Draper Tool Chest Instructions

Below you will find brief information for Tool Chests, Roller Cabinets. This document provides instructions for assembling and using the Tool Chests and Roller Cabinets. It includes information on attaching the push bar, removing and installing drawers, removing and reinstalling slides, and lubricating the sliders. The document also contains health and safety information and warnings.

PDF Download

Document

 e Expert Tool Chests
&amp; Roller Cabinets
INSTRUCTIONS
HEALTH &amp; SAFETY INFORMATION
e WEAR SAFETY GLASSES AND GLOVES when removing strapping and packaging materials.
Straps can snap when removed causing personal injury.
WEAR SAFETY GLASSES when replacing or repositioning ball bearing drawer slides.
DO NOT pull this product-push the product to prevent personal injury.
Swivel castor and push bar must be placed on same side of the product.
USE THE BRAKE when this product is not being moved. The brake will prevent accidental
rolling which may product damage or personal injury.
DO NOT open more than one drawer at a time as this may cause the product to tip causing
personal injury or product damage.
DO NOT alter this product by welding attachment or adding electrical equipment. Do not
mount this product on a moving object or vehicle as this may cause personal injury or
product damage.
DO NOT tow this product with moving equipment or vehicles as this may cause product to
tip, causing personal injury or product damage.
DO NOT step in drawers or on top of unit as this may cause the product to tip. This may
cause personal injury or product damage.
Take caution when closing the cover and remove hands before cover is closed completely.
Maximum drawer weight capacity should not exceed 45kg (1001b).
Maximum product weight (including contents) should not exceed 450kg (1000Ib).
To lock a chest, close drawers before closing lid, making sure all drawers are firmly closed
to ensure proper function of locking bars.
Always use the proper sized cabinet and chest combination. Improper matching of cabinet
and chest components can cause the product to tip which may result in personal injury or
product damage.
DO NOT use the product on uneven surfaces or inclines as this may cause the product to tip
or become unstable resulting in possible personal injury or product damage.
Remove work surface (if provided) before mounting top chest. If work surface is not
removed, the top chest may slide off cabinet causing personal injury or product damage.
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YE. U.K. www.drapertools.com e-mail: [email protected]
RWKC240114
2. PREPARING THE TOOL CHEST
2.1 PUSH BAR ATTACHMENT (ROLLER (FIG. 1
CABINETS ONLY) - FIG. 1 = ==
NOTE: Holes in the unit are tapped requiring no nuts for | eal
installation. o &quot;Г r= -
Attach the handle using four(M8X25) hex screws. Do not Emme — &gt;
over tighten the screws. ‘у
2.2 REMOVING AND INSTALLING DRAWERS - \ /
FIG. 2
Completely empty the drawer. (FIG.2 &gt;
Fully extend drawer. — Left hocking LAD
LEFT SIDE: Push the locking tab down and hold. CU 34 ‘|
RIGHT SIDE: Pull the locking tab up and hold. X
Pull out the drawer to remove. | 1
To reinstall, push the drawer into the slides until the
drawer stops.
Rog :
EE hm bal |)
2.3 TO REMOVE THE SLIDE - FIGS. 3-4
From the unit, first remove the drawer (follow the (FIG.3
drawer removal procedure).
Turn the slide to the left (right) and hold.
Push the slide up to disengage Tab &quot;A&quot; from Slot &quot;A&quot;.
Push the slide along to release Tab &quot;B&quot; into Slot &quot;B&quot;.
The slide may now be removed.
Wu OUTSIDE J
2.4 TO REINSTALL THE SLIDE
Place the slide in the appropriate position, pull the slide
and engage Tab &quot;B&quot; into Slot &quot;B&quot;, then push the slide (FIG.4 Da
down to lock Tab &quot;A&quot; into Slot &quot;A&quot;.
mes TE Y
n= J
| E
2.5 LUBRICATION Ta
To ensure smooth operation of the sliders, lubricate Da
periodically with a light grease. Do this at least twice a INSIDE
year. Ч J
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. www.drapertools.com e-mail: [email protected]
RWKC240114
">

Hello! I am an AI chatbot specifically trained to assist you with the Draper Tool Chest Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Push bar attachment
Drawer removal and installation
Slide removal and installation
Lubrication
Locking mechanism

Frequently asked questions

The push bar attaches using four (M8X25) hex screws. Ensure screws are not over tightened.

To remove a drawer, fully extend it, push down the locking tab on the left side, pull up the locking tab on the right side, and pull the drawer out. To reinstall, push the drawer into the slides until it stops.

To remove a slide, first remove the drawer. Turn the slide to the left and hold, push up to disengage Tab "A" from Slot "A", push slide along to release Tab "B" into Slot "B". To reinstall, place the slide in the appropriate position, pull the slide and engage Tab "B" into Slot "B", then push down to lock Tab "A" into Slot "A".