Sena 20S Motorcycle Communication System, SR10 Bluetooth Two-way Radio Adapter User's Guide

Below you will find brief information for Motorcycle Communication System 20S 20S. The 20S is a motorcycle Bluetooth communication system, allowing you to call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. It is compliant with the Bluetooth 4.0 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile (AVRCP).

PDF Download
Document
Sena 20S User's Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Bluetooth 4.0
  • Audio Multitasking™
  • Multi-way intercom up to 8 connections
  • Group Intercom
  • Bluetooth intercom up to 2.0 kilometers (1.2 miles)*
  • Universal Intercom™
  • Advanced Noise Control™
  • HD quality crystal clear and natural sound
  • Bluetooth Audio Recording™
  • Built-in FM radio tuner with a station scan and save function

Frequently asked questions

Turn on the 20S and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. You will hear a voice prompt saying “Phone pairing”. Search for Bluetooth devices on your mobile phone. Select the Sena 20S in the list of the devices detected on the mobile phone. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. The mobile phone confirms that pairing has completed and the 20S is ready to use. You will hear a voice prompt from the 20S saying “Your headset is paired”. If the pairing process is not completed within three minutes, the 20S will return to stand-by mode.

You can make a phone call by entering numbers on your mobile phone’s keypad and making a call. Then the call is automatically transferred to the headset. For older mobile phones which do not automatically transfer calls to the headset, press the Phone Button after entering phone numbers on the mobile phone keypad. Tap the Phone Button in stand-by mode to activate the voice dialer of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction.

You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo. To listen to music with the stereo audio cable, plug your stereo MP3 player directly to the 20S by using the enclosed 2.5mm to 3.5mm stereo audio cable. To adjust the volume, rotate the Jog Dial on the headset. You may adjust the volume on the MP3 player also. To listen to music by Bluetooth wireless stereo, the Bluetooth audio device must be paired with the 20S by following the “Bluetooth Stereo Device Pairing” procedures described in the section 5.3. The 20S supports the Audio/Video Remote Control Profile (AVRCP) allowing you to play, pause, track forward or back, adjust volume, and control the music from the 20S.
Preparing document for printing…
0%