Viking LDB-3 Specifications

Viking LDB-3 Specifications
TECHNICAL
Practice
TELECOM SOLUTIONS
FOR THE
W-1000, W -1000-EWP
W-2000A and
W-2000A-EWP
Practice
Handsfree Doorboxes
2 1 S T C E N T U RY
July 30, 2003
Answer Your Door or Gate From Any Phone
in Your Home or Business
Now you can answer your door or gate from the safety of your telephone!
The W-1000 (flush mount) and W-2000A (surface mount) doorboxes are
designed to be installed on the unused telephone line input of nearly any
phone system. One or two doorboxes can also share an existing residential phone line when used in combination with a C-1000A doorbox
controller.
W-1000/W-1000-EWP
When the “Call” button is pressed, the doorbox generates a standard
ring cadence for an adjustable number
of rings. To converse with the visitor, the
inside party simply answers the call from
the phone of their choice.
For outdoor or harsh environments, the W-1000 and W-2000A are available with Enhanced Weather Protection (EWP). The W-1000-EWP and
W-2000A-EWP feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled
butt connectors, as well as urethane encapsulated circuit boards with
internally sealed, field-adjustable trim POTS and DIP switches.
W-2000A/W-2000A-EWP
Features
Applications
W-1000/W-1000-EWP Features
• Commercial, industrial and residential door security
• Door or gate communication
• Use with the C-1000A controller for single line residential systems or when the operation of door strikes or
gate openers are necessary
- Vandal resistant, black powder painted, aluminum
face plate with heavy duty metal call button and
mounting gasket
- Flush mountable using included plastic rough-in box
part # 259576
- Surface mount with optNeed More Information on VE-5x5?
? Call (715) 386-4345 and select 424.
ional VE-5x5 backbox
W-2000A/W-2000A-EWP Features
- Light gray colored, impact resistant, U.V. stable,
plastic chassis
- Surface mountable only
• New high output speaker amplifier with volume
adjustment POT
• Microphone volume adjustment POT
• 24 volt talk battery
• 20 Hz ring generator (3.0 REN ring load maximum)
• Selectable number of rings (2, 3, 10 or 30)
• Extended operating temperature range: -15°F to 130°F
• Compact 45° terminal strip for easy wiring
• Optional Enhanced
Need More Information on EWP?
? Call (715) 386-4345 and select 859.
Weather Protection
h t t p : / / w w w. v i k i n g e l e c t r o n i c s . c o m
Phone...715.386.8861
Specifications
Power: 120V AC/13.8V AC 1.25A UL listed adapter provided
Dimensions: W-1000 - Overall - 127 x 127 x 57 mm (5.0 x 5.0
x 2.25”), Plastic Electrical Box - 102 x 102 x 57mm (4 x 4 x
2.25”), W-2000A - 140 x 115 x 38mm (5.5” x 4.5” x 1.5”)
Shipping Weight: W-1000 - 1.36 kg (3 lbs), W-2000A - .75 kg
(1.5 lbs)
Standard W-1000/W-2000A Environment: -26° C to 54° C (-15°
F to 130° F) with 5% to 95% non-condensing humidity
W-1000-EWP/W-2000A-EWP Environment: -26° C to 54° C (15° F to 130° F) with up to 100% condensing humidity
Ringer Output: 3.0 REN maximum, 20Hz
Ring Cadence: 1 second ON, 3 seconds OFF
Maximum Loop Length: 1.9 Km (6300 ft) - 24 AWG twisted pair
Maximum Power Run: 45.7 m (150 ft) - 24 AWG twisted pair
Speaker Volume: Approximately 70db maximum @ 1m
Standard Connections: (1) 4-position terminal block
EWP Connections: (4) gel-filled butt connectors
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666
Our Technical Support Department is available for assistance Monday 8am-4pm and Tuesday through Friday 8am-5pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Technical Practice in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR REPAIR
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)
number. The customer MUST have a complete description of the problem, with all pertinent information regarding the
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
Viking Electronics, 1531 Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The
customer MUST be able to step through recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
Viking using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't
followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.
WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.
Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED
BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
Installation
A. Mounting the W-1000 and W-1000-EWP
The W-1000 and W-1000-EWP are designed to be flush mounted to the included 4” x 4” x 2” deep plastic rough in box or surface
mounted using optional Viking model VE-5x5. Note: The W-1000/W-1000-EWP will NOT mount to a standard double gang box. The
plastic rough in box (part # 259576) may be purchased separately. Go to www.vikingelectronics.com and click on “Spare Parts”.
2.1”
Front View of Plastic
Rough-In Box (included)
* 1/8" thick foam gasket (included)
4.0"
Wall Stud
* Note: Peel off paper liner and
adhere gasket to the back of the
faceplate, centering it over the four
corner mounting holes.
5.0” Typical
l
Cal
Wire knock out
(2) Standard flat head dry wall
(sheet rock) screws (not included)
5.22”
Push to Call Button
(4) 6-32 X 3/4” black plated stainless steel,
flat head, hexdrive, screws (included)
Condensation Drain Hole
3.25”
(4) 0.38” diameter (for gooseneck mounting)
(4) 0.2 x 0.43 slots for double gang box
(2) 0.2 x 0.43 slots for single gang box
5.14”
(1) .74" dia
3.0” 3.3”
Condensation
Drain Hole
Front View of Optional
VE-5x5 (not included)
2.25”
W-1000 shown in
VE-5x5 with Viking
Model VE-GNP
Gooseneck
Pedestal
Caution: When warm air comes in contact with cold surfaces, such as outside
walls, it causes condensation. To help
prevent condensation from accumulating inside the W-1000, bring conduit into
the bottom of the unit. If this is not possible, drill a 1/4” diameter hole in the
bottom of the plastic rough-in box.
The optional VE-5x5 Surface Mount Box is designed to be surface
mounted to a single gang box, double gang box or VE-GNP gooseneck pedestal (right).
Need More Information on VE-5x5 or VE-GNP?
?
3.0”
Call (715) 386-4345 and select 424.
Rear View of VE-5x5 (not included)
B. Mounting the W-2000A and W-2000A-EWP
The W-2000A and W-2000A-EWP are designed to be surface mounted to a single gang box (not included), a standard 4” x 4” electrical junction box (not included), or directly to a wall or flat sided post.
Front view of the
W-2000A/W-2000A-EWP
Back panel of the
W-2000A/W-2000A-EWP
Side view of the
W-2000A/W-2000A-EWP
3.40”
1.55”
UP
3.40”
2.35”
3.30”
Call
VIKING©
To open the speaker box, remove the
two screws from the cover.
Mount back panel to a wall, a single
gang box or a 4”x4” junction box with
the arrow pointing up.
Note: For outdoor applications apply a bead of caulk between back panel and wall.
Attach the cover to the base with
the two included screws as
shown.
C. Wiring the W-1000 and W-1000-EWP
Rear View of the W-1000/W-1000-EWP
Important: Do NOT install a W-1000 or W-2000A on a
telephone line without a C-1000A Controller (Fax Back
Document 155).
(Spade connector
IMPORTANT:
Electronic
devices are susceptible to
lightning and power station electrical
surges from both the AC outlet and
the telephone line. It is recommended that a surge protector be
installed to protect against such
surges. Contact Panamax at (800)
472-5555 or Electronic Specialists
Inc. at (800) 225-4876.
included)
C-1000A Controller
VIKING ©
MODEL C-1000A
Single Line
Phone
POWER
O
13.8V AC
VIKING
ELECTRONICS
HUDSON, WI 54016
1
LINE IN
PHONES
2
3
4
5
6
7
8
DOOR
STRIKE 2
DOOR
BOX
O 2
DOOR
BOX
O 1
DOOR BOX
O
POWER
O
DOOR
STRIKE 1
AUX. CONTA
T CT
OUTPUT
DOOR ENTRY/P
R PAGING
CONTROLLER
** Earth
Ground
(optional)
Unused
PABX/KSU
Trunk Input
* Gel-filled butt
connectors
(EWP only)
9 10 11 12
STA
TATUS
Line
Output
13.8V AC
Power
Input
Red
or
C.O.
Line
!
Gel-filled butt
connectors
120V AC
(EWP only)
Green
* Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26 guage wire with a maximum insulation diameter of 0.082 inches. Do not
strip wires prior to terminating.
Multi-Line
Phone
** Note: To increase surge protection, loosen the PCB mounting screw labeled
ed) from the mounting screw to Earth Ground (grounding rod, water pipe, etc.)
(as shown above) and fasten a wire with spade terminal (includ-
D. Wiring the W-2000A and W-2000A-EWP
Rear View of the W-2000A/W-2000A-EWP
Important: Do NOT install a W-1000 or W-2000A on a
telephone line without a C-1000A Controller (Fax Back
Document 155).
(Spade connector
included)
C-1000A Controller
VIKING ©
MODEL C-1000A
Single Line
Phone
POWER
O
13.8V AC
VIKING
ELECTRONICS
HUDSON, WI 54016
1
LINE IN
PHONES
2
3
4
5
6
7
8
DOOR
STRIKE 2
DOOR
BOX
O 2
DOOR BOX
O
POWER
O
DOOR
BOX
O 1
DOOR
STRIKE 1
AUX. CONTA
T CT
OUTPUT
DOOR ENTRY/P
R PAGING
CONTROLLER
** Earth
Ground
(optional)
Unused
PABX/KSU
Trunk Input
* Gel-filled butt
connectors
(EWP only)
9 10 11 12
STA
TATUS
Line
Output
13.8V AC
Power
Input
Gel-filled butt
connectors 120V AC
(EWP only)
Red
or
C.O.
Line
Multi-Line
Phone
Green
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both
the AC outlet and the telephone line. It is recommended that a surge protector be installed to protect
against such surges. Contact Panamax at (800) 472-5555 or Electronic Specialists Inc. at (800) 225-4876.
!
* Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26 guage wire with a maximum insulation diameter of 0.082 inches. Do not strip wires prior to terminating.
** Note: To increase surge protection, loosen the PCB mounting screw labeled
ed) from the mounting screw to Earth Ground (grounding rod, water pipe, etc.)
(as shown above) and fasten a wire with spade terminal (includ-
Programming
Rear View of the
W-1000/W-1000-EWP/W-2000A/W-2000A-EWP
W-1000-EWP/
W-2000A-EWP
W-1000/W-2000A
-or-
Microphone Volume
(see section A)
DIP
Switches
ON
1 2
OFF ON
W-1000-EWP/
W-2000A-EWP
W-1000/W-2000A
-or-
Speaker Volume
(see section B)
Note: Pots are shown in factory default settings.
A. Microphone Volume
In certain noisy locations (background traffic, machinery or wind), the microphone volume may need to be decreased.
A symptom of this is one-way talk path, in which the distant party cannot be heard over the speaker. A “MIC VOL”
adjustment is provided on the W-1000/2000A for increasing or decreasing the microphone volume. Notes: If the microphone volume is set too high or too low, one-way talk path may occur. For extremely noisy environments, use the W3000 in the “PUSH to TALK” mode.
Need More Information on W-3000?
?
B. Speaker Volume
Call (715) 386-4345 and select 180.
The SPKR VOL pot can be adjusted to increase or decrease the speaker volume
to the level desired as shown above.
C. Maximum Number of Rings
The maximum number of rings can be adjusted using the DIP switches. Use the
chart at the right to adjust the maximum number of rings.
Sw 1
Sw 2
Maximum Rings
OFF
OFF
2 Ring
ON
OFF
3 Rings
OFF
ON
10 Rings
ON
ON
30 Rings
Operation
In the idle state, the W-1000 or W-2000A provides 24V DC talk battery. When the “Call” button is pressed, the W-1000 or
W-2000A generates a standard ring cadence (approximately 1 second ON and 3 seconds OFF) that is adjustable to 2, 3,
10 or 30 rings. When the call is answered, ringing will stop automatically and the calling party can converse handsfree (similar to a speakerphone) with the called party. The talk path will be maintained until the called party (inside phone) hangs up.
Related Products
C-1000A Door Entry Controller
The C-1000A Controller dramatically expands the potential installation sites for many peripherals
such as doorboxes and paging amplifiers. Doorboxes and paging amplifiers can now be used on single line, residential or home office applications as well as on fully loaded systems, because they are
no longer limited to installation on unused trunk ports. The C-1000A allows single line phones or
phone systems to share a phone line with one or two doorboxes or paging amplifiers. In addition, the
C-1000A provides two Touch Tone controlled relays to
Need More Information on the C-1000A?
?
Call (715) 386-4345 and select 155.
operate door strikes or gate openers.
RC-2A Remote Touch Tone Controller
The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone.
The controller is designed to be installed either locally or remotely. For local installations the RC2A can be installed in series on any analog communications path, such as analog C.O. lines, analog PABX/KSU stations or Viking’s W-Series Doorboxes. and will passively monitor for Touch
Tone commands. For off-premise applications, the RC-2A will answer analog C.O. lines or
PABX/KSU stations after a selectable ring delay. A field programmable access code can also be
programmed to prevent unauthorized usage. The
Need More Information on the RC-2A?
?
Call (715) 386-4345 and select 160.
RC-2A will then allow remote relay operation.
LDB-3 Advanced Ring/Loop Detector
The LDB-3 Advanced Loop Detector monitors an analog phone line for ringing and/or an off hook condition. A builtin relay can be activated when either of these conditions are detected. This is ideal for monitoring line status or
for providing a visual indication of such.
The LDB-3 can be used with any W-Series doorbox to provide a dry contact closure when the button is pressed
on the doorbox and can be maintained while communicating with the doorbox if desired. This contact closure can
be used to trigger a security camera or activate a doorbell system. The LDB-3 comes complete with a 12 VDC
power adapter, and can also provide switched 12VDC .35 Amp output
Need More Information on the LDB-3?
?
Call (715) 386-4345 and select 409.
to power external lights, etc. during ringing and/or off-hook conditions.
Product Support Line...715.386.8666
Fax Back Line...715.386.4345
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 170
Printed in the U.S.A.
ZF301820 Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement