Manfrotto | MVH502AH | Manfrotto Video Supports - Prizma-foto

Manfrotto Video Supports - Prizma-foto
Manfrotto Video Supports
The skills of the world’s best photographers and video
operators are brought together by Manfrotto in an
innovative on-line platform.
Featuring:
Harry De Zitter,
Bill Frakes,
Joe McNally,
Drew Gardner,
Roberto Bigano,
Ami Elsius,
Marc de Tollenaere,
Kristoff Ramon,
David Duchemin,
Milko Marchetti,
Uri Golman,
Adam Barker,
Sébastien Devaud,
Kazuyuki Okajima and many others.
manfrottoschoolofxcellence.com
manfrotto.com
LNORDV13,G _ N 1 04/13
Notes
Manfrotto
Video
Supports
Technological evolution is profoundly changing videography.
Camcorder performance improves, even as camcorders
themselves shrink in size and become more affordable;
meanwhile, the latest HDSLRs combine top quality video with
proven photographic capabilities. As a result, more and more
new users are picking up cameras, joining our world and
producing fantastic results.
HDSLR cameras and the latest interchangeable lens
camcorders make new demands of support and accessory
equipment too, demands answered by Manfrotto Video
Products. Manfrotto offers both traditional support systems
and innovative alternative supports for video, all backed up by
a complete range of accessories ranging from video camera
and HDSLR remote controls to bags and carrying solutions.
Contents
4
This is an exciting time for us at Manfrotto: the increasing
fusion of video and photo equipment and the crossover of
users between the two worlds let us apply even more of our
photographic sector experience, knowledge and leadership to
videography. Collaborating with some of the greatest names
in film and video, we’re developing the well-designed, high
performance, top quality, innovative products that meet and
exceed the expectations of our demanding expert users…
and help set the pace of the evolution of technology.
We hope you’ll find the catalogue inspiring and useful.
For all the news that’s still too new to print, please visit
www.manfrotto.com
HEADS
18
TRIPODS
28
MONOPODS
30
SYMPLA FIG RIG SYSTEM
44
FIG RIG
46
REMOTE CONTROLS
54
ALTERNATIVE SUPPORTS
56
ACCESSORIES
62
BAGS AND STRAPS
66
INDEX
To understand the icons, consult the key to symbols on the back page.
2
3
HEADS
Video technology has changed radically in recent years, with a quick succession of ever lighter,
more compact cameras launched. These cameras have in turn led to new ways of filming, allowing
one-man units to produce results that only a few short years ago would have required a full crew.
Video is moving to a new dimension, Bridging TechnologyTM heads help you cross over!
The Bridging TechnologyTM range is a key element in Manfrotto’s response to these
changes in the video sector. The ergonomic and technical characteristics of our Bridging
TechnologyTM series are the result of our expertise in producing lightweight camera
supports. The extended range offers ideal support across the full spectrum of “new” video
cameras, providing a perfect match for the latest camcorders, HDSLRs and even 3D rigs,
with each individual head designed and engineered to help videographers get the best
possible results from HD camera equipment.
4
Bridging TechnologyTM:
an exclusive Manfrotto patent.
The perfect synthesis of an innovative “bridge”
structure and cutting-edge engineering.
Real fluid cartridges, longer sliding plates and inner ball-bearings ensure that all our Bridging TechnologyTM heads provide smoother
shooting, better balance and more precise movement.
Suitable for a wide range of cameras, Bridging TechnologyTM heads have maximum loads between 5kg and 12kg,and are also
available in combination with a variety of aluminum or carbon fiber twin- or single-tube tripods.
5
Unique features for unique footage
1
2
3
4
5
6
7
8
6
MVH500AH
MVH500A
MVH502AH
MVH502A
504HD
509HD
Fluid cartridges for smooth movement and precise control
3/8” Easy Link connector to support external accessories
Wider platform for HDSLR bodies and the sliding plate travel to balance the latest cameras with interchangeable lenses
An even more rigid structure for maximum precision and improved responsiveness
Counterbalance system ensures quick set-up and optimal performance
Ball bearings for more precise, smooth movements
Lightweight modern materials for optimum balance of strength and size
ABR (Advanced Balancing Recorder) for precision when fixing equipment, ensuring a perfect position, saving time and making
this operation much more efficient, accurate and fast
MVH500AH
MVH500A
MVH502AH
MVH502A
504HD
509HD
Fluidity
PAN & TILT
Fixed
Cartridges
Fixed
Cartridges
Variable Fluid
Cartridges
Variable Fluid
Cartridges
Variable Fluid
Cartridges
Variable Fluid
Cartridges
Counterbalance
System
Fixed
Fixed
Fixed
Fixed
4 steps
4 steps
Flat base
Flat base with
3/8” female
attachment
ø 75mm
ø 75mm
ø 100mm
Scala 1:1 da catalogo.
FLAT
Scala 1:1 da catalogo.
FLAT
Leveling
bowl
55
55
C.O.G.
C.O.G.
Flat base with
3/8” female
attachment
ø 60mm
ABR
(Advanced
Balancing
Recorder)
N.A.
N.A.
N.A.
N.A.
N.A.
Available
Counterbalance
weight
2,4kg - 5.3lb
2,4kg - 5.3lb
4kg - 8.8lb
4kg - 8.8lb
7,5kg -16.5lb
8,5kg - 18.7lb
Safety
payload
5kg - 11lb
5kg - 11lb
7kg - 15.4lb
7kg - 15.4lb
12kg - 26.5lb
9kg - 19.8lb
Center
of gravity
55
55
55
55
55
125
Weight
0,9kg - 2.1lb
1,1kg - 2.5lb
1,6kg - 3.6lb
1,8kg - 4lb
2,9kg - 6.4lb
3,9kg - 8.6lb
Head
height
9,5cm - 3.7in
12,6cm - 5in
13cm - 5.1in
15cm - 5.9in
15,5cm - 6in
18cm - 7in
500PLONG
500PLONG
504PLONG
504PLONG
504PLONG
509PLONG
(120mm - 4.7in)
(140mm - 5.5in)
(140mm - 5.5in)
(140mm - 5.5in)
(140mm - 5.5in)
(140mm - 5.5in)
Easy Link
connectors
Available x 1
Available x 1
Available x 2
Available x 2
Available x 2
Available x 2
Leveling
bubble
Available
Available
Available
Available
Available
(illuminated)
Available
(illuminated)
Sliding
plate
7
fixed
MVH500A
fixed
MVH500AH
fixed
fixed
Scala 1:1 da catalogo.
55
55
C.O.G.
C.O.G.
FLAT
Scala 1:1 da catalogo.
FLAT
MVH500A Fluid Video Head - 60mm half ball
1 Locking knobs
2 CBS: Counterbalance System
3 Leveling bubble
The new 500, which replaces the 701HDV, is a lightweight video head featuring a
wider platform to accommodate both HDSLR and interchangeable lens camcorder,
as well as a sliding plate that ensures the appropriate balance even when shooting
with very long lenses. The 500, the entry level of the Bridging Technology™ series,
ensures smooth shots and fine control of up to 5kg of equipment. Its brand new
side lock allows fast, secure and easy camera attachment. It has one Easy Link 3/8”
connector to allow an external monitor or other accessory equipment to be fitted.
The MVH500A has a 60mm half ball video tripod mount.
2
5kg
11lb
2,4kg
5.3lb
1,1kg
2.5lb
12,6cm
4,9in
3
1
500PLONG
1 FDS: Fluid Drag System
2 Locking knobs
3 Wider platform + longer sliding plate
4 Easy Link - 3/8’’ thread connection
MVH500AH Fluid Video Head - flat base
Same characteristics as the MVH500A, but with a flat base mount with standard
3/8” thread. Ideal for tripod/slider/rig/crane application.
3
4
5kg
11lb
2,4kg
5.3lb
0,9kg
2.1lb
9,5cm
3.7in-
500PLONG
2
1
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
100
1 FDS: Fluid Drag System
2 Side lock lever
90
80
2
70
55
40
30
20
10
1
0
1
2.2
1
4.4
2,4
5.3
3
6.6
4
8.8
5
11
Payload kg / lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance weight
Safety payload
Leveling bubble
Pan bar
8
60mm half ball (MVH500A) - Flat (MVH500AH)
Fixed fluid cartridge
Fixed fluid cartridge
Fixed @ 2,4kg (5.3lb)
5kg (11lb)
Available
Available
Pan bar attachment
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Available on right and left sides
No
500PLONG Quick Release with Side Lock
100mm (39in)
3/8” and 1/4” camera screws + anti-rotation pin
360°
-70° +90°
-20° C +60° C
MVM500A
FLUID MONOPOD WITH 500 HEAD
MVK500AM SYSTEM
2,4kg
5.3lb
2,4kg
5.3lb
5kg
11lb
77cm
30in
200,5cm
78.2in
2,1kg
4.7lb
500PLONG
5kg
11lb
72cm
28.3in
67,5cm
26.3in
MVK500C SYSTEM
154cm
60.1in
3,1kg
6.8lb
Head
MVH500A
Aluminum MVT502AM
Tripod
Mid spreader included
included
Bag
Head
Tripod
Bag
5kg
11lb
73cm
28.7in
56cm
21.8in
MVH500AH
Carbon Fiber 755CX3
included
148cm
57.7in
Head
Tripod
Bag
5kg
11lb
85cm
33.4in
38,5cm
15in
182,5cm
71.2in
3,4kg
7.5lb
MVH500A
Carbon Fiber 535
included
MVH500AH, 755XBK SYSTEM
MVH500AH, 755CX3K SYSTEM
2,4kg
5.3lb
2,4kg
5.3lb
173cm
67.5in
3kg
6.5lb
2,4kg
5.3lb
Head
Tripod
Bag
5kg
11lb
73cm
28.7in
51cm
19.9in
149,5cm
58.3in
174cm
67.9in
3,4kg
7.4lb
MVH500AH
Aluminum 755XB
included
9
variable
variable
fixed
fixed
MVH502A
Scala 1:1 da catalogo.
MVH502AH
55
55
C.O.G.
C.O.G.
FLAT
Scala 1:1 da catalogo.
FLAT
MVH502A Fluid Video Head - 75mm half ball
The 502 fluid head is designed for use with HDSLR cameras and latest
interchangeable lens cameras. It offers professional features such as highperformance variable fluidity and a counterbalance system. The 502 supports
up to 7kg cameras and accessories, with a counterbalance setting designed to
match the weight of the most popular cameras and their accessories as external
monitors, lights or microphones. The 502’s Easy Link attachment points mean
that the weight of accessories can supported directly by the head, rather than by
the camera. The MVH502A has a 75mm half ball video tripod mount.
1 Sliding plate safety release button
2 Pan drag control
3 Leveling bubble
1
3
2
4kg
8.8lb
7kg
15.4lb
15cm
5.9in
1,6kg
3.5lb
504PLONG
1 Pan locking knob
2 Tilt drag control
3 Easy link connectors
MVH502AH Fluid Video Head - flat base
Same characteristics as the MVH502A, but with a flat base mount with standard
3/8” thread. Ideal for tripod/slider/rig/crane application.
3
4kg
8.8lb
7kg
15.4lb
13cm
5.1in
1,7kg
3.7lb
1
504PLONG
2
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
200
1 Tilt locking knob
2 Sliding quick release plate
3 Sliding quick release knob
4 Easy link connectors
150
2
3
4
100
55
50
1
2
4.4
3
6.6
4
8.8
5
11
6
13.2
Payload kg / lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance weight
Safety payload
Leveling bubble
Pan bar
10
75mm half ball (MVH502A) - Flat (MVH502AH)
Fixed fluid cartridge (from 0 to max level)
Fixed fluid cartridge (from 0 to max level)
Fixed @ 4kg (8.8lb)
7kg (15.4lb)
Available
Available
Pan bar attachment
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Available on right and left sides
No
504PLONG Quick Release
85mm (33.2in)
3/8” and 1/4” camera screws + anti-rotation pin
360°
-80° +90°
-20° C +60° C
MVK502C-1 SYSTEM
MVK502AM-1 SYSTEM
4kg
8.8lb
7kg
15.4lb
75cm
29.5in
70,5cm
27.5in
156cm
60.8in
3,8kg
8.4lb
4kg
8.8lb
7kg
15.4lb
87,5cm
34.5in
41cm
16in
185cm
72.2in
Head
MVH502A
Aluminum MVT502AM
Tripod
Mid spreader included
included
Bag
Head
Tripod
Bag
MVH502A, 546BK-1 SYSTEM
MVH502A, 546GB-1 SYSTEM
4kg
8.8lb
7kg
15.4lb
83cm
32.7in
Head
MVH502A
Aluminum 546B
Tripod
Mid spreader included
included
Bag
41cm
16in
164,5cm
64.2in
5,5kg
12.1lb
4kg
8.8lb
Head
Tripod
Spreader
Bag
4,3kg
9.5lb
MVH502A
Carbon Fiber 535
included
7kg
15.4lb
83cm
32.7in
44cm
17.2in
168cm
65.5in
5,5kg
12.1lb
MVH502A
Aluminum 546GB
included
included
11
variable
variable
55
C.O.G.
504HD Fluid Video Head - 75mm half ball
1 Pan drag control
2 Pan locking knob
3 Illuminated leveling bubble
The compact 504HD combines high-performance variable fluidity with a wide
variety of professional features, including a 4-step counterbalance system,
ergonomic positioning of all knobs for tilt, drag and locking on the left side of the
head, illuminated leveling bubble and replaceable pan-bar rosettes. The 504HD
designed to support the latest generation of HD cameras weighing up to 12kg
(26.5lb) and counterbalancing up to 7.5kg (16.5lb). The 504HD has a 75mm half
ball video tripod mount.
1
3
7,5kg
16.5lb
12kg
26.5lb
15,5cm
6in
2,9kg
6.4lb
2
504PLONG
1 Tilt locking knob
2 Tilt drag knob
3 Sliding plate safety release button
4 Easy Link - 3/8’’ thread connection
3
1
2
4
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
100
90
1 Counterbalance adjustment knob
2 Sliding quick release plate
3 Sliding quick release knob
80
70
3
55
40
30
20
10
0
2.5
5.5
5
11
7.5
16.5
10
22
12.5
27.6
1
15
33.1
Payload kg / lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance weight
Safety payload
Leveling bubble
Pan bar
12
2
75mm half ball
Fixed fluid cartridge (from 0 to max level)
Fixed fluid cartridge (from 0 to max level)
Variable 4 steps
0 - 2,5 - 5- 7,5kg (0 - 5.5 - 11 - 16.5lb)
12kg (26.5lb)
Available (illuminated with led)
Available (telescopic)
Pan bar attachment
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Available on right and left sides
Yes, on both sides
504PLONG Quick Release
92mm (35.9in)
3/8” and 1/4” camera screws + anti-rotation pin
360°
-60° +90°
-20° C +60° C
504HD, 536K SYSTEM
504HD, 535K SYSTEM
7,5kg
16.5lb
Head
Tripod
Bag
12kg
26.5lb
88cm
34.6in
40,5cm
15.8in
184cm
71.8in
5kg
11lb
Head
Tripod
Bag
504HD
Carbon Fiber 535
MB MBAG100PN
12kg
26.5lb
84cm
33in
Head
504HD
Aluminum 546B
Tripod
Mid spreader included
MB MBAG100PN
Bag
44cm
17.2in
12kg
26.5lb
85,5cm
33.6in
40cm
15.6in
217,5cm
84.8in
6,1kg
13.5b
171cm
66.7in
6,3kg
13.9lb
504HD
Carbon Fiber 536
MB MBAG100PN
504HD, 546GBK SYSTEM
504HD, 546BK SYSTEM
7,5kg
16.5lb
7,5kg
16.5lb
167,5cm
65.3in
6,3kg
13.9lb
7,5kg
16.5lb
Head
Tripod
Spreader
Bag
12kg
26.5lb
84cm
33in
46,5cm
18.1in
504HD
Aluminum 546GB
included
MB MBAG100PN
13
variable
variable
55
C.O.G.
125
C.O.G.
509HD Pro Fluid Video Head - 100mm half ball
1 Pan drag control
2 Pan locking knob
3 Illuminated leveling bubble
The 509HD fluid head combines ergonomic design features with professional
performance. To help you obtain incredibly smooth camera movements and
great footage, the 509HD has variable fluid drag and a fast, precise, 4-step
counterbalance system that makes it suitable for a wide range of semiprofessional and professional camera setups. The 509HD’s patented Advanced
Balancing Recorder (ABR) allows you to quickly find, store and recuperate
the correct balance position of the plate when using a particular combination
of equipment. The 509HD also features Easy Link connectors for accessory
attachment, an illuminated leveling bubble and replaceable rosettes for pan bar
attachment on both sides of the head. The 509HD has a 100mm half ball video
tripod mount.
12,8kg - 28.1lb (@ 55 C.O.G.)
8,5kg - 18.7lb (@ 125 C.O.G.)
13,5kg - 29.8lb (@ 55 C.O.G.)
9kg - 19.8lb (@ 125 C.O.G.)
17,8cm
6.9in
3,8kg
8.4lb
1
3
2
1 Tilt locking knob
2 Tilt drag knob
3 Sliding plate safety release button
509PLONG
3
1
2
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
250
200
1 Counterbalance adjustment knob
2 Sliding quick release plate
3 Sliding quick release knob
4 Advanced Balancing Recorder
5 Easy Link - 3/8’’ thread connection
150
125
100
55
50
2
5
4
0
1
2.2
2
4.4
3
6.6
2,8
6.2
4
5
6
7
8
9
8.8 11 13.2 15.4 17.6 19.8
4,2
5,6
8,5
9.2
12.3
18.7
10
22
11 12
13
14
24.2 26.5 28.7 30.9
12,8
28.1
1
Payload kg / lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance weight
Safety payload
Leveling bubble
Pan bar
14
3
100mm half ball
Fixed fluid cartridge (from 0 to max level)
Fixed fluid cartridge (from 0 to max level)
Variable 4 steps
0 - 2,8 - 5,6 - 8,5kg (0 - 6.2 - 12.3 - 18.7lb)
9kg (19.8lb)
Available (illuminated with led)
Available (telescopic)
Pan bar attachment
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Available on right and left sides
Yes, on both sides
509PLONG Quick Release with ABR
72mm (28.1in)
3/8” and 1/4” camera screws + anti-rotation pin
360°
-60° +90°
-20° C +60° C
509HD, 545BK SYSTEM
509HD, 536K SYSTEM
12,8kg - 28.1lb (@ 55 C.O.G.)
8,5kg - 18.7lb (@ 125 C.O.G.)
Head
Tripod
Bag
13,5kg - 29.8lb (@ 55 C.O.G.) 87cm
9kg - 19.8lb (@ 125 C.O.G.)
34.2in
40,5cm
15.8in
217,5cm
84.8.in
7,1kg
15.7lb
12,8kg - 28.1lb (@ 55 C.O.G.)
8,5kg - 18.7lb (@ 125 C.O.G.)
13,5kg - 29.8lb (@ 55 C.O.G.)
9kg - 19.8lb (@ 125 C.O.G.)
84cm
33in
44,5cm
17.4in
168,5cm
65.7in
7,3kg
16.1lb
509HD
Head
Aluminum 545B
Tripod
Mid spreader included
MB MBAG100PNHD
Bag
509HD
Carbon Fiber 536
MB MBAG100PNHD
509HD, 545GBK SYSTEM
12,8kg - 28.1lb (@ 55 C.O.G.)
8,5kg - 18.7lb (@ 125 C.O.G.)
Head
Tripod
Spreader
Bag
13,5kg - 29.8lb (@ 55 C.O.G.)
9kg - 19.8lb (@ 125 C.O.G.)
84cm
33in
48cm
18.7in
172cm
67.1in
7,3kg
16.1lb
509HD
Aluminum 545GB
included
MB MBAG100PNHD
15
variable
variable
125
C.O.G.
526 Pro Fluid Video Head - 100mm half ball
The 526 is a professional, heavy duty, fluid head aimed at high-end ENG and
EFP, with a feature set designed to allow cameramen to work quickly and
easily under pressure. For example, the 526’s large control knobs for tilt/pan
lock and tilt drag are all located on the left side of the head for single-handed
adjustment, and all the controls are rubber-padded for better grip. The 526 has
a very precise fluid drag system with three drag level settings (low, medium and
high, numbered 1, 2 and 3 respectively). Drag setting 0 switches off the drag
for snap-pans/tilts. Counterbalance is via a continuously adjustable spring for
different camera weights.
15g
33.1lb
16kg
35.3lb
15cm
5.9in
3,6kg
7.9lb
357PLV
1 Pan locking knob
2 Pan drag control
3 Leveling bubble
3
1
2
1 Tilt locking knob
2 Tilt drag knob
3 Counterbalance adjustment knob
3
1
2
COUNTERBALANCE GRAPH
300
1 Sliding plate safety release button
2 Sliding quick release plate
3 Sliding quick release knob
4 Interchangeable pan bar rosette
Minimum
275
Maximum
250
225
200
1
3
2
175
150
4
125
100
75
50
4
8.8
5
6
7
8
9 10 11 12 13 14 15 16
11 13.2 15.4 17.6 19.8 22 24.2 26.5 28.7 30.9 33.1 35.3
Payload kg / lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance weight
Safety payload
Leveling bubble
Pan bar
16
100mm half ball
0 plus - 3 steps
0 plus - 3 steps
Variable continuos
8 - 15kg (17.6 - 33.1lb)
16kg (35.3lb)
Available
Available (telescopic)
Pan bar attachment
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Available on right and left sides
Yes, on both sides
357PLV
80mm (31.2in)
3/8” and 1/4” camera screws + anti-rotation pin
360°
-70° +75°
-20° C +60° C
526, 545BK SYSTEM
526, 536K SYSTEM
15kg
33.1lb
Head
Tripod
Bag
16kg
35.3lb
86cm
33.8in
43cm
16.8in
218cm
85in
6,9kg
15.1lb
Head
Tripod
Spreader
Bag
16kg
35.3lb
84cm
33in
526
Aluminum 545GB
included
MB MBAG100PN
16kg
35.3lb
84cm
33in
45cm
17.6in
169cm
65.9in
7,1kg
15.7lb
163cm
63.6in
11kg
24.3lb
526
Head
Aluminum 545B
Tripod
Mid spreader included
MB MBAG100PN
Bag
526
Carbon Fiber 536
MB MBAG100PN
526, 528XBK SYSTEM
526, 545GBK SYSTEM
15kg
33.1lb
15kg
33.1lb
47,5cm
18.5in
173cm
67.5in
7.1kg
15.7lb
15kg
33.1lb
16kg
35.3lb
114cm
44.9in
88cm
34.3in
526
Head
Aluminum / Steel 528XB
Tripod
Mid spreader included
MB MBAG120PN
Bag
17
TRIPODS
The Manfrotto video tripod range covers a wide variety of applications and user needs, offering both twin-leg and
single-leg tripods, with traditional video half-bowl or flat-base head attachments, as well as hybrid video/photo
innovations like the MDeVe leveling column. Our tripods are assembled from high-performance components made in
carefully chosen raw materials such as carbon fiber, aluminum, magnesium and high-quality technopolymers. When
choosing the right tripod, key factors to take into account include the camera setup you need to support and the video
head you’ll be matching with the tripod, the specific application and environment in which your kit will be used, and
characteristics such as compactness, extended height, weight and leg angle settings.
MDEVE tripods are where Manfrotto’s video know-how and our long experience in photography meet: our R&D team
realized that video supports could benefit from some of the main advantages of photo tripods. They took the lightweight,
torsion-resistant, single carbon/aluminum tube leg structure of the photo tripod, with its easily extensible center column,
and built a new video-ready 50mm half ball leveling system at the top of the center column. Locked and unlocked via
the (detachable) rotating grip at the bottom of the column, the MDeVe system allows the operator to level the camera
without needing to make micro adjustments to each individual tripod leg.
The result is a tripod that’s as quick to set up as a true photo tripod, but has the fine leveling and torsion resistance
demanded by video. MDeVe tripods are ideally suited to use with lightweight camera equipment and in situations where
set-up speed is of the essence.
Center column with built-in 50mm
half ball locked using the rotating grip
located at the bottom of the center
column. Tilt range: +15°/-15°.
18
Single tube leg profile made of roundsection aluminum or carbon fiber.
Four different leg angle settings.
Quick action lever leg lock system (45°
run).
Rubber feet.
755CX3 MDEVE MAGFIBER VIDEO TRIPOD
755XB MDEVE ALUMINUM VIDEO TRIPOD
Two-stage tripod with a perfect combination of low weight and high load capacity
that comes from the use of carbon fiber and magnesium in its construction.
Designed to withstand rugged use and to support professional lightweight
camcorders, the 755XB is an extremely versatile tripod. Entirely made from
aluminum.
7kg
15.4lb
7kg
15.4lb
63,5cm
25in
46,5cm
18.3in
139cm
54.7in
164mm
64.6in
1,9kg
4.2lb
63,5cm
25in
41,5cm
16.3in
140,5cm
55.3in
TECHNICAL SPECIFICATIONS 755CX3
TECHNICAL SPECIFICATIONS 755XB
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included spike foot shoes
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included spike foot shoes
50mm leveling flat base with 3/8” screw + extendible center column
Yes
Lever locks
By leg selector
4 steps (23° - 47° - 66° - 89°)
No
165mm
65in
2,5kg
5.5lb
50mm leveling flat base with 3/8” screw + extendible center column
Yes
Lever locks
By leg selector
4 steps (23° - 45° - 65° - 88°)
No
19
MPRO tripods unite performance and functionality. A torsion rigidity superior to that of equivalent aluminum twinstrut tripods, an MPRO tripod offers better protection against “backlash” effects at the end of pan movements.
Special carbon fiber tubing and aluminum with a torsional rigidity castings also bring notable weight savings to
the MPRO range. This makes them easy to carry and transport. Another feature worth pointing out is that MPRO
tripods also offer incredibly versatile and speedy height adjustment anywhere, without needing any accessories.
20
75mm bowl (535 version only).
75/100mm screw-in adaptor (536
version only) to hold the different
industry standard half-ball heads.
High-performance Carbon fiber tubes.
Lightweight and resistant magnesium
die castings.
Ergonomic leg angle selector for a quick,
easy and precise angle adjustment.
Quick action ergonomic leg locks.
Retractable spiked feet for in and outdoor
use.
535 MPRO CARBON FIBER 2-STAGE VIDEO TRIPOD
536 MPRO CARBON FIBER 3-STAGE VIDEO TRIPOD
The 3-section, single-tube 535 video tripod offers great stability, high load
capacity and a very useful maximum height. Ergonomic, easy-to-use and
compact, it has a 75mm half bowl for compatibility with mid-range video heads.
Leg tubes are in carbon fiber, while die castings are in magnesium to keep weight
low and performance high. In addition, the 535 has a new leg angle selector,
developed for quick, easy and precise independent leg angle adjustments.
The 4-section, single tube 536 video tripod is incredibly stable, even though
it offers a very high load capacity and a very tall maximum height. Despite its
open height, it’s compact when folded. The single tube structure makes it light
in weight, ergonomic and easy-to-use. Features our new leg angle selector,
developed for quick, easy and precise independent leg angle adjustments.
The half-bowl attachment fits industry-standard 75mm or 100mm half ball
heads; an adaptor is supplied to switch between the two sizes.
20kg
44.1lb
25kg
55.1lb
73,5cm
28.9in
27cm
10.6in
171cm
67.3in
2,3kg
5.1lb
72cm
28.3in
26cm
10.2in
203cm
79.9in
TECHNICAL SPECIFICATIONS 535
TECHNICAL SPECIFICATIONS 536
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included spike foot shoes
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included spike foot shoes
75mm bowl
No
Lever locks
By leg selector
3 steps (23° - 50° - 70°)
No
3,3kg
7.3lb
75/100mm bowl
No
Lever locks
By leg selector
3 steps (23° - 50° - 70°)
No
21
TELESCOPIC TWIN LEG SYSTEMS The new MVT502AM is a lightweight video tripod built with innovative telescopic
twin elliptic tube legs. The two-stage structure makes the tripod more compact and more stable. As a result,
the MVT502AM is a perfect solution for those looking for a tripod that offers transportability without sacrificing
performance.
Made of elliptic aluminum tubes, our new
telescopic leg is the product of extensive
research into lightweight applications;
it allows the tripod to be extra stable.
22
New innovative design reduces the
weight of the system without any loss in
performance.
The two-stage telescopic legs reduce
the size of the tripod when folded.
For easier and safer transportation.
Thanks to the improved clamping
mechanism, the new higher spreader
allows the tripod to be set up faster and
easier.
The 75mm bowl guarantees the perfect
position can be achieved at any angle
between -15° and +15°.
New leg locking system with ergonomic
levers enables the easy locking of the
elliptic telescopic tubing in any position.
Scala 1:1 da catalogo.
FLAT
Scala 1:1 da catalogo.
60/75
FLAT
MVT502AM TELESCOPIC-TWIN LEG TRIPOD
The MVT502AM is a two-stage tripod for lightweight applications. Its telescopic-twin legs are made of elliptical aluminum tubes that help reduce torsion and give the tripod
a good balance of high performance and reduced weight. Other features include a fixed mid-level spreader for increased rigidity and faster set-up, a rubber strap for safer,
easier transportation, and new high-grip soft rubber feet. The MVT502AM’s 75mm half-bowl matches mid-range Manfrotto video heads.
15kg
33.1lb
61,5cm
24.2in
57cm
22.4in
143,5cm
56.5in
1,95kg
4.3lb
TECHNICAL SPECIFICATIONS MVT502AM
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
60/75mm bowl
No
Lever locks
Not setting
19°
Included mid spreader
Included ground spreader
Included spike foot shoes
Yes
No
No
23
The PRO series fits neatly into the PRO range of video tripods: it has an aluminum top casting allowing it to be used
with our professional half-ball video heads with Ø 100mm or 75mm fittings; its aluminum twin-strut legs feature
adjustable locking levers that can be tension-set to guarantee complete locking power even after years of use and
wear; the spiked feet with removable rubber shoes are suitable for any surface from smooth, delicate floors to
uneven ground.
24
Built-in half bowl (Ø 100mm or 75mm)
Mid or ground spreader for improved
tripod stability.
Spreader length regulation.
New spreader attachment.
Rubber shoes guarantee a better grip on
smooth floors.
Newly redesigned collars, integrated
in the overall product ergonomics for
improved rigidity.
545B PRO HEAVY-DUTY VIDEO TRIPOD
545GB PRO HEAVY-DUTY VIDEO TRIPOD
Two-stage, extremely rigid, professional video tripod. Able to carry loads up
to 25kg (55.1lb). The 545B has a die cast aluminum crown with a 100mm
half-bowl (code 319 is available as accessory to convert it to 75mm). The
545’s leg locks are secure and reliable, and spiked feet with rubber overshoes
are provided for solid grounding on both uneven terrain and smooth floors.
The tripod can be used with various dollies.
The 545B has a telescopic mid-level spreader to help set leg angles accurately.
The 545GB is the same as the 545B, except that it has a telescopic ground-level
spreader instead of a mid-level spreader.
25kg
55.1lb
25kg
55.1 lb
69cm
27.2in
30cm
11.8in
154cm
60.6in
3,5kg
7.7lb
69cm
27.2in
32,5cm
12.8in
158,5cm
62.4in
TECHNICAL SPECIFICATIONS 545B
TECHNICAL SPECIFICATIONS 545GB
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included mid spreader
Included ground spreader
Included spike foot shoes
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included mid spreader
Included ground spreader
Included spike foot shoes
100mm bowl
No
Lever locks
By mid spreader
From 30° to 66°
Yes
No
Yes
3,5kg
7.7lb
100mm bowl
No
Lever locks
By ground spreader
From 29° to 63°
No
Yes
No
25
26
546B PRO VIDEO TRIPOD
546GB PRO VIDEO TRIPOD
Two-stage, extremely rigid, professional video tripod, able to carry loads up to
20kg (44lb). The 546B has a die cast aluminum crown with a built-in 75mm
bowl. Leg locks are secure and reliable, and spiked feet with rubber overshoes
are provided for solid grounding on both uneven terrain and smooth floors. The
tripod can be used with various dollies.
The 546B has a telescopic mid-level spreader to help set leg angles accurately.
The 546GB is the same as the 546B, except that it has a telescopic ground-level
spreader instead of a mid-level spreader.
20kg
44lb
20kg
44lb
69cm
27in
30cm
11.8in
154cm
60.6in
3,5kg
7.7lb
69cm
27in
32,5cm
12.8in
158,5cm
62.4in
TECHNICAL SPECIFICATIONS 546B
TECHNICAL SPECIFICATIONS 546GB
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included mid spreader
Included ground spreader
Included spike foot shoes
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included mid spreader
Included ground spreader
Included spike foot shoes
75mm bowl
No
Lever locks
By mid spreader
From 30° to 66°
Yes
No
Yes
3,5kg
7.7lb
75mm bowl
No
Lever locks
By ground spreader
From 29° to 63°
No
Yes
No
528XB PRO HEAVY VIDEO TRIPOD
117B PRO VIDEO TRIPOD
The 528XB is the ideal location tripod, with a massive 50kg (110.2lb) load
capacity. Tubes are made of stainless steel for strength under heavy loads, and
aluminum for reducing the weight. The leg spread is fully adjustable, but also
incorporates a 30° locked position for faster set up and greater strength. The
528XB includes a versatile mid-level spreader, which has telescopic “ratchet”
braces that click into place in each of the preset positions for faster deployment.
Each brace can be individually set, allowing each tripod leg to be separately
positioned.
The 117B features a geared central column that permits a fine adjustment of
the camera height. The base is assembled using stainless steel extension legs
for extreme corrosion resistance and extra long working life. The middle spreader is assembled with aluminum telescopic tubes that make the tripod flexible
and rigid. Rubber feet and retractable metal spikes are included.
50kg
110.2lb
18kg
39.7lb
99cm
39in
73cm
28.7in
148cm
58.3in
7,4kg
16.3lb
94cm
37in
46cm
18.1in
147cm
57.9in
TECHNICAL SPECIFICATIONS 528XB
TECHNICAL SPECIFICATIONS 117B
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included mid spreader
Included ground spreader
Included spike foot shoes
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Included mid spreader
Included ground spreader
Included spike foot shoes
100mm bowl + half ball included
No
Knob locks
By mid spreader
From 25° to 41°
Yes
No
No
173cm
68.1in
5,7kg
12.6lb
Flat base with 3/8” screw + extendible center column
No
Knob locks
By mid spreader
From 10° to 60°
Yes
No
No
27
MONOPODS
fixed
fixed
55
C.O.G.
When shooting space is limited, when the amount and weight
of equipment has to be kept to a minimum, or when set-up
speed is of primary importance, a monopod is often the best
solution to helping support a video camera and reduce camera
shake. Monopods combine flexibility with high performance
and fluidity, and can be useful in a vast range of situations and
locations, many of which would be unsuitable for a tripod.
FLUID MONOPODS are a Manfrotto world-first; a patented
system designed to help videographers obtain superior image
quality from the kind of fluid camera movements unachievable
with a standard monopod. An innovative fluid cartridge is
incorporated in the base of the monopod to make panoramic
rotations of the camera as smooth and judder-free as possible.
The monopod base also has three retractable feet, which give
a firmer footing, helping to keep the camera stable and reduce
unwanted tilt.
MVM500A Fluid Video Monopod with 500 head
The key feature of this monopods family
is the fluid cartridge incorporated into
the base that gives you an incredibly
smooth panning action.
The three retractable feet ensure a firm
footing and a great compactness while
folded.
The MVM500A is a fluid monopod with a specially adapted 500 video head
attached. Combining the flexibility, reduced weight and innovative fluid pan
cartridge of the monopod with the features of the head – its counterbalance
system, tilt fluidity and locking, fast and secure side lock plate system, accessory
Easy Link and pan bar – helps you get better footage from your camera than you
would have thought possible with a monopod. Supplied with retractable feet.
2,4kg
5.3lb
28
5kg
11lb
77cm
30in
200,5cm
78.2in
2,1kg
4.7lb
500PLONG
560B-1 FLUID VIDEO MONOPOD
562B-1 FLUID VIDEO MONOPOD
Compact and lightweight 4-section aluminum monopod with a fluid pan
cartridge and a quick release tilt top with lock knob at the top gives you more
flexible shooting angles and faster camera attachment without sacrificing the
compactness of the monopod. Supplied with retractable feet.
The 562B is a compact and high 4-section aluminum fluid monopod equipped
with a 357PLV sliding camera plate adapter to adjust the camera’s center of
balance. This fluid monopod is ideal for camcorders up to 8kg (17.6lb). Supplied
with retractable feet.
2kg
4.4lb
8kg
17.6lb
65,5cm
25in
166cm
64.7in
0,9kg
1.9lb
200PL-14
69cm
26.9in
193cm
75.3in
1,4kg
3.2lb
357PLV
29
SYMPLA FIG RIG SYSTEM
Hybrid DSLR cameras and ever-smaller, lighter camcorders
with interchangeable lens offer many advantages and
opportunities, but also bring new problems to solve: much of
the latest camera equipment doesn’t have the ergonomic form
needed for steady shoulder-mounted or hand-held footage.
Sympla is Manfrotto’s solution to those problems: a modular
video rig system that extends and complements new cameras,
allows for stable support and framing, and supports essential
accessories. Offering versatility and high performance as well
as comfort and safety, Sympla is designed to be much easier
and faster set up than other solutions. Every component
and assembly can be changed easily and fine-tuned quickly
without any tool, giving you whatever you need to get the shot,
the second you need it. Everything at your fingertip.
One of the key advantages of Sympla is its full compatibility
with our video remote control or the revolutionary range of
HDSLRs camera remotes. The remotes fit Sympla handgrips,
allowing precise control of framing and camera functions
without moving your hands from the grip or your eyes from
the viewfinder, helping you capture stable, usable, creative
footage. And Sympla can quickly be extended: whether you
start from one of our kits, or from single components, you can
quickly build the exact rig you need for the shot.
30
31
MVA511WK-1 Shoulder Mounted Rig
This rig allows support of camera equipment on your shoulder, with swivel-joint handles for perfect control and flexibility. The Shoulder Mounted Rig is ideal for use with
HDSLRs and interchangeable lens camcorders, featuring fast camera connection thanks to the sliding plate with quick release. The Variable Plate is one of the most
important component of the rig. This element permits to quickly adjust the position of the camera in combination with all the other accessories used, as the mattebox.
The video equipment, such as HDSLR or Camcorder, can be easily controlled accessorizing this rig with the new HDSLR Remote Controls (ref. MVR911ECCN pag. 46
and MVR911EJCN pag.48). They put camera functions at your fingertips while letting you keep a firm grip on both handles.
Kit comprises: Shoulder Mount, Shoulder Pad, 300mm Rods (4), Variable Plate, 160mm H-Offset, Adjustable Handles, Spacers for handles (2), Clips (2), Rod Connectors
(2), Light Counterweight, Spacer for Counterweight with adaptor
We recommend: Mattebox MVA512W, Clamp On HDSLR Remote Control MVR911ECCN Joystick HDSLR Remote Control MVR911EJCN.
• Weight: 4kg (8.82lb)
32
MVA525WK Lightweight Shoulder Mounted rig
This rig, is the Manfrotto lightweight solution that allows support of camera equipment on your shoulder, with swivel-joint handles for perfect control and flexibility.
The Lightweight Shoulder Mounted Rig is ideal for use with latest HDSLRs, featuring fast camera connection thanks to RC2 quick release plate. The camera and its lens
can be easily controlled accessorizing this rig with the new HDSLR Remote Controls (ref. MVR911ECCN pag. 46 and MVR911EJCN pag.48). They put camera functions
at your fingertips while letting you keep a firm grip on both handles.
Kit comprises: Shoulder Mount, Shoulder Pad, 300mm Rods (2), 150mm Rods (2), RC2 Mount, 80mm H-Offset, Adjustable Handles, Spacers for handles (2), Clips (2),
Rod Connectors (2), Light Counterweight, Spacer for Counterweight with adaptor.
We recommend: Clamp On HDSLR Remote Control MVR911ECCN Joystick HDSLR Remote Control MVR911EJCN.
• Weight: 3,2kg (7.05lb)
33
MVA512WK-1 FLEXIBLE MATTEBOX SYSTEM
The multi-purpose Flexible Mattebox holds 4x4” filters and protects the lens from stray light, while also permitting fast lens changes. The included Variable Plate component,
with its vertical and lateral micro-adjusters, allows easy and precise alignment of the lens with the Flexible Mattebox. Compatible with all Manfrotto Video Heads.
Kit comprises: 300mm Rods (2), Sympla Flexible Mattebox, Sympla Variable Plate, Clips (2).
We recommend: Lens Support, Remote Controls.
• Weight: 2,44kg (5.4lb)
34
1
Y2
Y1
1
2
2
Y1
MVA513WK-1 Long lens support system
3
The Long Lens Support reduces the vibrations generated while shooting with long lenses and gives a rigid, stable platform for filming with any camera/lens combination.
Compatible with all Manfrotto Video Heads.
Kit comprises: 300mm Rods (4), Sympla Variable Plate, Sympla Lens Support, Sympla Body Support, Sympla V-Offset, 150mm Rods (2) and Clips (2).
We recommend: Offset, Shoulder Pad, Adjustable Handles.
121
• Weight: 2,91kg (6.4lb)
35
MVA525W RC2 MOUNT
The RC2 mount is a lightweight solution in order to combine video equipment
such as HDSLRs or light camcorders, with rail system. Thanks to its design, it is
possible to adjust the operating height of the camera in two different positions,
depending on the size of the body and the dimension of the lens. The RC2 quick
release plate allows fast and secure connection between the camera and the rig.
•
•
•
•
Camera attachment: Manfrotto RC2 quick release plate
Material: Aluminum
Load Capacity: 5kg (11lb)
Weight: 0,29kg (0.63lb)
MVA513W Fixed Plate
MVA515W Variable Plate
The Fixed Plate slides and holds the camera on Sympla rails for front-rear
positioning. A single, easy to use repositionable ratchet lock blocks movement.
No tools are required for plate adjustments.
The Variable Plate allows precise, fast camera positioning on 3 axes of
movement. The plate has a repositionable ratchet quick-lock for each axis, and
an intuitive fingertip control each for vertical and lateral geared micro-adjustments.
The camera is held safely in place even before its position is locked down,
allowing for single-handed adjustments and fine-tuning. The Variable Plate offers
the versatility essential for alignment of different camera and lens combinations
with the Sympla Flexible Mattebox, and for comfortable use of viewfinders and
accessories. No tools are required for plate adjustments.
• Camera attachment: Manfrotto 504PLONG quick release video plate.
• Accessory attachments: 2 x 3/8” Easy Link
• Underside: 2 x female 3/8” threads (for monopod, tripod or video
head QR plate)
• Maximum lateral adjustment: +- 18mm (0.708”)
• Height between the top of the plate and the rods: 37,7mm (1.48”)
• Materials: durable aluminum and steel construction
• Load capacity: 5kg (11lb)
• Weight: 0,96kg (2.2lb)
36
• Camera attachment: Manfrotto 504PLONG quick release video plate.
• Accessory attachments: 2 x 3/8” Easy Link
• Underside: 2 x female 3/8” threads (for monopod, tripod or video
head QR plate)
• Maximum lateral adjustment: +- 18mm (0.708”)
• Minimum Height between the top of the plate and the rods: 37,7mm (1.48”) /
Maximum Height between the top of the plate and the rods: 55,7mm (2.19”)
• Materials: durable aluminum and steel construction
• Load capacity: 5kg (11lb)
• Weight: 1,16kg (2.55lb)
MVA518W ADJUSTABLE HANDLES
Sympla Adjustable Handles are fitted on a Universal Mount by two arms that
can be angled independently. The handles are mounted on pivoting ball joints
for easier adjustment: a twist of the single locking dial on each handle loosens
or blocks all movement, allowing them to be rotated freely and quickly set at the
exact position and angle required. The handles can be set in customary vertical
or near-vertical positions, but also horizontally like motorbike handlebars. When
a Sympla rig is mounted on a video head, the handles can be used as double
pan bars.
Thanks to the Universal Mount, the Adjustable Handles can be easily removed
and inverted to the upside down configuration.
The PVC-free Adjustable Handles are supplied with two metal spacers that can
be fitted to lengthen the arms. The same spacers also adapt the handles for use
with Manfrotto’s clamp and joystick remote control units.
• Weight: 0,9kg (1.98lb)
MVA523W-1 Rods - 150mm
MVA520W-1 Rods - 300mm
A pair of 150mm (5.9”) short Sympla rails, including 1/2”-13UNC screw
junctions, with standard 15mm (0.59”) diameter.
A pair of 300mm (11.8”) long Sympla rails, including 1/2”-13UNC screw
junctions, with standard 15mm (0.59”) diameter.
• Weight: 0,1kg (0.22lb)
• Weight: 0,18kg (0.4lb)
37
2 precision-machined aluminum holders
for 4x4” photographic filters (1 fixed
holder, 1 rotating holder for polarisers).
Elasticated textile lens seal fits common
lens diameters.
MVA512W Flexible Mattebox
The Sympla Flexible Mattebox is designed for cameras with interchangeable lenses; fitted on a Universal Mount, it slides backwards and forwards along Sympla rails, and
has 50mm (1.96”) of vertical travel so that it can be aligned with lenses of different lengths and heights. The mattebox has an elasticated textile lens seal that fits common
lens diameters, and is built around a 90° swivel joint, which rotates the mattebox out of the way for fast lens changes. The weight of the Flexible Mattebox is fully supported
by the Sympla rails (not by the camera lens) reducing stress on the camera’s easily-damaged lens mount. Two 4x4” filters can be held in front of the lens –one of the filter
holders rotates through 360 degrees, to allow a polarising (or graduated) filter to be angled correctly.
The concertina rubber light hood is opened or closed, partially or fully, in an instant. More versatile than the traditional French flag design, it can shield unwanted directional
glare from any angle without blocking light from the rest of the scene; in many cases, that can make a direct difference to the f-stop that can be used. Because the hood
is flexible in length, it’s universally compatible with lenses from wide-angle to tele. It packs flat for transportability and, when open, protects the lens against knocks and
scrapes. Being made of rubber, it won’t hurt anyone who accidentally bumps into it… which means it’s much safer for use in crowded places or close to sporting events.
Another benefit of the flexible hood is that it can be used when shooting at an angle through glass: position the camera and extend and angle the hood so it forms a seal
against the glass, thereby cutting out reflections. Repositionable ratchet locks on all movements.
• Weight: 1,1kg (2.42lb)
The hood opens to various lengths depending on light and lens angles
The hood can shield against glare from any specific direction without blocking light from other angles
38
MVA511W-1 PADDED SHOULDER MOUNT
MVA524W V-OFFSET
The aluminum shoulder mount is assembled together with the Universal Mount
in order to offer both, sturdy connection with the rods and lightness. The padding
is developed to guarantee the best comfort and ergonomics in all Sympla
configurations. A 3/8’’ thread is available to be used with a counterweight so the
front-mounted load can be properly balanced.
We recommend: Counterweight MVA521W, Light Counterweight MVA521L,
Spacer for Counterweight MVA521.
The V-Offset is used when a large height difference needs to be bridged, for
example when using a very long tele lens with a tall front lens element.
• Weight: 0,63kg (1.4lb)
• Weight: 0,5kg (1.1lb)
MVA521W Counterweight
MVA521L LIGHT COUNTERWEIGHT
Each counterweight weighs 1,6kg (3.5 lbs), and screws securely on to the
SYMPLA Shoulder Pad via 3/8” thread. Counterweights can also be stacked to
offset very unbalanced loads.
We recommend: Spacer for Counterweight MVA521.
Each counterweight weighs 0.8kg (1.8lbs), and screws securely on to the
Sympla Shoulder Pad via 3/8” thread. Counterweights can also be stacked to
offset very unbalanced loads.
We recommend: Spacer for Counterweight MVA521.
• Weight: 1,6kg (3.5lb)
• Weight: 0,8kg (1.8lb)
160mm - 6,4in
80mm - 3,2in
MVA519W 160mm H-OFFSET
MVA519S 80mm H-OFFSET
The H-Offset is normally used to join an off-center Shoulder Mount to a set of
rails directly in front of the camera operator, so that the camera viewfinder or
LCD screen can be more comfortably positioned and the weight of the camera
and rig more ergonomically distributed.
The H-Offset is normally used to join an off-center Shoulder Mount to a set of
rails directly in front of the camera operator, so that the camera viewfinder or
LCD screen can be more comfortably positioned and the weight of the camera
and rig more ergonomically distributed.
• Weight: 0,26kg (1.39lb)
• Weight: 0,2kg (0.44lb)
39
MVA522W Fig Rig - Sympla Version
The Sympla version of the Fig Rig has a Universal Mount in the center of the
wheel so that Sympla rails can be fitted, allowing other components and kits
such as the Long Lens Support or Flexible Mattebox to be attached.
• Weight: 1,19kg (2.62lb)
MVA522 FIG RIG - SYMPLA ADAPTOR
Starting from standard Fig Rig, this accessory allows the user to assemble an
Universal Mount in the center of the wheel so that Sympla rails can be fitted.
• Weight: 0,13kg (0.29lb)
40
MVA517W Universal Mount
The Universal Mount has an “open hook” design, which allows it to be inserted
and hung on the Sympla rails from below, even between other elements that
have already been positioned. Because it’s self-supporting even when unlocked,
it stays safely attached to the rails at all times. A single, repositionable locking
lever conveniently blocks the Universal Mount solidly against both rails with one
movement. The Universal Mount is extremely versatile, thanks to its 4 x 3/8”
female threads and 2 x 1/4” female threads, which can be used to attach arms,
adaptors and other components and accessories.
• Construction: aluminum fusion for reliability and robustness.
• Weight: 0,29 kg (0.63 lbs)
MVA516W BODY SUPPORT
The Sympla Body Support has a flat rubber-coated bar that can be raised until it rests solidly against the underside of your camera body in order to stop it from vibrating
when the lens L-bracket is being used to connect the camera to Sympla. A repositionable ratchet locking lever blocks height adjustment.
• Height range: 0 to 30mm (1.18”). For a greater height range, an additional Sympla V-Offset can be used.
• Weight: 0,33kg (0.73lb)
MVA514W LENS SUPPORT
The Sympla Lens Support has a rubber-coated V-profile element that can be raised until it rests solidly against the lens in order to stop it from vibrating when the lens
L-bracket is being used to connect the camera to Sympla. A repositionable ratchet locking lever blocks height adjustment.
• Height range: 0 to 30mm (1.18“). For a greater height range, an additional Sympla V-Offset can be used.
• Weight: 0,33kg (0.73lb)
41
MVA500 Easy link connectors
Easy Link 3/8” connector to allow an external monitor or other accessory equipment to be fitted. It allows to support an external monitor or other accessories. Suitable
for bridging heads and Sympla plates.
• Weight: 0,02kg (0.04lb)
MVA520 CONNECTORS FOR RODS
Aluminum red anodized connectors for rods. They feature a ½’’ - 13UNC screws in order to precisely connect two different rods.
• Weight: 0,04kg (0.09lb)
MVA521 extension tubes for counterweight
Aluminum spacer that moves the counterweight further back which effectively decreases the weight in front of the shoulder. It provides more balanced to the rig making
shooting easier and more stable.
• Weight: 0,06kg (0.13lb)
42
MVA518EXT Extensions for handles
These machined aluminum spacers can be easily fitted on the adjustable handles to lengthen the arms. The same spacers also adapt the handles for use with Manfrotto
clamp and joystick remote control units (ref. MVR911ECCN pag. 46 and MVR911EJCN pag.48).
• Weight: 0,09kg (0.2lb)
MVA511P PADDING FOR SHOULDER MOUNT
Removable padding for shoulder mount. Developed to guarantee the best comfort and ergonomics in all Sympla configurations. It can be fitted with both, MVA511W-1
and MVA511W.
• Weight: 0,06kg (0.13lb)
43
FIG RIG
The Fig Rig is more than just a steady support. It is a frame on which to build your system. Your camera has only
one hot-shoe for accessories, limiting you to one light or one monitor. With the Fig Rig, you can mount any number
of accessories that are necessary for today’s cameras. Customize the Fig Rig to your liking. Manfrotto provides all
the tools to allow you to create your own supporting system.
Each side of the camera bar is threaded
with one 1/4”, 3/8” and 5/8” hole for
additional accessory mounting.
44
A non-slip rubber pad provides stability
when using the Fig Rig on a flat surface
such as a table, floor or railing.
Supplied with a 501PL sliding QR plate
allowing you to position and balance
your camera. The plate system can be
switched out with a variety of Manfrotto
plate assemblies to best match your
camera.
595CLA FIG RIG CLAMP
Clamp specifically designed for the Fig Rig. Supplied with 1/4” and 3/8” screws,
and female 1/4”-3/8” adapter.
On-camera lights and monitors:
position your light or monitor anywhere
around your camera, freeing you up to
take it off your hot-shoe.
Microphones: mount your shotgun mic
anywhere around the camera.
595B FIG RIG
After years of using the Fig Rig on his award-winning films, Mike Figgis brought his
idea to Manfrotto. An idea that is non-traditional in design, but purely simple and
effective. The only modular system in the world to smoothly support the DV camera
and act as a frame to mount all the accessories – including zoom controllers,
mics, mixers, lights, monitors, arms...
A circular frame with a crossbar to mount most mini DV cameras, the Fig Rig
becomes part of the body to produce smooth, steady travelling shots.
It is this very fact which is the secret to the Fig Rig. As the operator walks,
his/her muscles and tendons absorb all the shocks, transferring only fluid
movements to the camera. As there are no straps or harnesses attached to
the Fig Rig, quick and wide movements can be made within the same shot,
from ground-level to overhead, in one smooth movement. The camera,
accessories and operator become one, allowing you to film scenes quickly and
unobtrusively. With the Fig Rig your creativity is virtually limitless.
Low-angle stability: quickly mount
the Fig Rig to any 5/8” stud for either
temporary storage of stable low-angle
shots.
MICC1 MICROPHONE CLIP
MICC2 MICROPHONE SPRING CLIP
Standard type microphone clip.
Universal type microphone clip.
Grabs microphones from diameter 20 to 35mm (0.8 to 1.4in).
MICC4 UNIVERSAL SHOCK MOUNT
MICROPHONE HOLDER
MVA522 FIG RIG - SYMPLA ADAPTOR
Rubber dampening system to absorb vibrations. Swiveling yoke has 3/8”
threaded hole.
Starting from standard Fig Rig, this accessory allows the user to assemble an
Universal Mount in the center of the wheel so that Sympla rails can be fitted.
45
REMOTE CONTROLs
Manfrotto remote control units put the most important commands of market leading video cameras, HDSLRs and
lenses at your finger-tips. The range includes the world’s first true electronic HDSLR remote controls - connected to
the camera body via USB cable. They directly interface with camera and lens firmware protocols for optimum control
over functions including focus, record start & stop, photo/video switching and shutter release, live view, digital zoom,
aperture and exposure, ISO and more besides. Remote control unit firmware can be updated via USB.
Our remote control range includes both pan-bar and clamp-on models:
- pan-bar versions fit directly on Manfrotto fluid video heads and allow the cameraman to operate both head
movement and camera features. He commands with one hand without having to touch the camera itself, which
helps eliminate camera shake.
- Clamp-on versions are incredibly compact and can be attached to tubes, pipes, tabletops, Fig Rigs, handlebars
and more. By extending the USB cable between the camera and the remote, clamp-on versions can be ideally suited
for longer distance control, as slider or crane applications.
Both types of remote control are compatible with SYMPLA rigs and our Bridging TechnologyTM head range.
REMOTE CONTROLS FOR HDSLR A brand new range of Manfrotto remote controls for Canon HDSLRs promises a real
innovation in the field of HDSLR filming – electronic remote control that works by interfacing with camera and lens
firmware.
MVR911ECCN CLAMP-ON HDSLR
REMOTE CONTROL for Canon
By interfacing directly with camera protocol via USB, the clamp-on electronic
remote allows focus operations and main camera functions to be controlled
from an extremely compact unit that attaches to a Sympla grip or other bar/pipe,
remotely and without direct contact with the camera lens. This means lenses
can be swapped easily without adjustment, camera movement is reduced to a
minimum, and one-man camera operation is easier. In- and out- focus points
and focusing speed can be set, auto-focus used, recording started & stopped,
still images taken, and more besides. Fingertip control of key camera functions
without moving the hand from the Sympla handles makes support more stable
and secure.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3-step, ultra-precise focus speed
Fixed or variable focus control modes
Customizable focus speed limit
Focus Memory settings
Live View control
Auto Focus control
Live View Digital Zoom control
Video recording start/stop
Photo shutter release
Remote control battery status
Customizable focus direction
Recording LED
Video and Photo LED
Clamp fits the spacer supplied with Sympla Adjustable Handles, or round
tubes/pipes/bars/pan bars between 12mm (0.47”) and 23mm (0.90”)
in diameter
Check the chart on the Manfrotto Web site for updates and new compatible
cameras.
46
FRONT
•
•
•
•
•
Autofocus
Live View and Focus Memory 1
Digital Zoom and Focus Memory 2
Rec/Stop (video) and Shutter release (photo)
Focus knob
Left SIde
RIGHT SIde
• Focus speed limit dial
• Focus mode switch – variable or fixed
• On / Off switch
Top SIde
BACK
• USB connection - to camera USB port.
• Extended length of supplied cable: 50cm
• Power connection to battery housed in lower
shell of the clamp
• Battery housing (2 x AAA)
47
MVR911EJCN JOYSTICK HDSLR DELUXE
REMOTE CONTROL for Canon
The Deluxe Remote Control is designed to be used as one of the hand grips of
a Sympla shoulder support, where it means that a single camera operator can
properly support the weight of the camera and rig to ensure smooth, accurate
framing and movement, while also controlling all camera functions, without
removing either hand from the rig. The Deluxe version can also be used handheld and away from the camera and its support, it can be attached to video head
pan bars or set up in any number of alternative configurations.
It electronically controls focus and both main and advanced camera operations
and settings. The LCD screen on Manfrotto’s Deluxe version remote relays
general information from the camera, such as battery charge level, white balance
temperature and memory card status – especially useful if the camera’s on-body
screen is inaccessible.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3-step, ultra-precise focus speed
Fixed or variable focus control modes
Customizable focus speed limit
Focus Memory settings
Live View control
Auto Focus control and Auto Focus point selection
Live View Digital Zoom control
Video recording start/stop
Photo shutter release
Remote control and camera battery status
Customizable focus direction
ISO
Shutter speed
Aperture
Colour temperature
Exposure level
Check the chart on the Manfrotto Web site for updates and new compatible
cameras.
48
FRONT
BACK
LEFT SIDE
RIGHT SIDE
• Display screen
(see schematic diagram)
• Focus knob
• Autofocus and Focus Memory 1
• Digital Zoom and Focus Memory 2
• Autofocus joystick
• Photo / Video mode switch
• Live view
• Function lock and backlight
• Focus speed limit
and Menu set-up dial
• Rec/Stop (video) and
Shutter release (photo) button
• USB connection - to camera
USB port. Extended length
of supplied cable: 50cm
• On/Off switch
• Batteries (4 x AA) housed
in handgrip
L1 L2 L3 L4
L5
L6 L7
L10
L9
L8
2
LCD screen
• L1. CAMERA MODE DIAL
• L2. EXPOSURE LEVEL INDICATOR
• L3. CAMERA BATTERY CHECK
• L4. CAMERA MODE
• L5. VIDEO MODE
• L6. REMOTE CONTROL BATTERY CHECK
• L7. APERTURE INDICATOR
• L8. SHUTTER SPEED
• L9. COLOR TEMPERATURE INDICATOR
• L10. ISO INDICATOR
49
REMOTE CONTROLS FOR CamCORDERs Manfrotto renews and extends the family of accessories built for the latest
cameras (JVC’s GY-HM600 and GY-HM650 series, and the eagerly anticipated Blackmagic Cinema Camera)
through new restyled remote controls. A new family of renovated products in terms of ergonomics and design,
compatible with all protocols and applications. Manfrotto Remote Control units put the most important commands
of market-leading video cameras and lenses at your finger-tips.
KEY FEATURES
• Quick-lock fastening clamp with steel core
• Anti-slip soft touch finishing
• Heavy-duty, anti-scratch, dirt-repellent
polycarbonate film keyboard
• Wide-rotation (+-50°) Multispeed Zoom/Focus
knob
• Direct adjusting of maximum zoom speed
• Functional LEDs
KEY BENEFITS
• Quick fastening on the pan bar
• “Fast zoom” and “Max speed” controls allow for quick camerasetup
• Wide and smooth zoom control
50
12 to 23mm / 0,47” to 0,90” round
tube/pipe/bar grippable diameter.
Anti-scratch. Dirt-repellent keyboard.
Zoom / Focus knob.
Quick lock
Zoom Speed limit.
Remote Control can be set-up for LANC
(Canon/Sony) and Panasonic cameras.
MVR901ECPL CLAMP-ON REMOTE CONTROL
MVR901ECLA LANC REMOTE CONTROL
Remote control can be set-up for Lanc (Canon/Sony) and Panasonic cameras.
Advanced remote control for Lanc (Canon/Sony) cameras.
•
•
•
•
•
•
Lanc/Panasonic switch
Stand-by push button (for Lanc only)
REC/STOP push button
Multi-speed Zoom knob
REC/STOP LED (for Lanc only)
Zoom direction knob (by software)
•
•
•
•
•
•
Stand-by push button
REC/STOP push button
Zoom and focus direction knob (by software )
Multi-speed Zoom and Focus knob
Max-speed zoom potentiometer
Rec, Zoom and Focus indicator LED’s
MVR901ECEX CLAMP-ON REMOTE CONTROL
521PFI FOCUS AND IRIS REMOTE CONTROL
Remote control compatible with Sony PMW EX-family cameras.
Remote control for setting Focus and Iris on Panasonic cameras.
•
•
•
•
•
•
•
REC/STOP push button
Zoom direction switch
Multi-speed Zoom knob
Max-speed Zoom potentiometer
RET push button (plays back latest 5s)
Power indicator LED
Fast zoom push buttons
521CFI ZOOM REMOTE CONTROL
Remote control for ENG lens (Canon and Fujinon).
•
•
•
•
•
•
REC/STOP push button
Zoom direction switch
Multi-speed Zoom knob
Max-speed Zoom potentiometer
RET push button
REC indicator LED
•
•
•
•
•
Focus knob
IRIS knob
Focus and IRIS Auto/Man switches
Focus and IRIS direction switches Focus limits setup
Key to symbols
SONY - CANON
SONY EX
PANASONIC
ENG LENS
51
REMOTE CONTROLS FOR PAN BARS The Pan Bar version of the RC family has been totally restyled by focusing on their
ergonomics, setup and new functionalities of the cameras. Thanks to innovative solutions, refined layouts and a through
study of materials, all new RC models perfectly balance lightness, sturdiness and fluidity as required by professionals.
In order to pursue innovative and eco-friendly solutions, PVC-free handle have been introduced for the first time.
KEY FEATURES
• Aluminum fixing rosette, compatible with Manfrotto video heads
• Accessory clamp for attaching to any pan bar
• Anti-slip softouch finishing
• PVC-free grip
• Heavy-duty, anti-scratch, dirt-repellent polycarbonate film keyboard
• Wide-rotation (+-40°) multi-speed Zoom/Focus knob
• Direct adjusting of maximum zoom speed
KEY BENEFITS
• Wide range of fastening solutions
• Wider Zoom/Focus knob, for better control
• A through set of controls and precision mechanics for a smooth and customizable zooming and focusing
• IRIS remote control for enabled cameras
Rotatable pan bar.
52
Direct coupling with Manfrotto heads for
maximum rotation control.
Direct adjusting of maximum zoom speed.
PVC-free “high-textured” handle.
Wide and ergonomic Zoom/Focus knob.
MVR901EPLA PAN BAR REMOTE CONTROL
MVR901EPEX PAN BAR REMOTE CONTROL
Pan-bar remote control for cameras with Lanc (Sony and Canon).
Remote control with standard pan bar for Sony PMW EX-family cameras
•
•
•
•
•
•
•
•
REC/STOP
Push Button
Max-speed Zoom potentiometer
Stand-by push button
RET push buttons (play back latest 5s)
IRIS Push Button
REC, Zoom and Focus indicator LED’s
Zoom and focus direction knob
(by software)
• Multi-speed Zoom and Focus knob
• Focus/Zoom switch
• Auto/Man Focus switch
•
•
•
•
•
•
•
522P FOCUS AND IRIS REMOTE CONTROL
524CFI REMOTE CONTROL
Remote control with standard pan bar for Panasonic cameras.
Remote control with standard pan bar for ENG lens (Canon and Fujinon).
• REC/STOP push button
• Multi-speed Zoom knob
• Preset Zoom speeds (with extra battery)
•
•
•
•
•
•
522AV ADAPTOR CABLE FOR AV-R SONY CONNECTOR
523RC RAIN COVER
Made for video cameras with the AV-R plug, the 522AV converts the possibility
to connect to these type of cameras all the Manfrotto remote controls.
Waterproof cover for Manfrotto remote control supplied with a crystal clear
vinyl panel allows the viewing of the remote control button during the shooting
session. The cover slips quickly over the remote pan bar to protect it from rain
or sudden showers.
REC/STOP push button
Zoom direction switch
Multi-speed Zoom knob
Max-speed Zoom potentiometer
RET push button (plays back latest 5s)
Power indicator LED
Fast zoom push buttons
REC/STOP push button
Zoom direction switch
Multi-speed Zoom knob
Max speed Zoom potentiometer
RET push button (plays back latest 5)
REC indicator LED
524 ADAPT ENG LENS ADAPTER CABLE
This optional 10cm (3.9in) adapter cable allows you to convert the 8-pin 524CFi
and 521CFi Remote Control cable to a 12-pin configuration found on some
Fujinon ENG lenses.
MVR901APCL PAN BAR CLAMP ADAPTOR
Manfrotto attachment, casting teeth.
Clamp Range: round tube 19 to 25mm.
Quick-fastening system.
522SCA REMOTE CONTROL CABLE STANDARD
2.5mm male/male jack coiled cord cable measuring 140cm (55in) when
extended, supplied as standard with all the units.
53
ALTERNATIVE SUPPORTS
Manfrotto hydrostatic arms, clamps and other alternative
supports and accessories are fundamental video support
“tools” needed to create the perfect supporting solution in
every situation.
814-1 MINI HYDROSTATIC ARM
A small and incredibly powerful arm (max load is 3,5kg - 7.7lb) that spans 13cm
(0.4in). The pivoting pins are 1⁄4” and 3/8” male threaded with one adjustable
platform ring offering a larger footprint for the equipment being supported by
the arm.
3,5kg
7.7lb
819-1 SMALL HYDROSTATIC ARM
823 MEDIUM HYDROSTATIC ARM
This arm spans 18cm (7.1in) and can support up to 2,2kg (4.8lb). The 819-1 is the
ideal companion for attaching a video monitor to a camera or using as a flag support.
The pivoting pins are 1⁄4” and 3/8” male threaded with one adjustable platform
ring offering a larger footprint for the equipment being supported by the arm.
This is the first arm that features 5/8” male and 3/8”+1/4” female thread pins to
support larger and heavier items. One of the two pins is hex shaped to marry
perfectly with our Super Clamp. With a total length of 23,5cm (9.3in), the 823
is ideal to position LCD monitors, lighting fixtures or cameras virtually anywhere.
2,2kg
4.9lb
0,55kg
1.2lb
0,2kg
0.5lb
4kg
8.8lb
244RC VARIABLE FRICTION ARM WITH QUICK RELEASE PLATE
143RC MAGIC ARM WITH QUICK RELEASE PLATE
Articulated arm with large locking knob. Variable friction and locking of arm obtained
by adjusting the knob. Supplied with quick release camera plate with secondary
safety lock based on the 200PL-14 camera plate mechanism. Ideal for mounting
a video camera exactly at the angle you need it. Fits any 5/8” female socket,
works especially well with Super Clamp 035C.
Your extra arm in the studio. One lever locks three pivot points. Supplied with a
quick release camera plate with secondary safety lock based on the 200PL-14
system. Ideal for mounting a camcorder exactly at the angle you need it.
Fits any 5/8” female sockets, works especially well with Super Clamp 035C.
4kg
8.8lb
54
0,2kg
0.5lb
1,1kg
2.4lb
200PL-14
035C SUPER CLAMP
386BC NANO CLAMP
This universal clamp can be securely mounted on any tube from 13 to 45mm
(0.5 to 1.8in). Attachment is 5/8” hexagonal socket, plus 1/4” female thread.
The new Manfrotto small size clamp. Its reduced size is the most important plus:
the Nano Clamp is 4kg (8.8lb) of payload in 110g (2.4lb) of weight and the right size
for any pocket.
The Nano Clamp is also a full pack of new technological advances:
- a new patented unexposed thread system
- a new high friction tape which improves the grip
- high performance aluminum
- pull and lock aluminum handle
- unique surface design that was studied on the smallest surface to be able to grip
round or flat tube/pole surface.
The clamp comes with a 1/4”-3/8” female thread and 1/4”-3/8” adapter.
15kg
33.1lb
0,5kg
1.1lb
4kg
8.8lb
0,1kg
0.2lb
234RC MONOPOD QUICK RELEASE TILT TOP
Tilt head with quick release camera plate system and secondary safety
lock.
2,5kg
5.5lb
6cm
2.4in
0,3kg
0.6lb
200PL-14
241FB PUMP CUP WITH FLAT BASE
241 PUMP CUP
Suction cup for lightweight video cameras. The 60mm (2.4in) diameter disc with
a 3/8” W male thread is built in the pump cup and enables you to mount most
of Manfrotto’s heads.
Suction cup for small equipment.
Diameter: 150mm (5.9in).
0.6kg
1.4lb
1.2kg
2.6lb
037 CAMCORDER MOUNTING STUD
MVA500 EASY LINK CONNECTORS
Reversible stud with 3/8” and 1/4” designed for mounting camcorders on Super
Clamp 035C.
Easy Link 3/8” connector to allow an external monitor or other accessory equipment to be fitted. It allows to support an external monitor or other accessories.
Suitable for bridging heads and Sympla plates.
0.04kg
0.09lb
0.02kg
0.04lb
55
SYMPLA
ACCESSORIES
500PLONG VIDEO CAMERA PLATE
HEAD ACCESSORIES: the Manfrotto head accessory system
includes a wide range of products that satisfy all the customer
needs in terms of camera attachment and customized
pan bar. All the Manfrotto plates are made of aluminum
with a travelling distance up to 140mm (5.5in). Also the
Manfrotto pan bars are assembled with aluminum tubes with a
maximum extension of 58cm (22.8in).
Sliding camera plate, suitable for all Bridging TechnologyTM Manfrotto Video Heads.
Originally supplied with the Manfrotto Video Heads MVH500A and MVH500AH.
Supplied with 1x1/4’’, 1x3/8’’ camera screws and anti-rotation pin.
Dimensions: 120x10,7x50mm (4.7x0.4x2in).
501PLONG VIDEO CAMERA PLATE
The long version of the standard plate, that has a laser engraved scale (110mm),
features a variable VHS pin position. This can be moved along the length of the
plate. Supplied with 2 x 1/4’’ and 2 x 3/8’’ camera fixing screws.
Dimensions: 140x11x50 mm (5.5x0.4x2in).
323 RECTANGULAR VIDEO QUICK RELEASE ADAPTER
This quick release adapter gives you the freedom to remove the camera from
the head without detaching it from the plate and put it on any other support.
Supplied with 1/4” camera screw. Dimensions: 73,7x26,5x67,5mm (2.9x1x2.7in).
504PLONG VIDEO CAMERA PLATE
577 VIDEO QUICK RELEASE ADAPTER
Sliding camera plate, suitable for all Bridging TechnologyTM Manfrotto Video Heads.
Originally supplied with the Manfrotto Video Heads MVH502A, MVH502AH and
504HD. Supplied with 2x1/4’’ and 2x3/8’’ camera screws and anti-rotation pin.
Dimensions: 140x10,7x56mm (5.5x0.4x2.2in).
This quick release adapter gives you the freedom to remove the camera from
the head without detaching it from the plate and put it on any other support.
Supplied with 1/4” and 3/8” camera screws.
Dimensions: 90x23,5x100mm (3.5x0.9x3.9in) - 20mm (0.8in) travel.
509PLONG VIDEO CAMERA PLATE
357 ADAPTER
Sliding camera plate, suitable for Manfrotto Video Heads. This plate works
together with the new ABR (Advanced Balancing Recorder) system, thanks to a
special built-in index.Originally supplied with the Manfrotto Video Head 509HD.
Supplied with 2x1/4’’ and 2x3/8’’ camera screws and anti-rotation pin.
Dimensions: 140x10,7x56mm (5.5x0.4x2.2in).
This quick release adapter gives you the freedom to remove the camera from the
head and put it on any other support. Supplied with 2x1/4” and 2x3/8” camera
screw. Dimensions: 140x22x99mm (5.5x0.9x3.9in) - 80mm (3.1in) travel .
357PLV VIDEO CAMERA PLATE
200PL-14 VIDEO CAMERA PLATE
This standard sliding plate is supplied with 2x1/4” and 2x3/8” camera fixing screws.
Dimensions: 140x10,7x56mm (5.5x0.4x2.2in).
This standard plate is supplied with 1/4” camera fixing screw.
Dimensions: 53x11,2x42,3mm (2.1x0.4x1.7in).
357PLONG VIDEO CAMERA PLATE
501PL VIDEO CAMERA PLATE
This standard sliding plate is supplied with 1/4” and 3/8” camera fixing screws.
Dimensions: 90x11x50mm (3.5x0.4x2in).
56
This long version of the standard plate allows perfect balance for camcorders with
unusual weight distribution caused by long telescopic lenses or heavy batteries.
Supplied with 2x1/4” and 2x3/8” camera screws.
Dimensions: 210x11,1x56mm (8.3x0.4x2.2in).
500BALL100MM HALF BALL
500BALLSH 100MM SHORT HALF BALL
Half ball for leveling video heads on video tripod.
Length 17cm (6.7in). Attachment: 3/8” male thread.
The 500BALLSH comes complete with a short locking handle to mount all
Manfrotto flat-base heads to the 529B Hi-Hat.
Length 12,5cm (4.9in). Attachment: 3/8” male thread.
520BALL 75MM HALF BALL
520BALLSH 75MM SHORT HALF BALL
Half ball for leveling video heads on video tripods provided with 75mm bowl.
Length 16cm (6.3in). Attachment: 3/8” male thread.
The 520BALLSH comes complete with a short locking handle to mount all
Manfrotto flat-base heads to any 75mm bowl tripod including the 529B Hi-Hat
(with optional adapter 319).
Lenght 11,5cm (4.5in). Attachment: 3/8” male thread.
319 100MM TO 75MM ADAPTER
325N VIDEO HEAD BOWL ADAPTER
Converts all Manfrotto 100mm bowl tripods into a 75mm bowl.
Adapter system to connect a 75 or 100mm half bowl video head to a flat base
tripod.
MVA060T 75MM TO 60MM ADAPTER
500HLV PAN BAR
Converts all Manfrotto 75mm bowl tripods into a 60mm bowl.
Pan bar for the MVH500A and MVH500AH fluid video heads.
Length 34cm (13.4in).
502HLV PAN BAR
509HLV PAN BAR
Pan bar for the MVH502A and MVH502AH fluid video heads.
Length 35,5cm (14in).
Pan bar for the 504HD and 509HD fluid video heads.
Max lenght 60,5cm (23.8in) - Min lenght 37,5cm (14.7in) - Extension 23cm (9in).
57
TRIPOD ACCESSORIES: in order to customize your tripod for every different environment, the Manfrotto tripod
accessories range includes a complete set of different dollies, spreaders and reversible spiked feet.
114 VIDEO DOLLY
Heavy duty, super sturdy, designed for use with large video tripods; individually braked wheels with cable guards. Folds for transporting. Includes 3/8” attachment which
allows you to attach a head for low angle shooting.
60kg
13.3lb
8kg
17.6lb
112cm
44.1in
114MV PORTABLE DOLLY
Same as 114 dolly with ability to accept spiked tip tripods. Includes 3/8” attachment which allows you to attach a head for low angle shooting.
60kg
13.3lb
58
6,2kg
13.7lb
112cm
44.1in
181B FOLDING AUTODOLLY
Single lever braking system controls all three 80mm wheels. It folds legs for transporting and storage. Includes 3/8” attachment which allows you to attach a head for low
angle shooting.
25kg
55.1lb
4,5kg
9.9lb
127cm
50in
127 VIDEO DOLLY
Designed for light and medium weight tripods. The 76mm wheels have a sure-lock feature that raises the wheels free off the ground so that the dolly then rests on
extended feet. Includes 3/8” attachment which allows you to attach a head for low angle shooting.
10kg
22lb
2,4kg
5.3lb
110cm
43.3in
127VS BASIC DOLLY
Everything that the 127 has with the ability for a variable spread for the legs. Suitable for standard and spiked feet. Includes 3/8” attachment which allows you to attach a
head for low angle shooting.
10kg
22lb
3,4kg
7.5lb
78-114cm
30.7-44.9in
59
537SPRB MID LEVEL SPREADER
204SPK3 REVERSIBLE SPIKED FEET
The new telescopic mid-level spreader allows you to set the proper leg angle
and resulting tripod footprint.
Reversible rubber/metal spiked feet (set of 3) supplied with a dedicated fixing
tool. The spike is made of a special hard anodized aluminum alloy extremely
resistant to corrosion. See chart below for tripod compatibilty.
165 TRIPOD SPREADER
204SCK3 SUCTION CUP/RETRACTABLE SPIKED FEET
Universal tripod spreader with variable diameter width controls from 80 to 130cm
(31.5 to 51.2in).
A rubber suction cup feet (set of 3) with retractable stainless steel spike.
The suction cup increases the footprint of the foot by almost 20 times, giving
much greater stability when needed. See chart below for tripod compatibilty.
0.6kg
1.4lb
80-130cm
31.5-51.2in
165MV TRIPOD SPREADER FOR SPIKED FEET
565 SPIKED FOOT SHOES
Universal tripod spreader with variable diameter width controls from 80mm to
130mm (31.5 to 51.2in). It accepts spiked tip tripod.
Set of 3. See chart below for tripod compatibilty.
0.6kg
1.4lb
80-130cm
31.5-51.2in
DOLLY
TRIPOD MODELS
114
114MV
181B
545B
X
X
545GB
X
X
546B
X
X
546GB
X
X
MID SPREADER
127V
127VS
537SPRB
SPREADER
165
REVERSIBLE FEET
165MV
204SPK3
SUCTION CUP FEET
204SCK3
X
X
X
X
X
X
MVT502AM
535
X
X
X
536
X
X
X
755CX3
X
X
755XB
X
X
528XB
X
X
X
X
117B
X
X
X
X
PLEASE NOTE: this chart only shows technical compatibility. When assembling the products always consider the maximum load of the component with the lowest loading capacity.
60
565
492LCD LCD MINI BALL HEAD
The 492LCD mini ball head is a swivel mounting accessory than can be attached to the bottom of LCD or TFT monitors so you can mount the monitor to the top of the
camera by using the “hot shoe” located on the top of most camcorders.
2kg
4.4lb
6,4cm
2.5in
0,15kg
0.3lb
529B HI-HAT
529B Hi-Hat enables you to get shots from the dog’s perspective. The 529B has a 100mm half-bowl, adjustable leg angles to mount the camera in the tightest or lowest
of locations and thanks to the built-in spreader you can simply use the 529B on any even surface. The feet are rubber-padded to protect delicate surfaces and have a hole
so that the 529B can be screwed to a ladder, apple-box or a sheet of wood.
Recommended heads:
- 526
- 509HD
- 504HD (with 319 adapter)
- MVH502A (with 319 adapter), MVH502AH (with 500BALLSH half ball)
20kg
44.1lb
14,5cm
5.7in
19,5cm
7.7in
20,5cm
8.1in
2,7kg
6lb
61
BAGS and straps
Not only bags!! But I would leave it off and start with Manfrotto video product range is completed with a range
of soft goods that allows an easy transportation and storage. A complete family of padded bags developed with
multihandles and internal pockets, six different dimensions from the smallest MB MBAG70N up to the largest
MB MBAG120PN. Different typologies of straps are available, presenting different design and materials for
alternative carrying solutions.
Easy access even with the bigger video
tripods.
62
Rebated zippers.
Thermoformed padding with the new
Manfrotto logo.
Attention to details: small injected
Manfrotto logo on the handles.
Comfortable carrying handle.
Rubberized Manfrotto loop, helps when
using the zips. This feature is used on
all the new Manfrotto bags, functional
and iconic.
Inner pocket for tripod accessory storage.
MB MBAG120PN
MB MBAG100PN
MB MBAG90PN
MB MBAG80PN
MB MBAG80N
MB MBAG70N
MB MBAG120PN 120CM PADDED TRIPOD BAG
The largest bag in the range, the MB MBAG120PN is padded to protect your equipment and has the following features:
• Asymmetric tapered shape allows you to store the tripod with the head attached.
Tripod legs fit comfortably in the narrower end and extra space is allowed for the larger volume of the head at the wider end. Diameter 23cm (9.1in).
• Zipper extends down the length of the bag, but also fully opens the top end of the bag.
• Thermoform padding holds the tripod in place in the bag and protects it, especially the head, during transport.
• Inner pocket holds accessories (such as video head pan bars).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.
• Can be hand-carried horizontally by the side handle, vertically by the end handle (also useful for storage), or shoulder-carried using the included strap.
MB MBAG100PN 100CM PADDED TRIPOD BAG
Same design of MB MBAG120PN 20cm smaller and without the double positioning carrying handle.
Diameter 23cm (9.1in).
MB MBAG90PN 90CM PADDED TRIPOD BAG
Same design of MB MBAG120PN 30cm smaller and without the double positioning carrying handle.
Diameter 23cm (9.1in).
MB MBAG80PN 80CM PADDED TRIPOD BAG
Same design of MB MBAG120PN 40mm smaller and without the side handle or inner accessory pocket. The MB MBAG80PN is also narrower than the other padded bags.
The narrow end measures 13cm (5.1in) diameter, the wide end measures 15cm (5.9in).
MB MBAG80N 80CM UNPADDED TRIPOD BAG
The MB MBAG80N is an unpadded tripod bag.
• Slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all levers to be removed.
• Zipper extends down the length of the bag, but also fully opens the top end of the bag.
• Logo end cap is padded to offer protection to the tripod head, the rest of the bag is unpadded.
• Shoulder strap included (the MB MBAG80N doesn’t have either end or side handle).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality. Diameter 13cm (5.1in).
MB MBAG70N 70CM UNPADDED TRIPOD BAG
Same design of MB MBAG80N 10cm smaller.
63
401N QUICK ACTION STRAP
A quick and easy accessory for carrying your tripod when walking, hiking, cycling or just getting from shoot to shoot. Use the shorter straps to fasten the padded 401N
to one of the legs of your tripod, bind the remaining legs together using the longer adjustable quick release straps, sliding the tripod over your shoulder and you’re
ready to go, with your hands free to grab those vital last minute items. The padding helps hold the tripod in place and protects your back from bruises and chaffing.
The 401N even stays attached to your tripod when shooting (all you need to do is release the longer quick release straps so you can maneuver and position all three legs), so
you’re always ready to capture the images you want, but also always ready to move off again to the next location.
64
Straps can be removed and custom-positioned to better match
the size of your tripod.
The strap stays attached to your tripod when
shooting.
MSTRAP-1 TRIPOD SHOULDER STRAP
MSTRAP-2 TRIPOD HANDLE STRAP
The MSTRAP-1 allows you to carry the tripod when attached to the ring
positioned right under the tripod collar.
The Mstrap-2 is a convenient and smart way to carry a video tripod plus a
head. The ergonomics of this strap allows to carry easily the products. Safe grip
thanks to the rubber coated adjustable velcro. Easy to mount, safely hooked to
the upper casting of the tripod. Well balanced, also with heavy duty video heads,
thanks to the ergonomics of the handle.
102 LONG STRAP
402 SHORT STRAP
The 102 strap is a basic but convenient way to carry your system. It has a spring
clip that fastens quickly to the steel ring at the shoulder of the tripod, and a closed
loop that goes around the feet of the tripod and tightens to grip them securely.
Features an adapter for compatibility with all Manfrotto tripods and rubberized
fabric for comfort and to avoid the tripod slipping on your shoulder.
The 402 is a simple loop strap, with a single spring clip that attaches quickly to
the steel ring at the shoulder of your tripod. Features an adapter for compatibility
with all Manfrotto tripods. Strap is in grey rubberized fabric for comfort and to
avoid the tripod slipping on your shoulder.
Key to symbols
Closed length
Tripod symbols
Scala 1:1 da catalogo.
Minimum height
Twin leg
Scala 1:1 da catalogo.
FLAT
FLAT
FLAT
Maximum height
Scala 1:1 da catalogo.
Single leg
Scala 1:1 da catalogo.
FLAT
Flat base
60/75
60mm + 75mm bowl
Maximum height with
extended center column
Monopod minimum height
Monopod maximum height
75mm + 100mm bowl
Footprint diameter
75mm bowl
100mm bowl
60mm bowl + half ball included
Counterbalanced weight
Suggested maximum weight that the product can properly balance.
It indicates the working (dynamic) payload, without the help of tilt brake
Safety payload
Maximum weight that the product can carry/support in static condition.
Ability of the head to support, move and lock (with pan&tilt brakes) a certain weight
Weight
75mm bowl + half ball included
Head height
100mm bowl + half ball included
Flat base with 3/8” screw
+ extendible (geared) center column
Leveling flat base with 3/8” screw
+ extendible center column
Plate supplied with the head
Head symbols
55
55
C.O.G.
C.O.G.
Aluminum
Carbon Fiber
C.O.G.: Center Of Gravity is the weighted average location of all the mass in a body. Depending on the dimensions of the camera,
the distance from the plate to the C.O.G. will be longer or shorter. Lightweight/compact cameras and HDSLRs will have a shorter
distance from the plate to the C.O.G and bigger cameras will have a longer distance from plate to C.O.G. Video head performance is measured with different distances of COG according to the load capacity of the head.
We use two standard C.O.G. measurements:
- @ 55mm for Ø60-75mm half bowl heads 701HDV, MVH500A(H), 501HDV, MVH502A(H), 504HD
- @ 125mm for Ø100mm half bowl heads (509HD, 526)
1 stage
2 stages
CBS is our Counterbalance System; a fundamental part of what makes our video heads such useful video tools. The principal
function of CBS is to cancel out the slow falling effect seen in video footage when the videocamera’s own weight causes it to
tilt forward or backward on an unbalanced video head. CBS ensures that the cameraman need only apply minimal effort to the
head’s pan bar to move the camera precisely and smoothly.
3 stages
FDS is a friction system used across the Manfrotto video head and monopod ranges, based on specially developed cartridges that
make movements fluid and help stop unwanted vibrations (such as those from the video operator’s own hand) being transmitted. Our
range uses two types of FDS: fixed and variable. Variable FDS allows you to regulate and control the level of friction applied based
on the type and style of video you’re shooting, on the weight of your camera equipment and on climatic conditions and temperature.
Our patented electronic system allows you to record the position at which a particular equipment set-up is perfectly balanced, and
then recall that position easily any time you need to use the same equipment again.
65
INDEX
66
Art. N°
Description
035C
037
102
114
114MV
117B
127
127VS
143RC
165
165MV
181B
200PL-14
204SCK3
204SPK3
234RC
241
241FB
244RC
319
323
325N
357
357PLONG
357PLV
386BC
401N
402
492LCD
500BALL
500BALLSH
500HLV
500PLONG
501PL
501PLONG
502HLV
504PLONG
504HD
504HD, 535K
504HD, 536K
504HD, 546BK
504HD, 546GBK
509HD
509HD, 536K
509HD, 545BK
509HD, 545GBK
509HLV
509PLONG
520BALL
520BALLSH
521CFi
521PFi
522AV
522P
522SCA
523RC
524ADAPT
524CFi
526
526, 528XBK
526, 536K
526, 545BK
526, 545GBK
528XB
529B
537SPRB
535
536
545B
545GB
546B
546GB
SUPER CLAMP
CAMCORDER MOUNTING STUD
LONG STRAP
VIDEO DOLLY
PORTABLE DOLLY
PRO VIDEO TRIPOD
VIDEO DOLLY
BASIC DOLLY
MAGIC ARM WITH QUICK RELEASE PLATE
TRIPOD SPREADER
TRIPOD SPREADER FOR SPIKED FEET
FOLDING AUTODOLLY
VIDEO CAMERA PLATE
SUCTION CUP/RETRACTABLE SPIKED FEET
REVERSIBLE SPIKED FEET
MONOPOD QUICK RELEASE TILT TOP
PUMP CUP
PUMP CUP WITH FLAT BASE
VARIABLE FRICTION ARM WITH QUICK RELEASE PLATE
100MM TO 75MM ADAPTER
RECTANGULAR VIDEO QUICK RELEASE ADAPTER
VIDEO HEAD BOWL ADAPTER
ADAPTER
VIDEO CAMERA PLATE
VIDEO CAMERA PLATE
NANO CLAMP
QUICK ACTION STRAP
SHORT STRAP
LCD MINI BALL HEAD
100MM HALF BALL
100MM SHORT HALF BALL PAN BAR
VIDEO CAMERA PLATE
VIDEO CAMERA PLATE
VIDEO CAMERA PLATE
PAN BAR
VIDEO CAMERA PLATE
FLUID VIDEO HEAD - 75mm half ball
VIDEO SYSTEM
VIDEO SYSTEM
VIDEO SYSTEM
VIDEO SYSTEM
Pro Fluid Video Head - 100mm half ball
VIDEO SYSTEM
VIDEO SYSTEM
VIDEO SYSTEM
PAN BAR
VIDEO CAMERA PLATE
75MM HALF BALL
75MM SHORT HALF BALL ZOOM REMOTE CONTROL FOR ENG LENSES
FOCUS/IRIS REMOTE CONTROL FOR PANASONIC
ADAPTOR CABLE FOR AV-R SONY CONNECTOR
FOCUS/IRIS REMOTE CONTROL FOR PANASONIC
REMOTE CONTROL CABLE STANDARD
RAIN COVER FOR REMOTE CONTROL
ENG LENS ADAPTER CABLE
REMOTE CONTROL FOR ENG LENSES
PRO FLUID VIDEO HEAD - 100mm half ball
VIDEO SYSTEM
VIDEO SYSTEM
VIDEO SYSTEM
VIDEO SYSTEM
PRO HEAVY VIDEO TRIPOD
HI-HAT
MID LEVEL SPREADER
MPRO CARBON FIBER 2-STAGE VIDEO TRIPOD
MPRO CARBON FIBER 3-STAGE VIDEO TRIPOD
PRO HEAVY-DUTY VIDEO TRIPOD
PRO HEAVY-DUTY VIDEO TRIPOD
PRO VIDEO TRIPOD
PRO VIDEO TRIPOD
Page
55
55
64
58
58
27
59
59
54
60
60
59
56
60
60
55
55
55
54
57
56
57
56
56
56
55
64
64
61
57
57
57
56
56
56
56
56
12
13
13
13
13
14
15
15
15
57
56
57
57
51
51
53
53
53
53
53
53
16
17
17
17
17
27
61
60
21
21
25
25
26
26
Art. N°
Description
Page
560B-1
FLUID VIDEO MONOPOD
29
562B-1
FLUID VIDEO MONOPOD
29
565
SPIKED FOOT SHOES
60
577
VIDEO QUICK RELEASE ADAPTER
56
595B
FIG RIG
45
595CLA
FIG RIG CLAMP 45
755CX3
MDEVE MAGFIBER VIDEO TRIPOD
19
755XB
MDEVE Aluminum VIDEO TRIPOD
19
814-1
MINI HYDROSTATIC ARM
54
819-1
SMALL HYDROSTATIC ARM
54
823
MEDIUM HYDROSTATIC ARM
54
MB MBAG100PN
100CM PADDED TRIPOD BAG
63
MB MBAG120PN
120CM PADDED TRIPOD BAG
63
MB MBAG70N
70CM UNPADDED TRIPOD BAG
63
MB MBAG80N
80CM UNPADDED TRIPOD BAG
63
MB MBAG80PN
80CM PADDED TRIPOD BAG
63
MB MBAG90PN
90CM PADDED TRIPOD BAG
63
MICC1
MICROPHONE CLIP
45
MICC2
MICROPHONE SPRING CLIP
45
MICC4
UNIVERSAL SHOCK MOUNT MICROPHONE HOLDER
45
MSTRAP-1
TRIPOD SHOULDER STRAP
64
MSTRAP-2
TRIPOD HANDLE STRAP
64
MVA060T
75MM TO 60MM ADAPTER
57
MVA500
Easy link connectors
42-55
MVH500A
Fluid Video Head - 60mm half ball
8
MVH500AH
Fluid Video Head - flat base
8
MVA511W-1
PADDED SHOULDER MOUNT
39
MVA511WK-1
Shoulder Mounted Rig
33
MVA511P
PADDING FOR SHOULDER MOUNT
43
MVA512W
Flexible Mattebox 38
MVA512WK-1
FLEXIBLE MATTEBOX SYSTEM
34
MVA513WK-1
Long lens support system
35
MVA513W
Fixed Plate
36
MVA514W
LENS SUPPORT
41
MVA515W
Variable Plate
36
MVA516W
BODY SUPPORT
41
MVA517WUniversal Mount
41
MVA518EXT
Extensions for handles
43
MVA518W
ADJUSTABLE HANDLES
37
MVA519W
160mm H-OFFSET
39
MVA519S
80mm H-OFFSET
39
MVA520
CONNECTORS FOR RODS
42
MVA520W-1
Rods - 300mm
37
MVA521extension tubes for counterweight
42
MVA521W
Counterweight
39
MVA521L
LIGHT COUNTERWEIGHT
39
MVA522
FIG RIG - SYMPLA ADAPTOR
40-45
MVA522W
Fig Rig - Sympla Version
40
MVA523W-1
Rods - 150mm
37
MVA524W
V-OFFSET
39
MVA525W
RC2 MOUNT
36
MVA525WK
Lightweight Shoulder Mounted Rig
32
MVH500AH, 755CX3K
VIDEO SYSTEM
9
MVH500AH, 755XBK
VIDEO SYSTEM
9
MVH502A
Fluid Video Head - 75mm half ball
10
MVH502A, 546BK-1
VIDEO SYSTEM
11
MVH502A, 546GB-1
VIDEO SYSTEM
11
MVH502AH
Fluid Video Head - flat base
10
MVK500AM
VIDEO SYSTEM
9
MVK502AM-1
VIDEO SYSTEM
11
MVK502C-1
VIDEO SYSTEM
11
MVK500C
VIDEO SYSTEM
9
MVM500A
FLUID MONOPOD WITH 500 HEAD
9-28
MVR901APCL
PAN BAR CLAMP ADAPTOR
53
MVR901ECEX
CLAMP-ON REMOTE CONTROL
51
MVR901ECLA
LANC REMOTE CONTROL
51
MVR901ECPL
CLAMP-ON REMOTE CONTROL
51
MVR901EPEX
PAN BAR REMOTE CONTROL
53
MVR901EPLA
PAN BAR REMOTE CONTROL
53
MVR911ECCN
CLAMP-ON HDSLR REMOTE CONTROL FOR CANON
46
MVR911EJCN
JOYSTICK HDSLR DELUXE REMOTE CONTROL FOR CANON48
MVT502AM
TELESCOPIC-TWIN LEG TRIPOD
23
Manfrotto Video Supports
The skills of the world’s best photographers and video
operators are brought together by Manfrotto in an
innovative on-line platform.
Featuring:
Harry De Zitter,
Bill Frakes,
Joe McNally,
Drew Gardner,
Roberto Bigano,
Ami Elsius,
Marc de Tollenaere,
Kristoff Ramon,
David Duchemin,
Milko Marchetti,
Uri Golman,
Adam Barker,
Sébastien Devaud,
Kazuyuki Okajima and many others.
manfrottoschoolofxcellence.com
manfrotto.com
LNORDV13,G _ N 2 09/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising