Defender Security 82-12460 User manual


Add to my manuals
10 Pages

advertisement

Defender Security 82-12460 User manual | Manualzz

5.6” TFT LCD MONITOR

User Manual

Part Number 82-12460

Edition V1.00

Notice:

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limitations for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer, or an experienced radio/TV technician for help.

Safety Information

— The 5.6” LCD Monitor can be operated by battery when not connected to any other power source. If the battery is not correctly removed during replacement, it may cause physical damage. In addition, the battery is sensitive to heat, water and direct sunlight. Avoid prolonged exposure to water and/or direct heat, or sunlight..

— Please read this user manual entirely before operating monitor.

— Please use the accessories, especially the power adapter, specified by manufacturer. The use of unapproved accessories may cause physical or mechanical damage. Before turning on the equipment be sure all accessories were installed correctly.

— Do not use it near water.

— Do not install near any heat source or in direct sunlight.

— Place on stable platform, like a desk during use to avoid injury or system damaged.

— Protect the power cord to avoid crushing by heavy objects. Do not stretch

2

power cords across walkways.

— Avoid plugging power cord into overloaded AC outlet. Serious equipment damage, or fire could result from over loading the circuit.

— Monitor should only be serviced by a trained technician, or the original manufacturer

— Disconnect the power from the monitor if any of the following situations occur:

‹ Power damaged

‹ Water/liquid splits on monitor

‹ The monitor is dropped, or the cabinet damaged

Warranty Information

A 1-year warranty against workmanship from the data of purchase is valid only if the monitor housing is unopened. If a problem is encountered under normal use, please contact Defender Security Customer Service at

1-800-543-4330. Warranty cannot be guaranteed if damage to the monitor is determined to be the result of misuse.

3

INDEX

Introduction................................................................................... 5

Package Contents.................................................................... 5

TFT LCD Monitor...................................................................... 6

OSD Menu ............................................................................ 8

OSD Menu Descriptions ..................................................... 8

Test Patterns........................................................................ 9

Dimension: ............................................................................... 9

Specifications ............................................................................. 10

Specifications. .................................. Error! Bookmark not defined.

4

Introduction

Before operating you new 5.6” TFT LCD Monitor, please review the following:

• Check package contents

• Review TFT LCD Monitor controls

• Review Monitor function keys

Check package

The following items are packaged with the monitor when shipped. Please note that some optional accessories may not be included in your package. If any accessories are missing or damaged, please contact the manufacturer immediately. Please keep the package for re-packaging, if necessay.

Accessories

□ TFT LCD Monitor x1

□ Rechargeable Li-polymer battery x 1

□ User manual x1

□ Audio cable x1

□ Car power cord x1

□ Carry case x1

5

TFT LCD Monitor Controls

Refer to the following front, side and rear view figures and charts describing the controls and inputs on TFT LCD monitor:

Front view

9

8

7

6

1

2

3

4

5

6

7

8

9

5

Description

Power / Charge indicator

Power on/off

Input signal source selection

Speaker

TFT LCD Display

Speaker

Volume Down Control, or Scroll Down menu selections

OSD Menu / Picture

Volume Up Control, or Scroll Up menu selections

6

4

1

2

3

Side View

1

2

1

2

3

4

5

Rear View:

Description

Power ON/OFF/Charge

Power input jack (12VDC)

3.5mm Audio Input/ Output

BNC Video Output

BNC Video1 / Video 2 Input

5

4

3

1

1

Description

Rechargeable battery/cover

7

OSD Menu

1. LANGUAGE

2. AUTO OFF

3. CONTRAST

4. BRIGHTNESS

5. COLOR

6. TINT

7. SHARPNESS

8. RECALL

1. Press “PICTURE” function key to display the on-screen “MENU”

2. Use UP/DOWN function keys to scroll through the menu options. Press the “PICTURE” button to select a menu option. Repeat the same navigation instructions to select sub-menu options.

OSD Menu Descriptions

1. LANGUAGE

2. AUTO OFF

3. CONTRAST

4. BRIGHTNESS

Ten Languages option: English Chinese

(Traditional) Chinese(Simple) Japanese French

Spanish Italian Dutch Portuguese Russian Czech

Three types option DISABLE 5 MINUTES

10 MINUTES

Adjust contrast of the screen image

5. COLOR

6. TINT

7. SHARPNESS

8. RECALL

Adjust brightness of the screen image

Adjust color of the screen image

Adjust tint of the screen image(NTSC system only)

Adjust sharpness of the screen image

Recall the default value

8

TEST PATTERNS

Press the “SOURCE” button, and select “PATTERN” in the sub-menu. Use the “DOWN”/ “UP” arrows to select the desired test pattern:

Color Bars

Cross-hatch

Point R

Dimension:

G B

9

Specifications:

Item

LCD Display

Response Time Tr / Tf

Display Mode

Input

Specification

5.6” TFT LCD Monitor

Resolution 320(H) x 234(V) (4:3)

Contrast ratio 150:1

Brightness 300cd/m 2

35ms(tr+tf)

Video 1,Video 2,Test pattern

2 x BNC Inputs (1.0Vp-p 75Ω)

1 x Audio Input (3.5mm stereo Jack)

Output

Front Control Panel Buttons

Operating Temperature

Storage Temperature

Power Input

1 x BNC Outputs (2.0Vp-p 75Ω)

1 x Audio Output (3.5mm stereo Jack)

Power on/off, LED indicator, Source,

UP (Volume Increase),

Down (Volume Decrease),

0 o C~40 o C

-10 o C~60 o C

AC Input:100~240V/1.5A,50 / 60Hz

Power Consumption

Rechargable battery

Dimension

Packing Dimension

DC 9V/13.5W

Li-Po battery (7.4V / 2600mAh)

180(W) x 120(H) x 34(D)mm

256 x 175 x 116mm(1pc/Box)

Stand / bracket supported 1/4” standard screw mount on bottom

Specifications are subject to change without notice

10

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement