Mini Max LED

ORDERCODE 40364

Congratulations!

You have bought a great, innovative product from Showtec.

The Showtec Mini Max LED White brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.

We design and manufacture professional light equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information : [email protected]

You can get some of the best quality, best priced products on the market from Showtec.

So next time, turn to Showtec for more great lighting equipment.

Always get the best -- with Showtec !

Thank you!

Showtec

Showtec Mini Max LED White

™

Product Guide

Warning.................................................................................…...……………..…………………………….………..….. 2

Safety-instructions…………………………………………………………………………………………………………

Operating Determinations .……………………………………………………………………………………………..

Rigging .……………………………………………………………………………………………………………………..

2

3

3

Description...............................................................................…...………………………………………….………..…. 5

Features and Overview ………………………………...….……………….………….……….……….………………

Backside…………………………………………………...…...….……………….…………………...….………………

Installation...............................................................................…...…………………………………….…………………

5

6

6

Set Up and Operation.....................................................................……..………………………………………………

Fixture Linking..............................................................……..………………………………………..………………..

Data Cabling..............................................................……..……………………………………………..…………..

6

7

8

One Mini Max LED White.................................................................………………………………………………….

Multiple Mini Maxs LED White..............................................................………………………………………………

8

8

Menu Overview..............................................................................…………………………………………….……

DMX 512 Address .....................................................................…………………………………………..……..

Mode menu .....................................................................……………………………………………………..…

9

10

10

Built-in Programs .....................................................................……………………………………………..……

Auto Speed .....................................................................……………………………………………..…………

10

10

Pan menu

Tilt menu

.....................................................................……………………………………………….…………

.....................................................................………………………………………………….…………

Pan/Tilt Channel Flop menu ........................….……………………………..…………………………..………

11

11

11

Test menu .....................................................................………………………………………………..…………

Display menu .....................................................................………………………………………………………

11

11

Reset menu

16-bit menu

.....................................................................………………………………………………………..

.....................................................................………………………………………………………..

Time menu .....................................................................……………………………………….…………………

11

11

11

DMX Protocol………...................................................…………………………………………………………………

Control Panel….............……....................................…………………………………………………………………..

Control Mode ........................................…………………………………………………………………………………

DMX addressing ...................................………………………………………………….…………………………..….

DMX 512 Channel settings for Mini Max LED White ……..………………………………………………………….

12

13

13

13

14

Channel Settings...........................................................................………..………….…….…………………………… 15

Maintenance...................................................................................………..………….…….………………………….. 15

Troubleshooting............................................................................………………….………………….………………...

No Light, No Movement - All Products............................................………………….…………………………....

16

16

No Response to DMX………….......................................................………………….……………………………… 16

Product Specifications.................................................................……………….…….………………………………... 17

1

WARNING

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device have to:

- be qualified

- follow the instructions of this manual

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Before your initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Never use anything to cover the ground contact.

Never leave any cables lying around.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.

Always hold the fixture at the transport handles.

Never look directly into the light source.

Do not switch the device on and off in short intervals, as this would reduce the system’s life.

Do not shake the device. Avoid brute force when installing or operating the device.

Only use device indoor, avoid contact with water or other liquids.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

Avoid flames and do not put close to flammable liquids or gases.

Always keep case closed while operating.

Always allow free air space of at least 50 cm around the unit for ventilation.

Always disconnect power from the mains, when device is not used or before cleaning! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the powercord from time to time.

2

If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due to cracks or deep scratches.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. Movinghead must be installed out of the reach of children. Never leave the unit running unattended.

For replacement use fuses of same type and rating only.

This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.

During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

CAUTION ! EYEDAMAGES !.

Avoid looking directly into the light source.

(meant especially for epileptics) !

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.

If this device is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.

You endanger your own safety and the safety of others!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure:

If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.

Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.

The projector must never be fixed swinging freely in the room.

The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety-cable.

When rigging, derigging or servicing the projector, always make sure, that the area below the installation place is blocked and staying in the area is forbidden.

The Mini Max LED White can be placed on a flat stage floor or mounted to any kind of truss by a clamp.

3

Mounting a clamp to the underside of the MiniMax moving head

1. Bolt a clamp to the included bracket with a grade 8.8 (minimum) M12 bolt and locknut, or as

recommended by the clamp manufacturer, through the 13 mm hole in the bracket.

2. Align the bracket with the keyholes in the base. Insert both locking pins into the holes and turn both

Levers a full 1/4 turn clockwise to lock. The fasteners are locked only when turned fully clockwise.

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

L

N

EU Cable

BROWN

BLUE

UK Cable

RED

BLACK

US Cable

YELLOW/COPPER

SILVER

YELLOW/GREEN GREEN

Make sure that the device is always connected properly to the earth!

GREEN

4

Pin

FASE

NUL

EARTH

Description of the device

Features

The Showtec Mini Max LED White is a LED moving-head with high output and great effects.

• 36x 1W LEDs (30x White, 6x Amber)

• DMX-control via standard DMX-controller

• 10 DMX-control channels required

• Strobe-effect with adjustable speed (1 - 10 flashes/sec.)

• Beam Angle 9º

• 16-bit resolution

• Amber/White color mixing

• Dimmer 0-100%

• Music-controlled

• Master/Slave function

• Stand alone function

• Pan 0º -- 540º

• Tilt 0º -- 230º

NOTE: Knowledge of DMX is required to fully utilize this unit.

DMX Channel Summary

DMX Mode Channel Description

5

6

7

1

2

3

4

8

9

10

Pan

Tilt

Pan/Tilt Speed

White

Amber

White/Amber Control Mode

Dimmer

Strobe / Auto Speed

Pan Fine

Tilt Fine

Overview

1) Lens

2) LCD Display + Menu Buttons

1

5

Fig. 1

2

Backside

3 4 5 6

Fig. 2

3) DMX signal connector (IN)

4) Powercable

5) ON/OFF

6) DMX signal connector (OUT)

Installation

Remove all packing materials from the Mini Max LED White. Check that all foam and plastic padding is removed. Always disconnect from electric mains power supply before cleaning or servicing. Damages

caused by non-observance are not subject to warranty.

6

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.

The Mini Max LED White uses 10 channels.

Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the

EIA-485 standard no more than 32 devices should be connected on one data link.

Connecting more than 32 fixtures on one serial data link without the use of a DMX optically isolated splitter may result in deterioration of the digital DMX signal.

Maximum recommended serial data link distance: 500 meters

Maximum recommended number of Mini Maxs on a serial data link: 32 fixtures

7

Data Cabling

To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.

DAP Audio Certified DMX Data Cables

• DAP Audio Basic microphone cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.

Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).

• DAP Audio cable f or the demanding user with exceptional audio-qualities and connector made by

Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

One Mini Max LED White

1. Fasten the moving head onto firm trussing (Use a proper clamp fastened onto the Mini Max LED White).

Leave at least 1 meter on all sides for air circulation.

2. Plug one end of the electric mains power cord into the IEC socket on the unit .

Then plug the other end of the cord into a proper electric power supply socket.

3. To set the program to be played, see page 9 for the menu settings

Multiple Mini Maxs LED White

1. Fasten the effect light onto firm trussing (Use a proper clamp fastened onto the Mini Max LED White).

Leave at least 1 meter on all sides for air circulation.

2. Use a 3-p XLR cable to connect the Mini Max LED White and other devices.

3. Link the units as shown in (figure 3), Connect a DMX signal cable from the first unit's DMX "out" socket to

the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.

4. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the other

end of the mains power cord into proper electric power supply sockets, starting with the first unit.

Do not supply power before the whole system is set up and connected properly.

Multiple Mini Max LED White Set Up

Fig. 3

Note : Link all cables before connecting electric power

8

MENU OVERVIEW

9

Press the UP/DOWN buttons to scroll through the 12 main menus:

DMX 512 Address

Mode menu

Built-in Programs

Auto Speed

Pan menu

Tilt menu

Pan/Tilt Channel Flop menu

Test menu

Display menu

Reset menu .

16-bit menu

Time menu

DMX 512 Address

When you press SET in menu DMX 512 address to set the DMX address.

You can choose your DMX address between 001-502.

Mode menu

DMX Mode

Auto Mode

Sound-active Mode

When you press ENTER in Mode menu, you can choose 3 main modes

Built-in Programs

When you press ENTER in this menu, you can choose 8 built-in programs.

Pr-1 to Pr-4 are Switch programs.

Pr-5 to Pr-8 are Fade programs.

Auto Speed

When you press ENTER in this menu, you can choose the Auto Speed from 0,1 – 10 seconds.

10

Pan menu

Tilt menu

Test menu

Pan/Tilt Channel Flop menu

Display menu

Reset menu

16-bit menu

Time menu

Pan

Pan reverse

Tilt

Tilt reverse

Standard

Reverse

Check all channels

Check Pan

Check Tilt

Check White

Check Amber

Display normal

Display reverse

Reset device

16-bit On

16-bit Off

Shows the operation time

Operation time exceeds 9999 hours

11

DMX Protocol

Channel 1 - Horizontal movement (Pan)

Push the slider up, in order to move head horizontally (PAN).

Gradual head adjustment from one end of the slider to the other (0-255, 128-center).

The head can be turned by 540° and stopped at any position you wish.

Channel 2 - Vertical movement (Tilt)

Push the slider, up in order to move head vertically (TILT).

Gradual head adjustment from one end of the slider to the other (0-255, 128-center).

The head can be turned by 230° and stopped at any position you wish.

Channel 3 – Pan/Tilt Speed

0-255 From Max Speed (0) to Min. Speed (255) in vector mode

Channel 4 – White

0-255

Channel 5 – Amber

0-255

Gradual adjustment White from 0 – 100%

Gradual adjustment Amber from 0 – 100%

Channel 6 – White/Amber, Auto Mode, Sound-active

0-24

24-49

50-74

White/Amber

Built-in Auto Program 1

Built-in Auto Program 2

75-99

100-124

124-149

150-174

175-199

200-224

Built-in Auto Program 3

Built-in Auto Program 4

Built-in Auto Program 5 (No Pan & Tilt)

Built-in Auto Program 6 (No Pan & Tilt)

Built-in Auto Program 7 (No Pan & Tilt)

Built-in Auto Program 8 (No Pan & Tilt)

225-250

When CH6 is 0-24:

When CH6 is 25-224:

Sound-active Program

CH4 White, CH5 Amber, CH7 Master Dimmer, CH8 Strobe.

CH8 Auto Speed.

When CH6 is 225-255: CH1, CH2, CH3, CH4, CH5, CH6, CH7 and CH8 are invalid.

Channel 7 – Master Dimmer (When CH6 = 0 - 24)

0-255 From black to brightest

Channel 8 – Strobe (When CH6 = 0 - 24)

0-7

8-255

Full On

Strobe effect, from slow to fast (0-10 flashes/sec.)

Channel 8 – Auto Speed (When CH6 = 25 - 224)

0-255 Auto Speed from fast to slow

Channel 9 – Pan fine 16 bit (2,4°)

Channel 10 – Tilt fine 16 bit (2,4°)

NOTE: CH4, CH5 and CH7 are dimmer channels.

When CH4, CH5 or CH7 = 0 there is no output

12

The MiniMax can be operated with a controller in DMX, Sound Active or without the controller in Stand- alone Mode.

Control Panel

When the indicator light is on, means the MiniMax is working.

A. LED

B. Display

D. Down Button

E. Up Button

Fig. 5

C. [FUN] Button F. [ENTER] Button

Control Mode

The fixtures are individually addressed on a data-link and connected to the controller.

The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the controller will display the saved DMX address the next time.)

DMX Addressing

The control panel on the front side of the base allows you to assign the DMX fixture address, which is the first channel from which the MiniMax will respond to the controller.

Please note when you use the controller, the unit has 10 channels.

When using multiple MiniMax’s, make sure you set the DMX addresses right.

Therefore, the DMX address of the first MiniMax should be 1(A001); the DMX address of the second

MiniMax should be 1+10=11 (A011); the DMX address of the third MiniMax should be 11+10=21(A021), etc.

Please, be sure that you don’t have any overlapping channels in order to control each MiniMax correctly.

If two or more MiniMax’s are addressed similarly, they will work similarly.

For address settings, please refer to the instructions under ”Addressing’

Controlling:

After having addressed all MiniMax fixtures, you may now start operating these via your lighting controller.

Note: After switching on, the MiniMax will automatically detect whether DMX 512 data is received or not.

If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.

The problem may be:

- The XLR cable from the controller is not connected with the input of the MiniMax.

- The controller is switched off or defective, the cable or connector is detective, or the signal wires are

swapped in the input connector.

Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure proper transmission on the DMX data link.

13

A161

A171

A181

A191

A201

A211

A221

A231

A241

A251

A261

A271

A281

A291

A021

A031

A041

A051

A061

A071

A081

A091

A101

A111

A121

A131

A141

A151

A301

A311

A321

A331

A341

A351

A361

A371

A381

A391

DMX 512 Channel settings for Mini Max LED White

Light No.

1

2

Start Channels

A001

A011

Light No.

41

42

27

28

29

30

23

24

25

26

17

18

19

20

21

22

10

11

12

13

14

15

16

7

8

9

3

4

5

6

31

32

33

34

35

36

37

38

39

40

67

68

69

70

63

64

65

66

57

58

59

60

61

62

50

51

52

53

54

55

56

43

44

45

46

47

48

49

71

72

73

74

75

76

77

78

79

80

14

Start Channels

A401

A411

A421

A431

A441

A451

A461

A471

A481

A491

A501

A511

A521

A531

A541

A551

A561

A571

A581

A591

A601

A611

A621

A631

A641

A651

A661

A671

A681

A691

A701

A711

A721

A731

A741

A751

A761

A771

A781

A791

Channel Settings

Maintenance

The Showtec Mini Max LED White requires almost no maintenance. However, you should keep the unit clean.

Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.

The lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light-output very quickly.

Please clean internal components once a year with a light brush and vacuum cleaner.

Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.

Make sure connections are thoroughly dry before linking equipment or supplying electric power.

The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year.

The following points have to be considered during the inspection:

1. All screws used for installing the device or parts of the device have to be tightly connected and must

not be corroded.

2. There may not be any deformations on housings, fixations and installation spots.

3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.

4. The electric power supply cables must not show any damages or material fatigue.

15

Troubleshooting

No Light, No Movement - All Products

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps.

If the light effect does not operate properly, refer servicing to a technician.

Response: Suspect two potential problem areas: the power supply, the LEDS.

1. Power supply. Check that the unit is plugged into an appropriate power supply.

2. The LEDs. Return the Mini Max LED White to your Showtec dealer.

No Response to DMX

Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction.

1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power.

Try your DMX control again.

2. Determine whether the controller or light effect is at fault. Does the controller operate properly with

other DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light

effect to a qualified technician.

16

Product Specification

Model: Showtec Mini Max LED White

Voltage: 230V-50Hz (CE)

Power: 160W

Dimensions (incl. handles): 260x220x350mm (LxWxH)

Weight: 5,68 kg

Operation and Programming

Signal pin OUT : pin 1 earth, pin 2 (-), pin 3 (+)

Set Up and Addressing : LED control panel

DMX Channels: 10

Signal input 3-pin XLR male

Signal output 3-pin XLR female

Control: Automatic and DMX

Electro-mechanical effects

Beam Angle: 9º

Dimmer : 0 – 100% linear dimmer

Strobe-effect with variable speed (1 flash -- 10 flashes/sec.)

DMX-control via standard DMX-controller

Pan 0º -- 540º

Tilt 0º -- 230º

Cooling: Fan cooled

Design and product specifications are subject to change without prior notice.

Website: www.Showtec.info

Email: [email protected]

17