AEG | L 60060 TL | User manual | AEG L 60060 TL User manual

L 60060 TL 1
L 60260 TL 1
EN User manual
2
www.aeg.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
WASHING PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CONSUMPTION VALUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
USING THE APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
3
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is
not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions
with the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• If the appliance has a child safety device, we recommend you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
1.2 General Safety
• Before maintenance, deactivate the appliance and
disconnect the mains plug from the mains socket.
• Do not change the specification of this appliance.
• Obey the maximum load volume of 6 kg (refer to the
“Programme chart” chapter).
4
www.aeg.com
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar
(0,8 MPa)
• The ventilation openings in the base (if applicable)
must not be obstructed by a carpet.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2.
SAFETY INSTRUCTIONS
Electrical connection
2.1 Installation
• Remove all the packaging and the
transit bolts.
• Keep the transit bolts. When you
move the appliance again you must
block the drum.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C or where it is exposed to the
weather.
• Obey the installation instruction supplied with the appliance.
• Make sure that the floor where you install the appliance is flat, stable, heat
resistant and clean.
• Do not install the appliance where the
appliance door can not be fully
opened.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Make sure that there is air circulation
between the appliance and the floor.
• Adjust the feet to have the necessary
space between the appliance and the
carpet.
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with
the power supply. If not, contact an
electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the appliance power supply
cable need to be replaced, this must
be carried out by our Service Centre.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• This appliance complies with the
E.E.C. Directives.
ENGLISH
ance. Contact the Service to ensure
which accessories can be used.
Water connection
• Make sure not to cause damage to the
water hoses.
• The appliance is to be connected to
the water mains using the new supplied hose-sets. Old hose sets must
not be reused.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
2.2 Use
WARNING!
Risk of injury, electrical shock,
fire, burns or damage to the appliance.
• Use this appliance in a household only.
• Do not change the specification of this
appliance.
• Obey the safety instructions on the
detergent packaging.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Make sure that you remove all metal
objects from the laundry.
• Do not put a container to collect possible water leakage under the appli-
5
2.3 Care and Cleaning
WARNING!
Risk of injury or damage to the
appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
2.4 Discard the appliance
1.
Disconnect the mains plug from the
mains socket.
2. Cut off the mains cable and discard
it.
3. Discard the door catch. This prevents children or pets to be closed
in the appliance. There is a risk of
suffocation (only for front-loading
appliances).
6
www.aeg.com
3. PRODUCT DESCRIPTION
1
7
2
8
9
3
10
11
4
5
6
12
1 Control panel
7 Rating plate
2 Lid
8 Mains cable
3 Lid handle
4 Filter access door
9 Water inlet valve
10 Water drain hose
5 Lever to move the appliance
11 Transit bolts
6 Adjustable feet
12 Feet for the appliance level
4. ACCESSORIES
1
2
3
1 Plastic cap
To close the hole on the rear side of
the cabinet, after the removal of the
transit bolt.
2 Plastic hose guide
To connect the drain hose on the
edge of a sink.
3 Anti-flood inlet hose
To prevent possible leakage.
ENGLISH
7
5. CONTROL PANEL
1
2
3
9
1 On/Off button
3 Display
5
6
Start/Pause button
Delay start button
Time saving button
7 Liquid detergent button
8
9
7
6
5
4
The AUTO Stand-by function automatically deactivates the appliance to decrease the energy consumption when:
• You do not use the appliance for 5 minutes before you press button 4 .
– All settings are cancelled.
– Press button 1 to activate the appliance again.
– Set again the washing programme
and all possible options.
• After 5 minutes from the end of the
washing programme. Refer to 'At the
end of programme'.
2 Programme knob
4
8
Spin button
Temperature button
5.1 On Off button 1
5.2 Programme knob 2
Press this button to activate or deactivate the appliance. A tune sounds when
the appliance is activated.
Turn this knob to set a programme.
5.3 Display 3
A
B
C
8
www.aeg.com
The display shows:
A
• The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay
start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button 4 flashes.
•
When the programme is completed.
B
Door lock
You cannot open the appliance door when the symbol is
on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
C
The child lock symbol
The symbol comes on when you activate this device.
5.4 Start/Pause button 4
5.7 Liquid detergent button 7
Press button 4 to start or interrupt a
programme.
Press button 7 to adapt the cycle if you
use a liquid detergent.
5.5 Delay start button 5
5.8 Spin button 8
Press button 5 to delay the start of a
programme from 30 minutes to 20 hours.
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water when the programme is completed.
5.6 Time save button 6
Press the button 6 to decrease the
programme duration.
• Press one time to set 'Shortened duration' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
'Rinse Hold' function is
on.
ENGLISH
5.9 Temperature button 9
Press button 9 to change the default
temperature.
5.10 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
6 and button 7 at the same time
until the display shows the symbol
.
• To deactivate the function, press button 6 and button 7 at the same
time until the symbol
goes off.
You can activate the function:
• Before you press the Start/Pause button 4 : the appliance cannot start.
• After you press the Start/Pause button
4 , all the buttons and the programme knob are deactivated.
5.11 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
5 and button 6 at the same time
is on.
until the indicator
• To deactivate the function press button 5 and button 6 at the same
is off.
time until the indicator
6. WASHING PROGRAMMES
Programme
Temperature
Type of load
Cycle
max. weight of load description
Functions
Cottons
95° - Cold
White and coloured
cotton with normal
soil.
max. 6 kg
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
White and coloured
cotton with heavy
soil.
max. 6 kg
Prewash
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
White and coloured
cotton with heavy
soil.
max. 6 kg
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
Cottons + Prewash
95° - Cold
Cottons + Stain
95° - 40°
9
10 www.aeg.com
Programme
Temperature
Type of load
Cycle
max. weight of load description
Functions
Synthetics
60° - Cold
Synthetic or mixed
fabric items with normal level of soil.
max. 2,5 kg
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
Synthetic fabric items Wash
with normal soil.
Rinses
max. 1 kg
Short spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
Delicate fabrics as
Wash
acrylics, viscose, pol- Rinses
yester items with nor- Short spin
mal soil.
max. 2,5 kg
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
Machine washable
Wash
wool. Hand washable Rinses
wool and delicate
Short spin
fabrics with «hand
washing» care symbol.
max. 1 kg
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
Spin3)
All fabrics
The maximum load
of the laundry is related to the type of
laundry.
Drainage of the
water
Spin phase at the
maximum speed.
SPIN REDUCTION
Drain
All fabrics
The maximum load
of the laundry is related to the type of
laundry.
Drainage of the
water
All fabrics.
One rinse with
additive spin
phase
Easy Iron2)
60° - Cold
Delicates
40° - Cold
Wool
40° - Cold
Rinse
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE4)
ENGLISH
Programme
Temperature
Type of load
Cycle
max. weight of load description
Functions
Set this programme
to wash curtains. It
adds automatically
the prewash phase to
clean the dust from
the curtains.
Do not put the detergent into the prewash compartment.
max. 2,5 kg
Prewash
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
All items in jeans.
Jersey made items
with hi-tech materials.
max.3 kg
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
20 Min. - 3 kg
40° - 30°
Cotton and synthetic
items with light soil
or worn only one
time.
Wash
Rinses
Short spin
SPIN REDUCTION
LIQUID DETERGENT
Cottons Eco
White and fast coloured cotton with
normal soil.
max. 6 kg
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
LIQUID DETERGENT
EXTRA RINSE
TIME SAVE1)
Curtains
40° - Cold
Jeans
60° - Cold
Economy5)
60° - 40°
11
1) if you press the button 6 two times (Extra Quick duration), we recommend that you
decrease the quantity of the load. It is possible to load fully the appliance, however the
washing results are reduced.
2) The wash and spin phase is soft to prevent the creases of the laundry. The appliance
adds some rinses.
3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make
sure that it agrees with the laundry.
4) Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs
delicate rinses and a short spin.
5) Standard programmes for the Energy Label consumption values] according to
regulation 1061/2010, the “Cottons Eco 60° C” and “Cottons Eco 40° C” are respectively
the “standard 60° C cotton programme” and the “standard 40° C cotton programme”.
They are the most efficient programmes in terms of combined energy and water
consumption for washing normally soiled cotton laundry.
Set this programme to have a good washing results and decrease the energy
consumption. The time of the washing programme is extended. For cotton economy
programmes you can set only the Extra Quick duration.
12 www.aeg.com
pany for the washing of machine washable Woolmark product provided that the
garments are washed according to the
instructions on the garment label and
those issued by the manufacturer of this
washing machine. M1027
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification trademark.
6.1 Woolmark Certificate
The wool wash cycle of this machine has
been approved by The Woolmark Com-
7. CONSUMPTION VALUES
The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature.
Programmes
Load
(kg)
Energy
consumption (kWh)
Cottons 60
°C
6
1.20
55
150
60
53
Cottons 40
°C
6
0.70
55
120
60
53
Synthetics
40 °C
2.5
0.55
45
103
37
35
Delicates
40 °C
2.5
0.50
45
80
37
35
1
0.35
50
70
32
30
Wool/
Hand wash
30 °C
Water
Approxi- Remain- Remainconsumpmate
ing
ing
tion (litre)
promoisture moisture
gramme
(%)1)
(%)1)
duration L60060T L60260T
(minutes)
L1
L1
Standard cotton programmes
Standard
60 °C cotton
6
1.09
46
249
60
53
Standard
60 °C cotton
3
0.80
41
159
60
53
Standard
40 °C cotton
3
0.67
42
146
60
53
1) At the end of spin phase.
ENGLISH
Off Mode (W)
Left On Mode (W)
0.48
0.48
13
The information given in the charts above are in compliance with the EU Commision regulation 1015/2010 implementing directive 2009/125/EC.
8. BEFORE FIRST USE
Put a small quantity of detergent in the
main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest tem-
perature without laundry. This removes
all possible dirt from the drum and the
tub.
9. USING THE APPLIANCE
1.
2.
Open the water tap.
Connect the mains plug to the mains
socket.
3.
Press button 1 to activate the appliance.
4. Put the laundry in the appliance.
5. Use the correct quantity of detergent and additives.
6. Set and start the correct programme
for the type of laundry and soil.
9.1 Loading the laundry
A
1.
2.
Open the lid of the appliance.
Push the button A (depending on
model). The drum opens automatically.
3. Put the laundry. Make sure to not
put too much laundry into the drum.
4. Close the drum and the lid of your
washing machine.
Before you close the lid of your
appliance, make sure that you
close the drum correctly.
14 www.aeg.com
9.2 Using detergent and additives
• Measure out the detergent and the
fabric conditioner.
Detergent compartment for prewash phase.
The marks MAX are the maximum levels for the quantity of detergent (powder or liquid).
Detergent compartment for washing phase.
The marks MAX are the maximum levels for the quantity of detergent (powder or liquid).
Compartment for liquid additives (fabric conditioner, starch).
The mark M is the maximum level for the quantity liquid additives.
Flap for powder or liquid detergent.
Liquid or powder detergent
1.
2.
CLICK
A
ENGLISH
3.
15
4.
CLICK
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
9.3 Setting and starting a
programme
1.
2.
Turn the programme knob.
The indicator of button 4 flashes
with red colour.
3. The indicators of the default temperature and spin speed come on. To
change the temperature and/or the
spin speed, press the related buttons.
4. Set the available functions and the
delay start. When you press the relevant button, the indicator of the set
function comes on or the display
shows the related symbol.
5.
Press button 4 to start the programme. The indicator of button 4
is on with red colour.
The drain pump can operate for
a short time when the appliance
fills water.
9.5 Cancel a programme
1.
Turn the programme knob to
to cancel the programme.
2. Turn again the programme knob to
a new washing programme. At this
time you can also set the available
functions.
The appliance does not drain the
water.
9.6 Change a function
You can change only some functions before they operate.
1.
Press button 4 . The indicator
flashes.
2. Change the function set.
9.7 Set the delay start
1.
Press button 5 again and again until the display shows the number of
minutes or hours. The related symbols comes on.
2.
Press button 4 , the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
9.4 Interrupt a programme
1.
Press button 4 . The indicator
flashes.
2.
Press button 4 again. The washing
programme continues.
16 www.aeg.com
Before you press button 4 to
start the appliance, you can cancel or change the set of the delay
start.
9.8 Cancel the delay start
1.
Press button 4 . The related indicator flashes.
2.
Press button 5 again and again until the display shows 0’.
3.
Press button 4 . The programme
starts.
9.9 Open the lid
While a programme or the delay start
operates, the lid is locked.
To open the lid:
1.
Press button 4 . You can open the
lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.
2. Open the lid.
3. Close the lid and press button 4 .
The programme or the delay start
continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the lid .
If necessary, do the following
procedure to open the lid.
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that there is no
water in the drum.
If you deactivate the appliance, it
is necessary to set the programme again.
9.10 At the end of programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause button 4 goes off.
• You can open the lid 2 minutes after
the appliance stops. The door lock
symbol goes off.
• Press button 1 to deactivate the appliance. After five minutes from the
end of the programme, the AUTO
OFF function automatically deactivates the appliance.
When you activate the appliance
again, the display shows the end
of the last set programme. Turn
the programme knob to set a
new cycle.
• Remove the laundry from the appliance. Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is completed, but the 'Rinse Hold' function is
on:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
If necessary, decrease the spin
speed.
1.
2.
Press the Start/Pause button 4 .
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock symbol goes off,
you can open the door
4. Deactivate the appliance.
The appliance drains and spins
automatically after approximately
18 hours.
ENGLISH
17
10. HELPFUL HINTS AND TIPS
10.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are
on the laundry care labels.
• Do not wash together white and coloured items.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool and items with painted illustrations.
• Remove hard stains.
• Wash with a special detergent heavy
soil stains.
• Be careful with the curtains. Remove
the hooks or put the curtains in a
washing bag or pillowcase.
• Do not wash in the appliance :
– Laundry without hems or with cuts
– Underwired bras.
– Use a washing bag to wash small
items.
• A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase again.
10.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the
appliance.
Special stain removers are available. Use
the special stain remover that is applicable to the type of stain and fabric.
10.3 Detergents and additives
• Only use detergents and additives
specially made for washing machines.
• Do not mix different types of detergents.
• To help the environment, do not use
more than the correct quantity of detergent.
• Obey the instructions that you find on
the on packaging of these products.
• Use the correct products for the type
and colour of the fabric, the programme temperature and the level of
soil.
• If you use liquid detergents, do not set
the prewash phase.
• If your appliance has not the detergent dispenser with the flap device,
add the liquid detergents with a dosing ball.
10.4 Ecological hints
To help the environment, use less water
and energy, obey these instructions:
• Set a programme without the prewash
phase to wash laundry with normal
soil.
• Always start a washing programme
with the maximum load of laundry.
• If necessary, use a stain remover when
you set a programme with a low temperature.
• To use the correct quantity of the detergent, check the water hardness of
your domestic system
10.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a
water softener.
To know the water hardness in your area,
contact your local water authority.
Obey the instructions that you find on
the packaging of the products.
Equivalent scales measure the water
hardness:
• German degrees (°dH).
• French degrees (°TH).
18 www.aeg.com
• mmol/l (millimol for each litre - international unit for the hardness of water).
• Clarke degrees.
Water hardness table
Level
Type
Water hardness
°dH
°T.H.
mmol/l
Clarke
1
soft
0-7
0-15
0-1.5
0-9
2
medium
8-14
16-25
1.6-2.5
10-16
3
hard
15-21
26-37
2.6-3.7
17-25
4
very hard
> 21
> 37
>3.7
>25
11. CARE AND CLEANING
WARNING!
Disconnect the appliance from the mains
supply before you clean it.
11.1 Descaling
The water we use contains limescale. If it
becomes necessary, use a water softener
to remove limescales.
Use a special product made for washing
machines. Obey the instructions that you
find on the packaging of the manufacturer.
Do this separately from the laundry
wash.
11.2 External cleaning
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
11.4 Detergent dispenser
To clean the dispenser:
CAUTION!
Do not use alcohol, solvents or
chemical products.
11.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Make regularly a maintenance
wash. To do this:
• Empty the laundry from the drum.
• Set the hottest cotton wash programme
• Use a correct quantity of powder detergent with biological properties.
After each wash, keep the door open for
a while to prevent mould and to let unpleasant smells go out.
ENGLISH
19
1.
Remove the detergent dispenser
and disconnect the two parts.
2. Clean all the parts with water.
3. Assemble the two parts of the detergent dispenser.
4. Put back the detergent dispenser.
WARNING!
• Disconnect the mains plug
from the mains socket.
• Do not remove the filter while
the appliance operates. Do not
clean the drain filter if the water in the appliance is hot. The
water must be cold before you
clean the drain filter.
11.5 Drain filter
Regularly examine the drain filter
and make sure that it is clean.
To clean the drain filter:
1.
Open the drain filter door.
2.
Put a container below the recess of
the drain filter to collect the water
that flows out. Turn the filter until it
is vertical.
Turn the filter fully and remove it.
Remove fluff and objects.
Clean the filter with water.
Put it back and screw it in.
Make sure that you tighten correctly
the filter to prevent leakages.
Close the drain filter door.
3.
4.
5.
6.
7.
8.
11.6 The inlet hose filter and
the valve filter
WARNING!
• Disconnect the mains plug
from the mains socket.
20 www.aeg.com
To clean the water inlet filters:
Close the water tap.
Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose with
a stiff brush.
1.
2.
4.
5.
6.
7.
Remove the inlet hose behind the
appliance.
Clean the filter in the valve with a
stiff brush or a towel.
Install again the inlet hose. Make
sure that the couplings are tight to
prevent leakages.
Open the water tap.
90˚
11.7 Emergency drain
1.
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (3) of
'To clean the drain filter'.
If necessary, clean the filter.
Put the drainage duct back and close the
drain filter flap.
2.
11.8 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
3.
4.
5.
Close the water tap and disconnect
the inlet hose.
Put the end of the inlet hose in a
container and let the water flow out
of the hose.
Do the Drain programme and let it
operate until the end of the cycle.
Turn the programme knob to Stop
to disconnect the appliance from the
power supply.
Disconnect the appliance.
ENGLISH
21
WARNING!
Make sure that the temperature
is more than 0 °C before you use
the appliance again.
The manufacturer is not responsible for damages caused by low
temperatures.
12. TROUBLESHOOTING
The start of the appliance does not occur or it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the
service centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
•
- The appliance does not fill with
water.
•
- The appliance does not drain
the water.
•
- The appliance door is open or
not closed correctly.
•
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Problem
Possible cause
Possible solution
The appliance
does not fill with
water.
The water tap is closed.
Open the water tap.
The water inlet hose is
damaged.
Make sure that the water inlet
hose has no damages.
The filters in the water
inlet hose is blocked .
Clean the filters. Refer to 'Care
and cleaning'.
The water tap is blocked Clean the water tap.
or is furred with limescale.
The connection of the
water inlet hose is not
correct.
Make sure that the connection
is correct.
The water pressure is
too low.
Contact your local water authority.
The appliance
The water drain hose is
does not drain the damaged.
water.
Make sure that the water drain
hose has no damages.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and cleaning'.
The connection of the
water drain hose is not
correct.
Make sure that the connection
is correct.
22 www.aeg.com
Problem
Possible cause
Possible solution
A washing programme
without the drain phase
is set.
Set the drain programme.
The function Rinse &
Hold is on.
Set the drain programme.
The appliance
door is open or
not closed correctly.
Close the door correctly.
The anti-flood device is on.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
The spin phase
does not operate.
The programme
does not start.
There is water on
the floor.
The spin phase is off.
Set the spin programme.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and cleaning'.
Balance problems with
the laundry load.
Adjust manually the items in the
tub and start the spin phase
again.
The mains plug is not
connected in the mains
socket.
Put in the mains plug.
Blow out fuse in the
household fuse box.
Replace the fuse.
You did not press button 4 .
Press button 4 .
The delay start is set.
To start immediately the programme, cancel the delay start.
The Child Lock function
is activated.
Deactivate the Child Lock function.
Leakages from the couplings of the water hoses.
Make sure that the couplings
are tight.
Leakages from the drain Make sure that the drain pump
pump.
filter is tight.
You cannot open
the appliance
door.
The water drain hose is
damaged.
Make sure that the water inlet
hose has no damages.
The washing programme is in operation.
Let the washing programme
end.
There is water in the
drum.
Set the drain or the spin programme.
ENGLISH
23
Problem
Possible cause
The appliance
makes an unusual
noise.
Incorrect level of the ap- Adjust the level of the applipliance.
ance. Refer to 'Installation'.
Possible solution
You did not remove the
packaging and/or the
transit bolts.
Remove the packaging and/or
the transit bolts. Refer to 'Installation'.
The load is very small.
Add more laundry in the drum.
The appliance fills The end of the drain
with water and
hose is too low.
drain immediately.
The washing results are not satisfactory.
Make sure that the drain hose is
in the correct position.
The detergent you used Increase the detergent quantity
was not sufficient or cor- or use a different one.
rect.
You did not remove the
stubborn stains before
you wash the laundry.
Use special products to remove
the stubborn stains.
Incorrect temperature
was set.
Make sure that you set the correct temperature.
Too much laundry load.
Decrease the laundry load.
After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm codes,
contact the service centre.
13. TECHNICAL INFORMATION
Dimensions
Electrical connection:
Width / Height / Depth
Total depth
600 mm
Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid particles and moisture ensured by the protective cover,
except where the low voltage equipment has no
protection against moisture
Water supply pressure
IPX4
Minimum
0,5 bar (0,05 MPa)
Maximum
8 bar (0,8 MPa)
Cold water
Water supply 1)
Maximum load
400 / 890 / 600 mm
Cotton
6 kg
24 www.aeg.com
Spin speed
Maximum
1000 rpm (L60060TL1)
1200 rpm (L60260TL1)
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
14. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
ENGLISH
25
26 www.aeg.com
ENGLISH
27
108805100-A-462012
www.aeg.com/shop
Download PDF

advertising