SC-848W-300 | User manual | Robic SC-848W OPERATING INSTRUCTIONS

Add to my manuals
12 Pages

advertisement

SC-848W-300 | User manual | Robic SC-848W OPERATING INSTRUCTIONS | Manualzz
Robic SC-848W OPERATING INSTRUCTIONS
THANK YOU for buying the Robic SC-848W–300 Memory Speed-Chrono
Countdown Timer. Your purchase brings you a reliable, World-Class Timer which
measures performance for a wide array of sports and many other activities.
In order to ensure that you receive the maximum enjoyment from your SC848W: BEFORE USING, PLEASE TAKE A MOMENT TO REVIEW THIS
OPERATION GUIDE TO FULLY UNDERSTAND HOW YOUR TIMER WORKS.
Then you can enjoy its many features which include:
• EL backlight illuminates entire display
• 300 dual split memory recall
• 1/100 second precision to 100 hours
• User selectable running lap or split time
• Automatic lap counter to 999
• Stroke Rate Calculator displays strokes per minute
• Speed timer in MPH/KPH
• 300 memory recall of lap speed, time and number
• Advanced countdown timers show time remaining
• Water Resistant to 30 meters
• Break-Away Safety Lanyard helps prevent accidents, promotes safe use
• Dual countdown timers
• Ten year warranty; Lithium battery CR-2032
PART 1
PUSHBUTTON AND INDICATOR LOCATION AND OPERATION
The following illustration details the location of pushbuttons for setting and operating the
SC-848W.
(B) Lap/Split-Reset ↓
(D) Backlight→
(F) Recall-Set→
↓ (A) Start-Stop
← (C) Backlight
← (E) Mode-Select
Indicators are located between the Middle and Lower rows of the display. Indicators help
you identify what functions are currently in use on the SC-848W. They will appear (or
flash in some cases) when an associated function or mode is activated.
RECALL Memory
SLOW Slowest Lap
FAST Fastest Lap
AVG Average Lap
STW Stopwatch Running
LAP Lap Time
STOP Stopwatch Stopped
SPLIT Split Time
3
S
T
Loop
Count up /
Countdown
TTT
T T
Countdown
Repeat
۩
Alarm
♪
Chime
FULL
Memory
Full
SPEED TIME
Speed
Time
DIST
RATE
Distance
Rate
MI
KM
Miles Kilometers
MPH
KPH
Miles
per hour
Kilometers
per hour
MODE SEQUENCE
The SC-848W has six primary modes of operation: Normal Time, Alarm, Countdown
Timers, Chronograph (Stopwatch), Speed Timer and Stroke Rate Calculator.
They are displayed in this sequence by pressing (E). The name of the Mode will be
displayed for 1-2 seconds and then the actual function will appear.
Normal Time--Press “E”
TIME
WE 12 25
20 08
AM 10:28:38
Alarm Time—Press “E”
ALARM
ALARM
AM 12:09
AM 10:28:38
Countdown Timers—Press “E”
TIMER
TR
00:15 00 00
00:00:00 00
Chronograph (Stopwatch)—Press “E”
[000] 00:00’00”00
CHRONO
00:00’00”00
00:00’00”00
Speed Timer—Press “E”
[000] 00:00’00”00
SPEEd
DIST
0.250
MI
00:00’00”00
Stroke Rate Calculator—Press “E”
[ 2]
STROKE
STROKE
00 00.00
00:00’00”00
EL BACKLIGHT OPERATION
Pressing “C” or “D” at any time during any operation will activate the ElectroLuminescent (EL) Backlight function for viewing at night and in low light or no
light situations.
Once pressed, the EL backlight will illuminate the display for three (3) seconds
with a light blue back lighting.
IMPORTANT:
Please use the EL backlight as required, but note it will reduce the product’s battery life.
AUDIBLE BEEP CONFIRMATION-HOURLY CHIME
While in the Normal Time mode, Press “A” to arm and disarm the Hourly Chime. The
Chime symbol (♪) will appear when armed or disappear when disarmed.
When the Hourly Chime is armed, the SC-848W will sound a Beep tone any time a
pushbutton is pressed. You may silence the tone by disarming the Hourly Chime.
The Hourly Chime can be armed to sound two beeps at the top of each hour. The Chime
indicator (♪) will appear when the chime is armed.
PART 2 NORMAL TIME OPERATION
The starting point for operating your timer is NORMAL TIME. If NORMAL TIME is
not displayed, press “E” until it appears. TIME indicator appears.
TIME
WE 12 25
20 08
AM 10:28:38
To begin the setting process, press and hold “E” until Seconds begin to flash and
SET appears in the upper row of the display.
NORMAL TIME SECONDS:
Press or hold “A” to reset to all zeros.
NORMAL TIME HOURS: Press “B” and normal time hours appear flashing. Press or
hold “A” to advance.
NORMAL TIME MINUTES: Press “B” and normal time minutes appear flashing. Press
or hold “A” to advance.
YEAR SETTING: Press “B” and year appears flashing. Press or hold “A” to advance.
MONTH SETTING: Press “B” and the month (1-12) digits appear flashing. Press or
hold “A” to advance.
DATE SETTING: Press “B” and date (1-31) appears flashing. Press or hold “A” to
advance.
DAY SETTING: The day of the week will set automatically after the year, month and
date are entered…MO (Monday), TU (Tuesday), WE (Wednesday), TH (Thursday), FR
(Friday), SA (Saturday) and SU (Sunday).
US/EU SETTING: You may choose to display the time of day and calendar in either US
or European formats by pressing “B”. Press “A” to select US or EU.
After setting, press “F” to exit the setting mode. All digits (except seconds) will appear
frozen.
12/24 HOUR OPTION: The time may be set to operate in AM/PM (hours 1-12) or on a
24 hour basis (hours 0-24). To select the (12) or (24) hour option, press “B”
NOTES:
(1) You may complete the setting process at any point by pressing “E” or “F”.
(2) If you wish to set any particular function (time, calendar) press and hold “F” for three
(3) seconds. Then press “B” until that digit (s) appear(s) flashing. Press “A” to
advance that function, then press “F” to complete the setting process.
(3) “Smart” Calendar: After setting the calendar, the SC-848W will automatically adjust
after the last day of each month to the first day of the next month, taking into account
months with fewer than 31 days.
PART 3 ALARM TIME OPERATION
From Normal Time, press “E” once. The ALARM TIME mode will appear.
ALARM
ALARM
AM 12:09
AM 10:28:38
While in ALARM TIME mode, press and hold “F” for 2-3 seconds. SET indicator
appears. Alarm hours will begin flashing. Advance Alarm Hours by pressing or holding
“A”. After setting Alarm Hours, Press “B”. Alarm Minutes will appear flashing.
Advance by pressing or holding “A”. The alarm will automatically be armed (set to go
off) after the Alarm Time is adjusted.
Pressing “F” at any time, will automatically exit the setting procedure. SET indicator
disappears. Press “A” while in Alarm Time to arm or disarm the Alarm.
Time of Day and Alarm Time will both be presented in the AM/PM or 24 Hour format
chosen. “A” or “P” will appear in the AM/PM format.
The Alarm can be armed (set to go off) to sound once per day. The Alarm symbol “۩”
will appear when the alarm is armed.
When armed, the alarm will sound when the Alarm Time coincides with Time of Day.
You may silence the alarm by pressing any pushbutton.
PART 4 COUNTDOWN TIMER(S) OPERATION
From NORMAL TIME, press “E” twice. The Countdown TIMER mode will appear.
TIMER
TR
00:15 00 00
00:00:00 00
The SC-848W provides three separate Countdown Timer options:
Countdown and Count up: Counts down from the preset time and then counts up.
Loop Timer: Automatically repeats the preset time up to 99 times.
Training Timers: Input up to nine separate preset times to countdown in sequence.
Upon entering the TIMER mode, you may select the option you seek by pressing and
holding “B” for three (3) seconds. Each option will appear with the respective indicators
(refer to Part 1).
Countdown and Count up: TR appears in the top row of the display.
To set: Press and hold “F” for 2-3 seconds. SET appears flashing and Countdown Hours
flash. Press “A” to advance hours. Repeat this process for Minutes and Seconds. Press
“F” again to exit setting.
Start the Countdown by pressing “A”. Time will count down in 1/100 second format.
You may stop and restart time counting down by pressing “A” when necessary. Upon
completion, the timer will sound a signal and begin counting time up as a stopwatch.
Stop the Stopwatch by pressing “A” twice and then holding “B” for three seconds to reset
to the Preset time and sequence into the next option.
Loop Timer: (000) and TR appear in the top row as does the loop indicator. Set the
Preset as instructed in above paragraph. Press “A” to begin the Countdown Timer. Upon
completion of the first loop sequence, press “A” twice to stop the time counting down.
After countdown time is complete, a signal will sound and the SC-848W will
immediately begin the countdown sequence again. Press and hold “B” for three seconds
to reset the timer and sequence to the next option.
The number of completed times is recorded in the Counter on the top row, up to 99.
Training Timers: (000) / 01 TR 1 appears in the top row and the Repeat (down
arrows) indicator. Press “F” to select from timers 1 though 9. You may preset up to 9
separate times (channels) which will countdown sequentially. Once selected, set the
preset time by pressing and holding “F” for 2-3 seconds. TR and the timer number (for
example, “3”) begin to flash. Advance to the timer number by pressing “A”.
Press “B” again and Hours begin to flash. Advance hours by pressing “A”. Repeat this
sequence for Minutes and Seconds. Once the time is entered, you may select another
timer number to set or exit the setting sequence by pressing “F”.
After you have entered the preset times, start your Training Timers by pressing “A”. The
timers will sequence through each channel, with an audible beep signaling the end of the
previous segment. You may skip channels if no time value is entered. For instance, if
you have times input in channels 3, 5, 6 and 9, the SC-848W will go from one to the next
and ignore 1,2,4,7 and 8.
Times may be preset from one second to 100 hours.
PART 5- CHRONOGRAPH (STOPWATCH) OPERATION
From NORMAL TIME, press “E” three times to enter the CHRONO mode. STW, LAP,
STOP and SPLIT indicators appear.
[000] 00:00’00”00
CHRONO
00:00’00”00
00:00’00”00
The “stopped” chronograph (stopwatch) display will appear as shown above. If not,
press “A” to stop and “B” for 2-3 seconds to reset the display to all zeros.
The working range of the chronograph is one hundred hours, with a resolution of 1/100
second. The chronograph measures lap and split time, simultaneously. You may set
Row 3 to present either running Lap or running Split (accumulated) time.
(NOTE: You cannot operate the chronograph when the speed timer is not reset to
all zeros. To stop the speed timer, enter the speed mode. Stop timing by pressing “A”
once. Press “B” for two seconds until the timer is reset to all zeros. Once the speed timer
is stopped, you may enter and use the chronograph.)
Select Lap or Split in Row 3:
While the chronograph is reset to all zeros, press and hold “B”. LAP or SPL indicator
will appear flashing. Select between LAP and SPLIT by pressing “B”.
Selecting SPLIT will cause the timer to display the accumulated running time from the
start of the event in Row 3.
Select Recall Up or Down
While the chronograph is reset to all zeros, select Memory recall as Ascending
(1,2,3,…300) or Descending (300,299,298…3,2,1) order by pressing “F”. When
Descending is selected, the down arrow (▼) will appear. If Ascending is selected, the
down arrow will disappear.
Timing Single Lap Events
Start timing by pressing “A”. Stop timing by pressing “A” again. Reset to zeros by
pressing “B” for two seconds.
Timing Multiple Lap/Split Events
If chrono is running, reset time by pressing “A” to stop the chronograph and “B” for two
seconds to reset to all zeros.
TO START: Press “A” and the timer will begin to run (RUN indicator appears.).
TO TAKE LAP/SPLIT READING: Press “B” to take as many lap/split readings as
necessary. The SC-848W will take up to 1000 readings. The reading number will appear
in the Lap Counter brackets on the left of the top row.
TO STOP TIMING: Press “A”, STOP indicator appears. Press “B” for two seconds to
reset to zeros or use the Advanced Functions described below.
ADVANCED FUNCTIONS
Your SC-848W has a 300 Dual LAP/SPLIT memory, as well as Fastest, Slowest and
Average Lap Time display. You may use these advanced functions, anytime, during or
after timing the event, as long as the display is not reset to all zeros.
MAX/SLOW/AVERAGE LAP TIME will be displayed when pressing “F”. The MAX,
SLOW and AVG indicators and lap number will appear, respectively.
Max, Slow and Average lap data can be displayed during or after event timing and prior
to resetting the display to all zeros.
300 DUAL MEMORY: Your timer has the capability to recall the previous 300
completed lap and split times through 1000 laps. (300, 299, 298, etc.) at any time,
whether running or stopped - RECALL indicator will appear.
To use memory recall, when the timer is running, press or hold “F” and the recall
indicator appears along with the individual lap and split times.
To use memory recall after the timer is stopped and the display has not been reset to all
zeros, proceed as follows:
Press or hold “F” to retrieve memory data. To reset the timer to all zeros, press “E”
(RECALL indicator disappears) and then press “B” for two seconds until all zeros
appear.
NOTE: When the chronograph is stopped, you cannot retrieve memory or other time
data if the display has been reset to all zeros. Always retrieve memory recall and/or
FAST/SLOW/AVG time data prior to resetting the chronograph.
TIME OUT: Your chronograph has a time-out feature. If the event being timed is
stopped for any reason, press “A” to stop timing, restart by pressing “A”. All previously
recorded data will be stored in memory (up to 300 laps).
Part 6 SPEED TIMER OPERATION
The Speed Timer will compute and display speed in MPH/KPH as a function of distance
and time. To enter the Speed Timer mode from normal time, press “E” four times. If the
Speed Timer is running, stop timing by pressing “A” once. Reset the display to all zeros
by pressing “B” for two seconds. The display will show:
[000] 00:00’00”00
SPEEd
DIST
0.250
MI
00:00’00”00
The Speed Timer will not operate unless the Chronograph is stopped and Reset to all
zeros. STOP indicator will appear.
How to Determine and Enter the Distance.
The first step is to enter the distance correctly. The speed timer will not work unless a
distance is entered.
Distance is entered as the decimal equivalent of a mile or kilometer from 000.001 to
999.999. For example, enter 2 ½ miles/kilometers as 002.500, 1/3 as 000.333, 1/8 as
000.125, etc.
You may convert feet to the decimal equivalent of a mile, i.e., 187 feet is entered as
000.035 (187 divided by 5280 = 000.035)
Convert meters to kilometers as follows: 230 meters is entered as 000.230 (230 divided
by 1000 = 000.230).
Enter Distance.
To enter the distance when the timer is stopped and reset to zeros, press and hold “F” for
three (3) seconds until SET appears in the bracket on the top row of this display and
UNIT appears flashing above the upper row of digits in the display.
MI or KM will also appear flashing between the middle and lower rows of the display.
Press “A” until the desired unit of measurement (mile or km) appears.
Press “B” and the first digit of the distance value located in the middle row (000.000)
appears flashing. Advance the digit (0-9) by pressing or holding “A” until the desired
value appears. Once set, move to the second digit by pressing “B”. Change the second
digit by pressing “A”.
Continue to set each digit on the distance scale until you have entered the correct
distance. Press “F” to exit the distance setting process. The distance set will appear in
the middle row without any digits flashing.
NOTES:
(1) Should you need to set any particular digit on the distance scale, press “F” until SET
“mile” or “km” appears flashing. Then press “B” until the correct digit appears flashing.
Change the digit(s) by pressing “A”. To exit the setting procedure, press “F”
(2) The maximum setting distance is 999.999 miles or kilometers.
(3) The speed timer will not work unless a distance has been entered.
Select Recall Up or Down
While the Speed Timer is reset to all zeros, select Memory recall as Ascending (1,
2,3,…300) or Descending (300,299,298…3,2,1) order by pressing “F”. When
Descending is selected the down arrow (▼) will appear. If Ascending is selected, the
down arrow will disappear.
One Lap Event (START/STOP/RESET)
START: Press “A” to start the timer. RUN and LAP indicators appear. Time appears
running in Row 3.
STOP: Press “A” again to stop the timer. The “Stop” indicator appears.
RESET (all zeros): To return the timer to the start position, press “B” for 2 seconds.
IMPORTANT NOTICE--- “ERROR” INDICATOR
When taking a speed reading and ERROR appears in the middle row, you have exceeded
the speed capacity of the timer (999.999 mph/kph).
This occurs when you take a lap reading too soon, either by accident or on purpose, i.e.
long distance and fast lap time. When this situation occurs, your timer is functioning
properly and is still recording data. Wait until the lap is completed, then press “B” and
the appropriate lap speed and time will appear on the display.
Multiple Lap Event Timing
When timing multiple lap events, the operating sequence is: START - LAP - STOP RESET.
START: Press “A” to start. STW and LAP indicators appear and the time appears
running in Row 3.
LAP: To take a lap reading, press “B” the instant the lap is completed. SPEED indicator
appears. The lap number and time appear in Row 1, the lap speed in Row 2. The current
lap running time will appear in Row 3. Continue to press “B” for each lap reading as
needed. Your SC-848W will take up to 1000 lap speed readings.
STOP/END OF EVENT: At the end of the event, press “A”, STOP indicator appears.
The speed and time of the last lap will appear in the display (lap number and time in the
top row and speed in the middle row) and the lower row will show the last recorded lap
time.
RESET: After you have completed timing and reviewing all information, press “B” for
two seconds to reset the Speed Timer to all zeros.
ADVANCED FUNCTIONS: Your SC-848W speed timer is equipped with the
advanced functions described below. You may use all the Advanced Functions during or
after your timing of the event. Please review them carefully.
ADVANCED FUNCTIONS CANNOT BE USED IF YOU HAVE RESET THE
DISPLAY TO ALL ZEROS.
Max - Slow - Average and Memory Recall
Your SC-848W has a 300 lap memory through 999 laps, as well as Fastest, Slowest and
Average Lap Speed and Time display. To use these functions, press “F” anytime while
in the Speed Timer Mode. The MAX indicator will appear above the top row.
Max - Slow - Average Lap Speed & Time
The MAX indicator means the Fastest Lap Time is shown in the top row and the
associated Maximum speed of all readings taken is displayed in the middle row. The
Fastest lap number is displayed in the LAP counter.
Press “F” again to display the SLOWEST Lap Speed, Time and Number. The SLOW
indicator will appear.
Press “F” again, to display the Average Lap Speed and Time of all readings. The AVG
indicator will appear. The Lap Counter will show the total amount of readings taken.
300 Memory Recall
After sequencing through the Fastest, Slowest and Average Lap information, press or
hold “F” to review up to the previous 300 readings in speed, time and lap number up
through 999 laps. The SC-848W will review in descending order (999, 998, 997, etc. . .).
The lap speed will appear in the middle row and the lap number and time will appear in
the top row.
During Memory Recall use, you may press “E” at any time, to return to the current or
previously taken readings.
To take another lap reading during use of the Advanced Functions, while the timer is
running, simply press “B” and the next reading will appear.
Pressing “B” for 2 seconds anytime while in the STOP position will reset the Speed
Timer to all zeros.
PART 7 STROKE RATE CALCULATOR
From NORMAL TIME, press “E” five times to enter the Stroke Rate Calculator Mode.
[ 2]
STROKE
00 00.00
00:00’00”00
A stroke rate is determined by measuring the time it takes to complete a certain activity
or set of actions and then calculating how many times that it will be completed in one
minute. For example, if a swimmer completes three (3) strokes in 10 seconds, than the
Stroke Rate Calculator will read 18 strokes per minute.
To operate the Stroke Rate Calculator, enter the number of strokes you wish to measure.
You may input from 2 to 30 strokes. Make certain the calculator is reset to all zeros by
pressing and holding “B” for 2 seconds.
To enter the number, press and hold “F” for 3 seconds. SET will appear flashing in the
brackets and the value in the middle row will appear flashing. Then, press and hold “A”
to advance. When you reach the stroke number you wish to use, press “F” to exit the
setting procedure.
Start the Calculator by pressing “A”. After the completion of the stroke (or activity),
press “A” again. The time for the activity is displayed in the bottom row while the stroke
rate per minute is displayed in the middle row of the display.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement