YOUR SOURCE FOR THE BEST TESTING AND MEASURING TOOLS Clamp Meter IR Thermometer Drop Proof Non-Contact Voltage Detector 1 Contents YOUR SOURCE FOR THE BEST TESTING AND MEASURING TOOLS If you are thinking about buying a new testing and measuring tools, look for the brand with a long-standing history of innovative tools, rugged capabilities, and sensible value. Look for Extech. Since 1970, Extech has been constantly redefining the testing and measuring market by pioneering bold new technologies in testers and meters. As the authorized distributor, PT Kawan Lama Sejahtera will give you the best service. Multi Meter Phase Rotation Tester Infra Red Thermometer Hygro Thermometer pH Meter 2 Megohm Meter Ground Resistance Tester Tachometer LCR Meter Clamp Meter Power Quality Clamp Meter Thermocouple Calibrator DO Meter Electrical Tester Conductivity Meter Light Meter Palm pH Meter Vibration Meter Voltage Insulation Tester Micro Ohm Meter Moisture Meter Humidity Recorder ORP Meter Osciloscope Power Quality & Harmonics Analyzer Gas Detector Video Inspection Environment Meter Refractometer DO Meter Kit www.kawanlamaonline.com electrical tool multimeter Non Contact Voltage Detector Most d Wante EX-048 EX-037 EX-158 MEASURE : • AC/DC VOLTAGE • AC/DC CURRENT • RESISTANCE • CAPACITANCE • FREQUENCY • TEMPERATURE MEASURE : • AC/DC VOLTAGE • AC/DC CURRENT • RESISTANCE • CAPACITANCE • FREQUENCY ELECTRICAL • FREQUENCY ELECTRONIC • TEMPERATURE • CONTINUITY • DUTY CYCLE MEASURE : • AC/DC VOLTAGE • AC/DC CURRENT • RESISTANCE • CAPACITANCE • FREQUENCY ELECTRICAL • FREQUENCY ELECTRONIC • TEMPERATURE • CONTINUITY • DUTY CYCLE Waterproof (IP67) rugged design for heavy duty use With CAT IV-600V safety rating for industrial applications. Full range multimeter functions with high resolution to 0.1μA/0.1mV and CAT IV-600V safety rating. • 4,000 count • 0.5% accuracy • Data hold and relative • 10A max current • 1000V input protection on all functions • Dual sensitivity frequency functions • Large backlit LCD • Diode open circuit voltage of 2.8V DC • Auto power off with disable feature • Complete with double molded test leads, magnetic hanging strap, type K bead wire temperature probe • 50,000 count (500,000 for DCV and Hz) backlit LCD display with bargraph • AC/DC current to 10A with 0.01μA resolution • High resolution to 1μV, 0.0001Hz, 0.01Ω, 0.01μA and 0.1° • 4 to 20mA, displayed as 0-100% for process current measurements • dBm measurements with 20 selectable impedances • Complete with test leads, Type K thermocouple probe (-22 to 572°F/ -30 to 300°C)(MM570A), protective holster with stand and 9V battery MN16A COMPACT DIGITAL MINI MULTI METERS Voltage Measurement Autoranging or manual ranging multi meters Affordable compact sized multi meters with type K temperature measurements. Temperature Measurement Data Logging Measurement For Professional use • Large easy to read digital display • Measure AC and DC voltage to 600V • DC current function to 10A • Thermocouple type K function for surface and air temperature measurements up to 750°C • Resistance tests with continuity and diode functions • Autoranging model with AC current, capacitance and frequency measurements • Convenient mini size with protective rubber holster and tilt stand • Data hold locks reading in the display • Includes protective rubber holster, two AAA batteries, test leads, and type K thermocouple probe EX505 HEAVY DUTY INDUSTRIAL MULTI METER Specifications MM570A MULTIMETER, MULTIMASTER 500,000 COUNT W/TEMP Range Type EX-048 EX-037 EX-158 Averaging/True RMS Averaging True RMS True RMS Display Counts 4,000 4,000 50,000/500,000 AC/DC Voltage 0.1mV to 600V 0.1mV to 1000V 50,001mV to 1000V AC/DC Current 0.1μA to 10A 0.1μA to 10A 0,01μA to 20A Basic Accuracy ±1.5% ±0.5% ±0.02% Resistance 0.1Ω to 40MΩ 0.1Ω to 40MΩ 0.01Ω to 50MΩ Capacitance 0.01nF to 100μF 0.01nF to 100μF 0.01nF to 9999μF Frequency 0.001Hz to 5MHz 0.001Hz to 10MHz 5Hz to 200kHz Temperature (Type K) -20 to 750°C -20 to 750°C -50 to 1000°C Duty Cycle - 0.1 to 99.9% 0.1% to 99.99% Continuity / Diode - Yes Yes Category Rating CAT III-600V CAT IV-600V CAT IV-600V Waterproof/ Dropproof - IP67 / 2 m - www.kawanlamaonline.com 3 electrical tool clamp meter Most d Wante IR Temperature Measurment ex-045 MA120 CLAMP METER WITH BUILT-IN AC VOLTAGE DETECTOR + FLASHLIGHT 200A mini clamp meters increase use safety by including a built-in voltage detector in the jaw tip. The user can now detect the presence of dangerous voltages before using the meter. 3Phase Current Measurment EX-047 MA620 600A TRUE RMS CLAMP METERS + NCV Integrated non-contact voltage detector To quickly check for the presence of live wires before testing. • True RMS for accurate readings of nonsinusoidal waveforms • Built-in non-contact voltage detector • Measures 200A AC Current up to 100mA resolution with LED alert • 18mm jaw opening; 300MCM cable size • 1.5” (40mm) jaw size for conductors up to • 2000 count LCD display 500MCM • Relative mode for capacitance zero and • Non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip offset adjustment • Measures Frequency up to 1kHz with 0.01Hz • Data hold, Min./Max., and auto power off • Complete with test leads, type K bead resolution wire temperature probe, 9V battery and • Data Hold (MA 120) • Autoranging with Auto Power Off carrying case • Overload protection for all ranges • Overrange and low battery indicators • Complete with two AAA batteries • Built-in white LED flashlight Voltage Detector Specifications 4 EX-038 EX840 1000A CLAMP METER + IR THERMOMETER Industrial clamp-on multimeter with CAT IV-600V safety rating Ideal for industrial applications. • Patented built-in non-contact IR thermometer design with laser pointer • True RMS current and voltage measurements • Peak hold captures inrush currents and transients • Diode open circuit voltage of 2.8V DC • Features include data hold and min./ max. and auto power off • Complete with CAT IV test leads, 9V battery, type K probe, pouch case, and professional test lead set Includes: Pouch case to store the meter, temperature probe, and test leads. The additional 8pc set Professional Test Leads are packaged separately. Industrial clamp-on multimeter with CAT IV-600V safety rating Ideal for industrial applications. Range Type EX-045 EX-047 EX-038 Averaging/True RMS Averaging True RMS True RMS Display Counts 2,000 6,000 4,000 Jaw Size 0.7” 1.5” 1.7” AC/DC Voltage - 1mV to 600V 0.1mV to 1000V AC/DC Current 0.1 ot 200A 0.01 to 600A (AC only) 0.1 to 1000A Basic ACA Accuracy ±3.0% ±2.8% ±2.5% Resistance - 0.1Ω to 60MΩ 0.1Ω to 40MΩ Capacitance - 0.01nF to 4mF 0.001nF to 40mF Frequency 0.01Hz to 1kHz 0.001Hz to 10kHz 1Hz to 4kHz Temperature (IR) - - -50 to 270°C Temperature (Type K) - -20 to 760°C -20 to 760°C Duty Cycle - 0.1 to 99.9% 0.1 to 99.9% Continuity / Diode - Yes Yes Category Rating CATIII-300V CAT III-600V CAT IV-600V www.kawanlamaonline.com electrical tool insulation and ground tester EX-096 380926 2000A AC/DC CLAMP METER Full range multimeter functions with high resolution to 0.1μA/0.1mV and CAT IV-600V safety rating. • Current measurements to 2000A through the clamp and 400mA via test leads • Rugged 2” (50mm) jaws accommodate one 2000MCM or two 500MCM cables • Features include DCA push button zero, relative measurements and data hold • Heavy duty ABS case with built-in stand and thumb control function switch • Complete with test leads and 9V battery For Professional use Specifications RANGE Averaging/True RMS True RMS Display Counts 5,000 Jaw Size 2” AC/DC Voltage 1mV to 1000V AC Current/DC Current 0.1 to 2000A Basic ACA Accuracy ±2% Resistance 0.1Ω to 40MΩ Capacitance 10pF to 50μF Frequency 0.001Hz to 100kHz Continuity / Diode Yes Category Rating CAT IV-600V Specifications RANGE Test Voltage 500V/1000V/2500V/5000V Insulation Resistance 6MΩ, 60MΩ, 600MΩ, 6GΩ, 60GΩ Accuracy ±2.5% AC/DC Voltage 0 to 600V (1%) Resistance 0 to 600Ω (1.5%) Continuity 50Ω Large jaw size for high current measurements EX-066 380396 DIGITAL HIGH VOLTAGE INSULATION TESTER Wide range measurement up to 5kV With insulation resistance to 60GΩ. • Large 6000 count display with bar graph and backlight • Polarization index measurement (PI) • Dielectric absorption ratio measurement (DAR) • Max./Min., peak and relative functions • 1 to 15 minute timer function for IR measurements • Indication of output voltage and discharge voltage • Auto-discharge function and voltage output warning function • Complete with test leads, 8 x C batteries, AC adaptor, and heavy duty carrying case Complete with Accessories for insulation Measurements EX-122 GRT300 4-WIRE EARTH GROUND RESISTANCE TESTER Includes all hard ware necessary to measure earth ground. • 4-wire, 3-wire, and 2-wire testing • Large dual line LCD • Autoranging • Automatic I (current) spike check • Automatic P (potential) spike check • Test hold function for easy operation • Automatic zero adjustment • AC earth voltage • Data hold and auto power off • Over range and low battery indication Specifications range Earth Ground Resistance Ranges 2Ω/20Ω/200Ω/2000Ω Basic Accuracy ±(2%rdg+3d) Resolution 0.01Ω/0.1Ω/1Ω/0.01kΩ Test Current / Frequency <2mA / 820Hz AC Earth Voltage / Frequency 0 to 300VAC / 40 to 500Hz Accuracy ±(2%rdg+3d) Power supply Eight 1.5V ‘AA’ Batteries Dimensions 9.8 x 7.8 x 4.3” (250 x 190 x 110mm) Weight 3.15lbs (1430g) (batteries included) Complete with test leads with alligator clips, 4 auxiliary earth bars, hard carrying case, and eight 1.5V AA batteries www.kawanlamaonline.com 5 electrical tool oscilloscope and electrical analyzers EX-222 MS460 60 MHZ 2-CHANNEL DIGITAL OSCILLOSCOPE Makes viewing multiple waveforms easy. • 60MHz bandwidth • Auto-set function optimizes the position, range, timebase, and triggering • XY mode • Five automatic measurements: frequency, cycle, average, peak to peak, RMS • Waveform math: add, subtract, multiply, and divide • Average mode for smoothing waveforms • Persistence mode for observing dynamic signals • Autoscale automatically configures trigger mode, voltage division and time scale according to type, amplitude and frequency of a signal • 6-Digit frequency counter (2Hz to 60MHz) • Square wave output (5V, 1kHz) for probe adjustment • Store and recall up to 4 waveform screens and setups • USB interface and software for transferring waveforms and data A B C Specifications range Oscilloscope Functions Bandwidth 60MHz Real time sample rate 250MS/s Risetime 17.5ns Channels 2 Record Length 6K points per channel Glitch Capture 50ns Vertical Sensitivity 5mV to 5V/div Vertical Resolution 8 bits Timebase Range 5ns to 5s/div Sample Mode Sample, Average, Peak Detect Trigger Modes Free Run, Single Shot, Edge, Video Trigger Source CH1, CH2 Trigger Coupling AC, DC Input Impedance 1MΩ/20pF Max Input Voltage 400V (peak) Cursor Measurement Voltage and time True RMS MultiMeter Functions ex-156 PQ3350-3 3-PHASE POWER QUALITY & HARMONICS ANALYZER Power Measurements and Analysis + Datalogging. • Large backlighting LCD displays up to 35 parameters in one screen • Clamp-on true RMS power measurements with on-screen harmonics display • Simultaneous display of harmonics a nd waveform • Display of waveform with peak values (1024 samples/period) • Analysis of total harmonic distortion (THD-F) • Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000) • Graphic phase diagram with 3-phase system parameters • 3-phase voltage or current unbalanced ratio (VUR, VIR) and unbalanced factor (d0%, d2%) • Calculated unbalanced current through neutral line (In) • Capture 28 transient events (including dip, swell and outage) with programmable threshold (%) • Optically isolated USB interface with software to download waveforms, power parameters and harmonics AC/DC Voltage 400mV, 4V, 40V, 400V AC/DC Current 40mA, 300mA, 20A Resistance 400Ω, 4kΩ, 40kΩ, 400kΩ, 40MΩ Capacitance 51.2nF to 100μF Diode and Continuity Yes PC Interface USB cable Power Supply 6 hours Li-ion rechargeable battery; AC Adaptor/Charger Specifications Basic Accuracy ACV (True rms) 600V ±0.5% AC Current 1200A ±0.5% Active Power (kW) 9.999MW ±1% Apparent Power (kVA) 9999kVA Reactive Power (kVAR) 9999kVAR Power Factor 0.0 to +1.00 ±1.5% Frequency 45-65Hz 0.1Hz Phase -180.0°~ 0°~ +180.0° ±1% Harmonics 1 to 99 ±2% Crest Factor 1.00 to 99.99 ±5% Active Power Energy (kWh) 0mWh to 999,999kWh Reactive Power Energy (kVARh) 0.0kVARh to 1000MWh Datalogging 52428 records (single phase)/17476 records (3 phase) Meter Display Harmonics Analysis 6 range Power Analysis Phase Analysis Internal Menu www.kawanlamaonline.com environmental tool Moisture meter and THERMO HYGRO METER EX-024 EX-022 • Temperature range: -10 to 60°C (1°C) • Humidity range: 10 to 99% (± 4%) • Large, easy-to-read triple LCD displays • %RH audible and visual alarms, with adjustable set points, alert when humidity exceeds set limit • Probe clips onto meter or extends on 18”(457mm) cable • Complete with built-in stand, wall mount bracket, remote sensor and two AAA batteries • Dimensions 10.9 x 4.9 x 2cm • Humidity range: 10 to 85% (± 6%) • Temperature range : -10 to 60°C (1°C) • Attractive design for desktop or wall mounting • Switchable °C or °F temperature display • 12/24 hour clock with alarm function • Complete with built-in tilt stand, wall mounting bracket and AAA battery • Dimension 10.9 x 7.1 x 2cm 445815 HYGRO-THERMOMETER HUMIDITY ALERT W/DEW POINT Warning of high or low humidity conditions. Most d Wante Humidity production monitoring Monitoring humidity electronic warehouse EX-116 445706 HYGRO-THERMOMETER ALARM CLOCK Large digit display clock Ideal for desktop or wall mount. • Temperature range: -5 to 45°C (1°C) • Humidity range: 20% to 90% RH (± 5%) • Calendar displays day, date and month • Audible alarm clock with snooze function • Measures temperature and humidity plus min./max. function • Complete with desktop stand and two AA batteries • Dimensions 22.1 x 30 x 2.4cm Display clock and humidity room EX-050 MO260 COMBINATION PIN/PINLESS MOISTURE METER. • %WME (wood moisture equivalent pin moisture reading (6 to 94.8% WME) • Relative pinless moisture reading for non-invasive measurement (0 to 99.9%) • Digital LCD readout with backlighting feature and tri-color LED bargraph • Pinless measurement depth to 0.75” (22mm) below the surface • Electro-magnetic sensing technology • Built-in calibration check • Replaceable measurement electrode pins • Cap protects pins during storage and can be snapped on to the side of the housing during use • Complete with 9V battery, replacement pins, protective cap, and pouch case Measures % of moisture in sheet rock and other building materials using direct pin method. Protective cap snaps onto the side of the housing during use. www.kawanlamaonline.com 445702 HYGRO-THERMOMETER CLOCK Triple display with clock, temperature and humidity With user settable clock alarm. Humidity Measurement EX-14 421509 Dual input datalogging thermometer w/Alarm Built-in PC interface with internal memory stores up to 16 data sets, 1024 maximum capacity With Programmable HI/Lo audible alarm • Seven Thermocouple type selections: K, J, T, E, R, S, N • Large backlit LCD with two secondary displays for simultaneous T1, T2, T1-T2, Time and advanced readouts • T/C offset adjustment • REC, MAX, MIN, MAX-MIN, AVG and °C/°F switchable • Data Hold and Relative Function • Built-In bi-directional RS-232 PC Interface • Real time clock with calender • Selectable auto power off function, disable capability • Complete with two Type-K bead wire temperature probes (-4 to 482°F /-20 to 250°C), Windows 95/98/ ME/NT/2000/XP compatible software, RS-232 cable, protective holster and 9V battery. EX-085 RH520A HUMIDITY + TEMPERATURE CHART RECORDER Best value graphical datalogger in the market User friendly, easy to set up and operate. • Simultaneous numerical and graphical display • Measures humidity (10 to 95%RH) and temperature (-28°C to 60°C) plus included LabVIEW™ based software calculates and graphs dew point, wet bulb, and GPP (grains per pound) • Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis • LCD indicates percentage of memory remaining • Replaceable probe does not require recalibration • Detachable probe extends up to 1 meter for measurements in closed environments • Desk or wall mount • Complete with built-in stand, detachable probe with 3ft (1m) cable, RS232 cable, RS-232 To USB Adaptor, LabView-based PC software, 100240VAC 50/60Hz adaptor, and three AA batteries 7 ENVIRONMENTAL TOOL INFRARED THERMOMETER Panel Measurment EX-009 Most d Wante 42509 IR THERMOMETER WITH COLOR ALERT Programmable high/low alarm With fast two color display and audible alarm. MCB Measurment • Great for processes that require temperature control and monitoring • Blue backlit dual LCD display changes to red backlit when reading exceeds high or low set points • Exclusive 150 millisecond instantaneous response for capturing spikes in temperature • Max mode captures and holds rapidly changing temperatures • Adjustable emissivity increases measurement accuracy for different surfaces • Complete with case and 9V battery Wireless Measurment Data Logging EX-107 42512 DUAL LASER INFRARED THERMOMETERS Indicates ideal measuring distance. • Dual laser for accurate target • White backlit dual LCD display • Fast 0.15 second response time with max. display • Adjustable emissivity increases measurement accuracy for different surface • Adjustable high/low set points with audible alarm alerts user when temperature exceeds the programmed set points • Lock function for continuous readings • Double molded housing • Complete with pouch case and 9V battery EX-126 42570 DUAL LASER INFRARED THERMOMETER High IR temperature range Fast 100mS response with highest accuracy. • Dual laser targeting indicates ideal measuring distance when two laser points converge to 1” target spot • Lock function for continuous readings • White backlit multifunction LCD display with bargraph • Fast 100 millisecond response time • Max./min./AVG/DIF feature displays highest, lowest, average, and max. minus min. values • Adjustable high/low set points with audible alarm alerts user when temperature exceeds the programmed set points • USB interface includes software • Tripod mounting feature • Complete with type K temperature probe, USB cable and software, tripod, carrying case and 9V battery The distance-to-spot ratio (D:S) is the ratio of the distance to the object and the diameter of the temperature measurement area. For instance if the D:S ratio is 12:1, measurement of an object 12 inches (30 cm) away will average the temperature over a 1-inch-diameter (25 mm) area. The sensor may have an adjustable emissivity setting, which can be set to measure the temperature of reflective (shiny) and non-reflective surfaces Specifications RANGE Type EX-009 EX-107 EX-126 Range -20 to 510°C -50 to 1000°C -50 to 2200°C Basic Accuracy ±1% ±1% ±1% Max. Resolution 0.1°C 0.1°C 0.1°C Emissivity 0.10 to 1.00 Adjustable 0.10 to 1.00 Adjustable 0.10 to 1.00 Adjustable Field of View (Distance to Target) 12:1 30:1 50:1 Type K Range - - -50 to 1370°C Memory - - Manually Store/Recall 100 readings 8 www.kawanlamaonline.com ENVIRONMENTAL TOOL INFRARED THERMOMETER, voltage detector, laser distance meter, • Air temperature and relative humidity measurement VIR50 DIGITAL INFRARED VIDEO THERMOMETER • Adjustable emissivity increases 2.2” color TFT LCD and built-in 640 x 480 camera measurement accuracy for different with a microSD card for capturing images (JPEG) surfaces and video (3GP) for viewing on your PC. • Adjustable high/low set points with audible alarm alerts user when temperature • Dual laser indicates ideal measuring distance exceeds the programmed set points where the two laser points converge to a • Max./Min./AVG/DIF functions 1” target spot • Trigger lock function for continuous • Fast 150 millisecond response time readings • Color LED bargraph for viewing trends • USB interface • Type K thermocouple input • Complete with microSD card, general purpose type K bead wire probe, USB cable, rechargeable 3.7V battery, and carrying case EX-127 Upload images and videos to a PC or laptop for further analysis or use for report documentation. Large 2.2” color video LCD displays measurement area with temperature/humidity, min./max./avg, date, and time stamp Most Wanted Specifications RANGE Range -50 to 2200°C Basic Accuracy ±2% Max. Resolution 0.1°C Emissivity 0.1 to 1 Adjustable Field of View (Distance to Target) 50:1 Type K Range -50 to 1370°C Air Temperature Range 0 to 50°C Relative Humidity 0 to 100% RH Memory MicroSD Specifications RANGE Measurement Range 0.5 to 50 m Accuracy 1.5mm Resolution 0.001m Length Add Calculation 99.99m Area Calculation 999.99m² Volume Calculation 999.99m³ EX-011 DT300 LASER DISTANCE METER Laser measurement accurate to 0.06 inches With historical storage that recalls the previous 20 records. • Indirect measurement using Pythagorean theorem • Continuous measurement function with min./max. distance tracking updates every 0.5 seconds • Addition/subtraction • Front or rear edge reference • Low battery indicator • Double molded housing (IP54) • Auto power off • Complete with carrying case and two AAA batteries EX-109 DV40 NCV VOLTAGE DETECTOR + IR THERMOMETER Built-in IR thermometer. • Detects AC voltage from 50 to 1000V • Built-in infrared thermometer measures temperature from -30 to 230°C with 0.1° resolution • LCD displays temperature with selectable °F/°C internal switch • Fixed 0.95 emissivity covers 90% of surface applications • 1:1 distance to target ratio • NCV probe with integrated indicator light • Tip fits into outlets or against wire insulation • Rugged double molded housing • Complete with pocket clip and 3 LR44 batteries More Simple More Reliable www.kawanlamaonline.com 9 ENVIRONMENTAL TOOL environmental meter & anemometer EX-103 EN300 HYGRO-THERMO-ANEMOMETER-LIGHTSOUND METER Rugged 5-in-1 environmental meter Measures humidity, temperature, air velocity, light and sound. • Auto-rotating display depending on function • Built-in low friction vane wheel improves accuracy • Thin-film capacitance humidity sensor for fast response • Thermistor for ambient temperature measurements • Utilizes precision photo diode and correction filter • Sound level measurement meets IEC 61672 class2 • Tripod mount • Complete with six 1.5V AAA batteries EX-173 AN100 ANEMOMETER CFM/CMM Large display of airflow or air velocity. • Simultaneous display of ambient temperature and air flow or air velocity • Up to 8 easy to set area dimensions (ft² or cm²) are stored in the meter’s internal memory • Super large LCD Backlit Display • 3% velocity accuracy via low friction 2.83”D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable • Data Hold and MIN/MAX • Auto Power off • Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, protective rubber holster, and carrying case AN100 used in HVAC applications measuring airflow from from heating vents EX-101 SDL350 HOT WIRE CFM THERMO-ANEMOMETER DATALOGGER Records data on an SD card in Excel® format for easy transfer to a PC for analysis. • Air velocity/air flow meter with telescoping probe designed to fit into HVAC ducts and other small openings • Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC • Adjustable data sampling rate: 1 to 3600 sec • Stores 99 readings manually and 20M readings via 2G SD card • Record/Recall min., max. readings • Data hold plus auto power off with disable function • Built-in PC interface • Complete with 6 x AA batteries, SD card, 3.1ft (95cm) fully extended telescoping probe with 3.9ft (120cm) cable, and hard carrying case 10 Specifications range resolution ft/min 80 to 5910 ft/min 1ft/min m/s 0.4 to 30m/s 0.1m/s km/h 1.4 to 108km/h 0.1km/h MPH 0.9 to 67MPH 0.1MPH knots 0.8 to 58.3 knots 0.1knots Foot Candles 0 to 1860Fc 0.1Fc Lux 0 to 20,000Lux 1Lux Temperature (thermistor) 0 to 50°C 0.1°C % Relative Humidity 10 to 95%RH 0.1%RH Temperature (Type K) -100°C to 1300°C 0.1°C Sound 35 to 130dB 0.1dB Frequency 31.5 to 8,000Hz Weighting / Response A weighting/fast response Air Velocity Light Specifications RANGE Air Velocity (Max. Res.) ft/min 80 to 5900 (1) m/sec 0.4 to 30.00 (0.01) km/h 1.4 to 108.0 (0.1) MPH 0.9 to 67.0 (0.1) knots 0.8 to 58.0 (0.1) Temperature (Max Res.) 14 to 140°F/ -10 to 60°C (0.1˚) Air Flow (CFM = ft3/min) 0 to 9999CFM (1) Air Flow (CMM = m3/min) 0 to 9999CMM (1) Basic Accuracy ±3%rdg; ±2°F (±1˚C) PC Interface - Datalogger - CE approved Yes Dimensions/Weight 7x2.9x1.3” (178x74x33mm) 700g Specifications RANGE Air Velocity m/s 0.2 to 25m/s ft/min 40 to 3940ft/min km/h 0.7 to 72km/h MPH 0.5 to 45MPH knots 1 to 31knots CFM (feet3/min) 0 to 1,907,000 CFM CMM (meter3/min) 0 to 54,000 CMM Temperature 32 to 122°F (0 to 50°C) Type K Temperature -148 to 2372°F (-100 to 1300°C) Type J Temperature -148 to 2192°F (-100 to 1200°C) Memory 20 Million data records (2G SD card) Dimensions 7.2 x 2.9 x 1.9” (182 x 73 x 47.5mm) Weight 23.1oz (655g) www.kawanlamaonline.com ENVIRONMENTAL TOOL LUX METER and sound meter EX-033 EA30 LIGHT METER, WIDE RANGING EASY VIEW 30 SERIES Choice of models for high intensity measurements Up to 400,000 Lux and 40,000 Foot candles. • Compact and rugged design features large display • Data hold freezes reading on display • MIN/MAX readings • Zero function • Cosine and color corrected measurements • Low battery and overrange indication • Auto power off to save battery life • Utilizes precision silicon photodiode sensor with 3ft coiled cable for easy storage • Complete with built-in stand, remote sensor with protective cover, protective rubber holster, and 6 AAA batteries Specifications RANGE Lux Foot candles 40, 400, 4000, 40000, 400000Lux 40, 400, 4000, 40000Fc Resolution 0.01 Basic Accuracy ±3%rdg + 0.5%FS Dimension 5.9 x 2.8 x 1.4” (150 x 72 x 33mm) Weight 8.3oz (235g) High resolution for low level measurments in places like parking lots, stairwells and ATM machines EX-010 407732 SOUND LEVEL METER WITH BACKLIT DISPLAY Two range meter With backlit LCD display. • High accuracy meets ANSI and IEC 651 Type 2 standards • High and low measuring ranges • Data hold and max. hold functions • Backlit display to view in dimly lit area • Complete with microphone wind screen and 9V battery Specifications range Range Low: 35 to 100dB High: 65 to 130dB Basic Accuracy ±1.5dB Weighting (A & C) Yes Response Time (Fast/Slow) Yes Datalogging No PC Interface No EX-074 HD600 DATA LOGGING SOUND LEVEL METER Meets ANSI and IEC61672-1 Type 2 standards. • Three ranges from 30 to 130dB • Datalogging capability up to 20,000 records • Capture up to 10 readings/sec when connected to a PC • Records readings with real date and time stamp • Min./max. and data hold functions • Heavy duty rugged double molded housing • USB port includes software • Auto power off with disable capability • Includes Windows® compatible software, USB cable, wind cover, tripod, hard carrying case, AC adaptor, and 9V battery Meets new IEC 61672-1 Class 2 accuracy standard for OSHA and other local and national noise ordinances Meter and accessories are packaged in a rugged hard carrying case for added protection EX-234 SL355 Personal Noise Dosimeter Low cost, lightweight and easy to use For measuring total sound exposure over an 8-hour period Personal Noise Measurement www.kawanlamaonline.com • Perform OSHA and IEC Noise accumulation surveys • One user-defined measurement setup • Adjustable Criterion Level, Exchange Rate and Threshold • Applications include personal accumulated noise exposure measurement, Workplace noise assessment, OSHA and other regulatory agency compliances • Measures frequency weighted noise exposure and peak sound level simultaneously USB port includes PC software included Specifications range Range 30 to 130 dB Basic Accuracy +1.4dB Weighting (A & C) Yes Response Time (Fast/Slow) Yes Datalogging 20,000 points PC Interface USB • Datalogs up to 12.000 readings when used as a sound level meter with sampling times between 1sec and 1hr • In sound level mode, meter displays sound level, time-average sound level (Leq), peak, and sound exposure level (SEL) • Optional 94/114dB calibrator to perform “before” and “after” calibration checks per ANSI standards • Stores up to 20 dosimeter surveys. Data includes Start/Stop Time, %Dose, %Dose projected for an 8 hour period and peak level when used in the Dosimeter mode • USB interface with Windows XP/Vista/7 compatible software to control setup and retrieve stored events or analyze real time measurments • Includes belt clip, clip-on 0.5” microphone with 2.6ft (0.8m) cable, 3 AAA batteries, mini screwdriver, software, USB cable and carrying case 11 ENVIRONMENTAL TOOL vibration meter, sound level meter and tachometer EX-088 EX-119 461880 VIBRATION METER + LASER COMBINATION TACHOMETER Multifunctional meter Measures acceleration, velocity and displacement plus RPM and linear surface speed. SDL800 VIBRATION METER/DATALOGGER Saves data on an SD card in Excel® format for easy transfer to a PC for analysis. • Remote vibration sensor with magnetic adapter on 47.2”(1.2m) cable • Wide frequency range of 10Hz to 1kHz • RMS, peak value or max. hold measurement modes • Adjustable data sampling rate: 1 to 3600 seconds • Offset adjustment used for zero function to make relative measurements • Stores 99 readings manually and 20M readings via 2G SD card • Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case • Unique large LCD with characters on display reverse direction • Windows® 95/98/NT/2000/XP compatible software (included) allows captured readings to be downloaded to your PC for further analysis • Complete with remote vibration sensor, magnetic mount, wheels for linear surface speed or RPM (cone tip and flat tip), reflective tape, 4 AA batteries, software with cable, and hard carrying case Vibration Meter Features: • Remote vibration sensor with magnetic adapter on 39”(1m) cable • Wide frequency range of 10Hz to 1kHz • RMS or peak value measurement modes • Manual/auto store/recall up to 1000 readings Tachometer Features: • Uses a laser for greater distance non-contact measurements up to 4.9ft (1.5m) • Stores last, max., and min. readings with tachometer RPM measurement Test vibration levels on motors, bearing, fans, pumps, rotating machinery and more. EX-054 EX-026 • Built-in IR thermometer with laser measures remote surface temperature on motors and rotating parts • Fixed 0.95 emissivity, 6:1 distance to target ratio • Non-contact photo tachometer uses a laser for greater measuring distance up to 6.5ft (2m) • Contact tachometer for RPM and surface speed measurements • Memory stores min./max./last • Complete with tips/wheel, four 1.5V AA batteries, reflective tape, and carrying case • Make non-contact RPM measurements of rotating objects • Use reflective tape on object to be measured and point the integral laser • Counter function count s up to 99,999 revolutions • Rugged double molded housing for better grip • Complete with 9V battery and reflective tape COMBINATION TACHOMETER + IR THERMOMETER Photo/contact tachometer includes a non-contact IR thermometer. Non-Contact RPM measurement 461920 MINI LASER PHOTO TACHOMETER COUNTER Laser light source Used for greater accuracy and longer measuring distances. Contact RPM measurement Non-Contact RPM measurement Specifications range Specifications range RPM Range Photo: 10 to 99,999 Contact: 0.5 to 20,000 RPM Range 2 to 99,999rpm m/min - m/min 0.05 to 1999.9 (Contact) Count Range 1 to 99,999rev Count Range 1 to 99,999rev Target Distance 500mm Target Distance 2000mm Basic Accuracy ±0.05% Basic Accuracy ±0.05% Resolution 0.1rpm, 1rev Resolution 0.1rpm Memory Min/Max/Last Memory - Temperature (IR) - Temperature (IR) -20 to 315°C 12 www.kawanlamaonline.com ENVIRONMENTAL TOOL VIDEO INSPECTION CAMERA EX-084 HDV640 VIDEO BORESCOPE/WIRELESS INSPECTION CAMERA High definition articulating VideoScope EasyView™ Light Meters 6mm diameter camera with 320° articulating tip for best viewing angle Easy one-hand operation of the articulating camera tip facilitates viewing in obstructed areas where standard camera tips cannot access. Images and videos are viewed on the large high resolution color display and can be stored in SD memory card (included). • 6mm diameter camera head with 1m semi-rigid cable retains configured shape and 320° camera probe rotation • Mini, high-resolution water-proof (IP57) camera head • Rugged water and drop proof housing (IP67/2m) • Non-slip ergonomic handles for ambidextrous use • SD memory card included to store >14,600 images • Video recording (up to 4 hours) with voice annotation • AV output for viewing images and video directly on a monitor • Video and images can be transferred to a PC via the SD card or USB output Specifications range Camera Articulating 320° w/Light Wired & Wireless Controller Minimum Focus Distance 2.36" (60mm); macro: 0.59” (15mm) Field of View 65° Shaft Diameter 0.24” (6mm) Working Length 39” (1m) Camera Tip Bending 320° (160° left, 160° right) Borescope Sound record LCD Screen Type 5.7” color TFT Pixels 640 x 480 (High Definition) SD Card 1GB (included) Operating 4 hours Water & Drop Proof EX-005 BR250 VIDEO BORESCOPE/WIRELESS INSPECTION CAMERA 9mm camera diameter and 3.5” Color TFT LCD wireless monitor with optional wireless USB video receiver (BRD10) to stream live video to your PC and over your VOIP (Voice Over Internet Protocol) connection. • Detachable wireless color display can be viewed from a remote location • 2GB micro SD memory card (included) for capturing images (JPEG) or video (AVI) for viewing on your PC • Captured video and still images with date/time stamp can be played back on the wireless monitor or your PC • Mini water-proof (IP67) 9mm camera head for high resolution viewing • Four bright LED lamps with dimmer to illuminate viewed object Complete with 4 AA batteries, rechargeable display battery, microSD memory card with SD adaptor, USB cable, extension tools (mirror, hook, magnet) video interconnect cable, AC adaptor (100-240V, 50/60Hz), magnetic base satnd and hard case. Specifications Range Camera Pixels 712 x 486 (NTSC) Transmission Frequency 2.4GHz Transmission Range 32ft (10m) unobstructed view Viewing Direction Viewing Angle 45° Focus Distance from Object 5.9” to 9.8” (15 to 25cm) Shaft Diameter 9mm Working Length 36” (0.9m) Minimum Bend Radius 2.36” (60mm) Handle Dimensions 7.3x5.7x1.6” (186x145x41mm) www.kawanlamaonline.com Detacheable wireless 3.5" color TFT LCD display can be viewed from a remote location up to 32ft (10m) from the measurement point. Ideal Applications: • Water Restoration • HVAC and Refrigeration • Electrical inspection • Automotive • Pest Control 13 ENVIRONMENTAL TOOL coating thickness, refractometer, manometer EX-213 CG-204 Coating Thickness Tester Dual Technology provides automatic recognition For ferrous and non-ferrous substrates • Automatic substrate recognition • Magnetic induction for ferrous substrates • Eddy current measurment for non-ferrous substrates • Easy- to use menu system • Two measuring modes: Single and Continuous • Two working modes: Direct and Group • Memory stores 400 readings: 80 Direct and 320 Group • User-programmable high/low alarms • Min/Max/Average • One or two point calibration • USB interface includes software • Complete with two AAA batteries, USB cable, Software, Calibration Iron, Calibration Alumunium, Precision Standards and pouch case. Measuring the thickness of automotive paint ex-051 RF41 BATTERY COOLANT REFRACTOMETER -50 TO 0˚C Measure the concentration of sugar, salt, lubricants, antifreeze, cutting fluids & more Available with or without automatic temperature compensation. • Easy to operate refractometers provide accurate and repeatable measurements on easy to read scales • Automatic temperature compensation models available for sugar, salt, lubricants, cutting fluids, and antifreeze • Requires only 2 or 3 drops of solution • Complete with case, calibration screwdriver, and calibration solution complete with six AA batteries and calibration cable with spade lug terminals Specifications RF-41 scale view through eyepiece Specifications Resolution Accuracy -50 to 0°C Propylene Glycol freeze point 1°C ±2% -50 to 0°C Ethylene Glycol freeze point 1°C ±2% 1.15 to 1.30 Specific Gravity of Battery Acid 0.01 - Range Resolution Accuracy psi 0.7252psi 0.0001psi ±0.3%FS mbar 50.00mbar 0.01mbar ±0.3%FS inH²O mmH²O 20.07inH²O 509.8mmH²O 0.01inH²O 0.01mmH²O ±0.3%FS Pa 5000Pa 1Pa ±0.3%FS Repeatability ±0.2% (Max. ±0.5%FS) Linearity/Hysteresis ±0.29FS Maximum Pressure 10psi Response Time 0.5s typical Pressure ±0.3%FS Air Velocity ft/min 200 to 15733 1 ±3% rdg m/s 1 to 80.00 0.01 ±3% rdg km/h 3.5 to 288.0 0.1 ±3% rdg HD350 PITOT TUBE + ANEMOMETER DIFF MANOMETER Pitot tube measures air velocity/airflow in difficult -to-reach or tight locations where a vane anemometer won’t fit. MPH 2.25 to 178.66 0.01 ±3% rdg knots 2.0 to 154.6 0.1 ±3% rdg • Simultaneous display of pressure, air velocity or air flow plus temperature • ±0.7252psi range • 5 selectable units of pressure measurement • Max/Min/Avg recording and relative time stamp • Zero function for offset correction or measurement • Store/recall up to 99 readings in each mode • Includes Windows® compatible software with cable, 9V battery, pitot tube with two 33.5” (85cm) connection hoses, and hard carrying case CFM 0 to 99,999 0.001 ±3% rdg CMM 0 to 99,999 0.001 ±3% rdg °F 32.0 to 122.0°F 0.1° ±2°F °C 0 to 50°C 0.1° ±1°C ex-145 14 Air Flow Temperature Dimensions/Weight Meter: 8.2 x 2.9 x 1.9" (210 x 75 x 50mm) / 12oz (340g) Pitot Tube: 15.4 x 7.7” (390 x 195mm) / 7.2oz (204g) www.kawanlamaonline.com water quality tester ph meter, conductivity meter, dissolve oxygen meter EX-012 EX-131 PH100 WATERPROOF EXSTIK® PH METER Flat surface electrode design Flat surface electrode measures pH in liquids, semisolids, and solids. Most d Wante PH300 WATERPROOF PH/MV/TEMPERATURE KIT 3-in-1 meter with lab-quality performance. • Waterproof housing (meets IP57) • Automatic calibration (4, 7, and 10pH) • Choice of 3 point calibration for better accuracy • Automatic temperature compensation • Memory stores up to 200 readings with series number, measured value and temperature • Complete with pH/mV/temperature electrode, protective rubber holster, pH calibration solutions (4, 7, and 10pH), 2 AA batteries, and hard carrying case • RENEW indicator tells you when it’s time to replace your electrode • CAL alert tells you it’s time to recalibrate • Memory records and recalls 15 data • Analog bargraph displayed on LCD • 1, 2 or 3 point calibration • Waterproof design (IP57) floats in water • Complete with flat surface pH electrode, sensor cap, sample cup with cap, four 3V CR-2032 button batteries, and 48” (1.2m) neckstrap EX-030 EX-035 EC500 waterproof ExStik® II pH/conductivity meter Combination rugged Flat Surface pH electrode Measures conductivity, TDS, Salinity, pH, and temperature using one electrode. DO600 WATERPROOF EXSTIK® II DISSOLVED OXYGEN METER/KIT Easy to replace screw on membrane cap For fast replacement and operation. Extension cable and weighted probe guard included with the Kit. • Analog bargraph indicates trends • Memory stores up to 25 labeled readings • Adjustable conductivity to TDS ratio from 0.4 to 1.0 • Waterproof to IP57 • EC500 meter includes electrode, sensor cap, sample cup with cap, four 3V CR-2032 batteries, and 48” neckstrap. PH Calibration • Oxygen level displayed as % Saturation or Concentration • Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments) • Adjustable Salinity Compensation from 0 to 50ppt • Analog bargraph indicates trends • Memory stores up to 25 data sets • Self calibration on power up • Waterproof to IP57 • DO600 meter includes DO electrode, sensor cap, spare membrane cap, electrolyte, four 3V CR-2032 batteries, and 48” (1.2m) neckstrap PH Measurement PH Concrete Measurement Specifications PH Soil Measurement Range Type EX-012 EX-131 EX-035 EX-030 pH 0.00 to 14.00pH -2 to 19pH 0.00 to 14.00pH - Conductivity - - 0 to 199.9μS, 200 to 1999μS, 2 to 19.99mS - TDS/Salinity - - 0 to 99.9ppm, 100 to 999ppm, 1 to 9.99ppt - mV - -1999mV to 1999mV - - DO Saturation/Concentration - - - 0 to 200% / 0 to 20 ppm Temperature -5 to 90°C 0 to 100°C -5 to 90°C 0 to 50°C Max Resolution 0.01pH, 0.1° 0.01pH, 1mV, 0.1° 0.1μS, 0.1ppm, 0.01pH, 0.1°C 0.1%, 0.01ppm, 0.1°C Basic Accuracy ±0.01pH, ±1°C ±2%FS, ±0.01pH, ±1°C ±2%FS, ±0.01pH, ±1°C ±2%FS, 0.4ppm, ±1°C www.kawanlamaonline.com 15 water quality tester PORTABLE DISSOLVED OXYGEN METER EX-083 DO700 PORTABLE DISSOLVED OXYGEN METER 9-in-1 meter with lab performance Dissolved oxygen concentration/saturation, pH, mV, conductivity, TDS, salinity, resistivity and temperature. For Professional use • Automatic salinity compensation and manual barometric pressure compensation for DO measurements • Waterproof housing (meets IP57) • One button pH calibration (4, 7, and 10pH) • Choice of 3 point pH calibration for better accuracy • One point conductivity calibration − automatically recognizes 8 calibration solutions • Automatic temperature compensation • Memory stores up to 400 readings • Auto power off saves battery life with disable function • Complete with dissolved oxygen probe with 3 membrane caps and DO internal fill solution (30mL), pH/mV/temperature electrode, polymer conductivity cell, pH calibration solutions (4, 7, and 10pH), • Conductivity calibration solution (1413μS), two AA batteries, and hard carrying case Specifications RANGE pH -2 to 19.99pH Conductivity 0 to 199.9mS TDS/Salinity 0 to 100g/L / 0 to 100ppt mV -1999mV to 1999mV DO Saturation/Concentration 0 to 200% / 0 to 40 ppm Temperature 0 to 100°C Resistivity 0 to 100MΩ cm Read to use complete kit includes all the necessary accessories stored in a hard carrying case for easy transportation. Ideal for field use. Large blue backlit dual LCD display with calibration and memory indicators
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021