Pro-face GP577R-TC11 Specifications

Pro-face GP577R-TC11 Specifications
Programmable Operator Interfaces
IBM Compatible Industrial Panel Computers
Panel displays that can replace your CRT, keyboard
and mouse, and save valuable space
PL-X900 Series
PL-6700 Series
FP-570T
PL-5700 Series
VGA Display
PL-3700S
FP-770T/FP-775S
XGY Display
PL-B900 Series
Programmable Operator Interface for Industrial Controllers
Programmable Operator Interface with I/O
control features
GP77R Series
100MHz RISC CPU
and 2-way Networking
GLC300T
GP70 Series
32bit RISC CPU
GP-PRO/PB
for Windows
Screen Editor
Pro-Control Editor
GLC100 Series
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
For printing purposes, the colors in this catalog may differ from those of the actual unit.
Actual user screens may differ from the screens shown here.
LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are brighter
than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects.
Microsoft Windows 95,98 WindowsNT are registered trademarks of the Microsoft Corporation.
All product names used in this catalog are the registered trademarks of their respective companies.
All information contained in this catalog is subject to change without notice.
c Copyright 2000 Digital Electronics Corporation All Rights Reserved.
Global Head Office
European Head Office
Digital Electronics Corporation
8-2-52 Nanko-higashi Suminoe-ku, Osaka 559-0031 JAPAN
Tel: +81-(0)6-6613-3116 Fax: +81-(0)6-6613-5888
http://www.pro-face.com/ [email protected]
Pro-face HMI B.V.
Amsteldijk 166, 1079 LH Amsterdam THE NETHERLANDS
Tel: +31-(0)20-6464-134 Fax: +31-(0)20-6464-358
http://www.proface.com/ [email protected]
South Korea
France
Pro-face Korea Co., Ltd.
Room #701, Jaeyoung Building 678-10, Deungchon-dong,
Kandseo-ku, Seoul
157-030 KOREA
Tel: +82-(0)2-658-6835 Fax: +82-(0)2-3664-6839
http://www.proface.co.kr/ [email protected]
Taiwan
Pro-face France
Le Vinci 1, rue Henri Becquerel, 77290 Mithry-Mory FRANCE
Tel: +33-(0)1-60-21-22-91 Fax: +33-(0)1-60-21-22-92
Italy
Pro-face HMI B.V. Italy
Via Carcano 44, 20033 Desio (MI) ITALY
Tel: +39-0362-33-71-63 Fax: +39-0362-30-77-25
Pro-face Taiwan Co., Ltd.
3F-1, No. 315, Sec. 5 Nan King East Road, Taipei 105
TAIWAN R.O.C.
Tel: +886-(0)2-2760-0237 Fax: +886-(0)2-2760-0257
http://www.proface.com.tw/ [email protected]
Germany
North/South America
Scandinavia
Pro-face America, Inc.
2190-E Gladstone Court, Glendale Heights IL 60139 U.S.A.
Tel: +1-630-351-1101 Fax: +1-630-351-1102
http://www.profaceamerica.com/
[email protected]
Pro-face HMI B.V. Scandinavia
Danmarksvej 30 L1, 8660 Skanderborg DENMARK
Tel: +45-70-22-0122 Fax: +45-70-22-0133
Pro-face HMI B.V. Germany
Konigstr. 31, 70173 Stuttgart GERMANY
Tel: +49-(0)711-227-1020 Fax: +49-(0)711-227-1021
[email protected]
United Kingdom
Pro-face UK, Ltd.
The Venture Centre, The Science Park, Coventry CV4 7EZ ENGLAND
NP000223-GPALL-02E12
Today's rapid pace of high-tech innovation
has increased the need for industrial
automation.
Pro-face's "GP Series" programmable
Pro-face's New GP77 Series Operator Interfaces with Super
High-Speed 100 MHz RISC CPU
High Performance
Interface GP77 Series
operator interfaces, in pursuit of more
comfortable
communication
between
human and machines, have been striving
GP77 Series
Standard Features
for the best: high performance and
advanced design.
Going through a series of innovation, GP
Evolving HMI-from PLC's
"Face" to its "Brain"
Series have gained popularity among
many users.
"From PLC's Face to its Brain" - Pro-face's
lineup of new concept programmable
Allows you to monitor your
production site information
in real time!
display panels each pursues the primary
goals of the next generation of industrial
automation,
"Faster,
Smarter,
and
Save Development
Time and Space
while Improving Operability
Brighter".
GP-PRO/PB for
Windows Ver. 4.0
Version Up Features
GP-PRO/PB for Windows
Standard Features
Wide Range of Supported
Data Formats
Fieldbus Network and
Peripheral Connections
Connections
Global Safety Standard
Compliant Products
Global Support Network
Specifications
Programmable Operator Interfaces
Pogrammable Operator Interfaces
100MHz RISC CPU
Resolution : 640 x 480 pixels
10.4 inch STN Color LCD
FLASH EPROM 2MB
(Screen Memory)
100MHz RISC CPU
Resolution : 640 x 480 pixels
10.4 inch TFT Color LCD
FLASH EPROM 2MB
(Screen Memory)
100MHz RISC CPU
Resolution : 320 x 240 pixels
6 inch TFT Color LCD
FLASH EPROM 2MB
(Screen Memory)
100MHz RISC CPU
Resolution : 640 x 400 pixels
9 inch High Intensity EL
FLASH EPROM 2MB
(Screen Memory)
100MHz RISC CPU
Resolution : 320 x 240 pixels
6 inch Monochrome LCD
FLASH EPROM 1MB
(Screen Memory)
100MHz RISC CPU
Resolution : 320 x 240 pixels
6 inch STN Color LCD
FLASH EPROM 1MB
(Screen Memory)
Ultra-fast 100MHz
RISC CPU equipped
2 times brighter / 30,000
hours backlight lifetime
Quick startup and screen change for
smooth operation!
3 times faster overall performance.
2 times brighter display and 1.5 times
longer backlight lifetime.
High Quality Asian Fonts
Back light Burn-out Detection
Chinese, Korean and
Taiwanese fonts displayed on
GP377 S/L units are,
now, available with smoother
quality of 32 x 32 dots.
For your safety operation, the
backlight can be monitored on the
front panel LED with the Touch panel
Input control settings.
Compared to GP-370S and GP-370L.
24 hours/day use at normal operating temperatures.
(Model: GP377RT-MLTE41)
Only for GP-377R
2-Way (via Ethernet)
communication
Printer I/F
CF card support
Programmable Operator Interfaces
Programmable Operator Interfaces
Programmable Operator Interface Revolution!-GP77R Series
Intelligent operator interface
The GP77R Series
Fast screen changes for smooth
operation
Clear viewing
in bright areas
Create active and
vivid applications
New 100MHz chip is 3 times
faster!
Both TFT and STN displays are 2
times brighter
64 color TFT and STN
Displays
The GP77's RISC CPU calls up and opens
screens in a flash, providing smooth, "no-wait"
operation.
The GP77's screens are twice as bright as
GP70 series units, and rival that of a
standard CRT.
The GP77R's easy-to-read 64 color
display allows you to create dynamic
application screens.
Compared with GP70 series unit running demo application.
Reduces overall debugging and
maintenance time
Data transfer is twice as fast
The GP77R's blistering 115.2 Kbps speed
cuts your PC to GP data transfer time in half.
It also means you spend your valuable time
maintaining and debugging, instead of waiting
for data to download or screens to change.
Compared with GP70 series.
Pro-face's GP77R series units help you meet the recent demands
put on the workplace by ISO, PL and HACCP requirements. Proface's new hardware and software allows you to easily collect vital
historical production maintenance data, and helps you perform
essential preventive maintenance.
The newly developed GP77R panel transforms the role of an HMI
from the "face" of the PLC to its "brain". This adds up to significant
cost and man-hour savings for the management and control of your
processing information.
Furthermore, the combination of high-speed I/O control between
these units and connectable PLCs, and the GP77R's enhanced
"intelligence" ensures that your applications perform better than
ever.
Calculation
Data Processing
Data Filing
Communication
I/O Conttol
Calculation
Data Processing
Data Filing
Communication
Operator I/F
Operator I/F
I/O Control
Adjusts to any environment
Select from 4 brightness levels
Intelligent Features
You can easily adjust the GP77's brightness
level to fit your operation needs.
GP-477RE has 2 levels of brightness.
Logging Function
Alarm types are
recognizable at a glance
Type R
115.2Kbps
Ethernet
This software allows you to share data
with PLCs with no network capability, or
between different makes and types of PLCs.
Ethernet
Ethernet
Screen data ON/OFF blinking speeds
are selectable (slow, medium, fast),
making alarms and data easy to
recognize.
38.4Kbps
2-Way Communication
Provides production setting data quickly to
PLCs in a Flexible Manufacturing System.
Preset values and process conditions can
be easily replaced at any time.
Separate Programs
3 Flashing speeds
GP70 Series
Recipe Function
Allows you to easily report production
information directly from your factory floor.
PC
Memory
PC
Back up
Memory
or
CF card*
Available with GP-577RT, GP-577RS and
GP-377RT/S only.
Printer
Back up
Memory
or
CF card*
Printer
Some PCs do not support 115.2kbps data transfer.
High speed GP - to PLC
communication
Built - in 2- port Function
In addition to improved brightness,
backlight lifetime is significantly longer than
GP 70 Series units. Backlights are also userreplaceable and easily changed.
GP77 Series supports high speed RS232C data transfer (115.2kbps)
The 2-port function, using the "Data
Transfer Cable" and "Programming I/F
Cable", allows direct connections
between GP and a Mitsubishi PLC.
This reduces your connection costs.
PLC
Memory
Maker A
Maker B
Maker C
2Way Communicator
Memory
Long - life backlight
PLC
Memory
Memory
PLC
PLC
Memory
* Optional Multi Unit E required
PLCs supporting 115.2kbps
Matsushita FP10SH
Mitsubishi MELSEC QnA series
OMRON CS-1
Sharp JW30 series
New Products Supporting the GP77R Series Evolution
Screen editor software
No 2-port adapter required.
Data collection Software
(GPW-PB01M-V40 or higher)
GP-377 RT (50,000 hours)
GP-577 RT (40,000 hours)
GP-377 S/L (30,000 hours)
GP-577 RS (25,000 hours)
(PSW-ED01-V20 or higher)
Built-in 2-port function
Programming
tool
For more details, please contact your sales
representative or Pro-face.
except GP-377RT.
Time required for backlight brightness to decrease 50%.
This software allows the GP77R to act as a "Ethernet
gateway" and provide programless data communication
between a host PC, GP77R and multiple different PLCs
via an Ethernet network.
Large size / Medium size Multi Unit
Expansion unit
(GP077-MLTE41
GP377R-MLTE41)
(10BASE-T)
(Model: GP070-ET41)
Mitsubishi PLC
2-port adapter
Data transfer cable
Programming I/F
cable
Ladder
programming tool
Mitsubishi PLC
Programmable Operator Interfaces
Features include the ability to Log and File PLC
information. Helps to reduce PLC ladder programming
processes/steps and amount of memory used.
100MHz RISC CPU
Programmable Operator Interface
The optional Multi Unit E
expands the GP77R
Series connectivity with an
Ethernet I/F. CF card I/F
and Sound output I/F for
GP477R/GP577R and
Printer I/F for GP377RT.
Programmable Operator Interfaces
Photo: Multi Unit E
(Model : GP377R-MLTE41)
This interface unit allows
GP to transmit data with
the host via Ethernet
Network.
2-Way Data Collection Software
Pro-Server with Pro-Studio V2.0
Production
Control
Downsize and Simplify Your Application
Ensures precise alarm
control. Voice alarm and
alarm displays are
automatically executed.
Allows you to
easily create
daily and
monthly reports.
Using the GP Series keep your systems as compact
as possible, even though your control programs get
more and more sophisticated.
The touchpanel graphic operator interface, GP Series,
is a state-of-the-arts intelligent equipment, which has
been widely installed as a main operator panel
throughout the manufacturing fields. You can operate
production systems via numerous data and graphics
displayed on the screen, while reducing numbers of
control programming and wiring.
Allows you to
easily give
instructions and
collect data for
production line.
Simple Communication Methods
Exchanges data
with network PLCs.
Collects PLC data via
MS Excel.
[Direct Access Method]
Collects event data
from PLC via MS
Access.
Collects GP-acquired
data via MS Excel.
Sends and receives
PLC device data via
MS Access.
Sends and receives
GP filing data via MS
Excel.
Logging Data
storage in GP
memory
and/or CF
card.
Work/
Production
site
information
Filing data
storage in GP
memory
and/or CF
card.
Program-less data
communication
Program-less data
communication
Simply select your target PLC when you create screen
data. The Direct Access method allows the GP to
communicate with Word and Bit devices in the PLC
memory directly. Since this method is, also, called as
a program-less communication, there will be no extra
load on the PLC.
[Memory Link Method]
You can create your own communication programs to
connect the GP with your specialized controllers, such
as single-board computers and PCs. The GP displays
data mapped from the host's memory for monitoring
and operation.
Create Unique Screens in Minutes
A company PLC
B company PLC
Polling (Optimization Function)
Data can be read from multiple GP units simultaneously, thereby
reducing the number of data read requests from an application.
Improves data read performance when using multiple GP units.
Security Function
C company PLC
You can simply and freely create your own operation
screens for each requirement in your applications,
using a variety of powerful tools, such as the Part Box,
Tags and D-Script macro program, on the GP-PRO/PB
III for Windows software. The software creation of the
operator interface also, allows you easy change,
debugging and reuse of the data whenever required.
Passwords are used to prevent data access by personnel other
than system administrators, thereby protecting data from problems
such as device overwriting, etc.
CF Card File Transfer Function
Meter Graphs
Logging, filing and alarm data that has been "filed" via the GP's
screen editor software can be transferred to another GP77R unit's
CF card using an Ethernet network.*
* requires installation of Multi Unit E.
ISO-7000 Symbols
Minimize Your Work for Maintenance and Sytem Expansion
OPC Compatible (OLE for Process Control)
Microsoft's object technology OLE/ActiveX allows manufacturing
related industrial applications to be easily connected.
Device Monitoring Function
Since PLC devices can be monitored by simply selecting a symbol,
on Pro-Studio a simple simulation can be performed prior to starting
an application. With this function, multiple screens can be displayed
at one time, and the IP address and device address can be input.
Programmable Operator Interfaces
After creating screen data, just download it to the GP
unit, then connect the GP with the host via a single
cable for immediate operation. You can, also, simulate
the GP with your PC for quick debugging, before you
take it to the field.
Programmable Operator Interfaces
GP Series Screen Editor Software
Improve your efficiency by reducing the amount of
repetitious Alarm message editing and registration.
Use Your Device Addresses More Efficiently
Global Cross-references!
Version 4.0 allows easy editing and document control via CSV format data.
Maintenance is
easier than ever!
System Upgrades
Are Easier!
(List display)
Using the CSV format, alarm files can be exported to the spread sheet software such as MS-Excel ,
where alarm messages can be added and edited more efficiently. Once this work is completed, these
CSV format files can then be imported back to GP-PRO/PB for Windows as Alarm files.
(Map display)
All of a project's
device addresses can
be checked at a
glance.
Device address usage
can also be displayed as
a chart, allowing you to
easily find unused
addresses.
Spread Sheet
Quickly Check Load Screen Nesting Levels
[Logging]
Improved data collection
via "Looping"
Nesting List
Version 4.0 can create a Nesting List for complex project screens containing multiple
Load Screens. This will speed up your screen editing as you no longer need to
spend time searching for a load screen's original data.
When the acquired logging data exceeds the GP's
memory capacity, data logging can continue by
simply overwriting the previously acquired logging
data. Also, logging data can be saved automatically
to a CF Card with a simple setting.
[D-Script]
Try These Useful Functions!!
Direct Entry of Drawing Object Coordinate
Values
Fine-tuning the position and
layout of your screen objects on
screen grid points via a mouse Move by a dot
could be difficult. Version 4.0
allows you to use your
keyboard's arrow keys to
enlarge and move objects
easily, making detailed screen
creation and layout easier than
ever.
Cursor Position Zoom
[Filing]
Transferable data items are increased.
The number of data items that can be transferred at one time has been
increased to 1000 words.
Multiple Data Filing Folders.
Multiple folders of filing data can be stored in both the CF-Card and the
GP's internal memory.
Enhanced Data Editing and Functionality
Enlarge and Move
Objects Via Your
Keyboard Cursor
Enlarges the area where the
cursor is currently positioned 3
times, allowing easy editing of
detailed screen drawings.
Alarm Editor Screen
Enlarge by a dot
Hairline Cursor
Use this cursor as a
standard when you align
screen objects.
To change an object's
position or size, just enter
the object's coordinate
values, guaranteeing
100% accurate screen
layout.
Font Selection and
Mark Screens
Windows fonts can be
imported as character data to
a project's Mark screens via
the font selection function,
allowing you to create
screens with a variety of types
of characters.
Programmable Operator Interfaces
Memory Batch Copy
Memory Block Initializatio
Loop Processing
Address Offset Designation
Text Images
[Wide Variety Files of Images]
270 of 64-color Part images are
odded for more sophisticated
screens of your applications.
GP-X10 Series screen data
can be converted easily!
Up loaded from GP-X10 units to GPPRO/PB for Windows V4.0 directly and
converted for the later GP models.
GP-*10
Screen Data
GP-PRO/PB
for WindowsV4.0
[Useful Sound Messages ]
Ready-to-use 270 message samples in
the WAV format are provided.
Alarm has occurred. Confirm
status.
Return lowering elevator to
upper limit position.
Now opening entrance door.
Now raw materials available.
Starting operation.
This card cannot be used.
Temperature alarm.
Conveyor is operating.
Careful - Now rotating.
Add material to hopper.
Programmable Operator Interfaces
20 pixels
High Resolution Touch Grid
20 pixels
Adjustable Switch Sizes and Layout
Minimum Touch Switch Size: 20x20 pixels
1 or 2 point touch selectable
Efficient Screen Editing Saves You Time!
Create Screens in Minutes
Parts
Placement
Select from over 1800
pre-made Parts. Choose
only the ones you need
and place them on your
screens.
High-level Functionality
Switch size settings
are freely adjustable,
which allows more
flexible screen layout.
More Sophisticated Programming
Libraries
Tag Setup
D-Script
Multiple objects can be
grouped and registered
for your own library.
A wide variety of user
applications can be easily
created using the Tag
functions (active screen).
Easy to use Macro
program reduces the host
controller's programming
load.
Simulation
Documentation
Reduces GP program debugging time
[Automatic Documentation]
Even if you don't have a PLC available to test your new GP
program, you can still quickly and easily check whether the
program works as planned via this feature.
Reduces time required for creating documents
*This feature is not available with Memory Link selection.
Parts
[1,800 Part to Choose]
Touch/Switches/Lamps/Graphs/Numeric Displays/Picture Displays/Alarm Displays/Data Displays
Over 1800 parts and symbols are
stored in the GP-PRO/PB library.
Just select the ones you need and
place them onto your application
screens.
Switches
tank graphs
Lamps
Library Parts
[Historical Alarm Display]
[Alarm Summary]
An easy way to troubleshoot
machine problems!
Allows easy machine condition monitoring and fast maintenance
Alarm Types:
summary display,
message scrolling
Sub.Windows
can be easily set
up for detailed in
matim
Display Types: Active, Historic, Log
Time format: hours, minutes, and
even seconds* can be displayed.
* Not supported by GP-270 Series.
Just by selecting the items you wish to print out, you can
create specification and manual documents easily. You can
also use this feature to export project data in RTF format.
Just select from the menu...
Printout
Display screens can be easily printed
out for daily reports.
* Supported only by large-sized GP units
GP377RT requires the Multi Unit E.
Sub-Window Image
Detailed information for an individual alarm message can be displayed in a subwindow. You can easily create an on-line manual for quick maintenance.
Data Storage
Alarm data can be backed up in GP's
backup memory.
All supported
PLCs are OK!
[Picture Display]
Enable to visualizes entire systems
* This feature is supported only by certain largesized GP and GP377 series.
Graphics:
Dot, Line, Polyline, Square/Rectangle,
Fill, Polygon, Circle, Oval, Arc, Pie,
Scale, Mark, ISO-7000 Mark Libraries
Attributes: Lighted, blink, reverse, off
[Text Display]
Multiple character sets supported
Export in RTF format
File Management
[Project Manager]
Project
Simplifies Project Screen Management
Screen
Type
Screen data can be managed via individual screen files.
In addition to moving or copying screen data, simply
double-clicking on a file name allows you to edit that
screen. You can also make data files sharable through
your PC network.
* Individual data files cannot be opened by multiple PCs at the same time.
Programmable Operator Interfaces
... and print!
Fonts: ASCII (English & European)
Chinese, Japanese, Korean, and
Taiwanese fonts
Font Styles: Normal, Bold, Raised
[Image Display]
[Graph Display]
Photo and CAD images can be imported
Various Types of Graphs to Visualize Important Data
Data Format : 16-bit absolute/indirect data
Data Display Format : Binary, BCD
Warning Display : direct/indirect
setup for maximum and minimum
ranges
Copy to another
project
Open a screen with
a double-click
BMP image display
DXF image display
Importable Files
DXF: Common file format for CAD and 3D screens
BMP: Image format for pictures from digital cameras or image scanners
Graph Level Status by Colors
Fill-Below-Line for Trend Graph
Tank Graph (Library parts)
Meter Graph (parts)*
* These features not supported by GP-270 Series
Programmable Operator Interfaces
Screen Editing
Sound Output Function
[Duplicate Copy]
An optional unit allows WAV format files
(i.e. sound, alarm) to be imported to the
GP, and played through an external
speaker. This feature can be used in a
variety of applications, such as multimedia, and machine operator information.
Specifying the number of columns and
rows to be multiplied will allow you to
easily make multiple copies of any
object. Address incrementation can also
be performed automatically.
CF Card Support (Compact Flash)
Filing CSV data
Trend data, sampling data and alarm active/history/log data can all be exported to the CF card
using the CSV file format. Database and spread sheet applications can then easily import this
data for information management and processing.
Screen Data Storage
* Multi Unit E required available with GP-477R / 577R
A Screen project on GP unit can be copied on a CF card for maintenance purpose. Prior to copying
the project to another GP unit system, set up on the GP unit is required.
Duplicate Copy
Enlarging and Reducing
Drawing Area
[Object Drawing]
[Active Window]
With a rich array of drawing
tools, screens can be drawn
quickly and easily -- like CAD
software.
Memory Expansion on CF card.
In addition to the internal memory on GP unit, following data can be stored for GP operation :
Filing Data
Logging Data
Sampling Data
Trend Graph Data
Alarm Data
Image Data
Sound Data
Screen Project Data
[Video Display]
Up to 3 window screens can be displayed,
a single base screen,
all simultaneously displaying animated data.
Global Window: (1/screen) A
common window for all screens
Local Window: (2/screen) Unique
window display for each screen
Screen overlay order can be
changed with a touch
Video feeds provide live data
* This feature is only supported by GP-570VM.
Video Display Size: standard mode,
zoom mode
Transparent display of Video Window
3 NTSC video input channels
VGA display (640 x 480 pixel)
* Multi Unit E required
Dynamic Link between Operations and Control
Simple input/output operations can be performed
by merely dragging and dropping. You need no
knowledge of programming.
VM screen
VGA screen
Powerful Programming Tools
["D-Script"-Macro Programming
Language]
[Tags]
Tags are used for the creation
of your screen animation
functions. 30 different tag
functions have been prepared
for the GP Series units.
Combinations of these tags
produce a wide variety of
functionality, allowing you to
expand the scope of your
applications.
* Depending on the GP models,
supported Tag features vary.
Tag Features
Touch Switch
<touch panel input>
<keyboard setup>
<selector switch input>
<inching function>
Numeric Display
<numeric display>
<static data display>
<alarm boundary display>
Graph Display
<graph display>
<static graph display>
<static data display>
Trend Graph Display
Setting Input
<key input>
<keyboard setup>
<alarm boundary>
Alarm Summary
<alarm summary text display>
<alarm summary display>
Alarm Message Display
Graphic Display
<object drawing>
<library display>
<library status display>
<mark display>
Animated Objects
<free library display>
<moving mark display>
<rail settings>
Character Display
<string display>
<display text data>
Time Display
<time display>
Device Write
<write to device>
Window Display
<window display>
Video Window Display
<video window display>
All the data required for the parts on the screen
(addresses, name plates, and names) are
automatically passed by dragging and dropping
the corresponding symbols created on the ladder
over the screens of the GP-PRO/PB for
Windows. You no longer need to prepare
detailed design specifications to notify
addresses. This allows for implementing the true
integration of display and control features,
increasing the work efficiency greatly, and
reducing the number of processes significantly.
Universal File Format Support
Reduces Data Duplication
BMP
Implement a variety of simple control tasks with this
powerful tool
Features include:
Math: +, -, *, /, Remainder, Assign
Boolean: AND, OR, NOT,<,<=,>,
>=, EQUAL, NOT EQUAL
Triggers: Timer settings, Bit Rising, Bit Falling,
when expression
becomes
True/False
Functions: Load
screen, Draw
Text
DXF
CSV (chart)
WAV (sound)
* Some of the above
features are not
supported by GP-270
Series units.
Screen Data from all previous GP Series can be converted to the latest models, also.
Programmable Operator Interfaces
Programmable Operator Interfaces
RTF
Interfaces
Direct Connection to Field Network
[Peripheral Device Connections]
[Profibus-DP]
[DeviceNet]
[Interbus]
Profibus-DP I/F Unit (GP070-PF11)
Device Net Unit (GP070-DN41)
Interbus Unit (GP070-IB41)
Max.Baud Rate
12Mbps
Max.Node
64
Max.I/O
IN:64 Words
OUT:64 Words
Max.Baud Rate
500kbps
Max.Node
64
Max.I/O
IN:127 Words
OUT:127 Words
Max.Baud Rate
500kbps
Max.Node
512
Max.I/O
IN : 64 Words
OUT: 64 Words
Direct Connection to Various Networks
Communication Module Interface
Direct connection to various Field networks
becomes possible by attaching communication
modules.
(Example: GP-675T Rear face)
Real-time Operation
[Units Supported]
SIEMENS
SIMATIC S7-300/400 Series, as well as other ProfibusDP supporting PLCs.
Communication Module
Auxiliary Input / Output (AUX)
Communication Module Interface
From the touch panel, you can send information
to the PLC or to a machine's DIO I/F in real time.
* Only supported by GP-47* or larger units
(Touch output: 8 points; system alarm output:1-point; buzzer
output: 1-point; RUN output: 1-point; remote reset: 1-point)
* Only supported by GP-47* or larger units
Auxiliary Input/Output (AUX)
Signal Tower
Buzzer, etc..
DC24V Parallel
I/F cable (user made)
* Only supported by GP-470 or larger units
Communication with a Host Controller
Serial (SIO) Interfaces
A single cable is all you need for host
communication, reducing maintenance time.
Connecting to a Color Printer
[Ethernet]
[CC-Link]
[T-Link]
Printer Interface
GP Ethernet I/F Unit <10-Base-T>
CC-Link I/F Unit (GP070-CL11)
T-Link I/F Unit (GP450-ZB21)
You can printout GP screens while in RUN
mode. Alarm history data, including
trigger/recovery times can also be printed.
(GP070-ET41)
Max.Baud Rate
Max.Node
Max.I/O
10Mbps
64
IN:128 Bits
OUT:128 Bits
Max.Baud Rate
Max.Node
500kbps
64
[Units Supported]
Fuji Electric Co., Ltd.
MICREX-F Series PLCs
Screen Data Transfer
Host Controller
Serial Interface
RS-232C (Max 15m)
RS-422 (Max 600m)
* Host controller connection distances differ
PLC
Single board
Computer
PC
Printer
Printer Interface
Tool Connector
* Only supported by GP-47* or larger units
This interface is used for transferring screen data
created by GP-PRO/PB Series. Also, you can
connect a bar-code reader to the GP.
[Units Supported]
Mitsubishi Electric Corp. PLC
MELSEC A Series
MELSEC QnA Series
Data Transfer Cable,
etc..
PC Screen Data
VGA Input Interface
Tool Connector
Data Transfer Cable
Memory Loader II
Bar-code Reader
Your PC's VGA screen can be displayed on GP570VM unit.
(GP-570VM)
Connectable Barcode Readers
Video Display from Cameras
and Recorders
NTSC Video Input Interface (3 channels)
NTSC Video images can be displayed in a
window on certain GPs. Window display size
and position can be changed, in addition to
zooming and channel switching, from touch
panel operation or host controller.
* The above communication interface modules are only for GP-470 or larger units.
Additional Fieldbus Network Units Supported:
Fieldbus
AB Remote I/O
AB DH+
ModbusPlus
(These features are only supported by GP-570VM unit.)
Module *1
GP Model
QPI-ABR-201
GP47*/57* series GP470/570,GP477R/577R Series
QPJ-ABR-201
GP270/370 series
QPI-ABD-201
GP47*/57* series GP470/570,GP477R/577R Series
QPJ-ABD-201
GP270 series
QPI-MDP-201
GP47*/57* series GP470/570,GP477R/577R Series
QPJ-MDP-201
GP270 series
Make
Touch Type
Handheld Type
Fixed Type
VGA Input Interface (3ch)
RGB Cable (commercially available type)
CCD Camera, VTR,
TV output, etc..
PC
Only for GP-570VM unit.
*1 Manufactured by Total Control Products, Inc.
Programmable Operator Interfaces
Welcome Design
Model 1090
Model 1240
Model 1045
Programmable Operator Interfaces
VGA
Interface
Connectable PLCs and temperatur Controllers
Fanuc
FATEK
Series Name
FANUC Power Mate (Motion Controller)
FANUC Series
CPU
Power Mate-MODEL D
16-MC
Series Name
Facon FB
MICREX-F
Programless Communication
Fuji
Data inquiry
The direct access method supports 76 protocols for PLCs
from 25 manufacturers world wide, meeting diverse
requirements of customers.
FLEX-PC
* For the supported PLCs, see the table provided on the right. For further details of
each PLC, contact your local GP distributor.
I/O
memory
table
Response
Series Name
Series90-30
GE Fanuc Automation
HIDIC-S10
Connections with Multiple PLCs
Direct Connection with a PLC
Multi-link Connections
Neither a dedicated device nor a special
program is required.
Multiple GP series units may be directly connected at
ease to a single host (computer) link unit for PLCs by the
direct access method without using any dedicated device
or special program.
* For multi-link connections, it is recommended that our multi-link cable
(GP230-IS12- O) or RS-422 terminal bracket conversion adapter (GP070CN10-O) is used.
* For applicable PLCs, see the table provided on the right. For further
details of each PLC, contact your local GP distributor.
Host PLC
link unit
Maximum extended length of
RS-422 cable: Max 600 meters
System configuration at low costs
Hitachi
GP series
(up to 16 units
may be connected)
HIDIC H
The supported protocol allows the GP series unit to be connected
directly to the CPU programming port.
* Applicable PLCs: PLC MELSEC A series/QnA series/FX series of Mitsubishi Electric Corp.
HIZAC EC
S10mini
Connected to a peripheral device
PLC
programming
software
FA-2J
Izumi
FA-3S
MICRO 3
Series Name
RS-422 cable
for two-port
adapter II
(GP070-MDCB11)
Keyence
Koyo/
PLC Direct
Matsushita
Electric Industrial
Matsushita
Electric Works
Barcode reader
Mitsubishi
MELSEC-F2
[Easy Backlight Replacement]
MELSEC-FX
* Not available with GP-570L, GP-H70 and GP377RT Series units.
MELSEC-QnA
[IP65f Rating]
* Prior to using this tool, the GP must be set up.
* Please check the version for applicable GP unit.
* Does not include GP-H70 Series unit.
Programmable Operator Interfaces
Modicon
AB PLC-5
Link
Direct
Series Name
Modbus Master
Modbus Slave
884/984
CPU
A2A
A3A
A2U
A4U
A2U-S1
A2US
AZUS-S1
AZUSH-S1
A2SH
A3U
A0J2
A0J2H
A1N
A2N
A3N
A3H
A2CJ-S3
A1S
A1SH
A1SJ
A2CCPUC24
F2-20M
F2-40M
F2-60M
FX0
FX1
FX2
FX2C
FX2N-64MR
FX2NC-32MT
FXON-60MR
A1FX
FX2N
FX2NC-64MR
Q2A
Q2A-S1
Q2AS
Q2ASH
Q2AS-S1
Q3A
Q4A
CPU
CPU
SLC-5/01
SLC-5/02
SLC-5/03
SLC-5/04
PLC-5/11
PLC-5/20
PLC-5/30
PLC-5/40
PLC-5/40L
PLC-5/60
PLC-5/60L
Link
Link
Direct
Sharp
New Satellite JW
Shinko
Series Name
SELMART
Multilink
Series Name
S5
Siemens
(SIMATIC)
S7-200
S7-300
S7-400
Link
Direct
Multilink
CPU
90U
95U
100U
115U
135U
155U
CPU212
CPU214
CPU312IFM
CPU313
CPU314
CPU315
CPU315-2DP
CPU413-2DP
Series Name
PROSEC EX
DH+
PROVISOR B
Multilink Ethernet CC-Link
Prgm Port
PROVISOR TC200
Toyota
TOYOPUC-PC2
CB Series
SR-Mini
Series Name
CPU
U84
U84J
U84S
GL40S
GL60S
GL60H
GL70H
GL120
GL130
CP-9200
CP-9200H
CP-9200SH
Micro
PROGIC-8 PC01
MP930
MP920
Memocon-SC
Yaskawa
Control Pack
Memocon Micro
PROGIC-8
FACTORY ACE
Series Name
Direct
Modbus Plus (n:m)
Yamataka
884
984 A/B
SDC
CPU
FA500
FA-M3
Link
Direct
Link
n:1
Device Net
Link
Direct
Multi-Link
Link
Profibus
MPI
Multilink
Interbus
Ethernet
Link
Link
CPU
SDC20
SDC21
SDC30
SDC31
SDC40A
SDC40B
SDC40G
* These drivers are included in the "GP-PRO/PB ML for Windows" Version 4.0 software package. Please check with your local Pro-face distributor for recently available drivers not listed here.
* Each driver requires its own communication cable. Also, some drivers require an additional interface unit. For detailed information, please refer to the GP-PRO/PB
"PLC Connection Manual".
* n:1(Multi-link) = multiple GP : 1 PLCs * 1:n = 1 GP : multiple PLCs * n:m = multiple GP : multiple PLCs
Programmable Operator Interfaces
Multilink Device Net
1:n
1:n
CPU
CB-100 Z-1021
CB-400 Z-1021
CB-500 Z-1021
CB-700 Z-1021
CB-900 Z-1021
H-PAP-A Z-1021
Series Name
Yokogawa
Remote I/O
CPU
PC2
L2
PC2J
PC3J
TOYOPUL-PC3J
Series Name
Multilink
CPU
TCCUH
TCCUL
Series Name
RKC
3964/RK512
Link
Series Name
Toshiba Machine
DH485
Link
CPU
EX2000
T2E
T2N
T3
T3H
B200CH
B200CUF
B200CURM
B200CUFRM
PROSEC T
Direct
Direct
CPU
SELMART
Toshiba
Link
Ch.0
CPU
JW20
JW-32CUH
JW50
JW70
JW100
JW-32CUH1
JW-32CUH3
Series Name
CPU
FP3/5
FP10(S)
FP1
FP-M
FP10SH
FP2
FPQ-C32CT
FPQ-C16T
MEWNET
MELSEC-A
All GP units are suitable for installation
in machines used in wet or dusty
areas. (Applies to the front panel of a
unit mounted in a flat panel)
Rockwell
Link
Uo to 32 GPs may be connected to a single host computer
Memory Loader II (GP070-LD01-O)
You can transfer GP screen data to an Flash
Memory Card via on the Memory Loader II. This
allows you to update GP screen data without a PC.
This device is also handy for duplicating applications.
AB SLC500
Link
CPU
CPU11
Series Name
E1
Series Name
CPU
P7000-PLC-001
P7000-PLC-031H
P7000-PLC-031S
P7000-PLC-A01
Series Name
[Screen Data Exchange]
ORIM VEXTA
Series Name
Memory
table
Service personnel can easily repace the backlight right on the factory
floor, reducing maintenance time.
SYSMAC CS1
Link
Data
table
GP Maintenance
SYSMAC CV
Multilink Device Net
CPU
SG-8
SU-5/6/6B
SZ-4
SR-21/22
D2-240
D3-330
D4-430/440
Panadac 7000
SYSMAC
Direct
Series Name
KOSTAC SG
KOSTAC SU
KOSTAC SZ
KOSTAC SR
DL-205
DL-305
DL-405
Series Name
Single-board
computer
Link
Direct
Link
CPU
KZ-300
KZ-A500
KZ-350
KEYENCE
Memory link expansion capability:
Multiple GP units may be connected to a single personal
computer or microcomputer board.
Graphic data can be transferred from the host controller to
the GP unit.
The transmitted and received data can be checked for errors
including those in check sums, CR, LF, ACK, and NAK.
SYSMAC CCS1
CPU
PF2-CPU1
PF2-CPU5M
PF2J-CPU1
PF3S-CP11
PF3S-CP12
PF3S-CP13
MICRO 3
FA-2
This compact adapter allows you to
use both the GP series unit and the
PLC's peripheral units for the efficient
transfer, monitoring, and debugging
of a PLC program.
The direct mode can be selected
for high-speed communication.
Isolaed signals via 2 port Adapter,
avoids noise interference to PLC
CPU.
Omron
CPU
2 /2 E
4 /4 F
H20
H28
H40
H64
H-200
H-252C
H-300
H-700
H-2000
H-2002
H-4010
EH-150
EC-40HR
S10min
Series Name
2-port Adapter
GP series
* The GP430-IP10-O and GP430-IP11-O are not
applicable.
* For further details of each PLC, contact your local GP distributor.
* Applicable PLCs: PLC MELSEC A series/QnA series/FX series of Mitsubishi Electric Corp.
RS-422 cable
(GP230-IS12-O)
GP series
Direct Connection with the CPU Programming Port
Direct
CPU
C20H
C28H
C40H
C120
C120F
C200H
C200HS
C500
C500F
C1000H
C1000HF
C2000
C2000H
CQM1-CPU11
CQM1-CPU42
CPM1-20CDR-A
SRM1-C02
CPM2A
CS1H
CS1G
C200HX-CPU64
C200HE-CPU42
C200HG-CPU43
C200HX-CPU85-Z
C200HX-CPU44
C200HG-CPU63
C200HE-CPU42-Z
C200HX-CPU64-Z
CV500
CV1000
CVM1
CS1H
CS1G
SYSMAC C
CPU
CPU311/CPU331
CPU731/732
CPU771/772
CPU781/782
Series90-70
Series Name
Link
Series Name
Direct
T-Link
CPU
F30
F50
F60
F80
F80H
F81
F120
F120H
F120S
F200
F250
F70S
NB1
NB2
NB3
NJ
NS
Connection with a PLC
Host controller
Direct
CPU
20MC
Series Name
Connections with many different types of PLCs
throughout the world
Link
Direct
1:n
n:m
Multilink
Ethernet
1:n
GP77 Series
GP-577RT
GP 70 Series 5"/6"
GP-577RS
GP-477RE
GP-H70L
GP-270S
GP-270L
GP-370S
GP-370L
GP-H70S
UL/c-UL
CE Marked
Units
12.1"
10.4"
GP-377RT
GP-377S
GP-377L
GP70 Series 9"/10.4"/12.1"
9"
6"
5"
GP-675T
TC21-24VP
SC21-24VP
TC31-24V
SC31-24V
EG21-24VP
EG31-24V
SC21-24VP
LG21-24VP
SC31-24V
LG31-24V
GP-675S
Pro-face HMI B.V. Scandinavia
GP-571T
GP675T
GP675S
GP577RT
GP577RS
GP571T
GP570VM
GP570T
GP570S
GP477RE
GP470E
GP377RT
GP377S
GP377L
GP370S
GP370L
GP270S
GP270L
GP-H70S
GP-H70L
GP-570VM
Pro-face HMI B.V.
GP-570T
Pro-face UK
Pro-face America, Inc
Digital Electronics Corp.
Pro-face France
Pro-face HMI B.V. Germany
GP-570S
GP-470E
Pro-face HMI B.V. Italy
Pro-face Korea Co., Ltd
Pro-face Taiwan Co., Ltd
Programmable Operator Interfaces
Programmable Operator Interfaces
Approved Units
Functional Specifications (10.4'' and 12.1'' Display )
Functional Specifications(GP77 Series Units)
Model
Item
Type
Colors
Backlight
GP577R-TC11
GP577R-TC41-24VP
GP577R-SC11
GP477R-EG11
GP477R-EG41-24VP
GP377R-TC11-24V
GP377R-TC41-24V
GP377-SC11-24V
GP377-SC41-24V
GP377-LG11-24V
GP377-LG41-24V
TFT Color LCD
STN Color LCD
High Intensity EL
TFT Color LCD
STN Color LCD
Monochrome LCD
64 colors (Tiling patterns make blends of colors possible)
black and white
64 colors (Tiling patterns make blends of colors possible)
CCFL (under normal
temperatures and humidity,
lifespan = more than
40,000) User replaceable
Amber
CCFL (under normal
temperatures and
humidity, lifespan =
more than 50,000)
CCFL (under normal
temperatures and humidity,
lifespan = more than
25,000) User replaceable
Display
640 x 480 pixels
640 x 400 pixels
320 x 240 pixels
211.2mm(W) x 158.4mm(H)
192mm(W) x 120mm(H)
115.2mm(W) x 86.4mm(H)
Contrast Control
800 x 600 pixels
246mm(W) x 184.5mm(H)
Blink / Reverse Video
Contrast Adjustment
8 levels from touch panel
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1
Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
8 levels (via touch panel)
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1
Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
No. of
Char.
Display
80 characters per row, 60 rows
80 characters per row, 50 rows
40 characters per row, 30 rows
80 characters per row, 30 rows
80 characters per row, 25 rows
40 characters per row, 15 rows
40 characters per row, 30 rows
Font Sizes
20 characters per row, 15 rows
40 characters per row, 25 rows
2MB FLASH EPROM
32 x 24Keys/ screen; 1 or 2 point touch
100 characters per row, 75 rows
80 characters per row, 30 rows
100 characters per row, 37 rows
16 x 16 dot font
40 characters per row, 30 rows
50 characters per row, 37 rows
Character Size: Height and Width can be expanded 1, 2, 4, or 8 times.
Application Memory
1MB FLASH EPROM
2MB FLASH EPROM
Touch Panel (Resistive Film)
32 x 24 keys/ screen;
1 or 2 point touch
40 x 30 keys/ screen; 1 or 2 point touch
1MB FLASH EPROM
Interfaces
Asynchronous transmission method: RS-232C/ RS-422
Data length: 8/7 bits: 2/1 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400bps to 115.2kbps
Serial
80 characters per row, 60 rows
Auxiliary Input / Output(AUX)
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400 bps
Asynchronous Transmission Method, TTL level, non-procedure command interface
<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interface
Touch Switch Output: DC24V x 8 points; System Alarm Output: DC24V x 1 point; Buzzer Output: DC24V x 1 point
RUN Output: DC24V x 1 point; Remote Reset Input: DC24V x 1 point
Printer Output
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
Serial
16 x 12Keys/ screen; 1 or 2 point touch
32 x 20Keys/ screen; 1 or 2 point touch
8 x 8 dot font
8 x 16 dot font
Font Sizes
Character Size: Height and width can be expanded 1, 2, 4, or 8
Application Memory
Touch Panel (Resistive Film)
640 x 480 pixels
211mm(W) x 158mm(H)
Language Fonts
4 levels (via touch panel)
2 levels (via touch panel)
8 levels (via touch panel)
Language Fonts
8 x 8 dot font
No.of
Char. 8 x 16 dot font
Display 16 x 16 dot font
Resolution
Features
Display
GP675-SC11
Nominal Display Area
Blink/ Reverse Video
4 levels (via touch panel)
GP675-TC11
GP675-TC41-24VP
GP570-TV11
STN Color LCD
TFT Color LCD
8 colors (white, red, blue, green, yellow, purple, light blue, black)
64 colors (Tiling patterns make blends of colors possible)
Tiling patterns make blends of colors possible
CCFL (under normal temperatures
CCFL (under normal temperatures
CCFL (under normal temperatures
and humidity, lifespan = 20,000
and humidity, lifespan = 25,000
and humidity, lifespan = 25,000
hours) User replaceable
hours) User replaceable
hours) Non-replaceable by user.
Backlight
Resolution
Brightness Control
Type
Colors
CCFL (under normal temperatures
and humidity, lifespan= more than
30,000) User replaceable
Nominal Display Area
Attributes
Model
Items
Tool Connector
General Specifications
Asynchronous Transmission Method, TTL level, non-procedural command interface
[during screen development] used for transferring application screen data
[during RUN mode] used as Bar-code Reader or built-in 2-port function interface
Tool Connector
Interfaces
Auxiliary Input/
Output(AUX)
Printer Output
DC24V
DC24V
DC24V
DC24V
Touch switch output
(inching)
System alarm output
Buzzer output
Run output
x
x
x
x
8
1
1
1
points
point
point
point
Electrical
Item
Environmental
Electrical
GP577R-SC11
GP477R-EG11
Input voltage
AC85V to AC132V 50/60Hz
Power Consumption
50VA or less
Allowable Voltage Drop
Above 10M
0oC to 50oC
0oC to 40oC
20 to 85%RH
(non-condensing)
Structural
Power Consumption
50VA or less
GP675-TC11: 50W or less
GP675-TC41: 50VA or less
Allowable Voltage Drop
Up to 20ms
GP675-TC11: Up to 20 ms
GP675-TC41: Up to 2 ms
Voltage Endurance
AC1500V 20mA 1minute
(between charging and FG terminals)
GP675-TC11: AC1500V 20mA 1minute
GP675-TC41: AC1000V 10mA 1minute
(between charging and FG terminals)
Above 10M at DC500V
(between charging and FG terminals)
0oC to 40oC
0oC to 50oC
0oC to 40oC
0oC to 50oC
Equivalent to IP65f (Limited to front face of GP installed in panel)
External
Dimensions
274mm(W) x 216mm(H)
x 56.5Dmm(D)
(GP unit only)
317mm(W) x 243mm(H) 274mm(W) x 216mm(H)
x 85Dmm(D)
x 56.5Dmm(D)
(GP unit only)
(GP unit only)
Weight
Less than 3.5 kg (GP unit only)
Less than 2.5 kg
(GP unit only)
Less than 3.5 kg
(GP unit only)
Cooling Method
Less than 2.5 kg
(GP unit only)
Natural air circulation
*1 Japanese character input requires the Japanese version screen editor software.
0oC to 40oC
Storage Temperature
-10oC to 60oC
Ambient Humidity
30 to 85% RH (non-condensing)
Vibration Resistance
10 to 25 Hz (X,Y,Z directions 30 minutes 2G)
Noise Immunity
(via noise simulator)
Noise voltage: 1200Vp-p(GP675-TC41:1000Vp-p) Pulse length: 1 s Arise Time: 1ns
Atmosphere
Must not contain corrosive gas
Equivalent to IP65f (Limited to front face of GP installed in panel)
External Dimensions
317mm(W ) x 243mm(H) x 85mm(D) (GP only)
Weight
Less than 3.5kg (GP only)
346mm(W) x 272mm(H) x 81mm(D) (GP only)
Less than 3.8Kg (GP only)
Natural Air Circulation
171 mm(W) x 138mm(H) x 57mm(D)
(GP unit only)
Less than 0.95kg (GP unit only)
Model
Video
Display
32768 colors
Input Channels
3 channels
Transmission Method
NTSC
Number of Video Screens
1 (size, location, and channel are adjustable)
Color Control
tone, brightness, and contrast
Special Features
still (freezes video display), transparent color settings, and zoom
Input Signal Method
Synchronous Signal
Input Signal
Scanning Type
Characteristic
Flicker
Adjustment
Controls
GP570-TV11
Display Colors
Analog RGB
TTL level, negative true or positive true
Non-interlaced
8 level
Brightness
4 level
Horizontal Display Positioning
-16 to 15 pixels
Vertical Display Positioning
-8 to 7 pixels
Resolution
640 x 480 pixels
Dot-clock Range
25.175 MHz +/- 1%
*1 Japanese character input requires the Japanese version screen editor software.
Programmable Operator Interfaces
Up to 20ms
AC1500V 20mA 1minute
(between charging and FG terminals)
at DC500V (between charging and FG terminals)
Operation Temperature
Items
Must not contain corrosive gas
317mm(W) x 243mm(H)
x 85mm(D)
(GP unit only)
50VA or less
VM Display Specifications
20 to 85%RH
(non-condensing)
Noise voltage: 1000Vp-p;
Pulse length: 1 s; Arise Time: 1ns
Noise voltage: 1200 Vp-p
Pulse length: 1 s; Arise Time: 1ns
GP675-SC11
AC85 to AC132V 50/60Hz
Above 20M at DC500V
(between charging and FG terminals)
-20oC to 60oC
30 to 85%RH
(non-condensing)
Above 10M
Cooling Method
AC 1000V -10mA 1 minute (between charging and FG terminals)
10 to 25 Hz (X, Y, Z directions 30 minutes each 2G)
Vibration Resistance
Rating
AC85 to AC132V 50/60Hz
Rating
20W or less (TYP 13W)
-10oC to 60oC
30 to 85%RH (non-condensing)
GP377-LG11-24V
GP377-LG41-24V
DC 20.4V to DC 27.6V
at DC500V (between charging and FG terminals)
Atmosphere
Structural
GP377-SC11-24V
GP377-SC41-24V
Up to 2 ms
Insulation Resistance
Noise Immunity
(via noise simulator)
GP477R-EG41-24VP
Up to 20 ms
AC 1500V -20mA 1 minute
Ambient Humidity
GP577R-TC41-24VP
GP377R-TC11-24V
GP377R-TC41-24V
50W or less (TYP 20W)
Voltage Endurance
Ambient Operating
Temperature
Ambient Storage
Temperature
Environmental
GP577R-TC11
GP675-TC11
GP675-TC41-24VP
GP675-TC11: AC85 to AC132V 50/60Hz
GP675-TC41: DC19.2V to DC28.8V
Model
Insulation Resistance
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
General Specifications
Model
GP570-TV11
Input Voltage
Items
Programmable Operator Interfaces
Functional Specifications (Medium Size Display Units)
Functional Specifications
Model
Items
Type
GP570-TC**
GP571-TC11
TFT Color LCD
64 colors (Tiling patterns make
blends of colors possible)
Color
GP570-LG**
GP470-EG**
STN Color LCD
Monochrome LCD
High Intensity EL
8 colors (white, red, blue, green, yellow, purple, light blue, black)
Tiling patterns make blends of colors possible
CCFL (under normal temperatures and humidity, lifespan = 20,000 hours)
User replaceable.
Backlight
*1
black and white
640 x 400 pixels
Nominal Display Area
211mm(W) x 158mm(H)
192mm(W) x 120mm(H)
8 levels from touch panel
80 characters per row, 50 rows
8x16 dot font
80 characters per row, 30 rows
80 characters per row, 25 rows
40 characters per row, 30 rows
40 characters per row, 25 rows
1MB FLASH EPROM
Serial
Tool Connector
Interfaces
Auxiliary Input / Output(AUX)
Touch Switch Output: DC24V x 8 points; System Alarm Output: DC24V x 1 point; Buzzer Output: DC24V x 1 point
RUN Output: DC24V x 1 point; Remote Reset Input: DC24V x 1 point
Printer Output
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
General Specifications
Model
GP470-EG**
AC85 to AC132V 50/60 Hz
DC19.2 to DC28.8V
GP470-EG11: AC85 to AC132V 50/60Hz
GP470-EG21/ EG31: DC19.2 to DC28.8V
50VA or less
GP570-*C11: 50VA or less
GP570-*C21/ *C31: 50W or less
50W or less
GP470-EG11: 50VA or less
GP470-EG21/ EG31: 50W or less
Allowable Voltage Drop
Up to 20ms
GP570-*C11: Up to 20ms
GP570-*C21/ *C31: Up to 2ms
Up to 2ms
GP470-EG11: Up to 20ms
GP470-EG21/ EG31: Up to 2ms
Voltage Endurance
AC1500V 20mA 1 minute
(between charging and
FG terminals)
GP570-*C11: AC1500V 20mA 1 minute
GP570-*C21/ *C31: AC1000V 10mA 1 minute
(between charging and FG terminals)
AC1000V 10mA 1 minute
(between charging and
FG terminals)
GP470-EG11: AC1500V 20mA 1 minute
GP470-EG21-24VP/ EG31-24VP:
AC1000V 10mA 1 minute
(between charging and FG terminals)
Power Consumption
Electrical
Insulation Resistance
GP571-TC11
GP570-TC**
Above 10M
115mm(W) x 86mm(H)
GP570-SC**
30 to 85% RH (non-condensing)
40 characters per row, 30 rows
8x16 dot font
40 characters per row, 15 rows
16x16 dot font
20 characters per row, 15 rows
Character Size: Height and Width can be expanded 1, 2, 4, or 8 times.
Structural
Specifications
1MB FLASH EPROM
16 x 12 keys/ screen; 1 or 2 point touch
Function Keys
12
Operation Switches
One is located on the back of the case; the other is
the front face's function switch (OP.) key
Push-Lock (E-Stop) type switch
Serial
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400~38400 bps
Tool Connector
RS-232C Asynchronous Transmission Method, TTL level, non-procedure command interface
<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interface
DOUT: Two-point Open Controller: 5~24VDC, 50mA max
OP. : One-point Controller: 5~24VDC, 50mA max
Buzzer: One-point Controller: 5~24VDC, 0.1~0.3A
Push-Lock Switch: Single B-contact, rated 30V DC, 0.3A
General Specifications
Model
Items
GP370-SC**-24V*
GP370-LG**-24V*
GP270-SC**-24V*
Input Voltage
Electrical
GP270-SC**-24V*
GPH70-SC**-24V
GPH70-LG**-24V
DC20.4V to DC27.6V
20W or less (TYP10W)
12W or less (TYP8W)
12W or less (TYP10W)
Allowable Voltage Drop
UP to 2ms
Voltage Endurance
AC1000V 10mA 1 minute (between the live wire and ground terminals)*2
Above 20M
at DC500V (between the live wire and ground terminals)
20 to 85% RH (non-condensing)
0oC to 40oC
o
0 C to 50oC
10 to 25 Hz (X,Y,Z directions 30 minutes 2G)
Noise voltage: 1200Vp-p;
Pulse length: 1 s;
Arise Time: 1ns
Noise voltage: GP570-*C11: 1200Vp-p,
GP570-*C21-24VP/ *C31-24VP: 1000Vp-p;
Pulse length: 1 s; Arise Time: 1ns
Noise voltage: 1000Vp-p; Noise voltage: GP470-EG11: 1200Vp-p,
GP470-EG21-24VP/ EG31-24VP: 1000Vp-p;
Pulse length: 1 s;
Pulse length: 1 s; Arise Time: 1ns
Arise Time: 1ns
Atmosphere
Must not contain corrosive gas
Rating
Equivalent to IP65f (Limited to front face of GP installed in panel)
Weight
256KB FLASH EPROM
1MB FLASH EPROM
Operation Temperature
Vibration Endurance
115mm(W) x 86mm(H)
Push Button Switch
-10oC to 60oC
Ambient Humidity
CCFL (under normal temperatures
and humidity, lifespan = 25,000
hours) Non-replaceable by user.
2 levels from touch panel
8x8 dot font
Insulation Resistance
External Dimensions (mm)
black and white
8 levels from touch panel
Power Consumption
0oC to 50oC
0oC to 40oC
Storage Temperature
Noise Endurance
black and white
96mm(W) x 72mm(H)
Touch Panel (Resistive Film)
at DC500V (between the live wire and ground terminals)
Operation Temperature
Environmental
Specifications
Monochrome LCD
External Outputs
GP570-LG**
Input Voltage
STN Color LCD
8 colors (white, red, blue,
green, yellow, purple, light
blue, black) Tiling patterns
make blends of colors possible
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1
Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
Interfaces
GP570-*C11: AC85 to AC132V 50/60Hz
GP570-*C21/ *C31: DC19.2 to DC28.8V
Items
Monochrome LCD
Blink/ Reverse Video
Application Memory
Asynchronous Transmission Method, TTL level, non-procedure command interface
<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interface
GPH70-LG**-24V
320 x 240 pixels
Font Size
32 x 20 keys/ screen;
32 x 24 keys/ screen; 1 or 2 point touch
1 or 2 point touch
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400
GPH70-SC**-24V
CCFL (under normal temperatures and humidity, lifespan = 20,000 hours)
User replaceable.
Brightness Control
No. of
Char.
Display
Character Size: Height and Width can be expanded 1, 2, 4, or 8 times.
Touch Panel (Resistive Film)
black and white
Language Fonts
80 characters per row, 60 rows
3MB FLASH EPROM
Color
STN Color LCD
8 colors (white, red, blue,
green, yellow, purple, light
blue, black) Tiling patterns
make blends of colors possible
Contrast Control
8x8 dot font
Application Memory
Monochrome LCD
GP270-SC**-24V*
Features
Display
Functions
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1
Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
Font Size
STN Color LCD
8 colors (white, red, blue,
green, yellow, purple, light blue,
black) Tiling patterns make
blends of colors possible
GP270-SC**-24V*
Resolution
2 levels from touch panel
16x16 dot font
Type
Nominal Display Area
Brightness Control
Language Fonts
GP370-LG**-24V*
Backlight
Blink/ Reverse Video
Contrast Control
GP370-SC**-24V*
Amber (monochrome)
640 x 480 pixels
No. of
Char.
Display
Model
Items
CCFL (under normal temperatures
and humidity, lifespan = 25,000
hours) Non-replaceable by user.
Resolution
Features
Display
Functions
GP-570-SC**
317mm(W) x 243mm(H) x 85mm(D) (GP only)
Less than 3.5Kg (GP only)
Cooling System
Natural Air Circulation
*1 With GP570-TC21-24VP units that are Rev. E or later, the estimated lifetime of the backlight is 40,000 hours (assuming 24 hour operation).
*2 Japanese character input requires the Japanese version screen editor software.
Environmental
Specifications
274mm(W) x 216mm(H)
x 56.5mm(D)
(GP only)
Storage Temperature
-20oC to 60oC
Ambient Humidity
20 to 85% RH (non-condensing)
Vibration Endurance
Noise Endurance
Noise voltage: 1000Vp-p;
Pulse length: 1 s;
Arise Time: 1ns
Atmosphere
Must not contain corrosive gas
Rating
Less than 2.5Kg (GP only)
External Dimensions (mm)
Structural
Specifications
10 to 25 Hz (X,Y,Z directions 30 minutes 2G)
Weight
Equivalent to IP65f(Limited to front face of GP installed in panel)
171mm(W) x 138mm(H) x 57mm(D) (GP only) 172mm(W) x 127mm(H) x 58mm(D) (GP only) 237mm(W) x 173mm(H) x 52mm(D) (GP only)
Less than 0.9Kg (GP only)
Cooling System
Less than 0.8Kg (GP only)
Natural Air Circulation
*1 Japanese character input requires the Japanese version screen editor software.
*2 With GPH70-**41-24V units, the allowable power failure is AC500V, 10mA for 1 minute.
Programmable Operator Interfaces
Equivalent to IP63
Programmable Operator Interfaces
Less than 0.87Kg (GP only)
Optional Items
Data Transfer
Cable
Memory Loader
(Memory card included)
GP-PRO/PB
PC
Item
GPW-PB01M-V40
GPW-CB02
PSW-ED01-V20
for PLC communication
for PLC communication
for GP-H70 Series
for GP-H70 Series
RS-232C Cable (5m)
RS-422 Cable (5m)
RS-232C Cable (3m)
RS-422 Cable (3m)
PC
OS Version
Memory
Disk Space
Mouse
Printer
Ethernet
Protocol
Others
R
30MB minimum
53MB maximum *1
R
Mouse
Printer
Windows 95/98/NT compatible
R
Windows 95/98/NT compatible *2
*1 40MB maximum for CD-ROM version
*2 Printers with only Windows drivers cannot be used.
Item
Catalog
code
MS-Windows 95/98/NT
16MB, or higher
Disk Space
GP070-LD01-O
Pro-Server with Pro-studio
IBM Compatible
OS Version
Memory
Catalog
code
for Windows
GP410-IS00-O
(some PLCs require a different cable)
for easy debugging
RS-422 Connector
Terminal Exchange Adapter
Mitsubishi PLC
A Series /QnA Series /
FX Series
2 Port Adapter
Item
GPH70-C232-O
RS-422 Cable
for 2 Port Adapter
R
301.0
direct connection to programming port
Mitsubishi A Series PLC
Programming I/
F Cable (5m)
Mitsubishi FX Series PLC
Programming I/
F Cable (5m)
Siemens S5 Series PLC
Programming I/
F Cable (5m)
(top)
332 +1-0
Item
Panel Cut-out
85
317
302 +
- 0.5
7.5
227.0
direct connection to programming port
7.5
346
243
direct connection to programming port
Panel Cut-out
81
(top)
258 +1-0
GP070-MDCB11
257.0
GP070-MD11
GP-571T
GP-570VM
GP-570T
GP-570S
GP-570L
GP-577RT
GP-577RS
GP-675T
GP-675S
272
GP070-CN10-O
R
GPH70-C422-O
331.0
Catalog
code
R
External Dimensions (mm)
GP230-IS11-O
GP230-IS12-O (For Multi-link)
useful for multi-link connection
IBM compatible
MS-Windows 95/98/NT
16MB,or higher
10MB,or higher
Windows 95/98/NT compatible
Windows 95/98/NT compatible
10BASE-2/5/T
TCP/IP
Ethernet Hub,Ethernet cable
228 +
- 0.5
2 Way Comunicator Pro-Server with
Pro-Studio for
Windows
Screen Editor Software
GP-PRO/PB
for Windows
under 4-R2
GP430-IP11-O
GP000-IS11-O
connector type
for GP-H70
connector type
for GP-H70
RS-232C Cable
for GP-H70
Series With
D-SUB
connector (3m)
RS-232C
Conversion
Adapter
RS-422 Cable
for GP-H70
Series With
D-SUB
connector (3m)
RS-422
Conversion
Adapter
GP-377RT
GP-377S
GP-377L
GP-477RE
GP-470E
258.0
GP-370S
GP-370L
155.5
Panel Cut-out
(top)
56.5
274
259 +1-0
7.5
123.0
Protective Screen Cover
156 +1-0
5
138
CF Card Front Maintenace Unit
CF Card
GPH70-AP422-O
201+1-0
GPH70-D422
200.0
GPH70-AP232-O
GPH70-D232
171
216
Catalog
code
Panel Cut-out
57
(top)
under 4-R2
Item
GP077-CF10 (8MB)
GP077-CF20 (16MB)
Cover Sheets
GP070-CFFM10
(Under development)
Backlight Bulbs
GP-H70S
GP-H70L
GP-270S
GP-270L
GP370-DC10
157.5
User's Manual
(side)
(front)
52
Catalog
code
under 4-R3
(side)
(front)
(top)
MAX68
237
Catalog
code
GP675S-BL00-MS
GP675T-BL10-MS
GP570-BL00-MS *1
GP577RT-BL00-MS
GP370-BL00-MS
GP270-BL00-MS
*1 With GP570-TC21-24VP units that are Rev. E or
later, use backlight
model: GP577RT-BL00-MS
Programmable Operator Interfaces
GP-H70(S/L)
GP-270(S/L)
GP-370(S/L)
GP-470E
GP-570(T/S/L)
GP-571T
GP-675T
GP-477R/577R
GP-377R
GP-377(S/L)
GPH70-MM11-STD-ENG
GP270-MM11-ENG
GP370-MM11-ENG
GP470/570-MM21-ENG
GP470/570-MM21-ENG
GP470/570-MM21-ENG
GP675-MM21-ENG
GP477R/577R-MM11-ENG
GP377R-MM11-ENG
GP377-MM11-ENG
Panel Cut-out
58
158 +0.5
-0
173
Hard type
5 sheets / set
GP675-DF10-O
GP570-DF10-O
GP470-DF10-O
GP570/577-DF10
GP470/477-DF10
10 sheets / set
GP370-DF10-O
GP270-DF10-O
GPH70-DF10-O
5
127
Soft type
10 sheets / set
GP570-COVER-10P
GP470-COVER-10P
GP570/577-COVER-10P
GP470/477-COVER-10P
20 sheets / set
GP370-COVER-20P
GP270-COVER-20P
172
112.5
(top)
113 +0.5
-0
Item
123.5 +1-0
Item
GP430-IP10-O
(side)
(front)
(side)
(front)
Catalog
code
under 4-R2
under 4-R3
(front)
(side)
(front)
Programmable Operator Interfaces
(side)
Programmable Operator Interfaces
IBM Compatible Industrial Panel Computers
Panel displays that can replace your CRT, keyboard
and mouse, and save valuable space
PL-X900 Series
PL-6700 Series
FP-570T
PL-5700 Series
VGA Display
PL-3700S
FP-770T/FP-775S
XGY Display
PL-B900 Series
Programmable Operator Interface for Industrial Controllers
Programmable Operator Interface with I/O
control features
GP77R Series
100MHz RISC CPU
and 2-way Networking
GLC300T
GP70 Series
32bit RISC CPU
GP-PRO/PB
for Windows
Screen Editor
Pro-Control Editor
GLC100 Series
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
For printing purposes, the colors in this catalog may differ from those of the actual unit.
Actual user screens may differ from the screens shown here.
LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are brighter
than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects.
Microsoft Windows 95,98 WindowsNT are registered trademarks of the Microsoft Corporation.
All product names used in this catalog are the registered trademarks of their respective companies.
All information contained in this catalog is subject to change without notice.
c Copyright 2000 Digital Electronics Corporation All Rights Reserved.
Global Head Office
European Head Office
Digital Electronics Corporation
8-2-52 Nanko-higashi Suminoe-ku, Osaka 559-0031 JAPAN
Tel: +81-(0)6-6613-3116 Fax: +81-(0)6-6613-5888
http://www.pro-face.com/ [email protected]
Pro-face HMI B.V.
Amsteldijk 166, 1079 LH Amsterdam THE NETHERLANDS
Tel: +31-(0)20-6464-134 Fax: +31-(0)20-6464-358
http://www.proface.com/ [email protected]
South Korea
France
Pro-face Korea Co., Ltd.
Room #701, Jaeyoung Building 678-10, Deungchon-dong,
Kandseo-ku, Seoul
157-030 KOREA
Tel: +82-(0)2-658-6835 Fax: +82-(0)2-3664-6839
http://www.proface.co.kr/ [email protected]
Taiwan
Pro-face France
Le Vinci 1, rue Henri Becquerel, 77290 Mithry-Mory FRANCE
Tel: +33-(0)1-60-21-22-91 Fax: +33-(0)1-60-21-22-92
Italy
Pro-face HMI B.V. Italy
Via Carcano 44, 20033 Desio (MI) ITALY
Tel: +39-0362-33-71-63 Fax: +39-0362-30-77-25
Pro-face Taiwan Co., Ltd.
3F-1, No. 315, Sec. 5 Nan King East Road, Taipei 105
TAIWAN R.O.C.
Tel: +886-(0)2-2760-0237 Fax: +886-(0)2-2760-0257
http://www.proface.com.tw/ [email protected]
Germany
North/South America
Scandinavia
Pro-face America, Inc.
2190-E Gladstone Court, Glendale Heights IL 60139 U.S.A.
Tel: +1-630-351-1101 Fax: +1-630-351-1102
http://www.profaceamerica.com/
[email protected]
Pro-face HMI B.V. Scandinavia
Danmarksvej 30 L1, 8660 Skanderborg DENMARK
Tel: +45-70-22-0122 Fax: +45-70-22-0133
Pro-face HMI B.V. Germany
Konigstr. 31, 70173 Stuttgart GERMANY
Tel: +49-(0)711-227-1020 Fax: +49-(0)711-227-1021
[email protected]
United Kingdom
Pro-face UK, Ltd.
The Venture Centre, The Science Park, Coventry CV4 7EZ ENGLAND
NP000223-GPALL-02E12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement