Magellan MG-6060 Installation manual

Add to my manuals
52 Pages

advertisement

Magellan MG-6060 Installation manual | Manualzz
All-In-One Wireless Security System V1.0
Model # MG-6060
Programming Guide
Table of Contents
Things You Should Know ..................................... 4
About This Programming Guide...........................................
Conventions .........................................................................
Installer Code (Default: 0000 / 000000) ...............................
Maintenance Code (Default: 1111 / 111111) .......................
Master Code (Default: 1234 / 123456).................................
Decimal and Hexadecimal Values .......................................
4
4
4
5
5
6
Entering Programming Mode ............................... 7
Single Digit Data Entry Method............................................ 7
Feature Select Programming Method .................................. 7
Zone Programming................................................ 8
Wireless Transmitter Programming..................... 9
System Timers ..................................................... 10
Programmable Outputs (PGMs) ......................... 11
System Options ................................................... 12
Communicator Settings ...................................... 19
Remote Control Button Programming ............... 24
System Settings ................................................... 26
Installer Quick Keys ............................................. 26
Appendix 1: PGM Event Table ............................ 27
Appendix 2: Connection Diagrams..................... 33
Power Connections ...........................................................
Telephone Line Connections ............................................
PGM Connections .............................................................
Hardwire Zone Connections..............................................
X10 Transmitter Connections............................................
Connecting Magellan to WinLoad .....................................
Connecting to a UIP-256...................................................
Connecting a Paradox Memory Key (PMC-3)...................
Connecting the Radio Antenna .........................................
Mounting Magellan on the Wall.........................................
Tabletop Mounting ............................................................
33
35
37
38
39
40
41
42
43
44
45
Appendix 3: Ademco Contact ID
Report Code List .................................................. 46
Report Codes ....................................................... 21
Magellan
3
Things You Should Know
About This Programming Guide
This programming guide should be used in conjunction with the Magellan Reference & Installation Manual which can be downloaded from our Web
site at www.paradox.ca. Use this guide to record the settings programmed for this console.
Conventions
This symbol designates a warning or important information.
This symbol designates a suggestion or reminder.
This symbol designates a reference to another section, manual or guide.
This symbol designates a feature that can also be programmed in the Installer menu which can be accessed by pressing [menu] and then
entering your [INSTALLER CODE]. The icon will then be followed by the path or buttons that have to be pressed in order to access the feature
once in the Installer menu. For example:
J[4] J[6]
= Once in the Installer menu, press the [4] key and then press the [6] key to access the desired feature.
Refer to the Installer Menu Overview on the back cover for more information on accessing and using the Installer menu.
Installer Code (Default: 0000 / 000000)
The Installer code is used to enter programming mode (see Entering Programming Mode on page 7), which allows you to program all the features,
options and commands of the Magellan console except user codes. The Installer code can be 4 or 6 digits in length (see section [090] option [1] on
page 12) where each digit can be any value from 0 to 9. See section [181] on page 26 to change the default code.
4
Programming Guide
Maintenance Code (Default: 1111 / 111111)
The Maintenance code is similar to the Installer code. It can be used to enter programming mode (see Entering Programming Mode on page 7),
which allows you to program all the features, options and commands except for the Magellan console’s communication settings (sections [100] to
[154]) as well as any user codes. The Maintenance code can be 4 or 6 digits in length (see section [090] option [1] on page 12) where each digit can
be any value from 0 to 9. See section [182] on page 26 to change the default code.
Master Code (Default: 1234 / 123456)
With the System Master code a user can use any arming method and can program user codes. The System Master code can be 4 or 6 digits in
length (see section [090] option [1] on page 12), where each digit can be any digit from 0 to 9. The System Master code cannot be changed by the
installer or maintenance code, but it can be reset to default. See section [200] on page 26 to reset to default.
Magellan
5
Decimal and Hexadecimal Values
Figure 1: Decimal and Hexadecimal Values
Hexadecimal only
values:
[1] = A
[2] = B
[3] = C
[4] = D
[5] = E
[6] = F
Decimal and Hexadecimal Values:
Keys [0] to [9] = 0 to 9
6
Programming Guide
Entering Programming Mode
Use the built-in keypad to access Magellan’s installer programming mode. To access programming mode:
1.
2.
3.
4.
5.
Press and hold the [0] key.
Enter your [INSTALLER CODE] or [MAINTENANCE CODE].
Enter the 3-digit [SECTION] you wish to program.
Enter the required [DATA].
Press the [*] key to clear data or to go back one step. Press the [#] key to save changes.
There are two methods that can be used to enter data when in programming mode; Single Digit Data Entry and Feature Select Programming methods.
Single Digit Data Entry Method
After entering programming mode, some sections will require that you enter decimal values from 000 to 255. Other sections will require that you
enter hexadecimal values from 0 to F. The required data will be clearly indicated in this manual. When entering the final digit in a section, Magellan
will automatically save and advance to the next section. Refer to Figure 1 on page 6 to see the keys and their equivalent decimal and/or hexadecimal
value.
Feature Select Programming Method
After entering certain sections, eight options will be displayed where each option from [1] to [8] represents a specific feature. Press the key
corresponding to the desired option and the option number will appear in the LCD screen. This means the option is ON. Press the key again to
remove the digit from the LCD screen (a * appears), thereby, turning OFF the option. Press the [*] key to set all eight options to OFF. When the
options are set, press the [#] key to save and advance to the next section.
Magellan
7
Zone Programming
Zone Definitions ( J[4] J[6] )
000 = Zone Disabled (default) 008 = Delayed Fire Zone
001 = Entry Delay 1
009 = 24Hr. Burglary Zone
002 = Entry Delay 2
010 = 24Hr. Hold-up Zone
003 = Follow Zone
011 = 24Hr. Buzzer Zone
004 = Follow / Stay Zone
012 = 24Hr. Gas Zone
005 = Instant Zone
013 = 24Hr. Heat Zone
006 = Instant / Stay Zone
014 = 24Hr. Water Zone
007 = Instant Fire Zone
015 = 24Hr. Freeze Zone
Zone Options
[1] = Auto-zone Shutdown (default) [6] = Intellizone
[2] = Bypassable Zone (default)
[7] = Delay alarm transmission
[3] = Future Use
[8] = Force Zone (default)
[4]
OFF
OFF
ON
ON
[5]
OFF
ON
OFF
ON
Zone Alarm Type
Audible alarm (default)
Pulsed alarm
Silent alarm
Report only
Section
Description
Zone Definition
Zone Options
Section
Description
Zone Definition
Zone Options
[001]
Zone 1:____________
____/____/____
1 2 3 4 5 6 7 8
[009]
Zone 9:____________
____/____/____
1 2 3 4 5 6 7 8
[002]
Zone 2:____________
____/____/____
1 2 3 4 5 6 7 8
[010]
Zone 10:___________
____/____/____
1 2 3 4 5 6 7 8
[003]
Zone 3:____________
____/____/____
1 2 3 4 5 6 7 8
[011]
Zone 11___________
____/____/____
1 2 3 4 5 6 7 8
[004]
Zone 4:____________
____/____/____
1 2 3 4 5 6 7 8
[012]
Zone 12:___________
____/____/____
1 2 3 4 5 6 7 8
[005]
Zone 5:____________
____/____/____
1 2 3 4 5 6 7 8
[013]
Zone 13:___________
____/____/____
1 2 3 4 5 6 7 8
[006]
Zone 6:____________
____/____/____
1 2 3 4 5 6 7 8
[014]
Zone 14:___________
____/____/____
1 2 3 4 5 6 7 8
[007]
Zone 7:____________
____/____/____
1 2 3 4 5 6 7 8
[015]
Zone 15:___________
____/____/____
1 2 3 4 5 6 7 8
[008]
Zone 8:____________
____/____/____
1 2 3 4 5 6 7 8
[016]
Zone 16:___________
____/____/____
1 2 3 4 5 6 7 8
8
Programming Guide
Wireless Transmitter Programming
In the section corresponding to the desired zone, assign the transmitter’s serial number. In sections [058] and [059], assign the 6-digit serial number of the
MG-DCT1 that you are using as wireless doorbells. You can also use these sections to view the assigned transmitter’s signal strength.
Section Serial Number
Section Serial Number
[021]
Zone 1: ____/____/____/____/____/____
[041]
View signal strength of remote control 1
[022]
Zone 2: ____/____/____/____/____/____
[042]
View signal strength of remote control 2
[023]
Zone 3: ____/____/____/____/____/____
[043]
View signal strength of remote control 3
[024]
Zone 4: ____/____/____/____/____/____
[044]
View signal strength of remote control 4
[025]
Zone 5: ____/____/____/____/____/____
[045]
View signal strength of remote control 5
[026]
Zone 6: ____/____/____/____/____/____
[046]
View signal strength of remote control 6
[027]
Zone 7: ____/____/____/____/____/____
[047]
View signal strength of remote control 7
[028]
Zone 8: ____/____/____/____/____/____
[048]
View signal strength of remote control 8
[029]
Zone 9: ____/____/____/____/____/____
[049]
View signal strength of remote control 9
[030]
Zone 10: ____/____/____/____/____/____
[050]
View signal strength of remote control 10
[031]
Zone 11: ____/____/____/____/____/____
[051]
View signal strength of remote control 11
[032]
Zone 12: ____/____/____/____/____/____
[052]
View signal strength of remote control 12
[033]
Zone 13: ____/____/____/____/____/____
[053]
View signal strength of remote control 13
[034]
Zone 14: ____/____/____/____/____/____
[054]
View signal strength of remote control 14
[035]
Zone 15: ____/____/____/____/____/____
[055]
View signal strength of remote control 15
[036]
Zone 16: ____/____/____/____/____/____
[056]
View signal strength of remote control 16
[037]
to
[040]
Future use
[057]
Future use
[058]
Wireless Doorbell 1: ____/____/____/____/____/____
[059]
Wireless Doorbell 2: ____/____/____/____/____/____
Magellan
Adding a Remote Control:
( J[4] J[2] )
Remote controls can only be
added through the Installer
menu (see Conventions on
page 4). To do so:
1. Press the [MENU] key and
then press the [4] key
2. Enter the [INSTALLER CODE]
3. Press the [2] key
4. Follow the instructions that
appear
9
System Timers
Section Data (value from 000 to 255)
[060]
____/____/____ seconds
[061]
Description
Defaults
Entry delay 1 (
J[4] J[4] )
045 secs.
____/____/____ seconds
Entry delay 2 (
J[4] J[4] )
045 secs.
[062]
____/____/____ seconds
Exit delay (
[063]
____/____/____ minutes
Bell cut-off time (
[064]
____/____/____ x 15 minutes
No movement time
Disabled
[065]
____/____/____ seconds (minimum 10 seconds)
Intellizone delay
045 secs.
[066]
____/____/____ seconds
Recent closing delay
Disabled
[067]
____/____/____ times
Auto-zone shutdown
005 times
[068]
____/____/____ seconds
PGM1 timer
005 secs.
[069]
____/____/____ seconds
PGM2 timer
005 secs.
[070]
____/____/____ minutes
Power failure report delay
015 mins.
[071]
____/____/____ days
Auto-test report
Disabled
[072]
____/____/____ rings
Number of rings
008 rings
[073]
____/____/____ seconds
TLM fail timer
032 secs.
[074]
____/____/____ seconds
Answering machine override delay
030 secs.
[075]
____/____/____ seconds
Delay alarm transmission
Disabled
[076]
____/____/____ seconds (maximum 130 seconds)
Delay between dialing attempts
020 secs.
[077]
____/____/____ seconds
Pager/voice delay
005 secs.
[078]
____/____/____ seconds
Remote panic disarm lock delay
020 secs.
[079]
____/____/____ repetitions
Voice reporting message repetitions
003 reps.
10
J[4] J[4] )
J[4] J[4] )
060 secs.
004 mins.
Programming Guide
Section Data (value from 000 to 255)
Description
Defaults
[080]
____/____/____ days
Closing delinquency delay
Disabled
[081]
____/____/____ (000 to 007*)
Entry delay audio selection (
[082]
____/____/____ (000 to 007*)
Exit delay audio selection (
[083]
Future use
Future use
Future use
[084]
____/____:____/____ Hours
Auto-test report time
Disabled
[085]
____/____:____/____ Hours
Auto-arm time (
Disabled
003
J[4] J[4] )
002
J[4] J[4] )
J[8] J[3] )
* 000 = No tone; 001 = Beeping; 002 = Countdown; 003 = “Hold the Line”; 004 = Bach Symphony #40; 005 = “Mission Impossible”; 006 = “What is Love”;
007 = Radio tuner
Programmable Outputs (PGMs)
Section Description
[086]
PGM1 Activation Event
Event Group #
Sub-group #
(____/____)
(____/____)
(____/____)
(____/____)
(____/____)
(____/____)
(____/____)
(____/____)
(Default: Event group #07; Sub-group #99; Remote control option “B” - PGM activation by any user; see page 24)
[087]
PGM1 Deactivation Event
(Default: No event programmed)
[088]
PGM2 Activation Event
(Default: Event group #08; Sub-group #99; Remote control option “C” - PGM activation by any user; see page 24)
[089]
PGM2 Deactivation Event
(Default: No event programmed)
Refer to Appendix 1: PGM Event Table on page 27 for the PGM events that can be used to program Magellan’s PGM outputs.
Magellan
11
System Options
[090]
General Options
Option
[091]
ON
[1]
Access code length
‡ 6 digits
‡ 4 digits
[2]
Audible trouble warning (except AC power failures)
‡ Disabled
‡ Enabled
[3]
Lock master code
‡ Disabled
‡ Enabled
[4]
Use user code 16 as duress code
‡ Disabled
‡ Enabled
[5]
Console tamper supervision
‡ Disabled
‡ Enabled
[6]
Need code to bypass zones
‡ Disabled
‡ Enabled
[7]
PGM1 normal state
‡ N.O.
‡ N.C.
[8]
PGM2 normal state
‡ N.O.
‡ N.C.
OFF
ON
General Options
Option
12
Bold = Default setting
OFF
Bold = Default setting
[1]
Panic 1 (Emergency)
‡ Disabled
‡ Enabled
[2]
Panic 2 (Auxiliary)
‡ Disabled
‡ Enabled
[3]
Panic 3 (Fire)
‡ Disabled
‡ Enabled
[4]
Panic 1: Silent or audible alarm
‡ Silent
‡ Audible
[5]
Panic 2: Silent or audible alarm
‡ Silent
‡ Audible
[6]
Panic 3: Silent or audible alarm
‡ Silent
‡ Audible
[7]
PGM1 used as
‡ Direct output
‡ X10 output 7
[8]
PGM2 used as
‡ Direct output
‡ X10 output 8
Programming Guide
[092]
Arming/Disarming Options
Bold = Default setting
Option
[093]
ON
[1]
Auto-arm on time (
‡ Disabled
‡ Enabled
[2]
Auto-arm on no movement
‡ Disabled
‡ Enabled
[3]
Auto-arm in what arming mode
‡ Regular
‡ Stay
[4]
Switch to Stay arming if no entry delay is opened
‡ Disabled
‡ Enabled
[5]
Regular arming switches to Force arming
‡ Disabled
‡ Enabled
[6]
Stay arming switches to Force arming
‡ Disabled
‡ Enabled
[7]
One-touch Regular/Force arming
‡ Disabled
‡ Enabled
[8]
One-touch Stay arming
‡ Disabled
‡ Enabled
OFF
ON
J[8] J[2] )
Arming/Disarming Options
Bold = Default setting
Option
Magellan
OFF
[1]
Future use
‡ Future use
‡ Future use
[2]
Future use
‡ Future use
‡ Future use
[3]
Bell squawk when arming/disarming with remote control
‡ Disabled
‡ Enabled
[4]
No exit delay when arming with remote control
‡ Disabled
‡ Enabled
[5]
Report system disarming
‡ Always
‡ After alarm only
[6]
Exit delay termination
‡ Disabled
‡ Enabled
[7]
Follow zones become Entry Delay 2 zones when Delay zone is
bypassed
‡ Disabled
‡ Enabled
[8]
FM tuner ON when system is armed (
‡ Disabled
‡ Enabled
J[8] J[1] )
13
[094]
Zone Options
Bold = Default setting
Option
Stay delay zones
‡ Disabled
‡ Enabled
[2]
Report zone restore
‡ On Bell cut-off
‡ On zone closure
[3] & [4]
Tamper recognition options
‡ See table
‡ See table
‡ See table
‡ See table
[3]
OFF
OFF
ON
[4]
OFF
ON
OFF
ON
ON
- Disabled
- Trouble only
- Disarmed: Trouble only
- Armed: Follow zone’s alarm type (page 8)
- Disarmed: Audible alarm
- Armed: Follow zone’s alarm type (page 8)
[5]
Generate tamper trouble if detected on bypassed zone
‡ No
‡ Yes
[6] & [7]
Wireless transmitter supervision options
‡ See table
‡ See table
‡ See table
‡ See table
‡ No
‡ Yes
OFF
ON
[6]
OFF
OFF
ON
[7]
OFF
ON
OFF
ON
ON
- Disabled
- Trouble only
- Disarmed: Trouble only
- Armed: Follow zone’s alarm type (page 8)
- Disarmed: Audible alarm
- Armed: Follow zone’s alarm type (page 8)
Generate supervision trouble if detected on bypassed zone
Zone Options
Option
14
ON
[1]
[8]
[095]
OFF
Bold = Default setting
[1]
Zone 15 is hardwire zone 1
‡ Disabled
‡ Enabled
[2]
Zone 16 is hardwire zone 2
‡ Disabled
‡ Enabled
[3]
EOL (End-Of-Line) resistors
‡ No EOL
‡ Use EOL resistors
[4] to [8]
Future use
‡ Future use
‡ Future use
Programming Guide
[096]
General Options
Bold = Default setting
Option
[1] & [2]
[3] & [4]
[097]
Magellan
Doorbell 1 tone options
[1]
[2]
OFF
OFF
- Tone 1
OFF
ON
- Tone 2
ON
OFF
- Tone 3
ON
ON
- Tone 4
Doorbell 2 tone options
[3]
[4]
OFF
OFF
- Tone 1
OFF
ON
- Tone 2
ON
OFF
- Tone 3
ON
ON
- Tone 4
OFF
ON
‡ See table
‡ See table
‡ See table
‡ See table
‡ See table
‡ See table
‡ See table
‡ See table
[5]
Daylight savings time
‡ Disabled
‡ Enabled
[6]
AC power failure warning
‡ Disabled
‡ Enabled
[7]
Check-in supervision time
‡ 24Hrs
‡ 80 minutes
[8]
Future use
‡ Future use
‡ Future use
Reserved for future use
15
[098]
Dialer Options
Bold = Default setting
Option
[1] & [2]
[099]
Telephone line monitoring options
[1]
[2]
OFF
OFF
- TLM disabled
OFF
ON
- Generate a trouble
ON
OFF
- Generate audible alarm if armed
ON
ON
- Silent alarms become audible
ON
‡ See table
‡ See table
‡ See table
‡ See table
[3]
Switch to pulse on 5th attempt
‡ Disabled
‡ Enabled
[4]
Call back
‡ Disabled
‡ Enabled
[5]
Alternate dialing
‡ Disabled
‡ Enabled
[6]
Force dial
‡ Disabled
‡ Enabled
[7]
DTMF dialing
‡ Disabled
‡ Enabled
[8]
Pulse ratio
‡ 1:2
‡ 1:1.5
OFF
ON
Dialer Options 2
Option
16
OFF
Bold = Default setting
[1]
Use central station telephone number 2 as
‡ Regular
‡ Backup
[2] to [8]
Future use
‡ Future use
‡ Future use
Programming Guide
[100]
Event Call Direction Options for
Bold = Default setting
Arming / Disarming Report Codes
Option
OFF
ON
[1]
Call central station telephone number 1
‡ Disabled
‡ Enabled
[2]
Call central station telephone number 2
‡ Disabled
‡ Enabled
[3]
Call Pager telephone number
‡ Disabled
‡ Enabled
[4]
Future use
‡ Future use
‡ Future use
Alarm / Alarm Restore Report Codes
[101]
[5]
Call central station telephone number 1
‡ Disabled
‡ Enabled
[6]
Call central station telephone number 2
‡ Disabled
‡ Enabled
[7]
Call Pager telephone number
‡ Disabled
‡ Enabled
[8]
Future use
‡ Future use
‡ Future use
Event Call Direction Options for
Bold = Default setting
Tamper / Tamper Restore Report Codes
Option
OFF
ON
[1]
Call central station telephone number 1
‡ Disabled
‡ Enabled
[2]
Call central station telephone number 2
‡ Disabled
‡ Enabled
[3]
Call Pager telephone number
‡ Disabled
‡ Enabled
[4]
Future use
‡ Future use
‡ Future use
Trouble / Trouble Restore Report Codes
Magellan
[5]
Call central station telephone number 1
‡ Disabled
‡ Enabled
[6]
Call central station telephone number 2
‡ Disabled
‡ Enabled
[7]
Call Pager telephone number
‡ Disabled
‡ Enabled
[8]
Future use
‡ Future use
‡ Future use
17
[102]
Event Call Direction Options for
Bold = Default setting
Special Report Codes
Option
[103]
OFF
ON
[1]
Call central station telephone number 1
‡ Disabled
‡ Enabled
[2]
Call central station telephone number 2
‡ Disabled
‡ Enabled
[3]
Call Pager telephone number
‡ Disabled
‡ Enabled
[4] to [8]
Future use
‡ Future use
‡ Future use
OFF
ON
Wireless Transmitter Supervision Zone Options
Option
[104]
[1]
Zone 1 supervision
‡ Disabled
‡ Enabled
[2]
Zone 2 supervision
‡ Disabled
‡ Enabled
[3]
Zone 3 supervision
‡ Disabled
‡ Enabled
[4]
Zone 4 supervision
‡ Disabled
‡ Enabled
[5]
Zone 5 supervision
‡ Disabled
‡ Enabled
[6]
Zone 6 supervision
‡ Disabled
‡ Enabled
[7]
Zone 7 supervision
‡ Disabled
‡ Enabled
[8]
Zone 8 supervision
‡ Disabled
‡ Enabled
OFF
ON
Wireless Transmitter Supervision Zone Options
Option
18
Bold = Default setting
Bold = Default setting
[1]
Zone 9 supervision
‡ Disabled
‡ Enabled
[2]
Zone 10 supervision
‡ Disabled
‡ Enabled
[3]
Zone 11 supervision
‡ Disabled
‡ Enabled
[4]
Zone 12 supervision
‡ Disabled
‡ Enabled
[5]
Zone 13 supervision
‡ Disabled
‡ Enabled
Programming Guide
[104]
Wireless Transmitter Supervision Zone Options
Bold = Default setting
Option
OFF
ON
[6]
Zone 14 supervision
‡ Disabled
‡ Enabled
[7]
Zone 15 supervision
‡ Disabled
‡ Enabled
[8]
Zone 16 supervision
‡ Disabled
‡ Enabled
Communicator Settings
Section Data
Description
[105]
____/____/____
Report format for central station telephone number 1 (
J[4] J[3] )
[106]
____/____/____
Report format for central station telephone number 2 (
J[4] J[3] )
001 = Ademco slow (1400Hz 10BPS); 002 = Silent Knight (1400Hz 20BPS);
003 = SESCOA (2300Hz 20BPS); 004 = Ademco Contact ID (default); 005 = SIA FSK
[107]
____/____/____/____
Account number (
[108]
____/____/____/____
Panel identifier (for use with WinLoad software) (
[109]
____/____/____/____
Panel password (for use with WinLoad software) (
J[4] J[3] )
J[4] J[8] )
J[4] J[8] )
[110]
Reserved for future use
[111]
Central station telephone number 1 (32 digits maximum; if less than 32, press [#] to accept) (
J[4] J[3] )
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
Magellan
19
Section Data
[112]
Description
Central station telephone number 2 (32 digits maximum; if less than 32, press [#] to accept) (
J[4] J[3] )
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[113]
Pager Telephone # (32 digits maximum; if less than 32, press [#] to accept) (
J[4] J[3] )
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[114]
Numeric message sent with Pager Reporting (32 digits maximum; if less than 32, press [#] to accept) (
J[4] J[3] )
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[115]
to
[117]
Reserved for future use
[118]
PC telephone number for WinLoad (32 digits maximum; if less than 32, press [#] to accept)
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[119]
Service telephone number* (32 digits maximum; if less than 32, press [#] to accept) (
J[4] J[3] )
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
* Using Magellan’s speakerphone feature, the Service telephone number allows the user to directly call the installer or maintenance staff if any problems
arise.
20
Programming Guide
Report Codes
Arming Report Codes
Special Arming Report Codes
Disarming Report Codes
Default = FF
Special Disarming Report Codes
Section Data
Section Data
Section Data
Section Data
[120]
[121]
[122]
[123]
Magellan
____/____ User Code 1
[124]
____/____ Auto-arming
[126]
____/____ User Code 1
[130]
____/____ End auto-arm
____/____ User Code 2
____/____ Late to close
____/____ User Code 2
____/____ Disarm via PC
____/____ User Code 3
____/____ No movement
____/____ User Code 3
____/____ Future use
____/____ User Code 4
____/____ Partial arming
____/____ User Code 4
____/____ Future use
____/____ User Code 5
[125]
____/____ Quick-arming
[127]
____/____ User Code 5
____/____ User Code 6
____/____ Arming via PC
____/____ User Code 6
____/____ User Code 7
____/____ Future use
____/____ User Code 7
____/____ User Code 8
____/____ Future use
____/____ User Code 8
____/____ User Code 9
[128]
____/____ User Code 9
____/____ User Code 10
____/____ User Code 10
____/____ User Code 11
____/____ User Code 11
____/____ User Code 12
____/____ User Code 12
____/____ User Code 13
[129]
____/____ User Code 13
____/____ User Code 14
____/____ User Code 14
____/____ User Code 15
____/____ User Code 15
____/____ User Code 16
____/____ User Code 16
21
Alarm Report Codes
Alarm Restore Report Codes
Special Alarm Report Codes
Default = FF
Tamper Report Codes
Section Data
Section Data
Section Data
Section Data
[131]
[132]
[133]
[134]
22
____/____ Zone 1
[135]
____/____ Zone 1
[139]
____/____ Emer. panic
[141]
____/____ Zone 1
____/____ Zone 2
____/____ Zone 2
____/____ Aux. panic
____/____ Zone 2
____/____ Zone 3
____/____ Zone 3
____/____ Fire panic
____/____ Zone 3
____/____ Zone 4
____/____ Zone 4
____/____ Recent closing
____/____ Zone 4
____/____ Zone 5
[136]
____/____ Zone 5
[140]
____/____ Zone shutdown
[142]
____/____ Zone 5
____/____ Zone 6
____/____ Zone 6
____/____ Duress
____/____ Zone 6
____/____ Zone 7
____/____ Zone 7
____/____ Paramedical
____/____ Zone 7
____/____ Zone 8
____/____ Zone 8
____/____ Future use
____/____ Zone 8
____/____ Zone 9
[137]
____/____ Zone 9
[143]
____/____ Zone 9
____/____ Zone 10
____/____ Zone 10
____/____ Zone 10
____/____ Zone 11
____/____ Zone 11
____/____ Zone 11
____/____ Zone 12
____/____ Zone 12
____/____ Zone 12
____/____ Zone 13
[138]
____/____ Zone 13
[144]
____/____ Zone 13
____/____ Zone 14
____/____ Zone 14
____/____ Zone 14
____/____ Zone 15
____/____ Zone 15
____/____ Zone 15
____/____ Zone 16
____/____ Zone 16
____/____ Zone 16
Programming Guide
Tamper Restore Report Codes
System Troubles Report Codes
System Troubles Restore Report
Codes
Section Data
Section Data
Section Data
[145]
[146]
[147]
[148]
____/____ Zone 1
[149]
____/____ Future use
[152]
____/____ TLM
Default = FF
Special Report Codes
Section Data
[155]
____/____ Cold start
____/____ Zone 2
____/____ AC failure
____/____ AC failure
____/____ Test report
____/____ Zone 3
____/____ Battery failure
____/____ Battery failure
____/____ Future use
____/____ Zone 4
____/____ Timer loss
____/____ Timer prog.
____/____ WinLoad
logout
____/____ Zone 5
[150]
____/____ Unit tamper
[153]
____/____ Unit tamp. rest.
[156]
____/____ Installer logon
____/____ Zone 6
____/____ Fail to comm.
____/____ Future use
____/____ Installer logout
____/____ Zone 7
____/____ TX low battery
____/____ TX low battery
____/____ Delinquency
____/____ Zone 8
____/____ TX superv. loss
____/____ TX superv. rest.
____/____ Future use
____/____ Zone 9
[151]
____/____ RF interference
[154]
____/____ RF interference
____/____ Zone 10
____/____ Future use
____/____ Future use
____/____ Zone 11
____/____ Future use
____/____ Future use
____/____ Zone 12
____/____ Future use
____/____ Future use
[157]
to
[160]
Reserved for future use
____/____ Zone 13
____/____ Zone 14
____/____ Zone 15
____/____ Zone 16
Magellan
23
Remote Control Button Programming
Table 1: Remote Control Button Options
Hexa
Description
Hexa
Description
0
Button disabled
8
Panic 1†
1
Regular arming
9
Panic 2†
2
Stay arming
A*
Panic 3†
3
Instant arming
B*
PGM Activation (Event Group #07. See Table on page 11)
4
Force arming
C*
PGM Activation (Event Group #08. See Table on page 11)
5
Future use
D*
Turn FM radio ON/OFF
6
Future use
E*
FM radio memory scan
7
Future use
F*
Paramedical alarm
* = Hexa values A to F are keys [1] to [5] from Magellan’s Center Keypad. Refer to Figure 1 on page 6.
† = The panic feature (section [091] options [1] to [3]) must be enabled.
Section Data (Default: 4DE0)
[161]
Remote Control Buttons
_______/_______/_______/_______ Remote Control 1
The
button of the MG-REM1
remote control has been permanently
programmed to disarm the system.
The button’s functionality cannot be
altered.
+
[162]
_______/_______/_______/_______ Remote Control 2
[163]
_______/_______/_______/_______ Remote Control 3
[164]
_______/_______/_______/_______ Remote Control 4
+
+
+
+
+
The
,
and
button combinations do not function
with the MG-REM1 remote control.
+
[165]
_______/_______/_______/_______ Remote Control 5
MG-REM1
+
24
Programming Guide
Section Data (Default: 4DE0)
[166]
Remote Control Buttons
_______/_______/_______/_______ Remote Control 6
The
button of the MG-REM1
remote control has been permanently
programmed to disarm the system.
The button’s functionality cannot be
altered.
+
[167]
_______/_______/_______/_______ Remote Control 7
[168]
_______/_______/_______/_______ Remote Control 8
[169]
_______/_______/_______/_______ Remote Control 9
+
+
+
+
+
The
,
and
button combinations do not function
with the MG-REM1 remote control.
+
[170]
_______/_______/_______/_______ Remote Control 10
[171]
_______/_______/_______/_______ Remote Control 11
[172]
_______/_______/_______/_______ Remote Control 12
MG-REM1
+
+
+
[173]
_______/_______/_______/_______ Remote Control 13
+
[174]
_______/_______/_______/_______ Remote Control 14
[175]
_______/_______/_______/_______ Remote Control 15
+
+
[176]
_______/_______/_______/_______ Remote Control 16
+
Magellan
25
System Settings
Section Data
Description
Defaults
[180]
____/____/____
Installer code lock
(Enter 147 to lock code, 000 to unlock code)
000
[181]
____/____/____/____/____/____
Installer code (
000000
[182]
____/____/____/____/____/____
Maintenance code (
[200]
Reset Master code to default (123456)
[201]
Reset all programmable sections to factory default values
J[4] J[8] )
J[4] J[8] )
111111
Installer Quick Keys
To access the Installer Quick keys, press and hold the [0] key from the Main keypad, enter the [installer code] and then press from the Center keypad:
Key [1] = Test Report: Send the “Test Report” report code programmed in section [155] (page 23) to the central monitoring station.
Key [2] = Cancel Communication: Cancels all communication with the WinLoad software or with the central monitoring station until the next reportable
event.
Key [3] = Answer WinLoad Software: Will force the console to answer an incoming call from the central monitoring station that is using the WinLoad
software.
Key [4] = Call WinLoad Software: Will dial the PC telephone number programmed in section [118] (page 20) in order to initiate communication with a
computer using the WinLoad software.
Key [5] = Installer Test Mode: The installer test mode will allow you to perform walk tests where the siren will squawk to indicate opened zones. Press the
[5] key again to exit.
26
Programming Guide
Appendix 1: PGM Event Table
Event Group #
00 = Zone closed
01 = Zone opened
02 = System status
03 = Future use
04 = Future use
05 = Non-reportable event
Magellan
Sub-group #
01 to 16 = Zone number
99 = Any zone number
00 = N/A
01 = N/A
02 = Silent alarm
03 = Buzzer alarm
04 = Steady alarm
05 = Pulsed alarm
06 = Strobe
07 = Alarm stopped
08 = Squawk ON
09 = Squawk OFF
10 = Ground start
11 = System disarmed
12 = System armed
13 = Entry delay engaged
99 = Any system status event
Future use
00 = Telephone line trouble
01 = Future use
02 = Arm with no entry delay
03 = Arm in Stay mode
04 = Arm in Force mode
05 = Full arm when armed in Stay mode
27
Event Group #
05 = Non-reportable event (cont’d)
06 = Remote access
07 = PGM activation (Remote control button option “B”; see page 24)
08 = PGM activation (Remote control button option “C”; see page 24)
Sub-group #
06 = PC fail to communicate
07 and 08 = Future use
09 = Doorbell 1 battery trouble
10 = Doorbell 1 battery trouble restore
11 = Doorbell 2 battery trouble
12 = Doorbell 2 battery trouble restore
13 = Utility Key 1 pressed (keys [1] and [9] from the center keypad)
14 = Utility Key 2 pressed (keys [2] and [10] from the center keypad)
15 = Utility Key 3 pressed (keys [3] and [11] from the center keypad)
16 = Utility Key 4 pressed (keys [4] and [12] from the center keypad)
17 = Utility Key 5 pressed (keys [5] and [13] from the center keypad)
18 = Utility Key 6 pressed (keys [6] and [14] from the center keypad)
19 = Utility Key 7 pressed (keys [7] and [15] from the center keypad)
20 = Utility Key 8 pressed (keys [8] and [16] from the center keypad)
21 = User remote access granted
22 = User remote access denied
23 = Tamper generated alarm
24 = Supervision loss generated alarm
99 = Any non-reportable event
01 to 16 = User number
99 = Any user number
09 = Future use
Future use
10 = Bypass programming access
01 to 16 = User number
99 = Any user number
11 = Future use
Future use
28
Programming Guide
Event Group #
Sub-group #
12 = Delay zone alarm transmission
01 to 16 = Zone number
99 = Any zone number
13 = Arming with user
01 to 16 = User number
99 = Any user number
14 = Special arming
00 = Auto-arming
01 = Late to close
02 = No movement arming
03 = Partial arming
04 = Quick arming
05 = Arming through WinLoad
99 = Any special arming event
15 = Disarming with user
16 = Disarm after alarm with user
17 = Alarm cancelled with user
18 = Special disarming
01 to 16 = User number
99 = Any user number
00 = Auto-arm cancelled
01 = Disarm through WinLoad
02 = Disarm through WinLoad after alarm
03 = Alarm cancelled through WinLoad
04 = Paramedical alarm cancelled
99 = Any special disarming event
19 = Zone bypassed
20 = Zone in alarm
21 = Fire alarm
22 = Zone alarm restore
01 to 16 = Zone number
99 = Any zone number
23 = Fire alarm restore
Magellan
29
Event Group #
Sub-group #
24 = Special alarm
00 = Panic emergency
01 = Panic medical
02 = Panic fire
03 = Recent closing
04 = Global shutdown
24 = Special alarm (cont’d)
05 = Duress alarm (User 16)
99 = Any special alarm event
25 = Zone shutdown
26 = Zone tampered
27 = Zone tamper restore
01 to 16 = Zone number
99 = Any zone number
28 = New trouble
00 = N/A
01 = AC failure
02 = Battery failure
03 = Clock loss
04 = Console tamper
05 = Fail to communicate to central
06 = Fail to communicate to voice report
07 = Fail to communicate to pager
08 = RF interference
99 = Any new trouble event
29 = Trouble restored
00 = Telephone line restored
01 = AC failure
02 = Battery failure
03 = Clock lost
04 = Console tamper restore
05 = N/A
06 = N/A
30
Programming Guide
Event Group #
29 = Trouble restored (cont’d)
Sub-group #
07 = N/A
08 = RF interference restore
99 = Any trouble restore event
30 = Low battery on zone
31 = Low battery on zone restore
32 = Zone supervision trouble
01 to 16 = Zone number
99 = Any zone number
33 = Zone supervision restored
34 = Special
00 = System power up
01 = Reporting test
02 = WinLoad logon
03 = WinLoad logoff
04 = Installer in programming mode
05 = Installer exited programming mode
06 = Closing delinquency delay elapsed
99 = Any special event
35 = Paramedical alarm
01 to 16 = User number
99 = Any user number
36 = Zone triggered a utility report
37 = Signal strength weak 1
38 = Signal strength weak 2
39 = Signal strength weak 3
01 to 16 = Zone number
99 = Any zone number
40 = Signal strength weak 4
41 = Future use
Future use
42 = Future use
Future use
Magellan
31
Event Group #
Sub-group #
43 = Future use
Future use
44 = Future use
Future use
45 = Future use
Future use
46 = Future use
Future use
47 = Future use
Future use
48 = Fire delay started
01 to 16 = Zone number
99 = Any zone number
49 = Fire delay cancelled
32
Programming Guide
Appendix 2: Connection Diagrams
Power Connections
Figure 2: Connecting the Transformer
Back view of the Magellan console.
Do not use any switch-controlled
outlets.
16Vac 20VA transformer
Insert the transformer’s wires
into the AC terminals.
Magellan
33
Figure 3: Connecting the Battery
1. Insert the backup battery’s plug into the
connector labelled BATT.
Partial view of the backside of the
Magellan console.
Battery compartment
2. Slide in the battery pack horizontally, tilt the battery pack
downward and then tuck it in Magellan’s battery compartment.
3. After inserting the battery pack’s plug, tuck the cables in the
specially designed slot.
To order a battery pack, the battery
pack’s part number is:
Paradox #0780100178.
34
4. Snap in the battery compartment
cover when finished.
Programming Guide
Telephone Line Connections
Figure 4: Telephone Line Direct Connect
Telephone Line Connection Note
The Magellan console must be able to seize the telephone line and place a
call in an emergency situation. It must be able to do this even if other
equipment (telephones, answering machines, computer modems, etc.)
already has the line in use. To do so, the Magellan console must be
connected to a properly installed RJ31X (or RJ38X) jack that is electrically
in series with and ahead of all other equipment attached to the same
telephone line. Proper installation is depicted in the diagram below. If you
have any questions concerning these instructions, you should consult your
telephone company or a qualified installer about installing the RJ31X (or
RJ38X) jack and the Magellan console for you.
Back view of the Magellan console.
To connect the telephone line
directly to the console:
1. Connect a RJ31X to the R-1, T1, RING and TIP terminals as
shown at right.
2. Connect the telephone
company wires and the home
telephone to the RJ31X.
Magellan
35
Figure 5: Line Plug Connection
Do not connect
the RJ-11 cable
into this plug.
Back view of the Magellan console.
To connect the telephone line directly to the console:
1. Insert one end of the 4-pin RJ-11 cable into the line plug of the Magellan console.
2. Insert the other end of the RJ-11 cable into a standard telephone wall plug.
36
Programming Guide
PGM Connections
Figure 6: PGM Connections
Method 1
(< 100mA)
Back view of the
Magellan console.
External
Power
Supply
Devices
such as a
light, etc.
Method 2
(> 100mA)
If the PGM current consumption is less than 100mA, use
method 1. If the PGM current consumption is to exceed
100mA, use method 2.
Do not exceed 24Vdc when connecting the
PGM outputs.
External
relay
Devices
such as a
light, etc.
External
Power
Supply
Magellan
37
Hardwire Zone Connections
Figure 7: Hardwire Zone Connections
Back view of the Magellan console.
Hardwire
zone 1
(zone 15)
38
1k9
EOL
Hardwire
zone 2
(zone 16)
Programming Guide
X10 Transmitter Connections
Figure 8: Connecting the X10 Transmitter
Back view of the Magellan console.
1. Connect one end of the inverted
4-pin RJ-11 cable into the X10
plug of the console.
2. Connect the other end of the
inverted 4-pin RJ-11 cable into
the X10 transmitter.
3. Plug the X10 transmitter into a
standard wall outlet.
For information on
programming the X10
features of Magellan, refer to
the X10 Operation User
Guide which can be found
and downloaded for free
from our Web site at
www.paradox.ca.
Do not connect the X10
transmitter into this plug.
1
Inverted 4-pin
RJ-11 cable
3
X10 devices (transmitters,
modules, etc.) are not
supplied and cannot be
purchased through Paradox
Security Systems Ltd.
Make sure that an inverted 4-pin
RJ-11 cable is used when
connecting the Magellan console to
the X10 transmitter. Note the pin
configuration below:
Inverted
4-pin
RJ-11
cable
Magellan
Console
Pin 1
Pin 2
Pin 3
Pin 4
X10
Transmitter
Pin 4
Pin 3
Pin 2
Pin 1
X10 transmitter
Magellan
2
39
Connecting Magellan to WinLoad
Figure 9: Connecting Magellan to WinLoad
Back view of the
Magellan console.
4- to 10-pin cable
(supplied with the
306 Adapter)
4-pin
connector
cable
306 Adapter
Computer
containing
WinLoad
software
40
Standard
DB-9 cable
(9-pin serial
cable)
Programming Guide
Connecting to a UIP-256
Figure 10: Connecting to a UIP-256 Universal In-Field Programmer
Back view of the
Magellan console.
Connect the 10pin cable of the
UIP-256 to the 10pin connector of
the Magellan
console
UIP-256
Universal
In-Field
Programmer
Standard
DB-9 cable
(9-pin serial
cable)
Download latest
firmware version of
Magellan from the
Paradox Web site at
www.paradox.ca
Magellan
41
Connecting a Paradox Memory Key (PMC-3)
Figure 11: Connecting a Paradox Memory Key (PMC-3)
PMC-3
Jumper ON:
Read from and/or write to memory key
Jumper OFF:
Write protected (Read from the memory key
only)
Back view of the Magellan console.
42
Programming Guide
Connecting the Radio Antenna
Figure 12: Connecting the Radio Antenna
Back view of the
Magellan console.
If the radio reception is not very good, connect the supplied
radio antenna to the ANT terminal of the Magellan console.
Move the antenna around until the spot with the best reception
is found.
Magellan
43
Mounting Magellan on the Wall
Figure 13: Mounting Magellan onto the Wall Plate
To mount the wall plate:
1. Place the wall plate on the desired spot of the wall.
2. Drill and insert the screws into the holes labeled A at left.
To mount the Magellan console:
1.
2.
3.
4.
Place the console back plate flush against the mounted wall plate.
Slide the Magellan’s open slots labeled D (see Inset 1 below) onto the wall plate’s tabs labeled B.
Gently apply downward pressure to insert the wall plate’s tabs into Magellan’s open slots.
Insert two screws through the wall plate’s screw holes labeled C and into Magellan’s back plate
screw holes labeled E (see Inset 1 below). This will secure the console to the wall.
Inset 1: Magellan’s Backplate
B
A (x4)
D
D
C
E
44
Programming Guide
Tabletop Mounting
Figure 14: Tabletop Mounting
Plastic feet (x2)
To mount the Magellan console on a tabletop
the wall plate has to be inserted beforehand:
1. Slide the wall plate’s tabs labeled B into the
Magellan console’s open slots labeled D
(see Figure 13 on page 44).
2. Insert two screws (included) through the wall
plate’s screw holes labeled C into holes
labeled E in the Magellan console (see
Figure 13 on page 44).
3. Insert the two plastic feet (included) into the
appropriate holes on the back plate of the
Magellan console as shown at left.
4. Attach the two rubber stops (included) to the
lower corners of the wall plate as shown at
left.
Back view of the
Magellan console.
Wall plate
Rubber stops (x2)
The plastic feet are used to raise the
Magellan console to a slight angle for
easy viewing while the rubber stops
prevent the console from sliding when
Magellan is being used.
Tabletop mounting may not be an
approved installation method by
local regulations. It is recommended
that the local regulations be verified
prior to installing the Magellan
console using this method.
Tabletop
Magellan
45
Appendix 3: Ademco Contact ID Report Code List
CID#
Reporting Code
Programming
Value
Medical Alarms - 100
100
CID#
125
Reporting Code
Duress - Egress granted
Programming
Value
12
147
Reporting Code
Sensor supervision failure
Programming
Value
24
Medical alarm
01
101
Pendant transmitter
02
130
Burglary
13
150
24-hour non-burglary
25
102
Fail to report in
03
131
Perimeter
14
151
Gas detected
26
27
Fire Alarms - 110
Burglar Alarms - 130
CID#
24-hour Non-burglary - 150 and 160
132
Interior
15
152
Refrigeration
110
Fire alarm
04
133
24-hour
16
153
Loss of heat
28
111
Smoke
05
134
Entry/Exit
17
154
Water leakage
29
112
Combustion
06
135
Day/Night
18
155
Foil break
2A
113
Water flow
07
136
Outdoor
19
156
Day trouble
2B
114
Heat
08
137
Tamper
1A
157
Low bottled gas level
2C
115
Pull station
09
138
Near alarm
1B
158
High temperature
2D
116
Duct
0A
139
Intrusion verified
1C
159
Low temperature
2E
117
Flame
0B
118
Near alarm
0C
Panic Alarms - 120
General Alarms - 140
161
Loss of air flow
2F
140
General alarm
1D
162
Carbon monoxide detected
30
141
Polling loop open
1E
163
Tank level
31
120
Panic alarm
0D
142
Polling loop short
1F
121
Duress
0E
143
Expansion module failure
20
Fire Supervisory - 200 and 210
200
Fire supervisory
32
122
Silent
0F
144
Sensor tamper
21
201
Low water pressure
33
123
Audible
10
145
Expansion module tamper
22
202
Low CO2
34
124
Duress - Access granted
11
146
Silent burglary
23
203
Gate valve sensor
35
46
Programming Guide
CID#
Reporting Code
Programming
Value
CID#
Reporting Code
Programming
Value
CID#
Reporting Code
Programming
Value
204
Low water level
36
322
Bell 2
49
205
Pump activated
37
323
Alarm relay
4A
350
Communication
5D
206
Pump failure
38
324
Trouble relay
4B
351
Telco 1 fault
5E
System Troubles - 300 and 310
Communication Troubles - 350 and 360
325
Reversing relay
4C
352
Telco 2 fault
5F
300
System trouble
39
326
Notification appliance chk. #3 4D
353
Long range radio
60
301
AC loss
3A
327
Notification appliance chk. #4 4E
354
Fail to communicate
61
302
Low system battery
3B
355
Loss of radio supervision
62
303
RAM checksum bad
3C
330
356
Loss of central polling
63
357
Long range radio VSWR prob. 64
System Peripheral Troubles - 330 and 340
System peripheral
4F
304
ROM checksum
3D
331
Polling loop open
50
305
System reset
3E
332
Polling loop short
51
306
Panel program changed
3F
333
Expansion module failure
52
370
Protection loop
65
307
Self-test failure
40
334
Repeater failure
53
371
Protection loop open
66
308
System shutdown
41
335
Local printer paper out
54
372
Protection loop short
67
309
Battery test failure
42
336
Local printer failure
55
373
Fire trouble
68
310
Ground fault
43
337
Exp. module DC loss
56
374
Exit error alarm
69
311
Battery missing/dead
44
338
Exp. module low battery
57
375
Panic zone trouble
6A
312
Power supply over current
limit
45
339
Exp. module reset
58
376
Hold-up zone trouble
6B
313
Engineer reset
46
341
Exp. module tamper
59
377
Swinger trouble
6C
342
Exp. module AC loss
5A
378
Cross-zone trouble
6D
Sounder/Relay Troubles - 320
320
Sounder/relay
47
343
Exp. module self-test fail
5B
321
Bell 1
48
344
RF receiver jam detect
5C
Magellan
Protection Loop Troubles - 370
Sensor Troubles - 380 and 390
380
Sensor trouble
6E
47
CID#
Reporting Code
Programming
Value
CID#
Reporting Code
Programming
Value
CID#
Reporting Code
Programming
Value
381
Loss of supervision - RF
6F
407
Remote arm/disarm
80
430
Access program mode exit
92
382
Loss of supervision - RPM
70
408
Quick arm
81
431
Access threat level change
93
383
Sensor tamper
71
409
Keyswitch open/close
82
432
Access relay/trigger fail
94
384
RF transmitter low battery
72
433
Access RTE shunt
95
385
Smoke detector Hi sensitivity 73
411
Call back request made
434
Access DSM shunt
96
386
Smoke detector Low
sensitivity
74
412
Success - download access 84
387
Intrusion detector Hi
sensitivity
75
413
Unsuccessful access
85
441
Armed Stay
97
388
Intrusion detector Low
sensitivity
76
414
System shutdown
86
442
Keyswitch armed Stay
98
389
Sensor self-test failure
77
415
Dialer shutdown
87
450
Exception open/close
99
391
Sensor watch trouble
78
416
Successful upload
88
451
Early open/close
9A
392
Drift compensation error
79
393
Maintenance alert
7A
Open/Close - 400
Remote Access - 410
83
Access Control - 420 and 430
Arming - 440 and 450
452
Late open/close
9B
421
Access denied
89
453
Failed to open
9C
422
Access report by user
8A
454
Failed to close
9D
400
Open/Close
7B
423
Forced access
8B
455
Auto-arm failed
9E
401
Open/Close by user
7C
424
Egress denied
8C
456
Partial arm
9F
402
Group open/close
7D
425
Egress granted
8D
457
Exit error (user)
A0
403
Automatic open/close
7E
426
Access door propped open
8E
458
User on premises
A1
404
Late to open/close
5E
427
Access point door status
monitor trouble
8F
459
Recent close
A2
405
Deferred open/close
5F
428
Access point request to exit 90
406
Cancel
7F
429
Access program mode entry 91
48
System - 460
461
Wrong code entry
A3
Programming Guide
CID#
Reporting Code
Programming
Value
CID#
Reporting Code
Programming
Value
Reporting Code
Programming
Value
462
Legal code entry
A4
612
Point not tested
C7
463
Re-arm after alarm
A5
570
Zone bypass
B5
613
Intrusion zone walk tested
C8
464
Auto-arm time extended
A6
571
Fire bypass
B6
614
Fire zone walk tested
C9
465
Panic alarm reset
A7
572
24Hr. zone bypass
B7
615
Panic zone walk tested
CA
466
Service ON/OFF premises
A8
573
Burglary bypass
B8
616
Service request
CB
574
Group bypass
B9
621
Event log reset
CC
Sounder Relay Disabled - 520
Bypasses - 570
CID#
520
Sounder/Relay disabled
A9
575
Swinger bypass
BA
622
Event log 50% full
CD
521
Bell 1 disabled
AA
576
Access zone shunt
BB
623
Event log 90% full
CE
522
Bell 2 disabled
AB
577
Access point bypass
BC
624
Event log overflow
CF
523
Alarm relay disabled
AC
625
Time/Date reset
D0
524
Trouble relay disabled
AD
601
Time/Date inaccurate
D1
525
Reversing relay disabled
AE
526
Notification appliance chk.
#3 disabled
AF
527
Notification appliance chk.
#4 disabled
B0
Modules - 530
Test/Misc. - 600
Manual trigger test
BD
626
602
Periodic test report
BE
627
Program mode entry
D2
603
Periodic RF transmission
BF
628
Program mode exit
D3
604
Fire test
C0
629
32-hour event log marker
D4
605
Status report to follow
C1
630
Schedule change
D5
531
Module added
B1
606
Listen-in to follow
C2
631
Exception schedule change D6
532
Module removed
B2
607
Walk test mode
C3
632
Access schedule change
D7
608
Periodic test - system
trouble present
C4
654
System inactivity
D8
Communication Disables - 550 and 560
551
Dialer disabled
B3
609
Video transmitter active
C5
552
Radio transmitter disabled
B4
611
Point test OK
C6
Magellan
49
Warranty
Paradox Security Systems Ltd. ("Seller") warrants its products to be free from manufacturing defects in materials and workmanship for one-year following the date of manufacture. Seller will, within this
period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user. This warranty will not apply to any equipment, or any parts thereof, which have
been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which any serial numbers have been altered, defaced or removed. Seller will not
be responsible for any dismantling or reinstallation charges.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BEYOND THE DESCRIPTION HEREIN. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF SELLER, ITS SUPPLIERS AND/OR AFFILIATES.
Any action for breach of warranty, including but not limited to any implied warranty of merchantability, must be brought within three months following the end of the warranty period. IN NO CASE WILL
SELLER OR ITS AFFILIATES BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.
In case of defect, contact the security professional who installed and maintains your security system. In order to exercise the warranty, the product must be returned to the indicated RMA location by the
security professional, shipping costs prepaid and insured. After repair or replacement, Seller assumes the cost of returning products under warranty. Seller will have no obligation under this warranty, or
otherwise, if the product has been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts of God, or on which any serial
numbers have been altered, defaced or removed. Seller will not be responsible for any dismantling, reassembly or reinstallation charges.
This warranty contains the entire warranty. Any prior agreements or representations, whether oral or written, are either merged herein or are expressly cancelled. Seller neither assumes, nor authorizes any
other person purporting to act on its behalf to modify, to change, or to assume for it, any other warranty or liability concerning its products.
Notwithstanding anything herein, in no event shall Seller or its affiliates be liable for an amount in excess of Seller's original selling price of the product, for any loss or damage, whether direct, indirect,
incidental, consequential or otherwise arising out of any failure of the product. Seller's warranty, as hereinabove set forth, shall not be enlarged, diminished or affected by and no obligation or liability shall
arise from Seller offering to render or rendering technical advice or services in connection with the purchase of goods hereunder.
SELLER STRONGLY RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED MONTHLY.
Warning: Despite frequent testing, and due to, but not limited to, any or all of the following: criminal tampering, electrical or communication disruption, or improper use, it is possible for the system to fail to
perform as expected. Seller does not represent that the product/system may not be compromised or circumvented or that the product or system will prevent any personal injury or property loss by burglary,
robbery, fire or otherwise; nor that the product or system will in all cases provide adequate warning or protection. A properly installed and maintained alarm may only reduce risk of burglary, robbery, fire or
otherwise but it is not insurance or a guarantee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR
OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn advise the consumer to take any and all precautions for his or her safety including,
but not limited to, fleeing the premises and calling 911, the police and/or fire department, in order to mitigate the possibilities of harm and/or damage.
Seller is not an insurer of either the property or safety of the user's family or employees, and limits its liability for any loss or damage including incidental or consequential damages to Seller's original selling
price of the product in question, regardless of the cause of such loss and/or damage.
Some locations do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, or differentiate in their treatment of limitations
of liabilities for ordinary or gross negligence, therefore the above limitations may be reduced and/or not apply to you. This warranty gives you specific legal rights and you may also have additional rights
depending on the location.
© 2004 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice. One or more of the following US patents may apply: 6215399, 6111256, 5751803, 5721542,
5287111, 5119069, 5077549, 5920259, 5886632. Canadian and international patents may also apply. Magellan is a trademark or registered trademark of Paradox Security Systems Ltd. or its affiliates in
Canada, the United States and/or other countries.
For technical support in Canada or the U.S., call 1-800-791-1919 for English or 1-866-912-0600 for French, Monday to Friday from 8:00AM to 8:00PM EST. For technical support outside Canada and the
U.S., call 00-1-450-491-7444, Monday to Friday from 8:00AM to 8:00PM EST.
Please feel free to check out our Web site at www.paradox.ca.
Paradox Security Systems Ltd. - 780 Industriel Blvd., Saint-Eustache (Quebec), 7JR 5V3, CANADA. Tel.: (450) 491-7444; Fax: (450) 491-2313
50
Programming Guide
Installer Menu Overview
ready to arm
menu
1-bypass zones
2-alarm clock
3-time and date
4-system setup
Must enter the
installer, maintenance
or user code to
access
1-language
2-user profile†
3-communicator
central report?
voice report?
utility report?
add tel. # 1
add tel. # 1
add tel. # 1
add backup #
add tel. # 2
add tel. # 2
account number
record alrm mes?
report type?
type:
type:
type:
type:
pager report?
add service tel?
4-delays & tones
5-system test
5-chime zone
6-alarm memory
7-history log
8-utility setup
9-version number
† = Master Code only
6-zone profile
test
test
test
test
8-passwords
zones?
remotes?
reporting?
hardware?
= Installer Code only
9-demo mode
ring volume?
ring tone?
record alrm mes?
disarming
trouble
paramedic
zone acti.
select
select
select
select
user
trouble
user
zone
add message?
entry delay 1?
entry delay 2?
exit delay?
bell cutoff del?
1-radio on arm
2-auto arming
3-auto arm time
4-lost remote
5-x10 setup
6-backlight adj.
7-contrast adj.
8-ring setup
add tel. # 1
tel.:
report format
select zone
open/close cover
7-signal strngth
on time?
on zone open?
remote button?
on exit delay?
when armed?
on entry delay?
on alarm?
house code?
modify label?
zone type
installer code
maintenance code
panel id
pc password
MAGELLAN-EP02

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement