Logicube CellDEK User's Manual
Below you will find brief information for CellDEK. CellDEK is a forensically sound mobile phone and PDA data extraction tool, able to obtain real time intelligence from a mobile handset at a scene. Designed to extract as much information as possible in a forensic manner and disclose any other information which might be present but has not been extracted, it is aimed at getting information immediately from the mobile handset to help move forward an investigation.
Advertisement
Advertisement
CellDEK® User Manual
CellDEK User’s Manual
Version: 1.29
Date: 07/2014
I
Limitation of Liability and Warranty Information
Logicube Disclaimer
LOGICUBE IS NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING, BUT NOT LIMITED TO PROPERTY DAMAGE, LOSS OF TIME OR DATA
FROM USE OF A LOGICUBE PRODUCT, OR ANY OTHER DAMAGES RESULTING
FROM PRODUCT MALFUNCTION OR FAILURE OF (INCLUDING WITHOUT LIMITATION,
THOSE RESULTING FROM: (1) RELIANCE ON THE MATERIALS PRESENTED, (2) COSTS
OF REPLACEMENT GOODS, (3) LOSS OF USE, DATA OR PROFITS, (4) DELAYS OR
BUSINESS INTERRUPTIONS, (5) AND ANY THEORY OF LIABILITY, ARISING OUT OF OR
IN CONNECTION WITH THE USE OR PERFORMANCE (OR FROM DELAYS IN
SERVICING OR INABILITY TO RENDER SERVICE ON ANY) LOGICUBE PRODUCT.
LOGICUBE MAKES EVERY EFFORT TO ENSURE PROPER OPERATION OF ALL
PRODUCTS. HOWEVER, THE CUSTOMER IS RESPONSIBLE TO VERIFY THAT THE OUTPUT
OF LOGICUBE PRODUCT MEETS THE CUSTOMER’S QUALITY REQUIREMENT. THE
CUSTOMER FURTHER ACKNOWLEDGES THAT IMPROPER OPERATION OF LOGICUBE
PRODUCT AND/OR SOFTWARE, OR HARDWARE PROBLEMS, CAN CAUSE LOSS OF
DATA, DEFECTIVE FORMATTING, OR DATA LOADING. LOGICUBE WILL MAKE
EFFORTS TO SOLVE OR REPAIR ANY PROBLEMS IDENTIFIED BY CUSTOMER, EITHER
UNDER WARRANTY OR ON A TIME AND MATERIALS BASIS.
IMPORTANT NOTICE: PLEASE READ CAREFULLY
USE OF THE CELLDEK OR CELLDEK TEK DEVICE TO GAIN UNAUTHORIZED ACCESS
TO A COMPUTER, TELEPHONE OR PDA MAY VIOLATE VARIOUS UNITED STATES
FEDERAL AND STATE CRIMINAL STATUTES AND/OR UK STATUTES, INCLUDING,
WITHOUT LIMITATION, THE COMPUTER FRAUD AND ABUSE ACT, PUB L. NO. 98-473,
98 STAT. 2190; 18 U.S.C. §§ 1029, ET SEQ. AND VARIOUS UK STATUES SUCH AS THE
COMPUTER MISUSE ACT 1980, COMMUNICATION CT 2003 AND THE REGULATION
OF INVESTIGATORY POWERS ACT 2000.
BY OPENING OF THE ATTACHED PACKAGE, CUSTOMER AGREES THAT:
(A) THE CELLDEK DEVICE WILL ONLY BE USED IN A LAWFUL MANNER;
CellDEK® User Manual I
(B) CUSTOMER WILL INDEMNIFY AND HOLD HARMLESS SELLER FROM ALL
FEES, EXPENSES, LOSSES, LIABILITIES AND DAMAGES INCLUDING, WITHOUT
LIMITATION, LEGAL FEES RESULTING FROM A BREACH OR VIOLATION OF THE
FOREGOING.
Warranty
LOGICUBE PROVIDES A BASIC ONE-YEAR PARTS AND LABOR WARRANTY FOR ALL
OF ITS PRODUCTS (EXCLUDING CABLES, ADAPTERS AND OTHER “CONSUMABLE”
ITEMS). A ONE-YEAR EXTENDED WARRANTY IS ALSO AVAILABLE FOR AN ADDED
COST. TELEPHONE AND EMAIL SUPPORT IS AVAILABLE FOR THE LIFE OF THE
PRODUCT AS DEFINED BY LOGICUBE. MODIFYING OR TAMPERING WITH THE
HARDWARE AND/OR SOFTWARE OF THE PRODUCT WILL VOID THE WARRANTY.
For further assistance please contact Logicube Technical Support at:+1-818-700-8488, or by email to [email protected]. Phone support is available 7AM-5PM weekdays (excluding US national holidays)
Logicube RoHS Compliance Statement
LOGICUBE PRODUCTS COMPLY WITH THE EUROPEAN UNION RESTRICTION
OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRONIC
EQUIPMENT, ROHS DIRECTIVE (2002/95/EC).
THE ROHS DIRECTIVE PROHIBITS THE SALE OF CERTAIN ELECTRONIC
EQUIPMENT CONTAINING SOME HAZARDOUS SUBSTANCES SUCH AS
MERCURY, LEAD, CADMIUM, HEXAVALENT CHROMIUM AND CERTAIN FLAME-
RETARDANTS IN THE EUROPEAN UNION. THIS DIRECTIVE APPLIES TO
ELECTRONIC PRODUCTS PLACED ON THE EU MARKET AFTER JULY 1, 2006.
Logicube Declaration of Conformity
LOGICUBE DECLARES THAT THIS PRODUCT MEETS ALL
APPROPRIATE EUROPEAN UNION (EU) HEALTH, SAFETY, AND
ENVIRONMENTAL REQUIREMENTS, WHICH ENSURE CONSUMER
AND WORKPLACE SAFETY. IT IS IN COMPLIENCE WITH ALL
CellDEK® User Manual II
REQUIREMENTS AND PROVISIONS OF DIRECTIVE 89/336/EEC, AND
ALL OTHER RELEVANT DIRECTIVES.
PLEASE CONTACT LOGICUBE, INC. FOR A COPY OF THIS DECLARATION.
End User License Agreement (EULA)
LOGICUBE, INC. OWNS THE CELLDEK SOFTWARE AND HEREBY GRANTS THE
LICENSEE A LIMITED, PERPETUAL, NON-EXCLUSIVE AND NON-TRANSFERABLE
LICENSE TO USE THE SOFTWARE SOLELY IN THE COURSE OF LAWFULLY
OPERATING THE DEVICE WITH WHICH THE SOFTWARE IS INTEGRATED, AND
FOR NO OTHER PURPOSE. A COPY OF THE LICENSE MAY BE VIEWED FROM
WITHIN THE CELLDEK APPLICATION AND THE END USER WILL BE PROMPTED
TO ACCEPT THE TERMS OF THE LICENSE PRIOR TO INITIAL USE OF THE
DEVICE. A COPY OF THE LICENSE IS INCLUDED IN THE USERS MANUAL OR YOU
MAY CONTACT LOGICUBE, INC. FOR A COPY.
THE DEVICE ALSO CONTAINS AN EMBEDDED PC. THE END USER SOFTWARE
LICENSE AGREEMENT FOR SOFTWARE CONTAINED WITHIN THE EMBEDDED PC
IS PROVIDED AS A PAPER LICENSE ALONG WITH THE CELLDEK DEVICE IN THE
ATTACHED PACKAGE. BY USING THE SOFTWARE YOU AGREE TO BE BOUND BY
THE TERMS OF THE APPLICABLE LICENSE AGREEMENT. THIS LICENCE COVERS
THE OPERATING SYSTEM THAT SUPPORTS THE CELLDEK DEVICE SOFTWARE
AND ANY OTHER SOFTWARE CONTAINED ON THE EMBEDDED LAPTOP. PLEASE
NOTE THE WARRANTY RESTRICTIONS ON ACCESSING THE EMBEDDED PC. A
COPY OF THIS LICENSE IS ALSO AVAILABLE FROM LOGICUBE, INC.
NOTE: Opening the CellDEK faceplate to access the embedded PC will void the warranty.
NOTE: “Hacking” the CellDEK application to access the embedded PC’s Operating System will also void the warranty. Logicube can reload the CellDEK application for a substantial fee.
CellDEK® User Manual III
TABLE OF CONTENTS
Table of Contents
......................................................................................................................................................................... I
LIMITATION OF LIABILITY AND WARRANTY INFORMATION .................................................. I
LOGICUBE DISCLAIMER ......................................................................................................................... I
IMPORTANT NOTICE: PLEASE READ CAREFULLY ......................................................................... I
WARRANTY ............................................................................................................................................... II
LOGICUBE ROHS COMPLIANCE STATEMENT ............................................................................... II
LOGICUBE DECLARATION OF CONFORMITY ............................................................................... II
END USER LICENSE AGREEMENT (EULA) ...................................................................................... III
TABLE OF CONTENTS .............................................................................................................................. I
1. INTRODUCTION TO CELLDEK ......................................................................................................... 5
INTRODUCTION ......................................................................................................................................... 5
R ECOMMENDED USE OF C ELL DEK ............................................................................................................. 6
F EATURES ................................................................................................................................................... 6
U SING THIS GUIDE ....................................................................................................................................... 6
S YSTEM DESCRIPTION ................................................................................................................................. 7
2. GETTING STARTED .............................................................................................................................. 8
OVERVIEW OF THE CELLDEK ............................................................................................................. 8
SETTING UP CELLDEK ........................................................................................................................... 9
B ATTERY S TATUS ....................................................................................................................................... 9
C HARGING C ELL DEK ................................................................................................................................10
P OWERING U P C ELL DEK ...........................................................................................................................10
V IRUS P ROTECTION ....................................................................................................................................12
Installation .............................................................................................................................................12
Virus Updates ........................................................................................................................................12
Virus Checker ........................................................................................................................................13
Introduction ...........................................................................................................................................13
Checking for Infection ...........................................................................................................................13
Windows Malicious Software Removal Tool Screen Shots ....................................................................15
C ELL DEK O PERATION ...............................................................................................................................16
T OUCH S CREEN C ALIBRATION ...................................................................................................................16
Calibrating the Asus model ...................................................................................................................16
Calibrating the Fujitsu model ................................................................................................................17
Calibrating the Panasonic model ..........................................................................................................18
IDENTIFYING A TARGET DEVICE ......................................................................................................19
A TTACHING A C ELLULAR P HONE ...............................................................................................................19
Physical Extraction ...............................................................................................................................20
Logical Extraction .................................................................................................................................21
G ENERIC E XTRACTION M ODULE ................................................................................................................24
A TTACHING A PDA ....................................................................................................................................25
SIM C ARD E XTRACTION ............................................................................................................................27
SIM PIN and PUK Codes ......................................................................................................................28
Dual SIM Extracted Data ......................................................................................................................28
A TTACHING A M EMORY F LASH C ARD .......................................................................................................30
Imaging Flash Media ............................................................................................................................32
CellDEK® User Manual I
TABLE OF CONTENTS
A TTACHING A GPS D EVICE ........................................................................................................................32
Generic GPS Extraction ........................................................................................................................34
GPS Track Logs .....................................................................................................................................35
Opening GPSData.gpx Output Files in Google Earth...........................................................................36
Geo-Tag Data from Images ...................................................................................................................39
A TTACHING AN A PPLE D EVICE ..................................................................................................................40
CONNECTION OPTIONS .........................................................................................................................40
H ELPER I CONS ............................................................................................................................................41
C ABLE C ONNECTION ..................................................................................................................................41
I NFRARED (IR) C ONNECTION (C ELL P HONES AND PDA S ) ..........................................................................42
B LUETOOTH C ONNECTION .........................................................................................................................43
Connecting to a Cell Phone via Bluetooth ............................................................................................43
C USTOM E XTRACTION ................................................................................................................................44
SIM C ARDS AND F LASH M EMORY C ARD C ONNECTION .............................................................................45
MAIN CONNECTIVITY ICONS ..............................................................................................................46
OTHER CONNECTIVITY ICONS .............................................................................................................46
NETWORK ISOLATION (NIC) CARDS AND SIM CARD ID CLONING .........................................47
SIM C ARD ID C LONING S TEP BY STEP ......................................................................................................48
Create from Existing SIM ......................................................................................................................48
Manually enter NIC data .......................................................................................................................50
Create a test NIC ...................................................................................................................................52
EXTRACTION WITHOUT A SIM CARD .................................................................................................53
CAPTURING NOKIA HANDSETS ..........................................................................................................54
N OKIA CA-42 C ABLE I NSTALLATION .........................................................................................................54
N OKIA F LASH A DAPTERS ...........................................................................................................................54
Attaching Nokia Flash Adapters ............................................................................................................54
3. CAPTURING DATA ...............................................................................................................................58
CASE DETAILS ..........................................................................................................................................58
O THER N OTES ............................................................................................................................................59
DATA EXTRACTION ................................................................................................................................59
S EARCHING FOR D RIVERS ..........................................................................................................................59
S TANDARD D ATA E XTRACTION .................................................................................................................60
A BORT C APTURE ........................................................................................................................................60
E XTENDED D ATA E XTRACTION ..................................................................................................................61
S UPPORT FOR N ON -L ATIN L ANGUAGES .....................................................................................................62
Special Note for Motorola and Sony Ericsson .......................................................................................63
OTHER DATA EXTRACTION NOTES ...................................................................................................63
SQL ITE V IEWER .........................................................................................................................................63
A NDROID D EVICES .....................................................................................................................................65
Samsung Galaxy S3 ...............................................................................................................................65
Android Ad-hoc device rooting ..............................................................................................................66
Android Email .......................................................................................................................................68
Android App Data..................................................................................................................................68
Android Location Information ...............................................................................................................69
Android files of Interest .........................................................................................................................69
D ATA C APTURE FROM A PPLE I P HONE ........................................................................................................70
PL IST V IEWER ............................................................................................................................................70
CellDEK® User Manual II
TABLE OF CONTENTS iPhone Passcode Bypass .......................................................................................................................71
iPhone App Data ...................................................................................................................................73
iPhone Dictionary Data.........................................................................................................................73
Apple Location Information...................................................................................................................73
iPhone files of Interest ...........................................................................................................................73
D ATA C APTURE FROM S YMBIAN OS ..........................................................................................................74
Capture from Symbian UIQ 2 nd
& 3 rd
Edition OS .................................................................................75
Symbian Event Logs ..............................................................................................................................76
D ATA C APTURE FROM S ONY E RICSSON P HONES ........................................................................................77
B LACKBERRY PIN L OCK ............................................................................................................................77
Blackberry PIN Numbers.......................................................................................................................78
T IME /D ATE S TAMPS FROM M OTOROLA P HONES ........................................................................................78
N ULL R ESPONSE FROM S IEMENS HANDSETS ...............................................................................................78
SMS A TTACHED C ONTENT ........................................................................................................................79
V ARIOUS W INDOWS M OBILE D EVICES ......................................................................................................80
O THER E XTRACTION N OTES .......................................................................................................................80
4. ANALYZING CAPTURED DATA .......................................................................................................81
DISPLAYING EXTRACTED DATA ........................................................................................................81
K EYWORD S EARCH ....................................................................................................................................84
V IEWING E XTRACTED D ATA ......................................................................................................................86
D ISPLAYING P REVIOUS E XTRACTIONS .......................................................................................................87
THE AUDIT TRAIL ...................................................................................................................................88
THE EXAMINATION REPORT ..............................................................................................................88
PRINTING REPORTS ...............................................................................................................................88
C ONNECTING A P RINTER TO C ELL DEK ......................................................................................................88
Supported Printers.................................................................................................................................89
5. OTHER FEATURES ..............................................................................................................................90
MAIN APPLICATION SCREEN ..............................................................................................................90
MANAGE FILES ........................................................................................................................................90
Extraction File Backup to CD ...............................................................................................................96
SOFTWARE UPDATE INSTRUCTIONS ................................................................................................98
I
C ELL DEK S OFTWARE U PDATE I NSTRUCTIONS ..........................................................................................98
T UNES I NFORMATION AND U PDATES ........................................................................................................99
SYSTEM SETUP .......................................................................................................................................100
L OGICAL E XTRACTION .............................................................................................................................100
P HYSICAL E XTRACTION ...........................................................................................................................102
R EPORT B UTTON ......................................................................................................................................103
On Screen Report Settings ...................................................................................................................103
Output Report Settings ........................................................................................................................104
Security Button ....................................................................................................................................104
Information Button ..............................................................................................................................106
Virus Check .........................................................................................................................................106
AUXILIARY POWER PORT ..................................................................................................................107
SHUTTING DOWN CELLDEK ..............................................................................................................107
S TANDBY M ODE .......................................................................................................................................107
6. GLOSSARY AND TROUBLESHOOTING GUIDE .........................................................................108
CellDEK® User Manual III
TABLE OF CONTENTS
SUPPORTED MANUFACTURERS .......................................................................................................108
GLOSSARY ...............................................................................................................................................108
TROUBLESHOOTING GUIDE ..............................................................................................................110
ERROR MESSAGES ................................................................................................................................111
7. SUPPORTED HANDSETS ..................................................................................................................112
HANDSETS TESTED ON CELLDEK AND THE RESULTS VERIFIED .........................................112
HANDSETS – EXPECTED SUPPORT .................................................................................................148
HANDSETS – OTHER .............................................................................................................................158
GPS DEVICE – VERIFIED CELLDEK SUPPORT ..............................................................................158
ADDITIONAL CABLE SUPPORT FOR PDAS ....................................................................................160
8. INDEX ....................................................................................................................................................162
9. CELLDEK SOFTWARE LICENSE ...................................................................................................164
CELLDEK SOFTWARE LICENSE - EU ...............................................................................................164
CELLDEK SOFTWARE LICENSE - US ...............................................................................................172
GNU GENERAL PUBLIC LICENSE .....................................................................................................175
CELLDEK HARDWARE LICENSES ....................................................................................................181
TECHNICAL SUPPORT INFORMATION ............................................................................................186
CellDEK® User Manual IV
Introduction
1. Introduction to CellDEK
CellDEK
Congratulations on your purchase of CellDEK. This unit will provide many years of dependable service if used properly. It is designed to be utilized by the expert and novice alike.
CellDEK stands for Cellular Data Extraction Kit. It is designed to carry out data extractions from cell phones, Satellite Navigation Devices, PDA ’s, SIM cards and flash based media.
Data can be extracted from phones and PDAs using three connection methods; data cables, infrared ports or Bluetooth radio frequency communications. The target devices may connect to CellDEK by one, two or all three of these methods.
The CellDEK software also helps with easy identification of the target device and informs the user of available connection methods. The user can select the preferred connection method. Historically, data cable connection has been time-consuming as it can be difficult to locate and identify the correct data cable for the target device. CellDEK eliminates this by using a set of intelligent data cable connectors. Once the target device has been identified,
CellDEK® User Manual 5
INTRODUCTION
CellDEK automatically selects the correct data cable connecter from the connector rack.
This is a fast and reliable data cable connector selection process.
Recommended use of CellDEK
CellDEK is a forensically sound mobile phone and PDA data extraction tool, able to obtain real time intelligence from a mobile handset at a scene.
It is designed to extract as much information as possible in a forensic manner and disclose any other information which might be present but has not been extracted. It is aimed at getting information immediately from the mobile handset to help move forward an investigation. CellDEK has been designed with a full audit trail allowing users to demonstrate when actions were taken. The examination is write-protected to ensure that information cannot be written to the handset or media card.
CellDEK has been tested on a large range of handsets and its capabilities are displayed during the data extraction process. The tests have verified that CellDEK extracts data reliably. The User should consult this information to ensure that the captured data meets their needs
Users should consider using CellDEK in an appropriate environment to prevent any messages or calls being received which will change the data on the handset. This can also be considered as interception. The user should consult with their local authorities for recommendations on legal implication of intercepting data in the context of their examinations.
There are several changes to handsets that will result from examination by
CellDEK.
If an unread SMS is opened during the examination process, the unread SMS status will change to read on the phone or SIM card.
However CellDEK will report the original status of the message.
CellDEK operation will remove the missed call message or symbol from the handset.
Bluetooth acquisitions will leave the extracting device name in the
“trusted devices” list in the handset Bluetooth menu.
The extraction of SMS messages can be skipped thus preventing these changes to the data on the handset.
Features
Able to connect to a wide variety of cellular phone, Satellite
Navigation, SmartPhones, PDA (Personal Digital Assistant) and
Flash Memory devices.
Direct connection via cable, IR (Infrared) or Bluetooth.
Built-in cellular phone identification module.
Water-resistant, rugged carrying case.
Embedded PC with 30GB of storage.
MD5 Hash to ensure that captured data is not tampered with.
Using this guide
This user guide is made up of 6 sections:
CellDEK® User Manual 6
INTRODUCTION
Introduction
Getting Started (Fast Start)
Capturing Data
Analyzing Captured Data
Other Features
FAQ’s and Troubleshooting Guide
System description
The CellDEK system is packed in a rugged, water-resistant carrying case.
Inside, you will find the following components:
Embedded PC built into the case.
A stylus for use with the embedded PC’s touch screen.
A set of intelligent data cables, which are able to connect to a variety of cellular phones. These cables are stored in sequential holders built into the case lid.
1 Nokia CA-42 Cable.
Nokia Flash Adapters.
A SIM card adapter.
An AC power adapter that charges the internal battery of CellDEK .
A Network Isolation Card (NIC), which is used to isolate a target device from the network.
This manual.
NOTE: Opening the CellDEK faceplate to access the embedded PC will void the warranty.
NOTE: “Hacking” the CellDEK application to access the embedded PC’s
Operating System will also void the warranty. Logicube can reload the
CellDEK application for a substantial fee.
CellDEK® User Manual 7
Overview of the CellDEK
2. Getting Started
CellDEK Overview
1. TOUCH SCREEN - All of the CellDEK software and user input is controlled from here.
2. AC POWER SOCKET – The AC power supply plugs into this socket. The power supply charges the CellDEK battery.
3. RULER – This ruler is used to measure the dimensions of a suspect wireless device.
It is printed in mm and inches.
4. STYLUS – This can be used on the touch screen instead of the user’s finger. It is more precise and keeps the display clean.
5. CELL PHONE – This is one of many types of cellular phones that can be connected to the CellDEK with one of the included adapter cables.
6. PHONE CABLE ADAPTER STORAGE – This rack is for cell phone adapter cables that are not currently in use. It is also where the CellDEK detects the adapter cable prior to a capture.
CellDEK® User Manual 8
CAPTURING DATA
7. USB PORT – This USB port is used to connect an external USB drive for data backup purposes. When used to extract data from a USB drive, the port becomes write-protected.
8. INFRARED (IR) EMITTER – During an infrared capture, the wireless device’s IR port is pointed toward this emitter
9. EXTERNAL MONITOR JACK – An external PC monitor can be plugged into this port.
10. DC POWER PORT – This is a 12VDC power socket that can be used to power external devices like a jammer, light source, etc.
11. FLASH MEMORY CARD SLOTS – These ports work for CF, SD, SM and Memory
Stick cards. Additional Flash memory cards of different types can be attached via an adapter. The slots are write-protected.
NOTE: Other flash-based media cards (i.e. transflash cards) can be read in an adapter that connects to one of the existing card reader slots. Such adapters are available in any electronic store.
12. SIM CARD ADAPTER SLOT – This port allows users to capture data directly off the
SIM or USIM card. A SIM card adapter is provided for this purpose.
13. PHONE CABLE JACK – When CellDEK illuminates the correct adapter; it gets plugged into this slot.
14. STORAGE AREA – This compartment can be used to hold extra items, adapters, cables, etc. It also contains a bag with additional adapters that extend the functionality of certain cables and the DKU Nokia cable.
NOTE: The CellDEK case lid should always remain closed when the unit is charging or not in use.
Setting Up CellDEK
Battery Status
Before CellDEK is powered up for the very first time; it needs to have the battery charged. Attach the AC cable into the AC socket and connect the other end to an AC wall outlet. Make sure that the CellDEK case is closed. Allow CellDEK to charge for 24 hours prior to use.
The CellDEK main application screen displays the battery life of the unit.
When the battery has depleted to around 5%, CellDEK will alert the user to carry out a recharge. When the battery level drops below this state,
CellDEK will shut down and will not restart correctly until the unit is charged. The image below shows that the CellDEK battery is about 90% charged:
CellDEK® User Manual
Battery Recharge State
9
CAPTURING DATA
Charging CellDEK
CellDEK may be charged with the included AC power supply. The power supply can be plugged into 110 or 230 VAC power.
Normal charge time = 8 Hours – A full charge will give 3 hours of usage.
NOTE: The CellDEK lid should always remain closed when the unit is charging or not in use.
Powering Up CellDEK
CellDEK is designed to boot quickly and with minimal fuss. The procedure is as follows:
1. The power switch only moves vertically and is located next to this symbol.
Power symbol
2. Slide the switch in an upwards direction and let it go. CellDEK will initialize and boot-up the CellDEK application.
3. At the login prompt, type CellDEK for the user name and leave the password blank. This is the operator login.
NOTE: The operator login restricts the use of the device operating system solely for use of the CellDEK application. The operator does not have access to the operating system settings.
NOTE: Ac cessing the embedded PC’s Operating System for purposes other than running the CellDEK application will void the warranty.
4. The EULA (End User License Agreement) will appear.
CellDEK® User Manual 10
CAPTURING DATA
5.
End User License Agreement
CellDEK will boot to the Main Application Menu.
CellDEK® User Manual
CellDEK Main Application Screen
11
CAPTURING DATA
Virus Protection
To enhance the security of the data held on CellDEK it is recommended that the user installs virus protection software on the unit. The user may install virus protection of their choice through the Windows interface.
Installation
There are three possible ways to gain access to the windows desktop from the main CellDEK application:
Insert a USB keyboard and press the return key
If your CellDEK’s screen has option buttons to the right of the screen, press the screen option buttons 1 and 4 simultaneously which are located at the bottom right corner of the screen.
If neither of the above ways work, open the storage compartment and locate the target
('bull's-eye' button) located in the top left hand corner of the compartment.
When on the windows desktop you will need to run
'Shortcut to HideStartBar.exe' located on the desktop
(this may be located inside the unused desktop items folder).
The virus software can then be installed using a CD drive or from a USB thumb drive following the providers installation instructions.
Virus Updates
To gain access to the windows desktop from the main CellDEK application press the following where applicable:
Virus protection software requires regular updates in order to recognize the latest virus threats. The update method can vary but usually requires an update file to be downloaded on an internet PC. This update file can then be copied to the CellDEK desktop folder and the virus settings can be set to point to the location. When the update option is selected in the virus software, the software will retrieve the file from the desktop folder rather than from the internet. The desktop folder contents can then be updated daily, weekly or when required.
If virus protection software is installed we recommend that the system is monitored for changes in performance to the CellDEK application. If the system performance is affected it may be necessary to adjust the virus software settings to enable CellDEK to operate without restriction.
CellDEK® User Manual 12
CAPTURING DATA
Virus Checker
A virus check option has been included within the system setup menu.
The user can now run a malware removal tool to check for virus infection.
Introduction
Computer viruses are very common, easily spread and can be difficult to remove. Viruses can cause damage to computer systems by corrupting files, changing information and gathering personal data. Generally, virus files can only infect a system if the file is executed. This briefing note has been produced to help identify infection of your CellDEK unit.
Checking for Infection
CellDEK software 1.16 and newer enables the user to run a regular virus check on the system within the system setup screen. On selection, the ‘Virus
Check’ will request for a USB key to be inserted that contains the latest virus removal tool. The selected tool will be copied to memory and can be updated at any time using the update button.
CellDEK System Setup Screen
CellDEK® User Manual 13
CAPTURING DATA
CellDEK® User Manual
Virus Check Screen
A suitable free tool produced by Microsoft is listed below.
This tool checks for specific, prevalent malicious software and helps remove any infection found. This tool can be downloaded directly from the Microsoft website and is updated with the latest virus definitions on the second Tuesday of each month: http://www.microsoft.com/security/malwareremove/default.aspx
Please note that this tool may not remove all known viruses. Other antivirus software may be required to remove specific viruses or malware not covered by this tool. Instructions on how to install antivirus programs through the Windows interface within
CellDEK can be found in the CellDEK Users’ Guide.
Note: The Microsoft Windows Malicious Software
Removal Tool is a single .exe file that is used to locate and remove an infection only. It will not install on the
CellDEK system and will not actively protect the CellDEK from further infection.
IMPORTANT: Other virus checking tools that have not been tested by the CellDEK team are available. Please proceed with caution when using untested software. If the system performance is affected it may be necessary to adjust the virus software settings or remove entirely to enable CellDEK to operate without restriction. Logicube is not liable for damages or lost files when using untested software.
14
CAPTURING DATA
Windows Malicious Software Removal Tool Screen Shots
Windows Malicious Software Removal Tool
To prevent changes to the evidential data content in the data files folder the user can select a custom scan and choose to scan system folders only*.
CellDEK® User Manual
Windows Malicious Software Removal Tool cont’d.
*Carrying out a full or quick scan may result in files that have been identified by the Microsoft Windows Malicious
Software Removal Tool as ‘malicious’, to be removed from the CellDEK system. To protect evidential files you may wish to isolate the data files folder from the scan by selecting the customized option.
Data Files folder location: C://Program Files/FSS/CellDEK/Data Files
Note: Any files identified as ’malicious’ that are removed from the data files folder during the scan will remain listed as downloaded in the
CellDEK report.
15
CellDEK Operation
CAPTURING DATA
Using the CellDEK stylus
The CellDEK is operated via a touch screen interface. A stylus is included and is stored in a holder located directly above the touch screen.
NOTE: The CellDEK lid should always remain closed when the unit is charging or not in use.
Touch Screen Calibration
The touch screen on the CellDEK can be calibrated. There are two sets of instructions that can be followed to perform a touch screen calibration depending on the CellDEK you have.
Asus tablet – CellDEKs that have the power switch on the bottom right hand corner of the display.
Fujitsu tablet - CellDEKs that have power switch on the top right hand corner of the display.
Panasonic tablet - CellDEKs that require you to open the storage area to turn the power on.
Calibrating the Asus model
1. Turn the CellDEK.
2. On the Windows Log On screen, tap OK to log on to
Windows.
3. The End User License Agreement should appear.
Do not do anything to the License Agreement. Do not close it. Do not click OK.
4. On the Windows desktop, double-tap the Hide
StartBar icon. If you cannot locate it on the desktop, look for a folder called “Unused Icons”. Double-tap that folder and see if the Hide StartBar icon is there.
After double-tapping the Hide StartBar, the Windows
CellDEK® User Manual 16
CellDEK® User Manual
CAPTURING DATA
Start button should appear on the bottom left of the screen.
5. Tap the Windows Start button.
6. Locate and tap Touch Panel Tool on the left side. If this cannot be found, tap All Programs then the
Touch Panel Tool folder. In that folder, you will find the program called Touch Panel Tool.
7. The Touch Panel Tool window will appear.
NOTE: The Touch Panel Tool window may appear behind the End User License Agreement (EULA) window. If this happens, tap the Touch Panel Tool window to bring it in front of the EULA.
8. In the Calibration section, make sure 9 Points is selected.
9. Tap the Calibration button. The calibration screen will appear.
10. Tap the blinking symbol until it beeps or stops blinking. There will be a total of 9 symbols to tap.
11. After the 9 th
symbol, the calibration screen will close and you will see the Touch Panel Tool window.
12. Tap the Hide button to hide the Touch Panel Tool window.
13. Accept the End User License Agreement to load the
CellDEK software.
Calibrating the Fujitsu model
1. Turn the CellDEK on.
2. On the Windows Log On screen, tap OK to log on to
Windows.
3. The End User License Agreement should appear.
Do not do anything to the License Agreement. Do not close it. Do not click OK.
4. Double-tap the Hide StartBar icon. If you cannot locate it on the desktop, look for a folder called
“Unused Icons”. Double-tap that folder and see if the
Hide StartBar icon is there. After double-tapping the
Hide StartBar, the Windows Start button should appear on the bottom left of the screen.
5. Tap the Start button.
6. Tap Control Panel.
7. In the Control Panel, double-tap Tablet Calibration.
8. Follow the instructions on the screen, touching the red + marks. There will be 9 of them (3 rows (top, middle, and bottom) and 3 columns (left, middle, and right).
9. When you are done with the 9 th
mark, a pop will appear “Calibration is succeeded. Settings change is effective after system restart ”.
17
CellDEK® User Manual
CAPTURING DATA
10. Tap OK, and close Control Panel window.
11. Re-start system in order for settings to take effect.
Start, Shut Down.
12. Once re-started tap OK on Windows log in.
13. Tap OK on the End User License Agreement to load the CellDEK software.
Calibrating the Panasonic model
Note: The steps below require a USB keyboard.
1. Turn the CellDEK on.
2. On the Windows Log On screen, tap OK to log on to
Windows.
3. The End User License Agreement should appear.
Do not do anything to the License Agreement. Do not close it. Do not click OK.
4. Attach the USB keyboard to the USB port.
5. Double-tap the Hide StartBar icon. If you cannot locate it on the desktop, look for a folder called
“Unused Icons”. Double-tap that folder and see if the
Hide StartBar icon is there. After double-tapping the
Hide StartBar, the Windows Start button should appear on the bottom left of the screen.
6. Tap the Start button.
7. Tap Control Panel.
8. In the Control Panel, double-tap Mouse.
9. In the Mouse Properties window, tap the
TouchScreen tab.
10. In the Calibration & Test section, tap the Calibration button. The screen should go into calibration mode.
11. Follow the instructions on the screen, touching the red + marks. There will be 9 of them (3 rows (top, middle, and bottom) and 3 columns (left, middle, and right).
12. When you are done with the 9 th
mark, the mark will go back to the top left. At this point, press the Enter key on the keyboard and it will bring you back to the
Mouse Properties window.
13. Tap OK to close the Mouse Properties window and close the Control Panel window.
14. Tap OK on the End User License Agreement to load the CellDEK software.
18
CAPTURING DATA
Identifying a Target Device
Target devices can be difficult to identify. Many show the manufactur er’s name or logo, but not the model name or number. This information is usually displayed behind the battery of the target device. To view the label, the target device would be powered down and the battery removed.
On power-up a PIN or PUK number may be required to unlock the target device. This number can be obtained from the device’s network service provider by authorized law enforcement personnel.
Identification of the target device is required to determine which connection methods are available (e.g. cable, infrared or Bluetooth) and for data cables, the specific cable connector.
Attaching a Cellular Phone
Begin by tapping the Read New Device button on the Main Application
Screen. The Device Type Selection screen will appear.
Device Type Selection
Tap the Cell Phone button. The next screen prompts the user to choose either logical or physical extraction.
CellDEK® User Manual
Extraction Type
19
CAPTURING DATA
Select Logical Extraction for most phones. Physical Extraction is available for Android devices and the Nokia 1100 only.
Physical Extraction
If Physical Extraction is selected, the following screen will appear:
O/S or Chipset screen
Select By O/S. This is the only option that is selectable.
‘By Chipset’ is only available with the Logicube
CellXtract-TNT. Visit http://www.logicube.com/shop/cellxtract-tnt/ for more information on the CellXtract-TNT.
CellDEK® User Manual
O/S Type
Select either Android O/S or Nokia 1100. If Android O/S is selected, follow the on-screen instructions on an
Android O/S physical extraction.
20
CAPTURING DATA
Logical Extraction
If Logical Extraction is selected, the manufacturer list will appear. If the manufacturer is unknown, the search is carried out on all manufacturers.
For a given manufacturer, CellDEK helps to identify the target cellular phone as follows:
Selection from a model list
Selection from model images
Selection from a “short list” of model images based on entered dimensions.
Cell Phone Manufacturer
Once the manufacturer is chosen, the Cell Phone Selection
Screen will appear.
CellDEK® User Manual
Cell Phone Selection
If the user knows the model of the cell phone, then the
List Models option should be selected. A list will come up of all known models.
21
CAPTURING DATA
Cell Phone Model List
Scroll down the list and select the model number of the cell phone.
If the model is unknown, images of all models for the chosen manufacturer are obtained by selecting View
Models.
CellDEK® User Manual
Cell Phone Models
NOTE: Fully verified and supported handsets are indicated by green “check marks”. Handsets that are not supported but are expected to work are indicated by amber check marks. Unverified handsets have no check mark; so treat extractions from these handsets as a minimum data extraction.
NOTE: Some handsets can use a Network Isolation card
(NIC) during capture. This feature is further explained in the Network Isolation Card (NIC) section later in this chapter.
22
CAPTURING DATA
Scroll down the list and choose the image that looks like the target cell phone.
You may be faced with a large list of cell phones. To narrow down the search, tap the Back button.
Select Refine List. The user has the option to apply two filters. The user can choose to apply either or both of these filters.
The first will narrow down the images shown using physical features of the phone (e.g. Does the phone have an antenna or camera and what type of phone is it? Clamshell, swivel, slide or bar).
The second or Input Dimensions filter is used to enter the physical dimensions of the target device (length, width, depth) using mm or inches. CellDEK TEK will display the models matching those dimensions or features (within a given tolerance and depending on which filter is used).
Enter Features
CellDEK® User Manual
Enter Dimensions
NOTE: There is a measuring ruler printed on the
CellDEK TEK in inches and mm.
23
CAPTURING DATA
NOTE: This screen will allow the user to enter the dimensions in mm, 1/8 inch or 1/16 inch increments.
Tap the Up and Down Arrows to change each filter. If the handset does not have one of the features, such as a camera, set the filter to “Ignore”.
When finished, tap the Display Phones button. CellDEK will display models matching those features.
Tap the model number or image to highlight it, and then tap the Select button. Refer to the “Connection
Options” section later in this chapter.
Generic Extraction Module
If the Other Button is chosen on the Cellphone
Extraction Screen, the Generic Extraction Module appears. This is used to extract from handsets that have not been identified or verified with CellDEK. This includes handsets where data could not be obtained from the known manufacturers as well as from unknown manufacturers.
The time taken for data extraction can take up to 30 minutes, depending on the amount of data.
The Generic Extraction Module only supports Bluetooth and Infrared connections.
CellDEK® User Manual
Generic Extraction Module
NOTE: Users should be aware that data extracted with the Generic Extraction Module is NOT validated. It is recommended that any data extracted using this method is visually verified by the User to ensure that no data is missed or misrepresented.
24
CAPTURING DATA
Attaching a PDA
Begin by tapping the Read New Device button on the
Main Application Screen. The Device Type Selection screen will appear.
Device Type Selection
Tap the “Cell Phone” button. The list of handsets and
Operating Systems will appear. Select the proper
Operating System (Android, Blackberry, Palm OS, or
Windows Mobile.
CellDEK® User Manual
Select PDA Type
Palm-based PDA ’s are supported by software version
1.9.0.0. and higher with the following caveats:
Extraction of SMS messages is currently not supported.
Extraction of user files is currently not supported.
CellDEK is able to collect the following information from
Palm devices: Contact Details, Call Logs (if available),
25
Female receptacle
CellDEK® User Manual
CAPTURING DATA
Calendars, Tasks, Notes and Palm Database (PDB) files. PDB files are where Palm OS keeps data stored in
RAM. The data is kept in database format. These files can contain user data.
Windows-based PDA ’s need to have Active Sync enabled before they can be set to Infrared mode. Please refer to the “Connecting via Infrared” section later in this chapter.
Blackberry devices can only connect via Cable. Please refer to the “Cable Connection” section later in this chapter.
NOTE: Blackberry devices that are password-protected will need to be unlocked before data can be extracted.
Please refer to the “Unlocking a Blackberry Device” section later in this chapter.
Most PDA ’s will need to connect to CellDEK via
Bluetooth instead of the other way around. Please refer to the “Connecting via Bluetooth” section later in this chapter.
Additional Cable Support for PDA ’s:
A set of 5 new PDA cable tips and a USB cable are available from: http://www.gomadic.com/celldek.html
These tips will enable the User to connect to a number of PDAs that are not supported by the current CellDEK cables. However, it must be noted that, although many of these PDAs are already supported by CellDEK via
Infrared, an extraction using a cable will provide a faster extraction. Appendix C lists the 150 PDAs that are supported by these cable tips.
Each tip can be placed into the female receptacle thus allowing a large range of tips to be connected to the same USB cable.
PDA Cable Tips
T
ip
26
USB Cable
CAPTURING DATA
SIM Card Extraction
NOTE: CellDEK supports, with software release 1.20.0.0 and above, the ability to clone an existing SIM card. This and other features using the
Network Isolation Card (NIC) are described in detail in the Network
Isolation (NIC) Cards section titled: Network Isolation (NIC) Cards and
SIM Card ID Cloning.
SIM Card extraction supports both SIM and USIM cards.
1. Begin by tapping the Read New Device button on the Main
Application Screen. The Device Type Selection screen will appear.
Device Type Selection
2. Tap the SIM Card button.
3. Remove the SIM Card from the target cell phone. It is usually located underneath the battery.
CellDEK® User Manual
Removing SIM card from cell phone
4. Slide the SIM card into the adapter with the gold contacts facing out.
5. Place the adapter in the SIM card reader, which is located on the right hand side of the control panel.
6. As the card is read, the green LED light will behave in one of two ways:
27
CAPTURING DATA a. On older CellDEK units, the LED will constantly stay lit, and blink when the SIM is accessed. b. On newer CellDEK units, the LED stays off, then blinks when the
SIM is accessed.
Inserting SIM Card in Slot
|
CellDEK® User Manual
SIM Card in Slot
SIM PIN and PUK Codes
CellDEK enables an investigator to unlock SIM cards via the PIN code and the PUK code, if they are known.
When CellDEK is used to unlock a SIM card via the PIN code it does not relock the card afterwards.
When unlocking the SIM card via the PUK code CellDEK will reset the PIN number to “0000”. To enable the feature to enter the PUK code, the PIN code needs to be entered incorrectly several times. The PIN-input screen displays the number of attempts remaining before the
PUK code is required.
Dual SIM Extracted Data
Dual SIM handsets can contain two SIM cards; however the handsets are fully operational with only one SIM.
Dual SIM handsets will have the following data:
2 IMEI Numbers
Up to 2 IMSI Numbers
28
CellDEK® User Manual
Up to two lots of SIM Contacts
Up to two lots of SIM Messages
CAPTURING DATA
These handsets make use of two SIM card slots and are referred to as Slot 1 and Slot 2. Either slot can be used if only one SIM card is present.
There are a number of ways the user can switch between SIM cards including a software menu option or a hardware button.
The handsets also have the functionality to set which
SIM card is initially used on start-up irrespective of the
Slot it is in. Therefore the SIM card in Slot 2 can be set to be used before that in Slot 1.
The SIM cards will be referred to as Primary SIM and
Secondary SIM, where the Primary SIM is the one set to be used first.
The following data has been tested and can be extracted from these handsets:
IMEI – Each Dual SIM handset has two IMEI numbers, one for each SIM card Slot. The IMEI numbers are associated to the SIM card slots on the handset NOT the
SIM Cards. CellDEK will only extract the IMEI number of
Slot 1 regardless of how many SIM cards are present or which card is set as the Primary SIM.
IMSI – Each Dual SIM handset can have up to two IMSI numbers, one for each SIM card inserted. CellDEK will only extract the IMSI of the Primary SIM card, regardless of which slot it is inserted into.
SIM Contacts – Dual SIM handsets can store contacts to either SIM card. CellDEK can retrieve contacts from both SIM cards and identify which card they were stored on. Contacts stored on the Primary SIM will be labelled
“[Primary SIM]”. Contacts stored on the Secondary SIM will be labelled “[Secondary SIM]”.
SMS Messages – Dual SIM handsets can store SMS messages on either SIM card. CellDEK will only extract messages stored on the Primary SIM card, regardless of which slot it is inserted into. CellDEK will extract all handset SMS messages but cannot determine which
SIM card they were sent to/from, this can be determined by viewing the SMS on the handset.
Call Logs – Dual SIM handsets store all call logs on the handset and can be dialled or received from either SIM card. CellDEK will extract all call log entries but cannot determine which SIM card was used to dial or receive the call, this can be determined by viewing the call logs on the handset. A ny LDN’s stored on the SIM cards will
29
CAPTURING DATA not be extracted, a separate SIM card extraction will obtain this data.
NIC Card Functionality – Where NIC card support is verified, a NIC card will need to be created for each SIM card used in a Dual SIM handset. The NIC card will need to be returned to the same Slot from which the SIM card taken from. Placing a NIC card in the wrong slot will result in a loss of data.
NOTE: A separate extraction should always be performed on all SIM cards.
Attaching a Memory Flash Card
The Memory Card Reader is also located on the right hand side of the control panel. The CellDEK software application does not allow data to be written to the Memory Card Reader slots.
IMPORTANT NOTE: CellDEK can only support Memory Cards up to
2GB in size and will not work with SDHC cards. Users may attach a card reader that can read larger flash media such as SDHC to the USB port on the CellDEK.
1. Begin by tapping the Read New Device button on the Main
Application Screen. The Device Type Selection screen will appear.
Device Type Selection
2. Tap the Flash Memory button. The next screen will prompt the user to choose the correct memory card.
CellDEK® User Manual 30
CAPTURING DATA
Memory Card Selection Screen
3. Once the correct Memory Card image is selected, the next screen will prompt the user to insert the card in the indicated slot.
Orientation Guide
4. Place the card into the correct slot of the reader as indicated by the on screen graphics.
CellDEK® User Manual
CF Memory Card in Slot
NOTE: If the suspect Memory Card is not represented on the Selection
Screen, a card adapter may be required. (e.g. Transflash, Mini SD,
Memory Stick Duo, etc.)
31
CAPTURING DATA
Imaging Flash Media
After capturing data, CellDEK will ask the user if it should perform a complete image capture of the flash memory card. If the user chooses to do this, CellDEK will run the following procedure:
1. CellDEK will make a sector-by-sector copy of the entire flash media drive.
2. The copy will be stored as an image file in the
“_resource” folder of the extraction directory.
3. CellDEK will then scan the image file for the following types of JPEG files:
Extant JPEG: Normal, readable JPEG files.
Deleted JPEG
Embedded JPEG: JPEG files embedded in emails or other files.
4. Any found JPEG files will be displayed by
CellDEK in the Extended Data screen.
5. The image file can be copied to a thumb drive and investigated further with hex-editing or forensic software.
NOTE: CellDEK cannot distinguish between Extant, deleted or embedded JPEG files. The image file should be further investigated to determine the status of any found files, and whether similar files exist in other formats.
Attaching a GPS Device
1. Begin by tapping the Read New Device button on the Main
Application Screen. The Device Type Selection screen will appear.
CellDEK® User Manual
Device Type Selection
32
CAPTURING DATA
2. Tap the GPS Device button. The next screen prompts the user to choose the type of GPS.
CellDEK® User Manual
Select GPS Type
If a TomTom GO 720 is to be selected, choose “TomTom GO 720”. After capture, you will get an opportunity to capture the memory card separately.
If present, remove the memory card from the GPS device. This will be captured later.
WARNING: ALWAYS remove the Memory Card from a TomTom device prior to capture.
NOTE: TomTom can store the same information in the device and on the
Memory Card. For that reason, the device and card may contain different sets of the same type of data (i.e. application info, favorite destinations, etc.)
Connect Cable 9 to the GPS Device and follow the prompts to extract data. The following information can be extracted from the supported
TomTom Devices:
Device information
Manufacturer, Model, Serial Number
Owner information
Owner’s Name, Owner’s Street, Owner’s Town, Owner’s City
GPS location information
‘Home’ address with GPS coordinate, ‘Favorite’ addresses with GPS coordinates, ‘Destination’ addresses with GPS coordinates, ‘Recent’ addresses with GPS coordinate, ‘Miscellaneous’ addresses with GPS coordinates
Telecommunication information *
Telephone contact information stored on TomTom, Telephone numbers called via the TomTom, Telephone numbers of calls received via the
TomTom, SMS messages received via the TomTom, SMS messages sent via the TomTom
Files *
MP3 files, JPEG files
33
CellDEK® User Manual
CAPTURING DATA
*Only on supported devices.
The following information can be extracted from Garmin devices: manufacturer, model, serial number, “favorite” addresses with GPS coordinates.
3. After the GPS Device is extracted, press “Memory Card” on the screen that appears. Follow the directions for Connecting a Memory
Flash Card earlier in this chapter.
4. The following information can be extracted from HP satellite navigation devices
GPS location information
‘Favorite’ addresses with GPS coordinates,
Route ‘Waypoint’ addresses with GPS coordinates.
‘Search History’ addresses with GPS coordinates.
Telecommunication information
Contact information.
Call Registers.
Files
User files can also be retrieved from the device by performing a separate
Flash Media extraction.
Generic GPS Extraction
CellDEK can now search certain devices for GPS data generated by any of the following GPS Software:
CoPilot 6
Garmin
Navman Smart ST
NavNGo
NDrive
TomTom
The data files generated by this software can be stored on devices without any GPS software installed. This data can still be extracted using CellDEK.
Devices which GPS Data can be extracted from are:
1. Sat-Nav GPS Devices
2. Windows Mobile Devices
3. Flash Media Cards
4. Mass Storage Devices
NOTE: GPS Devices can be used to store data generated from other devices. Therefore, care must be taken when linking data to a specific device.
The following GPS Data can be extracted:
1. ‘Favourite Locations’ - These are a list of addresses and/or coordinates which a user has
34
CellDEK® User Manual
CAPTURING DATA chosen to store on the device. They can contain
Home and Work locations.
2. ‘Recent Destinations’ – These are a list of previous destinations the owner has selected to navigate to.
3. ‘Route Waypoint Data’ – These are a list of addresses and/or coordinates which form set locations along a route that the user has created.
4. ‘History’ - This is a list of addresses and/or coordinates that the owner has previously searched for or viewed. This list may also contain Favourite and Route Waypoint
Locations. This list differs from Recent
Destinations in that the owner may not have selected to navigate to the location.
NOTE: The presence of any of the above data on a device does not indicate that the owner has been to that location. Only that the owner chose to view and/or save that location on the device.
CellDEK will also extract Telecommunications data from some Sat-Nav GPS Devices.
The following Telecommunications data can be extracted:
Contact information
Telephone numbers called via the GPS Device
Telephone numbers of calls received via the
GPS Device
SMS sent and received via the GPS device
This information is extracted from the data files created by the above software only. Mobile communication devices may have a separate store for this information.
NOTE: It is recommended that a separate PDA extraction be performed on all WinMobile devices to obtain Telecommunication Data
GPS Track Logs
CellDEK can extract GPS track logs from devices manufactured by:
Garmin
Navman
HP
Track logs record the GPS coordinates of the device every 1-2 seconds giving an accurate description of where the device has been and when.
35
CAPTURING DATA
The CellDEK report shows only the start point of each stored track log, as each track can potentially store thousands of points.
Track log data is best viewed by importing the
GPSData.gpx into Google Earth.
NOTE: Some devices start logging as soon as they are turned on, however other devices require the user to initiate logging to record track log data.
Opening GPSData.gpx Output Files in Google Earth
CellDEK generates an additional data file when extracting GPS Data. This file contains GPS data and can be imported into Google Earth to display the data.
The data file GPSData.gpx is created within the extraction folder automatically when a GPS extraction is performed.
The data file stores all waypoints, routes and track log data in a format which can be used by Google Earth to display all of the GPS data in the report.
NOTE: Google Earth 5.0 will need to be installed on a
PC to view the GPSData.gpx file. This can be downloaded from: http://earth.google.com
Open Google Earth and tap the File menu.
Then select Open.
CellDEK® User Manual 36
CAPTURING DATA
Navigate to the location where the extracted data files are stored.
In the Files of type drop down box select Gps (*.gpx *.loc
*.mps) and then select the GPSData file and tap open.
Alternatively you can drag the GPSData.gpx file into
Google Earth
The GPS Data Import window appears allowing you to choose what types of data you want to import.
CellDEK® User Manual 37
CAPTURING DATA
To display all GPS fixes along a saved track log make sure you check the Create clickable image for track and route points.
The data is then displayed on the map and can be selected using the Places navigation panel.
CellDEK® User Manual 38
CAPTURING DATA
A full Google Earth User Guide can be viewed at: http://earth.google.com/intl/en/userguide/v5/
NOTE: Google Earth imports GPS coordinates, Time and Date, Altitude and waypoint name data only. Any other information displayed in Google Earth has been inferred by the Google Earth software.
Geo-Tag Data from Images
CellDEK will now display Geo-Tag data for images that have been captured using a device with a GPS receiver.
A Geo-Tag consists of latitude and longitude coordinates and adds geographical identification to an image.
Geo-Tag information is automatically extracted and appears in the metadata section associated with an image.
CellDEK® User Manual 39
Geo-Tag
CAPTURING DATA
NOTE: Geo-Tagging is only displayed if the image has been captured using a device that supports geo-tagging.
Attaching an Apple Device
CellDEK software ver. 1.12.0.0. and newer is able to capture data from
Apple devices such as the iPhone and iPod Touch.
Begin by tapping the “Read New Device” button on the Main Application
Screen. The Device Type Selection screen will appear.
Device Type Selection
Tap the Cell Phone button then select Apple from the list of handset manufacturers.
CellDEK will illuminate the correct data cable with a green light. A prompt will appear on the screen asking the user to attach the cable to the
Phone Cable Jack.
NOTE: DO NOT attach the Apple device until prompted by CellDEK.
Remove the cable from the rack and insert it into the Phone Cable Jack.
The cable’s LED will turn red. Tap OK on the screen.
The cable’s LED will turn green and a new prompt will appear. Attach the target cell phone at this time. Tap the OK button once the phone is connected.
Connection Options
Once the correct target device has been chosen, the next screen will show the different connection options that are available. The three different methods of connection are Cable, Infrared or Bluetooth.
The Connectivity Option screen also shows the type of data that can be extracted from the target device. This information is shown as a series of icons that are
CellDEK® User Manual 40
CAPTURING DATA listed at the end of this chapter. Any data types that cannot be extracted have a red “X” through the icon.
The Connectivity option Screen will also alert the user if the target device supports memory cards.
NOTE: The Connectivity Option screen will show items that can be downloaded from the SIM card if the chosen handset is a GSM phone.
Connectivity Option Screen
Helper Icons
The Connectivity Option Screen also has three “Helper Icons” that indicate the location of the handset’s On/Off switch, Cable Port and IR
Port (if available).
Cable Connection
1. Select “Cable” from the Connectivity Option Screen. CellDEK will access the Cable Adapters that are stored in the case lid.
2. Tap the “Run Extraction” button.
3. CellDEK will illuminate the correct data cable with a green light. A prompt will appear on the screen asking the user to attach the cable to the Phone Cable Jack.
NOTE: DO NOT attach the cell phone until prompted by CellDEK.
CellDEK® User Manual 41
CAPTURING DATA
4. Remove the cable from the rack and insert it into the Phone Cable
Jack. The cable’s LED will turn red. Tap “OK” on the screen.
5. The cable’s LED will turn green and a new prompt will appear. Attach the target cell phone at this time. Tap the “OK” button once the phone is connected.
Data Cable Connected to Device
On completion of data extraction, the data cable must be replaced into any of the forty storage sockets. It does not matter which socket the cable is attached to.
Infrared (IR) Connection (Cell Phones and PDAs)
CellDEK® User Manual
PDA Connected via Infrared
Some Cell Phones have a built-in infrared (IR) port, which can be used to transfer data from the target device.
1. Select Infrared from the Connectivity Option Screen and tap the
“Run Extraction” button.
42
CAPTURING DATA
2. A prompt will appear on the screen asking the user to set the target device to infrared. If the device is a recognized cell phone,
CellDEK will display instructions to set it to infrared mode.
Instructions for Infrared Mode
3. Once the device is in infrared mode, place it next to the Infrared emitter on the control panel. Make sure that the device’s IR port is facing the emitter.
4. After 5 – 20 seconds, the CellDEK will emit a tone to indicate that the IR connection has been made.
Bluetooth Connection
Most Cell Phones have Bluetooth capability, which can be used to transfer data from the target device. CellDEK has a range of 60 feet for
Bluetooth connectivity.
Bluetooth extraction is a wireless communication link. On initiation,
CellDEK will produce a list of all Bluetooth enabled devices. Caution is therefore required when selecting the correct device name list, particularly if two devices in the area have the same name. Any connection will require confirmation/acceptance on the handset in question before the extraction process can commence. This prevents accidental connection to other devices.
Bluetooth capability can only extract data once the handset has been
'paired' with the CellDEK unit. Pairing is when you enter a 4-digit code into the phone/handset to accept the connection. If the 4-digit code is incorrectly entered you cannot access any data from the device. Data can only be extracted covertly over Bluetooth if the device is PAIRED
FIRST, before returning it to the target owner. The data could then be extracted remotely without the target owner’s knowledge (depending on phone type).
Connecting to a Cell Phone via Bluetooth
1. Set the target device to Bluetooth mode. If the device is a recognized cell phone, CellDEK will display instructions to set it to Bluetooth mode.
CellDEK® User Manual 43
CAPTURING DATA
2. Select “Bluetooth” from the Connectivity Option
Screen and tap the “Run Extraction” button. A prompt will appear asking the User to “Tap Discover
Devices to Begin”.
Discover Device List Screen
3. Once the target device has Bluetooth enabled, tap the “Discover Devices” button.
4. A Bluetooth Activity screen will appear as CellDEK searches for Bluetooth devices.
5. After 20-30 seconds, CellDEK will display a list of found devices. Select the name of the target device and tap the Select button.
NOTE: If the target device does not appear in the list, tap the “Discover Devices” button again. It may take more than one attempt to access the device.
6. Once connected, the Target device will prompt the user to allow connection. When requested, enter the
4-digit code as 1234 on the target device. Once the pairing process is complete, data extraction will commence automatically.
NOTE: The target device screen must be monitored during this stage of the process. Some target devices require confirmation at various stages to continue extracting.
After data extraction, a reminder will appear for the user to remove the CellDEK from the Device’s Bluetooth
History list.
Custom Extraction
Pressing the “Custom Extraction” instead of the “Run Extraction” button allows the user to decide what data is downloaded from a handset. This is handy when the user only needs the call log from a handset, for example.
CellDEK® User Manual 44
CAPTURING DATA
Custom Extraction Screen
Tap the radio buttons to download or skip different data types. Press OK when finished.
Any data not read will appear in the capture report as “User chose not to extract ___________”.
NOTE: “Extract Files” refers to all image, movie, sound and other files found in the Extended Data portion of a capture.
SIM Cards and Flash Memory Card Connection
SIM Cards and Flash Memory Cards require no special Connection procedures. Once the card is connected, data will begin to extract as outlined in Chapter 3 – Capturing Data.
CellDEK® User Manual 45
CAPTURING DATA
Main Connectivity Icons
The Connectivity Option Screen uses distinct icons to show what data can be pulled from supported phones with different connection options.
ICON DESCRIPTION ICON DESCRIPTION
IMEI Number
Time
Sent SMS Message
Saved SMS Message
Date Calendar Entries
Contact List (ADN)
Dialed Calls
Tasks
Audio Files
Received Calls
Missed Calls
Read SMS Message
Unread SMS Message
Multimedia Message – SMS messages that can include attachments.
Image Files
Video Files
Other Files
NOTE: Presence of this symbol next to the icon denotes that the data is extracted with relevant timestamps.
Other Files
Connectivity Icon Table
Other connectivity Icons
The Connectivity Option Screen also tells whether a handset supports extraction through a NIC card or if the handset can be accessed without its SIM card.
CellDEK® User Manual 46
CAPTURING DATA
Network Isolation (NIC) Cards and SIM Card ID Cloning
CellDEK has the ability to isolate many handsets from the mobile network by using a
Network Isolation Card (NIC). NIC cards are placed in the SIM card slot of the handset.
There are three categories of support for this feature.
Handsets that support this feature are displayed with a blue NIC icon.
Handsets that do not support this feature are displayed with a blue NIC icon crossed with a red line.
Handsets that are untested for this feature are displayed with no NIC icon.
Phone Model Selection Screen
Connectivity Option Screen
A NIC card is included with each CellDEK. Additional Network Isolation Cards can be purchased from your CellDEK supplier.
Any CellDEK unit running software ver. 1.7.0.0 or later is able to support Network
Isolation Cards (NIC). These cards replace the handsets SIM card and isolate the handset from its network while allowing a normal examination to take place.
CellDEK ver. 1.20.0 and higher include the following features:
CellDEK® User Manual 47
CAPTURING DATA
Create from Existing SIM
Manually enter NIC data
Create Test NIC
An explanation and summary for each method is included in the step-by-step instructions below.
SIM Card ID Cloning Step-by-step
To perform SIM Card ID cloning, tap Read New Device from the main menu. The device type selection screen will appear.
Tap Create NIC. The NIC Operation screen will appear.
CellDEK® User Manual
Create from Existing SIM
CellDEK will clone the original SIM card ID. It will copy the ICCID and IMSI from original SIM card onto a NIC
(SIM ID Card). The ICCID and IMSI on NIC must be identical to original SIM. NIC (SIM ID Card) ICCID and
IMSI values can be checked by performing a SIM Card
Extraction of NIC.
This method is useful when the original SIM card is available.
1. From the NIC Operation screen, tap Create
from Existing SIM.
2. Place the SIM card into the SIM card adapter then insert the adapter into the reader. Tap OK.
48
CAPTURING DATA
3. CellDEK will read the inserted SIM card. After this process, the following screen will appear:
4. Remove the SIM card from the adapter and place the NIC (SIM ID Card) into the same adapter. Insert the adapter into the reader then tap OK. CellDEK will now create the NIC (SIMID
Card). When this process finishes, the screen below will appear. Tap OK.
CellDEK® User Manual
5. CellDEK will prompt whether a phone is compatible with Network Isolation Cards.
Selecting No will finish the process and bring the user back to the CellDEK main screen. Selecting
YES to the screen below will prompt the user to identify the phone to be used with the NIC (SIM
ID Card). After selecting the phone, one of the following two screens will appear. Tap OK to finish he process and go back to the CellDEK main screen.
49
CAPTURING DATA
CellDEK® User Manual
Manually enter NIC data
CellDEK will create a NIC (SIM ID Card) by writing valid
ICCID and IMSI values entered by the user.
This method is useful when the original SIM card is not available. To find out the correct ICCID or IMSI numbers, please contact the handset’s network provider.
Valid ICCID numbers are 19 or 20 digits long and include the following:
The first 2 digits represent the Major industry identifier (89 for telecommunications)
1-3 digit Country Code
1-4 digit Issuer ID
Variable length individual Account ID
Valid IMSI numbers are 15 digits long and include the following:
The first 3 digits represent the Mobile Country
Code (MCC).
The next 2 or 3 digits represent the Mobile
Network Code (MNC).
The next digits represent the mobile station identification number. Normally there will be 10 digits but would be fewer in the case of a 3-digit
MNC or if national regulations indicate that the total length of the IMSI should be less than 15 digits.
NIC (SIM ID Card) ICCID and IMSI values can be checked by performing a SIM Card Extraction of NIC.
50
CAPTURING DATA
1. From the NIC Operation screen, tap Manually
enter NIC data.
Use the virtual keyboard (or an attached USB keyboard) and enter the ICCID and IMSI values.
When finished, tap OK.
2. Place the NIC (SIM ID Card) into the adapter and insert the adapter into the reader. Tap OK.
3. CellDEK will now create the NIC (SIM ID Card).
When this process finishes, the screen below will appear. Tap OK.
CellDEK® User Manual
4. CellDEK will prompt whether a phone is compatible with Network Isolation Cards.
Selecting No will finish the process and bring the user back to the CellDEK main screen. Selecting
YES to the screen below will prompt the user to identify the phone to be used with the NIC (SIM
51
CAPTURING DATA
ID Card). After selecting the phone, one of the following three screens will appear.
5. Tap OK to finish he process and go back to the
CellDEK main screen.
CellDEK® User Manual
Create a test NIC
CellDEK will attempt to write default ICCID and IMSI onto a NIC (SIM ID Card). The default values are:
ICCID = 894900050701001429
IMSI = 001010123456789
A warning will appear after creating a test NIC:
“A Test NIC can be used to access handset data but should only be used as a last resort. Inserting into a handset may cause data to be lost or changed ”
NIC ICCID and IMSI values can be checked by performing a SIM Card Extraction of NIC.
This method should be used as a last resort if none of the previous methods work. It is important to understand
52
CAPTURING DATA that incorrect ICCID or IMSI data may cause data on the handset to be lost or changed.
1. From the NIC Operation screen, tap Create
Test NIC.
2. Place the NIC into the adapter and insert the adapter into the reader. Tap OK
3. CellDEK will now create the NIC (SIM ID Card).
When this process finishes, the screen below will appear. Tap OK to finish the process.
Extraction without a SIM Card
CellDEK can extract data from many handsets with the SIM card removed. If a handset’s
SIM is PIN locked this feature allows an extraction of the handset with the SIM removed.
If supported, this feature is displayed in the Connectivity Screen.
CellDEK® User Manual
Connectivity Option Screen
53
CAPTURING DATA
Capturing Nokia Handsets
Certain Nokia Handsets require special adapters in order to extract data. This section deals with two major topics: Installing the CA-42 Cable and using Nokia Flash adapters to connect to a handset.
Nokia CA-42 Cable Installation
The Nokia CA-42 Cable that is provided with CellDEK is different than the other cables. It resides in the storage compartment and not in the connector rack. As such it needs to be installed on the CellDEK prior to use. To install the cable:
1. Boot the CellDEK to the Main Application Screen.
2. Attach the CA-42 Cable to the USB port. Wait for the USB connection tone. (It may take over a minute for the tone to be heard).
3. Remove the cable. It is now ready to be used for extractions!
Nokia Flash Adapters
The CellDEK is able to connect to certain Nokia handsets through the use of specialized adapters from Nokia. Refer to chapter 7 for a list of
Nokia handsets that are supported and the corresponding adapters.
Attaching Nokia Flash Adapters
Follow these steps to attach a flash adapter to a Nokia handset:
NOTE: This demonstration uses a Nokia 1100, but the procedure is similar for other models.
CellDEK® User Manual 54
Nokia 1100 Handset
CAPTURING DATA
1. Power the handset off.
2. Remove the back cover and the battery. Leave the
SIM card in place.
Handset Battery Removed
NOTE: The time and date on the handset may be changed when the battery is removed.
3. Locate the data pins in the battery compartment of the handset. You may need to remove a small, black plastic cover.
Data Pins
4. Place the appropriate adapter inside the handset so that the adapter’s data pins touch the pins of the handset.
CellDEK® User Manual 55
Adapter Data Pins (circled)
CAPTURING DATA
5. Insert the lower part of the adapter first, then snap the upper part of the adapter into place.
Adapter in Handset
6. Insert the handset’s battery into the adapter by aligning the battery pins. Push the battery in and down until it snaps into place.
Battery Pins on Adapter and Battery (circled)
7. When properly assembled, the handset should look like the picture below:
CellDEK® User Manual 56
Installed Flash Adapter
CAPTURING DATA
8. Power the handset on, and perform the data extraction with Cable 25 as outlined in the “Cable
Connection” section earlier in this chapter.
Connected to Cable 25
CellDEK® User Manual 57
3. Capturing Data
Case Details
Once the target device has been successfully connected, the Case Details input form appears:
Case Details Input Form
1. If the report will be filled out later, tap the Later button to continue on to data extraction.
2. If the report is to be filled out now, tap the first line that needs to be filled out.
3. The CellDEK keyboard will automatically open. The keyboard allows the use of upper/lower case letters, numerals and other characters, however not all characters have been validated. The CellDEK will display one of two types of keyboards.
NOTE: The keyboard is also accessible from any screen that displays the button to the left.
CellDEK® User Manual 58
CAPTURING DATA
Alphanumeric Keyboard
Alphanumeric Keyboard
NOTE: Alternatively, a USB Keyboard can be attached to the CellDEK through the USB port.
4. Enter the information and tap the Enter key when finished.
5. Repeat steps 2 – 4 for each line that needs to be filled out.
6. Tap the OK button once all of the information is filled out. The fields entered will be built into the final report, which is generated on completion of the extraction.
Other Notes
Certain fields will show users a list of previous entries. These entries can be dropped into the field without retyping them. The Case Details form will remember the last 20 entries for the following fields:
Case Reference Number
CellDEK Operator
Investigating Officer
Exhibit ID
Service Provider
The Case Details Form can be opened and edited for previous extractions.
Data Extraction
Searching for Drivers
Sometimes, CellDEK may need to load new drivers for a handset that has never been attached before. A progress bar will appear briefly that
CellDEK® User Manual 59
CAPTURING DATA indicates drivers are being loaded. The capture session will continue once the drivers are loaded.
Note: Allow sufficient time for the driver to load.
Standard Data Extraction
Once a target device has been identified and connected, the CellDEK software will prompt the user to continue. Doing so starts the extraction pr ocess for “standard data”.
Standard data includes such information as Contacts, Call Logs, SMS
Text Messages and Organizer data.
As the data is being extracted, CellDEK will show the progress in the
Activity Log on the screen:
Activity Log
Abort Capture
The capture process can always be aborted by tapping the Abort button during the capture operation. This button is located underneath the
Activity Log. If the button is pressed a prompt will appear:
CellDEK® User Manual
Abort Capture Prompt
60
CAPTURING DATA
This prompt will allow the user to skip the current capture operation (i.e. downloading contacts) or abandon the whole capture session. Pressing the Abandon button will go back to the Main Application Screen.
Extended Data Extraction
“Extended Data” refers to such items as Image files, Video files, Audio files and any other files such as themes, screensavers, etc.
When the standard data has been extracted, the user is given the option to select and download other files from the target device.
CellDEK® User Manual
Data Download Selection Screen
1. Tap the Images Button at the bottom of the screen, CellDEK will display all supported Image files that were found in the target device ’s memory.
2. Select an Image file for download by tapping once on it. Tap a second time to deselect the file. Scroll through the list and tap any other files that are desired.
3. Repeat Steps 1 – 2 for the “Video”, “Audio” and “Other” buttons.
4. NOTE: Select all files of a particular type by tapping the “Select all <.ext> files” bar.
5. As files are selected, CellDEK shows the number and size of total files at the top of the screen.
6. Once all needed files have been selected, tap the Download button. The Download Manager will show progress as the files are downloaded to CellDEK.
Download Manager
61
CAPTURING DATA
7. At any time, press the Change Selection button to stop downloading and re-select the files to download.
8. As the files download, the Activity Log will indicate downloaded files in green, selected files not downloaded in gray and unselected files in white.
Activity Log During Download
On completion of the download, a summary of all files, including listings for files not selected for download, will be displayed. The data received from the target device is written into an .XML and a .CSV file, then stored in the case unique folder.
NOTE: The csv data file only contains data for Device Info, Call Logs,
Contacts, and Messages.
Support for Non-Latin Languages
All handsets supported by CellDEK have had full validation of each feature carried out for the full range of Latin character sets (ASCII programming language).
CellDEK has also been further developed to extract information from
Unicode languages that provide non-Latin character sets such as Greek and Arabic characters.
These extractions have not been verified although tests indicate the following:
SIM cards (supported natively)
Windows (supported natively)
Nokia (supported natively)
Sony Ericsson (full support, Unicode development implemented: an option has been implemented to allow the user to extract in
ASCII if required)
Samsung (partial validated Unicode support - for messages only)
Motorola (partial support, Unicode development implemented: an option has been implemented to allow the user to extract in
ASCII if required)
CellDEK® User Manual 62
CAPTURING DATA
Siemens (partial i.e. validated Unicode support for handsets contacts and notes)
If CellDEK does not extract a character; it will appear as a square on the screen.
Special Note for Motorola and Sony Ericsson
The extraction of Unicode characters for all data sets has not been verified for Motorola and Sony Ericsson devices.
Before an extraction begins with one of these devices the CellDEK will offer the user a choice:
1. Extract validated data set only. This means that some Unicode data will not be extracted.
2. Attempt to extract all Unicode data. Software will try to extract
Unicode characters for all data sets on the device. At this time the output in this case is not guaranteed by validation testing.
Other Data Extraction Notes
This section contains extraction information and notes regarding specific handsets, phone Operating Systems, or devices.
SQLite Viewer
CellDEK now includes an SQLite Viewer which allows SQLite databases to be explored – SQLite databases can be found in Apple, Android OS devices,
BlackBerry and Symbian OS Series 60 smartphones. Apps such as Apple
Safari and Opera store data in SQLite databases.
An SQLite database looks like the following screen when viewing extracted data.
CellDEK® User Manual 63
CAPTURING DATA
Tap the link in the extracted data entry (in this example, tap “view file content as HEX/ASCII”. The following screen will appear:
Tap the SQLite Viewer button to open the SQLite Viewer.
CellDEK® User Manual 64
CAPTURING DATA
Android Devices
CellDEK has the capacity to extract information from mobile devices that use Google’s Android operating system. Extracted data includes:
Contact details, Call Logs, SMS messages, Calendar/Tasks and Files.
CellDEK supports extraction of contacts database on handsets running on Android 2.2 operating system.
Before an extraction can be performed, users must:
1. Tick “Unknown Sources” and “USB debugging” in the target devices application settings.
2. Ensure the target device has a formatted SD Card inserted.
The Android extraction process requires the use of an application
(Agent) which is automatically installed onto the target device and executed. The Agent extracts data from the device and stores in a temporary file called ANDDAT on the devices SD Card.
(\sdcard\ANDDAT). At the end of the extraction, the ANDDAT file is deleted from the card and the Agent is automatically uninstalled.
Supports physical extraction and decoding of Android phones
Supports Android O/S 1.6 through 2.3.4
Supports Android file systems EXT3, EXT4 and RFS, and provides limited support for YAFFS2. YAFFS2 is expected to be fully supported in a future release
Supports dumping and decoding of contacts, call logs, SMS, emails and user files
Can extract deleted file items such as databases, images, video, audio and documents
It is expected that most Android phones using the above mentioned
Android O/S and/or file systems will be supported.
Samsung Galaxy S3
The following Samsung Galaxy S3 devices can be rooted.
To root a Samsung Galaxy S3, you must select Android
Generic from the Android model list, and use an original
Samsung USB data cable. Connect the cable into the USB port located on the top of the unit CellDEK. Using the
CellDEK adapter 26 will NOT work.
NOTE: Rooting Samsung Galaxy S3 requires permanently flashing a new insecure bootloader image onto the device.
The device will remain permanently rooted.
NOTE: 100% successful rooting is not guaranteed. In rare instances rooting can render the handset inoperable. Proceed with caution.
CellDEK® User Manual 65
CellDEK® User Manual
CAPTURING DATA
SAMSUNG I9300 4.0.4 build IMM76D
SAMSUNG I9300 4.0.4 build IMM76D
SAMSUNG I9300 4.0.4 build IMM76D
SAMSUNG I9300 4.1.1 build JRO03C
SAMSUNG I9300 4.1.1 build JRO03C
SAMSUNG I9300 4.1.2 build JZO54K
SAMSUNG I9300T 4.1.2
SAMSUNG I9305 4.1.1 build JRO03C
SAMSUNG I9305 4.1.1 build JRO03C
SAMSUNG I9305 4.1.1 build JRO03C
SAMSUNG I9305 4.1.1 build JRO03C
SAMSUNG I9305 4.1.2 build JZO54K
SAMSUNG I9305 4.1.2 build JZO54K
SAMSUNG I9305N 4.1.1 build JRO03C
SAMSUNG I9305N 4.1.2
SAMSUNG I9305T 4.1.2
SAMSUNG SPH-L710 4.0.4 build IMM76D
SAMSUNG SPH-L710 4.1.1 build JRO03C
SAMSUNG SPH-L710 4.1.2
SAMSUNG SGH-I747 4.0.4 build IMM76D
SAMSUNG SGH-I747 4.1.1 build JRO03C
SAMSUNG SGH-I747 4.1.1 build JRO03L
SAMSUNG SGH-I747M 4.0.4 build IMM76D
SAMSUNG SGH-I747M 4.0.4 build IMM76D
SAMSUNG SGH-I747M 4.1.1 build JRO03C
SAMSUNG SGH-I747M 4.1.2
SAMSUNG SGH-T999 4.0.4 build IMM76D
SAMSUNG SGH-T999 4.1.1 build JRO03C
SAMSUNG SGH-T999 4.1.2
SAMSUNG SGH-T999V 4.0.4 build IMM76D
SAMSUNG SGH-T999V 4.1.1 build JRO03C
SAMSUNG SCH-R530 4.0.4 build IMM76D
SAMSUNG SCH-R530 4.1.1 build JRO03C
SAMSUNG SCH-R530 4.1.2
SAMSUNG SCH-R530M 4.0.4 build IMM76D
SAMSUNG SCH-I535 4.0.4 build IMM76D
SAMSUNG SCH-I535 4.1.2
SAMSUNG SCH-I535 4.1.1 build JRO03C
SAMSUNG SCH-I939 4.1.2
Android Ad-hoc device rooting
CellDEK software version 1.21.x.x and newer can temporarily root Android OS devices. This allows access
66
CAPTURING DATA to all user data stored on the device. Ad-hoc rooting does not work with all Android devices. Rooting is removed after the device is restarted. Please check with local laws governing rooting prior to using.
Compatible with the majority of Android OS devices
Android OS versions 1.6-2.3 are supported
Gives access to the whole file system. After rooting/data/data and/data/misc folders of
Android device internal memory are available for analysis. Without root permissions these folders are inaccessible.
100% successful rooting is not guaranteed
NOTE: 100% successful rooting is not guaranteed. In rare instances rooting can render the handset inoperable. Proceed with caution.
Ad-hoc rooting will provide the following features:
Allows user to access the whole device file system
Deleted data in database tables (deleted contacts, messages, etc.)
Pre-installed and custom applications with user data
Application data mentioned in this section
Ad-hoc device rooting is not required for the data extraction of Call Logs, Phonebook and Messages.
When performing an Android extraction, CellDEK will ask if you want to temporarily “Root” the Android device.
If successful, the device will remain rooted until turned off.
In the Logical Extraction Settings there is a option called “Extract ALL Android Files (device must be
rooted”. When checked, and the Android device is rooted, ALL file locations will be extracted. Please note this may take a long time to complete the extraction.
CellDEK® User Manual 67
CAPTURING DATA
CellDEK® User Manual
If the device is not rooted, only the following file locations will be extracted:
/sdcard/
If the device is rooted and the checkbox for ‘Extract ALL
Android files’ is not checked, only the following file locations will be extracted:
/sdcard/
/data/data/
/data/misc/
Android Email
CellDEK can extract data from the default email and
Gmail databases.
Device must be temporarily rooted
Email attachments not supported
Email body preview only
Android App Data
The Android extraction can extract data from the following apps if the Android device is rooted:
Dolphin Browser
eBuddy Messenger
DropBox application data
Facebook Messenger
Firefox Browser
Google Calendar, Google Hangouts, Google Mail,
Google Maps, and Google Talk application data
Line
Skype
Skyfire Browser
68
CAPTURING DATA
Tumblr
Viber
WhatsApp Messenger
Yahoo! Mail application data
Yahoo Messenger
NOTE: The Android device must be rooted for the above data to be extracted.
eBuddy Messenger, Facebook Messenger,
Google Hangouts, Google Talk, Line, Skype,
Tumblr, Viber, WhatsApp Messenger, and Yahoo
Messenger are categorized as IM Data and can be found in the following report sections: IM Contacts,
IM Calls and IM Chat.
Dolphin Browser, Firefox Browser, and Skyfire
Browser data can be found in the URLs report section.
Google Maps data can be found in the Locations report section.
Android Location Information
The Android extraction can extract Cell and WIFI connection location information which includes GPS coordinates and timestamps. This information is shown in the Location Information section of the report.
CellDEK also generates a Google Earth .KML file called
GPSData.kml which is created in the extracted data files folder. This file can be imported into Google Earth. Note:
The device must be rooted to acquire location information.
Android files of Interest
The Android extraction can extract system files *. Some of these files may contain useful information. These files are described below:
\data\data\com.google.android.location\files\cache.wifi
Contains cached WIFI details.
\data\data\com.android.providers.userdictionary\databases\user_dict.db
Containing cached user entered text
\data\data\com.google.android.gm\databases\gmail.db
\data\data\com.google.android.gm\databases\mailstore.*.db
Contains Google email account and mailstore databases
\data\data\com.google.android.talk\shared_prefs\BuddyList.xml
Contains Google Talk contact details
\data\data\com.android.providers.calendar\databases\calendar.db
Contains Google calendar details
CellDEK® User Manual 69
CAPTURING DATA
\data\data\com.yahoo.mobile.client.android.mail\databases\mail.db
Contains Yahoo email details
NOTE: Device must be rooted to acquire some of these files.
Data Capture from Apple iPhone
Apple iOS 7 is supported with CellDEK software 1.27.x.x. iTunes will automatically be updated during the CellDEK 1.2.7.x.x software installation.
PList Viewer
CellDEK now includes a PList Viewer which allows Apple
Property List binary XML files to be viewed. Plist files may contain a lot of valuable forensic information such as browser history, Wi-Fi access points, speed dials, Bluetooth settings, global applications settings, Apple Store settings etc.
A PList database looks like the following screen when viewing extracted data.
CellDEK® User Manual
Tap the link in the extracted data entry (in this example, tap
“view file content as HEX/ASCII”. The following screen will appear:
70
CAPTURING DATA
Tap the PList Viewer button to open the PList Viewer.
CellDEK® User Manual iPhone Passcode Bypass
CellDEK can extract data from a passcode locked iPhone if specific iTunes .plist files from a PC or Mac are available.
The iPhone’s passcode must have been enabled then synced with the PC or Mac after the passcode was enabled.
The PList files will need to be copied from the PC or Mac to a specific folder/directory on a USB drive.
71
CAPTURING DATA
1. Locate iTunes .plist files from synced PC or Mac. These can be found in the following locations:
Windows 98/ME/2000/XP iTunes Users:
C:\Documents and Settings\All Users\Application Data\Apple\Lockdown\
Windows Vista iTunes Users:
C:\Users\<User Name>\AppData\Roaming\Apple Computer\Lockdown\
Windows 7 iTunes Users:
C:\ProgramData\Apple\Lockdown\
NOTE: Windows file locations are hidden by the
Operating System by default. There are different ways of showing hidden files depending on the Operating
System. Please search the Internet or contact Microsoft support for instructions on how to show hidden files.
Mac OS X iTunes Users:
VolumeName\Users\<User Name>\Library\Lockdown\
Or
/var/db/lockdown
2. Copy all iTunes .plist files to the following directory on a
USB drive (It is recommended that the USB drive is formatted before creating \CellDEK\Lockdown directory and copying .plist files):
:\CellDEK\Lockdown\
3. Insert USB drive into CellDEK and perform a regular iPhone extraction. CellDEK will then search the USB drives for any .plist files and import them if found.
CellDEK® User Manual 72
CAPTURING DATA iPhone App Data
The iPhone extraction can extract data from the following apps:
Apple Maps (iOS 6 and above only)
eBuddy Messenger
FaceTime
Line
Skype
Tumblr
Viber
WhatsApp Messenger
Yahoo Messenger
Apple maps report will contain GPS coordinates and Google
Maps hyperlinks (added to the “Locations” section of the report). Data is exported in KML format, which can be opened using Google Earth, Google Maps, and Google
Maps for mobile. eBuddy Messenger, Line, Skype, Tumblr, Viber, and
WhatsApp Messenger, and Yahoo Messenger data are categorized as IM Data and can be found in the following report sections: IM Contacts, IM Calls and IM Chat.
FaceTime data can be found in the Calls report section. iPhone Dictionary Data
CellDEK software version 1.21.x.x and newer reports a list of keywords extracted from the following iPhone file:
dynamic-text.dat. These keywords are shown in the report under the dictionary heading.
Apple Location Information
The file GPSData.kml is created when extracting an iPhone. This file can be opened using Google Earth. iPhone files of Interest
During the iPhone extraction process a number of ‘other’ files can be extracted. Some of these files may contain useful information.
A selection of these files is shown below.
Note: The content of these files has not been verified.
\private\var\mobile\Library\Cookies\Cookies.plist
Contains website cookies saved by the Safari browser.
\private\var\mobile\Library\Safari\Bookmarks.db
Contains website bookmarks saved by the Safari browser.
CellDEK® User Manual 73
CAPTURING DATA
\private\var\mobile\Library\Safari\History.plist
Contains website history saved by the Safari browser.
\private\var\mobile\Library\Mail\Accounts.plist
Contains email server account details, this does not include actual emails.
\private\var\mobile\Library\maps\History.plist
Contains a ‘Google Maps’ history file which includes addresses, route directions and other useful data.
\private\var\mobile\Library\Keyboard\dynamic-text.dat
A keyboard cache containing user entered text.
\private\var\mobile\library\Preferences\com.apple.Maps.plist
Contains the last longitude/latitude coordinates viewed in the ‘Google maps’ application.
\private\var\mobile\library\Preferences\com.apple.mobilesafari.plist
Contains a list of recent searches performed using the Safari browser
\private\var\root\library\caches\locationd\consolidated.db
Contains a list of web connections and location services
\private\var\mobile\library\Calendar\Calendar.sqlitedb
\private\var\mobile\library\Preferences\com.apple.mobilecal.plist
Contains Google calendar details
\private\var\mobile\library\WebKit\Databases\Databases.db
\private\var\mobile\Library\WebKit\Databases\http_m.yahoo.com_0\*.db
\private\var\mobile\Library\WebKit\Databases\https_mail.google.com_0\*.db
Contains email database details
\private\var\mobile\Applications\com.yahoo.messenger\Library\Preferences\co m.yahoo.messenger.plist
\private\var\mobile\Applications\com.yahoo.messenger\Documents\*.db
Contains a list of Yahoo Instant Messenger files
Data Capture from Symbian OS
CellDEK now has the capacity to extract information from mobile handsets that use the Symbian operating system (Series 60 / Nokia
Symbian OS V 8.1). Extracted data includes Contact Details, Call Logs,
SMS messages, Calendar, Tasks and Files.
This data capture is possible with the following caveats:
No SIM data is extracted from Symbian handsets.
“Nicknames” are not extracted.
Cannot extract any SMS messages stored in 'My Folders' directory or other user created folders.
To extract data, it is necessary for CellDEK to write temporary .dat files to the target phone. These files are removed at the end of capture.
CellDEK® User Manual 74
CellDEK® User Manual
CAPTURING DATA
Capture from Symbian UIQ 2 nd
& 3 rd
Edition OS
CellDEK now has the capacity to extract information from mobile handsets that use the Symbian UIQ 2 nd
and
3 rd
Edition OS. Extracted data includes Contact Details,
Messages, Calendar, Tasks and Files.
Data capture requires a handset Agent and the use of a
CellDEK UIQ memory card. This is a specially prepared card by CellDEK to temporarily store and transfer data.
WARNING: Do not create the UIQ memory card from the card used inside the handset. Always use a separate blank, formatted card that is not write protected.
Use these memory cards for best results:
Sony Ericsson
P800 / P900 Memory Stick Duo, minimum size 16MB
P910i / P990i Memory Stick PRO Duo, minimum size
64MB
M600i / P1i Memory Stick Micro (M2), minimum size
256MB
Motorola
Z8 / Z10 Micro SD, minimum size 128 MB
Follow these steps to capture data:
User inserts spare memory card into the memory card reader.
1. CellDEK generates and formats a UIQ card and installs the Agent.
2. User then inserts the UIQ card into handset.
3. User locates the Agent installer on the UIQ card using the file browser application and then installs the agent onto the device.
4. User locates and runs the Agent application, then waits for the data extraction to complete.
Extracted data is now stored on the UIQ
card.
5. User removes the UIQ card from the handset and inserts it back into the memory card reader.
6. CellDEK automatically copies and decodes all data from the UIQ card.
7. CellDEK formats the UIQ card.
8. CellDEK instructs the user to uninstall the agent from the handset.
9. CellDEK presents the results to the user.
75
CellDEK® User Manual
CAPTURING DATA
This data capture is possible with the following caveats:
Extraction of Call Logs is not supported.
Extraction of SMS messages stored in user created folders is not supported.
Extraction of MMS / Email messages is not supported.
Memory cards within these phones need to be captured separately. (Please refer to “Capturing a Flash Memory
Card ” earlier in this chapter).
Symbian Event Logs
Symbian S60 2 nd
Edition and 3 rd
Edition handsets have the ability to record events which CellDEK can now extract.
The following information can be extracted:
Voice Call events – ID, Number, Date, Time,
Direction and Duration
SMS events – ID, Number, Date, Time,
Direction, Message Fragment and Status
MMS events – ID, Name, Date, Time, Direction and Duration
These events are normally accessed by the handset’s
Log Viewer application. These events have a validity period set in the Log Viewer settings. Once this duration period has expired, events will no longer be accessible.
Points of Interest
Timestamps extracted by CellDEK are always reported in Greenwich Mean Time (GMT) whereas the timestamps shown in the handset’s
Log Viewer application are set to the handset’s current time zone.
CellDEK is able to extract message fragments for SMS events. These are not displayed by the
Log Viewer application. Only the first 64 characters of a message are reported any messages greater than 64 characters are truncated in the event log, including multipart messages where only the first 64 characters of the first message part are reported.
Incoming MMS messages are shown as 2 separate events, 1 incoming SMS event and 1 outgoing MMS event. CellDEK extracts both of these events. The SMS event has a body fragment of Data Message
76
CAPTURING DATA
The following Symbian S60 handsets are verified on
CellDEK:
NOKIA: 3230, 3250 5320XpressMusic, 5500 Sport,
5700, 6120, 6220 Classic, 6260, 6290, 6620, 6630,
7610, E50, E51, E61, E63, E65, E66, E70, E71, N70,
N71, N72, N73, N76, N77, N79, N80, N81, N82, N85,
N90, N91, N93, N93i, N95, N95 8GB
SAMSUNG: I8510, SGH-D720, SGH-G810
Data Capture from Sony Ericsson Phones
If the User runs into trouble capturing data from a Sony Ericsson phone
(or any other handset that connects to Cable #18), users should make sure that the “Default Contacts” setting on the target handset is set to
“Phone Contact” before an extraction is performed.
This is done by navigating manually on the phone’s menus as follows:
Menu > Contacts > Options > Advanced > Default Contact > Select
“Phone Contact”.
Once this setting is enabled, users should have no trouble extracting data from the handset.
Blackberry PIN Lock
The CellDEK allows the user to input the PIN lock for a Blackberry device directly through the CellDEK interface rather than the device itself. The CellDEK will automatically detect if a PIN lock is enabled and bring up the Enter Password Prompt.
CellDEK® User Manual
Enter Password Prompt
TIP: Tap “Hide Password” to turn it on or off. If Hide Password is on, the password will appear.
77
CAPTURING DATA
Hide Password Turned On
NOTE: The password or the PIN of the Blackberry device will need to be entered. CellDEK cannot unlock the device without it.
Blackberry PIN Numbers
Each Blackberry device is assigned a unique personal identification number (PIN), which allows identification of each device.
The PIN number of other Blackberry users is stored in the devices phonebook with their contact information and allows direct PIN-to-PIN emailing and messaging.
CellDEK extracts each contact PIN number from the phonebook as well as the PIN numbers associated with messages sent from other Blackberry users.
Time/Date Stamps from Motorola Phones
Users should note that Motorola timestamps / date stamps are not reported due to current limitations in how file “modified” and file “created” timestamps are reported in the Motorola OS. This may be remedied in a future software update.
Null Response from Siemens handsets
Occasionally, Siemens handsets have been known to return a NULL response when asked for data of a particular type (i.e. SMS messages).
If this happens, the following error message will appear under the relevant data type:
Handset has been known to occasionally return a null response.
Please refer to handset and retry extraction.
Users should check the affected field(s) on the handset and retry the extraction.
CellDEK® User Manual 78
CAPTURING DATA
SMS Attached Content
SMS Messages can contain extra content other than standard text.
CellDEK now notifies the user when any extra content appears within an
SMS Message.
NOTE: This feature is currently only supported for SMS extracted through handsets supporting AT commands. Reporting of attached content functionality is not supported for Blackberry, Symbian or
Windows Mobile handsets.
Notifications appear within the body part of the message and describe the type of attached content.
Notifications appear in the following form:
[CONTAINS CLIPART REFER TO HANDSET]
SMS Messages may contain more than one type of attached content.
CellDEK will display a notification for each piece of attached content within the message.
VCard and VCalendar Content
VCards and VCalendars are used to exchange information between application.
VCards store address book entries while VCalendars store organiser entries.
VCards and VCalendars can be attached to SMS Messages. CellDEK will now display the raw data of attached VCards and VCalendars within the body of the SMS Message.
VCard and VCalendar data will appear between the tags
[ATTACHEMENT: CONTACT DATA]
Or
[ATTACHMENT: CALENDAR DATA]
And will end with
[END ATTACHMENT]
As SMS Messages have a limited size VCards and VCalendars may span several messages.
In this case each part of the VCard or VCalendar will start with the tag
[ATTACHMENT CONT..]
CellDEK® User Manual 79
CAPTURING DATA
To indicate the content follows from a previous message.
Each message part will also end with the tag below to indicate that more content will follow in the next message:
[…]
NOTE: VCard and VCalendar content is displayed in its raw format.
Where VCards and VCalendars span more than one SMS Message, each part will need to be manually put together to form a valid VCard or
VCalendar entry.
More information on VCards and VCalendars can be found at www.imc.org/pdi/
Various Windows Mobile Devices
The following mobile GPS software has been verified and can be extracted from supported devices using CellDEK:
Google Maps Mobile (Various Windows Mobile devices)
Other Extraction Notes
CellDEK can now playback W4A files that have been extracted from devices.
W4A files are audio files that can be created on some mobile handsets.
CellDEK® User Manual 80
4. Analyzing Captured Data
Displaying Extracted Data
Once the extraction for standard and extended data is complete, the data is displayed onscreen prior to the generation of the CellDEK report. All data is individually hashed using the MD5 algorithm to ensure that the data can be verified as unchanged.
As of CellDEK software 1.25.x.x, the extracted data is viewable in a new on-screen report:
CellDEK® User Manual 81
ANALYZING CAPTURED DATA
The on-screen report can have different icons showing depending on the type of device extracted. Each button will have a number showing how much data was extracted. Here is a list of available icons:
--- Device Information – Shows information about the device including the Manufacturer, Model, IMEI/ESN, SIM Card information (if a SIM card is included), etc.)
--- Contacts – This contains extracted contacts from the device.
--- Call Logs – Thiscontains extracted call logs from the device.
--- Messages – This contains extracted messages from the device.
--- Event Logs – This contains extracted event logs from the device.
--- Calendars – This contains extracted calendar entries from the device.
--- Tasks – This contains extracted tasks from the device.
--- Notes – This contains extracted notes from the device.
--- URLs – This contains extracted URLs from the device.
--- Locations – This contains extracted locations from the device.
--- Dictionaries – This contains extracted dictionaries from the device.
--- IM Contacts – This contains extracted contacts from Instant
Messengers.
--- IM Call Logs – This contains extracted call logs from Instant
Messengers.
CellDEK® User Manual 82
ANALYZING CAPTURED DATA
--- IM Chat – This contains extracted chat entries from Instant
Messengers.
--- GPS Data – This contains extracted GPS data from GPS devices.
--- Image Files – This contains extracted image files from the device.
--- Video Files – This contains extracted video files from the device.
--- Audio Files – This contains extracted audio files from the device.
--- Other Files – This contains any other extracted files from the device
NOTE: Depending on the device, you may only see some of the icons above. For example:
SIM cards will only show the following buttons: Device Information, Contacts< Call
Logs, and Messages.
Memory Cards will only show the following buttons: Image Files, Audio Files, Video
Files, and Other Files.
Phones will show all buttons (except GPS Data).
GPS will show all buttons.
There are also three icons located at the bottom of the screen:
--- Case Details – This button opens the Case Details Input Form. Data can be edited or added to the form. Please refer back to Chapter 3 – Capturing Data for more information about this form.
--- Report Preview – This button allows you to view the Examination Report.
Please see the section ‘The Examination Report’ later in this chapter for more information.
--- Report Preview – Search for data from an imported keyword list stored on file called “CellDEK Report Search.txt” located on the root of a USB drive.
Keywords can also be added to a custom list.
--- Finished – This button closes the data View Screen and goes back to the
Main Application menu.
CellDEK® User Manual 83
ANALYZING CAPTURED DATA
Keyword Search
To perform a keyword search from the on-screen report, tap the Keyword
Search button. A keyword search window will appear.
Tap the Edit button to edit the keyword search. Using the on-screen keyboard or an attached keyboard, add keywords to the custom list. As you tap the Add button, the keyword entered should appear on the right side.
Tap the Done button when finished.
CellDEK® User Manual 84
ANALYZING CAPTURED DATA
To use an imported keyword list, a keyword list file must first be created then saved on an external USB location (USB flash drive, USB external drive, etc.). Place a check mark on the Use Imported Keyword List box then tap Load button. CellDEK will prompt for the USB drive. When finished, tap the Done button.
To create the keyword list, on a computer, open Notepad or a similar text editor.
Type a simple list of words as shown in the next screen shot below. Words are not case sensitive so type in all lower-case.
Save the file as “Report Search.txt” (case sensitive) and copy it to the root of a USB storage device.
If you are currently searching an extraction that was captured to local drive, then a prompt will appear asking for a USB Storage
Device to be inserted. Attach the USB storage device and tap the
OK button. CellDEK will automatically download the text file.
If you are currently searching an extraction that was captured to external storage, that same external storage device must have the
“CellDEK Report Search.txt” stored on the root directory.
After entering the keywords or selecting the imported keyword list, tap the
Search button. CellDEK will now search all extracted records for the chosen keywords and display the results. To view the each individual record, highlight the record then tap the Select button.
CellDEK® User Manual 85
Viewing Extracted Data
ANALYZING CAPTURED DATA
To view the extracted data, tap one of the icons on the report screen.
CellDEK will display all the extracted data based on your selection.
CellDEK® User Manual 86
ANALYZING CAPTURED DATA
Five buttons are available on each section viewed:
--- Tapping this icon scrolls up one page/entry.
--- Tapping this icon scrolls down one page/entry.
--- Tapping this icon scrolls up within the current page/entry.
--- Tapping this icon scrolls down within the current page/entry.
--- Brings you back to the previous screen to preview another section.
Displaying Previous Extractions
Previously extracted data files can be viewed by selecting “View Previous
Extractions” from the main CellDEK window. Previous extractions are organized by date. Additionally, the user can search for a particular extraction by one of these choices:
Case Reference Number
Exhibit ID
ICCID Number
IMEI Number
CellDEK® User Manual
Previous Extraction List
87
ANALYZING CAPTURED DATA
1. From the Main Application Screen, tap the View Previous
Extractions button. A list of all previous capture sessions will appear.
2. Choose the desired search criteria from the View Detail list on the side of the screen.
3. Scroll to the desired capture session and tap it once to select.
4. Tap the Select button. The CellDEK will show the report via the onscreen report preview.
The Audit Trail
The audit trail is a set of two files that are generated along with the capture session.
Log.dat records all commands sent to and received from the target device. This includes
AT commands.
Audittrail.txt records all data received from the target device.
All three files are stored and moved with the extracted data. They can be accessed once the capture session has been backed up to a USB storage device. They cannot be accessed from within CellDEK . Please refer to Chapter 5 – Other Features for more information on backing up files.
NOTE: Logicube Technical Support may ask the user to send a copy of log.dat for troubleshooting purposes.
The Examination Report
The Examination Report is generated as an SQLite3 file. This SQLite3 file is then translated and converted to an HTML file for easy viewing,
NOTE: XML format is available and can be selected in the CellDEK Setup Screen.See the section ‘System Setup’ in Chpater 5: Other Features.
Printing Reports
CellDEK is able to use a Windows-compatible USB printer to generate hardcopies of reports, print images and other tasks.
Connecting a Printer to CellDEK
CellDEK® User Manual
USB Printer
1. Power up the printer and insert paper.
2. Attach the printer’s USB cable to the USB port on the CellDEK
Control Panel.
88
ANALYZING CAPTURED DATA
3. Tap the “Load Drivers Automatically” button that appears.
Once the USB printer is attached, reports can be printed from the Standard and Extended Data View Screens.
1. From the Standard/Extended Data View Screen , tap the “Case
Details” button.
2. Make any changes (if necessary) to the Case Details Input Form and tap the OK button. A report will automatically generate.
3. Tap the “View Report” button to preview the report.
4. Tap the “Print Report” button to print a hardcopy of the report.
The report shows all information about the capture including target device information, standard data lists, extended data downloaded and lists of extended data not downloaded. It also includes a glossary of terms at the end of the report.
The report will also include the user’s company logo if it is added. Please refer to Chapter 5 – More Features for more details on adding a logo.
NOTE: Some reports can be many pages long. Be sure to review the report before printing.
Supported Printers
CellDEK supports any USB printer that is natively supported by Windows XP. Check with your printer manufacturer to determine if your printer supports
Windows XP.
CellDEK® User Manual 89
5. Other Features
Main Application Screen
This chapter discusses those features of the CellDEK Application that were not covered in previous chapters.
Main Application Buttons
Manage Files
From time to time, previous capture sessions should be copied to an external storage device. This archives the data and frees up space in the CellDEK memory storage. Note all handsets must be disconnected from CellDEK prior to any file management tasks are performed.
USB Storage Device in Port
1. From the Main Application screen, tap the “Manage files” button.
2. The first prompt that appears asks whether the User wishes to Back-Up or Delete
Files.
CellDEK® User Manual 90
OTHER FEATURES
Back-Up/Delete Files Selection
If ‘Backup files’ is chosen, you will see the following selection choices.
No matter which button is tapped, two buttons will appear, “All files” or One by
One”.
CellDEK® User Manual
Back-Up Files Selection
91
OTHER FEATURES
No matter which button is tapped you will be prompted to insert a USB thumb drive.
For Multi-Partition drives the following selection will be displayed. Choose the appropriate storage partition and then tap OK.
If the storage drive has a partition that is not accessible the message shown below will be displayed.
CellDEK® User Manual 92
OTHER FEATURES
Encrypted drives usually have an active partition that contains the password entry application. Below is an example of this type of application. It is called
DTVP_Launcher.exe.
Warning: Please ensure that the above named executable application is from a trusted source. By selecting continue the operator accepts full responsibility for running the named executable and its action.
The drives encryption software will then be run and a keyboard will appear automatically for password entry.
CellDEK® User Manual 93
OTHER FEATURES
NOTE: The encryption software on your Thumb drive may appear different to the example shown above.
The following makes of encrypted drives have been tested:
Hypertec
Transcend
Kingston
Tap OK on the dialog screen shown in to continue to the file selection screen. Files can then be selected, Moved or Copied to the thumb drive as normal.
If the Erase software is loaded on the CellDEK, the data will be completely erased from the unit’s hard drive when ‘Delete files’ is chosen.
NOTE: For more details about Erase, please refer to the “Security Erase” section later in this chapter.
CellDEK® User Manual 94
OTHER FEATURES
If the “All files” button is tapped, all of the stored data from capture sessions can be moved or copied to a USB storage device or deleted. The activity log will show files copied.
If the “One by One” button is tapped, a list of all previous capture sessions will appear. The list looks similar to the image below:
Previous Extraction List
NOTE: The “Free Space” bar underneath the file list shows the amount of free space available on the USB Flash Drive where the files are to be backed up.
Whether the user is downloading all files or one at a time, CellDEK will ask to move or copy the selected files.
Move or Copy Files
If “Move” is pressed, every selected file will be moved to the USB storage device. The file will then disappear from the list. Repeat this step for every file that needs to be copied.
If the Erase software is loaded on the CellDEK, the data will be completely erased from the unit’s hard drive as it is moved to the USB device.
NOTE: For more details about Erase, please refer to the “Security Erase” section later in this chapter.
NOTE: Keeping many previous extractions on the CellDEK will cause a delay during the boot process. It is recommended to back up old extractions from time to time.
CellDEK® User Manual 95
OTHER FEATURES
Extraction File Backup to CD
To be able to backup extracted report files to a writeable
CD, a writeable CD drive is required.
Connect the writeable CD drive to the CellDEK through the
USB port before selecting the manage files option.
Select manage files and choose Backup files then Copy files and One by one. To ensure data is not lost during the burning process CellDEK will not allow files to be moved onto a CD drive. If move is selected then a message is displayed and the copy option is selected as the default.
CellDEK® User Manual
Move or Copy Files
A message box will appear requesting the user to select either burning files to the CD or a removable USB pen drive.
96
OTHER FEATURES
Burn Files to CD
You will then be prompted to select the files to copy. The free space indicator will show available disk space. Once all required files are selected, tap ok, the requested files are then queued for writing to the CD.
Select Files to Burn
A dialog then appears allowing you to name the disk then tap next.
CellDEK® User Manual 97
Name the Disk
OTHER FEATURES
If no disk is inserted in the drive a dialog will appear telling you to insert a disk into the writable CD drive. The burn process will then start. When the files have been copied the following dialog will appear.
Copy of Files Complete
Tap Finish to complete the process.
Software Update Instructions
Software subscriptions are tied to the serial number of your CellDEK device.
These instructions pertain to CellDEK software version 1.23.x.x and above.
The software will automatically verify that your subscription is active and valid. Users will be notified when new software updates are available for download.
Requirements:
A computer with Internet access and a working USB port
A USB flash drive (the recommended format for the USB flash drive is using the exFAT filesystem).
The CellDEK with the AC adapter.
CellDEK Software Update Instructions
The instructions below describe how to update the software on CellDEK:
1. Enter the following URL into your browser:
2. http://www.logicube.com/knowledge/celldek
3. Download CellDEK software and extract/unzip the files to the root of a USB flash drive. On the USB storage device, verify there is a folder called “CellDEK Update” (case sensitive, without the quotes) located on the root of the USB flash drive.
CellDEK® User Manual 98
OTHER FEATURES
4. Connect the AC adapter to the CellDEK and turn the CellDEK on.
Log in to Windows and accept the End User License Agreement when it appears on the screen.
5. From the CellDEK Main Application Screen, tap the Upgrade
Software button.
6. You will be prompted to insert the upgrade key.
7. Attach the USB flash drive used in step 2 to the USB port on the
CellDEK. Wait 5 to 10 seconds then tap the OK button.
NOTE: The USB storage device must be connected during the entire upgrade process.
8. The software update files will automatically download from the USB storage device. When this process is finished, a window will appear stating the application needs to be restarted to complete the upgrade.
9. Tap the OK icon. A confirmation window will appear asking to restart the system.
10. Tap the Yes icon to restart the CellDEK. The CellDEK will reboot.
11. After the reboot process, log into Windows. The upgrade process will continue.
12. When the update process completes, the End User License
Agreement (EULA) will appear. Tap the OK icon to accept the
EULA.
13. The CellDEK software will load and run.
14. Validate the Software version by going to System Setup then
Information. iTunes Information and Updates
Starting with software 1.25.x.x, iTunes will be automatically updated (if needed) during the CellDEK software update.
CellDEK® User Manual 99
System Setup
The System Setup brings up a Setup Menu:
OTHER FEATURES
System Setup Menu
Logical Extraction
Tapping this button brings up the Logical Extraction settings screen.
CellDEK® User Manual
Extraction Settings Menu
Extract Files – Checking this box will cause CellDEK to extract the target device ’s file listing.
Automatically Extract All Files – Checking this box will automatically download all Extended Data files without prompting the user. This includes all image, video, audio and other files.
100
OTHER FEATURES
Skip Messages During Extraction – Checking this box gives the option to skip unread SMS messages during extraction. During a capture session, the following prompt will appear:
CellDEK® User Manual
Skip Unread SMS Prompt
The prompt gives the user 15 seconds to skip or download unread SMS messages. If none of the buttons are pressed, then the messages are skipped.
Do Extended SIM file acquisition – This feature will pull all available data off of the SIM card.
Create Network Isolation Card after SIM Capture – Checking this box will allow selective SIM data to be copied post SIM extraction to a target
Network Isolation Card (NIC). The newly created NIC installed in the handset and contains enough information to appear to be the original SIM card, but it will not have the necessary information to allow the handset to connect to the network. This effectively provides Network Isolation for the phone. For additional information please refer to the supplied NIC v3.0
User Notes.
Extract ALL Android Files – When checked, and the Android device is rooted, ALL file locations will be extracted. Please note this may take a long time to complete the extraction.
If the device is not rooted, only the following file locations will be extracted:
/sdcard/
If the device is rooted and the checkbox for ‘Extract ALL Android files’ is not checked, only the following file locations will be extracted:
/sdcard/
/data/data/
/data/misc/
Export data as XML (as well as SQLite3) – Checking this box will instruct
CellDEK to export the data as XML and SQLite3. Check this box if you prefer an XML output file.
Capture to external storage – CellDEK 1.18.0.0 and newer versions support capturing data directly to a USB thumb drive. When this selection is checked and you perform a new extraction by tapping ‘Read New
Device ’, you will be asked to choose where the extraction files should be stored. A USB thumb drive with a larger capacity than the phone’s memory is recommended.
101
OTHER FEATURES
Drive Selection Screen
Once a drive is selected, CellDEK will continue with the extraction process as normal. CellDEK will store the extraction files in the following directory:
‘[DRIVE]:\CellDEK\Datafiles\’.
CellDEK is capable of detecting encrypted thumb drive software which it will execute allowing you to enter the encryption password. Once the password is entered correctly the drive will appear in the list above.
To view previous extractions which were stored directly on a USB thumb drive, enable ‘Capture to external storage’ in Extraction Settings, and then select ‘View previous extractions’. You will be asked to choose where the extraction files are stored (which drive they are on). Once you have done this, CellDEK will list the previous extractions stored on the thumb drive for you to choose from.
Physical Extraction
Tapping this button brings up the Physical Extraction settings screen.
CellDEK® User Manual 102
OTHER FEATURES
Extract all Android partitions – When checked, and the Android device is rooted, ALL partitions will be extracted.
Recover files from whole partition – This option attempts to recover files from the different partitions.
Export data as XML (as well as SQLite3) – Checking this box will instruct
CellDEK to export the data as XML and SQLite3. Check this box if you prefer an XML output file.
Capture to external storage – This option allows you to save the captured data to an external storage device such as a USB flash drive or USB external drive.
Report Button
Tapping this button brings up the Report Settings screen. Checked items are represented by a blue box.
CellDEK® User Manual
Report Settings Menu
On Screen Report Settings
Show Unread Messages – Un-checking this box prevents
CellDEK from showing any unread SMS messages on screen. This setting can be used for any phones that change extracted unread messages to read status.
Show Hashes – Checking this box will display the MD5
Hash Value for all extracted data files.
Show Error Descriptions – Checking this box will show detailed error descriptions for any failure to extract data. If unchecked, failure messages will read:”An error occurred during the extraction of this section of data”.
Show Image Metadata – Checking this box will include metadata information with any downloaded images.
103
NOTE: All metadata may not be retrieved from every image extraction.
OTHER FEATURES
Show Non-downloaded Files – Un-checking this box replaces the list of non-downloaded files on the screen with a statement that the user has chosen not to show nondownloaded data.
Output Report Settings
Show Unread Messages – Un-checking this box prevents
CellDEK from showing any unread SMS messages on the report.
Show Hashes – Checking this box will display the MD5
Hash Value for all extracted data files.
Show Error Descriptions – Checking this box will show detailed error descriptions for any failure to extract data. If unchecked, failure messages will read:”An error occurred during the extraction of this section of data”.
Show Image Metadata – Checking this box will include metadata information with any downloaded images on the report.
Show Image Thumb Nails – Checking this box will show thumb nail images of any downloaded image files on the report.
Show Non-downloaded Files – Un-checking this box replaces the list of non-downloaded files on the report with a statement that the user has chosen not to show nondownloaded data.
Security Button
This button is activated if the Erase program is loaded on the CellDEK. A single menu choice will appear that asks if secure erase should be used when deleting case files.
CellDEK® User Manual 104
Security Settings Menu
OTHER FEATURES
If “Use secure erase” is checked, a prompt appears asking the user to change or accept default settings.
Secure Erase Default Prompt
If Change is tapped, another prompt appears asking the user which level of security erase should be used.
CellDEK® User Manual
Secure Erase Settings
The settings are:
Pseudo – Erase performs a single pass over the data and writes a pattern of random characters over it.
Gutmann – Erase copies an alternating random pattern 35 times over the data. This verifies that all magnetic traces of the data is gone.
US DoD 5220.22-M – Erase copies an alternating random pattern 7 times over the data. This level of erase conforms to DoD (Department of Defense) specifications.
Security Erase:
CellDEK utilizes a third party utility called Eraser by
Heidi Computers, Ltd. This utility is installed
105
OTHER FEATURES separately from the CellDEK software and is available as a part of software update 1.8.1.0 and up.
CellDEK automatically detects Erase when it is installed on the unit and activated in the Security
Settings Menu.
Information Button
Tapping this button will bring up a screen that shows
Logicube Technical Support contact information.
CellDEK® User Manual
CellDEK Information Screen
It also allows the user to insert his or her company logo into the printed reports.
1. On the user’s PC, rename the logo to LOGO.jpg.
Make sure that it is less than 1MB in size.
NOTE: The logo’s name is case sensitive, so it needs to be written exactly as LOGO.jpg.
2. Copy the logo to the root directory of a USB storage device.
3. In the “About CellDEK ” Screen, tap the “Update
Logo” button.
4. Insert the USB storage device into the USB port.
5. Tap the OK button.
6. The logo will be automatically copied to CellDEK and overwrite any existing logo.
Virus Check
A virus check option has been included within the system setup menu. The user can now run a malware removal tool to check for virus infection.
See the section “Virus Checker” in Chapter 2: Getting
Started for more information.
106
OTHER FEATURES
Auxiliary Power Port
CellDEK has an extra 12VDC power port that is located next to the IR Emitter on the control panel. This port can be used to power such devices as a light source or external jammer.
From the Main Application Screen , tap the “Aux Power” button to turn the port on or off. The button will display the on/off status.
Shutting Down CellDEK
The system can be shut down directly from the Main Application Screen. Tap the “Shut
Down” button and confirm the action. CellDEK will automatically power itself down.
Shutdown Screen
Standby Mode
Additionally, closing the lid of CellDEK while it is powered will send the embedded PC into Standby Mode. When the lid is opened again, the embedded PC will come back up out of standby mode.
NOTE: Once the lid is closed, DO NOT re-open the lid until CellDEK emits
“USB Logoff” tones. Otherwise, CellDEK will “hang”. If this happens, shut down the unit and wait 30 – 60 seconds before powering it back up.
CellDEK® User Manual 107
6. Glossary and Troubleshooting Guide
Supported Manufacturers
CellDEK is able to directly support many different wireless devices. Many of these major brands are supported now or will be in the near future:
Nokia
Motorola
Sony Ericsson
Samsung
Siemens
Audiovox
Kyocera
Palm
LG
Sanyo
Blackberry
Windows
Apple iPhone
TomTom Satellite Navigation Devices
Garmin Satellite Navigation Devices
Glossary
SIM (Subscriber Identity Module) - Essentially a small computer on a card that sits within the mobile phone and controls various functions of call making. It also has enough memory to hold information such as ADN and SMS.
ADN (Abbreviated Dialing Numbers) - more commonly known as the phonebook or contacts.
SMS (Short Message Service) – SMS is a form of textual conversation permitted by a network carrier. The service allows a user to send and receive textual messages direct to their handsets. The storage capacity depends on the handset and SIM. The date and time of received messages is generated by the network, all other date and time stamps are generated from the handset time. The maximum character length is 160 per SMS. Some handsets allow longer messages to be compiled and therefore are split into relevant parts when sent, these messages are known as concatenated.
Deleted SMS (Short Message Service) - These are text messages that have been deleted from the SIM card by the cellphone user. However, most mobile phones do not remove the
CellDEK® User Manual 108
GLOSSARY AND TROUBLESHOOTING GUIDE message, but mark the message to be overwritten by incoming messages from the network.
MMS (Multimedia Messaging Service) – A service which allows Multimedia messages to be sent from one mobile to another via one or more call centres or network providers. A
Multimedia message is stored on the handset and can contain a combination of text, video clips, images and sound clips.
ICCID (Integrated Circuit Card Identifier) - The serial number of the SIM card stored electronically within the SIM. A similar number or shortened version is often found printed on the SIM card.
IMEI (International Mobile Equipment Identifier) - This is a unique number given to each handset. This is usually printed somewhere on the handset, (typically in the battery compartment) and stored electronically in the phone handset memory. It can be viewed typing *#06# on the keypad.
PIN (Personal Identification Number) - The SIM card has been locked against unauthorized access using the PIN number. When PIN security is activated, the correct PIN number must be entered in order to use any of the features of the handset (make calls, access ADN etc.) The only calls that can be made without a PIN are calls to the emergency services.
PUK (Personnel Unblocking Key) - If the PIN is unknown the PUK is used to unblock the
SIM card and enable a new PIN code to be entered.
MSISDN (Mobile Station ISDN Number) - This number is the standard international number used to identify a given subscriber. However, the number stored in the MSISDN location on a SIM Card can be changed without affecting the actual telephone number.
Therefore, the MSISDN number downloaded from the SIM card can only be used as an indicator.
IMSI (International Mobile Subscriber Identity) – This is a unique number allocated to each mobile phone subscriber, stored electronically within the SIM Card. It is used by the network to look up the telephone number associated to the SIM Card.
GSM (Global System for Mobile Communications) - a digital mobile telephone system that is widely used in Europe and other parts of the world. GSM uses a variation of time division multiple access (TDMA) and is the most widely used of the three digital wireless telephone technologies (TDMA, GSM, and CDMA).
CDMA (Code Division Multiple Access) - refers to any of several protocols used in socalled second-generation (2G) and third-generation (3G) wireless communications. As the term implies, CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimizing the use of available bandwidth. The technology is used in ultra-high-frequency (UHF) cellular telephone systems in the 800-MHz and 1.9-GHz bands.
TDMA (Time Division Multiple Access) - is a technology used in digital cellular telephone communication that divides each cellular channel into three time slots in order to increase the amount of data that can be carried.
Cluster The smallest block of memory in a drive that can be written to individually by the file system.
Allocation table Table that keeps track of the contents of each cluster on the drive. The allocation table is used to combine clusters in the correct order to construct the files in the file system.
Allocated space Any cluster that is being used to store a file and has a written entry in the allocation table
CellDEK® User Manual 109
GLOSSARY AND TROUBLESHOOTING GUIDE
Unallocated Space Any clusters that have an empty entry in the allocation table (i.e. are not assigned to any file) and are marked as being available for over writing by the file system.
Extant File A files that is still active in the file system and has appropriate entries in the allocation table to be reconstructed.
Contiguous File A file stored using clusters that are located next to each other in the drive’s memory.
Troubleshooting Guide
CellDEK fails to power up/ no lights on connector rack on power up.
Dimensions entered do not display correct phone
Cell phone not listed or no image can be found.
Infrared discovery failed
Bluetooth extraction failed
Connector not lit
No cable connection method offered
No battery monitor onscreen
The CellDEK battery may be flat.
Try connecting the charger.
NOTE: the embedded PC may still have power when the internal battery does not. No light on the connectors indicates a flat internal battery. The lights should illuminate when the charger is inserted.
Re-measure and re-enter dimensions by adjusting them slightly.
NOTE: The phone may not yet be included in the identification module
Phone may not yet be supported by the identification module. Select a similar device from the listing and use IR or Bluetooth ONLY. Damage to the handset can occur by selecting the wrong cable for a device and is not recommended.
NOTE: The device make and model reported is obtained from the phone not based on the device selected from the identification module.
Ensure infrared is active on target device and IR window is aligned with the CellDEK’s pickup sensor.
Ensure Bluetooth is active on target device and device is in discoverable mode. Also, device may be asking for a 4-digit code number or file acceptance on screen during the extraction.
Ensure cable is replaced correctly and retry then reboot the CellDEK if problem persists.
Ensure all connectors are correctly inserted into the storage rack and reboot the CellDEK.
Connection to hardware com port suspect - reboot
CellDEK.
NOTE: Connector lights should go out as the
CellDEK software opens thus indicating hardware com port success.
CellDEK® User Manual 110
CellDEK application freezes continuously
SIM card read fail
‘SIM PIN required’ message
GLOSSARY AND TROUBLESHOOTING GUIDE
Hold power switch in the ‘on’ position for a few seconds until shutdown. Wait for unit to emit
“beeps” before releasing switch.
Ensure SIM is correctly inserted and in the correct orientation.
Enter PIN code. If entered incorrectly 3 times PUK will be required.
Contact carrier/provider to obtain PUK code.
‘SIM PUK required’ message
CellDEK fails to read memory card
SIM Card LED goes out
Ensure card is inserted correctly. Reboot CellDEK.
If problems persist, hold power switch in the ‘on’ position for a few seconds until shutdown. Wait for unit to emit “beeps” before releasing switch.
Hold power switch in the ‘on’ position for a few seconds until shutdown. Wait for unit to emit
“beeps” before releasing switch.
CellDEK unit freezes or crashes
Error Messages
If an error message occurs during CellDEK use, a small “Help” icon appears in the corner of the error.
Help Icon Location
Tap the Help Icon to bring up a description of the error message and possible solutions.
CellDEK® User Manual 111
7. Supported Handsets
Handsets tested on CellDEK and the results verified
These handsets are assigned a green tick next to their image on CellDEK.
The following handsets have been tested on CellDEK using the standard validation procedures of Logicube. The results below display the data sets that can be extracted from
CellDEK for the specific handset. There may be additional data sets available from handsets and these will require further examination.
Key:
Phone ID
Phone ID w timestamp
Contacts
Call Logs
Call Logs w timestamp
SMS
SMS w timestamp
MMS MMS
Files
Organizer
Handsets that appear with no cable number assigned are supported via Infrared or
Bluetooth methods.
Cable Number 999 refers to the external Nokia CA-42 cable
No. Manufacturer
1
2
3
4
ACER
ACER
ACER
ACER
Model beTouch E101
F900 n50
X960
GSM 9 Jan-10
GSM 9 Jan-10
GSM Jul-06
GSM 9 Oct-09
CellDEK® User Manual 112
5
6
7
8
9
10
11
12
13
14
15
25
26
27
28
29
30
31
32
20
21
22
23
24
16
17
18
19
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
ALCATEL
AMOI
ANDROID
APPLE
APPLE
APPLE
APPLE
BENQ
BENQ
BENQ
SIEMENS
BENQ
SIEMENS
BENQ
SIEMENS
BLACKBERRY
BLACKBERRY
BLACKBERRY
OT-C707
WP-S1
G1 iPhone iPhone 3G iPhone 4 iPad
E72
P50
EF81
S68
8330
8520
8800
8800
8820
8830
8900
9000
S88
7230
7250
7290
8100
8120
8300
8310
8320
SUPPORTED HANDSETS
GSM Apr-08
GSM 9 Apr-09
GSM 9 Jul-08
GSM 31 Oct-08
GSM 31 Oct-09
GSM 31
May-11
N/A
31 Sep-12
GSM 9 Jan-09
GSM 9 Jul-06
GSM Apr-07
GSM Jul-06
GSM
GSM 9
Jul-07
Apr-08
GSM 9 Jul-07
GSM 9 Jan-07
GSM 9 Jul-07
GSM 9 Jan-09
GSM 9 Jan-09
GSM 9 Jul-08
GSM 9 Apr-08
CDMA 9 Jan-09
GSM 26 Jan-10
GSM 9 Jan-10
GSM 9 Oct-08
GSM 9 Apr-08
CDMA 9 Oct-08
GSM 26 Jul-09
GSM 9 Jan-09
CellDEK® User Manual 113
53
54
55
56
57
58
50
51
52
59
60
45
46
47
48
49
40
41
42
43
44
33
34
35
36
37
38
39
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
BLACKBERRY
DELL
E-TEN
GLOFIISH
GLOFIISH
HP
HP
HP
HP
HP
HTC
HTC
HTC
HTC
HTC
9500
9530
9700
7100t
7100v
7100x
8700f
8700g
8700v
8707g
8707v
9780
9800
9650
AXIM X51v
P300B
M810
X600 iPAQ 514 iPAQ H5550 iPAQ HW6915 iPAQ rx1950 iPAQ rz1710
Desire
EVO 4G
Hero
Incredible
Kaizer
SUPPORTED HANDSETS
GSM 26 Jul-09
GSM 26 Jul-09
GSM 26 Sep-10
GSM 9 Apr-06
GSM 9 Apr-06
GSM
GSM
9
9
Apr-06
Jan-07
GSM 9 Jan-07
GSM 9 Oct-07
GSM
GSM
GSM
9
9
26
Oct-09
Jul-07
Dec-11
GSM
GSM
26
26
Dec-11
Dec-11
GSM Oct-06
GSM Oct-07
GSM 9 Oct-09
GSM 9 Oct-08
GSM 9 Oct-07
GSM Jul-06
GSM Oct-06
GSM Jul-07
GSM Jul-06
GSM 26
CDMA 26
May-11
May-11
GSM 9 Oct-09
CDMA 26
May-11
GSM 9 Jan-08
CellDEK® User Manual 114
80
81
82
83
84
85
86
87
88
68
69
70
71
72
61
62
63
64
65
66
67
73
74
75
76
77
78
79
CellDEK® User Manual
HTC
HTC
HTC
HTC
HTC
HUAWEI
HUAWEI
HUAWEI
HUAWEI
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
Magic
NEXUS ONE
P3300
P3450
P3470
P5500
S310
S620
S710
S740
S743
Shadow
SMT5800
Snap
Tattoo
Tornado
Touch
TOUCH
CRUISE
TOUCH
DIMOND
Inspire
ThunderBolt
Sensation
Amaze 4G
Status
U8150
M735
U8800
M860
SUPPORTED HANDSETS
GSM 9 Oct-09
GSM 26
Dec-10
GSM 9 Oct-07
GSM 9 Jul-09
GSM 9 Oct-08
GSM 9 Oct-08
GSM 9 Jul-07
GSM 9 Oct-08
GSM 9 Jul-08
GSM 9 Jul-09
GSM
Dec-10
18
GSM 9 Oct-08
CDMA 9 Sep-10
GSM 9 Oct-09
GSM 9 Jan-10
GSM 9 Jan-08
GSM 9 Oct-07
GSM 9 Apr-09
GSM 9 Jul-09
GSM 26
CDMA 26
GSM 26
GSM
GSM
26
26
GSM 26
CDMA 26
GSM 26
Dec
2011
Dec
2011
Apr-12
Apr-12
Apr-12
Dec
2011
Dec
2011
Apr-12
CDMA 26 Sep-12
115
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
KYOCERA
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
89
90
91
92
114
115
116
117
118
108
109
110
111
112
113
CellDEK® User Manual
JAM
JAMin
JASJAR
K-JAM
PDA2K
SP3i
SP5
SPL
K323
K342
K404
K9
KX1
KX160
KX5
KX9a
S1300
S4000
SE47
M1400
A7110
AX380
C1300i
C1500
C2000
C2500
CE500
CG225
CG300
F2500
SUPPORTED HANDSETS
GSM 9 Jul-06
GSM 9 Jul-06
GSM 9 Oct-06
GSM 9 Jul-06
GSM Jul-08
GSM 9 Jul-06
GSM 9 Jul-06
GSM 9 Jul-07
CDMA
CDMA
CDMA 3
Jan-09
Jan-09
Jul-06
CDMA 3 Jan-09
CDMA 3 Jan-09
CDMA 3 Jan-09
CDMA Jan-09
CDMA 3 Jan-09
CDMA 26 Sep-10
CDMA 26 Sep-10
CDMA 19 Jul-06
CDMA 26
GSM 5
Dec
2011
Jul-06
CDMA 27 Jul-09
GSM 19 Jan-07
GSM
GSM
GSM
19
19
9
Jan-07
Jan-07
Jul-10
GSM
GSM
GSM
5
19
19
Jul-06
Jan-07
Jan-07
GSM Apr-08
116
137
138
139
140
141
142
143
144
145
132
133
134
135
136
125
126
127
128
129
130
131
119
120
121
122
123
124
CellDEK® User Manual
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
F9100
F9200
G4020
G4050
GD900
GS170
GT365
GT950 (Arena)
GW300
GW520
GW820 (Expo)
KC550
KC780
KC910
KE500
KE770
KE800
KE820
KE850
KE970
KF510
KF600
KG200
KG300
KG320
KG800
KG810
SUPPORTED HANDSETS
GSM 19 Jan-07
GSM 19 Jan-07
GSM 19 Apr-08
GSM 19 Jan-07
GSM 26 Jan-10
GSM 26
Dec-10
GSM 27 Sep-10
GSM 26
May-11
GSM 26 Jan-10
GSM
GSM
26 Jan-10
26
May-11
GSM 27 Oct-08
GSM 27 Oct-09
GSM 27 Apr-09
GSM 27 Oct-08
GSM 27 Apr-08
GSM 27 Apr-08
GSM 27 Apr-08
GSM 27 Apr-08
GSM 27 Apr-08
GSM 27 Jan-09
GSM 27 Jan-09
GSM 9 Sep-10
GSM 9 Sep-10
GSM 27 Jul-07
GSM 27 Oct-06
GSM 27 Apr-08
117
153
154
155
156
157
146
147
148
149
150
151
152
158
159
160
167
168
169
170
171
172
173
161
162
163
164
165
166
CellDEK® User Manual
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
MT310
P7200
PM225
PM325
S5200
U8110
U8120
U8130
U8138
U8360
U8380
UN430
KG920
KM710
KM900
KP170
KP500
KU990
L1150
L1200
L1400i
LG6190
LX150
LX160
LX550
LX5550
MM535
MN240
(Imprint)
SUPPORTED HANDSETS
GSM 5 Oct-06
GSM 27 Oct-08
GSM Jan-10
GSM 27 Jan-10
GSM 27 Apr-09
GSM 27 Apr-09
GSM 19 Apr-08
GSM 19 Jan-07
GSM 19 Jan-07
CDMA 6 Sep-10
CDMA 27 Apr-08
CDMA 27 Apr-08
CDMA 6 Apr-08
CDMA 5 Oct-07
CDMA 6 Apr-06
CDMA 26
May-11
CDMA 26
Dec-10
GSM 5 Apr-06
CDMA 6 Apr-06
CDMA 6 Apr-06
GSM 5 Apr-06
GSM 5 Apr-09
GSM 5 Apr-09
GSM 5 Apr-09
GSM 5 Apr-09
GSM 5 Apr-09
GSM 5 Apr-09
CDMA 26 Dec-10
118
190
191
192
193
194
185
186
187
188
189
195
196
197
198
199
200
178
179
180
181
182
183
184
174
175
176
177
CellDEK® User Manual
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
VX5200
VX5300
VX5400
VX5500
VX5600
VX6000
VX6100
VX6190
VX7000
VX8000
UX260
UX300
UX355
UX390
UX4750
UX5000
VI125
VX10000
VX4500
VX4600
VX4700
VX8100
VX8300
VX8350
VX8500
VX8575
VX8610
SUPPORTED HANDSETS
CDMA 27 Oct-09
CDMA 26
Dec-10
CDMA 6 Jul-07
CDMA 6 Jul-07
CDMA 6 Jan-08
CDMA 6 Jan-08
CDMA 6 Apr-06
CDMA 27 Jan-09
CDMA 19 Jul-06
CDMA 19 Jul-06
CDMA 6 Apr-06
CDMA 6 Apr-06
GSM 21 Oct-06
CDMA 27 Jan-09
CDMA 26 Sep-10
CDMA 26
Dec-10
CDMA 5 Jul-06
CDMA 6 Apr-06
CDMA 6 Sep-10
CDMA 6 Jul-06
CDMA 6 Apr-06
CDMA 21 Oct-06
CDMA 27 Apr-08
CDMA 27 Oct-08
CDMA 6 Jul-06
CDMA 26 Sep-10
CDMA 26 Oct-09
119
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
201
202
203
204
205
206
207
208
209
210
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LOBSTER
MIO
MIO
MOTOROLA
LG670
AX145
A701
MB810
(DROID X)
MOTOROLA A555 (Devour)
MOTOROLA
MOTOROLA
MOTOROLA
VX8700
VX8800
VX9100
VX9200
VX9400
VX9700
VX9800
VX9900
P509
KS20
VS750
UX310
MT375
VN530
P505
C729
P925
P930
700TV
A501
A835
A855
C332
SUPPORTED HANDSETS
CDMA 27 Jan-09
CDMA 27 Jan-09
CDMA 26 Jan-09
CDMA 26
Dec-10
CDMA 27 Apr-08
CDMA 26
Dec-10
CDMA 6 Jan-07
CDMA 27 Oct-08
GSM 26
GSM 27
CDMA 26
CDMA 26
CDMA 26
CDMA 26
GSM 26
GSM 26
CDMA 26
Dec
2011
Dec
2011
Dec
2011
Dec
2011
Dec
2011
Dec
2011
Apr-12
Apr-12
Apr-12
CDMA
GSM
19
26
Apr-12
Apr-12
GSM
Apr-12
26
GSM 9 Jan-08
GSM 9 Jul-09
GSM 9 Apr-07
CDMA 26
May-11
CDMA 26
GSM 24 Dec-05
CDMA 26 Sep-10
GSM 9
May-11
Jul-07
CellDEK® User Manual 120
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
246
247
248
249
250
251
252
253
254
255
256
241
242
243
244
245
236
237
238
239
240
229
230
231
232
233
234
235
CellDEK® User Manual
E815
K1
K1m
K3
L2
L6
L7 maxx Ve
MPX200
MPX220
Q
Q9h
QA1
T280i
T300p
U6
E1
E1000
E1070
E398
E8
C343
C350
C385
C390
C550
C650
C975
SUPPORTED HANDSETS
CDMA 24 Apr-06
GSM 9 Apr-06
GSM 9 Dec-05
GSM 9 Dec-05
GSM 9 Dec-05
GSM 9 Dec-05
GSM 24 Dec-05
GSM 24 Apr-06
CDMA 24 Oct-06
GSM 9 Jan-07
GSM 24 Dec-05
GSM Jan-10
CDMA Oct-06
GSM 9 Oct-07
CDMA Apr-07
GSM 9 Jul-07
GSM 9 Apr-06
GSM 9 Apr-06
GSM 9 Oct-06
CDMA Jan-10
GSM 9 Jul-06
GSM 24 Jul-06
GSM 9 Jan-08
GSM 26 Apr-08
GSM 26 Sep-10
GSM Oct-06
CDMA 24 Dec-05
GSM 9 Apr-06
121
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
274
275
276
277
278
279
280
281
282
283
284
269
270
271
272
273
264
265
266
267
268
257
258
259
260
261
262
263
CellDEK® User Manual
V3x
V3xx
V400
V500
V525
V540
V550
V551
V6
V600
V60p
V360
V3a
V3c
V3i
V3m
V235
V260
V265
V3
V300
V1050
V120c
V180
V188
V190
V195
V220
SUPPORTED HANDSETS
GSM 24 Oct-06
CDMA 24 Apr-06
GSM 9 Dec-05
GSM 9 Apr-06
GSM 9 Jul-07
GSM 9 Oct-06
GSM 9 Apr-06
GSM 9 Jan-07
CDMA 24 Jan-08
CDMA 24 Apr-08
GSM 9 Dec-05
GSM 24 Dec-05
GSM 9 Apr-06
CDMA 9
May-11
CDMA Jan-10
GSM 9 Apr-06
CDMA Apr-08
GSM 9 Jul-06
GSM 9 Oct-09
GSM 24 Jan-08
GSM 24 Jul-08
GSM 24 Dec-05
GSM 24 Jul-07
GSM 24 Apr-06
GSM 24 Apr-06
GSM 9 Jul-07
GSM Dec-05
CDMA 24 Dec-05
122
297
298
299
300
301
302
303
304
292
293
294
295
296
285
286
287
288
289
290
291
305
306
307
308
309
310
311
312
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA V860 (Barrage)
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
V60v
V620
V635
V65p
V66i
V70
V710
V8
V80
V9
V950
V975
V980
V9m
VE240
W385
W450
W510
W755
W840
(Quantico)
Z3
Z6
Z6m
Z6tv
Z8
Z9
ZN4
SUPPORTED HANDSETS
CDMA 24 Jul-07
GSM 24 Apr-06
GSM 24 Dec-05
CDMA 24 Apr-08
GSM
GSM
CDMA
24
24
24
Dec-05
Dec-05
Apr-06
GSM Jan-10
GSM 24 Dec-05
CDMA 26
May-11
GSM 26 Apr-08
CDMA Jan-10
GSM 24 Jul-08
GSM 24 Dec-05
CDMA Apr-08
CDMA 9
CDMA Apr-08
GSM Oct-09
GSM
May-11
9 Jan-08
CDMA Jan-10
CDMA 26
GSM 9 Apr-07
GSM
May-11
Jan-10
CDMA Apr-08
CDMA Sep-10
GSM Jul-08
GSM 26 Apr-09
CDMA Jan-10
CellDEK® User Manual 123
313
314
315
316
317
MOTOROLA
MOTOROLA
MOTOROLA
NDRIVE
NEO
318 NOKIA
319 NOKIA
320 NOKIA
321 NOKIA
322 NOKIA
323 NOKIA
324 NOKIA
325 NOKIA
326
327
NOKIA
NOKIA
328 NOKIA
MB860
XT610
MB865
S300
808i
1100
1101
1110
1112
1200
1208
1209
1600
2100
2285
2300
SUPPORTED HANDSETS
GSM 26
Dec
2011
CDMA 26
GSM 26
Dec
2011
Sep-12
GSM 9 Apr-09
GSM Jan-09
GSM
GSM
GSM
GSM
GSM
GSM
GSM
GSM
GSM
25(
CD-
NO
K1) Oct-07
25(
CD-
NO
K1) Oct-07
25(
CD-
NO
K2) Oct-07
25(
CD-
NO
K2) Oct-07
25(
CD-
NO
K1) Jan-08
25(
CD-
NO
K1) Jan-08
25(
CD-
NO
K1) Apr-09
25(
CD-
NO
K2) Oct-07
25(
CD-
NO
K3) Oct-07
CDMA 999 Oct-06
GSM
25(
CD-
NO
K1) Oct-07
CellDEK® User Manual 124
329
330
NOKIA
NOKIA
331 NOKIA
332
333
NOKIA
NOKIA
334 NOKIA
335
336
337
338
339
340
341
342
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
343
344
345
346
NOKIA
NOKIA
NOKIA
NOKIA
347
348
NOKIA
NOKIA
CellDEK® User Manual
2310
2600
2610
2626
2630
2650
2652
2680
2760
3100
3109
3110
3120
3200
3210
3220
3230
3250
3310
3330
SUPPORTED HANDSETS
GSM
GSM
25(
CD-
NO
K2) Oct-07
GSM
GSM
GSM
25(
Jul-08
CD-
NO
K2) Oct-07
25(
CD-
NO
K2) Oct-07
Apr-08
GSM
25(
CD-
NO
K6) Oct-07
25(
CD-
GSM
NO
K6) Oct-07
GSM
GSM
GSM 999 Oct-06
GSM 9
Jan-09
Jan-08
Oct-07
GSM 9 Jul-07
GSM 999 Jul-08
GSM 999 Apr-06
25(
CD-
NO
GSM K8) Oct-07
GSM 999 Apr-07
GSM 12 Apr-07
GSM 12 Apr-07
GSM
GSM
25(
CD-
NO
K9) Oct-07
25(
CD-
NO Jan-08
125
349 NOKIA
350
351
352
353
354
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
359
360
361
362
363
355
356
357
358
364
365
366
367
368
369
370
NOKIA
NOKIA
NOKIA
CellDEK® User Manual
3410
3510
3555
5000
5070
5100
5110
5140
5200
5210
5220
5230
5300
5310
5320
5500
5610
5700
5800
6010
6020
6021
SUPPORTED HANDSETS
K9)
GSM
GSM
CDMA 26 Oct-08
GSM
25(
CD-
NO
K9) Oct-07
25(
CD-
NO
K5) Jan-08
Oct-08
GSM 999 Jul-07
GSM 999 Dec-05
25(
CD-
GSM
NO
K7) Oct-07
GSM 999 Jul-08
GSM
GSM
GSM
9
26
Apr-07
Apr-07
Oct-08
GSM 26 Sep-10
GSM 26 Jan-08
GSM 26 Jan-09
GSM 12 Apr-07
GSM
GSM
9 Apr-07
26 Apr-08
GSM 9 Jul-07
GSM 26 Jul-09
25(
GSM
NO
K5) Oct-07
GSM 999 Dec-05
CD-
GSM 999 Apr-06
126
371 NOKIA
372 NOKIA
373
374
375
376
377
378
379
380
381
382
383
384
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
385
386
387
NOKIA
NOKIA
NOKIA
388
389
390
391
392
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
CellDEK® User Manual
6150
6151
6170
6200
6210
6061
6070
6080
6085
6086
6100
6101
6103
6108
6111
6120
6125
6030
6060
6130
6131
6136
SUPPORTED HANDSETS
GSM
GSM
25(
CD-
NO
K2) Oct-07
25(
CD-
NO
K2) Oct-07
25(
CD-
GSM 999 Oct-06
GSM
GSM
GSM
GSM
NO
K2) Apr-08
999
12
12
Jan-07
Jul-07
Apr-08
GSM 999 Dec-05
GSM 999 Dec-05
GSM 999 Oct-06
GSM 999 Oct-07
GSM 12 Apr-06
GSM 9 Jan-08
GSM 12 Oct-06
GSM
GSM
GSM
25(
CD-
NO
K7) Oct-07
12 Jul-06
12 Jan-07
25(
CD-
GSM
NO
K7) Oct-07
GSM 12 Oct-06
GSM 12 Dec-05
GSM 999 Jul-07
GSM 26 Jul-09
127
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
406
407
408
409
402
403
404
405
393
394
395
396
397
398
399
400
401
410
411
412
413
414
415
416
417
418
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
CellDEK® User Manual
6360
6510
6555
6610
6620
6630
6650
6670
6680
6270
6280
6282
6288
6290
6300
6301
6310
6210
6220
6225
6230
6233
6234
6260
6263
6267
SUPPORTED HANDSETS
25(
CD-
NO
GSM K7) Oct-07
GSM 999 Dec-05
CDMA 999 Jul-07
GSM 12 Apr-06
GSM 12 Oct-06
GSM 12 Jul-07
GSM 12 Jan-07
CDMA 9 Oct-08
GSM 9 Jan-08
GSM
GSM
GSM
GSM
GSM
12 Jul-06
12 Apr-06
12 Jul-07
12
9
Jul-07
Oct-07
GSM 9 Jul-07
GSM 9 Jan-09
GSM Apr-06
25(
CD-
CDMA
NO
K7) Oct-07
GSM Apr-07
GSM 26 Jan-08
GSM 999 Apr-06
GSM 12 Apr-07
GSM Jan-08
GSM 26 Jul-09
GSM 12 Jan-07
GSM 12 Jan-07
128
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
433
434
435
436
437
438
439
440
441
429
430
431
432
425
426
427
428
419
420
421
422
423
424
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
6790
6800
6810
6820
6822
7020
7370
7373
7380
7390
7500
7510
7600
7610
7900
7110
7200
7210
7210
7260
7270
7280
7360
442
443
NOKIA
NOKIA
CellDEK® User Manual
8210
8310
SUPPORTED HANDSETS
GSM 26 Sep-10
GSM 999 Oct-07
GSM 999 Jul-07
GSM 999 Apr-06
GSM 999 Dec-05
GSM 26
Dec-10
25(
CD-
GSM
NO
K7) Oct-07
GSM 999 Oct-06
GSM 26 Jan-09
GSM 999 Dec-05
GSM 999 Apr-06
GSM
GSM
GSM
GSM
12 Dec-05
999
12
Dec-05
Apr-06
Apr-06
GSM 12 Apr-07
GSM
GSM
GSM
9
Apr-06
Apr-07
9 Jan-08
GSM 26 Jul-09
GSM 12 Dec-05
GSM 12 Jan-07
GSM 26 Apr-08
GSM
GSM
25(
CD-
NO
K3) Apr-07
Apr-07
129
453
454
455
456
447
448
449
450
451
452
462
463
464
465
457
458
459
460
461
444
445
446
466
467
468
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
CellDEK® User Manual
8800
8850
8910
1110i
2323 Classic
2330 Classic
2700 Classic
2720 Fold
2730 Classic
2865i
3120 Classic
3155i
3500 classic
3510i
3600 Slide
3720 Classic
5130 Xpress
Music
5140i
5530 Xpress
Music
5630 Xpress
Music
5730 Xpress
Music
6015i
6030b
6110 Navigator
6124c
SUPPORTED HANDSETS
GSM
GSM
Dec-05
Apr-07
GSM Dec-05
25(
CD-
GSM
GSM
NO
K2) Oct-07
Oct-09
GSM
GSM
GSM
GSM
CDMA
GSM
CDMA 12 Apr-08
GSM
26 Oct-09
26
12
26 Apr-09
9
Oct-09
Jan-10
Jan-10
Jan-08
Jan-08
GSM
GSM
GSM
25(
CD-
NO
K5) Oct-07
26 Oct-08
26 Jan-10
GSM 26 Oct-09
GSM 999 Dec-05
GSM 26 Oct-09
GSM 26 Oct-09
GSM 26 Oct-09
CDMA 999 Oct-06
GSM
GSM
25(
CD-
NO
K2) Jan-10
9 Oct-07
GSM 9 Jan-09
130
487
488
489
490
491
482
483
484
485
486
475
476
477
478
479
480
481
469
470
471
472
473
474
492
493
494
495
CellDEK® User Manual
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
6500 classic
6500 Slide
6600 fold
6600 slide
6600i Slide
6610i
6700 Classic
6720 Classic
6730 Classic
6760 Slide
7100
Supernova
7250i
7310
Supernova
7610
Supernova
6155i
6165i
6208 Classic
6212 Classic
6220 Classic
6230i
6235i
6255i
6260 Slide
6265i
6275i
6303 Classic
6310i
SUPPORTED HANDSETS
CDMA 12 Jan-07
GSM 26 Oct-09
GSM 26 Oct-09
GSM 26 Apr-09
GSM
CDMA
12
12
Apr-06
Apr-06
CDMA
GSM
12 Apr-08
CDMA 12 Apr-06
CDMA 12 Jan-08
GSM
GSM
26 Oct-09
12
26
Apr-08
Oct-09
GSM Apr-07
GSM
GSM
GSM
26 Jan-08
26 Apr-08
26 Jan-09
GSM 26 Jan-09
GSM 26 Jan-10
GSM 999 Dec-05
GSM 26 Jan-10
GSM 26 Oct-09
GSM 26 Oct-09
GSM 26 Jan-10
GSM 999 Dec-05
GSM
GSM
Apr-09
26 Oct-08
GSM 26 Oct-08
131
513
514
515
516
517
518
519
520
521
522
523
508
509
510
511
512
503
504
505
506
507
496
497
498
499
500
501
502
CellDEK® User Manual
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
E75
N70
N71
N72
N73
N76
N77
N79
N80
N81 8GB
N82
N85
N90
N91
N93
N93i
8600 Luna
8910i
E50
E51
E55
E60
E61
E63
E65
E66
E70
E71
SUPPORTED HANDSETS
GSM 26 Oct-08
GSM Dec-05
GSM 12 Apr-07
GSM 9 Apr-08
GSM 26 Jan-10
GSM 12 Apr-07
GSM 12 Apr-07
GSM 26 Apr-09
GSM 12 Apr-07
GSM 26 Oct-08
GSM 12 Apr-07
GSM 26 Oct-08
GSM 26 Jul-09
GSM 12 Jan-07
GSM 12 Jul-07
GSM 12 Jan-07
GSM 12 Apr-07
GSM 9 Jul-07
GSM 12 Oct-08
GSM 26 Jan-09
GSM 12 Apr-07
GSM 26 Apr-08
GSM 26 Jul-08
GSM 26 Apr-09
GSM 12 Jan-07
GSM 9 Apr-07
GSM 12 Apr-08
GSM 12 Jul-07
132
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
O2
O2
O2
ORANGE
ORANGE
ORANGE
PALM
PALM
PALM
PALM
PALM
PALM
PANTECH
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
524
525
526
527
528
529
530
531
536
537
538
539
540
541
542
532
533
534
535
543
544
545
546
547
548
549
550
551
N95
N95 8GB
N96
N97
N97 mini
X3
X6
6350
X2-01
ICE
XDA
XDA IIi
SPV C500
SPV C550
SPV C600
700P
Centro
Treo 500
Treo 680
Treo 750
Treo Pro
P8000 my302X my401C my401V my401X my411C my411Cv
SUPPORTED HANDSETS
GSM 9 Jan-08
GSM 9 Jul-08
GSM 26 Oct-08
GSM 26 Oct-09
GSM 26 Sep-10
GSM
GSM
26
26
Dec-10
May-11
GSM 26
Dec
2011
GSM 26
Dec
2011
GSM 5 Oct-07
GSM Jul-06
GSM Jul-06
GSM 9 Jul-06
GSM 9 Jul-06
GSM 9 Jul-06
CDMA 11 Jan-10
GSM 11 Jan-09
GSM 11 Apr-08
GSM Jul-07
GSM 9 Jan-09
GSM 26
Apr-12
GSM Apr-07
GSM 9 Jan-09
GSM Jan-08
GSM Apr-07
GSM Apr-07
GSM Jan-08
GSM Jan-08
CellDEK® User Manual 133
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
SAGEM
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
570
571
572
573
574
575
576
577
578
565
566
567
568
569
558
559
560
561
562
563
564
552
553
554
555
556
557
B7300
C3050
C6625
E1360
E2210
I8000 i8510
M3200
M7500
M7600
M8800
S3030
S3100
S3500 my411X my501C my511X my600v my700X myV-55 myV-65 myX5-2 myX-6
B2100
B2700
B3310
B5702
SUPPORTED HANDSETS
GSM Jan-08
GSM Apr-07
GSM Jan-08
GSM Jul-07
GSM Apr-07
GSM Jan-08
GSM Jan-08
GSM Jan-08
GSM Jan-08
GSM 29 Jul-09
GSM 29 Apr-09
GSM 26 Oct-09
GSM 29 Oct-09
GSM 26 Jan-10
GSM 29 Jul-09
GSM 29 Oct-09
GSM Oct-09
GSM Oct-09
GSM 26 Jan-10
GSM Apr-09
GSM 29 Jan-10
GSM 26 Jul-09
GSM 26 Jul-09
GSM 29 Apr-09
GSM 29 Oct-09
GSM 29 Jan-10
GSM 29 Apr-09
CellDEK® User Manual 134
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
594
595
596
597
598
599
600
601
602
603
604
605
606
586
587
588
589
590
591
592
593
579
580
581
582
583
584
585
SCH-A795
SCH-A850
SCH-A870
SCH-A930
SCH-A950
SCH-A990
SCH-i220
SCH-i600
SCH-i730
SCH-i760
SCH-i920
SCH-R450
SCH-U340
S8000
S8300
SCH-A310
SCH-A530
SCH-A570
SCH-A630
SCH-A650
SCH-A670
S3600
S3650
S5050
S5230
S5600
S7220
S7330
SUPPORTED HANDSETS
GSM Jan-10
GSM 29 Jan-10
GSM 29 Oct-09
GSM 29 Oct-09
GSM 26 Oct-09
GSM 26 Jul-09
GSM 29 Apr-09
GSM 26 Jul-09
GSM 26 Oct-09
CDMA
CDMA
13
13
Apr-06
Apr-06
CDMA 13 Oct-06
CDMA
CDMA
23
13
Oct-06
Apr-06
CDMA 13 Apr-06
CDMA 23 Apr-08
CDMA 23 Apr-08
CDMA 23 Apr-08
CDMA 23 Apr-08
CDMA 23 Apr-08
CDMA 23 Apr-08
CDMA 26
May-11
GSM Jul-06
CDMA Jul-06
GSM 30 Jul-08
CDMA 26
CDMA 29
Dec-10
Jul-09
CDMA 23 Jul-09
CellDEK® User Manual 135
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
629
630
631
632
633
634
635
622
623
624
625
626
627
628
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
SGH-A767
SGH-A777
SGH-A827
SGH-A837
SGH-A877
SGH-A887
SGH-C100
SGH-C207
SGH-C225
SGH-C300
SGH-D307
SGH-D357
SGH-D407
SGH-D410
SCH-U350
SCH-U410
SCH-U650
SCH-U740
SCH-U820
SCH-U940
SGH-A177
SGH-A300
SGH-A517
SGH-A687
SGH-A707
SGH-A717
SGH-A727
SGH-A737
SGH-A747
SUPPORTED HANDSETS
CDMA 29
Dec-10
CDMA 23 Apr-08
CDMA 29 Jul-09
CDMA 22 Jan-10
CDMA 26
Dec-10
CDMA 29 Jul-09
GSM 29 Jan-10
GSM 14 Dec-05
GSM 29 Apr-08
GSM 29
Dec-10
GSM 22 Jan-08
GSM 22 Jan-08
GSM 22 Jan-08
GSM 29 Oct-08
GSM 29 Oct-08
GSM 29 Jul-09
GSM 29
Dec-10
GSM 29 Oct-08
GSM 29 Jul-09
GSM
GSM
GSM
29B
29B
14
Dec-10
Dec-10
Dec-05
GSM
GSM
GSM
GSM
14
14
14
13
Jul-06
Dec-05
Jan-08
Jul-06
GSM 13 Jul-07
GSM Oct-07
GSM 14 Dec-05
CellDEK® User Manual 136
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
654
655
656
657
658
659
660
661
662
649
650
651
652
653
642
643
644
645
646
647
648
636
637
638
639
640
641
SGH-D980
SGH-E105
SGH-E210
SGH-E250
SGH-E330
SGH-E335
SGH-E350
SGH-E370
SGH-E390
SGH-E530
SGH-E570
SGH-E590
SGH-E600
SGH-E630
SGH-D500
SGH-D520
SGH-D600
SGH-D720
SGH-D780
SGH-D800
SGH-D807
SGH-D820
SGH-D830
SGH-D840
SGH-D880
SGH-D900
SGH-D900i
SUPPORTED HANDSETS
GSM 13 Dec-05
GSM 22 Apr-07
GSM 13 Apr-06
GSM 5 Jul-07
GSM 29 Jan-09
GSM 22 Oct-06
GSM 22 Apr-08
GSM 22 Apr-07
GSM 22 Oct-06
GSM 22 Jul-07
GSM 29 Jul-08
GSM 22 Apr-07
GSM 22 Oct-07
GSM 29 Apr-09
GSM 14 Apr-06
GSM Jan-08
GSM 22 Apr-07
GSM 20 Oct-06
GSM 20 Oct-06
GSM 13 Dec-05
GSM 13 Jan-07
GSM 22 Apr-07
GSM Dec-05
GSM 22 Oct-07
GSM
GSM
22 Apr-07
14 Jul-07
GSM 20 Apr-06
CellDEK® User Manual 137
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
680
681
682
683
684
685
686
687
688
689
690
675
676
677
678
679
670
671
672
673
674
663
664
665
666
667
668
669
SGH-E900
SGH-E950
SGH-F110
SGH-F210
SGH-F250
SGH-F300
SGH-F330
SGH-F400
SGH-F480
SGH-F490
SGH-F500
SGH-F700
SGH-G400
SGH-G600
SGH-G800
SGH-G810
SGH-E700
SGH-E715
SGH-E720
SGH-E730
SGH-E740
SGH-E760
SGH-E770
SGH-E800
SGH-E830
SGH-E840
SGH-E870
SGH-E880
SUPPORTED HANDSETS
GSM 20 Dec-05
GSM 14 Oct-06
GSM 5 Dec-05
GSM 13 Dec-05
GSM 22 Jan-08
GSM 13 Dec-05
GSM 13 Apr-06
GSM 20 Dec-05
GSM 22 Apr-08
GSM 22 Oct-07
GSM 22 Oct-06
GSM Jul-07
GSM 22 Jan-07
GSM 22 Jan-08
GSM 29 Oct-08
GSM Jan-08
GSM 29 Jan-09
GSM 22 Jul-07
GSM 29 Jul-08
GSM 29 Jul-08
GSM 29 Jan-09
GSM 29 Jul-08
GSM 22 Oct-07
GSM 29 Apr-09
GSM 29 Apr-09
GSM Jan-08
GSM 29 Jul-08
GSM 26 Apr-09
CellDEK® User Manual 138
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
708
709
710
711
712
713
714
715
716
717
718
703
704
705
706
707
698
699
700
701
702
691
692
693
694
695
696
697
SGH-J610
SGH-J700
SGH-L700
SGH-L760
SGH-L770
SGH-M150
SGH-M610
SGH-P207
SGH-P300
SGH-P310
SGH-P400
SGH-P510
SGH-P520
SGH-P735
SGH-P777
SGH-P850
SGH-i200
SGH-i300
SGH-i320
SGH-i325
SGH-i600
SGH-i607
SGH-i617
SGH-i620
SGH-i710
SGH-i780
SGH-i900
SGH-J600
SUPPORTED HANDSETS
GSM 29 Jan-09
GSM 5 Oct-07
GSM Jan-07
GSM 29 Jan-09
CDMA 9 Oct-07
GSM 22 Jul-07
GSM 29 Oct-08
GSM 22 Jan-09
GSM 22 Oct-07
GSM 29 Jul-09
GSM 29 Jan-09
GSM 22 Jan-08
GSM 29 Oct-08
GSM 29 Jul-08
GSM 29 Jan-10
GSM 29 Oct-08
GSM Jan-09
GSM 29 Oct-08
GSM 29 Oct-08
GSM 13 Oct-06
GSM 22 Apr-06
GSM 22 Apr-07
GSM 14 Dec-05
GSM Dec-05
GSM 29 Apr-08
GSM 5 Dec-05
GSM Jul-06
GSM 13 Oct-06
CellDEK® User Manual 139
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
736
737
738
739
740
741
742
743
744
745
746
731
732
733
734
735
726
727
728
729
730
719
720
721
722
723
724
725
SGH-T539
SGH-T609
SGH-T639
SGH-T719
SGH-T729
SGH-T739
SGH-T749
SGH-T809
SGH-T819
SGH-T919
SGH-U100
SGH-U600
SGH-U700
SGH-U800
SGH-U900
SGH-X100
SGH-S300M
SGH-S307
SGH-S400i
SGH-S401i
SGH-T301
SGH-T309
SGH-T349
SGH-T369
SGH-T429
SGH-T439
SGH-T469
SGH-T509
SUPPORTED HANDSETS
GSM 14 Oct-06
GSM 14 Dec-05
GSM 13 Apr-07
GSM 13 Apr-07
GSM 29 Jan-10
GSM 13 Jul-06
GSM Jan-10
GSM
May-11
26
GSM 29 Jul-08
GSM 29 Oct-08
GSM Sep-10
GSM 22 Jan-07
GSM 29 Apr-08
GSM 13 Jan-07
GSM 29 Oct-08
GSM 13 Jan-07
GSM 29 Apr-08
GSM 29 Oct-08
GSM
Dec-10
29
GSM 22 Jul-06
GSM 29 Oct-08
GSM 29 Jul-09
GSM Jul-07
GSM 22 Jul-07
GSM 22 Jan-08
GSM 29 Jan-09
GSM 29 Jul-08
GSM 20 Oct-07
CellDEK® User Manual 140
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
769
770
771
772
773
774
764
765
766
767
768
759
760
761
762
763
754
755
756
757
758
747
748
749
750
751
752
753
SGH-X660
SGH-X680
SGH-X700
SGH-X820
SGH-X830
SGH-Z240
SGH-Z320i
SGH-Z510
SGH-Z720
SPH-A513
SPH-A580
SPH-A600
SPH-A620
SPH-A640
SPH-A660
SPH-A680
SGH-X427m
SGH-X450
SGH-X460
SGH-X475
SGH-X495
SGH-X497
SGH-X500
SGH-X507
SGH-X530
SGH-X600
SGH-X640
SGH-X650
SUPPORTED HANDSETS
GSM 14 Dec-05
GSM 20 Apr-07
GSM 20 Oct-06
GSM 20 Jul-08
GSM 20 Jul-08
GSM 13 Apr-08
GSM 14 Apr-06
GSM 13 Apr-07
GSM 14 Apr-07
GSM 20 Oct-06
GSM 20 Oct-06
GSM 20 Jul-07
GSM 13 Apr-07
GSM 13 Jul-08
GSM Oct-07
GSM 22 Oct-06
GSM 22 Apr-07
GSM 22 Jul-08
GSM 30 Apr-09
GSM 22 Jul-06
GSM
CDMA
22 Jul-08
29 Jul-09
CDMA
CDMA
13
13
Jan-07
Jul-07
CDMA 13 Oct-06
CDMA
CDMA 13 Apr-06
CDMA
13
13
Jul-07
Jul-07
CellDEK® User Manual 141
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SHARP
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
792
793
794
795
796
797
798
799
800
801
802
787
788
789
790
791
782
783
784
785
786
775
776
777
778
779
780
781
SCH-i400
SPH-D700
SGH-T589
SPH-M910
SCH-R350
SGH-i727
SGH-i897
SGH-i997
SCH-i515
GT-I9100
FX PLUS
A60
A65
A75
C35
C35i
SPH-A740
SPH-A760
SPH-A820
SPH-A840
SPH-A900
SPH-A920
SPH-A960
SPH-M500
SPH-M540
SPH-M610
SGH-T959V
SGH-T249
SUPPORTED HANDSETS
CDMA 13 Apr-06
CDMA 13 Apr-06
CDMA
CDMA
CDMA
CDMA
13
13
13
13
Apr-07
Apr-06
Jul-08
Jul-08
CDMA 13 Jul-08
CDMA 13 Jul-08
CDMA 26 Jul-09
CDMA 22
Dec-10
GSM 26
GSM 26
CDMA 26
CDMA 26
GSM 26
Dec-12
Dec-12
Apr-12
Apr-12
Apr-12
Apr-12
CDMA 26
CDMA 26
GSM 26
GSM
GSM
26
26
CDMA 26
GSM 26
Apr-12
Apr-12
Apr-12
Apr-12
Sep-12
Sep-12
GSM
GSM
GSM
GSM
26
16 Jul-08
16 Dec-05
16
May-12
Apr-06
GSM
GSM
17 Dec-05
17 Oct-06
CellDEK® User Manual 142
820
821
822
823
824
825
826
827
828
815
816
817
818
819
810
811
812
813
814
803
804
805
806
807
808
809
829
830
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SONIM
SONY
ERICSSON
SONY
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
SIEMENS
CellDEK® User Manual
S55
S65
S75
SF65
SK65
SL55
SL65
SP65
XP3
M65
M75
MC60
ME45
ME75
C55
C60
C61
C62
C65
C72
CF110
CF75
CL75
CT66
CX65
M55
C510
C702
SUPPORTED HANDSETS
GSM
GSM
16 Apr-06
16 Apr-06
GSM 16 Apr-06
GSM 16 Dec-05
GSM 16 Dec-05
GSM 16 Jul-06
GSM 16 Apr-06
GSM 16 Apr-06
GSM 16 Apr-06
GSM 16 Apr-06
GSM 16 Dec-05
GSM 16 Jul-06
GSM 16 Dec-05
GSM 16 Apr-06
GSM 16 Dec-05
GSM 17 Jul-08
GSM 16 Apr-06
GSM 16 Apr-06
GSM 16 Dec-05
GSM 16 Apr-06
GSM Jul-06
GSM 16 Dec-05
GSM 16 Dec-05
GSM 16 Dec-05
GSM Jul-09
GSM Oct-09
GSM 18 Apr-09
GSM Oct-08
143
848
849
850
851
844
845
846
847
852
853
854
855
856
840
841
842
843
836
837
838
839
831
832
833
834
835
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
C901
C902
C903
C905
D750i
K300i
K310i
K320i
K500i
K510i
K530i
K550i
K550im
K600i
K608i
K610i
K630i
K660i
F305
F500i
G502
G700
G705
G900
J105i
J300i
SUPPORTED HANDSETS
GSM 18 Oct-09
GSM Oct-08
GSM 18 Oct-09
GSM 18 Apr-09
GSM 18 Apr-06
GSM Oct-09
GSM 2 Dec-05
GSM 18 Oct-08
GSM 18 Jan-09
GSM 18 Apr-09
GSM 18 Jan-09
GSM 18 Sep-10
GSM 2 Dec-05
GSM 2 Dec-05
GSM 18 Oct-06
GSM 18 Jan-09
GSM 2 Dec-05
GSM 18 Jan-07
GSM 18 Jan-08
GSM 18 Jul-07
GSM 18 Jul-07
GSM 2 Dec-05
GSM 2 Oct-06
GSM 18 Oct-06
GSM 18 Jul-08
GSM 18 Jul-08
CellDEK® User Manual 144
873
874
875
876
877
869
870
871
872
878
879
880
881
882
883
861
862
863
864
857
858
859
860
865
866
867
868
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
CellDEK® User Manual
S312
S500i
S700i
S710a
T230
T290i
T300
T310
T610
T630
T650i
T68
T68i
T700
T707
K700i
K750i
K770i
K800i
K810i
K850i
M600
P1i
P800
P900i
P990i
S302
SUPPORTED HANDSETS
GSM 2 Dec-05
GSM 18 Dec-05
GSM 18 Jan-08
GSM 18 Jul-06
GSM 18 Jul-07
GSM 18 Jan-08
GSM
GSM
18
18
Jan-09
Jan-09
GSM Apr-08
GSM Jul-08
GSM
GSM
18 Jan-09
Oct-09
GSM Jan-10
GSM 18 Oct-07
GSM 2 Dec-05
GSM 2 Apr-06
GSM 2 Jul-07
GSM 2 Dec-05
GSM 2 Dec-05
GSM 2 Dec-05
GSM 2 Dec-05
GSM 2 Dec-05
GSM 18 Jan-08
GSM 2 Dec-05
GSM 2 Oct-06
GSM 18 Jan-09
GSM 18 Oct-09
145
900
901
902
903
904
896
897
898
899
905
906
907
908
909
910
888
889
890
891
884
885
886
887
892
893
894
895
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
W302
W350
W380i
W395
W508
W518A
W550i
W580i
W595
W610i
W660i
W705
W710i
W760
W800i
T715
TM506
U100i Yari
U10i Aino
U1i Satio
U5i (Vivaz)
V600i
V630i
V640i
V800
W200i
W300i
SUPPORTED HANDSETS
GSM 18 Jan-10
GSM
GSM
18
18
Dec-10
Jan-10
GSM 18 Jan-10
GSM Jan-10
GSM 26
May-11
GSM 2 Apr-06
GSM 18 Jul-07
GSM 18 Jul-08
GSM 2 Dec-05
GSM 18 Jul-07
GSM Jul-06
GSM Oct-09
GSM 18 Oct-08
GSM 18 Jul-08
GSM
GSM
GSM
GSM
18 Oct-09
18
Oct-09
Dec-10
18 Dec-05
GSM 18 Oct-07
GSM 18 Jan-09
GSM 18 Jul-07
GSM 18 Jan-08
GSM 18 Apr-09
GSM 18 Oct-06
GSM Oct-08
GSM 18 Dec-05
CellDEK® User Manual 146
915
916
917
918
911
912
913
914
919
920
921
922
927
928
929
930
931
923
924
925
926
932
933
934
935
936
937
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
T-MOBILE
W810i
W850i
W880i
W890i
W900i
W902
W910i
W950i
W960
W980
W995
X1
X10
Z1010
Z310i
Z500a
Z520a
Z520i
Z530i
Z550i
Z555i
Z600
Z610i
Z710i
Z770
Z800i
MDA Vario II
SUPPORTED HANDSETS
GSM 18 Jul-06
GSM 18 Oct-06
GSM 18 Apr-07
GSM 18 Jul-08
GSM 18 Apr-06
GSM 18 Apr-09
GSM 18 Jan-08
GSM 18 Jan-09
GSM 18 Jan-09
GSM 18 Jan-09
GSM 18 Oct-09
GSM 9 Jan-09
GSM
GSM
GSM
GSM
26
2
18 Jul-07
2
May-11
Jul-07
Apr-06
GSM 18 Oct-06
GSM 18 Dec-05
GSM 18 Jul-06
GSM 18 Oct-06
GSM 18 Jul-08
GSM 2 Dec-05
GSM 18 Apr-07
GSM 18 Apr-07
GSM Oct-08
GSM 2 Dec-05
GSM 9 Jul-08
CellDEK® User Manual 147
945
946
947
948
949
950
938
939
940
941
942
943
944
TOSHIBA
TOSHIBA
TOSHIBA
TOSHIBA
UBiQUiO
UBiQUiO
VERIZON
VISOA
VODAFONE
VODAFONE
VODAFONE
VODAFONE
VODAFONE
G810
G910
Portege G500
Portege G710
401
501
XV6700
Spiderphone
527
533
710
725
810
SUPPORTED HANDSETS
GSM 9 Jul-09
GSM 9 Jul-09
GSM 9 Jul-07
GSM 9 Apr-09
GSM 9 Jul-07
GSM 9 Jul-07
GSM 9 Oct-07
GSM Jan-10
GSM Jul-09
GSM Jul-09
GSM Oct-07
GSM Jul-09
GSM Jul-08
GSM Jul-09
CDMA Sep-10
951 VODAFONE 830
952 ZTE C78
Handsets
– Expected Support
The following handsets have not been verified on CellDEK however their appearance or technology indicates that data extraction will be possible as shown by the icons on CellDEK. These handsets are assigned an amber tick. It is recommended that all data is treated as a minimum extraction as there may be additional data sets available that require further examination.
Data can be extracted from these handsets as normal by selecting the device from the Manufacturers list and extracting over Bluetooth, Infrared or Cable as required.
All Windows Mobile devices can be extracted using the PDA option and selecting Windows. All
Windows Mobile devices are supported by Infrared and/or Cable.
CellDEK® User Manual 148
MFG
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
ACER
MODEL beTouch
E100 beTouch
E200 c510 c530 c531
DX650
DX900
Liquid
M900 n10 n30 n35 n300 n310 n311 n320 n321 neoTouch
MFG
AIRIS
AIRIS
AIRO
AMOI
T610
T620
A25
E72
ASUS
ASUS
ASUS
ASUS
AMOI
AMOI
AMOI
AMOI
E75
E76
E78
E850
ASUS
ASUS
ASUS
ASUS
AMOI
AnexTEK
AnexTEK
AnexTEK
E860 moboDA
3160 moboDA
3360 moboDA
3380
ASUS
ASUS
ASUS
AT Mobile
AnexTEK SP310
Apple iPod Touch
AT Mobile
AT Mobile
Apple iPhone 5 AT Mobile
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
ASUS
MODEL
P550
P552
P560
P565
P735
P750
P835
V88i
H502
M530W
M356
M930
Mars II
Mypal A626
MyPal A632
MyPal A636
MyPal A636N
MyPal A639
MyPal A686
P305
P320
P505
P525
P526
P527
P535
Z801
Z810
ZX1
AT Bear
AT Cobra
AT Eagle
AT Falcon
SUPPORTED HANDSETS
MFG
AT&T
AT&T
AT&T
AT&T
AT&T
AT&T
AT&T
AT&T
AUDIOVOX
AUDIOVOX
AUDIOVOX
AUDIOVOX
AUDIOVOX
BENQ-
SIEMENS
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
BLACKBERR
Y
CINGULAR
CINGULAR
CINGULAR
CINGULAR
CINGULAR
MODEL
2125
3125
5700
8125
8500
8525
SX56
SX66
5050
5600
6601
XV6600
XV6700
P51
8110
8130 (Pearl)
8220
8230 (Pearl)
Pearl 3G
9100
9105 (Pearl
3G)
Curve 3G
9300
9520
9550
9630
9650 (Bold)
9670 (Style)
Torch 9800
9900
2125
3125
8100
8125
SX66
CellDEK® User Manual 149
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
AT Mobile
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
E-PLUS
E-PLUS
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
DELL
DELL
DELL
DELL
DELL
DELL
ASUS
ASUS
CINGULA
R iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
COMPAQ iPAQ
A696
J501 h6325
3800
3830
3835
3850
3870
3875
3900
3950
3955
3970
3975
DAXIAN CU928
AXIM
Pocket DJ
20GB
Pocket DJ
30GB
X3
X3i
X30
DELL
DELL
DELL
DELL
X5
X50
X50v
X51
DOCOMO htc Z
DOPOD 310
DOPOD
DOPOD
DOPOD
515
535
565
AT Pelican
CHT 9100
D600
D802
D8110
M700
P100
P800W
S300
U1000
PDA III
PDA IV
600
600e
DX900
E500
E900
G500
G500+
M500
M550
M600
M600+
M700
M800
M810
N100
P100
P100w
CellDEK® User Manual 150
SUPPORTED HANDSETS
CINGULAR iPAQ h6320
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
GARMIN-
ASUS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
C550
N100
N110
N500
N520
N520c
N520e
N520p
N560
N560c
N560e
T810
T830
V70
Garminfone
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE g-Smart g-Smart i g-Smart i+ g-Smart i120 g-Smart i128 g-Smart i300 g-Smart i350 g-Smart
MS800 g-Smart
MS802 g-Smart
MS804 g-Smart
MS808 g-Smart
MS820 g-Smart
DOPOD
DOPOD
DOPOD
566
575
585
ETEN
ETEN
ETEN
P120
P300
P600
DOPOD 586 ETEN P603
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
DOPOD
HP iPAQ h2210
HP iPAQ h2215
HP iPAQ h3630
HP iPAQ h3670
HP iPAQ h3800
HP iPAQ h3830
HP iPAQ h3835
HP iPAQ h3850
HP iPAQ h3870
HP iPAQ h3875
HP iPAQ h3900
HP iPAQ h3950
HP iPAQ h3955
HP iPAQ h3970
595
686
696
699
700
710
818
830
838
900
577W
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
ETEN
P610
P700
P700i
T470
T500
V900
X500
X500+
X600
X610
X650
586W
696i
ETEN
EVEREX
X800
NEON
818 Pro
828+
838 Pro
C500
C720W
C730
C800
C858
CHT 9000
FITH MEDIA A308
FLY
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
FUJITSU
SIEMENS
IQ-110
410
420
600
710
718
720
610BT
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ hx2490 hx2495 hx2700 hx2750 hx2790 hx2795 hx4700 hx4705 hx4710
K3 Obsidian rw6815 rw6818 rw6828 rx1700
CellDEK® User Manual 151
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
SUPPORTED HANDSETS
MW700
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
GIGABYTE
HP iPAQ g-Smart
MW702 g-Smart
MW998 g-Smart q60 g-Smart
S1200 g-Smart t600
NEXUS 7
114
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
214
500
510
512
610c
614
614c
9120c
Glisten h1900 h1910 h1915
HP iPAQ h1920
HP iPAQ h1930 h1935 h1937 h1940 h1945 h2200
Galaxy
Gene
Harrier
HD2
Herald
Hermes
Himalaya
Hurricane
Imagio
Inspire 4G
Libra
Love
Magician
MAX 4G
HP iPAQ h3975
HP iPAQ h4140
HP iPAQ h4150
HP iPAQ h4155
HP iPAQ h4350
HP iPAQ h4355
HP iPAQ h5100
HP iPAQ h5150
HP iPAQ h5155
HP iPAQ h5400
HP iPAQ h5450
HP iPAQ h5455
HP iPAQ h5500
HP iPAQ h5555
HP iPAQ h6310
HP iPAQ h6315
HP iPAQ
HP iPAQ h6320 h5325
HP iPAQ h6340
HP iPAQ h6365
HP iPAQ h6500
HP iPAQ hw6510
HP iPAQ hw6515
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HP iPAQ
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HP iPAQ h6515a
HP iPAQ h6710
HP iPAQ h6715
HP iPAQ hw6900
HP iPAQ hw6910
HP iPAQ hw6920
HP iPAQ hw6925
HP iPAQ h6940
HP iPAQ hw6945
HP iPAQ h6965
HP iPAQ hx2000
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
Artemis
Athena
Atlas
Blue Angel
Breeze
Canary
Cavalier
Charmer
Dash 3G
Dream
Elf
EVO View 4G
(Tablet) HP iPAQ hx2090 HTC
HP iPAQ nx2110
HP iPAQ hx2190
HP iPAQ hx2400
HP iPAQ hx2410
HP iPAQ hx2415
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
Excalibur
Falcon
Faraday
Feeler
Flyer (tablet)
Touch Viva IZENMOBILE KRMA KSMT
Tilt
Trinity
Typhoon
KINPO
KINPO
KINPO iDO S601
IDO S630
SP70 rx1950 rx1955 rx3100 rx3110 rx3115 rx3400 rx3415 rx3417 rx3700 rx3710 rx3715 rx4240 rx5700 rx5900 rz1700 rz1715
Advantage
X7500
Advantage
X7501
Advantage
A7510
Alphine
Amadeus
Apache
Aria
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
SUPPORTED HANDSETS
HTC
HTC
Monet
MTeoR
HTC
HTC
HTC
Nike
Oxygen
Ozone
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
P3350
P3400
P3600
P4000
P4350
P4450
P4500
P6300
P6500
Panda
Polaris
HTC Prophet
HTC
HTC
HTC
HTC
HTC
HTC
MITAC
MITAC
MITAC
MITAC
Pure
Robbie
S320
S630
S720
S730
Sensation
4G
Shadow
Hotspot
Shift
Sirius
Sonata
Star Trek
Surround
Tanager
Thunderbolt
Tilt2
Touch2
Touch 3G
Touch
Cruise 09
Touch Dual
Touch HD
Touch Pro
Touch Pro 2
8380
8390
8870
168RS
CellDEK® User Manual 152
HTC
HTC
HTC
HTC
HTC
HTC
HTC
HTC
IMATE
IMATE
IMATE
IMATE
TyTN
Universal
Volans
Vox
Voyager
Wallaby
Wizard
KINPO
KINPO
KROME
KROME
KROME
KROME
KROME
XV6900 KYOCERA
JAM Black LENOVO
JAMA
JAMA101
LENOVO
LENOVO
JAMA 201 LG
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
JAQ
JAQ3
JAQ4
JASJAM
PDA-2
LG
LG
LG
LG
LG
EDVO
PDAL
LG
LG
PDA-N
Phone
Edition
LG
LG
Pocket PC LG
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
IMATE
Smartflip LG
Smartphone LG
Smartphone
2 LG
SP2
SP3
LG
LG
SP4m
SP5m
SPJAS
Ultimate
5150
Ultimate
6150
Ultimate
7150
Ultimate
8150
Ultimate
8502
Ultimate
9150
Ultimate
9502 IMATE
IMATE
INTERME
C
INTERME
C
810-F
730
730B
INTERME 741B
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
MIO
MIO
MIO
SP70R
SP90
Intellekt iQ200
Intellekt iQ700
Mega M900i
Navigator F1
Spy
E1100
ET960
ET980 i921
Incite
AX145
KB770
KC1
KE990
KF300
KF310
KF350
KF700
KF750
KF755
KF770
KF900
SUPPORTED HANDSETS
MITAC
MITAC
336BT
338 Plus
MITAC
MITAC
MITAC
A201
A501
A700
MITAC
MITAC
MITAC
MITAC
A701
A702
P3400
P350
MITAC
MITAC
P550
OP550m
MITAC
MITSUBISHI
P560
Trium
Mondo
MOTOROLA A845
MOTOROLA A3100
MOTOROLA C250
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
C343a
C353
C353t
C380
MOTOROLA E550
MOTOROLA i275
MOTOROLA i720
MOTOROLA i733
KP100
KP501
KS20
MOTOROLA i740
MOTOROLA i920
MOTOROLA i920
KT610
KU380
MOTOROLA
MOTOROLA i930
MC35
Optimus GT540 MOTOROLA MPx
P509 (Optimus
T) MOTOROLA MPx100
U8100
U8150
U8180
U8210
MOTOROLA
MOTOROLA
MOTOROLA
MOTOROLA
T720i
V1150
V120e
V120t
U8290
U8300
Quantum
A502
A702
P3600
MOTOROLA V120x
MOTOROLA V186
MOTOROLA V191
MOTOROLA V330
MOTOROLA V505
MOTOROLA V535
CellDEK® User Manual 153
C
INTERME
C
INTERME
C
INTERME
C
INTERME
C
INTERME
C
INTERME
C i-teq i-teq i-teq
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MOTORO
LA
MWG
MWG
MWG
NEONOD
E
NEONOD
E
NEONOD
E
NEXIO
NEXIO
NOKIA
NOKIA
NOKIA
NOKIA
751B
761B
CN2B
CN3
CN30
Mercury
Bond
Laser
X-Bond
MIO
MITAC
MITAC
MITAC
MITAC
MITAC
MITAC
MITAC
MITAC
NOKIA V60t
V60x
V66
Z10
Backflip
Bravo
Charmer
Cliq 2
Defy
Flipout
Flipside
Atom Life
Atom V
Zinc II
N1
O2
O2
O2
O2
O2
O2
N1m O2
N2
S160
O2
O2
XP40
2320
Classic
O2
2605
O2
O2
2705 Shade O2
3205 O2
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
O2
O2
O2
CellDEK® User Manual
SUPPORTED HANDSETS
P560
168
169
180
336
338
339
558
728
MOTOROLA V557
MOTOROLA V60
MOTOROLA V60c
MOTOROLA V60g
MOTOROLA V60i
MOTOROLA V60s
ORANGE SPV C220 N8
N75
N78
N81
N92
X5
Cosmo
Pocket PC
XDA Argon
ORANGE
ORANGE
ORANGE
ORANGE
ORANGE
ORANGE
ORANGE
ORANGE
XDA Atom ORANGE
XDA Atom Exec ORANGE
XDA Atom Life ORANGE
XDA Atom Pure ORANGE
XDA Comet ORANGE
XDA Cosmo ORANGE
SPV C700
SPV Classic
SPV E100
SPV E200
SPV E600
SPV E610
SPV E650
SPV F600
SPV M1000
SPV M2000
SPV M2500
SPV M3000
SPV M3100
SPV M500
XDA Exec
XDA Flame
XDA Graphite
XDA Guide
XDA Ignito
XDA II
XDA ii mini
XDA iis
MOTOROLA V545
MOTOROLA V547
MOTOROLA V555
ORANGE
ORANGE
ORANGE
ORANGE
ORANGE
ORSiO
ORSiO
ORSiO
SPV M5000
SPV M600
SPV M650
SPV M700
SPV
Smartphone
G735
GN725
N725 GPS
154
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
NOKIA
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
8080
8100
8200
8300
8310
8500
3606
3711
5030
5250
6012
6102
6121
6126
6205
6350
6560
6590
6600
6681
6682
6710
Navigator
6750
7205
7250
8801
8890
6236i
C5
C6
E5
E52
E61i
E62
E66
E72
E90
O2
OKWAP
OKWAP
OKWAP
OKWAP
OKWAP
OPTICON
OPTICON
OPTICON
OPTICON
OPTICON
OPTICON
OPTICON
ORANGE
ORANGE
SAMSUNG
SAMSUNG
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
O2
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
XDA mini S
XDA NEO
XDA Nova
XDA Orbit
XDA Orbit II
SDA Orion
XDA Phone
XDA Stealth
XDA Serra
XDA Stellar
XDA Terra
XDA Trion
XDA Zest
XDA Zinc
Xphone
Xphone ii
Xphone iim
K728
K868
K860
K871
S868
H-16B
H-19A
H-19-B
PHL-5400
PHL-7111
PHL-7114
PHL-7142
SPV C100
SPV C200
S5230W
S5233
S5600v Blade
S5603
S7350
SCH-i830
SUPPORTED HANDSETS
ORSiO
PALM
P745
Treo 700w
PALM
PALM
PALM
Treo 700wx
Treo 750V
Treo 755p
PALM Treo 800w
Tungsten
E2 PALM
PALM Tungsten T5
PANASONIC X700
PANASONIC X800
PANTECH
PARAGON
WIRELESS
PN820
PHAROS
HIPI-2200
600 GPS
Phone
Traveller
GPS 525 PHAROS
NAVIGATOR PN-3550
NAVIGATOR PN-3560
NAVIGATOR PN-P201
NAVIGATOR PN-P550 A
NAVIGATOR PN-P550 A
PSION
TEKLOGIX
PSION
Workabout
PRO
Workabout
TEKLOGIX PRO G2
QOOL LABS QDA Icon
QOOL LABS QDA Lite
QOOL LABS Twins 178
QTEK 1010
QTEK
QTEK
2020
2060
QTEK
QTEK
QTEK
QTEK
7070
8010
8020
8060
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
K610im
K700c
K750c
K758c
K790a
K790c
CellDEK® User Manual 155
8600
9000
9090
9100
9600
2020i
C6
E5
G5
G6
M5
G100
S100
S110
S200
S310
PC6700
S5
S6
S7
W5
N6
N7
P6
P745
Q5
Q6
R5
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
QTEK
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
QUEST
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
PC
ROVER
ROVER
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SHARP
SIEMENS
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SUPPORTED HANDSETS
ERICSSON
SCH-M400
SGH-A257
SGH-A877
SGH-A887
SGH-D300
SGH-
D730(Symbian)
SGH-E808
SGH-i250
SGH-i300x
SGHi400(Symbian)
SGHi450(Symbian)
SGH-i718
SGH-i750
SGH-i760
SGH-i770
SGH-i897
SGH-i917 i9000 (Galaxy S
4G) i9100 (Galaxy S
2)
SGH-
L870(Symbian)
SGH-P730
SGH-T929
SGH-T589
(Gravity Smart)
SGH-T759
(Exhibit 4G)
SGH-T959
SGH-Z600
W-ZERO3
A62
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
SONY
K790i
M608i
S700c
T226
T237
T290a
T616
T637
W300c
W550c
W600
W600c
W710c
W715a
W800c
W810c
W830
W880c
W888c
W900c
Xperia X10
Xperia X10 mini
Xperia X8
Z502a
Z520c
Z525a
Z525i
Z530c
CellDEK® User Manual 156
PC
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
SAMSUN
G
GALAXY
S3
GALAXY
S4
B7320
C6620
C3010
SIEMENS
SIEMENS
SIEMENS
B7330,
OmniaPRO SIEMENS
B7610
OmniaPRO SIEMENS
SIEMENS
SIEMENS
C3110
E1310 i520(Symbi an) i550(Symbi an) i560(Symbi an) i640 i7110(Symb ian) i7500(Andro id) i8910 i907
M7610
Propel Pro
S3110
S3310
SIEMENS
SOCKET
MOBILE
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
T-MOBILE MDA
MDA
T-MOBILE Compact
T-MOBILE
T-MOBILE
T-MOBILE
TOSHIBA
MDA
Compact II TOSHIBA
MDA
Compact III UBIQUIO
T-MOBILE MDA II
T-MOBILE
T-MOBILE
MDA III
MDA Mail
T-MOBILE MDA Pro
UBIQUIO
VELOCITY
MOBILE
VELOCITY
MOBILE
VERIZON
C6620
L56
S56
S66
SX45
SX45i
SX56
SX66
SoMo 650
C901
GreenHeart
G900
J300a
J300c
K300a
K300c
K310a
K310c
K500c
K506c
K510a
K510c h6315
G900
TG01
601
503G
103
111
PN-820
CellDEK® User Manual 157
SUPPORTED HANDSETS
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
SONY
ERICSSON
Z550a
Z550c
Z710c
Z712a
SPRINT
SPRINT
Ace
PPC-6600
SPRINT
SPRINT
SPRINT
SPRINT
TDS
TDS
TDS
TDS
TDS
TDS
T-MOBILE
PPC-6601
PPC-6700
PPC-6800
XV6600
Nomad
800B
Nomad
800L
Nomad
800LC
Nomad
800LE
Ranger
300X
Ranger
500X
Ameo
T-MOBILE
T-MOBILE
T-MOBILE
T-MOBILE
VODAFONE
VODAFONE
VODAFONE
VODAFONE
VOXTEL
VOXTEL
VOXTEL
VOXTEL
Comet
Dash
G2
G2x
VDA V
VPA
Compact
VPA II
Compact
VPA III
W210
W420
W520
W740
SUPPORTED HANDSETS
T-MOBILE
MDA
Pocket PC
WIRELESS
VERIZON
WIRELESS
VERIZON
WIRELESS
XV6600
T-MOBILE MDA Touch XV6800
T-MOBILE MDA Vario VODAFONE v1210
MDA Vario
T-MOBILE VODAFONE v1240
T-MOBILE
III myTouch
3G slide myTouch
VODAFONE v1415
T-MOBILE 4G VODAFONE v1605
T-MOBILE SDA
T-MOBILE SDA II
VODAFONE v1620
VODAFONE v1640
T-MOBILE SDA Music VODAFONE VDA
VDA Compact
T-MOBILE Shadow 2 VODAFONE
T-MOBILE Sidekick 4G VODAFONE
GPS
VDA Compact
IV
T-MOBILE Wing VODAFONE VDA II
Handsets – Other
Other handsets can be tested on CellDEK, however the amount of data extracted has not been assessed and all information should be treated as a minimum data extraction.
GPS Device – Verified CellDEK Support
Key:
The following GPS Devices have been tested on CellDEK using the standard verification procedures of Logicube. The results below display the data sets that can be extracted from CellDEK for the specific handset. There may be additional data sets available from handsets and these will require further examination.
Phone ID
Contacts
Call Logs
Home
Favourites
Recent Destinations
Routes
Routes with
Waypoints
Track Logs
CellDEK® User Manual 158
Call Logs w timestamp
SMS
SMS w timestamp
Location History
SUPPORTED HANDSETS
Track Logs with
Waypoints
Manufacturer Model
1 ACER
2 GARMIN
3 GARMIN
P610 nuvi
250W
nuvi 300
4 GARMIN
5 HP
6 NAVIGON
7 NAVMAN
8 NAVMAN
nuvi 760 iPAQ
314
7210
S50 3D
9 NAVMAN
10 NDRIVE
S70
S70 3D
S300
11 TOMTOM
12 TOMTOM
13 TOMTOM
G0 720
ONE
ONE XL
14 VIAMICHELIN X970
GPS Device – Expected Support
The following GPS Devices have not been verified on CellDEK however their appearance or technology indicates that data extraction will be possible. It is recommended that all data is treated as a minimum extraction as there may be additional data sets available that require further examination.
Data can be extracted from these handsets as normal by selecting either Mass
Storage Device or Windows PDA from the GPS Device list.
Jul
2009
Jul
2009
Jul
2009
Jul
2009
Apr
2009
Jul
2008
Jul
Apr
2009
Oct
2008
Oct
2008
Apr
2009
Jan
2009
2008
Jan
2010
Jan
2010
CellDEK® User Manual 159
SUPPORTED HANDSETS
GARMIN nuvi: 200, 200W, 205, 205W, 250, 255W, 260, 260W, 265T,
265WT, 270, 275T, 350, 360, 370, 500, 550, 600, 610, 650, 660, 670, 680,
750, 755T, 765T, 770, 775T, 780, 785T, 850, 855, 855T, 880, 885T, 1200,
1250, 1260T, 1300, 1350T, 1370T, 1390T, 1490T, 5000
NAVIGON: 1200, 1210, 2100 max, 2110 max, 2150 max, 2200, 2310, 3300
max, 3310 max, 4310 max, 4350 max, 7310, 8110, 8310
NAVMAN: S30, S30 3D, S50, S80, S90i
NDRIVE: G280R, G280S, G400, G800R, S400, Touch, Touch XL
TOMTOM: GO, GO 300, GO 500, GO 510, GO 520, GO 530, GO 540 LIVE,
GO 700, GO 710, GO 730, GO 740 LIVE, GO 910, GO 920, GO 940 LIVE,
XL
Additional Cable Support for PDAs
The set of 5 cable tips can be purchased from http://www.gomadic.com/celldek.html
This will enable the User to extract data from the following 150 PDAs:
PDA Cable Tip 1
DELL: Axim X5
PDA Cable Tip 2
CINGULAR iPAQ: h6320, h6325
COMPAQ iPAQ: 3800, 3830, 3835, 3850, 3870, 3875, 3900, 3950, 3955, 3970, 3975
HP iPAQ: h1900, h1910, h1915, h1920, h1930, h1935, h1937, h1940, h1945, h2200, h2210, h2215, h3800, h3830, h3835, h3850, h3870, h3875, h3900, h3950, h3955, h3970, h3975, h4140, h4150, h4350, h4355, h5100, h5150, h5155, h5400, h5450, h5455, h5500, h5550, h5555, h6315, h6320, h6325, h6340, h6365, hw6500, hw6510, hw6515a, hw6515, hw6710, hw6715, hw6910, hw6915, hw6925, hw6940, hw6965, hx2000-Series, hx2090, hx2110, hx2190, hx2410, hx2415, hx2490, hx2495, hx2700-Series, hx2750, hx2790, hx2795, hx4700, hx4705, hx4710, rx1700-Series, rx1950, rx1955, rx3100, rx3110, rx3115, rx3400, rx3415, rx3417, rx3700, rx3710, rx3715, rz1700, rz1710, rz1715
MOTOROLA: C250
T-MOBILE iPAQ: h6315
PDA Cable Tip 8
AT&T: SX56, SX66
AUDIOVOX: 5050, 6601, XV6600
CellDEK® User Manual 160
SUPPORTED HANDSETS
CINGULAR: SX66
HTC: Blue Angel, Canary, Falcon, Harrier, Himalaya, Tanager, Voyager, Wallaby
I-MATE: PDA2k, PPC Phone, Smartphone 1, Smartphone 2
O2: XDA IIi, XDA IIs, XDA-II, XDA PPC Phone, XPhone I
ORANGE: SPV-E100, SPV-E200, SPV-M1000, SPV-M2000, SPV-Smartphone
QTEK: 1010, 2020, 7070, 8060, 8080, 9090
SIEMENS: SX56, SX66
SPRINT: 6601, XV6600
T-MOBILE: MDA, MDA II, MDA III, PPC Edition
VERIZON: XV6600
PDA Cable Tip 11
DELL: Axim X30, Axim X3i, Axim X3, Pocket DJ 20GB, Pocket DJ 30GB
PDA Cable Tip 13
DELL: Axim X50v, Axim X50, Axim X51v, Axim X51
CellDEK® User Manual 161
8. Index
Alphanumeric Keypad, 58, 59
Android, 20, 25, 65, 66, 67, 68, 69, 101, 103
Google, 65
Rooting, 65
Android ad-hoc Rooting rooting Android phones, 66
Apple, 34, 40, 108
Audiovox, 108
Audit Trail, 6, 88
Battery, 7, 8, 9, 19, 27, 55, 56, 109, 110
Blackberry, 26, 77, 78, 108
Bluetooth, 5, 6, 19, 24, 26, 40, 43, 44, 110, 112, 148
Button, OK, 89, 106
Button, Read New Device, 19, 25, 27, 30, 32, 40
Card, Compact Flash (CF), 9, 31
Card, Flash Memory, 5, 6, 7, 9, 30, 32, 34, 45, 54, 56,
76, 95
Card, Memory Stick, 9, 31, 75
Card, SIM, 5, 6, 7, 9, 27, 28, 41, 45, 46, 47, 53, 55, 62,
74, 101, 108, 109, 111
Card, Smart Disk (SD), 9, 31, 75
Card, Smart Media (SM), 9
Card, xD, 9
Charging Battery, 10
Control Panel, 27, 30, 43, 88, 107
Data, Extended, 32, 45, 61, 81, 89, 100
Data, Standard, 60, 61, 86, 89
Disclaimer, Liability Limitation, I
Emitter, Infrared, 9, 43, 107
External Monitor Jack, 9
Files, Audio, 46, 61
Files, Image, 32, 46, 61, 104
Files, Other, 32, 45, 46, 61, 100
Files, Video, 46, 61
Garmin, 34, 108
Generic Extraction Module, 24
Global Positioning System, GPS, 32, 33, 34
GNU, 171, 175, 176, 178, 179
Hardware License, 181–85
Hardware Licenses, 181
Hash, MD5, 6, 81, 103, 104
Indicator Light, 27, 28, 40, 42, 111
Infrared (IR), 5, 6, 9, 19, 24, 26, 40, 41, 42, 43, 77, 107,
110, 112, 148 iPhone
CellDEK® User Manual 162
Apple, 70, 71, 73 iPhone, Apple, 36, 40, 108 iPod, Apple, 40
JPEG, Deleted, 32
JPEG, Embedded, 32
JPEG, Extant, 32
Kyocera, 108
LG, 108
Login, Operator, 10
Metadata, 103, 104
MMS Message, 76, 109, 112
Motorola, 62, 63, 75, 78, 108
Network Isolation Card, 7, 22, 46, 47, 101
NIC, 101
Nokia, 7, 9, 54, 62, 74, 108, 112
Nokia CA-42 Cable, 7, 54, 112
Non-Latin Language, 62
OPERATING SYSTEM (OS), III, 7, 10, 74, 176, 178, 179
Palm, 25, 108
Password, 10, 26, 77, 78
PC, Examination, 7, 58
PERSONAL DATA ASSISTANT (PDA), I, 5, 6, 25, 26, 32,
33, 42, 148, 165
Phone Cable Adapter Storage Rack, 8
Phone Cable Jack, 9
Phone, Cellular, 6, 7, 8, 19, 21
Physical Extraction, 20, 102
PIN Number, 19, 28, 43, 53, 77, 78, 109, 110, 111
Port, USB, 9, 54, 59, 88, 106
Portable Forensic Laboratory™, I, 5, 7, 8
Power, AC, 7, 8, 9, 10
Power, DC, 9
Powering Up CellDEK, 10
Printer, USB, 88, 89
Reader, Flash Memory Card, 30
Reader, SIM Card, 27
Ruler, 8, 23
Samsung, 62, 108
Sanyo, 108
Screen, Activity Log, 60, 62, 95
Screen, Case Details Input Form, 58, 89
Screen, Cell Phone Models, 22
Screen, Cell Phone Selection, 21
Screen, Connectivity Option, 41, 42, 44, 46, 54
Screen, Device Type Selection, 19, 25, 27, 30, 32, 40
Screen, Discover Devices, 44
Screen, Extended Data View, 89
Screen, Main Application, 9, 11, 16, 19, 25, 27, 30, 32,
40, 54, 61, 88, 90, 107
Screen, Standard Data View, 86
Siemens, 63, 78, 108
SIM Card ID Cloning, 48
SMS Message, 6, 25, 33, 46, 60, 74, 76, 78, 101, 103,
104, 108, 112
Software License, 164, 172, 173
Software Update, 78, 106
Sony Ericsson, 62, 63, 75, 77, 108
Storage Compartment, 9
Stylus, 7, 8, 16
Switch, Power, 10, 111
SUPPORTED HANDSETS
Symbian, 74, 75
Target Device, 5, 7, 19, 23, 40, 41, 42, 43, 44, 58, 60,
61, 62, 88, 89, 100, 110, 111
Technical Support, Logicube, II, 88, 106, 186
TomTom, 33, 108
Touch screen, 7, 8, 16
USB Storage Device, 88, 90, 95, 106
User Name, 10
Virus Checker, 13
Virus Protection virus removal, 12
Warranty, Parts and Labor, I, II, III
Windows, 26, 62, 88, 89, 108, 148
Write Protect, 6, 9, 75
Write-Protected, 8, 9
CellDEK® User Manual 163
CELLDEK® SOFTWARE LICENSE
9. CellDEK Software License
CellDEK Software License - EU
EU CUSTOMER LICENCE
BETWEEN LOGICUBE, INC. (the “Licensor”); and the End User (“You”).
RECITAL
(A)
(B)
(C)
The Licensor is engaged in creating and is the owner of the Software (as hereinafter defined).
The Licensor has agreed to grant You a non-exclusive licence to use the Software (as hereinafter defined) upon the terms and conditions of this Agreement.
The Licensor has provided You with a copy of the End User Software License (as hereinafter defined) which grants You a license to use the Microsoft and related software contained within the PC embedded in the CellDEK device.
OPERATIVE PROVISIONS
1 DEFINITIONS AND INTERPRETATION
1.1 In this Agreement including the Schedule hereto the following words shall have the following meanings:
“Agreement” means this agreement, including its Schedule;
“Business Day” means any day other than Saturdays, Sundays or public holidays in
England;
“Commencement Date” means the date of the Contract;
“Contract” means the contract between the Parties for the purchase of the Goods in which the Software is embedded;
“Customer” means a third party who is licensed by the Licensor to use the Software when it is installed into the Goods;
“End User License” means the paper license provided with the CellDEK device for software within the embedded PC;
“Executable Code” means the fully compiled version of a software programme that can be executed by a computer and used by a Customer without further compilation;
“Force Majeure” means the following:
(a) Acts of God;
(b) outbreak of hostilities, riot, civil disturbance, acts of terrorism;
(c) an act of any government or authority (including refusal or revocation of any licence or consent);
(d)
(e) fire, explosion, flood, fog or bad weather; power failure, failure of telecommunication lines, failure or breakdown of plant, machinery or vehicles;
(f) default of suppliers or sub-contractors;
CellDEK® User Manual 164
1.2
CELLDEK® SOFTWARE LICENSE
(g) theft, malicious damage, strike, lock-out or industrial action of any kind; and
(h) any cause or circumstance whatsoever beyond the reasonable control of a Party;
“Goods” means CellDEK mobile phone and PDA data extraction kit;
“Intellectual Property Rights” means all inventions (whether patentable or not), patents, utility models, designs (both registered and unregistered and including rights in semiconductor topographies), copyright, database rights, trade and service marks (both registered and unregistered) together with all applications for, right to the grant of and extensions of the same, and all other intellectual and industrial property including but not limited to all similar or analogous rights throughout the world, in each case for the full term of the relevant right;
“Licensed Software Materials” means the Software, the Software Documentation, the Periodic New
Releases, any Releases and any fixes created and which are provided to You pursuant to the Contract;
“Periodic New Releases” means a release of the Software that is made available to all Customers and that corrects errors or chan ges or improves the Software’s utility, efficiency or capability and associated cable upgrade specifications and which is provided to You pursuant to the Contract;
“Party” means each of the persons identified as parties to this Agreement and jointly “the Parties”;
“Release” means the most recent standard version of the Software made available to all Customers and which is provided to You pursuant to the
Contract;
“Software” means the software programs in Executable Code only and which are listed in the Schedule;
“Software Documentation” means the instruction manuals, user guides and other information and any modifications or additions thereto to be made available by the
Licensor at its discretion to You in either printed or machine readable form;
“Software Specifications” means the technical specifications from time to time published by the
Licensor in respect of the Software; and
“Use” means the copying or transmission of the Software or (where in machine readable form) the Software Documentation for use in accordance with the instructions contained in the Software or (as the case may be) the
Software Documentation.
In this Agreement unless the context requires otherwise:
1.2.1 the singular includes the plural and vice versa and any gender includes any other gender;
1.2.2 references to Clauses and Schedules are to Clauses of, and schedules to, this Agreement;
1.2.3 any reference to an enactment, order, regulation or other similar instrument includes a reference to that enactment, order, regulation or instrument as from time to time amended, extended or re-enacted;
1.2.4 references to persons include bodies corporate, unincorporated associations and partnerships, and any reference to the Parties include their respective successors, permitted assigns and personal representatives; and
1.2.5 any reference to “company”, “subsidiary” and “holding company”
CellDEK® User Manual 165
CELLDEK® SOFTWARE LICENSE shall be as defined in section 736 of the Companies Act 1985.
1.3 The headings of this Agreement are for ease of reference only and shall not affect its interpretation or construction.
1.4 In the event of a conflict between any of the terms of this Agreement including its Schedules and appendices, the conflict shall be resolved according to the following order of priority:
2
2.1
1.4.1
1.4.2 the Clauses of this Agreement; the Schedules of this Agreement; and
1.4.3 the Recitals.
GRANT OF LICENCE
The Licensor hereby grants to You a non-exclusive non-transferable licence to Use the Software (and where appropriate the
Software Documentation, any Periodic New Releases and any Releases) and to possess and refer to the Software Documentation (the “Licence”) in accordance with and subject to the terms and conditions of this
Agreement.
The Licensor has provided a copy of the the End User License to You. By using the 2.2
Software You are granted a license to the software in PC embedded in the CellDEK device and You agree to be bound by the terms of the End User License agreement.
3 TERM
This Agreement shall commence on the Commencement Date and shall continue in force unless or until terminated by either Party in accordance with the provisions of Clause 10.
4 PROPERTY AND CONFIDENTIALITY IN THE LICENSED SOFTWARE
MATERIALS
4.1 The Licensed Software Materials contain Confidential Information (as defined in Clause 9.1 below) of the Licensor and all Intellectual Property Rights in the Licensed Software Materials are the exclusive property of or are licensed to the Licensor.
4.2 You shall not:
4.2.1 save as provided in Clause 5 below copy the whole or any part of the Licensed Software Materials;
4.2.2 save as required to be permitted by law modify, merge or combine the whole or any part of the Licensed Software Materials with any other software or documentation;
4.2.3 remove or tamper with any proprietary notice contained in the
Licensed Software Materials;
4.2.4 assign, license, transfer, sell, lease, rent, charge or otherwise deal in or encumber the Licensed Software Materials nor use on behalf of or make available the same to any third party; or
4.3
4.2.5 save as required to be permitted by law reverse compile the whole or any part of the Licensed Software Materials from object code into source code.
You shall:
4.3.1 keep confidential the Licensed Software Materials and limit access to the same to those of its employees, agents and sub-contractors who either have a need to know or who are engaged in the Use of the
Software (including where appropriate the Software Documentation);
4.3.2 reproduce on any copy of the Software or Licensed Software
Materials the Licensor’s copyright and trade mark notices;
4.3.3 maintain an up-to-date record of the number of copies of the
Licensed Software Materials and their location and upon request forthwith produce such record to the Licensor;
4.3.4 only use the Software in accordance with the number of copies licensed to You (and as set out in the Schedule);
4.3.5 without prejudice to the foregoing take all such other steps as shall from time to time be necessary to protect the Confidential
Information (as defined in Clause 9.1 below) and Intellectual Property
Rights of the Licensor in the Licensed Software Materials;
4.3.6 in its Use of the Licensed Software Materials comply with all
CellDEK® User Manual 166
CELLDEK® SOFTWARE LICENSE present and future statutes, laws, ordinances, regulations and/or guidelines of any applicable jurisdiction or agency;
4.3.7 ensure that its personnel are, at all times, educated and trained in the proper Use and operation of the Licensed Software Materials;
4.3.8 ensure that the Licensed Software Materials are used in accordance with any and all applicable Software Documentations; and
4.3.9 indemnify and hold harmless the Licensor from and against all claims, damages, losses, judgments, fees, expenses and costs, including legal costs, arising out of or resulting from Your acts, negligence or failure to comply with this Clause 4 or any other provision of this
4.4
Agreement.
You shall inform all relevant employees, agents and sub-contractors that the Licensed Software Materials constitute Confidential
Information (as defined below) of the Licensor and that all Intellectual Property
Rights therein are the property of or are licensed to the Licensor and the
You shall take all such steps as shall be necessary to ensure compliance by its employees agents and sub-contractors with the provisions of this Clause 4.
5 COPYING OF THE LICENSED SOFTWARE MATERIALS
5.1 You shall be entitled to make one back-up copy of the
Software. Any such copy shall in all respects be subject to the terms and conditions of this Agreement and shall be deemed to form part of the Software.
5.2 You shall not be entitled to copy in whole or in part the
Software Documentation.
6 WARRANTY
6.1 Subject to the exceptions set out in Clause 6.3 below and the limitations upon its liability in Clause 7 below the Licensor warrants that:
6.1.1 it has the right, power and authority to license the Licensed
Software Materials upon the terms and conditions of this Agreement; and
6.1.2 the Software will for a period of twelve (12) months from the date it
6.2 is delivered to You conform to the Software Specifications.
You shall give notice to the Licensor as soon as it is reasonably able upon becoming aware of a breach of warranty. If no such notice is given within 30 days of You becoming aware of a breach of warranty, the
Licensor shall not be liable for such breach of warranty.
6.3 The Licensor shall have no liability to remedy a breach of warranty where such breach arises:
6.3.1 in respect of Software that is not properly licensed pursuant to Clause 2 of this Agreement;
6.3.2 in circumstances where You is not in conformity with the minimum technical requirements and prerequisites set out in the
Software Specifications; or
6.3.3 as a result of: a) the improper use, operation or neglect of either the
Software or the Goods upon which the Software is installed or used; b) the modification of the Software or its merger (in whole or in part) with any other software; c) the failure by You to implement recommendations in respect of or solutions to faults previously advised by the Licensor; d) any repair, adjustment. alteration or modification of the Software by any person other than the Licensor without the Licensor's prior consent; e) failure by You adequately to back-up the
Software; f) any breach by You of any of its obligations under any maintenance agreement in respect of the
Goods upon which the Software is installed or used; g) any failure, accident, neglect or misuse of equipment, software or media not supplied by the Licensor;
CellDEK® User Manual 167
CELLDEK® SOFTWARE LICENSE h) Your failure to install and Use in substitution for the previous release any New Release of the Software within ninety (90) days of receipt of the same; or i) the use of the Software for a purpose for which they were not designed.
6.4 Without prejudice to the foregoing the Licensor does not warrant that the
Use of the Software will meet Your requirements or that the operation of the Software (including where in machine-readable form the Software
Documentation) will be uninterrupted or error free.
6.5 Nothing in this Agreement shall obligate the Licensor to improve or otherwise support the Licensed Software Materials.
6.6 Subject to the foregoing all conditions, warranties, terms, representations
(unless fraudulent) and undertakings express or implied, statutory or otherwise in respect of the Licensed Software Materials are hereby excluded to the fullest extent permissible by law.
7 LIMITATION OF LIABILITY
7.1 Where any sustainable claim is made by You in respect of any breach of the warranties given by the Licensor pursuant to clause 6 above, the
Licensor shall be entitled at its option either to replace or repair the Software free of charge. This shall be Your sole and exclusive remedy and the
Licensor shall have no further liability to You for breach of such warranties.
7.2 Subject to Clause 7.1 above and without prejudice to Clause 7.4, and except as otherwise provided in this Agreement, the total liability of the Licensor in contract, tort (including negligence or breach of statutory duty) or otherwise arising by reason of or in connection with this Agreement shall be limited in aggregate to the total price paid and payable by You for the Goods under the Contract.
7.3 Without prejudice to Clause 7.4, in no event shall the Licensor be liable to You for loss of revenue, loss of anticipated savings, loss of profits, loss of data, damage to goodwill, loss of reputation or for any type of indirect, economic or consequential loss or damage whatsoever or howsoever caused.
7.4 Neither party excludes or limits liability to the other for death or personal injury caused by its negligence or for fraud.
7.5 Save as expressly stated in this Agreement, all conditions, warranties and representations (unless fraudulent) expressed or implied by statute, common law or otherwise in relation to the Licensed Software Materials are hereby excluded to the fullest extent permissible by law.
8 RISK IN THE LICENSED SOFTWARE MATERIALS
Risk in the Licensed Software Materials will pass to You upon the date of delivery of the Licensed Software Materials to You.
If subsequently the Licensed Software Materials are (in whole or in part) destroyed, damaged or lost the Licensor will upon written request replace the same subject to You paying its then prevailing
9
9.1 charges.
CONFIDENTIALITY
Neither Party shall use, copy, adapt, alter, disclose or part with possession of any information or data of the other Party which is disclosed or otherwise comes into its possession directly or indirectly as a result of this
Agreement and which is of a confidential nature (“Confidential Information”) without the prior written consent of the disclosing Party except as strictly necessary to perform its obligations or exercise its rights under this Agreement.
9.2 The receiving Party undertakes not to disclose any Confidential
Information of the disclosing Party to any third party other than employees, professional advisors and approved sub-contractors of the receiving Party on a
“need to know” basis only and to whom disclosure is necessary for the proper performance of their duties under this Agreement.
9.3 The foregoing obligations shall not apply to Confidential Information that:
9.3.1 was known to the receiving Party prior to receipt from the
CellDEK® User Manual 168
CELLDEK® SOFTWARE LICENSE disclosing Party; or
9.3.2 is received from a third party without breach of any other confidentiality arrangements; or
9.3.3 is or becomes public knowledge other than by breach of this
Clause or is independently developed by or for the receiving Party; or
9.3.4 is required to be disclosed by any applicable law or by order of any Court of competent jurisdiction or any government body, agency or regulatory body, provided that the receiving Party shall use all reasonable endeavours to give the other Party not less than two business days’ written notice of the disclosure.
9.4 The Parties shall ensure that their respective employees, agents and sub-contractors comply with the provisions of this Clause and are bound by terms and conditions of use and non-disclosure at least as onerous as those contained in this Clause.
9.5 The obligations in this Clause shall continue in force notwithstanding termination of this Agreement for any reason.
9.6 If this Agreement is terminated, the receiving Party shall return or destroy at the request of the disclosing Party all Confidential Information of the disclosing Party.
10 TERMINATION
10.1 This Agreement may be terminated:
10.1.1 by either Party upon giving not less than sixty (60) days written notice to the other;
10.1.2 forthwith by either Party upon giving written notice to the other if the other commits any material breach of this Agreement and which (in the case of a breach capable of remedy) shall not have been remedied within thirty (30) days of a written request to remedy the same (and non-payments of sums when due to the Licensor shall be a material breach);
10.1.3 forthwith by either Party upon giving written notice to the other
Party if the other Party makes or proposes to make any arrangement or composition with its creditors or has a receiver, administrative receiver, administrator, liquidator, manager or similar officer appointed in respect of all or any part of its assets or passes a resolution for winding-up
(otherwise than for the purpose of a solvent amalgamation or reconstruction where the resulting entity assumes all of the obligations of the relevant party under this Agreement), or (in the case of an individual) commits any act of bankruptcy or dies, or (in the case of a partnership) is dissolved, or undergoes or suffers any analogous acts or proceedings under any foreign law;
10.1.4 if the other Party shall commit any act of bankruptcy, shall have a receiving order made against it, shall make or negotiate for any composition or arrangement with or assignment for the benefit of its creditors or if the other party being a body corporate, shall present a petition or have a petition presented by a creditor for its winding up or shall enter into any liquidation (other than for the purpose of reconstruction or amalgamation), shall call any meeting of its creditors, shall have a receiver of all or any of its undertakings or assets appointed, shall be deemed by virtue of section 123 of the Insolvency
Act 1986 to be unable to pay its debts, or shall cease to carry on business; or
10.1.5 forthwith by either Party upon giving written notice to the other if the other shall cease to carry on its business or substantially the whole of its business.
10.2 Any termination of this Agreement (however occasioned) shall not operate so as to affect any accrued rights or liabilities of either Party.
10.3 Within fourteen (14) days of the termination of this Agreement
(howsoever and by whomsoever occasioned) You shall return or destroy (as the Licensor shall instruct) all copies of the Licensed Software
Materials in its possession and a duly authorised officer of You shall
CellDEK® User Manual 169
CELLDEK® SOFTWARE LICENSE certify in writing to the Licensor that You has complied with such obligation.
11 FORCE MAJEURE
11.1 Neither Party shall be liable to the other Party for any delay or non-performance of its obligations under this Agreement to the extent that its performance is interrupted or prevented by Force Majeure.
11.2 Such delay or failure shall not constitute a breach of this Agreement and the time for performance shall be extended by a period equivalent to that during which performance is so prevented provided that if such delay or failure persists for sixty (60) days or more, the Party not affected may, at its option and if it is reasonable for it to do so, terminate this Agreement by giving fourteen (14) days written notice to the other Party.
12 WAIVER
Any failure or delay on the part of either Party to exercise any power or right under this Agreement shall not operate as a waiver of it, nor shall any single or partial exercise of any such right or power preclude any other or further exercise of the right or power. Any of the rights and remedies of either Party under this Agreement may at any time be enforced separately or concurrently with any other rights and remedies, whether under this Agreement or arising by operation of law with the effect that the rights and remedies are cumulative and not exclusive of each other.
13 NOTICES
13.1 Any notices required to be given under this Agreement shall be in writing and delivered personally or by first class post or transmitted by facsimile to the
Parties as set out below:
13.1.1
Address:
The Licensor:
Logicube, Inc.
19755 Nordhoff Place
For attention of:
Chatsworth, CA 91311 USA
COO
13.1.2 You: to the address or facsimile number that You provided for Your purchase of the Software.
13.2 Any notice served by:
13.2.1 delivery; personal delivery, shall be deemed served at the time of
13.2.2 first class post, shall be deemed served at the start of the fifth business day after posting; and
13.2.3 facsimile, shall be deemed served on the day of transmission (or the next following business day if transmitted outside the Party’s normal working hours) provided that the sender shall have received a transmission report indicating that all the pages of the notice have been transmitted to the correct facsimile number.
13.3 Any Party may change any details of its address or facsimile number by notice in the manner described above.
14 SEVERABILITY
If any term or provision of this Agreement or its application to any Party or circumstances shall, to any extent, be invalid or unenforceable, the remainder of this Agreement or the application of the term or provision to any other Party or circumstances, other than those as to which it is already invalid or unenforceable, shall not be affected, and each term and provision of this Agreement shall be valid and enforceable to the fullest extent permitted by law. The Parties shall negotiate in good faith to replace any invalid or unenforceable provisions by substitute
15 provisions.
ENTIRE AGREEMENT
15.1 This Agreement and the Contract constitute the entire agreement
CellDEK® User Manual 170
CELLDEK® SOFTWARE LICENSE between the Parties with respect to the subject matter hereof and supersede and invalidate all prior oral or written communications, understandings, representations or warranties relating to the subject matter hereof.
15.2 Each Party warrants to the other that it has not relied on any such communications, understandings, representations or warranties in entering into this Agreement.
15.3 Notwithstanding anything contained herein to the contrary, the provisions of Clauses 4, 7, 9 and any other Clauses which are intended to survive termination shall survive termination of the Agreement and shall continue in full force and effect thereafter.
16 ASSIGNMENT/SUB-CONTRACTING/AGENCY
16.1 You shall not be entitled to assign, sub-contract or otherwise transfer your rights or obligations under this Agreement whether in whole or in part without the Licensor’s prior written consent.
16.2 The Licensor shall be entitled to assign its rights hereunder (in whole or in part) to any person, partnership or company.
16.3 This Agreement shall be binding upon and inure for the benefit of the
Parties and their respective permitted successors and assigns.
17 THIRD PARTY RIGHTS
A person who is not a Party to this Agreement has no rights under the
Contracts (Rights of Third Parties) Act 1999 to enforce any term of this
Agreement but this does not affect any right or remedy of a third party
18 which exists or is available apart from that Act.
PUBLICITY
The Parties agree to keep confidential the terms of this Agreement, and
19 neither Party shall make any announcement in relation to this Agreement or otherwise publicise its existence or its contents or use or refer to the name, trade mark or trade name of the other Party in any disclosure without the prior written consent of the other Party such consent not to be unreasonably withheld or delayed. A Party shall be entitled to withhold such consent and shall be under no obligation to provide any explanation for such action.
AMENDMENTS
No amendment to this Agreement whether oral or written shall be binding
20 on either Party unless in writing and signed on behalf of the Parties.
GOVERNING LAW AND JURISDICTION
20.1 This Agreement shall be governed by and construed in accordance with
English law.
20.2 It is irrevocably agreed that the English courts shall have non-exclusive jurisdiction as regards any claim or matter arising out of or in connection with this Agreement.
21 NO PARTNERSHIP/AGENCY
22
Nothing in this Agreement is intended to or shall operate to create a partnership or joint venture of any kind between the Parties, or to authorise either Party to act as agent for the other.
THIRD PARTY SOFTWARE
22.1 CellDEK software uses libraries and other components from the LibUSB-Win32 project.
The library is distributed under the terms of the GNU Lesser General Public License
(LGPL).
The other components are distributed under the terms of the GNU General Public
License (GPL).
These licenses are available to read at the LibUSB-Win32 project home-page www.libusb-win32.sourceforge.net
.
22.2.1 The End User License is provided as a paper license along with the CellDEK device.
By using the Software You agree to be bound by the terms of the End User Liclense
Agreement.
Additional copies of this license are also available from Logicube.
CellDEK® User Manual 171
CELLDEK® SOFTWARE LICENSE
CellDEK Software License - US
THIS AGREEMENT shall be binding on installation of the Software and is by and between
LOGICUBE, INC. (“Licensor”) and the End User (“You”).
1. Grant of License. So long as You shall be in compliance with the terms hereof, You shall have a limited, perpetual, non-exclusive and nontransferable license (“License”) to use the Software solely in the course of lawfully operating the device with which the Software is integrated, and for no other purpose. You are also granted a license to use the Microsoft and related software contained within the PC embedded in the CellDEK device and by using such software You agree to be bound by the terms of the End User License agreement, a copy of which is provided to You with the device. Additional copies of the End User License are also available from Logicube.
2. Title. No title or ownership in the Software is transferred to You. Title to all applicable rights in patents, copyrights, trademarks and trade secrets in the Software shall remain in
Licensor. Software licensed hereunder is property of Licensor, and You shall be bound by and observe such nature thereof as herein provided. You shall take appropriate action by instruction to and agreement with its employees, agents, consultants or any other end users who are permitted access to the Software to fulfill its obligations hereunder. Without limiting the foregoing, You shall ensure that any end user license agreement provided with the
Software is brought to the reasonable attention of all such end users. You shall not provide, or otherwise make available, the Software or copies thereof to any third party. All ownership rights to any developments or improvements to the Software made by You shall belong solely to Licensor.
3. Copying.
(a) You shall be entitled to make one copy the Software for back-up and archival purposes.
You shall include in each such copy the Licensor’s copyright notice(s) and trademark(s).
(b) In no event shall You be entitled to remove or tamper with any such proprietary notices contained in the Software.
(c) Software shall not be reverse compiled, disassembled, reverse assembled, or otherwise reverse engineered. All rights in or to the Software not expressly granted to You under this Agreement are retained by Licensor.
4. Warranty.
(a) Subsection 4(b) hereof provides Licensor’s twelve month limited warranty for the Software.
(b) Licensor warrants that for a period of twelve (12) months from installation of the Software, the Software will perform in accordance with the Software documentation. In the event the
Software does not perform in accordance with such documentation, then during such twelve month period, Licensor shall at its option: (i) correct any variance between the Software performance and its documentation; or (ii) replace the Software media. The foregoing shall be Your sole and exclusive remedy with respect to the Software or otherwise hereunder.
EXCEPT AS WARRANTED BY THE PRECEDING THREE SENTENCES, THE SOFTWARE
IS LICENSED AS IS, AND NO WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR
STATUTORY, WHETHER IN RELATION TO MERCHANTABILITY, HIDDEN DEFECTS,
FITNESS FOR PARTICULAR PURPOSE, COURSE OF PERFORMANCE, COURSE OF
DEALING, USAGE OF TRADE, NONINFRINGEMENT, THAT THE SOFTWARE’S
OPERATION SHALL BE ERROR FREE OR UNINTERRUPTED, OR OTHERWISE IS GIVEN
BY LICENSOR TO YOU OR ANY OTHER PARTY. LICENSOR SHALL NOT UNDER ANY
CIRCUMSTANCES BE RESPONSIBLE FOR ANY LOSSES OR DAMAGES, DIRECT,
INDIRECT, SPECIAL, ORDINARY, EXEMPLARY, CONSEQUENTIAL OR OTHERWISE
(INCLUDING, BUT NOT LIMITED TO, LOSS OF DATA, LOSS OF REVENUE, PROFIT OR
USE OR COST OF CAPITAL OR OF SUBSTITUTE USE OF PERFORMANCE), ARISING
OUT OF OR RELATED IN ANY WAY TO THE TRANSACTIONS CONTEMPLATED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. UNDER
NO CIRCUMSTANCES SHALL LICENSOR’S TOTAL LIABILITY OF ALL KINDS ARISING
OUT OF OR RELATED TO THIS AGREEMENT (INCLUDING BUT NOT LIMITED TO ANY
CellDEK® User Manual 172
CELLDEK® SOFTWARE LICENSE
WARRANTY OR SUPPORT-RELATED CLAIMS HEREUNDER), REGARDLESS OF
WHETHER ANY ACTION OR CLAIM IS BASED ON CONTRACT, STRICT LIABILITY, TORT
OR OTHERWISE, EXCEED THE TOTAL AMOUNT PAID BY YOU FOR THE DEVICE WITH
WHICH THE SOFTWARE IS PROVIDED (DETERMINED AS OF THE DATE OF ANY FINAL
JUDGMENT IN SUCH ACTION).
(c) This limited warranty shall be valid and remain in effect only if: (i) the Software is used and maintained by You as directed by all applicable documentation; (ii) You promptly notify Licensor in writing of the claim and is able to reproduce it; (iv) the Software has not in any way been modified and You have not installed any other hardware or software affecting the Software; (v) the claim is unrelated to the failure by You to follow the most current instructions issued by Licensor or its authorized reseller; (vi) the claim is unrelated to the negligence, accident or act of You or any third party; (vii) You provide reasonable access to the Software; (viii) there has been no operation of the Software under conditions more severe than those for which the Software was designed; (ix) the claim is unrelated to force majeure; (x) the claim is unrelated to operator error or to any software, firmware, peripheral or communication device; and (xi) where authorized Licensor updates are provided to You, the Software incorporates all such updates within ninety (90) days of each update being provided or otherwise made available. In the event it is determined that any warranty claim reported by You falls within any of the foregoing exceptions, You shall pay for services at then current rates and charges.
(d) Nothing herein shall obligate Licensor or its authorized reseller to improve or otherwise support any Software licensed hereunder. Without prejudice to the foregoing, all support, enhancements, modifications and upgrades delivered to You, if any, shall be subject to the same protections, restrictions, limited warranty, and limitations on copying and tampering as set forth elsewhere herein.
5. Component Items. In the event that Licensor or its authorized reseller shall deliver to
You any individual components apart from the Software specifically licensed hereunder,
You shall not use or attempt to use any such component outside or independent of the parameter of this License, and each such component shall be subject to the same rules and restrictions binding on You to which the Software is subject, whether under this
Agreement or otherwise.
6. Breach. In the event that either party hereto should breach any of the material terms and conditions of this Agreement, the aggrieved party shall notify the other party. The offending party shall thereafter have 30 days to correct the identified deficiency. In the event such deficiency is not rectified to the satisfaction of the aggrieved party, then the aggrieved party shall be entitled to declare this Agreement null, void and of no further force and effect, and all rights hereunder, including the License granted hereunder, shall be cancelled. In the event of the expiration or termination hereof for any reason (a) You shall continue to observe the limitations and restrictions set forth in Sections 3(b) and (c), 4, 5-7 and 11 hereof, and (b) immediately return or destroy the Software and all copies thereof as directed by Licensor or its authorized reseller and, if requested by Licensor or its authorized reseller, certify in writing as to the destruction or return of the Software and all copies thereof.
7. Confidentiality. You acknowledge and understand that the Software involves highly confidential and trade secret information that belongs to Licensor (“Confidential Information”).
The Confidential Information shall be maintained in absolute confidence by You, not be used other than for the purposes hereof and not be disclosed by You, except as may be permitted under this Agreement, to anyone, without the prior written permission of Licensor.
All Confidential Information coming into Your possession shall be marked by
You as such.
8. Use. (a) You shall be solely responsible for the design, repair and configuration of
Your equipment, machinery, systems and/or products, except where specified in another agreement between the parties hereto. You assume all rights and liability for results obtained by the use or implementation of the Software, whether such results are used singly or in combination with other software or products. You agree that Licensor shall have no liability to You or to any third party for any ordinary, special, indirect, consequential or other damages or losses that might arise directly or indirectly by reason of Your use of the Software. You shall be responsible for use of all hardware, including but not limited to operating procedures, audit controls, accuracy and security of input and output data, restart and recovery routines and other procedures necessary for Your intended use of hardware.
You shall maintain back-up data necessary to replace Your critical data in the event of
CellDEK® User Manual 173
CELLDEK® SOFTWARE LICENSE loss of or damage to such data from any cause. Regardless of the cause of loss of Your data, Licensor shall not in any way be liable therefor.
(b) In Your use of the Software You shall comply with all present and future statutes, laws, ordinances, regulations and/or guidelines of any applicable jurisdiction or agency. You shall ensure that its personnel are, at all times, educated and trained in the proper use and operation of the Software and that the Software is used in accordance with any and all applicable manuals, documentation, and instructions. You shall indemnify and hold
Licensor harmless from and against all claims, damages, losses, judgments, fees, expenses and costs, including attorneys’ fees, arising out of or resulting from Your acts, negligence or failure to comply with this or any other provision of this Agreement.
9. Delay in Performance. Neither party shall be liable for failure or delay in the performance of any of its obligations under this Agreement, except obligations for the payment of money, if such delay or failure is caused by circumstances of force majeure that are beyond the control of the party affected. Notwithstanding the foregoing, in the event that any delay or failure identified in this Section 9 continues for sixty (60) consecutive days, the party adversely affected by such delay may cancel this Agreement and the License granted hereunder upon written notice to the other party.
10. Term. This Agreement, unless terminated pursuant to other applicable provisions hereof, shall commence on the date the Software is purchased and shall be perpetual, unless terminated in accordance with this Agreement.
11. Miscellaneous.
(a) This Agreement shall be governed by and interpreted in accordance with the substantive
(and not conflicts) laws of California. Other than for collection and equitable actions against
You, to the extent legal actions are commenced by or name Licensor, each party hereto:
(i) submits to the exclusive general jurisdiction of the State and Federal Courts in the State of Ohio, and any appellate courts from any decision thereof, in any legal action or proceeding relating to this Agreement; (ii) consents that any such action or proceeding may be brought in such courts; and (iii) waives any objection that he, she or it may have to the venue of any such action or proceeding in any such court or that such action or proceeding was brought in an inconvenient court and agrees not to plead or claim the same. Any action arising hereunder or related in any way hereto against Licensor shall be brought within one
(1) year after the occurrence giving rise to the claim or be barred forever. If any provision or portion of this Agreement is held by a court of competent jurisdiction to be invalid, void, or unenforceable, the remaining provisions or portions of this Agreement shall remain in full force and effect and shall in no way be affected, impaired or invalidated. IT IS EXPRESSLY
UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS
AGREEMENT THAT PROVIDES FOR A LIMITATION OF LIABILITY, DISCLAIMER OF
WARRANTIES OR EXCLUSION OF DAMAGES, IS INTENDED BY THE PARTIES TO BE
SEVERABLE AND INDEPENDENT OF ANY OTHER PROVISION AND TO BE ENFORCED
AS SUCH. You hereby waive any governmental immunity, if applicable, to any and all causes of action arising hereunder or related hereto. All notices required to be given hereunder shall be in writing. Notices shall be considered delivered and effective upon receipt when sent by registered or certified mail, postage pre-paid, return receipt requested, addressed to the parties as set forth above or by telecopy with proof of transmission. Either party, upon written notice to the other, many change the address to which future notices shall be sent.(b) It is expressly declared that this Agreement and the relationship between the parties hereby established do not constitute a partnership, joint venture or agency arrangement between them.
All amounts payable hereunder are exclusive of all freight, insurance and all federal, state,
local, municipal or other excise, sales, use, property or similar taxes, duties, import charges and fees, now in force or enacted in the future, and all such amounts shall be paid by You, unless You provides a certificate of exemption or similar document exempting a payment from an applicable tax.
(c) If You attempt to use, copy, disclose, or transfer any portion of the Software or any modification thereof or Confidential Information in a manner contrary to the terms of this
Agreement or in derogation of Licensor’s rights, whether those rights are explicitly stated, determined by law, or otherwise, Licensor shall have the right, in addition to any other legal remedies available, to injunctive relief enjoining such acts without the posting of bond, it being acknowledged by You that all other remedies are inadequate.
(d) This Agreement contains the entire agreement of the parties with respect to the subject
CellDEK® User Manual 174
CELLDEK® SOFTWARE LICENSE matter hereof, and supersedes and terminates any and all correspondence, proposals, RFPs,
Your purchase order, terms or agreements or contracts, written or oral, entered into between the parties relating to the subject matter hereof, and any representation, promise, or condition in connection herewith not in writing shall not be binding upon either party. Neither the title of this Agreement nor the Section headings shall have any bearing whatsoever on any interpretation hereof. None of the provisions of this Agreement shall be deemed to have been waived by any act of or acquiescence on the part of Licensor, its agents, or employees, but only by an instrument in writing signed by an authorized representative of Licensor. No waiver by Licensor of any provisions of this Agreement shall constitute a waiver of any other provision or of the same provision on another occasion. This Agreement may be amended only in writing signed by each of the parties hereto. This Agreement is personal to You, and You may not assign or sublicense its rights or obligations under this Agreement in any way to any third party. This Agreement shall be binding upon and inure to the benefit of the parties hereto and their respective permitted successors and assigns.
GNU General Public License
CellDEK® User Manual 175
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the
Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
GNU - GENERAL PUBLIC LICENSE
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further
CellDEK® User Manual 176
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free
Software
Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED
GNU - GENERAL PUBLIC LICENSE
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITION
CellDEK® User Manual 177
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the
Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser
General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary
General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General
Public License permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General
Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this
CellDEK® User Manual 178 case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of theusers' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a"work based on the library" and a "work that uses the library".
Theformer contains code derived from the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License").
Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that,
in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to compute square roots has
a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must
CELLDEK HARDWARE LICENSE
be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the
CellDEK® User Manual
179 copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding
machine-readable source code for the Library including whatever
changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked
with the Library, with the complete machine-readable "work that
uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood
that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application
to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (1) uses at run time a
copy of the library already present on the user's computer system,
rather than copying library functions into the executable, and (2)
will operate properly with a modified version of the library, if
the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work
based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not
CELLDEK HARDWARE LICENSE excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and
"any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published bythe
Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE
IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT
WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,
YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE
LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER
SOFTWARE), EVEN IF
CellDEK® User Manual
180
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
CellDEK Hardware Licenses
Panasonic Toughbook License
THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC®
PRODUCT ("PRODUCT") ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE
USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW.
YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE
YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
Matsushita Electric Industrial Co., Ltd. ("MEI") has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product
(including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom.
LICENSE Panasonic Toughbook License
THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC®
PRODUCT ("PRODUCT") ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE
USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW.
YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE
YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.
A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED
LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers.
B. You may use the Programs only on the single Product which was accompanied by the Programs.
C. You and your employees and agents are required to protect the confidentiality of the
Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI.
D. You may not copy or reproduce, or permit to be copied or reproduced, the
Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs.
You shall not modify, or attempt to modify, the Programs.
E. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the
Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred.
CellDEK® User Manual 181
CELLDEK HARDWARE LICENSE
F. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program
CellDEK® User Manual
182
CELLDEK HARDWARE LICENSE
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR
ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN
PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY
COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE
LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY,
EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY
TERMINATED.
TERM
This license is effective only for so long as you own or lease the Product, unless earlier terminated.
You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor set forth elsewhere in this
Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND
AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS
THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US, WHICH
SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY
OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTER OF THIS
AGREEMENT.
About Intel® software products
The enclosed software products and documentation were developed at private expense, and are provided with
“RESTRICTED RIGHTS.” Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intel's proprietary rights in the product.
CellDEK® User Manual
183
CELLDEK HARDWARE LICENSE
Fujitsu P1610 License
Please read this license agreement (“License Agreement”) and the other license agreements, if any, accompanying your Fujitsu computer system before using any of the software provided with and as part of the Fujitsu computer system. By using the software you are agreeing to be bound by the terms of the applicable license agreement. There may be software products included as part of this
Fujitsu computer system which are governed by separate agreements contained within this Fujitsu computer system. Any software contained as part of the Fujitsu computer system that is not governed by a separate applicable agreement is governed by this License Agreement (“Fujitsu
Software”). If you do not agree to these terms, or the terms of any other agreements contained in the Fujitsu computer system, promptly return the Fujitsu computer system and all enclosed material
(including software) to the place where you purchased it for a full refund.
License. The Fujitsu Software is licensed to you, the purchaser, by Fujitsu. The Fujitsu Software and copyright to the printed information contained in this package is and shall remain the intellectual property of Fujitsu and/or its suppliers. This license (“License”) grants to you a non-exclusive right to use the Fujitsu Software on a singe computer system. You may make one copy of the Fujitsu
Software for backup or archival purposes.
Restrictions on Use. The Fujitsu Software contains copyrighted material, and in its human readable form it contains trade secrets and proprietary information owned by or licensed to Fujitsu.
You may not de-compile, disassemble or otherwise reduce it to human readable form. You may not modify, rent, lease, loan or distribute copies of the Fujitsu Software. You may not create derivative software based upon any trade secret or property contained on the Fujitsu computer system and that Fujitsu and its suppliers continue to own title to the Fujitsu Software and copyright to the printed information.
Termination. This License shall remain in full force and effect unless and until terminated. This
License will terminate immediately, automatically and without notice if you fail to comply with any provision of this License Agreement. Upon termination, you must stop using the Fujitsu Software, erase or destroy all copies of the Fujitsu Software, and destroy all printed information provided with the Fujitsu Software.
Limited Warranty. See the Limited Warranty information provided in your Fujitsu computer system package.
Limitation of Liability. IN NO EVENT WILL FUJITSU OR ITS SUPPLIERS OR LICENSORS BE
LIABLE FOR ANY SPECIAL, CONSEUENTIAL, INCIDENTAL OR INDIRECT DAMAGES
(INCLUDING WITHOUT LIMITATIONS LOSS OF PROFIT) ARISING OUT OF YOUR USE OR
INABILITY TO USE THE FUJITSU SOFTWARE OR PRINTED INFORMATION CONTAINED
HEREIN, WHETHER OR NOT FUJITSU HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
LOSS, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS EXCLUSION
INCLUDES ANY LIABILITY THAT MAY ARISE OUT OF THIRD-PARTY CLAIMS AGAINST YOU.
IN NO EVENT WILL THE TOTAL AGGREGATE LIABILITY OF FUJITSU OR ITS SUPPLIERS OR
LICENSORS ARISING OUT OF OR RELATED TO THIS LICENSE AGREEMENT EXCEED THE
AMOUNT PAID BY YOU FOR THE FUJITSU COMPUTER SYSTEM. THESE LIMITATIONS
SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
LIMITED REMEDY.
Export Law Assurances. You agree that the Fujitsu Software and other technical information, both printed and verbal, received from Fujitsu will not be exported outside of the United States except as permitted by the laws and regulations of the United States. If you rightfully obtain the Fujitsu
Software and Fujitsu technical information outside of the United States, you agree not to re-export the Fujitsu Software and information except as permitted by the laws and regulations of the United
States and the jurisdiction in which you obtained the Fujitsu Software.
CellDEK® User Manual
184
CELLDEK HARDWARE LICENSE
US Government Use. Use, duplication or disclosure of the Fujitsu Software by the U.S.
Government is subject to the “Restricted Rights”, as the term is defined in te Department of Defense
(“DOD”) Supplement of the Federal Acquisition Regulations (“DFARS”) in paragraph 252.227-
7013(c)(1)(ii) if to the DOD, or, if the Fujitsu Software is supplied to any unit or agency of the U.S.
Government other than DOD, the Government’s rights in Fujitsu Software shall be as defined in subparagraphs (c)(1) or (c)(2) of FAR 52.227-19, Commercial Computer software –Restricted
Rights; or FAR 52.227-14, Rights in General Data Alternative III, as applicable. Contractor; Fujitsu
Computer Systems Corporation, 1250 East Arques Avenue, Sunnyvale, California.
Consent to Use of Date. You agree that Fujitsu and its affiliates may collect and use technical information gathered in any manner as part of the product support services provided to you, if any, related to the software provided by Fujitsu. Fujitsu may use this information solely to improve our products or to provide customized services or technologies to you. Fujitsu may disclose this information to others, but not in a form that personally identifies you, except to our agents to support this agreement.
Internet-Based Services Components. The software provided by Fujitsu contains components that enable and facilitate the use of certain Internet-based services. You acknowledge and agree that Fujitsu may automatically check the version of the software and/or its components that you are utilizing and may provide upgrades or fixes to the software that will be automatically downloaded to your computer.
Third Party Beneficiary. For all purposes of this License Agreement, each Fujitsu third party licensor of any of the Fujitsu Software shall be expressly deemed an intended third party beneficiary of this License Agreement and shall have the right to enforce the terms and conditions of this
License Agreement.
Entire Agreement; Governing Law. This License Agreement constitutes the entire agreement between you and Fujitsu and supersedes any other prior or contemporaneous agreements or communications regarding the Fujitsu Software. If any provision of this agreement is held invalid, the remainder of this agreement shall continue in effect. The laws of California, excluding
California’s choice of law rules, shall govern this Agreement. Each party agrees to submit to the personal and exclusive jurisdiction of the courts located in Santa Clara County, California.
CellDEK® User Manual
185
MADE OR MANUFACTURED IN USA
CellDEK is a UK, USA and European registered trademark of Logicube, Inc.
19755 Nordhoff Pl., Chatsworth, CA 91311 USA, Tel: 818 700 8488, Fax: 818 700 8466, www.logicube.com
Technical Support Information
For further assistance please contact
Logicube Technical Support at: (001) 818 700 8488, Monday-Friday,
7am-5pm PST (excluding US legal holidays)
or by email to [email protected].
CellDEK® User Manual 186

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Connects to a variety of mobile devices
- Direct connection via cable, IR or Bluetooth
- Built-in device identification module
- Water-resistant, rugged carrying case
- Embedded PC with 30GB of storage
- MD5 Hash to ensure data integrity