50, 1 cu ft
Carbon, Jacobi Aquasorb CX MCA, 12 X 40, 1 cu ft
Carbon, Jacobi Aquasorb HS LF, 12 X 40, 1 cu ft
Corosex, 50 pound bag, 75#/CF
Garnet 30X40 50# bag, 130 #/CF
Garnet 8X12 50# bag, 140#/CF
Gravel, 1/2 x 1/4
Gravel, 1/4 x 1/8
Gravel, 1/8 x 1/16
Gravel, 3/4 x 1/2
Greensand Plus, 1/2 Cubic foot bag
Nexsand 1 CF
Resin, Anion A850
Resin, Anion A860
Resin, Anion, A300
Resin, Aquafine 8% Cation
Resin, Cation, C100E
Resin, Cation, C100EFM
Resin, Cation, C150E
Resin, SSTC 60
Sand, 0.45 x 0.55
U of M
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
BG
Weight
52
36
50
33
27.5
40
27.5
27.5
27.5
27.5
50
50
50
100
100
100
100
85
52
43
43
43
52
52
52
52
50
100
#49018
#66751
Item #
Description
49145300
5B HARDNESS KIT - 0-30 GPG
301227
BUFFER SOLUTION HARDNESS 3 ,100 ML MDB 42432
49225401
CN65 TOTAL/FREE CHLORINE KIT
492060300
DPD FREE CHLORINE PP 5ML PK/100.,14077-99
492060400
DPD TOTAL CHLORINE PP 5ML PK/100. 14076-99
49183701
HA62A HARDNESS, IRON, pH KIT
301228
HARDNESS 2 TEST SOLUTION,100 ML MDB 42532
301226
HARDNESS 3 TEST SOLUTION,100 ML MDB
49018
HS-C HYDROGEN SULPHIDE KIT (0 - 5 MG/L)
66751
METER TDS MYRON L 0-5000 PPM 512M5
49146700
MN5 MANGANESE (0-3 MG/L) KIT
80050020
PAPER, HYDROGEN SULFIDE 100
66761
PH/TEMP METER, pH-200, 0-14 pH
80050007
PH/TEMP WATERPROOF HYDRO TESTER, PH-80
4998366
PILLOW, BUFFER CITRATE POWDER PK/100
301233
PILLOW, FERROUS IRON REAGENT POWDER PK/100
4985199
PILLOW, HARDNESS INDICATOR POWDER PK/100 Manver 2
4998499
PILLOW, SODIUM PERIODATE POWDER PK/100
33004
SOAP TEST KIT
4942411
SOLUTION, HARDNESS 1, 500 ML
4942511
SOLUTION, HARDNESS 2, 500 ML
4942616
SOLUTION, HARDNESS 3, 500 ML
49193701
TA3 TANNIN - LIGNIN KIT
49022
TABLETS, ALKASELTZER 36
80050008
TDS-4 POCKET SIZE METER, HM DIGITAL
49016
TEST KIT COMBINATION DEALER 2496101
202300
TEST KIT, HA-77 HARDNESS & IRON
80050052
UNIVER 3 POWDER 28.3 GRAMS 213-20H
301518
UNIVER 3 POWDER PILLOWS,PK/100
80050038
WIDE RANGE 4 pH SOLUTION
#4918370
NEW Dealer Combination Kit –
Hardness, iron,
sulphur, pH,Manganese, TDS
#49016
#49145300 hach 5b hardness test Kit 1 – 30 gpg
Trust the original Hach test kit! Simple drop count
Titration measures hardness as CaCo3
(1 gpg = 17.1 mg / l). 100 tests.
Accessories
95
Spectrum Test Kits (U.S. Only)
Mazzei Injectors
Mazzei® Injectors are high-efficiency, venturi-type, differential pressure injectors with internal mixing vanes. When a sufficient pressure
difference exists between the inlet and outlet ports of the injector, a
vacuum is created inside the injector body, which initiates suction of
a liquid or gas through the suction port.
:DWHU)ORZ
VXFWLRQ
0D]]HL
Basic Kit Hardness
How a Mazzei® Injector Works
863DWHQW
,QWHUQDWLRQDO3DWHQWV
Item #
Description
80040001
Injector, Mazzei, 384-PP, ½” Inlet / Outlet
80040002
Injector, Mazzei, 484A-PP, ¾” Inlet / Outlet
80040003
Injector, Mazzei, Bypass Kit 384-PP, ½” Inlet / Outlet
80040004
Injector, Mazzei, Bypass Kit 484A-PP, ¾” Inlet / Outlet
When pressurized water enters the injector inlet, it is constricted
toward the injection chamber and changes into a high-velocity jet
stream. The increase in velocity through the injection
chamber results in a decrease in pressure, thereby enabling an additive material to be drawn through the suction port and entrained
into the water stream. As the jet stream is diffused toward the injector outlet, its velocity is reduced and it is reconverted into pressure
energy (but at a pressure lower than injector inlet pressure).
Mazzei® Injectors are extremely efficient. They operate over a wide
range of pressures and require only a minimal pressure differential
between the inlet and outlet sides to initiate a vacuum at the
suction port.
Mattson / Witt K7225 Eductor
Standard Kit Hardness,
Iron, pH & Chlorine
Used for iron removal - the K7225 Eductor is used in combination
with an aeration tank and a backwashable filter containing special
media adds a controlled amount of air to the water supply just
before it enters the aeration tank. As the water sprays into the
aeration tank it picks up more air. The oxygen in the air starts the
natural iron removal process by oxidizing the iron and causing it to
come out of solution. The iron can then be more easily filtered.
Deluxe Kit Hardness,
Iron, pH,Chlorine & TDS
96
Accessories
Accessories
97
Tubing & Fittings
(John Guest Quick Connect)
Tubing & Fittings (John Guest Quick Connect)
Part #
Polypropylene Fittings
The PP Range of inch-size push-in fittings is offered for tube sizes
1/4” O.D. to 1/2” O.D. The fittings are manufactured in white
polypropylene with food grade EPDM O-rings. They have been
developed to satisfy the compatibility needs for a wide range of
applications.
Model Description
Male Connector - NPTF Thread
CI010821W
1/4” X 1/8”-WHITE, (10 Pack)
CI010822W
1/4” X 1/4”-WHITE, (10 Pack)
CI010823W
1/4” X 3/8”-WHITE, (10 Pack)
CI011222W
3/8” X 1/4”-WHITE, (10 Pack)
PI010821S
1/4” X 1/8”, (10 Pack)
PI010822S
1/4” X 1/4”, (10 Pack)
Min. 33˚F/1˚C
PI010823S
1/4” X 3/8”, (10 Pack)
PI011221S
3/8” X 1/8”, (10 Pack)
Polypropylene Shut-Of Valve
PI011222S
3/8” X 1/4”, (10 Pack)
PI011223S
3/8” X 3/8”, (10 Pack)
PI011224S
3/8” X 1/2”, (10 Pack)
PI011623S
1/2” X 3/8”, (10 Pack)
PI011624S
1/2” X 1/2”, (10 Pack)
PI012026S
5/8” X 3/4”, (10 Pack)
PP010822W
/4” X 1/4”-WHITE, (10 Pack)
Working Pressures and Temperatures
Water Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C)
Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C)
The PPSV Range of Shut-Off Valve is offered for tube sizes ¼”
O.D. and 3/8” O.D., produced in polypropylene and fitted with
EPDM O-rings. Polypropylene has the advantage of being more
chemically resistant than acetal. The valves are for use with
potable water. For use with other potable liquids please contact
our Technical Support Department for guidance. The valves are
not to be used with compressed air, explosive gases, petroleum
spirits and other fuels or for heating systems.
PP010823W
1/4” X 3/8”-WHITE, (10 Pack)
PP011222W
3/8” X 1/4”-WHITE, (10 Pack)
PP011223W
3/8” X 3/8”, (10 Pack)
PP011224W
Water Max. 150 psi at 70˚F (Max. 10 bar at 20˚C)
3/8” X 1/2”, (10 Pack)
PP011623W
1/2” X 3/8”, (10 Pack)
Max. 60 psi at 140˚F (Max. 4 bar at 60˚C)
PP011624W
Working Pressures and Temperatures
Min. 33˚F/1˚C
1/2” X 1/2”, (10 Pack)
Male Connector - Flare Male Connector (tube X thread)
PI0108F4S
1/4” X 1/4”, (10 Pack)
Polypropylene Fittings
PI0112F4S
3/8” X 1/4”, (10 Pack)
The John Guest PE Range of plastic tubing is produced in Linear Low Density
Polyethylene for cold and intermittent hot water applications. Our tubing is made
from FDA compliant materials and is NSF International Standard 51 & 61
certified. John Guest LLDPE Tubing provides excellent resistance to environmental
stress cracking as measured by ASTM D-1693 (10% IGEPAL). John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit push-in fittings,
John Guest Shut-Off Valves and virtually all standard tubing connectors.
PI0112F6S
3/8” X 3/8”, (10 Pack)
PI0112F8S
3/8” X 1/2”, (10 Pack)
PI0116F8S
1/2” X 1/2”, (10 Pack)
Union Tee (for use when branching of - RO faucets & tanks )
CI0208W
1/4” - WHITE, (10 Pack)
CI0212W
3/8” - WHITE, (10 Pack)
PI0208S
1/4”, (10 Pack)
PI0212S
3/8”, (10 Pack)
PI0216S
1/2”, (10 Pack)
PP0208W
1/4”, (10 Pack)
PP0212W
3/8”, (10 Pack)
Reducing Tee (tube x tube x branch )
PI301208S
PI301612S
PP30121208W
PP301612W
98
Accessories
Union Elbow (tube)
3/8” X 3/8” X 1/4”, (10 Pack)
1/2” X 1/2” X 3/8”, (10 Pack)
3/8” X 3/8” X 1/4”, (10 Pack)
1/2” X 1/2” X 3/8”, (10 Pack)
CI0308W
1/4” - WHITE, (10 Pack)
CI0312W
3/8” - WHITE, (10 Pack)
PI0308S
1/4”, (10 Pack)
PI0312S
3/8”, (10 Pack)
PI0316S
1/2”, (10 Pack)
PP0308W
1/4”, (10 Pack)
PP0312W
3/8”, (10 Pack)
PP0316W
1/2”, (10 Pack)
Fixed Elbow (NPTF Thread - tube X thread)
CI480821W
CI480822W
CI480823W
CI481222W
PI480821S
PI480822S
1/4” X 1/8” - WHITE, (10 Pack)
1/4” X 1/4” - WHITE, (10 Pack)
1/4” X 3/8” - WHITE, (10 Pack)
3/8” X 1/4” - WHITE, (10 Pack)
1/4” X 1/8”, (10 Pack)
1/4” X 1/4”, (10 Pack)
PI480823S
1/4” X 3/8”, (10 Pack)
PI481222S
3/8” X 1/4”, (10 Pack)
PI481223S
3/8” X 3/8”, (10 Pack)
PI482024S
5/8” X 1/2”, (10 Pack)
PP480821W
1/4” X 1/8”, (10 Pack)
PP480822W
1/4” X 1/4”, (10 Pack)
PP480823W
1/4” X 3/8”, (10 Pack)
PP481222W
3/8” X 1/4”, (10 Pack)
PP481223W
3/8” X 3/8”, (10 Pack)
Reducing Elbow (tube X tube)
PI211208S
3/8” X 1/4”, (10 Pack)
PI211612S
1/2” X 3/8”, (10 Pack)
PP211208W
3/8” X 1/4”, (10 Pack)
PP211612W
1/2” X 3/8”, (10 Pack)
Plug In/Stem Elbow (stem X tube)
CI220808W
CI221208W
CI221212W
PI220808S
PI221208S
PI221212S
PI221616S
PP220808W
PP221208W
PP221212W
PP221616W
1/4” X 1/4” - WHITE, (10 Pack)
3/8” X 1/4” - WHITE, (10 Pack)
3/8” X 3/8” - WHITE, (10 Pack)
1/4” X 1/4”, (10 Pack)
3/8” X 1/4”, (10 Pack)
3/8” X 3/8”, (10 Pack)
1/2” X 1/2”, (10 Pack)
1/4” X 1/4”, (10 Pack)
3/8” X 1/4”, (10 Pack)
3/8” X 3/8”, (10 Pack)
1/2” X 1/2”, (10 Pack)
Accessories
99
Tubing & Fittings
Union Connector(tube X tube)
CI0408W
1/4” - WHITE, (10 Pack)
CI0412W
3/8” - WHITE, (10 Pack)
PI0408S
1/4”, (10 Pack)
PI0412S
3/8”, (10 Pack)
PI0416S
1/2”, (10 Pack)
PP0408W
1/4”, (10 Pack)
PP0412W
3/8”, (10 Pack)
PP0416W
1/2”, (10 Pack)
Reducing Union (union X tube X tube)
PI201208S
3/8” X 1/4”, (10 Pack)
PI201612S
1/2” X 3/8”, (10 Pack)
PP201208W
3/8” X 1/4”, (10 Pack)
PP201612W
1/2” X 3/8”, (10 Pack)
Stem Adaptor (NPTF Thread - stem X thread)
CI050821W
1/4” X 1/8” - WHITE, (10 Pack)
CI050822W
1/4” X 1/4” - WHITE, (10 Pack)
CI051222W
3/8” X 1/4” - WHITE, (10 Pack)
CI051223W
3/8” X 3/8” - WHITE, (10 Pack)
PI050821S
1/4” X 1/8”, (10 Pack)
PI050822S
1/4” X 1/4”, (10 Pack)
PI051222S
3/8” X 1/4”, (10 Pack)
PI051223S
3/8” X 3/8”, (10 Pack)
PI051623S
1/2” X 3/8”, (10 Pack)
PI051624S
1/2” X 1/2”, (10 Pack)
PP050821W
1/4” X 1/8”, (10 Pack)
PP050822W
1/4” X 1/4”, (10 Pack)
PP051222W
3/8” X 1/4”, (10 Pack)
PP051223W
3/8” X 3/8”, (10 Pack)
PP051623W
1/2” X 3/8”, (10 Pack)
PP051624W
1/2” X 1/2”, (10 Pack)
Stem Reducer (stem X thread)
CI061208W
3/8” X 1/4” - WHITE, (10 Pack)
PI061208S
3/8” X 1/4”, (10 Pack)
PI061612S
1/2” X 3/8”, (10 Pack)
PP061208W
3/8” X 1/4”, (10 Pack)
PP061612W
1/2” X 3/8”, (10 Pack)
Bulkhead Union (tube X mounting hole diameter)
CI1208W
PI1208S
PI1212S
PI1216S
PP1208W
PP1212W
100
1/4” - 0.67 - WHITE, (10 Pack)
1/4” - 0.67, (10 Pack)
3/8” - 0.83, (10 Pack)
1/2” - 1.06, (10 Pack)
1/4” - 0.67, (10 Pack)
3/8” - 0.83, (10 Pack)
Accessories
(John Guest Quick Connect)
Tubing & Fittings (John Guest Quick Connect)
PP1216W
1/2” - 1.06, (10 Pack)
Reducing Bulkhead Union (tube X tube X mounting hole diameter)
Cross (tube)
PI121208S
3/8” X 1/4” - 0.83, (10 Pack)
PP121208W
3/8” X 1/4” - 0.83, (10 Pack)
Faucet Connector UNS Thread (tube X thread)
PI4712S
3/8”, (10 Pack)
PI2312S
3/8”, (10 Pack)
PP2312W
3/8”, (10 Pack)
Locking Clip (tube)
CI3208U7S
1/4” X 7/16”, (10 Pack)
CI3212U7S
3/8” X 7/16”, (10 Pack)
PP3208U7W
1/4” X 7/16”, (10 Pack)
PP3212U7W
3/8” X 7/16”, (10 Pack)
Stem to Hose Barb (stem X hose barb)
PI250808S
1/4” X 1/4”, (10 Pack)
PI251208S
3/8” X 1/4”, (10 Pack)
PI251212S
3/8” X 3/8”, (10 Pack)
PI251216S
3/8” X 1/2”, (10 Pack)
PP251212W
3/8” X 3/8”, (10 Pack)
PP251216W
3/8” X 1/2”, (10 Pack)
PP251612W
1/2” X 3/8”, (10 Pack)
PP251616W
1/2” X 1/2”, (10 Pack)
Stem to Hose Barb Long Version (stem X hose barb)
PI251212SL
3/8” X 3/8”, (10 Pack)
PI290808S
1/4” X 1/4”, (10 Pack)
PI291208S
3/8” X 1/4”, (10 Pack)
Female Connector NPTF Thread (tube X thread)
PI450822S
1/4” X 1/4”, (10 Pack)
PI451222S
3/8” X 1/4”, (10 Pack)
PP450822W
1/4” X 1/4”, (10 Pack)
PP451222W
3/8” X 1/4”, (10 Pack)
Female Flare Connector FFL (tube X thread)
PI4512F4S
PI4512F6S
Plug (stem)
PI0808S
PI0812S
PI0816S
PP0808W
PP0812W
PP0816W
End Stop (tube)
3/8” X 1/4”, (10 Pack)
3/8” X 3/8”, (10 Pack)
PI4608S
PI4612S
1/4”, (10 Pack)
3/8”, (10 Pack)
1/4”, (10 Pack)
3/8”, (10 Pack)
1/2”, (10 Pack)
1/4”, (10 Pack)
3/8”, (10 Pack)
1/2”, (10 Pack)
PIC1808R
PIC1812R
PE Tubing - 1/4” 500 feet - 2 rolls per box
1/4”, (10 Pack)
3/8”, (10 Pack)
Collets (tube)
CP-C081-DG
CP-C121-DG
CP-C161-DG
Tube Cutter
JG 1/4” COLLET - GREY, (10 Pack)
JG 3/8” COLLET - GREY, (10 Pack)
JG 1/2” COLLET - GREY, (10 Pack)
TSNIP
JG-TS
Tank Ball Valves
TUBE CUTTER,
TUBE CUTTER (up to 22mm),
PPSV500822W
PPSV501222W
Inline Ball Valves
1/4” JG X 1/4” FEMALE NPTF ELBOW,
3/8” JG X 1/4” FEMALE NPTF ELBOW,
PE-08-BI-0500F-B BLUE, Comes per box
PE-08-BI-0500F-E BLACK, Comes per box
PE-08-BI-0500F-G GREEN, Comes per box
PE-08-BI-0500F-N NATURAL, Comes per box
PE-08-BI-0500F-O ORANGE, Comes per box
PE-08-BI-0500F-R RED, Comes per box
PE-08-BI-0500F-V VIOLET, Comes per box
PE-08-BI-0500F-W WHITE, Comes per box
PE-08-BI-0500F-Y YELLOW, Comes per box
PE Tubing - 3/8” 500 feet
PE-12-EI-0500F-B BLUE, Comes per box
PE-12-EI-0500F-E BLACK, Comes per box
PE-12-EI-0500F-G GREEN, Comes per box
PE-12-EI-0500F-N NATURAL, Comes per box
PE-12-EI-0500F-O ORANGE, Comes per box
PE-12-EI-0500F-R RED, Comes per box
PE-12-EI-0500F-V VIOLET, Comes per box
PE-12-EI-0500F-W WHITE, Comes per box
PE Tubing - 1/2” 250 feet
PE-16-GI-0250F-B BLUE, Comes per box
PE-16-GI-0250F-E BLACK, Comes per box
PE-16-GI-0250F-N NATURAL, Comes per box
PE-16-GI-0250F-R RED, Comes per box
CTS PEX Tubing - 1/2” 100 feet
US1/2PEX-100F-B BLUE, Comes per box
US1/2PEX-100F-R RED, Comes per box
US1/2PEX-100F-W WHITE, Comes per box
CTS PEX Tubing - 3/4” 100 feet
US3/4PEX-100F-B BLUE, Comes per box
US3/4PEX-100F-R RED, Comes per box
US3/4PEX-100F-W WHITE, Comes per box
PEX Union Elbow
PPSV040808W
1/4” JG X 1/4” JG STRAIGHT VALVE,
PPSV041212W
3/8” JG X 3/8” JG STRAIGHT VALVE,
PPSV010822W
1/4” MIP X 1/4” JG STRAIGHT VALVE,
PPSV011223W
3/8” MIP X 3/8” JG STRAIGHT VALVE,
PISV0416S
/2” JG X 1/2” JG STRAIGHT VALVE,
Angle Stop Adaptor Valve 3/8”
PE10328
PEX Coupler
PEX Union Elbow 3/4”, CTS,
ASVPP1
JG 3/8 MCTx3/8FCTx1/4JG,
ASVPP2
JG 3/8MCTx3/8FCTx3/8JG,
Check Valves - Inline
PEI0420
PEI0428
PEI0436
PEX Coupler, 1/2” CTS,
PEX Coupler, 3/4” CTS,
PEX Coupler, 1” CTS,
PEX Reducer Coupling
1/4SCV
3/8SCV
1/4” JG,
3/8” JG,
PEI062820
PEI063628
PEX Reducer, 3/4” Stem - 1/2” Pipe,
PEX Reducer, 1” Stem - 3/4” Pipe,
Accessories
101
Tubing & Fittings
(John Guest Quick Connect)
Marketing Materials
NOVO 2015 LITERATURE ORDER FORM
Catalog & Consumer Trifolds
PEI202820
3/4 x 1/2 Reducing Coupler,
PEX Plug-in Elbow
PEI222020
PEX Plug-In Elbow, 1/2” Stem - 1/2” Pipe,
PEI222828
PEX Plug-In Elbow, 3/4” Stem - 3/4” Pipe,
PEX Reducing Tee
PEI3028A
PEI3028B
PEI3028C
PEI3028D
PEX Stackable Tee
PEX Reducing Tee 3/4” x 3/4” x 1/2” CTS,
PEX Reducing Tee 3/4” x 1/2” x 1/2” CTS,
PEX Reducing Tee 1/2” x 1/2” x 3/4” CTS,
PEX Reducing Tee 3/4” x 1/2” x 3/4” CTS,
Description
80151000
Quantity
Item #
Description
2015 Catalog
80151021
Drinking Water Solutions
(50/pack)
8015020
Soft Water Solutions
(50/pack)
80151022
Point-of-Use Filter Solutions
(50/pack)
80151023
Problem Water Solutions
(50/pack)
80151027
Eco Smart Softeners
(50/pack)
Item #
Description
80151033
Carbon Pipe Hangers
(50/pack)
80155017
Sizing Guide
Item #
Description
80155018
Novo Showroom Poster
(22x28)
Quantity
Pipe Hangers & Sizing Guide
PEI532020
PEX Stackable Tee 1/2” CTS x 1/2” Stem x 1/2” CTS
PEI532820
PEX Stackable Tee 3/4” CTS x 3/4” Stem x 1/2” CTS
PEI532828
PEX Stackable Tee 3/4” CTS x 3/4” Stem x 3/4” CTS
PEX Miscellaneous
PEIBTC2034
PEIBTC20C75
PEISTC2034
PEISTC20C75
Item #
Quantity
Item #
Description
80151030
"Protect Your Biggest
Investment" Pipe Hangers
(50/pack)
Item #
Description
80155025
Trifold Counter Stand
8016000
Showroom Display
($195.00)
Quantity
Posters/Banners
Quantity
80155016
Novo Vinyl Banner
80051105
Water Sample Kit (Mailing
Tube, Bottle & Instruction)
Item #
Description
80155021
ProAdvantage Program
Overview Brochure
(2x4)
PEX Female Swivel Elbow, 1/2” CTS x 1/2” NPS
Quantity
PEX Female Ballcock Elbow, 1/2” CTS x 7/8”-15/16 UNS
PEX Female Swivel Connector, 1/2” CTS x 1/2” NPS
PEX Female Ballcock Connector, 1/2” CTS x 7/8”-15/16 UNS
Novo ProAdvantage
Quantity
Item #
Description
Quantity
Protect Your Biggest
80155019 Investment Homeshow Vinyl
Banner (2'x4')
"Protect Your Biggest
48151026 Investment" 485HE Softener
(50/pack)
80155020
Protect Your Biggest
Investment Poster (22x28)
80151029
"Your Hardness Is" Sticker
with Novo Help Line
80155023
Vehicle Decal (12x14)
80155022
Novo ProAdvantage Shirt
Decal
80155024
Window Static Cling Decal
(6x7)
Company Name:
Contact Name:
Mailing Address:
City,
Province/S
tate:
Telephone #:
Fax #:
Postal Code/Zip:
Email Address:
1-877-655-6686 OR [email protected]
102
Accessories
Accessories
103
Water Conditioning Glossary
Absorption - The process in which one substance is
taken into the body of another substance, termed the
absorbent. An example is the absorption of water into
soil.
Acid - A substance which releases hydrogen ions when
dissolved in water. Most acids will dissolve the common
metals and will react with a base to form a neutral salt
and water.
Activated Carbon - A granular material usually produced
by the roasting of cellulose base substances, such as
wood or coconut shells, in the absence of air. It has a very
porous structure and is used in water conditioning as an
adsorbent of organic matter and certain dissolved gases.
Sometimes called “activated charcoal.”
Adsorption - The process in which matter adheres to the
surface of the adsorbent.
Aeration - The process in which air is brought into intimate
contact with water, often by spraying water through air or
by bubbling air through water. Aeration may be used to
add oxygen to the water for oxidation of matter such as
iron or to cause the release of dissolved gases such as
carbon dioxide or hydrogen sulfide from the water.
Alkalinity - The quantitative capacity of a water or water
solution to neutralize an acid. It is usually measured by
titration with a standard acid solution of sulfuric acid and
expressed in terms of its calcium carbonate equivalent.
Anion - A negatively charged ion in solution such as
bicarbonate, chloride or sulfate.
Anion Exchange - An ion exchange process in which
anions in solution are exchanged for other anions from
an ion exchanger. In demineralization, for example,
bicarbonate, chloride and sulfate anions are removed
from solution in exchange for a chemically equivalent
number of hydroxide anions from the anion exchange
resin.
Aquifer - A layer or zone below the surface of the earth
which is capable of yielding a significant volume of water.
Atom - The smallest particle of an element that can exist
either alone or in combination with smaller particles of
the same element or of a different element.
Attrition - The process in which solids are worn down or
ground down by friction, often between particles of the
same material. Filter media and ion exchange materials
are subject to attrition during backwashing, regeneration
and service.
Backwash - The process in which beds of filter or ion
exchange media are subjected to flow opposite to service
flow direction to loosen the bed and to flush suspended
matter collected during the service run to waste.
Bacteria - Unicellular micro-organisms which typically
reproduce by cell division. Although usually classed as
plants, bacteria contain no chlorophyll.
Bacteriostatic - A feature of a carbon filter that is
supposed to inhibit the growth of bacteria within the filter
- usually by the addition of silver.
104
Base - A substance which releases hydroxyl ions when
dissolved in water. Bases react with acids to form a
neutral salt and water.
Bed - The ion exchange or filter media in a column or
other tank or operational vessel.
Bed Depth - The height of the ion exchange or filter media
in the vessel after preparation for service.
Boiling Point - The temperature at which a substance will
change from a liquid state to a gaseous or vapor state.
Brackish Water - Water containing between 1000 and
1500 mg/l of dissolved solids is generally considered to
be brackish.
Brine (R.O.) - Same as reject water. One of two streams
of fluids generated by a reverse osmosis unit. It contains
the impurities removed from the feed water.
Brine (Softening) - A strong solution of salt(s), such as
sodium chloride, and water used in the regeneration of
ion exchange water softeners but also applied to the
mixed sodium, calcium and magnesium chloride waste
solution from regeneration.
Calcium (Ca) - One of the principal elements making
up the earth’s crust, the compounds of which, when
dissolved, make the water hard. The presence of calcium
in water is a factor contributing to the formation of scale
and insoluble soap curds which are a means of clearly
identifying hard water.
Calcium Hypochlorite (CaCl2O2) - A chemical compound
used as a bleach and a source of chlorine water treatment;
specifically useful because it is stable as a dry powder
and can be formed into tablets.
Capacity - An expression of the quantity of an undesirable
material which can be removed by a water conditioner
between servicing of the media (i.e. cleaning, regeneration
or replacement) as determined under standard test
conditions. For ion exchange water softeners, the capacity
is expressed in grains of hardness removal between
successive regenerations and is related to the pounds of
salt used in regeneration. For filters, the capacity may be
expressed in the length of time or total gallons delivered
between servicing.
Caustic Soda - The common name for sodium hydroxide.
Cation - An ion with a positive electrical charge, such as
calcium, magnesium and sodium.
Cation Exchange - Ion exchange process in which cations
in solution are exchanged for other cations from an ion
exchanger.
Cellulose Acetate (CA) and Cellulose Triacetate (CTA) - A
family of synthetic materials based on cellulose used
to make reverse osmosis membranes. While CTA is
superior to CA, under adverse water conditions both are
effective in removing a wide spectrum of impurities from
water. The disadvantage of cellulose-type membranes
is that they are subject to bacterial attack, particularly in
unchlorinated water supplies. CTA has superior bacterial
resistance.
Water Conditioning Glossary
Channeling - The flow of water or other solution in a
limited number of passages in a filter or ion exchange
bed instead of distributed flow through all passages in
the bed.
Chloramines - Chemical complexes formed from the
reaction between ammonia and chlorine. They are presently
being used to disinfect municipal water supplies because,
unlike chlorine, they do not combine with organics in the
water to form potentially dangerous carcinogens such as
trihalomethanes (THMs). Chloramines can exist in three
forms, the proportions of which depend on the physical
and chemical properties of the water. Water containing
chloramines may not be used for fish or kidney dialysis
equipment.
Chlorides (Cl) - an ion which forms acids when combined
with hydrogen and salts when combined with metal ions.
Chlorides can be corrosive and impart a salty taste to
water.
Chlorine (Cl2) - A gas widely used in the disinfection of
water and an oxidizing agent for organic matter, iron, etc.
Coagulant - A material, such as alum, which will
form a gelatinous precipitate in water and cause the
agglomeration of finely divided particles into larger
particles which can then be removed by settling and/or
filtration.
Colloid - Very finely divided solid particles which will not
settle out of a solution; intermediate between a true
dissolved particle and a suspended solid which will settle
out of solution. The removal of colloidal particles usually
requires coagulation to form larger particles which may
be removed by sedimentation and/or filtration.
Compensated Hardness - A calculated value based on
the total hardness - the magnesium to calcium ratio and
the sodium concentration of a water. It is used to correct
for the reductions in hardness removal capacity caused
by these factors in cation exchange water softeners. No
single method of calculation has been widely accepted.
Conductivity - The quality or power to carry electrical
current. In water, the conductivity is related to the
concentration of ions capable of carrying electrical current.
Contact Time - The length of time water is in direct contact
with activated carbon (R.O.) or chlorine (chlorination
system.) This is a major factor in determining how
effectively impurities will be removed.
Corrosion - The destructive disintegration of a metal by
electrochemical means.
Cycle Time - The amount of time in seconds elapsed
between pump start and pump shut-down.
Dechlorination - The removal of excess chlorine residual,
often after super-chlorination.
Deionization (DI) - The removal of all ionized minerals
and salts (both organic and inorganic) from a solution by
a two-phase ion exchange procedure. First, positively
charged ions are exchanged for a chemically equivalent
amount of hydrogen ions. Second, negatively charged
ions are removed by an ion exchange resin for a
chemically equivalent amount of hydrogen ions. The
hydrogen and hydroxide ions introduced in this process
unite to form water molecules. The term is often used
interchangeably with demineralization.
Disinfection - A process in which pathogenic, disease
producing bacteria are killed. May involve disinfecting
agents such as chlorine or physical processes such as
heating.
Dissolved Solids - The weight of matter in true solution
in a stated volume of water. Includes both inorganic and
organic matter and is usually determined by weighing the
residue after evaporation of the water at 105°F or 180°C.
Distillation - The process in which a liquid, such as water,
is converted into its vapor state by heating and the vapor
cooled and condensed to the liquid state and collected.
Used to remove solids and other impurities from water.
Multiple distillations are required for extreme purity.
DNA - Deoxyribonucleic acid constituting the genetic
material of the chromosome in a cell, responsible for
reproductive characteristics.
Drawdown - The amount of water delivered by the
storage tank between pump shut-down and pump start.
E Coli (Escherichia Coli) - One of the members of the
coliform group of bacteria indicating fecal contamination.
Effluent - The stream emerging from a unit, system
or process such as the softened water from an ion
exchange softener.
Exhaustion - The state of an ion exchange material in
which it is no longer capable of effective function due to
the depletion of the initial supply of exchangeable ions.
The exhaustion point may be defined in terms of a limiting
concentration of matter in the effluent or, in the case of
demineralization, in terms of electrical conductivity.
Fecal - Matter containing or derived from animal or
human waste.
Feed Pressure - The pressure at which water is supplied
to the R.O. module.
Feed Water - A term which refers to the water supply
that is put into a water treatment system for processing
(removal of impurities.)
Flocculation - The agglomeration of finely divided
suspended solids into larger, usually gelatinous, particles.
The development of a ‘floc’ after treatment with a
coagulant by gentle stirring or mixing.
Flow Control - A device designed to limit the flow of
water or regenerant to a predetermined value over a
broad range of inlet water pressures.
Flow Rate - The quantity of water or regenerant which
passes a given point in a specified unit of time, often
expressed in gallons per minute.
Flux - The flow rate of water through reverse osmosis
membranes, per square foot of surface.
Fouling - The process in which undesirable foreign matter
accumulates in a bed of filter media or ion exchanger,
105
Water Conditioning Glossary
clogging pores and coating surfaces and thus inhibiting
or retarding the proper operation of the bed.
Freeboard - The vertical distance between a bed of
filter media or ion exchange material and the overflow
or collector for backwash water. The height above
the bed of granular media available for bed expansion
during backwashing. May be expressed either as a linear
distance or a percentage of bed depth.
Grain (gr) - A unit of weight equal to 1/7000 of a pound
or 0.0648 gram.
Grain per Gallon (gpg) - A common basis for reporting
water analysis in the United States and Canada. One
grain per U.S. gallon equals 17.12 milligrams per liter
(mg/l) or parts per million (ppm). One grain per British
(Imperial) gallon equals 14.3 mg/l or ppm.
Greensand - A natural mineral, primarily composed of
complex silicates, which can be coated with manganese
oxide to form a catalytic absorptive surface. This surface
is used to attract ferrous iron and manganese as well as
to absorb dissolved oxygen which is used to oxidize iron,
manganese or hydrogen sulfide.
Hardness - A characteristic of natural water due to the
presence of dissolved calcium and magnesium. Water
hardness is responsible for most scale formation in pipes
and water heaters and forms insoluble “curd” when it
reacts with soaps. Hardness is usually expressed in grains
per gallon (gpg), parts per million (ppm) or milligrams per
liter (mg/l), all as calcium carbonate equivalent.
Hard Water - Water with a total hardness of 1 gpg or
more as calcium carbonate equivalent.
Hydrologic Cycle - The natural water cycle, including
precipitation of water from the atmosphere as rain
or snow, flow of water over or through the earth
and evaporation or transpiration to water vapor in the
atmosphere.
Hydrogen Sulfide (H2S) - A gas characterized by an
offensive odor, commonly referred to as “rotten egg”
odor. Flammable and poisonous in high concentrations,
corrosive to most metals and can even tarnish silver.
Detectable by most people in concentrations as low as
0.5 ppm.
Hydrocharger - Trade name of a particular type of air
induction or injector valve.
Hydrolysis - The chemical degradation of an R.O.
membrane in water due to certain conditions such as high
pH. Cellulose based membranes are quite susceptible to
hydrolysis while the TFC type are virtually immune.
Influent - The stream entering a unit, stream or process,
such as the hard water entering an ion exchange water
softener.
Ion - An atom, or group of atoms, which function as a unit
and have a positive or negative electrical charge due to
the gain or loss of one or more electrons.
Ion Exchange - A reversible process in which ions
are released from an insoluble permanent material in
106
exchange for other ions in a surrounding solution; the
direction of the exchange depends upon the affinities
of the ion exchanger for the ions present and the
concentrations of the ions in the solution.
Iron (Fe) - An element often found dissolved in ground
water (in the form of ferrous iron) in concentrations
usually ranging from 0-10 ppm (mg/l). It is objectionable
in water supplies because of the staining caused after
oxidation and precipitation (as ferric hydroxide); because
of the tastes; and because of unsightly colors produced
when iron reacts with tannins in beverages such as
coffee and tea.
Iron Bacteria - Organisms which are capable of utilizing
ferrous iron, either from the water or from steel pipe
in their metabolism and precipitating ferric hydroxide in
their sheaths and gelatinous deposits. These organisms
tend to collect in pipelines and tanks during periods of
low flow and to break loose in slugs of turbid water to
create staining, taste and odor problems.
Magnesium (Mg) - One of the elements making up
the earth’s crust, the compounds of which, when
dissolved in water, make the water hard. The presence
of magnesium in water is a factor contributing to the
formation of scale and insoluble soap curds.
Manganese (Mn) - An element sometimes found
dissolved in ground water, usually with dissolved iron but
in lower concentrations. Causes black stains and other
problems similar to iron.
Manganese Greensand - Greensand which has been
processed to incorporate in its pores and on its surface
the higher oxides of manganese. The product has a mild
oxidizing power and is often used in the oxidation and
precipitation of iron, manganese and/or hydrogen sulfide
and their removal from water.
Mechanical Filtration - The process of removing
suspended particles from water by a straining action. The
finest mechanical filters can remove bacteria as small as
0.2 microns.
Media - The selected materials in a filter that form the
barrier to the passage of certain suspended solids or
dissolved minerals. (Singular of media is medium).
Milligrams per Liter (mg/l) - A unit concentration of matter
used in reporting the results of water and wastewater
analysis. In dilute water solutions, it is practically equal to
parts per million but varies from the ppm in concentrated
solutions such as brine. As most analysis are performed
on measured volumes of water, the mg/l is a more
accurate expression of the concentration and is the
preferred unit of measure.
Micron - A linear measure equal to one millionth of a
meter or .00003937 inch. The symbol for the micron is
the Greek letter “μ”.
Micron Rating - The term applied to a filter or filter medium
to indicate the particle size above which all suspended
solids will be removed throughout the rated capacity.
As used in industry standards, this is an “absolute”
not “nominal” rating. (Refer to S-200, Recommended
Water Conditioning Glossary
Industry Standards for Household & Commercial Water
Filters.)
Common examples include: oxygen, chlorine, potassium
permanganate, hydrogen peroxide, iodine and ozone.
Mineral - A term applied to inorganic substances such
as rocks and similar matter found in the earth strata
as opposed to organic substances such as plant and
animal matter. Minerals normally have definite chemical
composition and crystal structure. The term is also
applied to matter derived from minerals such as the
inorganic ions found in water. The term has been
incorrectly applied to ion exchangers, even though most
of the modern materials are organic ion exchange resins.
Ozone (O3) - An unstable form of oxygen occurring naturally
in the upper atmosphere or artificially produced because
of its strong oxidizing or disinfection characteristics.
Mineral Salts - The form in which minerals from dissolved
rock exist in water. Same as Total Dissolved Solids. This
is the so-called inorganic form of minerals. In excess,
they cause water to have a disagreeable taste. Some are
harmful to human health.
Molecular Weight - The sum of the atomic weights of the
individual atoms (from a periodic chart) that make up a
molecule of a particular substance (e.g. H2O) H=1 atomic
weight, 0=16 atomic weight, therefore, molecular weight
= 2 + 16 = 18.) Cellulose based membranes can remove
substances as light as MW of 300, while TFC type
membranes remove substances as light as MW of 200.
Nanometer - A measure of a wavelength in the
electromagnetic spectrum. One nanometer equals 109
meter.
Neutralization - In general, the addition of either an
acid or a base to a solution as required to produce a
neutral solution. The use of alkaline or basic materials to
neutralize the acidity of some waters is common practice
in water conditioning.
Organic Iron - A ferrous iron molecule which is enveloped
in an organically complex molecule that resists oxidation.
May be present in water that contains a great deal of
colored colloidal turbidity.
Organics - Any of the compounds whose chemical
structure is based on carbon (e.g. carbon dioxide, wood,
sugar, protein, plastics, methane, THM, TCE, etc.)
Osmosis - A process of diffusion of a solvent, such
as water through a semipermeable membrane, which
will transmit the solvent but impede most dissolved
substances. The normal flow of solvent is from the dilute
solution to the concentrated solution. (See Reverse
Osmosis).
Osmotic Pressure - The pressure created by the tendency
of water to flow in osmosis. Every 100 ppm of TDS
generates about 1 pound per square inch (psi) of osmotic
pressure. This osmotic pressure must first be overcome
by the water pressure for the reverse osmosis membrane
to be effective.
Oxidation - A chemical process in which electrons are
removed from an atom, ion or compound. The addition
of oxygen is a specific form of oxidation. Combustion is
an extremely rapid form of oxidation while the rusting of
iron is a slow form.
Oxidizing Agents - Any substance that oxidizes
another substance and is itself reduced in the process.
Particle Size - As used in industry standards, the size of a
particle suspended in water as determined by its smallest
dimension, usually expressed in microns.
Parts per Million (ppm) - A common basis for reporting
the results of water and waste water analysis, indicating
the number of parts by weight of water or other solvent.
In dilute water solutions, on part per million is practically
equal to one milligram per liter, which is the preferred
unit. 17.12 ppm equals one grain per U.S. gallon.
Pathogen - An organism which may cause disease.
PCB - Polychlorinated Biphenyls - A highly toxic organic
contaminant found in water supplies which is suspected
of causing cancer in humans.
pH - or the potential of hydrogen ion activity or
concentration. pH is a measure of the intensity of the
acidity or alkalinity of water on a scale from 0 to 14, with
7 being neutral. When acidity is increased, the hydrogen
ion concentration increases, resulting in a lower pH value.
Similarly, when alkalinity is increased, the hydrogen ion
concentration decreases, resulting in higher pH. The pH
value is an exponential function so that pH is 10 times
as alkaline as pH 9 and 100 times as alkaline as pH 8.
Similarly, a pH 4 is 100 times as acid as pH 6 and 1000
times as acid as pH 7.
Potassium Chloride (KCl) - a compound consisting of
potassium and chloride, becoming increasingly popular
as a substitute for sodium chloride in regenerating water
softeners.
Potassium Permanganate (KMnO4) - A powerful oxidizing
agent consisting of dark purple crystals with blue metallic
sheen. Explosive in contact with sulfuric acid or hydrogen
peroxide. Increases flammability of combustible materials.
Used to renew the black manganese oxide coating on
greensand media.
Precipitate - To cause a dissolved substance to form a
solid particle which can be removed by settling or filtering
such as in the removal of dissolved iron by oxidation,
precipitation and filtration. The term is also used to refer
to the solid formed and the condensation of water in the
atmosphere to form rain or snow.
Pre-treatment - Whatever alterations of the raw feed
water are required to prevent damage to the reverse
osmosis membrane.
Product Water - The pure water that has been separated
from the feed water stream by the reverse osmosis
membrane.
Pumping Rate - The amount of actual water that can
be drawn from a pressure system expressed in gallons
per minute (gpm) obtained by dividing the drawdown
(gallons) by the cycle time (seconds) and multiplying the
result by 60 (seconds.)
107
Water Conditioning Glossary
Notes
Quartz - A high grade of glass made using quartz sand.
____________________________________________________________________________________________
Raw Water - Untreated water or any water before it
reaches a specific water treatment device or process.
Recovery - The amount of product water as compared
with the total amount of feed water. This will give a
measure of the efficiency of operation. For example,
starting with 10 gallons of feed water, if 6 gallons is
product water and 4 gallons reject water, the recovery
is 60%.
Regenerant - A solution of a chemical used to restore the
capacity of an ion exchange or oxidation system.
Regeneration - In general, includes the backwash, brine
and fresh water rinse steps necessary to prepare a water
softener exchange bed for service after exhaustion.
Specifically, the term may be applied to the “brine” step
in which the sodium chloride solution is passed through
the exchanger bed. The term may also be used for similar
operations relating to demineralizers and certain filters.
Rejection - The percentage of TDS removed from the
feed water. Typically greater than 90% rejection is
achieved with reverse osmosis.
Reject Water (same as Brine) - That portion of the feed
water that does not pass through the R.O. membrane
and which carries the remaining impurities to the drain.
Residual Chlorine - Chlorine remaining in a treated
water after a specified period of contact time to provide
protection throughout a distribution system. The
difference between the total chlorine added and that
consumed by oxidizable matter.
Resin - Synthetic organic ion exchange material such as
the high capacity cation exchange resin widely used in
water softeners.
Reverse Osmosis (R.O.) - A process that reverses, by the
application of pressure, the flow of water in the natural
process of osmosis so that the water passes from the
more concentrated to the more dilute solution through a
semi-permeable membrane.
Sediment - The sum of particles of dirt, clay, silt and
vegetation which float or are suspended in water and can
be removed by mechanical filtration. See Turbidity.
soaps are soluble and useful but can be converted to
insoluble calcium and magnesium soaps (curd) by the
presence of these hardness ions in water.
Soda Ash - The common name for sodium carbonate, a
chemical compound used as an alkaline builder in some
soap and detergent formulations to neutralize acid water
and in the lime soda ash water conditioning process.
Total Hardness - The sum of all hardness constituents
in a water, expressed as their equivalent concentration
of calcium carbonate. Primarily due to calcium and
magnesium in solution but may include small amounts
of metals, such as iron, which can act like calcium and
magnesium in certain reactions (see Hardness.)
Toxic - Having an adverse physiological effect on man.
Toxic Metals - Elemental metals that find their way
into water supplies from natural and industrial sources
and which are detrimental to human health (e.g. lead,
cadmium, mercury, arsenic.)
Toxic Organics - Carbon-based chemicals which are
frequently found in our water supplies and are harmful
to human health. They are usually from agricultural and
industrial effluents and hazardous waste dumps (e.g.
TCE, PCB, DCBP, pesticides, etc.)
Turbidity - Suspended biological, inorganic and organic
particles in water which may be in sufficient amount to
make the water seem cloudy (see Sediment.)
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
Virus - The smallest form of life known to be capable of
producing disease of infection, usually considered to be
of large molecular size. They multiply by assembly of
component fragments in living cells, rather than by cell
division as do most bacteria.
____________________________________________________________________________________________
Volatile Organic Chemical (VOC) - Chemicals or
compounds with boiling points below 212°F, facilitating
their evaporation before water.
____________________________________________________________________________________________
Water Softening - The removal of calcium and magnesium,
the ions which are the principal cause of hardness, from
water.
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
Semi-permeable - A term which applies to special
materials, both natural and synthetic, which allow
certain substances such as water to pass through (to
permeate) while blocking or rejecting the passage of
other substances such as dissolved solids and organics.
____________________________________________________________________________________________
Service (Peak) Flow Rate - The greatest amount of water
(expressed in gallons per minute) that a particular filter
can effectively process based on short pump runs of less
than 10 to 15 minutes maximum.
____________________________________________________________________________________________
Sequester - A chemical reaction in which certain ions
are bound into a stable, water soluble compound, thus
preventing undesirable action by the ions.
Soap - One of a class of chemical compounds which
possesses cleaning properties, formed by the reaction of
a fatty acid with a base of alkali. Sodium and potassium
108
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
109
Notes
Notes
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
110
111
U.S.A.
760 Mayflower Park Dr
Suite 110, Carmel, IN 46032
U.S.A.
8437 10th Ave North
Golden Valley, MN 55427
Canada West
655 Park St.
Regina, SK S4N 5N1
Canada East
490 Pinebush Rd Unit 1
Cambridge ON N1T 0A5
CALL US TOLL-FREE
1-877-655-6686
TOLL-FREE FAX: 1-877-658-6686
[email protected]
www.novowater.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement